[deliverable/linux.git] / drivers / usb / misc / usb3503.c

/*
 * Driver for SMSC USB3503 USB 2.0 hub controller driver
 *
 * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb3503.h>
#include <linux/regmap.h>

#define USB3503_VIDL		0x00
#define USB3503_VIDM		0x01
#define USB3503_PIDL		0x02
#define USB3503_PIDM		0x03
#define USB3503_DIDL		0x04
#define USB3503_DIDM		0x05

#define USB3503_CFG1		0x06
#define USB3503_SELF_BUS_PWR	(1 << 7)

#define USB3503_CFG2		0x07
#define USB3503_CFG3		0x08
#define USB3503_NRD		0x09

#define USB3503_PDS		0x0a

#define USB3503_SP_ILOCK	0xe7
#define USB3503_SPILOCK_CONNECT	(1 << 1)
#define USB3503_SPILOCK_CONFIG	(1 << 0)

#define USB3503_CFGP		0xee
#define USB3503_CLKSUSP		(1 << 7)

#define USB3503_RESET		0xff

struct usb3503 {
	enum usb3503_mode	mode;
	struct regmap		*regmap;
	struct device		*dev;
	struct clk		*clk;
	u8	port_off_mask;
	int	gpio_intn;
	int	gpio_reset;
	int	gpio_connect;
	bool	secondary_ref_clk;
};

static int usb3503_reset(struct usb3503 *hub, int state)
{
	if (!state && gpio_is_valid(hub->gpio_connect))
		gpio_set_value_cansleep(hub->gpio_connect, 0);

	if (gpio_is_valid(hub->gpio_reset))
		gpio_set_value_cansleep(hub->gpio_reset, state);

	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
	if (state)
		usleep_range(4000, 10000);

	return 0;
}

static int usb3503_connect(struct usb3503 *hub)
{
	struct device *dev = hub->dev;
	int err;

	usb3503_reset(hub, 1);

	if (hub->regmap) {
		/* SP_ILOCK: set connect_n, config_n for config */
		err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
			   (USB3503_SPILOCK_CONNECT
				 | USB3503_SPILOCK_CONFIG));
		if (err < 0) {
			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
			return err;
		}

		/* PDS : Disable For Self Powered Operation */
		if (hub->port_off_mask) {
			err = regmap_update_bits(hub->regmap, USB3503_PDS,
					hub->port_off_mask,
					hub->port_off_mask);
			if (err < 0) {
				dev_err(dev, "PDS failed (%d)\n", err);
				return err;
			}
		}

		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
		err = regmap_update_bits(hub->regmap, USB3503_CFG1,
					 USB3503_SELF_BUS_PWR,
					 USB3503_SELF_BUS_PWR);
		if (err < 0) {
			dev_err(dev, "CFG1 failed (%d)\n", err);
			return err;
		}

		/* SP_LOCK: clear connect_n, config_n for hub connect */
		err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
					 (USB3503_SPILOCK_CONNECT
					  | USB3503_SPILOCK_CONFIG), 0);
		if (err < 0) {
			dev_err(dev, "SP_ILOCK failed (%d)\n", err);
			return err;
		}
	}

	if (gpio_is_valid(hub->gpio_connect))
		gpio_set_value_cansleep(hub->gpio_connect, 1);

	hub->mode = USB3503_MODE_HUB;
	dev_info(dev, "switched to HUB mode\n");

	return 0;
}

static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
{
	struct device *dev = hub->dev;
	int err = 0;

	switch (mode) {
	case USB3503_MODE_HUB:
		err = usb3503_connect(hub);
		break;

	case USB3503_MODE_STANDBY:
		usb3503_reset(hub, 0);

		hub->mode = mode;
		dev_info(dev, "switched to STANDBY mode\n");
		break;

	default:
		dev_err(dev, "unknown mode is requested\n");
		err = -EINVAL;
		break;
	}

	return err;
}

static const struct regmap_config usb3503_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,

