[deliverable/linux.git] / drivers / usb / serial / belkin_sa.c

/*
 * Belkin USB Serial Adapter Driver
 *
 *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
 *  Copyright (C) 2000-2001 	Greg Kroah-Hartman (greg@kroah.com)
 *
 *  This program is largely derived from work by the linux-usb group
 *  and associated source files.  Please see the usb/serial files for
 *  individual credits and copyrights.
 *
 * 	This program is free software; you can redistribute it and/or modify
 * 	it under the terms of the GNU General Public License as published by
 * 	the Free Software Foundation; either version 2 of the License, or
 * 	(at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this
 * driver
 *
 * TODO:
 * -- Add true modem contol line query capability.  Currently we track the
 *    states reported by the interrupt and the states we request.
 * -- Add error reporting back to application for UART error conditions.
 *    Just point me at how to implement this and I'll do it. I've put the
 *    framework in, but haven't analyzed the "tty_flip" interface yet.
 * -- Add support for flush commands
 * -- Add everything that is missing :)
 *
 * 27-Nov-2001 gkh
 * 	compressed all the differnent device entries into 1.
 *
 * 30-May-2001 gkh
 *	switched from using spinlock to a semaphore, which fixes lots of
 *	problems.
 *
 * 08-Apr-2001 gb
 *	- Identify version on module load.
 *
 * 12-Mar-2001 gkh
 *	- Added support for the GoHubs GO-COM232 device which is the same as the
 *	  Peracom device.
 *
 * 06-Nov-2000 gkh
 *	- Added support for the old Belkin and Peracom devices.
 *	- Made the port able to be opened multiple times.
 *	- Added some defaults incase the line settings are things these devices
 *	  can't support.
 *
 * 18-Oct-2000 William Greathouse
 *    Released into the wild (linux-usb-devel)
 *
 * 17-Oct-2000 William Greathouse
 *    Add code to recognize firmware version and set hardware flow control
 *    appropriately.  Belkin states that firmware prior to 3.05 does not
 *    operate correctly in hardware handshake mode.  I have verified this
 *    on firmware 2.05 -- for both RTS and DTR input flow control, the control
 *    line is not reset.  The test performed by the Belkin Win* driver is
 *    to enable hardware flow control for firmware 2.06 or greater and
 *    for 1.00 or prior.  I am only enabling for 2.06 or greater.
 *
 * 12-Oct-2000 William Greathouse
 *    First cut at supporting Belkin USB Serial Adapter F5U103
 *    I did not have a copy of the original work to support this
 *    adapter, so pardon any stupid mistakes.  All of the information
 *    I am using to write this driver was acquired by using a modified
 *    UsbSnoop on Windows2000 and from examining the other USB drivers.
 */

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "belkin_sa.h"

static int debug;

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.2"
#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
#define DRIVER_DESC "USB Belkin Serial converter driver"

/* function prototypes for a Belkin USB Serial Adapter F5U103 */
static int  belkin_sa_startup(struct usb_serial *serial);
static void belkin_sa_release(struct usb_serial *serial);
static int  belkin_sa_open(struct tty_struct *tty,
			struct usb_serial_port *port);
static void belkin_sa_close(struct usb_serial_port *port);
static void belkin_sa_read_int_callback(struct urb *urb);
static void belkin_sa_set_termios(struct tty_struct *tty,
			struct usb_serial_port *port, struct ktermios * old);
static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
static int  belkin_sa_tiocmget(struct tty_struct *tty, struct file *file);
static int  belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
					unsigned int set, unsigned int clear);


static const struct usb_device_id id_table_combined[] = {
	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
	{ USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
	{ }	/* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, id_table_combined);

static struct usb_driver belkin_driver = {
	.name =		"belkin",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table_combined,
	.no_dynamic_id = 	1,
};

/* All of the device info needed for the serial converters */
static struct usb_serial_driver belkin_device = {
	.driver = {
		.owner =	THIS_MODULE,
		.name =		"belkin",
	},
	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
	.usb_driver =		&belkin_driver,
	.id_table =		id_table_combined,
	.num_ports =		1,
	.open =			belkin_sa_open,
	.close =		belkin_sa_close,
	.read_int_callback =	belkin_sa_read_int_callback,
					/* How we get the status info */
	.set_termios =		belkin_sa_set_termios,
	.break_ctl =		belkin_sa_break_ctl,
	.tiocmget =		belkin_sa_tiocmget,
	.tiocmset =		belkin_sa_tiocmset,
	.attach =		belkin_sa_startup,
	.release =		belkin_sa_release,
};


struct belkin_sa_private {
	spinlock_t		lock;
	unsigned long		control_state;
	unsigned char		last_lsr;
	unsigned char		last_msr;
	int			bad_flow_control;
};


/*
 * ***************************************************************************
 * Belkin USB Serial Adapter F5U103 specific driver functions
 * ***************************************************************************
 */

#define WDR_TIMEOUT 5000 /* default urb timeout */

/* assumes that struct usb_serial *serial is available */
#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
					    (v), 0, NULL, 0, WDR_TIMEOUT)

/* do some startup allocations not currently performed by usb_serial_probe() */
static int belkin_sa_startup(struct usb_serial *serial)
{
	struct usb_device *dev = serial->dev;
	struct belkin_sa_private *priv;

