Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* Driver for USB Mass Storage compliant devices |
1da177e4 LT |
2 | * |
3 | * Current development and maintenance by: | |
4 | * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net) | |
5 | * | |
6 | * Developed with the assistance of: | |
7 | * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) | |
e6e244b6 | 8 | * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu) |
1da177e4 LT |
9 | * |
10 | * Initial work by: | |
11 | * (c) 1999 Michael Gee (michael@linuxspecific.com) | |
12 | * | |
13 | * usb_device_id support by Adam J. Richter (adam@yggdrasil.com): | |
14 | * (c) 2000 Yggdrasil Computing, Inc. | |
15 | * | |
16 | * This driver is based on the 'USB Mass Storage Class' document. This | |
17 | * describes in detail the protocol used to communicate with such | |
18 | * devices. Clearly, the designers had SCSI and ATAPI commands in | |
19 | * mind when they created this document. The commands are all very | |
20 | * similar to commands in the SCSI-II and ATAPI specifications. | |
21 | * | |
22 | * It is important to note that in a number of cases this class | |
23 | * exhibits class-specific exemptions from the USB specification. | |
24 | * Notably the usage of NAK, STALL and ACK differs from the norm, in | |
25 | * that they are used to communicate wait, failed and OK on commands. | |
26 | * | |
27 | * Also, for certain devices, the interrupt endpoint is used to convey | |
28 | * status of a command. | |
29 | * | |
30 | * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more | |
31 | * information about this driver. | |
32 | * | |
33 | * This program is free software; you can redistribute it and/or modify it | |
34 | * under the terms of the GNU General Public License as published by the | |
35 | * Free Software Foundation; either version 2, or (at your option) any | |
36 | * later version. | |
37 | * | |
38 | * This program is distributed in the hope that it will be useful, but | |
39 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
40 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
41 | * General Public License for more details. | |
42 | * | |
43 | * You should have received a copy of the GNU General Public License along | |
44 | * with this program; if not, write to the Free Software Foundation, Inc., | |
45 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
46 | */ | |
47 | ||
9eb66f71 MW |
48 | #ifdef CONFIG_USB_STORAGE_DEBUG |
49 | #define DEBUG | |
50 | #endif | |
51 | ||
1da177e4 LT |
52 | #include <linux/sched.h> |
53 | #include <linux/errno.h> | |
7dfb7103 | 54 | #include <linux/freezer.h> |
1da177e4 | 55 | #include <linux/module.h> |
1da177e4 | 56 | #include <linux/slab.h> |
3f13e66e | 57 | #include <linux/kthread.h> |
4186ecf8 | 58 | #include <linux/mutex.h> |
00f8b0c1 | 59 | #include <linux/utsname.h> |
1da177e4 LT |
60 | |
61 | #include <scsi/scsi.h> | |
62 | #include <scsi/scsi_cmnd.h> | |
63 | #include <scsi/scsi_device.h> | |
64 | ||
65 | #include "usb.h" | |
66 | #include "scsiglue.h" | |
67 | #include "transport.h" | |
68 | #include "protocol.h" | |
69 | #include "debug.h" | |
70 | #include "initializers.h" | |
71 | ||
32fe5e39 | 72 | #include "sierra_ms.h" |
281b064f | 73 | #include "option_ms.h" |
1da177e4 | 74 | |
5bfd5b5d HG |
75 | #if IS_ENABLED(CONFIG_USB_UAS) |
76 | #include "uas-detect.h" | |
77 | #endif | |
78 | ||
1da177e4 LT |
79 | /* Some informational data */ |
80 | MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); | |
81 | MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); | |
82 | MODULE_LICENSE("GPL"); | |
83 | ||
a4a47bc0 | 84 | static unsigned int delay_use = 1; |
1da177e4 LT |
85 | module_param(delay_use, uint, S_IRUGO | S_IWUSR); |
86 | MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); | |
87 | ||
c838ea46 AS |
88 | static char quirks[128]; |
89 | module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR); | |
d4f373e5 AS |
90 | MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); |
91 | ||
1da177e4 | 92 | |
a00828e9 PZ |
93 | /* |
94 | * The entries in this table correspond, line for line, | |
e6e244b6 | 95 | * with the entries in usb_storage_usb_ids[], defined in usual-tables.c. |
1da177e4 | 96 | */ |
1da177e4 LT |
97 | |
98 | /* The vendor name should be kept at eight characters or less, and | |
99 | * the product name should be kept at 16 characters or less. If a device | |
100 | * has the US_FL_FIX_INQUIRY flag, then the vendor and product names | |
101 | * normally generated by a device thorugh the INQUIRY response will be | |
102 | * taken from this list, and this is the reason for the above size | |
103 | * restriction. However, if the flag is not present, then you | |
104 | * are free to use as many characters as you like. | |
105 | */ | |
106 | ||
1da177e4 LT |
107 | #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ |
108 | vendor_name, product_name, use_protocol, use_transport, \ | |
109 | init_function, Flags) \ | |
110 | { \ | |
111 | .vendorName = vendor_name, \ | |
112 | .productName = product_name, \ | |
113 | .useProtocol = use_protocol, \ | |
114 | .useTransport = use_transport, \ | |
115 | .initFunction = init_function, \ | |
a00828e9 PZ |
116 | } |
117 | ||
25ff1c31 AS |
118 | #define COMPLIANT_DEV UNUSUAL_DEV |
119 | ||
f61870ee | 120 | #define USUAL_DEV(use_protocol, use_transport) \ |
a00828e9 PZ |
121 | { \ |
122 | .useProtocol = use_protocol, \ | |
123 | .useTransport = use_transport, \ | |
1da177e4 LT |
124 | } |
125 | ||
