Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Native support for the Aiptek HyperPen USB Tablets | |
3 | * (4000U/5000U/6000U/8000U/12000U) | |
05f091ab | 4 | * |
1da177e4 LT |
5 | * Copyright (c) 2001 Chris Atenasio <chris@crud.net> |
6 | * Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net> | |
7 | * | |
8 | * based on wacom.c by | |
9 | * Vojtech Pavlik <vojtech@suse.cz> | |
10 | * Andreas Bach Aaen <abach@stofanet.dk> | |
11 | * Clifford Wolf <clifford@clifford.at> | |
12 | * Sam Mosel <sam.mosel@computer.org> | |
13 | * James E. Blair <corvus@gnu.org> | |
14 | * Daniel Egger <egger@suse.de> | |
15 | * | |
16 | * Many thanks to Oliver Kuechemann for his support. | |
17 | * | |
18 | * ChangeLog: | |
19 | * v0.1 - Initial release | |
20 | * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley) | |
21 | * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002) | |
22 | * Released to Linux 2.4.19 and 2.5.x | |
23 | * v0.4 - Rewrote substantial portions of the code to deal with | |
24 | * corrected control sequences, timing, dynamic configuration, | |
25 | * support of 6000U - 12000U, procfs, and macro key support | |
26 | * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley) | |
27 | * v1.0 - Added support for diagnostic messages, count of messages | |
28 | * received from URB - Mar-8-2003, Bryan W. Headley | |
29 | * v1.1 - added support for tablet resolution, changed DV and proximity | |
30 | * some corrections - Jun-22-2003, martin schneebacher | |
31 | * - Added support for the sysfs interface, deprecating the | |
32 | * procfs interface for 2.5.x kernel. Also added support for | |
33 | * Wheel command. Bryan W. Headley July-15-2003. | |
05f091ab | 34 | * v1.2 - Reworked jitter timer as a kernel thread. |
1da177e4 LT |
35 | * Bryan W. Headley November-28-2003/Jan-10-2004. |
36 | * v1.3 - Repaired issue of kernel thread going nuts on single-processor | |
37 | * machines, introduced programmableDelay as a command line | |
38 | * parameter. Feb 7 2004, Bryan W. Headley. | |
39 | * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of | |
40 | * Rene van Paassen. Added reporting of physical pointer device | |
41 | * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know | |
42 | * for reports 1, 6.) | |
43 | * what physical device reports for reports 1, 6.) Also enabled | |
44 | * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser". | |
45 | * Feb 20, 2004, Bryan W. Headley. | |
46 | * v1.5 - Added previousJitterable, so we don't do jitter delay when the | |
47 | * user is holding a button down for periods of time. | |
48 | * | |
49 | * NOTE: | |
50 | * This kernel driver is augmented by the "Aiptek" XFree86 input | |
51 | * driver for your X server, as well as the Gaiptek GUI Front-end | |
05f091ab DT |
52 | * "Tablet Manager". |
53 | * These three products are highly interactive with one another, | |
1da177e4 | 54 | * so therefore it's easier to document them all as one subsystem. |
05f091ab | 55 | * Please visit the project's "home page", located at, |
1da177e4 LT |
56 | * http://aiptektablet.sourceforge.net. |
57 | * | |
58 | * This program is free software; you can redistribute it and/or modify | |
59 | * it under the terms of the GNU General Public License as published by | |
60 | * the Free Software Foundation; either version 2 of the License, or | |
61 | * (at your option) any later version. | |
62 | * | |
63 | * This program is distributed in the hope that it will be useful, | |
64 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
65 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
66 | * GNU General Public License for more details. | |
67 | * | |
68 | * You should have received a copy of the GNU General Public License | |
69 | * along with this program; if not, write to the Free Software | |
70 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
71 | */ | |
72 | ||
73 | #include <linux/jiffies.h> | |
74 | #include <linux/kernel.h> | |
75 | #include <linux/slab.h> | |
76 | #include <linux/input.h> | |
77 | #include <linux/module.h> | |
78 | #include <linux/init.h> | |
79 | #include <linux/usb.h> | |
16a334c0 | 80 | #include <linux/usb_input.h> |
1da177e4 LT |
81 | #include <linux/sched.h> |
82 | #include <asm/uaccess.h> | |
83 | #include <asm/unaligned.h> | |
84 | ||
85 | /* | |
86 | * Version Information | |
87 | */ | |
88 | #define DRIVER_VERSION "v1.5 (May-15-2004)" | |
89 | #define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio" | |
90 | #define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" | |
91 | ||
92 | /* | |
93 | * Aiptek status packet: | |
94 | * | |
95 | * (returned as Report 1 - relative coordinates from mouse and stylus) | |
96 | * | |
97 | * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 | |
98 | * byte0 0 0 0 0 0 0 0 1 | |
99 | * byte1 0 0 0 0 0 BS2 BS Tip | |
100 | * byte2 X7 X6 X5 X4 X3 X2 X1 X0 | |
101 | * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 | |
102 | * | |
103 | * (returned as Report 2 - absolute coordinates from the stylus) | |
104 | * | |
105 | * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 | |
106 | * byte0 0 0 0 0 0 0 1 0 | |
107 | * byte1 X7 X6 X5 X4 X3 X2 X1 X0 | |
108 | * byte2 X15 X14 X13 X12 X11 X10 X9 X8 | |
109 | * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 | |
110 | * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 | |
111 | * byte5 * * * BS2 BS1 Tip IR DV | |
112 | * byte6 P7 P6 P5 P4 P3 P2 P1 P0 | |
113 | * byte7 P15 P14 P13 P12 P11 P10 P9 P8 | |
114 | * | |
115 | * (returned as Report 3 - absolute coordinates from the mouse) | |
116 | * | |
117 | * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 | |
118 | * byte0 0 0 0 0 0 0 1 0 | |
119 | * byte1 X7 X6 X5 X4 X3 X2 X1 X0 | |
120 | * byte2 X15 X14 X13 X12 X11 X10 X9 X8 | |
121 | * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 | |
122 | * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 | |
123 | * byte5 * * * BS2 BS1 Tip IR DV | |
124 | * byte6 P7 P6 P5 P4 P3 P2 P1 P0 | |
125 | * byte7 P15 P14 P13 P12 P11 P10 P9 P8 | |
126 | * | |
127 | * (returned as Report 4 - macrokeys from the stylus) | |
128 | * | |
129 | * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 | |
130 | * byte0 0 0 0 0 0 1 0 0 | |
131 | * byte1 0 0 0 BS2 BS Tip IR DV | |
132 | * byte2 0 0 0 0 0 0 1 0 | |
133 | * byte3 0 0 0 K4 K3 K2 K1 K0 | |
134 | * byte4 P7 P6 P5 P4 P3 P2 P1 P0 | |
135 | * byte5 P15 P14 P13 P12 P11 P10 P9 P8 | |
136 | * | |
137 | * (returned as Report 5 - macrokeys from the mouse) | |
138 | * | |
139 | * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 | |
140 | * byte0 0 0 0 0 0 1 0 0 | |
141 | * byte1 0 0 0 BS2 BS Tip IR DV | |
142 | * byte2 0 0 0 0 0 0 1 0 | |
143 | * byte3 0 0 0 K4 K3 K2 K1 K0 | |
144 | * byte4 P7 P6 P5 P4 P3 P2 P1 P0 | |
145 | * byte5 P15 P14 P13 P12 P11 P10 P9 P8 | |
146 | * | |
147 | * IR: In Range = Proximity on | |
148 | * DV = Data Valid | |
149 | * BS = Barrel Switch (as in, macro keys) | |
150 | * BS2 also referred to as Tablet Pick | |
151 | * | |
152 | * Command Summary: | |
153 | * | |
154 | * Use report_type CONTROL (3) | |
155 | * Use report_id 2 | |
156 | * | |
157 | * Command/Data Description Return Bytes Return Value | |
158 | * 0x10/0x00 SwitchToMouse 0 | |
159 | * 0x10/0x01 SwitchToTablet 0 | |
05f091ab | 160 | * 0x18/0x04 SetResolution 0 |
1da177e4 LT |
161 | * 0x12/0xFF AutoGainOn 0 |
162 | * 0x17/0x00 FilterOn 0 | |
163 | * 0x01/0x00 GetXExtension 2 MaxX | |
164 | * 0x01/0x01 GetYExtension 2 MaxY | |
165 | * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE | |
166 | * 0x03/0x00 GetODMCode 2 ODMCode | |
167 | * 0x08/0x00 GetPressureLevels 2 =512 | |
168 | * 0x04/0x00 GetFirmwareVersion 2 Firmware Version | |
169 | * 0x11/0x02 EnableMacroKeys 0 | |
170 | * | |
171 | * To initialize the tablet: | |
172 | * | |
173 | * (1) Send Resolution500LPI (Command) | |
174 | * (2) Query for Model code (Option Report) | |
175 | * (3) Query for ODM code (Option Report) | |
176 | * (4) Query for firmware (Option Report) | |
177 | * (5) Query for GetXExtension (Option Report) | |
178 | * (6) Query for GetYExtension (Option Report) | |
179 | * (7) Query for GetPressureLevels (Option Report) | |
180 | * (8) SwitchToTablet for Absolute coordinates, or | |
181 | * SwitchToMouse for Relative coordinates (Command) | |
182 | * (9) EnableMacroKeys (Command) | |
183 | * (10) FilterOn (Command) | |
184 | * (11) AutoGainOn (Command) | |
185 | * | |
186 | * (Step 9 can be omitted, but you'll then have no function keys.) | |
187 | */ | |
188 | ||
189 | #define USB_VENDOR_ID_AIPTEK 0x08ca | |
190 | #define USB_REQ_GET_REPORT 0x01 | |
191 | #define USB_REQ_SET_REPORT 0x09 | |
192 | ||
193 | /* PointerMode codes | |
194 | */ | |
195 | #define AIPTEK_POINTER_ONLY_MOUSE_MODE 0 | |
196 | #define AIPTEK_POINTER_ONLY_STYLUS_MODE 1 | |
197 | #define AIPTEK_POINTER_EITHER_MODE 2 | |
198 | ||
199 | #define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \ | |
200 | (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \ | |
201 | a == AIPTEK_POINTER_EITHER_MODE) | |
202 | #define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \ | |
203 | (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \ | |
204 | a == AIPTEK_POINTER_EITHER_MODE) | |
205 | ||
206 | /* CoordinateMode code | |
207 | */ | |
208 | #define AIPTEK_COORDINATE_RELATIVE_MODE 0 | |
209 | #define AIPTEK_COORDINATE_ABSOLUTE_MODE 1 | |
210 | ||
211 | /* XTilt and YTilt values | |
212 | */ | |
213 | #define AIPTEK_TILT_MIN (-128) | |
214 | #define AIPTEK_TILT_MAX 127 | |
215 | #define AIPTEK_TILT_DISABLE (-10101) | |
216 | ||
217 | /* Wheel values | |
218 | */ | |
219 | #define AIPTEK_WHEEL_MIN 0 | |
220 | #define AIPTEK_WHEEL_MAX 1024 | |
221 | #define AIPTEK_WHEEL_DISABLE (-10101) | |
222 | ||
223 | /* ToolCode values, which BTW are 0x140 .. 0x14f | |
224 | * We have things set up such that if TOOL_BUTTON_FIRED_BIT is | |
225 | * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx. | |
226 | * | |
227 | * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will | |
228 | * get reset. | |
229 | */ | |
230 | #define TOOL_BUTTON(x) ((x) & 0x14f) | |
231 | #define TOOL_BUTTON_FIRED(x) ((x) & 0x200) | |
232 | #define TOOL_BUTTON_FIRED_BIT 0x200 | |
233 | /* toolMode codes | |
234 | */ | |
235 | #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN | |
236 | #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN | |
237 | #define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL | |
238 | #define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH | |
239 | #define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH | |
240 | #define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER | |
241 | #define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE | |
242 | #define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS | |
243 | ||
244 | /* Diagnostic message codes | |
245 | */ | |
246 | #define AIPTEK_DIAGNOSTIC_NA 0 | |
247 | #define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1 | |
248 | #define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2 | |
249 | #define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3 | |
250 | ||
05f091ab | 251 | /* Time to wait (in ms) to help mask hand jittering |
1da177e4 LT |
252 | * when pressing the stylus buttons. |
253 | */ | |
254 | #define AIPTEK_JITTER_DELAY_DEFAULT 50 | |
255 | ||
256 | /* Time to wait (in ms) in-between sending the tablet | |
257 | * a command and beginning the process of reading the return | |
258 | * sequence from the tablet. | |
259 | */ | |
260 | #define AIPTEK_PROGRAMMABLE_DELAY_25 25 | |
261 | #define AIPTEK_PROGRAMMABLE_DELAY_50 50 | |
262 | #define AIPTEK_PROGRAMMABLE_DELAY_100 100 | |
263 | #define AIPTEK_PROGRAMMABLE_DELAY_200 200 | |
264 | #define AIPTEK_PROGRAMMABLE_DELAY_300 300 | |
265 | #define AIPTEK_PROGRAMMABLE_DELAY_400 400 | |
266 | #define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400 | |
267 | ||
268 | /* Mouse button programming | |
269 | */ | |
270 | #define AIPTEK_MOUSE_LEFT_BUTTON 0x01 | |
271 | #define AIPTEK_MOUSE_RIGHT_BUTTON 0x02 | |
272 | #define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04 | |
273 | ||
274 | /* Stylus button programming | |
275 | */ | |
276 | #define AIPTEK_STYLUS_LOWER_BUTTON 0x08 | |
277 | #define AIPTEK_STYLUS_UPPER_BUTTON 0x10 | |
278 | ||
279 | /* Length of incoming packet from the tablet | |
280 | */ | |
281 | #define AIPTEK_PACKET_LENGTH 8 | |
282 | ||
283 | /* We report in EV_MISC both the proximity and | |
284 | * whether the report came from the stylus, tablet mouse | |
285 | * or "unknown" -- Unknown when the tablet is in relative | |
286 | * mode, because we only get report 1's. | |
287 | */ | |
288 | #define AIPTEK_REPORT_TOOL_UNKNOWN 0x10 | |
289 | #define AIPTEK_REPORT_TOOL_STYLUS 0x20 | |
290 | #define AIPTEK_REPORT_TOOL_MOUSE 0x40 | |
291 | ||
292 | static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT; | |
293 | static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT; | |
294 | ||
295 | struct aiptek_features { | |
296 | int odmCode; /* Tablet manufacturer code */ | |
297 | int modelCode; /* Tablet model code (not unique) */ | |
298 | int firmwareCode; /* prom/eeprom version */ | |
299 | char usbPath[64 + 1]; /* device's physical usb path */ | |
300 | char inputPath[64 + 1]; /* input device path */ | |
301 | }; | |
302 | ||
303 | struct aiptek_settings { | |
304 | int pointerMode; /* stylus-, mouse-only or either */ | |
305 | int coordinateMode; /* absolute/relative coords */ | |
306 | int toolMode; /* pen, pencil, brush, etc. tool */ | |
307 | int xTilt; /* synthetic xTilt amount */ | |
308 | int yTilt; /* synthetic yTilt amount */ | |
309 | int wheel; /* synthetic wheel amount */ | |
310 | int stylusButtonUpper; /* stylus upper btn delivers... */ | |
311 | int stylusButtonLower; /* stylus lower btn delivers... */ | |
312 | int mouseButtonLeft; /* mouse left btn delivers... */ | |
313 | int mouseButtonMiddle; /* mouse middle btn delivers... */ | |
314 | int mouseButtonRight; /* mouse right btn delivers... */ | |
315 | int programmableDelay; /* delay for tablet programming */ | |
316 | int jitterDelay; /* delay for hand jittering */ | |
317 | }; | |
318 | ||
319 | struct aiptek { | |
320 | struct input_dev inputdev; /* input device struct */ | |
321 | struct usb_device *usbdev; /* usb device struct */ | |
322 | struct urb *urb; /* urb for incoming reports */ | |
323 | dma_addr_t data_dma; /* our dma stuffage */ | |
324 | struct aiptek_features features; /* tablet's array of features */ | |
325 | struct aiptek_settings curSetting; /* tablet's current programmable */ | |
326 | struct aiptek_settings newSetting; /* ... and new param settings */ | |
327 | unsigned int ifnum; /* interface number for IO */ | |
1da177e4 LT |
328 | int diagnostic; /* tablet diagnostic codes */ |
329 | unsigned long eventCount; /* event count */ | |
330 | int inDelay; /* jitter: in jitter delay? */ | |
331 | unsigned long endDelay; /* jitter: time when delay ends */ | |
332 | int previousJitterable; /* jitterable prev value */ | |
333 | unsigned char *data; /* incoming packet data */ | |
334 | }; | |
335 | ||
336 | /* | |
337 | * Permit easy lookup of keyboard events to send, versus | |
338 | * the bitmap which comes from the tablet. This hides the | |
339 | * issue that the F_keys are not sequentially numbered. | |
340 | */ | |
341 | static int macroKeyEvents[] = { | |
342 | KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, | |
343 | KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, | |
344 | KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, | |
345 | KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, | |
346 | KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO, | |
347 | KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0 | |
348 | }; | |
349 | ||
350 | /*********************************************************************** | |
351 | * Relative reports deliver values in 2's complement format to | |
352 | * deal with negative offsets. | |
353 | */ | |
354 | static int aiptek_convert_from_2s_complement(unsigned char c) | |
355 | { | |
356 | int ret; | |
357 | unsigned char b = c; | |
358 | int negate = 0; | |
359 | ||
360 | if ((b & 0x80) != 0) { | |
361 | b = ~b; | |
362 | b--; | |
363 | negate = 1; | |
364 | } | |
365 | ret = b; | |
366 | ret = (negate == 1) ? -ret : ret; | |
367 | return ret; | |
368 | } | |
369 | ||
370 | /*********************************************************************** | |
371 | * aiptek_irq can receive one of six potential reports. | |
372 | * The documentation for each is in the body of the function. | |
373 | * | |
374 | * The tablet reports on several attributes per invocation of | |
375 | * aiptek_irq. Because the Linux Input Event system allows the | |
376 | * transmission of ONE attribute per input_report_xxx() call, | |
377 | * collation has to be done on the other end to reconstitute | |
378 | * a complete tablet report. Further, the number of Input Event reports | |
379 | * submitted varies, depending on what USB report type, and circumstance. | |
380 | * To deal with this, EV_MSC is used to indicate an 'end-of-report' | |
381 | * message. This has been an undocumented convention understood by the kernel | |
382 | * tablet driver and clients such as gpm and XFree86's tablet drivers. | |
383 | * | |
384 | * Of the information received from the tablet, the one piece I | |
385 | * cannot transmit is the proximity bit (without resorting to an EV_MSC | |
386 | * convention above.) I therefore have taken over REL_MISC and ABS_MISC | |
387 | * (for relative and absolute reports, respectively) for communicating | |
388 | * Proximity. Why two events? I thought it interesting to know if the | |
093cf723 | 389 | * Proximity event occurred while the tablet was in absolute or relative |
1da177e4 LT |
390 | * mode. |
391 | * | |
392 | * Other tablets use the notion of a certain minimum stylus pressure | |
393 | * to infer proximity. While that could have been done, that is yet | |
394 | * another 'by convention' behavior, the documentation for which | |
395 | * would be spread between two (or more) pieces of software. | |
396 | * | |
397 | * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and | |
398 | * replaced with the input_sync() method (which emits EV_SYN.) | |
399 | */ | |
400 | ||
401 | static void aiptek_irq(struct urb *urb, struct pt_regs *regs) | |
402 | { | |
403 | struct aiptek *aiptek = urb->context; | |
404 | unsigned char *data = aiptek->data; | |
405 | struct input_dev *inputdev = &aiptek->inputdev; | |
406 | int jitterable = 0; | |
407 | int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; | |
408 | ||
409 | switch (urb->status) { | |
410 | case 0: | |
411 | /* Success */ | |
412 | break; | |
413 | ||
414 | case -ECONNRESET: | |
415 | case -ENOENT: | |
416 | case -ESHUTDOWN: | |
417 | /* This urb is terminated, clean up */ | |
418 | dbg("%s - urb shutting down with status: %d", | |
419 | __FUNCTION__, urb->status); | |
420 | return; | |
421 | ||
422 | default: | |
423 | dbg("%s - nonzero urb status received: %d", | |
424 | __FUNCTION__, urb->status); | |
425 | goto exit; | |
426 | } | |
427 | ||
428 | /* See if we are in a delay loop -- throw out report if true. | |
429 | */ | |
430 | if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) { | |
431 | goto exit; | |
432 | } | |
433 | ||
434 | aiptek->inDelay = 0; | |
435 | aiptek->eventCount++; | |
436 | ||
437 | /* Report 1 delivers relative coordinates with either a stylus | |
438 | * or the mouse. You do not know, however, which input | |
439 | * tool generated the event. | |
440 | */ | |
441 | if (data[0] == 1) { | |
442 | if (aiptek->curSetting.coordinateMode == | |
443 | AIPTEK_COORDINATE_ABSOLUTE_MODE) { | |
444 | aiptek->diagnostic = | |
445 | AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; | |
446 | } else { | |
447 | input_regs(inputdev, regs); | |
448 | ||
449 | x = aiptek_convert_from_2s_complement(data[2]); | |
450 | y = aiptek_convert_from_2s_complement(data[3]); | |
451 | ||
452 | /* jitterable keeps track of whether any button has been pressed. | |
453 | * We're also using it to remap the physical mouse button mask | |
454 | * to pseudo-settings. (We don't specifically care about it's | |
455 | * value after moving/transposing mouse button bitmasks, except | |
456 | * that a non-zero value indicates that one or more | |
457 | * mouse button was pressed.) | |
458 | */ | |
459 | jitterable = data[5] & 0x07; | |
460 | ||
461 | left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; | |
462 | right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; | |
463 | middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; | |
464 | ||
465 | input_report_key(inputdev, BTN_LEFT, left); | |
466 | input_report_key(inputdev, BTN_MIDDLE, middle); | |
467 | input_report_key(inputdev, BTN_RIGHT, right); | |
468 | input_report_rel(inputdev, REL_X, x); | |
469 | input_report_rel(inputdev, REL_Y, y); | |
470 | input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN); | |
471 | ||
472 | /* Wheel support is in the form of a single-event | |
473 | * firing. | |
474 | */ | |
475 | if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { | |
476 | input_report_rel(inputdev, REL_WHEEL, | |
477 | aiptek->curSetting.wheel); | |
478 | aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; | |
479 | } | |
480 | input_sync(inputdev); | |
481 | } | |
482 | } | |
483 | /* Report 2 is delivered only by the stylus, and delivers | |
484 | * absolute coordinates. | |
485 | */ | |
486 | else if (data[0] == 2) { | |
487 | if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { | |
488 | aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; | |
489 | } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE | |
490 | (aiptek->curSetting.pointerMode)) { | |
491 | aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; | |
492 | } else { | |
493 | input_regs(inputdev, regs); | |
494 | ||
495 | x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); | |
496 | y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); | |
497 | z = le16_to_cpu(get_unaligned((__le16 *) (data + 6))); | |
498 | ||
499 | p = (data[5] & 0x01) != 0 ? 1 : 0; | |
