Commit | Line | Data |
---|---|---|
7586269c DB |
1 | /* |
2 | * This file contains code to reset and initialize USB host controllers. | |
3 | * Some of it includes work-arounds for PCI hardware and BIOS quirks. | |
4 | * It may need to run early during booting -- before USB would normally | |
5 | * initialize -- to ensure that Linux doesn't use any legacy modes. | |
6 | * | |
7 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> | |
8 | * (and others) | |
9 | */ | |
10 | ||
7586269c | 11 | #include <linux/types.h> |
51c9e6c7 | 12 | #include <linux/kconfig.h> |
7586269c DB |
13 | #include <linux/kernel.h> |
14 | #include <linux/pci.h> | |
15 | #include <linux/init.h> | |
16 | #include <linux/delay.h> | |
f940fcd8 | 17 | #include <linux/export.h> |
7586269c | 18 | #include <linux/acpi.h> |
3610ea53 | 19 | #include <linux/dmi.h> |
75e2df60 | 20 | #include "pci-quirks.h" |
66d4eadd | 21 | #include "xhci-ext-caps.h" |
7586269c DB |
22 | |
23 | ||
7586269c DB |
24 | #define UHCI_USBLEGSUP 0xc0 /* legacy support */ |
25 | #define UHCI_USBCMD 0 /* command register */ | |
7586269c | 26 | #define UHCI_USBINTR 4 /* interrupt register */ |
bb200f6e AS |
27 | #define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ |
28 | #define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ | |
29 | #define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */ | |
30 | #define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */ | |
31 | #define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */ | |
32 | #define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */ | |
33 | #define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */ | |
7586269c DB |
34 | |
35 | #define OHCI_CONTROL 0x04 | |
36 | #define OHCI_CMDSTATUS 0x08 | |
37 | #define OHCI_INTRSTATUS 0x0c | |
38 | #define OHCI_INTRENABLE 0x10 | |
39 | #define OHCI_INTRDISABLE 0x14 | |
6ea12a04 | 40 | #define OHCI_FMINTERVAL 0x34 |
c6187597 | 41 | #define OHCI_HCFS (3 << 6) /* hc functional state */ |
6ea12a04 | 42 | #define OHCI_HCR (1 << 0) /* host controller reset */ |
7586269c | 43 | #define OHCI_OCR (1 << 3) /* ownership change request */ |
f2cb36c1 | 44 | #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ |
7586269c DB |
45 | #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ |
46 | #define OHCI_INTR_OC (1 << 30) /* ownership change */ | |
47 | ||
48 | #define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ | |
49 | #define EHCI_USBCMD 0 /* command register */ | |
50 | #define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ | |
51 | #define EHCI_USBSTS 4 /* status register */ | |
52 | #define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ | |
53 | #define EHCI_USBINTR 8 /* interrupt register */ | |
4fe5354f | 54 | #define EHCI_CONFIGFLAG 0x40 /* configured flag register */ |
7586269c DB |
55 | #define EHCI_USBLEGSUP 0 /* legacy support register */ |
56 | #define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ | |
57 | #define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ | |
58 | #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ | |
59 | #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ | |
60 | ||
ad93562b AX |
61 | /* AMD quirk use */ |
62 | #define AB_REG_BAR_LOW 0xe0 | |
63 | #define AB_REG_BAR_HIGH 0xe1 | |
64 | #define AB_REG_BAR_SB700 0xf0 | |
65 | #define AB_INDX(addr) ((addr) + 0x00) | |
66 | #define AB_DATA(addr) ((addr) + 0x04) | |
67 | #define AX_INDXC 0x30 | |
68 | #define AX_DATAC 0x34 | |
69 | ||
70 | #define NB_PCIE_INDX_ADDR 0xe0 | |
71 | #define NB_PCIE_INDX_DATA 0xe4 | |
72 | #define PCIE_P_CNTL 0x10040 | |
73 | #define BIF_NB 0x10002 | |
74 | #define NB_PIF0_PWRDOWN_0 0x01100012 | |
75 | #define NB_PIF0_PWRDOWN_1 0x01100013 | |
76 | ||
69e848c2 | 77 | #define USB_INTEL_XUSB2PR 0xD0 |
a96874a2 | 78 | #define USB_INTEL_USB2PRM 0xD4 |
69e848c2 | 79 | #define USB_INTEL_USB3_PSSEN 0xD8 |
a96874a2 | 80 | #define USB_INTEL_USB3PRM 0xDC |
69e848c2 | 81 | |
ad93562b AX |
82 | static struct amd_chipset_info { |
83 | struct pci_dev *nb_dev; | |
84 | struct pci_dev *smbus_dev; | |
85 | int nb_type; | |
86 | int sb_type; | |
87 | int isoc_reqs; | |
88 | int probe_count; | |
89 | int probe_result; | |
90 | } amd_chipset; | |
91 | ||
92 | static DEFINE_SPINLOCK(amd_lock); | |
93 | ||
94 | int usb_amd_find_chipset_info(void) | |
95 | { | |
96 | u8 rev = 0; | |
97 | unsigned long flags; | |
9ab7927b JR |
98 | struct amd_chipset_info info; |
99 | int ret; | |
ad93562b AX |
100 | |
101 | spin_lock_irqsave(&amd_lock, flags); | |
102 | ||
ad93562b | 103 | /* probe only once */ |
9ab7927b JR |
104 | if (amd_chipset.probe_count > 0) { |
105 | amd_chipset.probe_count++; | |
ad93562b AX |
106 | spin_unlock_irqrestore(&amd_lock, flags); |
