Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * IPWireless 3G UMTS TDD Modem driver (USB connected) | |
3 | * | |
4 | * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za> | |
5 | * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * All information about the device was acquired using SnoopyPro | |
13 | * on MSFT's O/S, and examing the MSFT drivers' debug output | |
14 | * (insanely left _on_ in the enduser version) | |
15 | * | |
16 | * It was written out of frustration with the IPWireless USB modem | |
17 | * supplied by Axity3G/Sentech South Africa not supporting | |
18 | * Linux whatsoever. | |
19 | * | |
20 | * Nobody provided any proprietary information that was not already | |
21 | * available for this device. | |
22 | * | |
23 | * The modem adheres to the "3GPP TS 27.007 AT command set for 3G | |
24 | * User Equipment (UE)" standard, available from | |
25 | * http://www.3gpp.org/ftp/Specs/html-info/27007.htm | |
26 | * | |
27 | * The code was only tested the IPWireless handheld modem distributed | |
28 | * in South Africa by Sentech. | |
29 | * | |
30 | * It may work for Woosh Inc in .nz too, as it appears they use the | |
31 | * same kit. | |
32 | * | |
33 | * There is still some work to be done in terms of handling | |
34 | * DCD, DTR, RTS, CTS which are currently faked. | |
35 | * It's good enough for PPP at this point. It's based off all kinds of | |
36 | * code found in usb/serial and usb/class | |
37 | * | |
38 | */ | |
39 | ||
40 | #include <linux/kernel.h> | |
41 | #include <linux/errno.h> | |
42 | #include <linux/init.h> | |
43 | #include <linux/slab.h> | |
44 | #include <linux/tty.h> | |
45 | #include <linux/tty_flip.h> | |
46 | #include <linux/module.h> | |
47 | #include <linux/spinlock.h> | |
48 | #include <linux/usb.h> | |
a969888c | 49 | #include <linux/usb/serial.h> |
1da177e4 | 50 | #include <asm/uaccess.h> |
1da177e4 LT |
51 | |
52 | /* | |
53 | * Version Information | |
54 | */ | |
55 | #define DRIVER_VERSION "v0.3" | |
56 | #define DRIVER_AUTHOR "Roelf Diedericks" | |
57 | #define DRIVER_DESC "IPWireless tty driver" | |
58 | ||
59 | #define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */ | |
60 | #define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */ | |
61 | ||
62 | #define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */ | |
63 | ||
64 | ||
65 | /* Message sizes */ | |
66 | #define EVENT_BUFFER_SIZE 0xFF | |
67 | #define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) | |
68 | #define NUM_BULK_URBS 24 | |
69 | #define NUM_CONTROL_URBS 16 | |
70 | ||
71 | /* vendor/product pairs that are known work with this driver*/ | |
72 | #define IPW_VID 0x0bc3 | |
73 | #define IPW_PID 0x0001 | |
74 | ||
75 | ||
76 | /* Vendor commands: */ | |
77 | ||
78 | /* baud rates */ | |
79 | enum { | |
80 | ipw_sio_b256000 = 0x000e, | |
81 | ipw_sio_b128000 = 0x001d, | |
82 | ipw_sio_b115200 = 0x0020, | |
83 | ipw_sio_b57600 = 0x0040, | |
84 | ipw_sio_b56000 = 0x0042, | |
85 | ipw_sio_b38400 = 0x0060, | |
86 | ipw_sio_b19200 = 0x00c0, | |
87 | ipw_sio_b14400 = 0x0100, | |
88 | ipw_sio_b9600 = 0x0180, | |
89 | ipw_sio_b4800 = 0x0300, | |
90 | ipw_sio_b2400 = 0x0600, | |
91 | ipw_sio_b1200 = 0x0c00, | |
92 | ipw_sio_b600 = 0x1800 | |
93 | }; | |
94 | ||
95 | /* data bits */ | |
96 | #define ipw_dtb_7 0x700 | |
97 | #define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1 | |
98 | // I mean, is there a point to any other setting these days? :) | |
99 | ||
100 | /* usb control request types : */ | |