07c7be3d | 126 | #define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \ |
127 | vendor_name, product_name, use_protocol, use_transport, \ | |
128 | init_function, Flags) \ | |
129 | { \ | |
130 | .vendorName = vendor_name, \ | |
131 | .productName = product_name, \ | |
132 | .useProtocol = use_protocol, \ | |
133 | .useTransport = use_transport, \ | |
134 | .initFunction = init_function, \ | |
135 | } | |
136 | ||
1da177e4 | 137 | static struct us_unusual_dev us_unusual_dev_list[] = { |
a1631062 | 138 | # include "unusual_devs.h" |
e6e244b6 | 139 | { } /* Terminating entry */ |
1da177e4 LT |
140 | }; |
141 | ||
fd7ff36d | 142 | static struct us_unusual_dev for_dynamic_ids = |
f61870ee | 143 | USUAL_DEV(USB_SC_SCSI, USB_PR_BULK); |
fd7ff36d | 144 | |
e6e244b6 AS |
145 | #undef UNUSUAL_DEV |
146 | #undef COMPLIANT_DEV | |
147 | #undef USUAL_DEV | |
07c7be3d | 148 | #undef UNUSUAL_VENDOR_INTF |
e6e244b6 | 149 | |
c825bab0 ML |
150 | #ifdef CONFIG_LOCKDEP |
151 | ||
152 | static struct lock_class_key us_interface_key[USB_MAXINTERFACES]; | |
153 | ||
154 | static void us_set_lock_class(struct mutex *mutex, | |
155 | struct usb_interface *intf) | |
156 | { | |
157 | struct usb_device *udev = interface_to_usbdev(intf); | |
158 | struct usb_host_config *config = udev->actconfig; | |
159 | int i; | |
160 | ||
161 | for (i = 0; i < config->desc.bNumInterfaces; i++) { | |
162 | if (config->interface[i] == intf) | |
163 | break; | |
164 | } | |
165 | ||
166 | BUG_ON(i == config->desc.bNumInterfaces); | |
167 | ||
168 | lockdep_set_class(mutex, &us_interface_key[i]); | |
169 | } | |
170 | ||
171 | #else | |
172 | ||
173 | static void us_set_lock_class(struct mutex *mutex, | |
174 | struct usb_interface *intf) | |
175 | { | |
176 | } | |
177 | ||
178 | #endif | |
ce2596df AS |
179 | |
180 | #ifdef CONFIG_PM /* Minimal support for suspend and resume */ | |
181 | ||
e6e244b6 | 182 | int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) |
ce2596df AS |
183 | { |
184 | struct us_data *us = usb_get_intfdata(iface); | |
185 | ||
186 | /* Wait until no command is running */ | |
4186ecf8 | 187 | mutex_lock(&us->dev_mutex); |
ce2596df | 188 | |
7931e1c6 MD |
189 | if (us->suspend_resume_hook) |
190 | (us->suspend_resume_hook)(us, US_SUSPEND); | |
ce2596df | 191 | |
d526875d GKH |
192 | /* When runtime PM is working, we'll set a flag to indicate |
193 | * whether we should autoresume when a SCSI request arrives. */ | |
194 | ||
4186ecf8 | 195 | mutex_unlock(&us->dev_mutex); |
ce2596df AS |
196 | return 0; |
197 | } | |
e6e244b6 | 198 | EXPORT_SYMBOL_GPL(usb_stor_suspend); |
ce2596df | 199 | |
e6e244b6 | 200 | int usb_stor_resume(struct usb_interface *iface) |
ce2596df AS |
201 | { |
202 | struct us_data *us = usb_get_intfdata(iface); | |
203 | ||
d526875d | 204 | mutex_lock(&us->dev_mutex); |
8dfe4b14 | 205 | |
7931e1c6 MD |
206 | if (us->suspend_resume_hook) |
207 | (us->suspend_resume_hook)(us, US_RESUME); | |
ce2596df | 208 | |
d526875d | 209 | mutex_unlock(&us->dev_mutex); |
ce2596df AS |
210 | return 0; |
211 | } | |
e6e244b6 | 212 | EXPORT_SYMBOL_GPL(usb_stor_resume); |
ce2596df | 213 | |
e6e244b6 | 214 | int usb_stor_reset_resume(struct usb_interface *iface) |
f07600cf AS |
215 | { |
216 | struct us_data *us = usb_get_intfdata(iface); | |
217 | ||
f07600cf AS |
218 | /* Report the reset to the SCSI core */ |
219 | usb_stor_report_bus_reset(us); | |
220 | ||
221 | /* FIXME: Notify the subdrivers that they need to reinitialize | |
222 | * the device */ | |
223 | return 0; | |
224 | } | |
e6e244b6 | 225 | EXPORT_SYMBOL_GPL(usb_stor_reset_resume); |
f07600cf | 226 | |
ce2596df | 227 | #endif /* CONFIG_PM */ |
1da177e4 | 228 | |
47104b0d AS |
229 | /* |
230 | * The next two routines get called just before and just after | |
231 | * a USB port reset, whether from this driver or a different one. | |
232 | */ | |
233 | ||
e6e244b6 | 234 | int usb_stor_pre_reset(struct usb_interface *iface) |
47104b0d AS |
235 | { |
236 | struct us_data *us = usb_get_intfdata(iface); | |
237 | ||
47104b0d AS |
238 | /* Make sure no command runs during the reset */ |
239 | mutex_lock(&us->dev_mutex); | |
f07600cf | 240 | return 0; |
47104b0d | 241 | } |
e6e244b6 | 242 | EXPORT_SYMBOL_GPL(usb_stor_pre_reset); |
47104b0d | 243 | |
e6e244b6 | 244 | int usb_stor_post_reset(struct usb_interface *iface) |
47104b0d AS |
245 | { |
246 | struct us_data *us = usb_get_intfdata(iface); | |
247 | ||
47104b0d | 248 | /* Report the reset to the SCSI core */ |
47104b0d | 249 | usb_stor_report_bus_reset(us); |
47104b0d AS |
250 | |
251 | /* FIXME: Notify the subdrivers that they need to reinitialize | |
252 | * the device */ | |
0458d5b4 | 253 | |
f07600cf AS |
254 | mutex_unlock(&us->dev_mutex); |
255 | return 0; | |
47104b0d | 256 | } |
e6e244b6 | 257 | EXPORT_SYMBOL_GPL(usb_stor_post_reset); |
47104b0d | 258 | |
1da177e4 LT |
259 | /* |
260 | * fill_inquiry_response takes an unsigned char array (which must | |
261 | * be at least 36 characters) and populates the vendor name, | |
262 | * product name, and revision fields. Then the array is copied | |
263 | * into the SCSI command's response buffer (oddly enough | |
264 | * called request_buffer). data_len contains the length of the | |
265 | * data array, which again must be at least 36. | |
266 | */ | |
267 | ||
268 | void fill_inquiry_response(struct us_data *us, unsigned char *data, | |
269 | unsigned int data_len) | |
270 | { | |
a1631062 | 271 | if (data_len < 36) /* You lose. */ |
1da177e4 LT |
272 | return; |
273 | ||
f3f6faa9 | 274 | memset(data+8, ' ', 28); |
