Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * USB Keyspan PDA / Xircom / Entregra Converter driver | |
3 | * | |
4 | * Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com> | |
5 | * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com> | |
6 | * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * See Documentation/usb/usb-serial.txt for more information on using this driver | |
14 | * | |
15 | * (09/07/2001) gkh | |
16 | * cleaned up the Xircom support. Added ids for Entregra device which is | |
17 | * the same as the Xircom device. Enabled the code to be compiled for | |
18 | * either Xircom or Keyspan devices. | |
19 | * | |
20 | * (08/11/2001) Cristian M. Craciunescu | |
21 | * support for Xircom PGSDB9 | |
22 | * | |
23 | * (05/31/2001) gkh | |
24 | * switched from using spinlock to a semaphore, which fixes lots of problems. | |
25 | * | |
26 | * (04/08/2001) gb | |
27 | * Identify version on module load. | |
28 | * | |
29 | * (11/01/2000) Adam J. Richter | |
30 | * usb_device_id table support | |
31 | * | |
32 | * (10/05/2000) gkh | |
33 | * Fixed bug with urb->dev not being set properly, now that the usb | |
34 | * core needs it. | |
35 | * | |
36 | * (08/28/2000) gkh | |
37 | * Added locks for SMP safeness. | |
38 | * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more | |
39 | * than once. | |
40 | * | |
41 | * (07/20/2000) borchers | |
42 | * - keyspan_pda_write no longer sleeps if it is called on interrupt time; | |
43 | * PPP and the line discipline with stty echo on can call write on | |
44 | * interrupt time and this would cause an oops if write slept | |
45 | * - if keyspan_pda_write is in an interrupt, it will not call | |
46 | * usb_control_msg (which sleeps) to query the room in the device | |
47 | * buffer, it simply uses the current room value it has | |
48 | * - if the urb is busy or if it is throttled keyspan_pda_write just | |
49 | * returns 0, rather than sleeping to wait for this to change; the | |
50 | * write_chan code in n_tty.c will sleep if needed before calling | |
51 | * keyspan_pda_write again | |
52 | * - if the device needs to be unthrottled, write now queues up the | |
53 | * call to usb_control_msg (which sleeps) to unthrottle the device | |
54 | * - the wakeups from keyspan_pda_write_bulk_callback are queued rather | |
55 | * than done directly from the callback to avoid the race in write_chan | |
56 | * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the | |
57 | * urb status is -EINPROGRESS, meaning it cannot write at the moment | |
58 | * | |
59 | * (07/19/2000) gkh | |
60 | * Added module_init and module_exit functions to handle the fact that this | |
61 | * driver is a loadable module now. | |
62 | * | |
63 | * (03/26/2000) gkh | |
64 | * Split driver up into device specific pieces. | |
65 | * | |
66 | */ | |
67 | ||
68 | ||
1da177e4 LT |
69 | #include <linux/kernel.h> |
70 | #include <linux/errno.h> | |
71 | #include <linux/init.h> | |
72 | #include <linux/slab.h> | |
73 | #include <linux/tty.h> | |
74 | #include <linux/tty_driver.h> | |
75 | #include <linux/tty_flip.h> | |
76 | #include <linux/module.h> | |
77 | #include <linux/spinlock.h> | |
78 | #include <linux/workqueue.h> | |
79 | #include <asm/uaccess.h> | |
80 | #include <linux/usb.h> | |
a969888c | 81 | #include <linux/usb/serial.h> |
1da177e4 LT |
82 | |
83 | static int debug; | |
84 | ||
85 | struct ezusb_hex_record { | |
86 | __u16 address; | |
87 | __u8 data_size; | |
88 | __u8 data[16]; | |
89 | }; | |
90 | ||
91 | /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ | |
92 | #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) | |
93 | #define KEYSPAN | |
94 | #else | |
95 | #undef KEYSPAN | |
96 | #endif | |
97 | #if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE) | |
98 | #define XIRCOM | |
99 | #else | |
100 | #undef XIRCOM | |
101 | #endif | |
102 | ||
103 | #ifdef KEYSPAN | |
104 | #include "keyspan_pda_fw.h" | |
105 | #endif | |
106 | ||
107 | #ifdef XIRCOM | |
108 | #include "xircom_pgs_fw.h" | |
109 | #endif | |