107 | return amd_chipset.probe_result; | |
108 | } | |
9ab7927b JR |
109 | memset(&info, 0, sizeof(info)); |
110 | spin_unlock_irqrestore(&amd_lock, flags); | |
ad93562b | 111 | |
9ab7927b JR |
112 | info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); |
113 | if (info.smbus_dev) { | |
114 | rev = info.smbus_dev->revision; | |
ad93562b | 115 | if (rev >= 0x40) |
9ab7927b | 116 | info.sb_type = 1; |
ad93562b | 117 | else if (rev >= 0x30 && rev <= 0x3b) |
9ab7927b | 118 | info.sb_type = 3; |
ad93562b | 119 | } else { |
9ab7927b JR |
120 | info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, |
121 | 0x780b, NULL); | |
122 | if (!info.smbus_dev) { | |
123 | ret = 0; | |
124 | goto commit; | |
ad93562b | 125 | } |
9ab7927b JR |
126 | |
127 | rev = info.smbus_dev->revision; | |
ad93562b | 128 | if (rev >= 0x11 && rev <= 0x18) |
9ab7927b | 129 | info.sb_type = 2; |
ad93562b AX |
130 | } |
131 | ||
9ab7927b JR |
132 | if (info.sb_type == 0) { |
133 | if (info.smbus_dev) { | |
134 | pci_dev_put(info.smbus_dev); | |
135 | info.smbus_dev = NULL; | |
ad93562b | 136 | } |
9ab7927b JR |
137 | ret = 0; |
138 | goto commit; | |
ad93562b AX |
139 | } |
140 | ||
9ab7927b JR |
141 | info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL); |
142 | if (info.nb_dev) { | |
143 | info.nb_type = 1; | |
ad93562b | 144 | } else { |
9ab7927b JR |
145 | info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); |
146 | if (info.nb_dev) { | |
147 | info.nb_type = 2; | |
148 | } else { | |
149 | info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, | |
150 | 0x9600, NULL); | |
151 | if (info.nb_dev) | |
152 | info.nb_type = 3; | |
ad93562b AX |
153 | } |
154 | } | |
155 | ||
9ab7927b | 156 | ret = info.probe_result = 1; |
ad93562b AX |
157 | printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); |
158 | ||
9ab7927b JR |
159 | commit: |
160 | ||
161 | spin_lock_irqsave(&amd_lock, flags); | |
162 | if (amd_chipset.probe_count > 0) { | |
163 | /* race - someone else was faster - drop devices */ | |
164 | ||
165 | /* Mark that we where here */ | |
166 | amd_chipset.probe_count++; | |
167 | ret = amd_chipset.probe_result; | |
168 | ||
169 | spin_unlock_irqrestore(&amd_lock, flags); | |
170 | ||
171 | if (info.nb_dev) | |
172 | pci_dev_put(info.nb_dev); | |
173 | if (info.smbus_dev) | |
174 | pci_dev_put(info.smbus_dev); | |
175 | ||
176 | } else { | |
177 | /* no race - commit the result */ | |
178 | info.probe_count++; | |
179 | amd_chipset = info; | |
180 | spin_unlock_irqrestore(&amd_lock, flags); | |
181 | } | |
182 | ||
183 | return ret; | |
ad93562b AX |
184 | } |
185 | EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); | |
186 | ||
187 | /* | |
188 | * The hardware normally enables the A-link power management feature, which | |
189 | * lets the system lower the power consumption in idle states. | |
190 | * | |
191 | * This USB quirk prevents the link going into that lower power state | |
192 | * during isochronous transfers. | |
193 | * | |
194 | * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of | |
195 | * some AMD platforms may stutter or have breaks occasionally. | |
196 | */ | |
197 | static void usb_amd_quirk_pll(int disable) | |
198 | { | |
199 | u32 addr, addr_low, addr_high, val; | |
200 | u32 bit = disable ? 0 : 1; | |
201 | unsigned long flags; | |
202 | ||
203 | spin_lock_irqsave(&amd_lock, flags); | |
204 | ||
205 | if (disable) { | |
206 | amd_chipset.isoc_reqs++; | |
207 | if (amd_chipset.isoc_reqs > 1) { | |
208 | spin_unlock_irqrestore(&amd_lock, flags); | |
209 | return; | |
210 | } | |
211 | } else { | |
212 | amd_chipset.isoc_reqs--; | |
213 | if (amd_chipset.isoc_reqs > 0) { | |
214 | spin_unlock_irqrestore(&amd_lock, flags); | |
215 | return; | |
216 | } | |
217 | } | |
218 | ||
219 | if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) { | |
220 | outb_p(AB_REG_BAR_LOW, 0xcd6); | |
221 | addr_low = inb_p(0xcd7); | |
222 | outb_p(AB_REG_BAR_HIGH, 0xcd6); | |
223 | addr_high = inb_p(0xcd7); | |
224 | addr = addr_high << 8 | addr_low; | |
225 | ||
226 | outl_p(0x30, AB_INDX(addr)); | |
227 | outl_p(0x40, AB_DATA(addr)); | |
228 | outl_p(0x34, AB_INDX(addr)); | |
229 | val = inl_p(AB_DATA(addr)); | |
230 | } else if (amd_chipset.sb_type == 3) { | |
231 | pci_read_config_dword(amd_chipset.smbus_dev, | |
232 | AB_REG_BAR_SB700, &addr); | |
233 | outl(AX_INDXC, AB_INDX(addr)); | |
234 | outl(0x40, AB_DATA(addr)); | |
235 | outl(AX_DATAC, AB_INDX(addr)); | |
236 | val = inl(AB_DATA(addr)); | |
237 | } else { | |
238 | spin_unlock_irqrestore(&amd_lock, flags); | |
239 | return; | |
240 | } | |
241 | ||
242 | if (disable) { | |
243 | val &= ~0x08; | |
244 | val |= (1 << 4) | (1 << 9); | |
245 | } else { | |
246 | val |= 0x08; | |
