Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
d49d4317 | 2 | * Copyright (C) 2001-2004 by David Brownell |
53bd6a60 | 3 | * |
1da177e4 LT |
4 | * This program is free software; you can redistribute it and/or modify it |
5 | * under the terms of the GNU General Public License as published by the | |
6 | * Free Software Foundation; either version 2 of the License, or (at your | |
7 | * option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, but | |
10 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
11 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 | * for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software Foundation, | |
16 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | ||
19 | /* this file is part of ehci-hcd.c */ | |
20 | ||
21 | /*-------------------------------------------------------------------------*/ | |
22 | ||
23 | /* | |
24 | * EHCI hardware queue manipulation ... the core. QH/QTD manipulation. | |
25 | * | |
26 | * Control, bulk, and interrupt traffic all use "qh" lists. They list "qtd" | |
27 | * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned | |
28 | * buffers needed for the larger number). We use one QH per endpoint, queue | |
29 | * multiple urbs (all three types) per endpoint. URBs may need several qtds. | |
30 | * | |
31 | * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with | |
32 | * interrupts) needs careful scheduling. Performance improvements can be | |
33 | * an ongoing challenge. That's in "ehci-sched.c". | |
53bd6a60 | 34 | * |
1da177e4 LT |
35 | * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs, |
36 | * or otherwise through transaction translators (TTs) in USB 2.0 hubs using | |
37 | * (b) special fields in qh entries or (c) split iso entries. TTs will | |
38 | * buffer low/full speed data so the host collects it at high speed. | |
39 | */ | |
40 | ||
41 | /*-------------------------------------------------------------------------*/ | |
42 | ||
43 | /* fill a qtd, returning how much of the buffer we were able to queue up */ | |
44 | ||
45 | static int | |
6dbd682b SR |
46 | qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf, |
47 | size_t len, int token, int maxpacket) | |
1da177e4 LT |
48 | { |
49 | int i, count; | |
50 | u64 addr = buf; | |
51 | ||
52 | /* one buffer entry per 4K ... first might be short or unaligned */ | |
6dbd682b SR |
53 | qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr); |
54 | qtd->hw_buf_hi[0] = cpu_to_hc32(ehci, (u32)(addr >> 32)); | |
1da177e4 LT |
55 | count = 0x1000 - (buf & 0x0fff); /* rest of that page */ |
56 | if (likely (len < count)) /* ... iff needed */ | |
57 | count = len; | |
58 | else { | |
59 | buf += 0x1000; | |
60 | buf &= ~0x0fff; | |
61 | ||
62 | /* per-qtd limit: from 16K to 20K (best alignment) */ | |
63 | for (i = 1; count < len && i < 5; i++) { | |
64 | addr = buf; | |
6dbd682b SR |
65 | qtd->hw_buf[i] = cpu_to_hc32(ehci, (u32)addr); |
66 | qtd->hw_buf_hi[i] = cpu_to_hc32(ehci, | |
67 | (u32)(addr >> 32)); | |
1da177e4 LT |
68 | buf += 0x1000; |
69 | if ((count + 0x1000) < len) | |
70 | count += 0x1000; | |
71 | else | |
72 | count = len; | |
73 | } | |
74 | ||
75 | /* short packets may only terminate transfers */ | |
76 | if (count != len) | |
77 | count -= (count % maxpacket); | |
78 | } | |
6dbd682b | 79 | qtd->hw_token = cpu_to_hc32(ehci, (count << 16) | token); |
1da177e4 LT |
80 | qtd->length = count; |
81 | ||
82 | return count; | |
83 | } | |
84 | ||
85 | /*-------------------------------------------------------------------------*/ | |
86 | ||
87 | static inline void | |
88 | qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) | |
89 | { | |
3807e26d AD |
90 | struct ehci_qh_hw *hw = qh->hw; |
91 | ||
1da177e4 LT |
92 | /* writes to an active overlay are unsafe */ |
93 | BUG_ON(qh->qh_state != QH_STATE_IDLE); | |
94 | ||
3807e26d AD |
95 | hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); |
96 | hw->hw_alt_next = EHCI_LIST_END(ehci); | |
1da177e4 | 97 | |
a455212d AS |
98 | /* Except for control endpoints, we make hardware maintain data |
99 | * toggle (like OHCI) ... here (re)initialize the toggle in the QH, | |
100 | * and set the pseudo-toggle in udev. Only usb_clear_halt() will | |
101 | * ever clear it. | |
102 | */ | |
4c53de72 | 103 | if (!(hw->hw_info1 & cpu_to_hc32(ehci, QH_TOGGLE_CTL))) { |
a455212d AS |
104 | unsigned is_out, epnum; |
105 | ||
e04f5f7e | 106 | is_out = qh->is_out; |
3807e26d | 107 | epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f; |
a455212d | 108 | if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) { |
3807e26d | 109 | hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); |
a455212d AS |
110 | usb_settoggle (qh->dev, epnum, is_out, 1); |
111 | } | |
112 | } | |
113 | ||
3807e26d | 114 | hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING); |
1da177e4 LT |
115 | } |
116 | ||
117 | /* if it weren't for a common silicon quirk (writing the dummy into the qh | |
118 | * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault | |
119 | * recovery (including urb dequeue) would need software changes to a QH... | |
120 | */ | |
121 | static void | |
122 | qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) | |
123 | { | |
124 | struct ehci_qtd *qtd; | |
125 | ||
126 | if (list_empty (&qh->qtd_list)) | |
127 | qtd = qh->dummy; | |
128 | else { | |
129 | qtd = list_entry (qh->qtd_list.next, | |
130 | struct ehci_qtd, qtd_list); | |
3d037774 PK |
131 | /* |
132 | * first qtd may already be partially processed. | |
133 | * If we come here during unlink, the QH overlay region | |
134 | * might have reference to the just unlinked qtd. The | |
135 | * qtd is updated in qh_completions(). Update the QH | |
136 | * overlay here. | |
137 | */ | |
138 | if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { | |
139 | qh->hw->hw_qtd_next = qtd->hw_next; | |
1da177e4 | 140 | qtd = NULL; |
3d037774 | 141 | } |
1da177e4 LT |
142 | } |
143 | ||
144 | if (qtd) | |
145 | qh_update (ehci, qh, qtd); | |
146 | } | |
147 | ||
148 | /*-------------------------------------------------------------------------*/ | |
149 | ||
914b7012 AS |
150 | static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh); |
151 | ||
152 | static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd, | |
153 | struct usb_host_endpoint *ep) | |
154 | { | |
155 | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
156 | struct ehci_qh *qh = ep->hcpriv; | |
157 | unsigned long flags; | |
158 | ||
159 | spin_lock_irqsave(&ehci->lock, flags); | |
160 | qh->clearing_tt = 0; | |
161 | if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list) | |
