[deliverable/linux.git] / drivers / usb / host / pci-quirks.c

/*
 * This file contains code to reset and initialize USB host controllers.
 * Some of it includes work-arounds for PCI hardware and BIOS quirks.
 * It may need to run early during booting -- before USB would normally
 * initialize -- to ensure that Linux doesn't use any legacy modes.
 *
 *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
 *  (and others)
 */

#include <linux/config.h>
#ifdef CONFIG_USB_DEBUG
#define DEBUG
#else
#undef DEBUG
#endif

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/acpi.h>


#define UHCI_USBLEGSUP		0xc0		/* legacy support */
#define UHCI_USBCMD		0		/* command register */
#define UHCI_USBINTR		4		/* interrupt register */
#define UHCI_USBLEGSUP_RWC	0x8f00		/* the R/WC bits */
#define UHCI_USBLEGSUP_RO	0x5040		/* R/O and reserved bits */
#define UHCI_USBCMD_RUN		0x0001		/* RUN/STOP bit */
#define UHCI_USBCMD_HCRESET	0x0002		/* Host Controller reset */
#define UHCI_USBCMD_EGSM	0x0008		/* Global Suspend Mode */
#define UHCI_USBCMD_CONFIGURE	0x0040		/* Config Flag */
#define UHCI_USBINTR_RESUME	0x0002		/* Resume interrupt enable */

#define OHCI_CONTROL		0x04
#define OHCI_CMDSTATUS		0x08
#define OHCI_INTRSTATUS		0x0c
#define OHCI_INTRENABLE		0x10
#define OHCI_INTRDISABLE	0x14
#define OHCI_OCR		(1 << 3)	/* ownership change request */
#define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
#define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
#define OHCI_INTR_OC		(1 << 30)	/* ownership change */

#define EHCI_HCC_PARAMS		0x08		/* extended capabilities */
#define EHCI_USBCMD		0		/* command register */
#define EHCI_USBCMD_RUN		(1 << 0)	/* RUN/STOP bit */
#define EHCI_USBSTS		4		/* status register */
#define EHCI_USBSTS_HALTED	(1 << 12)	/* HCHalted bit */
#define EHCI_USBINTR		8		/* interrupt register */
#define EHCI_USBLEGSUP		0		/* legacy support register */
#define EHCI_USBLEGSUP_BIOS	(1 << 16)	/* BIOS semaphore */
#define EHCI_USBLEGSUP_OS	(1 << 24)	/* OS semaphore */
#define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */


/*
 * Make sure the controller is completely inactive, unable to
 * generate interrupts or do DMA.
 */
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
{
	/* Turn off PIRQ enable and SMI enable.  (This also turns off the
	 * BIOS's USB Legacy Support.)  Turn off all the R/WC bits too.
	 */
	pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);

	/* Reset the HC - this will force us to get a
	 * new notification of any already connected
	 * ports due to the virtual disconnect that it
	 * implies.
	 */
	outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
	mb();
	udelay(5);
	if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
		dev_warn(&pdev->dev, "HCRESET not completed yet!\n");

	/* Just to be safe, disable interrupt requests and
	 * make sure the controller is stopped.
	 */
	outw(0, base + UHCI_USBINTR);
	outw(0, base + UHCI_USBCMD);
}
EXPORT_SYMBOL_GPL(uhci_reset_hc);

/*
 * Initialize a controller that was newly discovered or has just been
 * resumed.  In either case we can't be sure of its previous state.
 *
 * Returns: 1 if the controller was reset, 0 otherwise.
 */
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
{
	u16 legsup;
	unsigned int cmd, intr;

	/*
	 * When restarting a suspended controller, we expect all the
	 * settings to be the same as we left them:
	 *
	 *	PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
	 *	Controller is stopped and configured with EGSM set;
	 *	No interrupts enabled except possibly Resume Detect.
	 *
	 * If any of these conditions are violated we do a complete reset.
	 */
	pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
	if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
		dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
				__FUNCTION__, legsup);
		goto reset_needed;
	}

	cmd = inw(base + UHCI_USBCMD);
	if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
			!(cmd & UHCI_USBCMD_EGSM)) {
		dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
				__FUNCTION__, cmd);
		goto reset_needed;
	}

	intr = inw(base + UHCI_USBINTR);
	if (intr & (~UHCI_USBINTR_RESUME)) {
		dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
				__FUNCTION__, intr);
		goto reset_needed;
	}
	return 0;

reset_needed:
	dev_dbg(&pdev->dev, "Performing full reset\n");
	uhci_reset_hc(pdev, base);
	return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);

static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
	unsigned long base = 0;
	int i;

	for (i = 0; i < PCI_ROM_RESOURCE; i++)
		if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
			base = pci_resource_start(pdev, i);
			break;
		}

	if (base)
		uhci_check_and_reset_hc(pdev, base);
}

static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
	void __iomem *base;
	int wait_time;
	u32 control;

	base = ioremap_nocache(pci_resource_start(pdev, 0),
				     pci_resource_len(pdev, 0));
	if (base == NULL) return;

/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
#ifndef __hppa__
	control = readl(base + OHCI_CONTROL);
	if (control & OHCI_CTRL_IR) {
		wait_time = 500; /* arbitrary; 5 seconds */
		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
		while (wait_time > 0 &&
				readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
			wait_time -= 10;
			msleep(10);
		}
		if (wait_time <= 0)
			printk(KERN_WARNING "%s %s: early BIOS handoff "
					"failed (BIOS bug ?)\n",
					pdev->dev.bus_id, "OHCI");

		/* reset controller, preserving RWC */
		writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
	}
#endif

	/*
	 * disable interrupts
	 */
	writel(~(u32)0, base + OHCI_INTRDISABLE);
	writel(~(u32)0, base + OHCI_INTRSTATUS);

	iounmap(base);
}

static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
{
	int wait_time, delta;
	void __iomem *base, *op_reg_base;
	u32 hcc_params, val, temp;
	u8 cap_length;

	base = ioremap_nocache(pci_resource_start(pdev, 0),
				pci_resource_len(pdev, 0));
	if (base == NULL) return;

	cap_length = readb(base);
	op_reg_base = base + cap_length;
	hcc_params = readl(base + EHCI_HCC_PARAMS);
	hcc_params = (hcc_params >> 8) & 0xff;
	if (hcc_params) {
		pci_read_config_dword(pdev,
					hcc_params + EHCI_USBLEGSUP,
					&val);
		if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
			/*
			 * Ok, BIOS is in smm mode, try to hand off...
			 */
			pci_read_config_dword(pdev,
						hcc_params + EHCI_USBLEGCTLSTS,
						&temp);
			pci_write_config_dword(pdev,
						hcc_params + EHCI_USBLEGCTLSTS,
						temp | EHCI_USBLEGCTLSTS_SOOE);
			val |= EHCI_USBLEGSUP_OS;
			pci_write_config_dword(pdev,
						hcc_params + EHCI_USBLEGSUP,
						val);

			wait_time = 500;
			do {
				msleep(10);
				wait_time -= 10;
				pci_read_config_dword(pdev,
						hcc_params + EHCI_USBLEGSUP,
						&val);
			} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
			if (!wait_time) {
				/*
				 * well, possibly buggy BIOS...
				 */
				printk(KERN_WARNING "%s %s: early BIOS handoff "
						"failed (BIOS bug ?)\n",
					pdev->dev.bus_id, "EHCI");
				pci_write_config_dword(pdev,
						hcc_params + EHCI_USBLEGSUP,
						EHCI_USBLEGSUP_OS);
				pci_write_config_dword(pdev,
						hcc_params + EHCI_USBLEGCTLSTS,
						0);
			}
		}
	}

	/*
	 * halt EHCI & disable its interrupts in any case
	 */
	val = readl(op_reg_base + EHCI_USBSTS);
	if ((val & EHCI_USBSTS_HALTED) == 0) {
		val = readl(op_reg_base + EHCI_USBCMD);
		val &= ~EHCI_USBCMD_RUN;
		writel(val, op_reg_base + EHCI_USBCMD);

		wait_time = 2000;
		delta = 100;
		do {
			writel(0x3f, op_reg_base + EHCI_USBSTS);
			udelay(delta);
			wait_time -= delta;
			val = readl(op_reg_base + EHCI_USBSTS);
			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
				break;
			}
		} while (wait_time > 0);
	}
	writel(0, op_reg_base + EHCI_USBINTR);
	writel(0x3f, op_reg_base + EHCI_USBSTS);

	iounmap(base);

