Commit | Line | Data |
---|---|---|
3f542974 PS |
1 | /* |
2 | * This program is free software; you can redistribute it and/or modify | |
3 | * it under the terms of the GNU General Public License as published by | |
4 | * the Free Software Foundation; either version 2 of the License, or | |
5 | * (at your option) any later version. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
15 | * | |
16 | * Clean ups from Moschip version and a few ioctl implementations by: | |
17 | * Paul B Schroeder <pschroeder "at" uplogix "dot" com> | |
18 | * | |
19 | * Originally based on drivers/usb/serial/io_edgeport.c which is: | |
20 | * Copyright (C) 2000 Inside Out Networks, All rights reserved. | |
21 | * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> | |
22 | * | |
23 | */ | |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/errno.h> | |
27 | #include <linux/init.h> | |
28 | #include <linux/slab.h> | |
29 | #include <linux/tty.h> | |
30 | #include <linux/tty_driver.h> | |
31 | #include <linux/tty_flip.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/serial.h> | |
34 | #include <linux/usb.h> | |
35 | #include <linux/usb/serial.h> | |
36 | #include <asm/uaccess.h> | |
37 | ||
38 | /* | |
39 | * Version Information | |
40 | */ | |
41 | #define DRIVER_VERSION "1.3.1" | |
42 | #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" | |
43 | ||
44 | /* | |
45 | * 16C50 UART register defines | |
46 | */ | |
47 | ||
48 | #define LCR_BITS_5 0x00 /* 5 bits/char */ | |
49 | #define LCR_BITS_6 0x01 /* 6 bits/char */ | |
50 | #define LCR_BITS_7 0x02 /* 7 bits/char */ | |
51 | #define LCR_BITS_8 0x03 /* 8 bits/char */ | |
52 | #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ | |
53 | ||
54 | #define LCR_STOP_1 0x00 /* 1 stop bit */ | |
55 | #define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ | |
56 | #define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ | |
57 | #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ | |
58 | ||
59 | #define LCR_PAR_NONE 0x00 /* No parity */ | |
60 | #define LCR_PAR_ODD 0x08 /* Odd parity */ | |
61 | #define LCR_PAR_EVEN 0x18 /* Even parity */ | |
62 | #define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ | |
63 | #define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ | |
64 | #define LCR_PAR_MASK 0x38 /* Mask for parity field */ | |
65 | ||
66 | #define LCR_SET_BREAK 0x40 /* Set Break condition */ | |
67 | #define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ | |
68 | ||
69 | #define MCR_DTR 0x01 /* Assert DTR */ | |
70 | #define MCR_RTS 0x02 /* Assert RTS */ | |
71 | #define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ | |
72 | #define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ | |
73 | #define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ | |
74 | #define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ | |
75 | ||
76 | #define MOS7840_MSR_CTS 0x10 /* Current state of CTS */ | |
77 | #define MOS7840_MSR_DSR 0x20 /* Current state of DSR */ | |
78 | #define MOS7840_MSR_RI 0x40 /* Current state of RI */ | |
79 | #define MOS7840_MSR_CD 0x80 /* Current state of CD */ | |
80 | ||
81 | /* | |
82 | * Defines used for sending commands to port | |
83 | */ | |
84 | ||
85 | #define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */ | |
86 | #define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ | |
87 | ||
88 | #define MOS_PORT1 0x0200 | |
89 | #define MOS_PORT2 0x0300 | |
90 | #define MOS_VENREG 0x0000 | |
91 | #define MOS_MAX_PORT 0x02 | |
92 | #define MOS_WRITE 0x0E | |
93 | #define MOS_READ 0x0D | |
94 | ||
95 | /* Requests */ | |
96 | #define MCS_RD_RTYPE 0xC0 | |
97 | #define MCS_WR_RTYPE 0x40 | |
98 | #define MCS_RDREQ 0x0D | |
99 | #define MCS_WRREQ 0x0E | |
100 | #define MCS_CTRL_TIMEOUT 500 | |
101 | #define VENDOR_READ_LENGTH (0x01) | |
102 | ||
103 | #define MAX_NAME_LEN 64 | |
104 | ||
105 | #define ZLP_REG1 0x3A //Zero_Flag_Reg1 58 | |
106 | #define ZLP_REG5 0x3E //Zero_Flag_Reg5 62 | |
107 | ||
108 | /* For higher baud Rates use TIOCEXBAUD */ | |
109 | #define TIOCEXBAUD 0x5462 | |
110 | ||
111 | /* vendor id and device id defines */ | |
112 | ||
113 | #define USB_VENDOR_ID_MOSCHIP 0x9710 | |
114 | #define MOSCHIP_DEVICE_ID_7840 0x7840 | |
115 | #define MOSCHIP_DEVICE_ID_7820 0x7820 | |
116 | ||
117 | /* Interrupt Rotinue Defines */ | |
118 | ||
119 | #define SERIAL_IIR_RLS 0x06 | |
120 | #define SERIAL_IIR_MS 0x00 | |
121 | ||
122 | /* | |
123 | * Emulation of the bit mask on the LINE STATUS REGISTER. | |
124 | */ | |
125 | #define SERIAL_LSR_DR 0x0001 | |
126 | #define SERIAL_LSR_OE 0x0002 | |
127 | #define SERIAL_LSR_PE 0x0004 | |
128 | #define SERIAL_LSR_FE 0x0008 | |
129 | #define SERIAL_LSR_BI 0x0010 | |
130 | ||
131 | #define MOS_MSR_DELTA_CTS 0x10 | |
132 | #define MOS_MSR_DELTA_DSR 0x20 | |
133 | #define MOS_MSR_DELTA_RI 0x40 | |
134 | #define MOS_MSR_DELTA_CD 0x80 | |
135 | ||
136 | // Serial Port register Address | |
137 | #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) | |
138 | #define FIFO_CONTROL_REGISTER ((__u16)(0x02)) | |
139 | #define LINE_CONTROL_REGISTER ((__u16)(0x03)) | |
140 | #define MODEM_CONTROL_REGISTER ((__u16)(0x04)) | |
141 | #define LINE_STATUS_REGISTER ((__u16)(0x05)) | |
142 | #define MODEM_STATUS_REGISTER ((__u16)(0x06)) | |
143 | #define SCRATCH_PAD_REGISTER ((__u16)(0x07)) | |
144 | #define DIVISOR_LATCH_LSB ((__u16)(0x00)) | |
145 | #define DIVISOR_LATCH_MSB ((__u16)(0x01)) | |
146 | ||
147 | #define CLK_MULTI_REGISTER ((__u16)(0x02)) | |
148 | #define CLK_START_VALUE_REGISTER ((__u16)(0x03)) | |
149 | ||
150 | #define SERIAL_LCR_DLAB ((__u16)(0x0080)) | |
151 | ||
152 | /* | |
153 | * URB POOL related defines | |
154 | */ | |
155 | #define NUM_URBS 16 /* URB Count */ | |
156 | #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ | |
157 | ||
158 | ||
159 | static struct usb_device_id moschip_port_id_table[] = { | |
160 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, | |
161 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, | |
162 | {} /* terminating entry */ | |
163 | }; | |
164 | ||
165 | static __devinitdata struct usb_device_id moschip_id_table_combined[] = { | |
166 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, | |
167 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, | |
168 | {} /* terminating entry */ | |
169 | }; | |
170 | ||
171 | MODULE_DEVICE_TABLE(usb, moschip_id_table_combined); | |
172 | ||
173 | /* This structure holds all of the local port information */ | |
174 | ||
175 | struct moschip_port { | |
176 | int port_num; /*Actual port number in the device(1,2,etc) */ | |
177 | struct urb *write_urb; /* write URB for this port */ | |
178 | struct urb *read_urb; /* read URB for this port */ | |
0de9a702 | 179 | struct urb *int_urb; |
3f542974 PS |
180 | __u8 shadowLCR; /* last LCR value received */ |
181 | __u8 shadowMCR; /* last MCR value received */ | |
182 | char open; | |
0de9a702 ON |
183 | char open_ports; |
184 | char zombie; | |
3f542974 PS |
185 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ |
186 | wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ | |
187 | int delta_msr_cond; | |
188 | struct async_icount icount; | |
189 | struct usb_serial_port *port; /* loop back to the owner of this object */ | |
190 | ||
191 | /*Offsets */ | |
192 | __u8 SpRegOffset; | |
193 | __u8 ControlRegOffset; | |
194 | __u8 DcrRegOffset; | |
195 | //for processing control URBS in interrupt context | |
196 | struct urb *control_urb; | |
0de9a702 | 197 | struct usb_ctrlrequest *dr; |
3f542974 PS |
198 | char *ctrl_buf; |
199 | int MsrLsr; | |
200 | ||
0de9a702 | 201 | spinlock_t pool_lock; |
3f542974 | 202 | struct urb *write_urb_pool[NUM_URBS]; |
0de9a702 | 203 | char busy[NUM_URBS]; |
3f542974 PS |
204 | }; |
205 | ||
206 | ||
207 | static int debug; | |
3f542974 PS |
208 | |
209 | /* | |
210 | * mos7840_set_reg_sync | |
211 | * To set the Control register by calling usb_fill_control_urb function | |
212 | * by passing usb_sndctrlpipe function as parameter. | |
213 | */ | |
214 | ||
215 | static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, | |
216 | __u16 val) | |
217 | { | |
218 | struct usb_device *dev = port->serial->dev; | |
219 | val = val & 0x00ff; | |
220 | dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val); | |
221 | ||
222 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, | |
223 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
224 | MOS_WDR_TIMEOUT); | |
225 | } | |
226 | ||
227 | /* | |
228 | * mos7840_get_reg_sync | |
229 | * To set the Uart register by calling usb_fill_control_urb function by | |
230 | * passing usb_rcvctrlpipe function as parameter. | |
231 | */ | |
232 | ||
233 | static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, | |
234 | __u16 * val) | |
235 | { | |
236 | struct usb_device *dev = port->serial->dev; | |
237 | int ret = 0; | |
238 | ||
239 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, | |
240 | MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, | |
241 | MOS_WDR_TIMEOUT); | |
242 | dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val); | |
243 | *val = (*val) & 0x00ff; | |
244 | return ret; | |
245 | } | |
246 | ||
247 | /* | |
248 | * mos7840_set_uart_reg | |
249 | * To set the Uart register by calling usb_fill_control_urb function by | |
250 | * passing usb_sndctrlpipe function as parameter. | |
251 | */ | |
252 | ||
253 | static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, | |
254 | __u16 val) | |
255 | { | |
256 | ||
257 | struct usb_device *dev = port->serial->dev; | |
258 | val = val & 0x00ff; | |
259 | // For the UART control registers, the application number need to be Or'ed | |
0de9a702 | 260 | if (port->serial->num_ports == 4) { |
3f542974 PS |
261 | val |= |
262 | (((__u16) port->number - (__u16) (port->serial->minor)) + | |
263 | 1) << 8; | |
264 | dbg("mos7840_set_uart_reg application number is %x\n", val); | |
265 | } else { | |
266 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
267 | val |= | |
268 | (((__u16) port->number - | |
269 | (__u16) (port->serial->minor)) + 1) << 8; | |
270 | dbg("mos7840_set_uart_reg application number is %x\n", | |
271 | val); | |
272 | } else { | |
273 | val |= | |
274 | (((__u16) port->number - | |
275 | (__u16) (port->serial->minor)) + 2) << 8; | |
276 | dbg("mos7840_set_uart_reg application number is %x\n", | |
277 | val); | |
278 | } | |
279 | } | |
280 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, | |
281 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
282 | MOS_WDR_TIMEOUT); | |
283 | ||
284 | } | |
285 | ||
286 | /* | |
287 | * mos7840_get_uart_reg | |
288 | * To set the Control register by calling usb_fill_control_urb function | |
289 | * by passing usb_rcvctrlpipe function as parameter. | |
290 | */ | |
291 | static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, | |
292 | __u16 * val) | |
293 | { | |
294 | struct usb_device *dev = port->serial->dev; | |
295 | int ret = 0; | |
296 | __u16 Wval; | |
297 | ||
298 | //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); | |
299 | /*Wval is same as application number */ | |
0de9a702 | 300 | if (port->serial->num_ports == 4) { |
3f542974 PS |
301 | Wval = |
302 | (((__u16) port->number - (__u16) (port->serial->minor)) + | |
303 | 1) << 8; | |
304 | dbg("mos7840_get_uart_reg application number is %x\n", Wval); | |
305 | } else { | |
306 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
307 | Wval = | |
308 | (((__u16) port->number - | |
309 | (__u16) (port->serial->minor)) + 1) << 8; | |
310 | dbg("mos7840_get_uart_reg application number is %x\n", | |
311 | Wval); | |
312 | } else { | |
313 | Wval = | |
314 | (((__u16) port->number - | |
315 | (__u16) (port->serial->minor)) + 2) << 8; | |
316 | dbg("mos7840_get_uart_reg application number is %x\n", | |
317 | Wval); | |
318 | } | |
319 | } | |
320 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, | |
321 | MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH, | |
322 | MOS_WDR_TIMEOUT); | |
323 | *val = (*val) & 0x00ff; | |
324 | return ret; | |
325 | } | |
326 | ||
327 | static void mos7840_dump_serial_port(struct moschip_port *mos7840_port) | |
328 | { | |
329 | ||
330 | dbg("***************************************\n"); | |
331 | dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset); | |
332 | dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset); | |
333 | dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset); | |
334 | dbg("***************************************\n"); | |
335 | ||
336 | } | |
337 | ||
338 | /************************************************************************/ | |
339 | /************************************************************************/ | |
340 | /* I N T E R F A C E F U N C T I O N S */ | |
341 | /* I N T E R F A C E F U N C T I O N S */ | |
342 | /************************************************************************/ | |
343 | /************************************************************************/ | |
344 | ||
345 | static inline void mos7840_set_port_private(struct usb_serial_port *port, | |
346 | struct moschip_port *data) | |
347 | { | |
348 | usb_set_serial_port_data(port, (void *)data); | |
349 | } | |
350 | ||
351 | static inline struct moschip_port *mos7840_get_port_private(struct | |
352 | usb_serial_port | |
353 | *port) | |
354 | { | |
355 | return (struct moschip_port *)usb_get_serial_port_data(port); | |
356 | } | |
357 | ||
0de9a702 | 358 | static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) |
3f542974 PS |
359 | { |
360 | struct moschip_port *mos7840_port; | |
361 | struct async_icount *icount; | |
362 | mos7840_port = port; | |
363 | icount = &mos7840_port->icount; | |
364 | if (new_msr & | |
365 | (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | | |
366 | MOS_MSR_DELTA_CD)) { | |
367 | icount = &mos7840_port->icount; | |
368 | ||
369 | /* update input line counters */ | |
370 | if (new_msr & MOS_MSR_DELTA_CTS) { | |
371 | icount->cts++; | |
0de9a702 | 372 | smp_wmb(); |
3f542974 PS |
373 | } |
374 | if (new_msr & MOS_MSR_DELTA_DSR) { | |
375 | icount->dsr++; | |
0de9a702 | 376 | smp_wmb(); |
3f542974 PS |
377 | } |
378 | if (new_msr & MOS_MSR_DELTA_CD) { | |
379 | icount->dcd++; | |
0de9a702 | 380 | smp_wmb(); |
3f542974 PS |
381 | } |
382 | if (new_msr & MOS_MSR_DELTA_RI) { | |
383 | icount->rng++; | |
0de9a702 | 384 | smp_wmb(); |
3f542974 PS |
385 | } |
386 | } | |
3f542974 PS |
387 | } |
388 | ||
0de9a702 | 389 | static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) |
3f542974 PS |
390 | { |
391 | struct async_icount *icount; | |
392 | ||
393 | dbg("%s - %02x", __FUNCTION__, new_lsr); | |
394 | ||
395 | if (new_lsr & SERIAL_LSR_BI) { | |
396 | // | |
397 | // Parity and Framing errors only count if they | |
398 | // occur exclusive of a break being | |
399 | // received. | |
400 | // | |
401 | new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); | |
402 | } | |
403 | ||
404 | /* update input line counters */ | |
405 | icount = &port->icount; | |
406 | if (new_lsr & SERIAL_LSR_BI) { | |
407 | icount->brk++; | |
0de9a702 | 408 | smp_wmb(); |
3f542974 PS |
409 | } |
410 | if (new_lsr & SERIAL_LSR_OE) { | |
411 | icount->overrun++; | |
0de9a702 | 412 | smp_wmb(); |
3f542974 PS |
413 | } |
414 | if (new_lsr & SERIAL_LSR_PE) { | |
415 | icount->parity++; | |
0de9a702 | 416 | smp_wmb(); |
3f542974 PS |
417 | } |
418 | if (new_lsr & SERIAL_LSR_FE) { | |
419 | icount->frame++; | |
0de9a702 | 420 | smp_wmb(); |
3f542974 | 421 | } |
3f542974 PS |
422 | } |
423 | ||
424 | /************************************************************************/ | |
425 | /************************************************************************/ | |
426 | /* U S B C A L L B A C K F U N C T I O N S */ | |
427 | /* U S B C A L L B A C K F U N C T I O N S */ | |
428 | /************************************************************************/ | |
429 | /************************************************************************/ | |
430 | ||
7d12e780 | 431 | static void mos7840_control_callback(struct urb *urb) |
3f542974 PS |
432 | { |
433 | unsigned char *data; | |
434 | struct moschip_port *mos7840_port; | |
435 | __u8 regval = 0x0; | |
0de9a702 | 436 | int result = 0; |
3f542974 PS |
437 | |
438 | if (!urb) { | |
439 | dbg("%s", "Invalid Pointer !!!!:\n"); | |
440 | return; | |
441 | } | |
442 | ||
0de9a702 ON |
443 | mos7840_port = (struct moschip_port *)urb->context; |
444 | ||
3f542974 PS |
445 | switch (urb->status) { |
446 | case 0: | |
447 | /* success */ | |
448 | break; | |
449 | case -ECONNRESET: | |
450 | case -ENOENT: | |
451 | case -ESHUTDOWN: | |
452 | /* this urb is terminated, clean up */ | |
453 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, | |
454 | urb->status); | |
455 | return; | |
456 | default: | |
457 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, | |
458 | urb->status); | |
459 | goto exit; | |
460 | } | |
461 | ||
3f542974 PS |
462 | dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length); |
463 | dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__, | |
464 | mos7840_port->MsrLsr, mos7840_port->port_num); | |
465 | data = urb->transfer_buffer; | |
466 | regval = (__u8) data[0]; | |
467 | dbg("%s data is %x\n", __FUNCTION__, regval); | |
468 | if (mos7840_port->MsrLsr == 0) | |
469 | mos7840_handle_new_msr(mos7840_port, regval); | |
470 | else if (mos7840_port->MsrLsr == 1) | |
471 | mos7840_handle_new_lsr(mos7840_port, regval); | |
472 | ||
0de9a702 ON |
473 | exit: |
474 | spin_lock(&mos7840_port->pool_lock); | |
475 | if (!mos7840_port->zombie) | |
476 | result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); | |
477 | spin_unlock(&mos7840_port->pool_lock); | |
478 | if (result) { | |
479 | dev_err(&urb->dev->dev, | |
480 | "%s - Error %d submitting interrupt urb\n", | |
481 | __FUNCTION__, result); | |
482 | } | |
3f542974 PS |
483 | } |
484 | ||
485 | static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, | |
486 | __u16 * val) | |
487 | { | |
488 | struct usb_device *dev = mcs->port->serial->dev; | |
0de9a702 ON |
489 | struct usb_ctrlrequest *dr = mcs->dr; |
490 | unsigned char *buffer = mcs->ctrl_buf; | |
491 | int ret; | |
3f542974 | 492 | |
3f542974 PS |
493 | dr->bRequestType = MCS_RD_RTYPE; |
494 | dr->bRequest = MCS_RDREQ; | |
495 | dr->wValue = cpu_to_le16(Wval); //0; | |
496 | dr->wIndex = cpu_to_le16(reg); | |
497 | dr->wLength = cpu_to_le16(2); | |
498 | ||
499 | usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0), | |
500 | (unsigned char *)dr, buffer, 2, | |
501 | mos7840_control_callback, mcs); | |
502 | mcs->control_urb->transfer_buffer_length = 2; | |
503 | ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); | |
504 | return ret; | |
505 | } | |
506 | ||
507 | /***************************************************************************** | |
508 | * mos7840_interrupt_callback | |
509 | * this is the callback function for when we have received data on the | |
510 | * interrupt endpoint. | |
511 | *****************************************************************************/ | |
512 | ||
7d12e780 | 513 | static void mos7840_interrupt_callback(struct urb *urb) |
3f542974 PS |
514 | { |
515 | int result; | |
516 | int length; | |
517 | struct moschip_port *mos7840_port; | |
518 | struct usb_serial *serial; | |
519 | __u16 Data; | |
520 | unsigned char *data; | |
521 | __u8 sp[5], st; | |
0de9a702 ON |
522 | int i, rv = 0; |
523 | __u16 wval, wreg = 0; | |
3f542974 PS |
524 | |
525 | dbg("%s", " : Entering\n"); | |
526 | if (!urb) { | |
527 | dbg("%s", "Invalid Pointer !!!!:\n"); | |
528 | return; | |
529 | } | |
530 | ||
531 | switch (urb->status) { | |
532 | case 0: | |
533 | /* success */ | |
534 | break; | |
535 | case -ECONNRESET: | |
536 | case -ENOENT: | |
537 | case -ESHUTDOWN: | |
538 | /* this urb is terminated, clean up */ | |
539 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, | |
540 | urb->status); | |
541 | return; | |
542 | default: | |
543 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, | |
544 | urb->status); | |
545 | goto exit; | |
546 | } | |
547 | ||
548 | length = urb->actual_length; | |
549 | data = urb->transfer_buffer; | |
550 | ||
551 | serial = (struct usb_serial *)urb->context; | |
552 | ||
553 | /* Moschip get 5 bytes | |
554 | * Byte 1 IIR Port 1 (port.number is 0) | |
555 | * Byte 2 IIR Port 2 (port.number is 1) | |
556 | * Byte 3 IIR Port 3 (port.number is 2) | |
557 | * Byte 4 IIR Port 4 (port.number is 3) | |
558 | * Byte 5 FIFO status for both */ | |
559 | ||
560 | if (length && length > 5) { | |
561 | dbg("%s \n", "Wrong data !!!"); | |
562 | return; | |
563 | } | |
564 | ||
565 | sp[0] = (__u8) data[0]; | |
566 | sp[1] = (__u8) data[1]; | |
567 | sp[2] = (__u8) data[2]; | |
568 | sp[3] = (__u8) data[3]; | |
569 | st = (__u8) data[4]; | |
570 | ||
571 | for (i = 0; i < serial->num_ports; i++) { | |
572 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
573 | wval = | |
574 | (((__u16) serial->port[i]->number - | |
575 | (__u16) (serial->minor)) + 1) << 8; | |
576 | if (mos7840_port->open) { | |
577 | if (sp[i] & 0x01) { | |
578 | dbg("SP%d No Interrupt !!!\n", i); | |
579 | } else { | |
580 | switch (sp[i] & 0x0f) { | |
581 | case SERIAL_IIR_RLS: | |
582 | dbg("Serial Port %d: Receiver status error or ", i); | |
583 | dbg("address bit detected in 9-bit mode\n"); | |
584 | mos7840_port->MsrLsr = 1; | |
0de9a702 | 585 | wreg = LINE_STATUS_REGISTER; |
3f542974 PS |
586 | break; |
587 | case SERIAL_IIR_MS: | |
588 | dbg("Serial Port %d: Modem status change\n", i); | |
589 | mos7840_port->MsrLsr = 0; | |
0de9a702 | 590 | wreg = MODEM_STATUS_REGISTER; |
3f542974 PS |
591 | break; |
592 | } | |
0de9a702 ON |
593 | spin_lock(&mos7840_port->pool_lock); |
594 | if (!mos7840_port->zombie) { | |
595 | rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); | |
596 | } else { | |
597 | spin_unlock(&mos7840_port->pool_lock); | |
598 | return; | |
599 | } | |
600 | spin_unlock(&mos7840_port->pool_lock); | |
3f542974 PS |
601 | } |
602 | } | |
603 | } | |
0de9a702 ON |
604 | if (!(rv < 0)) /* the completion handler for the control urb will resubmit */ |
605 | return; | |
606 | exit: | |
3f542974 PS |
607 | result = usb_submit_urb(urb, GFP_ATOMIC); |
608 | if (result) { | |
609 | dev_err(&urb->dev->dev, | |
610 | "%s - Error %d submitting interrupt urb\n", | |
611 | __FUNCTION__, result); | |
612 | } | |
3f542974 PS |
613 | } |
614 | ||
615 | static int mos7840_port_paranoia_check(struct usb_serial_port *port, | |
616 | const char *function) | |
617 | { | |
618 | if (!port) { | |
619 | dbg("%s - port == NULL", function); | |
620 | return -1; | |
621 | } | |
622 | if (!port->serial) { | |
623 | dbg("%s - port->serial == NULL", function); | |
624 | return -1; | |
625 | } | |
626 | ||
627 | return 0; | |
628 | } | |
629 | ||
630 | /* Inline functions to check the sanity of a pointer that is passed to us */ | |
631 | static int mos7840_serial_paranoia_check(struct usb_serial *serial, | |
632 | const char *function) | |
633 | { | |
634 | if (!serial) { | |
635 | dbg("%s - serial == NULL", function); | |
636 | return -1; | |
637 | } | |
638 | if (!serial->type) { | |
639 | dbg("%s - serial->type == NULL!", function); | |
640 | return -1; | |
641 | } | |
642 | ||
643 | return 0; | |
644 | } | |
645 | ||
646 | static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, | |
647 | const char *function) | |
648 | { | |
649 | /* if no port was specified, or it fails a paranoia check */ | |
650 | if (!port || | |
651 | mos7840_port_paranoia_check(port, function) || | |
652 | mos7840_serial_paranoia_check(port->serial, function)) { | |
0de9a702 ON |
653 | /* then say that we don't have a valid usb_serial thing, which will |
654 | * end up genrating -ENODEV return values */ | |
3f542974 PS |
655 | return NULL; |
656 | } | |
657 | ||
658 | return port->serial; | |
659 | } | |
660 | ||
661 | /***************************************************************************** | |
662 | * mos7840_bulk_in_callback | |
663 | * this is the callback function for when we have received data on the | |
664 | * bulk in endpoint. | |
665 | *****************************************************************************/ | |
666 | ||
7d12e780 | 667 | static void mos7840_bulk_in_callback(struct urb *urb) |
3f542974 PS |
668 | { |
669 | int status; | |
670 | unsigned char *data; | |
671 | struct usb_serial *serial; | |
672 | struct usb_serial_port *port; | |
673 | struct moschip_port *mos7840_port; | |
674 | struct tty_struct *tty; | |
675 | ||
676 | if (!urb) { | |
677 | dbg("%s", "Invalid Pointer !!!!:\n"); | |
678 | return; | |
679 | } | |
680 | ||
681 | if (urb->status) { | |
682 | dbg("nonzero read bulk status received: %d", urb->status); | |
683 | return; | |
684 | } | |
685 | ||
686 | mos7840_port = (struct moschip_port *)urb->context; | |
687 | if (!mos7840_port) { | |
688 | dbg("%s", "NULL mos7840_port pointer \n"); | |
689 | return; | |
690 | } | |
691 | ||
692 | port = (struct usb_serial_port *)mos7840_port->port; | |
693 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
694 | dbg("%s", "Port Paranoia failed \n"); | |
695 | return; | |
696 | } | |
697 | ||
698 | serial = mos7840_get_usb_serial(port, __FUNCTION__); | |
699 | if (!serial) { | |
700 | dbg("%s\n", "Bad serial pointer "); | |
701 | return; | |
702 | } | |
703 | ||
704 | dbg("%s\n", "Entering... \n"); | |
705 | ||
706 | data = urb->transfer_buffer; | |
707 | ||
708 | dbg("%s", "Entering ........... \n"); | |
709 | ||
710 | if (urb->actual_length) { | |
711 | tty = mos7840_port->port->tty; | |
712 | if (tty) { | |
713 | tty_buffer_request_room(tty, urb->actual_length); | |
714 | tty_insert_flip_string(tty, data, urb->actual_length); | |
715 | dbg(" %s \n", data); | |
716 | tty_flip_buffer_push(tty); | |
717 | } | |
718 | mos7840_port->icount.rx += urb->actual_length; | |
0de9a702 | 719 | smp_wmb(); |
3f542974 PS |
720 | dbg("mos7840_port->icount.rx is %d:\n", |
721 | mos7840_port->icount.rx); | |
722 | } | |
723 | ||
724 | if (!mos7840_port->read_urb) { | |
725 | dbg("%s", "URB KILLED !!!\n"); | |
726 | return; | |
727 | } | |
728 | ||
3f542974 | 729 | |
0de9a702 | 730 | mos7840_port->read_urb->dev = serial->dev; |
3f542974 | 731 | |
0de9a702 ON |
732 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
733 | ||
734 | if (status) { | |
735 | dbg(" usb_submit_urb(read bulk) failed, status = %d", | |
736 | status); | |
3f542974 PS |
737 | } |
738 | } | |
739 | ||
740 | /***************************************************************************** | |
741 | * mos7840_bulk_out_data_callback | |
742 | * this is the callback function for when we have finished sending serial data | |
743 | * on the bulk out endpoint. | |
744 | *****************************************************************************/ | |
745 | ||
7d12e780 | 746 | static void mos7840_bulk_out_data_callback(struct urb *urb) |
3f542974 PS |
747 | { |
748 | struct moschip_port *mos7840_port; | |
749 | struct tty_struct *tty; | |
0de9a702 ON |
750 | int i; |
751 | ||
3f542974 PS |
752 | if (!urb) { |
753 | dbg("%s", "Invalid Pointer !!!!:\n"); | |
754 | return; | |
755 | } | |
756 | ||
0de9a702 ON |
757 | mos7840_port = (struct moschip_port *)urb->context; |
758 | spin_lock(&mos7840_port->pool_lock); | |
759 | for (i = 0; i < NUM_URBS; i++) { | |
760 | if (urb == mos7840_port->write_urb_pool[i]) { | |
761 | mos7840_port->busy[i] = 0; | |
762 | break; | |
763 | } | |
764 | } | |
765 | spin_unlock(&mos7840_port->pool_lock); | |
766 | ||
3f542974 PS |
767 | if (urb->status) { |
768 | dbg("nonzero write bulk status received:%d\n", urb->status); | |
769 | return; | |
770 | } | |
771 | ||
3f542974 PS |
772 | if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) { |
773 | dbg("%s", "Port Paranoia failed \n"); | |
774 | return; | |
775 | } | |
776 | ||
777 | dbg("%s \n", "Entering ........."); | |
778 | ||
779 | tty = mos7840_port->port->tty; | |
780 | ||
b963a844 JS |
781 | if (tty && mos7840_port->open) |
782 | tty_wakeup(tty); | |
3f542974 PS |
783 | |
784 | } | |
785 | ||
786 | /************************************************************************/ | |
787 | /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ | |
788 | /************************************************************************/ | |
789 | #ifdef MCSSerialProbe | |
790 | static int mos7840_serial_probe(struct usb_serial *serial, | |
791 | const struct usb_device_id *id) | |
792 | { | |
793 | ||
794 | /*need to implement the mode_reg reading and updating\ | |
795 | structures usb_serial_ device_type\ | |
796 | (i.e num_ports, num_bulkin,bulkout etc) */ | |
797 | /* Also we can update the changes attach */ | |
798 | return 1; | |
799 | } | |
800 | #endif | |
801 | ||
802 | /***************************************************************************** | |
803 | * mos7840_open | |
804 | * this function is called by the tty driver when a port is opened | |
805 | * If successful, we return 0 | |
806 | * Otherwise we return a negative error number. | |
807 | *****************************************************************************/ | |
808 | ||
809 | static int mos7840_open(struct usb_serial_port *port, struct file *filp) | |
810 | { | |
811 | int response; | |
812 | int j; | |
813 | struct usb_serial *serial; | |
814 | struct urb *urb; | |
815 | __u16 Data; | |
816 | int status; | |
817 | struct moschip_port *mos7840_port; | |
0de9a702 | 818 | struct moschip_port *port0; |
3f542974 PS |
819 | |
820 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
821 | dbg("%s", "Port Paranoia failed \n"); | |
822 | return -ENODEV; | |
823 | } | |
824 | ||
3f542974 PS |
825 | serial = port->serial; |
826 | ||
827 | if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { | |
828 | dbg("%s", "Serial Paranoia failed \n"); | |
829 | return -ENODEV; | |
830 | } | |
831 | ||
832 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 833 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 834 | |
0de9a702 | 835 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 PS |
836 | return -ENODEV; |
837 | ||
838 | usb_clear_halt(serial->dev, port->write_urb->pipe); | |
839 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
0de9a702 | 840 | port0->open_ports++; |
3f542974 PS |
841 | |
842 | /* Initialising the write urb pool */ | |
843 | for (j = 0; j < NUM_URBS; ++j) { | |
0de9a702 | 844 | urb = usb_alloc_urb(0, GFP_KERNEL); |
3f542974 PS |
845 | mos7840_port->write_urb_pool[j] = urb; |
846 | ||
847 | if (urb == NULL) { | |
848 | err("No more urbs???"); | |
849 | continue; | |
850 | } | |
851 | ||
0de9a702 | 852 | urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); |
3f542974 | 853 | if (!urb->transfer_buffer) { |
0de9a702 ON |
854 | usb_free_urb(urb); |
855 | mos7840_port->write_urb_pool[j] = NULL; | |
3f542974 PS |
856 | err("%s-out of memory for urb buffers.", __FUNCTION__); |
857 | continue; | |
858 | } | |
859 | } | |
860 | ||
861 | /***************************************************************************** | |
862 | * Initialize MCS7840 -- Write Init values to corresponding Registers | |
863 | * | |
864 | * Register Index | |
865 | * 1 : IER | |
866 | * 2 : FCR | |
867 | * 3 : LCR | |
868 | * 4 : MCR | |
869 | * | |
870 | * 0x08 : SP1/2 Control Reg | |
871 | *****************************************************************************/ | |
872 | ||
873 | //NEED to check the following Block | |
874 | ||
875 | status = 0; | |
876 | Data = 0x0; | |
877 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); | |
878 | if (status < 0) { | |
879 | dbg("Reading Spreg failed\n"); | |
880 | return -1; | |
881 | } | |
882 | Data |= 0x80; | |
883 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
884 | if (status < 0) { | |
885 | dbg("writing Spreg failed\n"); | |
886 | return -1; | |
887 | } | |
888 | ||
889 | Data &= ~0x80; | |
890 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
891 | if (status < 0) { | |
892 | dbg("writing Spreg failed\n"); | |
893 | return -1; | |
894 | } | |
895 | //End of block to be checked | |
896 | ||
897 | status = 0; | |
898 | Data = 0x0; | |
899 | status = | |
900 | mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); | |
901 | if (status < 0) { | |
902 | dbg("Reading Controlreg failed\n"); | |
903 | return -1; | |
904 | } | |
905 | Data |= 0x08; //Driver done bit | |
906 | Data |= 0x20; //rx_disable | |
0de9a702 | 907 | status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); |
3f542974 PS |
908 | if (status < 0) { |
909 | dbg("writing Controlreg failed\n"); | |
910 | return -1; | |
911 | } | |
912 | //do register settings here | |
913 | // Set all regs to the device default values. | |
914 | //////////////////////////////////// | |
915 | // First Disable all interrupts. | |
916 | //////////////////////////////////// | |
917 | ||
918 | Data = 0x00; | |
3f542974 PS |
919 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); |
920 | if (status < 0) { | |
921 | dbg("disableing interrupts failed\n"); | |
922 | return -1; | |
923 | } | |
924 | // Set FIFO_CONTROL_REGISTER to the default value | |
925 | Data = 0x00; | |
3f542974 PS |
926 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
927 | if (status < 0) { | |
928 | dbg("Writing FIFO_CONTROL_REGISTER failed\n"); | |
929 | return -1; | |
930 | } | |
931 | ||
932 | Data = 0xcf; | |
3f542974 PS |
933 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
934 | if (status < 0) { | |
935 | dbg("Writing FIFO_CONTROL_REGISTER failed\n"); | |
936 | return -1; | |
937 | } | |
938 | ||
939 | Data = 0x03; | |
3f542974 PS |
940 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
941 | mos7840_port->shadowLCR = Data; | |
942 | ||
943 | Data = 0x0b; | |
3f542974 PS |
944 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); |
945 | mos7840_port->shadowMCR = Data; | |
946 | ||
947 | Data = 0x00; | |
3f542974 PS |
948 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
949 | mos7840_port->shadowLCR = Data; | |
950 | ||
951 | Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 | |
3f542974 PS |
952 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
953 | ||
954 | Data = 0x0c; | |
955 | status = 0; | |
956 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); | |
957 | ||
958 | Data = 0x0; | |
959 | status = 0; | |
960 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); | |
961 | ||
962 | Data = 0x00; | |
963 | status = 0; | |
964 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); | |
965 | ||
966 | Data = Data & ~SERIAL_LCR_DLAB; | |
967 | status = 0; | |
968 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
969 | mos7840_port->shadowLCR = Data; | |
970 | ||
971 | //clearing Bulkin and Bulkout Fifo | |
972 | Data = 0x0; | |
973 | status = 0; | |
974 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); | |
975 | ||
976 | Data = Data | 0x0c; | |
977 | status = 0; | |
978 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
979 | ||
980 | Data = Data & ~0x0c; | |
981 | status = 0; | |
982 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
983 | //Finally enable all interrupts | |
984 | Data = 0x0; | |
985 | Data = 0x0c; | |
986 | status = 0; | |
987 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
988 | ||
989 | //clearing rx_disable | |
990 | Data = 0x0; | |
991 | status = 0; | |
992 | status = | |
993 | mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); | |
994 | Data = Data & ~0x20; | |
995 | status = 0; | |
996 | status = | |
997 | mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); | |
998 | ||
999 | // rx_negate | |
1000 | Data = 0x0; | |
1001 | status = 0; | |
1002 | status = | |
1003 | mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); | |
1004 | Data = Data | 0x10; | |
1005 | status = 0; | |
1006 | status = | |
1007 | mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); | |
1008 | ||
1009 | /* force low_latency on so that our tty_push actually forces * | |
1010 | * the data through,otherwise it is scheduled, and with * | |
1011 | * high data rates (like with OHCI) data can get lost. */ | |
1012 | ||
1013 | if (port->tty) | |
1014 | port->tty->low_latency = 1; | |
1015 | /* Check to see if we've set up our endpoint info yet * | |
1016 | * (can't set it up in mos7840_startup as the structures * | |
1017 | * were not set up at that time.) */ | |
0de9a702 | 1018 | if (port0->open_ports == 1) { |
3f542974 PS |
1019 | if (serial->port[0]->interrupt_in_buffer == NULL) { |
1020 | ||
1021 | /* set up interrupt urb */ | |
1022 | ||
1023 | usb_fill_int_urb(serial->port[0]->interrupt_in_urb, | |
1024 | serial->dev, | |
1025 | usb_rcvintpipe(serial->dev, | |
1026 | serial->port[0]-> | |
1027 | interrupt_in_endpointAddress), | |
1028 | serial->port[0]->interrupt_in_buffer, | |
1029 | serial->port[0]->interrupt_in_urb-> | |
1030 | transfer_buffer_length, | |
1031 | mos7840_interrupt_callback, | |
1032 | serial, | |
1033 | serial->port[0]->interrupt_in_urb-> | |
1034 | interval); | |
1035 | ||
1036 | /* start interrupt read for mos7840 * | |
1037 | * will continue as long as mos7840 is connected */ | |
1038 | ||
1039 | response = | |
1040 | usb_submit_urb(serial->port[0]->interrupt_in_urb, | |
1041 | GFP_KERNEL); | |
1042 | if (response) { | |
1043 | err("%s - Error %d submitting interrupt urb", | |
1044 | __FUNCTION__, response); | |
1045 | } | |
1046 | ||
1047 | } | |
1048 | ||
1049 | } | |
1050 | ||
1051 | /* see if we've set up our endpoint info yet * | |
1052 | * (can't set it up in mos7840_startup as the * | |
1053 | * structures were not set up at that time.) */ | |
1054 | ||
1055 | dbg("port number is %d \n", port->number); | |
1056 | dbg("serial number is %d \n", port->serial->minor); | |
1057 | dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress); | |
1058 | dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress); | |
1059 | dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress); | |
1060 | dbg("port's number in the device is %d\n", mos7840_port->port_num); | |
1061 | mos7840_port->read_urb = port->read_urb; | |
1062 | ||
1063 | /* set up our bulk in urb */ | |
1064 | ||
1065 | usb_fill_bulk_urb(mos7840_port->read_urb, | |
1066 | serial->dev, | |
1067 | usb_rcvbulkpipe(serial->dev, | |
1068 | port->bulk_in_endpointAddress), | |
1069 | port->bulk_in_buffer, | |
1070 | mos7840_port->read_urb->transfer_buffer_length, | |
1071 | mos7840_bulk_in_callback, mos7840_port); | |
1072 | ||
1073 | dbg("mos7840_open: bulkin endpoint is %d\n", | |
1074 | port->bulk_in_endpointAddress); | |
1075 | response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); | |
1076 | if (response) { | |
1077 | err("%s - Error %d submitting control urb", __FUNCTION__, | |
1078 | response); | |
1079 | } | |
1080 | ||
1081 | /* initialize our wait queues */ | |
1082 | init_waitqueue_head(&mos7840_port->wait_chase); | |
1083 | init_waitqueue_head(&mos7840_port->delta_msr_wait); | |
1084 | ||
1085 | /* initialize our icount structure */ | |
1086 | memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); | |
1087 | ||
1088 | /* initialize our port settings */ | |
1089 | mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ | |
1090 | /* send a open port command */ | |
1091 | mos7840_port->open = 1; | |
1092 | //mos7840_change_port_settings(mos7840_port,old_termios); | |
1093 | mos7840_port->icount.tx = 0; | |
1094 | mos7840_port->icount.rx = 0; | |
1095 | ||
97c4965d | 1096 | dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", serial, mos7840_port, port); |
3f542974 PS |
1097 | |
1098 | return 0; | |
1099 | ||
1100 | } | |
1101 | ||
1102 | /***************************************************************************** | |
1103 | * mos7840_chars_in_buffer | |
1104 | * this function is called by the tty driver when it wants to know how many | |
1105 | * bytes of data we currently have outstanding in the port (data that has | |
1106 | * been written, but hasn't made it out the port yet) | |
1107 | * If successful, we return the number of bytes left to be written in the | |
1108 | * system, | |
1109 | * Otherwise we return a negative error number. | |
1110 | *****************************************************************************/ | |
1111 | ||
1112 | static int mos7840_chars_in_buffer(struct usb_serial_port *port) | |
1113 | { | |
1114 | int i; | |
1115 | int chars = 0; | |
0de9a702 | 1116 | unsigned long flags; |
3f542974 PS |
1117 | struct moschip_port *mos7840_port; |
1118 | ||
1119 | dbg("%s \n", " mos7840_chars_in_buffer:entering ..........."); | |
1120 | ||
1121 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1122 | dbg("%s", "Invalid port \n"); | |
1123 | return -1; | |
1124 | } | |
1125 | ||
1126 | mos7840_port = mos7840_get_port_private(port); | |
1127 | if (mos7840_port == NULL) { | |
1128 | dbg("%s \n", "mos7840_break:leaving ..........."); | |
1129 | return -1; | |
1130 | } | |
1131 | ||
0de9a702 | 1132 | spin_lock_irqsave(&mos7840_port->pool_lock,flags); |
3f542974 | 1133 | for (i = 0; i < NUM_URBS; ++i) { |
0de9a702 | 1134 | if (mos7840_port->busy[i]) { |
3f542974 PS |
1135 | chars += URB_TRANSFER_BUFFER_SIZE; |
1136 | } | |
1137 | } | |
0de9a702 | 1138 | spin_unlock_irqrestore(&mos7840_port->pool_lock,flags); |
3f542974 | 1139 | dbg("%s - returns %d", __FUNCTION__, chars); |
0de9a702 | 1140 | return chars; |
3f542974 PS |
1141 | |
1142 | } | |
1143 | ||
1144 | /************************************************************************ | |
1145 | * | |
1146 | * mos7840_block_until_tx_empty | |
1147 | * | |
1148 | * This function will block the close until one of the following: | |
1149 | * 1. TX count are 0 | |
1150 | * 2. The mos7840 has stopped | |
1151 | * 3. A timout of 3 seconds without activity has expired | |
1152 | * | |
1153 | ************************************************************************/ | |
1154 | static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) | |
1155 | { | |
1156 | int timeout = HZ / 10; | |
1157 | int wait = 30; | |
1158 | int count; | |
1159 | ||
1160 | while (1) { | |
1161 | ||
1162 | count = mos7840_chars_in_buffer(mos7840_port->port); | |
1163 | ||
1164 | /* Check for Buffer status */ | |
1165 | if (count <= 0) { | |
1166 | return; | |
1167 | } | |
1168 | ||
1169 | /* Block the thread for a while */ | |
1170 | interruptible_sleep_on_timeout(&mos7840_port->wait_chase, | |
1171 | timeout); | |
1172 | ||
1173 | /* No activity.. count down section */ | |
1174 | wait--; | |
1175 | if (wait == 0) { | |
1176 | dbg("%s - TIMEOUT", __FUNCTION__); | |
1177 | return; | |
1178 | } else { | |
1179 | /* Reset timout value back to seconds */ | |
1180 | wait = 30; | |
1181 | } | |
1182 | } | |
1183 | } | |
1184 | ||
1185 | /***************************************************************************** | |
1186 | * mos7840_close | |
1187 | * this function is called by the tty driver when a port is closed | |
1188 | *****************************************************************************/ | |
1189 | ||
1190 | static void mos7840_close(struct usb_serial_port *port, struct file *filp) | |
1191 | { | |
1192 | struct usb_serial *serial; | |
1193 | struct moschip_port *mos7840_port; | |
0de9a702 | 1194 | struct moschip_port *port0; |
3f542974 PS |
1195 | int j; |
1196 | __u16 Data; | |
1197 | ||
1198 | dbg("%s\n", "mos7840_close:entering..."); | |
1199 | ||
1200 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1201 | dbg("%s", "Port Paranoia failed \n"); | |
1202 | return; | |
1203 | } | |
1204 | ||
1205 | serial = mos7840_get_usb_serial(port, __FUNCTION__); | |
1206 | if (!serial) { | |
1207 | dbg("%s", "Serial Paranoia failed \n"); | |
1208 | return; | |
1209 | } | |
1210 | ||
1211 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 1212 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 1213 | |
0de9a702 | 1214 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 | 1215 | return; |
3f542974 PS |
1216 | |
1217 | for (j = 0; j < NUM_URBS; ++j) | |
1218 | usb_kill_urb(mos7840_port->write_urb_pool[j]); | |
1219 | ||
1220 | /* Freeing Write URBs */ | |
1221 | for (j = 0; j < NUM_URBS; ++j) { | |
1222 | if (mos7840_port->write_urb_pool[j]) { | |
1223 | if (mos7840_port->write_urb_pool[j]->transfer_buffer) | |
1224 | kfree(mos7840_port->write_urb_pool[j]-> | |
1225 | transfer_buffer); | |
1226 | ||
1227 | usb_free_urb(mos7840_port->write_urb_pool[j]); | |
1228 | } | |
1229 | } | |
1230 | ||
1231 | if (serial->dev) { | |
1232 | /* flush and block until tx is empty */ | |
1233 | mos7840_block_until_tx_empty(mos7840_port); | |
1234 | } | |
1235 | ||
1236 | /* While closing port, shutdown all bulk read, write * | |
1237 | * and interrupt read if they exists */ | |
1238 | if (serial->dev) { | |
1239 | ||
1240 | if (mos7840_port->write_urb) { | |
1241 | dbg("%s", "Shutdown bulk write\n"); | |
1242 | usb_kill_urb(mos7840_port->write_urb); | |
1243 | } | |
1244 | ||
1245 | if (mos7840_port->read_urb) { | |
1246 | dbg("%s", "Shutdown bulk read\n"); | |
1247 | usb_kill_urb(mos7840_port->read_urb); | |
1248 | } | |
1249 | if ((&mos7840_port->control_urb)) { | |
1250 | dbg("%s", "Shutdown control read\n"); | |
1251 | // usb_kill_urb (mos7840_port->control_urb); | |
1252 | ||
1253 | } | |
1254 | } | |
1255 | // if(mos7840_port->ctrl_buf != NULL) | |
1256 | // kfree(mos7840_port->ctrl_buf); | |
0de9a702 | 1257 | port0->open_ports--; |
3f542974 | 1258 | dbg("mos7840_num_open_ports in close%d:in port%d\n", |
0de9a702 ON |
1259 | port0->open_ports, port->number); |
1260 | if (port0->open_ports == 0) { | |
3f542974 PS |
1261 | if (serial->port[0]->interrupt_in_urb) { |
1262 | dbg("%s", "Shutdown interrupt_in_urb\n"); | |
0de9a702 | 1263 | usb_kill_urb(serial->port[0]->interrupt_in_urb); |
3f542974 PS |
1264 | } |
1265 | } | |
1266 | ||
1267 | if (mos7840_port->write_urb) { | |
1268 | /* if this urb had a transfer buffer already (old tx) free it */ | |
1269 | ||
1270 | if (mos7840_port->write_urb->transfer_buffer != NULL) { | |
1271 | kfree(mos7840_port->write_urb->transfer_buffer); | |
1272 | } | |
1273 | usb_free_urb(mos7840_port->write_urb); | |
1274 | } | |
1275 | ||
1276 | Data = 0x0; | |
1277 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1278 | ||
1279 | Data = 0x00; | |
1280 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1281 | ||
1282 | mos7840_port->open = 0; | |
1283 | ||
1284 | dbg("%s \n", "Leaving ............"); | |
1285 | } | |
1286 | ||
1287 | /************************************************************************ | |
1288 | * | |
1289 | * mos7840_block_until_chase_response | |
1290 | * | |
1291 | * This function will block the close until one of the following: | |
1292 | * 1. Response to our Chase comes from mos7840 | |
1293 | * 2. A timout of 10 seconds without activity has expired | |
1294 | * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) | |
1295 | * | |
1296 | ************************************************************************/ | |
1297 | ||
1298 | static void mos7840_block_until_chase_response(struct moschip_port | |
1299 | *mos7840_port) | |
1300 | { | |
1301 | int timeout = 1 * HZ; | |
1302 | int wait = 10; | |
1303 | int count; | |
1304 | ||
1305 | while (1) { | |
1306 | count = mos7840_chars_in_buffer(mos7840_port->port); | |
1307 | ||
1308 | /* Check for Buffer status */ | |
1309 | if (count <= 0) { | |
1310 | return; | |
1311 | } | |
1312 | ||
1313 | /* Block the thread for a while */ | |
1314 | interruptible_sleep_on_timeout(&mos7840_port->wait_chase, | |
1315 | timeout); | |
1316 | /* No activity.. count down section */ | |
1317 | wait--; | |
1318 | if (wait == 0) { | |
1319 | dbg("%s - TIMEOUT", __FUNCTION__); | |
1320 | return; | |
1321 | } else { | |
1322 | /* Reset timout value back to seconds */ | |
1323 | wait = 10; | |
1324 | } | |
1325 | } | |
1326 | ||
1327 | } | |
1328 | ||
1329 | /***************************************************************************** | |
1330 | * mos7840_break | |
1331 | * this function sends a break to the port | |
1332 | *****************************************************************************/ | |
1333 | static void mos7840_break(struct usb_serial_port *port, int break_state) | |
1334 | { | |
1335 | unsigned char data; | |
1336 | struct usb_serial *serial; | |
1337 | struct moschip_port *mos7840_port; | |
1338 | ||
1339 | dbg("%s \n", "Entering ..........."); | |
1340 | dbg("mos7840_break: Start\n"); | |
1341 | ||
1342 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1343 | dbg("%s", "Port Paranoia failed \n"); | |
1344 | return; | |
1345 | } | |
1346 | ||
1347 | serial = mos7840_get_usb_serial(port, __FUNCTION__); | |
1348 | if (!serial) { | |
1349 | dbg("%s", "Serial Paranoia failed \n"); | |
1350 | return; | |
1351 | } | |
1352 | ||
1353 | mos7840_port = mos7840_get_port_private(port); | |
1354 | ||
1355 | if (mos7840_port == NULL) { | |
1356 | return; | |
1357 | } | |
1358 | ||
1359 | if (serial->dev) { | |
1360 | ||
1361 | /* flush and block until tx is empty */ | |
1362 | mos7840_block_until_chase_response(mos7840_port); | |
1363 | } | |
1364 | ||
1365 | if (break_state == -1) { | |
1366 | data = mos7840_port->shadowLCR | LCR_SET_BREAK; | |
1367 | } else { | |
1368 | data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; | |
1369 | } | |
1370 | ||
1371 | mos7840_port->shadowLCR = data; | |
1372 | dbg("mcs7840_break mos7840_port->shadowLCR is %x\n", | |
1373 | mos7840_port->shadowLCR); | |
1374 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, | |
1375 | mos7840_port->shadowLCR); | |
1376 | ||
1377 | return; | |
1378 | } | |
1379 | ||
1380 | /***************************************************************************** | |
1381 | * mos7840_write_room | |
1382 | * this function is called by the tty driver when it wants to know how many | |
1383 | * bytes of data we can accept for a specific port. | |
1384 | * If successful, we return the amount of room that we have for this port | |
1385 | * Otherwise we return a negative error number. | |
1386 | *****************************************************************************/ | |
1387 | ||
1388 | static int mos7840_write_room(struct usb_serial_port *port) | |
1389 | { | |
1390 | int i; | |
1391 | int room = 0; | |
0de9a702 | 1392 | unsigned long flags; |
3f542974 PS |
1393 | struct moschip_port *mos7840_port; |
1394 | ||
1395 | dbg("%s \n", " mos7840_write_room:entering ..........."); | |
1396 | ||
1397 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1398 | dbg("%s", "Invalid port \n"); | |
1399 | dbg("%s \n", " mos7840_write_room:leaving ..........."); | |
1400 | return -1; | |
1401 | } | |
1402 | ||
1403 | mos7840_port = mos7840_get_port_private(port); | |
1404 | if (mos7840_port == NULL) { | |
1405 | dbg("%s \n", "mos7840_break:leaving ..........."); | |
1406 | return -1; | |
1407 | } | |
1408 | ||
0de9a702 | 1409 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1410 | for (i = 0; i < NUM_URBS; ++i) { |
0de9a702 | 1411 | if (!mos7840_port->busy[i]) { |
3f542974 PS |
1412 | room += URB_TRANSFER_BUFFER_SIZE; |
1413 | } | |
1414 | } | |
0de9a702 | 1415 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 | 1416 | |
0de9a702 | 1417 | room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; |
3f542974 | 1418 | dbg("%s - returns %d", __FUNCTION__, room); |
0de9a702 | 1419 | return room; |
3f542974 PS |
1420 | |
1421 | } | |
1422 | ||
1423 | /***************************************************************************** | |
1424 | * mos7840_write | |
1425 | * this function is called by the tty driver when data should be written to | |
1426 | * the port. | |
1427 | * If successful, we return the number of bytes written, otherwise we | |
1428 | * return a negative error number. | |
1429 | *****************************************************************************/ | |
1430 | ||
1431 | static int mos7840_write(struct usb_serial_port *port, | |
1432 | const unsigned char *data, int count) | |
1433 | { | |
1434 | int status; | |
1435 | int i; | |
1436 | int bytes_sent = 0; | |
1437 | int transfer_size; | |
0de9a702 | 1438 | unsigned long flags; |
3f542974 PS |
1439 | |
1440 | struct moschip_port *mos7840_port; | |
1441 | struct usb_serial *serial; | |
1442 | struct urb *urb; | |
1443 | //__u16 Data; | |
1444 | const unsigned char *current_position = data; | |
1445 | unsigned char *data1; | |
1446 | dbg("%s \n", "entering ..........."); | |
1447 | //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR); | |
1448 | ||
1449 | #ifdef NOTMOS7840 | |
1450 | Data = 0x00; | |
1451 | status = 0; | |
1452 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); | |
1453 | mos7840_port->shadowLCR = Data; | |
1454 | dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data); | |
1455 | dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", | |
1456 | mos7840_port->shadowLCR); | |
1457 | ||
1458 | //Data = 0x03; | |
1459 | //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); | |
1460 | //mos7840_port->shadowLCR=Data;//Need to add later | |
1461 | ||
1462 | Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 | |
1463 | status = 0; | |
1464 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1465 | ||
1466 | //Data = 0x0c; | |
1467 | //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); | |
1468 | Data = 0x00; | |
1469 | status = 0; | |
1470 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); | |
1471 | dbg("mos7840_write:DLL value is %x\n", Data); | |
1472 | ||
1473 | Data = 0x0; | |
1474 | status = 0; | |
1475 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); | |
1476 | dbg("mos7840_write:DLM value is %x\n", Data); | |
1477 | ||
