Commit | Line | Data |
---|---|---|
4808a1c0 OK |
1 | /* |
2 | * ISP116x HCD (Host Controller Driver) for USB. | |
3 | * | |
4 | * Derived from the SL811 HCD, rewritten for ISP116x. | |
5 | * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee> | |
6 | * | |
7 | * Portions: | |
8 | * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) | |
9 | * Copyright (C) 2004 David Brownell | |
10 | * | |
11 | * Periodic scheduling is based on Roman's OHCI code | |
12 | * Copyright (C) 1999 Roman Weissgaerber | |
13 | * | |
14 | */ | |
15 | ||
16 | /* | |
17 | * The driver basically works. A number of people have used it with a range | |
18 | * of devices. | |
19 | * | |
17f8bb73 | 20 | * The driver passes all usbtests 1-14. |
4808a1c0 OK |
21 | * |
22 | * Suspending/resuming of root hub via sysfs works. Remote wakeup works too. | |
23 | * And suspending/resuming of platform device works too. Suspend/resume | |
24 | * via HCD operations vector is not implemented. | |
25 | * | |
26 | * Iso transfer support is not implemented. Adding this would include | |
27 | * implementing recovery from the failure to service the processed ITL | |
28 | * fifo ram in time, which will involve chip reset. | |
29 | * | |
30 | * TODO: | |
31 | + More testing of suspend/resume. | |
32 | */ | |
33 | ||
34 | /* | |
35 | ISP116x chips require certain delays between accesses to its | |
36 | registers. The following timing options exist. | |
37 | ||
38 | 1. Configure your memory controller (the best) | |
39 | 2. Implement platform-specific delay function possibly | |
40 | combined with configuring the memory controller; see | |
41 | include/linux/usb-isp116x.h for more info. Some broken | |
42 | memory controllers line LH7A400 SMC need this. Also, | |
43 | uncomment for that to work the following | |
44 | USE_PLATFORM_DELAY macro. | |
45 | 3. Use ndelay (easiest, poorest). For that, uncomment | |
46 | the following USE_NDELAY macro. | |
47 | */ | |
48 | #define USE_PLATFORM_DELAY | |
49 | //#define USE_NDELAY | |
50 | ||
51 | //#define DEBUG | |
52 | //#define VERBOSE | |
53 | /* Transfer descriptors. See dump_ptd() for printout format */ | |
54 | //#define PTD_TRACE | |
55 | /* enqueuing/finishing log of urbs */ | |
56 | //#define URB_TRACE | |
57 | ||
58 | #include <linux/config.h> | |
59 | #include <linux/module.h> | |
60 | #include <linux/moduleparam.h> | |
61 | #include <linux/kernel.h> | |
62 | #include <linux/delay.h> | |
63 | #include <linux/ioport.h> | |
64 | #include <linux/sched.h> | |
65 | #include <linux/slab.h> | |
66 | #include <linux/smp_lock.h> | |
67 | #include <linux/errno.h> | |
68 | #include <linux/init.h> | |
69 | #include <linux/list.h> | |
70 | #include <linux/interrupt.h> | |
71 | #include <linux/usb.h> | |
72 | #include <linux/usb_isp116x.h> | |
73 | ||
74 | #include <asm/io.h> | |
75 | #include <asm/irq.h> | |
76 | #include <asm/system.h> | |
77 | #include <asm/byteorder.h> | |
78 | ||
79 | #ifndef DEBUG | |
80 | # define STUB_DEBUG_FILE | |
81 | #endif | |
82 | ||
83 | #include "../core/hcd.h" | |
84 | #include "isp116x.h" | |
85 | ||
86 | #define DRIVER_VERSION "08 Apr 2005" | |
87 | #define DRIVER_DESC "ISP116x USB Host Controller Driver" | |
88 | ||
89 | MODULE_DESCRIPTION(DRIVER_DESC); | |
90 | MODULE_LICENSE("GPL"); | |
91 | ||
92 | static const char hcd_name[] = "isp116x-hcd"; | |
93 | ||
94 | /*-----------------------------------------------------------------*/ | |
95 | ||
96 | /* | |
97 | Write len bytes to fifo, pad till 32-bit boundary | |
98 | */ | |
99 | static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len) | |
100 | { | |
101 | u8 *dp = (u8 *) buf; | |
102 | u16 *dp2 = (u16 *) buf; | |
103 | u16 w; | |
104 | int quot = len % 4; | |
105 | ||
106 | if ((unsigned long)dp2 & 1) { | |
107 | /* not aligned */ | |
108 | for (; len > 1; len -= 2) { | |
109 | w = *dp++; | |
110 | w |= *dp++ << 8; | |
111 | isp116x_raw_write_data16(isp116x, w); | |
112 | } | |
113 | if (len) | |
114 | isp116x_write_data16(isp116x, (u16) * dp); | |
115 | } else { | |
116 | /* aligned */ | |
117 | for (; len > 1; len -= 2) | |
118 | isp116x_raw_write_data16(isp116x, *dp2++); | |
119 | if (len) | |
120 | isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2)); | |
121 | } | |
122 | if (quot == 1 || quot == 2) | |
123 | isp116x_raw_write_data16(isp116x, 0); | |
124 | } | |
125 | ||
126 | /* | |
127 | Read len bytes from fifo and then read till 32-bit boundary. | |
128 | */ | |
129 | static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len) | |
130 | { | |
131 | u8 *dp = (u8 *) buf; | |
132 | u16 *dp2 = (u16 *) buf; | |
133 | u16 w; | |
134 | int quot = len % 4; | |
135 | ||
136 | if ((unsigned long)dp2 & 1) { | |
137 | /* not aligned */ | |
138 | for (; len > 1; len -= 2) { | |
139 | w = isp116x_raw_read_data16(isp116x); | |
140 | *dp++ = w & 0xff; | |
141 | *dp++ = (w >> 8) & 0xff; | |
142 | } | |
143 | if (len) | |
144 | *dp = 0xff & isp116x_read_data16(isp116x); | |
145 | } else { | |
146 | /* aligned */ | |
147 | for (; len > 1; len -= 2) | |
148 | *dp2++ = isp116x_raw_read_data16(isp116x); | |
149 | if (len) | |
150 | *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x); | |
151 | } | |
152 | if (quot == 1 || quot == 2) | |
153 | isp116x_raw_read_data16(isp116x); | |
154 | } | |
155 | ||
156 | /* | |
157 | Write ptd's and data for scheduled transfers into | |
158 | the fifo ram. Fifo must be empty and ready. | |
159 | */ | |
160 | static void pack_fifo(struct isp116x *isp116x) | |
161 | { | |
162 | struct isp116x_ep *ep; | |
163 | struct ptd *ptd; | |
164 | int buflen = isp116x->atl_last_dir == PTD_DIR_IN | |
165 | ? isp116x->atl_bufshrt : isp116x->atl_buflen; | |
166 | int ptd_count = 0; | |
167 | ||
168 | isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); | |
169 | isp116x_write_reg16(isp116x, HCXFERCTR, buflen); | |
170 | isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); | |
171 | for (ep = isp116x->atl_active; ep; ep = ep->active) { | |
172 | ++ptd_count; | |
173 | ptd = &ep->ptd; | |
174 | dump_ptd(ptd); | |
175 | dump_ptd_out_data(ptd, ep->data); | |
176 | isp116x_write_data16(isp116x, ptd->count); | |
177 | isp116x_write_data16(isp116x, ptd->mps); | |
178 | isp116x_write_data16(isp116x, ptd->len); | |
179 | isp116x_write_data16(isp116x, ptd->faddr); | |
180 | buflen -= sizeof(struct ptd); | |
181 | /* Skip writing data for last IN PTD */ | |
182 | if (ep->active || (isp116x->atl_last_dir != PTD_DIR_IN)) { | |
183 | write_ptddata_to_fifo(isp116x, ep->data, ep->length); | |
184 | buflen -= ALIGN(ep->length, 4); | |
185 | } | |
186 | } | |
187 | BUG_ON(buflen); | |
188 | } | |
189 | ||
190 | /* | |
191 | Read the processed ptd's and data from fifo ram back to | |
192 | URBs' buffers. Fifo must be full and done | |
193 | */ | |
194 | static void unpack_fifo(struct isp116x *isp116x) | |
195 | { | |
196 | struct isp116x_ep *ep; | |
197 | struct ptd *ptd; | |
198 | int buflen = isp116x->atl_last_dir == PTD_DIR_IN | |
199 | ? isp116x->atl_buflen : isp116x->atl_bufshrt; | |
200 | ||
201 | isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); | |
202 | isp116x_write_reg16(isp116x, HCXFERCTR, buflen); | |
203 | isp116x_write_addr(isp116x, HCATLPORT); | |
204 | for (ep = isp116x->atl_active; ep; ep = ep->active) { | |
205 | ptd = &ep->ptd; | |
206 | ptd->count = isp116x_read_data16(isp116x); | |
207 | ptd->mps = isp116x_read_data16(isp116x); | |
208 | ptd->len = isp116x_read_data16(isp116x); | |
209 | ptd->faddr = isp116x_read_data16(isp116x); | |
210 | buflen -= sizeof(struct ptd); | |
211 | /* Skip reading data for last Setup or Out PTD */ | |
212 | if (ep->active || (isp116x->atl_last_dir == PTD_DIR_IN)) { | |
213 | read_ptddata_from_fifo(isp116x, ep->data, ep->length); | |
214 | buflen -= ALIGN(ep->length, 4); | |
215 | } | |
216 | dump_ptd(ptd); | |
217 | dump_ptd_in_data(ptd, ep->data); | |
218 | } | |
219 | BUG_ON(buflen); | |
220 | } | |
221 | ||
222 | /*---------------------------------------------------------------*/ | |
223 | ||
224 | /* | |
225 | Set up PTD's. | |
226 | */ | |
227 | static void preproc_atl_queue(struct isp116x *isp116x) | |
228 | { | |
229 | struct isp116x_ep *ep; | |
230 | struct urb *urb; | |
231 | struct ptd *ptd; | |
f10eff26 | 232 | u16 len; |
4808a1c0 OK |
233 | |
234 | for (ep = isp116x->atl_active; ep; ep = ep->active) { | |
f10eff26 OK |
235 | u16 toggle = 0, dir = PTD_DIR_SETUP; |
236 | ||
4808a1c0 OK |
237 | BUG_ON(list_empty(&ep->hep->urb_list)); |
238 | urb = container_of(ep->hep->urb_list.next, | |
239 | struct urb, urb_list); | |
240 | ptd = &ep->ptd; | |
241 | len = ep->length; | |
242 | spin_lock(&urb->lock); | |
243 | ep->data = (unsigned char *)urb->transfer_buffer | |
244 | + urb->actual_length; | |
245 | ||
246 | switch (ep->nextpid) { | |
247 | case USB_PID_IN: | |
248 | toggle = usb_gettoggle(urb->dev, ep->epnum, 0); | |
249 | dir = PTD_DIR_IN; | |
250 | break; | |
251 | case USB_PID_OUT: | |
252 | toggle = usb_gettoggle(urb->dev, ep->epnum, 1); | |
253 | dir = PTD_DIR_OUT; | |
254 | break; | |
255 | case USB_PID_SETUP: | |
4808a1c0 OK |
256 | len = sizeof(struct usb_ctrlrequest); |
257 | ep->data = urb->setup_packet; | |
258 | break; | |
259 | case USB_PID_ACK: | |
260 | toggle = 1; | |
261 | len = 0; | |
262 | dir = (urb->transfer_buffer_length | |
263 | && usb_pipein(urb->pipe)) | |
264 | ? PTD_DIR_OUT : PTD_DIR_IN; | |
265 | break; | |
266 | default: | |
4808a1c0 OK |
267 | ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__, |
268 | ep->nextpid); | |
17f8bb73 | 269 | BUG(); |
4808a1c0 OK |
270 | } |
271 | ||
272 | ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle); | |
273 | ptd->mps = PTD_MPS(ep->maxpacket) | |
274 | | PTD_SPD(urb->dev->speed == USB_SPEED_LOW) | |
275 | | PTD_EP(ep->epnum); | |
276 | ptd->len = PTD_LEN(len) | PTD_DIR(dir); | |
277 | ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe)); | |
278 | spin_unlock(&urb->lock); | |
279 | if (!ep->active) { | |
280 | ptd->mps |= PTD_LAST_MSK; | |
281 | isp116x->atl_last_dir = dir; | |
282 | } | |
283 | isp116x->atl_bufshrt = sizeof(struct ptd) + isp116x->atl_buflen; | |
284 | isp116x->atl_buflen = isp116x->atl_bufshrt + ALIGN(len, 4); | |
285 | } | |
286 | } | |
287 | ||
288 | /* | |
289 | Analyze transfer results, handle partial transfers and errors | |
290 | */ | |
291 | static void postproc_atl_queue(struct isp116x *isp116x) | |
292 | { | |
293 | struct isp116x_ep *ep; | |
294 | struct urb *urb; | |
295 | struct usb_device *udev; | |
296 | struct ptd *ptd; | |
297 | int short_not_ok; | |
298 | u8 cc; | |
299 | ||
300 | for (ep = isp116x->atl_active; ep; ep = ep->active) { | |
301 | BUG_ON(list_empty(&ep->hep->urb_list)); | |
302 | urb = | |
303 | container_of(ep->hep->urb_list.next, struct urb, urb_list); | |
304 | udev = urb->dev; | |
305 | ptd = &ep->ptd; | |
306 | cc = PTD_GET_CC(ptd); | |
307 | ||
308 | spin_lock(&urb->lock); | |
309 | short_not_ok = 1; | |
310 | ||
311 | /* Data underrun is special. For allowed underrun | |
312 | we clear the error and continue as normal. For | |
313 | forbidden underrun we finish the DATA stage | |
314 | immediately while for control transfer, | |
315 | we do a STATUS stage. */ | |
316 | if (cc == TD_DATAUNDERRUN) { | |
317 | if (!(urb->transfer_flags & URB_SHORT_NOT_OK)) { | |
318 | DBG("Allowed data underrun\n"); | |
319 | cc = TD_CC_NOERROR; | |
320 | short_not_ok = 0; | |
321 | } else { | |
322 | ep->error_count = 1; | |
323 | if (usb_pipecontrol(urb->pipe)) | |
324 | ep->nextpid = USB_PID_ACK; | |
325 | else | |
326 | usb_settoggle(udev, ep->epnum, | |
327 | ep->nextpid == | |
328 | USB_PID_OUT, | |
329 | PTD_GET_TOGGLE(ptd) ^ 1); | |
330 | urb->status = cc_to_error[TD_DATAUNDERRUN]; | |
331 | spin_unlock(&urb->lock); | |
332 | continue; | |
333 | } | |
334 | } | |
335 | /* Keep underrun error through the STATUS stage */ | |
336 | if (urb->status == cc_to_error[TD_DATAUNDERRUN]) | |
337 | cc = TD_DATAUNDERRUN; | |
338 | ||
339 | if (cc != TD_CC_NOERROR && cc != TD_NOTACCESSED | |
340 | && (++ep->error_count >= 3 || cc == TD_CC_STALL | |
341 | || cc == TD_DATAOVERRUN)) { | |
342 | if (urb->status == -EINPROGRESS) | |
343 | urb->status = cc_to_error[cc]; | |
344 | if (ep->nextpid == USB_PID_ACK) | |
345 | ep->nextpid = 0; | |
346 | spin_unlock(&urb->lock); | |
347 | continue; | |
348 | } | |
349 | /* According to usb spec, zero-length Int transfer signals | |
350 | finishing of the urb. Hey, does this apply only | |
351 | for IN endpoints? */ | |
352 | if (usb_pipeint(urb->pipe) && !PTD_GET_LEN(ptd)) { | |
353 | if (urb->status == -EINPROGRESS) | |
354 | urb->status = 0; | |
355 | spin_unlock(&urb->lock); | |
356 | continue; | |
357 | } | |
358 | ||
359 | /* Relax after previously failed, but later succeeded | |
360 | or correctly NAK'ed retransmission attempt */ | |
361 | if (ep->error_count | |
362 | && (cc == TD_CC_NOERROR || cc == TD_NOTACCESSED)) | |
363 | ep->error_count = 0; | |
364 | ||
365 | /* Take into account idiosyncracies of the isp116x chip | |
366 | regarding toggle bit for failed transfers */ | |
367 | if (ep->nextpid == USB_PID_OUT) | |
368 | usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd) | |
369 | ^ (ep->error_count > 0)); | |
370 | else if (ep->nextpid == USB_PID_IN) | |
371 | usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd) | |
372 | ^ (ep->error_count > 0)); | |
373 | ||
374 | switch (ep->nextpid) { | |
375 | case USB_PID_IN: | |
376 | case USB_PID_OUT: | |
377 | urb->actual_length += PTD_GET_COUNT(ptd); | |
378 | if (PTD_GET_ACTIVE(ptd) | |
379 | || (cc != TD_CC_NOERROR && cc < 0x0E)) | |
380 | break; | |
381 | if (urb->transfer_buffer_length != urb->actual_length) { | |
382 | if (short_not_ok) | |
383 | break; | |
384 | } else { | |
385 | if (urb->transfer_flags & URB_ZERO_PACKET | |
386 | && ep->nextpid == USB_PID_OUT | |
387 | && !(PTD_GET_COUNT(ptd) % ep->maxpacket)) { | |
388 | DBG("Zero packet requested\n"); | |
389 | break; | |
390 | } | |
391 | } | |
392 | /* All data for this URB is transferred, let's finish */ | |
393 | if (usb_pipecontrol(urb->pipe)) | |
394 | ep->nextpid = USB_PID_ACK; | |
395 | else if (urb->status == -EINPROGRESS) | |
396 | urb->status = 0; | |
397 | break; | |
398 | case USB_PID_SETUP: | |
399 | if (PTD_GET_ACTIVE(ptd) | |
400 | || (cc != TD_CC_NOERROR && cc < 0x0E)) | |
401 | break; | |
402 | if (urb->transfer_buffer_length == urb->actual_length) | |
403 | ep->nextpid = USB_PID_ACK; | |
404 | else if (usb_pipeout(urb->pipe)) { | |
405 | usb_settoggle(udev, 0, 1, 1); | |
406 | ep->nextpid = USB_PID_OUT; | |
407 | } else { | |
408 | usb_settoggle(udev, 0, 0, 1); | |
409 | ep->nextpid = USB_PID_IN; | |
410 | } | |
411 | break; | |
412 | case USB_PID_ACK: | |
413 | if (PTD_GET_ACTIVE(ptd) | |
414 | || (cc != TD_CC_NOERROR && cc < 0x0E)) | |
415 | break; | |
416 | if (urb->status == -EINPROGRESS) | |
417 | urb->status = 0; | |
418 | ep->nextpid = 0; | |
419 | break; | |
420 | default: | |
421 | BUG_ON(1); | |
422 | } | |
423 | spin_unlock(&urb->lock); | |
424 | } | |
425 | } | |
426 | ||
427 | /* | |
428 | Take done or failed requests out of schedule. Give back | |
429 | processed urbs. | |
430 | */ | |
431 | static void finish_request(struct isp116x *isp116x, struct isp116x_ep *ep, | |
432 | struct urb *urb, struct pt_regs *regs) | |
433 | __releases(isp116x->lock) __acquires(isp116x->lock) | |
434 | { | |
435 | unsigned i; | |
436 | ||
437 | urb->hcpriv = NULL; | |
438 | ep->error_count = 0; | |
439 | ||
440 | if (usb_pipecontrol(urb->pipe)) | |
441 | ep->nextpid = USB_PID_SETUP; | |
442 | ||
443 | urb_dbg(urb, "Finish"); | |
444 | ||
445 | spin_unlock(&isp116x->lock); | |
446 | usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb, regs); | |
447 | spin_lock(&isp116x->lock); | |
448 | ||
449 | /* take idle endpoints out of the schedule */ | |
450 | if (!list_empty(&ep->hep->urb_list)) | |
451 | return; | |
452 | ||
453 | /* async deschedule */ | |
454 | if (!list_empty(&ep->schedule)) { | |
455 | list_del_init(&ep->schedule); | |
456 | return; | |
457 | } | |
458 | ||
459 | /* periodic deschedule */ | |
460 | DBG("deschedule qh%d/%p branch %d\n", ep->period, ep, ep->branch); | |
461 | for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) { | |
462 | struct isp116x_ep *temp; | |
463 | struct isp116x_ep **prev = &isp116x->periodic[i]; | |
464 | ||
465 | while (*prev && ((temp = *prev) != ep)) | |
466 | prev = &temp->next; | |
467 | if (*prev) | |
468 | *prev = ep->next; | |
469 | isp116x->load[i] -= ep->load; | |
470 | } | |
471 | ep->branch = PERIODIC_SIZE; | |
472 | isp116x_to_hcd(isp116x)->self.bandwidth_allocated -= | |
473 | ep->load / ep->period; | |
474 | ||
475 | /* switch irq type? */ | |
476 | if (!--isp116x->periodic_count) { | |
477 | isp116x->irqenb &= ~HCuPINT_SOF; | |
478 | isp116x->irqenb |= HCuPINT_ATL; | |
479 | } | |
480 | } | |
481 | ||
482 | /* | |
483 | Scan transfer lists, schedule transfers, send data off | |
484 | to chip. | |
485 | */ | |
486 | static void start_atl_transfers(struct isp116x *isp116x) | |
487 | { | |
488 | struct isp116x_ep *last_ep = NULL, *ep; | |
489 | struct urb *urb; | |
490 | u16 load = 0; | |
491 | int len, index, speed, byte_time; | |
492 | ||
493 | if (atomic_read(&isp116x->atl_finishing)) | |
494 | return; | |
495 | ||
496 | if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state)) | |
497 | return; | |
498 | ||
499 | /* FIFO not empty? */ | |
500 | if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) | |
501 | return; | |
502 | ||
503 | isp116x->atl_active = NULL; | |
504 | isp116x->atl_buflen = isp116x->atl_bufshrt = 0; | |
505 | ||
506 | /* Schedule int transfers */ | |
507 | if (isp116x->periodic_count) { | |
508 | isp116x->fmindex = index = | |
509 | (isp116x->fmindex + 1) & (PERIODIC_SIZE - 1); | |
510 | if ((load = isp116x->load[index])) { | |
511 | /* Bring all int transfers for this frame | |
512 | into the active queue */ | |
513 | isp116x->atl_active = last_ep = | |
514 | isp116x->periodic[index]; | |
515 | while (last_ep->next) | |
516 | last_ep = (last_ep->active = last_ep->next); | |
517 | last_ep->active = NULL; | |
518 | } | |
519 | } | |
520 | ||
521 | /* Schedule control/bulk transfers */ | |
522 | list_for_each_entry(ep, &isp116x->async, schedule) { | |
523 | urb = container_of(ep->hep->urb_list.next, | |
524 | struct urb, urb_list); | |
525 | speed = urb->dev->speed; | |
526 | byte_time = speed == USB_SPEED_LOW | |
527 | ? BYTE_TIME_LOWSPEED : BYTE_TIME_FULLSPEED; | |
528 | ||
529 | if (ep->nextpid == USB_PID_SETUP) { | |
530 | len = sizeof(struct usb_ctrlrequest); | |
531 | } else if (ep->nextpid == USB_PID_ACK) { | |
532 | len = 0; | |
533 | } else { | |
534 | /* Find current free length ... */ | |
535 | len = (MAX_LOAD_LIMIT - load) / byte_time; | |
536 | ||
537 | /* ... then limit it to configured max size ... */ | |
538 | len = min(len, speed == USB_SPEED_LOW ? | |
539 | MAX_TRANSFER_SIZE_LOWSPEED : | |
540 | MAX_TRANSFER_SIZE_FULLSPEED); | |
541 | ||
542 | /* ... and finally cut to the multiple of MaxPacketSize, | |
543 | or to the real length if there's enough room. */ | |
544 | if (len < | |
545 | (urb->transfer_buffer_length - | |
546 | urb->actual_length)) { | |
547 | len -= len % ep->maxpacket; | |
548 | if (!len) | |
549 | continue; | |
550 | } else | |
551 | len = urb->transfer_buffer_length - | |
552 | urb->actual_length; | |
553 | BUG_ON(len < 0); | |
554 | } | |
555 | ||
556 | load += len * byte_time; | |
557 | if (load > MAX_LOAD_LIMIT) | |
558 | break; | |
559 | ||
560 | ep->active = NULL; | |
561 | ep->length = len; | |
562 | if (last_ep) | |
563 | last_ep->active = ep; | |
564 | else | |
565 | isp116x->atl_active = ep; | |
566 | last_ep = ep; | |
567 | } | |
568 | ||
569 | /* Avoid starving of endpoints */ | |
570 | if ((&isp116x->async)->next != (&isp116x->async)->prev) | |
571 | list_move(&isp116x->async, (&isp116x->async)->next); | |
572 | ||
573 | if (isp116x->atl_active) { | |
574 | preproc_atl_queue(isp116x); | |
575 | pack_fifo(isp116x); | |
576 | } | |
577 | } | |
578 | ||
579 | /* | |
580 | Finish the processed transfers | |
581 | */ | |
582 | static void finish_atl_transfers(struct isp116x *isp116x, struct pt_regs *regs) | |
583 | { | |
584 | struct isp116x_ep *ep; | |
585 | struct urb *urb; | |
586 | ||
587 | if (!isp116x->atl_active) | |
588 | return; | |
589 | /* Fifo not ready? */ | |
590 | if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) | |
591 | return; | |
592 | ||
593 | atomic_inc(&isp116x->atl_finishing); | |
594 | unpack_fifo(isp116x); | |
595 | postproc_atl_queue(isp116x); | |
596 | for (ep = isp116x->atl_active; ep; ep = ep->active) { | |
597 | urb = | |
598 | container_of(ep->hep->urb_list.next, struct urb, urb_list); | |
599 | /* USB_PID_ACK check here avoids finishing of | |
600 | control transfers, for which TD_DATAUNDERRUN | |
601 | occured, while URB_SHORT_NOT_OK was set */ | |
602 | if (urb && urb->status != -EINPROGRESS | |
603 | && ep->nextpid != USB_PID_ACK) | |
604 | finish_request(isp116x, ep, urb, regs); | |
605 | } | |
606 | atomic_dec(&isp116x->atl_finishing); | |
607 | } | |
608 | ||
609 | static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) | |
610 | { | |
611 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
612 | u16 irqstat; | |
613 | irqreturn_t ret = IRQ_NONE; | |
614 | ||
615 | spin_lock(&isp116x->lock); | |
616 | isp116x_write_reg16(isp116x, HCuPINTENB, 0); | |
617 | irqstat = isp116x_read_reg16(isp116x, HCuPINT); | |
618 | isp116x_write_reg16(isp116x, HCuPINT, irqstat); | |
619 | ||
620 | if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) { | |
621 | ret = IRQ_HANDLED; | |
622 | finish_atl_transfers(isp116x, regs); | |
623 | } | |
624 | ||
625 | if (irqstat & HCuPINT_OPR) { | |
626 | u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT); | |
627 | isp116x_write_reg32(isp116x, HCINTSTAT, intstat); | |
628 | if (intstat & HCINT_UE) { | |
629 | ERR("Unrecoverable error\n"); | |
630 | /* What should we do here? Reset? */ | |
631 | } | |
632 | if (intstat & HCINT_RHSC) { | |
633 | isp116x->rhstatus = | |
634 | isp116x_read_reg32(isp116x, HCRHSTATUS); | |
635 | isp116x->rhport[0] = | |
636 | isp116x_read_reg32(isp116x, HCRHPORT1); | |
637 | isp116x->rhport[1] = | |
638 | isp116x_read_reg32(isp116x, HCRHPORT2); | |
639 | } | |
640 | if (intstat & HCINT_RD) { | |
641 | DBG("---- remote wakeup\n"); | |
642 | schedule_work(&isp116x->rh_resume); | |
643 | ret = IRQ_HANDLED; | |
644 | } | |
645 | irqstat &= ~HCuPINT_OPR; | |
646 | ret = IRQ_HANDLED; | |
647 | } | |
648 | ||
649 | if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) { | |
650 | start_atl_transfers(isp116x); | |
651 | } | |
652 | ||
653 | isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb); | |
654 | spin_unlock(&isp116x->lock); | |
655 | return ret; | |
656 | } | |
657 | ||
658 | /*-----------------------------------------------------------------*/ | |
659 | ||
660 | /* usb 1.1 says max 90% of a frame is available for periodic transfers. | |
661 | * this driver doesn't promise that much since it's got to handle an | |
662 | * IRQ per packet; irq handling latencies also use up that time. | |
663 | */ | |
664 | ||
665 | /* out of 1000 us */ | |
666 | #define MAX_PERIODIC_LOAD 600 | |
667 | static int balance(struct isp116x *isp116x, u16 period, u16 load) | |
668 | { | |
669 | int i, branch = -ENOSPC; | |
670 | ||
671 | /* search for the least loaded schedule branch of that period | |
672 | which has enough bandwidth left unreserved. */ | |
673 | for (i = 0; i < period; i++) { | |
674 | if (branch < 0 || isp116x->load[branch] > isp116x->load[i]) { | |
675 | int j; | |
676 | ||
677 | for (j = i; j < PERIODIC_SIZE; j += period) { | |
678 | if ((isp116x->load[j] + load) | |
679 | > MAX_PERIODIC_LOAD) | |
680 | break; | |
681 | } | |
682 | if (j < PERIODIC_SIZE) | |
683 | continue; | |
684 | branch = i; | |
685 | } | |
686 | } | |
687 | return branch; | |
688 | } | |
689 | ||
690 | /* NB! ALL the code above this point runs with isp116x->lock | |
691 | held, irqs off | |
692 | */ | |
693 | ||
694 | /*-----------------------------------------------------------------*/ | |
695 | ||
696 | static int isp116x_urb_enqueue(struct usb_hcd *hcd, | |
697 | struct usb_host_endpoint *hep, struct urb *urb, | |
5db539e4 | 698 | unsigned mem_flags) |
4808a1c0 OK |
699 | { |
700 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
701 | struct usb_device *udev = urb->dev; | |
702 | unsigned int pipe = urb->pipe; | |
703 | int is_out = !usb_pipein(pipe); | |
704 | int type = usb_pipetype(pipe); | |
705 | int epnum = usb_pipeendpoint(pipe); | |
706 | struct isp116x_ep *ep = NULL; | |
707 | unsigned long flags; | |
708 | int i; | |
709 | int ret = 0; | |
710 | ||
711 | urb_dbg(urb, "Enqueue"); | |
712 | ||
713 | if (type == PIPE_ISOCHRONOUS) { | |
714 | ERR("Isochronous transfers not supported\n"); | |
715 | urb_dbg(urb, "Refused to enqueue"); | |
716 | return -ENXIO; | |
717 | } | |
718 | /* avoid all allocations within spinlocks: request or endpoint */ | |
719 | if (!hep->hcpriv) { | |
7b842b6e | 720 | ep = kzalloc(sizeof *ep, mem_flags); |
4808a1c0 OK |
721 | if (!ep) |
722 | return -ENOMEM; | |
723 | } | |
724 | ||
725 | spin_lock_irqsave(&isp116x->lock, flags); | |
726 | if (!HC_IS_RUNNING(hcd->state)) { | |
727 | ret = -ENODEV; | |
728 | goto fail; | |
729 | } | |
730 | ||
731 | if (hep->hcpriv) | |
732 | ep = hep->hcpriv; | |
733 | else { | |
734 | INIT_LIST_HEAD(&ep->schedule); | |
735 | ep->udev = usb_get_dev(udev); | |
736 | ep->epnum = epnum; | |
737 | ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out); | |
738 | usb_settoggle(udev, epnum, is_out, 0); | |
739 | ||
740 | if (type == PIPE_CONTROL) { | |
741 | ep->nextpid = USB_PID_SETUP; | |
742 | } else if (is_out) { | |
743 | ep->nextpid = USB_PID_OUT; | |
744 | } else { | |
745 | ep->nextpid = USB_PID_IN; | |
746 | } | |
747 | ||
748 | if (urb->interval) { | |
749 | /* | |
750 | With INT URBs submitted, the driver works with SOF | |
751 | interrupt enabled and ATL interrupt disabled. After | |
752 | the PTDs are written to fifo ram, the chip starts | |
753 | fifo processing and usb transfers after the next | |
754 | SOF and continues until the transfers are finished | |
755 | (succeeded or failed) or the frame ends. Therefore, | |
756 | the transfers occur only in every second frame, | |
757 | while fifo reading/writing and data processing | |
758 | occur in every other second frame. */ | |
759 | if (urb->interval < 2) | |
760 | urb->interval = 2; | |
761 | if (urb->interval > 2 * PERIODIC_SIZE) | |
762 | urb->interval = 2 * PERIODIC_SIZE; | |
763 | ep->period = urb->interval >> 1; | |
764 | ep->branch = PERIODIC_SIZE; | |
765 | ep->load = usb_calc_bus_time(udev->speed, | |
766 | !is_out, | |
767 | (type == PIPE_ISOCHRONOUS), | |
768 | usb_maxpacket(udev, pipe, | |
769 | is_out)) / | |
770 | 1000; | |
771 | } | |
772 | hep->hcpriv = ep; | |
773 | ep->hep = hep; | |
774 | } | |
775 | ||
776 | /* maybe put endpoint into schedule */ | |
777 | switch (type) { | |
778 | case PIPE_CONTROL: | |
779 | case PIPE_BULK: | |
780 | if (list_empty(&ep->schedule)) | |
781 | list_add_tail(&ep->schedule, &isp116x->async); | |
782 | break; | |
783 | case PIPE_INTERRUPT: | |
784 | urb->interval = ep->period; | |
785 | ep->length = min((int)ep->maxpacket, | |
786 | urb->transfer_buffer_length); | |
787 | ||
788 | /* urb submitted for already existing endpoint */ | |
789 | if (ep->branch < PERIODIC_SIZE) | |
790 | break; | |
791 | ||
792 | ret = ep->branch = balance(isp116x, ep->period, ep->load); | |
793 | if (ret < 0) | |
794 | goto fail; | |
795 | ret = 0; | |
796 | ||
797 | urb->start_frame = (isp116x->fmindex & (PERIODIC_SIZE - 1)) | |
798 | + ep->branch; | |
799 | ||
800 | /* sort each schedule branch by period (slow before fast) | |
801 | to share the faster parts of the tree without needing | |
802 | dummy/placeholder nodes */ | |
803 | DBG("schedule qh%d/%p branch %d\n", ep->period, ep, ep->branch); | |
804 | for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) { | |
805 | struct isp116x_ep **prev = &isp116x->periodic[i]; | |
806 | struct isp116x_ep *here = *prev; | |
807 | ||
808 | while (here && ep != here) { | |
809 | if (ep->period > here->period) | |
810 | break; | |
811 | prev = &here->next; | |
812 | here = *prev; | |
813 | } | |
814 | if (ep != here) { | |
815 | ep->next = here; | |
816 | *prev = ep; | |
817 | } | |
818 | isp116x->load[i] += ep->load; | |
819 | } | |
820 | hcd->self.bandwidth_allocated += ep->load / ep->period; | |
821 | ||
822 | /* switch over to SOFint */ | |
823 | if (!isp116x->periodic_count++) { | |
824 | isp116x->irqenb &= ~HCuPINT_ATL; | |
825 | isp116x->irqenb |= HCuPINT_SOF; | |
826 | isp116x_write_reg16(isp116x, HCuPINTENB, | |
827 | isp116x->irqenb); | |
828 | } | |
829 | } | |
830 | ||
831 | /* in case of unlink-during-submit */ | |
832 | spin_lock(&urb->lock); | |
833 | if (urb->status != -EINPROGRESS) { | |
834 | spin_unlock(&urb->lock); | |
835 | finish_request(isp116x, ep, urb, NULL); | |
836 | ret = 0; | |
837 | goto fail; | |
838 | } | |
839 | urb->hcpriv = hep; | |
840 | spin_unlock(&urb->lock); | |
841 | start_atl_transfers(isp116x); | |
842 | ||
843 | fail: | |
844 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
845 | return ret; | |
846 | } | |
847 | ||
848 | /* | |
849 | Dequeue URBs. | |
850 | */ | |
851 | static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) | |
852 | { | |
853 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
854 | struct usb_host_endpoint *hep; | |
855 | struct isp116x_ep *ep, *ep_act; | |
856 | unsigned long flags; | |
857 | ||
858 | spin_lock_irqsave(&isp116x->lock, flags); | |
859 | hep = urb->hcpriv; | |
860 | /* URB already unlinked (or never linked)? */ | |
861 | if (!hep) { | |
862 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
863 | return 0; | |
864 | } | |
865 | ep = hep->hcpriv; | |
866 | WARN_ON(hep != ep->hep); | |
867 | ||
868 | /* In front of queue? */ | |
869 | if (ep->hep->urb_list.next == &urb->urb_list) | |
870 | /* active? */ | |
871 | for (ep_act = isp116x->atl_active; ep_act; | |
872 | ep_act = ep_act->active) | |
873 | if (ep_act == ep) { | |
874 | VDBG("dequeue, urb %p active; wait for irq\n", | |
875 | urb); | |
876 | urb = NULL; | |
877 | break; | |
878 | } | |
879 | ||
880 | if (urb) | |
881 | finish_request(isp116x, ep, urb, NULL); | |
882 | ||
883 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
884 | return 0; | |
885 | } | |
886 | ||
887 | static void isp116x_endpoint_disable(struct usb_hcd *hcd, | |
888 | struct usb_host_endpoint *hep) | |
889 | { | |
890 | int i; | |
891 | struct isp116x_ep *ep = hep->hcpriv;; | |
892 | ||
893 | if (!ep) | |
894 | return; | |
895 | ||
896 | /* assume we'd just wait for the irq */ | |
897 | for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++) | |
898 | msleep(3); | |
899 | if (!list_empty(&hep->urb_list)) | |
900 | WARN("ep %p not empty?\n", ep); | |
901 | ||
902 | usb_put_dev(ep->udev); | |
903 | kfree(ep); | |
904 | hep->hcpriv = NULL; | |
905 | } | |
906 | ||
907 | static int isp116x_get_frame(struct usb_hcd *hcd) | |
908 | { | |
909 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
910 | u32 fmnum; | |
911 | unsigned long flags; | |
912 | ||
913 | spin_lock_irqsave(&isp116x->lock, flags); | |
914 | fmnum = isp116x_read_reg32(isp116x, HCFMNUM); | |
915 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
916 | return (int)fmnum; | |
917 | } | |
918 | ||
919 | /*----------------------------------------------------------------*/ | |
920 | ||
921 | /* | |
922 | Adapted from ohci-hub.c. Currently we don't support autosuspend. | |
923 | */ | |
924 | static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf) | |
925 | { | |
926 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
927 | int ports, i, changed = 0; | |
928 | ||
929 | if (!HC_IS_RUNNING(hcd->state)) | |
930 | return -ESHUTDOWN; | |
931 | ||
932 | ports = isp116x->rhdesca & RH_A_NDP; | |
933 | ||
934 | /* init status */ | |
935 | if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC)) | |
936 | buf[0] = changed = 1; | |
937 | else | |
938 | buf[0] = 0; | |
939 | ||
940 | for (i = 0; i < ports; i++) { | |
941 | u32 status = isp116x->rhport[i]; | |
942 | ||
943 | if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC | |
944 | | RH_PS_OCIC | RH_PS_PRSC)) { | |
945 | changed = 1; | |
946 | buf[0] |= 1 << (i + 1); | |
947 | continue; | |
948 | } | |
949 | } | |
950 | return changed; | |
951 | } | |
952 | ||
953 | static void isp116x_hub_descriptor(struct isp116x *isp116x, | |
954 | struct usb_hub_descriptor *desc) | |
955 | { | |
956 | u32 reg = isp116x->rhdesca; | |
957 | ||
958 | desc->bDescriptorType = 0x29; | |
959 | desc->bDescLength = 9; | |
960 | desc->bHubContrCurrent = 0; | |
961 | desc->bNbrPorts = (u8) (reg & 0x3); | |
962 | /* Power switching, device type, overcurrent. */ | |
963 | desc->wHubCharacteristics = | |
964 | (__force __u16) cpu_to_le16((u16) ((reg >> 8) & 0x1f)); | |
965 | desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); | |
966 | /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ | |
967 | desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; | |
968 | desc->bitmap[1] = ~0; | |
969 | } | |
970 | ||
971 | /* Perform reset of a given port. | |
972 | It would be great to just start the reset and let the | |
973 | USB core to clear the reset in due time. However, | |
974 | root hub ports should be reset for at least 50 ms, while | |
975 | our chip stays in reset for about 10 ms. I.e., we must | |
976 | repeatedly reset it ourself here. | |
977 | */ | |
978 | static inline void root_port_reset(struct isp116x *isp116x, unsigned port) | |
979 | { | |
980 | u32 tmp; | |
981 | unsigned long flags, t; | |
982 | ||
983 | /* Root hub reset should be 50 ms, but some devices | |
984 | want it even longer. */ | |
985 | t = jiffies + msecs_to_jiffies(100); | |
986 | ||
987 | while (time_before(jiffies, t)) { | |
988 | spin_lock_irqsave(&isp116x->lock, flags); | |
989 | /* spin until any current reset finishes */ | |
990 | for (;;) { | |
991 | tmp = isp116x_read_reg32(isp116x, port ? | |
992 | HCRHPORT2 : HCRHPORT1); | |
993 | if (!(tmp & RH_PS_PRS)) | |
994 | break; | |
995 | udelay(500); | |
996 | } | |
997 | /* Don't reset a disconnected port */ | |
998 | if (!(tmp & RH_PS_CCS)) { | |
999 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1000 | break; | |
1001 | } | |
1002 | /* Reset lasts 10ms (claims datasheet) */ | |
1003 | isp116x_write_reg32(isp116x, port ? HCRHPORT2 : | |
1004 | HCRHPORT1, (RH_PS_PRS)); | |
1005 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1006 | msleep(10); | |
1007 | } | |
1008 | } | |
1009 | ||
1010 | /* Adapted from ohci-hub.c */ | |
1011 | static int isp116x_hub_control(struct usb_hcd *hcd, | |
1012 | u16 typeReq, | |
1013 | u16 wValue, u16 wIndex, char *buf, u16 wLength) | |
1014 | { | |
1015 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1016 | int ret = 0; | |
1017 | unsigned long flags; | |
1018 | int ports = isp116x->rhdesca & RH_A_NDP; | |
1019 | u32 tmp = 0; | |
1020 | ||
1021 | switch (typeReq) { | |
1022 | case ClearHubFeature: | |
1023 | DBG("ClearHubFeature: "); | |
1024 | switch (wValue) { | |
1025 | case C_HUB_OVER_CURRENT: | |
1026 | DBG("C_HUB_OVER_CURRENT\n"); | |
1027 | spin_lock_irqsave(&isp116x->lock, flags); | |
1028 | isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC); | |
1029 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1030 | case C_HUB_LOCAL_POWER: | |
1031 | DBG("C_HUB_LOCAL_POWER\n"); | |
1032 | break; | |
1033 | default: | |
1034 | goto error; | |
1035 | } | |
1036 | break; | |
1037 | case SetHubFeature: | |
1038 | DBG("SetHubFeature: "); | |
1039 | switch (wValue) { | |
1040 | case C_HUB_OVER_CURRENT: | |
1041 | case C_HUB_LOCAL_POWER: | |
1042 | DBG("C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n"); | |
1043 | break; | |
1044 | default: | |
1045 | goto error; | |
1046 | } | |
1047 | break; | |
1048 | case GetHubDescriptor: | |
1049 | DBG("GetHubDescriptor\n"); | |
1050 | isp116x_hub_descriptor(isp116x, | |
1051 | (struct usb_hub_descriptor *)buf); | |
1052 | break; | |
1053 | case GetHubStatus: | |
1054 | DBG("GetHubStatus\n"); | |
17f8bb73 | 1055 | *(__le32 *) buf = 0; |
4808a1c0 OK |
1056 | break; |
1057 | case GetPortStatus: | |
1058 | DBG("GetPortStatus\n"); | |
1059 | if (!wIndex || wIndex > ports) | |
1060 | goto error; | |
1061 | tmp = isp116x->rhport[--wIndex]; | |
1062 | *(__le32 *) buf = cpu_to_le32(tmp); | |
1063 | DBG("GetPortStatus: port[%d] %08x\n", wIndex + 1, tmp); | |
1064 | break; | |
1065 | case ClearPortFeature: | |
1066 | DBG("ClearPortFeature: "); | |
1067 | if (!wIndex || wIndex > ports) | |
1068 | goto error; | |
1069 | wIndex--; | |
1070 | ||
1071 | switch (wValue) { | |
1072 | case USB_PORT_FEAT_ENABLE: | |
1073 | DBG("USB_PORT_FEAT_ENABLE\n"); | |
1074 | tmp = RH_PS_CCS; | |
1075 | break; | |
1076 | case USB_PORT_FEAT_C_ENABLE: | |
1077 | DBG("USB_PORT_FEAT_C_ENABLE\n"); | |
1078 | tmp = RH_PS_PESC; | |
1079 | break; | |
1080 | case USB_PORT_FEAT_SUSPEND: | |
1081 | DBG("USB_PORT_FEAT_SUSPEND\n"); | |
1082 | tmp = RH_PS_POCI; | |
1083 | break; | |
1084 | case USB_PORT_FEAT_C_SUSPEND: | |
1085 | DBG("USB_PORT_FEAT_C_SUSPEND\n"); | |
1086 | tmp = RH_PS_PSSC; | |
1087 | break; | |
1088 | case USB_PORT_FEAT_POWER: | |
1089 | DBG("USB_PORT_FEAT_POWER\n"); | |
1090 | tmp = RH_PS_LSDA; | |
1091 | break; | |
1092 | case USB_PORT_FEAT_C_CONNECTION: | |
1093 | DBG("USB_PORT_FEAT_C_CONNECTION\n"); | |
1094 | tmp = RH_PS_CSC; | |
1095 | break; | |
1096 | case USB_PORT_FEAT_C_OVER_CURRENT: | |
1097 | DBG("USB_PORT_FEAT_C_OVER_CURRENT\n"); | |
1098 | tmp = RH_PS_OCIC; | |
1099 | break; | |
1100 | case USB_PORT_FEAT_C_RESET: | |
1101 | DBG("USB_PORT_FEAT_C_RESET\n"); | |
1102 | tmp = RH_PS_PRSC; | |
1103 | break; | |
1104 | default: | |
1105 | goto error; | |
1106 | } | |
1107 | spin_lock_irqsave(&isp116x->lock, flags); | |
1108 | isp116x_write_reg32(isp116x, wIndex | |
1109 | ? HCRHPORT2 : HCRHPORT1, tmp); | |
1110 | isp116x->rhport[wIndex] = | |
1111 | isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1); | |
1112 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1113 | break; | |
1114 | case SetPortFeature: | |
1115 | DBG("SetPortFeature: "); | |
1116 | if (!wIndex || wIndex > ports) | |
1117 | goto error; | |
1118 | wIndex--; | |
1119 | switch (wValue) { | |
1120 | case USB_PORT_FEAT_SUSPEND: | |
1121 | DBG("USB_PORT_FEAT_SUSPEND\n"); | |
1122 | spin_lock_irqsave(&isp116x->lock, flags); | |
1123 | isp116x_write_reg32(isp116x, wIndex | |
1124 | ? HCRHPORT2 : HCRHPORT1, RH_PS_PSS); | |
1125 | break; | |
1126 | case USB_PORT_FEAT_POWER: | |
1127 | DBG("USB_PORT_FEAT_POWER\n"); | |
1128 | spin_lock_irqsave(&isp116x->lock, flags); | |
1129 | isp116x_write_reg32(isp116x, wIndex | |
1130 | ? HCRHPORT2 : HCRHPORT1, RH_PS_PPS); | |
1131 | break; | |
1132 | case USB_PORT_FEAT_RESET: | |
1133 | DBG("USB_PORT_FEAT_RESET\n"); | |
1134 | root_port_reset(isp116x, wIndex); | |
1135 | spin_lock_irqsave(&isp116x->lock, flags); | |
1136 | break; | |
1137 | default: | |
1138 | goto error; | |
1139 | } | |
1140 | isp116x->rhport[wIndex] = | |
1141 | isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1); | |
1142 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1143 | break; | |
1144 | ||
1145 | default: | |
1146 | error: | |
1147 | /* "protocol stall" on error */ | |
1148 | DBG("PROTOCOL STALL\n"); | |
1149 | ret = -EPIPE; | |
1150 | } | |
1151 | return ret; | |
1152 | } | |
1153 | ||
1154 | #ifdef CONFIG_PM | |
1155 | ||
1156 | static int isp116x_hub_suspend(struct usb_hcd *hcd) | |
1157 | { | |
1158 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1159 | unsigned long flags; | |
1160 | u32 val; | |
1161 | int ret = 0; | |
1162 | ||
1163 | spin_lock_irqsave(&isp116x->lock, flags); | |
1164 | ||
1165 | val = isp116x_read_reg32(isp116x, HCCONTROL); | |
1166 | switch (val & HCCONTROL_HCFS) { | |
1167 | case HCCONTROL_USB_OPER: | |
1168 | hcd->state = HC_STATE_QUIESCING; | |
1169 | val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); | |
1170 | val |= HCCONTROL_USB_SUSPEND; | |
1171 | if (hcd->remote_wakeup) | |
1172 | val |= HCCONTROL_RWE; | |
1173 | /* Wait for usb transfers to finish */ | |
1174 | mdelay(2); | |
1175 | isp116x_write_reg32(isp116x, HCCONTROL, val); | |
1176 | hcd->state = HC_STATE_SUSPENDED; | |
1177 | /* Wait for devices to suspend */ | |
1178 | mdelay(5); | |
1179 | case HCCONTROL_USB_SUSPEND: | |
1180 | break; | |
1181 | case HCCONTROL_USB_RESUME: | |
1182 | isp116x_write_reg32(isp116x, HCCONTROL, | |
1183 | (val & ~HCCONTROL_HCFS) | | |
1184 | HCCONTROL_USB_RESET); | |
1185 | case HCCONTROL_USB_RESET: | |
1186 | ret = -EBUSY; | |
1187 | break; | |
1188 | default: | |
1189 | ret = -EINVAL; | |
1190 | } | |
1191 | ||
1192 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1193 | return ret; | |
1194 | } | |
1195 | ||
1196 | static int isp116x_hub_resume(struct usb_hcd *hcd) | |
1197 | { | |
1198 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1199 | u32 val; | |
1200 | int ret = -EINPROGRESS; | |
1201 | ||
1202 | msleep(5); | |
1203 | spin_lock_irq(&isp116x->lock); | |
1204 | ||
1205 | val = isp116x_read_reg32(isp116x, HCCONTROL); | |
1206 | switch (val & HCCONTROL_HCFS) { | |
1207 | case HCCONTROL_USB_SUSPEND: | |
1208 | val &= ~HCCONTROL_HCFS; | |
1209 | val |= HCCONTROL_USB_RESUME; | |
1210 | isp116x_write_reg32(isp116x, HCCONTROL, val); | |
1211 | case HCCONTROL_USB_RESUME: | |
1212 | break; | |
1213 | case HCCONTROL_USB_OPER: | |
1214 | /* Without setting power_state here the | |
1215 | SUSPENDED state won't be removed from | |
1216 | sysfs/usbN/power.state as a response to remote | |
1217 | wakeup. Maybe in the future. */ | |
1218 | hcd->self.root_hub->dev.power.power_state = PMSG_ON; | |
1219 | ret = 0; | |
1220 | break; | |
1221 | default: | |
1222 | ret = -EBUSY; | |
1223 | } | |
1224 | ||
1225 | if (ret != -EINPROGRESS) { | |
1226 | spin_unlock_irq(&isp116x->lock); | |
1227 | return ret; | |
1228 | } | |
1229 | ||
1230 | val = isp116x->rhdesca & RH_A_NDP; | |
1231 | while (val--) { | |
1232 | u32 stat = | |
1233 | isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1); | |
1234 | /* force global, not selective, resume */ | |
1235 | if (!(stat & RH_PS_PSS)) | |
1236 | continue; | |
1237 | DBG("%s: Resuming port %d\n", __func__, val); | |
1238 | isp116x_write_reg32(isp116x, RH_PS_POCI, val | |
1239 | ? HCRHPORT2 : HCRHPORT1); | |
1240 | } | |
1241 | spin_unlock_irq(&isp116x->lock); | |
1242 | ||
1243 | hcd->state = HC_STATE_RESUMING; | |
1244 | mdelay(20); | |
1245 | ||
1246 | /* Go operational */ | |
1247 | spin_lock_irq(&isp116x->lock); | |
1248 | val = isp116x_read_reg32(isp116x, HCCONTROL); | |
1249 | isp116x_write_reg32(isp116x, HCCONTROL, | |
1250 | (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER); | |
1251 | spin_unlock_irq(&isp116x->lock); | |
1252 | /* see analogous comment above */ | |
1253 | hcd->self.root_hub->dev.power.power_state = PMSG_ON; | |
1254 | hcd->state = HC_STATE_RUNNING; | |
1255 | ||
1256 | return 0; | |
1257 | } | |
1258 | ||
1259 | static void isp116x_rh_resume(void *_hcd) | |
1260 | { | |
1261 | struct usb_hcd *hcd = _hcd; | |
1262 | ||
1263 | usb_resume_device(hcd->self.root_hub); | |
1264 | } | |
1265 | ||
1266 | #else | |
1267 | ||
1268 | #define isp116x_hub_suspend NULL | |
1269 | #define isp116x_hub_resume NULL | |
1270 | ||
1271 | static void isp116x_rh_resume(void *_hcd) | |
1272 | { | |
1273 | } | |
1274 | ||
1275 | #endif | |
1276 | ||
1277 | /*-----------------------------------------------------------------*/ | |
1278 | ||
1279 | #ifdef STUB_DEBUG_FILE | |
1280 | ||
1281 | static inline void create_debug_file(struct isp116x *isp116x) | |
1282 | { | |
1283 | } | |
1284 | ||
1285 | static inline void remove_debug_file(struct isp116x *isp116x) | |
1286 | { | |
1287 | } | |
1288 | ||
1289 | #else | |
1290 | ||
1291 | #include <linux/proc_fs.h> | |
1292 | #include <linux/seq_file.h> | |
1293 | ||
1294 | static void dump_irq(struct seq_file *s, char *label, u16 mask) | |
1295 | { | |
1296 | seq_printf(s, "%s %04x%s%s%s%s%s%s\n", label, mask, | |
1297 | mask & HCuPINT_CLKRDY ? " clkrdy" : "", | |
1298 | mask & HCuPINT_SUSP ? " susp" : "", | |
1299 | mask & HCuPINT_OPR ? " opr" : "", | |
1300 | mask & HCuPINT_AIIEOT ? " eot" : "", | |
1301 | mask & HCuPINT_ATL ? " atl" : "", | |
1302 | mask & HCuPINT_SOF ? " sof" : ""); | |
1303 | } | |
1304 | ||
1305 | static void dump_int(struct seq_file *s, char *label, u32 mask) | |
1306 | { | |
1307 | seq_printf(s, "%s %08x%s%s%s%s%s%s%s\n", label, mask, | |
1308 | mask & HCINT_MIE ? " MIE" : "", | |
1309 | mask & HCINT_RHSC ? " rhsc" : "", | |
1310 | mask & HCINT_FNO ? " fno" : "", | |
1311 | mask & HCINT_UE ? " ue" : "", | |
1312 | mask & HCINT_RD ? " rd" : "", | |
1313 | mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : ""); | |
1314 | } | |
1315 | ||
1316 | static int proc_isp116x_show(struct seq_file *s, void *unused) | |
1317 | { | |
1318 | struct isp116x *isp116x = s->private; | |
1319 | struct isp116x_ep *ep; | |
1320 | struct urb *urb; | |
1321 | unsigned i; | |
1322 | char *str; | |
1323 | ||
1324 | seq_printf(s, "%s\n%s version %s\n", | |
1325 | isp116x_to_hcd(isp116x)->product_desc, hcd_name, | |
1326 | DRIVER_VERSION); | |
1327 | ||
1328 | if (HC_IS_SUSPENDED(isp116x_to_hcd(isp116x)->state)) { | |
1329 | seq_printf(s, "HCD is suspended\n"); | |
1330 | return 0; | |
1331 | } | |
1332 | if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state)) { | |
1333 | seq_printf(s, "HCD not running\n"); | |
1334 | return 0; | |
1335 | } | |
1336 | ||
1337 | spin_lock_irq(&isp116x->lock); | |
1338 | ||
1339 | dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB)); | |
1340 | dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT)); | |
1341 | dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB)); | |
1342 | dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT)); | |
1343 | ||
1344 | list_for_each_entry(ep, &isp116x->async, schedule) { | |
1345 | ||
1346 | switch (ep->nextpid) { | |
1347 | case USB_PID_IN: | |
1348 | str = "in"; | |
1349 | break; | |
1350 | case USB_PID_OUT: | |
1351 | str = "out"; | |
1352 | break; | |
1353 | case USB_PID_SETUP: | |
1354 | str = "setup"; | |
1355 | break; | |
1356 | case USB_PID_ACK: | |
1357 | str = "status"; | |
1358 | break; | |
1359 | default: | |
1360 | str = "?"; | |
1361 | break; | |
1362 | }; | |
1363 | seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, | |
1364 | ep->epnum, str, ep->maxpacket); | |
1365 | list_for_each_entry(urb, &ep->hep->urb_list, urb_list) { | |
1366 | seq_printf(s, " urb%p, %d/%d\n", urb, | |
1367 | urb->actual_length, | |
1368 | urb->transfer_buffer_length); | |
1369 | } | |
1370 | } | |
1371 | if (!list_empty(&isp116x->async)) | |
1372 | seq_printf(s, "\n"); | |
1373 | ||
1374 | seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE); | |
1375 | ||
1376 | for (i = 0; i < PERIODIC_SIZE; i++) { | |
1377 | ep = isp116x->periodic[i]; | |
1378 | if (!ep) | |
1379 | continue; | |
1380 | seq_printf(s, "%2d [%3d]:\n", i, isp116x->load[i]); | |
1381 | ||
1382 | /* DUMB: prints shared entries multiple times */ | |
1383 | do { | |
1384 | seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n", | |
1385 | ep->period, ep, | |
1386 | (ep->udev->speed == | |
1387 | USB_SPEED_FULL) ? "" : "ls ", | |
1388 | ep->udev->devnum, ep->epnum, | |
1389 | (ep->epnum == | |
1390 | 0) ? "" : ((ep->nextpid == | |
1391 | USB_PID_IN) ? "in" : "out"), | |
1392 | ep->maxpacket); | |
1393 | ep = ep->next; | |
1394 | } while (ep); | |
1395 | } | |
1396 | spin_unlock_irq(&isp116x->lock); | |
1397 | seq_printf(s, "\n"); | |
1398 | ||
1399 | return 0; | |
1400 | } | |
1401 | ||
1402 | static int proc_isp116x_open(struct inode *inode, struct file *file) | |
1403 | { | |
1404 | return single_open(file, proc_isp116x_show, PDE(inode)->data); | |
1405 | } | |
1406 | ||
1407 | static struct file_operations proc_ops = { | |
1408 | .open = proc_isp116x_open, | |
1409 | .read = seq_read, | |
1410 | .llseek = seq_lseek, | |
1411 | .release = single_release, | |
1412 | }; | |
1413 | ||
1414 | /* expect just one isp116x per system */ | |
1415 | static const char proc_filename[] = "driver/isp116x"; | |
1416 | ||
1417 | static void create_debug_file(struct isp116x *isp116x) | |
1418 | { | |
1419 | struct proc_dir_entry *pde; | |
1420 | ||
1421 | pde = create_proc_entry(proc_filename, 0, NULL); | |
1422 | if (pde == NULL) | |
1423 | return; | |
1424 | ||
1425 | pde->proc_fops = &proc_ops; | |
1426 | pde->data = isp116x; | |
1427 | isp116x->pde = pde; | |
1428 | } | |
1429 | ||
1430 | static void remove_debug_file(struct isp116x *isp116x) | |
1431 | { | |
1432 | if (isp116x->pde) | |
1433 | remove_proc_entry(proc_filename, NULL); | |
1434 | } | |
1435 | ||
1436 | #endif | |
1437 | ||
1438 | /*-----------------------------------------------------------------*/ | |
1439 | ||
1440 | /* | |
1441 | Software reset - can be called from any contect. | |
1442 | */ | |
1443 | static int isp116x_sw_reset(struct isp116x *isp116x) | |
1444 | { | |
1445 | int retries = 15; | |
1446 | unsigned long flags; | |
1447 | int ret = 0; | |
1448 | ||
1449 | spin_lock_irqsave(&isp116x->lock, flags); | |
1450 | isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC); | |
1451 | isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR); | |
1452 | while (--retries) { | |
1453 | /* It usually resets within 1 ms */ | |
1454 | mdelay(1); | |
1455 | if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR)) | |
1456 | break; | |
1457 | } | |
1458 | if (!retries) { | |
1459 | ERR("Software reset timeout\n"); | |
1460 | ret = -ETIME; | |
1461 | } | |
1462 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1463 | return ret; | |
1464 | } | |
1465 | ||
4808a1c0 OK |
1466 | static int isp116x_reset(struct usb_hcd *hcd) |
1467 | { | |
1468 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1469 | unsigned long t; | |
1470 | u16 clkrdy = 0; | |
1471 | int ret = 0, timeout = 15 /* ms */ ; | |
1472 | ||
f8d23d30 | 1473 | ret = isp116x_sw_reset(isp116x); |
4808a1c0 OK |
1474 | if (ret) |
1475 | return ret; | |
1476 | ||
1477 | t = jiffies + msecs_to_jiffies(timeout); | |
1478 | while (time_before_eq(jiffies, t)) { | |
1479 | msleep(4); | |
1480 | spin_lock_irq(&isp116x->lock); | |
1481 | clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY; | |
1482 | spin_unlock_irq(&isp116x->lock); | |
1483 | if (clkrdy) | |
1484 | break; | |
1485 | } | |
1486 | if (!clkrdy) { | |
1487 | ERR("Clock not ready after 20ms\n"); | |
589a0083 OK |
1488 | /* After sw_reset the clock won't report to be ready, if |
1489 | H_WAKEUP pin is high. */ | |
f8d23d30 | 1490 | ERR("Please make sure that the H_WAKEUP pin is pulled low!\n"); |
4808a1c0 OK |
1491 | ret = -ENODEV; |
1492 | } | |
1493 | return ret; | |
1494 | } | |
1495 | ||
1496 | static void isp116x_stop(struct usb_hcd *hcd) | |
1497 | { | |
1498 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1499 | unsigned long flags; | |
1500 | u32 val; | |
1501 | ||
1502 | spin_lock_irqsave(&isp116x->lock, flags); | |
1503 | isp116x_write_reg16(isp116x, HCuPINTENB, 0); | |
1504 | ||
1505 | /* Switch off ports' power, some devices don't come up | |
1506 | after next 'insmod' without this */ | |
1507 | val = isp116x_read_reg32(isp116x, HCRHDESCA); | |
1508 | val &= ~(RH_A_NPS | RH_A_PSM); | |
1509 | isp116x_write_reg32(isp116x, HCRHDESCA, val); | |
1510 | isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS); | |
1511 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1512 | ||
f8d23d30 | 1513 | isp116x_sw_reset(isp116x); |
4808a1c0 OK |
1514 | } |
1515 | ||
1516 | /* | |
1517 | Configure the chip. The chip must be successfully reset by now. | |
1518 | */ | |
1519 | static int isp116x_start(struct usb_hcd *hcd) | |
1520 | { | |
1521 | struct isp116x *isp116x = hcd_to_isp116x(hcd); | |
1522 | struct isp116x_platform_data *board = isp116x->board; | |
4808a1c0 OK |
1523 | u32 val; |
1524 | unsigned long flags; | |
1525 | ||
1526 | spin_lock_irqsave(&isp116x->lock, flags); | |
1527 | ||
1528 | /* clear interrupt status and disable all interrupt sources */ | |
1529 | isp116x_write_reg16(isp116x, HCuPINT, 0xff); | |
1530 | isp116x_write_reg16(isp116x, HCuPINTENB, 0); | |
1531 | ||
1532 | val = isp116x_read_reg16(isp116x, HCCHIPID); | |
1533 | if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) { | |
1534 | ERR("Invalid chip ID %04x\n", val); | |
1535 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1536 | return -ENODEV; | |
1537 | } | |
1538 | ||
1539 | isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE); | |
1540 | isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE); | |
1541 | ||
1542 | /* ----- HW conf */ | |
1543 | val = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1); | |
1544 | if (board->sel15Kres) | |
1545 | val |= HCHWCFG_15KRSEL; | |
1546 | /* Remote wakeup won't work without working clock */ | |
d4d62861 | 1547 | if (board->remote_wakeup_enable) |
4808a1c0 OK |
1548 | val |= HCHWCFG_CLKNOTSTOP; |
1549 | if (board->oc_enable) | |
1550 | val |= HCHWCFG_ANALOG_OC; | |
1551 | if (board->int_act_high) | |
1552 | val |= HCHWCFG_INT_POL; | |
1553 | if (board->int_edge_triggered) | |
1554 | val |= HCHWCFG_INT_TRIGGER; | |
1555 | isp116x_write_reg16(isp116x, HCHWCFG, val); | |
1556 | ||
1557 | /* ----- Root hub conf */ | |
dc5bed09 | 1558 | val = (25 << 24) & RH_A_POTPGT; |
165c0f39 OK |
1559 | /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to |
1560 | be always set. Yet, instead, we request individual port | |
1561 | power switching. */ | |
1562 | val |= RH_A_PSM; | |
9d233d9f OK |
1563 | /* Report overcurrent per port */ |
1564 | val |= RH_A_OCPM; | |
4808a1c0 OK |
1565 | isp116x_write_reg32(isp116x, HCRHDESCA, val); |
1566 | isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA); | |
1567 | ||
1568 | val = RH_B_PPCM; | |
1569 | isp116x_write_reg32(isp116x, HCRHDESCB, val); | |
1570 | isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB); | |
1571 | ||
1572 | val = 0; | |
1573 | if (board->remote_wakeup_enable) { | |
1574 | hcd->can_wakeup = 1; | |
1575 | val |= RH_HS_DRWE; | |
1576 | } | |
1577 | isp116x_write_reg32(isp116x, HCRHSTATUS, val); | |
1578 | isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS); | |
1579 | ||
1580 | isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf); | |
4808a1c0 | 1581 | |
4808a1c0 OK |
1582 | hcd->state = HC_STATE_RUNNING; |
1583 | ||
4808a1c0 OK |
1584 | /* Set up interrupts */ |
1585 | isp116x->intenb = HCINT_MIE | HCINT_RHSC | HCINT_UE; | |
1586 | if (board->remote_wakeup_enable) | |
1587 | isp116x->intenb |= HCINT_RD; | |
1588 | isp116x->irqenb = HCuPINT_ATL | HCuPINT_OPR; /* | HCuPINT_SUSP; */ | |
1589 | isp116x_write_reg32(isp116x, HCINTENB, isp116x->intenb); | |
1590 | isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb); | |
1591 | ||
1592 | /* Go operational */ | |
1593 | val = HCCONTROL_USB_OPER; | |
4808a1c0 OK |
1594 | if (board->remote_wakeup_enable) |
1595 | val |= HCCONTROL_RWE; | |
1596 | isp116x_write_reg32(isp116x, HCCONTROL, val); | |
1597 | ||
1598 | /* Disable ports to avoid race in device enumeration */ | |
1599 | isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); | |
1600 | isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); | |
1601 | ||
1602 | isp116x_show_regs(isp116x); | |
1603 | spin_unlock_irqrestore(&isp116x->lock, flags); | |
1604 | return 0; | |
1605 | } | |
1606 | ||
1607 | /*-----------------------------------------------------------------*/ | |
1608 | ||
1609 | static struct hc_driver isp116x_hc_driver = { | |
1610 | .description = hcd_name, | |
1611 | .product_desc = "ISP116x Host Controller", | |
1612 | .hcd_priv_size = sizeof(struct isp116x), | |
1613 | ||
1614 | .irq = isp116x_irq, | |
1615 | .flags = HCD_USB11, | |
1616 | ||
1617 | .reset = isp116x_reset, | |
1618 | .start = isp116x_start, | |
1619 | .stop = isp116x_stop, | |
1620 | ||
1621 | .urb_enqueue = isp116x_urb_enqueue, | |
1622 | .urb_dequeue = isp116x_urb_dequeue, | |
1623 | .endpoint_disable = isp116x_endpoint_disable, | |
1624 | ||
1625 | .get_frame_number = isp116x_get_frame, | |
1626 | ||
1627 | .hub_status_data = isp116x_hub_status_data, | |
1628 | .hub_control = isp116x_hub_control, | |
1629 | .hub_suspend = isp116x_hub_suspend, | |
1630 | .hub_resume = isp116x_hub_resume, | |
1631 | }; | |
1632 | ||
1633 | /*----------------------------------------------------------------*/ | |
1634 | ||
1635 | static int __init_or_module isp116x_remove(struct device *dev) | |
1636 | { | |
1637 | struct usb_hcd *hcd = dev_get_drvdata(dev); | |
589a0083 | 1638 | struct isp116x *isp116x; |
4808a1c0 OK |
1639 | struct platform_device *pdev; |
1640 | struct resource *res; | |
1641 | ||
589a0083 OK |
1642 | if(!hcd) |
1643 | return 0; | |
1644 | isp116x = hcd_to_isp116x(hcd); | |
4808a1c0 OK |
1645 | pdev = container_of(dev, struct platform_device, dev); |
1646 | remove_debug_file(isp116x); | |
1647 | usb_remove_hcd(hcd); | |
1648 | ||
1649 | iounmap(isp116x->data_reg); | |
1650 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
1651 | release_mem_region(res->start, 2); | |
1652 | iounmap(isp116x->addr_reg); | |
1653 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1654 | release_mem_region(res->start, 2); | |
1655 | ||
1656 | usb_put_hcd(hcd); | |
1657 | return 0; | |
1658 | } | |
1659 | ||
1660 | #define resource_len(r) (((r)->end - (r)->start) + 1) | |
1661 | ||
1662 | static int __init isp116x_probe(struct device *dev) | |
1663 | { | |
1664 | struct usb_hcd *hcd; | |
1665 | struct isp116x *isp116x; | |
1666 | struct platform_device *pdev; | |
1667 | struct resource *addr, *data; | |
1668 | void __iomem *addr_reg; | |
1669 | void __iomem *data_reg; | |
1670 | int irq; | |
1671 | int ret = 0; | |
1672 | ||
1673 | pdev = container_of(dev, struct platform_device, dev); | |
1674 | if (pdev->num_resources < 3) { | |
1675 | ret = -ENODEV; | |
1676 | goto err1; | |
1677 | } | |
1678 | ||
1679 | data = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1680 | addr = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
1681 | irq = platform_get_irq(pdev, 0); | |
1682 | if (!addr || !data || irq < 0) { | |
1683 | ret = -ENODEV; | |
1684 | goto err1; | |
1685 | } | |
1686 | ||
1687 | if (dev->dma_mask) { | |
1688 | DBG("DMA not supported\n"); | |
1689 | ret = -EINVAL; | |
1690 | goto err1; | |
1691 | } | |
1692 | ||
1693 | if (!request_mem_region(addr->start, 2, hcd_name)) { | |
1694 | ret = -EBUSY; | |
1695 | goto err1; | |
1696 | } | |
1697 | addr_reg = ioremap(addr->start, resource_len(addr)); | |
1698 | if (addr_reg == NULL) { | |
1699 | ret = -ENOMEM; | |
1700 | goto err2; | |
1701 | } | |
1702 | if (!request_mem_region(data->start, 2, hcd_name)) { | |
1703 | ret = -EBUSY; | |
1704 | goto err3; | |
1705 | } | |
1706 | data_reg = ioremap(data->start, resource_len(data)); | |
1707 | if (data_reg == NULL) { | |
1708 | ret = -ENOMEM; | |
1709 | goto err4; | |
1710 | } | |
1711 | ||
1712 | /* allocate and initialize hcd */ | |
1713 | hcd = usb_create_hcd(&isp116x_hc_driver, dev, dev->bus_id); | |
1714 | if (!hcd) { | |
1715 | ret = -ENOMEM; | |
1716 | goto err5; | |
1717 | } | |
1718 | /* this rsrc_start is bogus */ | |
1719 | hcd->rsrc_start = addr->start; | |
1720 | isp116x = hcd_to_isp116x(hcd); | |
1721 | isp116x->data_reg = data_reg; | |
1722 | isp116x->addr_reg = addr_reg; | |
1723 | spin_lock_init(&isp116x->lock); | |
1724 | INIT_LIST_HEAD(&isp116x->async); | |
1725 | INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd); | |
1726 | isp116x->board = dev->platform_data; | |
1727 | ||
1728 | if (!isp116x->board) { | |
1729 | ERR("Platform data structure not initialized\n"); | |
1730 | ret = -ENODEV; | |
1731 | goto err6; | |
1732 | } | |
1733 | if (isp116x_check_platform_delay(isp116x)) { | |
1734 | ERR("USE_PLATFORM_DELAY defined, but delay function not " | |
1735 | "implemented.\n"); | |
1736 | ERR("See comments in drivers/usb/host/isp116x-hcd.c\n"); | |
1737 | ret = -ENODEV; | |
1738 | goto err6; | |
1739 | } | |
1740 | ||
1741 | ret = usb_add_hcd(hcd, irq, SA_INTERRUPT); | |
1742 | if (ret != 0) | |
1743 | goto err6; | |
1744 | ||
1745 | create_debug_file(isp116x); | |
1746 | return 0; | |
1747 | ||
1748 | err6: | |
1749 | usb_put_hcd(hcd); | |
1750 | err5: | |
1751 | iounmap(data_reg); | |
1752 | err4: | |
1753 | release_mem_region(data->start, 2); | |
1754 | err3: | |
1755 | iounmap(addr_reg); | |
1756 | err2: | |
1757 | release_mem_region(addr->start, 2); | |
1758 | err1: | |
1759 | ERR("init error, %d\n", ret); | |
1760 | return ret; | |
1761 | } | |
1762 | ||
1763 | #ifdef CONFIG_PM | |
1764 | /* | |
1765 | Suspend of platform device | |
1766 | */ | |
1767 | static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) | |
1768 | { | |
1769 | int ret = 0; | |
1770 | struct usb_hcd *hcd = dev_get_drvdata(dev); | |
1771 | ||
1772 | VDBG("%s: state %x, phase %x\n", __func__, state, phase); | |
1773 | ||
1774 | if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN) | |
1775 | return 0; | |
1776 | ||
1777 | ret = usb_suspend_device(hcd->self.root_hub, state); | |
1778 | if (!ret) { | |
1779 | dev->power.power_state = state; | |
17f8bb73 | 1780 | INFO("%s suspended\n", hcd_name); |
4808a1c0 | 1781 | } else |
17f8bb73 | 1782 | ERR("%s suspend failed\n", hcd_name); |
4808a1c0 OK |
1783 | |
1784 | return ret; | |
1785 | } | |
1786 | ||
1787 | /* | |
1788 | Resume platform device | |
1789 | */ | |
1790 | static int isp116x_resume(struct device *dev, u32 phase) | |
1791 | { | |
1792 | int ret = 0; | |
1793 | struct usb_hcd *hcd = dev_get_drvdata(dev); | |
1794 | ||
1795 | VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state, | |
1796 | phase); | |
1797 | if (phase != RESUME_POWER_ON) | |
1798 | return 0; | |
1799 | ||
1800 | ret = usb_resume_device(hcd->self.root_hub); | |
1801 | if (!ret) { | |
1802 | dev->power.power_state = PMSG_ON; | |
1803 | VDBG("%s resumed\n", (char *)hcd_name); | |
1804 | } | |
1805 | return ret; | |
1806 | } | |
1807 | ||
1808 | #else | |
1809 | ||
1810 | #define isp116x_suspend NULL | |
1811 | #define isp116x_resume NULL | |
1812 | ||
1813 | #endif | |
1814 | ||
1815 | static struct device_driver isp116x_driver = { | |
1816 | .name = (char *)hcd_name, | |
1817 | .bus = &platform_bus_type, | |
1818 | .probe = isp116x_probe, | |
1819 | .remove = isp116x_remove, | |
1820 | .suspend = isp116x_suspend, | |
1821 | .resume = isp116x_resume, | |
1822 | }; | |
1823 | ||
1824 | /*-----------------------------------------------------------------*/ | |
1825 | ||
1826 | static int __init isp116x_init(void) | |
1827 | { | |
1828 | if (usb_disabled()) | |
1829 | return -ENODEV; | |
1830 | ||
1831 | INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION); | |
1832 | return driver_register(&isp116x_driver); | |
1833 | } | |
1834 | ||
1835 | module_init(isp116x_init); | |
1836 | ||
1837 | static void __exit isp116x_cleanup(void) | |
1838 | { | |
1839 | driver_unregister(&isp116x_driver); | |
1840 | } | |
1841 | ||
1842 | module_exit(isp116x_cleanup); |