Commit | Line | Data |
---|---|---|
252b5132 | 1 | /* tc-mips.c -- assemble code for a MIPS chip. |
81912461 | 2 | Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
e407c74b | 3 | 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 |
c67a084a | 4 | Free Software Foundation, Inc. |
252b5132 RH |
5 | Contributed by the OSF and Ralph Campbell. |
6 | Written by Keith Knowles and Ralph Campbell, working independently. | |
7 | Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus | |
8 | Support. | |
9 | ||
10 | This file is part of GAS. | |
11 | ||
12 | GAS is free software; you can redistribute it and/or modify | |
13 | it under the terms of the GNU General Public License as published by | |
ec2655a6 | 14 | the Free Software Foundation; either version 3, or (at your option) |
252b5132 RH |
15 | any later version. |
16 | ||
17 | GAS is distributed in the hope that it will be useful, | |
18 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | GNU General Public License for more details. | |
21 | ||
22 | You should have received a copy of the GNU General Public License | |
23 | along with GAS; see the file COPYING. If not, write to the Free | |
4b4da160 NC |
24 | Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA |
25 | 02110-1301, USA. */ | |
252b5132 RH |
26 | |
27 | #include "as.h" | |
28 | #include "config.h" | |
29 | #include "subsegs.h" | |
3882b010 | 30 | #include "safe-ctype.h" |
252b5132 | 31 | |
252b5132 RH |
32 | #include "opcode/mips.h" |
33 | #include "itbl-ops.h" | |
c5dd6aab | 34 | #include "dwarf2dbg.h" |
5862107c | 35 | #include "dw2gencfi.h" |
252b5132 | 36 | |
42429eac RS |
37 | /* Check assumptions made in this file. */ |
38 | typedef char static_assert1[sizeof (offsetT) < 8 ? -1 : 1]; | |
39 | typedef char static_assert2[sizeof (valueT) < 8 ? -1 : 1]; | |
40 | ||
252b5132 RH |
41 | #ifdef DEBUG |
42 | #define DBG(x) printf x | |
43 | #else | |
44 | #define DBG(x) | |
45 | #endif | |
46 | ||
9e12b7a2 RS |
47 | #define SKIP_SPACE_TABS(S) \ |
48 | do { while (*(S) == ' ' || *(S) == '\t') ++(S); } while (0) | |
49 | ||
252b5132 | 50 | /* Clean up namespace so we can include obj-elf.h too. */ |
17a2f251 TS |
51 | static int mips_output_flavor (void); |
52 | static int mips_output_flavor (void) { return OUTPUT_FLAVOR; } | |
252b5132 RH |
53 | #undef OBJ_PROCESS_STAB |
54 | #undef OUTPUT_FLAVOR | |
55 | #undef S_GET_ALIGN | |
56 | #undef S_GET_SIZE | |
57 | #undef S_SET_ALIGN | |
58 | #undef S_SET_SIZE | |
252b5132 RH |
59 | #undef obj_frob_file |
60 | #undef obj_frob_file_after_relocs | |
61 | #undef obj_frob_symbol | |
62 | #undef obj_pop_insert | |
63 | #undef obj_sec_sym_ok_for_reloc | |
64 | #undef OBJ_COPY_SYMBOL_ATTRIBUTES | |
65 | ||
66 | #include "obj-elf.h" | |
67 | /* Fix any of them that we actually care about. */ | |
68 | #undef OUTPUT_FLAVOR | |
69 | #define OUTPUT_FLAVOR mips_output_flavor() | |
252b5132 | 70 | |
252b5132 | 71 | #include "elf/mips.h" |
252b5132 RH |
72 | |
73 | #ifndef ECOFF_DEBUGGING | |
74 | #define NO_ECOFF_DEBUGGING | |
75 | #define ECOFF_DEBUGGING 0 | |
76 | #endif | |
77 | ||
ecb4347a DJ |
78 | int mips_flag_mdebug = -1; |
79 | ||
dcd410fe RO |
80 | /* Control generation of .pdr sections. Off by default on IRIX: the native |
81 | linker doesn't know about and discards them, but relocations against them | |
82 | remain, leading to rld crashes. */ | |
83 | #ifdef TE_IRIX | |
84 | int mips_flag_pdr = FALSE; | |
85 | #else | |
86 | int mips_flag_pdr = TRUE; | |
87 | #endif | |
88 | ||
252b5132 RH |
89 | #include "ecoff.h" |
90 | ||
252b5132 | 91 | static char *mips_regmask_frag; |
252b5132 | 92 | |
85b51719 | 93 | #define ZERO 0 |
741fe287 | 94 | #define ATREG 1 |
df58fc94 RS |
95 | #define S0 16 |
96 | #define S7 23 | |
252b5132 RH |
97 | #define TREG 24 |
98 | #define PIC_CALL_REG 25 | |
99 | #define KT0 26 | |
100 | #define KT1 27 | |
101 | #define GP 28 | |
102 | #define SP 29 | |
103 | #define FP 30 | |
104 | #define RA 31 | |
105 | ||
106 | #define ILLEGAL_REG (32) | |
107 | ||
741fe287 MR |
108 | #define AT mips_opts.at |
109 | ||
252b5132 RH |
110 | extern int target_big_endian; |
111 | ||
252b5132 | 112 | /* The name of the readonly data section. */ |
e8044f35 | 113 | #define RDATA_SECTION_NAME ".rodata" |
252b5132 | 114 | |
a4e06468 RS |
115 | /* Ways in which an instruction can be "appended" to the output. */ |
116 | enum append_method { | |
117 | /* Just add it normally. */ | |
118 | APPEND_ADD, | |
119 | ||
120 | /* Add it normally and then add a nop. */ | |
121 | APPEND_ADD_WITH_NOP, | |
122 | ||
123 | /* Turn an instruction with a delay slot into a "compact" version. */ | |
124 | APPEND_ADD_COMPACT, | |
125 | ||
126 | /* Insert the instruction before the last one. */ | |
127 | APPEND_SWAP | |
128 | }; | |
129 | ||
47e39b9d RS |
130 | /* Information about an instruction, including its format, operands |
131 | and fixups. */ | |
132 | struct mips_cl_insn | |
133 | { | |
134 | /* The opcode's entry in mips_opcodes or mips16_opcodes. */ | |
135 | const struct mips_opcode *insn_mo; | |
136 | ||
47e39b9d | 137 | /* The 16-bit or 32-bit bitstring of the instruction itself. This is |
5c04167a RS |
138 | a copy of INSN_MO->match with the operands filled in. If we have |
139 | decided to use an extended MIPS16 instruction, this includes the | |
140 | extension. */ | |
47e39b9d RS |
141 | unsigned long insn_opcode; |
142 | ||
143 | /* The frag that contains the instruction. */ | |
144 | struct frag *frag; | |
145 | ||
146 | /* The offset into FRAG of the first instruction byte. */ | |
147 | long where; | |
148 | ||
149 | /* The relocs associated with the instruction, if any. */ | |
150 | fixS *fixp[3]; | |
151 | ||
a38419a5 RS |
152 | /* True if this entry cannot be moved from its current position. */ |
153 | unsigned int fixed_p : 1; | |
47e39b9d | 154 | |
708587a4 | 155 | /* True if this instruction occurred in a .set noreorder block. */ |
47e39b9d RS |
156 | unsigned int noreorder_p : 1; |
157 | ||
2fa15973 RS |
158 | /* True for mips16 instructions that jump to an absolute address. */ |
159 | unsigned int mips16_absolute_jump_p : 1; | |
15be625d CM |
160 | |
161 | /* True if this instruction is complete. */ | |
162 | unsigned int complete_p : 1; | |
e407c74b NC |
163 | |
164 | /* True if this instruction is cleared from history by unconditional | |
165 | branch. */ | |
166 | unsigned int cleared_p : 1; | |
47e39b9d RS |
167 | }; |
168 | ||
a325df1d TS |
169 | /* The ABI to use. */ |
170 | enum mips_abi_level | |
171 | { | |
172 | NO_ABI = 0, | |
173 | O32_ABI, | |
174 | O64_ABI, | |
175 | N32_ABI, | |
176 | N64_ABI, | |
177 | EABI_ABI | |
178 | }; | |
179 | ||
180 | /* MIPS ABI we are using for this output file. */ | |
316f5878 | 181 | static enum mips_abi_level mips_abi = NO_ABI; |
a325df1d | 182 | |
143d77c5 EC |
183 | /* Whether or not we have code that can call pic code. */ |
184 | int mips_abicalls = FALSE; | |
185 | ||
aa6975fb ILT |
186 | /* Whether or not we have code which can be put into a shared |
187 | library. */ | |
188 | static bfd_boolean mips_in_shared = TRUE; | |
189 | ||
252b5132 RH |
190 | /* This is the set of options which may be modified by the .set |
191 | pseudo-op. We use a struct so that .set push and .set pop are more | |
192 | reliable. */ | |
193 | ||
e972090a NC |
194 | struct mips_set_options |
195 | { | |
252b5132 RH |
196 | /* MIPS ISA (Instruction Set Architecture) level. This is set to -1 |
197 | if it has not been initialized. Changed by `.set mipsN', and the | |
198 | -mipsN command line option, and the default CPU. */ | |
199 | int isa; | |
846ef2d0 RS |
200 | /* Enabled Application Specific Extensions (ASEs). Changed by `.set |
201 | <asename>', by command line options, and based on the default | |
202 | architecture. */ | |
203 | int ase; | |
252b5132 RH |
204 | /* Whether we are assembling for the mips16 processor. 0 if we are |
205 | not, 1 if we are, and -1 if the value has not been initialized. | |
206 | Changed by `.set mips16' and `.set nomips16', and the -mips16 and | |
207 | -nomips16 command line options, and the default CPU. */ | |
208 | int mips16; | |
df58fc94 RS |
209 | /* Whether we are assembling for the mipsMIPS ASE. 0 if we are not, |
210 | 1 if we are, and -1 if the value has not been initialized. Changed | |
211 | by `.set micromips' and `.set nomicromips', and the -mmicromips | |
212 | and -mno-micromips command line options, and the default CPU. */ | |
213 | int micromips; | |
252b5132 RH |
214 | /* Non-zero if we should not reorder instructions. Changed by `.set |
215 | reorder' and `.set noreorder'. */ | |
216 | int noreorder; | |
741fe287 MR |
217 | /* Non-zero if we should not permit the register designated "assembler |
218 | temporary" to be used in instructions. The value is the register | |
219 | number, normally $at ($1). Changed by `.set at=REG', `.set noat' | |
220 | (same as `.set at=$0') and `.set at' (same as `.set at=$1'). */ | |
221 | unsigned int at; | |
252b5132 RH |
222 | /* Non-zero if we should warn when a macro instruction expands into |
223 | more than one machine instruction. Changed by `.set nomacro' and | |
224 | `.set macro'. */ | |
225 | int warn_about_macros; | |
226 | /* Non-zero if we should not move instructions. Changed by `.set | |
227 | move', `.set volatile', `.set nomove', and `.set novolatile'. */ | |
228 | int nomove; | |
229 | /* Non-zero if we should not optimize branches by moving the target | |
230 | of the branch into the delay slot. Actually, we don't perform | |
231 | this optimization anyhow. Changed by `.set bopt' and `.set | |
232 | nobopt'. */ | |
233 | int nobopt; | |
234 | /* Non-zero if we should not autoextend mips16 instructions. | |
235 | Changed by `.set autoextend' and `.set noautoextend'. */ | |
236 | int noautoextend; | |
833794fc MR |
237 | /* True if we should only emit 32-bit microMIPS instructions. |
238 | Changed by `.set insn32' and `.set noinsn32', and the -minsn32 | |
239 | and -mno-insn32 command line options. */ | |
240 | bfd_boolean insn32; | |
a325df1d TS |
241 | /* Restrict general purpose registers and floating point registers |
242 | to 32 bit. This is initially determined when -mgp32 or -mfp32 | |
243 | is passed but can changed if the assembler code uses .set mipsN. */ | |
244 | int gp32; | |
245 | int fp32; | |
fef14a42 TS |
246 | /* MIPS architecture (CPU) type. Changed by .set arch=FOO, the -march |
247 | command line option, and the default CPU. */ | |
248 | int arch; | |
aed1a261 RS |
249 | /* True if ".set sym32" is in effect. */ |
250 | bfd_boolean sym32; | |
037b32b9 AN |
251 | /* True if floating-point operations are not allowed. Changed by .set |
252 | softfloat or .set hardfloat, by command line options -msoft-float or | |
253 | -mhard-float. The default is false. */ | |
254 | bfd_boolean soft_float; | |
255 | ||
256 | /* True if only single-precision floating-point operations are allowed. | |
257 | Changed by .set singlefloat or .set doublefloat, command-line options | |
258 | -msingle-float or -mdouble-float. The default is false. */ | |
259 | bfd_boolean single_float; | |
252b5132 RH |
260 | }; |
261 | ||
037b32b9 AN |
262 | /* This is the struct we use to hold the current set of options. Note |
263 | that we must set the isa field to ISA_UNKNOWN and the ASE fields to | |
264 | -1 to indicate that they have not been initialized. */ | |
265 | ||
a325df1d | 266 | /* True if -mgp32 was passed. */ |
a8e8e863 | 267 | static int file_mips_gp32 = -1; |
a325df1d TS |
268 | |
269 | /* True if -mfp32 was passed. */ | |
a8e8e863 | 270 | static int file_mips_fp32 = -1; |
a325df1d | 271 | |
037b32b9 AN |
272 | /* 1 if -msoft-float, 0 if -mhard-float. The default is 0. */ |
273 | static int file_mips_soft_float = 0; | |
274 | ||
275 | /* 1 if -msingle-float, 0 if -mdouble-float. The default is 0. */ | |
276 | static int file_mips_single_float = 0; | |
252b5132 | 277 | |
ba92f887 MR |
278 | /* True if -mnan=2008, false if -mnan=legacy. */ |
279 | static bfd_boolean mips_flag_nan2008 = FALSE; | |
280 | ||
e972090a NC |
281 | static struct mips_set_options mips_opts = |
282 | { | |
846ef2d0 | 283 | /* isa */ ISA_UNKNOWN, /* ase */ 0, /* mips16 */ -1, /* micromips */ -1, |
b015e599 | 284 | /* noreorder */ 0, /* at */ ATREG, /* warn_about_macros */ 0, |
833794fc MR |
285 | /* nomove */ 0, /* nobopt */ 0, /* noautoextend */ 0, /* insn32 */ FALSE, |
286 | /* gp32 */ 0, /* fp32 */ 0, /* arch */ CPU_UNKNOWN, /* sym32 */ FALSE, | |
b015e599 | 287 | /* soft_float */ FALSE, /* single_float */ FALSE |
e7af610e | 288 | }; |
252b5132 | 289 | |
846ef2d0 RS |
290 | /* The set of ASEs that were selected on the command line, either |
291 | explicitly via ASE options or implicitly through things like -march. */ | |
292 | static unsigned int file_ase; | |
293 | ||
294 | /* Which bits of file_ase were explicitly set or cleared by ASE options. */ | |
295 | static unsigned int file_ase_explicit; | |
296 | ||
252b5132 RH |
297 | /* These variables are filled in with the masks of registers used. |
298 | The object format code reads them and puts them in the appropriate | |
299 | place. */ | |
300 | unsigned long mips_gprmask; | |
301 | unsigned long mips_cprmask[4]; | |
302 | ||
303 | /* MIPS ISA we are using for this output file. */ | |
e7af610e | 304 | static int file_mips_isa = ISA_UNKNOWN; |
252b5132 | 305 | |
738f4d98 | 306 | /* True if any MIPS16 code was produced. */ |
a4672219 TS |
307 | static int file_ase_mips16; |
308 | ||
3994f87e TS |
309 | #define ISA_SUPPORTS_MIPS16E (mips_opts.isa == ISA_MIPS32 \ |
310 | || mips_opts.isa == ISA_MIPS32R2 \ | |
311 | || mips_opts.isa == ISA_MIPS64 \ | |
312 | || mips_opts.isa == ISA_MIPS64R2) | |
313 | ||
df58fc94 RS |
314 | /* True if any microMIPS code was produced. */ |
315 | static int file_ase_micromips; | |
316 | ||
b12dd2e4 CF |
317 | /* True if we want to create R_MIPS_JALR for jalr $25. */ |
318 | #ifdef TE_IRIX | |
1180b5a4 | 319 | #define MIPS_JALR_HINT_P(EXPR) HAVE_NEWABI |
b12dd2e4 | 320 | #else |
1180b5a4 RS |
321 | /* As a GNU extension, we use R_MIPS_JALR for o32 too. However, |
322 | because there's no place for any addend, the only acceptable | |
323 | expression is a bare symbol. */ | |
324 | #define MIPS_JALR_HINT_P(EXPR) \ | |
325 | (!HAVE_IN_PLACE_ADDENDS \ | |
326 | || ((EXPR)->X_op == O_symbol && (EXPR)->X_add_number == 0)) | |
b12dd2e4 CF |
327 | #endif |
328 | ||
ec68c924 | 329 | /* The argument of the -march= flag. The architecture we are assembling. */ |
fef14a42 | 330 | static int file_mips_arch = CPU_UNKNOWN; |
316f5878 | 331 | static const char *mips_arch_string; |
ec68c924 EC |
332 | |
333 | /* The argument of the -mtune= flag. The architecture for which we | |
334 | are optimizing. */ | |
335 | static int mips_tune = CPU_UNKNOWN; | |
316f5878 | 336 | static const char *mips_tune_string; |
ec68c924 | 337 | |
316f5878 | 338 | /* True when generating 32-bit code for a 64-bit processor. */ |
252b5132 RH |
339 | static int mips_32bitmode = 0; |
340 | ||
316f5878 RS |
341 | /* True if the given ABI requires 32-bit registers. */ |
342 | #define ABI_NEEDS_32BIT_REGS(ABI) ((ABI) == O32_ABI) | |
343 | ||
344 | /* Likewise 64-bit registers. */ | |
707bfff6 TS |
345 | #define ABI_NEEDS_64BIT_REGS(ABI) \ |
346 | ((ABI) == N32_ABI \ | |
347 | || (ABI) == N64_ABI \ | |
316f5878 RS |
348 | || (ABI) == O64_ABI) |
349 | ||
ad3fea08 | 350 | /* Return true if ISA supports 64 bit wide gp registers. */ |
707bfff6 TS |
351 | #define ISA_HAS_64BIT_REGS(ISA) \ |
352 | ((ISA) == ISA_MIPS3 \ | |
353 | || (ISA) == ISA_MIPS4 \ | |
354 | || (ISA) == ISA_MIPS5 \ | |
355 | || (ISA) == ISA_MIPS64 \ | |
356 | || (ISA) == ISA_MIPS64R2) | |
9ce8a5dd | 357 | |
ad3fea08 TS |
358 | /* Return true if ISA supports 64 bit wide float registers. */ |
359 | #define ISA_HAS_64BIT_FPRS(ISA) \ | |
360 | ((ISA) == ISA_MIPS3 \ | |
361 | || (ISA) == ISA_MIPS4 \ | |
362 | || (ISA) == ISA_MIPS5 \ | |
363 | || (ISA) == ISA_MIPS32R2 \ | |
364 | || (ISA) == ISA_MIPS64 \ | |
365 | || (ISA) == ISA_MIPS64R2) | |
366 | ||
af7ee8bf CD |
367 | /* Return true if ISA supports 64-bit right rotate (dror et al.) |
368 | instructions. */ | |
707bfff6 | 369 | #define ISA_HAS_DROR(ISA) \ |
df58fc94 RS |
370 | ((ISA) == ISA_MIPS64R2 \ |
371 | || (mips_opts.micromips \ | |
372 | && ISA_HAS_64BIT_REGS (ISA)) \ | |
373 | ) | |
af7ee8bf CD |
374 | |
375 | /* Return true if ISA supports 32-bit right rotate (ror et al.) | |
376 | instructions. */ | |
707bfff6 TS |
377 | #define ISA_HAS_ROR(ISA) \ |
378 | ((ISA) == ISA_MIPS32R2 \ | |
379 | || (ISA) == ISA_MIPS64R2 \ | |
846ef2d0 | 380 | || (mips_opts.ase & ASE_SMARTMIPS) \ |
df58fc94 RS |
381 | || mips_opts.micromips \ |
382 | ) | |
707bfff6 | 383 | |
7455baf8 TS |
384 | /* Return true if ISA supports single-precision floats in odd registers. */ |
385 | #define ISA_HAS_ODD_SINGLE_FPR(ISA) \ | |
386 | ((ISA) == ISA_MIPS32 \ | |
387 | || (ISA) == ISA_MIPS32R2 \ | |
388 | || (ISA) == ISA_MIPS64 \ | |
389 | || (ISA) == ISA_MIPS64R2) | |
af7ee8bf | 390 | |
ad3fea08 TS |
391 | /* Return true if ISA supports move to/from high part of a 64-bit |
392 | floating-point register. */ | |
393 | #define ISA_HAS_MXHC1(ISA) \ | |
394 | ((ISA) == ISA_MIPS32R2 \ | |
395 | || (ISA) == ISA_MIPS64R2) | |
396 | ||
e013f690 | 397 | #define HAVE_32BIT_GPRS \ |
ad3fea08 | 398 | (mips_opts.gp32 || !ISA_HAS_64BIT_REGS (mips_opts.isa)) |
ca4e0257 | 399 | |
e013f690 | 400 | #define HAVE_32BIT_FPRS \ |
ad3fea08 | 401 | (mips_opts.fp32 || !ISA_HAS_64BIT_FPRS (mips_opts.isa)) |
ca4e0257 | 402 | |
ad3fea08 TS |
403 | #define HAVE_64BIT_GPRS (!HAVE_32BIT_GPRS) |
404 | #define HAVE_64BIT_FPRS (!HAVE_32BIT_FPRS) | |
ca4e0257 | 405 | |
316f5878 | 406 | #define HAVE_NEWABI (mips_abi == N32_ABI || mips_abi == N64_ABI) |
e013f690 | 407 | |
316f5878 | 408 | #define HAVE_64BIT_OBJECTS (mips_abi == N64_ABI) |
e013f690 | 409 | |
3b91255e RS |
410 | /* True if relocations are stored in-place. */ |
411 | #define HAVE_IN_PLACE_ADDENDS (!HAVE_NEWABI) | |
412 | ||
aed1a261 RS |
413 | /* The ABI-derived address size. */ |
414 | #define HAVE_64BIT_ADDRESSES \ | |
415 | (HAVE_64BIT_GPRS && (mips_abi == EABI_ABI || mips_abi == N64_ABI)) | |
416 | #define HAVE_32BIT_ADDRESSES (!HAVE_64BIT_ADDRESSES) | |
e013f690 | 417 | |
aed1a261 RS |
418 | /* The size of symbolic constants (i.e., expressions of the form |
419 | "SYMBOL" or "SYMBOL + OFFSET"). */ | |
420 | #define HAVE_32BIT_SYMBOLS \ | |
421 | (HAVE_32BIT_ADDRESSES || !HAVE_64BIT_OBJECTS || mips_opts.sym32) | |
422 | #define HAVE_64BIT_SYMBOLS (!HAVE_32BIT_SYMBOLS) | |
ca4e0257 | 423 | |
b7c7d6c1 TS |
424 | /* Addresses are loaded in different ways, depending on the address size |
425 | in use. The n32 ABI Documentation also mandates the use of additions | |
426 | with overflow checking, but existing implementations don't follow it. */ | |
f899b4b8 | 427 | #define ADDRESS_ADD_INSN \ |
b7c7d6c1 | 428 | (HAVE_32BIT_ADDRESSES ? "addu" : "daddu") |
f899b4b8 TS |
429 | |
430 | #define ADDRESS_ADDI_INSN \ | |
b7c7d6c1 | 431 | (HAVE_32BIT_ADDRESSES ? "addiu" : "daddiu") |
f899b4b8 TS |
432 | |
433 | #define ADDRESS_LOAD_INSN \ | |
434 | (HAVE_32BIT_ADDRESSES ? "lw" : "ld") | |
435 | ||
436 | #define ADDRESS_STORE_INSN \ | |
437 | (HAVE_32BIT_ADDRESSES ? "sw" : "sd") | |
438 | ||
a4672219 | 439 | /* Return true if the given CPU supports the MIPS16 ASE. */ |
3396de36 TS |
440 | #define CPU_HAS_MIPS16(cpu) \ |
441 | (strncmp (TARGET_CPU, "mips16", sizeof ("mips16") - 1) == 0 \ | |
442 | || strncmp (TARGET_CANONICAL, "mips-lsi-elf", sizeof ("mips-lsi-elf") - 1) == 0) | |
a4672219 | 443 | |
2309ddf2 | 444 | /* Return true if the given CPU supports the microMIPS ASE. */ |
df58fc94 RS |
445 | #define CPU_HAS_MICROMIPS(cpu) 0 |
446 | ||
60b63b72 RS |
447 | /* True if CPU has a dror instruction. */ |
448 | #define CPU_HAS_DROR(CPU) ((CPU) == CPU_VR5400 || (CPU) == CPU_VR5500) | |
449 | ||
450 | /* True if CPU has a ror instruction. */ | |
451 | #define CPU_HAS_ROR(CPU) CPU_HAS_DROR (CPU) | |
452 | ||
dd6a37e7 | 453 | /* True if CPU is in the Octeon family */ |
432233b3 | 454 | #define CPU_IS_OCTEON(CPU) ((CPU) == CPU_OCTEON || (CPU) == CPU_OCTEONP || (CPU) == CPU_OCTEON2) |
dd6a37e7 | 455 | |
dd3cbb7e | 456 | /* True if CPU has seq/sne and seqi/snei instructions. */ |
dd6a37e7 | 457 | #define CPU_HAS_SEQ(CPU) (CPU_IS_OCTEON (CPU)) |
dd3cbb7e | 458 | |
0aa27725 RS |
459 | /* True, if CPU has support for ldc1 and sdc1. */ |
460 | #define CPU_HAS_LDC1_SDC1(CPU) \ | |
461 | ((mips_opts.isa != ISA_MIPS1) && ((CPU) != CPU_R5900)) | |
462 | ||
c8978940 CD |
463 | /* True if mflo and mfhi can be immediately followed by instructions |
464 | which write to the HI and LO registers. | |
465 | ||
466 | According to MIPS specifications, MIPS ISAs I, II, and III need | |
467 | (at least) two instructions between the reads of HI/LO and | |
468 | instructions which write them, and later ISAs do not. Contradicting | |
469 | the MIPS specifications, some MIPS IV processor user manuals (e.g. | |
470 | the UM for the NEC Vr5000) document needing the instructions between | |
471 | HI/LO reads and writes, as well. Therefore, we declare only MIPS32, | |
472 | MIPS64 and later ISAs to have the interlocks, plus any specific | |
473 | earlier-ISA CPUs for which CPU documentation declares that the | |
474 | instructions are really interlocked. */ | |
475 | #define hilo_interlocks \ | |
476 | (mips_opts.isa == ISA_MIPS32 \ | |
477 | || mips_opts.isa == ISA_MIPS32R2 \ | |
478 | || mips_opts.isa == ISA_MIPS64 \ | |
479 | || mips_opts.isa == ISA_MIPS64R2 \ | |
480 | || mips_opts.arch == CPU_R4010 \ | |
e407c74b | 481 | || mips_opts.arch == CPU_R5900 \ |
c8978940 CD |
482 | || mips_opts.arch == CPU_R10000 \ |
483 | || mips_opts.arch == CPU_R12000 \ | |
3aa3176b TS |
484 | || mips_opts.arch == CPU_R14000 \ |
485 | || mips_opts.arch == CPU_R16000 \ | |
c8978940 | 486 | || mips_opts.arch == CPU_RM7000 \ |
c8978940 | 487 | || mips_opts.arch == CPU_VR5500 \ |
df58fc94 | 488 | || mips_opts.micromips \ |
c8978940 | 489 | ) |
252b5132 RH |
490 | |
491 | /* Whether the processor uses hardware interlocks to protect reads | |
81912461 ILT |
492 | from the GPRs after they are loaded from memory, and thus does not |
493 | require nops to be inserted. This applies to instructions marked | |
494 | INSN_LOAD_MEMORY_DELAY. These nops are only required at MIPS ISA | |
df58fc94 RS |
495 | level I and microMIPS mode instructions are always interlocked. */ |
496 | #define gpr_interlocks \ | |
497 | (mips_opts.isa != ISA_MIPS1 \ | |
498 | || mips_opts.arch == CPU_R3900 \ | |
e407c74b | 499 | || mips_opts.arch == CPU_R5900 \ |
df58fc94 RS |
500 | || mips_opts.micromips \ |
501 | ) | |
252b5132 | 502 | |
81912461 ILT |
503 | /* Whether the processor uses hardware interlocks to avoid delays |
504 | required by coprocessor instructions, and thus does not require | |
505 | nops to be inserted. This applies to instructions marked | |
506 | INSN_LOAD_COPROC_DELAY, INSN_COPROC_MOVE_DELAY, and to delays | |
507 | between instructions marked INSN_WRITE_COND_CODE and ones marked | |
508 | INSN_READ_COND_CODE. These nops are only required at MIPS ISA | |
df58fc94 RS |
509 | levels I, II, and III and microMIPS mode instructions are always |
510 | interlocked. */ | |
bdaaa2e1 | 511 | /* Itbl support may require additional care here. */ |
81912461 ILT |
512 | #define cop_interlocks \ |
513 | ((mips_opts.isa != ISA_MIPS1 \ | |
514 | && mips_opts.isa != ISA_MIPS2 \ | |
515 | && mips_opts.isa != ISA_MIPS3) \ | |
516 | || mips_opts.arch == CPU_R4300 \ | |
df58fc94 | 517 | || mips_opts.micromips \ |
81912461 ILT |
518 | ) |
519 | ||
520 | /* Whether the processor uses hardware interlocks to protect reads | |
521 | from coprocessor registers after they are loaded from memory, and | |
522 | thus does not require nops to be inserted. This applies to | |
523 | instructions marked INSN_COPROC_MEMORY_DELAY. These nops are only | |
df58fc94 RS |
524 | requires at MIPS ISA level I and microMIPS mode instructions are |
525 | always interlocked. */ | |
526 | #define cop_mem_interlocks \ | |
527 | (mips_opts.isa != ISA_MIPS1 \ | |
528 | || mips_opts.micromips \ | |
529 | ) | |
252b5132 | 530 | |
6b76fefe CM |
531 | /* Is this a mfhi or mflo instruction? */ |
532 | #define MF_HILO_INSN(PINFO) \ | |
b19e8a9b AN |
533 | ((PINFO & INSN_READ_HI) || (PINFO & INSN_READ_LO)) |
534 | ||
df58fc94 RS |
535 | /* Whether code compression (either of the MIPS16 or the microMIPS ASEs) |
536 | has been selected. This implies, in particular, that addresses of text | |
537 | labels have their LSB set. */ | |
538 | #define HAVE_CODE_COMPRESSION \ | |
539 | ((mips_opts.mips16 | mips_opts.micromips) != 0) | |
540 | ||
42429eac RS |
541 | /* The minimum and maximum signed values that can be stored in a GPR. */ |
542 | #define GPR_SMAX ((offsetT) (((valueT) 1 << (HAVE_64BIT_GPRS ? 63 : 31)) - 1)) | |
543 | #define GPR_SMIN (-GPR_SMAX - 1) | |
544 | ||
252b5132 RH |
545 | /* MIPS PIC level. */ |
546 | ||
a161fe53 | 547 | enum mips_pic_level mips_pic; |
252b5132 | 548 | |
c9914766 | 549 | /* 1 if we should generate 32 bit offsets from the $gp register in |
252b5132 | 550 | SVR4_PIC mode. Currently has no meaning in other modes. */ |
c9914766 | 551 | static int mips_big_got = 0; |
252b5132 RH |
552 | |
553 | /* 1 if trap instructions should used for overflow rather than break | |
554 | instructions. */ | |
c9914766 | 555 | static int mips_trap = 0; |
252b5132 | 556 | |
119d663a | 557 | /* 1 if double width floating point constants should not be constructed |
b6ff326e | 558 | by assembling two single width halves into two single width floating |
119d663a NC |
559 | point registers which just happen to alias the double width destination |
560 | register. On some architectures this aliasing can be disabled by a bit | |
d547a75e | 561 | in the status register, and the setting of this bit cannot be determined |
119d663a NC |
562 | automatically at assemble time. */ |
563 | static int mips_disable_float_construction; | |
564 | ||
252b5132 RH |
565 | /* Non-zero if any .set noreorder directives were used. */ |
566 | ||
567 | static int mips_any_noreorder; | |
568 | ||
6b76fefe CM |
569 | /* Non-zero if nops should be inserted when the register referenced in |
570 | an mfhi/mflo instruction is read in the next two instructions. */ | |
571 | static int mips_7000_hilo_fix; | |
572 | ||
02ffd3e4 | 573 | /* The size of objects in the small data section. */ |
156c2f8b | 574 | static unsigned int g_switch_value = 8; |
252b5132 RH |
575 | /* Whether the -G option was used. */ |
576 | static int g_switch_seen = 0; | |
577 | ||
578 | #define N_RMASK 0xc4 | |
579 | #define N_VFP 0xd4 | |
580 | ||
581 | /* If we can determine in advance that GP optimization won't be | |
582 | possible, we can skip the relaxation stuff that tries to produce | |
583 | GP-relative references. This makes delay slot optimization work | |
584 | better. | |
585 | ||
586 | This function can only provide a guess, but it seems to work for | |
fba2b7f9 GK |
587 | gcc output. It needs to guess right for gcc, otherwise gcc |
588 | will put what it thinks is a GP-relative instruction in a branch | |
589 | delay slot. | |
252b5132 RH |
590 | |
591 | I don't know if a fix is needed for the SVR4_PIC mode. I've only | |
592 | fixed it for the non-PIC mode. KR 95/04/07 */ | |
17a2f251 | 593 | static int nopic_need_relax (symbolS *, int); |
252b5132 RH |
594 | |
595 | /* handle of the OPCODE hash table */ | |
596 | static struct hash_control *op_hash = NULL; | |
597 | ||
598 | /* The opcode hash table we use for the mips16. */ | |
599 | static struct hash_control *mips16_op_hash = NULL; | |
600 | ||
df58fc94 RS |
601 | /* The opcode hash table we use for the microMIPS ASE. */ |
602 | static struct hash_control *micromips_op_hash = NULL; | |
603 | ||
252b5132 RH |
604 | /* This array holds the chars that always start a comment. If the |
605 | pre-processor is disabled, these aren't very useful */ | |
606 | const char comment_chars[] = "#"; | |
607 | ||
608 | /* This array holds the chars that only start a comment at the beginning of | |
609 | a line. If the line seems to have the form '# 123 filename' | |
610 | .line and .file directives will appear in the pre-processed output */ | |
611 | /* Note that input_file.c hand checks for '#' at the beginning of the | |
612 | first line of the input file. This is because the compiler outputs | |
bdaaa2e1 | 613 | #NO_APP at the beginning of its output. */ |
252b5132 RH |
614 | /* Also note that C style comments are always supported. */ |
615 | const char line_comment_chars[] = "#"; | |
616 | ||
bdaaa2e1 | 617 | /* This array holds machine specific line separator characters. */ |
63a0b638 | 618 | const char line_separator_chars[] = ";"; |
252b5132 RH |
619 | |
620 | /* Chars that can be used to separate mant from exp in floating point nums */ | |
621 | const char EXP_CHARS[] = "eE"; | |
622 | ||
623 | /* Chars that mean this number is a floating point constant */ | |
624 | /* As in 0f12.456 */ | |
625 | /* or 0d1.2345e12 */ | |
626 | const char FLT_CHARS[] = "rRsSfFdDxXpP"; | |
627 | ||
628 | /* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be | |
629 | changed in read.c . Ideally it shouldn't have to know about it at all, | |
630 | but nothing is ideal around here. | |
631 | */ | |
632 | ||
e3de51ce RS |
633 | /* Types of printf format used for instruction-related error messages. |
634 | "I" means int ("%d") and "S" means string ("%s"). */ | |
635 | enum mips_insn_error_format { | |
636 | ERR_FMT_PLAIN, | |
637 | ERR_FMT_I, | |
638 | ERR_FMT_SS, | |
639 | }; | |
640 | ||
641 | /* Information about an error that was found while assembling the current | |
642 | instruction. */ | |
643 | struct mips_insn_error { | |
644 | /* We sometimes need to match an instruction against more than one | |
645 | opcode table entry. Errors found during this matching are reported | |
646 | against a particular syntactic argument rather than against the | |
647 | instruction as a whole. We grade these messages so that errors | |
648 | against argument N have a greater priority than an error against | |
649 | any argument < N, since the former implies that arguments up to N | |
650 | were acceptable and that the opcode entry was therefore a closer match. | |
651 | If several matches report an error against the same argument, | |
652 | we only use that error if it is the same in all cases. | |
653 | ||
654 | min_argnum is the minimum argument number for which an error message | |
655 | should be accepted. It is 0 if MSG is against the instruction as | |
656 | a whole. */ | |
657 | int min_argnum; | |
658 | ||
659 | /* The printf()-style message, including its format and arguments. */ | |
660 | enum mips_insn_error_format format; | |
661 | const char *msg; | |
662 | union { | |
663 | int i; | |
664 | const char *ss[2]; | |
665 | } u; | |
666 | }; | |
667 | ||
668 | /* The error that should be reported for the current instruction. */ | |
669 | static struct mips_insn_error insn_error; | |
252b5132 RH |
670 | |
671 | static int auto_align = 1; | |
672 | ||
673 | /* When outputting SVR4 PIC code, the assembler needs to know the | |
674 | offset in the stack frame from which to restore the $gp register. | |
675 | This is set by the .cprestore pseudo-op, and saved in this | |
676 | variable. */ | |
677 | static offsetT mips_cprestore_offset = -1; | |
678 | ||
67c1ffbe | 679 | /* Similar for NewABI PIC code, where $gp is callee-saved. NewABI has some |
6478892d | 680 | more optimizations, it can use a register value instead of a memory-saved |
956cd1d6 | 681 | offset and even an other register than $gp as global pointer. */ |
6478892d TS |
682 | static offsetT mips_cpreturn_offset = -1; |
683 | static int mips_cpreturn_register = -1; | |
684 | static int mips_gp_register = GP; | |
def2e0dd | 685 | static int mips_gprel_offset = 0; |
6478892d | 686 | |
7a621144 DJ |
687 | /* Whether mips_cprestore_offset has been set in the current function |
688 | (or whether it has already been warned about, if not). */ | |
689 | static int mips_cprestore_valid = 0; | |
690 | ||
252b5132 RH |
691 | /* This is the register which holds the stack frame, as set by the |
692 | .frame pseudo-op. This is needed to implement .cprestore. */ | |
693 | static int mips_frame_reg = SP; | |
694 | ||
7a621144 DJ |
695 | /* Whether mips_frame_reg has been set in the current function |
696 | (or whether it has already been warned about, if not). */ | |
697 | static int mips_frame_reg_valid = 0; | |
698 | ||
252b5132 RH |
699 | /* To output NOP instructions correctly, we need to keep information |
700 | about the previous two instructions. */ | |
701 | ||
702 | /* Whether we are optimizing. The default value of 2 means to remove | |
703 | unneeded NOPs and swap branch instructions when possible. A value | |
704 | of 1 means to not swap branches. A value of 0 means to always | |
705 | insert NOPs. */ | |
706 | static int mips_optimize = 2; | |
707 | ||
708 | /* Debugging level. -g sets this to 2. -gN sets this to N. -g0 is | |
709 | equivalent to seeing no -g option at all. */ | |
710 | static int mips_debug = 0; | |
711 | ||
7d8e00cf RS |
712 | /* The maximum number of NOPs needed to avoid the VR4130 mflo/mfhi errata. */ |
713 | #define MAX_VR4130_NOPS 4 | |
714 | ||
715 | /* The maximum number of NOPs needed to fill delay slots. */ | |
716 | #define MAX_DELAY_NOPS 2 | |
717 | ||
718 | /* The maximum number of NOPs needed for any purpose. */ | |
719 | #define MAX_NOPS 4 | |
71400594 RS |
720 | |
721 | /* A list of previous instructions, with index 0 being the most recent. | |
722 | We need to look back MAX_NOPS instructions when filling delay slots | |
723 | or working around processor errata. We need to look back one | |
724 | instruction further if we're thinking about using history[0] to | |
725 | fill a branch delay slot. */ | |
726 | static struct mips_cl_insn history[1 + MAX_NOPS]; | |
252b5132 | 727 | |
fc76e730 | 728 | /* Arrays of operands for each instruction. */ |
14daeee3 | 729 | #define MAX_OPERANDS 6 |
fc76e730 RS |
730 | struct mips_operand_array { |
731 | const struct mips_operand *operand[MAX_OPERANDS]; | |
732 | }; | |
733 | static struct mips_operand_array *mips_operands; | |
734 | static struct mips_operand_array *mips16_operands; | |
735 | static struct mips_operand_array *micromips_operands; | |
736 | ||
1e915849 | 737 | /* Nop instructions used by emit_nop. */ |
df58fc94 RS |
738 | static struct mips_cl_insn nop_insn; |
739 | static struct mips_cl_insn mips16_nop_insn; | |
740 | static struct mips_cl_insn micromips_nop16_insn; | |
741 | static struct mips_cl_insn micromips_nop32_insn; | |
1e915849 RS |
742 | |
743 | /* The appropriate nop for the current mode. */ | |
833794fc MR |
744 | #define NOP_INSN (mips_opts.mips16 \ |
745 | ? &mips16_nop_insn \ | |
746 | : (mips_opts.micromips \ | |
747 | ? (mips_opts.insn32 \ | |
748 | ? µmips_nop32_insn \ | |
749 | : µmips_nop16_insn) \ | |
750 | : &nop_insn)) | |
df58fc94 RS |
751 | |
752 | /* The size of NOP_INSN in bytes. */ | |
833794fc MR |
753 | #define NOP_INSN_SIZE ((mips_opts.mips16 \ |
754 | || (mips_opts.micromips && !mips_opts.insn32)) \ | |
755 | ? 2 : 4) | |
252b5132 | 756 | |
252b5132 RH |
757 | /* If this is set, it points to a frag holding nop instructions which |
758 | were inserted before the start of a noreorder section. If those | |
759 | nops turn out to be unnecessary, the size of the frag can be | |
760 | decreased. */ | |
761 | static fragS *prev_nop_frag; | |
762 | ||
763 | /* The number of nop instructions we created in prev_nop_frag. */ | |
764 | static int prev_nop_frag_holds; | |
765 | ||
766 | /* The number of nop instructions that we know we need in | |
bdaaa2e1 | 767 | prev_nop_frag. */ |
252b5132 RH |