	.max_register = USB3503_RESET,
};

static int usb3503_probe(struct usb3503 *hub)
{
	struct device *dev = hub->dev;
	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
	struct device_node *np = dev->of_node;
	int err;
	u32 mode = USB3503_MODE_HUB;
	const u32 *property;
	int len;

	if (pdata) {
		hub->port_off_mask	= pdata->port_off_mask;
		hub->gpio_intn		= pdata->gpio_intn;
		hub->gpio_connect	= pdata->gpio_connect;
		hub->gpio_reset		= pdata->gpio_reset;
		hub->mode		= pdata->initial_mode;
	} else if (np) {
		struct clk *clk;
		hub->port_off_mask = 0;

		clk = devm_clk_get(dev, "refclk");
		if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
			dev_err(dev, "unable to request refclk (%ld)\n",
					PTR_ERR(clk));
			return PTR_ERR(clk);
		}

		if (!IS_ERR(clk)) {
			u32 rate = 0;
			hub->clk = clk;

			if (!of_property_read_u32(np, "refclk-frequency",
						 &rate)) {

				switch (rate) {
				case 38400000:
				case 26000000:
				case 19200000:
				case 12000000:
					hub->secondary_ref_clk = 0;
					break;
				case 24000000:
				case 27000000:
				case 25000000:
				case 50000000:
					hub->secondary_ref_clk = 1;
					break;
				default:
					dev_err(dev,
						"unsupported reference clock rate (%d)\n",
						(int) rate);
					return -EINVAL;
				}
				err = clk_set_rate(hub->clk, rate);
				if (err) {
					dev_err(dev,
						"unable to set reference clock rate to %d\n",
						(int) rate);
					return err;
				}
			}

			err = clk_prepare_enable(hub->clk);
			if (err) {
				dev_err(dev,
					"unable to enable reference clock\n");
				return err;
			}
		}

		property = of_get_property(np, "disabled-ports", &len);
		if (property && (len / sizeof(u32)) > 0) {
			int i;
			for (i = 0; i < len / sizeof(u32); i++) {
				u32 port = be32_to_cpu(property[i]);
				if ((1 <= port) && (port <= 3))
					hub->port_off_mask |= (1 << port);
			}
		}

		hub->gpio_intn	= of_get_named_gpio(np, "intn-gpios", 0);
		if (hub->gpio_intn == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0);
		if (hub->gpio_connect == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
		if (hub->gpio_reset == -EPROBE_DEFER)
			return -EPROBE_DEFER;
		of_property_read_u32(np, "initial-mode", &mode);
		hub->mode = mode;
	}

	if (hub->port_off_mask && !hub->regmap)
		dev_err(dev, "Ports disabled with no control interface\n");

	if (gpio_is_valid(hub->gpio_intn)) {
		int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW :
						   GPIOF_OUT_INIT_HIGH;
		err = devm_gpio_request_one(dev, hub->gpio_intn, val,
					    "usb3503 intn");
		if (err) {
			dev_err(dev,
				"unable to request GPIO %d as connect pin (%d)\n",
				hub->gpio_intn, err);
			return err;
		}
	}

	if (gpio_is_valid(hub->gpio_connect)) {
		err = devm_gpio_request_one(dev, hub->gpio_connect,
				GPIOF_OUT_INIT_LOW, "usb3503 connect");
		if (err) {
			dev_err(dev,
				"unable to request GPIO %d as connect pin (%d)\n",
				hub->gpio_connect, err);
			return err;
		}
	}

	if (gpio_is_valid(hub->gpio_reset)) {
		err = devm_gpio_request_one(dev, hub->gpio_reset,
				GPIOF_OUT_INIT_LOW, "usb3503 reset");
		if (err) {
			dev_err(dev,
				"unable to request GPIO %d as reset pin (%d)\n",
				hub->gpio_reset, err);
			return err;
		}
	}

	usb3503_switch_mode(hub, hub->mode);

	dev_info(dev, "%s: probed in %s mode\n", __func__,
			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");

	return 0;
}

static int usb3503_i2c_probe(struct i2c_client *i2c,
			     const struct i2c_device_id *id)
{
	struct usb3503 *hub;
	int err;

	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
	if (!hub) {
		dev_err(&i2c->dev, "private data alloc fail\n");
		return -ENOMEM;
	}

	i2c_set_clientdata(i2c, hub);
	hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
	if (IS_ERR(hub->regmap)) {
		err = PTR_ERR(hub->regmap);
		dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
		return err;
	}
	hub->dev = &i2c->dev;

	return usb3503_probe(hub);
}

static int usb3503_platform_probe(struct platform_device *pdev)
{
	struct usb3503 *hub;

	hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
	if (!hub) {
		dev_err(&pdev->dev, "private data alloc fail\n");
		return -ENOMEM;
	}
	hub->dev = &pdev->dev;

	return usb3503_probe(hub);
}

static const struct i2c_device_id usb3503_id[] = {
	{ USB3503_I2C_NAME, 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, usb3503_id);

