Commit | Line | Data |
---|---|---|
e96ffe2f TP |
1 | /* |
2 | * drivers/usb/host/ehci-orion.c | |
3 | * | |
4 | * Tzachi Perelstein <tzachi@marvell.com> | |
5 | * | |
6 | * This file is licensed under the terms of the GNU General Public | |
7 | * License version 2. This program is licensed "as is" without any | |
8 | * warranty of any kind, whether express or implied. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/module.h> | |
13 | #include <linux/platform_device.h> | |
92aecfa9 | 14 | #include <linux/mbus.h> |
8c869eda | 15 | #include <linux/clk.h> |
6f088f1d | 16 | #include <plat/ehci-orion.h> |
e96ffe2f TP |
17 | |
18 | #define rdl(off) __raw_readl(hcd->regs + (off)) | |
19 | #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) | |
20 | ||
e96ffe2f TP |
21 | #define USB_CMD 0x140 |
22 | #define USB_MODE 0x1a8 | |
92aecfa9 LB |
23 | #define USB_CAUSE 0x310 |
24 | #define USB_MASK 0x314 | |
25 | #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) | |
26 | #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) | |
e96ffe2f TP |
27 | #define USB_IPG 0x360 |
28 | #define USB_PHY_PWR_CTRL 0x400 | |
29 | #define USB_PHY_TX_CTRL 0x420 | |
30 | #define USB_PHY_RX_CTRL 0x430 | |
31 | #define USB_PHY_IVREF_CTRL 0x440 | |
32 | #define USB_PHY_TST_GRP_CTRL 0x450 | |
33 | ||
34 | /* | |
35 | * Implement Orion USB controller specification guidelines | |
36 | */ | |
fb6f5529 | 37 | static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) |
e96ffe2f | 38 | { |
fb6f5529 | 39 | /* The below GLs are according to the Orion Errata document */ |
e96ffe2f TP |
40 | /* |
41 | * Clear interrupt cause and mask | |
42 | */ | |
43 | wrl(USB_CAUSE, 0); | |
44 | wrl(USB_MASK, 0); | |
45 | ||
46 | /* | |
47 | * Reset controller | |
48 | */ | |
49 | wrl(USB_CMD, rdl(USB_CMD) | 0x2); | |
50 | while (rdl(USB_CMD) & 0x2); | |
51 | ||
52 | /* | |
53 | * GL# USB-10: Set IPG for non start of frame packets | |
54 | * Bits[14:8]=0xc | |
55 | */ | |
56 | wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00); | |
57 | ||
58 | /* | |
59 | * GL# USB-9: USB 2.0 Power Control | |
60 | * BG_VSEL[7:6]=0x1 | |
61 | */ | |
62 | wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40); | |
63 | ||
64 | /* | |
65 | * GL# USB-1: USB PHY Tx Control - force calibration to '8' | |
66 | * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8 | |
67 | */ | |
68 | wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040); | |
69 | ||
70 | /* | |
71 | * GL# USB-3 GL# USB-9: USB PHY Rx Control | |
72 | * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0, | |
73 | * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1 | |
74 | */ | |
75 | wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010); | |
76 | ||
77 | /* | |
78 | * GL# USB-3 GL# USB-9: USB PHY IVREF Control | |
79 | * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0 | |
80 | */ | |
81 | wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32); | |
82 | ||
83 | /* | |
84 | * GL# USB-3 GL# USB-9: USB PHY Test Group Control | |
85 | * REG_FIFO_SQ_RST[15]=0 | |
86 | */ | |
87 | wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000); | |
88 | ||
89 | /* | |
90 | * Stop and reset controller | |
91 | */ | |
92 | wrl(USB_CMD, rdl(USB_CMD) & ~0x1); | |
93 | wrl(USB_CMD, rdl(USB_CMD) | 0x2); | |
94 | while (rdl(USB_CMD) & 0x2); | |
95 | ||
96 | /* | |
97 | * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 | |
98 | * TBD: This need to be done after each reset! | |
99 | * GL# USB-4 Setup USB Host mode | |
100 | */ | |
101 | wrl(USB_MODE, 0x13); | |
102 | } | |
103 | ||
104 | static int ehci_orion_setup(struct usb_hcd *hcd) | |
105 | { | |
106 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
107 | int retval; | |
108 | ||
bcf40815 MC |
109 | hcd->has_tt = 1; |
110 | ||
e96ffe2f TP |
111 | retval = ehci_halt(ehci); |
112 | if (retval) | |
113 | return retval; | |
114 | ||
115 | /* | |
116 | * data structure init | |
117 | */ | |
118 | retval = ehci_init(hcd); | |
119 | if (retval) | |
120 | return retval; | |
121 | ||
bcf40815 | 122 | ehci_reset(ehci); |
129bd474 | 123 | |
e96ffe2f TP |
124 | ehci_port_power(ehci, 0); |
125 | ||
126 | return retval; | |
127 | } | |
128 | ||
129 | static const struct hc_driver ehci_orion_hc_driver = { | |
130 | .description = hcd_name, | |
131 | .product_desc = "Marvell Orion EHCI", | |
132 | .hcd_priv_size = sizeof(struct ehci_hcd), | |
133 | ||
134 | /* | |
135 | * generic hardware linkage | |
136 | */ | |
137 | .irq = ehci_irq, | |
138 | .flags = HCD_MEMORY | HCD_USB2, | |
139 | ||
140 | /* | |
141 | * basic lifecycle operations | |
142 | */ | |
143 | .reset = ehci_orion_setup, | |
144 | .start = ehci_run, | |
e96ffe2f TP |
145 | .stop = ehci_stop, |
146 | .shutdown = ehci_shutdown, | |
147 | ||
148 | /* | |
149 | * managing i/o requests and associated device resources | |
150 | */ | |
151 | .urb_enqueue = ehci_urb_enqueue, | |
152 | .urb_dequeue = ehci_urb_dequeue, | |
153 | .endpoint_disable = ehci_endpoint_disable, | |
b18ffd49 | 154 | .endpoint_reset = ehci_endpoint_reset, |
e96ffe2f TP |
155 | |
156 | /* | |
157 | * scheduling support | |
158 | */ | |
159 | .get_frame_number = ehci_get_frame, | |
160 | ||
161 | /* | |
162 | * root hub support | |
163 | */ | |
164 | .hub_status_data = ehci_hub_status_data, | |
165 | .hub_control = ehci_hub_control, | |
166 | .bus_suspend = ehci_bus_suspend, | |
167 | .bus_resume = ehci_bus_resume, | |
a8e51775 | 168 | .relinquish_port = ehci_relinquish_port, |
3a31155c | 169 | .port_handed_over = ehci_port_handed_over, |
914b7012 AS |
170 | |
171 | .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | |
e96ffe2f TP |
172 | }; |
173 | ||
92aecfa9 LB |
174 | static void __init |
175 | ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, | |
63a9332b | 176 | const struct mbus_dram_target_info *dram) |
92aecfa9 LB |
177 | { |
178 | int i; | |
179 | ||
180 | for (i = 0; i < 4; i++) { | |
181 | wrl(USB_WINDOW_CTRL(i), 0); | |
182 | wrl(USB_WINDOW_BASE(i), 0); | |
183 | } | |
184 | ||
185 | for (i = 0; i < dram->num_cs; i++) { | |
63a9332b | 186 | const struct mbus_dram_window *cs = dram->cs + i; |
92aecfa9 LB |
187 | |
188 | wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) | | |
189 | (cs->mbus_attr << 8) | | |
190 | (dram->mbus_dram_target_id << 4) | 1); | |
191 | wrl(USB_WINDOW_BASE(i), cs->base); | |
192 | } | |
193 | } | |
194 | ||
dc2f2b75 | 195 | static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) |
e96ffe2f | 196 | { |
92aecfa9 | 197 | struct orion_ehci_data *pd = pdev->dev.platform_data; |
63a9332b | 198 | const struct mbus_dram_target_info *dram; |
e96ffe2f TP |
199 | struct resource *res; |
200 | struct usb_hcd *hcd; | |
201 | struct ehci_hcd *ehci; | |
8c869eda | 202 | struct clk *clk; |
e96ffe2f TP |
203 | void __iomem *regs; |
204 | int irq, err; | |
205 | ||
206 | if (usb_disabled()) | |
207 | return -ENODEV; | |
208 | ||
209 | pr_debug("Initializing Orion-SoC USB Host Controller\n"); | |
210 | ||
211 | irq = platform_get_irq(pdev, 0); | |
212 | if (irq <= 0) { | |
213 | dev_err(&pdev->dev, | |
214 | "Found HC with no IRQ. Check %s setup!\n", | |
7071a3ce | 215 | dev_name(&pdev->dev)); |
e96ffe2f TP |
216 | err = -ENODEV; |
217 | goto err1; | |
218 | } | |
219 | ||
220 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
221 | if (!res) { | |
222 | dev_err(&pdev->dev, | |
223 | "Found HC with no register addr. Check %s setup!\n", | |
7071a3ce | 224 | dev_name(&pdev->dev)); |