768 | static int prev_nop_frag_required; |
769 | ||
770 | /* The number of instructions we've seen since prev_nop_frag. */ | |
771 | static int prev_nop_frag_since; | |
772 | ||
e8044f35 RS |
773 | /* Relocations against symbols are sometimes done in two parts, with a HI |
774 | relocation and a LO relocation. Each relocation has only 16 bits of | |
775 | space to store an addend. This means that in order for the linker to | |
776 | handle carries correctly, it must be able to locate both the HI and | |
777 | the LO relocation. This means that the relocations must appear in | |
778 | order in the relocation table. | |
252b5132 RH |
779 | |
780 | In order to implement this, we keep track of each unmatched HI | |
781 | relocation. We then sort them so that they immediately precede the | |
bdaaa2e1 | 782 | corresponding LO relocation. */ |
252b5132 | 783 | |
e972090a NC |
784 | struct mips_hi_fixup |
785 | { | |
252b5132 RH |
786 | /* Next HI fixup. */ |
787 | struct mips_hi_fixup *next; | |
788 | /* This fixup. */ | |
789 | fixS *fixp; | |
790 | /* The section this fixup is in. */ | |
791 | segT seg; | |
792 | }; | |
793 | ||
794 | /* The list of unmatched HI relocs. */ | |
795 | ||
796 | static struct mips_hi_fixup *mips_hi_fixup_list; | |
797 | ||
64bdfcaf RS |
798 | /* The frag containing the last explicit relocation operator. |
799 | Null if explicit relocations have not been used. */ | |
800 | ||
801 | static fragS *prev_reloc_op_frag; | |
802 | ||
252b5132 RH |
803 | /* Map mips16 register numbers to normal MIPS register numbers. */ |
804 | ||
e972090a NC |
805 | static const unsigned int mips16_to_32_reg_map[] = |
806 | { | |
252b5132 RH |
807 | 16, 17, 2, 3, 4, 5, 6, 7 |
808 | }; | |
60b63b72 | 809 | |
df58fc94 RS |
810 | /* Map microMIPS register numbers to normal MIPS register numbers. */ |
811 | ||
df58fc94 | 812 | #define micromips_to_32_reg_d_map mips16_to_32_reg_map |
df58fc94 RS |
813 | |
814 | /* The microMIPS registers with type h. */ | |
e76ff5ab | 815 | static const unsigned int micromips_to_32_reg_h_map1[] = |
df58fc94 RS |
816 | { |
817 | 5, 5, 6, 4, 4, 4, 4, 4 | |
818 | }; | |
e76ff5ab | 819 | static const unsigned int micromips_to_32_reg_h_map2[] = |
df58fc94 RS |
820 | { |
821 | 6, 7, 7, 21, 22, 5, 6, 7 | |
822 | }; | |
823 | ||
df58fc94 RS |
824 | /* The microMIPS registers with type m. */ |
825 | static const unsigned int micromips_to_32_reg_m_map[] = | |
826 | { | |
827 | 0, 17, 2, 3, 16, 18, 19, 20 | |
828 | }; | |
829 | ||
830 | #define micromips_to_32_reg_n_map micromips_to_32_reg_m_map | |
831 | ||
71400594 RS |
832 | /* Classifies the kind of instructions we're interested in when |
833 | implementing -mfix-vr4120. */ | |
c67a084a NC |
834 | enum fix_vr4120_class |
835 | { | |
71400594 RS |
836 | FIX_VR4120_MACC, |
837 | FIX_VR4120_DMACC, | |
838 | FIX_VR4120_MULT, | |
839 | FIX_VR4120_DMULT, | |
840 | FIX_VR4120_DIV, | |
841 | FIX_VR4120_MTHILO, | |
842 | NUM_FIX_VR4120_CLASSES | |
843 | }; | |
844 | ||
c67a084a NC |
845 | /* ...likewise -mfix-loongson2f-jump. */ |
846 | static bfd_boolean mips_fix_loongson2f_jump; | |
847 | ||
848 | /* ...likewise -mfix-loongson2f-nop. */ | |
849 | static bfd_boolean mips_fix_loongson2f_nop; | |
850 | ||
851 | /* True if -mfix-loongson2f-nop or -mfix-loongson2f-jump passed. */ | |
852 | static bfd_boolean mips_fix_loongson2f; | |
853 | ||
71400594 RS |
854 | /* Given two FIX_VR4120_* values X and Y, bit Y of element X is set if |
855 | there must be at least one other instruction between an instruction | |
856 | of type X and an instruction of type Y. */ | |
857 | static unsigned int vr4120_conflicts[NUM_FIX_VR4120_CLASSES]; | |
858 | ||
859 | /* True if -mfix-vr4120 is in force. */ | |
d766e8ec | 860 | static int mips_fix_vr4120; |
4a6a3df4 | 861 | |
7d8e00cf RS |
862 | /* ...likewise -mfix-vr4130. */ |
863 | static int mips_fix_vr4130; | |
864 | ||
6a32d874 CM |
865 | /* ...likewise -mfix-24k. */ |
866 | static int mips_fix_24k; | |
867 | ||
d954098f DD |
868 | /* ...likewise -mfix-cn63xxp1 */ |
869 | static bfd_boolean mips_fix_cn63xxp1; | |
870 | ||
4a6a3df4 AO |
871 | /* We don't relax branches by default, since this causes us to expand |
872 | `la .l2 - .l1' if there's a branch between .l1 and .l2, because we | |
873 | fail to compute the offset before expanding the macro to the most | |
874 | efficient expansion. */ | |
875 | ||
876 | static int mips_relax_branch; | |
252b5132 | 877 | \f |
4d7206a2 RS |
878 | /* The expansion of many macros depends on the type of symbol that |
879 | they refer to. For example, when generating position-dependent code, | |
880 | a macro that refers to a symbol may have two different expansions, | |
881 | one which uses GP-relative addresses and one which uses absolute | |
882 | addresses. When generating SVR4-style PIC, a macro may have | |
883 | different expansions for local and global symbols. | |
884 | ||
885 | We handle these situations by generating both sequences and putting | |
886 | them in variant frags. In position-dependent code, the first sequence | |
887 | will be the GP-relative one and the second sequence will be the | |
888 | absolute one. In SVR4 PIC, the first sequence will be for global | |
889 | symbols and the second will be for local symbols. | |
890 | ||
584892a6 RS |
891 | The frag's "subtype" is RELAX_ENCODE (FIRST, SECOND), where FIRST and |
892 | SECOND are the lengths of the two sequences in bytes. These fields | |
893 | can be extracted using RELAX_FIRST() and RELAX_SECOND(). In addition, | |
894 | the subtype has the following flags: | |
4d7206a2 | 895 | |
584892a6 RS |
896 | RELAX_USE_SECOND |
897 | Set if it has been decided that we should use the second | |
898 | sequence instead of the first. | |
899 | ||
900 | RELAX_SECOND_LONGER | |
901 | Set in the first variant frag if the macro's second implementation | |
902 | is longer than its first. This refers to the macro as a whole, | |
903 | not an individual relaxation. | |
904 | ||
905 | RELAX_NOMACRO | |
906 | Set in the first variant frag if the macro appeared in a .set nomacro | |
907 | block and if one alternative requires a warning but the other does not. | |
908 | ||
909 | RELAX_DELAY_SLOT | |
910 | Like RELAX_NOMACRO, but indicates that the macro appears in a branch | |
911 | delay slot. | |
4d7206a2 | 912 | |
df58fc94 RS |
913 | RELAX_DELAY_SLOT_16BIT |
914 | Like RELAX_DELAY_SLOT, but indicates that the delay slot requires a | |
915 | 16-bit instruction. | |
916 | ||
917 | RELAX_DELAY_SLOT_SIZE_FIRST | |
918 | Like RELAX_DELAY_SLOT, but indicates that the first implementation of | |
919 | the macro is of the wrong size for the branch delay slot. | |
920 | ||
921 | RELAX_DELAY_SLOT_SIZE_SECOND | |
922 | Like RELAX_DELAY_SLOT, but indicates that the second implementation of | |
923 | the macro is of the wrong size for the branch delay slot. | |
924 | ||
4d7206a2 RS |
925 | The frag's "opcode" points to the first fixup for relaxable code. |
926 | ||
927 | Relaxable macros are generated using a sequence such as: | |
928 | ||
929 | relax_start (SYMBOL); | |
930 | ... generate first expansion ... | |
931 | relax_switch (); | |
932 | ... generate second expansion ... | |
933 | relax_end (); | |
934 | ||
935 | The code and fixups for the unwanted alternative are discarded | |
936 | by md_convert_frag. */ | |
584892a6 | 937 | #define RELAX_ENCODE(FIRST, SECOND) (((FIRST) << 8) | (SECOND)) |
4d7206a2 | 938 | |
584892a6 RS |
939 | #define RELAX_FIRST(X) (((X) >> 8) & 0xff) |
940 | #define RELAX_SECOND(X) ((X) & 0xff) | |
941 | #define RELAX_USE_SECOND 0x10000 | |
942 | #define RELAX_SECOND_LONGER 0x20000 | |
943 | #define RELAX_NOMACRO 0x40000 | |
944 | #define RELAX_DELAY_SLOT 0x80000 | |
df58fc94 RS |
945 | #define RELAX_DELAY_SLOT_16BIT 0x100000 |
946 | #define RELAX_DELAY_SLOT_SIZE_FIRST 0x200000 | |
947 | #define RELAX_DELAY_SLOT_SIZE_SECOND 0x400000 | |
252b5132 | 948 | |
4a6a3df4 AO |
949 | /* Branch without likely bit. If label is out of range, we turn: |
950 | ||
951 | beq reg1, reg2, label | |
952 | delay slot | |
953 | ||
954 | into | |
955 | ||
956 | bne reg1, reg2, 0f | |
957 | nop | |
958 | j label | |
959 | 0: delay slot | |
960 | ||
961 | with the following opcode replacements: | |
962 | ||
963 | beq <-> bne | |
964 | blez <-> bgtz | |
965 | bltz <-> bgez | |
966 | bc1f <-> bc1t | |
967 | ||
968 | bltzal <-> bgezal (with jal label instead of j label) | |
969 | ||
970 | Even though keeping the delay slot instruction in the delay slot of | |
971 | the branch would be more efficient, it would be very tricky to do | |
972 | correctly, because we'd have to introduce a variable frag *after* | |
973 | the delay slot instruction, and expand that instead. Let's do it | |
974 | the easy way for now, even if the branch-not-taken case now costs | |
975 | one additional instruction. Out-of-range branches are not supposed | |
976 | to be common, anyway. | |
977 | ||
978 | Branch likely. If label is out of range, we turn: | |
979 | ||
980 | beql reg1, reg2, label | |
981 | delay slot (annulled if branch not taken) | |
982 | ||
983 | into | |
984 | ||
985 | beql reg1, reg2, 1f | |
986 | nop | |
987 | beql $0, $0, 2f | |
988 | nop | |
989 | 1: j[al] label | |
990 | delay slot (executed only if branch taken) | |
991 | 2: | |
992 | ||
993 | It would be possible to generate a shorter sequence by losing the | |
994 | likely bit, generating something like: | |
b34976b6 | 995 | |
4a6a3df4 AO |
996 | bne reg1, reg2, 0f |
997 | nop | |
998 | j[al] label | |
999 | delay slot (executed only if branch taken) | |
1000 | 0: | |
1001 | ||
1002 | beql -> bne | |
1003 | bnel -> beq | |
1004 | blezl -> bgtz | |
1005 | bgtzl -> blez | |
1006 | bltzl -> bgez | |
1007 | bgezl -> bltz | |
1008 | bc1fl -> bc1t | |
1009 | bc1tl -> bc1f | |
1010 | ||
1011 | bltzall -> bgezal (with jal label instead of j label) | |
1012 | bgezall -> bltzal (ditto) | |
1013 | ||
1014 | ||
1015 | but it's not clear that it would actually improve performance. */ | |
66b3e8da MR |
1016 | #define RELAX_BRANCH_ENCODE(at, uncond, likely, link, toofar) \ |
1017 | ((relax_substateT) \ | |
1018 | (0xc0000000 \ | |
1019 | | ((at) & 0x1f) \ | |
1020 | | ((toofar) ? 0x20 : 0) \ | |
1021 | | ((link) ? 0x40 : 0) \ | |
1022 | | ((likely) ? 0x80 : 0) \ | |
1023 | | ((uncond) ? 0x100 : 0))) | |
4a6a3df4 | 1024 | #define RELAX_BRANCH_P(i) (((i) & 0xf0000000) == 0xc0000000) |
66b3e8da MR |
1025 | #define RELAX_BRANCH_UNCOND(i) (((i) & 0x100) != 0) |
1026 | #define RELAX_BRANCH_LIKELY(i) (((i) & 0x80) != 0) | |
1027 | #define RELAX_BRANCH_LINK(i) (((i) & 0x40) != 0) | |
1028 | #define RELAX_BRANCH_TOOFAR(i) (((i) & 0x20) != 0) | |
1029 | #define RELAX_BRANCH_AT(i) ((i) & 0x1f) | |
4a6a3df4 | 1030 | |
252b5132 RH |
1031 | /* For mips16 code, we use an entirely different form of relaxation. |
1032 | mips16 supports two versions of most instructions which take | |
1033 | immediate values: a small one which takes some small value, and a | |
1034 | larger one which takes a 16 bit value. Since branches also follow | |
1035 | this pattern, relaxing these values is required. | |
1036 | ||
1037 | We can assemble both mips16 and normal MIPS code in a single | |
1038 | object. Therefore, we need to support this type of relaxation at | |
1039 | the same time that we support the relaxation described above. We | |
1040 | use the high bit of the subtype field to distinguish these cases. | |
1041 | ||
1042 | The information we store for this type of relaxation is the | |
1043 | argument code found in the opcode file for this relocation, whether | |
1044 | the user explicitly requested a small or extended form, and whether | |
1045 | the relocation is in a jump or jal delay slot. That tells us the | |
1046 | size of the value, and how it should be stored. We also store | |
1047 | whether the fragment is considered to be extended or not. We also | |
1048 | store whether this is known to be a branch to a different section, | |
1049 | whether we have tried to relax this frag yet, and whether we have | |
1050 | ever extended a PC relative fragment because of a shift count. */ | |
1051 | #define RELAX_MIPS16_ENCODE(type, small, ext, dslot, jal_dslot) \ | |
1052 | (0x80000000 \ | |
1053 | | ((type) & 0xff) \ | |
1054 | | ((small) ? 0x100 : 0) \ | |
1055 | | ((ext) ? 0x200 : 0) \ | |
1056 | | ((dslot) ? 0x400 : 0) \ | |
1057 | | ((jal_dslot) ? 0x800 : 0)) | |
4a6a3df4 | 1058 | #define RELAX_MIPS16_P(i) (((i) & 0xc0000000) == 0x80000000) |
252b5132 RH |
1059 | #define RELAX_MIPS16_TYPE(i) ((i) & 0xff) |
1060 | #define RELAX_MIPS16_USER_SMALL(i) (((i) & 0x100) != 0) | |
1061 | #define RELAX_MIPS16_USER_EXT(i) (((i) & 0x200) != 0) | |
1062 | #define RELAX_MIPS16_DSLOT(i) (((i) & 0x400) != 0) | |
1063 | #define RELAX_MIPS16_JAL_DSLOT(i) (((i) & 0x800) != 0) | |
1064 | #define RELAX_MIPS16_EXTENDED(i) (((i) & 0x1000) != 0) | |
1065 | #define RELAX_MIPS16_MARK_EXTENDED(i) ((i) | 0x1000) | |
1066 | #define RELAX_MIPS16_CLEAR_EXTENDED(i) ((i) &~ 0x1000) | |
1067 | #define RELAX_MIPS16_LONG_BRANCH(i) (((i) & 0x2000) != 0) | |
1068 | #define RELAX_MIPS16_MARK_LONG_BRANCH(i) ((i) | 0x2000) | |
1069 | #define RELAX_MIPS16_CLEAR_LONG_BRANCH(i) ((i) &~ 0x2000) | |
885add95 | 1070 | |
df58fc94 RS |
1071 | /* For microMIPS code, we use relaxation similar to one we use for |
1072 | MIPS16 code. Some instructions that take immediate values support | |
1073 | two encodings: a small one which takes some small value, and a | |
1074 | larger one which takes a 16 bit value. As some branches also follow | |
1075 | this pattern, relaxing these values is required. | |
1076 | ||
1077 | We can assemble both microMIPS and normal MIPS code in a single | |
1078 | object. Therefore, we need to support this type of relaxation at | |
1079 | the same time that we support the relaxation described above. We | |
1080 | use one of the high bits of the subtype field to distinguish these | |
1081 | cases. | |
1082 | ||
1083 | The information we store for this type of relaxation is the argument | |
1084 | code found in the opcode file for this relocation, the register | |
40209cad MR |
1085 | selected as the assembler temporary, whether the branch is |
1086 | unconditional, whether it is compact, whether it stores the link | |
1087 | address implicitly in $ra, whether relaxation of out-of-range 32-bit | |
1088 | branches to a sequence of instructions is enabled, and whether the | |
1089 | displacement of a branch is too large to fit as an immediate argument | |
1090 | of a 16-bit and a 32-bit branch, respectively. */ | |
1091 | #define RELAX_MICROMIPS_ENCODE(type, at, uncond, compact, link, \ | |
1092 | relax32, toofar16, toofar32) \ | |
1093 | (0x40000000 \ | |
1094 | | ((type) & 0xff) \ | |
1095 | | (((at) & 0x1f) << 8) \ | |
1096 | | ((uncond) ? 0x2000 : 0) \ | |
1097 | | ((compact) ? 0x4000 : 0) \ | |
1098 | | ((link) ? 0x8000 : 0) \ | |
1099 | | ((relax32) ? 0x10000 : 0) \ | |
1100 | | ((toofar16) ? 0x20000 : 0) \ | |
1101 | | ((toofar32) ? 0x40000 : 0)) | |
df58fc94 RS |
1102 | #define RELAX_MICROMIPS_P(i) (((i) & 0xc0000000) == 0x40000000) |
1103 | #define RELAX_MICROMIPS_TYPE(i) ((i) & 0xff) | |
1104 | #define RELAX_MICROMIPS_AT(i) (((i) >> 8) & 0x1f) | |
40209cad MR |
1105 | #define RELAX_MICROMIPS_UNCOND(i) (((i) & 0x2000) != 0) |
1106 | #define RELAX_MICROMIPS_COMPACT(i) (((i) & 0x4000) != 0) | |
1107 | #define RELAX_MICROMIPS_LINK(i) (((i) & 0x8000) != 0) | |
1108 | #define RELAX_MICROMIPS_RELAX32(i) (((i) & 0x10000) != 0) | |
1109 | ||
1110 | #define RELAX_MICROMIPS_TOOFAR16(i) (((i) & 0x20000) != 0) | |
1111 | #define RELAX_MICROMIPS_MARK_TOOFAR16(i) ((i) | 0x20000) | |
1112 | #define RELAX_MICROMIPS_CLEAR_TOOFAR16(i) ((i) & ~0x20000) | |
1113 | #define RELAX_MICROMIPS_TOOFAR32(i) (((i) & 0x40000) != 0) | |
1114 | #define RELAX_MICROMIPS_MARK_TOOFAR32(i) ((i) | 0x40000) | |
1115 | #define RELAX_MICROMIPS_CLEAR_TOOFAR32(i) ((i) & ~0x40000) | |
df58fc94 | 1116 | |
43c0598f RS |
1117 | /* Sign-extend 16-bit value X. */ |
1118 | #define SEXT_16BIT(X) ((((X) + 0x8000) & 0xffff) - 0x8000) | |
1119 | ||
885add95 CD |
1120 | /* Is the given value a sign-extended 32-bit value? */ |
1121 | #define IS_SEXT_32BIT_NUM(x) \ | |
1122 | (((x) &~ (offsetT) 0x7fffffff) == 0 \ | |
1123 | || (((x) &~ (offsetT) 0x7fffffff) == ~ (offsetT) 0x7fffffff)) | |
1124 | ||
1125 | /* Is the given value a sign-extended 16-bit value? */ | |
1126 | #define IS_SEXT_16BIT_NUM(x) \ | |
1127 | (((x) &~ (offsetT) 0x7fff) == 0 \ | |
1128 | || (((x) &~ (offsetT) 0x7fff) == ~ (offsetT) 0x7fff)) | |
1129 | ||
df58fc94 RS |
1130 | /* Is the given value a sign-extended 12-bit value? */ |
1131 | #define IS_SEXT_12BIT_NUM(x) \ | |
1132 | (((((x) & 0xfff) ^ 0x800LL) - 0x800LL) == (x)) | |
1133 | ||
7f3c4072 CM |
1134 | /* Is the given value a sign-extended 9-bit value? */ |
1135 | #define IS_SEXT_9BIT_NUM(x) \ | |
1136 | (((((x) & 0x1ff) ^ 0x100LL) - 0x100LL) == (x)) | |
1137 | ||
2051e8c4 MR |
1138 | /* Is the given value a zero-extended 32-bit value? Or a negated one? */ |
1139 | #define IS_ZEXT_32BIT_NUM(x) \ | |
1140 | (((x) &~ (offsetT) 0xffffffff) == 0 \ | |
1141 | || (((x) &~ (offsetT) 0xffffffff) == ~ (offsetT) 0xffffffff)) | |
1142 | ||
bf12938e RS |
1143 | /* Extract bits MASK << SHIFT from STRUCT and shift them right |
1144 | SHIFT places. */ | |
1145 | #define EXTRACT_BITS(STRUCT, MASK, SHIFT) \ | |
1146 | (((STRUCT) >> (SHIFT)) & (MASK)) | |
1147 | ||
bf12938e | 1148 | /* Extract the operand given by FIELD from mips_cl_insn INSN. */ |
df58fc94 RS |
1149 | #define EXTRACT_OPERAND(MICROMIPS, FIELD, INSN) \ |
1150 | (!(MICROMIPS) \ | |
1151 | ? EXTRACT_BITS ((INSN).insn_opcode, OP_MASK_##FIELD, OP_SH_##FIELD) \ | |
1152 | : EXTRACT_BITS ((INSN).insn_opcode, \ | |
1153 | MICROMIPSOP_MASK_##FIELD, MICROMIPSOP_SH_##FIELD)) | |
bf12938e RS |
1154 | #define MIPS16_EXTRACT_OPERAND(FIELD, INSN) \ |
1155 | EXTRACT_BITS ((INSN).insn_opcode, \ | |
