[deliverable/linux.git] / drivers / video / backlight / Kconfig

#
# Backlight & LCD drivers configuration
#

menuconfig BACKLIGHT_LCD_SUPPORT
	bool "Backlight & LCD device support"
	help
	  Enable this to be able to choose the drivers for controlling the
	  backlight and the LCD panel on some platforms, for example on PDAs.

if BACKLIGHT_LCD_SUPPORT

#
# LCD
#
config LCD_CLASS_DEVICE
        tristate "Lowlevel LCD controls"
	default m
	help
	  This framework adds support for low-level control of LCD.
	  Some framebuffer devices connect to platform-specific LCD modules
	  in order to have a platform-specific way to control the flat panel
	  (contrast and applying power to the LCD (not to the backlight!)).

	  To have support for your specific LCD panel you will have to
	  select the proper drivers which depend on this option.

if LCD_CLASS_DEVICE

config LCD_CORGI
	tristate "LCD Panel support for SHARP corgi/spitz model"
	depends on SPI_MASTER && PXA_SHARPSL
	help
	  Say y here to support the LCD panels usually found on SHARP
	  corgi (C7x0) and spitz (Cxx00) models.

config LCD_L4F00242T03
	tristate "Epson L4F00242T03 LCD"
	depends on SPI_MASTER && GENERIC_GPIO
	help
	  SPI driver for Epson L4F00242T03. This provides basic support
	  for init and powering the LCD up/down through a sysfs interface.

config LCD_LMS283GF05
	tristate "Samsung LMS283GF05 LCD"
	depends on SPI_MASTER && GENERIC_GPIO
	help
	  SPI driver for Samsung LMS283GF05. This provides basic support
	  for powering the LCD up/down through a sysfs interface.

config LCD_LTV350QV
	tristate "Samsung LTV350QV LCD Panel"
	depends on SPI_MASTER
	help
	  If you have a Samsung LTV350QV LCD panel, say y to include a
	  power control driver for it.  The panel starts up in power
	  off state, so you need this driver in order to see any
	  output.

	  The LTV350QV panel is present on all ATSTK1000 boards.

config LCD_ILI9320
	tristate
	help
	  If you have a panel based on the ILI9320 controller chip
	  then say y to include a power driver for it.

config LCD_TDO24M
	tristate "Toppoly TDO24M  and TDO35S LCD Panels support"
	depends on SPI_MASTER
	help
	  If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
	  include the support for it.

config LCD_VGG2432A4
	tristate "VGG2432A4 LCM device support"
	depends on SPI_MASTER
	select LCD_ILI9320
	help
	  If you have a VGG2432A4 panel based on the ILI9320 controller chip
	  then say y to include a power driver for it.

config LCD_PLATFORM
	tristate "Platform LCD controls"
	help
	  This driver provides a platform-device registered LCD power
	  control interface.

config LCD_TOSA
	tristate "Sharp SL-6000 LCD Driver"
	depends on SPI && MACH_TOSA
	help
	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	  for its LCD.

config LCD_HP700
	tristate "HP Jornada 700 series LCD Driver"
	depends on SA1100_JORNADA720_SSP && !PREEMPT
	default y
	help
	  If you have an HP Jornada 700 series handheld (710/720/728)
	  say Y to enable LCD control driver.

config LCD_S6E63M0
	tristate "S6E63M0 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an S6E63M0 LCD Panel, say Y to enable its
	  LCD control driver.

config LCD_LD9040
	tristate "LD9040 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an LD9040 Panel, say Y to enable its
	  control driver.

config LCD_AMS369FG06
	tristate "AMS369FG06 AMOLED LCD Driver"
	depends on SPI && BACKLIGHT_CLASS_DEVICE
	default n
	help
	  If you have an AMS369FG06 AMOLED Panel, say Y to enable its
	  LCD control driver.

endif # LCD_CLASS_DEVICE

#
# Backlight
#
config BACKLIGHT_CLASS_DEVICE
        tristate "Lowlevel Backlight controls"
	default m
	help
	  This framework adds support for low-level control of the LCD
          backlight. This includes support for brightness and power.

	  To have support for your specific LCD panel you will have to
	  select the proper drivers which depend on this option.

if BACKLIGHT_CLASS_DEVICE

config BACKLIGHT_ATMEL_LCDC
	bool "Atmel LCDC Contrast-as-Backlight control"
	depends on FB_ATMEL
	default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
	help
	  This provides a backlight control internal to the Atmel LCDC
	  driver.  If the LCD "contrast control" on your board is wired
	  so it controls the backlight brightness, select this option to
	  export this as a PWM-based backlight control.

	  If in doubt, it's safe to enable this option; it doesn't kick
	  in unless the board's description says it's wired that way.

config BACKLIGHT_ATMEL_PWM
	tristate "Atmel PWM backlight control"
	depends on ATMEL_PWM
	help
	  Say Y here if you want to use the PWM peripheral in Atmel AT91 and
	  AVR32 devices. This driver will need additional platform data to know
	  which PWM instance to use and how to configure it.

	  To compile this driver as a module, choose M here: the module will be
	  called atmel-pwm-bl.

config BACKLIGHT_EP93XX
	tristate "Cirrus EP93xx Backlight Driver"
	depends on FB_EP93XX
	help
	  If you have a LCD backlight connected to the BRIGHT output of
	  the EP93xx, say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called ep93xx_bl.

config BACKLIGHT_GENERIC
	tristate "Generic (aka Sharp Corgi) Backlight Driver"
	default y
	help
	  Say y to enable the generic platform backlight driver previously
	  known as the Corgi backlight driver. If you have a Sharp Zaurus
	  SL-C7xx, SL-Cxx00 or SL-6000x say y.

config BACKLIGHT_LOCOMO
	tristate "Sharp LOCOMO LCD/Backlight Driver"
	depends on SHARP_LOCOMO
	default y
	help
	  If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
	  enable the LCD/backlight driver.

config BACKLIGHT_OMAP1
	tristate "OMAP1 PWL-based LCD Backlight"
	depends on ARCH_OMAP1
	default y
	help
	  This driver controls the LCD backlight level and power for
	  the PWL module of OMAP1 processors.  Say Y if your board
	  uses this hardware.

config BACKLIGHT_HP680
	tristate "HP Jornada 680 Backlight Driver"
	depends on SH_HP6XX
	default y
	help
	  If you have a HP Jornada 680, say y to enable the
	  backlight driver.

config BACKLIGHT_HP700
	tristate "HP Jornada 700 series Backlight Driver"
	depends on SA1100_JORNADA720_SSP && !PREEMPT
	default y
	help
	  If you have an HP Jornada 700 series,
	  say Y to include backlight control driver.

config BACKLIGHT_PROGEAR
	tristate "Frontpath ProGear Backlight Driver"
	depends on PCI && X86
	help
	  If you have a Frontpath ProGear say Y to enable the
	  backlight driver.

config BACKLIGHT_CARILLO_RANCH
	tristate "Intel Carillo Ranch Backlight Driver"
	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
	help
	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
	  backlight driver.

config BACKLIGHT_PWM
	tristate "Generic PWM based Backlight Driver"
	depends on HAVE_PWM
	help
	  If you have a LCD backlight adjustable by PWM, say Y to enable
	  this driver.

config BACKLIGHT_DA903X
	tristate "Backlight Driver for DA9030/DA9034 using WLED"
	depends on PMIC_DA903X
	help
	  If you have a LCD backlight connected to the WLED output of DA9030
	  or DA9034 WLED output, say Y here to enable this driver.

config BACKLIGHT_DA9052
	tristate "Dialog DA9052/DA9053 WLED"
	depends on PMIC_DA9052
	help
	  Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.

config BACKLIGHT_MAX8925
	tristate "Backlight driver for MAX8925"
	depends on MFD_MAX8925
	help
	  If you have a LCD backlight connected to the WLED output of MAX8925
	  WLED output, say Y here to enable this driver.

config BACKLIGHT_APPLE
       tristate "Apple Backlight Driver"
       depends on X86 && ACPI
       help
         If you have an Intel-based Apple say Y to enable a driver for its
	 backlight.

config BACKLIGHT_TOSA
	tristate "Sharp SL-6000 Backlight Driver"
	depends on I2C && MACH_TOSA && LCD_TOSA
	help
	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	  for its backlight

config BACKLIGHT_SAHARA
	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
	depends on X86
	help
	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
	  backlight driver.

config BACKLIGHT_WM831X
	tristate "WM831x PMIC Backlight Driver"
	depends on MFD_WM831X
	help
	  If you have a backlight driven by the ISINK and DCDC of a
	  WM831x PMIC say y to enable the backlight driver for it.

config BACKLIGHT_ADP5520
	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
	depends on PMIC_ADP5520
	help
	  If you have a LCD backlight connected to the BST/BL_SNK output of
	  ADP5520 or ADP5501, say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp5520_bl.

config BACKLIGHT_ADP8860
	tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select NEW_LEDS
	select LEDS_CLASS
	help
	  If you have a LCD backlight connected to the ADP8860, ADP8861 or
	  ADP8863 say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp8860_bl.

config BACKLIGHT_ADP8870
	tristate "Backlight Driver for ADP8870 using WLED"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	select NEW_LEDS
	select LEDS_CLASS
	help
	  If you have a LCD backlight connected to the ADP8870,
	  say Y here to enable this driver.

	  To compile this driver as a module, choose M here: the module will
	  be called adp8870_bl.

config BACKLIGHT_88PM860X
	tristate "Backlight Driver for 88PM8606 using WLED"
	depends on MFD_88PM860X
	help
	  Say Y to enable the backlight driver for Marvell 88PM8606.

config BACKLIGHT_PCF50633
	tristate "Backlight driver for NXP PCF50633 MFD"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
	help
	  If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
	  enable its driver.

config BACKLIGHT_AAT2870
	tristate "AnalogicTech AAT2870 Backlight"
	depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
	help
	  If you have a AnalogicTech AAT2870 say Y to enable the
	  backlight driver.

config BACKLIGHT_LP855X
	tristate "Backlight driver for TI LP855X"
	depends on BACKLIGHT_CLASS_DEVICE && I2C
	help
	  This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
	  backlight driver.

config BACKLIGHT_OT200
	tristate "Backlight driver for ot200 visualisation device"
	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
	help
	  To compile this driver as a module, choose M here: the module will be
	  called ot200_bl.

config BACKLIGHT_PANDORA
	tristate "Backlight driver for Pandora console"
	depends on TWL4030_CORE
	help
	  If you have a Pandora console, say Y to enable the
	  backlight driver.

endif # BACKLIGHT_CLASS_DEVICE

endif # BACKLIGHT_LCD_SUPPORT
Commit	Line	Data
1da177e4 LT	1	#
	2	# Backlight & LCD drivers configuration
	3	#
	4
	5	menuconfig BACKLIGHT_LCD_SUPPORT
	6	bool "Backlight & LCD device support"
	7	help
	8	Enable this to be able to choose the drivers for controlling the
	9	backlight and the LCD panel on some platforms, for example on PDAs.
	10
8fdd5767 HS	11	if BACKLIGHT_LCD_SUPPORT
8fdd5767 HS	12
fa9133c2 DB	13	#
	14	# LCD
	15	#
	16	config LCD_CLASS_DEVICE
	17	tristate "Lowlevel LCD controls"
1da177e4 LT	18	default m
1da177e4 LT	19	help
fa9133c2 DB	20	This framework adds support for low-level control of LCD.
	21	Some framebuffer devices connect to platform-specific LCD modules
	22	in order to have a platform-specific way to control the flat panel
	23	(contrast and applying power to the LCD (not to the backlight!)).
1da177e4 LT	24
	25	To have support for your specific LCD panel you will have to
	26	select the proper drivers which depend on this option.
	27
8fdd5767 HS	28	if LCD_CLASS_DEVICE
8fdd5767 HS	29
b18250a8 EM	30	config LCD_CORGI
b18250a8 EM	31	tristate "LCD Panel support for SHARP corgi/spitz model"
8fdd5767	32	depends on SPI_MASTER && PXA_SHARPSL
b18250a8 EM	33	help
	34	Say y here to support the LCD panels usually found on SHARP
	35	corgi (C7x0) and spitz (Cxx00) models.
	36
e7fb9c4a AP	37	config LCD_L4F00242T03
e7fb9c4a AP	38	tristate "Epson L4F00242T03 LCD"
8fdd5767	39	depends on SPI_MASTER && GENERIC_GPIO
e7fb9c4a AP	40	help
	41	SPI driver for Epson L4F00242T03. This provides basic support
	42	for init and powering the LCD up/down through a sysfs interface.
	43
5036cc41 MV	44	config LCD_LMS283GF05
5036cc41 MV	45	tristate "Samsung LMS283GF05 LCD"
8fdd5767	46	depends on SPI_MASTER && GENERIC_GPIO
5036cc41 MV	47	help
	48	SPI driver for Samsung LMS283GF05. This provides basic support
	49	for powering the LCD up/down through a sysfs interface.
	50
18f65c79 HS	51	config LCD_LTV350QV
18f65c79 HS	52	tristate "Samsung LTV350QV LCD Panel"
8fdd5767	53	depends on SPI_MASTER
18f65c79 HS	54	help
	55	If you have a Samsung LTV350QV LCD panel, say y to include a
	56	power control driver for it. The panel starts up in power
	57	off state, so you need this driver in order to see any
	58	output.
	59
	60	The LTV350QV panel is present on all ATSTK1000 boards.
	61
cccb6d3c BD	62	config LCD_ILI9320
cccb6d3c BD	63	tristate
cccb6d3c BD	64	help
	65	If you have a panel based on the ILI9320 controller chip
	66	then say y to include a power driver for it.
	67
dd89ccb2	68	config LCD_TDO24M
f4f6bda0	69	tristate "Toppoly TDO24M and TDO35S LCD Panels support"
8fdd5767	70	depends on SPI_MASTER
dd89ccb2	71	help
f4f6bda0	72	If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
dd89ccb2 EM	73	include the support for it.
dd89ccb2 EM	74
cccb6d3c BD	75	config LCD_VGG2432A4
cccb6d3c BD	76	tristate "VGG2432A4 LCM device support"
8fdd5767	77	depends on SPI_MASTER
cccb6d3c	78	select LCD_ILI9320
cccb6d3c BD	79	help
	80	If you have a VGG2432A4 panel based on the ILI9320 controller chip
	81	then say y to include a power driver for it.
	82
c25826a7 BD	83	config LCD_PLATFORM
c25826a7 BD	84	tristate "Platform LCD controls"
c25826a7 BD	85	help
	86	This driver provides a platform-device registered LCD power
	87	control interface.
	88
fbd1b17b DB	89	config LCD_TOSA
fbd1b17b DB	90	tristate "Sharp SL-6000 LCD Driver"
8fdd5767	91	depends on SPI && MACH_TOSA
fbd1b17b DB	92	help
	93	If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	94	for its LCD.
	95
9e124435 KE	96	config LCD_HP700
9e124435 KE	97	tristate "HP Jornada 700 series LCD Driver"
9e124435 KE	98	depends on SA1100_JORNADA720_SSP && !PREEMPT
	99	default y
	100	help
	101	If you have an HP Jornada 700 series handheld (710/720/728)
	102	say Y to enable LCD control driver.
	103
ee378a5c ID	104	config LCD_S6E63M0
	105	tristate "S6E63M0 AMOLED LCD Driver"
	106	depends on SPI && BACKLIGHT_CLASS_DEVICE
	107	default n
	108	help
	109	If you have an S6E63M0 LCD Panel, say Y to enable its
	110	LCD control driver.
	111
1baf0eb3 DL	112	config LCD_LD9040
	113	tristate "LD9040 AMOLED LCD Driver"
	114	depends on SPI && BACKLIGHT_CLASS_DEVICE
	115	default n
	116	help
	117	If you have an LD9040 Panel, say Y to enable its
	118	control driver.
	119
a4c8aaa5 JH	120	config LCD_AMS369FG06
	121	tristate "AMS369FG06 AMOLED LCD Driver"
	122	depends on SPI && BACKLIGHT_CLASS_DEVICE
	123	default n
	124	help
	125	If you have an AMS369FG06 AMOLED Panel, say Y to enable its
	126	LCD control driver.
	127
8fdd5767 HS	128	endif # LCD_CLASS_DEVICE
8fdd5767 HS	129
fa9133c2 DB	130	#
	131	# Backlight
	132	#
	133	config BACKLIGHT_CLASS_DEVICE
	134	tristate "Lowlevel Backlight controls"
1da177e4 LT	135	default m
1da177e4 LT	136	help
fa9133c2 DB	137	This framework adds support for low-level control of the LCD
fa9133c2 DB	138	backlight. This includes support for brightness and power.
1da177e4 LT	139
	140	To have support for your specific LCD panel you will have to
	141	select the proper drivers which depend on this option.
	142
8fdd5767 HS	143	if BACKLIGHT_CLASS_DEVICE
8fdd5767 HS	144
a9a84c37 DB	145	config BACKLIGHT_ATMEL_LCDC
a9a84c37 DB	146	bool "Atmel LCDC Contrast-as-Backlight control"
8fdd5767	147	depends on FB_ATMEL
915190f7	148	default y if MACH_SAM9261EK \|\| MACH_SAM9G10EK \|\| MACH_SAM9263EK
a9a84c37 DB	149	help
	150	This provides a backlight control internal to the Atmel LCDC
	151	driver. If the LCD "contrast control" on your board is wired
	152	so it controls the backlight brightness, select this option to
	153	export this as a PWM-based backlight control.
	154
	155	If in doubt, it's safe to enable this option; it doesn't kick
	156	in unless the board's description says it's wired that way.
	157
3e074058 HCE	158	config BACKLIGHT_ATMEL_PWM
3e074058 HCE	159	tristate "Atmel PWM backlight control"
8fdd5767	160	depends on ATMEL_PWM
3e074058 HCE	161	help
	162	Say Y here if you want to use the PWM peripheral in Atmel AT91 and
	163	AVR32 devices. This driver will need additional platform data to know
	164	which PWM instance to use and how to configure it.
	165
	166	To compile this driver as a module, choose M here: the module will be
	167	called atmel-pwm-bl.
	168
08b3924b HS	169	config BACKLIGHT_EP93XX
	170	tristate "Cirrus EP93xx Backlight Driver"
	171	depends on FB_EP93XX
	172	help
	173	If you have a LCD backlight connected to the BRIGHT output of
	174	the EP93xx, say Y here to enable this driver.
	175
	176	To compile this driver as a module, choose M here: the module will
	177	be called ep93xx_bl.
	178
d00ba726 RP	179	config BACKLIGHT_GENERIC
d00ba726 RP	180	tristate "Generic (aka Sharp Corgi) Backlight Driver"
d00ba726	181	default y
1da177e4	182	help
c3f8f650 RP	183	Say y to enable the generic platform backlight driver previously
c3f8f650 RP	184	known as the Corgi backlight driver. If you have a Sharp Zaurus
d00ba726	185	SL-C7xx, SL-Cxx00 or SL-6000x say y.
45e2a9b4	186
e4423781 RP	187	config BACKLIGHT_LOCOMO
e4423781 RP	188	tristate "Sharp LOCOMO LCD/Backlight Driver"
8fdd5767	189	depends on SHARP_LOCOMO
e4423781 RP	190	default y
	191	help
	192	If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
	193	enable the LCD/backlight driver.
	194
ec072b0f AZ	195	config BACKLIGHT_OMAP1
ec072b0f AZ	196	tristate "OMAP1 PWL-based LCD Backlight"
8fdd5767	197	depends on ARCH_OMAP1
ec072b0f AZ	198	default y
	199	help
	200	This driver controls the LCD backlight level and power for
	201	the PWL module of OMAP1 processors. Say Y if your board
	202	uses this hardware.
	203
06c6f900 AS	204	config BACKLIGHT_HP680
06c6f900 AS	205	tristate "HP Jornada 680 Backlight Driver"
8fdd5767	206	depends on SH_HP6XX
06c6f900 AS	207	default y
	208	help
	209	If you have a HP Jornada 680, say y to enable the
	210	backlight driver.
	211
13a7b5dc KE	212	config BACKLIGHT_HP700
13a7b5dc KE	213	tristate "HP Jornada 700 series Backlight Driver"
13a7b5dc KE	214	depends on SA1100_JORNADA720_SSP && !PREEMPT
	215	default y
	216	help
	217	If you have an HP Jornada 700 series,
	218	say Y to include backlight control driver.
	219
7a208463 MJ	220	config BACKLIGHT_PROGEAR
7a208463 MJ	221	tristate "Frontpath ProGear Backlight Driver"
8fdd5767	222	depends on PCI && X86
7a208463 MJ	223	help
	224	If you have a Frontpath ProGear say Y to enable the
	225	backlight driver.
dbe7e429 AH	226
	227	config BACKLIGHT_CARILLO_RANCH
	228	tristate "Intel Carillo Ranch Backlight Driver"
8fdd5767	229	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
dbe7e429 AH	230	help
	231	If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
	232	backlight driver.
42796d37	233
	234	config BACKLIGHT_PWM
	235	tristate "Generic PWM based Backlight Driver"
8fdd5767	236	depends on HAVE_PWM
42796d37	237	help
	238	If you have a LCD backlight adjustable by PWM, say Y to enable
	239	this driver.
7be35c72	240
923ae48b MR	241	config BACKLIGHT_DA903X
923ae48b MR	242	tristate "Backlight Driver for DA9030/DA9034 using WLED"
8fdd5767	243	depends on PMIC_DA903X
923ae48b MR	244	help
	245	If you have a LCD backlight connected to the WLED output of DA9030
	246	or DA9034 WLED output, say Y here to enable this driver.
	247
6ede3d83 AJ	248	config BACKLIGHT_DA9052
	249	tristate "Dialog DA9052/DA9053 WLED"
	250	depends on PMIC_DA9052
	251	help
	252	Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.
	253
4f811ef0 HZ	254	config BACKLIGHT_MAX8925
4f811ef0 HZ	255	tristate "Backlight driver for MAX8925"
8fdd5767	256	depends on MFD_MAX8925
4f811ef0 HZ	257	help
	258	If you have a LCD backlight connected to the WLED output of MAX8925
	259	WLED output, say Y here to enable this driver.
	260
39b3dee7 MG	261	config BACKLIGHT_APPLE
39b3dee7 MG	262	tristate "Apple Backlight Driver"
b372412e	263	depends on X86 && ACPI
7be35c72	264	help
39b3dee7	265	If you have an Intel-based Apple say Y to enable a driver for its
b372412e	266	backlight.
7be35c72	267
fbd1b17b DB	268	config BACKLIGHT_TOSA
fbd1b17b DB	269	tristate "Sharp SL-6000 Backlight Driver"
8fdd5767	270	depends on I2C && MACH_TOSA && LCD_TOSA
fbd1b17b DB	271	help
	272	If you have an Sharp SL-6000 Zaurus say Y to enable a driver
	273	for its backlight
	274
d03ebb12 CN	275	config BACKLIGHT_SAHARA
d03ebb12 CN	276	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
8fdd5767	277	depends on X86
d03ebb12 CN	278	help
	279	If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
	280	backlight driver.
a4f3d55c MB	281
	282	config BACKLIGHT_WM831X
	283	tristate "WM831x PMIC Backlight Driver"
8fdd5767	284	depends on MFD_WM831X
a4f3d55c MB	285	help
	286	If you have a backlight driven by the ISINK and DCDC of a
	287	WM831x PMIC say y to enable the backlight driver for it.
3b96ea9e	288
a7998cec MH	289	config BACKLIGHT_ADP5520
a7998cec MH	290	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
8fdd5767	291	depends on PMIC_ADP5520
a7998cec MH	292	help
	293	If you have a LCD backlight connected to the BST/BL_SNK output of
	294	ADP5520 or ADP5501, say Y here to enable this driver.
	295
	296	To compile this driver as a module, choose M here: the module will
	297	be called adp5520_bl.
	298
82fd53b7	299	config BACKLIGHT_ADP8860
c7c06d8a	300	tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
82fd53b7 MH	301	depends on BACKLIGHT_CLASS_DEVICE && I2C
	302	select NEW_LEDS
	303	select LEDS_CLASS
	304	help
c7c06d8a MH	305	If you have a LCD backlight connected to the ADP8860, ADP8861 or
c7c06d8a MH	306	ADP8863 say Y here to enable this driver.
82fd53b7 MH	307
	308	To compile this driver as a module, choose M here: the module will
	309	be called adp8860_bl.
	310
a59ec1e7 MH	311	config BACKLIGHT_ADP8870
	312	tristate "Backlight Driver for ADP8870 using WLED"
	313	depends on BACKLIGHT_CLASS_DEVICE && I2C
	314	select NEW_LEDS
	315	select LEDS_CLASS
	316	help
	317	If you have a LCD backlight connected to the ADP8870,
	318	say Y here to enable this driver.
	319
	320	To compile this driver as a module, choose M here: the module will
	321	be called adp8870_bl.
	322
d07e8bf8 HZ	323	config BACKLIGHT_88PM860X
d07e8bf8 HZ	324	tristate "Backlight Driver for 88PM8606 using WLED"
8fdd5767	325	depends on MFD_88PM860X
d07e8bf8 HZ	326	help
	327	Say Y to enable the backlight driver for Marvell 88PM8606.
	328
2ddfd12f LPC	329	config BACKLIGHT_PCF50633
	330	tristate "Backlight driver for NXP PCF50633 MFD"
	331	depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
	332	help
	333	If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
	334	enable its driver.
	335
4b0d711b	336	config BACKLIGHT_AAT2870
70d32719	337	tristate "AnalogicTech AAT2870 Backlight"
4b0d711b JP	338	depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
	339	help
	340	If you have a AnalogicTech AAT2870 say Y to enable the
	341	backlight driver.
	342
7be865ab KM	343	config BACKLIGHT_LP855X
	344	tristate "Backlight driver for TI LP855X"
	345	depends on BACKLIGHT_CLASS_DEVICE && I2C
	346	help
	347	This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
	348	backlight driver.
	349
c8df7428 CG	350	config BACKLIGHT_OT200
c8df7428 CG	351	tristate "Backlight driver for ot200 visualisation device"
2df5e129	352	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
c8df7428 CG	353	help
	354	To compile this driver as a module, choose M here: the module will be
	355	called ot200_bl.
	356
35c1682c GI	357	config BACKLIGHT_PANDORA
	358	tristate "Backlight driver for Pandora console"
	359	depends on TWL4030_CORE
	360	help
	361	If you have a Pandora console, say Y to enable the
	362	backlight driver.
	363
8fdd5767 HS	364	endif # BACKLIGHT_CLASS_DEVICE
	365
	366	endif # BACKLIGHT_LCD_SUPPORT