Commit | Line | Data |
---|---|---|
5e53c8ed | 1 | |
1da177e4 LT |
2 | # |
3 | # Watchdog device configuration | |
4 | # | |
5 | ||
261259b2 | 6 | menuconfig WATCHDOG |
1da177e4 LT |
7 | bool "Watchdog Timer Support" |
8 | ---help--- | |
9 | If you say Y here (and to one of the following options) and create a | |
10 | character special file /dev/watchdog with major number 10 and minor | |
11 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
12 | subsequently opening the file and then failing to write to it for | |
13 | longer than 1 minute will result in rebooting the machine. This | |
14 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 15 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
16 | implementation entirely in software (which can sometimes fail to |
17 | reboot the machine) and a driver for hardware watchdog boards, which | |
18 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
19 | your computer. For details, read |
20 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
21 | |
22 | The watchdog is usually used together with the watchdog daemon | |
23 | which is available from | |
24 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
25 | also monitor NFS connections and can reboot the machine when the process | |
26 | table is full. | |
27 | ||
28 | If unsure, say N. | |
29 | ||
261259b2 JE |
30 | if WATCHDOG |
31 | ||
43316044 WVS |
32 | config WATCHDOG_CORE |
33 | bool "WatchDog Timer Driver Core" | |
34 | ---help--- | |
35 | Say Y here if you want to use the new watchdog timer driver core. | |
36 | This driver provides a framework for all watchdog timer drivers | |
37 | and gives them the /dev/watchdog interface (and later also the | |
38 | sysfs interface). | |
39 | ||
1da177e4 LT |
40 | config WATCHDOG_NOWAYOUT |
41 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
42 | help |
43 | The default watchdog behaviour (which you get if you say N here) is | |
44 | to stop the timer if the process managing it closes the file | |
45 | /dev/watchdog. It's always remotely possible that this process might | |
46 | get killed. If you say Y here, the watchdog cannot be stopped once | |
47 | it has been started. | |
48 | ||
49 | # | |
50 | # General Watchdog drivers | |
51 | # | |
52 | ||
53 | comment "Watchdog Device Drivers" | |
1da177e4 | 54 | |
2621e2a1 | 55 | # Architecture Independent |
1da177e4 LT |
56 | |
57 | config SOFT_WATCHDOG | |
58 | tristate "Software watchdog" | |
a5132caf | 59 | select WATCHDOG_CORE |
1da177e4 LT |
60 | help |
61 | A software monitoring watchdog. This will fail to reboot your system | |
62 | from some situations that the hardware watchdog will recover | |
63 | from. Equally it's a lot cheaper to install. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called softdog. | |
67 | ||
664a0d78 AJ |
68 | config DA9052_WATCHDOG |
69 | tristate "Dialog DA9052 Watchdog" | |
70 | depends on PMIC_DA9052 | |
71 | select WATCHDOG_CORE | |
72 | help | |
73 | Support for the watchdog in the DA9052 PMIC. Watchdog trigger | |
74 | cause system reset. | |
75 | ||
76 | Say Y here to include support for the DA9052 watchdog. | |
77 | Alternatively say M to compile the driver as a module, | |
78 | which will be called da9052_wdt. | |
79 | ||
312b00e1 AJ |
80 | config DA9055_WATCHDOG |
81 | tristate "Dialog Semiconductor DA9055 Watchdog" | |
82 | depends on MFD_DA9055 | |
12a5c05c | 83 | select WATCHDOG_CORE |
312b00e1 AJ |
84 | help |
85 | If you say yes here you get support for watchdog on the Dialog | |
86 | Semiconductor DA9055 PMIC. | |
87 | ||
88 | This driver can also be built as a module. If so, the module | |
89 | will be called da9055_wdt. | |
90 | ||
5e9c16e3 KG |
91 | config DA9063_WATCHDOG |
92 | tristate "Dialog DA9063 Watchdog" | |
93 | depends on MFD_DA9063 | |
94 | select WATCHDOG_CORE | |
95 | help | |
96 | Support for the watchdog in the DA9063 PMIC. | |
97 | ||
98 | This driver can be built as a module. The module name is da9063_wdt. | |
99 | ||
7a7cb009 T |
100 | config DA9062_WATCHDOG |
101 | tristate "Dialog DA9062 Watchdog" | |
102 | depends on MFD_DA9062 | |
103 | select WATCHDOG_CORE | |
104 | help | |
105 | Support for the watchdog in the DA9062 PMIC. | |
106 | ||
107 | This driver can be built as a module. The module name is da9062_wdt. | |
108 | ||
25134eaf AS |
109 | config GPIO_WATCHDOG |
110 | tristate "Watchdog device controlled through GPIO-line" | |
111 | depends on OF_GPIO | |
112 | select WATCHDOG_CORE | |
113 | help | |
114 | If you say yes here you get support for watchdog device | |
115 | controlled through GPIO-line. | |
116 | ||
5e53c8ed JBT |
117 | config GPIO_WATCHDOG_ARCH_INITCALL |
118 | bool "Register the watchdog as early as possible" | |
119 | depends on GPIO_WATCHDOG=y | |
120 | help | |
121 | In some situations, the default initcall level (module_init) | |
122 | in not early enough in the boot process to avoid the watchdog | |
123 | to be triggered. | |
124 | If you say yes here, the initcall level would be raised to | |
125 | arch_initcall. | |
126 | If in doubt, say N. | |
127 | ||
50332639 AW |
128 | config MENF21BMC_WATCHDOG |
129 | tristate "MEN 14F021P00 BMC Watchdog" | |
130 | depends on MFD_MENF21BMC | |
131 | select WATCHDOG_CORE | |
132 | help | |
133 | Say Y here to include support for the MEN 14F021P00 BMC Watchdog. | |
134 | ||
135 | This driver can also be built as a module. If so the module | |
136 | will be called menf21bmc_wdt. | |
137 | ||
502a0106 MB |
138 | config WM831X_WATCHDOG |
139 | tristate "WM831x watchdog" | |
140 | depends on MFD_WM831X | |
00411ee9 | 141 | select WATCHDOG_CORE |
502a0106 MB |
142 | help |
143 | Support for the watchdog in the WM831x AudioPlus PMICs. When | |
144 | the watchdog triggers the system will be reset. | |
145 | ||
006948ba MB |
146 | config WM8350_WATCHDOG |
147 | tristate "WM8350 watchdog" | |
148 | depends on MFD_WM8350 | |
2e51d90f | 149 | select WATCHDOG_CORE |
006948ba MB |
150 | help |
151 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
152 | the watchdog triggers the system will be reset. | |
153 | ||
c9dcf9f2 MS |
154 | config XILINX_WATCHDOG |
155 | tristate "Xilinx Watchdog timer" | |
71fd380a | 156 | depends on HAS_IOMEM |
c9dcf9f2 MS |
157 | select WATCHDOG_CORE |
158 | help | |
159 | Watchdog driver for the xps_timebase_wdt ip core. | |
160 | ||
161 | To compile this driver as a module, choose M here: the | |
162 | module will be called of_xilinx_wdt. | |
163 | ||
c0e962f9 WVS |
164 | # ALPHA Architecture |
165 | ||
1da177e4 LT |
166 | # ARM Architecture |
167 | ||
4a370278 VK |
168 | config ARM_SP805_WATCHDOG |
169 | tristate "ARM SP805 Watchdog" | |
e30722e4 | 170 | depends on (ARM || ARM64) && ARM_AMBA |
4a516539 | 171 | select WATCHDOG_CORE |
4a370278 VK |
172 | help |
173 | ARM Primecell SP805 Watchdog timer. This will reboot your system when | |
174 | the timeout is reached. | |
175 | ||
bdcff345 | 176 | config AT91RM9200_WATCHDOG |
853807fb | 177 | tristate "AT91RM9200 watchdog" |
8432f9e5 | 178 | depends on SOC_AT91RM9200 && MFD_SYSCON |
853807fb AV |
179 | help |
180 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
181 | system when the timeout is reached. | |
182 | ||
e6bb42e3 | 183 | config AT91SAM9X_WATCHDOG |
f0e625c1 | 184 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
ee72f18b | 185 | depends on ARCH_AT91 |
490ac7af | 186 | select WATCHDOG_CORE |
e6bb42e3 | 187 | help |
f0e625c1 AV |
188 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
189 | reboot your system when the timeout is reached. | |
e6bb42e3 | 190 | |
76534860 WY |
191 | config SAMA5D4_WATCHDOG |
192 | tristate "Atmel SAMA5D4 Watchdog Timer" | |
193 | depends on ARCH_AT91 | |
194 | select WATCHDOG_CORE | |
195 | help | |
196 | Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. | |
197 | Its Watchdog Timer Mode Register can be written more than once. | |
198 | This will reboot your system when the timeout is reached. | |
199 | ||
58bf0164 HK |
200 | config CADENCE_WATCHDOG |
201 | tristate "Cadence Watchdog Timer" | |
6960d485 | 202 | depends on HAS_IOMEM |
58bf0164 HK |
203 | select WATCHDOG_CORE |
204 | help | |
205 | Say Y here if you want to include support for the watchdog | |
206 | timer in the Xilinx Zynq. | |
207 | ||
1da177e4 LT |
208 | config 21285_WATCHDOG |
209 | tristate "DC21285 watchdog" | |
261259b2 | 210 | depends on FOOTBRIDGE |
1da177e4 | 211 | help |
e0845bf4 | 212 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
213 | here if you wish to use this. Alternatively say M to compile the |
214 | driver as a module, which will be called wdt285. | |
215 | ||
216 | This driver does not work on all machines. In particular, early CATS | |
217 | boards have hardware problems that will cause the machine to simply | |
218 | lock up if the watchdog fires. | |
219 | ||
220 | "If in doubt, leave it out" - say N. | |
221 | ||
222 | config 977_WATCHDOG | |
223 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 224 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
225 | help |
226 | Say Y here to include support for the WB977 watchdog included in | |
227 | NetWinder machines. Alternatively say M to compile the driver as | |
228 | a module, which will be called wdt977. | |
229 | ||
230 | Not sure? It's safe to say N. | |
231 | ||
232 | config IXP4XX_WATCHDOG | |
233 | tristate "IXP4xx Watchdog" | |
261259b2 | 234 | depends on ARCH_IXP4XX |
1da177e4 LT |
235 | help |
236 | Say Y here if to include support for the watchdog timer | |
237 | in the Intel IXP4xx network processors. This driver can | |
238 | be built as a module by choosing M. The module will | |
239 | be called ixp4xx_wdt. | |
240 | ||
241 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
242 | which doesn't reset any peripherals. There are circumstances | |
243 | where the watchdog will fail to reset the board correctly | |
244 | (e.g., if the boot ROM is in an unreadable state). | |
245 | ||
246 | Say N if you are unsure. | |
247 | ||
ccb8f430 AV |
248 | config KS8695_WATCHDOG |
249 | tristate "KS8695 watchdog" | |
250 | depends on ARCH_KS8695 | |
251 | help | |
252 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
253 | system when the timeout is reached. | |
254 | ||
8740f71d BG |
255 | config HAVE_S3C2410_WATCHDOG |
256 | bool | |
257 | help | |
258 | This will include watchdog timer support for Samsung SoCs. If | |
259 | you want to include watchdog support for any machine, kindly | |
260 | select this in the respective mach-XXXX/Kconfig file. | |
261 | ||
1da177e4 LT |
262 | config S3C2410_WATCHDOG |
263 | tristate "S3C2410 Watchdog" | |
b130d5c2 | 264 | depends on HAVE_S3C2410_WATCHDOG |
25dc46e3 | 265 | select WATCHDOG_CORE |
4f1f653a | 266 | select MFD_SYSCON if ARCH_EXYNOS5 |
1da177e4 | 267 | help |
8740f71d BG |
268 | Watchdog timer block in the Samsung SoCs. This will reboot |
269 | the system when the timer expires with the watchdog enabled. | |
1da177e4 LT |
270 | |
271 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 272 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
273 | then watchdog intervals of over approximately 20seconds are |
274 | unavailable. | |
275 | ||
276 | The driver can be built as a module by choosing M, and will | |
277 | be called s3c2410_wdt | |
278 | ||
279 | config SA1100_WATCHDOG | |
280 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 281 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
282 | help |
283 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
284 | reboot your system when timeout is reached. | |
285 | ||
286 | NOTE: once enabled, this timer cannot be disabled. | |
287 | ||
288 | To compile this driver as a module, choose M here: the | |
289 | module will be called sa1100_wdt. | |
290 | ||
c9353ae1 JI |
291 | config DW_WATCHDOG |
292 | tristate "Synopsys DesignWare watchdog" | |
1ccfe6f9 | 293 | depends on HAS_IOMEM |
c9353ae1 JI |
294 | help |
295 | Say Y here if to include support for the Synopsys DesignWare | |
58a251f2 | 296 | watchdog timer found in many chips. |
c9353ae1 JI |
297 | To compile this driver as a module, choose M here: the |
298 | module will be called dw_wdt. | |
299 | ||
f52ac8fe AZ |
300 | config EP93XX_WATCHDOG |
301 | tristate "EP93xx Watchdog" | |
261259b2 | 302 | depends on ARCH_EP93XX |
e12a679d | 303 | select WATCHDOG_CORE |
f52ac8fe AZ |
304 | help |
305 | Say Y here if to include support for the watchdog timer | |
306 | embedded in the Cirrus Logic EP93xx family of devices. | |
307 | ||
308 | To compile this driver as a module, choose M here: the | |
309 | module will be called ep93xx_wdt. | |
310 | ||
7768a13c KS |
311 | config OMAP_WATCHDOG |
312 | tristate "OMAP Watchdog" | |
77165a48 | 313 | depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS |
67c0f554 | 314 | select WATCHDOG_CORE |
7768a13c | 315 | help |
77165a48 SS |
316 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' |
317 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. | |
7768a13c | 318 | |
9325fa36 | 319 | config PNX4008_WATCHDOG |
d684f05f RS |
320 | tristate "LPC32XX Watchdog" |
321 | depends on ARCH_LPC32XX | |
6b1e8386 | 322 | select WATCHDOG_CORE |
9325fa36 VW |
323 | help |
324 | Say Y here if to include support for the watchdog timer | |
d684f05f | 325 | in the LPC32XX processor. |
9325fa36 VW |
326 | This driver can be built as a module by choosing M. The module |
327 | will be called pnx4008_wdt. | |
328 | ||
329 | Say N if you are unsure. | |
330 | ||
70c14ff0 DW |
331 | config IOP_WATCHDOG |
332 | tristate "IOP Watchdog" | |
ec2e32ca | 333 | depends on ARCH_IOP13XX |
70c14ff0 DW |
334 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
335 | help | |
336 | Say Y here if to include support for the watchdog timer | |
337 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
338 | be built as a module by choosing M. The module will | |
339 | be called iop_wdt. | |
340 | ||
341 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
342 | affect both cores and the peripherals of the IOP. The ATU-X | |
343 | and/or ATUe configuration registers will remain intact, but if | |
344 | operating as an Root Complex and/or Central Resource, the PCI-X | |
345 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
346 | ||
7d831bf5 VB |
347 | config DAVINCI_WATCHDOG |
348 | tristate "DaVinci watchdog" | |
8832b200 | 349 | depends on ARCH_DAVINCI || ARCH_KEYSTONE |
f48f3cea | 350 | select WATCHDOG_CORE |
7d831bf5 VB |
351 | help |
352 | Say Y here if to include support for the watchdog timer | |
8832b200 | 353 | in the DaVinci DM644x/DM646x or Keystone processors. |
7d831bf5 VB |
354 | To compile this driver as a module, choose M here: the |
355 | module will be called davinci_wdt. | |
356 | ||
357 | NOTE: once enabled, this timer cannot be disabled. | |
358 | Say N if you are unsure. | |
359 | ||
3b937a7d NP |
360 | config ORION_WATCHDOG |
361 | tristate "Orion watchdog" | |
6da41613 | 362 | depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU |
0dd6e484 | 363 | select WATCHDOG_CORE |
22ac9232 SB |
364 | help |
365 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 366 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 367 | To compile this driver as a module, choose M here: the |
3b937a7d | 368 | module will be called orion_wdt. |
22ac9232 | 369 | |
22b1c841 BG |
370 | config RN5T618_WATCHDOG |
371 | tristate "Ricoh RN5T618 watchdog" | |
372 | depends on MFD_RN5T618 | |
373 | select WATCHDOG_CORE | |
374 | help | |
375 | If you say yes here you get support for watchdog on the Ricoh | |
376 | RN5T618 PMIC. | |
377 | ||
378 | This driver can also be built as a module. If so, the module | |
379 | will be called rn5t618_wdt. | |
380 | ||
d00680ed CC |
381 | config SUNXI_WATCHDOG |
382 | tristate "Allwinner SoCs watchdog support" | |
383 | depends on ARCH_SUNXI | |
384 | select WATCHDOG_CORE | |
385 | help | |
386 | Say Y here to include support for the watchdog timer | |
387 | in Allwinner SoCs. | |
388 | To compile this driver as a module, choose M here: the | |
389 | module will be called sunxi_wdt. | |
390 | ||
01480701 LW |
391 | config COH901327_WATCHDOG |
392 | bool "ST-Ericsson COH 901 327 watchdog" | |
393 | depends on ARCH_U300 | |
394 | default y if MACH_U300 | |
15b25701 | 395 | select WATCHDOG_CORE |
01480701 LW |
396 | help |
397 | Say Y here to include Watchdog timer support for the | |
398 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
399 | This watchdog is used to reset the system and thus cannot be | |
400 | compiled as a module. | |
401 | ||
80e45b1e TK |
402 | config TWL4030_WATCHDOG |
403 | tristate "TWL4030 Watchdog" | |
404 | depends on TWL4030_CORE | |
b2c4e4b2 | 405 | select WATCHDOG_CORE |
80e45b1e TK |
406 | help |
407 | Support for TI TWL4030 watchdog. Say 'Y' here to enable the | |
408 | watchdog timer support for TWL4030 chips. | |
409 | ||
de6303ab WS |
410 | config STMP3XXX_RTC_WATCHDOG |
411 | tristate "Freescale STMP3XXX & i.MX23/28 watchdog" | |
412 | depends on RTC_DRV_STMP | |
413 | select WATCHDOG_CORE | |
414 | help | |
415 | Say Y here to include support for the watchdog timer inside | |
416 | the RTC for the STMP37XX/378X or i.MX23/28 SoC. | |
417 | To compile this driver as a module, choose M here: the | |
418 | module will be called stmp3xxx_rtc_wdt. | |
419 | ||
0400e313 WZ |
420 | config NUC900_WATCHDOG |
421 | tristate "Nuvoton NUC900 watchdog" | |
422 | depends on ARCH_W90X900 | |
423 | help | |
424 | Say Y here if to include support for the watchdog timer | |
425 | for the Nuvoton NUC900 series SoCs. | |
426 | To compile this driver as a module, choose M here: the | |
427 | module will be called nuc900_wdt. | |
428 | ||
c90bf2aa MW |
429 | config TS72XX_WATCHDOG |
430 | tristate "TS-72XX SBC Watchdog" | |
431 | depends on MACH_TS72XX | |
432 | help | |
433 | Technologic Systems TS-7200, TS-7250 and TS-7260 boards have | |
434 | watchdog timer implemented in a external CPLD chip. Say Y here | |
435 | if you want to support for the watchdog timer on TS-72XX boards. | |
436 | ||
437 | To compile this driver as a module, choose M here: the | |
438 | module will be called ts72xx_wdt. | |
439 | ||
5e803716 MZ |
440 | config MAX63XX_WATCHDOG |
441 | tristate "Max63xx watchdog" | |
04658449 | 442 | depends on HAS_IOMEM |
a0f36833 | 443 | select WATCHDOG_CORE |
5e803716 MZ |
444 | help |
445 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | |
446 | ||
bb2fd8a8 WS |
447 | config IMX2_WDT |
448 | tristate "IMX2+ Watchdog" | |
646251a5 | 449 | depends on ARCH_MXC || ARCH_LAYERSCAPE |
a7977003 | 450 | select REGMAP_MMIO |
faad5de0 | 451 | select WATCHDOG_CORE |
bb2fd8a8 WS |
452 | help |
453 | This is the driver for the hardware watchdog | |
454 | on the Freescale IMX2 and later processors. | |
455 | If you have one of these processors and wish to have | |
456 | watchdog support enabled, say Y, otherwise say N. | |
457 | ||
458 | To compile this driver as a module, choose M here: the | |
459 | module will be called imx2_wdt. | |
460 | ||
f0e5bd41 FB |
461 | config UX500_WATCHDOG |
462 | tristate "ST-Ericsson Ux500 watchdog" | |
463 | depends on MFD_DB8500_PRCMU | |
464 | select WATCHDOG_CORE | |
465 | default y | |
466 | help | |
467 | Say Y here to include Watchdog timer support for the watchdog | |
468 | existing in the prcmu of ST-Ericsson Ux500 series platforms. | |
469 | ||
470 | To compile this driver as a module, choose M here: the | |
471 | module will be called ux500_wdt. | |
472 | ||
3d3a6d18 AK |
473 | config RETU_WATCHDOG |
474 | tristate "Retu watchdog" | |
475 | depends on MFD_RETU | |
476 | select WATCHDOG_CORE | |
477 | help | |
478 | Retu watchdog driver for Nokia Internet Tablets (770, N800, | |
479 | N810). At least on N800 the watchdog cannot be disabled, so | |
480 | this driver is essential and you should enable it. | |
481 | ||
482 | To compile this driver as a module, choose M here: the | |
483 | module will be called retu_wdt. | |
484 | ||
e14538e0 JJ |
485 | config MOXART_WDT |
486 | tristate "MOXART watchdog" | |
487 | depends on ARCH_MOXART | |
488 | help | |
489 | Say Y here to include Watchdog timer support for the watchdog | |
490 | existing on the MOXA ART SoC series platforms. | |
491 | ||
492 | To compile this driver as a module, choose M here: the | |
493 | module will be called moxart_wdt. | |
494 | ||
f0fcbdbf XD |
495 | config SIRFSOC_WATCHDOG |
496 | tristate "SiRFSOC watchdog" | |
497 | depends on ARCH_SIRF | |
498 | select WATCHDOG_CORE | |
499 | default y | |
500 | help | |
501 | Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When | |
502 | the watchdog triggers the system will be reset. | |
503 | ||
f27925a6 LJ |
504 | config ST_LPC_WATCHDOG |
505 | tristate "STMicroelectronics LPC Watchdog" | |
506 | depends on ARCH_STI | |
507 | depends on OF | |
508 | select WATCHDOG_CORE | |
509 | help | |
510 | Say Y here to include STMicroelectronics Low Power Controller | |
511 | (LPC) based Watchdog timer support. | |
512 | ||
513 | To compile this driver as a module, choose M here: the | |
514 | module will be called st_lpc_wdt. | |
515 | ||
c33a1597 AC |
516 | config TEGRA_WATCHDOG |
517 | tristate "Tegra watchdog" | |
71fd380a | 518 | depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM |
c33a1597 AC |
519 | select WATCHDOG_CORE |
520 | help | |
521 | Say Y here to include support for the watchdog timer | |
522 | embedded in NVIDIA Tegra SoCs. | |
523 | ||
524 | To compile this driver as a module, choose M here: the | |
525 | module will be called tegra_wdt. | |
526 | ||
1094ebe9 JC |
527 | config QCOM_WDT |
528 | tristate "QCOM watchdog" | |
529 | depends on HAS_IOMEM | |
530 | depends on ARCH_QCOM | |
531 | select WATCHDOG_CORE | |
532 | help | |
533 | Say Y here to include Watchdog timer support for the watchdog found | |
534 | on QCOM chipsets. Currently supported targets are the MSM8960, | |
535 | APQ8064, and IPQ8064. | |
536 | ||
537 | To compile this driver as a module, choose M here: the | |
538 | module will be called qcom_wdt. | |
539 | ||
22e1b8f6 CC |
540 | config MESON_WATCHDOG |
541 | tristate "Amlogic Meson SoCs watchdog support" | |
542 | depends on ARCH_MESON | |
543 | select WATCHDOG_CORE | |
544 | help | |
545 | Say Y here to include support for the watchdog timer | |
546 | in Amlogic Meson SoCs. | |
547 | To compile this driver as a module, choose M here: the | |
548 | module will be called meson_wdt. | |
549 | ||
a44a4553 MB |
550 | config MEDIATEK_WATCHDOG |
551 | tristate "Mediatek SoCs watchdog support" | |
552 | depends on ARCH_MEDIATEK | |
553 | select WATCHDOG_CORE | |
554 | help | |
555 | Say Y here to include support for the watchdog timer | |
556 | in Mediatek SoCs. | |
557 | To compile this driver as a module, choose M here: the | |
558 | module will be called mtk_wdt. | |
559 | ||
336694a0 BS |
560 | config DIGICOLOR_WATCHDOG |
561 | tristate "Conexant Digicolor SoCs watchdog support" | |
562 | depends on ARCH_DIGICOLOR | |
563 | select WATCHDOG_CORE | |
564 | help | |
565 | Say Y here to include support for the watchdog timer | |
566 | in Conexant Digicolor SoCs. | |
567 | To compile this driver as a module, choose M here: the | |
568 | module will be called digicolor_wdt. | |
569 | ||
7c25f8c9 AA |
570 | config LPC18XX_WATCHDOG |
571 | tristate "LPC18xx/43xx Watchdog" | |
572 | depends on ARCH_LPC18XX || COMPILE_TEST | |
573 | select WATCHDOG_CORE | |
574 | help | |
575 | Say Y here if to include support for the watchdog timer | |
576 | in NXP LPC SoCs family, which includes LPC18xx/LPC43xx | |
577 | processors. | |
578 | To compile this driver as a module, choose M here: the | |
579 | module will be called lpc18xx_wdt. | |
580 | ||
a9cb3959 HCE |
581 | # AVR32 Architecture |
582 | ||
583 | config AT32AP700X_WDT | |
584 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 585 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
586 | help |
587 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
588 | your system when the timeout is reached. | |
589 | ||
c0e962f9 | 590 | # BLACKFIN Architecture |
1e6d320f BW |
591 | |
592 | config BFIN_WDT | |
593 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 594 | depends on BLACKFIN |
1e6d320f BW |
595 | ---help--- |
596 | If you say yes here you will get support for the Blackfin On-Chip | |
597 | Watchdog Timer. If you have one of these processors and wish to | |
598 | have watchdog support enabled, say Y, otherwise say N. | |
599 | ||
600 | To compile this driver as a module, choose M here: the | |
601 | module will be called bfin_wdt. | |
602 | ||
c0e962f9 WVS |
603 | # CRIS Architecture |
604 | ||
605 | # FRV Architecture | |
606 | ||
1da177e4 LT |
607 | # X86 (i386 + ia64 + x86_64) Architecture |
608 | ||
609 | config ACQUIRE_WDT | |
610 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 611 | depends on X86 |
1da177e4 LT |
612 | ---help--- |
613 | This is the driver for the hardware watchdog on Single Board | |
614 | Computers produced by Acquire Inc (and others). This watchdog | |
615 | simply watches your kernel to make sure it doesn't freeze, and if | |
616 | it does, it reboots your computer after a certain amount of time. | |
617 | ||
618 | To compile this driver as a module, choose M here: the | |
619 | module will be called acquirewdt. | |
620 | ||
621 | Most people will say N. | |
622 | ||
623 | config ADVANTECH_WDT | |
624 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 625 | depends on X86 |
1da177e4 LT |
626 | help |
627 | If you are configuring a Linux kernel for the Advantech single-board | |
628 | computer, say `Y' here to support its built-in watchdog timer | |
629 | feature. More information can be found at | |
630 | <http://www.advantech.com.tw/products/> | |
631 | ||
632 | config ALIM1535_WDT | |
633 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 634 | depends on X86 && PCI |
1da177e4 LT |
635 | ---help--- |
636 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
637 | ||
638 | To compile this driver as a module, choose M here: the | |
639 | module will be called alim1535_wdt. | |
640 | ||
641 | Most people will say N. | |
642 | ||
643 | config ALIM7101_WDT | |
644 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 645 | depends on PCI |
1da177e4 LT |
646 | help |
647 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
648 | as used in the x86 Cobalt servers and also found in some |
649 | SPARC Netra servers too. | |
1da177e4 LT |
650 | |
651 | To compile this driver as a module, choose M here: the | |
652 | module will be called alim7101_wdt. | |
653 | ||
654 | Most people will say N. | |
655 | ||
96cb4eb0 | 656 | config F71808E_WDT |
e13752a1 | 657 | tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" |
e1926349 | 658 | depends on X86 |
96cb4eb0 GS |
659 | help |
660 | This is the driver for the hardware watchdog on the Fintek | |
e13752a1 | 661 | F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. |
96cb4eb0 GS |
662 | |
663 | You can compile this driver directly into the kernel, or use | |
664 | it as a module. The module will be called f71808e_wdt. | |
665 | ||
15e28bf1 PG |
666 | config SP5100_TCO |
667 | tristate "AMD/ATI SP5100 TCO Timer/Watchdog" | |
668 | depends on X86 && PCI | |
669 | ---help--- | |
670 | Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO | |
671 | (Total Cost of Ownership) timer is a watchdog timer that will reboot | |
672 | the machine after its expiration. The expiration time can be | |
673 | configured with the "heartbeat" parameter. | |
674 | ||
675 | To compile this driver as a module, choose M here: the | |
676 | module will be called sp5100_tco. | |
96cb4eb0 | 677 | |
0b36086b JC |
678 | config GEODE_WDT |
679 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
9b0fd114 | 680 | depends on CS5535_MFGPT |
0b36086b JC |
681 | help |
682 | This driver enables a watchdog capability built into the | |
683 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
684 | processors. This watchdog watches your kernel to make sure | |
685 | it doesn't freeze, and if it does, it reboots your computer after | |
686 | a certain amount of time. | |
687 | ||
688 | You can compile this driver directly into the kernel, or use | |
689 | it as a module. The module will be called geodewdt. | |
690 | ||
1da177e4 LT |
691 | config SC520_WDT |
692 | tristate "AMD Elan SC520 processor Watchdog" | |
6d956e42 | 693 | depends on MELAN |
1da177e4 LT |
694 | help |
695 | This is the driver for the hardware watchdog built in to the | |
696 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
697 | This watchdog simply watches your kernel to make sure it doesn't | |
698 | freeze, and if it does, it reboots your computer after a certain | |
699 | amount of time. | |
700 | ||
701 | You can compile this driver directly into the kernel, or use | |
702 | it as a module. The module will be called sc520_wdt. | |
703 | ||
3a5f9000 DT |
704 | config SBC_FITPC2_WATCHDOG |
705 | tristate "Compulab SBC-FITPC2 watchdog" | |
706 | depends on X86 | |
707 | ---help--- | |
ef39a1bf DT |
708 | This is the driver for the built-in watchdog timer on the fit-PC2, |
709 | fit-PC2i, CM-iAM single-board computers made by Compulab. | |
3a5f9000 DT |
710 | |
711 | It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. | |
712 | When "Watchdog Timer Value" enabled one can set 31-255 s operational range. | |
713 | ||
714 | Entering BIOS setup temporary disables watchdog operation regardless to current state, | |
715 | so system will not be restarted while user in BIOS setup. | |
716 | ||
717 | Once watchdog was enabled the system will be restarted every | |
718 | "Watchdog Timer Value" period, so to prevent it user can restart or | |
719 | disable the watchdog. | |
720 | ||
721 | To compile this driver as a module, choose M here: the | |
722 | module will be called sbc_fitpc2_wdt. | |
723 | ||
724 | Most people will say N. | |
725 | ||
1da177e4 LT |
726 | config EUROTECH_WDT |
727 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 728 | depends on X86 |
1da177e4 LT |
729 | help |
730 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
731 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
732 | information are at <http://www.eurotech.it/>. | |
733 | ||
734 | config IB700_WDT | |
735 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 736 | depends on X86 |
1da177e4 LT |
737 | ---help--- |
738 | This is the driver for the hardware watchdog on the IB700 Single | |
739 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
740 | simply watches your kernel to make sure it doesn't freeze, and if | |
741 | it does, it reboots your computer after a certain amount of time. | |
742 | ||
743 | This driver is like the WDT501 driver but for slightly different hardware. | |
744 | ||
745 | To compile this driver as a module, choose M here: the | |
746 | module will be called ib700wdt. | |
747 | ||
748 | Most people will say N. | |
749 | ||
d532134d | 750 | config IBMASR |
c310e2b9 | 751 | tristate "IBM Automatic Server Restart" |
261259b2 | 752 | depends on X86 |
c310e2b9 | 753 | help |
d532134d | 754 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 755 | timer built-in into some eServer xSeries machines. |
d532134d AP |
756 | |
757 | To compile this driver as a module, choose M here: the | |
758 | module will be called ibmasr. | |
759 | ||
1da177e4 | 760 | config WAFER_WDT |
01ed08c1 | 761 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 762 | depends on X86 |
1da177e4 | 763 | help |
01ed08c1 VS |
764 | This is a driver for the hardware watchdog on the ICP Single |
765 | Board Computer. This driver is working on (at least) the following | |
766 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
767 | |
768 | To compile this driver as a module, choose M here: the | |
769 | module will be called wafer5823wdt. | |
770 | ||
cc90ef0f DH |
771 | config I6300ESB_WDT |
772 | tristate "Intel 6300ESB Timer/Watchdog" | |
7050bd54 | 773 | depends on PCI |
cc90ef0f DH |
774 | ---help--- |
775 | Hardware driver for the watchdog timer built into the Intel | |
776 | 6300ESB controller hub. | |
777 | ||
778 | To compile this driver as a module, choose M here: the | |
779 | module will be called i6300esb. | |
780 | ||
101ce87b AS |
781 | config IE6XX_WDT |
782 | tristate "Intel Atom E6xx Watchdog" | |
783 | depends on X86 && PCI | |
784 | select WATCHDOG_CORE | |
785 | select MFD_CORE | |
786 | select LPC_SCH | |
787 | ---help--- | |
788 | Hardware driver for the watchdog timer built into the Intel | |
789 | Atom E6XX (TunnelCreek) processor. | |
790 | ||
791 | To compile this driver as a module, choose M here: the | |
792 | module will be called ie6xx_wdt. | |
793 | ||
57539c1c DJ |
794 | config INTEL_SCU_WATCHDOG |
795 | bool "Intel SCU Watchdog for Mobile Platforms" | |
d1ec74ab | 796 | depends on X86_INTEL_MID |
57539c1c DJ |
797 | ---help--- |
798 | Hardware driver for the watchdog time built into the Intel SCU | |
799 | for Intel Mobile Platforms. | |
800 | ||
801 | To compile this driver as a module, choose M here. | |
802 | ||
87a1ef80 DC |
803 | config INTEL_MID_WATCHDOG |
804 | tristate "Intel MID Watchdog Timer" | |
805 | depends on X86_INTEL_MID | |
806 | select WATCHDOG_CORE | |
807 | ---help--- | |
808 | Watchdog timer driver built into the Intel SCU for Intel MID | |
809 | Platforms. | |
810 | ||
811 | This driver currently supports only the watchdog evolution | |
812 | implementation in SCU, available for Merrifield generation. | |
813 | ||
814 | To compile this driver as a module, choose M here. | |
815 | ||
9e0ea345 | 816 | config ITCO_WDT |
cbf40d3f | 817 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 818 | depends on (X86 || IA64) && PCI |
bff23431 | 819 | select WATCHDOG_CORE |
3cef072d | 820 | depends on I2C || I2C=n |
2a7a0e9b | 821 | select LPC_ICH if !EXPERT |
3cef072d | 822 | select I2C_I801 if !EXPERT && I2C |
9e0ea345 WVS |
823 | ---help--- |
824 | Hardware driver for the intel TCO timer based watchdog devices. | |
825 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 826 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
827 | controller hub. |
828 | ||
829 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
830 | that will reboot the machine after its second expiration. The | |
831 | expiration time can be configured with the "heartbeat" parameter. | |
832 | ||
833 | On some motherboards the driver may fail to reset the chipset's | |
834 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
835 | machine. If this is the case you will get a kernel message like | |
836 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
837 | ||
838 | To compile this driver as a module, choose M here: the | |
839 | module will be called iTCO_wdt. | |
840 | ||
e033351d WVS |
841 | config ITCO_VENDOR_SUPPORT |
842 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
843 | depends on ITCO_WDT | |
844 | ---help--- | |
845 | Add vendor specific support to the intel TCO timer based watchdog | |
846 | devices. At this moment we only have additional support for some | |
847 | SuperMicro Inc. motherboards. | |
848 | ||
38ff6fd2 JBD |
849 | config IT8712F_WDT |
850 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
851 | depends on X86 | |
852 | ---help--- | |
853 | This is the driver for the built-in watchdog timer on the IT8712F | |
854 | Super I/0 chipset used on many motherboards. | |
855 | ||
4fc36808 WVS |
856 | If the driver does not work, then make sure that the game port in |
857 | the BIOS is enabled. | |
858 | ||
38ff6fd2 JBD |
859 | To compile this driver as a module, choose M here: the |
860 | module will be called it8712f_wdt. | |
861 | ||
e1fee94f OS |
862 | config IT87_WDT |
863 | tristate "IT87 Watchdog Timer" | |
e1926349 | 864 | depends on X86 |
e1fee94f | 865 | ---help--- |
dfb0b8ea | 866 | This is the driver for the hardware watchdog on the ITE IT8702, |
198ca015 DEP |
867 | IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728 |
868 | Super I/O chips. | |
869 | ||
870 | If the driver does not work, then make sure that the game port in | |
871 | the BIOS is enabled. | |
872 | ||
dfb0b8ea OZ |
873 | This watchdog simply watches your kernel to make sure it doesn't |
874 | freeze, and if it does, it reboots your computer after a certain | |
875 | amount of time. | |
e1fee94f OS |
876 | |
877 | To compile this driver as a module, choose M here: the module will | |
878 | be called it87_wdt. | |
879 | ||
7f4da474 | 880 | config HP_WATCHDOG |
ea6649c7 | 881 | tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" |
f71d26bb | 882 | depends on X86 && PCI |
7f4da474 TM |
883 | help |
884 | A software monitoring watchdog and NMI sourcing driver. This driver | |
86ded1f3 | 885 | will detect lockups and provide a stack trace. This is a driver that |
ea6649c7 | 886 | will only load on an HP ProLiant system with a minimum of iLO2 support. |
86ded1f3 | 887 | To compile this driver as a module, choose M here: the module will be |
888 | called hpwdt. | |
889 | ||
e51c288e KS |
890 | config KEMPLD_WDT |
891 | tristate "Kontron COM Watchdog Timer" | |
892 | depends on MFD_KEMPLD | |
893 | select WATCHDOG_CORE | |
894 | help | |
895 | Support for the PLD watchdog on some Kontron ETX and COMexpress | |
896 | (ETXexpress) modules | |
897 | ||
898 | This driver can also be built as a module. If so, the module will be | |
899 | called kempld_wdt. | |
900 | ||
86ded1f3 | 901 | config HPWDT_NMI_DECODING |
902 | bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" | |
903 | depends on HP_WATCHDOG | |
a4616153 | 904 | default y |
86ded1f3 | 905 | help |
906 | When an NMI occurs this feature will make the necessary BIOS calls to | |
907 | log the cause of the NMI. | |
7f4da474 | 908 | |
1da177e4 LT |
909 | config SC1200_WDT |
910 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 911 | depends on X86 |
1da177e4 LT |
912 | help |
913 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
914 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
915 | for power management purposes and can be used to power down the device | |
916 | during inactivity periods (includes interrupt activity monitoring). | |
917 | ||
918 | To compile this driver as a module, choose M here: the | |
919 | module will be called sc1200wdt. | |
920 | ||
921 | Most people will say N. | |
922 | ||
923 | config SCx200_WDT | |
924 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 925 | depends on SCx200 && PCI |
1da177e4 LT |
926 | help |
927 | Enable the built-in watchdog timer support on the National | |
928 | Semiconductor SCx200 processors. | |
929 | ||
930 | If compiled as a module, it will be called scx200_wdt. | |
931 | ||
789fc0ad SAMJ |
932 | config PC87413_WDT |
933 | tristate "NS PC87413 watchdog" | |
261259b2 | 934 | depends on X86 |
789fc0ad SAMJ |
935 | ---help--- |
936 | This is the driver for the hardware watchdog on the PC87413 chipset | |
937 | This watchdog simply watches your kernel to make sure it doesn't | |
938 | freeze, and if it does, it reboots your computer after a certain | |
939 | amount of time. | |
940 | ||
941 | To compile this driver as a module, choose M here: the | |
942 | module will be called pc87413_wdt. | |
943 | ||
944 | Most people will say N. | |
7944d3a5 | 945 | |
456c7301 MW |
946 | config NV_TCO |
947 | tristate "nVidia TCO Timer/Watchdog" | |
948 | depends on X86 && PCI | |
949 | ---help--- | |
950 | Hardware driver for the TCO timer built into the nVidia Hub family | |
951 | (such as the MCP51). The TCO (Total Cost of Ownership) timer is a | |
952 | watchdog timer that will reboot the machine after its second | |
953 | expiration. The expiration time can be configured with the | |
954 | "heartbeat" parameter. | |
955 | ||
956 | On some motherboards the driver may fail to reset the chipset's | |
957 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
958 | machine. If this is the case you will get a kernel message like | |
959 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
960 | ||
961 | To compile this driver as a module, choose M here: the | |
962 | module will be called nv_tco. | |
963 | ||
b3e8f2c1 FF |
964 | config RDC321X_WDT |
965 | tristate "RDC R-321x SoC watchdog" | |
966 | depends on X86_RDC321X | |
967 | help | |
968 | This is the driver for the built in hardware watchdog | |
969 | in the RDC R-321x SoC. | |
970 | ||
971 | To compile this driver as a module, choose M here: the | |
972 | module will be called rdc321x_wdt. | |
973 | ||
1da177e4 LT |
974 | config 60XX_WDT |
975 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 976 | depends on X86 |
1da177e4 LT |
977 | help |
978 | This driver can be used with the watchdog timer found on some | |
979 | single board computers, namely the 6010 PII based computer. | |
980 | It may well work with other cards. It reads port 0x443 to enable | |
981 | and re-set the watchdog timer, and reads port 0x45 to disable | |
982 | the watchdog. If you have a card that behave in similar ways, | |
983 | you can probably make this driver work with your card as well. | |
984 | ||
985 | You can compile this driver directly into the kernel, or use | |
986 | it as a module. The module will be called sbc60xxwdt. | |
987 | ||
3809ad38 IM |
988 | config SBC8360_WDT |
989 | tristate "SBC8360 Watchdog Timer" | |
1e8c8a5b | 990 | depends on X86_32 |
3809ad38 IM |
991 | ---help--- |
992 | ||
993 | This is the driver for the hardware watchdog on the SBC8360 Single | |
994 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
995 | ||
996 | To compile this driver as a module, choose M here: the | |
4737f097 | 997 | module will be called sbc8360. |
3809ad38 IM |
998 | |
999 | Most people will say N. | |
1000 | ||
c4c28335 GG |
1001 | config SBC7240_WDT |
1002 | tristate "SBC Nano 7240 Watchdog Timer" | |
3369465e | 1003 | depends on X86_32 && !UML |
c4c28335 GG |
1004 | ---help--- |
1005 | This is the driver for the hardware watchdog found on the IEI | |
1006 | single board computers EPIC Nano 7240 (and likely others). This | |
1007 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1008 | and if it does, it reboots your computer after a certain amount of | |
1009 | time. | |
1010 | ||
1011 | To compile this driver as a module, choose M here: the | |
1012 | module will be called sbc7240_wdt. | |
1013 | ||
1da177e4 LT |
1014 | config CPU5_WDT |
1015 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 1016 | depends on X86 |
1da177e4 LT |
1017 | ---help--- |
1018 | TBD. | |
1019 | To compile this driver as a module, choose M here: the | |
1020 | module will be called cpu5wdt. | |
1021 | ||
4c6e63bd WVS |
1022 | config SMSC_SCH311X_WDT |
1023 | tristate "SMSC SCH311X Watchdog Timer" | |
1024 | depends on X86 | |
1025 | ---help--- | |
1026 | This is the driver for the hardware watchdog timer on the | |
1027 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
1028 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
1029 | serial ports). | |
1030 | ||
1031 | To compile this driver as a module, choose M here: the | |
1032 | module will be called sch311x_wdt. | |
1033 | ||
485ae77d SA |
1034 | config SMSC37B787_WDT |
1035 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 1036 | depends on X86 |
485ae77d SA |
1037 | ---help--- |
1038 | This is the driver for the hardware watchdog component on the | |
1039 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
1040 | from Vision Systems and maybe others. | |
1041 | ||
1042 | This watchdog simply watches your kernel to make sure it doesn't | |
1043 | freeze, and if it does, it reboots your computer after a certain | |
1044 | amount of time. | |
1045 | ||
1046 | Usually a userspace daemon will notify the kernel WDT driver that | |
1047 | userspace is still alive, at regular intervals. | |
1048 | ||
1049 | To compile this driver as a module, choose M here: the | |
1050 | module will be called smsc37b787_wdt. | |
1051 | ||
1052 | Most people will say N. | |
1053 | ||
dc3c56b7 MV |
1054 | config VIA_WDT |
1055 | tristate "VIA Watchdog Timer" | |
690e7a70 | 1056 | depends on X86 && PCI |
dc3c56b7 MV |
1057 | select WATCHDOG_CORE |
1058 | ---help--- | |
1059 | This is the driver for the hardware watchdog timer on VIA | |
1060 | southbridge chipset CX700, VX800/VX820 or VX855/VX875. | |
1061 | ||
1062 | To compile this driver as a module, choose M here; the module | |
1063 | will be called via_wdt. | |
1064 | ||
1065 | Most people will say N. | |
1066 | ||
1da177e4 | 1067 | config W83627HF_WDT |
962c04f5 | 1068 | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" |
261259b2 | 1069 | depends on X86 |
30a83695 | 1070 | select WATCHDOG_CORE |
1da177e4 | 1071 | ---help--- |
962c04f5 GR |
1072 | This is the driver for the hardware watchdog on the following |
1073 | Super I/O chips. | |
1074 | W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG | |
1075 | W83637HF | |
1076 | W83667HG/HG-B | |
1077 | W83687THF | |
7b6d0b6a GR |
1078 | W83697HF |
1079 | W83697UG | |
962c04f5 GR |
1080 | NCT6775 |
1081 | NCT6776 | |
1082 | NCT6779 | |
a77841d5 GR |
1083 | NCT6791 |
1084 | NCT6792 | |
962c04f5 | 1085 | |
9c67bea4 BLA |
1086 | This watchdog simply watches your kernel to make sure it doesn't |
1087 | freeze, and if it does, it reboots your computer after a certain | |
1088 | amount of time. | |
1da177e4 LT |
1089 | |
1090 | To compile this driver as a module, choose M here: the | |
1091 | module will be called w83627hf_wdt. | |
1092 | ||
1093 | Most people will say N. | |
1094 | ||
1095 | config W83877F_WDT | |
1096 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 1097 | depends on X86 |
1da177e4 LT |
1098 | ---help--- |
1099 | This is the driver for the hardware watchdog on the W83877F chipset | |
1100 | as used in EMACS PC-104 motherboards (and likely others). This | |
1101 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1102 | and if it does, it reboots your computer after a certain amount of | |
1103 | time. | |
1104 | ||
1105 | To compile this driver as a module, choose M here: the | |
1106 | module will be called w83877f_wdt. | |
1107 | ||
1108 | Most people will say N. | |
1109 | ||
b4cc4aa2 JMG |
1110 | config W83977F_WDT |
1111 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 1112 | depends on X86 |
b4cc4aa2 JMG |
1113 | ---help--- |
1114 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
1115 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
1116 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1117 | and if it does, it reboots your computer after a certain amount of | |
1118 | time. | |
1119 | ||
1120 | To compile this driver as a module, choose M here: the | |
1121 | module will be called w83977f_wdt. | |
1122 | ||
1da177e4 LT |
1123 | config MACHZ_WDT |
1124 | tristate "ZF MachZ Watchdog" | |
261259b2 | 1125 | depends on X86 |
1da177e4 LT |
1126 | ---help--- |
1127 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 1128 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
1129 | processor using ZF-Logic interface. This watchdog simply watches |
1130 | your kernel to make sure it doesn't freeze, and if it does, it | |
1131 | reboots your computer after a certain amount of time. | |
1132 | ||
1133 | To compile this driver as a module, choose M here: the | |
1134 | module will be called machzwd. | |
1135 | ||
eed6565f CC |
1136 | config SBC_EPX_C3_WATCHDOG |
1137 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 1138 | depends on X86 |
eed6565f CC |
1139 | ---help--- |
1140 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
1141 | Single-board computer made by Winsystems, Inc. | |
1142 | ||
1143 | *Note*: This hardware watchdog is not probeable and thus there | |
1144 | is no way to know if writing to its IO address will corrupt | |
1145 | your system or have any real effect. The only way to be sure | |
1146 | that this driver does what you want is to make sure you | |
2621e2a1 | 1147 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
1148 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
1149 | IO ports. Basically, the assumption is made that if you compile | |
1150 | this driver into your kernel and/or load it as a module, that you | |
1151 | know what you are doing and that you are in fact running on an | |
1152 | EPX-C3 board! | |
1153 | ||
1154 | To compile this driver as a module, choose M here: the | |
1155 | module will be called sbc_epx_c3. | |
1156 | ||
c0e962f9 | 1157 | # M32R Architecture |
1da177e4 | 1158 | |
c0e962f9 WVS |
1159 | # M68K Architecture |
1160 | ||
4157a04d PDM |
1161 | config M54xx_WATCHDOG |
1162 | tristate "MCF54xx watchdog support" | |
88cce427 PDM |
1163 | depends on M548x |
1164 | help | |
1165 | To compile this driver as a module, choose M here: the | |
4157a04d | 1166 | module will be called m54xx_wdt. |
c0e962f9 | 1167 | |
e9659e69 AC |
1168 | # MicroBlaze Architecture |
1169 | ||
c0e962f9 WVS |
1170 | # MIPS Architecture |
1171 | ||
f8394f61 GJ |
1172 | config ATH79_WDT |
1173 | tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" | |
1174 | depends on ATH79 | |
1175 | help | |
1176 | Hardware driver for the built-in watchdog timer on the Atheros | |
1177 | AR71XX/AR724X/AR913X SoCs. | |
1178 | ||
90074dce | 1179 | config BCM47XX_WDT |
1180 | tristate "Broadcom BCM47xx Watchdog Timer" | |
94613431 | 1181 | depends on BCM47XX || ARCH_BCM_5301X |
5434a04d | 1182 | select WATCHDOG_CORE |
90074dce | 1183 | help |
6b2aac42 | 1184 | Hardware driver for the Broadcom BCM47xx Watchdog Timer. |
90074dce | 1185 | |
03ec5856 FF |
1186 | config RC32434_WDT |
1187 | tristate "IDT RC32434 SoC Watchdog Timer" | |
1188 | depends on MIKROTIK_RB532 | |
1189 | help | |
1190 | Hardware driver for the IDT RC32434 SoC built-in | |
1191 | watchdog timer. | |
1192 | ||
1193 | To compile this driver as a module, choose M here: the | |
1194 | module will be called rc32434_wdt. | |
1195 | ||
c0e962f9 WVS |
1196 | config INDYDOG |
1197 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 1198 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
1199 | help |
1200 | Hardware driver for the Indy's/I2's watchdog. This is a | |
1201 | watchdog timer that will reboot the machine after a 60 second | |
1202 | timer expired and no process has written to /dev/watchdog during | |
1203 | that time. | |
1204 | ||
f865c352 PC |
1205 | config JZ4740_WDT |
1206 | tristate "Ingenic jz4740 SoC hardware watchdog" | |
1207 | depends on MACH_JZ4740 | |
85f6df14 | 1208 | select WATCHDOG_CORE |
f865c352 PC |
1209 | help |
1210 | Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. | |
1211 | ||
c0e962f9 WVS |
1212 | config WDT_MTX1 |
1213 | tristate "MTX-1 Hardware Watchdog" | |
1214 | depends on MIPS_MTX1 | |
1215 | help | |
1216 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
1217 | will reboot the machine after a 100 seconds timer expired. | |
1218 | ||
33c050c5 DL |
1219 | config PNX833X_WDT |
1220 | tristate "PNX833x Hardware Watchdog" | |
1221 | depends on SOC_PNX8335 | |
1222 | help | |
1223 | Hardware driver for the PNX833x's watchdog. This is a | |
25985edc | 1224 | watchdog timer that will reboot the machine after a programmable |
33c050c5 DL |
1225 | timer has expired and no process has written to /dev/watchdog during |
1226 | that time. | |
1227 | ||
75c752e6 AS |
1228 | config SIBYTE_WDOG |
1229 | tristate "Sibyte SoC hardware watchdog" | |
1230 | depends on CPU_SB1 | |
1231 | help | |
1232 | Watchdog driver for the built in watchdog hardware in Sibyte | |
1233 | SoC processors. There are apparently two watchdog timers | |
1234 | on such processors; this driver supports only the first one, | |
1235 | because currently Linux only supports exporting one watchdog | |
1236 | to userspace. | |
1237 | ||
1238 | To compile this driver as a loadable module, choose M here. | |
1239 | The module will be called sb_wdog. | |
1240 | ||
c283cf2c MC |
1241 | config AR7_WDT |
1242 | tristate "TI AR7 Watchdog Timer" | |
1243 | depends on AR7 | |
1244 | help | |
1245 | Hardware driver for the TI AR7 Watchdog Timer. | |
1246 | ||
6f702fce AN |
1247 | config TXX9_WDT |
1248 | tristate "Toshiba TXx9 Watchdog Timer" | |
1249 | depends on CPU_TX39XX || CPU_TX49XX | |
d6245842 | 1250 | select WATCHDOG_CORE |
6f702fce AN |
1251 | help |
1252 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
1253 | ||
4c076fb4 DD |
1254 | config OCTEON_WDT |
1255 | tristate "Cavium OCTEON SOC family Watchdog Timer" | |
9ddebc46 | 1256 | depends on CAVIUM_OCTEON_SOC |
4c076fb4 | 1257 | default y |
3d588c93 | 1258 | select WATCHDOG_CORE |
4c076fb4 DD |
1259 | select EXPORT_UASM if OCTEON_WDT = m |
1260 | help | |
1261 | Hardware driver for OCTEON's on chip watchdog timer. | |
1262 | Enables the watchdog for all cores running Linux. It | |
1263 | installs a NMI handler and pokes the watchdog based on an | |
1264 | interrupt. On first expiration of the watchdog, the | |
1265 | interrupt handler pokes it. The second expiration causes an | |
1266 | NMI that prints a message. The third expiration causes a | |
1267 | global soft reset. | |
1268 | ||
1269 | When userspace has /dev/watchdog open, no poking is done | |
1270 | from the first interrupt, it is then only poked when the | |
1271 | device is written. | |
1272 | ||
b63aa731 FF |
1273 | config BCM63XX_WDT |
1274 | tristate "Broadcom BCM63xx hardware watchdog" | |
1275 | depends on BCM63XX | |
1276 | help | |
1277 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1278 | BCM63xx SoC. | |
1279 | ||
1280 | To compile this driver as a loadable module, choose M here. | |
1281 | The module will be called bcm63xx_wdt. | |
1282 | ||
938d0a84 LR |
1283 | config BCM2835_WDT |
1284 | tristate "Broadcom BCM2835 hardware watchdog" | |
1285 | depends on ARCH_BCM2835 | |
1286 | select WATCHDOG_CORE | |
1287 | help | |
1288 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1289 | BCM2835 SoC. | |
1290 | ||
1291 | To compile this driver as a loadable module, choose M here. | |
1292 | The module will be called bcm2835_wdt. | |
1293 | ||
6adb730d MM |
1294 | config BCM_KONA_WDT |
1295 | tristate "BCM Kona Watchdog" | |
5e82ec94 | 1296 | depends on ARCH_BCM_MOBILE |
6adb730d MM |
1297 | select WATCHDOG_CORE |
1298 | help | |
1299 | Support for the watchdog timer on the following Broadcom BCM281xx | |
1300 | family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and | |
1301 | BCM28155 variants. | |
1302 | ||
1303 | Say 'Y' or 'M' here to enable the driver. The module will be called | |
1304 | bcm_kona_wdt. | |
1305 | ||
6e2ac20e MM |
1306 | config BCM_KONA_WDT_DEBUG |
1307 | bool "DEBUGFS support for BCM Kona Watchdog" | |
1308 | depends on BCM_KONA_WDT | |
1309 | help | |
1310 | If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides | |
1311 | access to the driver's internal data structures as well as watchdog | |
1312 | timer hardware registres. | |
1313 | ||
1314 | If in doubt, say 'N'. | |
1315 | ||
7a3629fe JC |
1316 | config BCM7038_WDT |
1317 | tristate "BCM7038 Watchdog" | |
1318 | select WATCHDOG_CORE | |
1319 | help | |
1320 | Watchdog driver for the built-in hardware in Broadcom 7038 SoCs. | |
1321 | ||
1322 | Say 'Y or 'M' here to enable the driver. | |
1323 | ||
93937669 NT |
1324 | config IMGPDC_WDT |
1325 | tristate "Imagination Technologies PDC Watchdog Timer" | |
1326 | depends on HAS_IOMEM | |
1327 | depends on METAG || MIPS || COMPILE_TEST | |
1328 | help | |
1329 | Driver for Imagination Technologies PowerDown Controller | |
1330 | Watchdog Timer. | |
1331 | ||
1332 | To compile this driver as a loadable module, choose M here. | |
1333 | The module will be called imgpdc_wdt. | |
1334 | ||
2f58b8d0 JC |
1335 | config LANTIQ_WDT |
1336 | tristate "Lantiq SoC watchdog" | |
1337 | depends on LANTIQ | |
1338 | help | |
1339 | Hardware driver for the Lantiq SoC Watchdog Timer. | |
1340 | ||
473cf939 JC |
1341 | config RALINK_WDT |
1342 | tristate "Ralink SoC watchdog" | |
1343 | select WATCHDOG_CORE | |
1344 | depends on RALINK | |
1345 | help | |
1346 | Hardware driver for the Ralink SoC Watchdog Timer. | |
1347 | ||
c0e962f9 WVS |
1348 | # PARISC Architecture |
1349 | ||
1350 | # POWERPC Architecture | |
1da177e4 | 1351 | |
3268b561 | 1352 | config GEF_WDT |
cda61c94 | 1353 | tristate "GE Watchdog Timer" |
330bbf48 | 1354 | depends on GE_FPGA |
3268b561 | 1355 | ---help--- |
cda61c94 | 1356 | Watchdog timer found in a number of GE single board computers. |
3268b561 | 1357 | |
8cf18971 | 1358 | config MPC5200_WDT |
6d535599 | 1359 | bool "MPC52xx Watchdog Timer" |
8cf18971 | 1360 | depends on PPC_MPC52xx |
6d535599 AD |
1361 | help |
1362 | Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. | |
8cf18971 | 1363 | |
28acd02f AV |
1364 | config 8xxx_WDT |
1365 | tristate "MPC8xxx Platform Watchdog Timer" | |
f8c33e97 | 1366 | depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x |
d5cfaf0a | 1367 | select WATCHDOG_CORE |
28acd02f AV |
1368 | help |
1369 | This driver is for a SoC level watchdog that exists on some | |
1370 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 1371 | - MPC8xx watchdogs |
28acd02f AV |
1372 | - MPC83xx watchdogs |
1373 | - MPC86xx watchdogs | |
1374 | ||
1375 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 1376 | |
3be10211 JC |
1377 | config MV64X60_WDT |
1378 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 1379 | depends on MV64X60 |
3be10211 | 1380 | |
618efba9 SM |
1381 | config PIKA_WDT |
1382 | tristate "PIKA FPGA Watchdog" | |
1383 | depends on WARP | |
1384 | default y | |
1385 | help | |
1386 | This enables the watchdog in the PIKA FPGA. Currently used on | |
1387 | the Warp platform. | |
1388 | ||
a2f40ccd | 1389 | config BOOKE_WDT |
fbdd7144 | 1390 | tristate "PowerPC Book-E Watchdog Timer" |
261259b2 | 1391 | depends on BOOKE || 4xx |
52e5cc4e | 1392 | select WATCHDOG_CORE |
39cdc4bf | 1393 | ---help--- |
fbdd7144 TT |
1394 | Watchdog driver for PowerPC Book-E chips, such as the Freescale |
1395 | MPC85xx SOCs and the IBM PowerPC 440. | |
1396 | ||
39cdc4bf KG |
1397 | Please see Documentation/watchdog/watchdog-api.txt for |
1398 | more information. | |
a2f40ccd | 1399 | |
e0dc09ff TT |
1400 | config BOOKE_WDT_DEFAULT_TIMEOUT |
1401 | int "PowerPC Book-E Watchdog Timer Default Timeout" | |
1402 | depends on BOOKE_WDT | |
be0884ce SX |
1403 | default 38 if PPC_FSL_BOOK3E |
1404 | range 0 63 if PPC_FSL_BOOK3E | |
1405 | default 3 if !PPC_FSL_BOOK3E | |
1406 | range 0 3 if !PPC_FSL_BOOK3E | |
e0dc09ff TT |
1407 | help |
1408 | Select the default watchdog timer period to be used by the PowerPC | |
1409 | Book-E watchdog driver. A watchdog "event" occurs when the bit | |
1410 | position represented by this number transitions from zero to one. | |
1411 | ||
1412 | For Freescale Book-E processors, this is a number between 0 and 63. | |
1413 | For other Book-E processors, this is a number between 0 and 3. | |
1414 | ||
e1d1d68a | 1415 | The value can be overridden by the wdt_period command-line parameter. |
e0dc09ff | 1416 | |
26c57ef1 JT |
1417 | config MEN_A21_WDT |
1418 | tristate "MEN A21 VME CPU Carrier Board Watchdog Timer" | |
1419 | select WATCHDOG_CORE | |
21a926a3 | 1420 | depends on GPIOLIB || COMPILE_TEST |
26c57ef1 JT |
1421 | help |
1422 | Watchdog driver for MEN A21 VMEbus CPU Carrier Boards. | |
1423 | ||
1424 | The driver can also be built as a module. If so, the module will be | |
1425 | called mena21_wdt. | |
1426 | ||
1427 | If unsure select N here. | |
1428 | ||
180536f8 WVS |
1429 | # PPC64 Architecture |
1430 | ||
1431 | config WATCHDOG_RTAS | |
1432 | tristate "RTAS watchdog" | |
261259b2 | 1433 | depends on PPC_RTAS |
180536f8 WVS |
1434 | help |
1435 | This driver adds watchdog support for the RTAS watchdog. | |
1436 | ||
c310e2b9 | 1437 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
1438 | will be called wdrtas. |
1439 | ||
1da177e4 LT |
1440 | # S390 Architecture |
1441 | ||
f7a94db4 PH |
1442 | config DIAG288_WATCHDOG |
1443 | tristate "System z diag288 Watchdog" | |
261259b2 | 1444 | depends on S390 |
f7a94db4 | 1445 | select WATCHDOG_CORE |
1da177e4 LT |
1446 | help |
1447 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
1448 | provide a virtual watchdog timer to their guest that cause a | |
1449 | user define Control Program command to be executed after a | |
1450 | timeout. | |
646f919e PH |
1451 | LPAR provides a very similar interface. This driver handles |
1452 | both. | |
1da177e4 LT |
1453 | |
1454 | To compile this driver as a module, choose M here. The module | |
a8fa3943 | 1455 | will be called diag288_wdt. |
1da177e4 | 1456 | |
c0e962f9 | 1457 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
1458 | |
1459 | config SH_WDT | |
1460 | tristate "SuperH Watchdog" | |
d0afa579 | 1461 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1950f499 | 1462 | select WATCHDOG_CORE |
1da177e4 LT |
1463 | help |
1464 | This driver adds watchdog support for the integrated watchdog in the | |
1465 | SuperH processors. If you have one of these processors and wish | |
1466 | to have watchdog support enabled, say Y, otherwise say N. | |
1467 | ||
1468 | As a side note, saying Y here will automatically boost HZ to 1000 | |
1469 | so that the timer has a chance to clear the overflow counter. On | |
1470 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
1471 | some performance issues. As such, the WDT should be avoided here | |
1472 | unless it is absolutely necessary. | |
1473 | ||
1474 | To compile this driver as a module, choose M here: the | |
1475 | module will be called shwdt. | |
1476 | ||
c0e962f9 WVS |
1477 | # SPARC Architecture |
1478 | ||
1da177e4 LT |
1479 | # SPARC64 Architecture |
1480 | ||
1481 | config WATCHDOG_CP1XXX | |
1482 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 1483 | depends on SPARC64 && PCI |
1da177e4 LT |
1484 | ---help--- |
1485 | This is the driver for the hardware watchdog timers present on | |
1486 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
1487 | ||
1488 | To compile this driver as a module, choose M here: the | |
1489 | module will be called cpwatchdog. | |
1490 | ||
1491 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
1492 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
1493 | you should say N to this option. | |
1494 | ||
1495 | config WATCHDOG_RIO | |
1496 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 1497 | depends on SPARC64 && PCI |
1da177e4 LT |
1498 | help |
1499 | Say Y here to support the hardware watchdog capability on Sun RIO | |
1500 | machines. The watchdog timeout period is normally one minute but | |
1501 | can be changed with a boot-time parameter. | |
1502 | ||
c0e962f9 WVS |
1503 | # XTENSA Architecture |
1504 | ||
066d6c7f JB |
1505 | # Xen Architecture |
1506 | ||
1507 | config XEN_WDT | |
1508 | tristate "Xen Watchdog support" | |
1509 | depends on XEN | |
1510 | help | |
1511 | Say Y here to support the hypervisor watchdog capability provided | |
1512 | by Xen 4.0 and newer. The watchdog timeout period is normally one | |
1513 | minute but can be changed with a boot-time parameter. | |
1514 | ||
d805a786 AV |
1515 | config UML_WATCHDOG |
1516 | tristate "UML watchdog" | |
1517 | depends on UML | |
1518 | ||
1da177e4 LT |
1519 | # |
1520 | # ISA-based Watchdog Cards | |
1521 | # | |
1522 | ||
1523 | comment "ISA-based Watchdog Cards" | |
261259b2 | 1524 | depends on ISA |
1da177e4 LT |
1525 | |
1526 | config PCWATCHDOG | |
1527 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 1528 | depends on ISA |
1da177e4 LT |
1529 | ---help--- |
1530 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
1531 | This card simply watches your kernel to make sure it doesn't freeze, | |
1532 | and if it does, it reboots your computer after a certain amount of | |
1533 | time. This driver is like the WDT501 driver but for different | |
1534 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
1535 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
1536 | ||
1537 | To compile this driver as a module, choose M here: the | |
1538 | module will be called pcwd. | |
1539 | ||
1540 | Most people will say N. | |
1541 | ||
1542 | config MIXCOMWD | |
1543 | tristate "Mixcom Watchdog" | |
261259b2 | 1544 | depends on ISA |
1da177e4 LT |
1545 | ---help--- |
1546 | This is a driver for the Mixcom hardware watchdog cards. This | |
1547 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1548 | and if it does, it reboots your computer after a certain amount of | |
1549 | time. | |
1550 | ||
1551 | To compile this driver as a module, choose M here: the | |
1552 | module will be called mixcomwd. | |
1553 | ||
1554 | Most people will say N. | |
1555 | ||
1556 | config WDT | |
1557 | tristate "WDT Watchdog timer" | |
261259b2 | 1558 | depends on ISA |
1da177e4 LT |
1559 | ---help--- |
1560 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
1561 | otherwise N. It is not possible to probe for this board, which means | |
1562 | that you have to inform the kernel about the IO port and IRQ that | |
1563 | is needed (you can do this via the io and irq parameters) | |
1564 | ||
1565 | To compile this driver as a module, choose M here: the | |
1566 | module will be called wdt. | |
1567 | ||
1da177e4 LT |
1568 | # |
1569 | # PCI-based Watchdog Cards | |
1570 | # | |
1571 | ||
1572 | comment "PCI-based Watchdog Cards" | |
261259b2 | 1573 | depends on PCI |
1da177e4 LT |
1574 | |
1575 | config PCIPCWATCHDOG | |
1576 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 1577 | depends on PCI |
1da177e4 LT |
1578 | ---help--- |
1579 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
1580 | This card simply watches your kernel to make sure it doesn't freeze, | |
1581 | and if it does, it reboots your computer after a certain amount of | |
1582 | time. The card can also monitor the internal temperature of the PC. | |
1583 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
1584 | ||
1585 | To compile this driver as a module, choose M here: the | |
1586 | module will be called pcwd_pci. | |
1587 | ||
1588 | Most people will say N. | |
1589 | ||
1590 | config WDTPCI | |
1591 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 1592 | depends on PCI |
1da177e4 LT |
1593 | ---help--- |
1594 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
1595 | ||
9b901ee0 WVS |
1596 | If you have a PCI-WDT501 watchdog board then you can enable the |
1597 | temperature sensor by setting the type parameter to 501. | |
1da177e4 LT |
1598 | |
1599 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1600 | can do this via the tachometer parameter. Only do this if you have a | |
1601 | fan tachometer actually set up. | |
1602 | ||
9b901ee0 WVS |
1603 | To compile this driver as a module, choose M here: the |
1604 | module will be called wdt_pci. | |
1605 | ||
1da177e4 LT |
1606 | # |
1607 | # USB-based Watchdog Cards | |
1608 | # | |
1609 | ||
1610 | comment "USB-based Watchdog Cards" | |
261259b2 | 1611 | depends on USB |
1da177e4 LT |
1612 | |
1613 | config USBPCWATCHDOG | |
1614 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1615 | depends on USB |
1da177e4 LT |
1616 | ---help--- |
1617 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1618 | This card simply watches your kernel to make sure it doesn't freeze, | |
1619 | and if it does, it reboots your computer after a certain amount of | |
1620 | time. The card can also monitor the internal temperature of the PC. | |
1621 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1622 | ||
1623 | To compile this driver as a module, choose M here: the | |
1624 | module will be called pcwd_usb. | |
1625 | ||
1626 | Most people will say N. | |
1627 | ||
261259b2 | 1628 | endif # WATCHDOG |