	/* allocate the private data structure */
	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
	if (!priv)
		return -1; /* error */
	/* set initial values for control structures */
	spin_lock_init(&priv->lock);
	priv->control_state = 0;
	priv->last_lsr = 0;
	priv->last_msr = 0;
	/* see comments at top of file */
	priv->bad_flow_control =
		(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
	dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
					le16_to_cpu(dev->descriptor.bcdDevice),
					priv->bad_flow_control);

	init_waitqueue_head(&serial->port[0]->write_wait);
	usb_set_serial_port_data(serial->port[0], priv);

	return 0;
}


static void belkin_sa_release(struct usb_serial *serial)
{
	struct belkin_sa_private *priv;
	int i;

	dbg("%s", __func__);

	for (i = 0; i < serial->num_ports; ++i) {
		/* My special items, the standard routines free my urbs */
		priv = usb_get_serial_port_data(serial->port[i]);
		kfree(priv);
	}
}


static int  belkin_sa_open(struct tty_struct *tty,
					struct usb_serial_port *port)
{
	int retval = 0;

	dbg("%s port %d", __func__, port->number);

	/*Start reading from the device*/
	/* TODO: Look at possibility of submitting multiple URBs to device to
	 *       enhance buffering.  Win trace shows 16 initial read URBs.
	 */
	port->read_urb->dev = port->serial->dev;
	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
	if (retval) {
		dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
		goto exit;
	}

	port->interrupt_in_urb->dev = port->serial->dev;
	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
	if (retval) {
		usb_kill_urb(port->read_urb);
		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
	}

exit:
	return retval;
} /* belkin_sa_open */


static void belkin_sa_close(struct usb_serial_port *port)
{
	dbg("%s port %d", __func__, port->number);

	usb_serial_generic_close(port);
	usb_kill_urb(port->interrupt_in_urb);
} /* belkin_sa_close */


static void belkin_sa_read_int_callback(struct urb *urb)
{
	struct usb_serial_port *port = urb->context;
	struct belkin_sa_private *priv;
	unsigned char *data = urb->transfer_buffer;
	int retval;
	int status = urb->status;
	unsigned long flags;

	switch (status) {
	case 0:
		/* success */
		break;
	case -ECONNRESET:
	case -ENOENT:
	case -ESHUTDOWN:
		/* this urb is terminated, clean up */
		dbg("%s - urb shutting down with status: %d",
		    __func__, status);
		return;
	default:
		dbg("%s - nonzero urb status received: %d",
		    __func__, status);
		goto exit;
	}

	usb_serial_debug_data(debug, &port->dev, __func__,
					urb->actual_length, data);

	/* Handle known interrupt data */
	/* ignore data[0] and data[1] */

	priv = usb_get_serial_port_data(port);
	spin_lock_irqsave(&priv->lock, flags);
	priv->last_msr = data[BELKIN_SA_MSR_INDEX];

	/* Record Control Line states */
	if (priv->last_msr & BELKIN_SA_MSR_DSR)
		priv->control_state |= TIOCM_DSR;
	else
		priv->control_state &= ~TIOCM_DSR;

	if (priv->last_msr & BELKIN_SA_MSR_CTS)
		priv->control_state |= TIOCM_CTS;
	else
		priv->control_state &= ~TIOCM_CTS;

	if (priv->last_msr & BELKIN_SA_MSR_RI)
		priv->control_state |= TIOCM_RI;
	else
		priv->control_state &= ~TIOCM_RI;

	if (priv->last_msr & BELKIN_SA_MSR_CD)
		priv->control_state |= TIOCM_CD;
	else
		priv->control_state &= ~TIOCM_CD;

	/* Now to report any errors */
	priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
#if 0
	/*
	 * fill in the flip buffer here, but I do not know the relation
	 * to the current/next receive buffer or characters.  I need
	 * to look in to this before committing any code.
	 */
	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
		tty = tty_port_tty_get(&port->port);
		/* Overrun Error */
		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
		}
		/* Parity Error */
		if (priv->last_lsr & BELKIN_SA_LSR_PE) {
		}
		/* Framing Error */
		if (priv->last_lsr & BELKIN_SA_LSR_FE) {
		}
		/* Break Indicator */
		if (priv->last_lsr & BELKIN_SA_LSR_BI) {
		}
		tty_kref_put(tty);
	}
#endif
	spin_unlock_irqrestore(&priv->lock, flags);
exit:
	retval = usb_submit_urb(urb, GFP_ATOMIC);
	if (retval)
		dev_err(&port->dev, "%s - usb_submit_urb failed with "
			"result %d\n", __func__, retval);
}

static void belkin_sa_set_termios(struct tty_struct *tty,
		struct usb_serial_port *port, struct ktermios *old_termios)
{
	struct usb_serial *serial = port->serial;
	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	unsigned int iflag;
	unsigned int cflag;
	unsigned int old_iflag = 0;
	unsigned int old_cflag = 0;
	__u16 urb_value = 0; /* Will hold the new flags */
	unsigned long flags;
	unsigned long control_state;
	int bad_flow_control;
	speed_t baud;
	struct ktermios *termios = tty->termios;

	iflag = termios->c_iflag;
	cflag = termios->c_cflag;

	termios->c_cflag &= ~CMSPAR;