#ifdef CONFIG_OF
static const struct of_device_id usb3503_of_match[] = {
	{ .compatible = "smsc,usb3503", },
	{ .compatible = "smsc,usb3503a", },
	{},
};
MODULE_DEVICE_TABLE(of, usb3503_of_match);
#endif

static struct i2c_driver usb3503_i2c_driver = {
	.driver = {
		.name = USB3503_I2C_NAME,
		.of_match_table = of_match_ptr(usb3503_of_match),
	},
	.probe		= usb3503_i2c_probe,
	.id_table	= usb3503_id,
};

static struct platform_driver usb3503_platform_driver = {
	.driver = {
		.name = USB3503_I2C_NAME,
		.of_match_table = of_match_ptr(usb3503_of_match),
		.owner = THIS_MODULE,
	},
	.probe		= usb3503_platform_probe,
};

static int __init usb3503_init(void)
{
	int err;

	err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
	if (err != 0)
		pr_err("usb3503: Failed to register I2C driver: %d\n", err);

	err = platform_driver_register(&usb3503_platform_driver);
	if (err != 0)
		pr_err("usb3503: Failed to register platform driver: %d\n",
		       err);

	return 0;
}
module_init(usb3503_init);

static void __exit usb3503_exit(void)
{
	platform_driver_unregister(&usb3503_platform_driver);
	i2c_del_driver(&usb3503_i2c_driver);
}
module_exit(usb3503_exit);

MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
MODULE_DESCRIPTION("USB3503 USB HUB driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
6a099c63 DK	1	/*
	2	* Driver for SMSC USB3503 USB 2.0 hub controller driver
	3	*
	4	* Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20
657d898a	21	#include <linux/clk.h>
6a099c63 DK	22	#include <linux/i2c.h>
	23	#include <linux/gpio.h>
	24	#include <linux/delay.h>
	25	#include <linux/slab.h>
	26	#include <linux/module.h>
eab8050c	27	#include <linux/of_gpio.h>
6a099c63 DK	28	#include <linux/platform_device.h>
6a099c63 DK	29	#include <linux/platform_data/usb3503.h>
68b14134	30	#include <linux/regmap.h>
6a099c63 DK	31
	32	#define USB3503_VIDL 0x00
	33	#define USB3503_VIDM 0x01
	34	#define USB3503_PIDL 0x02
	35	#define USB3503_PIDM 0x03
	36	#define USB3503_DIDL 0x04
	37	#define USB3503_DIDM 0x05
	38
	39	#define USB3503_CFG1 0x06
	40	#define USB3503_SELF_BUS_PWR (1 << 7)
	41
	42	#define USB3503_CFG2 0x07
	43	#define USB3503_CFG3 0x08
	44	#define USB3503_NRD 0x09
	45
	46	#define USB3503_PDS 0x0a
6a099c63 DK	47
	48	#define USB3503_SP_ILOCK 0xe7
	49	#define USB3503_SPILOCK_CONNECT (1 << 1)
	50	#define USB3503_SPILOCK_CONFIG (1 << 0)
	51
	52	#define USB3503_CFGP 0xee
	53	#define USB3503_CLKSUSP (1 << 7)
	54
68b14134 MB	55	#define USB3503_RESET 0xff
68b14134 MB	56
6a099c63 DK	57	struct usb3503 {
6a099c63 DK	58	enum usb3503_mode mode;
68b14134 MB	59	struct regmap *regmap;
68b14134 MB	60	struct device *dev;
657d898a	61	struct clk *clk;
e8e44a48	62	u8 port_off_mask;
6a099c63 DK	63	int gpio_intn;
	64	int gpio_reset;
	65	int gpio_connect;
657d898a	66	bool secondary_ref_clk;
6a099c63 DK	67	};
6a099c63 DK	68
8e7245b8	69	static int usb3503_reset(struct usb3503 *hub, int state)
6a099c63	70	{
8e7245b8 MB	71	if (!state && gpio_is_valid(hub->gpio_connect))
	72	gpio_set_value_cansleep(hub->gpio_connect, 0);
	73
	74	if (gpio_is_valid(hub->gpio_reset))
	75	gpio_set_value_cansleep(hub->gpio_reset, state);
6a099c63	76
06a962fa	77	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
6a099c63	78	if (state)
06a962fa	79	usleep_range(4000, 10000);
6a099c63 DK	80
	81	return 0;
	82	}
	83
3f0d1c67	84	static int usb3503_connect(struct usb3503 *hub)
6a099c63	85	{
68b14134	86	struct device *dev = hub->dev;
3f0d1c67	87	int err;
6a099c63	88
3f0d1c67	89	usb3503_reset(hub, 1);
6a099c63	90
3f0d1c67	91	if (hub->regmap) {
6a099c63	92	/* SP_ILOCK: set connect_n, config_n for config */
68b14134	93	err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
3f0d1c67	94	(USB3503_SPILOCK_CONNECT
6a099c63 DK	95	\| USB3503_SPILOCK_CONFIG));
6a099c63 DK	96	if (err < 0) {
68b14134	97	dev_err(dev, "SP_ILOCK failed (%d)\n", err);
3f0d1c67	98	return err;
6a099c63 DK	99	}
6a099c63 DK	100
e8e44a48 DK	101	/* PDS : Disable For Self Powered Operation */
e8e44a48 DK	102	if (hub->port_off_mask) {
68b14134 MB	103	err = regmap_update_bits(hub->regmap, USB3503_PDS,
68b14134 MB	104	hub->port_off_mask,
e8e44a48 DK	105	hub->port_off_mask);
e8e44a48 DK	106	if (err < 0) {
68b14134	107	dev_err(dev, "PDS failed (%d)\n", err);
3f0d1c67	108	return err;
e8e44a48	109	}
6a099c63 DK	110	}
	111
	112	/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
68b14134 MB	113	err = regmap_update_bits(hub->regmap, USB3503_CFG1,
	114	USB3503_SELF_BUS_PWR,
	115	USB3503_SELF_BUS_PWR);
6a099c63	116	if (err < 0) {
68b14134	117	dev_err(dev, "CFG1 failed (%d)\n", err);
3f0d1c67	118	return err;
6a099c63 DK	119	}
	120
	121	/* SP_LOCK: clear connect_n, config_n for hub connect */
68b14134 MB	122	err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
	123	(USB3503_SPILOCK_CONNECT
	124	\| USB3503_SPILOCK_CONFIG), 0);
6a099c63	125	if (err < 0) {
68b14134	126	dev_err(dev, "SP_ILOCK failed (%d)\n", err);
3f0d1c67	127	return err;
6a099c63	128	}
3f0d1c67	129	}
6a099c63	130
3f0d1c67 MB	131	if (gpio_is_valid(hub->gpio_connect))
3f0d1c67 MB	132	gpio_set_value_cansleep(hub->gpio_connect, 1);
8e7245b8	133
3f0d1c67 MB	134	hub->mode = USB3503_MODE_HUB;
	135	dev_info(dev, "switched to HUB mode\n");
	136
	137	return 0;
	138	}
	139
	140	static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
	141	{
	142	struct device *dev = hub->dev;
	143	int err = 0;
	144
	145	switch (mode) {
	146	case USB3503_MODE_HUB:
	147	err = usb3503_connect(hub);
6a099c63 DK	148	break;
	149
	150	case USB3503_MODE_STANDBY:
8e7245b8	151	usb3503_reset(hub, 0);
6a099c63 DK	152
6a099c63 DK	153	hub->mode = mode;
68b14134	154	dev_info(dev, "switched to STANDBY mode\n");
6a099c63 DK	155	break;
	156
	157	default:
dd8e670d	158	dev_err(dev, "unknown mode is requested\n");
6a099c63 DK	159	err = -EINVAL;
	160	break;
	161	}
	162
6a099c63 DK	163	return err;
	164	}
	165
68b14134 MB	166	static const struct regmap_config usb3503_regmap_config = {
	167	.reg_bits = 8,
	168	.val_bits = 8,
	169
	170	.max_register = USB3503_RESET,
	171	};
	172
2487e3ee	173	static int usb3503_probe(struct usb3503 *hub)
6a099c63	174	{
2487e3ee MB	175	struct device *dev = hub->dev;
	176	struct usb3503_platform_data *pdata = dev_get_platdata(dev);
	177	struct device_node *np = dev->of_node;
	178	int err;
e5a0c874	179	u32 mode = USB3503_MODE_HUB;
e8b58b49 DK	180	const u32 *property;
e8b58b49 DK	181	int len;
6a099c63	182
eab8050c	183	if (pdata) {
e8e44a48	184	hub->port_off_mask = pdata->port_off_mask;
6a099c63 DK	185	hub->gpio_intn = pdata->gpio_intn;
	186	hub->gpio_connect = pdata->gpio_connect;
	187	hub->gpio_reset = pdata->gpio_reset;
	188	hub->mode = pdata->initial_mode;
eab8050c	189	} else if (np) {
657d898a	190	struct clk *clk;
e8b58b49 DK	191	hub->port_off_mask = 0;
e8b58b49 DK	192
657d898a MS	193	clk = devm_clk_get(dev, "refclk");
657d898a MS	194	if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
ec5734c4 TB	195	dev_err(dev, "unable to request refclk (%ld)\n",
ec5734c4 TB	196	PTR_ERR(clk));
657d898a MS	197	return PTR_ERR(clk);
	198	}
	199
	200	if (!IS_ERR(clk)) {
	201	u32 rate = 0;
	202	hub->clk = clk;
	203
	204	if (!of_property_read_u32(np, "refclk-frequency",
	205	&rate)) {
	206
	207	switch (rate) {
	208	case 38400000:
	209	case 26000000:
	210	case 19200000:
	211	case 12000000:
	212	hub->secondary_ref_clk = 0;
	213	break;
	214	case 24000000:
	215	case 27000000:
	216	case 25000000:
	217	case 50000000:
	218	hub->secondary_ref_clk = 1;
	219	break;
	220	default:
	221	dev_err(dev,
	222	"unsupported reference clock rate (%d)\n",
	223	(int) rate);
	224	return -EINVAL;
	225	}
	226	err = clk_set_rate(hub->clk, rate);
	227	if (err) {
	228	dev_err(dev,
	229	"unable to set reference clock rate to %d\n",
	230	(int) rate);
	231	return err;
	232	}
	233	}
	234
	235	err = clk_prepare_enable(hub->clk);
	236	if (err) {
	237	dev_err(dev,
	238	"unable to enable reference clock\n");
	239	return err;
	240	}
	241	}
	242
e8b58b49 DK	243	property = of_get_property(np, "disabled-ports", &len);
	244	if (property && (len / sizeof(u32)) > 0) {
	245	int i;
	246	for (i = 0; i < len / sizeof(u32); i++) {
	247	u32 port = be32_to_cpu(property[i]);
	248	if ((1 <= port) && (port <= 3))
	249	hub->port_off_mask \|= (1 << port);
	250	}
	251	}
	252
42416cc8	253	hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0);
eab8050c DK	254	if (hub->gpio_intn == -EPROBE_DEFER)
eab8050c DK	255	return -EPROBE_DEFER;
42416cc8	256	hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0);
eab8050c DK	257	if (hub->gpio_connect == -EPROBE_DEFER)
eab8050c DK	258	return -EPROBE_DEFER;
ccf92c94	259	hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
eab8050c DK	260	if (hub->gpio_reset == -EPROBE_DEFER)
	261	return -EPROBE_DEFER;
	262	of_property_read_u32(np, "initial-mode", &mode);
	263	hub->mode = mode;
6a099c63 DK	264	}
6a099c63 DK	265
3f0d1c67 MB	266	if (hub->port_off_mask && !hub->regmap)
	267	dev_err(dev, "Ports disabled with no control interface\n");
	268
6a099c63	269	if (gpio_is_valid(hub->gpio_intn)) {
657d898a MS	270	int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW :
	271	GPIOF_OUT_INIT_HIGH;
	272	err = devm_gpio_request_one(dev, hub->gpio_intn, val,
	273	"usb3503 intn");
6a099c63	274	if (err) {
2487e3ee MB	275	dev_err(dev,
	276	"unable to request GPIO %d as connect pin (%d)\n",
	277	hub->gpio_intn, err);
cffedd67	278	return err;
6a099c63 DK	279	}
	280	}
	281
	282	if (gpio_is_valid(hub->gpio_connect)) {
2487e3ee	283	err = devm_gpio_request_one(dev, hub->gpio_connect,
8e7245b8	284	GPIOF_OUT_INIT_LOW, "usb3503 connect");
6a099c63	285	if (err) {
2487e3ee MB	286	dev_err(dev,
	287	"unable to request GPIO %d as connect pin (%d)\n",
	288	hub->gpio_connect, err);
cffedd67	289	return err;
6a099c63 DK	290	}
	291	}
	292
	293	if (gpio_is_valid(hub->gpio_reset)) {
2487e3ee	294	err = devm_gpio_request_one(dev, hub->gpio_reset,
6a099c63 DK	295	GPIOF_OUT_INIT_LOW, "usb3503 reset");
6a099c63 DK	296	if (err) {
2487e3ee MB	297	dev_err(dev,
	298	"unable to request GPIO %d as reset pin (%d)\n",
	299	hub->gpio_reset, err);
cffedd67	300	return err;
6a099c63 DK	301	}
	302	}
	303
eab8050c	304	usb3503_switch_mode(hub, hub->mode);
6a099c63	305
dd8e670d	306	dev_info(dev, "%s: probed in %s mode\n", __func__,
6a099c63 DK	307	(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
	308
	309	return 0;
6a099c63 DK	310	}
6a099c63 DK	311
2487e3ee MB	312	static int usb3503_i2c_probe(struct i2c_client *i2c,
	313	const struct i2c_device_id *id)
	314	{
	315	struct usb3503 *hub;
	316	int err;
	317
	318	hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
	319	if (!hub) {
	320	dev_err(&i2c->dev, "private data alloc fail\n");
	321	return -ENOMEM;
	322	}
	323
	324	i2c_set_clientdata(i2c, hub);
	325	hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
	326	if (IS_ERR(hub->regmap)) {
	327	err = PTR_ERR(hub->regmap);
	328	dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
	329	return err;
	330	}
	331	hub->dev = &i2c->dev;
	332
	333	return usb3503_probe(hub);
	334	}
	335
3f0d1c67 MB	336	static int usb3503_platform_probe(struct platform_device *pdev)
	337	{
	338	struct usb3503 *hub;
	339
	340	hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
	341	if (!hub) {
	342	dev_err(&pdev->dev, "private data alloc fail\n");
	343	return -ENOMEM;
	344	}
	345	hub->dev = &pdev->dev;
	346
	347	return usb3503_probe(hub);
	348	}
	349
6a099c63 DK	350	static const struct i2c_device_id usb3503_id[] = {
	351	{ USB3503_I2C_NAME, 0 },
	352	{ }
	353	};
	354	MODULE_DEVICE_TABLE(i2c, usb3503_id);
	355
eab8050c DK	356	#ifdef CONFIG_OF
	357	static const struct of_device_id usb3503_of_match[] = {
	358	{ .compatible = "smsc,usb3503", },
5bdd1f4a	359	{ .compatible = "smsc,usb3503a", },
eab8050c DK	360	{},
	361	};
	362	MODULE_DEVICE_TABLE(of, usb3503_of_match);
	363	#endif
	364
3f0d1c67	365	static struct i2c_driver usb3503_i2c_driver = {
6a099c63 DK	366	.driver = {
6a099c63 DK	367	.name = USB3503_I2C_NAME,
eab8050c	368	.of_match_table = of_match_ptr(usb3503_of_match),
6a099c63	369	},
2487e3ee	370	.probe = usb3503_i2c_probe,
6a099c63 DK	371	.id_table = usb3503_id,
	372	};
	373
3f0d1c67 MB	374	static struct platform_driver usb3503_platform_driver = {
	375	.driver = {
	376	.name = USB3503_I2C_NAME,
	377	.of_match_table = of_match_ptr(usb3503_of_match),
	378	.owner = THIS_MODULE,
	379	},
	380	.probe = usb3503_platform_probe,
	381	};
	382
	383	static int __init usb3503_init(void)
	384	{
	385	int err;
	386
	387	err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
	388	if (err != 0)
	389	pr_err("usb3503: Failed to register I2C driver: %d\n", err);
	390
	391	err = platform_driver_register(&usb3503_platform_driver);
	392	if (err != 0)
	393	pr_err("usb3503: Failed to register platform driver: %d\n",
	394	err);
	395
	396	return 0;
	397	}
	398	module_init(usb3503_init);
	399
	400	static void __exit usb3503_exit(void)
	401	{
	402	platform_driver_unregister(&usb3503_platform_driver);
	403	i2c_del_driver(&usb3503_i2c_driver);
	404	}
	405	module_exit(usb3503_exit);
6a099c63 DK	406
	407	MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
	408	MODULE_DESCRIPTION("USB3503 USB HUB driver");
	409	MODULE_LICENSE("GPL");