Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* vi: ts=8 sw=8 |
2 | * | |
3 | * TI 3410/5052 USB Serial Driver | |
4 | * | |
5 | * Copyright (C) 2004 Texas Instruments | |
6 | * | |
7 | * This driver is based on the Linux io_ti driver, which is | |
8 | * Copyright (C) 2000-2002 Inside Out Networks | |
9 | * Copyright (C) 2001-2002 Greg Kroah-Hartman | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License as published by | |
13 | * the Free Software Foundation; either version 2 of the License, or | |
14 | * (at your option) any later version. | |
15 | * | |
16 | * For questions or problems with this driver, contact Texas Instruments | |
17 | * technical support, or Al Borchers <alborchers@steinerpoint.com>, or | |
18 | * Peter Berger <pberger@brimson.com>. | |
19 | * | |
20 | * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 | |
21 | * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device | |
22 | * configuration. | |
23 | * | |
24 | * #!/bin/bash | |
25 | * | |
26 | * BOOT_CONFIG=1 | |
27 | * ACTIVE_CONFIG=2 | |
28 | * | |
29 | * if [[ "$ACTION" != "add" ]] | |
30 | * then | |
31 | * exit | |
32 | * fi | |
33 | * | |
34 | * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue | |
35 | * | |
36 | * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] | |
37 | * then | |
38 | * exit | |
39 | * fi | |
40 | * | |
41 | * PRODUCT=${PRODUCT%/?*} # delete version | |
42 | * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` | |
43 | * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` | |
44 | * | |
45 | * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters | |
46 | * | |
47 | * function scan() { | |
48 | * s=$1 | |
49 | * shift | |
50 | * for i | |
51 | * do | |
52 | * if [[ $s -eq $i ]] | |
53 | * then | |
54 | * return 0 | |
55 | * fi | |
56 | * done | |
57 | * return 1 | |
58 | * } | |
59 | * | |
60 | * IFS=$IFS, | |
61 | * | |
62 | * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && | |
63 | * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || | |
64 | * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && | |
65 | * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) | |
66 | * then | |
67 | * echo $ACTIVE_CONFIG > $CONFIG_PATH | |
68 | * fi | |
69 | */ | |
70 | ||
71 | #include <linux/config.h> | |
72 | #include <linux/kernel.h> | |
73 | #include <linux/errno.h> | |
74 | #include <linux/init.h> | |
75 | #include <linux/slab.h> | |
76 | #include <linux/tty.h> | |
77 | #include <linux/tty_driver.h> | |
78 | #include <linux/tty_flip.h> | |
79 | #include <linux/module.h> | |
80 | #include <linux/spinlock.h> | |
81 | #include <linux/ioctl.h> | |
82 | #include <linux/serial.h> | |
83 | #include <linux/circ_buf.h> | |
84 | #include <asm/uaccess.h> | |
85 | #include <asm/semaphore.h> | |
86 | #include <linux/usb.h> | |
87 | ||
88 | #include "usb-serial.h" | |
89 | #include "ti_usb_3410_5052.h" | |
90 | #include "ti_fw_3410.h" /* firmware image for 3410 */ | |
91 | #include "ti_fw_5052.h" /* firmware image for 5052 */ | |
92 | ||
93 | ||
94 | /* Defines */ | |
95 | ||
96 | #define TI_DRIVER_VERSION "v0.9" | |
97 | #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>" | |
98 | #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" | |
99 | ||
100 | #define TI_FIRMWARE_BUF_SIZE 16284 | |
101 | ||
102 | #define TI_WRITE_BUF_SIZE 1024 | |
103 | ||
104 | #define TI_TRANSFER_TIMEOUT 2 | |
105 | ||
106 | #define TI_DEFAULT_LOW_LATENCY 0 | |
107 | #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ | |
108 | ||
109 | /* supported setserial flags */ | |
110 | #define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY) | |
111 | ||
112 | /* read urb states */ | |
113 | #define TI_READ_URB_RUNNING 0 | |
114 | #define TI_READ_URB_STOPPING 1 | |
115 | #define TI_READ_URB_STOPPED 2 | |
116 | ||
117 | #define TI_EXTRA_VID_PID_COUNT 5 | |
118 | ||
119 | ||
120 | /* Structures */ | |
121 | ||
122 | struct ti_port { | |
123 | int tp_is_open; | |
124 | __u8 tp_msr; | |
125 | __u8 tp_lsr; | |
126 | __u8 tp_shadow_mcr; | |
127 | __u8 tp_uart_mode; /* 232 or 485 modes */ | |
128 | unsigned int tp_uart_base_addr; | |
129 | int tp_flags; | |
130 | int tp_closing_wait;/* in .01 secs */ | |
131 | struct async_icount tp_icount; | |
132 | wait_queue_head_t tp_msr_wait; /* wait for msr change */ | |
133 | wait_queue_head_t tp_write_wait; | |
134 | struct ti_device *tp_tdev; | |
135 | struct usb_serial_port *tp_port; | |
136 | spinlock_t tp_lock; | |
137 | int tp_read_urb_state; | |
138 | int tp_write_urb_in_use; | |
139 | struct circ_buf *tp_write_buf; | |
140 | }; | |
141 | ||
142 | struct ti_device { | |
143 | struct semaphore td_open_close_sem; | |
144 | int td_open_port_count; | |
145 | struct usb_serial *td_serial; | |
146 | int td_is_3410; | |
147 | int td_urb_error; | |
148 | }; | |
149 | ||
150 | ||
151 | /* Function Declarations */ | |
152 | ||
153 | static int ti_startup(struct usb_serial *serial); | |
154 | static void ti_shutdown(struct usb_serial *serial); | |
155 | static int ti_open(struct usb_serial_port *port, struct file *file); | |
156 | static void ti_close(struct usb_serial_port *port, struct file *file); | |
157 | static int ti_write(struct usb_serial_port *port, const unsigned char *data, | |
158 | int count); | |
159 | static int ti_write_room(struct usb_serial_port *port); | |
160 | static int ti_chars_in_buffer(struct usb_serial_port *port); | |
161 | static void ti_throttle(struct usb_serial_port *port); | |
162 | static void ti_unthrottle(struct usb_serial_port *port); | |
163 | static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg); | |
164 | static void ti_set_termios(struct usb_serial_port *port, | |
165 | struct termios *old_termios); | |
166 | static int ti_tiocmget(struct usb_serial_port *port, struct file *file); | |
167 | static int ti_tiocmset(struct usb_serial_port *port, struct file *file, | |
168 | unsigned int set, unsigned int clear); | |
169 | static void ti_break(struct usb_serial_port *port, int break_state); | |
170 | static void ti_interrupt_callback(struct urb *urb, struct pt_regs *regs); | |
171 | static void ti_bulk_in_callback(struct urb *urb, struct pt_regs *regs); | |
172 | static void ti_bulk_out_callback(struct urb *urb, struct pt_regs *regs); | |
173 | ||
174 | static void ti_recv(struct device *dev, struct tty_struct *tty, | |
175 | unsigned char *data, int length); | |
176 | static void ti_send(struct ti_port *tport); | |
177 | static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); | |
178 | static int ti_get_lsr(struct ti_port *tport); | |
179 | static int ti_get_serial_info(struct ti_port *tport, | |
180 | struct serial_struct __user *ret_arg); | |
181 | static int ti_set_serial_info(struct ti_port *tport, | |
182 | struct serial_struct __user *new_arg); | |
183 | static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); | |
184 | ||
185 | static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush); | |
186 | ||
187 | static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); | |
188 | static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); | |
189 | ||
190 | static int ti_command_out_sync(struct ti_device *tdev, __u8 command, | |
191 | __u16 moduleid, __u16 value, __u8 *data, int size); | |
192 | static int ti_command_in_sync(struct ti_device *tdev, __u8 command, | |
193 | __u16 moduleid, __u16 value, __u8 *data, int size); | |
194 | ||
195 | static int ti_write_byte(struct ti_device *tdev, unsigned long addr, | |
196 | __u8 mask, __u8 byte); | |
197 | ||
198 | static int ti_download_firmware(struct ti_device *tdev, | |
199 | unsigned char *firmware, unsigned int firmware_size); | |
200 | ||
201 | /* circular buffer */ | |
202 | static struct circ_buf *ti_buf_alloc(void); | |
203 | static void ti_buf_free(struct circ_buf *cb); | |
204 | static void ti_buf_clear(struct circ_buf *cb); | |
205 | static int ti_buf_data_avail(struct circ_buf *cb); | |
206 | static int ti_buf_space_avail(struct circ_buf *cb); | |
207 | static int ti_buf_put(struct circ_buf *cb, const char *buf, int count); | |
208 | static int ti_buf_get(struct circ_buf *cb, char *buf, int count); | |
209 | ||
210 | ||
211 | /* Data */ | |
212 | ||
213 | /* module parameters */ | |
214 | static int debug; | |
215 | static int low_latency = TI_DEFAULT_LOW_LATENCY; | |
216 | static int closing_wait = TI_DEFAULT_CLOSING_WAIT; | |
217 | static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; | |
218 | static int vendor_3410_count; | |
219 | static ushort product_3410[TI_EXTRA_VID_PID_COUNT]; | |
220 | static int product_3410_count; | |
221 | static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT]; | |
222 | static int vendor_5052_count; | |
223 | static ushort product_5052[TI_EXTRA_VID_PID_COUNT]; | |
224 | static int product_5052_count; | |
225 | ||
226 | /* supported devices */ | |
227 | /* the array dimension is the number of default entries plus */ | |
228 | /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ | |
229 | /* null entry */ | |
230 | static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = { | |
231 | { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, | |
232 | }; | |
233 | ||
234 | static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { | |
235 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, | |
236 | { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, | |
237 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, | |
238 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, | |
239 | }; | |
240 | ||
241 | static struct usb_device_id ti_id_table_combined[] = { | |
242 | { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, | |
243 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, | |
244 | { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, | |
245 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, | |
246 | { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, | |
247 | { } | |
248 | }; | |
249 | ||
250 | static struct usb_driver ti_usb_driver = { | |
1da177e4 LT |
251 | .name = "ti_usb_3410_5052", |
252 | .probe = usb_serial_probe, | |
253 | .disconnect = usb_serial_disconnect, | |
254 | .id_table = ti_id_table_combined, | |
ba9dc657 | 255 | .no_dynamic_id = 1, |
1da177e4 LT |
256 | }; |
257 | ||
ea65370d | 258 | static struct usb_serial_driver ti_1port_device = { |
18fcac35 | 259 | .driver = { |
269bda1c GKH |
260 | .owner = THIS_MODULE, |
261 | .name = "ti_usb_3410_5052_1", | |
18fcac35 | 262 | }, |
269bda1c | 263 | .description = "TI USB 3410 1 port adapter", |
1da177e4 LT |
264 | .id_table = ti_id_table_3410, |
265 | .num_interrupt_in = 1, | |
266 | .num_bulk_in = 1, | |
267 | .num_bulk_out = 1, | |
268 | .num_ports = 1, | |
269 | .attach = ti_startup, | |
270 | .shutdown = ti_shutdown, | |
271 | .open = ti_open, | |
272 | .close = ti_close, | |
273 | .write = ti_write, | |
274 | .write_room = ti_write_room, | |
275 | .chars_in_buffer = ti_chars_in_buffer, | |
276 | .throttle = ti_throttle, | |
277 | .unthrottle = ti_unthrottle, | |
278 | .ioctl = ti_ioctl, | |
279 | .set_termios = ti_set_termios, | |
280 | .tiocmget = ti_tiocmget, | |
281 | .tiocmset = ti_tiocmset, | |
282 | .break_ctl = ti_break, | |
283 | .read_int_callback = ti_interrupt_callback, | |
284 | .read_bulk_callback = ti_bulk_in_callback, | |
285 | .write_bulk_callback = ti_bulk_out_callback, | |
286 | }; | |
287 | ||
ea65370d | 288 | static struct usb_serial_driver ti_2port_device = { |
18fcac35 | 289 | .driver = { |
269bda1c GKH |
290 | .owner = THIS_MODULE, |
291 | .name = "ti_usb_3410_5052_2", | |
18fcac35 | 292 | }, |
269bda1c | 293 | .description = "TI USB 5052 2 port adapter", |
1da177e4 LT |
294 | .id_table = ti_id_table_5052, |
295 | .num_interrupt_in = 1, | |
296 | .num_bulk_in = 2, | |
297 | .num_bulk_out = 2, | |
298 | .num_ports = 2, | |
299 | .attach = ti_startup, | |
300 | .shutdown = ti_shutdown, | |
301 | .open = ti_open, | |
302 | .close = ti_close, | |
303 | .write = ti_write, | |
304 | .write_room = ti_write_room, | |
305 | .chars_in_buffer = ti_chars_in_buffer, | |
306 | .throttle = ti_throttle, | |
307 | .unthrottle = ti_unthrottle, | |
308 | .ioctl = ti_ioctl, | |
309 | .set_termios = ti_set_termios, | |
310 | .tiocmget = ti_tiocmget, | |
311 | .tiocmset = ti_tiocmset, | |
312 | .break_ctl = ti_break, | |
313 | .read_int_callback = ti_interrupt_callback, | |
314 | .read_bulk_callback = ti_bulk_in_callback, | |
315 | .write_bulk_callback = ti_bulk_out_callback, | |
316 | }; | |
317 | ||
318 | ||
319 | /* Module */ | |
320 | ||
321 | MODULE_AUTHOR(TI_DRIVER_AUTHOR); | |
322 | MODULE_DESCRIPTION(TI_DRIVER_DESC); | |
323 | MODULE_VERSION(TI_DRIVER_VERSION); | |
324 | MODULE_LICENSE("GPL"); | |
325 | ||
326 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
327 | MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); | |
328 | ||
329 | module_param(low_latency, bool, S_IRUGO | S_IWUSR); | |
330 | MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off"); | |
331 | ||
332 | module_param(closing_wait, int, S_IRUGO | S_IWUSR); | |
333 | MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); | |
334 | ||
335 | module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO); | |
336 | MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers"); | |
337 | module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO); | |
338 | MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers"); | |
339 | module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO); | |
340 | MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers"); | |
341 | module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO); | |
342 | MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers"); | |
343 | ||
344 | MODULE_DEVICE_TABLE(usb, ti_id_table_combined); | |
345 | ||
346 | ||
347 | /* Functions */ | |
348 | ||
349 | static int __init ti_init(void) | |
350 | { | |
351 | int i,j; | |
352 | int ret; | |
353 | ||
1da177e4 | 354 | /* insert extra vendor and product ids */ |
52950ed4 | 355 | j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1; |
1da177e4 LT |
356 | for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) { |
357 | ti_id_table_3410[j].idVendor = vendor_3410[i]; | |
358 | ti_id_table_3410[j].idProduct = product_3410[i]; | |
359 | ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; | |
360 | } | |
52950ed4 | 361 | j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1; |
1da177e4 LT |
362 | for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) { |
363 | ti_id_table_5052[j].idVendor = vendor_5052[i]; | |
364 | ti_id_table_5052[j].idProduct = product_5052[i]; | |
365 | ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; | |
366 | } | |
367 | ||
368 | ret = usb_serial_register(&ti_1port_device); | |
369 | if (ret) | |
370 | goto failed_1port; | |
371 | ret = usb_serial_register(&ti_2port_device); | |
372 | if (ret) | |
373 | goto failed_2port; | |
374 | ||
375 | ret = usb_register(&ti_usb_driver); | |
376 | if (ret) | |
377 | goto failed_usb; | |
378 | ||
379 | info(TI_DRIVER_DESC " " TI_DRIVER_VERSION); | |
380 | ||
381 | return 0; | |
382 | ||
383 | failed_usb: | |
384 | usb_serial_deregister(&ti_2port_device); | |
385 | failed_2port: | |
386 | usb_serial_deregister(&ti_1port_device); | |
387 | failed_1port: | |
388 | return ret; | |
389 | } | |
390 | ||
391 | ||
392 | static void __exit ti_exit(void) | |
393 | { | |
394 | usb_serial_deregister(&ti_1port_device); | |
395 | usb_serial_deregister(&ti_2port_device); | |
396 | usb_deregister(&ti_usb_driver); | |
397 | } | |
398 | ||
399 | ||
400 | module_init(ti_init); | |
401 | module_exit(ti_exit); | |
402 | ||
403 | ||
404 | static int ti_startup(struct usb_serial *serial) | |
405 | { | |
406 | struct ti_device *tdev; | |
407 | struct ti_port *tport; | |
408 | struct usb_device *dev = serial->dev; | |
409 | int status; | |
410 | int i; | |
411 | ||
412 | ||
413 | dbg("%s - product 0x%4X, num configurations %d, configuration value %d", | |
414 | __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct), | |
415 | dev->descriptor.bNumConfigurations, | |
416 | dev->actconfig->desc.bConfigurationValue); | |
417 | ||
418 | /* create device structure */ | |
419 | tdev = kmalloc(sizeof(struct ti_device), GFP_KERNEL); | |
420 | if (tdev == NULL) { | |
421 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
422 | return -ENOMEM; | |
423 | } | |
424 | memset(tdev, 0, sizeof(struct ti_device)); | |
425 | sema_init(&tdev->td_open_close_sem, 1); | |
426 | tdev->td_serial = serial; | |
427 | usb_set_serial_data(serial, tdev); | |
428 | ||
429 | /* determine device type */ | |
430 | if (usb_match_id(serial->interface, ti_id_table_3410)) | |
431 | tdev->td_is_3410 = 1; | |
432 | dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052"); | |
433 | ||
434 | /* if we have only 1 configuration, download firmware */ | |
435 | if (dev->descriptor.bNumConfigurations == 1) { | |
436 | ||
437 | if (tdev->td_is_3410) | |
438 | status = ti_download_firmware(tdev, ti_fw_3410, | |
439 | sizeof(ti_fw_3410)); | |
440 | else | |
441 | status = ti_download_firmware(tdev, ti_fw_5052, | |
442 | sizeof(ti_fw_5052)); | |
443 | if (status) | |
444 | goto free_tdev; | |
445 | ||
446 | /* 3410 must be reset, 5052 resets itself */ | |
447 | if (tdev->td_is_3410) { | |
448 | msleep_interruptible(100); | |
449 | usb_reset_device(dev); | |
450 | } | |
451 | ||
452 | status = -ENODEV; | |
453 | goto free_tdev; | |
454 | } | |
455 | ||
456 | /* the second configuration must be set (in sysfs by hotplug script) */ | |
457 | if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { | |
458 | status = -ENODEV; | |
459 | goto free_tdev; | |
460 | } | |
461 | ||
462 | /* set up port structures */ | |
463 | for (i = 0; i < serial->num_ports; ++i) { | |
464 | tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL); | |
465 | if (tport == NULL) { | |
466 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
467 | status = -ENOMEM; | |
468 | goto free_tports; | |
469 | } | |
470 | memset(tport, 0, sizeof(struct ti_port)); | |
471 | spin_lock_init(&tport->tp_lock); | |
472 | tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); | |
473 | tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; | |
474 | tport->tp_closing_wait = closing_wait; | |
475 | init_waitqueue_head(&tport->tp_msr_wait); | |
476 | init_waitqueue_head(&tport->tp_write_wait); | |
477 | tport->tp_write_buf = ti_buf_alloc(); | |
478 | if (tport->tp_write_buf == NULL) { | |
479 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
480 | kfree(tport); | |
481 | status = -ENOMEM; | |
482 | goto free_tports; | |
483 | } | |
484 | tport->tp_port = serial->port[i]; | |
485 | tport->tp_tdev = tdev; | |
486 | usb_set_serial_port_data(serial->port[i], tport); | |
487 | tport->tp_uart_mode = 0; /* default is RS232 */ | |
488 | } | |
489 | ||
490 | return 0; | |
491 | ||
492 | free_tports: | |
493 | for (--i; i>=0; --i) { | |
494 | tport = usb_get_serial_port_data(serial->port[i]); | |
495 | ti_buf_free(tport->tp_write_buf); | |
496 | kfree(tport); | |
497 | usb_set_serial_port_data(serial->port[i], NULL); | |
498 | } | |
499 | free_tdev: | |
500 | kfree(tdev); | |
501 | usb_set_serial_data(serial, NULL); | |
502 | return status; | |
503 | } | |
504 | ||
505 | ||
506 | static void ti_shutdown(struct usb_serial *serial) | |
507 | { | |
508 | int i; | |
509 | struct ti_device *tdev = usb_get_serial_data(serial); | |
510 | struct ti_port *tport; | |
511 | ||
512 | dbg("%s", __FUNCTION__); | |
513 | ||
514 | for (i=0; i < serial->num_ports; ++i) { | |
515 | tport = usb_get_serial_port_data(serial->port[i]); | |
516 | if (tport) { | |
517 | ti_buf_free(tport->tp_write_buf); | |
518 | kfree(tport); | |
519 | usb_set_serial_port_data(serial->port[i], NULL); | |
520 | } | |
521 | } | |
522 | ||
1bc3c9e1 | 523 | kfree(tdev); |
1da177e4 LT |
524 | usb_set_serial_data(serial, NULL); |
525 | } | |
526 | ||
527 | ||
528 | static int ti_open(struct usb_serial_port *port, struct file *file) | |
529 | { | |
530 | struct ti_port *tport = usb_get_serial_port_data(port); | |
531 | struct ti_device *tdev; | |
532 | struct usb_device *dev; | |
533 | struct urb *urb; | |
534 | int port_number; | |
535 | int status; | |
536 | __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | | |
537 | TI_PIPE_TIMEOUT_ENABLE | | |
538 | (TI_TRANSFER_TIMEOUT << 2)); | |
539 | ||
540 | dbg("%s - port %d", __FUNCTION__, port->number); | |
541 | ||
542 | if (tport == NULL) | |
543 | return -ENODEV; | |
544 | ||
545 | dev = port->serial->dev; | |
546 | tdev = tport->tp_tdev; | |
547 | ||
548 | /* only one open on any port on a device at a time */ | |
549 | if (down_interruptible(&tdev->td_open_close_sem)) | |
550 | return -ERESTARTSYS; | |
551 | ||
552 | if (port->tty) | |
553 | port->tty->low_latency = | |
554 | (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
555 | ||
556 | port_number = port->number - port->serial->minor; | |
557 | ||
558 | memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); | |
559 | ||
560 | tport->tp_msr = 0; | |
561 | tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); | |
562 | ||
563 | /* start interrupt urb the first time a port is opened on this device */ | |
564 | if (tdev->td_open_port_count == 0) { | |
565 | dbg("%s - start interrupt in urb", __FUNCTION__); | |
566 | urb = tdev->td_serial->port[0]->interrupt_in_urb; | |
567 | if (!urb) { | |
568 | dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__); | |
569 | status = -EINVAL; | |
570 | goto up_sem; | |
571 | } | |
572 | urb->complete = ti_interrupt_callback; | |
573 | urb->context = tdev; | |
574 | urb->dev = dev; | |
575 | status = usb_submit_urb(urb, GFP_KERNEL); | |
576 | if (status) { | |
577 | dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status); | |
578 | goto up_sem; | |
579 | } | |
580 | } | |
581 | ||
582 | ti_set_termios(port, NULL); | |
583 | ||
584 | dbg("%s - sending TI_OPEN_PORT", __FUNCTION__); | |
585 | status = ti_command_out_sync(tdev, TI_OPEN_PORT, | |
586 | (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); | |
587 | if (status) { | |
588 | dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status); | |
589 | goto unlink_int_urb; | |
590 | } | |
591 | ||
592 | dbg("%s - sending TI_START_PORT", __FUNCTION__); | |
593 | status = ti_command_out_sync(tdev, TI_START_PORT, | |
594 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
595 | if (status) { | |
596 | dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status); | |
597 | goto unlink_int_urb; | |
598 | } | |
599 | ||
600 | dbg("%s - sending TI_PURGE_PORT", __FUNCTION__); | |
601 | status = ti_command_out_sync(tdev, TI_PURGE_PORT, | |
602 | (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); | |
603 | if (status) { | |
604 | dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status); | |
605 | goto unlink_int_urb; | |
606 | } | |
607 | status = ti_command_out_sync(tdev, TI_PURGE_PORT, | |
608 | (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); | |
609 | if (status) { | |
610 | dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status); | |
611 | goto unlink_int_urb; | |
612 | } | |
613 | ||
614 | /* reset the data toggle on the bulk endpoints to work around bug in | |
615 | * host controllers where things get out of sync some times */ | |
616 | usb_clear_halt(dev, port->write_urb->pipe); | |
617 | usb_clear_halt(dev, port->read_urb->pipe); | |
618 | ||
619 | ti_set_termios(port, NULL); | |
620 | ||
621 | dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__); | |
622 | status = ti_command_out_sync(tdev, TI_OPEN_PORT, | |
623 | (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); | |
624 | if (status) { | |
625 | dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status); | |
626 | goto unlink_int_urb; | |
627 | } | |
628 | ||
629 | dbg("%s - sending TI_START_PORT (2)", __FUNCTION__); | |
630 | status = ti_command_out_sync(tdev, TI_START_PORT, | |
631 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
632 | if (status) { | |
633 | dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status); | |
634 | goto unlink_int_urb; | |
635 | } | |
636 | ||
637 | /* start read urb */ | |
638 | dbg("%s - start read urb", __FUNCTION__); | |
639 | urb = port->read_urb; | |
640 | if (!urb) { | |
641 | dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__); | |
642 | status = -EINVAL; | |
643 | goto unlink_int_urb; | |
644 | } | |
645 | tport->tp_read_urb_state = TI_READ_URB_RUNNING; | |
646 | urb->complete = ti_bulk_in_callback; | |
647 | urb->context = tport; | |
648 | urb->dev = dev; | |
649 | status = usb_submit_urb(urb, GFP_KERNEL); | |
650 | if (status) { | |
651 | dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status); | |
652 | goto unlink_int_urb; | |
653 | } | |
654 | ||
655 | tport->tp_is_open = 1; | |
656 | ++tdev->td_open_port_count; | |
657 | ||
658 | goto up_sem; | |
659 | ||
660 | unlink_int_urb: | |
661 | if (tdev->td_open_port_count == 0) | |
662 | usb_kill_urb(port->serial->port[0]->interrupt_in_urb); | |
663 | up_sem: | |
664 | up(&tdev->td_open_close_sem); | |
665 | dbg("%s - exit %d", __FUNCTION__, status); | |
666 | return status; | |
667 | } | |
668 | ||
669 | ||
670 | static void ti_close(struct usb_serial_port *port, struct file *file) | |
671 | { | |
672 | struct ti_device *tdev; | |
673 | struct ti_port *tport; | |
674 | int port_number; | |
675 | int status; | |
676 | int do_up; | |
677 | ||
678 | dbg("%s - port %d", __FUNCTION__, port->number); | |
679 | ||
680 | tdev = usb_get_serial_data(port->serial); | |
681 | tport = usb_get_serial_port_data(port); | |
682 | if (tdev == NULL || tport == NULL) | |
683 | return; | |
684 | ||
685 | tport->tp_is_open = 0; | |
686 | ||
687 | ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1); | |
688 | ||
689 | usb_kill_urb(port->read_urb); | |
690 | usb_kill_urb(port->write_urb); | |
691 | tport->tp_write_urb_in_use = 0; | |
692 | ||
693 | port_number = port->number - port->serial->minor; | |
694 | ||
695 | dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__); | |
696 | status = ti_command_out_sync(tdev, TI_CLOSE_PORT, | |
697 | (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); | |
698 | if (status) | |
699 | dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status); | |
700 | ||
701 | /* if down is interrupted, continue anyway */ | |
702 | do_up = !down_interruptible(&tdev->td_open_close_sem); | |
703 | --tport->tp_tdev->td_open_port_count; | |
704 | if (tport->tp_tdev->td_open_port_count <= 0) { | |
705 | /* last port is closed, shut down interrupt urb */ | |
706 | usb_kill_urb(port->serial->port[0]->interrupt_in_urb); | |
707 | tport->tp_tdev->td_open_port_count = 0; | |
708 | } | |
709 | if (do_up) | |
710 | up(&tdev->td_open_close_sem); | |
711 | ||
712 | dbg("%s - exit", __FUNCTION__); | |
713 | } | |
714 | ||
715 | ||
716 | static int ti_write(struct usb_serial_port *port, const unsigned char *data, | |
717 | int count) | |
718 | { | |
719 | struct ti_port *tport = usb_get_serial_port_data(port); | |
720 | unsigned long flags; | |
721 | ||
722 | dbg("%s - port %d", __FUNCTION__, port->number); | |
723 | ||
724 | if (count == 0) { | |
725 | dbg("%s - write request of 0 bytes", __FUNCTION__); | |
726 | return 0; | |
727 | } | |
728 | ||
729 | if (tport == NULL || !tport->tp_is_open) | |
730 | return -ENODEV; | |
731 | ||
732 | spin_lock_irqsave(&tport->tp_lock, flags); | |
733 | count = ti_buf_put(tport->tp_write_buf, data, count); | |
734 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
735 | ||
736 | ti_send(tport); | |
737 | ||
738 | return count; | |
739 | } | |
740 | ||
741 | ||
742 | static int ti_write_room(struct usb_serial_port *port) | |
743 | { | |
744 | struct ti_port *tport = usb_get_serial_port_data(port); | |
745 | int room = 0; | |
746 | unsigned long flags; | |
747 | ||
748 | dbg("%s - port %d", __FUNCTION__, port->number); | |
749 | ||
750 | if (tport == NULL) | |
751 | return -ENODEV; | |
752 | ||
753 | spin_lock_irqsave(&tport->tp_lock, flags); | |
754 | room = ti_buf_space_avail(tport->tp_write_buf); | |
755 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
756 | ||
757 | dbg("%s - returns %d", __FUNCTION__, room); | |
758 | return room; | |
759 | } | |
760 | ||
761 | ||
762 | static int ti_chars_in_buffer(struct usb_serial_port *port) | |
763 | { | |
764 | struct ti_port *tport = usb_get_serial_port_data(port); | |
765 | int chars = 0; | |
766 | unsigned long flags; | |
767 | ||
768 | dbg("%s - port %d", __FUNCTION__, port->number); | |
769 | ||
770 | if (tport == NULL) | |
771 | return -ENODEV; | |
772 | ||
773 | spin_lock_irqsave(&tport->tp_lock, flags); | |
774 | chars = ti_buf_data_avail(tport->tp_write_buf); | |
775 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
776 | ||
777 | dbg("%s - returns %d", __FUNCTION__, chars); | |
778 | return chars; | |
779 | } | |
780 | ||
781 | ||
782 | static void ti_throttle(struct usb_serial_port *port) | |
783 | { | |
784 | struct ti_port *tport = usb_get_serial_port_data(port); | |
785 | struct tty_struct *tty; | |
786 | ||
787 | dbg("%s - port %d", __FUNCTION__, port->number); | |
788 | ||
789 | if (tport == NULL) | |
790 | return; | |
791 | ||
792 | tty = port->tty; | |
793 | if (!tty) { | |
794 | dbg("%s - no tty", __FUNCTION__); | |
795 | return; | |
796 | } | |
797 | ||
798 | if (I_IXOFF(tty) || C_CRTSCTS(tty)) | |
799 | ti_stop_read(tport, tty); | |
800 | ||
801 | } | |
802 | ||
803 | ||
804 | static void ti_unthrottle(struct usb_serial_port *port) | |
805 | { | |
806 | struct ti_port *tport = usb_get_serial_port_data(port); | |
807 | struct tty_struct *tty; | |
808 | int status; | |
809 | ||
810 | dbg("%s - port %d", __FUNCTION__, port->number); | |
811 | ||
812 | if (tport == NULL) | |
813 | return; | |
814 | ||
815 | tty = port->tty; | |
816 | if (!tty) { | |
817 | dbg("%s - no tty", __FUNCTION__); | |
818 | return; | |
819 | } | |
820 | ||
821 | if (I_IXOFF(tty) || C_CRTSCTS(tty)) { | |
822 | status = ti_restart_read(tport, tty); | |
823 | if (status) | |
824 | dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status); | |
825 | } | |
826 | } | |
827 | ||
828 | ||
829 | static int ti_ioctl(struct usb_serial_port *port, struct file *file, | |
830 | unsigned int cmd, unsigned long arg) | |
831 | { | |
832 | struct ti_port *tport = usb_get_serial_port_data(port); | |
833 | struct async_icount cnow; | |
834 | struct async_icount cprev; | |
835 | ||
836 | dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd); | |
837 | ||
838 | if (tport == NULL) | |
839 | return -ENODEV; | |
840 | ||
841 | switch (cmd) { | |
842 | case TIOCGSERIAL: | |
843 | dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number); | |
844 | return ti_get_serial_info(tport, (struct serial_struct __user *)arg); | |
845 | break; | |
846 | ||
847 | case TIOCSSERIAL: | |
848 | dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number); | |
849 | return ti_set_serial_info(tport, (struct serial_struct __user *)arg); | |
850 | break; | |
851 | ||
852 | case TIOCMIWAIT: | |
853 | dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number); | |
854 | cprev = tport->tp_icount; | |
855 | while (1) { | |
856 | interruptible_sleep_on(&tport->tp_msr_wait); | |
857 | if (signal_pending(current)) | |
858 | return -ERESTARTSYS; | |
859 | cnow = tport->tp_icount; | |
860 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && | |
861 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) | |
862 | return -EIO; /* no change => error */ | |
863 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || | |
864 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
865 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
866 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { | |
867 | return 0; | |
868 | } | |
869 | cprev = cnow; | |
870 | } | |
871 | break; | |
872 | ||
873 | case TIOCGICOUNT: | |
874 | dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx); | |
875 | if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount))) | |
876 | return -EFAULT; | |
877 | return 0; | |
878 | } | |
879 | ||
880 | return -ENOIOCTLCMD; | |
881 | } | |
882 | ||
883 | ||
884 | static void ti_set_termios(struct usb_serial_port *port, | |
885 | struct termios *old_termios) | |
886 | { | |
887 | struct ti_port *tport = usb_get_serial_port_data(port); | |
888 | struct tty_struct *tty = port->tty; | |
889 | struct ti_uart_config *config; | |
890 | tcflag_t cflag,iflag; | |
891 | int baud; | |
892 | int status; | |
893 | int port_number = port->number - port->serial->minor; | |
894 | unsigned int mcr; | |
895 | ||
896 | dbg("%s - port %d", __FUNCTION__, port->number); | |
897 | ||
898 | if (!tty || !tty->termios) { | |
899 | dbg("%s - no tty or termios", __FUNCTION__); | |
900 | return; | |
901 | } | |
902 | ||
903 | cflag = tty->termios->c_cflag; | |
904 | iflag = tty->termios->c_iflag; | |
905 | ||
906 | if (old_termios && cflag == old_termios->c_cflag | |
907 | && iflag == old_termios->c_iflag) { | |
908 | dbg("%s - nothing to change", __FUNCTION__); | |
909 | return; | |
910 | } | |
911 | ||
912 | dbg("%s - clfag %08x, iflag %08x", __FUNCTION__, cflag, iflag); | |
913 | ||
914 | if (old_termios) | |
915 | dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag); | |
916 | ||
917 | if (tport == NULL) | |
918 | return; | |
919 | ||
920 | config = kmalloc(sizeof(*config), GFP_KERNEL); | |
921 | if (!config) { | |
922 | dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); | |
923 | return; | |
924 | } | |
925 | ||
926 | config->wFlags = 0; | |
927 | ||
928 | /* these flags must be set */ | |
929 | config->wFlags |= TI_UART_ENABLE_MS_INTS; | |
930 | config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA; | |
931 | config->bUartMode = (__u8)(tport->tp_uart_mode); | |
932 | ||
933 | switch (cflag & CSIZE) { | |
934 | case CS5: | |
935 | config->bDataBits = TI_UART_5_DATA_BITS; | |
936 | break; | |
937 | case CS6: | |
938 | config->bDataBits = TI_UART_6_DATA_BITS; | |
939 | break; | |
940 | case CS7: | |
941 | config->bDataBits = TI_UART_7_DATA_BITS; | |
942 | break; | |
943 | default: | |
944 | case CS8: | |
945 | config->bDataBits = TI_UART_8_DATA_BITS; | |
946 | break; | |
947 | } | |
948 | ||
949 | if (cflag & PARENB) { | |
950 | if (cflag & PARODD) { | |
951 | config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; | |
952 | config->bParity = TI_UART_ODD_PARITY; | |
953 | } else { | |
954 | config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; | |
955 | config->bParity = TI_UART_EVEN_PARITY; | |
956 | } | |
957 | } else { | |
958 | config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; | |
959 | config->bParity = TI_UART_NO_PARITY; | |
960 | } | |
961 | ||
962 | if (cflag & CSTOPB) | |
963 | config->bStopBits = TI_UART_2_STOP_BITS; | |
964 | else | |
965 | config->bStopBits = TI_UART_1_STOP_BITS; | |
966 | ||
967 | if (cflag & CRTSCTS) { | |
968 | /* RTS flow control must be off to drop RTS for baud rate B0 */ | |
969 | if ((cflag & CBAUD) != B0) | |
970 | config->wFlags |= TI_UART_ENABLE_RTS_IN; | |
971 | config->wFlags |= TI_UART_ENABLE_CTS_OUT; | |
972 | } else { | |
973 | tty->hw_stopped = 0; | |
974 | ti_restart_read(tport, tty); | |
975 | } | |
976 | ||
977 | if (I_IXOFF(tty) || I_IXON(tty)) { | |
978 | config->cXon = START_CHAR(tty); | |
979 | config->cXoff = STOP_CHAR(tty); | |
980 | ||
981 | if (I_IXOFF(tty)) | |
982 | config->wFlags |= TI_UART_ENABLE_X_IN; | |
983 | else | |
984 | ti_restart_read(tport, tty); | |
985 | ||
986 | if (I_IXON(tty)) | |
987 | config->wFlags |= TI_UART_ENABLE_X_OUT; | |
988 | } | |
989 | ||
990 | baud = tty_get_baud_rate(tty); | |
991 | if (!baud) baud = 9600; | |
992 | if (tport->tp_tdev->td_is_3410) | |
993 | config->wBaudRate = (__u16)((923077 + baud/2) / baud); | |
994 | else | |
995 | config->wBaudRate = (__u16)((461538 + baud/2) / baud); | |
996 | ||
997 | dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", | |
998 | __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); | |
999 | ||
1000 | cpu_to_be16s(&config->wBaudRate); | |
1001 | cpu_to_be16s(&config->wFlags); | |
1002 | ||
1003 | status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, | |
1004 | (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, | |
1005 | sizeof(*config)); | |
1006 | if (status) | |
1007 | dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status); | |
1008 | ||
1009 | /* SET_CONFIG asserts RTS and DTR, reset them correctly */ | |
1010 | mcr = tport->tp_shadow_mcr; | |
1011 | /* if baud rate is B0, clear RTS and DTR */ | |
1012 | if ((cflag & CBAUD) == B0) | |
1013 | mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); | |
1014 | status = ti_set_mcr(tport, mcr); | |
1015 | if (status) | |
1016 | dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status); | |
1017 | ||
1018 | kfree(config); | |
1019 | } | |
1020 | ||
1021 | ||
1022 | static int ti_tiocmget(struct usb_serial_port *port, struct file *file) | |
1023 | { | |
1024 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1025 | unsigned int result; | |
1026 | unsigned int msr; | |
1027 | unsigned int mcr; | |
1028 | ||
1029 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1030 | ||
1031 | if (tport == NULL) | |
1032 | return -ENODEV; | |
1033 | ||
1034 | msr = tport->tp_msr; | |
1035 | mcr = tport->tp_shadow_mcr; | |
1036 | ||
1037 | result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0) | |
1038 | | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0) | |
1039 | | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0) | |
1040 | | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0) | |
1041 | | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0) | |
1042 | | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) | |
1043 | | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); | |
1044 | ||
1045 | dbg("%s - 0x%04X", __FUNCTION__, result); | |
1046 | ||
1047 | return result; | |
1048 | } | |
1049 | ||
1050 | ||
1051 | static int ti_tiocmset(struct usb_serial_port *port, struct file *file, | |
1052 | unsigned int set, unsigned int clear) | |
1053 | { | |
1054 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1055 | unsigned int mcr; | |
1056 | ||
1057 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1058 | ||
1059 | if (tport == NULL) | |
1060 | return -ENODEV; | |
1061 | ||
1062 | mcr = tport->tp_shadow_mcr; | |
1063 | ||
1064 | if (set & TIOCM_RTS) | |
1065 | mcr |= TI_MCR_RTS; | |
1066 | if (set & TIOCM_DTR) | |
1067 | mcr |= TI_MCR_DTR; | |
1068 | if (set & TIOCM_LOOP) | |
1069 | mcr |= TI_MCR_LOOP; | |
1070 | ||
1071 | if (clear & TIOCM_RTS) | |
1072 | mcr &= ~TI_MCR_RTS; | |
1073 | if (clear & TIOCM_DTR) | |
1074 | mcr &= ~TI_MCR_DTR; | |
1075 | if (clear & TIOCM_LOOP) | |
1076 | mcr &= ~TI_MCR_LOOP; | |
1077 | ||
1078 | return ti_set_mcr(tport, mcr); | |
1079 | } | |
1080 | ||
1081 | ||
1082 | static void ti_break(struct usb_serial_port *port, int break_state) | |
1083 | { | |
1084 | struct ti_port *tport = usb_get_serial_port_data(port); | |
1085 | int status; | |
1086 | ||
1087 | dbg("%s - state = %d", __FUNCTION__, break_state); | |
1088 | ||
1089 | if (tport == NULL) | |
1090 | return; | |
1091 | ||
1092 | ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); | |
1093 | ||
1094 | status = ti_write_byte(tport->tp_tdev, | |
1095 | tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, | |
1096 | TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); | |
1097 | ||
1098 | if (status) | |
1099 | dbg("%s - error setting break, %d", __FUNCTION__, status); | |
1100 | } | |
1101 | ||
1102 | ||
1103 | static void ti_interrupt_callback(struct urb *urb, struct pt_regs *regs) | |
1104 | { | |
1105 | struct ti_device *tdev = (struct ti_device *)urb->context; | |
1106 | struct usb_serial_port *port; | |
1107 | struct usb_serial *serial = tdev->td_serial; | |
1108 | struct ti_port *tport; | |
1109 | struct device *dev = &urb->dev->dev; | |
1110 | unsigned char *data = urb->transfer_buffer; | |
1111 | int length = urb->actual_length; | |
1112 | int port_number; | |
1113 | int function; | |
1114 | int status; | |
1115 | __u8 msr; | |
1116 | ||
1117 | dbg("%s", __FUNCTION__); | |
1118 | ||
1119 | switch (urb->status) { | |
1120 | case 0: | |
1121 | break; | |
1122 | case -ECONNRESET: | |
1123 | case -ENOENT: | |
1124 | case -ESHUTDOWN: | |
1125 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1126 | tdev->td_urb_error = 1; | |
1127 | return; | |
1128 | default: | |
1129 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status); | |
1130 | tdev->td_urb_error = 1; | |
1131 | goto exit; | |
1132 | } | |
1133 | ||
1134 | if (length != 2) { | |
1135 | dbg("%s - bad packet size, %d", __FUNCTION__, length); | |
1136 | goto exit; | |
1137 | } | |
1138 | ||
1139 | if (data[0] == TI_CODE_HARDWARE_ERROR) { | |
1140 | dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]); | |
1141 | goto exit; | |
1142 | } | |
1143 | ||
1144 | port_number = TI_GET_PORT_FROM_CODE(data[0]); | |
1145 | function = TI_GET_FUNC_FROM_CODE(data[0]); | |
1146 | ||
1147 | dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]); | |
1148 | ||
1149 | if (port_number >= serial->num_ports) { | |
1150 | dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number); | |
1151 | goto exit; | |
1152 | } | |
1153 | ||
1154 | port = serial->port[port_number]; | |
1155 | ||
1156 | tport = usb_get_serial_port_data(port); | |
1157 | if (!tport) | |
1158 | goto exit; | |
1159 | ||
1160 | switch (function) { | |
1161 | case TI_CODE_DATA_ERROR: | |
1162 | dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]); | |
1163 | break; | |
1164 | ||
1165 | case TI_CODE_MODEM_STATUS: | |
1166 | msr = data[1]; | |
1167 | dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr); | |
1168 | ti_handle_new_msr(tport, msr); | |
1169 | break; | |
1170 | ||
1171 | default: | |
1172 | dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]); | |
1173 | break; | |
1174 | } | |
1175 | ||
1176 | exit: | |
1177 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1178 | if (status) | |
1179 | dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", __FUNCTION__, status); | |
1180 | } | |
1181 | ||
1182 | ||
1183 | static void ti_bulk_in_callback(struct urb *urb, struct pt_regs *regs) | |
1184 | { | |
1185 | struct ti_port *tport = (struct ti_port *)urb->context; | |
1186 | struct usb_serial_port *port = tport->tp_port; | |
1187 | struct device *dev = &urb->dev->dev; | |
1188 | int status = 0; | |
1189 | ||
1190 | dbg("%s", __FUNCTION__); | |
1191 | ||
1192 | switch (urb->status) { | |
1193 | case 0: | |
1194 | break; | |
1195 | case -ECONNRESET: | |
1196 | case -ENOENT: | |
1197 | case -ESHUTDOWN: | |
1198 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1199 | tport->tp_tdev->td_urb_error = 1; | |
1200 | wake_up_interruptible(&tport->tp_write_wait); | |
1201 | return; | |
1202 | default: | |
1203 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status ); | |
1204 | tport->tp_tdev->td_urb_error = 1; | |
1205 | wake_up_interruptible(&tport->tp_write_wait); | |
1206 | } | |
1207 | ||
1208 | if (urb->status == -EPIPE) | |
1209 | goto exit; | |
1210 | ||
1211 | if (urb->status) { | |
1212 | dev_err(dev, "%s - stopping read!\n", __FUNCTION__); | |
1213 | return; | |
1214 | } | |
1215 | ||
1216 | if (port->tty && urb->actual_length) { | |
1217 | usb_serial_debug_data(debug, dev, __FUNCTION__, | |
1218 | urb->actual_length, urb->transfer_buffer); | |
1219 | ||
1220 | if (!tport->tp_is_open) | |
1221 | dbg("%s - port closed, dropping data", __FUNCTION__); | |
1222 | else | |
1223 | ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer, | |
1224 | urb->actual_length); | |
1225 | ||
1226 | spin_lock(&tport->tp_lock); | |
1227 | tport->tp_icount.rx += urb->actual_length; | |
1228 | spin_unlock(&tport->tp_lock); | |
1229 | } | |
1230 | ||
1231 | exit: | |
1232 | /* continue to read unless stopping */ | |
1233 | spin_lock(&tport->tp_lock); | |
1234 | if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) { | |
1235 | urb->dev = port->serial->dev; | |
1236 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1237 | } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) { | |
1238 | tport->tp_read_urb_state = TI_READ_URB_STOPPED; | |
1239 | } | |
1240 | spin_unlock(&tport->tp_lock); | |
1241 | if (status) | |
1242 | dev_err(dev, "%s - resubmit read urb failed, %d\n", __FUNCTION__, status); | |
1243 | } | |
1244 | ||
1245 | ||
1246 | static void ti_bulk_out_callback(struct urb *urb, struct pt_regs *regs) | |
1247 | { | |
1248 | struct ti_port *tport = (struct ti_port *)urb->context; | |
1249 | struct usb_serial_port *port = tport->tp_port; | |
1250 | struct device *dev = &urb->dev->dev; | |
1251 | ||
1252 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1253 | ||
1254 | tport->tp_write_urb_in_use = 0; | |
1255 | ||
1256 | switch (urb->status) { | |
1257 | case 0: | |
1258 | break; | |
1259 | case -ECONNRESET: | |
1260 | case -ENOENT: | |
1261 | case -ESHUTDOWN: | |
1262 | dbg("%s - urb shutting down, %d", __FUNCTION__, urb->status); | |
1263 | tport->tp_tdev->td_urb_error = 1; | |
1264 | wake_up_interruptible(&tport->tp_write_wait); | |
1265 | return; | |
1266 | default: | |
1267 | dev_err(dev, "%s - nonzero urb status, %d\n", __FUNCTION__, urb->status); | |
1268 | tport->tp_tdev->td_urb_error = 1; | |
1269 | wake_up_interruptible(&tport->tp_write_wait); | |
1270 | } | |
1271 | ||
1272 | /* send any buffered data */ | |
1273 | ti_send(tport); | |
1274 | } | |
1275 | ||
1276 | ||
1277 | static void ti_recv(struct device *dev, struct tty_struct *tty, | |
1278 | unsigned char *data, int length) | |
1279 | { | |
1280 | int cnt; | |
1281 | ||
1282 | do { | |
1283 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | |
1284 | tty_flip_buffer_push(tty); | |
1285 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | |
1286 | dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length); | |
1287 | return; | |
1288 | } | |
1289 | } | |
1290 | cnt = min(length, TTY_FLIPBUF_SIZE - tty->flip.count); | |
1291 | memcpy(tty->flip.char_buf_ptr, data, cnt); | |
1292 | memset(tty->flip.flag_buf_ptr, 0, cnt); | |
1293 | tty->flip.char_buf_ptr += cnt; | |
1294 | tty->flip.flag_buf_ptr += cnt; | |
1295 | tty->flip.count += cnt; | |
1296 | data += cnt; | |
1297 | length -= cnt; | |
1298 | } while (length > 0); | |
1299 | ||
1300 | tty_flip_buffer_push(tty); | |
1301 | } | |
1302 | ||
1303 | ||
1304 | static void ti_send(struct ti_port *tport) | |
1305 | { | |
1306 | int count, result; | |
1307 | struct usb_serial_port *port = tport->tp_port; | |
1308 | struct tty_struct *tty = port->tty; | |
1309 | unsigned long flags; | |
1310 | ||
1311 | ||
1312 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1313 | ||
1314 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1315 | ||
1316 | if (tport->tp_write_urb_in_use) { | |
1317 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1318 | return; | |
1319 | } | |
1320 | ||
1321 | count = ti_buf_get(tport->tp_write_buf, | |
1322 | port->write_urb->transfer_buffer, | |
1323 | port->bulk_out_size); | |
1324 | ||
1325 | if (count == 0) { | |
1326 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1327 | return; | |
1328 | } | |
1329 | ||
1330 | tport->tp_write_urb_in_use = 1; | |
1331 | ||
1332 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1333 | ||
1334 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); | |
1335 | ||
1336 | usb_fill_bulk_urb(port->write_urb, port->serial->dev, | |
1337 | usb_sndbulkpipe(port->serial->dev, | |
1338 | port->bulk_out_endpointAddress), | |
1339 | port->write_urb->transfer_buffer, count, | |
1340 | ti_bulk_out_callback, tport); | |
1341 | ||
1342 | result = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
1343 | if (result) { | |
1344 | dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result); | |
1345 | tport->tp_write_urb_in_use = 0; | |
1346 | /* TODO: reschedule ti_send */ | |
1347 | } else { | |
1348 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1349 | tport->tp_icount.tx += count; | |
1350 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1351 | } | |
1352 | ||
1353 | /* more room in the buffer for new writes, wakeup */ | |
1354 | if (tty) | |
1355 | tty_wakeup(tty); | |
1356 | wake_up_interruptible(&tport->tp_write_wait); | |
1357 | } | |
1358 | ||
1359 | ||
1360 | static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) | |
1361 | { | |
1362 | int status; | |
1363 | ||
1364 | status = ti_write_byte(tport->tp_tdev, | |
1365 | tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, | |
1366 | TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); | |
1367 | ||
1368 | if (!status) | |
1369 | tport->tp_shadow_mcr = mcr; | |
1370 | ||
1371 | return status; | |
1372 | } | |
1373 | ||
1374 | ||
1375 | static int ti_get_lsr(struct ti_port *tport) | |
1376 | { | |
1377 | int size,status; | |
1378 | struct ti_device *tdev = tport->tp_tdev; | |
1379 | struct usb_serial_port *port = tport->tp_port; | |
1380 | int port_number = port->number - port->serial->minor; | |
1381 | struct ti_port_status *data; | |
1382 | ||
1383 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1384 | ||
1385 | size = sizeof(struct ti_port_status); | |
1386 | data = kmalloc(size, GFP_KERNEL); | |
1387 | if (!data) { | |
1388 | dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__); | |
1389 | return -ENOMEM; | |
1390 | } | |
1391 | ||
1392 | status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, | |
1393 | (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); | |
1394 | if (status) { | |
1395 | dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status); | |
1396 | goto free_data; | |
1397 | } | |
1398 | ||
1399 | dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR); | |
1400 | ||
1401 | tport->tp_lsr = data->bLSR; | |
1402 | ||
1403 | free_data: | |
1404 | kfree(data); | |
1405 | return status; | |
1406 | } | |
1407 | ||
1408 | ||
1409 | static int ti_get_serial_info(struct ti_port *tport, | |
1410 | struct serial_struct __user *ret_arg) | |
1411 | { | |
1412 | struct usb_serial_port *port = tport->tp_port; | |
1413 | struct serial_struct ret_serial; | |
1414 | ||
1415 | if (!ret_arg) | |
1416 | return -EFAULT; | |
1417 | ||
1418 | memset(&ret_serial, 0, sizeof(ret_serial)); | |
1419 | ||
1420 | ret_serial.type = PORT_16550A; | |
1421 | ret_serial.line = port->serial->minor; | |
1422 | ret_serial.port = port->number - port->serial->minor; | |
1423 | ret_serial.flags = tport->tp_flags; | |
1424 | ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; | |
1425 | ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; | |
1426 | ret_serial.closing_wait = tport->tp_closing_wait; | |
1427 | ||
1428 | if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) | |
1429 | return -EFAULT; | |
1430 | ||
1431 | return 0; | |
1432 | } | |
1433 | ||
1434 | ||
1435 | static int ti_set_serial_info(struct ti_port *tport, | |
1436 | struct serial_struct __user *new_arg) | |
1437 | { | |
1438 | struct usb_serial_port *port = tport->tp_port; | |
1439 | struct serial_struct new_serial; | |
1440 | ||
1441 | if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) | |
1442 | return -EFAULT; | |
1443 | ||
1444 | tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; | |
1445 | if (port->tty) | |
1446 | port->tty->low_latency = | |
1447 | (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
1448 | tport->tp_closing_wait = new_serial.closing_wait; | |
1449 | ||
1450 | return 0; | |
1451 | } | |
1452 | ||
1453 | ||
1454 | static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) | |
1455 | { | |
1456 | struct async_icount *icount; | |
1457 | struct tty_struct *tty; | |
1458 | unsigned long flags; | |
1459 | ||
1460 | dbg("%s - msr 0x%02X", __FUNCTION__, msr); | |
1461 | ||
1462 | if (msr & TI_MSR_DELTA_MASK) { | |
1463 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1464 | icount = &tport->tp_icount; | |
1465 | if (msr & TI_MSR_DELTA_CTS) | |
1466 | icount->cts++; | |
1467 | if (msr & TI_MSR_DELTA_DSR) | |
1468 | icount->dsr++; | |
1469 | if (msr & TI_MSR_DELTA_CD) | |
1470 | icount->dcd++; | |
1471 | if (msr & TI_MSR_DELTA_RI) | |
1472 | icount->rng++; | |
1473 | wake_up_interruptible(&tport->tp_msr_wait); | |
1474 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1475 | } | |
1476 | ||
1477 | tport->tp_msr = msr & TI_MSR_MASK; | |
1478 | ||
1479 | /* handle CTS flow control */ | |
1480 | tty = tport->tp_port->tty; | |
1481 | if (tty && C_CRTSCTS(tty)) { | |
1482 | if (msr & TI_MSR_CTS) { | |
1483 | tty->hw_stopped = 0; | |
1484 | tty_wakeup(tty); | |
1485 | } else { | |
1486 | tty->hw_stopped = 1; | |
1487 | } | |
1488 | } | |
1489 | } | |
1490 | ||
1491 | ||
1492 | static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) | |
1493 | { | |
1494 | struct ti_device *tdev = tport->tp_tdev; | |
1495 | struct usb_serial_port *port = tport->tp_port; | |
1496 | wait_queue_t wait; | |
1497 | unsigned long flags; | |
1498 | ||
1499 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1500 | ||
1501 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1502 | ||
1503 | /* wait for data to drain from the buffer */ | |
1504 | tdev->td_urb_error = 0; | |
1505 | init_waitqueue_entry(&wait, current); | |
1506 | add_wait_queue(&tport->tp_write_wait, &wait); | |
1507 | for (;;) { | |
1508 | set_current_state(TASK_INTERRUPTIBLE); | |
1509 | if (ti_buf_data_avail(tport->tp_write_buf) == 0 | |
1510 | || timeout == 0 || signal_pending(current) | |
1511 | || tdev->td_urb_error | |
1512 | || !usb_get_intfdata(port->serial->interface)) /* disconnect */ | |
1513 | break; | |
1514 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1515 | timeout = schedule_timeout(timeout); | |
1516 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1517 | } | |
1518 | set_current_state(TASK_RUNNING); | |
1519 | remove_wait_queue(&tport->tp_write_wait, &wait); | |
1520 | ||
1521 | /* flush any remaining data in the buffer */ | |
1522 | if (flush) | |
1523 | ti_buf_clear(tport->tp_write_buf); | |
1524 | ||
1525 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1526 | ||
1527 | /* wait for data to drain from the device */ | |
1528 | /* wait for empty tx register, plus 20 ms */ | |
1529 | timeout += jiffies; | |
1530 | tport->tp_lsr &= ~TI_LSR_TX_EMPTY; | |
1531 | while ((long)(jiffies - timeout) < 0 && !signal_pending(current) | |
1532 | && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error | |
1533 | && usb_get_intfdata(port->serial->interface)) { /* not disconnected */ | |
1534 | if (ti_get_lsr(tport)) | |
1535 | break; | |
1536 | msleep_interruptible(20); | |
1537 | } | |
1538 | } | |
1539 | ||
1540 | ||
1541 | static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) | |
1542 | { | |
1543 | unsigned long flags; | |
1544 | ||
1545 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1546 | ||
1547 | if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) | |
1548 | tport->tp_read_urb_state = TI_READ_URB_STOPPING; | |
1549 | ||
1550 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1551 | } | |
1552 | ||
1553 | ||
1554 | static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty) | |
1555 | { | |
1556 | struct urb *urb; | |
1557 | int status = 0; | |
1558 | unsigned long flags; | |
1559 | ||
1560 | spin_lock_irqsave(&tport->tp_lock, flags); | |
1561 | ||
1562 | if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) { | |
1563 | urb = tport->tp_port->read_urb; | |
1564 | urb->complete = ti_bulk_in_callback; | |
1565 | urb->context = tport; | |
1566 | urb->dev = tport->tp_port->serial->dev; | |
1567 | status = usb_submit_urb(urb, GFP_KERNEL); | |
1568 | } | |
1569 | tport->tp_read_urb_state = TI_READ_URB_RUNNING; | |
1570 | ||
1571 | spin_unlock_irqrestore(&tport->tp_lock, flags); | |
1572 | ||
1573 | return status; | |
1574 | } | |
1575 | ||
1576 | ||
1577 | static int ti_command_out_sync(struct ti_device *tdev, __u8 command, | |
1578 | __u16 moduleid, __u16 value, __u8 *data, int size) | |
1579 | { | |
1580 | int status; | |
1581 | ||
1582 | status = usb_control_msg(tdev->td_serial->dev, | |
1583 | usb_sndctrlpipe(tdev->td_serial->dev, 0), command, | |
1584 | (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), | |
1585 | value, moduleid, data, size, 1000); | |
1586 | ||
1587 | if (status == size) | |
1588 | status = 0; | |
1589 | ||
1590 | if (status > 0) | |
1591 | status = -ECOMM; | |
1592 | ||
1593 | return status; | |
1594 | } | |
1595 | ||
1596 | ||
1597 | static int ti_command_in_sync(struct ti_device *tdev, __u8 command, | |
1598 | __u16 moduleid, __u16 value, __u8 *data, int size) | |
1599 | { | |
1600 | int status; | |
1601 | ||
1602 | status = usb_control_msg(tdev->td_serial->dev, | |
1603 | usb_rcvctrlpipe(tdev->td_serial->dev, 0), command, | |
1604 | (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), | |
1605 | value, moduleid, data, size, 1000); | |
1606 | ||
1607 | if (status == size) | |
1608 | status = 0; | |
1609 | ||
1610 | if (status > 0) | |
1611 | status = -ECOMM; | |
1612 | ||
1613 | return status; | |
1614 | } | |
1615 | ||
1616 | ||
1617 | static int ti_write_byte(struct ti_device *tdev, unsigned long addr, | |
1618 | __u8 mask, __u8 byte) | |
1619 | { | |
1620 | int status; | |
1621 | unsigned int size; | |
1622 | struct ti_write_data_bytes *data; | |
1623 | struct device *dev = &tdev->td_serial->dev->dev; | |
1624 | ||
1625 | dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte); | |
1626 | ||
1627 | size = sizeof(struct ti_write_data_bytes) + 2; | |
1628 | data = kmalloc(size, GFP_KERNEL); | |
1629 | if (!data) { | |
1630 | dev_err(dev, "%s - out of memory\n", __FUNCTION__); | |
1631 | return -ENOMEM; | |
1632 | } | |
1633 | ||
1634 | data->bAddrType = TI_RW_DATA_ADDR_XDATA; | |
1635 | data->bDataType = TI_RW_DATA_BYTE; | |
1636 | data->bDataCounter = 1; | |
1637 | data->wBaseAddrHi = cpu_to_be16(addr>>16); | |
1638 | data->wBaseAddrLo = cpu_to_be16(addr); | |
1639 | data->bData[0] = mask; | |
1640 | data->bData[1] = byte; | |
1641 | ||
1642 | status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0, | |
1643 | (__u8 *)data, size); | |
1644 | ||
1645 | if (status < 0) | |
1646 | dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status); | |
1647 | ||
1648 | kfree(data); | |
1649 | ||
1650 | return status; | |
1651 | } | |
1652 | ||
1653 | ||
1654 | static int ti_download_firmware(struct ti_device *tdev, | |
1655 | unsigned char *firmware, unsigned int firmware_size) | |
1656 | { | |
1657 | int status = 0; | |
1658 | int buffer_size; | |
1659 | int pos; | |
1660 | int len; | |
1661 | int done; | |
1662 | __u8 cs = 0; | |
1663 | __u8 *buffer; | |
1664 | struct usb_device *dev = tdev->td_serial->dev; | |
1665 | struct ti_firmware_header *header; | |
1666 | unsigned int pipe = usb_sndbulkpipe(dev, | |
1667 | tdev->td_serial->port[0]->bulk_out_endpointAddress); | |
1668 | ||
1669 | ||
1670 | buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); | |
1671 | buffer = kmalloc(buffer_size, GFP_KERNEL); | |
1672 | if (!buffer) { | |
1673 | dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); | |
1674 | return -ENOMEM; | |
1675 | } | |
1676 | ||
1677 | memcpy(buffer, firmware, firmware_size); | |
1678 | memset(buffer+firmware_size, 0xff, buffer_size-firmware_size); | |
1679 | ||
1680 | for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++) | |
1681 | cs = (__u8)(cs + buffer[pos]); | |
1682 | ||
1683 | header = (struct ti_firmware_header *)buffer; | |
1684 | header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header))); | |
1685 | header->bCheckSum = cs; | |
1686 | ||
1687 | dbg("%s - downloading firmware", __FUNCTION__); | |
1688 | for (pos = 0; pos < buffer_size; pos += done) { | |
1689 | len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); | |
1690 | status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000); | |
1691 | if (status) | |
1692 | break; | |
1693 | } | |
1694 | ||
1695 | kfree(buffer); | |
1696 | ||
1697 | if (status) { | |
1698 | dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status); | |
1699 | return status; | |
1700 | } | |
1701 | ||
1702 | dbg("%s - download successful", __FUNCTION__); | |
1703 | ||
1704 | return 0; | |
1705 | } | |
1706 | ||
1707 | ||
1708 | /* Circular Buffer Functions */ | |
1709 | ||
1710 | /* | |
1711 | * ti_buf_alloc | |
1712 | * | |
1713 | * Allocate a circular buffer and all associated memory. | |
1714 | */ | |
1715 | ||
1716 | static struct circ_buf *ti_buf_alloc(void) | |
1717 | { | |
1718 | struct circ_buf *cb; | |
1719 | ||
1720 | cb = (struct circ_buf *)kmalloc(sizeof(struct circ_buf), GFP_KERNEL); | |
1721 | if (cb == NULL) | |
1722 | return NULL; | |
1723 | ||
1724 | cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL); | |
1725 | if (cb->buf == NULL) { | |
1726 | kfree(cb); | |
1727 | return NULL; | |
1728 | } | |
1729 | ||
1730 | ti_buf_clear(cb); | |
1731 | ||
1732 | return cb; | |
1733 | } | |
1734 | ||
1735 | ||
1736 | /* | |
1737 | * ti_buf_free | |
1738 | * | |
1739 | * Free the buffer and all associated memory. | |
1740 | */ | |
1741 | ||
1742 | static void ti_buf_free(struct circ_buf *cb) | |
1743 | { | |
1744 | kfree(cb->buf); | |
1745 | kfree(cb); | |
1746 | } | |
1747 | ||
1748 | ||
1749 | /* | |
1750 | * ti_buf_clear | |
1751 | * | |
1752 | * Clear out all data in the circular buffer. | |
1753 | */ | |
1754 | ||
1755 | static void ti_buf_clear(struct circ_buf *cb) | |
1756 | { | |
1757 | cb->head = cb->tail = 0; | |
1758 | } | |
1759 | ||
1760 | ||
1761 | /* | |
1762 | * ti_buf_data_avail | |
1763 | * | |
1764 | * Return the number of bytes of data available in the circular | |
1765 | * buffer. | |
1766 | */ | |
1767 | ||
1768 | static int ti_buf_data_avail(struct circ_buf *cb) | |
1769 | { | |
1770 | return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE); | |
1771 | } | |
1772 | ||
1773 | ||
1774 | /* | |
1775 | * ti_buf_space_avail | |
1776 | * | |
1777 | * Return the number of bytes of space available in the circular | |
1778 | * buffer. | |
1779 | */ | |
1780 | ||
1781 | static int ti_buf_space_avail(struct circ_buf *cb) | |
1782 | { | |
1783 | return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE); | |
1784 | } | |
1785 | ||
1786 | ||
1787 | /* | |
1788 | * ti_buf_put | |
1789 | * | |
1790 | * Copy data data from a user buffer and put it into the circular buffer. | |
1791 | * Restrict to the amount of space available. | |
1792 | * | |
1793 | * Return the number of bytes copied. | |
1794 | */ | |
1795 | ||
1796 | static int ti_buf_put(struct circ_buf *cb, const char *buf, int count) | |
1797 | { | |
1798 | int c, ret = 0; | |
1799 | ||
1800 | while (1) { | |
1801 | c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE); | |
1802 | if (count < c) | |
1803 | c = count; | |
1804 | if (c <= 0) | |
1805 | break; | |
1806 | memcpy(cb->buf + cb->head, buf, c); | |
1807 | cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1); | |
1808 | buf += c; | |
1809 | count -= c; | |
1810 | ret += c; | |
1811 | } | |
1812 | ||
1813 | return ret; | |
1814 | } | |
1815 | ||
1816 | ||
1817 | /* | |
1818 | * ti_buf_get | |
1819 | * | |
1820 | * Get data from the circular buffer and copy to the given buffer. | |
1821 | * Restrict to the amount of data available. | |
1822 | * | |
1823 | * Return the number of bytes copied. | |
1824 | */ | |
1825 | ||
1826 | static int ti_buf_get(struct circ_buf *cb, char *buf, int count) | |
1827 | { | |
1828 | int c, ret = 0; | |
1829 | ||
1830 | while (1) { | |
1831 | c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE); | |
1832 | if (count < c) | |
1833 | c = count; | |
1834 | if (c <= 0) | |
1835 | break; | |
1836 | memcpy(buf, cb->buf + cb->tail, c); | |
1837 | cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1); | |
1838 | buf += c; | |
1839 | count -= c; | |
1840 | ret += c; | |
1841 | } | |
1842 | ||
1843 | return ret; | |
1844 | } |