101 | #define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off) | |
102 | #define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx | |
103 | #define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x | |
104 | #define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx | |
105 | #define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0 | |
106 | #define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open) | |
107 | #define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge | |
108 | #define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes | |
109 | #define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes, | |
110 | // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 | |
111 | ||
112 | /* values used for request IPW_SIO_SET_PIN */ | |
113 | #define IPW_PIN_SETDTR 0x101 | |
114 | #define IPW_PIN_SETRTS 0x202 | |
115 | #define IPW_PIN_CLRDTR 0x100 | |
116 | #define IPW_PIN_CLRRTS 0x200 // unconfirmed | |
117 | ||
118 | /* values used for request IPW_SIO_RXCTL */ | |
119 | #define IPW_RXBULK_ON 1 | |
120 | #define IPW_RXBULK_OFF 0 | |
121 | ||
122 | /* various 16 byte hardcoded transferbuffers used by flow control */ | |
123 | #define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } | |
124 | ||
125 | /* Interpretation of modem status lines */ | |
126 | /* These need sorting out by individually connecting pins and checking | |
127 | * results. FIXME! | |
128 | * When data is being sent we see 0x30 in the lower byte; this must | |
129 | * contain DSR and CTS ... | |
130 | */ | |
131 | #define IPW_DSR ((1<<4) | (1<<5)) | |
132 | #define IPW_CTS ((1<<5) | (1<<4)) | |
133 | ||
134 | #define IPW_WANTS_TO_SEND 0x30 | |
135 | //#define IPW_DTR /* Data Terminal Ready */ | |
136 | //#define IPW_CTS /* Clear To Send */ | |
137 | //#define IPW_CD /* Carrier Detect */ | |
138 | //#define IPW_DSR /* Data Set Ready */ | |
139 | //#define IPW_RxD /* Receive pin */ | |
140 | ||
141 | //#define IPW_LE | |
142 | //#define IPW_RTS | |
143 | //#define IPW_ST | |
144 | //#define IPW_SR | |
145 | //#define IPW_RI /* Ring Indicator */ | |
146 | ||
147 | static struct usb_device_id usb_ipw_ids[] = { | |
148 | { USB_DEVICE(IPW_VID, IPW_PID) }, | |
149 | { }, | |
150 | }; | |
151 | ||
152 | MODULE_DEVICE_TABLE(usb, usb_ipw_ids); | |
153 | ||
154 | static struct usb_driver usb_ipw_driver = { | |
1da177e4 LT |
155 | .name = "ipwtty", |
156 | .probe = usb_serial_probe, | |
157 | .disconnect = usb_serial_disconnect, | |
158 | .id_table = usb_ipw_ids, | |
ba9dc657 | 159 | .no_dynamic_id = 1, |
1da177e4 LT |
160 | }; |
161 | ||
162 | static int debug; | |
163 | ||
7d12e780 | 164 | static void ipw_read_bulk_callback(struct urb *urb) |
1da177e4 LT |
165 | { |
166 | struct usb_serial_port *port = urb->context; | |
167 | unsigned char *data = urb->transfer_buffer; | |
168 | struct tty_struct *tty; | |
1da177e4 | 169 | int result; |
b4a15797 | 170 | int status = urb->status; |
1da177e4 LT |
171 | |
172 | dbg("%s - port %d", __FUNCTION__, port->number); | |
173 | ||
b4a15797 GKH |
174 | if (status) { |
175 | dbg("%s - nonzero read bulk status received: %d", | |
176 | __FUNCTION__, status); | |
1da177e4 LT |
177 | return; |
178 | } | |
179 | ||
180 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); | |
181 | ||
182 | tty = port->tty; | |
183 | if (tty && urb->actual_length) { | |
33f0f88f AC |
184 | tty_buffer_request_room(tty, urb->actual_length); |
185 | tty_insert_flip_string(tty, data, urb->actual_length); | |
1da177e4 LT |
186 | tty_flip_buffer_push(tty); |
187 | } | |
188 | ||