	/* get a local copy of the current port settings */
	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;
	bad_flow_control = priv->bad_flow_control;
	spin_unlock_irqrestore(&priv->lock, flags);

	old_iflag = old_termios->c_iflag;
	old_cflag = old_termios->c_cflag;

	/* Set the baud rate */
	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
		/* reassert DTR and (maybe) RTS on transition from B0 */
		if ((old_cflag & CBAUD) == B0) {
			control_state |= (TIOCM_DTR|TIOCM_RTS);
			if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
				dev_err(&port->dev, "Set DTR error\n");
			/* don't set RTS if using hardware flow control */
			if (!(old_cflag & CRTSCTS))
				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
								, 1) < 0)
					dev_err(&port->dev, "Set RTS error\n");
		}
	}

	baud = tty_get_baud_rate(tty);
	if (baud) {
		urb_value = BELKIN_SA_BAUD(baud);
		/* Clip to maximum speed */
		if (urb_value == 0)
			urb_value = 1;
		/* Turn it back into a resulting real baud rate */
		baud = BELKIN_SA_BAUD(urb_value);

		/* Report the actual baud rate back to the caller */
		tty_encode_baud_rate(tty, baud, baud);
		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
			dev_err(&port->dev, "Set baudrate error\n");
	} else {
		/* Disable flow control */
		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
						BELKIN_SA_FLOW_NONE) < 0)
			dev_err(&port->dev, "Disable flowcontrol error\n");
		/* Drop RTS and DTR */
		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
		if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
			dev_err(&port->dev, "DTR LOW error\n");
		if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
			dev_err(&port->dev, "RTS LOW error\n");
	}

	/* set the parity */
	if ((cflag ^ old_cflag) & (PARENB | PARODD)) {
		if (cflag & PARENB)
			urb_value = (cflag & PARODD) ?  BELKIN_SA_PARITY_ODD
						: BELKIN_SA_PARITY_EVEN;
		else
			urb_value = BELKIN_SA_PARITY_NONE;
		if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
			dev_err(&port->dev, "Set parity error\n");
	}

	/* set the number of data bits */
	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
		switch (cflag & CSIZE) {
		case CS5:
			urb_value = BELKIN_SA_DATA_BITS(5);
			break;
		case CS6:
			urb_value = BELKIN_SA_DATA_BITS(6);
			break;
		case CS7:
			urb_value = BELKIN_SA_DATA_BITS(7);
			break;
		case CS8:
			urb_value = BELKIN_SA_DATA_BITS(8);
			break;
		default: dbg("CSIZE was not CS5-CS8, using default of 8");
			urb_value = BELKIN_SA_DATA_BITS(8);
			break;
		}
		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
			dev_err(&port->dev, "Set data bits error\n");
	}

	/* set the number of stop bits */
	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
		urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
						: BELKIN_SA_STOP_BITS(1);
		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
							urb_value) < 0)
			dev_err(&port->dev, "Set stop bits error\n");
	}

	/* Set flow control */
	if (((iflag ^ old_iflag) & (IXOFF | IXON)) ||
		((cflag ^ old_cflag) & CRTSCTS)) {
		urb_value = 0;
		if ((iflag & IXOFF) || (iflag & IXON))
			urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
		else
			urb_value &= ~(BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);

		if (cflag & CRTSCTS)
			urb_value |=  (BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
		else
			urb_value &= ~(BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);

		if (bad_flow_control)
			urb_value &= ~(BELKIN_SA_FLOW_IRTS);

		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
			dev_err(&port->dev, "Set flow control error\n");
	}

	/* save off the modified port settings */
	spin_lock_irqsave(&priv->lock, flags);
	priv->control_state = control_state;
	spin_unlock_irqrestore(&priv->lock, flags);
} /* belkin_sa_set_termios */


static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
{
	struct usb_serial_port *port = tty->driver_data;
	struct usb_serial *serial = port->serial;

	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}


static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
{
	struct usb_serial_port *port = tty->driver_data;
	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	unsigned long control_state;
	unsigned long flags;

	dbg("%s", __func__);

	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;
	spin_unlock_irqrestore(&priv->lock, flags);

	return control_state;
}


static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
			       unsigned int set, unsigned int clear)
{
	struct usb_serial_port *port = tty->driver_data;
	struct usb_serial *serial = port->serial;
	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	unsigned long control_state;
	unsigned long flags;
	int retval;
	int rts = 0;
	int dtr = 0;

	dbg("%s", __func__);

	spin_lock_irqsave(&priv->lock, flags);
	control_state = priv->control_state;

	if (set & TIOCM_RTS) {
		control_state |= TIOCM_RTS;
		rts = 1;
	}
	if (set & TIOCM_DTR) {
		control_state |= TIOCM_DTR;
		dtr = 1;
	}
	if (clear & TIOCM_RTS) {
		control_state &= ~TIOCM_RTS;
		rts = 0;
	}
	if (clear & TIOCM_DTR) {
		control_state &= ~TIOCM_DTR;
		dtr = 0;
	}

	priv->control_state = control_state;
	spin_unlock_irqrestore(&priv->lock, flags);

	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
	if (retval < 0) {
		dev_err(&port->dev, "Set RTS error %d\n", retval);
		goto exit;
	}

	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
	if (retval < 0) {
		dev_err(&port->dev, "Set DTR error %d\n", retval);
		goto exit;
	}
exit:
	return retval;
}


static int __init belkin_sa_init(void)
{
	int retval;
	retval = usb_serial_register(&belkin_device);
	if (retval)
		goto failed_usb_serial_register;
	retval = usb_register(&belkin_driver);
	if (retval)
		goto failed_usb_register;
	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
	       DRIVER_DESC "\n");
	return 0;
failed_usb_register:
	usb_serial_deregister(&belkin_device);
failed_usb_serial_register:
	return retval;
}


static void __exit belkin_sa_exit (void)
{
	usb_deregister(&belkin_driver);
	usb_serial_deregister(&belkin_device);
}


module_init(belkin_sa_init);
module_exit(belkin_sa_exit);

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
Commit	Line	Data
1da177e4 LT	1	/*
	2	* Belkin USB Serial Adapter Driver
	3	*
	4	* Copyright (C) 2000 William Greathouse (wgreathouse@smva.com)
	5	* Copyright (C) 2000-2001 Greg Kroah-Hartman (greg@kroah.com)
	6	*
	7	* This program is largely derived from work by the linux-usb group
	8	* and associated source files. Please see the usb/serial files for
	9	* individual credits and copyrights.
b69c1499	10	*
1da177e4 LT	11	* This program is free software; you can redistribute it and/or modify
	12	* it under the terms of the GNU General Public License as published by
	13	* the Free Software Foundation; either version 2 of the License, or
	14	* (at your option) any later version.
	15	*
b69c1499 AC	16	* See Documentation/usb/usb-serial.txt for more information on using this
b69c1499 AC	17	* driver
1da177e4 LT	18	*
	19	* TODO:
	20	* -- Add true modem contol line query capability. Currently we track the
	21	* states reported by the interrupt and the states we request.
	22	* -- Add error reporting back to application for UART error conditions.
	23	* Just point me at how to implement this and I'll do it. I've put the
	24	* framework in, but haven't analyzed the "tty_flip" interface yet.
	25	* -- Add support for flush commands
	26	* -- Add everything that is missing :)
	27	*
	28	* 27-Nov-2001 gkh
	29	* compressed all the differnent device entries into 1.
	30	*
	31	* 30-May-2001 gkh
b69c1499 AC	32	* switched from using spinlock to a semaphore, which fixes lots of
b69c1499 AC	33	* problems.
1da177e4 LT	34	*
	35	* 08-Apr-2001 gb
	36	* - Identify version on module load.
	37	*
	38	* 12-Mar-2001 gkh
	39	* - Added support for the GoHubs GO-COM232 device which is the same as the
	40	* Peracom device.
	41	*
	42	* 06-Nov-2000 gkh
	43	* - Added support for the old Belkin and Peracom devices.
	44	* - Made the port able to be opened multiple times.
	45	* - Added some defaults incase the line settings are things these devices
b69c1499	46	* can't support.
1da177e4 LT	47	*
	48	* 18-Oct-2000 William Greathouse
	49	* Released into the wild (linux-usb-devel)
	50	*
	51	* 17-Oct-2000 William Greathouse
	52	* Add code to recognize firmware version and set hardware flow control
	53	* appropriately. Belkin states that firmware prior to 3.05 does not
	54	* operate correctly in hardware handshake mode. I have verified this
	55	* on firmware 2.05 -- for both RTS and DTR input flow control, the control
	56	* line is not reset. The test performed by the Belkin Win* driver is
	57	* to enable hardware flow control for firmware 2.06 or greater and
	58	* for 1.00 or prior. I am only enabling for 2.06 or greater.
	59	*
	60	* 12-Oct-2000 William Greathouse
	61	* First cut at supporting Belkin USB Serial Adapter F5U103
	62	* I did not have a copy of the original work to support this
	63	* adapter, so pardon any stupid mistakes. All of the information
	64	* I am using to write this driver was acquired by using a modified
	65	* UsbSnoop on Windows2000 and from examining the other USB drivers.
	66	*/
	67
1da177e4 LT	68	#include <linux/kernel.h>
	69	#include <linux/errno.h>
	70	#include <linux/init.h>
	71	#include <linux/slab.h>
	72	#include <linux/tty.h>
	73	#include <linux/tty_driver.h>
	74	#include <linux/tty_flip.h>
	75	#include <linux/module.h>
	76	#include <linux/spinlock.h>
b69c1499	77	#include <linux/uaccess.h>
1da177e4	78	#include <linux/usb.h>
a969888c	79	#include <linux/usb/serial.h>
1da177e4 LT	80	#include "belkin_sa.h"
	81
	82	static int debug;
	83
	84	/*
	85	* Version Information
	86	*/
	87	#define DRIVER_VERSION "v1.2"
	88	#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
	89	#define DRIVER_DESC "USB Belkin Serial converter driver"
