backlight: use pr_warn() and pr_debug() instead of printk()
[deliverable/linux.git] / drivers / video / backlight / progear_bl.c
CommitLineData
7a208463
MJ
1/*
2 * Backlight Driver for Frontpath ProGear HX1050+
3 *
4 * Copyright (c) 2006 Marcin Juszkiewicz
5 *
6 * Based on Progear LCD driver by M Schacht
7 * <mschacht at alumni dot washington dot edu>
8 *
9 * Based on Sharp's Corgi Backlight Driver
10 * Based on Backlight Driver for HP Jornada 680
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 */
17
18#include <linux/module.h>
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/platform_device.h>
22#include <linux/mutex.h>
23#include <linux/fb.h>
24#include <linux/backlight.h>
25#include <linux/pci.h>
7a208463
MJ
26
27#define PMU_LPCR 0xB0
28#define SB_MPS1 0x61
29#define HW_LEVEL_MAX 0x77
30#define HW_LEVEL_MIN 0x4f
31
32static struct pci_dev *pmu_dev = NULL;
33static struct pci_dev *sb_dev = NULL;
34
35static int progearbl_set_intensity(struct backlight_device *bd)
36{
599a52d1 37 int intensity = bd->props.brightness;
7a208463 38
599a52d1 39 if (bd->props.power != FB_BLANK_UNBLANK)
7a208463 40 intensity = 0;
599a52d1 41 if (bd->props.fb_blank != FB_BLANK_UNBLANK)
7a208463
MJ
42 intensity = 0;
43
44 pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
45
46 return 0;
47}
48
49static int progearbl_get_intensity(struct backlight_device *bd)
50{
51 u8 intensity;
52 pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
53
54 return intensity - HW_LEVEL_MIN;
55}
56
9905a43b 57static const struct backlight_ops progearbl_ops = {
7a208463
MJ
58 .get_brightness = progearbl_get_intensity,
59 .update_status = progearbl_set_intensity,
60};
61
62static int progearbl_probe(struct platform_device *pdev)
63{
a19a6ee6 64 struct backlight_properties props;
7a208463
MJ
65 u8 temp;
66 struct backlight_device *progear_backlight_device;
a4ebb780 67 int ret;
7a208463 68
89952d13 69 pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL);
7a208463
MJ
70 if (!pmu_dev) {
71 printk("ALI M7101 PMU not found.\n");
72 return -ENODEV;
73 }
74
89952d13 75 sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
7a208463
MJ
76 if (!sb_dev) {
77 printk("ALI 1533 SB not found.\n");
a4ebb780
JS
78 ret = -ENODEV;
79 goto put_pmu;
7a208463
MJ
80 }
81
82 /* Set SB_MPS1 to enable brightness control. */
83 pci_read_config_byte(sb_dev, SB_MPS1, &temp);
84 pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
85
a19a6ee6 86 memset(&props, 0, sizeof(struct backlight_properties));
bb7ca747 87 props.type = BACKLIGHT_RAW;
a19a6ee6 88 props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
7a208463
MJ
89 progear_backlight_device = backlight_device_register("progear-bl",
90 &pdev->dev, NULL,
a19a6ee6
MG
91 &progearbl_ops,
92 &props);
a4ebb780
JS
93 if (IS_ERR(progear_backlight_device)) {
94 ret = PTR_ERR(progear_backlight_device);
95 goto put_sb;
96 }
7a208463
MJ
97
98 platform_set_drvdata(pdev, progear_backlight_device);
99
599a52d1
RP
100 progear_backlight_device->props.power = FB_BLANK_UNBLANK;
101 progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
7a208463
MJ
102 progearbl_set_intensity(progear_backlight_device);
103
104 return 0;
a4ebb780
JS
105put_sb:
106 pci_dev_put(sb_dev);
107put_pmu:
108 pci_dev_put(pmu_dev);
109 return ret;
7a208463
MJ
110}
111
112static int progearbl_remove(struct platform_device *pdev)
113{
114 struct backlight_device *bd = platform_get_drvdata(pdev);
115 backlight_device_unregister(bd);
116
117 return 0;
118}
119
120static struct platform_driver progearbl_driver = {
121 .probe = progearbl_probe,
122 .remove = progearbl_remove,
123 .driver = {
124 .name = "progear-bl",
125 },
126};
127
128static struct platform_device *progearbl_device;
129
130static int __init progearbl_init(void)
131{
132 int ret = platform_driver_register(&progearbl_driver);
133
6cd6f35a
AM
134 if (ret)
135 return ret;
136 progearbl_device = platform_device_register_simple("progear-bl", -1,
137 NULL, 0);
138 if (IS_ERR(progearbl_device)) {
139 platform_driver_unregister(&progearbl_driver);
140 return PTR_ERR(progearbl_device);
7a208463
MJ
141 }
142
6cd6f35a 143 return 0;
7a208463
MJ
144}
145
146static void __exit progearbl_exit(void)
147{
148 pci_dev_put(pmu_dev);
149 pci_dev_put(sb_dev);
150
151 platform_device_unregister(progearbl_device);
152 platform_driver_unregister(&progearbl_driver);
153}
154
155module_init(progearbl_init);
156module_exit(progearbl_exit);
157
158MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>");
159MODULE_DESCRIPTION("ProGear Backlight Driver");
160MODULE_LICENSE("GPL");
This page took 0.517065 seconds and 5 git commands to generate.