USB: xhci: fix OS want to own HC
[deliverable/linux.git] / drivers / usb / host / pci-quirks.c
CommitLineData
7586269c
DB
1/*
2 * This file contains code to reset and initialize USB host controllers.
3 * Some of it includes work-arounds for PCI hardware and BIOS quirks.
4 * It may need to run early during booting -- before USB would normally
5 * initialize -- to ensure that Linux doesn't use any legacy modes.
6 *
7 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
8 * (and others)
9 */
10
7586269c
DB
11#include <linux/types.h>
12#include <linux/kernel.h>
13#include <linux/pci.h>
14#include <linux/init.h>
15#include <linux/delay.h>
16#include <linux/acpi.h>
3610ea53 17#include <linux/dmi.h>
75e2df60 18#include "pci-quirks.h"
66d4eadd 19#include "xhci-ext-caps.h"
7586269c
DB
20
21
7586269c
DB
22#define UHCI_USBLEGSUP 0xc0 /* legacy support */
23#define UHCI_USBCMD 0 /* command register */
7586269c 24#define UHCI_USBINTR 4 /* interrupt register */
bb200f6e
AS
25#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
26#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
27#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
28#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
29#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
30#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
31#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
7586269c
DB
32
33#define OHCI_CONTROL 0x04
34#define OHCI_CMDSTATUS 0x08
35#define OHCI_INTRSTATUS 0x0c
36#define OHCI_INTRENABLE 0x10
37#define OHCI_INTRDISABLE 0x14
6ea12a04
AS
38#define OHCI_FMINTERVAL 0x34
39#define OHCI_HCR (1 << 0) /* host controller reset */
7586269c 40#define OHCI_OCR (1 << 3) /* ownership change request */
f2cb36c1 41#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
7586269c
DB
42#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
43#define OHCI_INTR_OC (1 << 30) /* ownership change */
44
45#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
46#define EHCI_USBCMD 0 /* command register */
47#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
48#define EHCI_USBSTS 4 /* status register */
49#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
50#define EHCI_USBINTR 8 /* interrupt register */
4fe5354f 51#define EHCI_CONFIGFLAG 0x40 /* configured flag register */
7586269c
DB
52#define EHCI_USBLEGSUP 0 /* legacy support register */
53#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
54#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
55#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
56#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
57
ad93562b
AX
58/* AMD quirk use */
59#define AB_REG_BAR_LOW 0xe0
60#define AB_REG_BAR_HIGH 0xe1
61#define AB_REG_BAR_SB700 0xf0
62#define AB_INDX(addr) ((addr) + 0x00)
63#define AB_DATA(addr) ((addr) + 0x04)
64#define AX_INDXC 0x30
65#define AX_DATAC 0x34
66
67#define NB_PCIE_INDX_ADDR 0xe0
68#define NB_PCIE_INDX_DATA 0xe4
69#define PCIE_P_CNTL 0x10040
70#define BIF_NB 0x10002
71#define NB_PIF0_PWRDOWN_0 0x01100012
72#define NB_PIF0_PWRDOWN_1 0x01100013
73
69e848c2
SS
74#define USB_INTEL_XUSB2PR 0xD0
75#define USB_INTEL_USB3_PSSEN 0xD8
76
ad93562b
AX
77static struct amd_chipset_info {
78 struct pci_dev *nb_dev;
79 struct pci_dev *smbus_dev;
80 int nb_type;
81 int sb_type;
82 int isoc_reqs;
83 int probe_count;
84 int probe_result;
85} amd_chipset;
86
87static DEFINE_SPINLOCK(amd_lock);
88
89int usb_amd_find_chipset_info(void)
90{
91 u8 rev = 0;
92 unsigned long flags;
9ab7927b
JR
93 struct amd_chipset_info info;
94 int ret;
ad93562b
AX
95
96 spin_lock_irqsave(&amd_lock, flags);
97
ad93562b 98 /* probe only once */
9ab7927b
JR
99 if (amd_chipset.probe_count > 0) {
100 amd_chipset.probe_count++;
ad93562b
AX
101 spin_unlock_irqrestore(&amd_lock, flags);
102 return amd_chipset.probe_result;
103 }
9ab7927b
JR
104 memset(&info, 0, sizeof(info));
105 spin_unlock_irqrestore(&amd_lock, flags);
ad93562b 106
9ab7927b
JR
107 info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
108 if (info.smbus_dev) {
109 rev = info.smbus_dev->revision;
ad93562b 110 if (rev >= 0x40)
9ab7927b 111 info.sb_type = 1;
ad93562b 112 else if (rev >= 0x30 && rev <= 0x3b)
9ab7927b 113 info.sb_type = 3;
ad93562b 114 } else {
9ab7927b
JR
115 info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
116 0x780b, NULL);
117 if (!info.smbus_dev) {
118 ret = 0;
119 goto commit;
ad93562b 120 }
9ab7927b
JR
121
122 rev = info.smbus_dev->revision;
ad93562b 123 if (rev >= 0x11 && rev <= 0x18)
9ab7927b 124 info.sb_type = 2;
ad93562b
AX
125 }
126
9ab7927b
JR
127 if (info.sb_type == 0) {
128 if (info.smbus_dev) {
129 pci_dev_put(info.smbus_dev);
130 info.smbus_dev = NULL;
ad93562b 131 }
9ab7927b
JR
132 ret = 0;
133 goto commit;
ad93562b
AX
134 }
135
9ab7927b
JR
136 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
137 if (info.nb_dev) {
138 info.nb_type = 1;
ad93562b 139 } else {
9ab7927b
JR
140 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
141 if (info.nb_dev) {
142 info.nb_type = 2;
143 } else {
144 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
145 0x9600, NULL);
146 if (info.nb_dev)
147 info.nb_type = 3;
ad93562b
AX
148 }
149 }
150
9ab7927b 151 ret = info.probe_result = 1;
ad93562b
AX
152 printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
153
9ab7927b
JR
154commit:
155
156 spin_lock_irqsave(&amd_lock, flags);
157 if (amd_chipset.probe_count > 0) {
158 /* race - someone else was faster - drop devices */
159
160 /* Mark that we where here */
161 amd_chipset.probe_count++;
162 ret = amd_chipset.probe_result;
163
164 spin_unlock_irqrestore(&amd_lock, flags);
165
166 if (info.nb_dev)
167 pci_dev_put(info.nb_dev);
168 if (info.smbus_dev)
169 pci_dev_put(info.smbus_dev);
170
171 } else {
172 /* no race - commit the result */
173 info.probe_count++;
174 amd_chipset = info;
175 spin_unlock_irqrestore(&amd_lock, flags);
176 }
177
178 return ret;
ad93562b
AX
179}
180EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
181
182/*
183 * The hardware normally enables the A-link power management feature, which
184 * lets the system lower the power consumption in idle states.
185 *
186 * This USB quirk prevents the link going into that lower power state
187 * during isochronous transfers.
188 *
189 * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
190 * some AMD platforms may stutter or have breaks occasionally.
191 */
192static void usb_amd_quirk_pll(int disable)
193{
194 u32 addr, addr_low, addr_high, val;
195 u32 bit = disable ? 0 : 1;
196 unsigned long flags;
197
198 spin_lock_irqsave(&amd_lock, flags);
199
200 if (disable) {
201 amd_chipset.isoc_reqs++;
202 if (amd_chipset.isoc_reqs > 1) {
203 spin_unlock_irqrestore(&amd_lock, flags);
204 return;
205 }
206 } else {
207 amd_chipset.isoc_reqs--;
208 if (amd_chipset.isoc_reqs > 0) {
209 spin_unlock_irqrestore(&amd_lock, flags);
210 return;
211 }
212 }
213
214 if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) {
215 outb_p(AB_REG_BAR_LOW, 0xcd6);
216 addr_low = inb_p(0xcd7);
217 outb_p(AB_REG_BAR_HIGH, 0xcd6);
218 addr_high = inb_p(0xcd7);
219 addr = addr_high << 8 | addr_low;
