[deliverable/linux.git] / drivers / usb / host / ehci-fsl.c

/*
 * (C) Copyright David Brownell 2000-2002
 * Copyright (c) 2005 MontaVista Software
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
 * by Hunter Wu.
 */

#include <linux/platform_device.h>
#include <linux/fsl_devices.h>

#include "ehci-fsl.h"

/* FIXME: Power Managment is un-ported so temporarily disable it */
#undef CONFIG_PM

/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */

/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */

/**
 * usb_hcd_fsl_probe - initialize FSL-based HCDs
 * @drvier: Driver to be used for this HCD
 * @pdev: USB Host Controller being probed
 * Context: !in_interrupt()
 *
 * Allocates basic resources for this USB host controller.
 *
 */
int usb_hcd_fsl_probe(const struct hc_driver *driver,
		      struct platform_device *pdev)
{
	struct fsl_usb2_platform_data *pdata;
	struct usb_hcd *hcd;
	struct resource *res;
	int irq;
	int retval;
	unsigned int temp;

	pr_debug("initializing FSL-SOC USB Controller\n");

	/* Need platform data for setup */
	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
	if (!pdata) {
		dev_err(&pdev->dev,
			"No platform data for %s.\n", pdev->dev.bus_id);
		return -ENODEV;
	}

	/*
	 * This is a host mode driver, verify that we're supposed to be
	 * in host mode.
	 */
	if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
	      (pdata->operating_mode == FSL_USB2_MPH_HOST))) {
		dev_err(&pdev->dev,
			"Non Host Mode configured for %s. Wrong driver linked.\n",
			pdev->dev.bus_id);
		return -ENODEV;
	}

	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (!res) {
		dev_err(&pdev->dev,
			"Found HC with no IRQ. Check %s setup!\n",
			pdev->dev.bus_id);
		return -ENODEV;
	}
	irq = res->start;

	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
	if (!hcd) {
		retval = -ENOMEM;
		goto err1;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev,
			"Found HC with no register addr. Check %s setup!\n",
			pdev->dev.bus_id);
		retval = -ENODEV;
		goto err2;
	}
	hcd->rsrc_start = res->start;
	hcd->rsrc_len = res->end - res->start + 1;
	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
				driver->description)) {
		dev_dbg(&pdev->dev, "controller already in use\n");
		retval = -EBUSY;
		goto err2;
	}
	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);

	if (hcd->regs == NULL) {
		dev_dbg(&pdev->dev, "error mapping memory\n");
		retval = -EFAULT;
		goto err3;
	}

	/* Enable USB controller */
	temp = in_be32(hcd->regs + 0x500);
	out_be32(hcd->regs + 0x500, temp | 0x4);

	/* Set to Host mode */
	temp = in_le32(hcd->regs + 0x1a8);
	out_le32(hcd->regs + 0x1a8, temp | 0x3);

	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (retval != 0)
		goto err4;
	return retval;

      err4:
	iounmap(hcd->regs);
      err3:
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
      err2:
	usb_put_hcd(hcd);
      err1:
	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
	return retval;
}

/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */

/**
 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
 * @dev: USB Host Controller being removed
 * Context: !in_interrupt()
 *
 * Reverses the effect of usb_hcd_fsl_probe().
 *
 */
void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
{
	usb_remove_hcd(hcd);
	iounmap(hcd->regs);
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	usb_put_hcd(hcd);
}

static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
			      enum fsl_usb2_phy_modes phy_mode,
			      unsigned int port_offset)
{
	u32 portsc = 0;
	switch (phy_mode) {
	case FSL_USB2_PHY_ULPI:
		portsc |= PORT_PTS_ULPI;
		break;
	case FSL_USB2_PHY_SERIAL:
		portsc |= PORT_PTS_SERIAL;
		break;
	case FSL_USB2_PHY_UTMI_WIDE:
		portsc |= PORT_PTS_PTW;
		/* fall through */
	case FSL_USB2_PHY_UTMI:
		portsc |= PORT_PTS_UTMI;
		break;
	case FSL_USB2_PHY_NONE:
		break;
	}
	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
}

static void mpc83xx_usb_setup(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct fsl_usb2_platform_data *pdata;
	void __iomem *non_ehci = hcd->regs;

	pdata =
	    (struct fsl_usb2_platform_data *)hcd->self.controller->
	    platform_data;
	/* Enable PHY interface in the control reg. */
	out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
	out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);

#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
	/*
	 * Turn on cache snooping hardware, since some PowerPC platforms
	 * wholly rely on hardware to deal with cache coherent
	 */

	/* Setup Snooping for all the 4GB space */
	/* SNOOP1 starts from 0x0, size 2G */
	out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
	/* SNOOP2 starts from 0x80000000, size 2G */
	out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
#endif

	if (pdata->operating_mode == FSL_USB2_DR_HOST)
		mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);