db2c8624 | 275 | if (data[0]&0x20) { /* USB device currently not connected. Return |
1da177e4 LT |
276 | peripheral qualifier 001b ("...however, the |
277 | physical device is not currently connected | |
278 | to this logical unit") and leave vendor and | |
279 | product identification empty. ("If the target | |
280 | does store some of the INQUIRY data on the | |
a1631062 | 281 | device, it may return zeros or ASCII spaces |
1da177e4 LT |
282 | (20h) in those fields until the data is |
283 | available from the device."). */ | |
1da177e4 LT |
284 | } else { |
285 | u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice); | |
f3f6faa9 AS |
286 | int n; |
287 | ||
288 | n = strlen(us->unusual_dev->vendorName); | |
289 | memcpy(data+8, us->unusual_dev->vendorName, min(8, n)); | |
290 | n = strlen(us->unusual_dev->productName); | |
291 | memcpy(data+16, us->unusual_dev->productName, min(16, n)); | |
292 | ||
1da177e4 LT |
293 | data[32] = 0x30 + ((bcdDevice>>12) & 0x0F); |
294 | data[33] = 0x30 + ((bcdDevice>>8) & 0x0F); | |
295 | data[34] = 0x30 + ((bcdDevice>>4) & 0x0F); | |
296 | data[35] = 0x30 + ((bcdDevice) & 0x0F); | |
297 | } | |
298 | ||
299 | usb_stor_set_xfer_buf(data, data_len, us->srb); | |
300 | } | |
e6e244b6 | 301 | EXPORT_SYMBOL_GPL(fill_inquiry_response); |
1da177e4 LT |
302 | |
303 | static int usb_stor_control_thread(void * __us) | |
304 | { | |
305 | struct us_data *us = (struct us_data *)__us; | |
306 | struct Scsi_Host *host = us_to_host(us); | |
307 | ||
db2c8624 | 308 | for (;;) { |
191648d0 | 309 | usb_stor_dbg(us, "*** thread sleeping\n"); |
7119e3c3 | 310 | if (wait_for_completion_interruptible(&us->cmnd_ready)) |
1da177e4 | 311 | break; |
7119e3c3 | 312 | |
191648d0 | 313 | usb_stor_dbg(us, "*** thread awakened\n"); |
1da177e4 LT |
314 | |
315 | /* lock the device pointers */ | |
4186ecf8 | 316 | mutex_lock(&(us->dev_mutex)); |
1da177e4 | 317 | |
543f7810 AS |
318 | /* lock access to the state */ |
319 | scsi_lock(host); | |
320 | ||
321 | /* When we are called with no command pending, we're done */ | |
322 | if (us->srb == NULL) { | |
323 | scsi_unlock(host); | |
4186ecf8 | 324 | mutex_unlock(&us->dev_mutex); |
191648d0 | 325 | usb_stor_dbg(us, "-- exiting\n"); |
1da177e4 LT |
326 | break; |
327 | } | |
328 | ||
1da177e4 | 329 | /* has the command timed out *already* ? */ |
7e4d6c38 | 330 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
1da177e4 LT |
331 | us->srb->result = DID_ABORT << 16; |
332 | goto SkipForAbort; | |
333 | } | |
334 | ||
335 | scsi_unlock(host); | |
336 | ||
a1631062 | 337 | /* reject the command if the direction indicator |
1da177e4 LT |
338 | * is UNKNOWN |
339 | */ | |
340 | if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { | |
191648d0 | 341 | usb_stor_dbg(us, "UNKNOWN data direction\n"); |
1da177e4 LT |
342 | us->srb->result = DID_ERROR << 16; |
343 | } | |
344 | ||
345 | /* reject if target != 0 or if LUN is higher than | |
346 | * the maximum known LUN | |
347 | */ | |
a1631062 | 348 | else if (us->srb->device->id && |
7e4d6c38 | 349 | !(us->fflags & US_FL_SCM_MULT_TARG)) { |
9cb78c16 HR |
350 | usb_stor_dbg(us, "Bad target number (%d:%llu)\n", |
351 | us->srb->device->id, | |
352 | us->srb->device->lun); | |
1da177e4 LT |
353 | us->srb->result = DID_BAD_TARGET << 16; |
354 | } | |
355 | ||
356 | else if (us->srb->device->lun > us->max_lun) { | |
9cb78c16 HR |
357 | usb_stor_dbg(us, "Bad LUN (%d:%llu)\n", |
358 | us->srb->device->id, | |
359 | us->srb->device->lun); | |
1da177e4 LT |
360 | us->srb->result = DID_BAD_TARGET << 16; |
361 | } | |
362 | ||
a1631062 | 363 | /* Handle those devices which need us to fake |
1da177e4 LT |
364 | * their inquiry data */ |
365 | else if ((us->srb->cmnd[0] == INQUIRY) && | |
7e4d6c38 | 366 | (us->fflags & US_FL_FIX_INQUIRY)) { |
1da177e4 LT |
367 | unsigned char data_ptr[36] = { |
368 | 0x00, 0x80, 0x02, 0x02, | |
369 | 0x1F, 0x00, 0x00, 0x00}; | |
370 | ||
191648d0 | 371 | usb_stor_dbg(us, "Faking INQUIRY command\n"); |
1da177e4 LT |
372 | fill_inquiry_response(us, data_ptr, 36); |
373 | us->srb->result = SAM_STAT_GOOD; | |
374 | } | |
375 | ||
376 | /* we've got a command, let's do it! */ | |
377 | else { | |
191648d0 | 378 | US_DEBUG(usb_stor_show_command(us, us->srb)); |
1da177e4 | 379 | us->proto_handler(us->srb, us); |
f283925f | 380 | usb_mark_last_busy(us->pusb_dev); |
1da177e4 LT |
381 | } |
382 | ||
383 | /* lock access to the state */ | |
384 | scsi_lock(host); | |
385 | ||
386 | /* indicate that the command is done */ | |
543f7810 | 387 | if (us->srb->result != DID_ABORT << 16) { |
191648d0 JP |
388 | usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", |
389 | us->srb->result); | |
1da177e4 LT |
390 | us->srb->scsi_done(us->srb); |
391 | } else { | |
392 | SkipForAbort: | |
191648d0 | 393 | usb_stor_dbg(us, "scsi command aborted\n"); |
1da177e4 LT |
394 | } |
395 | ||
396 | /* If an abort request was received we need to signal that | |
397 | * the abort has finished. The proper test for this is | |
398 | * the TIMED_OUT flag, not srb->result == DID_ABORT, because | |
226173ed MD |
399 | * the timeout might have occurred after the command had |
400 | * already completed with a different result code. */ | |
7e4d6c38 | 401 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
1da177e4 LT |
402 | complete(&(us->notify)); |
403 | ||
226173ed | 404 | /* Allow USB transfers to resume */ |
7e4d6c38 AS |
405 | clear_bit(US_FLIDX_ABORTING, &us->dflags); |
406 | clear_bit(US_FLIDX_TIMED_OUT, &us->dflags); | |
