* emultempl/armelf.em (elf32_arm_add_stub_section): Use

[deliverable/binutils-gdb.git] / gas / ChangeLog

2008-07-04  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-spu.c (md_apply_fix): Handle fully resolved
	BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.

2008-06-25  Peter Bergner  <bergner@vnet.ibm.com>

	* config/tc-ppc.c (parse_cpu): Handle -m464.
	(md_show_usage): Likewise.

2008-06-24  Eric B. Weddington  <eric.weddington@atmel.com>

	Add support for ATtiny13A.
	* config/tc-avr.c (mcu_types): Add attiny13a.
	* doc/c-avr.texi: Likewise.

2008-06-24  Bob Wilson  <bob.wilson@acm.org>
	    Alan Modra  <amodra@bigpond.net.au>

	* write.c (relax_segment <rs_org>): Include current stretch
	value when calculating whether .org is backwards.

2008-06-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2008-06-17  Nick Clifton  <nickc@redhat.com>

	* app.c (do_scrub_chars): Do not UNGET an EOF value.

2008-06-16  Hans-Peter Nilsson  <hp@bitrange.com>

	PR gas/6607
	* config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
	text_section.  Do the "stepping backwards" test for text_section
	using unsigned operands.

2008-06-13  Peter Bergner  <bergner@vnet.ibm.com>

	* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
	(ppc_insert_operand): Likewise.
	(ppc_machine): Likewise.
	* config/tc-ppc.h: #include "opcode/ppc.h"
	(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
	(ppc_cpu): Update extern decl.

2008-06-12  Adam Nemet  <anemet@caviumnetworks.com>

	* config/tc-mips.c (validate_mips_insn): Handle field descriptors
	+x, +X, +p, +P, +s, +S.
	(mips_ip): Likewise.

	* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
	(mips_ip): Likewise.
	(macro_build): Likewise.
	(CPU_HAS_SEQ): New macro.
	(macro2) <M_SEQ_I, M_SNE_I>: Use it.  Emit seq/sne and seqi/snei.

2008-06-09  Eric B. Weddington  <eric.weddington@atmel.com>

	* config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
	* doc/c-avr.texi: Likewise.

2008-06-04  Nick Clifton  <nickc@redhat.com>

	* app.c (do_scrub_chars): Do not UNGET an EOF value.

2008-06-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (set_sse_check): New.
	(md_pseudo_table): Add "sse_check".

2008-06-03  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_t_rbit): Populate both rm fields.

2008-05-30  Nick Clifton  <nickc@redhat.com>

	PR 5523
	* config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
	relocs here.

2008-05-29  Maxim Kuvyrkov  <maxim@codesourcery.com>

	* config/tc-mips.c (mips_cpu_info_table): Move records for
	ST Loongson-2E/2F processors to a better place.

2008-05-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/6518
	* config/tc-i386.c (match_template): Report ambiguous operand
	size, not invalid suffix when there is no match in Intel
	syntax.

2008-05-22  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (parse_cond): Covert to lowercase before matching.

2008-05-21  I-Jui Sung  <ijsung@gmail.com>

	* config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
	compatible cores: fa526, fa626, fa626te, fa726te.
	* doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
	fa726te} options.

2008-05-14  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2008-05-09  Catherine Moore  <clm@codesourcery.com>

	* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
	with non-MIPS16 relocs.

2008-05-09  Chao-ying Fu  <fu@mips.com>

	* config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
	case that some characters append at the end of the name.
	(mips_ip): Likewise.
	(s_change_sec): Likewise.
	(md_section_align): Likewise.

2008-05-07  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xtensa_create_property_segments): Use
	xtensa_make_property_section instead of xtensa_get_property_section.
	(xtensa_create_xproperty_segments): Likewise.

2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention XSAVE, EPT and MOVBE.

	* config/tc-i386.c (cpu_arch): Add .movbe and .ept.
	(md_show_usage): Add .movbe and .ept.

	* doc/c-i386.texi: Add movbe and ept to -march=.  Document
	.movbe and .ept.

2008-04-29  David S. Miller  <davem@davemloft.net>

	* config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.

2008-04-28  Adam Nemet  <anemet@caviumnetworks.com>

	* config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
	New statics.
	(OPTION_ELF_BASE): Make room for new option macros.
	(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
	OPTION_DOUBLE_FLOAT): New option macros.
	(md_longopts): Add msoft-float, mhard-float, msingle-float and
	mdouble-float.
	(md_parse_option): Handle OPTION_SINGLE_FLOAT,
	OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
	(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
	and -mdouble-float.
	(struct mips_set_options): New fields soft_float and single_float.
	(mips_opts): Initialized them.  Add comment for each field
	initializer.
	(mips_after_parse_args): Set them based on file_mips_soft_float
	and file_mips_single_float.
	(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
	`.set singlefloat' and `.set doublefloat'.
	(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
	Handle single-float and soft-float instructions here.
	(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
	(is_opcode_valid_16): New function.
	(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
	(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
	M_S_DOB>: Remove special-casing of r4650.
	* doc/c-mips.texi (-march=): Add Octeon.
	(MIPS Opts): Document -msoft-float and -mhard-float.  Document
	-msingle-float and -mdouble-float.
	(MIPS floating-point): New section.  Document `.set softfloat' and
	`.set hardfloat'.  Document `.set singlefloat' and `.set
	doublefloat'.

2008-04-25  David S. Miller  <davem@davemloft.net>

	* config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
	%asr aliases.

	* doc/c-sparc.texi: Consistently refer to architecture 'versions',
	rather than occaisionally 'levels'.  Consistently refer to Sun's
	UNIX variant as SunOS, every version of Solaris is also SunOS.
	Document new 'softint_clear' and 'softint_set' aliases.  Clarify
	which architecture versions support '%dcr', '%cq', and '%gl'. Add
	section on 32-bit/64-bit opcode translations.

2008-04-23  Mike Frysinger  <vapier@gentoo.org>

	* Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
	(OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
	(obj-fdpicelf.o): Define.
	* Makefile.in: Regenerate.
	* configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
	(bfin-*-*): Delete.
	(bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
	(bfin-*-uclinux*): New; set fmt to elf and em to linux.
	* config/obj-fdpicelf.c: New.
	* config/obj-fdpicelf.h: Likewise.
	* config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
	the OBJ_FDPIC_ELF define.
	(OPTION_NOPIC): Define.
	(md_longopts): Add mnopic and mno-fdpic.
	(md_parse_option): Handle OPTION_NOPIC.

2008-04-23  Paolo Bonzini  <bonzini@gnu.org>

	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2008-04-23  David S. Miller  <davem@davemloft.net>

	* config/tc-sparc.c (v9a_asr_table): Add missing
	'stick' and 'stick_cmpr', and document ordering rules
	of table.
	(tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
	BFD_RELOC_SPARC_PC10.
	* doc/c-sparc.texi: New section on Sparc constants.
	Add documentation for %stick and %stick_cmpr.

2008-04-22  David S. Miller  <davem@davemloft.net>

	* config/obj-elf.c (obj_elf_section_type): Add prototype
	before obj_elf_section_word and add 'warn' arg.
	(obj_elf_section_word): Add type pointer arg, and if no #SECTION
	is matched, try checking for #SECTION_TYPE.
	(obj_elf_section): Adjust for new args.
	(obj_elf_type_name): New function.
	(obj_elf_type): Call it, and accept STT_foo number strings
	in .type statements as output by SunPRO compiler.

2008-04-22  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_assemble): Don't check SSE instructions
	if noavx is 0.

2008-04-18  David S. Miller  <davem@davemloft.net>

	* doc/c-sparc.texi: Add syntax section.

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
	REG and NDS for instructions with immediate operand.

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
	FMA.

2008-04-16  David S. Miller  <davem@davemloft.net>

	* config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
	and relocation generation.
	(tc_gen_reloc): Likewise.

2008-04-15  Andrew Stubbs  <andrew.stubbs@st.com>

	* config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
	relocations are properly aligned, and not negative.

2008-04-15  Khem Raj  <kraj@mvista.com>

	* doc/tc-arm.texi: Fix fnstart and fnend directive names.

2008-04-14  Edmar Wienskoski  <edmar@freescale.com>

	* config/tc-ppc.c (parse_cpu): Handle "e500mc".  Extend "e500" to
	accept e500mc instructions.
	(md_show_usage): Document -me500mc.

2008-04-11  Nick Clifton  <nickc@redhat.com>

	* listing.c (print_timestamp): Use localtime rather than
	localtime_r since not all build environments provide the latter.

2008-04-10  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention -msse-check=[none|error|warning].

	* config/tc-i386.c (sse_check): New.
	(OPTION_MSSE_CHECK): Likewise.
	(md_assemble): Check SSE instructions if needed.
	(md_longopts): Add -msse-check.
	(md_parse_option): Handle OPTION_MSSE_CHECK.
	(md_show_usage): Show -msse-check=[none|error|warning].

	* doc/c-i386.texi: Document -msse-check=[none|error|warning].