110 | ||
1da177e4 LT |
111 | /* |
112 | * Version Information | |
113 | */ | |
114 | #define DRIVER_VERSION "v1.1" | |
115 | #define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>" | |
116 | #define DRIVER_DESC "USB Keyspan PDA Converter driver" | |
117 | ||
118 | struct keyspan_pda_private { | |
119 | int tx_room; | |
120 | int tx_throttled; | |
121 | struct work_struct wakeup_work; | |
122 | struct work_struct unthrottle_work; | |
123 | }; | |
124 | ||
125 | ||
126 | #define KEYSPAN_VENDOR_ID 0x06cd | |
127 | #define KEYSPAN_PDA_FAKE_ID 0x0103 | |
128 | #define KEYSPAN_PDA_ID 0x0104 /* no clue */ | |
129 | ||
130 | /* For Xircom PGSDB9 and older Entregra version of the same device */ | |
131 | #define XIRCOM_VENDOR_ID 0x085a | |
132 | #define XIRCOM_FAKE_ID 0x8027 | |
133 | #define ENTREGRA_VENDOR_ID 0x1645 | |
134 | #define ENTREGRA_FAKE_ID 0x8093 | |
135 | ||
136 | static struct usb_device_id id_table_combined [] = { | |
137 | #ifdef KEYSPAN | |
138 | { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, | |
139 | #endif | |
140 | #ifdef XIRCOM | |
141 | { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, | |
142 | { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, | |
143 | #endif | |
144 | { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, | |
145 | { } /* Terminating entry */ | |
146 | }; | |
147 | ||
148 | MODULE_DEVICE_TABLE (usb, id_table_combined); | |
149 | ||
150 | static struct usb_driver keyspan_pda_driver = { | |
1da177e4 LT |
151 | .name = "keyspan_pda", |
152 | .probe = usb_serial_probe, | |
153 | .disconnect = usb_serial_disconnect, | |
154 | .id_table = id_table_combined, | |
ba9dc657 | 155 | .no_dynamic_id = 1, |
1da177e4 LT |
156 | }; |
157 | ||
158 | static struct usb_device_id id_table_std [] = { | |
159 | { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, | |
160 | { } /* Terminating entry */ | |
161 | }; | |
162 | ||
163 | #ifdef KEYSPAN | |
164 | static struct usb_device_id id_table_fake [] = { | |
165 | { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, | |
166 | { } /* Terminating entry */ | |
167 | }; | |
168 | #endif | |
169 | ||
170 | #ifdef XIRCOM | |
171 | static struct usb_device_id id_table_fake_xircom [] = { | |
172 | { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, | |
173 | { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, | |
174 | { } | |
175 | }; | |
176 | #endif | |
177 | ||
178 | static void keyspan_pda_wakeup_write( struct usb_serial_port *port ) | |
179 | { | |
180 | ||
181 | struct tty_struct *tty = port->tty; | |
182 | ||
183 | /* wake up port processes */ | |
184 | wake_up_interruptible( &port->write_wait ); | |
185 | ||
186 | /* wake up line discipline */ | |
187 | tty_wakeup(tty); | |
188 | } | |
189 | ||
190 | static void keyspan_pda_request_unthrottle( struct usb_serial *serial ) | |
191 | { | |
192 | int result; | |
193 | ||
194 | dbg(" request_unthrottle"); | |
195 | /* ask the device to tell us when the tx buffer becomes | |
196 | sufficiently empty */ | |
197 | result = usb_control_msg(serial->dev, | |
198 | usb_sndctrlpipe(serial->dev, 0), | |
199 | 7, /* request_unthrottle */ | |
200 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | |
201 | | USB_DIR_OUT, | |
202 | 16, /* value: threshold */ | |
203 | 0, /* index */ | |
204 | NULL, | |
205 | 0, | |
206 | 2000); | |
207 | if (result < 0) | |
208 | dbg("%s - error %d from usb_control_msg", | |
209 | __FUNCTION__, result); | |
210 | } | |
211 | ||
212 | ||
7d12e780 | 213 | static void keyspan_pda_rx_interrupt (struct urb *urb) |
1da177e4 LT |
214 | { |
215 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
216 | struct tty_struct *tty = port->tty; | |
217 | unsigned char *data = urb->transfer_buffer; | |
218 | int i; | |
219 | int status; | |
220 | struct keyspan_pda_private *priv; | |
221 | priv = usb_get_serial_port_data(port); | |
222 | ||
223 | switch (urb->status) { | |
224 | case 0: | |
225 | /* success */ | |
226 | break; | |
227 | case -ECONNRESET: | |
228 | case -ENOENT: | |
229 | case -ESHUTDOWN: | |
230 | /* this urb is terminated, clean up */ | |
231 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | |
232 | return; | |
233 | default: | |
234 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); | |
235 | goto exit; | |
236 | } | |
237 | ||
238 | /* see if the message is data or a status interrupt */ | |
239 | switch (data[0]) { | |
240 | case 0: | |
241 | /* rest of message is rx data */ | |
242 | if (urb->actual_length) { | |
243 | for (i = 1; i < urb->actual_length ; ++i) { | |
244 | tty_insert_flip_char(tty, data[i], 0); | |
245 | } | |
246 | tty_flip_buffer_push(tty); | |
247 | } | |
248 | break; | |
249 | case 1: | |
250 | /* status interrupt */ | |
251 | dbg(" rx int, d1=%d, d2=%d", data[1], data[2]); | |
252 | switch (data[1]) { | |
253 | case 1: /* modemline change */ | |
254 | break; | |
255 | case 2: /* tx unthrottle interrupt */ | |
256 | priv->tx_throttled = 0; | |
257 | /* queue up a wakeup at scheduler time */ | |
258 | schedule_work(&priv->wakeup_work); | |
259 | break; | |
260 | default: | |
261 | break; | |
262 | } | |
263 | break; | |
264 | default: | |
265 | break; | |
266 | } | |
267 | ||
268 | exit: | |
269 | status = usb_submit_urb (urb, GFP_ATOMIC); | |
270 | if (status) | |
271 | err ("%s - usb_submit_urb failed with result %d", | |
272 | __FUNCTION__, status); | |
273 | } | |
274 | ||
275 | ||
276 | static void keyspan_pda_rx_throttle (struct usb_serial_port *port) | |
277 | { | |
278 | /* stop receiving characters. We just turn off the URB request, and | |
279 | let chars pile up in the device. If we're doing hardware | |
280 | flowcontrol, the device will signal the other end when its buffer | |
281 | fills up. If we're doing XON/XOFF, this would be a good time to | |
282 | send an XOFF, although it might make sense to foist that off | |
283 | upon the device too. */ | |
284 | ||
285 | dbg("keyspan_pda_rx_throttle port %d", port->number); | |
286 | usb_kill_urb(port->interrupt_in_urb); | |
287 | } | |
288 | ||
289 | ||
290 | static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port) | |
291 | { | |
292 | /* just restart the receive interrupt URB */ | |
293 | dbg("keyspan_pda_rx_unthrottle port %d", port->number); | |
294 | port->interrupt_in_urb->dev = port->serial->dev; | |
295 | if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC)) | |
296 | dbg(" usb_submit_urb(read urb) failed"); | |
297 | return; | |
298 | } | |
299 | ||
300 | ||
301 | static int keyspan_pda_setbaud (struct usb_serial *serial, int baud) | |
302 | { | |
303 | int rc; | |
304 | int bindex; | |
305 | ||
306 | switch(baud) { | |
307 | case 110: bindex = 0; break; | |
308 | case 300: bindex = 1; break; | |
309 | case 1200: bindex = 2; break; | |
310 | case 2400: bindex = 3; break; | |
311 | case 4800: bindex = 4; break; | |
312 | case 9600: bindex = 5; break; | |
313 | case 19200: bindex = 6; break; | |
314 | case 38400: bindex = 7; break; | |
315 | case 57600: bindex = 8; break; | |
316 | case 115200: bindex = 9; break; | |
317 | default: return -EINVAL; | |
318 | } | |
319 | ||
320 | /* rather than figure out how to sleep while waiting for this | |
321 | to complete, I just use the "legacy" API. */ | |
322 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
323 | 0, /* set baud */ | |
324 | USB_TYPE_VENDOR | |
325 | | USB_RECIP_INTERFACE | |
326 | | USB_DIR_OUT, /* type */ | |
327 | bindex, /* value */ | |
328 | 0, /* index */ | |
329 | NULL, /* &data */ | |
330 | 0, /* size */ | |
331 | 2000); /* timeout */ | |
332 | return(rc); | |
333 | } | |
334 | ||
335 | ||
336 | static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state) | |
337 | { | |
338 | struct usb_serial *serial = port->serial; | |
339 | int value; | |
340 | int result; | |
341 | ||
342 | if (break_state == -1) | |
343 | value = 1; /* start break */ | |
344 | else | |
345 | value = 0; /* clear break */ | |
346 | result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
347 | 4, /* set break */ | |
348 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
349 | value, 0, NULL, 0, 2000); | |
350 | if (result < 0) | |
351 | dbg("%s - error %d from usb_control_msg", | |
352 | __FUNCTION__, result); | |
353 | /* there is something funky about this.. the TCSBRK that 'cu' performs | |
354 | ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 | |
355 | seconds apart, but it feels like the break sent isn't as long as it | |
356 | is on /dev/ttyS0 */ | |
357 | } | |
358 | ||
359 | ||
360 | static void keyspan_pda_set_termios (struct usb_serial_port *port, | |
361 | struct termios *old_termios) | |
362 | { | |
363 | struct usb_serial *serial = port->serial; | |
364 | unsigned int cflag = port->tty->termios->c_cflag; | |
365 | ||
366 | /* cflag specifies lots of stuff: number of stop bits, parity, number | |
367 | of data bits, baud. What can the device actually handle?: | |
368 | CSTOPB (1 stop bit or 2) | |
369 | PARENB (parity) | |
370 | CSIZE (5bit .. 8bit) | |
371 | There is minimal hw support for parity (a PSW bit seems to hold the | |
372 | parity of whatever is in the accumulator). The UART either deals | |
373 | with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data, | |
374 | 1 special, stop). So, with firmware changes, we could do: | |
375 | 8N1: 10 bit | |
376 | 8N2: 11 bit, extra bit always (mark?) | |
377 | 8[EOMS]1: 11 bit, extra bit is parity | |
378 | 7[EOMS]1: 10 bit, b0/b7 is parity | |
379 | 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?) | |
380 | ||
381 | HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS | |
382 | bit. | |
383 | ||
384 | For now, just do baud. */ | |
385 | ||
386 | switch (cflag & CBAUD) { | |
387 | /* we could support more values here, just need to calculate | |
388 | the necessary divisors in the firmware. <asm/termbits.h> | |
389 | has the Bnnn constants. */ | |
390 | case B110: keyspan_pda_setbaud(serial, 110); break; | |
391 | case B300: keyspan_pda_setbaud(serial, 300); break; | |
392 | case B1200: keyspan_pda_setbaud(serial, 1200); break; | |
393 | case B2400: keyspan_pda_setbaud(serial, 2400); break; | |
394 | case B4800: keyspan_pda_setbaud(serial, 4800); break; | |
395 | case B9600: keyspan_pda_setbaud(serial, 9600); break; | |
396 | case B19200: keyspan_pda_setbaud(serial, 19200); break; | |
397 | case B38400: keyspan_pda_setbaud(serial, 38400); break; | |
398 | case B57600: keyspan_pda_setbaud(serial, 57600); break; | |
399 | case B115200: keyspan_pda_setbaud(serial, 115200); break; | |
400 | default: dbg("can't handle requested baud rate"); break; | |
401 | } | |
402 | } | |
403 | ||
404 | ||
405 | /* modem control pins: DTR and RTS are outputs and can be controlled. | |
406 | DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be | |
407 | read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */ | |
408 | ||
409 | static int keyspan_pda_get_modem_info(struct usb_serial *serial, | |
410 | unsigned char *value) | |
411 | { | |
412 | int rc; | |
413 | unsigned char data; | |
414 | rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
415 | 3, /* get pins */ | |
416 | USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, | |
417 | 0, 0, &data, 1, 2000); | |
418 | if (rc > 0) | |
419 | *value = data; | |
420 | return rc; | |
421 | } | |
422 | ||
423 | ||
424 | static int keyspan_pda_set_modem_info(struct usb_serial *serial, | |
425 | unsigned char value) | |
426 | { | |
427 | int rc; | |
428 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
429 | 3, /* set pins */ | |
430 | USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT, | |
431 | value, 0, NULL, 0, 2000); | |
432 | return rc; | |
433 | } | |
434 | ||
435 | static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file) | |
436 | { | |
437 | struct usb_serial *serial = port->serial; | |
438 | int rc; | |
439 | unsigned char status; | |
440 | int value; | |
441 | ||
442 | rc = keyspan_pda_get_modem_info(serial, &status); | |
443 | if (rc < 0) | |
444 | return rc; | |
445 | value = | |
446 | ((status & (1<<7)) ? TIOCM_DTR : 0) | | |
447 | ((status & (1<<6)) ? TIOCM_CAR : 0) | | |
448 | ((status & (1<<5)) ? TIOCM_RNG : 0) | | |
449 | ((status & (1<<4)) ? TIOCM_DSR : 0) | | |
450 | ((status & (1<<3)) ? TIOCM_CTS : 0) | | |
451 | ((status & (1<<2)) ? TIOCM_RTS : 0); | |
452 | return value; | |
453 | } | |
454 | ||
455 | static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file, | |
456 | unsigned int set, unsigned int clear) | |
457 | { | |
458 | struct usb_serial *serial = port->serial; | |
459 | int rc; | |
460 | unsigned char status; | |
461 | ||
462 | rc = keyspan_pda_get_modem_info(serial, &status); | |
463 | if (rc < 0) | |
464 | return rc; | |
465 | ||
466 | if (set & TIOCM_RTS) | |
467 | status |= (1<<2); | |
468 | if (set & TIOCM_DTR) | |
469 | status |= (1<<7); | |
470 | ||
471 | if (clear & TIOCM_RTS) | |
472 | status &= ~(1<<2); | |
473 | if (clear & TIOCM_DTR) | |
474 | status &= ~(1<<7); | |
475 | rc = keyspan_pda_set_modem_info(serial, status); | |
476 | return rc; | |
477 | } | |
478 | ||
479 | static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file, | |
480 | unsigned int cmd, unsigned long arg) | |
481 | { | |
482 | switch (cmd) { | |
483 | case TIOCMIWAIT: | |
484 | /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ | |
485 | /* TODO */ | |
486 | case TIOCGICOUNT: | |
487 | /* return count of modemline transitions */ | |
488 | return 0; /* TODO */ | |
489 | } | |
490 | ||
491 | return -ENOIOCTLCMD; | |
492 | } | |
493 | ||
494 | static int keyspan_pda_write(struct usb_serial_port *port, | |
495 | const unsigned char *buf, int count) | |
496 | { | |
497 | struct usb_serial *serial = port->serial; | |
498 | int request_unthrottle = 0; | |
499 | int rc = 0; | |
500 | struct keyspan_pda_private *priv; | |
501 | ||
502 | priv = usb_get_serial_port_data(port); | |
503 | /* guess how much room is left in the device's ring buffer, and if we | |
504 | want to send more than that, check first, updating our notion of | |
505 | what is left. If our write will result in no room left, ask the | |
506 | device to give us an interrupt when the room available rises above | |
507 | a threshold, and hold off all writers (eventually, those using | |
508 | select() or poll() too) until we receive that unthrottle interrupt. | |
509 | Block if we can't write anything at all, otherwise write as much as | |
510 | we can. */ | |
511 | dbg("keyspan_pda_write(%d)",count); | |
512 | if (count == 0) { | |
513 | dbg(" write request of 0 bytes"); | |
514 | return (0); | |
515 | } | |
516 | ||
517 | /* we might block because of: | |
518 | the TX urb is in-flight (wait until it completes) | |
519 | the device is full (wait until it says there is room) | |
520 | */ | |
e81ee637 | 521 | spin_lock_bh(&port->lock); |
507ca9bc | 522 | if (port->write_urb_busy || priv->tx_throttled) { |
e81ee637 | 523 | spin_unlock_bh(&port->lock); |
507ca9bc | 524 | return 0; |
1da177e4 | 525 | } |
507ca9bc | 526 | port->write_urb_busy = 1; |
e81ee637 | 527 | spin_unlock_bh(&port->lock); |
1da177e4 LT |
528 | |
529 | /* At this point the URB is in our control, nobody else can submit it | |
530 | again (the only sudden transition was the one from EINPROGRESS to | |
531 | finished). Also, the tx process is not throttled. So we are | |
532 | ready to write. */ | |
533 | ||
534 | count = (count > port->bulk_out_size) ? port->bulk_out_size : count; | |
535 | ||
536 | /* Check if we might overrun the Tx buffer. If so, ask the | |
537 | device how much room it really has. This is done only on | |
538 | scheduler time, since usb_control_msg() sleeps. */ | |
539 | if (count > priv->tx_room && !in_interrupt()) { | |
540 | unsigned char room; | |
541 | rc = usb_control_msg(serial->dev, | |
542 | usb_rcvctrlpipe(serial->dev, 0), | |
543 | 6, /* write_room */ | |
544 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | |
545 | | USB_DIR_IN, | |
546 | 0, /* value: 0 means "remaining room" */ | |
547 | 0, /* index */ | |
548 | &room, | |
549 | 1, | |
550 | 2000); | |
551 | if (rc < 0) { | |
552 | dbg(" roomquery failed"); | |
553 | goto exit; | |
554 | } | |
555 | if (rc == 0) { | |
556 | dbg(" roomquery returned 0 bytes"); | |
557 | rc = -EIO; /* device didn't return any data */ | |
558 | goto exit; | |
559 | } | |
560 | dbg(" roomquery says %d", room); | |
561 | priv->tx_room = room; | |
562 | } | |
563 | if (count > priv->tx_room) { | |
564 | /* we're about to completely fill the Tx buffer, so | |
565 | we'll be throttled afterwards. */ | |
566 | count = priv->tx_room; | |
567 | request_unthrottle = 1; | |
568 | } | |
569 | ||
570 | if (count) { | |
571 | /* now transfer data */ | |
572 | memcpy (port->write_urb->transfer_buffer, buf, count); | |
573 | /* send the data out the bulk port */ | |
574 | port->write_urb->transfer_buffer_length = count; | |
507ca9bc | 575 | |
1da177e4 LT |
576 | priv->tx_room -= count; |
577 | ||
578 | port->write_urb->dev = port->serial->dev; | |
579 | rc = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
580 | if (rc) { | |
581 | dbg(" usb_submit_urb(write bulk) failed"); | |
582 | goto exit; | |
583 | } | |
584 | } | |
585 | else { | |
586 | /* There wasn't any room left, so we are throttled until | |
587 | the buffer empties a bit */ | |
588 | request_unthrottle = 1; | |
589 | } | |
590 | ||
591 | if (request_unthrottle) { | |
592 | priv->tx_throttled = 1; /* block writers */ | |
593 | schedule_work(&priv->unthrottle_work); | |
594 | } | |
595 | ||
596 | rc = count; | |
597 | exit: | |
507ca9bc GKH |
598 | if (rc < 0) |
599 | port->write_urb_busy = 0; | |
1da177e4 LT |
600 | return rc; |
601 | } | |
602 | ||
603 | ||
7d12e780 | 604 | static void keyspan_pda_write_bulk_callback (struct urb *urb) |
1da177e4 LT |
605 | { |
606 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
607 | struct keyspan_pda_private *priv; | |
608 | ||
507ca9bc | 609 | port->write_urb_busy = 0; |
1da177e4 LT |
610 | priv = usb_get_serial_port_data(port); |
611 | ||
612 | /* queue up a wakeup at scheduler time */ | |
613 | schedule_work(&priv->wakeup_work); | |
614 | } | |
615 | ||
616 | ||
617 | static int keyspan_pda_write_room (struct usb_serial_port *port) | |
618 | { | |
619 | struct keyspan_pda_private *priv; | |
620 | ||
621 | priv = usb_get_serial_port_data(port); | |
622 | ||
623 | /* used by n_tty.c for processing of tabs and such. Giving it our | |
624 | conservative guess is probably good enough, but needs testing by | |
625 | running a console through the device. */ | |
626 | ||
627 | return (priv->tx_room); | |
628 | } | |
629 | ||
630 | ||
631 | static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port) | |
632 | { | |
633 | struct keyspan_pda_private *priv; | |
507ca9bc | 634 | |
1da177e4 | 635 | priv = usb_get_serial_port_data(port); |
507ca9bc | 636 | |
1da177e4 LT |
637 | /* when throttled, return at least WAKEUP_CHARS to tell select() (via |
638 | n_tty.c:normal_poll() ) that we're not writeable. */ | |
507ca9bc | 639 | if (port->write_urb_busy || priv->tx_throttled) |
1da177e4 LT |
640 | return 256; |
641 | return 0; | |
642 | } | |
643 | ||
644 | ||
645 | static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp) | |
646 | { | |
647 | struct usb_serial *serial = port->serial; | |
648 | unsigned char room; | |
649 | int rc = 0; | |
650 | struct keyspan_pda_private *priv; | |
651 | ||
652 | /* find out how much room is in the Tx ring */ | |
653 | rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
654 | 6, /* write_room */ | |
655 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | |
656 | | USB_DIR_IN, | |
657 | 0, /* value */ | |
658 | 0, /* index */ | |
659 | &room, | |
660 | 1, | |
661 | 2000); | |
662 | if (rc < 0) { | |
663 | dbg("%s - roomquery failed", __FUNCTION__); | |
664 | goto error; | |
665 | } | |
666 | if (rc == 0) { | |
667 | dbg("%s - roomquery returned 0 bytes", __FUNCTION__); | |
668 | rc = -EIO; | |
669 | goto error; | |
670 | } | |
671 | priv = usb_get_serial_port_data(port); | |
672 | priv->tx_room = room; | |
673 | priv->tx_throttled = room ? 0 : 1; | |
674 | ||
675 | /* the normal serial device seems to always turn on DTR and RTS here, | |
676 | so do the same */ | |
677 | if (port->tty->termios->c_cflag & CBAUD) | |
678 | keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) ); | |
679 | else | |
680 | keyspan_pda_set_modem_info(serial, 0); | |
681 | ||
682 | /*Start reading from the device*/ | |
683 | port->interrupt_in_urb->dev = serial->dev; | |
684 | rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | |
685 | if (rc) { | |
686 | dbg("%s - usb_submit_urb(read int) failed", __FUNCTION__); | |
687 | goto error; | |
688 | } | |
689 | ||
690 | error: | |
691 | return rc; | |
692 | } | |
693 | ||
694 | ||
695 | static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp) | |
696 | { | |
697 | struct usb_serial *serial = port->serial; | |
698 | ||
699 | if (serial->dev) { | |
700 | /* the normal serial device seems to always shut off DTR and RTS now */ | |
701 | if (port->tty->termios->c_cflag & HUPCL) | |
702 | keyspan_pda_set_modem_info(serial, 0); | |
703 | ||
704 | /* shutdown our bulk reads and writes */ | |
705 | usb_kill_urb(port->write_urb); | |
706 | usb_kill_urb(port->interrupt_in_urb); | |
707 | } | |
708 | } | |
709 | ||
710 | ||
711 | /* download the firmware to a "fake" device (pre-renumeration) */ | |
712 | static int keyspan_pda_fake_startup (struct usb_serial *serial) | |
713 | { | |
714 | int response; | |
715 | const struct ezusb_hex_record *record = NULL; | |
716 | ||
717 | /* download the firmware here ... */ | |
718 | response = ezusb_set_reset(serial, 1); | |
719 | ||
720 | #ifdef KEYSPAN | |
721 | if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID) | |
722 | record = &keyspan_pda_firmware[0]; | |
723 | #endif | |
724 | #ifdef XIRCOM | |
725 | if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) || | |
726 | (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGRA_VENDOR_ID)) | |
727 | record = &xircom_pgs_firmware[0]; | |
728 | #endif | |
729 | if (record == NULL) { | |
730 | err("%s: unknown vendor, aborting.", __FUNCTION__); | |
731 | return -ENODEV; | |
732 | } | |
733 | ||
734 | while(record->address != 0xffff) { | |
735 | response = ezusb_writememory(serial, record->address, | |
736 | (unsigned char *)record->data, | |
737 | record->data_size, 0xa0); | |
738 | if (response < 0) { | |
739 | err("ezusb_writememory failed for Keyspan PDA " | |
740 | "firmware (%d %04X %p %d)", | |
741 | response, | |
742 | record->address, record->data, record->data_size); | |
743 | break; | |
744 | } | |
745 | record++; | |
746 | } | |
747 | /* bring device out of reset. Renumeration will occur in a moment | |
748 | and the new device will bind to the real driver */ | |
749 | response = ezusb_set_reset(serial, 0); | |
750 | ||
751 | /* we want this device to fail to have a driver assigned to it. */ | |
752 | return (1); | |
753 | } | |
754 | ||
755 | static int keyspan_pda_startup (struct usb_serial *serial) | |
756 | { | |
757 | ||
758 | struct keyspan_pda_private *priv; | |
759 | ||
760 | /* allocate the private data structures for all ports. Well, for all | |
761 | one ports. */ | |
762 | ||
763 | priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL); | |
764 | if (!priv) | |
765 | return (1); /* error */ | |
766 | usb_set_serial_port_data(serial->port[0], priv); | |
767 | init_waitqueue_head(&serial->port[0]->write_wait); | |
768 | INIT_WORK(&priv->wakeup_work, (void *)keyspan_pda_wakeup_write, | |
769 | (void *)(serial->port[0])); | |
770 | INIT_WORK(&priv->unthrottle_work, | |
771 | (void *)keyspan_pda_request_unthrottle, | |
772 | (void *)(serial)); | |
773 | return (0); | |
774 | } | |
775 | ||
776 | static void keyspan_pda_shutdown (struct usb_serial *serial) | |
777 | { | |
778 | dbg("%s", __FUNCTION__); | |
779 | ||
780 | kfree(usb_get_serial_port_data(serial->port[0])); | |
781 | } | |
782 | ||
783 | #ifdef KEYSPAN | |
ea65370d | 784 | static struct usb_serial_driver keyspan_pda_fake_device = { |
18fcac35 GKH |
785 | .driver = { |
786 | .owner = THIS_MODULE, | |
269bda1c | 787 | .name = "keyspan_pda_pre", |
18fcac35 | 788 | }, |
269bda1c | 789 | .description = "Keyspan PDA - (prerenumeration)", |
1da177e4 LT |
790 | .id_table = id_table_fake, |
791 | .num_interrupt_in = NUM_DONT_CARE, | |
792 | .num_bulk_in = NUM_DONT_CARE, | |
793 | .num_bulk_out = NUM_DONT_CARE, | |
794 | .num_ports = 1, | |
795 | .attach = keyspan_pda_fake_startup, | |
796 | }; | |
797 | #endif | |
798 | ||
799 | #ifdef XIRCOM | |
ea65370d | 800 | static struct usb_serial_driver xircom_pgs_fake_device = { |
18fcac35 GKH |
801 | .driver = { |
802 | .owner = THIS_MODULE, | |
269bda1c | 803 | .name = "xircom_no_firm", |
18fcac35 | 804 | }, |
269bda1c | 805 | .description = "Xircom / Entregra PGS - (prerenumeration)", |
1da177e4 LT |
806 | .id_table = id_table_fake_xircom, |
807 | .num_interrupt_in = NUM_DONT_CARE, | |
808 | .num_bulk_in = NUM_DONT_CARE, | |
809 | .num_bulk_out = NUM_DONT_CARE, | |
810 | .num_ports = 1, | |
811 | .attach = keyspan_pda_fake_startup, | |
812 | }; | |
813 | #endif | |
814 | ||
ea65370d | 815 | static struct usb_serial_driver keyspan_pda_device = { |
18fcac35 GKH |
816 | .driver = { |
817 | .owner = THIS_MODULE, | |
269bda1c | 818 | .name = "keyspan_pda", |
18fcac35 | 819 | }, |
269bda1c | 820 | .description = "Keyspan PDA", |
1da177e4 LT |
821 | .id_table = id_table_std, |
822 | .num_interrupt_in = 1, | |
823 | .num_bulk_in = 0, | |
824 | .num_bulk_out = 1, | |
825 | .num_ports = 1, | |
826 | .open = keyspan_pda_open, | |
827 | .close = keyspan_pda_close, | |
828 | .write = keyspan_pda_write, | |
829 | .write_room = keyspan_pda_write_room, | |
830 | .write_bulk_callback = keyspan_pda_write_bulk_callback, | |
831 | .read_int_callback = keyspan_pda_rx_interrupt, | |
832 | .chars_in_buffer = keyspan_pda_chars_in_buffer, | |
833 | .throttle = keyspan_pda_rx_throttle, | |
834 | .unthrottle = keyspan_pda_rx_unthrottle, | |
835 | .ioctl = keyspan_pda_ioctl, | |
836 | .set_termios = keyspan_pda_set_termios, | |
837 | .break_ctl = keyspan_pda_break_ctl, | |
838 | .tiocmget = keyspan_pda_tiocmget, | |
839 | .tiocmset = keyspan_pda_tiocmset, | |
840 | .attach = keyspan_pda_startup, | |
841 | .shutdown = keyspan_pda_shutdown, | |
842 | }; | |
843 | ||
844 | ||
845 | static int __init keyspan_pda_init (void) | |
846 | { | |
847 | int retval; | |
848 | retval = usb_serial_register(&keyspan_pda_device); | |
849 | if (retval) | |
850 | goto failed_pda_register; | |
851 | #ifdef KEYSPAN | |
852 | retval = usb_serial_register(&keyspan_pda_fake_device); | |
853 | if (retval) | |
854 | goto failed_pda_fake_register; | |
855 | #endif | |
856 | #ifdef XIRCOM | |
857 | retval = usb_serial_register(&xircom_pgs_fake_device); | |
858 | if (retval) | |
859 | goto failed_xircom_register; | |
860 | #endif | |
861 | retval = usb_register(&keyspan_pda_driver); | |
862 | if (retval) | |
863 | goto failed_usb_register; | |
864 | info(DRIVER_DESC " " DRIVER_VERSION); | |
865 | return 0; | |
866 | failed_usb_register: | |
867 | #ifdef XIRCOM | |
868 | usb_serial_deregister(&xircom_pgs_fake_device); | |
869 | failed_xircom_register: | |
870 | #endif /* XIRCOM */ | |
871 | #ifdef KEYSPAN | |
872 | usb_serial_deregister(&keyspan_pda_fake_device); | |
873 | #endif | |
874 | #ifdef KEYSPAN | |
875 | failed_pda_fake_register: | |
876 | #endif | |
877 | usb_serial_deregister(&keyspan_pda_device); | |
878 | failed_pda_register: | |
879 | return retval; | |
880 | } | |
881 | ||
882 | ||
883 | static void __exit keyspan_pda_exit (void) | |
884 | { | |
885 | usb_deregister (&keyspan_pda_driver); | |
886 | usb_serial_deregister (&keyspan_pda_device); | |
887 | #ifdef KEYSPAN | |
888 | usb_serial_deregister (&keyspan_pda_fake_device); | |
889 | #endif | |
890 | #ifdef XIRCOM | |
891 | usb_serial_deregister (&xircom_pgs_fake_device); | |
892 | #endif | |
893 | } | |
894 | ||
895 | ||
896 | module_init(keyspan_pda_init); | |
897 | module_exit(keyspan_pda_exit); | |
898 | ||
899 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
900 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
901 | MODULE_LICENSE("GPL"); | |
902 | ||
903 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
904 | MODULE_PARM_DESC(debug, "Debug enabled or not"); | |
905 |