e8799906 | 162 | && ehci->rh_state == EHCI_RH_RUNNING) |
914b7012 AS |
163 | qh_link_async(ehci, qh); |
164 | spin_unlock_irqrestore(&ehci->lock, flags); | |
165 | } | |
166 | ||
167 | static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh, | |
168 | struct urb *urb, u32 token) | |
169 | { | |
170 | ||
171 | /* If an async split transaction gets an error or is unlinked, | |
172 | * the TT buffer may be left in an indeterminate state. We | |
173 | * have to clear the TT buffer. | |
174 | * | |
175 | * Note: this routine is never called for Isochronous transfers. | |
176 | */ | |
177 | if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) { | |
178 | #ifdef DEBUG | |
179 | struct usb_device *tt = urb->dev->tt->hub; | |
180 | dev_dbg(&tt->dev, | |
181 | "clear tt buffer port %d, a%d ep%d t%08x\n", | |
182 | urb->dev->ttport, urb->dev->devnum, | |
183 | usb_pipeendpoint(urb->pipe), token); | |
184 | #endif /* DEBUG */ | |
185 | if (!ehci_is_TDI(ehci) | |
186 | || urb->dev->tt->hub != | |
187 | ehci_to_hcd(ehci)->self.root_hub) { | |
188 | if (usb_hub_clear_tt_buffer(urb) == 0) | |
189 | qh->clearing_tt = 1; | |
190 | } else { | |
191 | ||
192 | /* REVISIT ARC-derived cores don't clear the root | |
193 | * hub TT buffer in this way... | |
194 | */ | |
195 | } | |
196 | } | |
197 | } | |
198 | ||
14c04c0f | 199 | static int qtd_copy_status ( |
1da177e4 LT |
200 | struct ehci_hcd *ehci, |
201 | struct urb *urb, | |
202 | size_t length, | |
203 | u32 token | |
204 | ) | |
205 | { | |
14c04c0f AS |
206 | int status = -EINPROGRESS; |
207 | ||
1da177e4 LT |
208 | /* count IN/OUT bytes, not SETUP (even short packets) */ |
209 | if (likely (QTD_PID (token) != 2)) | |
210 | urb->actual_length += length - QTD_LENGTH (token); | |
211 | ||
212 | /* don't modify error codes */ | |
eb231054 | 213 | if (unlikely(urb->unlinked)) |
14c04c0f | 214 | return status; |
1da177e4 LT |
215 | |
216 | /* force cleanup after short read; not always an error */ | |
217 | if (unlikely (IS_SHORT_READ (token))) | |
14c04c0f | 218 | status = -EREMOTEIO; |
1da177e4 LT |
219 | |
220 | /* serious "can't proceed" faults reported by the hardware */ | |
221 | if (token & QTD_STS_HALT) { | |
222 | if (token & QTD_STS_BABBLE) { | |
223 | /* FIXME "must" disable babbling device's port too */ | |
14c04c0f | 224 | status = -EOVERFLOW; |
ba516de3 AS |
225 | /* CERR nonzero + halt --> stall */ |
226 | } else if (QTD_CERR(token)) { | |
227 | status = -EPIPE; | |
228 | ||
229 | /* In theory, more than one of the following bits can be set | |
230 | * since they are sticky and the transaction is retried. | |
231 | * Which to test first is rather arbitrary. | |
232 | */ | |
1da177e4 LT |
233 | } else if (token & QTD_STS_MMF) { |
234 | /* fs/ls interrupt xfer missed the complete-split */ | |
14c04c0f | 235 | status = -EPROTO; |
1da177e4 | 236 | } else if (token & QTD_STS_DBE) { |
14c04c0f | 237 | status = (QTD_PID (token) == 1) /* IN ? */ |
1da177e4 LT |
238 | ? -ENOSR /* hc couldn't read data */ |
239 | : -ECOMM; /* hc couldn't write data */ | |
240 | } else if (token & QTD_STS_XACT) { | |
ba516de3 AS |
241 | /* timeout, bad CRC, wrong PID, etc */ |
242 | ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n", | |
243 | urb->dev->devpath, | |
244 | usb_pipeendpoint(urb->pipe), | |
245 | usb_pipein(urb->pipe) ? "in" : "out"); | |
14c04c0f | 246 | status = -EPROTO; |
ba516de3 AS |
247 | } else { /* unknown */ |
248 | status = -EPROTO; | |
249 | } | |
1da177e4 LT |
250 | |
251 | ehci_vdbg (ehci, | |
252 | "dev%d ep%d%s qtd token %08x --> status %d\n", | |
253 | usb_pipedevice (urb->pipe), | |
254 | usb_pipeendpoint (urb->pipe), | |
255 | usb_pipein (urb->pipe) ? "in" : "out", | |
14c04c0f | 256 | token, status); |
1da177e4 | 257 | } |
14c04c0f AS |
258 | |
259 | return status; | |
1da177e4 LT |
260 | } |
261 | ||
262 | static void | |
14c04c0f | 263 | ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status) |
1da177e4 LT |
264 | __releases(ehci->lock) |
265 | __acquires(ehci->lock) | |
266 | { | |
267 | if (likely (urb->hcpriv != NULL)) { | |
268 | struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv; | |
269 | ||
270 | /* S-mask in a QH means it's an interrupt urb */ | |
3807e26d | 271 | if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) { |
1da177e4 LT |
272 | |
273 | /* ... update hc-wide periodic stats (for usbfs) */ | |
274 | ehci_to_hcd(ehci)->self.bandwidth_int_reqs--; | |
275 | } | |
1da177e4 LT |
276 | } |
277 | ||
eb231054 AS |
278 | if (unlikely(urb->unlinked)) { |
279 | COUNT(ehci->stats.unlink); | |
280 | } else { | |
4f667627 DB |
281 | /* report non-error and short read status as zero */ |
282 | if (status == -EINPROGRESS || status == -EREMOTEIO) | |
14c04c0f | 283 | status = 0; |
eb231054 | 284 | COUNT(ehci->stats.complete); |
1da177e4 | 285 | } |
1da177e4 LT |
286 | |
287 | #ifdef EHCI_URB_TRACE | |
288 | ehci_dbg (ehci, | |
289 | "%s %s urb %p ep%d%s status %d len %d/%d\n", | |
441b62c1 | 290 | __func__, urb->dev->devpath, urb, |
1da177e4 LT |
291 | usb_pipeendpoint (urb->pipe), |
292 | usb_pipein (urb->pipe) ? "in" : "out", | |
14c04c0f | 293 | status, |
1da177e4 LT |
294 | urb->actual_length, urb->transfer_buffer_length); |
295 | #endif | |
296 | ||
297 | /* complete() can reenter this HCD */ | |
e9df41c5 | 298 | usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb); |
1da177e4 | 299 | spin_unlock (&ehci->lock); |
4a00027d | 300 | usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status); |
1da177e4 LT |
301 | spin_lock (&ehci->lock); |
302 | } | |
303 | ||
1da177e4 LT |
304 | static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh); |
305 | ||
306 | /* | |
307 | * Process and free completed qtds for a qh, returning URBs to drivers. | |
308 | * Chases up to qh->hw_current. Returns number of completions called, | |
309 | * indicating how much "real" work we did. | |
310 | */ | |
1da177e4 | 311 | static unsigned |
7d12e780 | 312 | qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) |
1da177e4 | 313 | { |
3a44494e | 314 | struct ehci_qtd *last, *end = qh->dummy; |
1da177e4 | 315 | struct list_head *entry, *tmp; |
3a44494e | 316 | int last_status; |
1da177e4 LT |
317 | int stopped; |
318 | unsigned count = 0; | |
1da177e4 | 319 | u8 state; |
3807e26d | 320 | struct ehci_qh_hw *hw = qh->hw; |
1da177e4 LT |
321 | |
322 | if (unlikely (list_empty (&qh->qtd_list))) | |
323 | return count; | |
324 | ||
325 | /* completions (or tasks on other cpus) must never clobber HALT | |
326 | * till we've gone through and cleaned everything up, even when | |
327 | * they add urbs to this qh's queue or mark them for unlinking. | |
328 | * | |