	return;
}


static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
{
	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
		quirk_usb_handoff_uhci(pdev);
	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
		quirk_usb_handoff_ohci(pdev);
	else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
		quirk_usb_disable_ehci(pdev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
Commit	Line	Data
7586269c DB	1	/*
	2	* This file contains code to reset and initialize USB host controllers.
	3	* Some of it includes work-arounds for PCI hardware and BIOS quirks.
	4	* It may need to run early during booting -- before USB would normally
	5	* initialize -- to ensure that Linux doesn't use any legacy modes.
	6	*
	7	* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
	8	* (and others)
	9	*/
	10
	11	#include <linux/config.h>
bb200f6e AS	12	#ifdef CONFIG_USB_DEBUG
	13	#define DEBUG
	14	#else
	15	#undef DEBUG
	16	#endif
	17
7586269c DB	18	#include <linux/types.h>
	19	#include <linux/kernel.h>
	20	#include <linux/pci.h>
	21	#include <linux/init.h>
	22	#include <linux/delay.h>
	23	#include <linux/acpi.h>
	24
	25
7586269c DB	26	#define UHCI_USBLEGSUP 0xc0 /* legacy support */
7586269c DB	27	#define UHCI_USBCMD 0 /* command register */
7586269c	28	#define UHCI_USBINTR 4 /* interrupt register */
bb200f6e AS	29	#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
	30	#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
	31	#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
	32	#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
	33	#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
	34	#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
	35	#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
7586269c DB	36
	37	#define OHCI_CONTROL 0x04
	38	#define OHCI_CMDSTATUS 0x08
	39	#define OHCI_INTRSTATUS 0x0c
	40	#define OHCI_INTRENABLE 0x10
	41	#define OHCI_INTRDISABLE 0x14
	42	#define OHCI_OCR (1 << 3) /* ownership change request */
f2cb36c1	43	#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
7586269c DB	44	#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
	45	#define OHCI_INTR_OC (1 << 30) /* ownership change */
	46
	47	#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
	48	#define EHCI_USBCMD 0 /* command register */
	49	#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
	50	#define EHCI_USBSTS 4 /* status register */
	51	#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
	52	#define EHCI_USBINTR 8 /* interrupt register */
	53	#define EHCI_USBLEGSUP 0 /* legacy support register */
	54	#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
	55	#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
	56	#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
	57	#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
	58
7586269c	59
bb200f6e AS	60	/*
	61	* Make sure the controller is completely inactive, unable to
	62	* generate interrupts or do DMA.
	63	*/
	64	void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
	65	{
	66	/* Turn off PIRQ enable and SMI enable. (This also turns off the
	67	* BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
	68	*/
	69	pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
	70
	71	/* Reset the HC - this will force us to get a
	72	* new notification of any already connected
	73	* ports due to the virtual disconnect that it
	74	* implies.
	75	*/
	76	outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
	77	mb();
	78	udelay(5);
	79	if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
	80	dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
	81
	82	/* Just to be safe, disable interrupt requests and
	83	* make sure the controller is stopped.
	84	*/
	85	outw(0, base + UHCI_USBINTR);
	86	outw(0, base + UHCI_USBCMD);
	87	}
	88	EXPORT_SYMBOL_GPL(uhci_reset_hc);
	89
	90	/*
	91	* Initialize a controller that was newly discovered or has just been
	92	* resumed. In either case we can't be sure of its previous state.
	93	*
	94	* Returns: 1 if the controller was reset, 0 otherwise.
	95	*/
	96	int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
	97	{
	98	u16 legsup;
	99	unsigned int cmd, intr;
	100
	101	/*
	102	* When restarting a suspended controller, we expect all the
	103	* settings to be the same as we left them:
	104	*
	105	* PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
	106	* Controller is stopped and configured with EGSM set;
	107	* No interrupts enabled except possibly Resume Detect.
	108	*
	109	* If any of these conditions are violated we do a complete reset.
	110	*/
	111	pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
	112	if (legsup & ~(UHCI_USBLEGSUP_RO \| UHCI_USBLEGSUP_RWC)) {
	113	dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
	114	__FUNCTION__, legsup);
	115	goto reset_needed;
	116	}
	117
	118	cmd = inw(base + UHCI_USBCMD);
	119	if ((cmd & UHCI_USBCMD_RUN) \|\| !(cmd & UHCI_USBCMD_CONFIGURE) \|\|
	120	!(cmd & UHCI_USBCMD_EGSM)) {
	121	dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
	122	__FUNCTION__, cmd);
	123	goto reset_needed;
124	}
125
126	intr = inw(base + UHCI_USBINTR);
127	if (intr & (~UHCI_USBINTR_RESUME)) {
128	dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
129	__FUNCTION__, intr);
130	goto reset_needed;
131	}
132	return 0;
133
134	reset_needed:
135	dev_dbg(&pdev->dev, "Performing full reset\n");
136	uhci_reset_hc(pdev, base);
137	return 1;
138	}
139	EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
140
7586269c DB	141	static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
	142	{
	143	unsigned long base = 0;
7586269c DB	144	int i;
	145
	146	for (i = 0; i < PCI_ROM_RESOURCE; i++)
	147	if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
	148	base = pci_resource_start(pdev, i);
	149	break;
	150	}
	151
bb200f6e AS	152	if (base)
bb200f6e AS	153	uhci_check_and_reset_hc(pdev, base);
7586269c DB	154	}
	155
	156	static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
	157	{
	158	void __iomem *base;
	159	int wait_time;
f2cb36c1	160	u32 control;
7586269c DB	161
	162	base = ioremap_nocache(pci_resource_start(pdev, 0),
	163	pci_resource_len(pdev, 0));
	164	if (base == NULL) return;
	165
f2cb36c1 DB	166	/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
	167	#ifndef __hppa__
	168	control = readl(base + OHCI_CONTROL);
	169	if (control & OHCI_CTRL_IR) {
	170	wait_time = 500; /* arbitrary; 5 seconds */
7586269c DB	171	writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
	172	writel(OHCI_OCR, base + OHCI_CMDSTATUS);
	173	while (wait_time > 0 &&
	174	readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
	175	wait_time -= 10;
	176	msleep(10);
	177	}
f2cb36c1 DB	178	if (wait_time <= 0)
	179	printk(KERN_WARNING "%s %s: early BIOS handoff "
	180	"failed (BIOS bug ?)\n",
	181	pdev->dev.bus_id, "OHCI");
	182
	183	/* reset controller, preserving RWC */
	184	writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
7586269c	185	}
f2cb36c1	186	#endif
7586269c DB	187
	188	/*
	189	* disable interrupts
	190	*/
	191	writel(~(u32)0, base + OHCI_INTRDISABLE);
	192	writel(~(u32)0, base + OHCI_INTRSTATUS);
	193
	194	iounmap(base);
	195	}
	196
	197	static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
	198	{
	199	int wait_time, delta;
	200	void __iomem base, op_reg_base;
	201	u32 hcc_params, val, temp;
	202	u8 cap_length;
	203
	204	base = ioremap_nocache(pci_resource_start(pdev, 0),
	205	pci_resource_len(pdev, 0));
	206	if (base == NULL) return;
	207
	208	cap_length = readb(base);
	209	op_reg_base = base + cap_length;
	210	hcc_params = readl(base + EHCI_HCC_PARAMS);
	211	hcc_params = (hcc_params >> 8) & 0xff;
	212	if (hcc_params) {
	213	pci_read_config_dword(pdev,
	214	hcc_params + EHCI_USBLEGSUP,
	215	&val);
	216	if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
	217	/*
	218	* Ok, BIOS is in smm mode, try to hand off...
	219	*/
	220	pci_read_config_dword(pdev,
	221	hcc_params + EHCI_USBLEGCTLSTS,
	222	&temp);
	223	pci_write_config_dword(pdev,
	224	hcc_params + EHCI_USBLEGCTLSTS,
	225	temp \| EHCI_USBLEGCTLSTS_SOOE);
	226	val \|= EHCI_USBLEGSUP_OS;
	227	pci_write_config_dword(pdev,
	228	hcc_params + EHCI_USBLEGSUP,
	229	val);
	230
	231	wait_time = 500;
	232	do {
	233	msleep(10);
	234	wait_time -= 10;
	235	pci_read_config_dword(pdev,
	236	hcc_params + EHCI_USBLEGSUP,
	237	&val);
	238	} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
	239	if (!wait_time) {
	240	/*
	241	* well, possibly buggy BIOS...
	242	*/
f2cb36c1 DB	243	printk(KERN_WARNING "%s %s: early BIOS handoff "
	244	"failed (BIOS bug ?)\n",
	245	pdev->dev.bus_id, "EHCI");
7586269c DB	246	pci_write_config_dword(pdev,
	247	hcc_params + EHCI_USBLEGSUP,
	248	EHCI_USBLEGSUP_OS);
	249	pci_write_config_dword(pdev,
	250	hcc_params + EHCI_USBLEGCTLSTS,
	251	0);
	252	}
	253	}
	254	}
	255
	256	/*
	257	* halt EHCI & disable its interrupts in any case
	258	*/
	259	val = readl(op_reg_base + EHCI_USBSTS);
	260	if ((val & EHCI_USBSTS_HALTED) == 0) {
	261	val = readl(op_reg_base + EHCI_USBCMD);
	262	val &= ~EHCI_USBCMD_RUN;
	263	writel(val, op_reg_base + EHCI_USBCMD);
	264
	265	wait_time = 2000;
	266	delta = 100;
	267	do {
	268	writel(0x3f, op_reg_base + EHCI_USBSTS);
	269	udelay(delta);
	270	wait_time -= delta;
	271	val = readl(op_reg_base + EHCI_USBSTS);
	272	if ((val == ~(u32)0) \|\| (val & EHCI_USBSTS_HALTED)) {
	273	break;
	274	}
	275	} while (wait_time > 0);
	276	}
	277	writel(0, op_reg_base + EHCI_USBINTR);
	278	writel(0x3f, op_reg_base + EHCI_USBSTS);
	279
	280	iounmap(base);
	281
	282	return;
	283	}
	284
	285
	286
	287	static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
	288	{
478a3bab	289	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
7586269c	290	quirk_usb_handoff_uhci(pdev);
478a3bab	291	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
7586269c	292	quirk_usb_handoff_ohci(pdev);
478a3bab	293	else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
7586269c	294	quirk_usb_disable_ehci(pdev);
7586269c DB	295	}
7586269c DB	296	DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);