226173ed MD |
407 | } |
408 | ||
1da177e4 LT |
409 | /* finished working on this command */ |
410 | us->srb = NULL; | |
411 | scsi_unlock(host); | |
412 | ||
413 | /* unlock the device pointers */ | |
4186ecf8 | 414 | mutex_unlock(&us->dev_mutex); |
1da177e4 LT |
415 | } /* for (;;) */ |
416 | ||
ed76cacb AS |
417 | /* Wait until we are told to stop */ |
418 | for (;;) { | |
419 | set_current_state(TASK_INTERRUPTIBLE); | |
420 | if (kthread_should_stop()) | |
421 | break; | |
422 | schedule(); | |
423 | } | |
424 | __set_current_state(TASK_RUNNING); | |
425 | return 0; | |
a1631062 | 426 | } |
1da177e4 LT |
427 | |
428 | /*********************************************************************** | |
429 | * Device probing and disconnecting | |
430 | ***********************************************************************/ | |
431 | ||
432 | /* Associate our private data with the USB device */ | |
433 | static int associate_dev(struct us_data *us, struct usb_interface *intf) | |
434 | { | |
1da177e4 LT |
435 | /* Fill in the device-related fields */ |
436 | us->pusb_dev = interface_to_usbdev(intf); | |
437 | us->pusb_intf = intf; | |
438 | us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; | |
191648d0 JP |
439 | usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", |
440 | le16_to_cpu(us->pusb_dev->descriptor.idVendor), | |
441 | le16_to_cpu(us->pusb_dev->descriptor.idProduct), | |
442 | le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); | |
443 | usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n", | |
444 | intf->cur_altsetting->desc.bInterfaceSubClass, | |
445 | intf->cur_altsetting->desc.bInterfaceProtocol); | |
1da177e4 LT |
446 | |
447 | /* Store our private data in the interface */ | |
448 | usb_set_intfdata(intf, us); | |
449 | ||
0ede76fc AS |
450 | /* Allocate the control/setup and DMA-mapped buffers */ |
451 | us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL); | |
191648d0 | 452 | if (!us->cr) |
1da177e4 | 453 | return -ENOMEM; |
1da177e4 | 454 | |
997ea58e | 455 | us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, |
1da177e4 LT |
456 | GFP_KERNEL, &us->iobuf_dma); |
457 | if (!us->iobuf) { | |
191648d0 | 458 | usb_stor_dbg(us, "I/O buffer allocation failed\n"); |
1da177e4 LT |
459 | return -ENOMEM; |
460 | } | |
461 | return 0; | |
462 | } | |
463 | ||
c838ea46 AS |
464 | /* Works only for digits and letters, but small and fast */ |
465 | #define TOLOWER(x) ((x) | 0x20) | |
466 | ||
d4f373e5 | 467 | /* Adjust device flags based on the "quirks=" module parameter */ |
d24d481b | 468 | void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) |
d4f373e5 | 469 | { |
c838ea46 | 470 | char *p; |
d24d481b HG |
471 | u16 vid = le16_to_cpu(udev->descriptor.idVendor); |
472 | u16 pid = le16_to_cpu(udev->descriptor.idProduct); | |
c838ea46 | 473 | unsigned f = 0; |
a91b593e | 474 | unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | |
d24d481b | 475 | US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS | |
c838ea46 | 476 | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | |
d4f373e5 | 477 | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | |
c838ea46 | 478 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | |
5116901d | 479 | US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | |
21c13a4f | 480 | US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | |
59307852 HG |
481 | US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | |
482 | US_FL_NO_ATA_1X); | |
c838ea46 AS |
483 | |
484 | p = quirks; | |
485 | while (*p) { | |
486 | /* Each entry consists of VID:PID:flags */ | |
487 | if (vid == simple_strtoul(p, &p, 16) && | |
488 | *p == ':' && | |
489 | pid == simple_strtoul(p+1, &p, 16) && | |
490 | *p == ':') | |
d4f373e5 | 491 | break; |
c838ea46 AS |
492 | |
493 | /* Move forward to the next entry */ | |
494 | while (*p) { | |
495 | if (*p++ == ',') | |
496 | break; | |
d4f373e5 AS |
497 | } |
498 | } | |
c838ea46 AS |
499 | if (!*p) /* No match */ |
500 | return; | |
501 | ||
502 | /* Collect the flags */ | |
503 | while (*++p && *p != ',') { | |
504 | switch (TOLOWER(*p)) { | |
505 | case 'a': | |
506 | f |= US_FL_SANE_SENSE; | |
507 | break; | |
a0bb1081 AS |
508 | case 'b': |
509 | f |= US_FL_BAD_SENSE; | |
510 | break; | |
c838ea46 AS |
511 | case 'c': |
512 | f |= US_FL_FIX_CAPACITY; | |
513 | break; | |
5116901d KR |
514 | case 'd': |
515 | f |= US_FL_NO_READ_DISC_INFO; | |
516 | break; | |
517 | case 'e': | |
518 | f |= US_FL_NO_READ_CAPACITY_16; | |
519 | break; | |
c838ea46 AS |
520 | case 'h': |
521 | f |= US_FL_CAPACITY_HEURISTICS; | |
522 | break; | |
523 | case 'i': | |
524 | f |= US_FL_IGNORE_DEVICE; | |
525 | break; | |
526 | case 'l': | |
527 | f |= US_FL_NOT_LOCKABLE; | |
528 | break; | |
529 | case 'm': | |
530 | f |= US_FL_MAX_SECTORS_64; | |
531 | break; | |
21c13a4f AS |
532 | case 'n': |
533 | f |= US_FL_INITIAL_READ10; | |
534 | break; | |
c838ea46 AS |
535 | case 'o': |
536 | f |= US_FL_CAPACITY_OK; | |
537 | break; | |
eaa05dfc NJ |
538 | case 'p': |
539 | f |= US_FL_WRITE_CACHE; | |
540 | break; | |
c838ea46 AS |
541 | case 'r': |
542 | f |= US_FL_IGNORE_RESIDUE; | |
543 | break; | |
544 | case 's': | |
545 | f |= US_FL_SINGLE_LUN; | |
546 | break; | |
59307852 HG |
547 | case 't': |
548 | f |= US_FL_NO_ATA_1X; | |
549 | break; | |
d24d481b HG |
550 | case 'u': |
551 | f |= US_FL_IGNORE_UAS; | |
552 | break; | |
c838ea46 AS |
553 | case 'w': |
554 | f |= US_FL_NO_WP_DETECT; | |
555 | break; | |
556 | /* Ignore unrecognized flag characters */ | |
557 | } | |
558 | } | |
d24d481b | 559 | *fflags = (*fflags & ~mask) | f; |
d4f373e5 | 560 | } |
d24d481b | 561 | EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks); |
d4f373e5 | 562 | |
1da177e4 | 563 | /* Get the unusual_devs entries and the string descriptors */ |
e6e244b6 AS |
564 | static int get_device_info(struct us_data *us, const struct usb_device_id *id, |
565 | struct us_unusual_dev *unusual_dev) | |
1da177e4 LT |
566 | { |
567 | struct usb_device *dev = us->pusb_dev; | |
568 | struct usb_interface_descriptor *idesc = | |
569 | &us->pusb_intf->cur_altsetting->desc; | |
cbd3af54 | 570 | struct device *pdev = &us->pusb_intf->dev; |
1da177e4 LT |
571 | |
572 | /* Store the entries */ | |
573 | us->unusual_dev = unusual_dev; | |
8fa7fd74 | 574 | us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ? |
1da177e4 LT |
575 | idesc->bInterfaceSubClass : |
576 | unusual_dev->useProtocol; | |
8fa7fd74 | 577 | us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ? |
1da177e4 LT |
578 | idesc->bInterfaceProtocol : |
579 | unusual_dev->useTransport; | |
f61870ee | 580 | us->fflags = id->driver_info; |
d24d481b | 581 | usb_stor_adjust_quirks(us->pusb_dev, &us->fflags); |
1da177e4 | 582 | |
7e4d6c38 | 583 | if (us->fflags & US_FL_IGNORE_DEVICE) { |
cbd3af54 | 584 | dev_info(pdev, "device ignored\n"); |
3c332422 DD |
585 | return -ENODEV; |
586 | } | |
587 | ||
1da177e4 LT |
588 | /* |
589 | * This flag is only needed when we're in high-speed, so let's | |
590 | * disable it if we're in full-speed | |
591 | */ | |
592 | if (dev->speed != USB_SPEED_HIGH) | |
7e4d6c38 | 593 | us->fflags &= ~US_FL_GO_SLOW; |
1da177e4 | 594 | |
39f2f080 FC |
595 | if (us->fflags) |
596 | dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n", | |
597 | le16_to_cpu(dev->descriptor.idVendor), | |
598 | le16_to_cpu(dev->descriptor.idProduct), | |
599 | us->fflags); | |
600 | ||
1da177e4 LT |
601 | /* Log a message if a non-generic unusual_dev entry contains an |
602 | * unnecessary subclass or protocol override. This may stimulate | |
603 | * reports from users that will help us remove unneeded entries | |
604 | * from the unusual_devs.h table. | |
605 | */ | |
606 | if (id->idVendor || id->idProduct) { | |
4c4c9432 | 607 | static const char *msgs[3] = { |
1da177e4 LT |
608 | "an unneeded SubClass entry", |
609 | "an unneeded Protocol entry", | |
610 | "unneeded SubClass and Protocol entries"}; | |
611 | struct usb_device_descriptor *ddesc = &dev->descriptor; | |
612 | int msg = -1; | |
613 | ||
8fa7fd74 | 614 | if (unusual_dev->useProtocol != USB_SC_DEVICE && |
1da177e4 LT |
615 | us->subclass == idesc->bInterfaceSubClass) |
616 | msg += 1; | |
8fa7fd74 | 617 | if (unusual_dev->useTransport != USB_PR_DEVICE && |
1da177e4 LT |
618 | us->protocol == idesc->bInterfaceProtocol) |
619 | msg += 2; | |
7e4d6c38 | 620 | if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE)) |
cbd3af54 FC |
621 | dev_notice(pdev, "This device " |
622 | "(%04x,%04x,%04x S %02x P %02x)" | |
623 | " has %s in unusual_devs.h (kernel" | |
624 | " %s)\n" | |
625 | " Please send a copy of this message to " | |
626 | "<linux-usb@vger.kernel.org> and " | |
627 | "<usb-storage@lists.one-eyed-alien.net>\n", | |
628 | le16_to_cpu(ddesc->idVendor), | |
629 | le16_to_cpu(ddesc->idProduct), | |
630 | le16_to_cpu(ddesc->bcdDevice), | |
631 | idesc->bInterfaceSubClass, | |
632 | idesc->bInterfaceProtocol, | |
633 | msgs[msg], | |
634 | utsname()->release); | |
1da177e4 | 635 | } |
3c332422 DD |
636 | |
637 | return 0; | |
1da177e4 LT |
638 | } |
639 | ||
640 | /* Get the transport settings */ | |
e6e244b6 | 641 | static void get_transport(struct us_data *us) |
1da177e4 LT |
642 | { |
643 | switch (us->protocol) { | |
8fa7fd74 | 644 | case USB_PR_CB: |
1da177e4 LT |
645 | us->transport_name = "Control/Bulk"; |
646 | us->transport = usb_stor_CB_transport; | |
647 | us->transport_reset = usb_stor_CB_reset; | |
648 | us->max_lun = 7; | |
649 | break; | |
650 | ||
8fa7fd74 | 651 | case USB_PR_CBI: |
1da177e4 | 652 | us->transport_name = "Control/Bulk/Interrupt"; |
64648a9d | 653 | us->transport = usb_stor_CB_transport; |
1da177e4 LT |
654 | us->transport_reset = usb_stor_CB_reset; |
655 | us->max_lun = 7; | |
656 | break; | |
657 | ||
8fa7fd74 | 658 | case USB_PR_BULK: |
1da177e4 LT |
659 | us->transport_name = "Bulk"; |
660 | us->transport = usb_stor_Bulk_transport; | |
661 | us->transport_reset = usb_stor_Bulk_reset; | |
662 | break; | |
1da177e4 | 663 | } |
1da177e4 LT |
664 | } |
665 | ||
666 | /* Get the protocol settings */ | |
e6e244b6 | 667 | static void get_protocol(struct us_data *us) |
1da177e4 LT |
668 | { |
669 | switch (us->subclass) { | |
8fa7fd74 | 670 | case USB_SC_RBC: |
1da177e4 LT |
671 | us->protocol_name = "Reduced Block Commands (RBC)"; |
672 | us->proto_handler = usb_stor_transparent_scsi_command; | |
673 | break; | |
674 | ||
8fa7fd74 | 675 | case USB_SC_8020: |
1da177e4 | 676 | us->protocol_name = "8020i"; |
3dae5345 | 677 | us->proto_handler = usb_stor_pad12_command; |
1da177e4 LT |
678 | us->max_lun = 0; |
679 | break; | |
680 | ||
8fa7fd74 | 681 | case USB_SC_QIC: |
1da177e4 | 682 | us->protocol_name = "QIC-157"; |
3dae5345 | 683 | us->proto_handler = usb_stor_pad12_command; |
1da177e4 LT |
684 | us->max_lun = 0; |
685 | break; | |
686 | ||
8fa7fd74 | 687 | case USB_SC_8070: |
1da177e4 | 688 | us->protocol_name = "8070i"; |
3dae5345 | 689 | us->proto_handler = usb_stor_pad12_command; |
1da177e4 LT |
690 | us->max_lun = 0; |
691 | break; | |
692 | ||
8fa7fd74 | 693 | case USB_SC_SCSI: |
1da177e4 LT |
694 | us->protocol_name = "Transparent SCSI"; |
695 | us->proto_handler = usb_stor_transparent_scsi_command; | |
696 | break; | |
697 | ||
8fa7fd74 | 698 | case USB_SC_UFI: |
1da177e4 LT |
699 | us->protocol_name = "Uniform Floppy Interface (UFI)"; |
700 | us->proto_handler = usb_stor_ufi_command; | |
701 | break; | |
1da177e4 | 702 | } |
1da177e4 LT |
703 | } |
704 | ||
705 | /* Get the pipe settings */ | |
706 | static int get_pipes(struct us_data *us) | |
707 | { | |
708 | struct usb_host_interface *altsetting = | |
709 | us->pusb_intf->cur_altsetting; | |
710 | int i; | |
711 | struct usb_endpoint_descriptor *ep; | |
712 | struct usb_endpoint_descriptor *ep_in = NULL; | |
713 | struct usb_endpoint_descriptor *ep_out = NULL; | |
714 | struct usb_endpoint_descriptor *ep_int = NULL; | |
715 | ||
716 | /* | |
1096f780 | 717 | * Find the first endpoint of each type we need. |
1da177e4 | 718 | * We are expecting a minimum of 2 endpoints - in and out (bulk). |
1096f780 | 719 | * An optional interrupt-in is OK (necessary for CBI protocol). |
1da177e4 LT |
720 | * We will ignore any others. |
721 | */ | |
722 | for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { | |
723 | ep = &altsetting->endpoint[i].desc; | |
724 | ||
04720747 | 725 | if (usb_endpoint_xfer_bulk(ep)) { |
1096f780 AS |
726 | if (usb_endpoint_dir_in(ep)) { |
727 | if (!ep_in) | |
728 | ep_in = ep; | |
729 | } else { | |
730 | if (!ep_out) | |
731 | ep_out = ep; | |
732 | } | |
1da177e4 LT |
733 | } |
734 | ||
1096f780 AS |
735 | else if (usb_endpoint_is_int_in(ep)) { |
736 | if (!ep_int) | |
737 | ep_int = ep; | |
1da177e4 LT |
738 | } |
739 | } | |
740 | ||
8fa7fd74 | 741 | if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { |
191648d0 | 742 | usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n"); |
1da177e4 LT |
743 | return -EIO; |
744 | } | |
745 | ||
746 | /* Calculate and store the pipe values */ | |
747 | us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); | |
748 | us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); | |
749 | us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, | |
2e0fe709 | 750 | usb_endpoint_num(ep_out)); |
a1631062 | 751 | us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, |
2e0fe709 | 752 | usb_endpoint_num(ep_in)); |
1da177e4 LT |
753 | if (ep_int) { |
754 | us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, | |
2e0fe709 | 755 | usb_endpoint_num(ep_int)); |
1da177e4 LT |
756 | us->ep_bInterval = ep_int->bInterval; |
757 | } | |
758 | return 0; | |
759 | } | |
760 | ||
761 | /* Initialize all the dynamic resources we need */ | |
762 | static int usb_stor_acquire_resources(struct us_data *us) | |
763 | { | |
764 | int p; | |
3f13e66e | 765 | struct task_struct *th; |
1da177e4 LT |
766 | |
767 | us->current_urb = usb_alloc_urb(0, GFP_KERNEL); | |
768 | if (!us->current_urb) { | |
191648d0 | 769 | usb_stor_dbg(us, "URB allocation failed\n"); |
1da177e4 LT |
770 | return -ENOMEM; |
771 | } | |
772 | ||
1da177e4 LT |
773 | /* Just before we start our control thread, initialize |
774 | * the device if it needs initialization */ | |
b876aef7 AS |
775 | if (us->unusual_dev->initFunction) { |
776 | p = us->unusual_dev->initFunction(us); | |
777 | if (p) | |
778 | return p; | |
779 | } | |
1da177e4 LT |
780 | |
781 | /* Start up our control thread */ | |
ed76cacb | 782 | th = kthread_run(usb_stor_control_thread, us, "usb-storage"); |
3f13e66e | 783 | if (IS_ERR(th)) { |
cbd3af54 FC |
784 | dev_warn(&us->pusb_intf->dev, |
785 | "Unable to start control thread\n"); | |
3f13e66e | 786 | return PTR_ERR(th); |
1da177e4 | 787 | } |
ed76cacb | 788 | us->ctl_thread = th; |
1da177e4 LT |
789 | |
790 | return 0; | |
791 | } | |
792 | ||
793 | /* Release all our dynamic resources */ | |
794 | static void usb_stor_release_resources(struct us_data *us) | |
795 | { | |
1da177e4 | 796 | /* Tell the control thread to exit. The SCSI host must |
543f7810 AS |
797 | * already have been removed and the DISCONNECTING flag set |
798 | * so that we won't accept any more commands. | |
1da177e4 | 799 | */ |
191648d0 | 800 | usb_stor_dbg(us, "-- sending exit command to thread\n"); |
7119e3c3 | 801 | complete(&us->cmnd_ready); |
ed76cacb AS |
802 | if (us->ctl_thread) |
803 | kthread_stop(us->ctl_thread); | |
1da177e4 LT |
804 | |
805 | /* Call the destructor routine, if it exists */ | |
806 | if (us->extra_destructor) { | |
191648d0 | 807 | usb_stor_dbg(us, "-- calling extra_destructor()\n"); |
1da177e4 LT |
808 | us->extra_destructor(us->extra); |
809 | } | |
810 | ||
811 | /* Free the extra data and the URB */ | |
812 | kfree(us->extra); | |
813 | usb_free_urb(us->current_urb); | |
814 | } | |
815 | ||
816 | /* Dissociate from the USB device */ | |
817 | static void dissociate_dev(struct us_data *us) | |
818 | { | |
0ede76fc AS |
819 | /* Free the buffers */ |
820 | kfree(us->cr); | |
997ea58e | 821 | usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma); |
1da177e4 LT |
822 | |
823 | /* Remove our private data from the interface */ | |
824 | usb_set_intfdata(us->pusb_intf, NULL); | |
825 | } | |
826 | ||
543f7810 AS |
827 | /* First stage of disconnect processing: stop SCSI scanning, |
828 | * remove the host, and stop accepting new commands | |
829 | */ | |
77f46328 MD |
830 | static void quiesce_and_remove_host(struct us_data *us) |
831 | { | |
eecd11ed AS |
832 | struct Scsi_Host *host = us_to_host(us); |
833 | ||
543f7810 | 834 | /* If the device is really gone, cut short reset delays */ |
bb94a406 | 835 | if (us->pusb_dev->state == USB_STATE_NOTATTACHED) { |
543f7810 | 836 | set_bit(US_FLIDX_DISCONNECTING, &us->dflags); |
bb94a406 AS |
837 | wake_up(&us->delay_wait); |
838 | } | |
77f46328 | 839 | |
bb94a406 AS |
840 | /* Prevent SCSI scanning (if it hasn't started yet) |
841 | * or wait for the SCSI-scanning routine to stop. | |
543f7810 | 842 | */ |
bb94a406 AS |
843 | cancel_delayed_work_sync(&us->scan_dwork); |
844 | ||
845 | /* Balance autopm calls if scanning was cancelled */ | |
846 | if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags)) | |
847 | usb_autopm_put_interface_no_suspend(us->pusb_intf); | |
26186ba7 | 848 | |
543f7810 AS |
849 | /* Removing the host will perform an orderly shutdown: caches |
850 | * synchronized, disks spun down, etc. | |
851 | */ | |
eecd11ed | 852 | scsi_remove_host(host); |
2f67cd5b | 853 | |
543f7810 AS |
854 | /* Prevent any new commands from being accepted and cut short |
855 | * reset delays. | |
856 | */ | |
857 | scsi_lock(host); | |
858 | set_bit(US_FLIDX_DISCONNECTING, &us->dflags); | |
859 | scsi_unlock(host); | |
860 | wake_up(&us->delay_wait); | |
77f46328 MD |
861 | } |
862 | ||
863 | /* Second stage of disconnect processing: deallocate all resources */ | |
864 | static void release_everything(struct us_data *us) | |
865 | { | |
866 | usb_stor_release_resources(us); | |
867 | dissociate_dev(us); | |
868 | ||
869 | /* Drop our reference to the host; the SCSI core will free it | |
870 | * (and "us" along with it) when the refcount becomes 0. */ | |
871 | scsi_host_put(us_to_host(us)); | |
872 | } | |
873 | ||
bb94a406 AS |
874 | /* Delayed-work routine to carry out SCSI-device scanning */ |
875 | static void usb_stor_scan_dwork(struct work_struct *work) | |
1da177e4 | 876 | { |
bb94a406 AS |
877 | struct us_data *us = container_of(work, struct us_data, |
878 | scan_dwork.work); | |
cbd3af54 | 879 | struct device *dev = &us->pusb_intf->dev; |
1da177e4 | 880 | |
bb94a406 | 881 | dev_dbg(dev, "starting scan\n"); |
ec012476 | 882 | |
bb94a406 AS |
883 | /* For bulk-only devices, determine the max LUN value */ |
884 | if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) { | |
885 | mutex_lock(&us->dev_mutex); | |
886 | us->max_lun = usb_stor_Bulk_max_lun(us); | |
887 | mutex_unlock(&us->dev_mutex); | |
1da177e4 | 888 | } |
bb94a406 AS |
889 | scsi_scan_host(us_to_host(us)); |
890 | dev_dbg(dev, "scan complete\n"); | |
1da177e4 | 891 | |
bb94a406 | 892 | /* Should we unbind if no devices were detected? */ |
1da177e4 | 893 | |
f283925f | 894 | usb_autopm_put_interface(us->pusb_intf); |
bb94a406 | 895 | clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags); |
1da177e4 LT |
896 | } |
897 | ||
4c1bd3d7 DV |
898 | static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) |
899 | { | |
900 | struct usb_device *usb_dev = interface_to_usbdev(intf); | |
901 | ||
902 | if (usb_dev->bus->sg_tablesize) { | |
903 | return usb_dev->bus->sg_tablesize; | |
904 | } | |
905 | return SG_ALL; | |
906 | } | |
1da177e4 | 907 | |
e6e244b6 AS |
908 | /* First part of general USB mass-storage probing */ |
909 | int usb_stor_probe1(struct us_data **pus, | |
910 | struct usb_interface *intf, | |
911 | const struct usb_device_id *id, | |
912 | struct us_unusual_dev *unusual_dev) | |
1da177e4 LT |
913 | { |
914 | struct Scsi_Host *host; | |
915 | struct us_data *us; | |
1da177e4 | 916 | int result; |
a00828e9 | 917 | |
191648d0 | 918 | dev_info(&intf->dev, "USB Mass Storage device detected\n"); |
1da177e4 LT |
919 | |
920 | /* | |
921 | * Ask the SCSI layer to allocate a host structure, with extra | |
922 | * space at the end for our private us_data structure. | |
923 | */ | |
924 | host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); | |
925 | if (!host) { | |
191648d0 | 926 | dev_warn(&intf->dev, "Unable to allocate the scsi host\n"); |
1da177e4 LT |
927 | return -ENOMEM; |
928 | } | |
929 | ||
17f06022 RS |
930 | /* |
931 | * Allow 16-byte CDBs and thus > 2TB | |
932 | */ | |
933 | host->max_cmd_len = 16; | |
4c1bd3d7 | 934 | host->sg_tablesize = usb_stor_sg_tablesize(intf); |
e6e244b6 | 935 | *pus = us = host_to_us(host); |
4186ecf8 | 936 | mutex_init(&(us->dev_mutex)); |
c825bab0 | 937 | us_set_lock_class(&us->dev_mutex, intf); |
7119e3c3 | 938 | init_completion(&us->cmnd_ready); |
1da177e4 LT |
939 | init_completion(&(us->notify)); |
940 | init_waitqueue_head(&us->delay_wait); | |
bb94a406 | 941 | INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork); |
1da177e4 LT |
942 | |
943 | /* Associate the us_data structure with the USB device */ | |
944 | result = associate_dev(us, intf); | |
945 | if (result) | |
946 | goto BadDevice; | |
947 | ||
e6e244b6 AS |
948 | /* Get the unusual_devs entries and the descriptors */ |
949 | result = get_device_info(us, id, unusual_dev); | |
3c332422 DD |
950 | if (result) |
951 | goto BadDevice; | |
1da177e4 | 952 | |
e6e244b6 AS |
953 | /* Get standard transport and protocol settings */ |
954 | get_transport(us); | |
955 | get_protocol(us); | |
956 | ||
957 | /* Give the caller a chance to fill in specialized transport | |
958 | * or protocol settings. | |
959 | */ | |
960 | return 0; | |
961 | ||
962 | BadDevice: | |
191648d0 | 963 | usb_stor_dbg(us, "storage_probe() failed\n"); |
e6e244b6 AS |
964 | release_everything(us); |
965 | return result; | |
966 | } | |
967 | EXPORT_SYMBOL_GPL(usb_stor_probe1); | |
968 | ||
969 | /* Second part of general USB mass-storage probing */ | |
970 | int usb_stor_probe2(struct us_data *us) | |
971 | { | |
e6e244b6 | 972 | int result; |
cbd3af54 | 973 | struct device *dev = &us->pusb_intf->dev; |
e6e244b6 AS |
974 | |
975 | /* Make sure the transport and protocol have both been set */ | |
976 | if (!us->transport || !us->proto_handler) { | |
977 | result = -ENXIO; | |
1da177e4 | 978 | goto BadDevice; |
e6e244b6 | 979 | } |
191648d0 JP |
980 | usb_stor_dbg(us, "Transport: %s\n", us->transport_name); |
981 | usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name); | |
e6e244b6 AS |
982 | |
983 | /* fix for single-lun devices */ | |
984 | if (us->fflags & US_FL_SINGLE_LUN) | |
985 | us->max_lun = 0; | |
986 | ||
f4cc1834 ML |
987 | if (!(us->fflags & US_FL_SCM_MULT_TARG)) |
988 | us_to_host(us)->max_id = 1; | |
989 | ||
e6e244b6 | 990 | /* Find the endpoints and calculate pipe values */ |
1da177e4 LT |
991 | result = get_pipes(us); |
992 | if (result) | |
993 | goto BadDevice; | |
994 | ||
21c13a4f AS |
995 | /* |
996 | * If the device returns invalid data for the first READ(10) | |
997 | * command, indicate the command should be retried. | |
998 | */ | |
999 | if (us->fflags & US_FL_INITIAL_READ10) | |
1000 | set_bit(US_FLIDX_REDO_READ10, &us->dflags); | |
1001 | ||
1da177e4 LT |
1002 | /* Acquire all the other resources and add the host */ |
1003 | result = usb_stor_acquire_resources(us); | |
1004 | if (result) | |
1005 | goto BadDevice; | |
00fa43ef MW |
1006 | snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", |
1007 | dev_name(&us->pusb_intf->dev)); | |
cbd3af54 | 1008 | result = scsi_add_host(us_to_host(us), dev); |
1da177e4 | 1009 | if (result) { |
cbd3af54 FC |
1010 | dev_warn(dev, |
1011 | "Unable to add the scsi host\n"); | |
1da177e4 LT |
1012 | goto BadDevice; |
1013 | } | |
1014 | ||
bb94a406 | 1015 | /* Submit the delayed_work for SCSI-device scanning */ |
f283925f | 1016 | usb_autopm_get_interface_no_resume(us->pusb_intf); |
bb94a406 | 1017 | set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); |
1da177e4 | 1018 | |
bb94a406 AS |
1019 | if (delay_use > 0) |
1020 | dev_dbg(dev, "waiting for device to settle before scanning\n"); | |
1021 | queue_delayed_work(system_freezable_wq, &us->scan_dwork, | |
1022 | delay_use * HZ); | |
1da177e4 LT |
1023 | return 0; |
1024 | ||
1025 | /* We come here if there are any problems */ | |
1026 | BadDevice: | |
191648d0 | 1027 | usb_stor_dbg(us, "storage_probe() failed\n"); |
77f46328 | 1028 | release_everything(us); |
1da177e4 LT |
1029 | return result; |
1030 | } | |
e6e244b6 | 1031 | EXPORT_SYMBOL_GPL(usb_stor_probe2); |
1da177e4 | 1032 | |
e6e244b6 AS |
1033 | /* Handle a USB mass-storage disconnect */ |
1034 | void usb_stor_disconnect(struct usb_interface *intf) | |
1da177e4 LT |
1035 | { |
1036 | struct us_data *us = usb_get_intfdata(intf); | |
1037 | ||
77f46328 MD |
1038 | quiesce_and_remove_host(us); |
1039 | release_everything(us); | |
1da177e4 | 1040 | } |
e6e244b6 AS |
1041 | EXPORT_SYMBOL_GPL(usb_stor_disconnect); |
1042 | ||
1043 | /* The main probe routine for standard devices */ | |
1044 | static int storage_probe(struct usb_interface *intf, | |
1045 | const struct usb_device_id *id) | |
1046 | { | |
fd7ff36d | 1047 | struct us_unusual_dev *unusual_dev; |
e6e244b6 AS |
1048 | struct us_data *us; |
1049 | int result; | |
fd7ff36d | 1050 | int size; |
e6e244b6 | 1051 | |
5bfd5b5d HG |
1052 | /* If uas is enabled and this device can do uas then ignore it. */ |
1053 | #if IS_ENABLED(CONFIG_USB_UAS) | |
1054 | if (uas_use_uas_driver(intf, id)) | |
1055 | return -ENXIO; | |
1056 | #endif | |
1057 | ||
e6e244b6 | 1058 | /* |
e6e244b6 AS |
1059 | * If the device isn't standard (is handled by a subdriver |
1060 | * module) then don't accept it. | |
1061 | */ | |
f61870ee | 1062 | if (usb_usual_ignore_device(intf)) |
e6e244b6 AS |
1063 | return -ENXIO; |
1064 | ||
1065 | /* | |
1066 | * Call the general probe procedures. | |
1067 | * | |
1068 | * The unusual_dev_list array is parallel to the usb_storage_usb_ids | |
1069 | * table, so we use the index of the id entry to find the | |
1070 | * corresponding unusual_devs entry. | |
1071 | */ | |
fd7ff36d HL |
1072 | |
1073 | size = ARRAY_SIZE(us_unusual_dev_list); | |
1074 | if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) { | |
1075 | unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list; | |
1076 | } else { | |
1077 | unusual_dev = &for_dynamic_ids; | |
1078 | ||
191648d0 | 1079 | dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n", |
fd7ff36d HL |
1080 | id->idVendor, id->idProduct); |
1081 | } | |
1082 | ||
1083 | result = usb_stor_probe1(&us, intf, id, unusual_dev); | |
e6e244b6 AS |
1084 | if (result) |
1085 | return result; | |
1086 | ||
1087 | /* No special transport or protocol settings in the main module */ | |
1088 | ||
1089 | result = usb_stor_probe2(us); | |
1090 | return result; | |
1091 | } | |
1da177e4 | 1092 | |
ce2596df | 1093 | static struct usb_driver usb_storage_driver = { |
ce2596df AS |
1094 | .name = "usb-storage", |
1095 | .probe = storage_probe, | |
e6e244b6 AS |
1096 | .disconnect = usb_stor_disconnect, |
1097 | .suspend = usb_stor_suspend, | |
1098 | .resume = usb_stor_resume, | |
1099 | .reset_resume = usb_stor_reset_resume, | |
1100 | .pre_reset = usb_stor_pre_reset, | |
1101 | .post_reset = usb_stor_post_reset, | |
1102 | .id_table = usb_storage_usb_ids, | |
f283925f | 1103 | .supports_autosuspend = 1, |
543f7810 | 1104 | .soft_unbind = 1, |
ce2596df AS |
1105 | }; |
1106 | ||
4601de80 | 1107 | module_usb_driver(usb_storage_driver); |