329 | * NOTE: unlinking expects to be done in queue order. | |
3a44494e AS |
330 | * |
331 | * It's a bug for qh->qh_state to be anything other than | |
332 | * QH_STATE_IDLE, unless our caller is scan_async() or | |
569b394f | 333 | * scan_intr(). |
1da177e4 LT |
334 | */ |
335 | state = qh->qh_state; | |
336 | qh->qh_state = QH_STATE_COMPLETING; | |
337 | stopped = (state == QH_STATE_IDLE); | |
338 | ||
3a44494e AS |
339 | rescan: |
340 | last = NULL; | |
341 | last_status = -EINPROGRESS; | |
342 | qh->needs_rescan = 0; | |
343 | ||
1da177e4 LT |
344 | /* remove de-activated QTDs from front of queue. |
345 | * after faults (including short reads), cleanup this urb | |
346 | * then let the queue advance. | |
347 | * if queue is stopped, handles unlinks. | |
348 | */ | |
349 | list_for_each_safe (entry, tmp, &qh->qtd_list) { | |
350 | struct ehci_qtd *qtd; | |
351 | struct urb *urb; | |
352 | u32 token = 0; | |
353 | ||
354 | qtd = list_entry (entry, struct ehci_qtd, qtd_list); | |
355 | urb = qtd->urb; | |
356 | ||
357 | /* clean up any state from previous QTD ...*/ | |
358 | if (last) { | |
359 | if (likely (last->urb != urb)) { | |
14c04c0f | 360 | ehci_urb_done(ehci, last->urb, last_status); |
1da177e4 | 361 | count++; |
b5f7a0ec | 362 | last_status = -EINPROGRESS; |
1da177e4 LT |
363 | } |
364 | ehci_qtd_free (ehci, last); | |
365 | last = NULL; | |
366 | } | |
367 | ||
368 | /* ignore urbs submitted during completions we reported */ | |
369 | if (qtd == end) | |
370 | break; | |
371 | ||
372 | /* hardware copies qtd out of qh overlay */ | |
373 | rmb (); | |
6dbd682b | 374 | token = hc32_to_cpu(ehci, qtd->hw_token); |
1da177e4 LT |
375 | |
376 | /* always clean up qtds the hc de-activated */ | |
a2c2706e | 377 | retry_xacterr: |
1da177e4 LT |
378 | if ((token & QTD_STS_ACTIVE) == 0) { |
379 | ||
332960bd VP |
380 | /* Report Data Buffer Error: non-fatal but useful */ |
381 | if (token & QTD_STS_DBE) | |
382 | ehci_dbg(ehci, | |
383 | "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n", | |
384 | urb, | |
385 | usb_endpoint_num(&urb->ep->desc), | |
386 | usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out", | |
387 | urb->transfer_buffer_length, | |
388 | qtd, | |
389 | qh); | |
390 | ||
a082b5c7 DB |
391 | /* on STALL, error, and short reads this urb must |
392 | * complete and all its qtds must be recycled. | |
393 | */ | |
1da177e4 | 394 | if ((token & QTD_STS_HALT) != 0) { |
a2c2706e AS |
395 | |
396 | /* retry transaction errors until we | |
397 | * reach the software xacterr limit | |
398 | */ | |
399 | if ((token & QTD_STS_XACT) && | |
400 | QTD_CERR(token) == 0 && | |
ef4638f9 | 401 | ++qh->xacterrs < QH_XACTERR_MAX && |
a2c2706e AS |
402 | !urb->unlinked) { |
403 | ehci_dbg(ehci, | |
d0626808 | 404 | "detected XactErr len %zu/%zu retry %d\n", |
ef4638f9 | 405 | qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs); |
a2c2706e AS |
406 | |
407 | /* reset the token in the qtd and the | |
408 | * qh overlay (which still contains | |
409 | * the qtd) so that we pick up from | |
410 | * where we left off | |
411 | */ | |
412 | token &= ~QTD_STS_HALT; | |
413 | token |= QTD_STS_ACTIVE | | |
414 | (EHCI_TUNE_CERR << 10); | |
415 | qtd->hw_token = cpu_to_hc32(ehci, | |
416 | token); | |
417 | wmb(); | |
3807e26d AD |
418 | hw->hw_token = cpu_to_hc32(ehci, |
419 | token); | |
a2c2706e AS |
420 | goto retry_xacterr; |
421 | } | |
1da177e4 LT |
422 | stopped = 1; |
423 | ||
424 | /* magic dummy for some short reads; qh won't advance. | |
425 | * that silicon quirk can kick in with this dummy too. | |
a082b5c7 DB |
426 | * |
427 | * other short reads won't stop the queue, including | |
428 | * control transfers (status stage handles that) or | |
429 | * most other single-qtd reads ... the queue stops if | |
430 | * URB_SHORT_NOT_OK was set so the driver submitting | |
431 | * the urbs could clean it up. | |
1da177e4 LT |
432 | */ |
433 | } else if (IS_SHORT_READ (token) | |
6dbd682b SR |
434 | && !(qtd->hw_alt_next |
435 | & EHCI_LIST_END(ehci))) { | |
1da177e4 | 436 | stopped = 1; |
1da177e4 LT |
437 | } |
438 | ||
439 | /* stop scanning when we reach qtds the hc is using */ | |
440 | } else if (likely (!stopped | |
c0c53dbc | 441 | && ehci->rh_state >= EHCI_RH_RUNNING)) { |
1da177e4 LT |
442 | break; |
443 | ||
a082b5c7 | 444 | /* scan the whole queue for unlinks whenever it stops */ |
1da177e4 LT |
445 | } else { |
446 | stopped = 1; | |
447 | ||
a082b5c7 | 448 | /* cancel everything if we halt, suspend, etc */ |
c0c53dbc | 449 | if (ehci->rh_state < EHCI_RH_RUNNING) |
14c04c0f | 450 | last_status = -ESHUTDOWN; |
1da177e4 | 451 | |
a082b5c7 DB |
452 | /* this qtd is active; skip it unless a previous qtd |
453 | * for its urb faulted, or its urb was canceled. | |
1da177e4 | 454 | */ |
a082b5c7 | 455 | else if (last_status == -EINPROGRESS && !urb->unlinked) |
1da177e4 | 456 | continue; |
53bd6a60 | 457 | |
a082b5c7 | 458 | /* qh unlinked; token in overlay may be most current */ |
1da177e4 | 459 | if (state == QH_STATE_IDLE |
6dbd682b | 460 | && cpu_to_hc32(ehci, qtd->qtd_dma) |
3807e26d AD |
461 | == hw->hw_current) { |
462 | token = hc32_to_cpu(ehci, hw->hw_token); | |
1da177e4 | 463 | |
914b7012 AS |
464 | /* An unlink may leave an incomplete |
465 | * async transaction in the TT buffer. | |
466 | * We have to clear it. | |
467 | */ | |
468 | ehci_clear_tt_buffer(ehci, qh, urb, token); | |
469 | } | |
1da177e4 | 470 | } |
53bd6a60 | 471 | |
4f667627 DB |
472 | /* unless we already know the urb's status, collect qtd status |
473 | * and update count of bytes transferred. in common short read | |
474 | * cases with only one data qtd (including control transfers), | |
475 | * queue processing won't halt. but with two or more qtds (for | |
476 | * example, with a 32 KB transfer), when the first qtd gets a | |
477 | * short read the second must be removed by hand. | |
478 | */ | |
479 | if (last_status == -EINPROGRESS) { | |
480 | last_status = qtd_copy_status(ehci, urb, | |
481 | qtd->length, token); | |
482 | if (last_status == -EREMOTEIO | |
483 | && (qtd->hw_alt_next | |
484 | & EHCI_LIST_END(ehci))) | |
485 | last_status = -EINPROGRESS; | |
914b7012 AS |
486 | |
487 | /* As part of low/full-speed endpoint-halt processing | |
488 | * we must clear the TT buffer (11.17.5). | |
489 | */ | |
490 | if (unlikely(last_status != -EINPROGRESS && | |
c2f6595f AS |
491 | last_status != -EREMOTEIO)) { |
492 | /* The TT's in some hubs malfunction when they | |
493 | * receive this request following a STALL (they | |
494 | * stop sending isochronous packets). Since a | |
495 | * STALL can't leave the TT buffer in a busy | |