	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
		unsigned int chip, rev, svr;

		svr = mfspr(SPRN_SVR);
		chip = svr >> 16;
		rev = (svr >> 4) & 0xf;

		/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
		if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
			ehci->has_fsl_port_bug = 1;

		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
			mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
			mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
	}

	/* put controller in host mode. */
	ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
	out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
}

/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
	mpc83xx_usb_setup(ehci_to_hcd(ehci));
	ehci_port_power(ehci, 0);

	return 0;
}

/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int retval;

	/* EHCI registers start at offset 0x100 */
	ehci->caps = hcd->regs + 0x100;
	ehci->regs = hcd->regs + 0x100 +
	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
	dbg_hcs_params(ehci, "reset");
	dbg_hcc_params(ehci, "reset");

	/* cache this readonly data; minimize chip reads */
	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);

	retval = ehci_halt(ehci);
	if (retval)
		return retval;

	/* data structure init */
	retval = ehci_init(hcd);
	if (retval)
		return retval;

	ehci->is_tdi_rh_tt = 1;

	ehci->sbrn = 0x20;

	ehci_reset(ehci);

	retval = ehci_fsl_reinit(ehci);
	return retval;
}

static const struct hc_driver ehci_fsl_hc_driver = {
	.description = hcd_name,
	.product_desc = "Freescale On-Chip EHCI Host Controller",
	.hcd_priv_size = sizeof(struct ehci_hcd),

	/*
	 * generic hardware linkage
	 */
	.irq = ehci_irq,
	.flags = HCD_USB2,

	/*
	 * basic lifecycle operations
	 */
	.reset = ehci_fsl_setup,
	.start = ehci_run,
#ifdef	CONFIG_PM
	.suspend = ehci_bus_suspend,
	.resume = ehci_bus_resume,
#endif
	.stop = ehci_stop,
	.shutdown = ehci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue = ehci_urb_enqueue,
	.urb_dequeue = ehci_urb_dequeue,
	.endpoint_disable = ehci_endpoint_disable,

	/*
	 * scheduling support
	 */
	.get_frame_number = ehci_get_frame,

	/*
	 * root hub support
	 */
	.hub_status_data = ehci_hub_status_data,
	.hub_control = ehci_hub_control,
	.bus_suspend = ehci_bus_suspend,
	.bus_resume = ehci_bus_resume,
};

static int ehci_fsl_drv_probe(struct platform_device *pdev)
{
	if (usb_disabled())
		return -ENODEV;

	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
}

static int ehci_fsl_drv_remove(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);

	usb_hcd_fsl_remove(hcd, pdev);

	return 0;
}

MODULE_ALIAS("fsl-ehci");

static struct platform_driver ehci_fsl_driver = {
	.probe = ehci_fsl_drv_probe,
	.remove = ehci_fsl_drv_remove,
	.shutdown = usb_hcd_platform_shutdown,
	.driver = {
		   .name = "fsl-ehci",
		   },
};
Commit	Line	Data
80cb9aee RV	1	/*
	2	* (C) Copyright David Brownell 2000-2002
	3	* Copyright (c) 2005 MontaVista Software
	4	*
	5	* This program is free software; you can redistribute it and/or modify it
	6	* under the terms of the GNU General Public License as published by the
	7	* Free Software Foundation; either version 2 of the License, or (at your
	8	* option) any later version.
	9	*
	10	* This program is distributed in the hope that it will be useful, but
	11	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	12	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	13	* for more details.
	14	*
	15	* You should have received a copy of the GNU General Public License
	16	* along with this program; if not, write to the Free Software Foundation,
	17	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	18	*
	19	* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
	20	* by Hunter Wu.
	21	*/
	22
	23	#include <linux/platform_device.h>
	24	#include <linux/fsl_devices.h>
	25
	26	#include "ehci-fsl.h"
	27
	28	/* FIXME: Power Managment is un-ported so temporarily disable it */
	29	#undef CONFIG_PM
	30
	31	/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
	32
	33	/* configure so an HC device and id are always provided */
	34	/* always called with process context; sleeping is OK */
	35
	36	/**
	37	* usb_hcd_fsl_probe - initialize FSL-based HCDs
	38	* @drvier: Driver to be used for this HCD
	39	* @pdev: USB Host Controller being probed
	40	* Context: !in_interrupt()
	41	*
	42	* Allocates basic resources for this USB host controller.
	43	*
	44	*/
	45	int usb_hcd_fsl_probe(const struct hc_driver *driver,
	46	struct platform_device *pdev)
	47	{
	48	struct fsl_usb2_platform_data *pdata;
	49	struct usb_hcd *hcd;
	50	struct resource *res;
	51	int irq;
	52	int retval;
	53	unsigned int temp;
	54
	55	pr_debug("initializing FSL-SOC USB Controller\n");
	56
	57	/* Need platform data for setup */
	58	pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
	59	if (!pdata) {
	60	dev_err(&pdev->dev,
	61	"No platform data for %s.\n", pdev->dev.bus_id);
	62	return -ENODEV;
	63	}
	64
65	/*
66	* This is a host mode driver, verify that we're supposed to be
67	* in host mode.
68	*/
69	if (!((pdata->operating_mode == FSL_USB2_DR_HOST) \|\|
70	(pdata->operating_mode == FSL_USB2_MPH_HOST))) {
71	dev_err(&pdev->dev,
72	"Non Host Mode configured for %s. Wrong driver linked.\n",
73	pdev->dev.bus_id);
74	return -ENODEV;
75	}
76
77	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
78	if (!res) {
79	dev_err(&pdev->dev,
80	"Found HC with no IRQ. Check %s setup!\n",
81	pdev->dev.bus_id);
82	return -ENODEV;
83	}
84	irq = res->start;
85
86	hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
87	if (!hcd) {
88	retval = -ENOMEM;
89	goto err1;
90	}
91
92	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
93	if (!res) {
94	dev_err(&pdev->dev,
95	"Found HC with no register addr. Check %s setup!\n",
96	pdev->dev.bus_id);
97	retval = -ENODEV;
98	goto err2;
99	}
100	hcd->rsrc_start = res->start;
101	hcd->rsrc_len = res->end - res->start + 1;
102	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
103	driver->description)) {
104	dev_dbg(&pdev->dev, "controller already in use\n");
105	retval = -EBUSY;
106	goto err2;
107	}
108	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
109
110	if (hcd->regs == NULL) {
111	dev_dbg(&pdev->dev, "error mapping memory\n");
112	retval = -EFAULT;
113	goto err3;
114	}
115
116	/* Enable USB controller */
117	temp = in_be32(hcd->regs + 0x500);
118	out_be32(hcd->regs + 0x500, temp \| 0x4);
119
120	/* Set to Host mode */
121	temp = in_le32(hcd->regs + 0x1a8);
122	out_le32(hcd->regs + 0x1a8, temp \| 0x3);
123
d54b5caa	124	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
80cb9aee RV	125	if (retval != 0)
	126	goto err4;
	127	return retval;
	128
	129	err4:
	130	iounmap(hcd->regs);
	131	err3:
	132	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	133	err2:
	134	usb_put_hcd(hcd);
	135	err1:
	136	dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
	137	return retval;
	138	}
	139
	140	/* may be called without controller electrically present */
	141	/* may be called with controller, bus, and devices active */
	142
	143	/**
	144	* usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
	145	* @dev: USB Host Controller being removed
	146	* Context: !in_interrupt()
	147	*
	148	* Reverses the effect of usb_hcd_fsl_probe().
	149	*
	150	*/
	151	void usb_hcd_fsl_remove(struct usb_hcd hcd, struct platform_device pdev)
	152	{
	153	usb_remove_hcd(hcd);
	154	iounmap(hcd->regs);
	155	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	156	usb_put_hcd(hcd);
	157	}
	158
	159	static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
	160	enum fsl_usb2_phy_modes phy_mode,
	161	unsigned int port_offset)
	162	{
499003e8	163	u32 portsc = 0;
80cb9aee RV	164	switch (phy_mode) {
	165	case FSL_USB2_PHY_ULPI:
	166	portsc \|= PORT_PTS_ULPI;
	167	break;
	168	case FSL_USB2_PHY_SERIAL:
	169	portsc \|= PORT_PTS_SERIAL;
	170	break;
	171	case FSL_USB2_PHY_UTMI_WIDE:
	172	portsc \|= PORT_PTS_PTW;
	173	/* fall through */
	174	case FSL_USB2_PHY_UTMI:
	175	portsc \|= PORT_PTS_UTMI;
	176	break;
	177	case FSL_USB2_PHY_NONE:
	178	break;
	179	}
083522d7	180	ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
80cb9aee RV	181	}
	182
	183	static void mpc83xx_usb_setup(struct usb_hcd *hcd)
	184	{
	185	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	186	struct fsl_usb2_platform_data *pdata;
	187	void __iomem *non_ehci = hcd->regs;
	188
	189	pdata =
	190	(struct fsl_usb2_platform_data *)hcd->self.controller->
	191	platform_data;
	192	/* Enable PHY interface in the control reg. */
	193	out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
	194	out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
	195
40acc095 LY	196	#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
	197	/*
	198	* Turn on cache snooping hardware, since some PowerPC platforms
	199	* wholly rely on hardware to deal with cache coherent
	200	*/
	201
	202	/* Setup Snooping for all the 4GB space */
	203	/* SNOOP1 starts from 0x0, size 2G */
	204	out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 \| SNOOP_SIZE_2GB);
	205	/* SNOOP2 starts from 0x80000000, size 2G */
	206	out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 \| SNOOP_SIZE_2GB);
	207	#endif
	208
80cb9aee RV	209	if (pdata->operating_mode == FSL_USB2_DR_HOST)
	210	mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
	211
	212	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
8cd42e97 KG	213	unsigned int chip, rev, svr;
	214
	215	svr = mfspr(SPRN_SVR);
	216	chip = svr >> 16;
	217	rev = (svr >> 4) & 0xf;
	218
	219	/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
	220	if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
	221	ehci->has_fsl_port_bug = 1;
	222
80cb9aee RV	223	if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
	224	mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
	225	if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
	226	mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
	227	}
	228
	229	/* put controller in host mode. */
083522d7	230	ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
80cb9aee RV	231	out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
	232	out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
	233	out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
	234	}
	235
	236	/* called after powerup, by probe or system-pm "wakeup" */
	237	static int ehci_fsl_reinit(struct ehci_hcd *ehci)
	238	{
	239	mpc83xx_usb_setup(ehci_to_hcd(ehci));
	240	ehci_port_power(ehci, 0);
	241
	242	return 0;
	243	}
	244
	245	/* called during probe() after chip reset completes */
	246	static int ehci_fsl_setup(struct usb_hcd *hcd)
	247	{
	248	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	249	int retval;
	250
	251	/* EHCI registers start at offset 0x100 */
	252	ehci->caps = hcd->regs + 0x100;
	253	ehci->regs = hcd->regs + 0x100 +
083522d7	254	HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
80cb9aee RV	255	dbg_hcs_params(ehci, "reset");
	256	dbg_hcc_params(ehci, "reset");
	257
	258	/* cache this readonly data; minimize chip reads */
083522d7	259	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
80cb9aee RV	260
	261	retval = ehci_halt(ehci);
	262	if (retval)
	263	return retval;
	264
	265	/* data structure init */
	266	retval = ehci_init(hcd);
	267	if (retval)
	268	return retval;
	269
	270	ehci->is_tdi_rh_tt = 1;
	271
	272	ehci->sbrn = 0x20;
	273
	274	ehci_reset(ehci);
	275
	276	retval = ehci_fsl_reinit(ehci);
	277	return retval;
	278	}
	279
	280	static const struct hc_driver ehci_fsl_hc_driver = {
	281	.description = hcd_name,
	282	.product_desc = "Freescale On-Chip EHCI Host Controller",
	283	.hcd_priv_size = sizeof(struct ehci_hcd),
	284
	285	/*
	286	* generic hardware linkage
	287	*/
	288	.irq = ehci_irq,
	289	.flags = HCD_USB2,
	290
	291	/*
	292	* basic lifecycle operations
	293	*/
	294	.reset = ehci_fsl_setup,
	295	.start = ehci_run,
	296	#ifdef CONFIG_PM
	297	.suspend = ehci_bus_suspend,
	298	.resume = ehci_bus_resume,
	299	#endif
	300	.stop = ehci_stop,
64a21d02	301	.shutdown = ehci_shutdown,
80cb9aee RV	302
	303	/*
	304	* managing i/o requests and associated device resources
	305	*/
	306	.urb_enqueue = ehci_urb_enqueue,
	307	.urb_dequeue = ehci_urb_dequeue,
	308	.endpoint_disable = ehci_endpoint_disable,
	309
	310	/*
	311	* scheduling support
	312	*/
	313	.get_frame_number = ehci_get_frame,
	314
	315	/*
	316	* root hub support
	317	*/
	318	.hub_status_data = ehci_hub_status_data,
	319	.hub_control = ehci_hub_control,
	320	.bus_suspend = ehci_bus_suspend,
	321	.bus_resume = ehci_bus_resume,
	322	};
	323
	324	static int ehci_fsl_drv_probe(struct platform_device *pdev)
	325	{
	326	if (usb_disabled())
	327	return -ENODEV;
	328
	329	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
	330	}
	331
	332	static int ehci_fsl_drv_remove(struct platform_device *pdev)
	333	{
	334	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	335
	336	usb_hcd_fsl_remove(hcd, pdev);
	337
	338	return 0;
	339	}
	340
01cced25	341	MODULE_ALIAS("fsl-ehci");
80cb9aee	342
01cced25	343	static struct platform_driver ehci_fsl_driver = {
80cb9aee RV	344	.probe = ehci_fsl_drv_probe,
80cb9aee RV	345	.remove = ehci_fsl_drv_remove,
64a21d02	346	.shutdown = usb_hcd_platform_shutdown,
80cb9aee	347	.driver = {
01cced25	348	.name = "fsl-ehci",
80cb9aee RV	349	},
80cb9aee RV	350	};