247 | val &= ~((1 << 4) | (1 << 9)); | |
248 | } | |
249 | outl_p(val, AB_DATA(addr)); | |
250 | ||
251 | if (!amd_chipset.nb_dev) { | |
252 | spin_unlock_irqrestore(&amd_lock, flags); | |
253 | return; | |
254 | } | |
255 | ||
256 | if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) { | |
257 | addr = PCIE_P_CNTL; | |
258 | pci_write_config_dword(amd_chipset.nb_dev, | |
259 | NB_PCIE_INDX_ADDR, addr); | |
260 | pci_read_config_dword(amd_chipset.nb_dev, | |
261 | NB_PCIE_INDX_DATA, &val); | |
262 | ||
263 | val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12)); | |
264 | val |= bit | (bit << 3) | (bit << 12); | |
265 | val |= ((!bit) << 4) | ((!bit) << 9); | |
266 | pci_write_config_dword(amd_chipset.nb_dev, | |
267 | NB_PCIE_INDX_DATA, val); | |
268 | ||
269 | addr = BIF_NB; | |
270 | pci_write_config_dword(amd_chipset.nb_dev, | |
271 | NB_PCIE_INDX_ADDR, addr); | |
272 | pci_read_config_dword(amd_chipset.nb_dev, | |
273 | NB_PCIE_INDX_DATA, &val); | |
274 | val &= ~(1 << 8); | |
275 | val |= bit << 8; | |
276 | ||
277 | pci_write_config_dword(amd_chipset.nb_dev, | |
278 | NB_PCIE_INDX_DATA, val); | |
279 | } else if (amd_chipset.nb_type == 2) { | |
280 | addr = NB_PIF0_PWRDOWN_0; | |
281 | pci_write_config_dword(amd_chipset.nb_dev, | |
282 | NB_PCIE_INDX_ADDR, addr); | |
283 | pci_read_config_dword(amd_chipset.nb_dev, | |
284 | NB_PCIE_INDX_DATA, &val); | |
285 | if (disable) | |
286 | val &= ~(0x3f << 7); | |
287 | else | |
288 | val |= 0x3f << 7; | |
289 | ||
290 | pci_write_config_dword(amd_chipset.nb_dev, | |
291 | NB_PCIE_INDX_DATA, val); | |
292 | ||
293 | addr = NB_PIF0_PWRDOWN_1; | |
294 | pci_write_config_dword(amd_chipset.nb_dev, | |
295 | NB_PCIE_INDX_ADDR, addr); | |
296 | pci_read_config_dword(amd_chipset.nb_dev, | |
297 | NB_PCIE_INDX_DATA, &val); | |
298 | if (disable) | |
299 | val &= ~(0x3f << 7); | |
300 | else | |
301 | val |= 0x3f << 7; | |
302 | ||
303 | pci_write_config_dword(amd_chipset.nb_dev, | |
304 | NB_PCIE_INDX_DATA, val); | |
305 | } | |
306 | ||
307 | spin_unlock_irqrestore(&amd_lock, flags); | |
308 | return; | |
309 | } | |
310 | ||
311 | void usb_amd_quirk_pll_disable(void) | |
312 | { | |
313 | usb_amd_quirk_pll(1); | |
314 | } | |
315 | EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); | |
316 | ||
317 | void usb_amd_quirk_pll_enable(void) | |
318 | { | |
319 | usb_amd_quirk_pll(0); | |
320 | } | |
321 | EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable); | |
322 | ||
323 | void usb_amd_dev_put(void) | |
324 | { | |
9ab7927b | 325 | struct pci_dev *nb, *smbus; |
ad93562b AX |
326 | unsigned long flags; |
327 | ||
328 | spin_lock_irqsave(&amd_lock, flags); | |
329 | ||
330 | amd_chipset.probe_count--; | |
331 | if (amd_chipset.probe_count > 0) { | |
332 | spin_unlock_irqrestore(&amd_lock, flags); | |
333 | return; | |
334 | } | |
335 | ||
9ab7927b JR |
336 | /* save them to pci_dev_put outside of spinlock */ |
337 | nb = amd_chipset.nb_dev; | |
338 | smbus = amd_chipset.smbus_dev; | |
339 | ||
340 | amd_chipset.nb_dev = NULL; | |
341 | amd_chipset.smbus_dev = NULL; | |
ad93562b AX |
342 | amd_chipset.nb_type = 0; |
343 | amd_chipset.sb_type = 0; | |
344 | amd_chipset.isoc_reqs = 0; | |
345 | amd_chipset.probe_result = 0; | |
346 | ||
347 | spin_unlock_irqrestore(&amd_lock, flags); | |
9ab7927b JR |
348 | |
349 | if (nb) | |
350 | pci_dev_put(nb); | |
351 | if (smbus) | |
352 | pci_dev_put(smbus); | |
ad93562b AX |
353 | } |
354 | EXPORT_SYMBOL_GPL(usb_amd_dev_put); | |
7586269c | 355 | |
bb200f6e AS |
356 | /* |
357 | * Make sure the controller is completely inactive, unable to | |
358 | * generate interrupts or do DMA. | |
359 | */ | |
360 | void uhci_reset_hc(struct pci_dev *pdev, unsigned long base) | |
361 | { | |
362 | /* Turn off PIRQ enable and SMI enable. (This also turns off the | |
363 | * BIOS's USB Legacy Support.) Turn off all the R/WC bits too. | |
364 | */ | |
365 | pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC); | |
366 | ||
367 | /* Reset the HC - this will force us to get a | |
368 | * new notification of any already connected | |
369 | * ports due to the virtual disconnect that it | |
370 | * implies. | |
371 | */ | |
372 | outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD); | |
373 | mb(); | |
374 | udelay(5); | |
375 | if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET) | |
376 | dev_warn(&pdev->dev, "HCRESET not completed yet!\n"); | |
377 | ||
378 | /* Just to be safe, disable interrupt requests and | |
379 | * make sure the controller is stopped. | |
380 | */ | |
381 | outw(0, base + UHCI_USBINTR); | |
382 | outw(0, base + UHCI_USBCMD); | |
383 | } | |
384 | EXPORT_SYMBOL_GPL(uhci_reset_hc); | |
385 | ||
386 | /* | |