	90
	91	/* function prototypes for a Belkin USB Serial Adapter F5U103 */
b69c1499	92	static int belkin_sa_startup(struct usb_serial *serial);
f9c99bb8	93	static void belkin_sa_release(struct usb_serial *serial);
b69c1499	94	static int belkin_sa_open(struct tty_struct *tty,
a509a7e4	95	struct usb_serial_port *port);
335f8514	96	static void belkin_sa_close(struct usb_serial_port *port);
b69c1499 AC	97	static void belkin_sa_read_int_callback(struct urb *urb);
	98	static void belkin_sa_set_termios(struct tty_struct *tty,
	99	struct usb_serial_port port, struct ktermios old);
	100	static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
	101	static int belkin_sa_tiocmget(struct tty_struct tty, struct file file);
	102	static int belkin_sa_tiocmset(struct tty_struct tty, struct file file,
	103	unsigned int set, unsigned int clear);
1da177e4 LT	104
1da177e4 LT	105
7d40d7e8	106	static const struct usb_device_id id_table_combined[] = {
1da177e4 LT	107	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
	108	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
	109	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
	110	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
	111	{ USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
	112	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
b69c1499	113	{ } /* Terminating entry */
1da177e4 LT	114	};
1da177e4 LT	115
b69c1499	116	MODULE_DEVICE_TABLE(usb, id_table_combined);
1da177e4 LT	117
1da177e4 LT	118	static struct usb_driver belkin_driver = {
1da177e4 LT	119	.name = "belkin",
	120	.probe = usb_serial_probe,
	121	.disconnect = usb_serial_disconnect,
	122	.id_table = id_table_combined,
ba9dc657	123	.no_dynamic_id = 1,
1da177e4 LT	124	};
	125
	126	/* All of the device info needed for the serial converters */
ea65370d	127	static struct usb_serial_driver belkin_device = {
18fcac35 GKH	128	.driver = {
18fcac35 GKH	129	.owner = THIS_MODULE,
269bda1c	130	.name = "belkin",
18fcac35	131	},
269bda1c	132	.description = "Belkin / Peracom / GoHubs USB Serial Adapter",
d9b1b787	133	.usb_driver = &belkin_driver,
1da177e4	134	.id_table = id_table_combined,
1da177e4 LT	135	.num_ports = 1,
	136	.open = belkin_sa_open,
	137	.close = belkin_sa_close,
b69c1499 AC	138	.read_int_callback = belkin_sa_read_int_callback,
b69c1499 AC	139	/* How we get the status info */
1da177e4 LT	140	.set_termios = belkin_sa_set_termios,
	141	.break_ctl = belkin_sa_break_ctl,
	142	.tiocmget = belkin_sa_tiocmget,
	143	.tiocmset = belkin_sa_tiocmset,
	144	.attach = belkin_sa_startup,
f9c99bb8	145	.release = belkin_sa_release,
1da177e4 LT	146	};
	147
	148
	149	struct belkin_sa_private {
	150	spinlock_t lock;
	151	unsigned long control_state;
	152	unsigned char last_lsr;
	153	unsigned char last_msr;
	154	int bad_flow_control;
	155	};
	156
	157
	158	/*
	159	* ***************************************************************************
	160	* Belkin USB Serial Adapter F5U103 specific driver functions
	161	* ***************************************************************************
	162	*/
	163
	164	#define WDR_TIMEOUT 5000 /* default urb timeout */
	165
	166	/* assumes that struct usb_serial serial is available /
b69c1499	167	#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
1da177e4 LT	168	(c), BELKIN_SA_SET_REQUEST_TYPE, \
	169	(v), 0, NULL, 0, WDR_TIMEOUT)
	170
	171	/* do some startup allocations not currently performed by usb_serial_probe() */
b69c1499	172	static int belkin_sa_startup(struct usb_serial *serial)
1da177e4 LT	173	{
	174	struct usb_device *dev = serial->dev;
	175	struct belkin_sa_private *priv;
	176
	177	/* allocate the private data structure */
	178	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
	179	if (!priv)
b69c1499	180	return -1; /* error */
1da177e4 LT	181	/* set initial values for control structures */
	182	spin_lock_init(&priv->lock);
	183	priv->control_state = 0;
	184	priv->last_lsr = 0;
	185	priv->last_msr = 0;
	186	/* see comments at top of file */
b69c1499 AC	187	priv->bad_flow_control =
b69c1499 AC	188	(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
c197a8db	189	dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
b69c1499 AC	190	le16_to_cpu(dev->descriptor.bcdDevice),
b69c1499 AC	191	priv->bad_flow_control);
1da177e4 LT	192
	193	init_waitqueue_head(&serial->port[0]->write_wait);
	194	usb_set_serial_port_data(serial->port[0], priv);
b69c1499 AC	195
b69c1499 AC	196	return 0;
1da177e4 LT	197	}
	198
	199
f9c99bb8	200	static void belkin_sa_release(struct usb_serial *serial)