496 | * state (if you believe Figures 11-48 - 11-51 | |
497 | * in the USB 2.0 spec), we won't clear the TT | |
498 | * buffer in this case. Strictly speaking this | |
499 | * is a violation of the spec. | |
500 | */ | |
501 | if (last_status != -EPIPE) | |
502 | ehci_clear_tt_buffer(ehci, qh, urb, | |
503 | token); | |
504 | } | |
b0d9efba | 505 | } |
1da177e4 | 506 | |
a082b5c7 DB |
507 | /* if we're removing something not at the queue head, |
508 | * patch the hardware queue pointer. | |
509 | */ | |
1da177e4 LT |
510 | if (stopped && qtd->qtd_list.prev != &qh->qtd_list) { |
511 | last = list_entry (qtd->qtd_list.prev, | |
512 | struct ehci_qtd, qtd_list); | |
513 | last->hw_next = qtd->hw_next; | |
514 | } | |
a082b5c7 DB |
515 | |
516 | /* remove qtd; it's recycled after possible urb completion */ | |
1da177e4 LT |
517 | list_del (&qtd->qtd_list); |
518 | last = qtd; | |
a2c2706e AS |
519 | |
520 | /* reinit the xacterr counter for the next qtd */ | |
ef4638f9 | 521 | qh->xacterrs = 0; |
1da177e4 LT |
522 | } |
523 | ||
524 | /* last urb's completion might still need calling */ | |
525 | if (likely (last != NULL)) { | |
14c04c0f | 526 | ehci_urb_done(ehci, last->urb, last_status); |
1da177e4 LT |
527 | count++; |
528 | ehci_qtd_free (ehci, last); | |
529 | } | |
530 | ||
3a44494e AS |
531 | /* Do we need to rescan for URBs dequeued during a giveback? */ |
532 | if (unlikely(qh->needs_rescan)) { | |
533 | /* If the QH is already unlinked, do the rescan now. */ | |
534 | if (state == QH_STATE_IDLE) | |
535 | goto rescan; | |
536 | ||
537 | /* Otherwise we have to wait until the QH is fully unlinked. | |
538 | * Our caller will start an unlink if qh->needs_rescan is | |
539 | * set. But if an unlink has already started, nothing needs | |
540 | * to be done. | |
541 | */ | |
542 | if (state != QH_STATE_LINKED) | |
543 | qh->needs_rescan = 0; | |
544 | } | |
545 | ||
1da177e4 LT |
546 | /* restore original state; caller must unlink or relink */ |
547 | qh->qh_state = state; | |
548 | ||
549 | /* be sure the hardware's done with the qh before refreshing | |
550 | * it after fault cleanup, or recovering from silicon wrongly | |
551 | * overlaying the dummy qtd (which reduces DMA chatter). | |
552 | */ | |
3807e26d | 553 | if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) { |
1da177e4 LT |
554 | switch (state) { |
555 | case QH_STATE_IDLE: | |
556 | qh_refresh(ehci, qh); | |
557 | break; | |
558 | case QH_STATE_LINKED: | |
a082b5c7 DB |
559 | /* We won't refresh a QH that's linked (after the HC |
560 | * stopped the queue). That avoids a race: | |
561 | * - HC reads first part of QH; | |
562 | * - CPU updates that first part and the token; | |
563 | * - HC reads rest of that QH, including token | |
564 | * Result: HC gets an inconsistent image, and then | |
565 | * DMAs to/from the wrong memory (corrupting it). | |
566 | * | |
567 | * That should be rare for interrupt transfers, | |
1da177e4 LT |
568 | * except maybe high bandwidth ... |
569 | */ | |
a448c9d8 AS |
570 | |
571 | /* Tell the caller to start an unlink */ | |
572 | qh->needs_rescan = 1; | |
1da177e4 LT |
573 | break; |
574 | /* otherwise, unlink already started */ | |
575 | } | |
576 | } | |
577 | ||
578 | return count; | |
579 | } | |
580 | ||
581 | /*-------------------------------------------------------------------------*/ | |
582 | ||
583 | // high bandwidth multiplier, as encoded in highspeed endpoint descriptors | |
584 | #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) | |
585 | // ... and packet size, for any kind of endpoint descriptor | |
586 | #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) | |
587 | ||
588 | /* | |
589 | * reverse of qh_urb_transaction: free a list of TDs. | |
590 | * used for cleanup after errors, before HC sees an URB's TDs. | |
591 | */ | |
592 | static void qtd_list_free ( | |
593 | struct ehci_hcd *ehci, | |
594 | struct urb *urb, | |
595 | struct list_head *qtd_list | |
596 | ) { | |
597 | struct list_head *entry, *temp; | |
598 | ||
599 | list_for_each_safe (entry, temp, qtd_list) { | |
600 | struct ehci_qtd *qtd; | |
601 | ||
602 | qtd = list_entry (entry, struct ehci_qtd, qtd_list); | |
603 | list_del (&qtd->qtd_list); | |
604 | ehci_qtd_free (ehci, qtd); | |
605 | } | |
606 | } | |
607 | ||
608 | /* | |
609 | * create a list of filled qtds for this URB; won't link into qh. | |
610 | */ | |
611 | static struct list_head * | |
612 | qh_urb_transaction ( | |
613 | struct ehci_hcd *ehci, | |
614 | struct urb *urb, | |
615 | struct list_head *head, | |
55016f10 | 616 | gfp_t flags |
1da177e4 LT |
617 | ) { |
618 | struct ehci_qtd *qtd, *qtd_prev; | |
619 | dma_addr_t buf; | |
40f8db8f | 620 | int len, this_sg_len, maxpacket; |
1da177e4 LT |
621 | int is_input; |
622 | u32 token; | |
40f8db8f AS |
623 | int i; |
624 | struct scatterlist *sg; | |
1da177e4 LT |
625 | |
626 | /* | |
627 | * URBs map to sequences of QTDs: one logical transaction | |
628 | */ | |
629 | qtd = ehci_qtd_alloc (ehci, flags); | |
630 | if (unlikely (!qtd)) | |
631 | return NULL; | |
632 | list_add_tail (&qtd->qtd_list, head); | |
633 | qtd->urb = urb; | |
634 | ||
635 | token = QTD_STS_ACTIVE; | |
636 | token |= (EHCI_TUNE_CERR << 10); | |
637 | /* for split transactions, SplitXState initialized to zero */ | |
638 | ||
639 | len = urb->transfer_buffer_length; | |
640 | is_input = usb_pipein (urb->pipe); | |
641 | if (usb_pipecontrol (urb->pipe)) { | |
642 | /* SETUP pid */ | |
6dbd682b SR |
643 | qtd_fill(ehci, qtd, urb->setup_dma, |
644 | sizeof (struct usb_ctrlrequest), | |
645 | token | (2 /* "setup" */ << 8), 8); | |
1da177e4 LT |
646 | |
647 | /* ... and always at least one more pid */ | |
648 | token ^= QTD_TOGGLE; | |
649 | qtd_prev = qtd; | |
650 | qtd = ehci_qtd_alloc (ehci, flags); | |
651 | if (unlikely (!qtd)) | |
652 | goto cleanup; | |
653 | qtd->urb = urb; | |
6dbd682b | 654 | qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma); |
1da177e4 | 655 | list_add_tail (&qtd->qtd_list, head); |
6912354a AS |
656 | |
657 | /* for zero length DATA stages, STATUS is always IN */ | |
658 | if (len == 0) | |
659 | token |= (1 /* "in" */ << 8); | |
53bd6a60 | 660 | } |
1da177e4 LT |
661 | |
662 | /* | |
663 | * data transfer stage: buffer setup | |
664 | */ | |
bc677d5b | 665 | i = urb->num_mapped_sgs; |
40f8db8f | 666 | if (len > 0 && i > 0) { |
910f8d0c | 667 | sg = urb->sg; |
40f8db8f AS |
668 | buf = sg_dma_address(sg); |
669 | ||
670 | /* urb->transfer_buffer_length may be smaller than the | |
671 | * size of the scatterlist (or vice versa) | |
672 | */ | |
673 | this_sg_len = min_t(int, sg_dma_len(sg), len); | |
674 | } else { | |
675 | sg = NULL; | |
676 | buf = urb->transfer_dma; | |
677 | this_sg_len = len; | |
678 | } | |
1da177e4 | 679 | |
6912354a | 680 | if (is_input) |
1da177e4 LT |
681 | token |= (1 /* "in" */ << 8); |
682 | /* else it's already initted to "out" pid (0 << 8) */ | |
683 | ||
684 | maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input)); | |
685 | ||
686 | /* | |
687 | * buffer gets wrapped in one or more qtds; | |
688 | * last one may be "short" (including zero len) | |
689 | * and may serve as a control status ack | |
690 | */ | |
691 | for (;;) { | |
692 | int this_qtd_len; | |
693 | ||
40f8db8f AS |
694 | this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token, |
695 | maxpacket); | |
696 | this_sg_len -= this_qtd_len; | |
1da177e4 LT |
697 | len -= this_qtd_len; |
698 | buf += this_qtd_len; | |
a082b5c7 DB |
699 | |
700 | /* | |
701 | * short reads advance to a "magic" dummy instead of the next | |
702 | * qtd ... that forces the queue to stop, for manual cleanup. | |
703 | * (this will usually be overridden later.) | |
704 | */ | |
1da177e4 | 705 | if (is_input) |
3807e26d | 706 | qtd->hw_alt_next = ehci->async->hw->hw_alt_next; |
1da177e4 LT |
707 | |
708 | /* qh makes control packets use qtd toggle; maybe switch it */ | |
709 | if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0) | |
710 | token ^= QTD_TOGGLE; | |
711 | ||
40f8db8f AS |
712 | if (likely(this_sg_len <= 0)) { |
713 | if (--i <= 0 || len <= 0) | |
714 | break; | |
715 | sg = sg_next(sg); | |
716 | buf = sg_dma_address(sg); | |
717 | this_sg_len = min_t(int, sg_dma_len(sg), len); | |
718 | } | |
1da177e4 LT |
719 | |
720 | qtd_prev = qtd; | |
721 | qtd = ehci_qtd_alloc (ehci, flags); | |
722 | if (unlikely (!qtd)) | |
723 | goto cleanup; | |
724 | qtd->urb = urb; | |
6dbd682b | 725 | qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma); |
1da177e4 LT |
726 | list_add_tail (&qtd->qtd_list, head); |
727 | } | |
728 | ||
a082b5c7 DB |
729 | /* |
730 | * unless the caller requires manual cleanup after short reads, | |
731 | * have the alt_next mechanism keep the queue running after the | |
732 | * last data qtd (the only one, for control and most other cases). | |
1da177e4 LT |
733 | */ |
734 | if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0 | |
735 | || usb_pipecontrol (urb->pipe))) | |
6dbd682b | 736 | qtd->hw_alt_next = EHCI_LIST_END(ehci); |
1da177e4 LT |
737 | |
738 | /* | |
739 | * control requests may need a terminating data "status" ack; | |
9a971dda ML |
740 | * other OUT ones may need a terminating short packet |
741 | * (zero length). | |
1da177e4 | 742 | */ |
6912354a | 743 | if (likely (urb->transfer_buffer_length != 0)) { |
1da177e4 LT |
744 | int one_more = 0; |
745 | ||
746 | if (usb_pipecontrol (urb->pipe)) { | |
747 | one_more = 1; | |
748 | token ^= 0x0100; /* "in" <--> "out" */ | |
749 | token |= QTD_TOGGLE; /* force DATA1 */ | |
9a971dda | 750 | } else if (usb_pipeout(urb->pipe) |
1da177e4 LT |
751 | && (urb->transfer_flags & URB_ZERO_PACKET) |
752 | && !(urb->transfer_buffer_length % maxpacket)) { | |
753 | one_more = 1; | |
754 | } | |
755 | if (one_more) { | |
756 | qtd_prev = qtd; | |
757 | qtd = ehci_qtd_alloc (ehci, flags); | |
758 | if (unlikely (!qtd)) | |
759 | goto cleanup; | |
760 | qtd->urb = urb; | |
6dbd682b | 761 | qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma); |
1da177e4 LT |
762 | list_add_tail (&qtd->qtd_list, head); |
763 | ||
764 | /* never any data in such packets */ | |
6dbd682b | 765 | qtd_fill(ehci, qtd, 0, 0, token, 0); |
1da177e4 LT |
766 | } |
767 | } | |
768 | ||
769 | /* by default, enable interrupt on urb completion */ | |
770 | if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT))) | |
6dbd682b | 771 | qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC); |
1da177e4 LT |
772 | return head; |
773 | ||
774 | cleanup: | |
775 | qtd_list_free (ehci, urb, head); | |
776 | return NULL; | |
777 | } | |
778 | ||
779 | /*-------------------------------------------------------------------------*/ | |
780 | ||
781 | // Would be best to create all qh's from config descriptors, | |
782 | // when each interface/altsetting is established. Unlink | |
783 | // any previous qh and cancel its urbs first; endpoints are | |
784 | // implicitly reset then (data toggle too). | |
785 | // That'd mean updating how usbcore talks to HCDs. (2.7?) | |
786 | ||
787 | ||
788 | /* | |
789 | * Each QH holds a qtd list; a QH is used for everything except iso. | |
790 | * | |
791 | * For interrupt urbs, the scheduler must set the microframe scheduling | |
792 | * mask(s) each time the QH gets scheduled. For highspeed, that's | |
793 | * just one microframe in the s-mask. For split interrupt transactions | |
794 | * there are additional complications: c-mask, maybe FSTNs. | |
795 | */ | |
796 | static struct ehci_qh * | |
797 | qh_make ( | |
798 | struct ehci_hcd *ehci, | |
799 | struct urb *urb, | |
55016f10 | 800 | gfp_t flags |
1da177e4 LT |
801 | ) { |
802 | struct ehci_qh *qh = ehci_qh_alloc (ehci, flags); | |
803 | u32 info1 = 0, info2 = 0; | |
804 | int is_input, type; | |
805 | int maxp = 0; | |
340ba5f9 | 806 | struct usb_tt *tt = urb->dev->tt; |
3807e26d | 807 | struct ehci_qh_hw *hw; |
1da177e4 LT |
808 | |
809 | if (!qh) | |
810 | return qh; | |
811 | ||
812 | /* | |
813 | * init endpoint/device data for this QH | |
814 | */ | |
815 | info1 |= usb_pipeendpoint (urb->pipe) << 8; | |
816 | info1 |= usb_pipedevice (urb->pipe) << 0; | |
817 | ||
818 | is_input = usb_pipein (urb->pipe); | |
819 | type = usb_pipetype (urb->pipe); | |
820 | maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input); | |
821 | ||
caa9ef67 DB |
822 | /* 1024 byte maxpacket is a hardware ceiling. High bandwidth |
823 | * acts like up to 3KB, but is built from smaller packets. | |
824 | */ | |
825 | if (max_packet(maxp) > 1024) { | |
826 | ehci_dbg(ehci, "bogus qh maxpacket %d\n", max_packet(maxp)); | |
827 | goto done; | |
828 | } | |
829 | ||
1da177e4 LT |
830 | /* Compute interrupt scheduling parameters just once, and save. |
831 | * - allowing for high bandwidth, how many nsec/uframe are used? | |
832 | * - split transactions need a second CSPLIT uframe; same question | |
833 | * - splits also need a schedule gap (for full/low speed I/O) | |
834 | * - qh has a polling interval | |
835 | * | |
836 | * For control/bulk requests, the HC or TT handles these. | |
837 | */ | |
838 | if (type == PIPE_INTERRUPT) { | |
340ba5f9 DB |
839 | qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH, |
840 | is_input, 0, | |
841 | hb_mult(maxp) * max_packet(maxp))); | |
1da177e4 LT |
842 | qh->start = NO_FRAME; |
843 | ||
844 | if (urb->dev->speed == USB_SPEED_HIGH) { | |
845 | qh->c_usecs = 0; | |
846 | qh->gap_uf = 0; | |
847 | ||
848 | qh->period = urb->interval >> 3; | |
849 | if (qh->period == 0 && urb->interval != 1) { | |
850 | /* NOTE interval 2 or 4 uframes could work. | |
851 | * But interval 1 scheduling is simpler, and | |
852 | * includes high bandwidth. | |
853 | */ | |
1b9a38bf AS |
854 | urb->interval = 1; |
855 | } else if (qh->period > ehci->periodic_size) { | |
856 | qh->period = ehci->periodic_size; | |
857 | urb->interval = qh->period << 3; | |
1da177e4 LT |
858 | } |
859 | } else { | |
d0384200 | 860 | int think_time; |
861 | ||
1da177e4 LT |
862 | /* gap is f(FS/LS transfer times) */ |
863 | qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed, | |
864 | is_input, 0, maxp) / (125 * 1000); | |
865 | ||
866 | /* FIXME this just approximates SPLIT/CSPLIT times */ | |
867 | if (is_input) { // SPLIT, gap, CSPLIT+DATA | |
868 | qh->c_usecs = qh->usecs + HS_USECS (0); | |
869 | qh->usecs = HS_USECS (1); | |
870 | } else { // SPLIT+DATA, gap, CSPLIT | |
871 | qh->usecs += HS_USECS (1); | |
872 | qh->c_usecs = HS_USECS (0); | |
873 | } | |
874 | ||
d0384200 | 875 | think_time = tt ? tt->think_time : 0; |
876 | qh->tt_usecs = NS_TO_US (think_time + | |
877 | usb_calc_bus_time (urb->dev->speed, | |
878 | is_input, 0, max_packet (maxp))); | |
1da177e4 | 879 | qh->period = urb->interval; |
1b9a38bf AS |
880 | if (qh->period > ehci->periodic_size) { |
881 | qh->period = ehci->periodic_size; | |
882 | urb->interval = qh->period; | |
883 | } | |
1da177e4 LT |
884 | } |
885 | } | |
886 | ||
887 | /* support for tt scheduling, and access to toggles */ | |
6a8e87b2 | 888 | qh->dev = urb->dev; |
1da177e4 LT |
889 | |
890 | /* using TT? */ | |
891 | switch (urb->dev->speed) { | |
892 | case USB_SPEED_LOW: | |
4c53de72 | 893 | info1 |= QH_LOW_SPEED; |
1da177e4 LT |
894 | /* FALL THROUGH */ |
895 | ||
896 | case USB_SPEED_FULL: | |
897 | /* EPS 0 means "full" */ | |
898 | if (type != PIPE_INTERRUPT) | |
899 | info1 |= (EHCI_TUNE_RL_TT << 28); | |
900 | if (type == PIPE_CONTROL) { | |
4c53de72 AS |
901 | info1 |= QH_CONTROL_EP; /* for TT */ |
902 | info1 |= QH_TOGGLE_CTL; /* toggle from qtd */ | |
1da177e4 LT |
903 | } |
904 | info1 |= maxp << 16; | |
905 | ||
906 | info2 |= (EHCI_TUNE_MULT_TT << 30); | |
8cd42e97 KG |
907 | |
908 | /* Some Freescale processors have an erratum in which the | |
909 | * port number in the queue head was 0..N-1 instead of 1..N. | |
910 | */ | |
911 | if (ehci_has_fsl_portno_bug(ehci)) | |
912 | info2 |= (urb->dev->ttport-1) << 23; | |
913 | else | |
914 | info2 |= urb->dev->ttport << 23; | |
1da177e4 LT |
915 | |
916 | /* set the address of the TT; for TDI's integrated | |
917 | * root hub tt, leave it zeroed. | |
918 | */ | |
340ba5f9 DB |
919 | if (tt && tt->hub != ehci_to_hcd(ehci)->self.root_hub) |
920 | info2 |= tt->hub->devnum << 16; | |
1da177e4 LT |
921 | |
922 | /* NOTE: if (PIPE_INTERRUPT) { scheduler sets c-mask } */ | |
923 | ||
924 | break; | |
925 | ||
926 | case USB_SPEED_HIGH: /* no TT involved */ | |
4c53de72 | 927 | info1 |= QH_HIGH_SPEED; |
1da177e4 LT |
928 | if (type == PIPE_CONTROL) { |
929 | info1 |= (EHCI_TUNE_RL_HS << 28); | |
930 | info1 |= 64 << 16; /* usb2 fixed maxpacket */ | |
4c53de72 | 931 | info1 |= QH_TOGGLE_CTL; /* toggle from qtd */ |
1da177e4 LT |
932 | info2 |= (EHCI_TUNE_MULT_HS << 30); |
933 | } else if (type == PIPE_BULK) { | |
934 | info1 |= (EHCI_TUNE_RL_HS << 28); | |
caa9ef67 DB |
935 | /* The USB spec says that high speed bulk endpoints |
936 | * always use 512 byte maxpacket. But some device | |
937 | * vendors decided to ignore that, and MSFT is happy | |
938 | * to help them do so. So now people expect to use | |
939 | * such nonconformant devices with Linux too; sigh. | |
940 | */ | |
941 | info1 |= max_packet(maxp) << 16; | |
1da177e4 LT |
942 | info2 |= (EHCI_TUNE_MULT_HS << 30); |
943 | } else { /* PIPE_INTERRUPT */ | |
944 | info1 |= max_packet (maxp) << 16; | |
945 | info2 |= hb_mult (maxp) << 30; | |
946 | } | |
947 | break; | |
948 | default: | |
82491c2a GKH |
949 | ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev, |
950 | urb->dev->speed); | |
1da177e4 | 951 | done: |
c83e1a9f | 952 | qh_destroy(ehci, qh); |
1da177e4 LT |
953 | return NULL; |
954 | } | |
955 | ||
956 | /* NOTE: if (PIPE_INTERRUPT) { scheduler sets s-mask } */ | |
957 | ||
958 | /* init as live, toggle clear, advance to dummy */ | |
959 | qh->qh_state = QH_STATE_IDLE; | |
3807e26d AD |
960 | hw = qh->hw; |
961 | hw->hw_info1 = cpu_to_hc32(ehci, info1); | |
962 | hw->hw_info2 = cpu_to_hc32(ehci, info2); | |
e04f5f7e | 963 | qh->is_out = !is_input; |
a455212d | 964 | usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1); |
1da177e4 LT |
965 | qh_refresh (ehci, qh); |
966 | return qh; | |
967 | } | |
968 | ||
969 | /*-------------------------------------------------------------------------*/ | |
970 | ||
31446610 AS |
971 | static void enable_async(struct ehci_hcd *ehci) |
972 | { | |
973 | if (ehci->async_count++) | |
974 | return; | |
975 | ||
976 | /* Stop waiting to turn off the async schedule */ | |
977 | ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_DISABLE_ASYNC); | |
978 | ||
979 | /* Don't start the schedule until ASS is 0 */ | |
980 | ehci_poll_ASS(ehci); | |
18aafe64 | 981 | turn_on_io_watchdog(ehci); |
31446610 AS |
982 | } |
983 | ||
984 | static void disable_async(struct ehci_hcd *ehci) | |
985 | { | |
986 | if (--ehci->async_count) | |
987 | return; | |
988 | ||
989 | /* The async schedule and async_unlink list are supposed to be empty */ | |
990 | WARN_ON(ehci->async->qh_next.qh || ehci->async_unlink); | |
991 | ||
992 | /* Don't turn off the schedule until ASS is 1 */ | |
993 | ehci_poll_ASS(ehci); | |
994 | } | |
995 | ||
1da177e4 LT |
996 | /* move qh (and its qtds) onto async queue; maybe enable queue. */ |
997 | ||
998 | static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) | |
999 | { | |
6dbd682b | 1000 | __hc32 dma = QH_NEXT(ehci, qh->qh_dma); |
1da177e4 LT |
1001 | struct ehci_qh *head; |
1002 | ||
914b7012 AS |
1003 | /* Don't link a QH if there's a Clear-TT-Buffer pending */ |
1004 | if (unlikely(qh->clearing_tt)) | |
1005 | return; | |
1006 | ||
3a44494e AS |
1007 | WARN_ON(qh->qh_state != QH_STATE_IDLE); |
1008 | ||
a455212d | 1009 | /* clear halt and/or toggle; and maybe recover from silicon quirk */ |
3a44494e | 1010 | qh_refresh(ehci, qh); |
1da177e4 LT |
1011 | |
1012 | /* splice right after start */ | |
31446610 | 1013 | head = ehci->async; |
1da177e4 | 1014 | qh->qh_next = head->qh_next; |
3807e26d | 1015 | qh->hw->hw_next = head->hw->hw_next; |
1da177e4 LT |
1016 | wmb (); |
1017 | ||
1018 | head->qh_next.qh = qh; | |
3807e26d | 1019 | head->hw->hw_next = dma; |
1da177e4 | 1020 | |
ef4638f9 | 1021 | qh->xacterrs = 0; |
1da177e4 LT |
1022 | qh->qh_state = QH_STATE_LINKED; |
1023 | /* qtd completions reported later by interrupt */ | |
31446610 AS |
1024 | |
1025 | enable_async(ehci); | |
1da177e4 LT |
1026 | } |
1027 | ||
1028 | /*-------------------------------------------------------------------------*/ | |
1029 | ||
1da177e4 LT |
1030 | /* |
1031 | * For control/bulk/interrupt, return QH with these TDs appended. | |
1032 | * Allocates and initializes the QH if necessary. | |
1033 | * Returns null if it can't allocate a QH it needs to. | |
1034 | * If the QH has TDs (urbs) already, that's great. | |
1035 | */ | |
1036 | static struct ehci_qh *qh_append_tds ( | |
1037 | struct ehci_hcd *ehci, | |
1038 | struct urb *urb, | |
1039 | struct list_head *qtd_list, | |
1040 | int epnum, | |
1041 | void **ptr | |
1042 | ) | |
1043 | { | |
1044 | struct ehci_qh *qh = NULL; | |
fd05e720 | 1045 | __hc32 qh_addr_mask = cpu_to_hc32(ehci, 0x7f); |
1da177e4 LT |
1046 | |
1047 | qh = (struct ehci_qh *) *ptr; | |
1048 | if (unlikely (qh == NULL)) { | |
1049 | /* can't sleep here, we have ehci->lock... */ | |
1050 | qh = qh_make (ehci, urb, GFP_ATOMIC); | |
1051 | *ptr = qh; | |
1052 | } | |
1053 | if (likely (qh != NULL)) { | |
1054 | struct ehci_qtd *qtd; | |
1055 | ||
1056 | if (unlikely (list_empty (qtd_list))) | |
1057 | qtd = NULL; | |
1058 | else | |
1059 | qtd = list_entry (qtd_list->next, struct ehci_qtd, | |
1060 | qtd_list); | |
1061 | ||
1062 | /* control qh may need patching ... */ | |
1063 | if (unlikely (epnum == 0)) { | |
1064 | ||
1065 | /* usb_reset_device() briefly reverts to address 0 */ | |
1066 | if (usb_pipedevice (urb->pipe) == 0) | |
3807e26d | 1067 | qh->hw->hw_info1 &= ~qh_addr_mask; |
1da177e4 LT |
1068 | } |
1069 | ||
1070 | /* just one way to queue requests: swap with the dummy qtd. | |
1071 | * only hc or qh_refresh() ever modify the overlay. | |
1072 | */ | |
1073 | if (likely (qtd != NULL)) { | |
1074 | struct ehci_qtd *dummy; | |
1075 | dma_addr_t dma; | |
6dbd682b | 1076 | __hc32 token; |
1da177e4 LT |
1077 | |
1078 | /* to avoid racing the HC, use the dummy td instead of | |
1079 | * the first td of our list (becomes new dummy). both | |
1080 | * tds stay deactivated until we're done, when the | |
1081 | * HC is allowed to fetch the old dummy (4.10.2). | |
1082 | */ | |
1083 | token = qtd->hw_token; | |
6dbd682b | 1084 | qtd->hw_token = HALT_BIT(ehci); |
41f05ded | 1085 | |
1da177e4 LT |
1086 | dummy = qh->dummy; |
1087 | ||
1088 | dma = dummy->qtd_dma; | |
1089 | *dummy = *qtd; | |
1090 | dummy->qtd_dma = dma; | |
1091 | ||
1092 | list_del (&qtd->qtd_list); | |
1093 | list_add (&dummy->qtd_list, qtd_list); | |
7d283aee | 1094 | list_splice_tail(qtd_list, &qh->qtd_list); |
1da177e4 | 1095 | |
6dbd682b | 1096 | ehci_qtd_init(ehci, qtd, qtd->qtd_dma); |
1da177e4 LT |
1097 | qh->dummy = qtd; |
1098 | ||
1099 | /* hc must see the new dummy at list end */ | |
1100 | dma = qtd->qtd_dma; | |
1101 | qtd = list_entry (qh->qtd_list.prev, | |
1102 | struct ehci_qtd, qtd_list); | |
6dbd682b | 1103 | qtd->hw_next = QTD_NEXT(ehci, dma); |
1da177e4 LT |
1104 | |
1105 | /* let the hc process these next qtds */ | |
1106 | wmb (); | |
1107 | dummy->hw_token = token; | |
1108 | ||
c83e1a9f | 1109 | urb->hcpriv = qh; |
1da177e4 LT |
1110 | } |
1111 | } | |
1112 | return qh; | |
1113 | } | |
1114 | ||
1115 | /*-------------------------------------------------------------------------*/ | |
1116 | ||
1117 | static int | |
1118 | submit_async ( | |
1119 | struct ehci_hcd *ehci, | |
1da177e4 LT |
1120 | struct urb *urb, |
1121 | struct list_head *qtd_list, | |
55016f10 | 1122 | gfp_t mem_flags |
1da177e4 | 1123 | ) { |
1da177e4 LT |
1124 | int epnum; |
1125 | unsigned long flags; | |
1126 | struct ehci_qh *qh = NULL; | |
e9df41c5 | 1127 | int rc; |
1da177e4 | 1128 | |
e9df41c5 | 1129 | epnum = urb->ep->desc.bEndpointAddress; |
1da177e4 LT |
1130 | |
1131 | #ifdef EHCI_URB_TRACE | |
eb34a908 DD |
1132 | { |
1133 | struct ehci_qtd *qtd; | |
1134 | qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list); | |
1135 | ehci_dbg(ehci, | |
1136 | "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", | |
1137 | __func__, urb->dev->devpath, urb, | |
1138 | epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", | |
1139 | urb->transfer_buffer_length, | |
1140 | qtd, urb->ep->hcpriv); | |
1141 | } | |
1da177e4 LT |
1142 | #endif |
1143 | ||
1144 | spin_lock_irqsave (&ehci->lock, flags); | |
541c7d43 | 1145 | if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { |
8de98402 BH |
1146 | rc = -ESHUTDOWN; |
1147 | goto done; | |
1148 | } | |
e9df41c5 AS |
1149 | rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb); |
1150 | if (unlikely(rc)) | |
1151 | goto done; | |
8de98402 | 1152 | |
e9df41c5 | 1153 | qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv); |
8de98402 | 1154 | if (unlikely(qh == NULL)) { |
e9df41c5 | 1155 | usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb); |
8de98402 BH |
1156 | rc = -ENOMEM; |
1157 | goto done; | |
1158 | } | |
1da177e4 LT |
1159 | |
1160 | /* Control/bulk operations through TTs don't need scheduling, | |
1161 | * the HC and TT handle it when the TT has a buffer ready. | |
1162 | */ | |
8de98402 | 1163 | if (likely (qh->qh_state == QH_STATE_IDLE)) |
7a0f0d95 | 1164 | qh_link_async(ehci, qh); |
8de98402 | 1165 | done: |
1da177e4 | 1166 | spin_unlock_irqrestore (&ehci->lock, flags); |
8de98402 | 1167 | if (unlikely (qh == NULL)) |
1da177e4 | 1168 | qtd_list_free (ehci, urb, qtd_list); |
8de98402 | 1169 | return rc; |
1da177e4 LT |
1170 | } |
1171 | ||
1172 | /*-------------------------------------------------------------------------*/ | |
1173 | ||
3c273a05 | 1174 | static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) |
1da177e4 | 1175 | { |
3c273a05 | 1176 | struct ehci_qh *prev; |
1da177e4 | 1177 | |
3c273a05 AS |
1178 | /* Add to the end of the list of QHs waiting for the next IAAD */ |
1179 | qh->qh_state = QH_STATE_UNLINK; | |
1180 | if (ehci->async_unlink) | |
1181 | ehci->async_unlink_last->unlink_next = qh; | |
1182 | else | |
1183 | ehci->async_unlink = qh; | |
1184 | ehci->async_unlink_last = qh; | |
1185 | ||
1186 | /* Unlink it from the schedule */ | |
1187 | prev = ehci->async; | |
1188 | while (prev->qh_next.qh != qh) | |
1189 | prev = prev->qh_next.qh; | |
1190 | ||
1191 | prev->hw->hw_next = qh->hw->hw_next; | |
1192 | prev->qh_next = qh->qh_next; | |
1193 | if (ehci->qh_scan_next == qh) | |
1194 | ehci->qh_scan_next = qh->qh_next.qh; | |
1195 | } | |
1da177e4 | 1196 | |
3c273a05 AS |
1197 | static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) |
1198 | { | |
1199 | /* | |
1200 | * Do nothing if an IAA cycle is already running or | |
1201 | * if one will be started shortly. | |
1202 | */ | |
1203 | if (ehci->async_iaa || ehci->async_unlinking) | |
1204 | return; | |
1da177e4 | 1205 | |
3c273a05 AS |
1206 | /* Do all the waiting QHs at once */ |
1207 | ehci->async_iaa = ehci->async_unlink; | |
1208 | ehci->async_unlink = NULL; | |
1da177e4 | 1209 | |
3c273a05 AS |
1210 | /* If the controller isn't running, we don't have to wait for it */ |
1211 | if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) { | |
1212 | if (!nested) /* Avoid recursion */ | |
1213 | end_unlink_async(ehci); | |
31446610 | 1214 | |
3c273a05 | 1215 | /* Otherwise start a new IAA cycle */ |
32830f20 | 1216 | } else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) { |
3c273a05 AS |
1217 | /* Make sure the unlinks are all visible to the hardware */ |
1218 | wmb(); | |
1da177e4 | 1219 | |
3c273a05 AS |
1220 | ehci_writel(ehci, ehci->command | CMD_IAAD, |
1221 | &ehci->regs->command); | |
1222 | ehci_readl(ehci, &ehci->regs->command); | |
1223 | ehci_enable_event(ehci, EHCI_HRTIMER_IAA_WATCHDOG, true); | |
1da177e4 | 1224 | } |
3c273a05 AS |
1225 | } |
1226 | ||
1227 | /* the async qh for the qtds being unlinked are now gone from the HC */ | |
1228 | ||
1229 | static void end_unlink_async(struct ehci_hcd *ehci) | |
1230 | { | |
1231 | struct ehci_qh *qh; | |
2f7ac6c1 GJ |
1232 | |
1233 | if (ehci->has_synopsys_hc_bug) | |
1234 | ehci_writel(ehci, (u32) ehci->async->qh_dma, | |
1235 | &ehci->regs->async_next); | |
3c273a05 AS |
1236 | |
1237 | /* Process the idle QHs */ | |
1238 | restart: | |
1239 | ehci->async_unlinking = true; | |
1240 | while (ehci->async_iaa) { | |
1241 | qh = ehci->async_iaa; | |
1242 | ehci->async_iaa = qh->unlink_next; | |
1243 | qh->unlink_next = NULL; | |
1244 | ||
1245 | qh->qh_state = QH_STATE_IDLE; | |
1246 | qh->qh_next.qh = NULL; | |
1247 | ||
1248 | qh_completions(ehci, qh); | |
1249 | if (!list_empty(&qh->qtd_list) && | |
1250 | ehci->rh_state == EHCI_RH_RUNNING) | |
1251 | qh_link_async(ehci, qh); | |
1252 | disable_async(ehci); | |
1253 | } | |
1254 | ehci->async_unlinking = false; | |
1255 | ||
1256 | /* Start a new IAA cycle if any QHs are waiting for it */ | |
1257 | if (ehci->async_unlink) { | |
1258 | start_iaa_cycle(ehci, true); | |
1259 | if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) | |
1260 | goto restart; | |
1261 | } | |
1da177e4 LT |
1262 | } |
1263 | ||
32830f20 AS |
1264 | static void unlink_empty_async(struct ehci_hcd *ehci) |
1265 | { | |
1266 | struct ehci_qh *qh, *next; | |
1267 | bool stopped = (ehci->rh_state < EHCI_RH_RUNNING); | |
1268 | bool check_unlinks_later = false; | |
1269 | ||
1270 | /* Unlink all the async QHs that have been empty for a timer cycle */ | |
1271 | next = ehci->async->qh_next.qh; | |
1272 | while (next) { | |
1273 | qh = next; | |
1274 | next = qh->qh_next.qh; | |
1275 | ||
1276 | if (list_empty(&qh->qtd_list) && | |
1277 | qh->qh_state == QH_STATE_LINKED) { | |
1278 | if (!stopped && qh->unlink_cycle == | |
1279 | ehci->async_unlink_cycle) | |
1280 | check_unlinks_later = true; | |
1281 | else | |
1282 | single_unlink_async(ehci, qh); | |
1283 | } | |
1284 | } | |
1285 | ||
1286 | /* Start a new IAA cycle if any QHs are waiting for it */ | |
1287 | if (ehci->async_unlink) | |
1288 | start_iaa_cycle(ehci, false); | |
1289 | ||
1290 | /* QHs that haven't been empty for long enough will be handled later */ | |
1291 | if (check_unlinks_later) { | |
1292 | ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true); | |
1293 | ++ehci->async_unlink_cycle; | |
1294 | } | |
1295 | } | |
1296 | ||
1da177e4 LT |
1297 | /* makes sure the async qh will become idle */ |
1298 | /* caller must own ehci->lock */ | |
1299 | ||
3c273a05 | 1300 | static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) |
1da177e4 | 1301 | { |
3c273a05 AS |
1302 | /* |
1303 | * If the QH isn't linked then there's nothing we can do | |
1304 | * unless we were called during a giveback, in which case | |
1305 | * qh_completions() has to deal with it. | |
1306 | */ | |
1307 | if (qh->qh_state != QH_STATE_LINKED) { | |
1308 | if (qh->qh_state == QH_STATE_COMPLETING) | |
1309 | qh->needs_rescan = 1; | |
1da177e4 LT |
1310 | return; |
1311 | } | |
1312 | ||
3c273a05 AS |
1313 | single_unlink_async(ehci, qh); |
1314 | start_iaa_cycle(ehci, false); | |
1da177e4 LT |
1315 | } |
1316 | ||
1317 | /*-------------------------------------------------------------------------*/ | |
1318 | ||
7d12e780 | 1319 | static void scan_async (struct ehci_hcd *ehci) |
1da177e4 LT |
1320 | { |
1321 | struct ehci_qh *qh; | |
32830f20 | 1322 | bool check_unlinks_later = false; |
1da177e4 | 1323 | |
004c1968 AS |
1324 | ehci->qh_scan_next = ehci->async->qh_next.qh; |
1325 | while (ehci->qh_scan_next) { | |
1326 | qh = ehci->qh_scan_next; | |
1327 | ehci->qh_scan_next = qh->qh_next.qh; | |
1328 | rescan: | |
1329 | /* clean any finished work for this qh */ | |
1330 | if (!list_empty(&qh->qtd_list)) { | |
1331 | int temp; | |
1332 | ||
1333 | /* | |
1334 | * Unlinks could happen here; completion reporting | |
1335 | * drops the lock. That's why ehci->qh_scan_next | |
1336 | * always holds the next qh to scan; if the next qh | |
1337 | * gets unlinked then ehci->qh_scan_next is adjusted | |
3c273a05 | 1338 | * in single_unlink_async(). |
1da177e4 | 1339 | */ |
004c1968 | 1340 | temp = qh_completions(ehci, qh); |
32830f20 | 1341 | if (qh->needs_rescan) { |
3c273a05 | 1342 | start_unlink_async(ehci, qh); |
32830f20 AS |
1343 | } else if (list_empty(&qh->qtd_list) |
1344 | && qh->qh_state == QH_STATE_LINKED) { | |
1345 | qh->unlink_cycle = ehci->async_unlink_cycle; | |
1346 | check_unlinks_later = true; | |
1347 | } else if (temp != 0) | |
004c1968 AS |
1348 | goto rescan; |
1349 | } | |
32830f20 | 1350 | } |
1da177e4 | 1351 | |
32830f20 AS |
1352 | /* |
1353 | * Unlink empty entries, reducing DMA usage as well | |
1354 | * as HCD schedule-scanning costs. Delay for any qh | |
1355 | * we just scanned, there's a not-unusual case that it | |
1356 | * doesn't stay idle for long. | |
1357 | */ | |
1358 | if (check_unlinks_later && ehci->rh_state == EHCI_RH_RUNNING && | |
1359 | !(ehci->enabled_hrtimer_events & | |
1360 | BIT(EHCI_HRTIMER_ASYNC_UNLINKS))) { | |
1361 | ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true); | |
1362 | ++ehci->async_unlink_cycle; | |
1da177e4 | 1363 | } |
1da177e4 | 1364 | } |