387 | * Initialize a controller that was newly discovered or has just been | |
388 | * resumed. In either case we can't be sure of its previous state. | |
389 | * | |
390 | * Returns: 1 if the controller was reset, 0 otherwise. | |
391 | */ | |
392 | int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) | |
393 | { | |
394 | u16 legsup; | |
395 | unsigned int cmd, intr; | |
396 | ||
397 | /* | |
398 | * When restarting a suspended controller, we expect all the | |
399 | * settings to be the same as we left them: | |
400 | * | |
401 | * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP; | |
402 | * Controller is stopped and configured with EGSM set; | |
403 | * No interrupts enabled except possibly Resume Detect. | |
404 | * | |
405 | * If any of these conditions are violated we do a complete reset. | |
406 | */ | |
407 | pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup); | |
408 | if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) { | |
409 | dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n", | |
441b62c1 | 410 | __func__, legsup); |
bb200f6e AS |
411 | goto reset_needed; |
412 | } | |
413 | ||
414 | cmd = inw(base + UHCI_USBCMD); | |
415 | if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) || | |
416 | !(cmd & UHCI_USBCMD_EGSM)) { | |
417 | dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n", | |
441b62c1 | 418 | __func__, cmd); |
bb200f6e AS |
419 | goto reset_needed; |
420 | } | |
421 | ||
422 | intr = inw(base + UHCI_USBINTR); | |
423 | if (intr & (~UHCI_USBINTR_RESUME)) { | |
424 | dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n", | |
441b62c1 | 425 | __func__, intr); |
bb200f6e AS |
426 | goto reset_needed; |
427 | } | |
428 | return 0; | |
429 | ||
430 | reset_needed: | |
431 | dev_dbg(&pdev->dev, "Performing full reset\n"); | |
432 | uhci_reset_hc(pdev, base); | |
433 | return 1; | |
434 | } | |
435 | EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); | |
436 | ||
541ab4af LT |
437 | static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) |
438 | { | |
439 | u16 cmd; | |
440 | return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask); | |
441 | } | |
442 | ||
443 | #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO) | |
444 | #define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY) | |
445 | ||
7586269c DB |
446 | static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) |
447 | { | |
448 | unsigned long base = 0; | |
7586269c DB |
449 | int i; |
450 | ||
541ab4af LT |
451 | if (!pio_enabled(pdev)) |
452 | return; | |
453 | ||
7586269c DB |
454 | for (i = 0; i < PCI_ROM_RESOURCE; i++) |
455 | if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { | |
456 | base = pci_resource_start(pdev, i); | |
457 | break; | |
458 | } | |
459 | ||
bb200f6e AS |
460 | if (base) |
461 | uhci_check_and_reset_hc(pdev, base); | |
7586269c DB |
462 | } |
463 | ||
541ab4af LT |
464 | static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx) |
465 | { | |
466 | return pci_resource_start(pdev, idx) && mmio_enabled(pdev); | |
467 | } | |
468 | ||
7586269c DB |
469 | static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) |
470 | { | |
471 | void __iomem *base; | |
3df7169e | 472 | u32 control; |
c6187597 AS |
473 | u32 fminterval; |
474 | int cnt; | |
7586269c | 475 | |
541ab4af LT |
476 | if (!mmio_resource_enabled(pdev, 0)) |
477 | return; | |
478 | ||
8e8ce4b6 AV |
479 | base = pci_ioremap_bar(pdev, 0); |
480 | if (base == NULL) | |
481 | return; | |
7586269c | 482 | |
3df7169e AS |
483 | control = readl(base + OHCI_CONTROL); |
484 | ||
f2cb36c1 | 485 | /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ |
3df7169e AS |
486 | #ifdef __hppa__ |
487 | #define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR) | |
488 | #else | |
489 | #define OHCI_CTRL_MASK OHCI_CTRL_RWC | |
490 | ||
f2cb36c1 | 491 | if (control & OHCI_CTRL_IR) { |
c1b45f24 | 492 | int wait_time = 500; /* arbitrary; 5 seconds */ |
7586269c DB |
493 | writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); |
494 | writel(OHCI_OCR, base + OHCI_CMDSTATUS); | |
495 | while (wait_time > 0 && | |
496 | readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { | |
497 | wait_time -= 10; | |
498 | msleep(10); | |
499 | } | |
f2cb36c1 | 500 | if (wait_time <= 0) |
f0fda801 | 501 | dev_warn(&pdev->dev, "OHCI: BIOS handoff failed" |
502 | " (BIOS bug?) %08x\n", | |
a38408cd | 503 | readl(base + OHCI_CONTROL)); |
7586269c | 504 | } |
f2cb36c1 | 505 | #endif |
7586269c | 506 | |
c6187597 AS |
507 | /* disable interrupts */ |
508 | writel((u32) ~0, base + OHCI_INTRDISABLE); | |
6ea12a04 | 509 | |
c6187597 AS |
510 | /* Reset the USB bus, if the controller isn't already in RESET */ |
511 | if (control & OHCI_HCFS) { | |