189 | /* Continue trying to always read */ | |
190 | usb_fill_bulk_urb (port->read_urb, port->serial->dev, | |
191 | usb_rcvbulkpipe(port->serial->dev, | |
192 | port->bulk_in_endpointAddress), | |
193 | port->read_urb->transfer_buffer, | |
194 | port->read_urb->transfer_buffer_length, | |
195 | ipw_read_bulk_callback, port); | |
196 | result = usb_submit_urb(port->read_urb, GFP_ATOMIC); | |
197 | if (result) | |
198 | dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); | |
199 | return; | |
200 | } | |
201 | ||
202 | static int ipw_open(struct usb_serial_port *port, struct file *filp) | |
203 | { | |
204 | struct usb_device *dev = port->serial->dev; | |
205 | u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; | |
206 | u8 *buf_flow_init; | |
207 | int result; | |
208 | ||
209 | dbg("%s", __FUNCTION__); | |
210 | ||
5d7efe5b | 211 | buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); |
1da177e4 LT |
212 | if (!buf_flow_init) |
213 | return -ENOMEM; | |
1da177e4 LT |
214 | |
215 | if (port->tty) | |
216 | port->tty->low_latency = 1; | |
217 | ||
218 | /* --1: Tell the modem to initialize (we think) From sniffs this is always the | |
219 | * first thing that gets sent to the modem during opening of the device */ | |
220 | dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__); | |
221 | result = usb_control_msg(dev, usb_sndctrlpipe(dev,0), | |
222 | IPW_SIO_INIT, | |
223 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
224 | 0, | |
225 | 0, /* index */ | |
226 | NULL, | |
227 | 0, | |
228 | 100000); | |
229 | if (result < 0) | |
898eb71c | 230 | dev_err(&port->dev, "Init of modem failed (error = %d)\n", result); |
1da177e4 LT |
231 | |
232 | /* reset the bulk pipes */ | |
233 | usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); | |
234 | usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); | |
235 | ||
236 | /*--2: Start reading from the device */ | |
237 | dbg("%s: setting up bulk read callback",__FUNCTION__); | |
238 | usb_fill_bulk_urb(port->read_urb, dev, | |
239 | usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), | |
240 | port->bulk_in_buffer, | |
241 | port->bulk_in_size, | |
242 | ipw_read_bulk_callback, port); | |
243 | result = usb_submit_urb(port->read_urb, GFP_KERNEL); | |
244 | if (result < 0) | |
245 | dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result); | |
246 | ||
247 | /*--3: Tell the modem to open the floodgates on the rx bulk channel */ | |
248 | dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__); | |
249 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
250 | IPW_SIO_RXCTL, | |
251 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
252 | IPW_RXBULK_ON, | |
253 | 0, /* index */ | |
254 | NULL, | |
255 | 0, | |
256 | 100000); | |
257 | if (result < 0) | |
898eb71c | 258 | dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result); |
1da177e4 LT |
259 | |
260 | /*--4: setup the initial flowcontrol */ | |
261 | dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init); | |
262 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
263 | IPW_SIO_HANDFLOW, | |
264 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
265 | 0, | |
266 | 0, | |
267 | buf_flow_init, | |
268 | 0x10, | |
269 | 200000); | |
270 | if (result < 0) | |
898eb71c | 271 | dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result); |
1da177e4 LT |
272 | |
273 | ||
274 | /*--5: raise the dtr */ | |
275 | dbg("%s:raising dtr",__FUNCTION__); | |
276 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
277 | IPW_SIO_SET_PIN, | |
278 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
279 | IPW_PIN_SETDTR, | |
280 | 0, | |
281 | NULL, | |
282 | 0, | |
283 | 200000); | |
284 | if (result < 0) | |
898eb71c | 285 | dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); |
1da177e4 LT |
286 | |
287 | /*--6: raise the rts */ | |
288 | dbg("%s:raising rts",__FUNCTION__); | |
289 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
290 | IPW_SIO_SET_PIN, | |
291 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
292 | IPW_PIN_SETRTS, | |
293 | 0, | |
294 | NULL, | |
295 | 0, | |
296 | 200000); | |
297 | if (result < 0) | |
898eb71c | 298 | dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); |
1da177e4 LT |
299 | |
300 | kfree(buf_flow_init); | |
301 | return 0; | |
302 | } | |
303 | ||
304 | static void ipw_close(struct usb_serial_port *port, struct file * filp) | |
305 | { | |
306 | struct usb_device *dev = port->serial->dev; | |
307 | int result; | |
308 | ||
309 | if (tty_hung_up_p(filp)) { | |
310 | dbg("%s: tty_hung_up_p ...", __FUNCTION__); | |
311 | return; | |
312 | } | |
313 | ||
314 | /*--1: drop the dtr */ | |
315 | dbg("%s:dropping dtr",__FUNCTION__); | |
316 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
317 | IPW_SIO_SET_PIN, | |
318 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
319 | IPW_PIN_CLRDTR, | |
320 | 0, | |
321 | NULL, | |
322 | 0, | |
323 | 200000); | |
324 | if (result < 0) | |
898eb71c | 325 | dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result); |
1da177e4 LT |
326 | |
327 | /*--2: drop the rts */ | |
328 | dbg("%s:dropping rts",__FUNCTION__); | |
329 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
330 | IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
331 | IPW_PIN_CLRRTS, | |
332 | 0, | |
333 | NULL, | |
334 | 0, | |
335 | 200000); | |
336 | if (result < 0) | |
898eb71c | 337 | dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); |
1da177e4 LT |
338 | |
339 | ||
340 | /*--3: purge */ | |
341 | dbg("%s:sending purge",__FUNCTION__); | |
342 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
343 | IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
344 | 0x03, | |
345 | 0, | |
346 | NULL, | |
347 | 0, | |
348 | 200000); | |
349 | if (result < 0) | |
898eb71c | 350 | dev_err(&port->dev, "purge failed (error = %d)\n", result); |
1da177e4 LT |
351 | |
352 | ||
353 | /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */ | |
354 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
355 | IPW_SIO_RXCTL, | |
356 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
357 | IPW_RXBULK_OFF, | |
358 | 0, /* index */ | |
359 | NULL, | |
360 | 0, | |
361 | 100000); | |
362 | ||
363 | if (result < 0) | |
898eb71c | 364 | dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result); |
1da177e4 LT |
365 | |
366 | /* shutdown any in-flight urbs that we know about */ | |
367 | usb_kill_urb(port->read_urb); | |
368 | usb_kill_urb(port->write_urb); | |
369 | } | |
370 | ||
7d12e780 | 371 | static void ipw_write_bulk_callback(struct urb *urb) |
1da177e4 LT |
372 | { |
373 | struct usb_serial_port *port = urb->context; | |
b4a15797 | 374 | int status = urb->status; |
1da177e4 LT |
375 | |
376 | dbg("%s", __FUNCTION__); | |
377 | ||
b2f1b0d4 BO |
378 | port->write_urb_busy = 0; |
379 | ||
b4a15797 GKH |
380 | if (status) |
381 | dbg("%s - nonzero write bulk status received: %d", | |
382 | __FUNCTION__, status); | |
1da177e4 | 383 | |
cf2c7481 | 384 | usb_serial_port_softint(port); |
1da177e4 LT |
385 | } |
386 | ||