1478 | Data = Data & ~SERIAL_LCR_DLAB; | |
1479 | dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", | |
1480 | mos7840_port->shadowLCR); | |
1481 | status = 0; | |
1482 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1483 | #endif | |
1484 | ||
1485 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1486 | dbg("%s", "Port Paranoia failed \n"); | |
1487 | return -1; | |
1488 | } | |
1489 | ||
1490 | serial = port->serial; | |
1491 | if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { | |
1492 | dbg("%s", "Serial Paranoia failed \n"); | |
1493 | return -1; | |
1494 | } | |
1495 | ||
1496 | mos7840_port = mos7840_get_port_private(port); | |
1497 | if (mos7840_port == NULL) { | |
1498 | dbg("%s", "mos7840_port is NULL\n"); | |
1499 | return -1; | |
1500 | } | |
1501 | ||
1502 | /* try to find a free urb in the list */ | |
1503 | urb = NULL; | |
1504 | ||
0de9a702 | 1505 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1506 | for (i = 0; i < NUM_URBS; ++i) { |
0de9a702 ON |
1507 | if (!mos7840_port->busy[i]) { |
1508 | mos7840_port->busy[i] = 1; | |
3f542974 PS |
1509 | urb = mos7840_port->write_urb_pool[i]; |
1510 | dbg("\nURB:%d", i); | |
1511 | break; | |
1512 | } | |
1513 | } | |
0de9a702 | 1514 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 PS |
1515 | |
1516 | if (urb == NULL) { | |
1517 | dbg("%s - no more free urbs", __FUNCTION__); | |
1518 | goto exit; | |
1519 | } | |
1520 | ||
1521 | if (urb->transfer_buffer == NULL) { | |
1522 | urb->transfer_buffer = | |
1523 | kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); | |
1524 | ||
1525 | if (urb->transfer_buffer == NULL) { | |
1526 | err("%s no more kernel memory...", __FUNCTION__); | |
1527 | goto exit; | |
1528 | } | |
1529 | } | |
1530 | transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); | |
1531 | ||
97c4965d | 1532 | memcpy(urb->transfer_buffer, current_position, transfer_size); |
3f542974 PS |
1533 | |
1534 | /* fill urb with data and submit */ | |
1535 | usb_fill_bulk_urb(urb, | |
1536 | serial->dev, | |
1537 | usb_sndbulkpipe(serial->dev, | |
1538 | port->bulk_out_endpointAddress), | |
1539 | urb->transfer_buffer, | |
1540 | transfer_size, | |
1541 | mos7840_bulk_out_data_callback, mos7840_port); | |
1542 | ||
1543 | data1 = urb->transfer_buffer; | |
1544 | dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress); | |
1545 | ||
1546 | /* send it down the pipe */ | |
1547 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1548 | ||
1549 | if (status) { | |
0de9a702 | 1550 | mos7840_port->busy[i] = 0; |
3f542974 PS |
1551 | err("%s - usb_submit_urb(write bulk) failed with status = %d", |
1552 | __FUNCTION__, status); | |
1553 | bytes_sent = status; | |
1554 | goto exit; | |
1555 | } | |
1556 | bytes_sent = transfer_size; | |
1557 | mos7840_port->icount.tx += transfer_size; | |
0de9a702 | 1558 | smp_wmb(); |
3f542974 PS |
1559 | dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); |
1560 | exit: | |
1561 | ||
1562 | return bytes_sent; | |
1563 | ||
1564 | } | |
1565 | ||
1566 | /***************************************************************************** | |
1567 | * mos7840_throttle | |
1568 | * this function is called by the tty driver when it wants to stop the data | |
1569 | * being read from the port. | |
1570 | *****************************************************************************/ | |
1571 | ||
1572 | static void mos7840_throttle(struct usb_serial_port *port) | |
1573 | { | |
1574 | struct moschip_port *mos7840_port; | |
1575 | struct tty_struct *tty; | |
1576 | int status; | |
1577 | ||
1578 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1579 | dbg("%s", "Invalid port \n"); | |
1580 | return; | |
1581 | } | |
1582 | ||
1583 | dbg("- port %d\n", port->number); | |
1584 | ||
1585 | mos7840_port = mos7840_get_port_private(port); | |
1586 | ||
1587 | if (mos7840_port == NULL) | |
1588 | return; | |
1589 | ||
1590 | if (!mos7840_port->open) { | |
1591 | dbg("%s\n", "port not opened"); | |
1592 | return; | |
1593 | } | |
1594 | ||
1595 | dbg("%s", "Entering .......... \n"); | |
1596 | ||
1597 | tty = port->tty; | |
1598 | if (!tty) { | |
1599 | dbg("%s - no tty available", __FUNCTION__); | |
1600 | return; | |
1601 | } | |
1602 | ||
1603 | /* if we are implementing XON/XOFF, send the stop character */ | |
1604 | if (I_IXOFF(tty)) { | |
1605 | unsigned char stop_char = STOP_CHAR(tty); | |
1606 | status = mos7840_write(port, &stop_char, 1); | |
1607 | if (status <= 0) { | |
1608 | return; | |
1609 | } | |
1610 | } | |
1611 | ||
1612 | /* if we are implementing RTS/CTS, toggle that line */ | |
1613 | if (tty->termios->c_cflag & CRTSCTS) { | |
1614 | mos7840_port->shadowMCR &= ~MCR_RTS; | |
1615 | status = 0; | |
1616 | status = | |
1617 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, | |
1618 | mos7840_port->shadowMCR); | |
1619 | ||
1620 | if (status < 0) { | |
1621 | return; | |
1622 | } | |
1623 | } | |
1624 | ||
1625 | return; | |
1626 | } | |
1627 | ||
1628 | /***************************************************************************** | |
1629 | * mos7840_unthrottle | |
1630 | * this function is called by the tty driver when it wants to resume the data | |
1631 | * being read from the port (called after SerialThrottle is called) | |
1632 | *****************************************************************************/ | |
1633 | static void mos7840_unthrottle(struct usb_serial_port *port) | |
1634 | { | |
1635 | struct tty_struct *tty; | |
1636 | int status; | |
1637 | struct moschip_port *mos7840_port = mos7840_get_port_private(port); | |
1638 | ||
1639 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1640 | dbg("%s", "Invalid port \n"); | |
1641 | return; | |
1642 | } | |
1643 | ||
1644 | if (mos7840_port == NULL) | |
1645 | return; | |
1646 | ||
1647 | if (!mos7840_port->open) { | |
1648 | dbg("%s - port not opened", __FUNCTION__); | |
1649 | return; | |
1650 | } | |
1651 | ||
1652 | dbg("%s", "Entering .......... \n"); | |
1653 | ||
1654 | tty = port->tty; | |
1655 | if (!tty) { | |
1656 | dbg("%s - no tty available", __FUNCTION__); | |
1657 | return; | |
1658 | } | |
1659 | ||
1660 | /* if we are implementing XON/XOFF, send the start character */ | |
1661 | if (I_IXOFF(tty)) { | |
1662 | unsigned char start_char = START_CHAR(tty); | |
1663 | status = mos7840_write(port, &start_char, 1); | |
1664 | if (status <= 0) { | |
1665 | return; | |
1666 | } | |
1667 | } | |
1668 | ||
1669 | /* if we are implementing RTS/CTS, toggle that line */ | |
1670 | if (tty->termios->c_cflag & CRTSCTS) { | |
1671 | mos7840_port->shadowMCR |= MCR_RTS; | |
1672 | status = 0; | |
1673 | status = | |
1674 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, | |
1675 | mos7840_port->shadowMCR); | |
1676 | if (status < 0) { | |
1677 | return; | |
1678 | } | |
1679 | } | |
1680 | ||
1681 | return; | |
1682 | } | |
1683 | ||
1684 | static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) | |
1685 | { | |
1686 | struct moschip_port *mos7840_port; | |
1687 | unsigned int result; | |
1688 | __u16 msr; | |
1689 | __u16 mcr; | |
1690 | int status = 0; | |
1691 | mos7840_port = mos7840_get_port_private(port); | |
1692 | ||
1693 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1694 | ||
1695 | if (mos7840_port == NULL) | |
1696 | return -ENODEV; | |
1697 | ||
1698 | status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); | |
1699 | status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); | |
1700 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | |
1701 | | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | |
1702 | | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) | |
1703 | | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) | |
1704 | | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) | |
1705 | | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | |
1706 | | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); | |
1707 | ||
1708 | dbg("%s - 0x%04X", __FUNCTION__, result); | |
1709 | ||
1710 | return result; | |
1711 | } | |
1712 | ||
1713 | static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file, | |
1714 | unsigned int set, unsigned int clear) | |
1715 | { | |
1716 | struct moschip_port *mos7840_port; | |
1717 | unsigned int mcr; | |
1718 | unsigned int status; | |
1719 | ||
1720 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1721 | ||
1722 | mos7840_port = mos7840_get_port_private(port); | |
1723 | ||
1724 | if (mos7840_port == NULL) | |
1725 | return -ENODEV; | |
1726 | ||
1727 | mcr = mos7840_port->shadowMCR; | |
1728 | if (clear & TIOCM_RTS) | |
1729 | mcr &= ~MCR_RTS; | |
1730 | if (clear & TIOCM_DTR) | |
1731 | mcr &= ~MCR_DTR; | |
1732 | if (clear & TIOCM_LOOP) | |
1733 | mcr &= ~MCR_LOOPBACK; | |
1734 | ||
1735 | if (set & TIOCM_RTS) | |
1736 | mcr |= MCR_RTS; | |
1737 | if (set & TIOCM_DTR) | |
1738 | mcr |= MCR_DTR; | |
1739 | if (set & TIOCM_LOOP) | |
1740 | mcr |= MCR_LOOPBACK; | |
1741 | ||
1742 | mos7840_port->shadowMCR = mcr; | |
1743 | ||
1744 | status = 0; | |
1745 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); | |
1746 | if (status < 0) { | |
1747 | dbg("setting MODEM_CONTROL_REGISTER Failed\n"); | |
1748 | return -1; | |
1749 | } | |
1750 | ||
1751 | return 0; | |
1752 | } | |
1753 | ||
1754 | /***************************************************************************** | |
1755 | * mos7840_calc_baud_rate_divisor | |
1756 | * this function calculates the proper baud rate divisor for the specified | |
1757 | * baud rate. | |
1758 | *****************************************************************************/ | |
1759 | static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, | |
1760 | __u16 * clk_sel_val) | |
1761 | { | |
1762 | ||
1763 | dbg("%s - %d", __FUNCTION__, baudRate); | |
1764 | ||
1765 | if (baudRate <= 115200) { | |
1766 | *divisor = 115200 / baudRate; | |
1767 | *clk_sel_val = 0x0; | |
1768 | } | |
1769 | if ((baudRate > 115200) && (baudRate <= 230400)) { | |
1770 | *divisor = 230400 / baudRate; | |
1771 | *clk_sel_val = 0x10; | |
1772 | } else if ((baudRate > 230400) && (baudRate <= 403200)) { | |
1773 | *divisor = 403200 / baudRate; | |
1774 | *clk_sel_val = 0x20; | |
1775 | } else if ((baudRate > 403200) && (baudRate <= 460800)) { | |
1776 | *divisor = 460800 / baudRate; | |
1777 | *clk_sel_val = 0x30; | |
1778 | } else if ((baudRate > 460800) && (baudRate <= 806400)) { | |
1779 | *divisor = 806400 / baudRate; | |
1780 | *clk_sel_val = 0x40; | |
1781 | } else if ((baudRate > 806400) && (baudRate <= 921600)) { | |
1782 | *divisor = 921600 / baudRate; | |
1783 | *clk_sel_val = 0x50; | |
1784 | } else if ((baudRate > 921600) && (baudRate <= 1572864)) { | |
1785 | *divisor = 1572864 / baudRate; | |
1786 | *clk_sel_val = 0x60; | |
1787 | } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { | |
1788 | *divisor = 3145728 / baudRate; | |
1789 | *clk_sel_val = 0x70; | |
1790 | } | |
1791 | return 0; | |
1792 | ||
1793 | #ifdef NOTMCS7840 | |
1794 | ||
1795 | for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) { | |
1796 | if (mos7840_divisor_table[i].BaudRate == baudrate) { | |
1797 | *divisor = mos7840_divisor_table[i].Divisor; | |
1798 | return 0; | |
1799 | } | |
1800 | } | |
1801 | ||
1802 | /* After trying for all the standard baud rates * | |
1803 | * Try calculating the divisor for this baud rate */ | |
1804 | ||
1805 | if (baudrate > 75 && baudrate < 230400) { | |
1806 | /* get the divisor */ | |
1807 | custom = (__u16) (230400L / baudrate); | |
1808 | ||
1809 | /* Check for round off */ | |
1810 | round1 = (__u16) (2304000L / baudrate); | |
1811 | round = (__u16) (round1 - (custom * 10)); | |
1812 | if (round > 4) { | |
1813 | custom++; | |
1814 | } | |
1815 | *divisor = custom; | |
1816 | ||
1817 | dbg(" Baud %d = %d\n", baudrate, custom); | |
1818 | return 0; | |
1819 | } | |
1820 | ||
1821 | dbg("%s\n", " Baud calculation Failed..."); | |
1822 | return -1; | |
1823 | #endif | |
1824 | } | |
1825 | ||
1826 | /***************************************************************************** | |
1827 | * mos7840_send_cmd_write_baud_rate | |
1828 | * this function sends the proper command to change the baud rate of the | |
1829 | * specified port. | |
1830 | *****************************************************************************/ | |
1831 | ||
1832 | static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, | |
1833 | int baudRate) | |
1834 | { | |
1835 | int divisor = 0; | |
1836 | int status; | |
1837 | __u16 Data; | |
1838 | unsigned char number; | |
1839 | __u16 clk_sel_val; | |
1840 | struct usb_serial_port *port; | |
1841 | ||
1842 | if (mos7840_port == NULL) | |
1843 | return -1; | |
1844 | ||
1845 | port = (struct usb_serial_port *)mos7840_port->port; | |
1846 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1847 | dbg("%s", "Invalid port \n"); | |
1848 | return -1; | |
1849 | } | |
1850 | ||
1851 | if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { | |
1852 | dbg("%s", "Invalid Serial \n"); | |
1853 | return -1; | |
1854 | } | |
1855 | ||
1856 | dbg("%s", "Entering .......... \n"); | |
1857 | ||
1858 | number = mos7840_port->port->number - mos7840_port->port->serial->minor; | |
1859 | ||
1860 | dbg("%s - port = %d, baud = %d", __FUNCTION__, | |
1861 | mos7840_port->port->number, baudRate); | |
1862 | //reset clk_uart_sel in spregOffset | |
1863 | if (baudRate > 115200) { | |
1864 | #ifdef HW_flow_control | |
1865 | //NOTE: need to see the pther register to modify | |
1866 | //setting h/w flow control bit to 1; | |
1867 | status = 0; | |
1868 | Data = 0x2b; | |
1869 | mos7840_port->shadowMCR = Data; | |
1870 | status = | |
1871 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1872 | if (status < 0) { | |
1873 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1874 | return -1; | |
1875 | } | |
1876 | #endif | |
1877 | ||
1878 | } else { | |
1879 | #ifdef HW_flow_control | |
1880 | //setting h/w flow control bit to 0; | |
1881 | status = 0; | |
1882 | Data = 0xb; | |
1883 | mos7840_port->shadowMCR = Data; | |
1884 | status = | |
1885 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1886 | if (status < 0) { | |
1887 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1888 | return -1; | |
1889 | } | |
1890 | #endif | |
1891 | ||
1892 | } | |
1893 | ||
1894 | if (1) //baudRate <= 115200) | |
1895 | { | |
1896 | clk_sel_val = 0x0; | |
1897 | Data = 0x0; | |
1898 | status = 0; | |
1899 | status = | |
1900 | mos7840_calc_baud_rate_divisor(baudRate, &divisor, | |
1901 | &clk_sel_val); | |
1902 | status = | |
1903 | mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, | |
1904 | &Data); | |
1905 | if (status < 0) { | |
1906 | dbg("reading spreg failed in set_serial_baud\n"); | |
1907 | return -1; | |
1908 | } | |
1909 | Data = (Data & 0x8f) | clk_sel_val; | |
1910 | status = 0; | |
1911 | status = | |
1912 | mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
1913 | if (status < 0) { | |
1914 | dbg("Writing spreg failed in set_serial_baud\n"); | |
1915 | return -1; | |
1916 | } | |
1917 | /* Calculate the Divisor */ | |
1918 | ||
1919 | if (status) { | |
1920 | err("%s - bad baud rate", __FUNCTION__); | |
1921 | dbg("%s\n", "bad baud rate"); | |
1922 | return status; | |
1923 | } | |
1924 | /* Enable access to divisor latch */ | |
1925 | Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; | |
1926 | mos7840_port->shadowLCR = Data; | |
1927 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1928 | ||
1929 | /* Write the divisor */ | |
1930 | Data = (unsigned char)(divisor & 0xff); | |
1931 | dbg("set_serial_baud Value to write DLL is %x\n", Data); | |
1932 | mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); | |
1933 | ||
1934 | Data = (unsigned char)((divisor & 0xff00) >> 8); | |
1935 | dbg("set_serial_baud Value to write DLM is %x\n", Data); | |
1936 | mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); | |
1937 | ||
1938 | /* Disable access to divisor latch */ | |
1939 | Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; | |
1940 | mos7840_port->shadowLCR = Data; | |
1941 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1942 | ||
1943 | } | |
1944 | ||
1945 | return status; | |
1946 | } | |
1947 | ||
1948 | /***************************************************************************** | |
1949 | * mos7840_change_port_settings | |
1950 | * This routine is called to set the UART on the device to match | |
1951 | * the specified new settings. | |
1952 | *****************************************************************************/ | |
1953 | ||
1954 | static void mos7840_change_port_settings(struct moschip_port *mos7840_port, | |
606d099c | 1955 | struct ktermios *old_termios) |
3f542974 PS |
1956 | { |
1957 | struct tty_struct *tty; | |
1958 | int baud; | |
1959 | unsigned cflag; | |
1960 | unsigned iflag; | |
1961 | __u8 lData; | |
1962 | __u8 lParity; | |
1963 | __u8 lStop; | |
1964 | int status; | |
1965 | __u16 Data; | |
1966 | struct usb_serial_port *port; | |
1967 | struct usb_serial *serial; | |
1968 | ||
1969 | if (mos7840_port == NULL) | |
1970 | return; | |
1971 | ||
1972 | port = (struct usb_serial_port *)mos7840_port->port; | |
1973 | ||
1974 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
1975 | dbg("%s", "Invalid port \n"); | |
1976 | return; | |
1977 | } | |
1978 | ||
1979 | if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) { | |
1980 | dbg("%s", "Invalid Serial \n"); | |
1981 | return; | |
1982 | } | |
1983 | ||
1984 | serial = port->serial; | |
1985 | ||
1986 | dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number); | |
1987 | ||
1988 | if (!mos7840_port->open) { | |
1989 | dbg("%s - port not opened", __FUNCTION__); | |
1990 | return; | |
1991 | } | |
1992 | ||
1993 | tty = mos7840_port->port->tty; | |
1994 | ||
1995 | if ((!tty) || (!tty->termios)) { | |
1996 | dbg("%s - no tty structures", __FUNCTION__); | |
1997 | return; | |
1998 | } | |
1999 | ||
2000 | dbg("%s", "Entering .......... \n"); | |
2001 | ||
2002 | lData = LCR_BITS_8; | |
2003 | lStop = LCR_STOP_1; | |
2004 | lParity = LCR_PAR_NONE; | |
2005 | ||
2006 | cflag = tty->termios->c_cflag; | |
2007 | iflag = tty->termios->c_iflag; | |
2008 | ||
2009 | /* Change the number of bits */ | |
2010 | if (cflag & CSIZE) { | |
2011 | switch (cflag & CSIZE) { | |
2012 | case CS5: | |
2013 | lData = LCR_BITS_5; | |
2014 | break; | |
2015 | ||
2016 | case CS6: | |
2017 | lData = LCR_BITS_6; | |
2018 | break; | |
2019 | ||
2020 | case CS7: | |
2021 | lData = LCR_BITS_7; | |
2022 | break; | |
2023 | default: | |
2024 | case CS8: | |
2025 | lData = LCR_BITS_8; | |
2026 | break; | |
2027 | } | |
2028 | } | |
2029 | /* Change the Parity bit */ | |
2030 | if (cflag & PARENB) { | |
2031 | if (cflag & PARODD) { | |
2032 | lParity = LCR_PAR_ODD; | |
2033 | dbg("%s - parity = odd", __FUNCTION__); | |
2034 | } else { | |
2035 | lParity = LCR_PAR_EVEN; | |
2036 | dbg("%s - parity = even", __FUNCTION__); | |
2037 | } | |
2038 | ||
2039 | } else { | |
2040 | dbg("%s - parity = none", __FUNCTION__); | |
2041 | } | |
2042 | ||
2043 | if (cflag & CMSPAR) { | |
2044 | lParity = lParity | 0x20; | |
2045 | } | |
2046 | ||
2047 | /* Change the Stop bit */ | |
2048 | if (cflag & CSTOPB) { | |
2049 | lStop = LCR_STOP_2; | |
2050 | dbg("%s - stop bits = 2", __FUNCTION__); | |
2051 | } else { | |
2052 | lStop = LCR_STOP_1; | |
2053 | dbg("%s - stop bits = 1", __FUNCTION__); | |
2054 | } | |
2055 | ||
2056 | /* Update the LCR with the correct value */ | |
2057 | mos7840_port->shadowLCR &= | |
2058 | ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); | |
2059 | mos7840_port->shadowLCR |= (lData | lParity | lStop); | |
2060 | ||
2061 | dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n", | |
2062 | mos7840_port->shadowLCR); | |
2063 | /* Disable Interrupts */ | |
2064 | Data = 0x00; | |
2065 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
2066 | ||
2067 | Data = 0x00; | |
2068 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
2069 | ||
2070 | Data = 0xcf; | |
2071 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
2072 | ||
2073 | /* Send the updated LCR value to the mos7840 */ | |
2074 | Data = mos7840_port->shadowLCR; | |
2075 | ||
2076 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
2077 | ||
2078 | Data = 0x00b; | |
2079 | mos7840_port->shadowMCR = Data; | |
2080 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
2081 | Data = 0x00b; | |
2082 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
2083 | ||
2084 | /* set up the MCR register and send it to the mos7840 */ | |
2085 | ||
2086 | mos7840_port->shadowMCR = MCR_MASTER_IE; | |
2087 | if (cflag & CBAUD) { | |
2088 | mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); | |
2089 | } | |
2090 | ||
2091 | if (cflag & CRTSCTS) { | |
2092 | mos7840_port->shadowMCR |= (MCR_XON_ANY); | |
2093 | ||
2094 | } else { | |
2095 | mos7840_port->shadowMCR &= ~(MCR_XON_ANY); | |
2096 | } | |
2097 | ||
2098 | Data = mos7840_port->shadowMCR; | |
2099 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
2100 | ||
2101 | /* Determine divisor based on baud rate */ | |
2102 | baud = tty_get_baud_rate(tty); | |
2103 | ||
2104 | if (!baud) { | |
2105 | /* pick a default, any default... */ | |
2106 | dbg("%s\n", "Picked default baud..."); | |
2107 | baud = 9600; | |
2108 | } | |
2109 | ||
2110 | dbg("%s - baud rate = %d", __FUNCTION__, baud); | |
2111 | status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); | |
2112 | ||
2113 | /* Enable Interrupts */ | |
2114 | Data = 0x0c; | |
2115 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
2116 | ||
2117 | if (mos7840_port->read_urb->status != -EINPROGRESS) { | |
2118 | mos7840_port->read_urb->dev = serial->dev; | |
2119 | ||
2120 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); | |
2121 | ||
2122 | if (status) { | |
2123 | dbg(" usb_submit_urb(read bulk) failed, status = %d", | |
2124 | status); | |
2125 | } | |
2126 | } | |
2127 | wake_up(&mos7840_port->delta_msr_wait); | |
2128 | mos7840_port->delta_msr_cond = 1; | |
2129 | dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n", | |
2130 | mos7840_port->shadowLCR); | |
2131 | ||
2132 | return; | |
2133 | } | |
2134 | ||
2135 | /***************************************************************************** | |
2136 | * mos7840_set_termios | |
2137 | * this function is called by the tty driver when it wants to change | |
2138 | * the termios structure | |
2139 | *****************************************************************************/ | |
2140 | ||
2141 | static void mos7840_set_termios(struct usb_serial_port *port, | |
606d099c | 2142 | struct ktermios *old_termios) |
3f542974 PS |
2143 | { |
2144 | int status; | |
2145 | unsigned int cflag; | |
2146 | struct usb_serial *serial; | |
2147 | struct moschip_port *mos7840_port; | |
2148 | struct tty_struct *tty; | |
2149 | dbg("mos7840_set_termios: START\n"); | |
2150 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
2151 | dbg("%s", "Invalid port \n"); | |
2152 | return; | |
2153 | } | |
2154 | ||
2155 | serial = port->serial; | |
2156 | ||
2157 | if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { | |
2158 | dbg("%s", "Invalid Serial \n"); | |
2159 | return; | |
2160 | } | |
2161 | ||
2162 | mos7840_port = mos7840_get_port_private(port); | |
2163 | ||
2164 | if (mos7840_port == NULL) | |
2165 | return; | |
2166 | ||
2167 | tty = port->tty; | |
2168 | ||
2169 | if (!port->tty || !port->tty->termios) { | |
2170 | dbg("%s - no tty or termios", __FUNCTION__); | |
2171 | return; | |
2172 | } | |
2173 | ||
2174 | if (!mos7840_port->open) { | |
2175 | dbg("%s - port not opened", __FUNCTION__); | |
2176 | return; | |
2177 | } | |
2178 | ||
2179 | dbg("%s\n", "setting termios - "); | |
2180 | ||
2181 | cflag = tty->termios->c_cflag; | |
2182 | ||
2183 | if (!cflag) { | |
2184 | dbg("%s %s\n", __FUNCTION__, "cflag is NULL"); | |
2185 | return; | |
2186 | } | |
2187 | ||
2188 | /* check that they really want us to change something */ | |
2189 | if (old_termios) { | |
2190 | if ((cflag == old_termios->c_cflag) && | |
2191 | (RELEVANT_IFLAG(tty->termios->c_iflag) == | |
2192 | RELEVANT_IFLAG(old_termios->c_iflag))) { | |
2193 | dbg("%s\n", "Nothing to change"); | |
2194 | return; | |
2195 | } | |
2196 | } | |
2197 | ||
2198 | dbg("%s - clfag %08x iflag %08x", __FUNCTION__, | |
2199 | tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); | |
2200 | ||
2201 | if (old_termios) { | |
2202 | dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, | |
2203 | old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); | |
2204 | } | |
2205 | ||
2206 | dbg("%s - port %d", __FUNCTION__, port->number); | |
2207 | ||
2208 | /* change the port settings to the new ones specified */ | |
2209 | ||
2210 | mos7840_change_port_settings(mos7840_port, old_termios); | |
2211 | ||
2212 | if (!mos7840_port->read_urb) { | |
2213 | dbg("%s", "URB KILLED !!!!!\n"); | |
2214 | return; | |
2215 | } | |
2216 | ||
2217 | if (mos7840_port->read_urb->status != -EINPROGRESS) { | |
2218 | mos7840_port->read_urb->dev = serial->dev; | |
2219 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); | |
2220 | if (status) { | |
2221 | dbg(" usb_submit_urb(read bulk) failed, status = %d", | |
2222 | status); | |
2223 | } | |
2224 | } | |
2225 | return; | |
2226 | } | |
2227 | ||
2228 | /***************************************************************************** | |
2229 | * mos7840_get_lsr_info - get line status register info | |
2230 | * | |
2231 | * Purpose: Let user call ioctl() to get info when the UART physically | |
2232 | * is emptied. On bus types like RS485, the transmitter must | |
2233 | * release the bus after transmitting. This must be done when | |
2234 | * the transmit shift register is empty, not be done when the | |
2235 | * transmit holding register is empty. This functionality | |
2236 | * allows an RS485 driver to be written in user space. | |
2237 | *****************************************************************************/ | |
2238 | ||
2239 | static int mos7840_get_lsr_info(struct moschip_port *mos7840_port, | |
97c4965d | 2240 | unsigned int __user *value) |
3f542974 PS |
2241 | { |
2242 | int count; | |
2243 | unsigned int result = 0; | |
2244 | ||
2245 | count = mos7840_chars_in_buffer(mos7840_port->port); | |
2246 | if (count == 0) { | |
2247 | dbg("%s -- Empty", __FUNCTION__); | |
2248 | result = TIOCSER_TEMT; | |
2249 | } | |
2250 | ||
2251 | if (copy_to_user(value, &result, sizeof(int))) | |
2252 | return -EFAULT; | |
2253 | return 0; | |
2254 | } | |
2255 | ||
2256 | /***************************************************************************** | |
2257 | * mos7840_get_bytes_avail - get number of bytes available | |
2258 | * | |
2259 | * Purpose: Let user call ioctl to get the count of number of bytes available. | |
2260 | *****************************************************************************/ | |
2261 | ||
2262 | static int mos7840_get_bytes_avail(struct moschip_port *mos7840_port, | |
97c4965d | 2263 | unsigned int __user *value) |
3f542974 PS |
2264 | { |
2265 | unsigned int result = 0; | |
2266 | struct tty_struct *tty = mos7840_port->port->tty; | |
2267 | ||
2268 | if (!tty) | |
2269 | return -ENOIOCTLCMD; | |
2270 | ||
2271 | result = tty->read_cnt; | |
2272 | ||
2273 | dbg("%s(%d) = %d", __FUNCTION__, mos7840_port->port->number, result); | |
2274 | if (copy_to_user(value, &result, sizeof(int))) | |
2275 | return -EFAULT; | |
2276 | ||
2277 | return -ENOIOCTLCMD; | |
2278 | } | |
2279 | ||
2280 | /***************************************************************************** | |
2281 | * mos7840_set_modem_info | |
2282 | * function to set modem info | |
2283 | *****************************************************************************/ | |
2284 | ||
2285 | static int mos7840_set_modem_info(struct moschip_port *mos7840_port, | |
97c4965d | 2286 | unsigned int cmd, unsigned int __user *value) |
3f542974 PS |
2287 | { |
2288 | unsigned int mcr; | |
2289 | unsigned int arg; | |
2290 | __u16 Data; | |
2291 | int status; | |
2292 | struct usb_serial_port *port; | |
2293 | ||
2294 | if (mos7840_port == NULL) | |
2295 | return -1; | |
2296 | ||
2297 | port = (struct usb_serial_port *)mos7840_port->port; | |
2298 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
2299 | dbg("%s", "Invalid port \n"); | |
2300 | return -1; | |
2301 | } | |
2302 | ||
2303 | mcr = mos7840_port->shadowMCR; | |
2304 | ||
2305 | if (copy_from_user(&arg, value, sizeof(int))) | |
2306 | return -EFAULT; | |
2307 | ||
2308 | switch (cmd) { | |
2309 | case TIOCMBIS: | |
2310 | if (arg & TIOCM_RTS) | |
2311 | mcr |= MCR_RTS; | |
2312 | if (arg & TIOCM_DTR) | |
2313 | mcr |= MCR_RTS; | |
2314 | if (arg & TIOCM_LOOP) | |
2315 | mcr |= MCR_LOOPBACK; | |
2316 | break; | |
2317 | ||
2318 | case TIOCMBIC: | |
2319 | if (arg & TIOCM_RTS) | |
2320 | mcr &= ~MCR_RTS; | |
2321 | if (arg & TIOCM_DTR) | |
2322 | mcr &= ~MCR_RTS; | |
2323 | if (arg & TIOCM_LOOP) | |
2324 | mcr &= ~MCR_LOOPBACK; | |
2325 | break; | |
2326 | ||
2327 | case TIOCMSET: | |
2328 | /* turn off the RTS and DTR and LOOPBACK | |
2329 | * and then only turn on what was asked to */ | |
2330 | mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); | |
2331 | mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); | |
2332 | mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); | |
2333 | mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); | |
2334 | break; | |
2335 | } | |
2336 | ||
2337 | mos7840_port->shadowMCR = mcr; | |
2338 | ||
2339 | Data = mos7840_port->shadowMCR; | |
2340 | status = 0; | |
2341 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
2342 | if (status < 0) { | |
2343 | dbg("setting MODEM_CONTROL_REGISTER Failed\n"); | |
2344 | return -1; | |
2345 | } | |
2346 | ||
2347 | return 0; | |
2348 | } | |
2349 | ||
2350 | /***************************************************************************** | |
2351 | * mos7840_get_modem_info | |
2352 | * function to get modem info | |
2353 | *****************************************************************************/ | |
2354 | ||
2355 | static int mos7840_get_modem_info(struct moschip_port *mos7840_port, | |
97c4965d | 2356 | unsigned int __user *value) |
3f542974 PS |
2357 | { |
2358 | unsigned int result = 0; | |
2359 | __u16 msr; | |
2360 | unsigned int mcr = mos7840_port->shadowMCR; | |
2361 | int status = 0; | |
2362 | status = | |
2363 | mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER, | |
2364 | &msr); | |
2365 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ | |
2366 | |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ | |
2367 | |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ | |
2368 | |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ | |
2369 | |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | |
2370 | |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ | |
2371 | ||
2372 | dbg("%s -- %x", __FUNCTION__, result); | |
2373 | ||
2374 | if (copy_to_user(value, &result, sizeof(int))) | |
2375 | return -EFAULT; | |
2376 | return 0; | |
2377 | } | |
2378 | ||
2379 | /***************************************************************************** | |
2380 | * mos7840_get_serial_info | |
2381 | * function to get information about serial port | |
2382 | *****************************************************************************/ | |
2383 | ||
2384 | static int mos7840_get_serial_info(struct moschip_port *mos7840_port, | |
97c4965d | 2385 | struct serial_struct __user *retinfo) |
3f542974 PS |
2386 | { |
2387 | struct serial_struct tmp; | |
2388 | ||
2389 | if (mos7840_port == NULL) | |
2390 | return -1; | |
2391 | ||
2392 | if (!retinfo) | |
2393 | return -EFAULT; | |
2394 | ||
2395 | memset(&tmp, 0, sizeof(tmp)); | |
2396 | ||
2397 | tmp.type = PORT_16550A; | |
2398 | tmp.line = mos7840_port->port->serial->minor; | |
2399 | tmp.port = mos7840_port->port->number; | |
2400 | tmp.irq = 0; | |
2401 | tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
2402 | tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; | |
2403 | tmp.baud_base = 9600; | |
2404 | tmp.close_delay = 5 * HZ; | |
2405 | tmp.closing_wait = 30 * HZ; | |
2406 | ||
2407 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
2408 | return -EFAULT; | |
2409 | return 0; | |
2410 | } | |
2411 | ||
2412 | /***************************************************************************** | |
2413 | * SerialIoctl | |
2414 | * this function handles any ioctl calls to the driver | |
2415 | *****************************************************************************/ | |
2416 | ||
2417 | static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, | |
2418 | unsigned int cmd, unsigned long arg) | |
2419 | { | |
97c4965d | 2420 | void __user *argp = (void __user *)arg; |
3f542974 PS |
2421 | struct moschip_port *mos7840_port; |
2422 | struct tty_struct *tty; | |
2423 | ||
2424 | struct async_icount cnow; | |
2425 | struct async_icount cprev; | |
2426 | struct serial_icounter_struct icount; | |
2427 | int mosret = 0; | |
2428 | int retval; | |
2429 | struct tty_ldisc *ld; | |
2430 | ||
2431 | if (mos7840_port_paranoia_check(port, __FUNCTION__)) { | |
2432 | dbg("%s", "Invalid port \n"); | |
2433 | return -1; | |
2434 | } | |
2435 | ||
2436 | mos7840_port = mos7840_get_port_private(port); | |
3f542974 PS |
2437 | |
2438 | if (mos7840_port == NULL) | |
2439 | return -1; | |
2440 | ||
ad18027f AB |
2441 | tty = mos7840_port->port->tty; |
2442 | ||
3f542974 PS |
2443 | dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd); |
2444 | ||
2445 | switch (cmd) { | |
2446 | /* return number of bytes available */ | |
2447 | ||
2448 | case TIOCINQ: | |
2449 | dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number); | |
97c4965d | 2450 | return mos7840_get_bytes_avail(mos7840_port, argp); |
3f542974 PS |
2451 | |
2452 | case TIOCOUTQ: | |
2453 | dbg("%s (%d) TIOCOUTQ", __FUNCTION__, port->number); | |
2454 | return put_user(tty->driver->chars_in_buffer ? | |
2455 | tty->driver->chars_in_buffer(tty) : 0, | |
2456 | (int __user *)arg); | |
3f542974 PS |
2457 | |
2458 | case TCFLSH: | |
2459 | retval = tty_check_change(tty); | |
2460 | if (retval) | |
2461 | return retval; | |
2462 | ||
2463 | ld = tty_ldisc_ref(tty); | |
2464 | switch (arg) { | |
2465 | case TCIFLUSH: | |
2466 | if (ld && ld->flush_buffer) | |
2467 | ld->flush_buffer(tty); | |
2468 | break; | |
2469 | case TCIOFLUSH: | |
2470 | if (ld && ld->flush_buffer) | |
2471 | ld->flush_buffer(tty); | |
2472 | /* fall through */ | |
2473 | case TCOFLUSH: | |
2474 | if (tty->driver->flush_buffer) | |
2475 | tty->driver->flush_buffer(tty); | |
2476 | break; | |
2477 | default: | |
2478 | tty_ldisc_deref(ld); | |
2479 | return -EINVAL; | |
2480 | } | |
2481 | tty_ldisc_deref(ld); | |
2482 | return 0; | |
2483 | ||
3f542974 PS |
2484 | case TIOCSERGETLSR: |
2485 | dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); | |
97c4965d | 2486 | return mos7840_get_lsr_info(mos7840_port, argp); |
3f542974 PS |
2487 | return 0; |
2488 | ||
2489 | case TIOCMBIS: | |
2490 | case TIOCMBIC: | |
2491 | case TIOCMSET: | |
2492 | dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, | |
2493 | port->number); | |
2494 | mosret = | |
97c4965d | 2495 | mos7840_set_modem_info(mos7840_port, cmd, argp); |
3f542974 PS |
2496 | return mosret; |
2497 | ||
2498 | case TIOCMGET: | |
2499 | dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number); | |
97c4965d | 2500 | return mos7840_get_modem_info(mos7840_port, argp); |
3f542974 PS |
2501 | |
2502 | case TIOCGSERIAL: | |
2503 | dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number); | |
97c4965d | 2504 | return mos7840_get_serial_info(mos7840_port, argp); |
3f542974 PS |
2505 | |
2506 | case TIOCSSERIAL: | |
2507 | dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number); | |
2508 | break; | |
2509 | ||
2510 | case TIOCMIWAIT: | |
2511 | dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); | |
2512 | cprev = mos7840_port->icount; | |
2513 | while (1) { | |
2514 | //interruptible_sleep_on(&mos7840_port->delta_msr_wait); | |
2515 | mos7840_port->delta_msr_cond = 0; | |
2516 | wait_event_interruptible(mos7840_port->delta_msr_wait, | |
2517 | (mos7840_port-> | |
2518 | delta_msr_cond == 1)); | |
2519 | ||
2520 | /* see if a signal did it */ | |
2521 | if (signal_pending(current)) | |
2522 | return -ERESTARTSYS; | |
2523 | cnow = mos7840_port->icount; | |
0de9a702 | 2524 | smp_rmb(); |
3f542974 PS |
2525 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && |
2526 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) | |
2527 | return -EIO; /* no change => error */ | |
2528 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | |
2529 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
2530 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
2531 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { | |
2532 | return 0; | |
2533 | } | |
2534 | cprev = cnow; | |
2535 | } | |
2536 | /* NOTREACHED */ | |
2537 | break; | |
2538 | ||
2539 | case TIOCGICOUNT: | |
2540 | cnow = mos7840_port->icount; | |
0de9a702 | 2541 | smp_rmb(); |
3f542974 PS |
2542 | icount.cts = cnow.cts; |
2543 | icount.dsr = cnow.dsr; | |
2544 | icount.rng = cnow.rng; | |
2545 | icount.dcd = cnow.dcd; | |
2546 | icount.rx = cnow.rx; | |
2547 | icount.tx = cnow.tx; | |
2548 | icount.frame = cnow.frame; | |
2549 | icount.overrun = cnow.overrun; | |
2550 | icount.parity = cnow.parity; | |
2551 | icount.brk = cnow.brk; | |
2552 | icount.buf_overrun = cnow.buf_overrun; | |
2553 | ||
2554 | dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, | |
2555 | port->number, icount.rx, icount.tx); | |
97c4965d | 2556 | if (copy_to_user(argp, &icount, sizeof(icount))) |
3f542974 PS |
2557 | return -EFAULT; |
2558 | return 0; | |
2559 | ||
2560 | case TIOCEXBAUD: | |
2561 | return 0; | |
2562 | default: | |
2563 | break; | |
2564 | } | |
2565 | ||
2566 | return -ENOIOCTLCMD; | |
2567 | } | |
2568 | ||
2569 | static int mos7840_calc_num_ports(struct usb_serial *serial) | |
2570 | { | |
0de9a702 | 2571 | int mos7840_num_ports = 0; |
3f542974 PS |
2572 | |
2573 | dbg("numberofendpoints: %d \n", | |
2574 | (int)serial->interface->cur_altsetting->desc.bNumEndpoints); | |
2575 | dbg("numberofendpoints: %d \n", | |
2576 | (int)serial->interface->altsetting->desc.bNumEndpoints); | |
2577 | if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) { | |
0de9a702 | 2578 | mos7840_num_ports = serial->num_ports = 2; |
3f542974 | 2579 | } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) { |
0de9a702 ON |
2580 | serial->num_bulk_in = 4; |
2581 | serial->num_bulk_out = 4; | |
2582 | mos7840_num_ports = serial->num_ports = 4; | |
3f542974 PS |
2583 | } |
2584 | ||
2585 | return mos7840_num_ports; | |
2586 | } | |
2587 | ||
2588 | /**************************************************************************** | |
2589 | * mos7840_startup | |
2590 | ****************************************************************************/ | |
2591 | ||
2592 | static int mos7840_startup(struct usb_serial *serial) | |
2593 | { | |
2594 | struct moschip_port *mos7840_port; | |
2595 | struct usb_device *dev; | |
2596 | int i, status; | |
2597 | ||
2598 | __u16 Data; | |
2599 | dbg("%s \n", " mos7840_startup :entering.........."); | |
2600 | ||
2601 | if (!serial) { | |
2602 | dbg("%s\n", "Invalid Handler"); | |
2603 | return -1; | |
2604 | } | |
2605 | ||
2606 | dev = serial->dev; | |
2607 | ||
2608 | dbg("%s\n", "Entering..."); | |
2609 | ||
2610 | /* we set up the pointers to the endpoints in the mos7840_open * | |
2611 | * function, as the structures aren't created yet. */ | |
2612 | ||
2613 | /* set up port private structures */ | |
2614 | for (i = 0; i < serial->num_ports; ++i) { | |
7ac9da10 | 2615 | mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); |
3f542974 PS |
2616 | if (mos7840_port == NULL) { |
2617 | err("%s - Out of memory", __FUNCTION__); | |
0de9a702 ON |
2618 | status = -ENOMEM; |
2619 | i--; /* don't follow NULL pointer cleaning up */ | |
2620 | goto error; | |
3f542974 | 2621 | } |
3f542974 PS |
2622 | |
2623 | /* Initialize all port interrupt end point to port 0 int endpoint * | |
2624 | * Our device has only one interrupt end point comman to all port */ | |
2625 | ||
2626 | mos7840_port->port = serial->port[i]; | |
2627 | mos7840_set_port_private(serial->port[i], mos7840_port); | |
0de9a702 | 2628 | spin_lock_init(&mos7840_port->pool_lock); |
3f542974 PS |
2629 | |
2630 | mos7840_port->port_num = ((serial->port[i]->number - | |
2631 | (serial->port[i]->serial->minor)) + | |
2632 | 1); | |
2633 | ||
2634 | if (mos7840_port->port_num == 1) { | |
2635 | mos7840_port->SpRegOffset = 0x0; | |
2636 | mos7840_port->ControlRegOffset = 0x1; | |
2637 | mos7840_port->DcrRegOffset = 0x4; | |
2638 | } else if ((mos7840_port->port_num == 2) | |
0de9a702 | 2639 | && (serial->num_ports == 4)) { |
3f542974 PS |
2640 | mos7840_port->SpRegOffset = 0x8; |
2641 | mos7840_port->ControlRegOffset = 0x9; | |
2642 | mos7840_port->DcrRegOffset = 0x16; | |
2643 | } else if ((mos7840_port->port_num == 2) | |
0de9a702 | 2644 | && (serial->num_ports == 2)) { |
3f542974 PS |
2645 | mos7840_port->SpRegOffset = 0xa; |
2646 | mos7840_port->ControlRegOffset = 0xb; | |
2647 | mos7840_port->DcrRegOffset = 0x19; | |
2648 | } else if ((mos7840_port->port_num == 3) | |
0de9a702 | 2649 | && (serial->num_ports == 4)) { |
3f542974 PS |
2650 | mos7840_port->SpRegOffset = 0xa; |
2651 | mos7840_port->ControlRegOffset = 0xb; | |
2652 | mos7840_port->DcrRegOffset = 0x19; | |
2653 | } else if ((mos7840_port->port_num == 4) | |
0de9a702 | 2654 | && (serial->num_ports == 4)) { |
3f542974 PS |
2655 | mos7840_port->SpRegOffset = 0xc; |
2656 | mos7840_port->ControlRegOffset = 0xd; | |
2657 | mos7840_port->DcrRegOffset = 0x1c; | |
2658 | } | |
2659 | mos7840_dump_serial_port(mos7840_port); | |
2660 | ||
2661 | mos7840_set_port_private(serial->port[i], mos7840_port); | |
2662 | ||
2663 | //enable rx_disable bit in control register | |
2664 | ||
2665 | status = | |
2666 | mos7840_get_reg_sync(serial->port[i], | |
2667 | mos7840_port->ControlRegOffset, &Data); | |
2668 | if (status < 0) { | |
2669 | dbg("Reading ControlReg failed status-0x%x\n", status); | |
2670 | break; | |
2671 | } else | |
2672 | dbg("ControlReg Reading success val is %x, status%d\n", | |
2673 | Data, status); | |
2674 | Data |= 0x08; //setting driver done bit | |
2675 | Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg | |
2676 | ||
2677 | //Data |= 0x20; //rx_disable bit | |
2678 | status = 0; | |
2679 | status = | |
2680 | mos7840_set_reg_sync(serial->port[i], | |
2681 | mos7840_port->ControlRegOffset, Data); | |
2682 | if (status < 0) { | |
2683 | dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status); | |
2684 | break; | |
2685 | } else | |
2686 | dbg("ControlReg Writing success(rx_disable) status%d\n", | |
2687 | status); | |
2688 | ||
2689 | //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 | |
2690 | Data = 0x01; | |
2691 | status = 0; | |
2692 | status = | |
2693 | mos7840_set_reg_sync(serial->port[i], | |
2694 | (__u16) (mos7840_port->DcrRegOffset + | |
2695 | 0), Data); | |
2696 | if (status < 0) { | |
2697 | dbg("Writing DCR0 failed status-0x%x\n", status); | |
2698 | break; | |
2699 | } else | |
2700 | dbg("DCR0 Writing success status%d\n", status); | |
2701 | ||
2702 | Data = 0x05; | |
2703 | status = 0; | |
2704 | status = | |
2705 | mos7840_set_reg_sync(serial->port[i], | |
2706 | (__u16) (mos7840_port->DcrRegOffset + | |
2707 | 1), Data); | |
2708 | if (status < 0) { | |
2709 | dbg("Writing DCR1 failed status-0x%x\n", status); | |
2710 | break; | |
2711 | } else | |
2712 | dbg("DCR1 Writing success status%d\n", status); | |
2713 | ||
2714 | Data = 0x24; | |
2715 | status = 0; | |
2716 | status = | |
2717 | mos7840_set_reg_sync(serial->port[i], | |
2718 | (__u16) (mos7840_port->DcrRegOffset + | |
2719 | 2), Data); | |
2720 | if (status < 0) { | |
2721 | dbg("Writing DCR2 failed status-0x%x\n", status); | |
2722 | break; | |
2723 | } else | |
2724 | dbg("DCR2 Writing success status%d\n", status); | |
2725 | ||
2726 | // write values in clkstart0x0 and clkmulti 0x20 | |
2727 | Data = 0x0; | |
2728 | status = 0; | |
2729 | status = | |
2730 | mos7840_set_reg_sync(serial->port[i], | |
2731 | CLK_START_VALUE_REGISTER, Data); | |
2732 | if (status < 0) { | |
2733 | dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); | |
2734 | break; | |
2735 | } else | |
2736 | dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); | |
2737 | ||
2738 | Data = 0x20; | |
3f542974 PS |
2739 | status = |
2740 | mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, | |
2741 | Data); | |
2742 | if (status < 0) { | |
2743 | dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", | |
2744 | status); | |
0de9a702 | 2745 | goto error; |
3f542974 PS |
2746 | } else |
2747 | dbg("CLK_MULTI_REGISTER Writing success status%d\n", | |
2748 | status); | |
2749 | ||
2750 | //write value 0x0 to scratchpad register | |
2751 | Data = 0x00; | |
3f542974 PS |
2752 | status = |
2753 | mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, | |
2754 | Data); | |
2755 | if (status < 0) { | |
2756 | dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", | |
2757 | status); | |
2758 | break; | |
2759 | } else | |
2760 | dbg("SCRATCH_PAD_REGISTER Writing success status%d\n", | |
2761 | status); | |
2762 | ||
2763 | //Zero Length flag register | |
2764 | if ((mos7840_port->port_num != 1) | |
0de9a702 | 2765 | && (serial->num_ports == 2)) { |
3f542974 PS |
2766 | |
2767 | Data = 0xff; | |
2768 | status = 0; | |
2769 | status = mos7840_set_reg_sync(serial->port[i], | |
2770 | (__u16) (ZLP_REG1 + | |
2771 | ((__u16) | |
2772 | mos7840_port-> | |
2773 | port_num)), | |
2774 | Data); | |
2775 | dbg("ZLIP offset%x\n", | |
2776 | (__u16) (ZLP_REG1 + | |
2777 | ((__u16) mos7840_port->port_num))); | |
2778 | if (status < 0) { | |
2779 | dbg("Writing ZLP_REG%d failed status-0x%x\n", | |
2780 | i + 2, status); | |
2781 | break; | |
2782 | } else | |
2783 | dbg("ZLP_REG%d Writing success status%d\n", | |
2784 | i + 2, status); | |
2785 | } else { | |
2786 | Data = 0xff; | |
2787 | status = 0; | |
2788 | status = mos7840_set_reg_sync(serial->port[i], | |
2789 | (__u16) (ZLP_REG1 + | |
2790 | ((__u16) | |
2791 | mos7840_port-> | |
2792 | port_num) - | |
2793 | 0x1), Data); | |
2794 | dbg("ZLIP offset%x\n", | |
2795 | (__u16) (ZLP_REG1 + | |
2796 | ((__u16) mos7840_port->port_num) - 0x1)); | |
2797 | if (status < 0) { | |
2798 | dbg("Writing ZLP_REG%d failed status-0x%x\n", | |
2799 | i + 1, status); | |
2800 | break; | |
2801 | } else | |
2802 | dbg("ZLP_REG%d Writing success status%d\n", | |
2803 | i + 1, status); | |
2804 | ||
2805 | } | |
0de9a702 | 2806 | mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); |
3f542974 | 2807 | mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); |
0de9a702 ON |
2808 | mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); |
2809 | if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) { | |
2810 | status = -ENOMEM; | |
2811 | goto error; | |
2812 | } | |
3f542974 PS |
2813 | } |
2814 | ||
2815 | //Zero Length flag enable | |
2816 | Data = 0x0f; | |
3f542974 PS |
2817 | status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); |
2818 | if (status < 0) { | |
2819 | dbg("Writing ZLP_REG5 failed status-0x%x\n", status); | |
2820 | return -1; | |
2821 | } else | |
2822 | dbg("ZLP_REG5 Writing success status%d\n", status); | |
2823 | ||
2824 | /* setting configuration feature to one */ | |
2825 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
97c4965d | 2826 | (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); |
3f542974 | 2827 | return 0; |
0de9a702 ON |
2828 | error: |
2829 | for (/* nothing */; i >= 0; i--) { | |
2830 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
2831 | ||
2832 | kfree(mos7840_port->dr); | |
2833 | kfree(mos7840_port->ctrl_buf); | |
2834 | usb_free_urb(mos7840_port->control_urb); | |
2835 | kfree(mos7840_port); | |
2836 | serial->port[i] = NULL; | |
2837 | } | |
2838 | return status; | |
3f542974 PS |
2839 | } |
2840 | ||
2841 | /**************************************************************************** | |
2842 | * mos7840_shutdown | |
2843 | * This function is called whenever the device is removed from the usb bus. | |
2844 | ****************************************************************************/ | |
2845 | ||
2846 | static void mos7840_shutdown(struct usb_serial *serial) | |
2847 | { | |
2848 | int i; | |
0de9a702 | 2849 | unsigned long flags; |
3f542974 PS |
2850 | struct moschip_port *mos7840_port; |
2851 | dbg("%s \n", " shutdown :entering.........."); | |
2852 | ||
2853 | if (!serial) { | |
2854 | dbg("%s", "Invalid Handler \n"); | |
2855 | return; | |
2856 | } | |
2857 | ||
2858 | /* check for the ports to be closed,close the ports and disconnect */ | |
2859 | ||
2860 | /* free private structure allocated for serial port * | |
2861 | * stop reads and writes on all ports */ | |
2862 | ||
2863 | for (i = 0; i < serial->num_ports; ++i) { | |
2864 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
0de9a702 ON |
2865 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
2866 | mos7840_port->zombie = 1; | |
2867 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); | |
3f542974 | 2868 | usb_kill_urb(mos7840_port->control_urb); |
0de9a702 ON |
2869 | kfree(mos7840_port->ctrl_buf); |
2870 | kfree(mos7840_port->dr); | |
3f542974 PS |
2871 | kfree(mos7840_port); |
2872 | mos7840_set_port_private(serial->port[i], NULL); | |
2873 | } | |
2874 | ||
2875 | dbg("%s\n", "Thank u :: "); | |
2876 | ||
2877 | } | |
2878 | ||
d9b1b787 JH |
2879 | static struct usb_driver io_driver = { |
2880 | .name = "mos7840", | |
2881 | .probe = usb_serial_probe, | |
2882 | .disconnect = usb_serial_disconnect, | |
2883 | .id_table = moschip_id_table_combined, | |
2884 | .no_dynamic_id = 1, | |
2885 | }; | |
2886 | ||
3f542974 PS |
2887 | static struct usb_serial_driver moschip7840_4port_device = { |
2888 | .driver = { | |
2889 | .owner = THIS_MODULE, | |
2890 | .name = "mos7840", | |
2891 | }, | |
2892 | .description = DRIVER_DESC, | |
d9b1b787 | 2893 | .usb_driver = &io_driver, |
3f542974 PS |
2894 | .id_table = moschip_port_id_table, |
2895 | .num_interrupt_in = 1, //NUM_DONT_CARE,//1, | |
2896 | #ifdef check | |
2897 | .num_bulk_in = 4, | |
2898 | .num_bulk_out = 4, | |
2899 | .num_ports = 4, | |
2900 | #endif | |
2901 | .open = mos7840_open, | |
2902 | .close = mos7840_close, | |
2903 | .write = mos7840_write, | |
2904 | .write_room = mos7840_write_room, | |
2905 | .chars_in_buffer = mos7840_chars_in_buffer, | |
2906 | .throttle = mos7840_throttle, | |
2907 | .unthrottle = mos7840_unthrottle, | |
2908 | .calc_num_ports = mos7840_calc_num_ports, | |
2909 | #ifdef MCSSerialProbe | |
2910 | .probe = mos7840_serial_probe, | |
2911 | #endif | |
2912 | .ioctl = mos7840_ioctl, | |
2913 | .set_termios = mos7840_set_termios, | |
2914 | .break_ctl = mos7840_break, | |
2915 | .tiocmget = mos7840_tiocmget, | |
2916 | .tiocmset = mos7840_tiocmset, | |
2917 | .attach = mos7840_startup, | |
2918 | .shutdown = mos7840_shutdown, | |
2919 | .read_bulk_callback = mos7840_bulk_in_callback, | |
2920 | .read_int_callback = mos7840_interrupt_callback, | |
2921 | }; | |
2922 | ||
3f542974 PS |
2923 | /**************************************************************************** |
2924 | * moschip7840_init | |
2925 | * This is called by the module subsystem, or on startup to initialize us | |
2926 | ****************************************************************************/ | |
2927 | static int __init moschip7840_init(void) | |
2928 | { | |
2929 | int retval; | |
2930 | ||
2931 | dbg("%s \n", " mos7840_init :entering.........."); | |
2932 | ||
2933 | /* Register with the usb serial */ | |
2934 | retval = usb_serial_register(&moschip7840_4port_device); | |
2935 | ||
2936 | if (retval) | |
2937 | goto failed_port_device_register; | |
2938 | ||
2939 | dbg("%s\n", "Entring..."); | |
2940 | info(DRIVER_DESC " " DRIVER_VERSION); | |
2941 | ||
2942 | /* Register with the usb */ | |
2943 | retval = usb_register(&io_driver); | |
2944 | ||
2945 | if (retval) | |
2946 | goto failed_usb_register; | |
2947 | ||
2948 | if (retval == 0) { | |
2949 | dbg("%s\n", "Leaving..."); | |
2950 | return 0; | |
2951 | } | |
2952 | ||
2953 | failed_usb_register: | |
2954 | usb_serial_deregister(&moschip7840_4port_device); | |
2955 | ||
2956 | failed_port_device_register: | |
2957 | ||
2958 | return retval; | |
2959 | } | |
2960 | ||
2961 | /**************************************************************************** | |
2962 | * moschip7840_exit | |
2963 | * Called when the driver is about to be unloaded. | |
2964 | ****************************************************************************/ | |
2965 | static void __exit moschip7840_exit(void) | |
2966 | { | |
2967 | ||
2968 | dbg("%s \n", " mos7840_exit :entering.........."); | |
2969 | ||
2970 | usb_deregister(&io_driver); | |
2971 | ||
2972 | usb_serial_deregister(&moschip7840_4port_device); | |
2973 | ||
2974 | dbg("%s\n", "Entring..."); | |
2975 | } | |
2976 | ||
2977 | module_init(moschip7840_init); | |
2978 | module_exit(moschip7840_exit); | |
2979 | ||
2980 | /* Module information */ | |
2981 | MODULE_DESCRIPTION(DRIVER_DESC); | |
2982 | MODULE_LICENSE("GPL"); | |
2983 | ||
2984 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
2985 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |