[deliverable/titan.core.git] / etc / howto / titan_release_howto.txt

###############################################################################
# Copyright (c) 2000-2015 Ericsson Telecom AB
# All rights reserved. This program and the accompanying materials
# are made available under the terms of the Eclipse Public License v1.0
# which accompanies this distribution, and is available at
# http://www.eclipse.org/legal/epl-v10.html
###############################################################################
Preparing for the release\r
=========================\r
\r
Assume that the release date and version (e.g. /2 R1A) are fixed and\r
clear. The nightly tests were successful for at least three days before\r
the release date. It was one of our release criterias which not\r
necessarily valid today. Juli is notified.\r
\r
Finishing documents\r
===================\r
\r
A few days before the release Juli sends a list of documents, which need\r
to be updated. The version numbers need to be set. If a document is no\r
longer needed use a '/' character instead of a version number. Otherwise,\r
increase the version number appropriately when a given document is changed,\r
if not the version number will remain the same. The letter with the proper\r
version numbers should be sent back to Juli.\r
\r
For version CRL 113 200/2 R2A:\r
\r
Doc no.... 1095-CRL 113 200/2               Rev. B 120717    *Hist.rev.\r
Doc resp.. ETH/XZX          Des resp.. ETH/XZX       Text. N Ready to. R1A\r
Func des.. TTCN-3 Executor                  PREL             Show prel.(Y/\r
                                           PRA,DS4,          PR-,DS-,\r
   A-cd  Document number/ +  R1A                        R2A\r
-- ----- ------------------------------ -  FREE---- PREL---- FREE---- PREL\r
   0     109 21-                           -1,A                       -2,A\r
   1     109 47-                           A                          \r
   1     1/1531-                           A                          Installation Guide\r
   1     3/1531-                           A                          Eclipse install.guide\r
   1     1/198 17-                         A                          user guide\r
   1     2/198 17-                         A                          Reference guide\r
   1     4/198 17-                         A                          Eclipse_Designer_userguide\r
   1     5/198 17-                         A                          Eclipse_Executor_userguide\r
   1     6/198 17-                         A                          Apiguide\r
   1     7/198 17-                         A                          UG for TITAN MCTR GUI\r
\r
Test doksik:\r
\r
A   A-cd  Document number/+  R1A                        R2A\r
--- ----- ------------------------------ -  FREE---- PREL---- FREE---- PRE\r
    3     152 83-                           A                         TTCN-3 Executor Test Report\r
    3     3/152 83-                         A                         Test Report for TITAN Designer and TITAN Executor for the Eclipse IDE, TITAN R7.1 project\r
    3     7/152 91-                         A                         Test description - RAW coder \r
    3     8/152 91-                         A                         Test description - BER coder \r
    3     12/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer: Unknown Object \r
    3     14/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer: Scope Rules\r
    3     15/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer: Parameters\r
    3     16/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer:Type compatibility \r
    3     17/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer:Values, Value Lists, Ranges, Length, Dimensions, \r
    3     18/152 91-                        A                         Test description of the TTCN-3 Test description of the TTCN-3 Semantic Analyzer: Location of Languag    \r
    3     20/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer: Adhoc tests \r
    3     21/152 91-                        A                         Test Description - Text based coding for TTCN-3 Test Executor \r
    3     22/152 91-                        A                         Test description of the TTCN-3 Semantic Analyzer:Implicit message encoding \r
    3     23/152 91-                        A                         Test Description for TITAN Designer and TITAN Executor for the Eclipse IDE \r
\r
The name of the document is additional information in the last column, they look\r
a bit strange sometimes...\r
\r
The PRI contains the list of:\r
- Solved CRs for the release (using to the Titan worklist)\r
- Solved TRs for the release (using an MHWeb filter based on the release version)\r
- Open TRs (using an MHWeb filter)\r
\r
The "TTCN-3 Executor Test Report" needs to be updated when the Titan test suite\r
was modified between releases. It can be found in /function_test/doc.\r
\r
All the documents are sent to Juli in .doc format except the test documents, they\r
need to be converted to .pdf using http://edfs.ericsson.se:8080/edfsweb.\r
\r
Releasing and Building Titan\r
============================\r
\r
- Update version numbers in the code and documentation both in Eclipse and the\r
  compiler. This affects the following files:\r
  - /Makefile.cfg\r
  - /common/version.h\r
  - /eclipse/com.ericsson.titan.executor/src/com/ericsson/titan/executor/executors/jni/LaunchConfigurationDelegate.java\r
  - /eclipse/com.ericsson.titan.designer/src/com/ericsson/titan/designer/GeneralConstants.java\r
\r
- Tag all the source files in the TTCNv3 module:\r
  cvs tag v2-1-pl0 Makefile* .cvsignore common compiler2 core core2 ctags eclipse\r
  etc hello help license logbrowser mctr2 repgen usrguide xsdconvert loggerplugins\r
  (If something goes wrong later the tag can be removed and replaced.)\r
\r
- The official Titan package needs to be built on korsch Solaris SPARC 2.6 with gcc\r
  3.4.6. Be aware that this is a very slow machine without HP support. AFAIK, we don't\r
  even know the root password of it. If something happens with it... It would be better\r
  to use one of our Linux platforms as official platform. Solaris going out of fashion.\r
  The current Makefile.cfg is ready for this Solaris build, everything is in place.\r
\r
- Building packages on VMware images can be simplified using Gabor Szalai's scripts\r
  like build_titan.sh in /mnt/TTCN/Tools/bin. It requires two parameters, one for the\r
  source directory and one for the target directory. It sets everything in Makefile.cfg.\r
\r
Releasing and Building the Eclipse Plugins\r
==========================================\r
\r
An Eclipse installation is necessary, its version is not important, but all\r
the plugins should run on this version without problem. Check the\r
documentation for any restriction. The following things make an Eclipse release:\r
\r
- Check out the CVS and import all the Titan Eclipse plugins to your workspace\r
  using "Import" -> "General" -> "Existing Projects into Workspace" and select\r
  the root directory checked out. Eclipse will automatically create the projects\r
  for all the plugins (common, designer, executor, help, regressiontests) and\r
  features (designer, executor, logviewer).\r
\r
- Build the plugins using "Build Project", but previously compile all the ANTLR\r
  grammar files by hand taking care of their dependencies. The ANTLR plugin will\r
  not handle these dependencies and there will be errors otherwise.\r
\r
- Try out the plugins.\r
\r
- Update the version number in all of the feature.xml files of the three features,\r
  then push this new version to the plugins using the "Plug-ins" tab -> "Versions..."\r
  -> "Force feature version into plug-in and fragment manifests". This needs to be\r
  done for all of the features. Save all the files and commit the changes to CVS,\r
  do this before tagging the code base.\r
\r
- Copy the documentation (all the PDFs from /usrguide) to the doc directory of\r
  the help plugin.\r
\r
- Upload the plugins to the official update site page:\r
  http://ttcn.ericsson.se/download/update_site. All the older plugins need\r
  to remain accessible there as well. The index.html needs to be updated by hand.\r
  The best way to do this is to copy the whole update site to your local workspace\r
  and add the three new features (designer, executor, logviewer) to the update\r
  site project, then rebuild the update site with "Build All". The artifacts.jar,\r
  content.jar, site.xml will be updated automatically. The three new features\r
  and five new plugins (common, designer, executor, help, logviewer) will be\r
  written into them.\r
\r
- Three static packages needed for: http://ttcn.ericsson.se/download:\r
  - TITAN Designer for Eclipse IDE (only the designer)\r
  - TITAN Executor for Eclipse IDE (only the executor)\r
  - TITAN Designer and Executor for Eclipse IDE (Designer and Executor merged)\r
  These are simple archives (.zip) and users with no access to the main update\r
  site can use these to update their plugins from disk. A separate update site\r
  project is necessary for each of these packages. The "TITAN Designer for\r
  Eclipse IDE" contains the logviewer as well... These packages are stored by\r
  Juli in PRIM together with the official Titan build.\r
\r
Final steps\r
===========\r
\r
Juli will release a Titan binary package compiled on Korsch using gcc 3.4.6\r
and the archived Eclipse plugins and tag them in CC. The tag name for Eclipse\r
plugins is TITAN_2_R1A and TITAN_2_R1A_GCC3.4.6 for the binary package. When\r
Juli is ready with this and all the documents are accepted, the release is\r
officially done. The korsch is used for historical reasons, it would be better to\r
use a HUB machine for this purpose. The HP has no information about this SPARC\r
Solaris 2.6 machine, it's very slow and we don't have the root password for it...\r
\r
The Eclipse plugins and the binary package should be made available for Juli,\r
e.g. on HUB:\r
- From /proj/TTCN/www/ttcn/root/download/docs_for_juli_titan_r10a/Eclipse to /vobs/ttcn/TCC_Releases/Titan/TitanPlugins4Eclipse\r
- From /proj/TTCN/www/ttcn/root/download/docs_for_juli_titan_r10a/TTCNv3-1.10.pl0-gcc3.4.6 to /vobs/ttcn/TCC_Releases/Titan/Titan_Sol\r
\r
TTCNv3-1.10.pl0-gcc3.4.6 is an unzipped Titan installation directory. The\r
contents of Eclipse:\r
\r
Designer/\r
Designer_and_Executor/\r
Executor/\r
\r
These are the unzipped update site projects.\r
\r
Update index.htmls both in /proj/TTCN/www/ttcn/root/download and\r
/proj/TTCN/www/ttcn/root/download/update_site on HUB and upload PDF documentation,\r
namely:\r
- Eclipse_Designer_userguide.pdf\r
- Eclipse_Executor_userguide.pdf\r
- Eclipse_installationguide.pdf\r
- PRI_2_2_A.pdf (Version!)\r
- apiguide.pdf\r
- installationguide.pdf\r
- referenceguide.pdf\r
- releasenotes.pdf\r
- userguide.pdf\r
- userguide_mctr_gui.pdf\r
\r
Notifying the users\r
===================\r
\r
Conventionally a release letter is sent for each of our active users found\r
in our license database. Additionally the release letter is uploaded to the\r
Titan project page as well: https://ericoll.internal.ericsson.com/sites/\r
Titan/Lists/Titan%20Announcements/AllItems.aspx.\r
\r
A sample release letter can be sent using the system's default mailer for all\r
the users with active Titan license. The list of these users can be obtained\r
by an SQL query on any HUB machine:\r
\r
mysql -u etccadmi1 -D ttcn3 --host=esekilx0007-sql5.rnd.ki.sw.ericsson.se\r
--port=3314 -pAsQw1123 -e"SELECT DISTINCT licensee_email FROM licenses\r
WHERE email_announce = 'Yes' AND valid_until >= CURDATE()"\r
\r
The list should be saved into a file and with a simple script the release\r
letter can be delivered to all of the users one by one. Some years ago it\r
was sent to a mailing list, but now it's different... You can run this script\r
on HUB or somwhere else where the mailer is configured correctly:\r
\r
for u in `cat 2r2a_users.txt`; do\r
mail -r ferenc.kovacs@ericsson.com\r
  -s "Titan CRL 113 200/2 R2A release notification" $u <2r2a_notification.txt;\r
done\r
\r
2r2a_users.txt is coming from the SQL query with a simple stdout redirection,\r
it's a newline separated list (NOTE! the line endings must be Unix line endings)
of email addresses iterable with this simple\r
script. 2r2a_notification.txt can contain the following, ignore version\r
numbers and features now:\r
\r
Titan CRL 113 200/2 R1A release notification\r
\r
Dear TTCN-3 User,\r
\r
We would like to announce that version CRL 113 200/2 R1A (2.1.pl0) of Titan\r
TTCN-3 Test Executor was released.\r
\r
The new features besides the bugfixes are:\r
Commit	Line	Data
970ed795	1	###############################################################################
3abe9331	2	# Copyright (c) 2000-2015 Ericsson Telecom AB
970ed795 EL	3	# All rights reserved. This program and the accompanying materials
	4	# are made available under the terms of the Eclipse Public License v1.0
	5	# which accompanies this distribution, and is available at
	6	# http://www.eclipse.org/legal/epl-v10.html
	7	###############################################################################
	8	Preparing for the release\r
	9	=========================\r
	10	\r
	11	Assume that the release date and version (e.g. /2 R1A) are fixed and\r
	12	clear. The nightly tests were successful for at least three days before\r
	13	the release date. It was one of our release criterias which not\r
	14	necessarily valid today. Juli is notified.\r
	15	\r
	16	Finishing documents\r
	17	===================\r
	18	\r
	19	A few days before the release Juli sends a list of documents, which need\r
	20	to be updated. The version numbers need to be set. If a document is no\r
	21	longer needed use a '/' character instead of a version number. Otherwise,\r
	22	increase the version number appropriately when a given document is changed,\r
	23	if not the version number will remain the same. The letter with the proper\r
	24	version numbers should be sent back to Juli.\r
	25	\r
	26	For version CRL 113 200/2 R2A:\r
	27	\r
	28	Doc no.... 1095-CRL 113 200/2 Rev. B 120717 *Hist.rev.\r
	29	Doc resp.. ETH/XZX Des resp.. ETH/XZX Text. N Ready to. R1A\r
	30	Func des.. TTCN-3 Executor PREL Show prel.(Y/\r
	31	PRA,DS4, PR-,DS-,\r
	32	A-cd Document number/ + R1A R2A\r
	33	-- ----- ------------------------------ - FREE---- PREL---- FREE---- PREL\r
	34	0 109 21- -1,A -2,A\r
	35	1 109 47- A \r
	36	1 1/1531- A Installation Guide\r
	37	1 3/1531- A Eclipse install.guide\r
	38	1 1/198 17- A user guide\r
	39	1 2/198 17- A Reference guide\r
	40	1 4/198 17- A Eclipse_Designer_userguide\r
	41	1 5/198 17- A Eclipse_Executor_userguide\r
	42	1 6/198 17- A Apiguide\r
	43	1 7/198 17- A UG for TITAN MCTR GUI\r
	44	\r
	45	Test doksik:\r
	46	\r
	47	A A-cd Document number/+ R1A R2A\r
	48	--- ----- ------------------------------ - FREE---- PREL---- FREE---- PRE\r
	49	3 152 83- A TTCN-3 Executor Test Report\r
	50	3 3/152 83- A Test Report for TITAN Designer and TITAN Executor for the Eclipse IDE, TITAN R7.1 project\r
	51	3 7/152 91- A Test description - RAW coder \r
	52	3 8/152 91- A Test description - BER coder \r
	53	3 12/152 91- A Test description of the TTCN-3 Semantic Analyzer: Unknown Object \r
	54	3 14/152 91- A Test description of the TTCN-3 Semantic Analyzer: Scope Rules\r
	55	3 15/152 91- A Test description of the TTCN-3 Semantic Analyzer: Parameters\r
	56	3 16/152 91- A Test description of the TTCN-3 Semantic Analyzer:Type compatibility \r
	57	3 17/152 91- A Test description of the TTCN-3 Semantic Analyzer:Values, Value Lists, Ranges, Length, Dimensions, \r
	58	3 18/152 91- A Test description of the TTCN-3 Test description of the TTCN-3 Semantic Analyzer: Location of Languag \r
	59	3 20/152 91- A Test description of the TTCN-3 Semantic Analyzer: Adhoc tests \r
	60	3 21/152 91- A Test Description - Text based coding for TTCN-3 Test Executor \r
	61	3 22/152 91- A Test description of the TTCN-3 Semantic Analyzer:Implicit message encoding \r
	62	3 23/152 91- A Test Description for TITAN Designer and TITAN Executor for the Eclipse IDE \r
	63	\r
	64	The name of the document is additional information in the last column, they look\r
	65	a bit strange sometimes...\r
	66	\r
67	The PRI contains the list of:\r
68	- Solved CRs for the release (using to the Titan worklist)\r
69	- Solved TRs for the release (using an MHWeb filter based on the release version)\r
70	- Open TRs (using an MHWeb filter)\r
71	\r
72	The "TTCN-3 Executor Test Report" needs to be updated when the Titan test suite\r
73	was modified between releases. It can be found in /function_test/doc.\r
74	\r
75	All the documents are sent to Juli in .doc format except the test documents, they\r
76	need to be converted to .pdf using http://edfs.ericsson.se:8080/edfsweb.\r
77	\r
78	Releasing and Building Titan\r
79	============================\r
80	\r
81	- Update version numbers in the code and documentation both in Eclipse and the\r
82	compiler. This affects the following files:\r
83	- /Makefile.cfg\r
84	- /common/version.h\r
85	- /eclipse/com.ericsson.titan.executor/src/com/ericsson/titan/executor/executors/jni/LaunchConfigurationDelegate.java\r
86	- /eclipse/com.ericsson.titan.designer/src/com/ericsson/titan/designer/GeneralConstants.java\r
87	\r
88	- Tag all the source files in the TTCNv3 module:\r
89	cvs tag v2-1-pl0 Makefile* .cvsignore common compiler2 core core2 ctags eclipse\r
90	etc hello help license logbrowser mctr2 repgen usrguide xsdconvert loggerplugins\r
91	(If something goes wrong later the tag can be removed and replaced.)\r
92	\r
93	- The official Titan package needs to be built on korsch Solaris SPARC 2.6 with gcc\r
94	3.4.6. Be aware that this is a very slow machine without HP support. AFAIK, we don't\r
95	even know the root password of it. If something happens with it... It would be better\r
96	to use one of our Linux platforms as official platform. Solaris going out of fashion.\r
97	The current Makefile.cfg is ready for this Solaris build, everything is in place.\r
98	\r
99	- Building packages on VMware images can be simplified using Gabor Szalai's scripts\r
100	like build_titan.sh in /mnt/TTCN/Tools/bin. It requires two parameters, one for the\r
101	source directory and one for the target directory. It sets everything in Makefile.cfg.\r
102	\r
103	Releasing and Building the Eclipse Plugins\r
104	==========================================\r
105	\r
106	An Eclipse installation is necessary, its version is not important, but all\r
107	the plugins should run on this version without problem. Check the\r
108	documentation for any restriction. The following things make an Eclipse release:\r
109	\r
110	- Check out the CVS and import all the Titan Eclipse plugins to your workspace\r
111	using "Import" -> "General" -> "Existing Projects into Workspace" and select\r
112	the root directory checked out. Eclipse will automatically create the projects\r
113	for all the plugins (common, designer, executor, help, regressiontests) and\r
114	features (designer, executor, logviewer).\r
115	\r
116	- Build the plugins using "Build Project", but previously compile all the ANTLR\r
117	grammar files by hand taking care of their dependencies. The ANTLR plugin will\r
118	not handle these dependencies and there will be errors otherwise.\r
119	\r
120	- Try out the plugins.\r
121	\r
122	- Update the version number in all of the feature.xml files of the three features,\r
123	then push this new version to the plugins using the "Plug-ins" tab -> "Versions..."\r
124	-> "Force feature version into plug-in and fragment manifests". This needs to be\r
125	done for all of the features. Save all the files and commit the changes to CVS,\r
126	do this before tagging the code base.\r
127	\r
128	- Copy the documentation (all the PDFs from /usrguide) to the doc directory of\r
129	the help plugin.\r
130	\r
131	- Upload the plugins to the official update site page:\r
132	http://ttcn.ericsson.se/download/update_site. All the older plugins need\r
133	to remain accessible there as well. The index.html needs to be updated by hand.\r
134	The best way to do this is to copy the whole update site to your local workspace\r
135	and add the three new features (designer, executor, logviewer) to the update\r
136	site project, then rebuild the update site with "Build All". The artifacts.jar,\r
137	content.jar, site.xml will be updated automatically. The three new features\r
138	and five new plugins (common, designer, executor, help, logviewer) will be\r
139	written into them.\r
140	\r
141	- Three static packages needed for: http://ttcn.ericsson.se/download:\r
142	- TITAN Designer for Eclipse IDE (only the designer)\r
143	- TITAN Executor for Eclipse IDE (only the executor)\r
144	- TITAN Designer and Executor for Eclipse IDE (Designer and Executor merged)\r
145	These are simple archives (.zip) and users with no access to the main update\r
146	site can use these to update their plugins from disk. A separate update site\r
147	project is necessary for each of these packages. The "TITAN Designer for\r
148	Eclipse IDE" contains the logviewer as well... These packages are stored by\r
149	Juli in PRIM together with the official Titan build.\r
150	\r
151	Final steps\r
152	===========\r
153	\r
154	Juli will release a Titan binary package compiled on Korsch using gcc 3.4.6\r
155	and the archived Eclipse plugins and tag them in CC. The tag name for Eclipse\r
156	plugins is TITAN_2_R1A and TITAN_2_R1A_GCC3.4.6 for the binary package. When\r
157	Juli is ready with this and all the documents are accepted, the release is\r
158	officially done. The korsch is used for historical reasons, it would be better to\r
159	use a HUB machine for this purpose. The HP has no information about this SPARC\r
160	Solaris 2.6 machine, it's very slow and we don't have the root password for it...\r
161	\r
162	The Eclipse plugins and the binary package should be made available for Juli,\r
163	e.g. on HUB:\r
164	- From /proj/TTCN/www/ttcn/root/download/docs_for_juli_titan_r10a/Eclipse to /vobs/ttcn/TCC_Releases/Titan/TitanPlugins4Eclipse\r
165	- From /proj/TTCN/www/ttcn/root/download/docs_for_juli_titan_r10a/TTCNv3-1.10.pl0-gcc3.4.6 to /vobs/ttcn/TCC_Releases/Titan/Titan_Sol\r
166	\r
167	TTCNv3-1.10.pl0-gcc3.4.6 is an unzipped Titan installation directory. The\r
168	contents of Eclipse:\r
169	\r
170	Designer/\r
171	Designer_and_Executor/\r
172	Executor/\r
173	\r
174	These are the unzipped update site projects.\r
175	\r
176	Update index.htmls both in /proj/TTCN/www/ttcn/root/download and\r
177	/proj/TTCN/www/ttcn/root/download/update_site on HUB and upload PDF documentation,\r
178	namely:\r
179	- Eclipse_Designer_userguide.pdf\r
180	- Eclipse_Executor_userguide.pdf\r
181	- Eclipse_installationguide.pdf\r
182	- PRI_2_2_A.pdf (Version!)\r
183	- apiguide.pdf\r
184	- installationguide.pdf\r
185	- referenceguide.pdf\r
186	- releasenotes.pdf\r
187	- userguide.pdf\r
188	- userguide_mctr_gui.pdf\r
189	\r
190	Notifying the users\r
191	===================\r
192	\r
193	Conventionally a release letter is sent for each of our active users found\r
194	in our license database. Additionally the release letter is uploaded to the\r
195	Titan project page as well: https://ericoll.internal.ericsson.com/sites/\r
196	Titan/Lists/Titan%20Announcements/AllItems.aspx.\r
197	\r
198	A sample release letter can be sent using the system's default mailer for all\r
199	the users with active Titan license. The list of these users can be obtained\r
200	by an SQL query on any HUB machine:\r
201	\r
202	mysql -u etccadmi1 -D ttcn3 --host=esekilx0007-sql5.rnd.ki.sw.ericsson.se\r
203	--port=3314 -pAsQw1123 -e"SELECT DISTINCT licensee_email FROM licenses\r
204	WHERE email_announce = 'Yes' AND valid_until >= CURDATE()"\r
205	\r
206	The list should be saved into a file and with a simple script the release\r
207	letter can be delivered to all of the users one by one. Some years ago it\r
208	was sent to a mailing list, but now it's different... You can run this script\r
209	on HUB or somwhere else where the mailer is configured correctly:\r
210	\r
211	for u in `cat 2r2a_users.txt`; do\r
212	mail -r ferenc.kovacs@ericsson.com\r
213	-s "Titan CRL 113 200/2 R2A release notification" $u <2r2a_notification.txt;\r
214	done\r
215	\r
216	2r2a_users.txt is coming from the SQL query with a simple stdout redirection,\r
217	it's a newline separated list (NOTE! the line endings must be Unix line endings)
218	of email addresses iterable with this simple\r
219	script. 2r2a_notification.txt can contain the following, ignore version\r
220	numbers and features now:\r
221	\r
222	Titan CRL 113 200/2 R1A release notification\r
223	\r
224	Dear TTCN-3 User,\r
225	\r
226	We would like to announce that version CRL 113 200/2 R1A (2.1.pl0) of Titan\r
227	TTCN-3 Test Executor was released.\r
228	\r
229	The new features besides the bugfixes are:\r