220
221 outl_p(0x30, AB_INDX(addr));
222 outl_p(0x40, AB_DATA(addr));
223 outl_p(0x34, AB_INDX(addr));
224 val = inl_p(AB_DATA(addr));
225 } else if (amd_chipset.sb_type == 3) {
226 pci_read_config_dword(amd_chipset.smbus_dev,
227 AB_REG_BAR_SB700, &addr);
228 outl(AX_INDXC, AB_INDX(addr));
229 outl(0x40, AB_DATA(addr));
230 outl(AX_DATAC, AB_INDX(addr));
231 val = inl(AB_DATA(addr));
232 } else {
233 spin_unlock_irqrestore(&amd_lock, flags);
234 return;
235 }
236
237 if (disable) {
238 val &= ~0x08;
239 val |= (1 << 4) | (1 << 9);
240 } else {
241 val |= 0x08;
242 val &= ~((1 << 4) | (1 << 9));
243 }
244 outl_p(val, AB_DATA(addr));
245
246 if (!amd_chipset.nb_dev) {
247 spin_unlock_irqrestore(&amd_lock, flags);
248 return;
249 }
250
251 if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
252 addr = PCIE_P_CNTL;
253 pci_write_config_dword(amd_chipset.nb_dev,
254 NB_PCIE_INDX_ADDR, addr);
255 pci_read_config_dword(amd_chipset.nb_dev,
256 NB_PCIE_INDX_DATA, &val);
257
258 val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
259 val |= bit | (bit << 3) | (bit << 12);
260 val |= ((!bit) << 4) | ((!bit) << 9);
261 pci_write_config_dword(amd_chipset.nb_dev,
262 NB_PCIE_INDX_DATA, val);
263
264 addr = BIF_NB;
265 pci_write_config_dword(amd_chipset.nb_dev,
266 NB_PCIE_INDX_ADDR, addr);
267 pci_read_config_dword(amd_chipset.nb_dev,
268 NB_PCIE_INDX_DATA, &val);
269 val &= ~(1 << 8);
270 val |= bit << 8;
271
272 pci_write_config_dword(amd_chipset.nb_dev,
273 NB_PCIE_INDX_DATA, val);
274 } else if (amd_chipset.nb_type == 2) {
275 addr = NB_PIF0_PWRDOWN_0;
276 pci_write_config_dword(amd_chipset.nb_dev,
277 NB_PCIE_INDX_ADDR, addr);
278 pci_read_config_dword(amd_chipset.nb_dev,
279 NB_PCIE_INDX_DATA, &val);
280 if (disable)
281 val &= ~(0x3f << 7);
282 else
283 val |= 0x3f << 7;
284
285 pci_write_config_dword(amd_chipset.nb_dev,
286 NB_PCIE_INDX_DATA, val);
287
288 addr = NB_PIF0_PWRDOWN_1;
289 pci_write_config_dword(amd_chipset.nb_dev,
290 NB_PCIE_INDX_ADDR, addr);
291 pci_read_config_dword(amd_chipset.nb_dev,
292 NB_PCIE_INDX_DATA, &val);
293 if (disable)
294 val &= ~(0x3f << 7);
295 else
296 val |= 0x3f << 7;
297
298 pci_write_config_dword(amd_chipset.nb_dev,
299 NB_PCIE_INDX_DATA, val);
300 }
301
302 spin_unlock_irqrestore(&amd_lock, flags);
303 return;
304}
305
306void usb_amd_quirk_pll_disable(void)
307{
308 usb_amd_quirk_pll(1);
309}
310EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
311
312void usb_amd_quirk_pll_enable(void)
313{
314 usb_amd_quirk_pll(0);
315}
316EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
317
318void usb_amd_dev_put(void)
319{
9ab7927b 320 struct pci_dev *nb, *smbus;
ad93562b
AX
321 unsigned long flags;
322
323 spin_lock_irqsave(&amd_lock, flags);
324
325 amd_chipset.probe_count--;
326 if (amd_chipset.probe_count > 0) {
327 spin_unlock_irqrestore(&amd_lock, flags);
328 return;
329 }
330
9ab7927b
JR
331 /* save them to pci_dev_put outside of spinlock */
332 nb = amd_chipset.nb_dev;
333 smbus = amd_chipset.smbus_dev;
334
335 amd_chipset.nb_dev = NULL;
336 amd_chipset.smbus_dev = NULL;
ad93562b
AX
337 amd_chipset.nb_type = 0;
338 amd_chipset.sb_type = 0;
339 amd_chipset.isoc_reqs = 0;
340 amd_chipset.probe_result = 0;
341
342 spin_unlock_irqrestore(&amd_lock, flags);
9ab7927b
JR
343
344 if (nb)
345 pci_dev_put(nb);
346 if (smbus)
347 pci_dev_put(smbus);
ad93562b
AX
348}
349EXPORT_SYMBOL_GPL(usb_amd_dev_put);
7586269c 350
bb200f6e
AS
351/*
352 * Make sure the controller is completely inactive, unable to
353 * generate interrupts or do DMA.
354 */
355void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
356{
357 /* Turn off PIRQ enable and SMI enable. (This also turns off the
358 * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
359 */
360 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
361
362 /* Reset the HC - this will force us to get a
363 * new notification of any already connected
364 * ports due to the virtual disconnect that it
365 * implies.
366 */
367 outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
368 mb();
369 udelay(5);
370 if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
371 dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
372
373 /* Just to be safe, disable interrupt requests and
374 * make sure the controller is stopped.
375 */
376 outw(0, base + UHCI_USBINTR);
377 outw(0, base + UHCI_USBCMD);
378}
379EXPORT_SYMBOL_GPL(uhci_reset_hc);
380
381/*
382 * Initialize a controller that was newly discovered or has just been
383 * resumed. In either case we can't be sure of its previous state.
384 *
385 * Returns: 1 if the controller was reset, 0 otherwise.
386 */
387int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
388{
389 u16 legsup;
390 unsigned int cmd, intr;
391
392 /*
393 * When restarting a suspended controller, we expect all the
394 * settings to be the same as we left them:
395 *
396 * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
397 * Controller is stopped and configured with EGSM set;
398 * No interrupts enabled except possibly Resume Detect.
399 *
400 * If any of these conditions are violated we do a complete reset.
401 */
402 pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
403 if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
404 dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
441b62c1 405 __func__, legsup);
bb200f6e
AS
406 goto reset_needed;
407 }
408
409 cmd = inw(base + UHCI_USBCMD);
410 if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
411 !(cmd & UHCI_USBCMD_EGSM)) {
412 dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
441b62c1 413 __func__, cmd);
bb200f6e
AS
414 goto reset_needed;
415 }
416
417 intr = inw(base + UHCI_USBINTR);
418 if (intr & (~UHCI_USBINTR_RESUME)) {
419 dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
441b62c1 420 __func__, intr);
bb200f6e
AS
421 goto reset_needed;
422 }
423 return 0;
424
425reset_needed:
426 dev_dbg(&pdev->dev, "Performing full reset\n");
427 uhci_reset_hc(pdev, base);
428 return 1;
429}
430EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
431
541ab4af
LT
432static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
433{
434 u16 cmd;
435 return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
436}
437
438#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
439#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
440
7586269c
DB
441static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
442{
443 unsigned long base = 0;
7586269c
DB
444 int i;
445
541ab4af
LT
446 if (!pio_enabled(pdev))
447 return;
448
7586269c
DB
449 for (i = 0; i < PCI_ROM_RESOURCE; i++)
450 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
451 base = pci_resource_start(pdev, i);
452 break;
453 }
454
bb200f6e
AS
455 if (base)
456 uhci_check_and_reset_hc(pdev, base);
7586269c
DB
457}
458
541ab4af
LT
459static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
460{
461 return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
462}
463
7586269c
DB
464static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
465{
466 void __iomem *base;
3df7169e 467 u32 control;
7586269c 468
541ab4af
LT
469 if (!mmio_resource_enabled(pdev, 0))
470 return;
471
8e8ce4b6
AV
472 base = pci_ioremap_bar(pdev, 0);
473 if (base == NULL)
474 return;
7586269c 475
3df7169e
AS
476 control = readl(base + OHCI_CONTROL);
477
f2cb36c1 478/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
3df7169e
AS
479#ifdef __hppa__
480#define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR)
481#else
482#define OHCI_CTRL_MASK OHCI_CTRL_RWC
483
f2cb36c1 484 if (control & OHCI_CTRL_IR) {
c1b45f24 485 int wait_time = 500; /* arbitrary; 5 seconds */
7586269c
DB
486 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
487 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
488 while (wait_time > 0 &&
