[deliverable/linux.git] / drivers / usb / musb / Makefile

#
# for USB OTG silicon based on Mentor Graphics INVENTRA designs
#

musb_hdrc-objs := musb_core.o

obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o

ifeq ($(CONFIG_ARCH_DAVINCI),y)
	musb_hdrc-objs	+= davinci.o
endif

ifeq ($(CONFIG_USB_TUSB6010),y)
	musb_hdrc-objs	+= tusb6010.o
endif

ifeq ($(CONFIG_ARCH_OMAP2430),y)
	musb_hdrc-objs	+= omap2430.o
endif

ifeq ($(CONFIG_ARCH_OMAP3430),y)
	musb_hdrc-objs	+= omap2430.o
endif

ifeq ($(CONFIG_BF54x),y)
	musb_hdrc-objs	+= blackfin.o
endif

ifeq ($(CONFIG_BF52x),y)
	musb_hdrc-objs	+= blackfin.o
endif

ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
endif

ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
	musb_hdrc-objs		+= musb_virthub.o musb_host.o
endif

# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
# PIO only, or DMA (several potential schemes).
# though PIO is always there to back up DMA, and for ep0

ifneq ($(CONFIG_MUSB_PIO_ONLY),y)

  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
    musb_hdrc-objs		+= musbhsdma.o

  else
    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
      musb_hdrc-objs		+= cppi_dma.o

    else
      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
        musb_hdrc-objs		+= tusb6010_omap.o

      endif
    endif
  endif
endif


################################################################################

# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*

ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
	EXTRA_CFLAGS += -DMUSB_AHB_ID
endif

# Debugging

ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
	EXTRA_CFLAGS += -DDEBUG
endif
Commit	Line	Data
550a7375 FB	1	#
	2	# for USB OTG silicon based on Mentor Graphics INVENTRA designs
	3	#
	4
	5	musb_hdrc-objs := musb_core.o
	6
	7	obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
	8
	9	ifeq ($(CONFIG_ARCH_DAVINCI),y)
	10	musb_hdrc-objs += davinci.o
	11	endif
	12
	13	ifeq ($(CONFIG_USB_TUSB6010),y)
	14	musb_hdrc-objs += tusb6010.o
	15	endif
	16
	17	ifeq ($(CONFIG_ARCH_OMAP2430),y)
	18	musb_hdrc-objs += omap2430.o
	19	endif
	20
	21	ifeq ($(CONFIG_ARCH_OMAP3430),y)
	22	musb_hdrc-objs += omap2430.o
	23	endif
	24
085ad406 BW	25	ifeq ($(CONFIG_BF54x),y)
	26	musb_hdrc-objs += blackfin.o
	27	endif
	28
	29	ifeq ($(CONFIG_BF52x),y)
	30	musb_hdrc-objs += blackfin.o
	31	endif
	32
550a7375 FB	33	ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
	34	musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
	35	endif
	36
	37	ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
	38	musb_hdrc-objs += musb_virthub.o musb_host.o
	39	endif
	40
	41	# the kconfig must guarantee that only one of the
	42	# possible I/O schemes will be enabled at a time ...
	43	# PIO only, or DMA (several potential schemes).
	44	# though PIO is always there to back up DMA, and for ep0
	45
	46	ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
	47
	48	ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
	49	musb_hdrc-objs += musbhsdma.o
	50
	51	else
	52	ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
	53	musb_hdrc-objs += cppi_dma.o
	54
	55	else
	56	ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
	57	musb_hdrc-objs += tusb6010_omap.o
	58
	59	endif
	60	endif
	61	endif
	62	endif
	63
	64
	65	################################################################################
	66
	67	# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
	68
	69	ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
	70	EXTRA_CFLAGS += -DMUSB_AHB_ID
	71	endif
	72
	73	# Debugging
	74
e8164f64 FB	75	ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
e8164f64 FB	76	EXTRA_CFLAGS += -DDEBUG
550a7375	77	endif