387 | static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count) | |
388 | { | |
389 | struct usb_device *dev = port->serial->dev; | |
390 | int ret; | |
391 | ||
392 | dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__, | |
393 | count, in_interrupt() ); | |
394 | ||
395 | if (count == 0) { | |
396 | dbg("%s - write request of 0 bytes", __FUNCTION__); | |
397 | return 0; | |
398 | } | |
507ca9bc | 399 | |
e81ee637 | 400 | spin_lock_bh(&port->lock); |
507ca9bc | 401 | if (port->write_urb_busy) { |
e81ee637 | 402 | spin_unlock_bh(&port->lock); |
507ca9bc | 403 | dbg("%s - already writing", __FUNCTION__); |
1da177e4 | 404 | return 0; |
507ca9bc GKH |
405 | } |
406 | port->write_urb_busy = 1; | |
e81ee637 | 407 | spin_unlock_bh(&port->lock); |
1da177e4 LT |
408 | |
409 | count = min(count, port->bulk_out_size); | |
410 | memcpy(port->bulk_out_buffer, buf, count); | |
411 | ||
412 | dbg("%s count now:%d", __FUNCTION__, count); | |
507ca9bc | 413 | |
1da177e4 LT |
414 | usb_fill_bulk_urb(port->write_urb, dev, |
415 | usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), | |
416 | port->write_urb->transfer_buffer, | |
417 | count, | |
418 | ipw_write_bulk_callback, | |
419 | port); | |
420 | ||
421 | ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
422 | if (ret != 0) { | |
507ca9bc | 423 | port->write_urb_busy = 0; |
1da177e4 LT |
424 | dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret); |
425 | return ret; | |
426 | } | |
427 | ||
428 | dbg("%s returning %d", __FUNCTION__, count); | |
429 | return count; | |
430 | } | |
431 | ||
432 | static int ipw_probe(struct usb_serial_port *port) | |
433 | { | |
434 | return 0; | |
435 | } | |
436 | ||
437 | static int ipw_disconnect(struct usb_serial_port *port) | |
438 | { | |
439 | usb_set_serial_port_data(port, NULL); | |
440 | return 0; | |
441 | } | |
442 | ||
ea65370d | 443 | static struct usb_serial_driver ipw_device = { |
18fcac35 GKH |
444 | .driver = { |
445 | .owner = THIS_MODULE, | |
269bda1c | 446 | .name = "ipw", |
18fcac35 | 447 | }, |
269bda1c | 448 | .description = "IPWireless converter", |
d9b1b787 | 449 | .usb_driver = &usb_ipw_driver, |
1da177e4 | 450 | .id_table = usb_ipw_ids, |
1da177e4 LT |
451 | .num_ports = 1, |
452 | .open = ipw_open, | |
453 | .close = ipw_close, | |
454 | .port_probe = ipw_probe, | |
455 | .port_remove = ipw_disconnect, | |
456 | .write = ipw_write, | |
457 | .write_bulk_callback = ipw_write_bulk_callback, | |
458 | .read_bulk_callback = ipw_read_bulk_callback, | |
459 | }; | |
460 | ||
461 | ||
462 | ||
463 | static int usb_ipw_init(void) | |
464 | { | |
465 | int retval; | |
466 | ||
467 | retval = usb_serial_register(&ipw_device); | |
468 | if (retval) | |
469 | return retval; | |
470 | retval = usb_register(&usb_ipw_driver); | |
471 | if (retval) { | |
472 | usb_serial_deregister(&ipw_device); | |
473 | return retval; | |
474 | } | |
475 | info(DRIVER_DESC " " DRIVER_VERSION); | |
476 | return 0; | |
477 | } | |
478 | ||
479 | static void usb_ipw_exit(void) | |
480 | { | |
481 | usb_deregister(&usb_ipw_driver); | |
482 | usb_serial_deregister(&ipw_device); | |
483 | } | |
484 | ||
485 | module_init(usb_ipw_init); | |
486 | module_exit(usb_ipw_exit); | |
487 | ||
488 | /* Module information */ | |
489 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
490 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
491 | MODULE_LICENSE("GPL"); | |
492 | ||
493 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
494 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |