OMAP: OMAPFB: split omapfb.h
[deliverable/linux.git] / drivers / video / omap / lcd_h3.c
CommitLineData
65316c91
ID
1/*
2 * LCD panel support for the TI OMAP H3 board
3 *
4 * Copyright (C) 2004 Nokia Corporation
5 * Author: Imre Deak <imre.deak@nokia.com>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 */
21
22#include <linux/module.h>
23#include <linux/platform_device.h>
6d16bfb5 24#include <linux/i2c/tps65010.h>
65316c91 25
a09e64fb 26#include <mach/gpio.h>
91773a00 27#include "omapfb.h"
65316c91
ID
28
29#define MODULE_NAME "omapfb-lcd_h3"
30
65316c91
ID
31static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
32{
33 return 0;
34}
35
36static void h3_panel_cleanup(struct lcd_panel *panel)
37{
38}
39
40static int h3_panel_enable(struct lcd_panel *panel)
41{
42 int r = 0;
43
44 /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
45 r = tps65010_set_gpio_out_value(GPIO1, HIGH);
46 if (!r)
47 r = tps65010_set_gpio_out_value(GPIO2, HIGH);
48 if (r)
1f7c8234 49 pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
65316c91
ID
50
51 return r;
52}
53
54static void h3_panel_disable(struct lcd_panel *panel)
55{
56 int r = 0;
57
58 /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
59 r = tps65010_set_gpio_out_value(GPIO1, LOW);
60 if (!r)
61 tps65010_set_gpio_out_value(GPIO2, LOW);
62 if (r)
1f7c8234 63 pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
65316c91
ID
64}
65
66static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
67{
68 return 0;
69}
70
71struct lcd_panel h3_panel = {
72 .name = "h3",
73 .config = OMAP_LCDC_PANEL_TFT,
74
75 .data_lines = 16,
76 .bpp = 16,
77 .x_res = 240,
78 .y_res = 320,
79 .pixel_clock = 12000,
80 .hsw = 12,
81 .hfp = 14,
82 .hbp = 72 - 12,
83 .vsw = 1,
84 .vfp = 1,
85 .vbp = 0,
86 .pcd = 0,
87
88 .init = h3_panel_init,
89 .cleanup = h3_panel_cleanup,
90 .enable = h3_panel_enable,
91 .disable = h3_panel_disable,
92 .get_caps = h3_panel_get_caps,
93};
94
95static int h3_panel_probe(struct platform_device *pdev)
96{
97 omapfb_register_panel(&h3_panel);
98 return 0;
99}
100
101static int h3_panel_remove(struct platform_device *pdev)
102{
103 return 0;
104}
105
106static int h3_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
107{
108 return 0;
109}
110
111static int h3_panel_resume(struct platform_device *pdev)
112{
113 return 0;
114}
115
116struct platform_driver h3_panel_driver = {
117 .probe = h3_panel_probe,
118 .remove = h3_panel_remove,
119 .suspend = h3_panel_suspend,
120 .resume = h3_panel_resume,
121 .driver = {
122 .name = "lcd_h3",
123 .owner = THIS_MODULE,
124 },
125};
126
3f6db50f 127static int __init h3_panel_drv_init(void)
65316c91
ID
128{
129 return platform_driver_register(&h3_panel_driver);
130}
131
3f6db50f 132static void __exit h3_panel_drv_cleanup(void)
65316c91
ID
133{
134 platform_driver_unregister(&h3_panel_driver);
135}
136
137module_init(h3_panel_drv_init);
138module_exit(h3_panel_drv_cleanup);
139
This page took 0.29872 seconds and 5 git commands to generate.