500 | dv = (data[5] & 0x02) != 0 ? 1 : 0; | |
501 | tip = (data[5] & 0x04) != 0 ? 1 : 0; | |
502 | ||
503 | /* Use jitterable to re-arrange button masks | |
504 | */ | |
505 | jitterable = data[5] & 0x18; | |
506 | ||
507 | bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; | |
508 | pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; | |
509 | ||
510 | /* dv indicates 'data valid' (e.g., the tablet is in sync | |
511 | * and has delivered a "correct" report) We will ignore | |
512 | * all 'bad' reports... | |
513 | */ | |
514 | if (dv != 0) { | |
515 | /* If we've not already sent a tool_button_?? code, do | |
516 | * so now. Then set FIRED_BIT so it won't be resent unless | |
517 | * the user forces FIRED_BIT off. | |
518 | */ | |
519 | if (TOOL_BUTTON_FIRED | |
520 | (aiptek->curSetting.toolMode) == 0) { | |
521 | input_report_key(inputdev, | |
522 | TOOL_BUTTON(aiptek->curSetting.toolMode), | |
523 | 1); | |
524 | aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; | |
525 | } | |
526 | ||
527 | if (p != 0) { | |
528 | input_report_abs(inputdev, ABS_X, x); | |
529 | input_report_abs(inputdev, ABS_Y, y); | |
530 | input_report_abs(inputdev, ABS_PRESSURE, z); | |
531 | ||
532 | input_report_key(inputdev, BTN_TOUCH, tip); | |
533 | input_report_key(inputdev, BTN_STYLUS, bs); | |
534 | input_report_key(inputdev, BTN_STYLUS2, pck); | |
535 | ||
536 | if (aiptek->curSetting.xTilt != | |
537 | AIPTEK_TILT_DISABLE) { | |
538 | input_report_abs(inputdev, | |
539 | ABS_TILT_X, | |
540 | aiptek->curSetting.xTilt); | |
541 | } | |
542 | if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) { | |
543 | input_report_abs(inputdev, | |
544 | ABS_TILT_Y, | |
545 | aiptek->curSetting.yTilt); | |
546 | } | |
547 | ||
548 | /* Wheel support is in the form of a single-event | |
549 | * firing. | |
550 | */ | |
551 | if (aiptek->curSetting.wheel != | |
552 | AIPTEK_WHEEL_DISABLE) { | |
553 | input_report_abs(inputdev, | |
554 | ABS_WHEEL, | |
555 | aiptek->curSetting.wheel); | |
556 | aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; | |
557 | } | |
558 | } | |
559 | input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); | |
560 | input_sync(inputdev); | |
561 | } | |
562 | } | |
563 | } | |
564 | /* Report 3's come from the mouse in absolute mode. | |
565 | */ | |
566 | else if (data[0] == 3) { | |
567 | if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { | |
568 | aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; | |
569 | } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE | |
570 | (aiptek->curSetting.pointerMode)) { | |
571 | aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; | |
572 | } else { | |
573 | input_regs(inputdev, regs); | |
574 | x = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); | |
575 | y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); | |
576 | ||
577 | jitterable = data[5] & 0x1c; | |
578 | ||
579 | p = (data[5] & 0x01) != 0 ? 1 : 0; | |
580 | dv = (data[5] & 0x02) != 0 ? 1 : 0; | |
581 | left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; | |
582 | right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; | |
583 | middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; | |
584 | ||
585 | if (dv != 0) { | |
586 | /* If we've not already sent a tool_button_?? code, do | |
587 | * so now. Then set FIRED_BIT so it won't be resent unless | |
588 | * the user forces FIRED_BIT off. | |
589 | */ | |
590 | if (TOOL_BUTTON_FIRED | |
591 | (aiptek->curSetting.toolMode) == 0) { | |
592 | input_report_key(inputdev, | |
593 | TOOL_BUTTON(aiptek->curSetting.toolMode), | |
594 | 1); | |
595 | aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; | |
596 | } | |
597 | ||
598 | if (p != 0) { | |
599 | input_report_abs(inputdev, ABS_X, x); | |
600 | input_report_abs(inputdev, ABS_Y, y); | |
601 | ||
602 | input_report_key(inputdev, BTN_LEFT, left); | |
603 | input_report_key(inputdev, BTN_MIDDLE, middle); | |
604 | input_report_key(inputdev, BTN_RIGHT, right); | |
605 | ||
606 | /* Wheel support is in the form of a single-event | |
607 | * firing. | |
608 | */ | |
609 | if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { | |
610 | input_report_abs(inputdev, | |
611 | ABS_WHEEL, | |
612 | aiptek->curSetting.wheel); | |
613 | aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; | |
614 | } | |
615 | } | |
616 | input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); | |
617 | input_sync(inputdev); | |
618 | } | |
619 | } | |
620 | } | |
621 | /* Report 4s come from the macro keys when pressed by stylus | |
622 | */ | |
623 | else if (data[0] == 4) { | |
624 | jitterable = data[1] & 0x18; | |
625 | ||
626 | p = (data[1] & 0x01) != 0 ? 1 : 0; | |
627 | dv = (data[1] & 0x02) != 0 ? 1 : 0; | |
628 | tip = (data[1] & 0x04) != 0 ? 1 : 0; | |
629 | bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; | |
630 | pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; | |
631 | ||
632 | macro = data[3]; | |
633 | z = le16_to_cpu(get_unaligned((__le16 *) (data + 4))); | |
634 | ||
635 | if (dv != 0) { | |
636 | input_regs(inputdev, regs); | |
637 | ||
638 | /* If we've not already sent a tool_button_?? code, do | |
639 | * so now. Then set FIRED_BIT so it won't be resent unless | |
640 | * the user forces FIRED_BIT off. | |
641 | */ | |
642 | if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { | |
643 | input_report_key(inputdev, | |
644 | TOOL_BUTTON(aiptek->curSetting.toolMode), | |
645 | 1); | |
646 | aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; | |
647 | } | |
648 | ||
649 | if (p != 0) { | |
650 | input_report_key(inputdev, BTN_TOUCH, tip); | |
651 | input_report_key(inputdev, BTN_STYLUS, bs); | |
652 | input_report_key(inputdev, BTN_STYLUS2, pck); | |
653 | input_report_abs(inputdev, ABS_PRESSURE, z); | |
654 | } | |
655 | ||
656 | /* For safety, we're sending key 'break' codes for the | |
657 | * neighboring macro keys. | |
658 | */ | |
659 | if (macro > 0) { | |
660 | input_report_key(inputdev, | |
661 | macroKeyEvents[macro - 1], 0); | |
662 | } | |
663 | if (macro < 25) { | |
664 | input_report_key(inputdev, | |
665 | macroKeyEvents[macro + 1], 0); | |
666 | } | |
667 | input_report_key(inputdev, macroKeyEvents[macro], p); | |
668 | input_report_abs(inputdev, ABS_MISC, | |
669 | p | AIPTEK_REPORT_TOOL_STYLUS); | |
670 | input_sync(inputdev); | |
671 | } | |
672 | } | |
673 | /* Report 5s come from the macro keys when pressed by mouse | |
674 | */ | |
675 | else if (data[0] == 5) { | |
676 | jitterable = data[1] & 0x1c; | |
677 | ||
678 | p = (data[1] & 0x01) != 0 ? 1 : 0; | |
679 | dv = (data[1] & 0x02) != 0 ? 1 : 0; | |
680 | left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; | |
681 | right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; | |
682 | middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; | |
683 | macro = data[3]; | |
684 | ||
685 | if (dv != 0) { | |
686 | input_regs(inputdev, regs); | |
687 | ||
688 | /* If we've not already sent a tool_button_?? code, do | |
689 | * so now. Then set FIRED_BIT so it won't be resent unless | |
690 | * the user forces FIRED_BIT off. | |
691 | */ | |
692 | if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { | |
693 | input_report_key(inputdev, | |
694 | TOOL_BUTTON(aiptek->curSetting.toolMode), | |
695 | 1); | |
696 | aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; | |
697 | } | |
698 | ||
699 | if (p != 0) { | |
700 | input_report_key(inputdev, BTN_LEFT, left); | |
701 | input_report_key(inputdev, BTN_MIDDLE, middle); | |
702 | input_report_key(inputdev, BTN_RIGHT, right); | |
703 | } | |
704 | ||
705 | /* For safety, we're sending key 'break' codes for the | |
706 | * neighboring macro keys. | |
707 | */ | |
708 | if (macro > 0) { | |
709 | input_report_key(inputdev, | |
710 | macroKeyEvents[macro - 1], 0); | |
711 | } | |
712 | if (macro < 25) { | |
713 | input_report_key(inputdev, | |
714 | macroKeyEvents[macro + 1], 0); | |
715 | } | |
716 | ||
717 | input_report_key(inputdev, macroKeyEvents[macro], 1); | |
718 | input_report_rel(inputdev, ABS_MISC, | |
719 | p | AIPTEK_REPORT_TOOL_MOUSE); | |
720 | input_sync(inputdev); | |
721 | } | |
722 | } | |
723 | /* We have no idea which tool can generate a report 6. Theoretically, | |
724 | * neither need to, having been given reports 4 & 5 for such use. | |
725 | * However, report 6 is the 'official-looking' report for macroKeys; | |
726 | * reports 4 & 5 supposively are used to support unnamed, unknown | |
727 | * hat switches (which just so happen to be the macroKeys.) | |
728 | */ | |
729 | else if (data[0] == 6) { | |
730 | macro = le16_to_cpu(get_unaligned((__le16 *) (data + 1))); | |
731 | input_regs(inputdev, regs); | |
732 | ||
733 | if (macro > 0) { | |
734 | input_report_key(inputdev, macroKeyEvents[macro - 1], | |
735 | 0); | |
736 | } | |
737 | if (macro < 25) { | |
738 | input_report_key(inputdev, macroKeyEvents[macro + 1], | |
739 | 0); | |
740 | } | |
741 | ||
742 | /* If we've not already sent a tool_button_?? code, do | |
743 | * so now. Then set FIRED_BIT so it won't be resent unless | |
744 | * the user forces FIRED_BIT off. | |
745 | */ | |
746 | if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { | |
747 | input_report_key(inputdev, | |
748 | TOOL_BUTTON(aiptek->curSetting. | |
749 | toolMode), 1); | |
750 | aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; | |
751 | } | |
752 | ||
753 | input_report_key(inputdev, macroKeyEvents[macro], 1); | |
754 | input_report_abs(inputdev, ABS_MISC, | |
755 | 1 | AIPTEK_REPORT_TOOL_UNKNOWN); | |
756 | input_sync(inputdev); | |
757 | } else { | |
758 | dbg("Unknown report %d", data[0]); | |
759 | } | |
760 | ||
761 | /* Jitter may occur when the user presses a button on the stlyus | |
762 | * or the mouse. What we do to prevent that is wait 'x' milliseconds | |
763 | * following a 'jitterable' event, which should give the hand some time | |
764 | * stabilize itself. | |
765 | * | |
766 | * We just introduced aiptek->previousJitterable to carry forth the | |
767 | * notion that jitter occurs when the button state changes from on to off: | |
768 | * a person drawing, holding a button down is not subject to jittering. | |
769 | * With that in mind, changing from upper button depressed to lower button | |
770 | * WILL transition through a jitter delay. | |
771 | */ | |
772 | ||
773 | if (aiptek->previousJitterable != jitterable && | |
774 | aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) { | |
775 | aiptek->endDelay = jiffies + | |
776 | ((aiptek->curSetting.jitterDelay * HZ) / 1000); | |
777 | aiptek->inDelay = 1; | |
778 | } | |
779 | aiptek->previousJitterable = jitterable; | |
780 | ||
781 | exit: | |
782 | retval = usb_submit_urb(urb, GFP_ATOMIC); | |
783 | if (retval != 0) { | |
784 | err("%s - usb_submit_urb failed with result %d", | |
785 | __FUNCTION__, retval); | |
786 | } | |
787 | } | |
788 | ||
789 | /*********************************************************************** | |
790 | * These are the USB id's known so far. We do not identify them to | |
791 | * specific Aiptek model numbers, because there has been overlaps, | |