512 | /* Go into RESET, preserving RWC (and possibly IR) */ | |
513 | writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); | |
514 | readl(base + OHCI_CONTROL); | |
6ea12a04 | 515 | |
c6187597 | 516 | /* drive bus reset for at least 50 ms (7.1.7.5) */ |
6ea12a04 | 517 | msleep(50); |
c6187597 | 518 | } |
6ea12a04 | 519 | |
c6187597 AS |
520 | /* software reset of the controller, preserving HcFmInterval */ |
521 | fminterval = readl(base + OHCI_FMINTERVAL); | |
522 | writel(OHCI_HCR, base + OHCI_CMDSTATUS); | |
6ea12a04 | 523 | |
c6187597 AS |
524 | /* reset requires max 10 us delay */ |
525 | for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ | |
526 | if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) | |
527 | break; | |
528 | udelay(1); | |
6ea12a04 | 529 | } |
c6187597 | 530 | writel(fminterval, base + OHCI_FMINTERVAL); |
3df7169e | 531 | |
c6187597 | 532 | /* Now the controller is safely in SUSPEND and nothing can wake it up */ |
7586269c DB |
533 | iounmap(base); |
534 | } | |
535 | ||
a7e6401e | 536 | static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = { |
03c75362 AA |
537 | { |
538 | /* Pegatron Lucid (ExoPC) */ | |
539 | .matches = { | |
540 | DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"), | |
541 | DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"), | |
542 | }, | |
543 | }, | |
0c42a4e8 AA |
544 | { |
545 | /* Pegatron Lucid (Ordissimo AIRIS) */ | |
546 | .matches = { | |
547 | DMI_MATCH(DMI_BOARD_NAME, "M11JB"), | |
548 | DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"), | |
549 | }, | |
550 | }, | |
03c75362 AA |
551 | { } |
552 | }; | |
553 | ||
5c853013 AR |
554 | static void __devinit ehci_bios_handoff(struct pci_dev *pdev, |
555 | void __iomem *op_reg_base, | |
556 | u32 cap, u8 offset) | |
557 | { | |
3610ea53 AR |
558 | int try_handoff = 1, tried_handoff = 0; |
559 | ||
03c75362 AA |
560 | /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying |
561 | * the handoff on its unused controller. Skip it. */ | |
3610ea53 | 562 | if (pdev->vendor == 0x8086 && pdev->device == 0x283a) { |
03c75362 | 563 | if (dmi_check_system(ehci_dmi_nohandoff_table)) |
3610ea53 AR |
564 | try_handoff = 0; |
565 | } | |
5c853013 | 566 | |
3610ea53 | 567 | if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) { |
5c853013 AR |
568 | dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n"); |
569 | ||
570 | #if 0 | |
571 | /* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on, | |
572 | * but that seems dubious in general (the BIOS left it off intentionally) | |
573 | * and is known to prevent some systems from booting. so we won't do this | |
574 | * unless maybe we can determine when we're on a system that needs SMI forced. | |
575 | */ | |
576 | /* BIOS workaround (?): be sure the pre-Linux code | |
577 | * receives the SMI | |
578 | */ | |
579 | pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val); | |
580 | pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, | |
581 | val | EHCI_USBLEGCTLSTS_SOOE); | |
582 | #endif | |
583 | ||
584 | /* some systems get upset if this semaphore is | |
585 | * set for any other reason than forcing a BIOS | |
586 | * handoff.. | |
587 | */ | |
588 | pci_write_config_byte(pdev, offset + 3, 1); | |
589 | } | |
590 | ||
591 | /* if boot firmware now owns EHCI, spin till it hands it over. */ | |
3610ea53 AR |
592 | if (try_handoff) { |
593 | int msec = 1000; | |
594 | while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) { | |
595 | tried_handoff = 1; | |
596 | msleep(10); | |
597 | msec -= 10; | |
598 | pci_read_config_dword(pdev, offset, &cap); | |
599 | } | |
5c853013 AR |
600 | } |
601 | ||
602 | if (cap & EHCI_USBLEGSUP_BIOS) { | |
603 | /* well, possibly buggy BIOS... try to shut it down, | |
604 | * and hope nothing goes too wrong | |
605 | */ | |
3610ea53 AR |
606 | if (try_handoff) |
607 | dev_warn(&pdev->dev, "EHCI: BIOS handoff failed" | |
608 | " (BIOS bug?) %08x\n", cap); | |
5c853013 AR |
609 | pci_write_config_byte(pdev, offset + 2, 0); |
610 | } | |
611 | ||
612 | /* just in case, always disable EHCI SMIs */ | |
613 | pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0); | |
614 | ||
615 | /* If the BIOS ever owned the controller then we can't expect | |
616 | * any power sessions to remain intact. | |
617 | */ | |
618 | if (tried_handoff) | |
619 | writel(0, op_reg_base + EHCI_CONFIGFLAG); | |
620 | } | |
621 | ||
7586269c DB |
622 | static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) |
623 | { | |
7586269c | 624 | void __iomem *base, *op_reg_base; |
5c853013 | 625 | u32 hcc_params, cap, val; |
401feafa | 626 | u8 offset, cap_length; |
97ff22ee | 627 | int wait_time, count = 256/4; |
7586269c | 628 | |
541ab4af LT |
629 | if (!mmio_resource_enabled(pdev, 0)) |
630 | return; | |
631 | ||
8e8ce4b6 AV |
632 | base = pci_ioremap_bar(pdev, 0); |
633 | if (base == NULL) | |
634 | return; | |
7586269c DB |
635 | |
636 | cap_length = readb(base); | |
637 | op_reg_base = base + cap_length; | |
401feafa DB |
638 | |
639 | /* EHCI 0.96 and later may have "extended capabilities" | |
640 | * spec section 5.1 explains the bios handoff, e.g. for | |
641 | * booting from USB disk or using a usb keyboard | |
642 | */ | |
7586269c | 643 | hcc_params = readl(base + EHCI_HCC_PARAMS); |
401feafa | 644 | offset = (hcc_params >> 8) & 0xff; |
6e14bda1 | 645 | while (offset && --count) { |
401feafa | 646 | pci_read_config_dword(pdev, offset, &cap); |
401feafa | 647 | |
5c853013 AR |
648 | switch (cap & 0xff) { |
649 | case 1: | |
650 | ehci_bios_handoff(pdev, op_reg_base, cap, offset); | |
401feafa | 651 | break; |
5c853013 AR |
652 | case 0: /* Illegal reserved cap, set cap=0 so we exit */ |
653 | cap = 0; /* then fallthrough... */ | |
401feafa | 654 | default: |
f0fda801 | 655 | dev_warn(&pdev->dev, "EHCI: unrecognized capability " |
5c853013 | 656 | "%02x\n", cap & 0xff); |
7586269c | 657 | } |
401feafa | 658 | offset = (cap >> 8) & 0xff; |
7586269c | 659 | } |
401feafa | 660 | if (!count) |
f0fda801 | 661 | dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n"); |
7586269c DB |
662 | |
663 | /* | |
664 | * halt EHCI & disable its interrupts in any case | |
665 | */ | |
666 | val = readl(op_reg_base + EHCI_USBSTS); | |
667 | if ((val & EHCI_USBSTS_HALTED) == 0) { | |
668 | val = readl(op_reg_base + EHCI_USBCMD); | |
669 | val &= ~EHCI_USBCMD_RUN; | |
670 | writel(val, op_reg_base + EHCI_USBCMD); | |
671 | ||
672 | wait_time = 2000; | |
7586269c DB |
673 | do { |
674 | writel(0x3f, op_reg_base + EHCI_USBSTS); | |
97ff22ee AS |
675 | udelay(100); |
676 | wait_time -= 100; | |
7586269c DB |
677 | val = readl(op_reg_base + EHCI_USBSTS); |
678 | if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { | |
679 | break; | |
680 | } | |
681 | } while (wait_time > 0); | |
682 | } | |
683 | writel(0, op_reg_base + EHCI_USBINTR); | |
684 | writel(0x3f, op_reg_base + EHCI_USBSTS); | |
685 | ||
686 | iounmap(base); | |
7586269c DB |
687 | } |
688 | ||
66d4eadd SS |
689 | /* |
690 | * handshake - spin reading a register until handshake completes | |
691 | * @ptr: address of hc register to be read | |
692 | * @mask: bits to look at in result of read | |
693 | * @done: value of those bits when handshake succeeds | |
694 | * @wait_usec: timeout in microseconds | |
695 | * @delay_usec: delay in microseconds to wait between polling | |
696 | * | |
697 | * Polls a register every delay_usec microseconds. | |
698 | * Returns 0 when the mask bits have the value done. | |
699 | * Returns -ETIMEDOUT if this condition is not true after | |
700 | * wait_usec microseconds have passed. | |
701 | */ | |
702 | static int handshake(void __iomem *ptr, u32 mask, u32 done, | |
703 | int wait_usec, int delay_usec) | |
704 | { | |
705 | u32 result; | |
706 | ||
707 | do { | |
708 | result = readl(ptr); | |
709 | result &= mask; | |
710 | if (result == done) | |
711 | return 0; | |
712 | udelay(delay_usec); | |
713 | wait_usec -= delay_usec; | |
714 | } while (wait_usec > 0); | |
715 | return -ETIMEDOUT; | |
716 | } | |
717 | ||
1c12443a SS |
718 | #define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31 |
719 | ||
720 | bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev) | |
69e848c2 SS |
721 | { |
722 | return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && | |
723 | pdev->vendor == PCI_VENDOR_ID_INTEL && | |
724 | pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; | |
725 | } | |
1c12443a SS |
726 | |
727 | /* The Intel Lynx Point chipset also has switchable ports. */ | |
728 | bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev) | |
729 | { | |
730 | return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && | |
731 | pdev->vendor == PCI_VENDOR_ID_INTEL && | |
732 | pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI; | |
733 | } | |
734 | ||
735 | bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) | |
736 | { | |
737 | return usb_is_intel_ppt_switchable_xhci(pdev) || | |
738 | usb_is_intel_lpt_switchable_xhci(pdev); | |
739 | } | |
69e848c2 SS |
740 | EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); |
741 | ||
742 | /* | |
743 | * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that | |
744 | * share some number of ports. These ports can be switched between either | |
745 | * controller. Not all of the ports under the EHCI host controller may be | |
746 | * switchable. | |
747 | * | |
748 | * The ports should be switched over to xHCI before PCI probes for any device | |
749 | * start. This avoids active devices under EHCI being disconnected during the | |
750 | * port switchover, which could cause loss of data on USB storage devices, or | |
751 | * failed boot when the root file system is on a USB mass storage device and is | |
752 | * enumerated under EHCI first. | |
753 | * | |
754 | * We write into the xHC's PCI configuration space in some Intel-specific | |
755 | * registers to switch the ports over. The USB 3.0 terminations and the USB | |
756 | * 2.0 data wires are switched separately. We want to enable the SuperSpeed | |
757 | * terminations before switching the USB 2.0 wires over, so that USB 3.0 | |
758 | * devices connect at SuperSpeed, rather than at USB 2.0 speeds. | |
759 | */ | |
760 | void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) | |
761 | { | |
762 | u32 ports_available; | |
763 | ||
51c9e6c7 SS |
764 | /* Don't switchover the ports if the user hasn't compiled the xHCI |
765 | * driver. Otherwise they will see "dead" USB ports that don't power | |
766 | * the devices. | |
767 | */ | |
768 | if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) { | |
769 | dev_warn(&xhci_pdev->dev, | |
770 | "CONFIG_USB_XHCI_HCD is turned off, " | |
771 | "defaulting to EHCI.\n"); | |
772 | dev_warn(&xhci_pdev->dev, | |
773 | "USB 3.0 devices will work at USB 2.0 speeds.\n"); | |
774 | return; | |
775 | } | |
776 | ||
a96874a2 KYL |
777 | /* Read USB3PRM, the USB 3.0 Port Routing Mask Register |
778 | * Indicate the ports that can be changed from OS. | |
779 | */ | |
780 | pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM, | |
781 | &ports_available); | |
782 | ||
783 | dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n", | |
784 | ports_available); | |
785 | ||
69e848c2 | 786 | /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable |
a96874a2 KYL |
787 | * Register, to turn on SuperSpeed terminations for the |
788 | * switchable ports. | |
69e848c2 SS |
789 | */ |
790 | pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, | |
791 | cpu_to_le32(ports_available)); | |
792 | ||
793 | pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, | |
794 | &ports_available); | |
795 | dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " | |
796 | "under xHCI: 0x%x\n", ports_available); | |
797 | ||
a96874a2 KYL |
798 | /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register |
799 | * Indicate the USB 2.0 ports to be controlled by the xHCI host. | |
800 | */ | |
801 | ||
802 | pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM, | |
803 | &ports_available); | |
804 | ||
805 | dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n", | |
806 | ports_available); | |
807 | ||
69e848c2 SS |
808 | /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to |
809 | * switch the USB 2.0 power and data lines over to the xHCI | |
810 | * host. | |
811 | */ | |
812 | pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, | |
813 | cpu_to_le32(ports_available)); | |
814 | ||
815 | pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, | |
816 | &ports_available); | |
817 | dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over " | |
818 | "to xHCI: 0x%x\n", ports_available); | |
819 | } | |
820 | EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); | |
821 | ||
e95829f4 SS |
822 | void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) |
823 | { | |
824 | pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); | |
825 | pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); | |
826 | } | |
827 | EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); | |
828 | ||
66d4eadd SS |
829 | /** |
830 | * PCI Quirks for xHCI. | |
831 | * | |
832 | * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. | |
833 | * It signals to the BIOS that the OS wants control of the host controller, | |
834 | * and then waits 5 seconds for the BIOS to hand over control. | |
835 | * If we timeout, assume the BIOS is broken and take control anyway. | |
836 | */ | |
837 | static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) | |
838 | { | |
839 | void __iomem *base; | |
840 | int ext_cap_offset; | |
841 | void __iomem *op_reg_base; | |
842 | u32 val; | |
843 | int timeout; | |
e955a1cd | 844 | int len = pci_resource_len(pdev, 0); |
66d4eadd SS |
845 | |
846 | if (!mmio_resource_enabled(pdev, 0)) | |
847 | return; | |
848 | ||
e955a1cd | 849 | base = ioremap_nocache(pci_resource_start(pdev, 0), len); |
66d4eadd SS |
850 | if (base == NULL) |
851 | return; | |
7586269c | 852 | |
66d4eadd SS |
853 | /* |
854 | * Find the Legacy Support Capability register - | |
855 | * this is optional for xHCI host controllers. | |
856 | */ | |
857 | ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET); | |
858 | do { | |
e955a1cd MG |
859 | if ((ext_cap_offset + sizeof(val)) > len) { |
860 | /* We're reading garbage from the controller */ | |
861 | dev_warn(&pdev->dev, | |
862 | "xHCI controller failing to respond"); | |
863 | return; | |
864 | } | |
865 | ||
66d4eadd SS |
866 | if (!ext_cap_offset) |
867 | /* We've reached the end of the extended capabilities */ | |
868 | goto hc_init; | |
e955a1cd | 869 | |
66d4eadd SS |
870 | val = readl(base + ext_cap_offset); |
871 | if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY) | |
872 | break; | |
873 | ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset); | |
874 | } while (1); | |
875 | ||
876 | /* If the BIOS owns the HC, signal that the OS wants it, and wait */ | |
877 | if (val & XHCI_HC_BIOS_OWNED) { | |
6768458b | 878 | writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); |
66d4eadd SS |
879 | |
880 | /* Wait for 5 seconds with 10 microsecond polling interval */ | |
881 | timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, | |
882 | 0, 5000, 10); | |
883 | ||
884 | /* Assume a buggy BIOS and take HC ownership anyway */ | |
885 | if (timeout) { | |
886 | dev_warn(&pdev->dev, "xHCI BIOS handoff failed" | |
887 | " (BIOS bug ?) %08x\n", val); | |
888 | writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset); | |
889 | } | |
890 | } | |
891 | ||
95018a53 AH |
892 | val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); |
893 | /* Mask off (turn off) any enabled SMIs */ | |
894 | val &= XHCI_LEGACY_DISABLE_SMI; | |
895 | /* Mask all SMI events bits, RW1C */ | |
896 | val |= XHCI_LEGACY_SMI_EVENTS; | |
897 | /* Disable any BIOS SMIs and clear all SMI events*/ | |
898 | writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); | |
66d4eadd | 899 | |
29d21457 | 900 | hc_init: |
69e848c2 SS |
901 | if (usb_is_intel_switchable_xhci(pdev)) |
902 | usb_enable_xhci_ports(pdev); | |
29d21457 | 903 | |
66d4eadd SS |
904 | op_reg_base = base + XHCI_HC_LENGTH(readl(base)); |
905 | ||
906 | /* Wait for the host controller to be ready before writing any | |
907 | * operational or runtime registers. Wait 5 seconds and no more. | |
908 | */ | |
909 | timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0, | |
910 | 5000, 10); | |
911 | /* Assume a buggy HC and start HC initialization anyway */ | |
912 | if (timeout) { | |
913 | val = readl(op_reg_base + XHCI_STS_OFFSET); | |
914 | dev_warn(&pdev->dev, | |
915 | "xHCI HW not ready after 5 sec (HC bug?) " | |
916 | "status = 0x%x\n", val); | |
917 | } | |
918 | ||
919 | /* Send the halt and disable interrupts command */ | |
920 | val = readl(op_reg_base + XHCI_CMD_OFFSET); | |
921 | val &= ~(XHCI_CMD_RUN | XHCI_IRQS); | |
922 | writel(val, op_reg_base + XHCI_CMD_OFFSET); | |
923 | ||
924 | /* Wait for the HC to halt - poll every 125 usec (one microframe). */ | |
925 | timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1, | |
926 | XHCI_MAX_HALT_USEC, 125); | |
927 | if (timeout) { | |
928 | val = readl(op_reg_base + XHCI_STS_OFFSET); | |
929 | dev_warn(&pdev->dev, | |
930 | "xHCI HW did not halt within %d usec " | |
931 | "status = 0x%x\n", XHCI_MAX_HALT_USEC, val); | |
932 | } | |
933 | ||
934 | iounmap(base); | |
935 | } | |
7586269c DB |
936 | |
937 | static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) | |
938 | { | |
e4436a7c J |
939 | /* Skip Netlogic mips SoC's internal PCI USB controller. |
940 | * This device does not need/support EHCI/OHCI handoff | |
941 | */ | |
942 | if (pdev->vendor == 0x184e) /* vendor Netlogic */ | |
943 | return; | |
cab928ee SS |
944 | if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && |
945 | pdev->class != PCI_CLASS_SERIAL_USB_OHCI && | |
946 | pdev->class != PCI_CLASS_SERIAL_USB_EHCI && | |
947 | pdev->class != PCI_CLASS_SERIAL_USB_XHCI) | |
948 | return; | |
e4436a7c | 949 | |
cab928ee SS |
950 | if (pci_enable_device(pdev) < 0) { |
951 | dev_warn(&pdev->dev, "Can't enable PCI device, " | |
952 | "BIOS handoff failed.\n"); | |
953 | return; | |
954 | } | |
478a3bab | 955 | if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) |
7586269c | 956 | quirk_usb_handoff_uhci(pdev); |
478a3bab | 957 | else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) |
7586269c | 958 | quirk_usb_handoff_ohci(pdev); |
478a3bab | 959 | else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI) |
7586269c | 960 | quirk_usb_disable_ehci(pdev); |
66d4eadd SS |
961 | else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) |
962 | quirk_usb_handoff_xhci(pdev); | |
cab928ee | 963 | pci_disable_device(pdev); |
7586269c | 964 | } |
8474ecd9 YL |
965 | DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, |
966 | PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); |