1156 | MIPS16OP_MASK_##FIELD, \ | |
1157 | MIPS16OP_SH_##FIELD) | |
5c04167a RS |
1158 | |
1159 | /* The MIPS16 EXTEND opcode, shifted left 16 places. */ | |
1160 | #define MIPS16_EXTEND (0xf000U << 16) | |
4d7206a2 | 1161 | \f |
df58fc94 RS |
1162 | /* Whether or not we are emitting a branch-likely macro. */ |
1163 | static bfd_boolean emit_branch_likely_macro = FALSE; | |
1164 | ||
4d7206a2 RS |
1165 | /* Global variables used when generating relaxable macros. See the |
1166 | comment above RELAX_ENCODE for more details about how relaxation | |
1167 | is used. */ | |
1168 | static struct { | |
1169 | /* 0 if we're not emitting a relaxable macro. | |
1170 | 1 if we're emitting the first of the two relaxation alternatives. | |
1171 | 2 if we're emitting the second alternative. */ | |
1172 | int sequence; | |
1173 | ||
1174 | /* The first relaxable fixup in the current frag. (In other words, | |
1175 | the first fixup that refers to relaxable code.) */ | |
1176 | fixS *first_fixup; | |
1177 | ||
1178 | /* sizes[0] says how many bytes of the first alternative are stored in | |
1179 | the current frag. Likewise sizes[1] for the second alternative. */ | |
1180 | unsigned int sizes[2]; | |
1181 | ||
1182 | /* The symbol on which the choice of sequence depends. */ | |
1183 | symbolS *symbol; | |
1184 | } mips_relax; | |
252b5132 | 1185 | \f |
584892a6 RS |
1186 | /* Global variables used to decide whether a macro needs a warning. */ |
1187 | static struct { | |
1188 | /* True if the macro is in a branch delay slot. */ | |
1189 | bfd_boolean delay_slot_p; | |
1190 | ||
df58fc94 RS |
1191 | /* Set to the length in bytes required if the macro is in a delay slot |
1192 | that requires a specific length of instruction, otherwise zero. */ | |
1193 | unsigned int delay_slot_length; | |
1194 | ||
584892a6 RS |
1195 | /* For relaxable macros, sizes[0] is the length of the first alternative |
1196 | in bytes and sizes[1] is the length of the second alternative. | |
1197 | For non-relaxable macros, both elements give the length of the | |
1198 | macro in bytes. */ | |
1199 | unsigned int sizes[2]; | |
1200 | ||
df58fc94 RS |
1201 | /* For relaxable macros, first_insn_sizes[0] is the length of the first |
1202 | instruction of the first alternative in bytes and first_insn_sizes[1] | |
1203 | is the length of the first instruction of the second alternative. | |
1204 | For non-relaxable macros, both elements give the length of the first | |
1205 | instruction in bytes. | |
1206 | ||
1207 | Set to zero if we haven't yet seen the first instruction. */ | |
1208 | unsigned int first_insn_sizes[2]; | |
1209 | ||
1210 | /* For relaxable macros, insns[0] is the number of instructions for the | |
1211 | first alternative and insns[1] is the number of instructions for the | |
1212 | second alternative. | |
1213 | ||
1214 | For non-relaxable macros, both elements give the number of | |
1215 | instructions for the macro. */ | |
1216 | unsigned int insns[2]; | |
1217 | ||
584892a6 RS |
1218 | /* The first variant frag for this macro. */ |
1219 | fragS *first_frag; | |
1220 | } mips_macro_warning; | |
1221 | \f | |
252b5132 RH |
1222 | /* Prototypes for static functions. */ |
1223 | ||
252b5132 RH |
1224 | enum mips_regclass { MIPS_GR_REG, MIPS_FP_REG, MIPS16_REG }; |
1225 | ||
b34976b6 | 1226 | static void append_insn |
df58fc94 RS |
1227 | (struct mips_cl_insn *, expressionS *, bfd_reloc_code_real_type *, |
1228 | bfd_boolean expansionp); | |
7d10b47d | 1229 | static void mips_no_prev_insn (void); |
c67a084a | 1230 | static void macro_build (expressionS *, const char *, const char *, ...); |
b34976b6 | 1231 | static void mips16_macro_build |
03ea81db | 1232 | (expressionS *, const char *, const char *, va_list *); |
67c0d1eb | 1233 | static void load_register (int, expressionS *, int); |
584892a6 RS |
1234 | static void macro_start (void); |
1235 | static void macro_end (void); | |
833794fc | 1236 | static void macro (struct mips_cl_insn *ip, char *str); |
17a2f251 | 1237 | static void mips16_macro (struct mips_cl_insn * ip); |
17a2f251 TS |
1238 | static void mips_ip (char *str, struct mips_cl_insn * ip); |
1239 | static void mips16_ip (char *str, struct mips_cl_insn * ip); | |
b34976b6 | 1240 | static void mips16_immed |
43c0598f RS |
1241 | (char *, unsigned int, int, bfd_reloc_code_real_type, offsetT, |
1242 | unsigned int, unsigned long *); | |
5e0116d5 | 1243 | static size_t my_getSmallExpression |
17a2f251 TS |
1244 | (expressionS *, bfd_reloc_code_real_type *, char *); |
1245 | static void my_getExpression (expressionS *, char *); | |
1246 | static void s_align (int); | |
1247 | static void s_change_sec (int); | |
1248 | static void s_change_section (int); | |
1249 | static void s_cons (int); | |
1250 | static void s_float_cons (int); | |
1251 | static void s_mips_globl (int); | |
1252 | static void s_option (int); | |
1253 | static void s_mipsset (int); | |
1254 | static void s_abicalls (int); | |
1255 | static void s_cpload (int); | |
1256 | static void s_cpsetup (int); | |
1257 | static void s_cplocal (int); | |
1258 | static void s_cprestore (int); | |
1259 | static void s_cpreturn (int); | |
741d6ea8 JM |
1260 | static void s_dtprelword (int); |
1261 | static void s_dtpreldword (int); | |
d0f13682 CLT |
1262 | static void s_tprelword (int); |
1263 | static void s_tpreldword (int); | |
17a2f251 TS |
1264 | static void s_gpvalue (int); |
1265 | static void s_gpword (int); | |
1266 | static void s_gpdword (int); | |
a3f278e2 | 1267 | static void s_ehword (int); |
17a2f251 TS |
1268 | static void s_cpadd (int); |
1269 | static void s_insn (int); | |
ba92f887 | 1270 | static void s_nan (int); |
17a2f251 TS |
1271 | static void md_obj_begin (void); |
1272 | static void md_obj_end (void); | |
1273 | static void s_mips_ent (int); | |
1274 | static void s_mips_end (int); | |
1275 | static void s_mips_frame (int); | |
1276 | static void s_mips_mask (int reg_type); | |
1277 | static void s_mips_stab (int); | |
1278 | static void s_mips_weakext (int); | |
1279 | static void s_mips_file (int); | |
1280 | static void s_mips_loc (int); | |
1281 | static bfd_boolean pic_need_relax (symbolS *, asection *); | |
4a6a3df4 | 1282 | static int relaxed_branch_length (fragS *, asection *, int); |
df58fc94 RS |
1283 | static int relaxed_micromips_16bit_branch_length (fragS *, asection *, int); |
1284 | static int relaxed_micromips_32bit_branch_length (fragS *, asection *, int); | |
e7af610e NC |
1285 | |
1286 | /* Table and functions used to map between CPU/ISA names, and | |
1287 | ISA levels, and CPU numbers. */ | |
1288 | ||
e972090a NC |
1289 | struct mips_cpu_info |
1290 | { | |
e7af610e | 1291 | const char *name; /* CPU or ISA name. */ |
d16afab6 RS |
1292 | int flags; /* MIPS_CPU_* flags. */ |
1293 | int ase; /* Set of ASEs implemented by the CPU. */ | |
e7af610e NC |
1294 | int isa; /* ISA level. */ |
1295 | int cpu; /* CPU number (default CPU if ISA). */ | |
1296 | }; | |
1297 | ||
ad3fea08 | 1298 | #define MIPS_CPU_IS_ISA 0x0001 /* Is this an ISA? (If 0, a CPU.) */ |
ad3fea08 | 1299 | |
17a2f251 TS |
1300 | static const struct mips_cpu_info *mips_parse_cpu (const char *, const char *); |
1301 | static const struct mips_cpu_info *mips_cpu_info_from_isa (int); | |
1302 | static const struct mips_cpu_info *mips_cpu_info_from_arch (int); | |
252b5132 | 1303 | \f |
c31f3936 RS |
1304 | /* Command-line options. */ |
1305 | const char *md_shortopts = "O::g::G:"; | |
1306 | ||
1307 | enum options | |
1308 | { | |
1309 | OPTION_MARCH = OPTION_MD_BASE, | |
1310 | OPTION_MTUNE, | |
1311 | OPTION_MIPS1, | |
1312 | OPTION_MIPS2, | |
1313 | OPTION_MIPS3, | |
1314 | OPTION_MIPS4, | |
1315 | OPTION_MIPS5, | |
1316 | OPTION_MIPS32, | |
1317 | OPTION_MIPS64, | |
1318 | OPTION_MIPS32R2, | |
1319 | OPTION_MIPS64R2, | |
1320 | OPTION_MIPS16, | |
1321 | OPTION_NO_MIPS16, | |
1322 | OPTION_MIPS3D, | |
1323 | OPTION_NO_MIPS3D, | |
1324 | OPTION_MDMX, | |
1325 | OPTION_NO_MDMX, | |
1326 | OPTION_DSP, | |
1327 | OPTION_NO_DSP, | |
1328 | OPTION_MT, | |
1329 | OPTION_NO_MT, | |
1330 | OPTION_VIRT, | |
1331 | OPTION_NO_VIRT, | |
1332 | OPTION_SMARTMIPS, | |
1333 | OPTION_NO_SMARTMIPS, | |
1334 | OPTION_DSPR2, | |
1335 | OPTION_NO_DSPR2, | |
1336 | OPTION_EVA, | |
1337 | OPTION_NO_EVA, | |
1338 | OPTION_MICROMIPS, | |
1339 | OPTION_NO_MICROMIPS, | |
1340 | OPTION_MCU, | |
1341 | OPTION_NO_MCU, | |
1342 | OPTION_COMPAT_ARCH_BASE, | |
1343 | OPTION_M4650, | |
1344 | OPTION_NO_M4650, | |
1345 | OPTION_M4010, | |
1346 | OPTION_NO_M4010, | |
1347 | OPTION_M4100, | |
1348 | OPTION_NO_M4100, | |
1349 | OPTION_M3900, | |
1350 | OPTION_NO_M3900, | |
1351 | OPTION_M7000_HILO_FIX, | |
1352 | OPTION_MNO_7000_HILO_FIX, | |
1353 | OPTION_FIX_24K, | |
1354 | OPTION_NO_FIX_24K, | |
1355 | OPTION_FIX_LOONGSON2F_JUMP, | |
1356 | OPTION_NO_FIX_LOONGSON2F_JUMP, | |
1357 | OPTION_FIX_LOONGSON2F_NOP, | |
1358 | OPTION_NO_FIX_LOONGSON2F_NOP, | |
1359 | OPTION_FIX_VR4120, | |
1360 | OPTION_NO_FIX_VR4120, | |
1361 | OPTION_FIX_VR4130, | |
1362 | OPTION_NO_FIX_VR4130, | |
1363 | OPTION_FIX_CN63XXP1, | |
1364 | OPTION_NO_FIX_CN63XXP1, | |
1365 | OPTION_TRAP, | |
1366 | OPTION_BREAK, | |
1367 | OPTION_EB, | |
1368 | OPTION_EL, | |
1369 | OPTION_FP32, | |
1370 | OPTION_GP32, | |
1371 | OPTION_CONSTRUCT_FLOATS, | |
1372 | OPTION_NO_CONSTRUCT_FLOATS, | |
1373 | OPTION_FP64, | |
1374 | OPTION_GP64, | |
1375 | OPTION_RELAX_BRANCH, | |
1376 | OPTION_NO_RELAX_BRANCH, | |
833794fc MR |
1377 | OPTION_INSN32, |
1378 | OPTION_NO_INSN32, | |
c31f3936 RS |
1379 | OPTION_MSHARED, |
1380 | OPTION_MNO_SHARED, | |
1381 | OPTION_MSYM32, | |
1382 | OPTION_MNO_SYM32, | |
1383 | OPTION_SOFT_FLOAT, | |
1384 | OPTION_HARD_FLOAT, | |
1385 | OPTION_SINGLE_FLOAT, | |
1386 | OPTION_DOUBLE_FLOAT, | |
1387 | OPTION_32, | |
c31f3936 RS |
1388 | OPTION_CALL_SHARED, |
1389 | OPTION_CALL_NONPIC, | |
1390 | OPTION_NON_SHARED, | |
1391 | OPTION_XGOT, | |
1392 | OPTION_MABI, | |
1393 | OPTION_N32, | |
1394 | OPTION_64, | |
1395 | OPTION_MDEBUG, | |
1396 | OPTION_NO_MDEBUG, | |
1397 | OPTION_PDR, | |
1398 | OPTION_NO_PDR, | |
1399 | OPTION_MVXWORKS_PIC, | |
ba92f887 | 1400 | OPTION_NAN, |
c31f3936 RS |
1401 | OPTION_END_OF_ENUM |
1402 | }; | |
1403 | ||
1404 | struct option md_longopts[] = | |
1405 | { | |
1406 | /* Options which specify architecture. */ | |
1407 | {"march", required_argument, NULL, OPTION_MARCH}, | |
1408 | {"mtune", required_argument, NULL, OPTION_MTUNE}, | |
1409 | {"mips0", no_argument, NULL, OPTION_MIPS1}, | |
1410 | {"mips1", no_argument, NULL, OPTION_MIPS1}, | |
1411 | {"mips2", no_argument, NULL, OPTION_MIPS2}, | |
1412 | {"mips3", no_argument, NULL, OPTION_MIPS3}, | |
1413 | {"mips4", no_argument, NULL, OPTION_MIPS4}, | |
1414 | {"mips5", no_argument, NULL, OPTION_MIPS5}, | |
1415 | {"mips32", no_argument, NULL, OPTION_MIPS32}, | |
1416 | {"mips64", no_argument, NULL, OPTION_MIPS64}, | |
1417 | {"mips32r2", no_argument, NULL, OPTION_MIPS32R2}, | |
1418 | {"mips64r2", no_argument, NULL, OPTION_MIPS64R2}, | |
1419 | ||
1420 | /* Options which specify Application Specific Extensions (ASEs). */ | |
1421 | {"mips16", no_argument, NULL, OPTION_MIPS16}, | |
1422 | {"no-mips16", no_argument, NULL, OPTION_NO_MIPS16}, | |
1423 | {"mips3d", no_argument, NULL, OPTION_MIPS3D}, | |
1424 | {"no-mips3d", no_argument, NULL, OPTION_NO_MIPS3D}, | |
1425 | {"mdmx", no_argument, NULL, OPTION_MDMX}, | |
1426 | {"no-mdmx", no_argument, NULL, OPTION_NO_MDMX}, | |
1427 | {"mdsp", no_argument, NULL, OPTION_DSP}, | |
1428 | {"mno-dsp", no_argument, NULL, OPTION_NO_DSP}, | |
1429 | {"mmt", no_argument, NULL, OPTION_MT}, | |
1430 | {"mno-mt", no_argument, NULL, OPTION_NO_MT}, | |
1431 | {"msmartmips", no_argument, NULL, OPTION_SMARTMIPS}, | |
1432 | {"mno-smartmips", no_argument, NULL, OPTION_NO_SMARTMIPS}, | |
1433 | {"mdspr2", no_argument, NULL, OPTION_DSPR2}, | |
1434 | {"mno-dspr2", no_argument, NULL, OPTION_NO_DSPR2}, | |
1435 | {"meva", no_argument, NULL, OPTION_EVA}, | |
1436 | {"mno-eva", no_argument, NULL, OPTION_NO_EVA}, | |
1437 | {"mmicromips", no_argument, NULL, OPTION_MICROMIPS}, | |
1438 | {"mno-micromips", no_argument, NULL, OPTION_NO_MICROMIPS}, | |
1439 | {"mmcu", no_argument, NULL, OPTION_MCU}, | |
1440 | {"mno-mcu", no_argument, NULL, OPTION_NO_MCU}, | |
1441 | {"mvirt", no_argument, NULL, OPTION_VIRT}, | |
1442 | {"mno-virt", no_argument, NULL, OPTION_NO_VIRT}, | |
1443 | ||
1444 | /* Old-style architecture options. Don't add more of these. */ | |
1445 | {"m4650", no_argument, NULL, OPTION_M4650}, | |
1446 | {"no-m4650", no_argument, NULL, OPTION_NO_M4650}, | |
1447 | {"m4010", no_argument, NULL, OPTION_M4010}, | |
1448 | {"no-m4010", no_argument, NULL, OPTION_NO_M4010}, | |
1449 | {"m4100", no_argument, NULL, OPTION_M4100}, | |
1450 | {"no-m4100", no_argument, NULL, OPTION_NO_M4100}, | |
1451 | {"m3900", no_argument, NULL, OPTION_M3900}, | |
1452 | {"no-m3900", no_argument, NULL, OPTION_NO_M3900}, | |
1453 | ||
1454 | /* Options which enable bug fixes. */ | |
1455 | {"mfix7000", no_argument, NULL, OPTION_M7000_HILO_FIX}, | |
1456 | {"no-fix-7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX}, | |
1457 | {"mno-fix7000", no_argument, NULL, OPTION_MNO_7000_HILO_FIX}, | |
1458 | {"mfix-loongson2f-jump", no_argument, NULL, OPTION_FIX_LOONGSON2F_JUMP}, | |
1459 | {"mno-fix-loongson2f-jump", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_JUMP}, | |
1460 | {"mfix-loongson2f-nop", no_argument, NULL, OPTION_FIX_LOONGSON2F_NOP}, | |
1461 | {"mno-fix-loongson2f-nop", no_argument, NULL, OPTION_NO_FIX_LOONGSON2F_NOP}, | |
1462 | {"mfix-vr4120", no_argument, NULL, OPTION_FIX_VR4120}, | |
1463 | {"mno-fix-vr4120", no_argument, NULL, OPTION_NO_FIX_VR4120}, | |
1464 | {"mfix-vr4130", no_argument, NULL, OPTION_FIX_VR4130}, | |
1465 | {"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130}, | |
1466 | {"mfix-24k", no_argument, NULL, OPTION_FIX_24K}, | |
1467 | {"mno-fix-24k", no_argument, NULL, OPTION_NO_FIX_24K}, | |
1468 | {"mfix-cn63xxp1", no_argument, NULL, OPTION_FIX_CN63XXP1}, | |
1469 | {"mno-fix-cn63xxp1", no_argument, NULL, OPTION_NO_FIX_CN63XXP1}, | |
1470 | ||
1471 | /* Miscellaneous options. */ | |
1472 | {"trap", no_argument, NULL, OPTION_TRAP}, | |
1473 | {"no-break", no_argument, NULL, OPTION_TRAP}, | |
1474 | {"break", no_argument, NULL, OPTION_BREAK}, | |
1475 | {"no-trap", no_argument, NULL, OPTION_BREAK}, | |
1476 | {"EB", no_argument, NULL, OPTION_EB}, | |
1477 | {"EL", no_argument, NULL, OPTION_EL}, | |
1478 | {"mfp32", no_argument, NULL, OPTION_FP32}, | |
1479 | {"mgp32", no_argument, NULL, OPTION_GP32}, | |
1480 | {"construct-floats", no_argument, NULL, OPTION_CONSTRUCT_FLOATS}, | |
1481 | {"no-construct-floats", no_argument, NULL, OPTION_NO_CONSTRUCT_FLOATS}, | |
1482 | {"mfp64", no_argument, NULL, OPTION_FP64}, | |
1483 | {"mgp64", no_argument, NULL, OPTION_GP64}, | |
1484 | {"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH}, | |
1485 | {"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH}, | |
833794fc MR |
1486 | {"minsn32", no_argument, NULL, OPTION_INSN32}, |
1487 | {"mno-insn32", no_argument, NULL, OPTION_NO_INSN32}, | |
c31f3936 RS |
1488 | {"mshared", no_argument, NULL, OPTION_MSHARED}, |
1489 | {"mno-shared", no_argument, NULL, OPTION_MNO_SHARED}, | |
1490 | {"msym32", no_argument, NULL, OPTION_MSYM32}, | |
1491 | {"mno-sym32", no_argument, NULL, OPTION_MNO_SYM32}, | |
1492 | {"msoft-float", no_argument, NULL, OPTION_SOFT_FLOAT}, | |
1493 | {"mhard-float", no_argument, NULL, OPTION_HARD_FLOAT}, | |
1494 | {"msingle-float", no_argument, NULL, OPTION_SINGLE_FLOAT}, | |
1495 | {"mdouble-float", no_argument, NULL, OPTION_DOUBLE_FLOAT}, | |
1496 | ||
1497 | /* Strictly speaking this next option is ELF specific, | |
1498 | but we allow it for other ports as well in order to | |
1499 | make testing easier. */ | |
1500 | {"32", no_argument, NULL, OPTION_32}, | |
1501 | ||
1502 | /* ELF-specific options. */ | |
c31f3936 RS |
1503 | {"KPIC", no_argument, NULL, OPTION_CALL_SHARED}, |
1504 | {"call_shared", no_argument, NULL, OPTION_CALL_SHARED}, | |
1505 | {"call_nonpic", no_argument, NULL, OPTION_CALL_NONPIC}, | |
1506 | {"non_shared", no_argument, NULL, OPTION_NON_SHARED}, | |
1507 | {"xgot", no_argument, NULL, OPTION_XGOT}, | |
1508 | {"mabi", required_argument, NULL, OPTION_MABI}, | |
1509 | {"n32", no_argument, NULL, OPTION_N32}, | |
1510 | {"64", no_argument, NULL, OPTION_64}, | |
1511 | {"mdebug", no_argument, NULL, OPTION_MDEBUG}, | |
1512 | {"no-mdebug", no_argument, NULL, OPTION_NO_MDEBUG}, | |
1513 | {"mpdr", no_argument, NULL, OPTION_PDR}, | |
1514 | {"mno-pdr", no_argument, NULL, OPTION_NO_PDR}, | |
1515 | {"mvxworks-pic", no_argument, NULL, OPTION_MVXWORKS_PIC}, | |
ba92f887 | 1516 | {"mnan", required_argument, NULL, OPTION_NAN}, |
c31f3936 RS |
1517 | |
1518 | {NULL, no_argument, NULL, 0} | |
1519 | }; | |
1520 | size_t md_longopts_size = sizeof (md_longopts); | |
1521 | \f | |
c6278170 RS |
1522 | /* Information about either an Application Specific Extension or an |
1523 | optional architecture feature that, for simplicity, we treat in the | |
1524 | same way as an ASE. */ | |
1525 | struct mips_ase | |
1526 | { | |
1527 | /* The name of the ASE, used in both the command-line and .set options. */ | |
1528 | const char *name; | |
1529 | ||
1530 | /* The associated ASE_* flags. If the ASE is available on both 32-bit | |
1531 | and 64-bit architectures, the flags here refer to the subset that | |
1532 | is available on both. */ | |
1533 | unsigned int flags; | |
1534 | ||
1535 | /* The ASE_* flag used for instructions that are available on 64-bit | |
1536 | architectures but that are not included in FLAGS. */ | |
1537 | unsigned int flags64; | |
1538 | ||
1539 | /* The command-line options that turn the ASE on and off. */ | |
1540 | int option_on; | |
1541 | int option_off; | |
1542 | ||
1543 | /* The minimum required architecture revisions for MIPS32, MIPS64, | |
1544 | microMIPS32 and microMIPS64, or -1 if the extension isn't supported. */ | |
1545 | int mips32_rev; | |
1546 | int mips64_rev; | |
1547 | int micromips32_rev; | |
1548 | int micromips64_rev; | |
1549 | }; | |
1550 | ||
1551 | /* A table of all supported ASEs. */ | |
1552 | static const struct mips_ase mips_ases[] = { | |
1553 | { "dsp", ASE_DSP, ASE_DSP64, | |
1554 | OPTION_DSP, OPTION_NO_DSP, | |
1555 | 2, 2, 2, 2 }, | |
1556 | ||
1557 | { "dspr2", ASE_DSP | ASE_DSPR2, 0, | |
1558 | OPTION_DSPR2, OPTION_NO_DSPR2, | |
1559 | 2, 2, 2, 2 }, | |
1560 | ||
1561 | { "eva", ASE_EVA, 0, | |
1562 | OPTION_EVA, OPTION_NO_EVA, | |
1563 | 2, 2, 2, 2 }, | |
1564 | ||
1565 | { "mcu", ASE_MCU, 0, | |
1566 | OPTION_MCU, OPTION_NO_MCU, | |
1567 | 2, 2, 2, 2 }, | |
1568 | ||
1569 | /* Deprecated in MIPS64r5, but we don't implement that yet. */ | |
1570 | { "mdmx", ASE_MDMX, 0, | |
1571 | OPTION_MDMX, OPTION_NO_MDMX, | |
1572 | -1, 1, -1, -1 }, | |
1573 | ||
1574 | /* Requires 64-bit FPRs, so the minimum MIPS32 revision is 2. */ | |
1575 | { "mips3d", ASE_MIPS3D, 0, | |
1576 | OPTION_MIPS3D, OPTION_NO_MIPS3D, | |
1577 | 2, 1, -1, -1 }, | |
1578 | ||
1579 | { "mt", ASE_MT, 0, | |
1580 | OPTION_MT, OPTION_NO_MT, | |
1581 | 2, 2, -1, -1 }, | |
1582 | ||
1583 | { "smartmips", ASE_SMARTMIPS, 0, | |
1584 | OPTION_SMARTMIPS, OPTION_NO_SMARTMIPS, | |
1585 | 1, -1, -1, -1 }, | |
1586 | ||
1587 | { "virt", ASE_VIRT, ASE_VIRT64, | |
1588 | OPTION_VIRT, OPTION_NO_VIRT, | |
1589 | 2, 2, 2, 2 } | |
1590 | }; | |
1591 | ||
1592 | /* The set of ASEs that require -mfp64. */ | |
1593 | #define FP64_ASES (ASE_MIPS3D | ASE_MDMX) | |
1594 | ||
1595 | /* Groups of ASE_* flags that represent different revisions of an ASE. */ | |
1596 | static const unsigned int mips_ase_groups[] = { | |
1597 | ASE_DSP | ASE_DSPR2 | |
1598 | }; | |
1599 | \f | |
252b5132 RH |
1600 | /* Pseudo-op table. |
1601 | ||
1602 | The following pseudo-ops from the Kane and Heinrich MIPS book | |
1603 | should be defined here, but are currently unsupported: .alias, | |
1604 | .galive, .gjaldef, .gjrlive, .livereg, .noalias. | |
1605 | ||
1606 | The following pseudo-ops from the Kane and Heinrich MIPS book are | |
1607 | specific to the type of debugging information being generated, and | |
1608 | should be defined by the object format: .aent, .begin, .bend, | |
1609 | .bgnb, .end, .endb, .ent, .fmask, .frame, .loc, .mask, .verstamp, | |
1610 | .vreg. | |
1611 | ||
1612 | The following pseudo-ops from the Kane and Heinrich MIPS book are | |
1613 | not MIPS CPU specific, but are also not specific to the object file | |
1614 | format. This file is probably the best place to define them, but | |
d84bcf09 | 1615 | they are not currently supported: .asm0, .endr, .lab, .struct. */ |
252b5132 | 1616 | |
e972090a NC |
1617 | static const pseudo_typeS mips_pseudo_table[] = |
1618 | { | |
beae10d5 | 1619 | /* MIPS specific pseudo-ops. */ |
252b5132 RH |
1620 | {"option", s_option, 0}, |
1621 | {"set", s_mipsset, 0}, | |
1622 | {"rdata", s_change_sec, 'r'}, | |
1623 | {"sdata", s_change_sec, 's'}, | |
1624 | {"livereg", s_ignore, 0}, | |
1625 | {"abicalls", s_abicalls, 0}, | |
1626 | {"cpload", s_cpload, 0}, | |
6478892d TS |
1627 | {"cpsetup", s_cpsetup, 0}, |
1628 | {"cplocal", s_cplocal, 0}, | |
252b5132 | 1629 | {"cprestore", s_cprestore, 0}, |
6478892d | 1630 | {"cpreturn", s_cpreturn, 0}, |
741d6ea8 JM |
1631 | {"dtprelword", s_dtprelword, 0}, |
1632 | {"dtpreldword", s_dtpreldword, 0}, | |
d0f13682 CLT |
1633 | {"tprelword", s_tprelword, 0}, |
1634 | {"tpreldword", s_tpreldword, 0}, | |
6478892d | 1635 | {"gpvalue", s_gpvalue, 0}, |
252b5132 | 1636 | {"gpword", s_gpword, 0}, |
10181a0d | 1637 | {"gpdword", s_gpdword, 0}, |
a3f278e2 | 1638 | {"ehword", s_ehword, 0}, |
252b5132 RH |
1639 | {"cpadd", s_cpadd, 0}, |
1640 | {"insn", s_insn, 0}, | |
ba92f887 | 1641 | {"nan", s_nan, 0}, |
252b5132 | 1642 | |
beae10d5 | 1643 | /* Relatively generic pseudo-ops that happen to be used on MIPS |
252b5132 | 1644 | chips. */ |
38a57ae7 | 1645 | {"asciiz", stringer, 8 + 1}, |
252b5132 RH |
1646 | {"bss", s_change_sec, 'b'}, |
1647 | {"err", s_err, 0}, | |
1648 | {"half", s_cons, 1}, | |
1649 | {"dword", s_cons, 3}, | |
1650 | {"weakext", s_mips_weakext, 0}, | |
7c752c2a TS |
1651 | {"origin", s_org, 0}, |
1652 | {"repeat", s_rept, 0}, | |
252b5132 | 1653 | |
998b3c36 MR |
1654 | /* For MIPS this is non-standard, but we define it for consistency. */ |
1655 | {"sbss", s_change_sec, 'B'}, | |
1656 | ||
beae10d5 | 1657 | /* These pseudo-ops are defined in read.c, but must be overridden |
252b5132 RH |
1658 | here for one reason or another. */ |
1659 | {"align", s_align, 0}, | |
1660 | {"byte", s_cons, 0}, | |
1661 | {"data", s_change_sec, 'd'}, | |
1662 | {"double", s_float_cons, 'd'}, | |
1663 | {"float", s_float_cons, 'f'}, | |
1664 | {"globl", s_mips_globl, 0}, | |
1665 | {"global", s_mips_globl, 0}, | |
1666 | {"hword", s_cons, 1}, | |
1667 | {"int", s_cons, 2}, | |
1668 | {"long", s_cons, 2}, | |
1669 | {"octa", s_cons, 4}, | |
1670 | {"quad", s_cons, 3}, | |
cca86cc8 | 1671 | {"section", s_change_section, 0}, |
252b5132 RH |
1672 | {"short", s_cons, 1}, |
1673 | {"single", s_float_cons, 'f'}, | |
754e2bb9 | 1674 | {"stabd", s_mips_stab, 'd'}, |
252b5132 | 1675 | {"stabn", s_mips_stab, 'n'}, |
754e2bb9 | 1676 | {"stabs", s_mips_stab, 's'}, |
252b5132 RH |
1677 | {"text", s_change_sec, 't'}, |
1678 | {"word", s_cons, 2}, | |
add56521 | 1679 | |
add56521 | 1680 | { "extern", ecoff_directive_extern, 0}, |
add56521 | 1681 | |
43841e91 | 1682 | { NULL, NULL, 0 }, |
252b5132 RH |
1683 | }; |
1684 | ||
e972090a NC |
1685 | static const pseudo_typeS mips_nonecoff_pseudo_table[] = |
1686 | { | |
beae10d5 KH |
1687 | /* These pseudo-ops should be defined by the object file format. |
1688 | However, a.out doesn't support them, so we have versions here. */ | |
252b5132 RH |
1689 | {"aent", s_mips_ent, 1}, |
1690 | {"bgnb", s_ignore, 0}, | |
1691 | {"end", s_mips_end, 0}, | |
1692 | {"endb", s_ignore, 0}, | |
1693 | {"ent", s_mips_ent, 0}, | |
c5dd6aab | 1694 | {"file", s_mips_file, 0}, |
252b5132 RH |
1695 | {"fmask", s_mips_mask, 'F'}, |
1696 | {"frame", s_mips_frame, 0}, | |
c5dd6aab | 1697 | {"loc", s_mips_loc, 0}, |
252b5132 RH |
1698 | {"mask", s_mips_mask, 'R'}, |
1699 | {"verstamp", s_ignore, 0}, | |
43841e91 | 1700 | { NULL, NULL, 0 }, |
252b5132 RH |
1701 | }; |
1702 | ||
3ae8dd8d MR |
1703 | /* Export the ABI address size for use by TC_ADDRESS_BYTES for the |
1704 | purpose of the `.dc.a' internal pseudo-op. */ | |
1705 | ||
1706 | int | |
1707 | mips_address_bytes (void) | |
1708 | { | |
1709 | return HAVE_64BIT_ADDRESSES ? 8 : 4; | |
1710 | } | |
1711 | ||
17a2f251 | 1712 | extern void pop_insert (const pseudo_typeS *); |
252b5132 RH |
1713 | |
1714 | void | |
17a2f251 | 1715 | mips_pop_insert (void) |
252b5132 RH |
1716 | { |
1717 | pop_insert (mips_pseudo_table); | |
1718 | if (! ECOFF_DEBUGGING) | |
1719 | pop_insert (mips_nonecoff_pseudo_table); | |
1720 | } | |
1721 | \f | |
1722 | /* Symbols labelling the current insn. */ | |
1723 | ||
e972090a NC |
1724 | struct insn_label_list |
1725 | { | |
252b5132 RH |
1726 | struct insn_label_list *next; |
1727 | symbolS *label; | |
1728 | }; | |
1729 | ||
252b5132 | 1730 | static struct insn_label_list *free_insn_labels; |
742a56fe | 1731 | #define label_list tc_segment_info_data.labels |
252b5132 | 1732 | |
17a2f251 | 1733 | static void mips_clear_insn_labels (void); |
df58fc94 RS |
1734 | static void mips_mark_labels (void); |
1735 | static void mips_compressed_mark_labels (void); | |
252b5132 RH |
1736 | |
1737 | static inline void | |
17a2f251 | 1738 | mips_clear_insn_labels (void) |
252b5132 RH |
1739 | { |
1740 | register struct insn_label_list **pl; | |
a8dbcb85 | 1741 | segment_info_type *si; |
252b5132 | 1742 | |
a8dbcb85 TS |
1743 | if (now_seg) |
1744 | { | |
1745 | for (pl = &free_insn_labels; *pl != NULL; pl = &(*pl)->next) | |
1746 | ; | |
1747 | ||
1748 | si = seg_info (now_seg); | |
1749 | *pl = si->label_list; | |
1750 | si->label_list = NULL; | |
1751 | } | |
252b5132 | 1752 | } |
a8dbcb85 | 1753 | |
df58fc94 RS |
1754 | /* Mark instruction labels in MIPS16/microMIPS mode. */ |
1755 | ||
1756 | static inline void | |
1757 | mips_mark_labels (void) | |
1758 | { | |
1759 | if (HAVE_CODE_COMPRESSION) | |
1760 | mips_compressed_mark_labels (); | |
1761 | } | |
252b5132 RH |
1762 | \f |
1763 | static char *expr_end; | |
1764 | ||
e423441d | 1765 | /* An expression in a macro instruction. This is set by mips_ip and |
b0e6f033 | 1766 | mips16_ip and when populated is always an O_constant. */ |
252b5132 RH |
1767 | |
1768 | static expressionS imm_expr; | |
252b5132 | 1769 | |
77bd4346 RS |
1770 | /* The relocatable field in an instruction and the relocs associated |
1771 | with it. These variables are used for instructions like LUI and | |
1772 | JAL as well as true offsets. They are also used for address | |
1773 | operands in macros. */ | |
252b5132 | 1774 | |
77bd4346 | 1775 | static expressionS offset_expr; |
f6688943 TS |
1776 | static bfd_reloc_code_real_type offset_reloc[3] |
1777 | = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED}; | |
252b5132 | 1778 | |
df58fc94 RS |
1779 | /* This is set to the resulting size of the instruction to be produced |
1780 | by mips16_ip if an explicit extension is used or by mips_ip if an | |
1781 | explicit size is supplied. */ | |
252b5132 | 1782 | |
df58fc94 | 1783 | static unsigned int forced_insn_length; |
252b5132 | 1784 | |
e1b47bd5 RS |
1785 | /* True if we are assembling an instruction. All dot symbols defined during |
1786 | this time should be treated as code labels. */ | |
1787 | ||
1788 | static bfd_boolean mips_assembling_insn; | |
1789 | ||
ecb4347a DJ |
1790 | /* The pdr segment for per procedure frame/regmask info. Not used for |
1791 | ECOFF debugging. */ | |
252b5132 RH |
1792 | |
1793 | static segT pdr_seg; | |
252b5132 | 1794 | |
e013f690 TS |
1795 | /* The default target format to use. */ |
1796 | ||
aeffff67 RS |
1797 | #if defined (TE_FreeBSD) |
1798 | #define ELF_TARGET(PREFIX, ENDIAN) PREFIX "trad" ENDIAN "mips-freebsd" | |
1799 | #elif defined (TE_TMIPS) | |
1800 | #define ELF_TARGET(PREFIX, ENDIAN) PREFIX "trad" ENDIAN "mips" | |
1801 | #else | |
1802 | #define ELF_TARGET(PREFIX, ENDIAN) PREFIX ENDIAN "mips" | |
1803 | #endif | |
1804 | ||
e013f690 | 1805 | const char * |
17a2f251 | 1806 | mips_target_format (void) |
e013f690 TS |
1807 | { |
1808 | switch (OUTPUT_FLAVOR) | |
1809 | { | |
e013f690 | 1810 | case bfd_target_elf_flavour: |
0a44bf69 RS |
1811 | #ifdef TE_VXWORKS |
1812 | if (!HAVE_64BIT_OBJECTS && !HAVE_NEWABI) | |
1813 | return (target_big_endian | |
1814 | ? "elf32-bigmips-vxworks" | |
1815 | : "elf32-littlemips-vxworks"); | |
1816 | #endif | |
e013f690 | 1817 | return (target_big_endian |
cfe86eaa | 1818 | ? (HAVE_64BIT_OBJECTS |
aeffff67 | 1819 | ? ELF_TARGET ("elf64-", "big") |
cfe86eaa | 1820 | : (HAVE_NEWABI |
aeffff67 RS |
1821 | ? ELF_TARGET ("elf32-n", "big") |
1822 | : ELF_TARGET ("elf32-", "big"))) | |
cfe86eaa | 1823 | : (HAVE_64BIT_OBJECTS |
aeffff67 | 1824 | ? ELF_TARGET ("elf64-", "little") |
cfe86eaa | 1825 | : (HAVE_NEWABI |
aeffff67 RS |
1826 | ? ELF_TARGET ("elf32-n", "little") |
1827 | : ELF_TARGET ("elf32-", "little")))); | |
e013f690 TS |
1828 | default: |
1829 | abort (); | |
1830 | return NULL; | |
1831 | } | |
1832 | } | |
1833 | ||
c6278170 RS |
1834 | /* Return the ISA revision that is currently in use, or 0 if we are |
1835 | generating code for MIPS V or below. */ | |
1836 | ||
1837 | static int | |
1838 | mips_isa_rev (void) | |
1839 | { | |
1840 | if (mips_opts.isa == ISA_MIPS32R2 || mips_opts.isa == ISA_MIPS64R2) | |
1841 | return 2; | |
1842 | ||
1843 | /* microMIPS implies revision 2 or above. */ | |
1844 | if (mips_opts.micromips) | |
1845 | return 2; | |
1846 | ||
1847 | if (mips_opts.isa == ISA_MIPS32 || mips_opts.isa == ISA_MIPS64) | |
1848 | return 1; | |
1849 | ||
1850 | return 0; | |
1851 | } | |
1852 | ||
1853 | /* Return the mask of all ASEs that are revisions of those in FLAGS. */ | |
1854 | ||
1855 | static unsigned int | |
1856 | mips_ase_mask (unsigned int flags) | |
1857 | { | |
1858 | unsigned int i; | |
1859 | ||
1860 | for (i = 0; i < ARRAY_SIZE (mips_ase_groups); i++) | |
1861 | if (flags & mips_ase_groups[i]) | |
1862 | flags |= mips_ase_groups[i]; | |
1863 | return flags; | |
1864 | } | |
1865 | ||
1866 | /* Check whether the current ISA supports ASE. Issue a warning if | |
1867 | appropriate. */ | |
1868 | ||
1869 | static void | |
1870 | mips_check_isa_supports_ase (const struct mips_ase *ase) | |
1871 | { | |
1872 | const char *base; | |
1873 | int min_rev, size; | |
1874 | static unsigned int warned_isa; | |
1875 | static unsigned int warned_fp32; | |
1876 | ||
1877 | if (ISA_HAS_64BIT_REGS (mips_opts.isa)) | |
1878 | min_rev = mips_opts.micromips ? ase->micromips64_rev : ase->mips64_rev; | |
1879 | else | |
1880 | min_rev = mips_opts.micromips ? ase->micromips32_rev : ase->mips32_rev; | |
1881 | if ((min_rev < 0 || mips_isa_rev () < min_rev) | |
1882 | && (warned_isa & ase->flags) != ase->flags) | |
1883 | { | |
1884 | warned_isa |= ase->flags; | |
1885 | base = mips_opts.micromips ? "microMIPS" : "MIPS"; | |
1886 | size = ISA_HAS_64BIT_REGS (mips_opts.isa) ? 64 : 32; | |
1887 | if (min_rev < 0) | |
1661c76c | 1888 | as_warn (_("the %d-bit %s architecture does not support the" |
c6278170 RS |
1889 | " `%s' extension"), size, base, ase->name); |
1890 | else | |
1661c76c | 1891 | as_warn (_("the `%s' extension requires %s%d revision %d or greater"), |
c6278170 RS |
1892 | ase->name, base, size, min_rev); |
1893 | } | |
1894 | if ((ase->flags & FP64_ASES) | |
1895 | && mips_opts.fp32 | |
1896 | && (warned_fp32 & ase->flags) != ase->flags) | |
1897 | { | |
1898 | warned_fp32 |= ase->flags; | |
1661c76c | 1899 | as_warn (_("the `%s' extension requires 64-bit FPRs"), ase->name); |
c6278170 RS |
1900 | } |
1901 | } | |
1902 | ||
1903 | /* Check all enabled ASEs to see whether they are supported by the | |
1904 | chosen architecture. */ | |
1905 | ||
1906 | static void | |
1907 | mips_check_isa_supports_ases (void) | |
1908 | { | |
1909 | unsigned int i, mask; | |
1910 | ||
1911 | for (i = 0; i < ARRAY_SIZE (mips_ases); i++) | |
1912 | { | |
1913 | mask = mips_ase_mask (mips_ases[i].flags); | |
1914 | if ((mips_opts.ase & mask) == mips_ases[i].flags) | |
1915 | mips_check_isa_supports_ase (&mips_ases[i]); | |
1916 | } | |
1917 | } | |
1918 | ||
1919 | /* Set the state of ASE to ENABLED_P. Return the mask of ASE_* flags | |
1920 | that were affected. */ | |
1921 | ||
1922 | static unsigned int | |
1923 | mips_set_ase (const struct mips_ase *ase, bfd_boolean enabled_p) | |
1924 | { | |
1925 | unsigned int mask; | |
1926 | ||
1927 | mask = mips_ase_mask (ase->flags); | |
1928 | mips_opts.ase &= ~mask; | |
1929 | if (enabled_p) | |
1930 | mips_opts.ase |= ase->flags; | |
1931 | return mask; | |
1932 | } | |
1933 | ||
1934 | /* Return the ASE called NAME, or null if none. */ | |
1935 | ||
1936 | static const struct mips_ase * | |
1937 | mips_lookup_ase (const char *name) | |
1938 | { | |
1939 | unsigned int i; | |
1940 | ||
1941 | for (i = 0; i < ARRAY_SIZE (mips_ases); i++) | |
1942 | if (strcmp (name, mips_ases[i].name) == 0) | |
1943 | return &mips_ases[i]; | |
1944 | return NULL; | |
1945 | } | |
1946 | ||
df58fc94 RS |
1947 | /* Return the length of a microMIPS instruction in bytes. If bits of |
1948 | the mask beyond the low 16 are 0, then it is a 16-bit instruction. | |
1949 | Otherwise assume a 32-bit instruction; 48-bit instructions (0x1f | |
1950 | major opcode) will require further modifications to the opcode | |
1951 | table. */ | |
1952 | ||
1953 | static inline unsigned int | |
1954 | micromips_insn_length (const struct mips_opcode *mo) | |
1955 | { | |
1956 | return (mo->mask >> 16) == 0 ? 2 : 4; | |
1957 | } | |
1958 | ||
5c04167a RS |
1959 | /* Return the length of MIPS16 instruction OPCODE. */ |
1960 | ||
1961 | static inline unsigned int | |
1962 | mips16_opcode_length (unsigned long opcode) | |
1963 | { | |
1964 | return (opcode >> 16) == 0 ? 2 : 4; | |
1965 | } | |
1966 | ||
1e915849 RS |
1967 | /* Return the length of instruction INSN. */ |
1968 | ||
1969 | static inline unsigned int | |
1970 | insn_length (const struct mips_cl_insn *insn) | |
1971 | { | |
df58fc94 RS |
1972 | if (mips_opts.micromips) |
1973 | return micromips_insn_length (insn->insn_mo); | |
1974 | else if (mips_opts.mips16) | |
5c04167a | 1975 | return mips16_opcode_length (insn->insn_opcode); |
df58fc94 | 1976 | else |
1e915849 | 1977 | return 4; |
1e915849 RS |
1978 | } |
1979 | ||
1980 | /* Initialise INSN from opcode entry MO. Leave its position unspecified. */ | |
1981 | ||
1982 | static void | |
1983 | create_insn (struct mips_cl_insn *insn, const struct mips_opcode *mo) | |
1984 | { | |
1985 | size_t i; | |
1986 | ||
1987 | insn->insn_mo = mo; | |
1e915849 RS |
1988 | insn->insn_opcode = mo->match; |
1989 | insn->frag = NULL; | |
1990 | insn->where = 0; | |
1991 | for (i = 0; i < ARRAY_SIZE (insn->fixp); i++) | |
1992 | insn->fixp[i] = NULL; | |
1993 | insn->fixed_p = (mips_opts.noreorder > 0); | |
1994 | insn->noreorder_p = (mips_opts.noreorder > 0); | |
1995 | insn->mips16_absolute_jump_p = 0; | |
15be625d | 1996 | insn->complete_p = 0; |
e407c74b | 1997 | insn->cleared_p = 0; |
1e915849 RS |
1998 | } |
1999 | ||
fc76e730 RS |
2000 | /* Get a list of all the operands in INSN. */ |
2001 | ||
2002 | static const struct mips_operand_array * | |
2003 | insn_operands (const struct mips_cl_insn *insn) | |
2004 | { | |
2005 | if (insn->insn_mo >= &mips_opcodes[0] | |
2006 | && insn->insn_mo < &mips_opcodes[NUMOPCODES]) | |
2007 | return &mips_operands[insn->insn_mo - &mips_opcodes[0]]; | |
2008 | ||
2009 | if (insn->insn_mo >= &mips16_opcodes[0] | |
2010 | && insn->insn_mo < &mips16_opcodes[bfd_mips16_num_opcodes]) | |
2011 | return &mips16_operands[insn->insn_mo - &mips16_opcodes[0]]; | |
2012 | ||
2013 | if (insn->insn_mo >= µmips_opcodes[0] | |
2014 | && insn->insn_mo < µmips_opcodes[bfd_micromips_num_opcodes]) | |
2015 | return µmips_operands[insn->insn_mo - µmips_opcodes[0]]; | |
2016 | ||
2017 | abort (); | |
2018 | } | |
2019 | ||
2020 | /* Get a description of operand OPNO of INSN. */ | |
2021 | ||
2022 | static const struct mips_operand * | |
2023 | insn_opno (const struct mips_cl_insn *insn, unsigned opno) | |
2024 | { | |
2025 | const struct mips_operand_array *operands; | |
2026 | ||
2027 | operands = insn_operands (insn); | |
2028 | if (opno >= MAX_OPERANDS || !operands->operand[opno]) | |
2029 | abort (); | |
2030 | return operands->operand[opno]; | |
2031 | } | |
2032 | ||
e077a1c8 RS |
2033 | /* Install UVAL as the value of OPERAND in INSN. */ |
2034 | ||
2035 | static inline void | |
2036 | insn_insert_operand (struct mips_cl_insn *insn, | |
2037 | const struct mips_operand *operand, unsigned int uval) | |
2038 | { | |
2039 | insn->insn_opcode = mips_insert_operand (operand, insn->insn_opcode, uval); | |
2040 | } | |
2041 | ||
fc76e730 RS |
2042 | /* Extract the value of OPERAND from INSN. */ |
2043 | ||
2044 | static inline unsigned | |
2045 | insn_extract_operand (const struct mips_cl_insn *insn, | |
2046 | const struct mips_operand *operand) | |
2047 | { | |
2048 | return mips_extract_operand (operand, insn->insn_opcode); | |
2049 | } | |
2050 | ||
df58fc94 | 2051 | /* Record the current MIPS16/microMIPS mode in now_seg. */ |
742a56fe RS |
2052 | |
2053 | static void | |
df58fc94 | 2054 | mips_record_compressed_mode (void) |
742a56fe RS |
2055 | { |
2056 | segment_info_type *si; | |
2057 | ||
2058 | si = seg_info (now_seg); | |
2059 | if (si->tc_segment_info_data.mips16 != mips_opts.mips16) | |
2060 | si->tc_segment_info_data.mips16 = mips_opts.mips16; | |
df58fc94 RS |
2061 | if (si->tc_segment_info_data.micromips != mips_opts.micromips) |
2062 | si->tc_segment_info_data.micromips = mips_opts.micromips; | |
742a56fe RS |
2063 | } |
2064 | ||
4d68580a RS |
2065 | /* Read a standard MIPS instruction from BUF. */ |
2066 | ||
2067 | static unsigned long | |
2068 | read_insn (char *buf) | |
2069 | { | |
2070 | if (target_big_endian) | |
2071 | return bfd_getb32 ((bfd_byte *) buf); | |
2072 | else | |
2073 | return bfd_getl32 ((bfd_byte *) buf); | |
2074 | } | |
2075 | ||
2076 | /* Write standard MIPS instruction INSN to BUF. Return a pointer to | |
2077 | the next byte. */ | |
2078 | ||
2079 | static char * | |
2080 | write_insn (char *buf, unsigned int insn) | |
2081 | { | |
2082 | md_number_to_chars (buf, insn, 4); | |
2083 | return buf + 4; | |
2084 | } | |
2085 | ||
2086 | /* Read a microMIPS or MIPS16 opcode from BUF, given that it | |
2087 | has length LENGTH. */ | |
2088 | ||
2089 | static unsigned long | |
2090 | read_compressed_insn (char *buf, unsigned int length) | |
2091 | { | |
2092 | unsigned long insn; | |
2093 | unsigned int i; | |
2094 | ||
2095 | insn = 0; | |
2096 | for (i = 0; i < length; i += 2) | |
2097 | { | |
2098 | insn <<= 16; | |
2099 | if (target_big_endian) | |
2100 | insn |= bfd_getb16 ((char *) buf); | |
2101 | else | |
2102 | insn |= bfd_getl16 ((char *) buf); | |
2103 | buf += 2; | |
2104 | } | |
2105 | return insn; | |
2106 | } | |
2107 | ||
5c04167a RS |
2108 | /* Write microMIPS or MIPS16 instruction INSN to BUF, given that the |
2109 | instruction is LENGTH bytes long. Return a pointer to the next byte. */ | |
2110 | ||
2111 | static char * | |
2112 | write_compressed_insn (char *buf, unsigned int insn, unsigned int length) | |
2113 | { | |
2114 | unsigned int i; | |
2115 | ||
2116 | for (i = 0; i < length; i += 2) | |
2117 | md_number_to_chars (buf + i, insn >> ((length - i - 2) * 8), 2); | |
2118 | return buf + length; | |
2119 | } | |
2120 | ||
1e915849 RS |
2121 | /* Install INSN at the location specified by its "frag" and "where" fields. */ |
2122 | ||
2123 | static void | |
2124 | install_insn (const struct mips_cl_insn *insn) | |
2125 | { | |
2126 | char *f = insn->frag->fr_literal + insn->where; | |
5c04167a RS |
2127 | if (HAVE_CODE_COMPRESSION) |
2128 | write_compressed_insn (f, insn->insn_opcode, insn_length (insn)); | |
1e915849 | 2129 | else |
4d68580a | 2130 | write_insn (f, insn->insn_opcode); |
df58fc94 | 2131 | mips_record_compressed_mode (); |
1e915849 RS |
2132 | } |
2133 | ||
2134 | /* Move INSN to offset WHERE in FRAG. Adjust the fixups accordingly | |
2135 | and install the opcode in the new location. */ | |
2136 | ||
2137 | static void | |
2138 | move_insn (struct mips_cl_insn *insn, fragS *frag, long where) | |
2139 | { | |
2140 | size_t i; | |
2141 | ||
2142 | insn->frag = frag; | |
2143 | insn->where = where; | |
2144 | for (i = 0; i < ARRAY_SIZE (insn->fixp); i++) | |
2145 | if (insn->fixp[i] != NULL) | |
2146 | { | |
2147 | insn->fixp[i]->fx_frag = frag; | |
2148 | insn->fixp[i]->fx_where = where; | |
2149 | } | |
2150 | install_insn (insn); | |
2151 | } | |
2152 | ||
2153 | /* Add INSN to the end of the output. */ | |
2154 | ||
2155 | static void | |
2156 | add_fixed_insn (struct mips_cl_insn *insn) | |
2157 | { | |
2158 | char *f = frag_more (insn_length (insn)); | |
2159 | move_insn (insn, frag_now, f - frag_now->fr_literal); | |
2160 | } | |
2161 | ||
2162 | /* Start a variant frag and move INSN to the start of the variant part, | |
2163 | marking it as fixed. The other arguments are as for frag_var. */ | |
2164 | ||
2165 | static void | |
2166 | add_relaxed_insn (struct mips_cl_insn *insn, int max_chars, int var, | |
2167 | relax_substateT subtype, symbolS *symbol, offsetT offset) | |
2168 | { | |
2169 | frag_grow (max_chars); | |
2170 | move_insn (insn, frag_now, frag_more (0) - frag_now->fr_literal); | |
2171 | insn->fixed_p = 1; | |
2172 | frag_var (rs_machine_dependent, max_chars, var, | |
2173 | subtype, symbol, offset, NULL); | |
2174 | } | |
2175 | ||
2176 | /* Insert N copies of INSN into the history buffer, starting at | |
2177 | position FIRST. Neither FIRST nor N need to be clipped. */ | |
2178 | ||
2179 | static void | |
2180 | insert_into_history (unsigned int first, unsigned int n, | |
2181 | const struct mips_cl_insn *insn) | |
2182 | { | |
2183 | if (mips_relax.sequence != 2) | |
2184 | { | |
2185 | unsigned int i; | |
2186 | ||
2187 | for (i = ARRAY_SIZE (history); i-- > first;) | |
2188 | if (i >= first + n) | |
2189 | history[i] = history[i - n]; | |
2190 | else | |
2191 | history[i] = *insn; | |
2192 | } | |
2193 | } | |
2194 | ||
e3de51ce RS |
2195 | /* Clear the error in insn_error. */ |
2196 | ||
2197 | static void | |
2198 | clear_insn_error (void) | |
2199 | { | |
2200 | memset (&insn_error, 0, sizeof (insn_error)); | |
2201 | } | |
2202 | ||
2203 | /* Possibly record error message MSG for the current instruction. | |
2204 | If the error is about a particular argument, ARGNUM is the 1-based | |
2205 | number of that argument, otherwise it is 0. FORMAT is the format | |
2206 | of MSG. Return true if MSG was used, false if the current message | |
2207 | was kept. */ | |
2208 | ||
2209 | static bfd_boolean | |
2210 | set_insn_error_format (int argnum, enum mips_insn_error_format format, | |
2211 | const char *msg) | |
2212 | { | |
2213 | if (argnum == 0) | |
2214 | { | |
2215 | /* Give priority to errors against specific arguments, and to | |
2216 | the first whole-instruction message. */ | |
2217 | if (insn_error.msg) | |
2218 | return FALSE; | |
2219 | } | |
2220 | else | |
2221 | { | |
2222 | /* Keep insn_error if it is against a later argument. */ | |
2223 | if (argnum < insn_error.min_argnum) | |
2224 | return FALSE; | |
2225 | ||
2226 | /* If both errors are against the same argument but are different, | |
2227 | give up on reporting a specific error for this argument. | |
2228 | See the comment about mips_insn_error for details. */ | |
2229 | if (argnum == insn_error.min_argnum | |
2230 | && insn_error.msg | |
2231 | && strcmp (insn_error.msg, msg) != 0) | |
2232 | { | |
2233 | insn_error.msg = 0; | |
2234 | insn_error.min_argnum += 1; | |
2235 | return FALSE; | |
2236 | } | |
2237 | } | |
2238 | insn_error.min_argnum = argnum; | |
2239 | insn_error.format = format; | |
2240 | insn_error.msg = msg; | |
2241 | return TRUE; | |
2242 | } | |
2243 | ||
2244 | /* Record an instruction error with no % format fields. ARGNUM and MSG are | |
2245 | as for set_insn_error_format. */ | |
2246 | ||
2247 | static void | |
2248 | set_insn_error (int argnum, const char *msg) | |
2249 | { | |
2250 | set_insn_error_format (argnum, ERR_FMT_PLAIN, msg); | |
2251 | } | |
2252 | ||
2253 | /* Record an instruction error with one %d field I. ARGNUM and MSG are | |
2254 | as for set_insn_error_format. */ | |
2255 | ||
2256 | static void | |
2257 | set_insn_error_i (int argnum, const char *msg, int i) | |
2258 | { | |
2259 | if (set_insn_error_format (argnum, ERR_FMT_I, msg)) | |
2260 | insn_error.u.i = i; | |
2261 | } | |
2262 | ||
2263 | /* Record an instruction error with two %s fields S1 and S2. ARGNUM and MSG | |
2264 | are as for set_insn_error_format. */ | |
2265 | ||
2266 | static void | |
2267 | set_insn_error_ss (int argnum, const char *msg, const char *s1, const char *s2) | |
2268 | { | |
2269 | if (set_insn_error_format (argnum, ERR_FMT_SS, msg)) | |
2270 | { | |
2271 | insn_error.u.ss[0] = s1; | |
2272 | insn_error.u.ss[1] = s2; | |
2273 | } | |
2274 | } | |
2275 | ||
2276 | /* Report the error in insn_error, which is against assembly code STR. */ | |
2277 | ||
2278 | static void | |
2279 | report_insn_error (const char *str) | |
2280 | { | |
2281 | const char *msg; | |
2282 | ||
2283 | msg = ACONCAT ((insn_error.msg, " `%s'", NULL)); | |
2284 | switch (insn_error.format) | |
2285 | { | |
2286 | case ERR_FMT_PLAIN: | |
2287 | as_bad (msg, str); | |
2288 | break; | |
2289 | ||
2290 | case ERR_FMT_I: | |
2291 | as_bad (msg, insn_error.u.i, str); | |
2292 | break; | |
2293 | ||
2294 | case ERR_FMT_SS: | |
2295 | as_bad (msg, insn_error.u.ss[0], insn_error.u.ss[1], str); | |
2296 | break; | |
2297 | } | |
2298 | } | |
2299 | ||
71400594 RS |
2300 | /* Initialize vr4120_conflicts. There is a bit of duplication here: |
2301 | the idea is to make it obvious at a glance that each errata is | |
2302 | included. */ | |
2303 | ||
2304 | static void | |
2305 | init_vr4120_conflicts (void) | |
2306 | { | |
2307 | #define CONFLICT(FIRST, SECOND) \ | |
2308 | vr4120_conflicts[FIX_VR4120_##FIRST] |= 1 << FIX_VR4120_##SECOND | |
2309 | ||
2310 | /* Errata 21 - [D]DIV[U] after [D]MACC */ | |
2311 | CONFLICT (MACC, DIV); | |
2312 | CONFLICT (DMACC, DIV); | |
2313 | ||
2314 | /* Errata 23 - Continuous DMULT[U]/DMACC instructions. */ | |
2315 | CONFLICT (DMULT, DMULT); | |
2316 | CONFLICT (DMULT, DMACC); | |
2317 | CONFLICT (DMACC, DMULT); | |
2318 | CONFLICT (DMACC, DMACC); | |
2319 | ||
2320 | /* Errata 24 - MT{LO,HI} after [D]MACC */ | |
2321 | CONFLICT (MACC, MTHILO); | |
2322 | CONFLICT (DMACC, MTHILO); | |
2323 | ||
2324 | /* VR4181A errata MD(1): "If a MULT, MULTU, DMULT or DMULTU | |
2325 | instruction is executed immediately after a MACC or DMACC | |
2326 | instruction, the result of [either instruction] is incorrect." */ | |
2327 | CONFLICT (MACC, MULT); | |
2328 | CONFLICT (MACC, DMULT); | |
2329 | CONFLICT (DMACC, MULT); | |
2330 | CONFLICT (DMACC, DMULT); | |
2331 | ||
2332 | /* VR4181A errata MD(4): "If a MACC or DMACC instruction is | |
2333 | executed immediately after a DMULT, DMULTU, DIV, DIVU, | |
2334 | DDIV or DDIVU instruction, the result of the MACC or | |
2335 | DMACC instruction is incorrect.". */ | |
2336 | CONFLICT (DMULT, MACC); | |
2337 | CONFLICT (DMULT, DMACC); | |
2338 | CONFLICT (DIV, MACC); | |
2339 | CONFLICT (DIV, DMACC); | |
2340 | ||
2341 | #undef CONFLICT | |
2342 | } | |
2343 | ||
707bfff6 TS |
2344 | struct regname { |
2345 | const char *name; | |
2346 | unsigned int num; | |
2347 | }; | |
2348 | ||
14daeee3 RS |
2349 | #define RNUM_MASK 0x00000ff |
2350 | #define RTYPE_MASK 0x0efff00 | |
2351 | #define RTYPE_NUM 0x0000100 | |
2352 | #define RTYPE_FPU 0x0000200 | |
2353 | #define RTYPE_FCC 0x0000400 | |
2354 | #define RTYPE_VEC 0x0000800 | |
2355 | #define RTYPE_GP 0x0001000 | |
2356 | #define RTYPE_CP0 0x0002000 | |
2357 | #define RTYPE_PC 0x0004000 | |
2358 | #define RTYPE_ACC 0x0008000 | |
2359 | #define RTYPE_CCC 0x0010000 | |
2360 | #define RTYPE_VI 0x0020000 | |
2361 | #define RTYPE_VF 0x0040000 | |
2362 | #define RTYPE_R5900_I 0x0080000 | |
2363 | #define RTYPE_R5900_Q 0x0100000 | |
2364 | #define RTYPE_R5900_R 0x0200000 | |
2365 | #define RTYPE_R5900_ACC 0x0400000 | |
2366 | #define RWARN 0x8000000 | |
707bfff6 TS |
2367 | |
2368 | #define GENERIC_REGISTER_NUMBERS \ | |
2369 | {"$0", RTYPE_NUM | 0}, \ | |
2370 | {"$1", RTYPE_NUM | 1}, \ | |
2371 | {"$2", RTYPE_NUM | 2}, \ | |
2372 | {"$3", RTYPE_NUM | 3}, \ | |
2373 | {"$4", RTYPE_NUM | 4}, \ | |
2374 | {"$5", RTYPE_NUM | 5}, \ | |
2375 | {"$6", RTYPE_NUM | 6}, \ | |
2376 | {"$7", RTYPE_NUM | 7}, \ | |
2377 | {"$8", RTYPE_NUM | 8}, \ | |
2378 | {"$9", RTYPE_NUM | 9}, \ | |
2379 | {"$10", RTYPE_NUM | 10}, \ | |
2380 | {"$11", RTYPE_NUM | 11}, \ | |
2381 | {"$12", RTYPE_NUM | 12}, \ | |
2382 | {"$13", RTYPE_NUM | 13}, \ | |
2383 | {"$14", RTYPE_NUM | 14}, \ | |
2384 | {"$15", RTYPE_NUM | 15}, \ | |
2385 | {"$16", RTYPE_NUM | 16}, \ | |
2386 | {"$17", RTYPE_NUM | 17}, \ | |
2387 | {"$18", RTYPE_NUM | 18}, \ | |
2388 | {"$19", RTYPE_NUM | 19}, \ | |
2389 | {"$20", RTYPE_NUM | 20}, \ | |
2390 | {"$21", RTYPE_NUM | 21}, \ | |
2391 | {"$22", RTYPE_NUM | 22}, \ | |
2392 | {"$23", RTYPE_NUM | 23}, \ | |
2393 | {"$24", RTYPE_NUM | 24}, \ | |
2394 | {"$25", RTYPE_NUM | 25}, \ | |
2395 | {"$26", RTYPE_NUM | 26}, \ | |
2396 | {"$27", RTYPE_NUM | 27}, \ | |
2397 | {"$28", RTYPE_NUM | 28}, \ | |
2398 | {"$29", RTYPE_NUM | 29}, \ | |
2399 | {"$30", RTYPE_NUM | 30}, \ | |
2400 | {"$31", RTYPE_NUM | 31} | |
2401 | ||
2402 | #define FPU_REGISTER_NAMES \ | |
2403 | {"$f0", RTYPE_FPU | 0}, \ | |
2404 | {"$f1", RTYPE_FPU | 1}, \ | |
2405 | {"$f2", RTYPE_FPU | 2}, \ | |
2406 | {"$f3", RTYPE_FPU | 3}, \ | |
2407 | {"$f4", RTYPE_FPU | 4}, \ | |
2408 | {"$f5", RTYPE_FPU | 5}, \ | |
2409 | {"$f6", RTYPE_FPU | 6}, \ | |
2410 | {"$f7", RTYPE_FPU | 7}, \ | |
2411 | {"$f8", RTYPE_FPU | 8}, \ | |
2412 | {"$f9", RTYPE_FPU | 9}, \ | |
2413 | {"$f10", RTYPE_FPU | 10}, \ | |
2414 | {"$f11", RTYPE_FPU | 11}, \ | |
2415 | {"$f12", RTYPE_FPU | 12}, \ | |
2416 | {"$f13", RTYPE_FPU | 13}, \ | |
2417 | {"$f14", RTYPE_FPU | 14}, \ | |
2418 | {"$f15", RTYPE_FPU | 15}, \ | |
2419 | {"$f16", RTYPE_FPU | 16}, \ | |
2420 | {"$f17", RTYPE_FPU | 17}, \ | |
2421 | {"$f18", RTYPE_FPU | 18}, \ | |
2422 | {"$f19", RTYPE_FPU | 19}, \ | |
2423 | {"$f20", RTYPE_FPU | 20}, \ | |
2424 | {"$f21", RTYPE_FPU | 21}, \ | |
2425 | {"$f22", RTYPE_FPU | 22}, \ | |
2426 | {"$f23", RTYPE_FPU | 23}, \ | |
2427 | {"$f24", RTYPE_FPU | 24}, \ | |
2428 | {"$f25", RTYPE_FPU | 25}, \ | |
2429 | {"$f26", RTYPE_FPU | 26}, \ | |
2430 | {"$f27", RTYPE_FPU | 27}, \ | |
2431 | {"$f28", RTYPE_FPU | 28}, \ | |
2432 | {"$f29", RTYPE_FPU | 29}, \ | |
2433 | {"$f30", RTYPE_FPU | 30}, \ | |
2434 | {"$f31", RTYPE_FPU | 31} | |
2435 | ||
2436 | #define FPU_CONDITION_CODE_NAMES \ | |
2437 | {"$fcc0", RTYPE_FCC | 0}, \ | |
2438 | {"$fcc1", RTYPE_FCC | 1}, \ | |
2439 | {"$fcc2", RTYPE_FCC | 2}, \ | |
2440 | {"$fcc3", RTYPE_FCC | 3}, \ | |
2441 | {"$fcc4", RTYPE_FCC | 4}, \ | |
2442 | {"$fcc5", RTYPE_FCC | 5}, \ | |
2443 | {"$fcc6", RTYPE_FCC | 6}, \ | |
2444 | {"$fcc7", RTYPE_FCC | 7} | |
2445 | ||
2446 | #define COPROC_CONDITION_CODE_NAMES \ | |
2447 | {"$cc0", RTYPE_FCC | RTYPE_CCC | 0}, \ | |
2448 | {"$cc1", RTYPE_FCC | RTYPE_CCC | 1}, \ | |
2449 | {"$cc2", RTYPE_FCC | RTYPE_CCC | 2}, \ | |
2450 | {"$cc3", RTYPE_FCC | RTYPE_CCC | 3}, \ | |
2451 | {"$cc4", RTYPE_FCC | RTYPE_CCC | 4}, \ | |
2452 | {"$cc5", RTYPE_FCC | RTYPE_CCC | 5}, \ | |
2453 | {"$cc6", RTYPE_FCC | RTYPE_CCC | 6}, \ | |
2454 | {"$cc7", RTYPE_FCC | RTYPE_CCC | 7} | |
2455 | ||
2456 | #define N32N64_SYMBOLIC_REGISTER_NAMES \ | |
2457 | {"$a4", RTYPE_GP | 8}, \ | |
2458 | {"$a5", RTYPE_GP | 9}, \ | |
2459 | {"$a6", RTYPE_GP | 10}, \ | |
2460 | {"$a7", RTYPE_GP | 11}, \ | |
2461 | {"$ta0", RTYPE_GP | 8}, /* alias for $a4 */ \ | |
2462 | {"$ta1", RTYPE_GP | 9}, /* alias for $a5 */ \ | |
2463 | {"$ta2", RTYPE_GP | 10}, /* alias for $a6 */ \ | |
2464 | {"$ta3", RTYPE_GP | 11}, /* alias for $a7 */ \ | |
2465 | {"$t0", RTYPE_GP | 12}, \ | |
2466 | {"$t1", RTYPE_GP | 13}, \ | |
2467 | {"$t2", RTYPE_GP | 14}, \ | |
2468 | {"$t3", RTYPE_GP | 15} | |
2469 | ||
2470 | #define O32_SYMBOLIC_REGISTER_NAMES \ | |
2471 | {"$t0", RTYPE_GP | 8}, \ | |
2472 | {"$t1", RTYPE_GP | 9}, \ | |
2473 | {"$t2", RTYPE_GP | 10}, \ | |
2474 | {"$t3", RTYPE_GP | 11}, \ | |
2475 | {"$t4", RTYPE_GP | 12}, \ | |
2476 | {"$t5", RTYPE_GP | 13}, \ | |
2477 | {"$t6", RTYPE_GP | 14}, \ | |
2478 | {"$t7", RTYPE_GP | 15}, \ | |
2479 | {"$ta0", RTYPE_GP | 12}, /* alias for $t4 */ \ | |
2480 | {"$ta1", RTYPE_GP | 13}, /* alias for $t5 */ \ | |
2481 | {"$ta2", RTYPE_GP | 14}, /* alias for $t6 */ \ | |
2482 | {"$ta3", RTYPE_GP | 15} /* alias for $t7 */ | |
2483 | ||
2484 | /* Remaining symbolic register names */ | |
2485 | #define SYMBOLIC_REGISTER_NAMES \ | |
2486 | {"$zero", RTYPE_GP | 0}, \ | |
2487 | {"$at", RTYPE_GP | 1}, \ | |
2488 | {"$AT", RTYPE_GP | 1}, \ | |
2489 | {"$v0", RTYPE_GP | 2}, \ | |
2490 | {"$v1", RTYPE_GP | 3}, \ | |
2491 | {"$a0", RTYPE_GP | 4}, \ | |
2492 | {"$a1", RTYPE_GP | 5}, \ | |
2493 | {"$a2", RTYPE_GP | 6}, \ | |
2494 | {"$a3", RTYPE_GP | 7}, \ | |
2495 | {"$s0", RTYPE_GP | 16}, \ | |
2496 | {"$s1", RTYPE_GP | 17}, \ | |
2497 | {"$s2", RTYPE_GP | 18}, \ | |
2498 | {"$s3", RTYPE_GP | 19}, \ | |
2499 | {"$s4", RTYPE_GP | 20}, \ | |
2500 | {"$s5", RTYPE_GP | 21}, \ | |