792 | * use, and reuse of id's in existing models. Certain models have | |
793 | * been known to use more than one ID, indicative perhaps of | |
05f091ab | 794 | * manufacturing revisions. In any event, we consider these |
1da177e4 LT |
795 | * IDs to not be model-specific nor unique. |
796 | */ | |
797 | static const struct usb_device_id aiptek_ids[] = { | |
798 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)}, | |
799 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)}, | |
800 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)}, | |
801 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)}, | |
802 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)}, | |
803 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)}, | |
804 | {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)}, | |
805 | {} | |
806 | }; | |
807 | ||
808 | MODULE_DEVICE_TABLE(usb, aiptek_ids); | |
809 | ||
810 | /*********************************************************************** | |
811 | * Open an instance of the tablet driver. | |
812 | */ | |
813 | static int aiptek_open(struct input_dev *inputdev) | |
814 | { | |
815 | struct aiptek *aiptek = inputdev->private; | |
816 | ||
1da177e4 | 817 | aiptek->urb->dev = aiptek->usbdev; |
65cde54b | 818 | if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) |
1da177e4 | 819 | return -EIO; |
1da177e4 LT |
820 | |
821 | return 0; | |
822 | } | |
823 | ||
824 | /*********************************************************************** | |
825 | * Close an instance of the tablet driver. | |
826 | */ | |
827 | static void aiptek_close(struct input_dev *inputdev) | |
828 | { | |
829 | struct aiptek *aiptek = inputdev->private; | |
830 | ||
65cde54b | 831 | usb_kill_urb(aiptek->urb); |
1da177e4 LT |
832 | } |
833 | ||
834 | /*********************************************************************** | |
05f091ab | 835 | * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x, |
1da177e4 LT |
836 | * where they were known as usb_set_report and usb_get_report. |
837 | */ | |
838 | static int | |
839 | aiptek_set_report(struct aiptek *aiptek, | |
840 | unsigned char report_type, | |
841 | unsigned char report_id, void *buffer, int size) | |
842 | { | |
843 | return usb_control_msg(aiptek->usbdev, | |
844 | usb_sndctrlpipe(aiptek->usbdev, 0), | |
845 | USB_REQ_SET_REPORT, | |
846 | USB_TYPE_CLASS | USB_RECIP_INTERFACE | | |
847 | USB_DIR_OUT, (report_type << 8) + report_id, | |
848 | aiptek->ifnum, buffer, size, 5000); | |
849 | } | |
850 | ||
851 | static int | |
852 | aiptek_get_report(struct aiptek *aiptek, | |
853 | unsigned char report_type, | |
854 | unsigned char report_id, void *buffer, int size) | |
855 | { | |
856 | return usb_control_msg(aiptek->usbdev, | |
857 | usb_rcvctrlpipe(aiptek->usbdev, 0), | |
858 | USB_REQ_GET_REPORT, | |
859 | USB_TYPE_CLASS | USB_RECIP_INTERFACE | | |
860 | USB_DIR_IN, (report_type << 8) + report_id, | |
861 | aiptek->ifnum, buffer, size, 5000); | |
862 | } | |
863 | ||
864 | /*********************************************************************** | |
865 | * Send a command to the tablet. | |
866 | */ | |
867 | static int | |
868 | aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) | |
869 | { | |
870 | const int sizeof_buf = 3 * sizeof(u8); | |
871 | int ret; | |
872 | u8 *buf; | |
873 | ||
874 | buf = kmalloc(sizeof_buf, GFP_KERNEL); | |
875 | if (!buf) | |
876 | return -ENOMEM; | |
877 | ||
878 | buf[0] = 2; | |
879 | buf[1] = command; | |
880 | buf[2] = data; | |
881 | ||
882 | if ((ret = | |
883 | aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { | |
884 | dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x", | |
885 | command, data); | |
886 | } | |
887 | kfree(buf); | |
888 | return ret < 0 ? ret : 0; | |
889 | } | |
890 | ||
891 | /*********************************************************************** | |
892 | * Retrieve information from the tablet. Querying info is defined as first | |
893 | * sending the {command,data} sequence as a command, followed by a wait | |
894 | * (aka, "programmaticDelay") and then a "read" request. | |
895 | */ | |
896 | static int | |
897 | aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) | |
898 | { | |
899 | const int sizeof_buf = 3 * sizeof(u8); | |
900 | int ret; | |
901 | u8 *buf; | |
902 | ||
903 | buf = kmalloc(sizeof_buf, GFP_KERNEL); | |
904 | if (!buf) | |
905 | return -ENOMEM; | |
906 | ||
907 | buf[0] = 2; | |
908 | buf[1] = command; | |
909 | buf[2] = data; | |
910 | ||
911 | if (aiptek_command(aiptek, command, data) != 0) { | |
912 | kfree(buf); | |
913 | return -EIO; | |
914 | } | |
915 | msleep(aiptek->curSetting.programmableDelay); | |
916 | ||
917 | if ((ret = | |
918 | aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { | |
919 | dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x", | |
920 | buf[0], buf[1], buf[2]); | |
921 | ret = -EIO; | |
922 | } else { | |
923 | ret = le16_to_cpu(get_unaligned((__le16 *) (buf + 1))); | |
924 | } | |
925 | kfree(buf); | |
926 | return ret; | |
927 | } | |
928 | ||
929 | /*********************************************************************** | |
930 | * Program the tablet into either absolute or relative mode. | |
931 | * We also get information about the tablet's size. | |
932 | */ | |
933 | static int aiptek_program_tablet(struct aiptek *aiptek) | |
934 | { | |
935 | int ret; | |
936 | /* Execute Resolution500LPI */ | |
937 | if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0) | |
938 | return ret; | |
939 | ||
940 | /* Query getModelCode */ | |
941 | if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0) | |
942 | return ret; | |
943 | aiptek->features.modelCode = ret & 0xff; | |
944 | ||
945 | /* Query getODMCode */ | |
946 | if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0) | |
947 | return ret; | |
948 | aiptek->features.odmCode = ret; | |
949 | ||
950 | /* Query getFirmwareCode */ | |
951 | if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0) | |
952 | return ret; | |
953 | aiptek->features.firmwareCode = ret; | |
954 | ||
955 | /* Query getXextension */ | |
956 | if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) | |
957 | return ret; | |
958 | aiptek->inputdev.absmin[ABS_X] = 0; | |
959 | aiptek->inputdev.absmax[ABS_X] = ret - 1; | |
960 | ||
961 | /* Query getYextension */ | |
962 | if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) | |
963 | return ret; | |
964 | aiptek->inputdev.absmin[ABS_Y] = 0; | |
965 | aiptek->inputdev.absmax[ABS_Y] = ret - 1; | |
966 | ||
967 | /* Query getPressureLevels */ | |
968 | if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) | |
969 | return ret; | |
970 | aiptek->inputdev.absmin[ABS_PRESSURE] = 0; | |
971 | aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1; | |
972 | ||
973 | /* Depending on whether we are in absolute or relative mode, we will | |
974 | * do a switchToTablet(absolute) or switchToMouse(relative) command. | |
975 | */ | |
976 | if (aiptek->curSetting.coordinateMode == | |
977 | AIPTEK_COORDINATE_ABSOLUTE_MODE) { | |
978 | /* Execute switchToTablet */ | |
979 | if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) { | |
980 | return ret; | |
981 | } | |
982 | } else { | |
983 | /* Execute switchToMouse */ | |
984 | if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) { | |
985 | return ret; | |
986 | } | |
987 | } | |
988 | ||
989 | /* Enable the macro keys */ | |
990 | if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0) | |
991 | return ret; | |
992 | #if 0 | |
993 | /* Execute FilterOn */ | |
994 | if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0) | |
995 | return ret; | |
996 | #endif | |
997 | ||
998 | /* Execute AutoGainOn */ | |
999 | if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0) | |
1000 | return ret; | |
1001 | ||
1002 | /* Reset the eventCount, so we track events from last (re)programming | |
1003 | */ | |
1004 | aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA; | |
1005 | aiptek->eventCount = 0; | |
1006 | ||
1007 | return 0; | |
1008 | } | |
1009 | ||
1010 | /*********************************************************************** | |
1011 | * Sysfs functions. Sysfs prefers that individually-tunable parameters | |
1012 | * exist in their separate pseudo-files. Summary data that is immutable | |
1013 | * may exist in a singular file so long as you don't define a writeable | |
1014 | * interface. | |
1015 | */ | |
1016 | ||
1017 | /*********************************************************************** | |
1018 | * support the 'size' file -- display support | |
1019 | */ | |
060b8845 | 1020 | static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1021 | { |
1022 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1023 | ||
1024 | if (aiptek == NULL) | |
1025 | return 0; | |
1026 | ||
1027 | return snprintf(buf, PAGE_SIZE, "%dx%d\n", | |
1028 | aiptek->inputdev.absmax[ABS_X] + 1, | |
1029 | aiptek->inputdev.absmax[ABS_Y] + 1); | |
1030 | } | |
1031 | ||
1032 | /* These structs define the sysfs files, param #1 is the name of the | |
1033 | * file, param 2 is the file permissions, param 3 & 4 are to the | |
1034 | * output generator and input parser routines. Absence of a routine is | |
1035 | * permitted -- it only means can't either 'cat' the file, or send data | |
1036 | * to it. | |
1037 | */ | |
1038 | static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); | |
1039 | ||
1040 | /*********************************************************************** | |
1041 | * support routines for the 'product_id' file | |
1042 | */ | |
060b8845 | 1043 | static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1044 | { |
1045 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1046 | ||
1047 | if (aiptek == NULL) | |
1048 | return 0; | |
1049 | ||
1050 | return snprintf(buf, PAGE_SIZE, "0x%04x\n", | |
1051 | aiptek->inputdev.id.product); | |
1052 | } | |
1053 | ||
1054 | static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); | |
1055 | ||
1056 | /*********************************************************************** | |
1057 | * support routines for the 'vendor_id' file | |
1058 | */ | |
060b8845 | 1059 | static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1060 | { |
1061 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1062 | ||
1063 | if (aiptek == NULL) | |
1064 | return 0; | |
1065 | ||
1066 | return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor); | |
1067 | } | |
1068 | ||
1069 | static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); | |
1070 | ||
1071 | /*********************************************************************** | |
1072 | * support routines for the 'vendor' file | |
1073 | */ | |
060b8845 | 1074 | static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1075 | { |
1076 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1077 | int retval; | |
1078 | ||
1079 | if (aiptek == NULL) | |
1080 | return 0; | |
1081 | ||
1082 | retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer); | |
1083 | return retval; | |
1084 | } | |
1085 | ||
1086 | static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL); | |
