Commit | Line | Data |
---|---|---|
5e53c8ed | 1 | |
1da177e4 LT |
2 | # |
3 | # Watchdog device configuration | |
4 | # | |
5 | ||
261259b2 | 6 | menuconfig WATCHDOG |
1da177e4 LT |
7 | bool "Watchdog Timer Support" |
8 | ---help--- | |
9 | If you say Y here (and to one of the following options) and create a | |
10 | character special file /dev/watchdog with major number 10 and minor | |
11 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
12 | subsequently opening the file and then failing to write to it for | |
13 | longer than 1 minute will result in rebooting the machine. This | |
14 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 15 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
16 | implementation entirely in software (which can sometimes fail to |
17 | reboot the machine) and a driver for hardware watchdog boards, which | |
18 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
19 | your computer. For details, read |
20 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
21 | |
22 | The watchdog is usually used together with the watchdog daemon | |
23 | which is available from | |
24 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
25 | also monitor NFS connections and can reboot the machine when the process | |
26 | table is full. | |
27 | ||
28 | If unsure, say N. | |
29 | ||
261259b2 JE |
30 | if WATCHDOG |
31 | ||
43316044 WVS |
32 | config WATCHDOG_CORE |
33 | bool "WatchDog Timer Driver Core" | |
34 | ---help--- | |
35 | Say Y here if you want to use the new watchdog timer driver core. | |
36 | This driver provides a framework for all watchdog timer drivers | |
37 | and gives them the /dev/watchdog interface (and later also the | |
38 | sysfs interface). | |
39 | ||
1da177e4 LT |
40 | config WATCHDOG_NOWAYOUT |
41 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
42 | help |
43 | The default watchdog behaviour (which you get if you say N here) is | |
44 | to stop the timer if the process managing it closes the file | |
45 | /dev/watchdog. It's always remotely possible that this process might | |
46 | get killed. If you say Y here, the watchdog cannot be stopped once | |
47 | it has been started. | |
48 | ||
33b71126 PA |
49 | config WATCHDOG_SYSFS |
50 | bool "Read different watchdog information through sysfs" | |
51 | default n | |
52 | help | |
53 | Say Y here if you want to enable watchdog device status read through | |
54 | sysfs attributes. | |
55 | ||
1da177e4 LT |
56 | # |
57 | # General Watchdog drivers | |
58 | # | |
59 | ||
60 | comment "Watchdog Device Drivers" | |
1da177e4 | 61 | |
2621e2a1 | 62 | # Architecture Independent |
1da177e4 LT |
63 | |
64 | config SOFT_WATCHDOG | |
65 | tristate "Software watchdog" | |
a5132caf | 66 | select WATCHDOG_CORE |
1da177e4 LT |
67 | help |
68 | A software monitoring watchdog. This will fail to reboot your system | |
69 | from some situations that the hardware watchdog will recover | |
70 | from. Equally it's a lot cheaper to install. | |
71 | ||
72 | To compile this driver as a module, choose M here: the | |
73 | module will be called softdog. | |
74 | ||
664a0d78 AJ |
75 | config DA9052_WATCHDOG |
76 | tristate "Dialog DA9052 Watchdog" | |
77 | depends on PMIC_DA9052 | |
78 | select WATCHDOG_CORE | |
79 | help | |
80 | Support for the watchdog in the DA9052 PMIC. Watchdog trigger | |
81 | cause system reset. | |
82 | ||
83 | Say Y here to include support for the DA9052 watchdog. | |
84 | Alternatively say M to compile the driver as a module, | |
85 | which will be called da9052_wdt. | |
86 | ||
312b00e1 AJ |
87 | config DA9055_WATCHDOG |
88 | tristate "Dialog Semiconductor DA9055 Watchdog" | |
89 | depends on MFD_DA9055 | |
12a5c05c | 90 | select WATCHDOG_CORE |
312b00e1 AJ |
91 | help |
92 | If you say yes here you get support for watchdog on the Dialog | |
93 | Semiconductor DA9055 PMIC. | |
94 | ||
95 | This driver can also be built as a module. If so, the module | |
96 | will be called da9055_wdt. | |
97 | ||
5e9c16e3 KG |
98 | config DA9063_WATCHDOG |
99 | tristate "Dialog DA9063 Watchdog" | |
100 | depends on MFD_DA9063 | |
101 | select WATCHDOG_CORE | |
102 | help | |
103 | Support for the watchdog in the DA9063 PMIC. | |
104 | ||
105 | This driver can be built as a module. The module name is da9063_wdt. | |
106 | ||
7a7cb009 T |
107 | config DA9062_WATCHDOG |
108 | tristate "Dialog DA9062 Watchdog" | |
109 | depends on MFD_DA9062 | |
110 | select WATCHDOG_CORE | |
111 | help | |
112 | Support for the watchdog in the DA9062 PMIC. | |
113 | ||
114 | This driver can be built as a module. The module name is da9062_wdt. | |
115 | ||
25134eaf AS |
116 | config GPIO_WATCHDOG |
117 | tristate "Watchdog device controlled through GPIO-line" | |
118 | depends on OF_GPIO | |
119 | select WATCHDOG_CORE | |
120 | help | |
121 | If you say yes here you get support for watchdog device | |
122 | controlled through GPIO-line. | |
123 | ||
5e53c8ed JBT |
124 | config GPIO_WATCHDOG_ARCH_INITCALL |
125 | bool "Register the watchdog as early as possible" | |
126 | depends on GPIO_WATCHDOG=y | |
127 | help | |
128 | In some situations, the default initcall level (module_init) | |
129 | in not early enough in the boot process to avoid the watchdog | |
130 | to be triggered. | |
131 | If you say yes here, the initcall level would be raised to | |
132 | arch_initcall. | |
133 | If in doubt, say N. | |
134 | ||
50332639 AW |
135 | config MENF21BMC_WATCHDOG |
136 | tristate "MEN 14F021P00 BMC Watchdog" | |
137 | depends on MFD_MENF21BMC | |
138 | select WATCHDOG_CORE | |
139 | help | |
140 | Say Y here to include support for the MEN 14F021P00 BMC Watchdog. | |
141 | ||
142 | This driver can also be built as a module. If so the module | |
143 | will be called menf21bmc_wdt. | |
144 | ||
dca536c4 MR |
145 | config TANGOX_WATCHDOG |
146 | tristate "Sigma Designs SMP86xx/SMP87xx watchdog" | |
147 | select WATCHDOG_CORE | |
c75f6c5a | 148 | depends on ARCH_TANGO || COMPILE_TEST |
d42d6108 | 149 | depends on HAS_IOMEM |
dca536c4 MR |
150 | help |
151 | Support for the watchdog in Sigma Designs SMP86xx (tango3) | |
152 | and SMP87xx (tango4) family chips. | |
153 | ||
154 | This driver can be built as a module. The module name is tangox_wdt. | |
155 | ||
502a0106 MB |
156 | config WM831X_WATCHDOG |
157 | tristate "WM831x watchdog" | |
158 | depends on MFD_WM831X | |
00411ee9 | 159 | select WATCHDOG_CORE |
502a0106 MB |
160 | help |
161 | Support for the watchdog in the WM831x AudioPlus PMICs. When | |
162 | the watchdog triggers the system will be reset. | |
163 | ||
006948ba MB |
164 | config WM8350_WATCHDOG |
165 | tristate "WM8350 watchdog" | |
166 | depends on MFD_WM8350 | |
2e51d90f | 167 | select WATCHDOG_CORE |
006948ba MB |
168 | help |
169 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
170 | the watchdog triggers the system will be reset. | |
171 | ||
c9dcf9f2 MS |
172 | config XILINX_WATCHDOG |
173 | tristate "Xilinx Watchdog timer" | |
71fd380a | 174 | depends on HAS_IOMEM |
c9dcf9f2 MS |
175 | select WATCHDOG_CORE |
176 | help | |
177 | Watchdog driver for the xps_timebase_wdt ip core. | |
178 | ||
179 | To compile this driver as a module, choose M here: the | |
180 | module will be called of_xilinx_wdt. | |
181 | ||
2a7b753a MW |
182 | config ZIIRAVE_WATCHDOG |
183 | tristate "Zodiac RAVE Watchdog Timer" | |
184 | depends on I2C | |
185 | select WATCHDOG_CORE | |
186 | help | |
187 | Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog | |
188 | Processor. | |
189 | ||
190 | To compile this driver as a module, choose M here: the | |
191 | module will be called ziirave_wdt. | |
192 | ||
c0e962f9 WVS |
193 | # ALPHA Architecture |
194 | ||
1da177e4 LT |
195 | # ARM Architecture |
196 | ||
4a370278 VK |
197 | config ARM_SP805_WATCHDOG |
198 | tristate "ARM SP805 Watchdog" | |
e30722e4 | 199 | depends on (ARM || ARM64) && ARM_AMBA |
4a516539 | 200 | select WATCHDOG_CORE |
4a370278 VK |
201 | help |
202 | ARM Primecell SP805 Watchdog timer. This will reboot your system when | |
203 | the timeout is reached. | |
204 | ||
aae03dc9 OR |
205 | config ASM9260_WATCHDOG |
206 | tristate "Alphascale ASM9260 watchdog" | |
207 | depends on MACH_ASM9260 | |
208 | depends on OF | |
209 | select WATCHDOG_CORE | |
210 | select RESET_CONTROLLER | |
211 | help | |
212 | Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your | |
213 | system when the timeout is reached. | |
214 | ||
bdcff345 | 215 | config AT91RM9200_WATCHDOG |
853807fb | 216 | tristate "AT91RM9200 watchdog" |
8432f9e5 | 217 | depends on SOC_AT91RM9200 && MFD_SYSCON |
853807fb AV |
218 | help |
219 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
220 | system when the timeout is reached. | |
221 | ||
e6bb42e3 | 222 | config AT91SAM9X_WATCHDOG |
f0e625c1 | 223 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
ee72f18b | 224 | depends on ARCH_AT91 |
490ac7af | 225 | select WATCHDOG_CORE |
e6bb42e3 | 226 | help |
f0e625c1 AV |
227 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
228 | reboot your system when the timeout is reached. | |
e6bb42e3 | 229 | |
76534860 WY |
230 | config SAMA5D4_WATCHDOG |
231 | tristate "Atmel SAMA5D4 Watchdog Timer" | |
232 | depends on ARCH_AT91 | |
233 | select WATCHDOG_CORE | |
234 | help | |
235 | Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips. | |
236 | Its Watchdog Timer Mode Register can be written more than once. | |
237 | This will reboot your system when the timeout is reached. | |
238 | ||
58bf0164 HK |
239 | config CADENCE_WATCHDOG |
240 | tristate "Cadence Watchdog Timer" | |
6960d485 | 241 | depends on HAS_IOMEM |
58bf0164 HK |
242 | select WATCHDOG_CORE |
243 | help | |
244 | Say Y here if you want to include support for the watchdog | |
245 | timer in the Xilinx Zynq. | |
246 | ||
1da177e4 LT |
247 | config 21285_WATCHDOG |
248 | tristate "DC21285 watchdog" | |
261259b2 | 249 | depends on FOOTBRIDGE |
1da177e4 | 250 | help |
e0845bf4 | 251 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
252 | here if you wish to use this. Alternatively say M to compile the |
253 | driver as a module, which will be called wdt285. | |
254 | ||
255 | This driver does not work on all machines. In particular, early CATS | |
256 | boards have hardware problems that will cause the machine to simply | |
257 | lock up if the watchdog fires. | |
258 | ||
259 | "If in doubt, leave it out" - say N. | |
260 | ||
261 | config 977_WATCHDOG | |
262 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 263 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
264 | help |
265 | Say Y here to include support for the WB977 watchdog included in | |
266 | NetWinder machines. Alternatively say M to compile the driver as | |
267 | a module, which will be called wdt977. | |
268 | ||
269 | Not sure? It's safe to say N. | |
270 | ||
271 | config IXP4XX_WATCHDOG | |
272 | tristate "IXP4xx Watchdog" | |
261259b2 | 273 | depends on ARCH_IXP4XX |
1da177e4 LT |
274 | help |
275 | Say Y here if to include support for the watchdog timer | |
276 | in the Intel IXP4xx network processors. This driver can | |
277 | be built as a module by choosing M. The module will | |
278 | be called ixp4xx_wdt. | |
279 | ||
280 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
281 | which doesn't reset any peripherals. There are circumstances | |
282 | where the watchdog will fail to reset the board correctly | |
283 | (e.g., if the boot ROM is in an unreadable state). | |
284 | ||
285 | Say N if you are unsure. | |
286 | ||
ccb8f430 AV |
287 | config KS8695_WATCHDOG |
288 | tristate "KS8695 watchdog" | |
289 | depends on ARCH_KS8695 | |
290 | help | |
291 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
292 | system when the timeout is reached. | |
293 | ||
8740f71d BG |
294 | config HAVE_S3C2410_WATCHDOG |
295 | bool | |
296 | help | |
297 | This will include watchdog timer support for Samsung SoCs. If | |
298 | you want to include watchdog support for any machine, kindly | |
299 | select this in the respective mach-XXXX/Kconfig file. | |
300 | ||
1da177e4 LT |
301 | config S3C2410_WATCHDOG |
302 | tristate "S3C2410 Watchdog" | |
b130d5c2 | 303 | depends on HAVE_S3C2410_WATCHDOG |
25dc46e3 | 304 | select WATCHDOG_CORE |
4f1f653a | 305 | select MFD_SYSCON if ARCH_EXYNOS5 |
1da177e4 | 306 | help |
8740f71d BG |
307 | Watchdog timer block in the Samsung SoCs. This will reboot |
308 | the system when the timer expires with the watchdog enabled. | |
1da177e4 LT |
309 | |
310 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 311 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
312 | then watchdog intervals of over approximately 20seconds are |
313 | unavailable. | |
314 | ||
315 | The driver can be built as a module by choosing M, and will | |
316 | be called s3c2410_wdt | |
317 | ||
318 | config SA1100_WATCHDOG | |
319 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 320 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
321 | help |
322 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
323 | reboot your system when timeout is reached. | |
324 | ||
325 | NOTE: once enabled, this timer cannot be disabled. | |
326 | ||
327 | To compile this driver as a module, choose M here: the | |
328 | module will be called sa1100_wdt. | |
329 | ||
c9353ae1 JI |
330 | config DW_WATCHDOG |
331 | tristate "Synopsys DesignWare watchdog" | |
1ccfe6f9 | 332 | depends on HAS_IOMEM |
c9353ae1 JI |
333 | help |
334 | Say Y here if to include support for the Synopsys DesignWare | |
58a251f2 | 335 | watchdog timer found in many chips. |
c9353ae1 JI |
336 | To compile this driver as a module, choose M here: the |
337 | module will be called dw_wdt. | |
338 | ||
f52ac8fe AZ |
339 | config EP93XX_WATCHDOG |
340 | tristate "EP93xx Watchdog" | |
261259b2 | 341 | depends on ARCH_EP93XX |
e12a679d | 342 | select WATCHDOG_CORE |
f52ac8fe AZ |
343 | help |
344 | Say Y here if to include support for the watchdog timer | |
345 | embedded in the Cirrus Logic EP93xx family of devices. | |
346 | ||
347 | To compile this driver as a module, choose M here: the | |
348 | module will be called ep93xx_wdt. | |
349 | ||
7768a13c KS |
350 | config OMAP_WATCHDOG |
351 | tristate "OMAP Watchdog" | |
77165a48 | 352 | depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS |
67c0f554 | 353 | select WATCHDOG_CORE |
7768a13c | 354 | help |
77165a48 SS |
355 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' |
356 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. | |
7768a13c | 357 | |
9325fa36 | 358 | config PNX4008_WATCHDOG |
d684f05f RS |
359 | tristate "LPC32XX Watchdog" |
360 | depends on ARCH_LPC32XX | |
6b1e8386 | 361 | select WATCHDOG_CORE |
9325fa36 VW |
362 | help |
363 | Say Y here if to include support for the watchdog timer | |
d684f05f | 364 | in the LPC32XX processor. |
9325fa36 VW |
365 | This driver can be built as a module by choosing M. The module |
366 | will be called pnx4008_wdt. | |
367 | ||
368 | Say N if you are unsure. | |
369 | ||
70c14ff0 DW |
370 | config IOP_WATCHDOG |
371 | tristate "IOP Watchdog" | |
ec2e32ca | 372 | depends on ARCH_IOP13XX |
70c14ff0 DW |
373 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
374 | help | |
375 | Say Y here if to include support for the watchdog timer | |
376 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
377 | be built as a module by choosing M. The module will | |
378 | be called iop_wdt. | |
379 | ||
380 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
381 | affect both cores and the peripherals of the IOP. The ATU-X | |
382 | and/or ATUe configuration registers will remain intact, but if | |
383 | operating as an Root Complex and/or Central Resource, the PCI-X | |
384 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
385 | ||
7d831bf5 VB |
386 | config DAVINCI_WATCHDOG |
387 | tristate "DaVinci watchdog" | |
8832b200 | 388 | depends on ARCH_DAVINCI || ARCH_KEYSTONE |
f48f3cea | 389 | select WATCHDOG_CORE |
7d831bf5 VB |
390 | help |
391 | Say Y here if to include support for the watchdog timer | |
8832b200 | 392 | in the DaVinci DM644x/DM646x or Keystone processors. |
7d831bf5 VB |
393 | To compile this driver as a module, choose M here: the |
394 | module will be called davinci_wdt. | |
395 | ||
396 | NOTE: once enabled, this timer cannot be disabled. | |
397 | Say N if you are unsure. | |
398 | ||
3b937a7d NP |
399 | config ORION_WATCHDOG |
400 | tristate "Orion watchdog" | |
6da41613 | 401 | depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU |
0dd6e484 | 402 | select WATCHDOG_CORE |
22ac9232 SB |
403 | help |
404 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 405 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 406 | To compile this driver as a module, choose M here: the |
3b937a7d | 407 | module will be called orion_wdt. |
22ac9232 | 408 | |
22b1c841 BG |
409 | config RN5T618_WATCHDOG |
410 | tristate "Ricoh RN5T618 watchdog" | |
411 | depends on MFD_RN5T618 | |
412 | select WATCHDOG_CORE | |
413 | help | |
414 | If you say yes here you get support for watchdog on the Ricoh | |
415 | RN5T618 PMIC. | |
416 | ||
417 | This driver can also be built as a module. If so, the module | |
418 | will be called rn5t618_wdt. | |
419 | ||
d00680ed CC |
420 | config SUNXI_WATCHDOG |
421 | tristate "Allwinner SoCs watchdog support" | |
422 | depends on ARCH_SUNXI | |
423 | select WATCHDOG_CORE | |
424 | help | |
425 | Say Y here to include support for the watchdog timer | |
426 | in Allwinner SoCs. | |
427 | To compile this driver as a module, choose M here: the | |
428 | module will be called sunxi_wdt. | |
429 | ||
01480701 LW |
430 | config COH901327_WATCHDOG |
431 | bool "ST-Ericsson COH 901 327 watchdog" | |
432 | depends on ARCH_U300 | |
433 | default y if MACH_U300 | |
15b25701 | 434 | select WATCHDOG_CORE |
01480701 LW |
435 | help |
436 | Say Y here to include Watchdog timer support for the | |
437 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
438 | This watchdog is used to reset the system and thus cannot be | |
439 | compiled as a module. | |
440 | ||
80e45b1e TK |
441 | config TWL4030_WATCHDOG |
442 | tristate "TWL4030 Watchdog" | |
443 | depends on TWL4030_CORE | |
b2c4e4b2 | 444 | select WATCHDOG_CORE |
80e45b1e TK |
445 | help |
446 | Support for TI TWL4030 watchdog. Say 'Y' here to enable the | |
447 | watchdog timer support for TWL4030 chips. | |
448 | ||
de6303ab WS |
449 | config STMP3XXX_RTC_WATCHDOG |
450 | tristate "Freescale STMP3XXX & i.MX23/28 watchdog" | |
451 | depends on RTC_DRV_STMP | |
452 | select WATCHDOG_CORE | |
453 | help | |
454 | Say Y here to include support for the watchdog timer inside | |
455 | the RTC for the STMP37XX/378X or i.MX23/28 SoC. | |
456 | To compile this driver as a module, choose M here: the | |
457 | module will be called stmp3xxx_rtc_wdt. | |
458 | ||
0400e313 WZ |
459 | config NUC900_WATCHDOG |
460 | tristate "Nuvoton NUC900 watchdog" | |
461 | depends on ARCH_W90X900 | |
462 | help | |
463 | Say Y here if to include support for the watchdog timer | |
464 | for the Nuvoton NUC900 series SoCs. | |
465 | To compile this driver as a module, choose M here: the | |
466 | module will be called nuc900_wdt. | |
467 | ||
bf900639 DR |
468 | config TS4800_WATCHDOG |
469 | tristate "TS-4800 Watchdog" | |
470 | depends on HAS_IOMEM && OF | |
471 | select WATCHDOG_CORE | |
472 | select MFD_SYSCON | |
473 | help | |
474 | Technologic Systems TS-4800 has watchdog timer implemented in | |
475 | an external FPGA. Say Y here if you want to support for the | |
476 | watchdog timer on TS-4800 board. | |
477 | ||
c90bf2aa MW |
478 | config TS72XX_WATCHDOG |
479 | tristate "TS-72XX SBC Watchdog" | |
480 | depends on MACH_TS72XX | |
481 | help | |
482 | Technologic Systems TS-7200, TS-7250 and TS-7260 boards have | |
483 | watchdog timer implemented in a external CPLD chip. Say Y here | |
484 | if you want to support for the watchdog timer on TS-72XX boards. | |
485 | ||
486 | To compile this driver as a module, choose M here: the | |
487 | module will be called ts72xx_wdt. | |
488 | ||
5e803716 MZ |
489 | config MAX63XX_WATCHDOG |
490 | tristate "Max63xx watchdog" | |
04658449 | 491 | depends on HAS_IOMEM |
a0f36833 | 492 | select WATCHDOG_CORE |
5e803716 MZ |
493 | help |
494 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | |
495 | ||
bb2fd8a8 WS |
496 | config IMX2_WDT |
497 | tristate "IMX2+ Watchdog" | |
646251a5 | 498 | depends on ARCH_MXC || ARCH_LAYERSCAPE |
a7977003 | 499 | select REGMAP_MMIO |
faad5de0 | 500 | select WATCHDOG_CORE |
bb2fd8a8 WS |
501 | help |
502 | This is the driver for the hardware watchdog | |
503 | on the Freescale IMX2 and later processors. | |
504 | If you have one of these processors and wish to have | |
505 | watchdog support enabled, say Y, otherwise say N. | |
506 | ||
507 | To compile this driver as a module, choose M here: the | |
508 | module will be called imx2_wdt. | |
509 | ||
f0e5bd41 FB |
510 | config UX500_WATCHDOG |
511 | tristate "ST-Ericsson Ux500 watchdog" | |
512 | depends on MFD_DB8500_PRCMU | |
513 | select WATCHDOG_CORE | |
514 | default y | |
515 | help | |
516 | Say Y here to include Watchdog timer support for the watchdog | |
517 | existing in the prcmu of ST-Ericsson Ux500 series platforms. | |
518 | ||
519 | To compile this driver as a module, choose M here: the | |
520 | module will be called ux500_wdt. | |
521 | ||
3d3a6d18 AK |
522 | config RETU_WATCHDOG |
523 | tristate "Retu watchdog" | |
524 | depends on MFD_RETU | |
525 | select WATCHDOG_CORE | |
526 | help | |
527 | Retu watchdog driver for Nokia Internet Tablets (770, N800, | |
528 | N810). At least on N800 the watchdog cannot be disabled, so | |
529 | this driver is essential and you should enable it. | |
530 | ||
531 | To compile this driver as a module, choose M here: the | |
532 | module will be called retu_wdt. | |
533 | ||
e14538e0 JJ |
534 | config MOXART_WDT |
535 | tristate "MOXART watchdog" | |
536 | depends on ARCH_MOXART | |
537 | help | |
538 | Say Y here to include Watchdog timer support for the watchdog | |
539 | existing on the MOXA ART SoC series platforms. | |
540 | ||
541 | To compile this driver as a module, choose M here: the | |
542 | module will be called moxart_wdt. | |
543 | ||
f0fcbdbf XD |
544 | config SIRFSOC_WATCHDOG |
545 | tristate "SiRFSOC watchdog" | |
546 | depends on ARCH_SIRF | |
547 | select WATCHDOG_CORE | |
548 | default y | |
549 | help | |
550 | Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When | |
551 | the watchdog triggers the system will be reset. | |
552 | ||
f27925a6 LJ |
553 | config ST_LPC_WATCHDOG |
554 | tristate "STMicroelectronics LPC Watchdog" | |
555 | depends on ARCH_STI | |
556 | depends on OF | |
557 | select WATCHDOG_CORE | |
558 | help | |
559 | Say Y here to include STMicroelectronics Low Power Controller | |
560 | (LPC) based Watchdog timer support. | |
561 | ||
562 | To compile this driver as a module, choose M here: the | |
563 | module will be called st_lpc_wdt. | |
564 | ||
c33a1597 AC |
565 | config TEGRA_WATCHDOG |
566 | tristate "Tegra watchdog" | |
71fd380a | 567 | depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM |
c33a1597 AC |
568 | select WATCHDOG_CORE |
569 | help | |
570 | Say Y here to include support for the watchdog timer | |
571 | embedded in NVIDIA Tegra SoCs. | |
572 | ||
573 | To compile this driver as a module, choose M here: the | |
574 | module will be called tegra_wdt. | |
575 | ||
1094ebe9 JC |
576 | config QCOM_WDT |
577 | tristate "QCOM watchdog" | |
578 | depends on HAS_IOMEM | |
579 | depends on ARCH_QCOM | |
580 | select WATCHDOG_CORE | |
581 | help | |
582 | Say Y here to include Watchdog timer support for the watchdog found | |
583 | on QCOM chipsets. Currently supported targets are the MSM8960, | |
584 | APQ8064, and IPQ8064. | |
585 | ||
586 | To compile this driver as a module, choose M here: the | |
587 | module will be called qcom_wdt. | |
588 | ||
22e1b8f6 CC |
589 | config MESON_WATCHDOG |
590 | tristate "Amlogic Meson SoCs watchdog support" | |
591 | depends on ARCH_MESON | |
592 | select WATCHDOG_CORE | |
593 | help | |
594 | Say Y here to include support for the watchdog timer | |
595 | in Amlogic Meson SoCs. | |
596 | To compile this driver as a module, choose M here: the | |
597 | module will be called meson_wdt. | |
598 | ||
a44a4553 MB |
599 | config MEDIATEK_WATCHDOG |
600 | tristate "Mediatek SoCs watchdog support" | |
601 | depends on ARCH_MEDIATEK | |
602 | select WATCHDOG_CORE | |
603 | help | |
604 | Say Y here to include support for the watchdog timer | |
605 | in Mediatek SoCs. | |
606 | To compile this driver as a module, choose M here: the | |
607 | module will be called mtk_wdt. | |
608 | ||
336694a0 BS |
609 | config DIGICOLOR_WATCHDOG |
610 | tristate "Conexant Digicolor SoCs watchdog support" | |
611 | depends on ARCH_DIGICOLOR | |
612 | select WATCHDOG_CORE | |
613 | help | |
614 | Say Y here to include support for the watchdog timer | |
615 | in Conexant Digicolor SoCs. | |
616 | To compile this driver as a module, choose M here: the | |
617 | module will be called digicolor_wdt. | |
618 | ||
7c25f8c9 AA |
619 | config LPC18XX_WATCHDOG |
620 | tristate "LPC18xx/43xx Watchdog" | |
621 | depends on ARCH_LPC18XX || COMPILE_TEST | |
d42d6108 | 622 | depends on HAS_IOMEM |
7c25f8c9 AA |
623 | select WATCHDOG_CORE |
624 | help | |
625 | Say Y here if to include support for the watchdog timer | |
626 | in NXP LPC SoCs family, which includes LPC18xx/LPC43xx | |
627 | processors. | |
628 | To compile this driver as a module, choose M here: the | |
629 | module will be called lpc18xx_wdt. | |
630 | ||
b466ee89 GZ |
631 | config ATLAS7_WATCHDOG |
632 | tristate "CSRatlas7 watchdog" | |
633 | depends on ARCH_ATLAS7 | |
634 | help | |
635 | Say Y here to include Watchdog timer support for the watchdog | |
636 | existing on the CSRatlas7 series platforms. | |
637 | ||
638 | To compile this driver as a module, choose M here: the | |
639 | module will be called atlas7_wdt. | |
640 | ||
a9cb3959 HCE |
641 | # AVR32 Architecture |
642 | ||
643 | config AT32AP700X_WDT | |
644 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 645 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
646 | help |
647 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
648 | your system when the timeout is reached. | |
649 | ||
c0e962f9 | 650 | # BLACKFIN Architecture |
1e6d320f BW |
651 | |
652 | config BFIN_WDT | |
653 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 654 | depends on BLACKFIN |
1e6d320f BW |
655 | ---help--- |
656 | If you say yes here you will get support for the Blackfin On-Chip | |
657 | Watchdog Timer. If you have one of these processors and wish to | |
658 | have watchdog support enabled, say Y, otherwise say N. | |
659 | ||
660 | To compile this driver as a module, choose M here: the | |
661 | module will be called bfin_wdt. | |
662 | ||
c0e962f9 WVS |
663 | # CRIS Architecture |
664 | ||
665 | # FRV Architecture | |
666 | ||
1da177e4 LT |
667 | # X86 (i386 + ia64 + x86_64) Architecture |
668 | ||
669 | config ACQUIRE_WDT | |
670 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 671 | depends on X86 |
1da177e4 LT |
672 | ---help--- |
673 | This is the driver for the hardware watchdog on Single Board | |
674 | Computers produced by Acquire Inc (and others). This watchdog | |
675 | simply watches your kernel to make sure it doesn't freeze, and if | |
676 | it does, it reboots your computer after a certain amount of time. | |
677 | ||
678 | To compile this driver as a module, choose M here: the | |
679 | module will be called acquirewdt. | |
680 | ||
681 | Most people will say N. | |
682 | ||
683 | config ADVANTECH_WDT | |
684 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 685 | depends on X86 |
1da177e4 LT |
686 | help |
687 | If you are configuring a Linux kernel for the Advantech single-board | |
688 | computer, say `Y' here to support its built-in watchdog timer | |
689 | feature. More information can be found at | |
690 | <http://www.advantech.com.tw/products/> | |
691 | ||
692 | config ALIM1535_WDT | |
693 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 694 | depends on X86 && PCI |
1da177e4 LT |
695 | ---help--- |
696 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
697 | ||
698 | To compile this driver as a module, choose M here: the | |
699 | module will be called alim1535_wdt. | |
700 | ||
701 | Most people will say N. | |
702 | ||
703 | config ALIM7101_WDT | |
704 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 705 | depends on PCI |
1da177e4 LT |
706 | help |
707 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
708 | as used in the x86 Cobalt servers and also found in some |
709 | SPARC Netra servers too. | |
1da177e4 LT |
710 | |
711 | To compile this driver as a module, choose M here: the | |
712 | module will be called alim7101_wdt. | |
713 | ||
714 | Most people will say N. | |
715 | ||
96cb4eb0 | 716 | config F71808E_WDT |
e13752a1 | 717 | tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" |
e1926349 | 718 | depends on X86 |
96cb4eb0 GS |
719 | help |
720 | This is the driver for the hardware watchdog on the Fintek | |
e13752a1 | 721 | F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. |
96cb4eb0 GS |
722 | |
723 | You can compile this driver directly into the kernel, or use | |
724 | it as a module. The module will be called f71808e_wdt. | |
725 | ||
15e28bf1 PG |
726 | config SP5100_TCO |
727 | tristate "AMD/ATI SP5100 TCO Timer/Watchdog" | |
728 | depends on X86 && PCI | |
729 | ---help--- | |
730 | Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO | |
731 | (Total Cost of Ownership) timer is a watchdog timer that will reboot | |
732 | the machine after its expiration. The expiration time can be | |
733 | configured with the "heartbeat" parameter. | |
734 | ||
735 | To compile this driver as a module, choose M here: the | |
736 | module will be called sp5100_tco. | |
96cb4eb0 | 737 | |
0b36086b JC |
738 | config GEODE_WDT |
739 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
9b0fd114 | 740 | depends on CS5535_MFGPT |
0b36086b JC |
741 | help |
742 | This driver enables a watchdog capability built into the | |
743 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
744 | processors. This watchdog watches your kernel to make sure | |
745 | it doesn't freeze, and if it does, it reboots your computer after | |
746 | a certain amount of time. | |
747 | ||
748 | You can compile this driver directly into the kernel, or use | |
749 | it as a module. The module will be called geodewdt. | |
750 | ||
1da177e4 LT |
751 | config SC520_WDT |
752 | tristate "AMD Elan SC520 processor Watchdog" | |
6d956e42 | 753 | depends on MELAN |
1da177e4 LT |
754 | help |
755 | This is the driver for the hardware watchdog built in to the | |
756 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
757 | This watchdog simply watches your kernel to make sure it doesn't | |
758 | freeze, and if it does, it reboots your computer after a certain | |
759 | amount of time. | |
760 | ||
761 | You can compile this driver directly into the kernel, or use | |
762 | it as a module. The module will be called sc520_wdt. | |
763 | ||
3a5f9000 DT |
764 | config SBC_FITPC2_WATCHDOG |
765 | tristate "Compulab SBC-FITPC2 watchdog" | |
766 | depends on X86 | |
767 | ---help--- | |
ef39a1bf DT |
768 | This is the driver for the built-in watchdog timer on the fit-PC2, |
769 | fit-PC2i, CM-iAM single-board computers made by Compulab. | |
3a5f9000 DT |
770 | |
771 | It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. | |
772 | When "Watchdog Timer Value" enabled one can set 31-255 s operational range. | |
773 | ||
774 | Entering BIOS setup temporary disables watchdog operation regardless to current state, | |
775 | so system will not be restarted while user in BIOS setup. | |
776 | ||
777 | Once watchdog was enabled the system will be restarted every | |
778 | "Watchdog Timer Value" period, so to prevent it user can restart or | |
779 | disable the watchdog. | |
780 | ||
781 | To compile this driver as a module, choose M here: the | |
782 | module will be called sbc_fitpc2_wdt. | |
783 | ||
784 | Most people will say N. | |
785 | ||
1da177e4 LT |
786 | config EUROTECH_WDT |
787 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 788 | depends on X86 |
1da177e4 LT |
789 | help |
790 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
791 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
792 | information are at <http://www.eurotech.it/>. | |
793 | ||
794 | config IB700_WDT | |
795 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 796 | depends on X86 |
1da177e4 LT |
797 | ---help--- |
798 | This is the driver for the hardware watchdog on the IB700 Single | |
799 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
800 | simply watches your kernel to make sure it doesn't freeze, and if | |
801 | it does, it reboots your computer after a certain amount of time. | |
802 | ||
803 | This driver is like the WDT501 driver but for slightly different hardware. | |
804 | ||
805 | To compile this driver as a module, choose M here: the | |
806 | module will be called ib700wdt. | |
807 | ||
808 | Most people will say N. | |
809 | ||
d532134d | 810 | config IBMASR |
c310e2b9 | 811 | tristate "IBM Automatic Server Restart" |
261259b2 | 812 | depends on X86 |
c310e2b9 | 813 | help |
d532134d | 814 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 815 | timer built-in into some eServer xSeries machines. |
d532134d AP |
816 | |
817 | To compile this driver as a module, choose M here: the | |
818 | module will be called ibmasr. | |
819 | ||
1da177e4 | 820 | config WAFER_WDT |
01ed08c1 | 821 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 822 | depends on X86 |
1da177e4 | 823 | help |
01ed08c1 VS |
824 | This is a driver for the hardware watchdog on the ICP Single |
825 | Board Computer. This driver is working on (at least) the following | |
826 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
827 | |
828 | To compile this driver as a module, choose M here: the | |
829 | module will be called wafer5823wdt. | |
830 | ||
cc90ef0f DH |
831 | config I6300ESB_WDT |
832 | tristate "Intel 6300ESB Timer/Watchdog" | |
7050bd54 | 833 | depends on PCI |
cc90ef0f DH |
834 | ---help--- |
835 | Hardware driver for the watchdog timer built into the Intel | |
836 | 6300ESB controller hub. | |
837 | ||
838 | To compile this driver as a module, choose M here: the | |
839 | module will be called i6300esb. | |
840 | ||
101ce87b AS |
841 | config IE6XX_WDT |
842 | tristate "Intel Atom E6xx Watchdog" | |
843 | depends on X86 && PCI | |
844 | select WATCHDOG_CORE | |
845 | select MFD_CORE | |
846 | select LPC_SCH | |
847 | ---help--- | |
848 | Hardware driver for the watchdog timer built into the Intel | |
849 | Atom E6XX (TunnelCreek) processor. | |
850 | ||
851 | To compile this driver as a module, choose M here: the | |
852 | module will be called ie6xx_wdt. | |
853 | ||
57539c1c DJ |
854 | config INTEL_SCU_WATCHDOG |
855 | bool "Intel SCU Watchdog for Mobile Platforms" | |
d1ec74ab | 856 | depends on X86_INTEL_MID |
57539c1c DJ |
857 | ---help--- |
858 | Hardware driver for the watchdog time built into the Intel SCU | |
859 | for Intel Mobile Platforms. | |
860 | ||
861 | To compile this driver as a module, choose M here. | |
862 | ||
87a1ef80 DC |
863 | config INTEL_MID_WATCHDOG |
864 | tristate "Intel MID Watchdog Timer" | |
865 | depends on X86_INTEL_MID | |
866 | select WATCHDOG_CORE | |
867 | ---help--- | |
868 | Watchdog timer driver built into the Intel SCU for Intel MID | |
869 | Platforms. | |
870 | ||
871 | This driver currently supports only the watchdog evolution | |
872 | implementation in SCU, available for Merrifield generation. | |
873 | ||
874 | To compile this driver as a module, choose M here. | |
875 | ||
9e0ea345 | 876 | config ITCO_WDT |
cbf40d3f | 877 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 878 | depends on (X86 || IA64) && PCI |
bff23431 | 879 | select WATCHDOG_CORE |
3cef072d | 880 | depends on I2C || I2C=n |
2a7a0e9b | 881 | select LPC_ICH if !EXPERT |
3cef072d | 882 | select I2C_I801 if !EXPERT && I2C |
9e0ea345 WVS |
883 | ---help--- |
884 | Hardware driver for the intel TCO timer based watchdog devices. | |
885 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 886 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
887 | controller hub. |
888 | ||
889 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
890 | that will reboot the machine after its second expiration. The | |
891 | expiration time can be configured with the "heartbeat" parameter. | |
892 | ||
893 | On some motherboards the driver may fail to reset the chipset's | |
894 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
895 | machine. If this is the case you will get a kernel message like | |
896 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
897 | ||
898 | To compile this driver as a module, choose M here: the | |
899 | module will be called iTCO_wdt. | |
900 | ||
e033351d WVS |
901 | config ITCO_VENDOR_SUPPORT |
902 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
903 | depends on ITCO_WDT | |
904 | ---help--- | |
905 | Add vendor specific support to the intel TCO timer based watchdog | |
906 | devices. At this moment we only have additional support for some | |
907 | SuperMicro Inc. motherboards. | |
908 | ||
38ff6fd2 JBD |
909 | config IT8712F_WDT |
910 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
911 | depends on X86 | |
912 | ---help--- | |
913 | This is the driver for the built-in watchdog timer on the IT8712F | |
914 | Super I/0 chipset used on many motherboards. | |
915 | ||
4fc36808 WVS |
916 | If the driver does not work, then make sure that the game port in |
917 | the BIOS is enabled. | |
918 | ||
38ff6fd2 JBD |
919 | To compile this driver as a module, choose M here: the |
920 | module will be called it8712f_wdt. | |
921 | ||
e1fee94f OS |
922 | config IT87_WDT |
923 | tristate "IT87 Watchdog Timer" | |
e1926349 | 924 | depends on X86 |
e1fee94f | 925 | ---help--- |
dfb0b8ea | 926 | This is the driver for the hardware watchdog on the ITE IT8702, |
198ca015 DEP |
927 | IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728 |
928 | Super I/O chips. | |
929 | ||
930 | If the driver does not work, then make sure that the game port in | |
931 | the BIOS is enabled. | |
932 | ||
dfb0b8ea OZ |
933 | This watchdog simply watches your kernel to make sure it doesn't |
934 | freeze, and if it does, it reboots your computer after a certain | |
935 | amount of time. | |
e1fee94f OS |
936 | |
937 | To compile this driver as a module, choose M here: the module will | |
938 | be called it87_wdt. | |
939 | ||
7f4da474 | 940 | config HP_WATCHDOG |
ea6649c7 | 941 | tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" |
f71d26bb | 942 | depends on X86 && PCI |
7f4da474 TM |
943 | help |
944 | A software monitoring watchdog and NMI sourcing driver. This driver | |
86ded1f3 | 945 | will detect lockups and provide a stack trace. This is a driver that |
ea6649c7 | 946 | will only load on an HP ProLiant system with a minimum of iLO2 support. |
86ded1f3 | 947 | To compile this driver as a module, choose M here: the module will be |
948 | called hpwdt. | |
949 | ||
e51c288e KS |
950 | config KEMPLD_WDT |
951 | tristate "Kontron COM Watchdog Timer" | |
952 | depends on MFD_KEMPLD | |
953 | select WATCHDOG_CORE | |
954 | help | |
955 | Support for the PLD watchdog on some Kontron ETX and COMexpress | |
956 | (ETXexpress) modules | |
957 | ||
958 | This driver can also be built as a module. If so, the module will be | |
959 | called kempld_wdt. | |
960 | ||
86ded1f3 | 961 | config HPWDT_NMI_DECODING |
962 | bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" | |
963 | depends on HP_WATCHDOG | |
a4616153 | 964 | default y |
86ded1f3 | 965 | help |
966 | When an NMI occurs this feature will make the necessary BIOS calls to | |
967 | log the cause of the NMI. | |
7f4da474 | 968 | |
1da177e4 LT |
969 | config SC1200_WDT |
970 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 971 | depends on X86 |
1da177e4 LT |
972 | help |
973 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
974 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
975 | for power management purposes and can be used to power down the device | |
976 | during inactivity periods (includes interrupt activity monitoring). | |
977 | ||
978 | To compile this driver as a module, choose M here: the | |
979 | module will be called sc1200wdt. | |
980 | ||
981 | Most people will say N. | |
982 | ||
983 | config SCx200_WDT | |
984 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 985 | depends on SCx200 && PCI |
1da177e4 LT |
986 | help |
987 | Enable the built-in watchdog timer support on the National | |
988 | Semiconductor SCx200 processors. | |
989 | ||
990 | If compiled as a module, it will be called scx200_wdt. | |
991 | ||
789fc0ad SAMJ |
992 | config PC87413_WDT |
993 | tristate "NS PC87413 watchdog" | |
261259b2 | 994 | depends on X86 |
789fc0ad SAMJ |
995 | ---help--- |
996 | This is the driver for the hardware watchdog on the PC87413 chipset | |
997 | This watchdog simply watches your kernel to make sure it doesn't | |
998 | freeze, and if it does, it reboots your computer after a certain | |
999 | amount of time. | |
1000 | ||
1001 | To compile this driver as a module, choose M here: the | |
1002 | module will be called pc87413_wdt. | |
1003 | ||
1004 | Most people will say N. | |
7944d3a5 | 1005 | |
456c7301 MW |
1006 | config NV_TCO |
1007 | tristate "nVidia TCO Timer/Watchdog" | |
1008 | depends on X86 && PCI | |
1009 | ---help--- | |
1010 | Hardware driver for the TCO timer built into the nVidia Hub family | |
1011 | (such as the MCP51). The TCO (Total Cost of Ownership) timer is a | |
1012 | watchdog timer that will reboot the machine after its second | |
1013 | expiration. The expiration time can be configured with the | |
1014 | "heartbeat" parameter. | |
1015 | ||
1016 | On some motherboards the driver may fail to reset the chipset's | |
1017 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
1018 | machine. If this is the case you will get a kernel message like | |
1019 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
1020 | ||
1021 | To compile this driver as a module, choose M here: the | |
1022 | module will be called nv_tco. | |
1023 | ||
b3e8f2c1 FF |
1024 | config RDC321X_WDT |
1025 | tristate "RDC R-321x SoC watchdog" | |
1026 | depends on X86_RDC321X | |
1027 | help | |
1028 | This is the driver for the built in hardware watchdog | |
1029 | in the RDC R-321x SoC. | |
1030 | ||
1031 | To compile this driver as a module, choose M here: the | |
1032 | module will be called rdc321x_wdt. | |
1033 | ||
1da177e4 LT |
1034 | config 60XX_WDT |
1035 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 1036 | depends on X86 |
1da177e4 LT |
1037 | help |
1038 | This driver can be used with the watchdog timer found on some | |
1039 | single board computers, namely the 6010 PII based computer. | |
1040 | It may well work with other cards. It reads port 0x443 to enable | |
1041 | and re-set the watchdog timer, and reads port 0x45 to disable | |
1042 | the watchdog. If you have a card that behave in similar ways, | |
1043 | you can probably make this driver work with your card as well. | |
1044 | ||
1045 | You can compile this driver directly into the kernel, or use | |
1046 | it as a module. The module will be called sbc60xxwdt. | |
1047 | ||
3809ad38 IM |
1048 | config SBC8360_WDT |
1049 | tristate "SBC8360 Watchdog Timer" | |
1e8c8a5b | 1050 | depends on X86_32 |
3809ad38 IM |
1051 | ---help--- |
1052 | ||
1053 | This is the driver for the hardware watchdog on the SBC8360 Single | |
1054 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
1055 | ||
1056 | To compile this driver as a module, choose M here: the | |
4737f097 | 1057 | module will be called sbc8360. |
3809ad38 IM |
1058 | |
1059 | Most people will say N. | |
1060 | ||
c4c28335 GG |
1061 | config SBC7240_WDT |
1062 | tristate "SBC Nano 7240 Watchdog Timer" | |
3369465e | 1063 | depends on X86_32 && !UML |
c4c28335 GG |
1064 | ---help--- |
1065 | This is the driver for the hardware watchdog found on the IEI | |
1066 | single board computers EPIC Nano 7240 (and likely others). This | |
1067 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1068 | and if it does, it reboots your computer after a certain amount of | |
1069 | time. | |
1070 | ||
1071 | To compile this driver as a module, choose M here: the | |
1072 | module will be called sbc7240_wdt. | |
1073 | ||
1da177e4 LT |
1074 | config CPU5_WDT |
1075 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 1076 | depends on X86 |
1da177e4 LT |
1077 | ---help--- |
1078 | TBD. | |
1079 | To compile this driver as a module, choose M here: the | |
1080 | module will be called cpu5wdt. | |
1081 | ||
4c6e63bd WVS |
1082 | config SMSC_SCH311X_WDT |
1083 | tristate "SMSC SCH311X Watchdog Timer" | |
1084 | depends on X86 | |
1085 | ---help--- | |
1086 | This is the driver for the hardware watchdog timer on the | |
1087 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
1088 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
1089 | serial ports). | |
1090 | ||
1091 | To compile this driver as a module, choose M here: the | |
1092 | module will be called sch311x_wdt. | |
1093 | ||
485ae77d SA |
1094 | config SMSC37B787_WDT |
1095 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 1096 | depends on X86 |
485ae77d SA |
1097 | ---help--- |
1098 | This is the driver for the hardware watchdog component on the | |
1099 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
1100 | from Vision Systems and maybe others. | |
1101 | ||
1102 | This watchdog simply watches your kernel to make sure it doesn't | |
1103 | freeze, and if it does, it reboots your computer after a certain | |
1104 | amount of time. | |
1105 | ||
1106 | Usually a userspace daemon will notify the kernel WDT driver that | |
1107 | userspace is still alive, at regular intervals. | |
1108 | ||
1109 | To compile this driver as a module, choose M here: the | |
1110 | module will be called smsc37b787_wdt. | |
1111 | ||
1112 | Most people will say N. | |
1113 | ||
dc3c56b7 MV |
1114 | config VIA_WDT |
1115 | tristate "VIA Watchdog Timer" | |
690e7a70 | 1116 | depends on X86 && PCI |
dc3c56b7 MV |
1117 | select WATCHDOG_CORE |
1118 | ---help--- | |
1119 | This is the driver for the hardware watchdog timer on VIA | |
1120 | southbridge chipset CX700, VX800/VX820 or VX855/VX875. | |
1121 | ||
1122 | To compile this driver as a module, choose M here; the module | |
1123 | will be called via_wdt. | |
1124 | ||
1125 | Most people will say N. | |
1126 | ||
1da177e4 | 1127 | config W83627HF_WDT |
962c04f5 | 1128 | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" |
261259b2 | 1129 | depends on X86 |
30a83695 | 1130 | select WATCHDOG_CORE |
1da177e4 | 1131 | ---help--- |
962c04f5 GR |
1132 | This is the driver for the hardware watchdog on the following |
1133 | Super I/O chips. | |
1134 | W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG | |
1135 | W83637HF | |
1136 | W83667HG/HG-B | |
1137 | W83687THF | |
7b6d0b6a GR |
1138 | W83697HF |
1139 | W83697UG | |
962c04f5 GR |
1140 | NCT6775 |
1141 | NCT6776 | |
1142 | NCT6779 | |
a77841d5 GR |
1143 | NCT6791 |
1144 | NCT6792 | |
962c04f5 | 1145 | |
9c67bea4 BLA |
1146 | This watchdog simply watches your kernel to make sure it doesn't |
1147 | freeze, and if it does, it reboots your computer after a certain | |
1148 | amount of time. | |
1da177e4 LT |
1149 | |
1150 | To compile this driver as a module, choose M here: the | |
1151 | module will be called w83627hf_wdt. | |
1152 | ||
1153 | Most people will say N. | |
1154 | ||
1155 | config W83877F_WDT | |
1156 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 1157 | depends on X86 |
1da177e4 LT |
1158 | ---help--- |
1159 | This is the driver for the hardware watchdog on the W83877F chipset | |
1160 | as used in EMACS PC-104 motherboards (and likely others). This | |
1161 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1162 | and if it does, it reboots your computer after a certain amount of | |
1163 | time. | |
1164 | ||
1165 | To compile this driver as a module, choose M here: the | |
1166 | module will be called w83877f_wdt. | |
1167 | ||
1168 | Most people will say N. | |
1169 | ||
b4cc4aa2 JMG |
1170 | config W83977F_WDT |
1171 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 1172 | depends on X86 |
b4cc4aa2 JMG |
1173 | ---help--- |
1174 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
1175 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
1176 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1177 | and if it does, it reboots your computer after a certain amount of | |
1178 | time. | |
1179 | ||
1180 | To compile this driver as a module, choose M here: the | |
1181 | module will be called w83977f_wdt. | |
1182 | ||
1da177e4 LT |
1183 | config MACHZ_WDT |
1184 | tristate "ZF MachZ Watchdog" | |
261259b2 | 1185 | depends on X86 |
1da177e4 LT |
1186 | ---help--- |
1187 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 1188 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
1189 | processor using ZF-Logic interface. This watchdog simply watches |
1190 | your kernel to make sure it doesn't freeze, and if it does, it | |
1191 | reboots your computer after a certain amount of time. | |
1192 | ||
1193 | To compile this driver as a module, choose M here: the | |
1194 | module will be called machzwd. | |
1195 | ||
eed6565f CC |
1196 | config SBC_EPX_C3_WATCHDOG |
1197 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 1198 | depends on X86 |
eed6565f CC |
1199 | ---help--- |
1200 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
1201 | Single-board computer made by Winsystems, Inc. | |
1202 | ||
1203 | *Note*: This hardware watchdog is not probeable and thus there | |
1204 | is no way to know if writing to its IO address will corrupt | |
1205 | your system or have any real effect. The only way to be sure | |
1206 | that this driver does what you want is to make sure you | |
2621e2a1 | 1207 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
1208 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
1209 | IO ports. Basically, the assumption is made that if you compile | |
1210 | this driver into your kernel and/or load it as a module, that you | |
1211 | know what you are doing and that you are in fact running on an | |
1212 | EPX-C3 board! | |
1213 | ||
1214 | To compile this driver as a module, choose M here: the | |
1215 | module will be called sbc_epx_c3. | |
1216 | ||
c0e962f9 | 1217 | # M32R Architecture |
1da177e4 | 1218 | |
c0e962f9 WVS |
1219 | # M68K Architecture |
1220 | ||
4157a04d PDM |
1221 | config M54xx_WATCHDOG |
1222 | tristate "MCF54xx watchdog support" | |
88cce427 PDM |
1223 | depends on M548x |
1224 | help | |
1225 | To compile this driver as a module, choose M here: the | |
4157a04d | 1226 | module will be called m54xx_wdt. |
c0e962f9 | 1227 | |
e9659e69 AC |
1228 | # MicroBlaze Architecture |
1229 | ||
c0e962f9 WVS |
1230 | # MIPS Architecture |
1231 | ||
f8394f61 GJ |
1232 | config ATH79_WDT |
1233 | tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" | |
1234 | depends on ATH79 | |
1235 | help | |
1236 | Hardware driver for the built-in watchdog timer on the Atheros | |
1237 | AR71XX/AR724X/AR913X SoCs. | |
1238 | ||
90074dce | 1239 | config BCM47XX_WDT |
1240 | tristate "Broadcom BCM47xx Watchdog Timer" | |
94613431 | 1241 | depends on BCM47XX || ARCH_BCM_5301X |
5434a04d | 1242 | select WATCHDOG_CORE |
90074dce | 1243 | help |
6b2aac42 | 1244 | Hardware driver for the Broadcom BCM47xx Watchdog Timer. |
90074dce | 1245 | |
03ec5856 FF |
1246 | config RC32434_WDT |
1247 | tristate "IDT RC32434 SoC Watchdog Timer" | |
1248 | depends on MIKROTIK_RB532 | |
1249 | help | |
1250 | Hardware driver for the IDT RC32434 SoC built-in | |
1251 | watchdog timer. | |
1252 | ||
1253 | To compile this driver as a module, choose M here: the | |
1254 | module will be called rc32434_wdt. | |
1255 | ||
c0e962f9 WVS |
1256 | config INDYDOG |
1257 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 1258 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
1259 | help |
1260 | Hardware driver for the Indy's/I2's watchdog. This is a | |
1261 | watchdog timer that will reboot the machine after a 60 second | |
1262 | timer expired and no process has written to /dev/watchdog during | |
1263 | that time. | |
1264 | ||
f865c352 PC |
1265 | config JZ4740_WDT |
1266 | tristate "Ingenic jz4740 SoC hardware watchdog" | |
1267 | depends on MACH_JZ4740 | |
85f6df14 | 1268 | select WATCHDOG_CORE |
f865c352 PC |
1269 | help |
1270 | Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. | |
1271 | ||
c0e962f9 WVS |
1272 | config WDT_MTX1 |
1273 | tristate "MTX-1 Hardware Watchdog" | |
1274 | depends on MIPS_MTX1 | |
1275 | help | |
1276 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
1277 | will reboot the machine after a 100 seconds timer expired. | |
1278 | ||
33c050c5 DL |
1279 | config PNX833X_WDT |
1280 | tristate "PNX833x Hardware Watchdog" | |
1281 | depends on SOC_PNX8335 | |
1282 | help | |
1283 | Hardware driver for the PNX833x's watchdog. This is a | |
25985edc | 1284 | watchdog timer that will reboot the machine after a programmable |
33c050c5 DL |
1285 | timer has expired and no process has written to /dev/watchdog during |
1286 | that time. | |
1287 | ||
75c752e6 AS |
1288 | config SIBYTE_WDOG |
1289 | tristate "Sibyte SoC hardware watchdog" | |
1290 | depends on CPU_SB1 | |
1291 | help | |
1292 | Watchdog driver for the built in watchdog hardware in Sibyte | |
1293 | SoC processors. There are apparently two watchdog timers | |
1294 | on such processors; this driver supports only the first one, | |
1295 | because currently Linux only supports exporting one watchdog | |
1296 | to userspace. | |
1297 | ||
1298 | To compile this driver as a loadable module, choose M here. | |
1299 | The module will be called sb_wdog. | |
1300 | ||
c283cf2c MC |
1301 | config AR7_WDT |
1302 | tristate "TI AR7 Watchdog Timer" | |
1303 | depends on AR7 | |
1304 | help | |
1305 | Hardware driver for the TI AR7 Watchdog Timer. | |
1306 | ||
6f702fce AN |
1307 | config TXX9_WDT |
1308 | tristate "Toshiba TXx9 Watchdog Timer" | |
1309 | depends on CPU_TX39XX || CPU_TX49XX | |
d6245842 | 1310 | select WATCHDOG_CORE |
6f702fce AN |
1311 | help |
1312 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
1313 | ||
4c076fb4 DD |
1314 | config OCTEON_WDT |
1315 | tristate "Cavium OCTEON SOC family Watchdog Timer" | |
9ddebc46 | 1316 | depends on CAVIUM_OCTEON_SOC |
4c076fb4 | 1317 | default y |
3d588c93 | 1318 | select WATCHDOG_CORE |
4c076fb4 DD |
1319 | select EXPORT_UASM if OCTEON_WDT = m |
1320 | help | |
1321 | Hardware driver for OCTEON's on chip watchdog timer. | |
1322 | Enables the watchdog for all cores running Linux. It | |
1323 | installs a NMI handler and pokes the watchdog based on an | |
1324 | interrupt. On first expiration of the watchdog, the | |
1325 | interrupt handler pokes it. The second expiration causes an | |
1326 | NMI that prints a message. The third expiration causes a | |
1327 | global soft reset. | |
1328 | ||
1329 | When userspace has /dev/watchdog open, no poking is done | |
1330 | from the first interrupt, it is then only poked when the | |
1331 | device is written. | |
1332 | ||
b63aa731 FF |
1333 | config BCM63XX_WDT |
1334 | tristate "Broadcom BCM63xx hardware watchdog" | |
1335 | depends on BCM63XX | |
1336 | help | |
1337 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1338 | BCM63xx SoC. | |
1339 | ||
1340 | To compile this driver as a loadable module, choose M here. | |
1341 | The module will be called bcm63xx_wdt. | |
1342 | ||
938d0a84 LR |
1343 | config BCM2835_WDT |
1344 | tristate "Broadcom BCM2835 hardware watchdog" | |
1345 | depends on ARCH_BCM2835 | |
1346 | select WATCHDOG_CORE | |
1347 | help | |
1348 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1349 | BCM2835 SoC. | |
1350 | ||
1351 | To compile this driver as a loadable module, choose M here. | |
1352 | The module will be called bcm2835_wdt. | |
1353 | ||
6adb730d MM |
1354 | config BCM_KONA_WDT |
1355 | tristate "BCM Kona Watchdog" | |
5e82ec94 | 1356 | depends on ARCH_BCM_MOBILE |
6adb730d MM |
1357 | select WATCHDOG_CORE |
1358 | help | |
1359 | Support for the watchdog timer on the following Broadcom BCM281xx | |
1360 | family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and | |
1361 | BCM28155 variants. | |
1362 | ||
1363 | Say 'Y' or 'M' here to enable the driver. The module will be called | |
1364 | bcm_kona_wdt. | |
1365 | ||
6e2ac20e MM |
1366 | config BCM_KONA_WDT_DEBUG |
1367 | bool "DEBUGFS support for BCM Kona Watchdog" | |
1368 | depends on BCM_KONA_WDT | |
1369 | help | |
1370 | If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides | |
1371 | access to the driver's internal data structures as well as watchdog | |
1372 | timer hardware registres. | |
1373 | ||
1374 | If in doubt, say 'N'. | |
1375 | ||
7a3629fe JC |
1376 | config BCM7038_WDT |
1377 | tristate "BCM7038 Watchdog" | |
1378 | select WATCHDOG_CORE | |
d42d6108 | 1379 | depends on HAS_IOMEM |
7a3629fe JC |
1380 | help |
1381 | Watchdog driver for the built-in hardware in Broadcom 7038 SoCs. | |
1382 | ||
1383 | Say 'Y or 'M' here to enable the driver. | |
1384 | ||
93937669 NT |
1385 | config IMGPDC_WDT |
1386 | tristate "Imagination Technologies PDC Watchdog Timer" | |
1387 | depends on HAS_IOMEM | |
1388 | depends on METAG || MIPS || COMPILE_TEST | |
df1a3e64 | 1389 | select WATCHDOG_CORE |
93937669 NT |
1390 | help |
1391 | Driver for Imagination Technologies PowerDown Controller | |
1392 | Watchdog Timer. | |
1393 | ||
1394 | To compile this driver as a loadable module, choose M here. | |
1395 | The module will be called imgpdc_wdt. | |
1396 | ||
2f58b8d0 JC |
1397 | config LANTIQ_WDT |
1398 | tristate "Lantiq SoC watchdog" | |
1399 | depends on LANTIQ | |
1400 | help | |
1401 | Hardware driver for the Lantiq SoC Watchdog Timer. | |
1402 | ||
473cf939 JC |
1403 | config RALINK_WDT |
1404 | tristate "Ralink SoC watchdog" | |
1405 | select WATCHDOG_CORE | |
1406 | depends on RALINK | |
1407 | help | |
1408 | Hardware driver for the Ralink SoC Watchdog Timer. | |
1409 | ||
ab3f09fe JC |
1410 | config MT7621_WDT |
1411 | tristate "Mediatek SoC watchdog" | |
1412 | select WATCHDOG_CORE | |
1413 | depends on SOC_MT7620 || SOC_MT7621 | |
1414 | help | |
1415 | Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer. | |
1416 | ||
c0e962f9 WVS |
1417 | # PARISC Architecture |
1418 | ||
1419 | # POWERPC Architecture | |
1da177e4 | 1420 | |
3268b561 | 1421 | config GEF_WDT |
cda61c94 | 1422 | tristate "GE Watchdog Timer" |
330bbf48 | 1423 | depends on GE_FPGA |
3268b561 | 1424 | ---help--- |
cda61c94 | 1425 | Watchdog timer found in a number of GE single board computers. |
3268b561 | 1426 | |
8cf18971 | 1427 | config MPC5200_WDT |
6d535599 | 1428 | bool "MPC52xx Watchdog Timer" |
8cf18971 | 1429 | depends on PPC_MPC52xx |
6d535599 AD |
1430 | help |
1431 | Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. | |
8cf18971 | 1432 | |
28acd02f AV |
1433 | config 8xxx_WDT |
1434 | tristate "MPC8xxx Platform Watchdog Timer" | |
f8c33e97 | 1435 | depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x |
d5cfaf0a | 1436 | select WATCHDOG_CORE |
28acd02f AV |
1437 | help |
1438 | This driver is for a SoC level watchdog that exists on some | |
1439 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 1440 | - MPC8xx watchdogs |
28acd02f AV |
1441 | - MPC83xx watchdogs |
1442 | - MPC86xx watchdogs | |
1443 | ||
1444 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 1445 | |
3be10211 JC |
1446 | config MV64X60_WDT |
1447 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 1448 | depends on MV64X60 |
3be10211 | 1449 | |
618efba9 SM |
1450 | config PIKA_WDT |
1451 | tristate "PIKA FPGA Watchdog" | |
1452 | depends on WARP | |
1453 | default y | |
1454 | help | |
1455 | This enables the watchdog in the PIKA FPGA. Currently used on | |
1456 | the Warp platform. | |
1457 | ||
a2f40ccd | 1458 | config BOOKE_WDT |
fbdd7144 | 1459 | tristate "PowerPC Book-E Watchdog Timer" |
261259b2 | 1460 | depends on BOOKE || 4xx |
52e5cc4e | 1461 | select WATCHDOG_CORE |
39cdc4bf | 1462 | ---help--- |
fbdd7144 TT |
1463 | Watchdog driver for PowerPC Book-E chips, such as the Freescale |
1464 | MPC85xx SOCs and the IBM PowerPC 440. | |
1465 | ||
39cdc4bf KG |
1466 | Please see Documentation/watchdog/watchdog-api.txt for |
1467 | more information. | |
a2f40ccd | 1468 | |
e0dc09ff TT |
1469 | config BOOKE_WDT_DEFAULT_TIMEOUT |
1470 | int "PowerPC Book-E Watchdog Timer Default Timeout" | |
1471 | depends on BOOKE_WDT | |
be0884ce SX |
1472 | default 38 if PPC_FSL_BOOK3E |
1473 | range 0 63 if PPC_FSL_BOOK3E | |
1474 | default 3 if !PPC_FSL_BOOK3E | |
1475 | range 0 3 if !PPC_FSL_BOOK3E | |
e0dc09ff TT |
1476 | help |
1477 | Select the default watchdog timer period to be used by the PowerPC | |
1478 | Book-E watchdog driver. A watchdog "event" occurs when the bit | |
1479 | position represented by this number transitions from zero to one. | |
1480 | ||
1481 | For Freescale Book-E processors, this is a number between 0 and 63. | |
1482 | For other Book-E processors, this is a number between 0 and 3. | |
1483 | ||
e1d1d68a | 1484 | The value can be overridden by the wdt_period command-line parameter. |
e0dc09ff | 1485 | |
26c57ef1 JT |
1486 | config MEN_A21_WDT |
1487 | tristate "MEN A21 VME CPU Carrier Board Watchdog Timer" | |
1488 | select WATCHDOG_CORE | |
21a926a3 | 1489 | depends on GPIOLIB || COMPILE_TEST |
26c57ef1 JT |
1490 | help |
1491 | Watchdog driver for MEN A21 VMEbus CPU Carrier Boards. | |
1492 | ||
1493 | The driver can also be built as a module. If so, the module will be | |
1494 | called mena21_wdt. | |
1495 | ||
1496 | If unsure select N here. | |
1497 | ||
180536f8 WVS |
1498 | # PPC64 Architecture |
1499 | ||
1500 | config WATCHDOG_RTAS | |
1501 | tristate "RTAS watchdog" | |
261259b2 | 1502 | depends on PPC_RTAS |
180536f8 WVS |
1503 | help |
1504 | This driver adds watchdog support for the RTAS watchdog. | |
1505 | ||
c310e2b9 | 1506 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
1507 | will be called wdrtas. |
1508 | ||
1da177e4 LT |
1509 | # S390 Architecture |
1510 | ||
f7a94db4 PH |
1511 | config DIAG288_WATCHDOG |
1512 | tristate "System z diag288 Watchdog" | |
261259b2 | 1513 | depends on S390 |
f7a94db4 | 1514 | select WATCHDOG_CORE |
1da177e4 LT |
1515 | help |
1516 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
1517 | provide a virtual watchdog timer to their guest that cause a | |
1518 | user define Control Program command to be executed after a | |
1519 | timeout. | |
646f919e PH |
1520 | LPAR provides a very similar interface. This driver handles |
1521 | both. | |
1da177e4 LT |
1522 | |
1523 | To compile this driver as a module, choose M here. The module | |
a8fa3943 | 1524 | will be called diag288_wdt. |
1da177e4 | 1525 | |
c0e962f9 | 1526 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
1527 | |
1528 | config SH_WDT | |
1529 | tristate "SuperH Watchdog" | |
d0afa579 | 1530 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1950f499 | 1531 | select WATCHDOG_CORE |
1da177e4 LT |
1532 | help |
1533 | This driver adds watchdog support for the integrated watchdog in the | |
1534 | SuperH processors. If you have one of these processors and wish | |
1535 | to have watchdog support enabled, say Y, otherwise say N. | |
1536 | ||
1537 | As a side note, saying Y here will automatically boost HZ to 1000 | |
1538 | so that the timer has a chance to clear the overflow counter. On | |
1539 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
1540 | some performance issues. As such, the WDT should be avoided here | |
1541 | unless it is absolutely necessary. | |
1542 | ||
1543 | To compile this driver as a module, choose M here: the | |
1544 | module will be called shwdt. | |
1545 | ||
c0e962f9 WVS |
1546 | # SPARC Architecture |
1547 | ||
1da177e4 LT |
1548 | # SPARC64 Architecture |
1549 | ||
1550 | config WATCHDOG_CP1XXX | |
1551 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 1552 | depends on SPARC64 && PCI |
1da177e4 LT |
1553 | ---help--- |
1554 | This is the driver for the hardware watchdog timers present on | |
1555 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
1556 | ||
1557 | To compile this driver as a module, choose M here: the | |
1558 | module will be called cpwatchdog. | |
1559 | ||
1560 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
1561 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
1562 | you should say N to this option. | |
1563 | ||
1564 | config WATCHDOG_RIO | |
1565 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 1566 | depends on SPARC64 && PCI |
1da177e4 LT |
1567 | help |
1568 | Say Y here to support the hardware watchdog capability on Sun RIO | |
1569 | machines. The watchdog timeout period is normally one minute but | |
1570 | can be changed with a boot-time parameter. | |
1571 | ||
c0e962f9 WVS |
1572 | # XTENSA Architecture |
1573 | ||
066d6c7f JB |
1574 | # Xen Architecture |
1575 | ||
1576 | config XEN_WDT | |
1577 | tristate "Xen Watchdog support" | |
1578 | depends on XEN | |
1579 | help | |
1580 | Say Y here to support the hypervisor watchdog capability provided | |
1581 | by Xen 4.0 and newer. The watchdog timeout period is normally one | |
1582 | minute but can be changed with a boot-time parameter. | |
1583 | ||
d805a786 AV |
1584 | config UML_WATCHDOG |
1585 | tristate "UML watchdog" | |
1586 | depends on UML | |
1587 | ||
1da177e4 LT |
1588 | # |
1589 | # ISA-based Watchdog Cards | |
1590 | # | |
1591 | ||
1592 | comment "ISA-based Watchdog Cards" | |
261259b2 | 1593 | depends on ISA |
1da177e4 LT |
1594 | |
1595 | config PCWATCHDOG | |
1596 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 1597 | depends on ISA |
1da177e4 LT |
1598 | ---help--- |
1599 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
1600 | This card simply watches your kernel to make sure it doesn't freeze, | |
1601 | and if it does, it reboots your computer after a certain amount of | |
1602 | time. This driver is like the WDT501 driver but for different | |
1603 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
1604 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
1605 | ||
1606 | To compile this driver as a module, choose M here: the | |
1607 | module will be called pcwd. | |
1608 | ||
1609 | Most people will say N. | |
1610 | ||
1611 | config MIXCOMWD | |
1612 | tristate "Mixcom Watchdog" | |
261259b2 | 1613 | depends on ISA |
1da177e4 LT |
1614 | ---help--- |
1615 | This is a driver for the Mixcom hardware watchdog cards. This | |
1616 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1617 | and if it does, it reboots your computer after a certain amount of | |
1618 | time. | |
1619 | ||
1620 | To compile this driver as a module, choose M here: the | |
1621 | module will be called mixcomwd. | |
1622 | ||
1623 | Most people will say N. | |
1624 | ||
1625 | config WDT | |
1626 | tristate "WDT Watchdog timer" | |
261259b2 | 1627 | depends on ISA |
1da177e4 LT |
1628 | ---help--- |
1629 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
1630 | otherwise N. It is not possible to probe for this board, which means | |
1631 | that you have to inform the kernel about the IO port and IRQ that | |
1632 | is needed (you can do this via the io and irq parameters) | |
1633 | ||
1634 | To compile this driver as a module, choose M here: the | |
1635 | module will be called wdt. | |
1636 | ||
1da177e4 LT |
1637 | # |
1638 | # PCI-based Watchdog Cards | |
1639 | # | |
1640 | ||
1641 | comment "PCI-based Watchdog Cards" | |
261259b2 | 1642 | depends on PCI |
1da177e4 LT |
1643 | |
1644 | config PCIPCWATCHDOG | |
1645 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 1646 | depends on PCI |
1da177e4 LT |
1647 | ---help--- |
1648 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
1649 | This card simply watches your kernel to make sure it doesn't freeze, | |
1650 | and if it does, it reboots your computer after a certain amount of | |
1651 | time. The card can also monitor the internal temperature of the PC. | |
1652 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
1653 | ||
1654 | To compile this driver as a module, choose M here: the | |
1655 | module will be called pcwd_pci. | |
1656 | ||
1657 | Most people will say N. | |
1658 | ||
1659 | config WDTPCI | |
1660 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 1661 | depends on PCI |
1da177e4 LT |
1662 | ---help--- |
1663 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
1664 | ||
9b901ee0 WVS |
1665 | If you have a PCI-WDT501 watchdog board then you can enable the |
1666 | temperature sensor by setting the type parameter to 501. | |
1da177e4 LT |
1667 | |
1668 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1669 | can do this via the tachometer parameter. Only do this if you have a | |
1670 | fan tachometer actually set up. | |
1671 | ||
9b901ee0 WVS |
1672 | To compile this driver as a module, choose M here: the |
1673 | module will be called wdt_pci. | |
1674 | ||
1da177e4 LT |
1675 | # |
1676 | # USB-based Watchdog Cards | |
1677 | # | |
1678 | ||
1679 | comment "USB-based Watchdog Cards" | |
261259b2 | 1680 | depends on USB |
1da177e4 LT |
1681 | |
1682 | config USBPCWATCHDOG | |
1683 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1684 | depends on USB |
1da177e4 LT |
1685 | ---help--- |
1686 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1687 | This card simply watches your kernel to make sure it doesn't freeze, | |
1688 | and if it does, it reboots your computer after a certain amount of | |
1689 | time. The card can also monitor the internal temperature of the PC. | |
1690 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1691 | ||
1692 | To compile this driver as a module, choose M here: the | |
1693 | module will be called pcwd_usb. | |
1694 | ||
1695 | Most people will say N. | |
1696 | ||
261259b2 | 1697 | endif # WATCHDOG |