e96ffe2f TP |
225 | err = -ENODEV; |
226 | goto err1; | |
227 | } | |
228 | ||
5672b7e6 | 229 | if (!request_mem_region(res->start, resource_size(res), |
e96ffe2f TP |
230 | ehci_orion_hc_driver.description)) { |
231 | dev_dbg(&pdev->dev, "controller already in use\n"); | |
232 | err = -EBUSY; | |
233 | goto err1; | |
234 | } | |
235 | ||
5672b7e6 | 236 | regs = ioremap(res->start, resource_size(res)); |
e96ffe2f TP |
237 | if (regs == NULL) { |
238 | dev_dbg(&pdev->dev, "error mapping memory\n"); | |
239 | err = -EFAULT; | |
240 | goto err2; | |
241 | } | |
242 | ||
8c869eda AL |
243 | /* Not all platforms can gate the clock, so it is not |
244 | an error if the clock does not exists. */ | |
245 | clk = clk_get(&pdev->dev, NULL); | |
246 | if (!IS_ERR(clk)) { | |
247 | clk_prepare_enable(clk); | |
248 | clk_put(clk); | |
249 | } | |
250 | ||
e96ffe2f | 251 | hcd = usb_create_hcd(&ehci_orion_hc_driver, |
7071a3ce | 252 | &pdev->dev, dev_name(&pdev->dev)); |
e96ffe2f TP |
253 | if (!hcd) { |
254 | err = -ENOMEM; | |
255 | goto err3; | |
256 | } | |
257 | ||
258 | hcd->rsrc_start = res->start; | |
5672b7e6 | 259 | hcd->rsrc_len = resource_size(res); |
e96ffe2f TP |
260 | hcd->regs = regs; |
261 | ||
262 | ehci = hcd_to_ehci(hcd); | |
263 | ehci->caps = hcd->regs + 0x100; | |
264 | ehci->regs = hcd->regs + 0x100 + | |
c430131a | 265 | HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); |
e96ffe2f | 266 | ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); |
a8e51775 | 267 | hcd->has_tt = 1; |
e96ffe2f TP |
268 | ehci->sbrn = 0x20; |
269 | ||
92aecfa9 LB |
270 | /* |
271 | * (Re-)program MBUS remapping windows if we are asked to. | |
272 | */ | |
63a9332b AL |
273 | dram = mv_mbus_dram_info(); |
274 | if (dram) | |
275 | ehci_orion_conf_mbus_windows(hcd, dram); | |
92aecfa9 | 276 | |
e96ffe2f | 277 | /* |
fb6f5529 | 278 | * setup Orion USB controller. |
e96ffe2f | 279 | */ |
fb6f5529 RS |
280 | switch (pd->phy_version) { |
281 | case EHCI_PHY_NA: /* dont change USB phy settings */ | |
282 | break; | |
283 | case EHCI_PHY_ORION: | |
284 | orion_usb_phy_v1_setup(hcd); | |
285 | break; | |
286 | case EHCI_PHY_DD: | |
287 | case EHCI_PHY_KW: | |
288 | default: | |
289 | printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n"); | |
290 | } | |
e96ffe2f | 291 | |
b5dd18d8 | 292 | err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
e96ffe2f TP |
293 | if (err) |
294 | goto err4; | |
295 | ||
296 | return 0; | |
297 | ||
298 | err4: | |
299 | usb_put_hcd(hcd); | |
300 | err3: | |
301 | iounmap(regs); | |
302 | err2: | |
5672b7e6 | 303 | release_mem_region(res->start, resource_size(res)); |
e96ffe2f TP |
304 | err1: |
305 | dev_err(&pdev->dev, "init %s fail, %d\n", | |
7071a3ce | 306 | dev_name(&pdev->dev), err); |
e96ffe2f TP |
307 | |
308 | return err; | |
309 | } | |
310 | ||
311 | static int __exit ehci_orion_drv_remove(struct platform_device *pdev) | |
312 | { | |
313 | struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
8c869eda | 314 | struct clk *clk; |
e96ffe2f TP |
315 | |
316 | usb_remove_hcd(hcd); | |
317 | iounmap(hcd->regs); | |
318 | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | |
319 | usb_put_hcd(hcd); | |
320 | ||
8c869eda AL |
321 | clk = clk_get(&pdev->dev, NULL); |
322 | if (!IS_ERR(clk)) { | |
323 | clk_disable_unprepare(clk); | |
324 | clk_put(clk); | |
325 | } | |
e96ffe2f TP |
326 | return 0; |
327 | } | |
328 | ||
329 | MODULE_ALIAS("platform:orion-ehci"); | |
330 | ||
331 | static struct platform_driver ehci_orion_driver = { | |
332 | .probe = ehci_orion_drv_probe, | |
333 | .remove = __exit_p(ehci_orion_drv_remove), | |
334 | .shutdown = usb_hcd_platform_shutdown, | |
335 | .driver.name = "orion-ehci", | |
336 | }; |