1087 | ||
1088 | /*********************************************************************** | |
1089 | * support routines for the 'product' file | |
1090 | */ | |
060b8845 | 1091 | static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1092 | { |
1093 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1094 | int retval; | |
1095 | ||
1096 | if (aiptek == NULL) | |
1097 | return 0; | |
1098 | ||
1099 | retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product); | |
1100 | return retval; | |
1101 | } | |
1102 | ||
1103 | static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL); | |
1104 | ||
1105 | /*********************************************************************** | |
1106 | * support routines for the 'pointer_mode' file. Note that this file | |
1107 | * both displays current setting and allows reprogramming. | |
1108 | */ | |
060b8845 | 1109 | static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1110 | { |
1111 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1112 | char *s; | |
1113 | ||
1114 | if (aiptek == NULL) | |
1115 | return 0; | |
1116 | ||
1117 | switch (aiptek->curSetting.pointerMode) { | |
1118 | case AIPTEK_POINTER_ONLY_STYLUS_MODE: | |
1119 | s = "stylus"; | |
1120 | break; | |
1121 | ||
1122 | case AIPTEK_POINTER_ONLY_MOUSE_MODE: | |
1123 | s = "mouse"; | |
1124 | break; | |
1125 | ||
1126 | case AIPTEK_POINTER_EITHER_MODE: | |
1127 | s = "either"; | |
1128 | break; | |
1129 | ||
1130 | default: | |
1131 | s = "unknown"; | |
1132 | break; | |
1133 | } | |
1134 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1135 | } | |
1136 | ||
1137 | static ssize_t | |
060b8845 | 1138 | store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1139 | { |
1140 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1141 | if (aiptek == NULL) | |
1142 | return 0; | |
1143 | ||
1144 | if (strcmp(buf, "stylus") == 0) { | |
1145 | aiptek->newSetting.pointerMode = | |
1146 | AIPTEK_POINTER_ONLY_STYLUS_MODE; | |
1147 | } else if (strcmp(buf, "mouse") == 0) { | |
1148 | aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE; | |
1149 | } else if (strcmp(buf, "either") == 0) { | |
1150 | aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; | |
1151 | } | |
1152 | return count; | |
1153 | } | |
1154 | ||
1155 | static DEVICE_ATTR(pointer_mode, | |
1156 | S_IRUGO | S_IWUGO, | |
1157 | show_tabletPointerMode, store_tabletPointerMode); | |
1158 | ||
1159 | /*********************************************************************** | |
1160 | * support routines for the 'coordinate_mode' file. Note that this file | |
1161 | * both displays current setting and allows reprogramming. | |
1162 | */ | |
060b8845 | 1163 | static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1164 | { |
1165 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1166 | char *s; | |
1167 | ||
1168 | if (aiptek == NULL) | |
1169 | return 0; | |
1170 | ||
1171 | switch (aiptek->curSetting.coordinateMode) { | |
1172 | case AIPTEK_COORDINATE_ABSOLUTE_MODE: | |
1173 | s = "absolute"; | |
1174 | break; | |
1175 | ||
1176 | case AIPTEK_COORDINATE_RELATIVE_MODE: | |
1177 | s = "relative"; | |
1178 | break; | |
1179 | ||
1180 | default: | |
1181 | s = "unknown"; | |
1182 | break; | |
1183 | } | |
1184 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1185 | } | |
1186 | ||
1187 | static ssize_t | |
060b8845 | 1188 | store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1189 | { |
1190 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1191 | if (aiptek == NULL) | |
1192 | return 0; | |
1193 | ||
1194 | if (strcmp(buf, "absolute") == 0) { | |
1195 | aiptek->newSetting.pointerMode = | |
1196 | AIPTEK_COORDINATE_ABSOLUTE_MODE; | |
1197 | } else if (strcmp(buf, "relative") == 0) { | |
1198 | aiptek->newSetting.pointerMode = | |
1199 | AIPTEK_COORDINATE_RELATIVE_MODE; | |
1200 | } | |
1201 | return count; | |
1202 | } | |
1203 | ||
1204 | static DEVICE_ATTR(coordinate_mode, | |
1205 | S_IRUGO | S_IWUGO, | |
1206 | show_tabletCoordinateMode, store_tabletCoordinateMode); | |
1207 | ||
1208 | /*********************************************************************** | |
1209 | * support routines for the 'tool_mode' file. Note that this file | |
1210 | * both displays current setting and allows reprogramming. | |
1211 | */ | |
060b8845 | 1212 | static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1213 | { |
1214 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1215 | char *s; | |
1216 | ||
1217 | if (aiptek == NULL) | |
1218 | return 0; | |
1219 | ||
1220 | switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) { | |
1221 | case AIPTEK_TOOL_BUTTON_MOUSE_MODE: | |
1222 | s = "mouse"; | |
1223 | break; | |
1224 | ||
1225 | case AIPTEK_TOOL_BUTTON_ERASER_MODE: | |
1226 | s = "eraser"; | |
1227 | break; | |
1228 | ||
1229 | case AIPTEK_TOOL_BUTTON_PENCIL_MODE: | |
1230 | s = "pencil"; | |
1231 | break; | |
1232 | ||
1233 | case AIPTEK_TOOL_BUTTON_PEN_MODE: | |
1234 | s = "pen"; | |
1235 | break; | |
1236 | ||
1237 | case AIPTEK_TOOL_BUTTON_BRUSH_MODE: | |
1238 | s = "brush"; | |
1239 | break; | |
1240 | ||
1241 | case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE: | |
1242 | s = "airbrush"; | |
1243 | break; | |
1244 | ||
1245 | case AIPTEK_TOOL_BUTTON_LENS_MODE: | |
1246 | s = "lens"; | |
1247 | break; | |
1248 | ||
1249 | default: | |
1250 | s = "unknown"; | |
1251 | break; | |
1252 | } | |
1253 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1254 | } | |
1255 | ||
1256 | static ssize_t | |
060b8845 | 1257 | store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1258 | { |
1259 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1260 | if (aiptek == NULL) | |
1261 | return 0; | |
1262 | ||
1263 | if (strcmp(buf, "mouse") == 0) { | |
1264 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE; | |
1265 | } else if (strcmp(buf, "eraser") == 0) { | |
1266 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE; | |
1267 | } else if (strcmp(buf, "pencil") == 0) { | |
1268 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE; | |
1269 | } else if (strcmp(buf, "pen") == 0) { | |
1270 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; | |
1271 | } else if (strcmp(buf, "brush") == 0) { | |
1272 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE; | |
1273 | } else if (strcmp(buf, "airbrush") == 0) { | |
1274 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE; | |
1275 | } else if (strcmp(buf, "lens") == 0) { | |
1276 | aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE; | |
1277 | } | |
1278 | ||
1279 | return count; | |
1280 | } | |
1281 | ||
1282 | static DEVICE_ATTR(tool_mode, | |
1283 | S_IRUGO | S_IWUGO, | |
1284 | show_tabletToolMode, store_tabletToolMode); | |
1285 | ||
1286 | /*********************************************************************** | |
1287 | * support routines for the 'xtilt' file. Note that this file | |
1288 | * both displays current setting and allows reprogramming. | |
1289 | */ | |
060b8845 | 1290 | static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1291 | { |
1292 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1293 | ||
1294 | if (aiptek == NULL) | |
1295 | return 0; | |
1296 | ||
1297 | if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { | |
1298 | return snprintf(buf, PAGE_SIZE, "disable\n"); | |
1299 | } else { | |
1300 | return snprintf(buf, PAGE_SIZE, "%d\n", | |
1301 | aiptek->curSetting.xTilt); | |
1302 | } | |
1303 | } | |
1304 | ||
1305 | static ssize_t | |
060b8845 | 1306 | store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1307 | { |
1308 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1309 | int x; | |
1310 | ||
1311 | if (aiptek == NULL) | |
1312 | return 0; | |
1313 | ||
1314 | if (strcmp(buf, "disable") == 0) { | |
1315 | aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; | |
1316 | } else { | |
1317 | x = (int)simple_strtol(buf, NULL, 10); | |
1318 | if (x >= AIPTEK_TILT_MIN && x <= AIPTEK_TILT_MAX) { | |
1319 | aiptek->newSetting.xTilt = x; | |
1320 | } | |
1321 | } | |
1322 | return count; | |
1323 | } | |
1324 | ||
1325 | static DEVICE_ATTR(xtilt, | |
1326 | S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt); | |
1327 | ||
1328 | /*********************************************************************** | |
1329 | * support routines for the 'ytilt' file. Note that this file | |
1330 | * both displays current setting and allows reprogramming. | |
1331 | */ | |
060b8845 | 1332 | static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1333 | { |
1334 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1335 | ||
1336 | if (aiptek == NULL) | |
1337 | return 0; | |
1338 | ||
1339 | if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { | |
1340 | return snprintf(buf, PAGE_SIZE, "disable\n"); | |
1341 | } else { | |
1342 | return snprintf(buf, PAGE_SIZE, "%d\n", | |
1343 | aiptek->curSetting.yTilt); | |
1344 | } | |
1345 | } | |
1346 | ||
1347 | static ssize_t | |
060b8845 | 1348 | store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1349 | { |
1350 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1351 | int y; | |
1352 | ||
1353 | if (aiptek == NULL) | |
1354 | return 0; | |
1355 | ||
1356 | if (strcmp(buf, "disable") == 0) { | |
1357 | aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; | |
1358 | } else { | |
1359 | y = (int)simple_strtol(buf, NULL, 10); | |
1360 | if (y >= AIPTEK_TILT_MIN && y <= AIPTEK_TILT_MAX) { | |
1361 | aiptek->newSetting.yTilt = y; | |
1362 | } | |
1363 | } | |
1364 | return count; | |
1365 | } | |
1366 | ||
1367 | static DEVICE_ATTR(ytilt, | |
1368 | S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt); | |
1369 | ||
1370 | /*********************************************************************** | |
1371 | * support routines for the 'jitter' file. Note that this file | |
1372 | * both displays current setting and allows reprogramming. | |
1373 | */ | |
060b8845 | 1374 | static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1375 | { |
1376 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1377 | ||
1378 | if (aiptek == NULL) | |
1379 | return 0; | |
1380 | ||
1381 | return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); | |
1382 | } | |
1383 | ||
1384 | static ssize_t | |
060b8845 | 1385 | store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1386 | { |
1387 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1388 | ||
1389 | if (aiptek == NULL) | |
1390 | return 0; | |
1391 | ||
1392 | aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10); | |
1393 | return count; | |
1394 | } | |
1395 | ||
1396 | static DEVICE_ATTR(jitter, | |
1397 | S_IRUGO | S_IWUGO, | |
1398 | show_tabletJitterDelay, store_tabletJitterDelay); | |
1399 | ||
1400 | /*********************************************************************** | |
1401 | * support routines for the 'delay' file. Note that this file | |
1402 | * both displays current setting and allows reprogramming. | |
1403 | */ | |
060b8845 | 1404 | static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1405 | { |
1406 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1407 | ||
1408 | if (aiptek == NULL) | |
1409 | return 0; | |
1410 | ||
1411 | return snprintf(buf, PAGE_SIZE, "%d\n", | |
1412 | aiptek->curSetting.programmableDelay); | |
1413 | } | |
1414 | ||
1415 | static ssize_t | |
060b8845 | 1416 | store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1417 | { |
1418 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1419 | ||
1420 | if (aiptek == NULL) | |
1421 | return 0; | |
1422 | ||
1423 | aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10); | |
1424 | return count; | |
1425 | } | |
1426 | ||
1427 | static DEVICE_ATTR(delay, | |
1428 | S_IRUGO | S_IWUGO, | |
1429 | show_tabletProgrammableDelay, store_tabletProgrammableDelay); | |
1430 | ||
1431 | /*********************************************************************** | |
1432 | * support routines for the 'input_path' file. Note that this file | |
1433 | * only displays current setting. | |
1434 | */ | |
060b8845 | 1435 | static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1436 | { |
1437 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1438 | ||
1439 | if (aiptek == NULL) | |
1440 | return 0; | |
1441 | ||
1442 | return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n", | |
1443 | aiptek->features.inputPath); | |
1444 | } | |
1445 | ||
1446 | static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL); | |
1447 | ||
1448 | /*********************************************************************** | |
1449 | * support routines for the 'event_count' file. Note that this file | |
1450 | * only displays current setting. | |
1451 | */ | |
060b8845 | 1452 | static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1453 | { |
1454 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1455 | ||
1456 | if (aiptek == NULL) | |
1457 | return 0; | |
1458 | ||
1459 | return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); | |
1460 | } | |
1461 | ||
1462 | static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL); | |
1463 | ||
1464 | /*********************************************************************** | |
1465 | * support routines for the 'diagnostic' file. Note that this file | |
1466 | * only displays current setting. | |
1467 | */ | |
060b8845 | 1468 | static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1469 | { |
1470 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1471 | char *retMsg; | |
1472 | ||
1473 | if (aiptek == NULL) | |
1474 | return 0; | |
1475 | ||
1476 | switch (aiptek->diagnostic) { | |
1477 | case AIPTEK_DIAGNOSTIC_NA: | |
1478 | retMsg = "no errors\n"; | |
1479 | break; | |
1480 | ||
1481 | case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE: | |
1482 | retMsg = "Error: receiving relative reports\n"; | |
1483 | break; | |
1484 | ||
1485 | case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE: | |
1486 | retMsg = "Error: receiving absolute reports\n"; | |
1487 | break; | |
1488 | ||
1489 | case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED: | |
1490 | if (aiptek->curSetting.pointerMode == | |
1491 | AIPTEK_POINTER_ONLY_MOUSE_MODE) { | |
1492 | retMsg = "Error: receiving stylus reports\n"; | |
1493 | } else { | |
1494 | retMsg = "Error: receiving mouse reports\n"; | |
1495 | } | |
1496 | break; | |
1497 | ||
1498 | default: | |
1499 | return 0; | |
1500 | } | |
1501 | return snprintf(buf, PAGE_SIZE, retMsg); | |
1502 | } | |
1503 | ||
1504 | static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); | |
1505 | ||
1506 | /*********************************************************************** | |
1507 | * support routines for the 'stylus_upper' file. Note that this file | |
1508 | * both displays current setting and allows for setting changing. | |
1509 | */ | |
060b8845 | 1510 | static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1511 | { |
1512 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1513 | char *s; | |
1514 | ||
1515 | if (aiptek == NULL) | |
1516 | return 0; | |
1517 | ||
1518 | switch (aiptek->curSetting.stylusButtonUpper) { | |
1519 | case AIPTEK_STYLUS_UPPER_BUTTON: | |
1520 | s = "upper"; | |
1521 | break; | |
1522 | ||
1523 | case AIPTEK_STYLUS_LOWER_BUTTON: | |
1524 | s = "lower"; | |
1525 | break; | |
1526 | ||
1527 | default: | |
1528 | s = "unknown"; | |
1529 | break; | |
1530 | } | |
1531 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1532 | } | |
1533 | ||
1534 | static ssize_t | |
060b8845 | 1535 | store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1536 | { |
1537 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1538 | ||
1539 | if (aiptek == NULL) | |
1540 | return 0; | |
1541 | ||
1542 | if (strcmp(buf, "upper") == 0) { | |
1543 | aiptek->newSetting.stylusButtonUpper = | |
1544 | AIPTEK_STYLUS_UPPER_BUTTON; | |
1545 | } else if (strcmp(buf, "lower") == 0) { | |
1546 | aiptek->newSetting.stylusButtonUpper = | |
1547 | AIPTEK_STYLUS_LOWER_BUTTON; | |
1548 | } | |
1549 | return count; | |
1550 | } | |
1551 | ||
1552 | static DEVICE_ATTR(stylus_upper, | |
1553 | S_IRUGO | S_IWUGO, | |
1554 | show_tabletStylusUpper, store_tabletStylusUpper); | |
1555 | ||
1556 | /*********************************************************************** | |
1557 | * support routines for the 'stylus_lower' file. Note that this file | |
1558 | * both displays current setting and allows for setting changing. | |
1559 | */ | |
060b8845 | 1560 | static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1561 | { |
1562 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1563 | char *s; | |
1564 | ||
1565 | if (aiptek == NULL) | |
1566 | return 0; | |
1567 | ||
1568 | switch (aiptek->curSetting.stylusButtonLower) { | |
1569 | case AIPTEK_STYLUS_UPPER_BUTTON: | |
1570 | s = "upper"; | |
1571 | break; | |
1572 | ||
1573 | case AIPTEK_STYLUS_LOWER_BUTTON: | |
1574 | s = "lower"; | |
1575 | break; | |
1576 | ||
1577 | default: | |
1578 | s = "unknown"; | |
1579 | break; | |
1580 | } | |
1581 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1582 | } | |
1583 | ||
1584 | static ssize_t | |
060b8845 | 1585 | store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1586 | { |
1587 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1588 | ||
1589 | if (aiptek == NULL) | |
1590 | return 0; | |
1591 | ||
1592 | if (strcmp(buf, "upper") == 0) { | |
1593 | aiptek->newSetting.stylusButtonLower = | |
1594 | AIPTEK_STYLUS_UPPER_BUTTON; | |
1595 | } else if (strcmp(buf, "lower") == 0) { | |
1596 | aiptek->newSetting.stylusButtonLower = | |
1597 | AIPTEK_STYLUS_LOWER_BUTTON; | |
1598 | } | |
1599 | return count; | |
1600 | } | |
1601 | ||
1602 | static DEVICE_ATTR(stylus_lower, | |
1603 | S_IRUGO | S_IWUGO, | |
1604 | show_tabletStylusLower, store_tabletStylusLower); | |
1605 | ||
1606 | /*********************************************************************** | |
1607 | * support routines for the 'mouse_left' file. Note that this file | |
1608 | * both displays current setting and allows for setting changing. | |
1609 | */ | |
060b8845 | 1610 | static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1611 | { |
1612 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1613 | char *s; | |
1614 | ||
1615 | if (aiptek == NULL) | |
1616 | return 0; | |
1617 | ||
1618 | switch (aiptek->curSetting.mouseButtonLeft) { | |
1619 | case AIPTEK_MOUSE_LEFT_BUTTON: | |
1620 | s = "left"; | |
1621 | break; | |
1622 | ||
1623 | case AIPTEK_MOUSE_MIDDLE_BUTTON: | |
1624 | s = "middle"; | |
1625 | break; | |
1626 | ||
1627 | case AIPTEK_MOUSE_RIGHT_BUTTON: | |
1628 | s = "right"; | |
1629 | break; | |
1630 | ||
1631 | default: | |
1632 | s = "unknown"; | |
1633 | break; | |
1634 | } | |
1635 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1636 | } | |
1637 | ||
1638 | static ssize_t | |
060b8845 | 1639 | store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1640 | { |
1641 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1642 | ||
1643 | if (aiptek == NULL) | |
1644 | return 0; | |
1645 | ||
1646 | if (strcmp(buf, "left") == 0) { | |
1647 | aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; | |
1648 | } else if (strcmp(buf, "middle") == 0) { | |
1649 | aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON; | |
1650 | } else if (strcmp(buf, "right") == 0) { | |
1651 | aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON; | |
1652 | } | |
1653 | return count; | |
1654 | } | |
1655 | ||
1656 | static DEVICE_ATTR(mouse_left, | |
1657 | S_IRUGO | S_IWUGO, | |
1658 | show_tabletMouseLeft, store_tabletMouseLeft); | |
1659 | ||
1660 | /*********************************************************************** | |
1661 | * support routines for the 'mouse_middle' file. Note that this file | |
1662 | * both displays current setting and allows for setting changing. | |
1663 | */ | |
060b8845 | 1664 | static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1665 | { |
1666 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1667 | char *s; | |
1668 | ||
1669 | if (aiptek == NULL) | |
1670 | return 0; | |
1671 | ||
1672 | switch (aiptek->curSetting.mouseButtonMiddle) { | |
1673 | case AIPTEK_MOUSE_LEFT_BUTTON: | |
1674 | s = "left"; | |
1675 | break; | |
1676 | ||
1677 | case AIPTEK_MOUSE_MIDDLE_BUTTON: | |
1678 | s = "middle"; | |
1679 | break; | |
1680 | ||
1681 | case AIPTEK_MOUSE_RIGHT_BUTTON: | |
1682 | s = "right"; | |
1683 | break; | |
1684 | ||
1685 | default: | |
1686 | s = "unknown"; | |
1687 | break; | |
1688 | } | |
1689 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1690 | } | |
1691 | ||
1692 | static ssize_t | |
060b8845 | 1693 | store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1694 | { |
1695 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1696 | ||
1697 | if (aiptek == NULL) | |
1698 | return 0; | |
1699 | ||
1700 | if (strcmp(buf, "left") == 0) { | |
1701 | aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON; | |
1702 | } else if (strcmp(buf, "middle") == 0) { | |
1703 | aiptek->newSetting.mouseButtonMiddle = | |
1704 | AIPTEK_MOUSE_MIDDLE_BUTTON; | |
1705 | } else if (strcmp(buf, "right") == 0) { | |
1706 | aiptek->newSetting.mouseButtonMiddle = | |
1707 | AIPTEK_MOUSE_RIGHT_BUTTON; | |
1708 | } | |
1709 | return count; | |
1710 | } | |
1711 | ||
1712 | static DEVICE_ATTR(mouse_middle, | |
1713 | S_IRUGO | S_IWUGO, | |
1714 | show_tabletMouseMiddle, store_tabletMouseMiddle); | |
1715 | ||
1716 | /*********************************************************************** | |
1717 | * support routines for the 'mouse_right' file. Note that this file | |
1718 | * both displays current setting and allows for setting changing. | |
1719 | */ | |
060b8845 | 1720 | static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1721 | { |
1722 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1723 | char *s; | |
1724 | ||
1725 | if (aiptek == NULL) | |
1726 | return 0; | |
1727 | ||
1728 | switch (aiptek->curSetting.mouseButtonRight) { | |
1729 | case AIPTEK_MOUSE_LEFT_BUTTON: | |
1730 | s = "left"; | |
1731 | break; | |
1732 | ||
1733 | case AIPTEK_MOUSE_MIDDLE_BUTTON: | |
1734 | s = "middle"; | |
1735 | break; | |
1736 | ||
1737 | case AIPTEK_MOUSE_RIGHT_BUTTON: | |
1738 | s = "right"; | |
1739 | break; | |
1740 | ||
1741 | default: | |
1742 | s = "unknown"; | |
1743 | break; | |
1744 | } | |
1745 | return snprintf(buf, PAGE_SIZE, "%s\n", s); | |
1746 | } | |
1747 | ||
1748 | static ssize_t | |
060b8845 | 1749 | store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1750 | { |
1751 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1752 | ||
1753 | if (aiptek == NULL) | |
1754 | return 0; | |
1755 | ||
1756 | if (strcmp(buf, "left") == 0) { | |
1757 | aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON; | |
1758 | } else if (strcmp(buf, "middle") == 0) { | |
1759 | aiptek->newSetting.mouseButtonRight = | |
1760 | AIPTEK_MOUSE_MIDDLE_BUTTON; | |
1761 | } else if (strcmp(buf, "right") == 0) { | |
1762 | aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; | |
1763 | } | |
1764 | return count; | |
1765 | } | |
1766 | ||
1767 | static DEVICE_ATTR(mouse_right, | |
1768 | S_IRUGO | S_IWUGO, | |
1769 | show_tabletMouseRight, store_tabletMouseRight); | |
1770 | ||
1771 | /*********************************************************************** | |
1772 | * support routines for the 'wheel' file. Note that this file | |
1773 | * both displays current setting and allows for setting changing. | |
1774 | */ | |
060b8845 | 1775 | static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1776 | { |
1777 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1778 | ||
1779 | if (aiptek == NULL) | |
1780 | return 0; | |
1781 | ||
1782 | if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { | |
1783 | return snprintf(buf, PAGE_SIZE, "disable\n"); | |
1784 | } else { | |
1785 | return snprintf(buf, PAGE_SIZE, "%d\n", | |
1786 | aiptek->curSetting.wheel); | |
1787 | } | |
1788 | } | |
1789 | ||
1790 | static ssize_t | |
060b8845 | 1791 | store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1792 | { |
1793 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1794 | ||
1795 | if (aiptek == NULL) | |
1796 | return 0; | |
1797 | ||
1798 | aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10); | |
1799 | return count; | |
1800 | } | |
1801 | ||
1802 | static DEVICE_ATTR(wheel, | |
1803 | S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel); | |
1804 | ||
1805 | /*********************************************************************** | |
1806 | * support routines for the 'execute' file. Note that this file | |
1807 | * both displays current setting and allows for setting changing. | |
1808 | */ | |
060b8845 | 1809 | static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1810 | { |
1811 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1812 | ||
1813 | if (aiptek == NULL) | |
1814 | return 0; | |
1815 | ||
1816 | /* There is nothing useful to display, so a one-line manual | |
1817 | * is in order... | |
1818 | */ | |
1819 | return snprintf(buf, PAGE_SIZE, | |
1820 | "Write anything to this file to program your tablet.\n"); | |
1821 | } | |
1822 | ||
1823 | static ssize_t | |
060b8845 | 1824 | store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
1825 | { |
1826 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1827 | ||
1828 | if (aiptek == NULL) | |
1829 | return 0; | |
1830 | ||
1831 | /* We do not care what you write to this file. Merely the action | |
1832 | * of writing to this file triggers a tablet reprogramming. | |
1833 | */ | |
1834 | memcpy(&aiptek->curSetting, &aiptek->newSetting, | |
1835 | sizeof(struct aiptek_settings)); | |
1836 | ||
1837 | if (aiptek_program_tablet(aiptek) < 0) | |
1838 | return -EIO; | |
1839 | ||
1840 | return count; | |
1841 | } | |
1842 | ||
1843 | static DEVICE_ATTR(execute, | |
1844 | S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute); | |
1845 | ||
1846 | /*********************************************************************** | |
1847 | * support routines for the 'odm_code' file. Note that this file | |
1848 | * only displays current setting. | |
1849 | */ | |
060b8845 | 1850 | static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1851 | { |
1852 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1853 | ||
1854 | if (aiptek == NULL) | |
1855 | return 0; | |
1856 | ||
1857 | return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); | |
1858 | } | |
1859 | ||
1860 | static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL); | |
1861 | ||
1862 | /*********************************************************************** | |
1863 | * support routines for the 'model_code' file. Note that this file | |
1864 | * only displays current setting. | |
1865 | */ | |
060b8845 | 1866 | static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1867 | { |
1868 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1869 | ||
1870 | if (aiptek == NULL) | |
1871 | return 0; | |
1872 | ||
1873 | return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); | |
1874 | } | |
1875 | ||
1876 | static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL); | |
1877 | ||
1878 | /*********************************************************************** | |
1879 | * support routines for the 'firmware_code' file. Note that this file | |
1880 | * only displays current setting. | |
1881 | */ | |
060b8845 | 1882 | static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
1883 | { |
1884 | struct aiptek *aiptek = dev_get_drvdata(dev); | |
1885 | ||
1886 | if (aiptek == NULL) | |
1887 | return 0; | |
1888 | ||
1889 | return snprintf(buf, PAGE_SIZE, "%04x\n", | |
1890 | aiptek->features.firmwareCode); | |
1891 | } | |
1892 | ||
1893 | static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); | |
1894 | ||
1895 | /*********************************************************************** | |
1896 | * This routine removes all existing sysfs files managed by this device | |
1897 | * driver. | |
1898 | */ | |
1899 | static void aiptek_delete_files(struct device *dev) | |
1900 | { | |
1901 | device_remove_file(dev, &dev_attr_size); | |
1902 | device_remove_file(dev, &dev_attr_product_id); | |
1903 | device_remove_file(dev, &dev_attr_vendor_id); | |
1904 | device_remove_file(dev, &dev_attr_vendor); | |
1905 | device_remove_file(dev, &dev_attr_product); | |
1906 | device_remove_file(dev, &dev_attr_pointer_mode); | |
1907 | device_remove_file(dev, &dev_attr_coordinate_mode); | |
1908 | device_remove_file(dev, &dev_attr_tool_mode); | |
1909 | device_remove_file(dev, &dev_attr_xtilt); | |
1910 | device_remove_file(dev, &dev_attr_ytilt); | |
1911 | device_remove_file(dev, &dev_attr_jitter); | |
1912 | device_remove_file(dev, &dev_attr_delay); | |
1913 | device_remove_file(dev, &dev_attr_input_path); | |
1914 | device_remove_file(dev, &dev_attr_event_count); | |
1915 | device_remove_file(dev, &dev_attr_diagnostic); | |
1916 | device_remove_file(dev, &dev_attr_odm_code); | |
1917 | device_remove_file(dev, &dev_attr_model_code); | |
1918 | device_remove_file(dev, &dev_attr_firmware_code); | |
1919 | device_remove_file(dev, &dev_attr_stylus_lower); | |
1920 | device_remove_file(dev, &dev_attr_stylus_upper); | |
1921 | device_remove_file(dev, &dev_attr_mouse_left); | |
1922 | device_remove_file(dev, &dev_attr_mouse_middle); | |
1923 | device_remove_file(dev, &dev_attr_mouse_right); | |
1924 | device_remove_file(dev, &dev_attr_wheel); | |
1925 | device_remove_file(dev, &dev_attr_execute); | |
1926 | } | |
1927 | ||
1928 | /*********************************************************************** | |
1929 | * This routine creates the sysfs files managed by this device | |
1930 | * driver. | |
1931 | */ | |
1932 | static int aiptek_add_files(struct device *dev) | |
1933 | { | |
1934 | int ret; | |
1935 | ||
1936 | if ((ret = device_create_file(dev, &dev_attr_size)) || | |
1937 | (ret = device_create_file(dev, &dev_attr_product_id)) || | |
1938 | (ret = device_create_file(dev, &dev_attr_vendor_id)) || | |
1939 | (ret = device_create_file(dev, &dev_attr_vendor)) || | |
1940 | (ret = device_create_file(dev, &dev_attr_product)) || | |
1941 | (ret = device_create_file(dev, &dev_attr_pointer_mode)) || | |
1942 | (ret = device_create_file(dev, &dev_attr_coordinate_mode)) || | |
1943 | (ret = device_create_file(dev, &dev_attr_tool_mode)) || | |
1944 | (ret = device_create_file(dev, &dev_attr_xtilt)) || | |
1945 | (ret = device_create_file(dev, &dev_attr_ytilt)) || | |
1946 | (ret = device_create_file(dev, &dev_attr_jitter)) || | |
1947 | (ret = device_create_file(dev, &dev_attr_delay)) || | |
1948 | (ret = device_create_file(dev, &dev_attr_input_path)) || | |
1949 | (ret = device_create_file(dev, &dev_attr_event_count)) || | |
1950 | (ret = device_create_file(dev, &dev_attr_diagnostic)) || | |
1951 | (ret = device_create_file(dev, &dev_attr_odm_code)) || | |
1952 | (ret = device_create_file(dev, &dev_attr_model_code)) || | |
1953 | (ret = device_create_file(dev, &dev_attr_firmware_code)) || | |
1954 | (ret = device_create_file(dev, &dev_attr_stylus_lower)) || | |
1955 | (ret = device_create_file(dev, &dev_attr_stylus_upper)) || | |
1956 | (ret = device_create_file(dev, &dev_attr_mouse_left)) || | |
1957 | (ret = device_create_file(dev, &dev_attr_mouse_middle)) || | |
1958 | (ret = device_create_file(dev, &dev_attr_mouse_right)) || | |
1959 | (ret = device_create_file(dev, &dev_attr_wheel)) || | |
1960 | (ret = device_create_file(dev, &dev_attr_execute))) { | |
1961 | err("aiptek: killing own sysfs device files\n"); | |
1962 | aiptek_delete_files(dev); | |
1963 | } | |
1964 | return ret; | |
1965 | } | |
1966 | ||
1967 | /*********************************************************************** | |
1968 | * This routine is called when a tablet has been identified. It basically | |
1969 | * sets up the tablet and the driver's internal structures. | |
1970 | */ | |
1971 | static int | |
1972 | aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) | |
1973 | { | |
1974 | struct usb_device *usbdev = interface_to_usbdev(intf); | |
1975 | struct usb_endpoint_descriptor *endpoint; | |
1976 | struct aiptek *aiptek; | |
1977 | struct input_dev *inputdev; | |
1978 | struct input_handle *inputhandle; | |
1979 | struct list_head *node, *next; | |
1980 | char path[64 + 1]; | |
1981 | int i; | |
1982 | int speeds[] = { 0, | |
1983 | AIPTEK_PROGRAMMABLE_DELAY_50, | |
1984 | AIPTEK_PROGRAMMABLE_DELAY_400, | |
1985 | AIPTEK_PROGRAMMABLE_DELAY_25, | |
1986 | AIPTEK_PROGRAMMABLE_DELAY_100, | |
1987 | AIPTEK_PROGRAMMABLE_DELAY_200, | |
1988 | AIPTEK_PROGRAMMABLE_DELAY_300 | |
1989 | }; | |
1990 | ||
1991 | /* programmableDelay is where the command-line specified | |
1992 | * delay is kept. We make it the first element of speeds[], | |
1993 | * so therefore, your override speed is tried first, then the | |
1994 | * remainder. Note that the default value of 400ms will be tried | |
1995 | * if you do not specify any command line parameter. | |
1996 | */ | |
1997 | speeds[0] = programmableDelay; | |
1998 | ||
1999 | if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL) | |
2000 | return -ENOMEM; | |
2001 | memset(aiptek, 0, sizeof(struct aiptek)); | |
2002 | ||
2003 | aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, | |
2004 | SLAB_ATOMIC, &aiptek->data_dma); | |
2005 | if (aiptek->data == NULL) { | |
2006 | kfree(aiptek); | |
2007 | return -ENOMEM; | |
2008 | } | |
2009 | ||
2010 | aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); | |
2011 | if (aiptek->urb == NULL) { | |
2012 | usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, | |
2013 | aiptek->data_dma); | |
2014 | kfree(aiptek); | |
2015 | return -ENOMEM; | |
2016 | } | |
2017 | ||
2018 | /* Set up the curSettings struct. Said struct contains the current | |
2019 | * programmable parameters. The newSetting struct contains changes | |
2020 | * the user makes to the settings via the sysfs interface. Those | |
2021 | * changes are not "committed" to curSettings until the user | |
2022 | * writes to the sysfs/.../execute file. | |
2023 | */ | |
2024 | aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; | |
2025 | aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE; | |
2026 | aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; | |
2027 | aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE; | |
2028 | aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE; | |
2029 | aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; | |
2030 | aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON; | |
2031 | aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; | |
2032 | aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON; | |
2033 | aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON; | |
2034 | aiptek->curSetting.jitterDelay = jitterDelay; | |
2035 | aiptek->curSetting.programmableDelay = programmableDelay; | |
2036 | ||
2037 | /* Both structs should have equivalent settings | |
2038 | */ | |
2039 | memcpy(&aiptek->newSetting, &aiptek->curSetting, | |
2040 | sizeof(struct aiptek_settings)); | |
2041 | ||
2042 | /* Now program the capacities of the tablet, in terms of being | |
2043 | * an input device. | |
2044 | */ | |
2045 | aiptek->inputdev.evbit[0] |= BIT(EV_KEY) | |
2046 | | BIT(EV_ABS) | |
2047 | | BIT(EV_REL) | |
2048 | | BIT(EV_MSC); | |
2049 | ||
2050 | aiptek->inputdev.absbit[0] |= | |
2051 | (BIT(ABS_X) | | |
2052 | BIT(ABS_Y) | | |
2053 | BIT(ABS_PRESSURE) | | |
2054 | BIT(ABS_TILT_X) | | |
2055 | BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC)); | |
2056 | ||
2057 | aiptek->inputdev.relbit[0] |= | |
2058 | (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); | |
2059 | ||
2060 | aiptek->inputdev.keybit[LONG(BTN_LEFT)] |= | |
2061 | (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); | |
2062 | ||
2063 | aiptek->inputdev.keybit[LONG(BTN_DIGI)] |= | |
2064 | (BIT(BTN_TOOL_PEN) | | |
2065 | BIT(BTN_TOOL_RUBBER) | | |
2066 | BIT(BTN_TOOL_PENCIL) | | |
2067 | BIT(BTN_TOOL_AIRBRUSH) | | |
2068 | BIT(BTN_TOOL_BRUSH) | | |
2069 | BIT(BTN_TOOL_MOUSE) | | |
2070 | BIT(BTN_TOOL_LENS) | | |
2071 | BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); | |
2072 | ||
2073 | aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL); | |
2074 | ||
2075 | /* Programming the tablet macro keys needs to be done with a for loop | |
2076 | * as the keycodes are discontiguous. | |
2077 | */ | |
2078 | for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) | |
2079 | set_bit(macroKeyEvents[i], aiptek->inputdev.keybit); | |
2080 | ||
2081 | /* Set up client data, pointers to open and close routines | |
2082 | * for the input device. | |
2083 | */ | |
2084 | aiptek->inputdev.private = aiptek; | |
2085 | aiptek->inputdev.open = aiptek_open; | |
2086 | aiptek->inputdev.close = aiptek_close; | |
2087 | ||
2088 | /* Determine the usb devices' physical path. | |
2089 | * Asketh not why we always pretend we're using "../input0", | |
2090 | * but I suspect this will have to be refactored one | |
2091 | * day if a single USB device can be a keyboard & a mouse | |
2092 | * & a tablet, and the inputX number actually will tell | |
2093 | * us something... | |
2094 | */ | |
2095 | if (usb_make_path(usbdev, path, 64) > 0) | |
2096 | sprintf(aiptek->features.usbPath, "%s/input0", path); | |
2097 | ||
2098 | /* Program the input device coordinate capacities. We do not yet | |
2099 | * know what maximum X, Y, and Z values are, so we're putting fake | |
2100 | * values in. Later, we'll ask the tablet to put in the correct | |
2101 | * values. | |
2102 | */ | |
2103 | aiptek->inputdev.absmin[ABS_X] = 0; | |
2104 | aiptek->inputdev.absmax[ABS_X] = 2999; | |
2105 | aiptek->inputdev.absmin[ABS_Y] = 0; | |
2106 | aiptek->inputdev.absmax[ABS_Y] = 2249; | |
2107 | aiptek->inputdev.absmin[ABS_PRESSURE] = 0; | |
2108 | aiptek->inputdev.absmax[ABS_PRESSURE] = 511; | |
2109 | aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN; | |
2110 | aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX; | |
2111 | aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN; | |
2112 | aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX; | |
2113 | aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN; | |
2114 | aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1; | |
2115 | aiptek->inputdev.absfuzz[ABS_X] = 0; | |
2116 | aiptek->inputdev.absfuzz[ABS_Y] = 0; | |
2117 | aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0; | |
2118 | aiptek->inputdev.absfuzz[ABS_TILT_X] = 0; | |
2119 | aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0; | |
2120 | aiptek->inputdev.absfuzz[ABS_WHEEL] = 0; | |
2121 | aiptek->inputdev.absflat[ABS_X] = 0; | |
2122 | aiptek->inputdev.absflat[ABS_Y] = 0; | |
2123 | aiptek->inputdev.absflat[ABS_PRESSURE] = 0; | |
2124 | aiptek->inputdev.absflat[ABS_TILT_X] = 0; | |
2125 | aiptek->inputdev.absflat[ABS_TILT_Y] = 0; | |
2126 | aiptek->inputdev.absflat[ABS_WHEEL] = 0; | |
2127 | aiptek->inputdev.name = "Aiptek"; | |
2128 | aiptek->inputdev.phys = aiptek->features.usbPath; | |
16a334c0 | 2129 | usb_to_input_id(usbdev, &aiptek->inputdev.id); |
e838a0d4 | 2130 | aiptek->inputdev.dev = &intf->dev; |
1da177e4 LT |
2131 | |
2132 | aiptek->usbdev = usbdev; | |
2133 | aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; | |
2134 | aiptek->inDelay = 0; | |
2135 | aiptek->endDelay = 0; | |
2136 | aiptek->previousJitterable = 0; | |
2137 | ||
2138 | endpoint = &intf->altsetting[0].endpoint[0].desc; | |
2139 | ||
2140 | /* Go set up our URB, which is called when the tablet receives | |
2141 | * input. | |
2142 | */ | |
2143 | usb_fill_int_urb(aiptek->urb, | |
2144 | aiptek->usbdev, | |
2145 | usb_rcvintpipe(aiptek->usbdev, | |
2146 | endpoint->bEndpointAddress), | |
2147 | aiptek->data, 8, aiptek_irq, aiptek, | |
2148 | endpoint->bInterval); | |
2149 | ||
2150 | aiptek->urb->transfer_dma = aiptek->data_dma; | |
2151 | aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
2152 | ||
2153 | /* Register the tablet as an Input Device | |
2154 | */ | |
2155 | input_register_device(&aiptek->inputdev); | |
2156 | ||
2157 | /* We now will look for the evdev device which is mapped to | |
2158 | * the tablet. The partial name is kept in the link list of | |
2159 | * input_handles associated with this input device. | |
2160 | * What identifies an evdev input_handler is that it begins | |
2161 | * with 'event', continues with a digit, and that in turn | |
2162 | * is mapped to /{devfs}/input/eventN. | |
2163 | */ | |
2164 | inputdev = &aiptek->inputdev; | |
2165 | list_for_each_safe(node, next, &inputdev->h_list) { | |
2166 | inputhandle = to_handle(node); | |
2167 | if (strncmp(inputhandle->name, "event", 5) == 0) { | |
2168 | strcpy(aiptek->features.inputPath, inputhandle->name); | |
2169 | break; | |
2170 | } | |
2171 | } | |
2172 | ||
2173 | info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath); | |
2174 | ||
2175 | /* Program the tablet. This sets the tablet up in the mode | |
2176 | * specified in newSetting, and also queries the tablet's | |
2177 | * physical capacities. | |
2178 | * | |
2179 | * Sanity check: if a tablet doesn't like the slow programmatic | |
2180 | * delay, we often get sizes of 0x0. Let's use that as an indicator | |
2181 | * to try faster delays, up to 25 ms. If that logic fails, well, you'll | |
2182 | * have to explain to us how your tablet thinks it's 0x0, and yet that's | |
2183 | * not an error :-) | |
2184 | */ | |
2185 | ||
2186 | for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { | |
2187 | aiptek->curSetting.programmableDelay = speeds[i]; | |
2188 | (void)aiptek_program_tablet(aiptek); | |
2189 | if (aiptek->inputdev.absmax[ABS_X] > 0) { | |
2190 | info("input: Aiptek using %d ms programming speed\n", | |
2191 | aiptek->curSetting.programmableDelay); | |
2192 | break; | |
2193 | } | |
2194 | } | |
2195 | ||
2196 | /* Associate this driver's struct with the usb interface. | |
2197 | */ | |
2198 | usb_set_intfdata(intf, aiptek); | |
2199 | ||
2200 | /* Set up the sysfs files | |
2201 | */ | |
2202 | aiptek_add_files(&intf->dev); | |
2203 | ||
2204 | /* Make sure the evdev module is loaded. Assuming evdev IS a module :-) | |
2205 | */ | |
2206 | if (request_module("evdev") != 0) | |
2207 | info("aiptek: error loading 'evdev' module"); | |
2208 | ||
2209 | return 0; | |
2210 | } | |
2211 | ||
2212 | /* Forward declaration */ | |
2213 | static void aiptek_disconnect(struct usb_interface *intf); | |
2214 | ||
2215 | static struct usb_driver aiptek_driver = { | |
2216 | .owner = THIS_MODULE, | |
2217 | .name = "aiptek", | |
2218 | .probe = aiptek_probe, | |
2219 | .disconnect = aiptek_disconnect, | |
2220 | .id_table = aiptek_ids, | |
2221 | }; | |
2222 | ||
2223 | /*********************************************************************** | |
2224 | * Deal with tablet disconnecting from the system. | |
2225 | */ | |
2226 | static void aiptek_disconnect(struct usb_interface *intf) | |
2227 | { | |
2228 | struct aiptek *aiptek = usb_get_intfdata(intf); | |
2229 | ||
2230 | /* Disassociate driver's struct with usb interface | |
2231 | */ | |
2232 | usb_set_intfdata(intf, NULL); | |
2233 | if (aiptek != NULL) { | |
2234 | /* Free & unhook everything from the system. | |
2235 | */ | |
2236 | usb_kill_urb(aiptek->urb); | |
2237 | input_unregister_device(&aiptek->inputdev); | |
2238 | aiptek_delete_files(&intf->dev); | |
2239 | usb_free_urb(aiptek->urb); | |
2240 | usb_buffer_free(interface_to_usbdev(intf), | |
2241 | AIPTEK_PACKET_LENGTH, | |
2242 | aiptek->data, aiptek->data_dma); | |
2243 | kfree(aiptek); | |
1da177e4 LT |
2244 | } |
2245 | } | |
2246 | ||
2247 | static int __init aiptek_init(void) | |
2248 | { | |
2249 | int result = usb_register(&aiptek_driver); | |
2250 | if (result == 0) { | |
2251 | info(DRIVER_VERSION ": " DRIVER_AUTHOR); | |
2252 | info(DRIVER_DESC); | |
2253 | } | |
2254 | return result; | |
2255 | } | |
2256 | ||
2257 | static void __exit aiptek_exit(void) | |
2258 | { | |
2259 | usb_deregister(&aiptek_driver); | |
2260 | } | |
2261 | ||
2262 | MODULE_AUTHOR(DRIVER_AUTHOR); | |
2263 | MODULE_DESCRIPTION(DRIVER_DESC); | |
2264 | MODULE_LICENSE("GPL"); | |
2265 | ||
2266 | module_param(programmableDelay, int, 0); | |
2267 | MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming"); | |
2268 | module_param(jitterDelay, int, 0); | |
2269 | MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay"); | |
2270 | ||
2271 | module_init(aiptek_init); | |
2272 | module_exit(aiptek_exit); |