1da177e4 LT	201	{
	202	struct belkin_sa_private *priv;
	203	int i;
b69c1499 AC	204
b69c1499 AC	205	dbg("%s", __func__);
1da177e4	206
b69c1499	207	for (i = 0; i < serial->num_ports; ++i) {
1da177e4 LT	208	/* My special items, the standard routines free my urbs */
1da177e4 LT	209	priv = usb_get_serial_port_data(serial->port[i]);
1bc3c9e1	210	kfree(priv);
1da177e4 LT	211	}
	212	}
	213
	214
b69c1499	215	static int belkin_sa_open(struct tty_struct *tty,
a509a7e4	216	struct usb_serial_port *port)
1da177e4 LT	217	{
	218	int retval = 0;
	219
441b62c1	220	dbg("%s port %d", __func__, port->number);
1da177e4 LT	221
	222	/Start reading from the device/
	223	/* TODO: Look at possibility of submitting multiple URBs to device to
	224	* enhance buffering. Win trace shows 16 initial read URBs.
	225	*/
	226	port->read_urb->dev = port->serial->dev;
	227	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
	228	if (retval) {
194343d9	229	dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
1da177e4 LT	230	goto exit;
	231	}
	232
	233	port->interrupt_in_urb->dev = port->serial->dev;
	234	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
	235	if (retval) {
	236	usb_kill_urb(port->read_urb);
194343d9	237	dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
1da177e4 LT	238	}
	239
	240	exit:
	241	return retval;
	242	} /* belkin_sa_open */
	243
	244
335f8514	245	static void belkin_sa_close(struct usb_serial_port *port)
1da177e4	246	{
441b62c1	247	dbg("%s port %d", __func__, port->number);
1da177e4	248
f26788da	249	usb_serial_generic_close(port);
1da177e4 LT	250	usb_kill_urb(port->interrupt_in_urb);
	251	} /* belkin_sa_close */
	252
	253
95da310e	254	static void belkin_sa_read_int_callback(struct urb *urb)
1da177e4	255	{
cdc97792	256	struct usb_serial_port *port = urb->context;
1da177e4 LT	257	struct belkin_sa_private *priv;
	258	unsigned char *data = urb->transfer_buffer;
	259	int retval;
f26aad25	260	int status = urb->status;
1da177e4 LT	261	unsigned long flags;
1da177e4 LT	262
f26aad25	263	switch (status) {
1da177e4 LT	264	case 0:
	265	/* success */
	266	break;
	267	case -ECONNRESET:
	268	case -ENOENT:
	269	case -ESHUTDOWN:
	270	/* this urb is terminated, clean up */
f26aad25	271	dbg("%s - urb shutting down with status: %d",
441b62c1	272	__func__, status);
1da177e4 LT	273	return;
1da177e4 LT	274	default:
f26aad25	275	dbg("%s - nonzero urb status received: %d",
441b62c1	276	__func__, status);
1da177e4 LT	277	goto exit;
	278	}
	279
b69c1499 AC	280	usb_serial_debug_data(debug, &port->dev, __func__,
b69c1499 AC	281	urb->actual_length, data);
1da177e4 LT	282
	283	/* Handle known interrupt data */
	284	/* ignore data[0] and data[1] */
	285
	286	priv = usb_get_serial_port_data(port);
	287	spin_lock_irqsave(&priv->lock, flags);
	288	priv->last_msr = data[BELKIN_SA_MSR_INDEX];
b69c1499	289
1da177e4 LT	290	/* Record Control Line states */
	291	if (priv->last_msr & BELKIN_SA_MSR_DSR)
	292	priv->control_state \|= TIOCM_DSR;
	293	else
	294	priv->control_state &= ~TIOCM_DSR;
	295
	296	if (priv->last_msr & BELKIN_SA_MSR_CTS)
	297	priv->control_state \|= TIOCM_CTS;
	298	else
	299	priv->control_state &= ~TIOCM_CTS;
	300
	301	if (priv->last_msr & BELKIN_SA_MSR_RI)
	302	priv->control_state \|= TIOCM_RI;
	303	else
	304	priv->control_state &= ~TIOCM_RI;
	305
	306	if (priv->last_msr & BELKIN_SA_MSR_CD)
	307	priv->control_state \|= TIOCM_CD;
	308	else
	309	priv->control_state &= ~TIOCM_CD;
	310
	311	/* Now to report any errors */
	312	priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
	313	#if 0
	314	/*
	315	* fill in the flip buffer here, but I do not know the relation
	316	* to the current/next receive buffer or characters. I need
	317	* to look in to this before committing any code.
	318	*/
	319	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
4a90f09b	320	tty = tty_port_tty_get(&port->port);
1da177e4 LT	321	/* Overrun Error */
	322	if (priv->last_lsr & BELKIN_SA_LSR_OE) {
	323	}
	324	/* Parity Error */
	325	if (priv->last_lsr & BELKIN_SA_LSR_PE) {
	326	}
	327	/* Framing Error */
	328	if (priv->last_lsr & BELKIN_SA_LSR_FE) {
	329	}
	330	/* Break Indicator */
	331	if (priv->last_lsr & BELKIN_SA_LSR_BI) {
	332	}
4a90f09b	333	tty_kref_put(tty);
1da177e4 LT	334	}
	335	#endif
	336	spin_unlock_irqrestore(&priv->lock, flags);
	337	exit:
b69c1499	338	retval = usb_submit_urb(urb, GFP_ATOMIC);
1da177e4	339	if (retval)
194343d9 GKH	340	dev_err(&port->dev, "%s - usb_submit_urb failed with "
194343d9 GKH	341	"result %d\n", __func__, retval);
1da177e4 LT	342	}
1da177e4 LT	343
95da310e AC	344	static void belkin_sa_set_termios(struct tty_struct *tty,
95da310e AC	345	struct usb_serial_port port, struct ktermios old_termios)
1da177e4 LT	346	{
	347	struct usb_serial *serial = port->serial;
	348	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	349	unsigned int iflag;
	350	unsigned int cflag;
	351	unsigned int old_iflag = 0;
	352	unsigned int old_cflag = 0;
	353	__u16 urb_value = 0; /* Will hold the new flags */
	354	unsigned long flags;
	355	unsigned long control_state;
	356	int bad_flow_control;
9a8baec7	357	speed_t baud;
95da310e	358	struct ktermios *termios = tty->termios;
b69c1499	359
3ec466b4 AC	360	iflag = termios->c_iflag;
3ec466b4 AC	361	cflag = termios->c_cflag;
1da177e4	362
3ec466b4	363	termios->c_cflag &= ~CMSPAR;
1da177e4 LT	364
	365	/* get a local copy of the current port settings */
	366	spin_lock_irqsave(&priv->lock, flags);
	367	control_state = priv->control_state;
	368	bad_flow_control = priv->bad_flow_control;
	369	spin_unlock_irqrestore(&priv->lock, flags);
b69c1499	370
9a8baec7 AC	371	old_iflag = old_termios->c_iflag;
9a8baec7 AC	372	old_cflag = old_termios->c_cflag;
1da177e4 LT	373
1da177e4 LT	374	/* Set the baud rate */
3ec466b4	375	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
1da177e4	376	/* reassert DTR and (maybe) RTS on transition from B0 */
b69c1499	377	if ((old_cflag & CBAUD) == B0) {
1da177e4 LT	378	control_state \|= (TIOCM_DTR\|TIOCM_RTS);
1da177e4 LT	379	if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
194343d9	380	dev_err(&port->dev, "Set DTR error\n");
1da177e4	381	/* don't set RTS if using hardware flow control */
3ec466b4	382	if (!(old_cflag & CRTSCTS))
b69c1499 AC	383	if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
b69c1499 AC	384	, 1) < 0)
194343d9	385	dev_err(&port->dev, "Set RTS error\n");
1da177e4	386	}
9a8baec7	387	}
1da177e4	388
95da310e	389	baud = tty_get_baud_rate(tty);
3ec466b4 AC	390	if (baud) {
	391	urb_value = BELKIN_SA_BAUD(baud);
	392	/* Clip to maximum speed */
	393	if (urb_value == 0)
	394	urb_value = 1;
	395	/* Turn it back into a resulting real baud rate */
	396	baud = BELKIN_SA_BAUD(urb_value);
	397
	398	/* Report the actual baud rate back to the caller */
95da310e	399	tty_encode_baud_rate(tty, baud, baud);
9a8baec7	400	if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
194343d9	401	dev_err(&port->dev, "Set baudrate error\n");
9a8baec7 AC	402	} else {
9a8baec7 AC	403	/* Disable flow control */
b69c1499 AC	404	if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
b69c1499 AC	405	BELKIN_SA_FLOW_NONE) < 0)
194343d9	406	dev_err(&port->dev, "Disable flowcontrol error\n");
9a8baec7 AC	407	/* Drop RTS and DTR */
	408	control_state &= ~(TIOCM_DTR \| TIOCM_RTS);
	409	if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
194343d9	410	dev_err(&port->dev, "DTR LOW error\n");
9a8baec7	411	if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
194343d9	412	dev_err(&port->dev, "RTS LOW error\n");
1da177e4 LT	413	}
	414
	415	/* set the parity */
b69c1499	416	if ((cflag ^ old_cflag) & (PARENB \| PARODD)) {
1da177e4	417	if (cflag & PARENB)
b69c1499 AC	418	urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD
b69c1499 AC	419	: BELKIN_SA_PARITY_EVEN;
1da177e4 LT	420	else
	421	urb_value = BELKIN_SA_PARITY_NONE;
	422	if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
194343d9	423	dev_err(&port->dev, "Set parity error\n");
1da177e4 LT	424	}
	425
	426	/* set the number of data bits */
b69c1499	427	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
1da177e4	428	switch (cflag & CSIZE) {
b69c1499 AC	429	case CS5:
	430	urb_value = BELKIN_SA_DATA_BITS(5);
	431	break;
	432	case CS6:
	433	urb_value = BELKIN_SA_DATA_BITS(6);
	434	break;
	435	case CS7:
	436	urb_value = BELKIN_SA_DATA_BITS(7);
	437	break;
	438	case CS8:
	439	urb_value = BELKIN_SA_DATA_BITS(8);
	440	break;
	441	default: dbg("CSIZE was not CS5-CS8, using default of 8");
	442	urb_value = BELKIN_SA_DATA_BITS(8);
	443	break;
1da177e4 LT	444	}
1da177e4 LT	445	if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
194343d9	446	dev_err(&port->dev, "Set data bits error\n");
1da177e4 LT	447	}
	448
	449	/* set the number of stop bits */
b69c1499 AC	450	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
	451	urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
	452	: BELKIN_SA_STOP_BITS(1);
	453	if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
	454	urb_value) < 0)
194343d9	455	dev_err(&port->dev, "Set stop bits error\n");
1da177e4 LT	456	}
	457
	458	/* Set flow control */
b69c1499 AC	459	if (((iflag ^ old_iflag) & (IXOFF \| IXON)) \|\|
b69c1499 AC	460	((cflag ^ old_cflag) & CRTSCTS)) {
1da177e4 LT	461	urb_value = 0;
	462	if ((iflag & IXOFF) \|\| (iflag & IXON))
	463	urb_value \|= (BELKIN_SA_FLOW_OXON \| BELKIN_SA_FLOW_IXON);
	464	else
	465	urb_value &= ~(BELKIN_SA_FLOW_OXON \| BELKIN_SA_FLOW_IXON);
	466
	467	if (cflag & CRTSCTS)
	468	urb_value \|= (BELKIN_SA_FLOW_OCTS \| BELKIN_SA_FLOW_IRTS);
	469	else
	470	urb_value &= ~(BELKIN_SA_FLOW_OCTS \| BELKIN_SA_FLOW_IRTS);
	471
	472	if (bad_flow_control)
	473	urb_value &= ~(BELKIN_SA_FLOW_IRTS);
	474
	475	if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
194343d9	476	dev_err(&port->dev, "Set flow control error\n");
1da177e4 LT	477	}
	478
	479	/* save off the modified port settings */
	480	spin_lock_irqsave(&priv->lock, flags);
	481	priv->control_state = control_state;
	482	spin_unlock_irqrestore(&priv->lock, flags);
	483	} /* belkin_sa_set_termios */
	484
	485
95da310e	486	static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
1da177e4	487	{
95da310e	488	struct usb_serial_port *port = tty->driver_data;
1da177e4 LT	489	struct usb_serial *serial = port->serial;
	490
	491	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
194343d9	492	dev_err(&port->dev, "Set break_ctl %d\n", break_state);
1da177e4 LT	493	}
	494
	495
95da310e	496	static int belkin_sa_tiocmget(struct tty_struct tty, struct file file)
1da177e4	497	{
95da310e	498	struct usb_serial_port *port = tty->driver_data;
1da177e4 LT	499	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	500	unsigned long control_state;
	501	unsigned long flags;
b69c1499	502
441b62c1	503	dbg("%s", __func__);
1da177e4 LT	504
	505	spin_lock_irqsave(&priv->lock, flags);
	506	control_state = priv->control_state;
	507	spin_unlock_irqrestore(&priv->lock, flags);
	508
	509	return control_state;
	510	}
	511
	512
95da310e	513	static int belkin_sa_tiocmset(struct tty_struct tty, struct file file,
1da177e4 LT	514	unsigned int set, unsigned int clear)
1da177e4 LT	515	{
95da310e	516	struct usb_serial_port *port = tty->driver_data;
1da177e4 LT	517	struct usb_serial *serial = port->serial;
	518	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
	519	unsigned long control_state;
	520	unsigned long flags;
	521	int retval;
	522	int rts = 0;
	523	int dtr = 0;
b69c1499	524
441b62c1	525	dbg("%s", __func__);
1da177e4 LT	526
	527	spin_lock_irqsave(&priv->lock, flags);
	528	control_state = priv->control_state;
	529
	530	if (set & TIOCM_RTS) {
	531	control_state \|= TIOCM_RTS;
	532	rts = 1;
	533	}
	534	if (set & TIOCM_DTR) {
	535	control_state \|= TIOCM_DTR;
	536	dtr = 1;
	537	}
	538	if (clear & TIOCM_RTS) {
	539	control_state &= ~TIOCM_RTS;
	540	rts = 0;
	541	}
	542	if (clear & TIOCM_DTR) {
	543	control_state &= ~TIOCM_DTR;
	544	dtr = 0;
	545	}
	546
	547	priv->control_state = control_state;
	548	spin_unlock_irqrestore(&priv->lock, flags);
	549
	550	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
	551	if (retval < 0) {
194343d9	552	dev_err(&port->dev, "Set RTS error %d\n", retval);
1da177e4 LT	553	goto exit;
	554	}
	555
	556	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
	557	if (retval < 0) {
194343d9	558	dev_err(&port->dev, "Set DTR error %d\n", retval);
1da177e4 LT	559	goto exit;
	560	}
	561	exit:
	562	return retval;
	563	}
	564
	565
95da310e	566	static int __init belkin_sa_init(void)
1da177e4 LT	567	{
	568	int retval;
	569	retval = usb_serial_register(&belkin_device);
	570	if (retval)
	571	goto failed_usb_serial_register;
	572	retval = usb_register(&belkin_driver);
	573	if (retval)
	574	goto failed_usb_register;
c197a8db GKH	575	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
c197a8db GKH	576	DRIVER_DESC "\n");
1da177e4 LT	577	return 0;
	578	failed_usb_register:
	579	usb_serial_deregister(&belkin_device);
	580	failed_usb_serial_register:
	581	return retval;
	582	}
	583
	584
	585	static void __exit belkin_sa_exit (void)
	586	{
b69c1499	587	usb_deregister(&belkin_driver);
95da310e	588	usb_serial_deregister(&belkin_device);
1da177e4 LT	589	}
	590
	591
b69c1499 AC	592	module_init(belkin_sa_init);
b69c1499 AC	593	module_exit(belkin_sa_exit);
1da177e4	594
b69c1499 AC	595	MODULE_AUTHOR(DRIVER_AUTHOR);
	596	MODULE_DESCRIPTION(DRIVER_DESC);
	597	MODULE_VERSION(DRIVER_VERSION);
1da177e4 LT	598	MODULE_LICENSE("GPL");
	599
	600	module_param(debug, bool, S_IRUGO \| S_IWUSR);
	601	MODULE_PARM_DESC(debug, "Debug enabled or not");