489 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
490 wait_time -= 10;
491 msleep(10);
492 }
f2cb36c1 493 if (wait_time <= 0)
f0fda801 494 dev_warn(&pdev->dev, "OHCI: BIOS handoff failed"
495 " (BIOS bug?) %08x\n",
a38408cd 496 readl(base + OHCI_CONTROL));
7586269c 497 }
f2cb36c1 498#endif
7586269c 499
3df7169e
AS
500 /* reset controller, preserving RWC (and possibly IR) */
501 writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
6ea12a04
AS
502 readl(base + OHCI_CONTROL);
503
504 /* Some NVIDIA controllers stop working if kept in RESET for too long */
505 if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
506 u32 fminterval;
507 int cnt;
508
509 /* drive reset for at least 50 ms (7.1.7.5) */
510 msleep(50);
511
512 /* software reset of the controller, preserving HcFmInterval */
513 fminterval = readl(base + OHCI_FMINTERVAL);
514 writel(OHCI_HCR, base + OHCI_CMDSTATUS);
515
516 /* reset requires max 10 us delay */
517 for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
518 if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
519 break;
520 udelay(1);
521 }
522 writel(fminterval, base + OHCI_FMINTERVAL);
523
524 /* Now we're in the SUSPEND state with all devices reset
525 * and wakeups and interrupts disabled
526 */
527 }
3df7169e 528
7586269c
DB
529 /*
530 * disable interrupts
531 */
532 writel(~(u32)0, base + OHCI_INTRDISABLE);
533 writel(~(u32)0, base + OHCI_INTRSTATUS);
534
535 iounmap(base);
536}
537
03c75362
AA
538static const struct dmi_system_id __initconst ehci_dmi_nohandoff_table[] = {
539 {
540 /* Pegatron Lucid (ExoPC) */
541 .matches = {
542 DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
543 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
544 },
545 },
0c42a4e8
AA
546 {
547 /* Pegatron Lucid (Ordissimo AIRIS) */
548 .matches = {
549 DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
550 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
551 },
552 },
03c75362
AA
553 { }
554};
555
5c853013
AR
556static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
557 void __iomem *op_reg_base,
558 u32 cap, u8 offset)
559{
3610ea53
AR
560 int try_handoff = 1, tried_handoff = 0;
561
03c75362
AA
562 /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
563 * the handoff on its unused controller. Skip it. */
3610ea53 564 if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
03c75362 565 if (dmi_check_system(ehci_dmi_nohandoff_table))
3610ea53
AR
566 try_handoff = 0;
567 }
5c853013 568
3610ea53 569 if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
5c853013
AR
570 dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
571
572#if 0
573/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
574 * but that seems dubious in general (the BIOS left it off intentionally)
575 * and is known to prevent some systems from booting. so we won't do this
576 * unless maybe we can determine when we're on a system that needs SMI forced.
577 */
578 /* BIOS workaround (?): be sure the pre-Linux code
579 * receives the SMI
580 */
581 pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
582 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
583 val | EHCI_USBLEGCTLSTS_SOOE);
584#endif
585
586 /* some systems get upset if this semaphore is
587 * set for any other reason than forcing a BIOS
588 * handoff..
589 */
590 pci_write_config_byte(pdev, offset + 3, 1);
591 }
592
593 /* if boot firmware now owns EHCI, spin till it hands it over. */
3610ea53
AR
594 if (try_handoff) {
595 int msec = 1000;
596 while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
597 tried_handoff = 1;
598 msleep(10);
599 msec -= 10;
600 pci_read_config_dword(pdev, offset, &cap);
601 }
5c853013
AR
602 }
603
604 if (cap & EHCI_USBLEGSUP_BIOS) {
605 /* well, possibly buggy BIOS... try to shut it down,
606 * and hope nothing goes too wrong
607 */
3610ea53
AR
608 if (try_handoff)
609 dev_warn(&pdev->dev, "EHCI: BIOS handoff failed"
610 " (BIOS bug?) %08x\n", cap);
5c853013
AR
611 pci_write_config_byte(pdev, offset + 2, 0);
612 }
613
614 /* just in case, always disable EHCI SMIs */
615 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
616
617 /* If the BIOS ever owned the controller then we can't expect
618 * any power sessions to remain intact.
619 */
620 if (tried_handoff)
621 writel(0, op_reg_base + EHCI_CONFIGFLAG);
622}
623
7586269c
DB
624static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
625{
7586269c 626 void __iomem *base, *op_reg_base;
5c853013 627 u32 hcc_params, cap, val;
401feafa 628 u8 offset, cap_length;
5c853013 629 int wait_time, delta, count = 256/4;
7586269c 630
541ab4af
LT
631 if (!mmio_resource_enabled(pdev, 0))
632 return;
633
8e8ce4b6
AV
634 base = pci_ioremap_bar(pdev, 0);
635 if (base == NULL)
636 return;
7586269c
DB
637
638 cap_length = readb(base);
639 op_reg_base = base + cap_length;
401feafa
DB
640
641 /* EHCI 0.96 and later may have "extended capabilities"
642 * spec section 5.1 explains the bios handoff, e.g. for
643 * booting from USB disk or using a usb keyboard
644 */
7586269c 645 hcc_params = readl(base + EHCI_HCC_PARAMS);
401feafa 646 offset = (hcc_params >> 8) & 0xff;
6e14bda1 647 while (offset && --count) {
401feafa 648 pci_read_config_dword(pdev, offset, &cap);
401feafa 649
5c853013
AR
650 switch (cap & 0xff) {
651 case 1:
652 ehci_bios_handoff(pdev, op_reg_base, cap, offset);
401feafa 653 break;
5c853013
AR
654 case 0: /* Illegal reserved cap, set cap=0 so we exit */
655 cap = 0; /* then fallthrough... */
401feafa 656 default:
f0fda801 657 dev_warn(&pdev->dev, "EHCI: unrecognized capability "
5c853013 658 "%02x\n", cap & 0xff);
7586269c 659 }
401feafa 660 offset = (cap >> 8) & 0xff;
7586269c 661 }
401feafa 662 if (!count)
f0fda801 663 dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
7586269c
DB
664
665 /*
666 * halt EHCI & disable its interrupts in any case
667 */
668 val = readl(op_reg_base + EHCI_USBSTS);
669 if ((val & EHCI_USBSTS_HALTED) == 0) {
670 val = readl(op_reg_base + EHCI_USBCMD);
671 val &= ~EHCI_USBCMD_RUN;
672 writel(val, op_reg_base + EHCI_USBCMD);
673
674 wait_time = 2000;
675 delta = 100;
676 do {
677 writel(0x3f, op_reg_base + EHCI_USBSTS);
678 udelay(delta);
679 wait_time -= delta;
680 val = readl(op_reg_base + EHCI_USBSTS);
681 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
682 break;
683 }
684 } while (wait_time > 0);
685 }
686 writel(0, op_reg_base + EHCI_USBINTR);
687 writel(0x3f, op_reg_base + EHCI_USBSTS);
688
689 iounmap(base);
7586269c
DB
690}
691
66d4eadd
SS
692/*
693 * handshake - spin reading a register until handshake completes
694 * @ptr: address of hc register to be read
695 * @mask: bits to look at in result of read
696 * @done: value of those bits when handshake succeeds
697 * @wait_usec: timeout in microseconds
698 * @delay_usec: delay in microseconds to wait between polling
699 *
700 * Polls a register every delay_usec microseconds.
701 * Returns 0 when the mask bits have the value done.
702 * Returns -ETIMEDOUT if this condition is not true after
703 * wait_usec microseconds have passed.
704 */
705static int handshake(void __iomem *ptr, u32 mask, u32 done,
706 int wait_usec, int delay_usec)
707{
708 u32 result;
709
710 do {
711 result = readl(ptr);
712 result &= mask;
713 if (result == done)
714 return 0;
715 udelay(delay_usec);
716 wait_usec -= delay_usec;
717 } while (wait_usec > 0);
718 return -ETIMEDOUT;
719}
720
69e848c2
SS
721bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
722{
723 return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
724 pdev->vendor == PCI_VENDOR_ID_INTEL &&
725 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
726}
727EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
728
729/*
730 * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
731 * share some number of ports. These ports can be switched between either
732 * controller. Not all of the ports under the EHCI host controller may be
733 * switchable.
734 *
735 * The ports should be switched over to xHCI before PCI probes for any device
736 * start. This avoids active devices under EHCI being disconnected during the
737 * port switchover, which could cause loss of data on USB storage devices, or
738 * failed boot when the root file system is on a USB mass storage device and is
739 * enumerated under EHCI first.
740 *
741 * We write into the xHC's PCI configuration space in some Intel-specific
742 * registers to switch the ports over. The USB 3.0 terminations and the USB
743 * 2.0 data wires are switched separately. We want to enable the SuperSpeed
744 * terminations before switching the USB 2.0 wires over, so that USB 3.0
745 * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
746 */
747void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
748{
749 u32 ports_available;
750
751 ports_available = 0xffffffff;
752 /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
753 * Register, to turn on SuperSpeed terminations for all
754 * available ports.
755 */
756 pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
757 cpu_to_le32(ports_available));
758
759 pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
760 &ports_available);
761 dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
762 "under xHCI: 0x%x\n", ports_available);
763
764 ports_available = 0xffffffff;
765 /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
766 * switch the USB 2.0 power and data lines over to the xHCI
767 * host.
768 */
769 pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
770 cpu_to_le32(ports_available));
771
772 pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
773 &ports_available);
774 dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
775 "to xHCI: 0x%x\n", ports_available);
776}
777EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
778
66d4eadd
SS
779/**
780 * PCI Quirks for xHCI.
781 *
782 * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
783 * It signals to the BIOS that the OS wants control of the host controller,
784 * and then waits 5 seconds for the BIOS to hand over control.
785 * If we timeout, assume the BIOS is broken and take control anyway.
786 */
787static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
788{
789 void __iomem *base;
790 int ext_cap_offset;
791 void __iomem *op_reg_base;
792 u32 val;
793 int timeout;
794
795 if (!mmio_resource_enabled(pdev, 0))
796 return;
797
798 base = ioremap_nocache(pci_resource_start(pdev, 0),
799 pci_resource_len(pdev, 0));
800 if (base == NULL)
801 return;
7586269c 802
66d4eadd
SS
803 /*
804 * Find the Legacy Support Capability register -
805 * this is optional for xHCI host controllers.
806 */
807 ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
808 do {
809 if (!ext_cap_offset)
810 /* We've reached the end of the extended capabilities */
811 goto hc_init;
812 val = readl(base + ext_cap_offset);
813 if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
814 break;
815 ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
816 } while (1);
817
818 /* If the BIOS owns the HC, signal that the OS wants it, and wait */
819 if (val & XHCI_HC_BIOS_OWNED) {
6768458b 820 writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
66d4eadd
SS
821
822 /* Wait for 5 seconds with 10 microsecond polling interval */
823 timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
824 0, 5000, 10);
825
826 /* Assume a buggy BIOS and take HC ownership anyway */
827 if (timeout) {
828 dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
829 " (BIOS bug ?) %08x\n", val);
830 writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
831 }
832 }
833
834 /* Disable any BIOS SMIs */
835 writel(XHCI_LEGACY_DISABLE_SMI,
836 base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
837
69e848c2
SS
838 if (usb_is_intel_switchable_xhci(pdev))
839 usb_enable_xhci_ports(pdev);
66d4eadd
SS
840hc_init:
841 op_reg_base = base + XHCI_HC_LENGTH(readl(base));
842
843 /* Wait for the host controller to be ready before writing any
844 * operational or runtime registers. Wait 5 seconds and no more.
845 */
846 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
847 5000, 10);
848 /* Assume a buggy HC and start HC initialization anyway */
849 if (timeout) {
850 val = readl(op_reg_base + XHCI_STS_OFFSET);
851 dev_warn(&pdev->dev,
852 "xHCI HW not ready after 5 sec (HC bug?) "
853 "status = 0x%x\n", val);
854 }
855
856 /* Send the halt and disable interrupts command */
857 val = readl(op_reg_base + XHCI_CMD_OFFSET);
858 val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
859 writel(val, op_reg_base + XHCI_CMD_OFFSET);
860
861 /* Wait for the HC to halt - poll every 125 usec (one microframe). */
862 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
863 XHCI_MAX_HALT_USEC, 125);
864 if (timeout) {
865 val = readl(op_reg_base + XHCI_STS_OFFSET);
866 dev_warn(&pdev->dev,
867 "xHCI HW did not halt within %d usec "
868 "status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
869 }
870
871 iounmap(base);
872}
7586269c
DB
873
874static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
875{
478a3bab 876 if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
7586269c 877 quirk_usb_handoff_uhci(pdev);
478a3bab 878 else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
7586269c 879 quirk_usb_handoff_ohci(pdev);
478a3bab 880 else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
7586269c 881 quirk_usb_disable_ehci(pdev);
66d4eadd
SS
882 else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
883 quirk_usb_handoff_xhci(pdev);
7586269c 884}
d93a8f82 885DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
This page took 0.611692 seconds and 5 git commands to generate.