2501 | {"$s6", RTYPE_GP | 22}, \ | |
2502 | {"$s7", RTYPE_GP | 23}, \ | |
2503 | {"$t8", RTYPE_GP | 24}, \ | |
2504 | {"$t9", RTYPE_GP | 25}, \ | |
2505 | {"$k0", RTYPE_GP | 26}, \ | |
2506 | {"$kt0", RTYPE_GP | 26}, \ | |
2507 | {"$k1", RTYPE_GP | 27}, \ | |
2508 | {"$kt1", RTYPE_GP | 27}, \ | |
2509 | {"$gp", RTYPE_GP | 28}, \ | |
2510 | {"$sp", RTYPE_GP | 29}, \ | |
2511 | {"$s8", RTYPE_GP | 30}, \ | |
2512 | {"$fp", RTYPE_GP | 30}, \ | |
2513 | {"$ra", RTYPE_GP | 31} | |
2514 | ||
2515 | #define MIPS16_SPECIAL_REGISTER_NAMES \ | |
2516 | {"$pc", RTYPE_PC | 0} | |
2517 | ||
2518 | #define MDMX_VECTOR_REGISTER_NAMES \ | |
2519 | /* {"$v0", RTYPE_VEC | 0}, clash with REG 2 above */ \ | |
2520 | /* {"$v1", RTYPE_VEC | 1}, clash with REG 3 above */ \ | |
2521 | {"$v2", RTYPE_VEC | 2}, \ | |
2522 | {"$v3", RTYPE_VEC | 3}, \ | |
2523 | {"$v4", RTYPE_VEC | 4}, \ | |
2524 | {"$v5", RTYPE_VEC | 5}, \ | |
2525 | {"$v6", RTYPE_VEC | 6}, \ | |
2526 | {"$v7", RTYPE_VEC | 7}, \ | |
2527 | {"$v8", RTYPE_VEC | 8}, \ | |
2528 | {"$v9", RTYPE_VEC | 9}, \ | |
2529 | {"$v10", RTYPE_VEC | 10}, \ | |
2530 | {"$v11", RTYPE_VEC | 11}, \ | |
2531 | {"$v12", RTYPE_VEC | 12}, \ | |
2532 | {"$v13", RTYPE_VEC | 13}, \ | |
2533 | {"$v14", RTYPE_VEC | 14}, \ | |
2534 | {"$v15", RTYPE_VEC | 15}, \ | |
2535 | {"$v16", RTYPE_VEC | 16}, \ | |
2536 | {"$v17", RTYPE_VEC | 17}, \ | |
2537 | {"$v18", RTYPE_VEC | 18}, \ | |
2538 | {"$v19", RTYPE_VEC | 19}, \ | |
2539 | {"$v20", RTYPE_VEC | 20}, \ | |
2540 | {"$v21", RTYPE_VEC | 21}, \ | |
2541 | {"$v22", RTYPE_VEC | 22}, \ | |
2542 | {"$v23", RTYPE_VEC | 23}, \ | |
2543 | {"$v24", RTYPE_VEC | 24}, \ | |
2544 | {"$v25", RTYPE_VEC | 25}, \ | |
2545 | {"$v26", RTYPE_VEC | 26}, \ | |
2546 | {"$v27", RTYPE_VEC | 27}, \ | |
2547 | {"$v28", RTYPE_VEC | 28}, \ | |
2548 | {"$v29", RTYPE_VEC | 29}, \ | |
2549 | {"$v30", RTYPE_VEC | 30}, \ | |
2550 | {"$v31", RTYPE_VEC | 31} | |
2551 | ||
14daeee3 RS |
2552 | #define R5900_I_NAMES \ |
2553 | {"$I", RTYPE_R5900_I | 0} | |
2554 | ||
2555 | #define R5900_Q_NAMES \ | |
2556 | {"$Q", RTYPE_R5900_Q | 0} | |
2557 | ||
2558 | #define R5900_R_NAMES \ | |
2559 | {"$R", RTYPE_R5900_R | 0} | |
2560 | ||
2561 | #define R5900_ACC_NAMES \ | |
2562 | {"$ACC", RTYPE_R5900_ACC | 0 } | |
2563 | ||
707bfff6 TS |
2564 | #define MIPS_DSP_ACCUMULATOR_NAMES \ |
2565 | {"$ac0", RTYPE_ACC | 0}, \ | |
2566 | {"$ac1", RTYPE_ACC | 1}, \ | |
2567 | {"$ac2", RTYPE_ACC | 2}, \ | |
2568 | {"$ac3", RTYPE_ACC | 3} | |
2569 | ||
2570 | static const struct regname reg_names[] = { | |
2571 | GENERIC_REGISTER_NUMBERS, | |
2572 | FPU_REGISTER_NAMES, | |
2573 | FPU_CONDITION_CODE_NAMES, | |
2574 | COPROC_CONDITION_CODE_NAMES, | |
2575 | ||
2576 | /* The $txx registers depends on the abi, | |
2577 | these will be added later into the symbol table from | |
2578 | one of the tables below once mips_abi is set after | |
2579 | parsing of arguments from the command line. */ | |
2580 | SYMBOLIC_REGISTER_NAMES, | |
2581 | ||
2582 | MIPS16_SPECIAL_REGISTER_NAMES, | |
2583 | MDMX_VECTOR_REGISTER_NAMES, | |
14daeee3 RS |
2584 | R5900_I_NAMES, |
2585 | R5900_Q_NAMES, | |
2586 | R5900_R_NAMES, | |
2587 | R5900_ACC_NAMES, | |
707bfff6 TS |
2588 | MIPS_DSP_ACCUMULATOR_NAMES, |
2589 | {0, 0} | |
2590 | }; | |
2591 | ||
2592 | static const struct regname reg_names_o32[] = { | |
2593 | O32_SYMBOLIC_REGISTER_NAMES, | |
2594 | {0, 0} | |
2595 | }; | |
2596 | ||
2597 | static const struct regname reg_names_n32n64[] = { | |
2598 | N32N64_SYMBOLIC_REGISTER_NAMES, | |
2599 | {0, 0} | |
2600 | }; | |
2601 | ||
a92713e6 RS |
2602 | /* Register symbols $v0 and $v1 map to GPRs 2 and 3, but they can also be |
2603 | interpreted as vector registers 0 and 1. If SYMVAL is the value of one | |
2604 | of these register symbols, return the associated vector register, | |
2605 | otherwise return SYMVAL itself. */ | |
df58fc94 | 2606 | |
a92713e6 RS |
2607 | static unsigned int |
2608 | mips_prefer_vec_regno (unsigned int symval) | |
707bfff6 | 2609 | { |
a92713e6 RS |
2610 | if ((symval & -2) == (RTYPE_GP | 2)) |
2611 | return RTYPE_VEC | (symval & 1); | |
2612 | return symval; | |
2613 | } | |
2614 | ||
14daeee3 RS |
2615 | /* Return true if string [S, E) is a valid register name, storing its |
2616 | symbol value in *SYMVAL_PTR if so. */ | |
a92713e6 RS |
2617 | |
2618 | static bfd_boolean | |
14daeee3 | 2619 | mips_parse_register_1 (char *s, char *e, unsigned int *symval_ptr) |
a92713e6 | 2620 | { |
707bfff6 | 2621 | char save_c; |
14daeee3 | 2622 | symbolS *symbol; |
707bfff6 TS |
2623 | |
2624 | /* Terminate name. */ | |
2625 | save_c = *e; | |
2626 | *e = '\0'; | |
2627 | ||
a92713e6 RS |
2628 | /* Look up the name. */ |
2629 | symbol = symbol_find (s); | |
2630 | *e = save_c; | |
2631 | ||
2632 | if (!symbol || S_GET_SEGMENT (symbol) != reg_section) | |
2633 | return FALSE; | |
2634 | ||
14daeee3 RS |
2635 | *symval_ptr = S_GET_VALUE (symbol); |
2636 | return TRUE; | |
2637 | } | |
2638 | ||
2639 | /* Return true if the string at *SPTR is a valid register name. Allow it | |
2640 | to have a VU0-style channel suffix of the form x?y?z?w? if CHANNELS_PTR | |
2641 | is nonnull. | |
2642 | ||
2643 | When returning true, move *SPTR past the register, store the | |
2644 | register's symbol value in *SYMVAL_PTR and the channel mask in | |
2645 | *CHANNELS_PTR (if nonnull). The symbol value includes the register | |
2646 | number (RNUM_MASK) and register type (RTYPE_MASK). The channel mask | |
2647 | is a 4-bit value of the form XYZW and is 0 if no suffix was given. */ | |
2648 | ||
2649 | static bfd_boolean | |
2650 | mips_parse_register (char **sptr, unsigned int *symval_ptr, | |
2651 | unsigned int *channels_ptr) | |
2652 | { | |
2653 | char *s, *e, *m; | |
2654 | const char *q; | |
2655 | unsigned int channels, symval, bit; | |
2656 | ||
2657 | /* Find end of name. */ | |
2658 | s = e = *sptr; | |
2659 | if (is_name_beginner (*e)) | |
2660 | ++e; | |
2661 | while (is_part_of_name (*e)) | |
2662 | ++e; | |
2663 | ||
2664 | channels = 0; | |
2665 | if (!mips_parse_register_1 (s, e, &symval)) | |
2666 | { | |
2667 | if (!channels_ptr) | |
2668 | return FALSE; | |
2669 | ||
2670 | /* Eat characters from the end of the string that are valid | |
2671 | channel suffixes. The preceding register must be $ACC or | |
2672 | end with a digit, so there is no ambiguity. */ | |
2673 | bit = 1; | |
2674 | m = e; | |
2675 | for (q = "wzyx"; *q; q++, bit <<= 1) | |
2676 | if (m > s && m[-1] == *q) | |
2677 | { | |
2678 | --m; | |
2679 | channels |= bit; | |
2680 | } | |
2681 | ||
2682 | if (channels == 0 | |
2683 | || !mips_parse_register_1 (s, m, &symval) | |
2684 | || (symval & (RTYPE_VI | RTYPE_VF | RTYPE_R5900_ACC)) == 0) | |
2685 | return FALSE; | |
2686 | } | |
2687 | ||
a92713e6 | 2688 | *sptr = e; |
14daeee3 RS |
2689 | *symval_ptr = symval; |
2690 | if (channels_ptr) | |
2691 | *channels_ptr = channels; | |
a92713e6 RS |
2692 | return TRUE; |
2693 | } | |
2694 | ||
2695 | /* Check if SPTR points at a valid register specifier according to TYPES. | |
2696 | If so, then return 1, advance S to consume the specifier and store | |
2697 | the register's number in REGNOP, otherwise return 0. */ | |
2698 | ||
2699 | static int | |
2700 | reg_lookup (char **s, unsigned int types, unsigned int *regnop) | |
2701 | { | |
2702 | unsigned int regno; | |
2703 | ||
14daeee3 | 2704 | if (mips_parse_register (s, ®no, NULL)) |
707bfff6 | 2705 | { |
a92713e6 RS |
2706 | if (types & RTYPE_VEC) |
2707 | regno = mips_prefer_vec_regno (regno); | |
2708 | if (regno & types) | |
2709 | regno &= RNUM_MASK; | |
2710 | else | |
2711 | regno = ~0; | |
707bfff6 | 2712 | } |
a92713e6 | 2713 | else |
707bfff6 | 2714 | { |
a92713e6 | 2715 | if (types & RWARN) |
1661c76c | 2716 | as_warn (_("unrecognized register name `%s'"), *s); |
a92713e6 | 2717 | regno = ~0; |
707bfff6 | 2718 | } |
707bfff6 | 2719 | if (regnop) |
a92713e6 RS |
2720 | *regnop = regno; |
2721 | return regno <= RNUM_MASK; | |
707bfff6 TS |
2722 | } |
2723 | ||
14daeee3 RS |
2724 | /* Parse a VU0 "x?y?z?w?" channel mask at S and store the associated |
2725 | mask in *CHANNELS. Return a pointer to the first unconsumed character. */ | |
2726 | ||
2727 | static char * | |
2728 | mips_parse_vu0_channels (char *s, unsigned int *channels) | |
2729 | { | |
2730 | unsigned int i; | |
2731 | ||
2732 | *channels = 0; | |
2733 | for (i = 0; i < 4; i++) | |
2734 | if (*s == "xyzw"[i]) | |
2735 | { | |
2736 | *channels |= 1 << (3 - i); | |
2737 | ++s; | |
2738 | } | |
2739 | return s; | |
2740 | } | |
2741 | ||
a92713e6 RS |
2742 | /* Token types for parsed operand lists. */ |
2743 | enum mips_operand_token_type { | |
2744 | /* A plain register, e.g. $f2. */ | |
2745 | OT_REG, | |
df58fc94 | 2746 | |
14daeee3 RS |
2747 | /* A 4-bit XYZW channel mask. */ |
2748 | OT_CHANNELS, | |
2749 | ||
a92713e6 RS |
2750 | /* An element of a vector, e.g. $v0[1]. */ |
2751 | OT_REG_ELEMENT, | |
df58fc94 | 2752 | |
a92713e6 RS |
2753 | /* A continuous range of registers, e.g. $s0-$s4. */ |
2754 | OT_REG_RANGE, | |
2755 | ||
2756 | /* A (possibly relocated) expression. */ | |
2757 | OT_INTEGER, | |
2758 | ||
2759 | /* A floating-point value. */ | |
2760 | OT_FLOAT, | |
2761 | ||
2762 | /* A single character. This can be '(', ')' or ',', but '(' only appears | |
2763 | before OT_REGs. */ | |
2764 | OT_CHAR, | |
2765 | ||
14daeee3 RS |
2766 | /* A doubled character, either "--" or "++". */ |
2767 | OT_DOUBLE_CHAR, | |
2768 | ||
a92713e6 RS |
2769 | /* The end of the operand list. */ |
2770 | OT_END | |
2771 | }; | |
2772 | ||
2773 | /* A parsed operand token. */ | |
2774 | struct mips_operand_token | |
2775 | { | |
2776 | /* The type of token. */ | |
2777 | enum mips_operand_token_type type; | |
2778 | union | |
2779 | { | |
2780 | /* The register symbol value for an OT_REG. */ | |
2781 | unsigned int regno; | |
2782 | ||
14daeee3 RS |
2783 | /* The 4-bit channel mask for an OT_CHANNEL_SUFFIX. */ |
2784 | unsigned int channels; | |
2785 | ||
a92713e6 RS |
2786 | /* The register symbol value and index for an OT_REG_ELEMENT. */ |
2787 | struct { | |
2788 | unsigned int regno; | |
2789 | addressT index; | |
2790 | } reg_element; | |
2791 | ||
2792 | /* The two register symbol values involved in an OT_REG_RANGE. */ | |
2793 | struct { | |
2794 | unsigned int regno1; | |
2795 | unsigned int regno2; | |
2796 | } reg_range; | |
2797 | ||
2798 | /* The value of an OT_INTEGER. The value is represented as an | |
2799 | expression and the relocation operators that were applied to | |
2800 | that expression. The reloc entries are BFD_RELOC_UNUSED if no | |
2801 | relocation operators were used. */ | |
2802 | struct { | |
2803 | expressionS value; | |
2804 | bfd_reloc_code_real_type relocs[3]; | |
2805 | } integer; | |
2806 | ||
2807 | /* The binary data for an OT_FLOAT constant, and the number of bytes | |
2808 | in the constant. */ | |
2809 | struct { | |
2810 | unsigned char data[8]; | |
2811 | int length; | |
2812 | } flt; | |
2813 | ||
14daeee3 | 2814 | /* The character represented by an OT_CHAR or OT_DOUBLE_CHAR. */ |
a92713e6 RS |
2815 | char ch; |
2816 | } u; | |
2817 | }; | |
2818 | ||
2819 | /* An obstack used to construct lists of mips_operand_tokens. */ | |
2820 | static struct obstack mips_operand_tokens; | |
2821 | ||
2822 | /* Give TOKEN type TYPE and add it to mips_operand_tokens. */ | |
2823 | ||
2824 | static void | |
2825 | mips_add_token (struct mips_operand_token *token, | |
2826 | enum mips_operand_token_type type) | |
2827 | { | |
2828 | token->type = type; | |
2829 | obstack_grow (&mips_operand_tokens, token, sizeof (*token)); | |
2830 | } | |
2831 | ||
2832 | /* Check whether S is '(' followed by a register name. Add OT_CHAR | |
2833 | and OT_REG tokens for them if so, and return a pointer to the first | |
2834 | unconsumed character. Return null otherwise. */ | |
2835 | ||
2836 | static char * | |
2837 | mips_parse_base_start (char *s) | |
2838 | { | |
2839 | struct mips_operand_token token; | |
14daeee3 RS |
2840 | unsigned int regno, channels; |
2841 | bfd_boolean decrement_p; | |
df58fc94 | 2842 | |
a92713e6 RS |
2843 | if (*s != '(') |
2844 | return 0; | |
2845 | ||
2846 | ++s; | |
2847 | SKIP_SPACE_TABS (s); | |
14daeee3 RS |
2848 | |
2849 | /* Only match "--" as part of a base expression. In other contexts "--X" | |
2850 | is a double negative. */ | |
2851 | decrement_p = (s[0] == '-' && s[1] == '-'); | |
2852 | if (decrement_p) | |
2853 | { | |
2854 | s += 2; | |
2855 | SKIP_SPACE_TABS (s); | |
2856 | } | |
2857 | ||
2858 | /* Allow a channel specifier because that leads to better error messages | |
2859 | than treating something like "$vf0x++" as an expression. */ | |
2860 | if (!mips_parse_register (&s, ®no, &channels)) | |
a92713e6 RS |
2861 | return 0; |
2862 | ||
2863 | token.u.ch = '('; | |
2864 | mips_add_token (&token, OT_CHAR); | |
2865 | ||
14daeee3 RS |
2866 | if (decrement_p) |
2867 | { | |
2868 | token.u.ch = '-'; | |
2869 | mips_add_token (&token, OT_DOUBLE_CHAR); | |
2870 | } | |
2871 | ||
a92713e6 RS |
2872 | token.u.regno = regno; |
2873 | mips_add_token (&token, OT_REG); | |
2874 | ||
14daeee3 RS |
2875 | if (channels) |
2876 | { | |
2877 | token.u.channels = channels; | |
2878 | mips_add_token (&token, OT_CHANNELS); | |
2879 | } | |
2880 | ||
2881 | /* For consistency, only match "++" as part of base expressions too. */ | |
2882 | SKIP_SPACE_TABS (s); | |
2883 | if (s[0] == '+' && s[1] == '+') | |
2884 | { | |
2885 | s += 2; | |
2886 | token.u.ch = '+'; | |
2887 | mips_add_token (&token, OT_DOUBLE_CHAR); | |
2888 | } | |
2889 | ||
a92713e6 RS |
2890 | return s; |
2891 | } | |
2892 | ||
2893 | /* Parse one or more tokens from S. Return a pointer to the first | |
2894 | unconsumed character on success. Return null if an error was found | |
2895 | and store the error text in insn_error. FLOAT_FORMAT is as for | |
2896 | mips_parse_arguments. */ | |
2897 | ||
2898 | static char * | |
2899 | mips_parse_argument_token (char *s, char float_format) | |
2900 | { | |
2901 | char *end, *save_in, *err; | |
14daeee3 | 2902 | unsigned int regno1, regno2, channels; |
a92713e6 RS |
2903 | struct mips_operand_token token; |
2904 | ||
2905 | /* First look for "($reg", since we want to treat that as an | |
2906 | OT_CHAR and OT_REG rather than an expression. */ | |
2907 | end = mips_parse_base_start (s); | |
2908 | if (end) | |
2909 | return end; | |
2910 | ||
2911 | /* Handle other characters that end up as OT_CHARs. */ | |
2912 | if (*s == ')' || *s == ',') | |
2913 | { | |
2914 | token.u.ch = *s; | |
2915 | mips_add_token (&token, OT_CHAR); | |
2916 | ++s; | |
2917 | return s; | |
2918 | } | |
2919 | ||
2920 | /* Handle tokens that start with a register. */ | |
14daeee3 | 2921 | if (mips_parse_register (&s, ®no1, &channels)) |
df58fc94 | 2922 | { |
14daeee3 RS |
2923 | if (channels) |
2924 | { | |
2925 | /* A register and a VU0 channel suffix. */ | |
2926 | token.u.regno = regno1; | |
2927 | mips_add_token (&token, OT_REG); | |
2928 | ||
2929 | token.u.channels = channels; | |
2930 | mips_add_token (&token, OT_CHANNELS); | |
2931 | return s; | |
2932 | } | |
2933 | ||
a92713e6 RS |
2934 | SKIP_SPACE_TABS (s); |
2935 | if (*s == '-') | |
df58fc94 | 2936 | { |
a92713e6 RS |
2937 | /* A register range. */ |
2938 | ++s; | |
2939 | SKIP_SPACE_TABS (s); | |
14daeee3 | 2940 | if (!mips_parse_register (&s, ®no2, NULL)) |
a92713e6 | 2941 | { |
1661c76c | 2942 | set_insn_error (0, _("invalid register range")); |
a92713e6 RS |
2943 | return 0; |
2944 | } | |
df58fc94 | 2945 | |
a92713e6 RS |
2946 | token.u.reg_range.regno1 = regno1; |
2947 | token.u.reg_range.regno2 = regno2; | |
2948 | mips_add_token (&token, OT_REG_RANGE); | |
2949 | return s; | |
2950 | } | |
2951 | else if (*s == '[') | |
df58fc94 | 2952 | { |
a92713e6 RS |
2953 | /* A vector element. */ |
2954 | expressionS element; | |
2955 | ||
2956 | ++s; | |
2957 | SKIP_SPACE_TABS (s); | |
2958 | my_getExpression (&element, s); | |
2959 | if (element.X_op != O_constant) | |
2960 | { | |
1661c76c | 2961 | set_insn_error (0, _("vector element must be constant")); |
a92713e6 RS |
2962 | return 0; |
2963 | } | |
2964 | s = expr_end; | |
2965 | SKIP_SPACE_TABS (s); | |
2966 | if (*s != ']') | |
2967 | { | |
1661c76c | 2968 | set_insn_error (0, _("missing `]'")); |
a92713e6 RS |
2969 | return 0; |
2970 | } | |
2971 | ++s; | |
2972 | ||
2973 | token.u.reg_element.regno = regno1; | |
2974 | token.u.reg_element.index = element.X_add_number; | |
2975 | mips_add_token (&token, OT_REG_ELEMENT); | |
2976 | return s; | |
df58fc94 | 2977 | } |
df58fc94 | 2978 | |
a92713e6 RS |
2979 | /* Looks like just a plain register. */ |
2980 | token.u.regno = regno1; | |
2981 | mips_add_token (&token, OT_REG); | |
2982 | return s; | |
df58fc94 RS |
2983 | } |
2984 | ||
a92713e6 RS |
2985 | if (float_format) |
2986 | { | |
2987 | /* First try to treat expressions as floats. */ | |
2988 | save_in = input_line_pointer; | |
2989 | input_line_pointer = s; | |
2990 | err = md_atof (float_format, (char *) token.u.flt.data, | |
2991 | &token.u.flt.length); | |
2992 | end = input_line_pointer; | |
2993 | input_line_pointer = save_in; | |
2994 | if (err && *err) | |
2995 | { | |
e3de51ce | 2996 | set_insn_error (0, err); |
a92713e6 RS |
2997 | return 0; |
2998 | } | |
2999 | if (s != end) | |
3000 | { | |
3001 | mips_add_token (&token, OT_FLOAT); | |
3002 | return end; | |
3003 | } | |
3004 | } | |
3005 | ||
3006 | /* Treat everything else as an integer expression. */ | |
3007 | token.u.integer.relocs[0] = BFD_RELOC_UNUSED; | |
3008 | token.u.integer.relocs[1] = BFD_RELOC_UNUSED; | |
3009 | token.u.integer.relocs[2] = BFD_RELOC_UNUSED; | |
3010 | my_getSmallExpression (&token.u.integer.value, token.u.integer.relocs, s); | |
3011 | s = expr_end; | |
3012 | mips_add_token (&token, OT_INTEGER); | |
3013 | return s; | |
3014 | } | |
3015 | ||
3016 | /* S points to the operand list for an instruction. FLOAT_FORMAT is 'f' | |
3017 | if expressions should be treated as 32-bit floating-point constants, | |
3018 | 'd' if they should be treated as 64-bit floating-point constants, | |
3019 | or 0 if they should be treated as integer expressions (the usual case). | |
3020 | ||
3021 | Return a list of tokens on success, otherwise return 0. The caller | |
3022 | must obstack_free the list after use. */ | |
3023 | ||
3024 | static struct mips_operand_token * | |
3025 | mips_parse_arguments (char *s, char float_format) | |
3026 | { | |
3027 | struct mips_operand_token token; | |
3028 | ||
3029 | SKIP_SPACE_TABS (s); | |
3030 | while (*s) | |
3031 | { | |
3032 | s = mips_parse_argument_token (s, float_format); | |
3033 | if (!s) | |
3034 | { | |
3035 | obstack_free (&mips_operand_tokens, | |
3036 | obstack_finish (&mips_operand_tokens)); | |
3037 | return 0; | |
3038 | } | |
3039 | SKIP_SPACE_TABS (s); | |
3040 | } | |
3041 | mips_add_token (&token, OT_END); | |
3042 | return (struct mips_operand_token *) obstack_finish (&mips_operand_tokens); | |
df58fc94 RS |
3043 | } |
3044 | ||
d301a56b RS |
3045 | /* Return TRUE if opcode MO is valid on the currently selected ISA, ASE |
3046 | and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */ | |
037b32b9 AN |
3047 | |
3048 | static bfd_boolean | |
f79e2745 | 3049 | is_opcode_valid (const struct mips_opcode *mo) |
037b32b9 AN |
3050 | { |
3051 | int isa = mips_opts.isa; | |
846ef2d0 | 3052 | int ase = mips_opts.ase; |
037b32b9 | 3053 | int fp_s, fp_d; |
c6278170 | 3054 | unsigned int i; |
037b32b9 | 3055 | |
c6278170 RS |
3056 | if (ISA_HAS_64BIT_REGS (mips_opts.isa)) |
3057 | for (i = 0; i < ARRAY_SIZE (mips_ases); i++) | |
3058 | if ((ase & mips_ases[i].flags) == mips_ases[i].flags) | |
3059 | ase |= mips_ases[i].flags64; | |
037b32b9 | 3060 | |
d301a56b | 3061 | if (!opcode_is_member (mo, isa, ase, mips_opts.arch)) |
037b32b9 AN |
3062 | return FALSE; |
3063 | ||
3064 | /* Check whether the instruction or macro requires single-precision or | |
3065 | double-precision floating-point support. Note that this information is | |
3066 | stored differently in the opcode table for insns and macros. */ | |
3067 | if (mo->pinfo == INSN_MACRO) | |
3068 | { | |
3069 | fp_s = mo->pinfo2 & INSN2_M_FP_S; | |
3070 | fp_d = mo->pinfo2 & INSN2_M_FP_D; | |
3071 | } | |
3072 | else | |
3073 | { | |
3074 | fp_s = mo->pinfo & FP_S; | |
3075 | fp_d = mo->pinfo & FP_D; | |
3076 | } | |
3077 | ||
3078 | if (fp_d && (mips_opts.soft_float || mips_opts.single_float)) | |
3079 | return FALSE; | |
3080 | ||
3081 | if (fp_s && mips_opts.soft_float) | |
3082 | return FALSE; | |
3083 | ||
3084 | return TRUE; | |
3085 | } | |
3086 | ||
3087 | /* Return TRUE if the MIPS16 opcode MO is valid on the currently | |
3088 | selected ISA and architecture. */ | |
3089 | ||
3090 | static bfd_boolean | |
3091 | is_opcode_valid_16 (const struct mips_opcode *mo) | |
3092 | { | |
d301a56b | 3093 | return opcode_is_member (mo, mips_opts.isa, 0, mips_opts.arch); |
037b32b9 AN |
3094 | } |
3095 | ||
df58fc94 RS |
3096 | /* Return TRUE if the size of the microMIPS opcode MO matches one |
3097 | explicitly requested. Always TRUE in the standard MIPS mode. */ | |
3098 | ||
3099 | static bfd_boolean | |
3100 | is_size_valid (const struct mips_opcode *mo) | |
3101 | { | |
3102 | if (!mips_opts.micromips) | |
3103 | return TRUE; | |
3104 | ||
833794fc MR |
3105 | if (mips_opts.insn32) |
3106 | { | |
3107 | if (mo->pinfo != INSN_MACRO && micromips_insn_length (mo) != 4) | |
3108 | return FALSE; | |
3109 | if ((mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0) | |
3110 | return FALSE; | |
3111 | } | |
df58fc94 RS |
3112 | if (!forced_insn_length) |
3113 | return TRUE; | |
3114 | if (mo->pinfo == INSN_MACRO) | |
3115 | return FALSE; | |
3116 | return forced_insn_length == micromips_insn_length (mo); | |
3117 | } | |
3118 | ||
3119 | /* Return TRUE if the microMIPS opcode MO is valid for the delay slot | |
e64af278 MR |
3120 | of the preceding instruction. Always TRUE in the standard MIPS mode. |
3121 | ||
3122 | We don't accept macros in 16-bit delay slots to avoid a case where | |
3123 | a macro expansion fails because it relies on a preceding 32-bit real | |
3124 | instruction to have matched and does not handle the operands correctly. | |
3125 | The only macros that may expand to 16-bit instructions are JAL that | |
3126 | cannot be placed in a delay slot anyway, and corner cases of BALIGN | |
3127 | and BGT (that likewise cannot be placed in a delay slot) that decay to | |
3128 | a NOP. In all these cases the macros precede any corresponding real | |
3129 | instruction definitions in the opcode table, so they will match in the | |
3130 | second pass where the size of the delay slot is ignored and therefore | |
3131 | produce correct code. */ | |
df58fc94 RS |
3132 | |
3133 | static bfd_boolean | |
3134 | is_delay_slot_valid (const struct mips_opcode *mo) | |
3135 | { | |
3136 | if (!mips_opts.micromips) | |
3137 | return TRUE; | |
3138 | ||
3139 | if (mo->pinfo == INSN_MACRO) | |
c06dec14 | 3140 | return (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) == 0; |
df58fc94 RS |
3141 | if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0 |
3142 | && micromips_insn_length (mo) != 4) | |
3143 | return FALSE; | |
3144 | if ((history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 | |
3145 | && micromips_insn_length (mo) != 2) | |
3146 | return FALSE; | |
3147 | ||
3148 | return TRUE; | |
3149 | } | |
3150 | ||
fc76e730 RS |
3151 | /* For consistency checking, verify that all bits of OPCODE are specified |
3152 | either by the match/mask part of the instruction definition, or by the | |
3153 | operand list. Also build up a list of operands in OPERANDS. | |
3154 | ||
3155 | INSN_BITS says which bits of the instruction are significant. | |
3156 | If OPCODE is a standard or microMIPS instruction, DECODE_OPERAND | |
3157 | provides the mips_operand description of each operand. DECODE_OPERAND | |
3158 | is null for MIPS16 instructions. */ | |
ab902481 RS |
3159 | |
3160 | static int | |
3161 | validate_mips_insn (const struct mips_opcode *opcode, | |
3162 | unsigned long insn_bits, | |
fc76e730 RS |
3163 | const struct mips_operand *(*decode_operand) (const char *), |
3164 | struct mips_operand_array *operands) | |
ab902481 RS |
3165 | { |
3166 | const char *s; | |
fc76e730 | 3167 | unsigned long used_bits, doubled, undefined, opno, mask; |
ab902481 RS |
3168 | const struct mips_operand *operand; |
3169 | ||
fc76e730 RS |
3170 | mask = (opcode->pinfo == INSN_MACRO ? 0 : opcode->mask); |
3171 | if ((mask & opcode->match) != opcode->match) | |
ab902481 RS |
3172 | { |
3173 | as_bad (_("internal: bad mips opcode (mask error): %s %s"), | |
3174 | opcode->name, opcode->args); | |
3175 | return 0; | |
3176 | } | |
3177 | used_bits = 0; | |
fc76e730 | 3178 | opno = 0; |
14daeee3 RS |
3179 | if (opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) |
3180 | used_bits = mips_insert_operand (&mips_vu0_channel_mask, used_bits, -1); | |
ab902481 RS |
3181 | for (s = opcode->args; *s; ++s) |
3182 | switch (*s) | |
3183 | { | |
3184 | case ',': | |
3185 | case '(': | |
3186 | case ')': | |
3187 | break; | |
3188 | ||
14daeee3 RS |
3189 | case '#': |
3190 | s++; | |
3191 | break; | |
3192 | ||
ab902481 | 3193 | default: |
fc76e730 RS |
3194 | if (!decode_operand) |
3195 | operand = decode_mips16_operand (*s, FALSE); | |
3196 | else | |
3197 | operand = decode_operand (s); | |
3198 | if (!operand && opcode->pinfo != INSN_MACRO) | |
ab902481 RS |
3199 | { |
3200 | as_bad (_("internal: unknown operand type: %s %s"), | |
3201 | opcode->name, opcode->args); | |
3202 | return 0; | |
3203 | } | |
fc76e730 RS |
3204 | gas_assert (opno < MAX_OPERANDS); |
3205 | operands->operand[opno] = operand; | |
14daeee3 | 3206 | if (operand && operand->type != OP_VU0_MATCH_SUFFIX) |
fc76e730 | 3207 | { |
14daeee3 | 3208 | used_bits = mips_insert_operand (operand, used_bits, -1); |
fc76e730 RS |
3209 | if (operand->type == OP_MDMX_IMM_REG) |
3210 | /* Bit 5 is the format selector (OB vs QH). The opcode table | |
3211 | has separate entries for each format. */ | |
3212 | used_bits &= ~(1 << (operand->lsb + 5)); | |
3213 | if (operand->type == OP_ENTRY_EXIT_LIST) | |
3214 | used_bits &= ~(mask & 0x700); | |
3215 | } | |
ab902481 | 3216 | /* Skip prefix characters. */ |
fc76e730 | 3217 | if (decode_operand && (*s == '+' || *s == 'm')) |
ab902481 | 3218 | ++s; |
fc76e730 | 3219 | opno += 1; |
ab902481 RS |
3220 | break; |
3221 | } | |
fc76e730 | 3222 | doubled = used_bits & mask & insn_bits; |
ab902481 RS |
3223 | if (doubled) |
3224 | { | |
3225 | as_bad (_("internal: bad mips opcode (bits 0x%08lx doubly defined):" | |
3226 | " %s %s"), doubled, opcode->name, opcode->args); | |
3227 | return 0; | |
3228 | } | |
fc76e730 | 3229 | used_bits |= mask; |
ab902481 | 3230 | undefined = ~used_bits & insn_bits; |
fc76e730 | 3231 | if (opcode->pinfo != INSN_MACRO && undefined) |
ab902481 RS |
3232 | { |
3233 | as_bad (_("internal: bad mips opcode (bits 0x%08lx undefined): %s %s"), | |
3234 | undefined, opcode->name, opcode->args); | |
3235 | return 0; | |
3236 | } | |
3237 | used_bits &= ~insn_bits; | |
3238 | if (used_bits) | |
3239 | { | |
3240 | as_bad (_("internal: bad mips opcode (bits 0x%08lx defined): %s %s"), | |
3241 | used_bits, opcode->name, opcode->args); | |
3242 | return 0; | |
3243 | } | |
3244 | return 1; | |
3245 | } | |
3246 | ||
fc76e730 RS |
3247 | /* The MIPS16 version of validate_mips_insn. */ |
3248 | ||
3249 | static int | |
3250 | validate_mips16_insn (const struct mips_opcode *opcode, | |
3251 | struct mips_operand_array *operands) | |
3252 | { | |
3253 | if (opcode->args[0] == 'a' || opcode->args[0] == 'i') | |
3254 | { | |
3255 | /* In this case OPCODE defines the first 16 bits in a 32-bit jump | |
3256 | instruction. Use TMP to describe the full instruction. */ | |
3257 | struct mips_opcode tmp; | |
3258 | ||
3259 | tmp = *opcode; | |
3260 | tmp.match <<= 16; | |
3261 | tmp.mask <<= 16; | |
3262 | return validate_mips_insn (&tmp, 0xffffffff, 0, operands); | |
3263 | } | |
3264 | return validate_mips_insn (opcode, 0xffff, 0, operands); | |
3265 | } | |
3266 | ||
ab902481 RS |
3267 | /* The microMIPS version of validate_mips_insn. */ |
3268 | ||
3269 | static int | |
fc76e730 RS |
3270 | validate_micromips_insn (const struct mips_opcode *opc, |
3271 | struct mips_operand_array *operands) | |
ab902481 RS |
3272 | { |
3273 | unsigned long insn_bits; | |
3274 | unsigned long major; | |
3275 | unsigned int length; | |
3276 | ||
fc76e730 RS |
3277 | if (opc->pinfo == INSN_MACRO) |
3278 | return validate_mips_insn (opc, 0xffffffff, decode_micromips_operand, | |
3279 | operands); | |
3280 | ||
ab902481 RS |
3281 | length = micromips_insn_length (opc); |
3282 | if (length != 2 && length != 4) | |
3283 | { | |
1661c76c | 3284 | as_bad (_("internal error: bad microMIPS opcode (incorrect length: %u): " |
ab902481 RS |
3285 | "%s %s"), length, opc->name, opc->args); |
3286 | return 0; | |
3287 | } | |
3288 | major = opc->match >> (10 + 8 * (length - 2)); | |
3289 | if ((length == 2 && (major & 7) != 1 && (major & 6) != 2) | |
3290 | || (length == 4 && (major & 7) != 0 && (major & 4) != 4)) | |
3291 | { | |
1661c76c | 3292 | as_bad (_("internal error: bad microMIPS opcode " |
ab902481 RS |
3293 | "(opcode/length mismatch): %s %s"), opc->name, opc->args); |
3294 | return 0; | |
3295 | } | |
3296 | ||
3297 | /* Shift piecewise to avoid an overflow where unsigned long is 32-bit. */ | |
3298 | insn_bits = 1 << 4 * length; | |
3299 | insn_bits <<= 4 * length; | |
3300 | insn_bits -= 1; | |
fc76e730 RS |
3301 | return validate_mips_insn (opc, insn_bits, decode_micromips_operand, |
3302 | operands); | |
ab902481 RS |
3303 | } |
3304 | ||
707bfff6 TS |
3305 | /* This function is called once, at assembler startup time. It should set up |
3306 | all the tables, etc. that the MD part of the assembler will need. */ | |
156c2f8b | 3307 | |
252b5132 | 3308 | void |
17a2f251 | 3309 | md_begin (void) |
252b5132 | 3310 | { |
3994f87e | 3311 | const char *retval = NULL; |
156c2f8b | 3312 | int i = 0; |
252b5132 | 3313 | int broken = 0; |
1f25f5d3 | 3314 | |
0a44bf69 RS |
3315 | if (mips_pic != NO_PIC) |
3316 | { | |
3317 | if (g_switch_seen && g_switch_value != 0) | |
3318 | as_bad (_("-G may not be used in position-independent code")); | |
3319 | g_switch_value = 0; | |
3320 | } | |
3321 | ||
fef14a42 | 3322 | if (! bfd_set_arch_mach (stdoutput, bfd_arch_mips, file_mips_arch)) |
1661c76c | 3323 | as_warn (_("could not set architecture and machine")); |
252b5132 | 3324 | |
252b5132 RH |
3325 | op_hash = hash_new (); |
3326 | ||
fc76e730 | 3327 | mips_operands = XCNEWVEC (struct mips_operand_array, NUMOPCODES); |
252b5132 RH |
3328 | for (i = 0; i < NUMOPCODES;) |
3329 | { | |
3330 | const char *name = mips_opcodes[i].name; | |
3331 | ||
17a2f251 | 3332 | retval = hash_insert (op_hash, name, (void *) &mips_opcodes[i]); |
252b5132 RH |
3333 | if (retval != NULL) |
3334 | { | |
3335 | fprintf (stderr, _("internal error: can't hash `%s': %s\n"), | |
3336 | mips_opcodes[i].name, retval); | |
3337 | /* Probably a memory allocation problem? Give up now. */ | |
1661c76c | 3338 | as_fatal (_("broken assembler, no assembly attempted")); |
252b5132 RH |
3339 | } |
3340 | do | |
3341 | { | |
fc76e730 RS |
3342 | if (!validate_mips_insn (&mips_opcodes[i], 0xffffffff, |
3343 | decode_mips_operand, &mips_operands[i])) | |
3344 | broken = 1; | |
3345 | if (nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0) | |
252b5132 | 3346 | { |
fc76e730 RS |
3347 | create_insn (&nop_insn, mips_opcodes + i); |
3348 | if (mips_fix_loongson2f_nop) | |
3349 | nop_insn.insn_opcode = LOONGSON2F_NOP_INSN; | |
3350 | nop_insn.fixed_p = 1; | |
252b5132 RH |
3351 | } |
3352 | ++i; | |
3353 | } | |
3354 | while ((i < NUMOPCODES) && !strcmp (mips_opcodes[i].name, name)); | |
3355 | } | |
3356 | ||
3357 | mips16_op_hash = hash_new (); | |
fc76e730 RS |
3358 | mips16_operands = XCNEWVEC (struct mips_operand_array, |
3359 | bfd_mips16_num_opcodes); | |
252b5132 RH |
3360 | |
3361 | i = 0; | |
3362 | while (i < bfd_mips16_num_opcodes) | |
3363 | { | |
3364 | const char *name = mips16_opcodes[i].name; | |
3365 | ||
17a2f251 | 3366 | retval = hash_insert (mips16_op_hash, name, (void *) &mips16_opcodes[i]); |
252b5132 RH |
3367 | if (retval != NULL) |
3368 | as_fatal (_("internal: can't hash `%s': %s"), | |
3369 | mips16_opcodes[i].name, retval); | |
3370 | do | |
3371 | { | |
fc76e730 RS |
3372 | if (!validate_mips16_insn (&mips16_opcodes[i], &mips16_operands[i])) |
3373 | broken = 1; | |
1e915849 RS |
3374 | if (mips16_nop_insn.insn_mo == NULL && strcmp (name, "nop") == 0) |
3375 | { | |
3376 | create_insn (&mips16_nop_insn, mips16_opcodes + i); | |
3377 | mips16_nop_insn.fixed_p = 1; | |
3378 | } | |
252b5132 RH |
3379 | ++i; |
3380 | } | |
3381 | while (i < bfd_mips16_num_opcodes | |
3382 | && strcmp (mips16_opcodes[i].name, name) == 0); | |
3383 | } | |
3384 | ||
df58fc94 | 3385 | micromips_op_hash = hash_new (); |
fc76e730 RS |
3386 | micromips_operands = XCNEWVEC (struct mips_operand_array, |
3387 | bfd_micromips_num_opcodes); | |
df58fc94 RS |
3388 | |
3389 | i = 0; | |
3390 | while (i < bfd_micromips_num_opcodes) | |
3391 | { | |
3392 | const char *name = micromips_opcodes[i].name; | |
3393 | ||
3394 | retval = hash_insert (micromips_op_hash, name, | |
3395 | (void *) µmips_opcodes[i]); | |
3396 | if (retval != NULL) | |
3397 | as_fatal (_("internal: can't hash `%s': %s"), | |
3398 | micromips_opcodes[i].name, retval); | |
3399 | do | |
fc76e730 RS |
3400 | { |
3401 | struct mips_cl_insn *micromips_nop_insn; | |
3402 | ||
3403 | if (!validate_micromips_insn (µmips_opcodes[i], | |
3404 | µmips_operands[i])) | |
3405 | broken = 1; | |
3406 | ||
3407 | if (micromips_opcodes[i].pinfo != INSN_MACRO) | |
3408 | { | |
3409 | if (micromips_insn_length (micromips_opcodes + i) == 2) | |
3410 | micromips_nop_insn = µmips_nop16_insn; | |
3411 | else if (micromips_insn_length (micromips_opcodes + i) == 4) | |
3412 | micromips_nop_insn = µmips_nop32_insn; | |
3413 | else | |
3414 | continue; | |
3415 | ||
3416 | if (micromips_nop_insn->insn_mo == NULL | |
3417 | && strcmp (name, "nop") == 0) | |
3418 | { | |
3419 | create_insn (micromips_nop_insn, micromips_opcodes + i); | |
3420 | micromips_nop_insn->fixed_p = 1; | |
3421 | } | |
3422 | } | |
3423 | } | |
df58fc94 RS |
3424 | while (++i < bfd_micromips_num_opcodes |
3425 | && strcmp (micromips_opcodes[i].name, name) == 0); | |
3426 | } | |
3427 | ||
252b5132 | 3428 | if (broken) |
1661c76c | 3429 | as_fatal (_("broken assembler, no assembly attempted")); |
252b5132 RH |
3430 | |
3431 | /* We add all the general register names to the symbol table. This | |
3432 | helps us detect invalid uses of them. */ | |
707bfff6 TS |
3433 | for (i = 0; reg_names[i].name; i++) |
3434 | symbol_table_insert (symbol_new (reg_names[i].name, reg_section, | |
8fc4ee9b | 3435 | reg_names[i].num, /* & RNUM_MASK, */ |
707bfff6 TS |
3436 | &zero_address_frag)); |
3437 | if (HAVE_NEWABI) | |
3438 | for (i = 0; reg_names_n32n64[i].name; i++) | |
3439 | symbol_table_insert (symbol_new (reg_names_n32n64[i].name, reg_section, | |
8fc4ee9b | 3440 | reg_names_n32n64[i].num, /* & RNUM_MASK, */ |
252b5132 | 3441 | &zero_address_frag)); |
707bfff6 TS |
3442 | else |
3443 | for (i = 0; reg_names_o32[i].name; i++) | |
3444 | symbol_table_insert (symbol_new (reg_names_o32[i].name, reg_section, | |
8fc4ee9b | 3445 | reg_names_o32[i].num, /* & RNUM_MASK, */ |
6047c971 | 3446 | &zero_address_frag)); |
6047c971 | 3447 | |
14daeee3 RS |
3448 | for (i = 0; i < 32; i++) |
3449 | { | |
3450 | char regname[7]; | |
3451 | ||
3452 | /* R5900 VU0 floating-point register. */ | |
3453 | regname[sizeof (rename) - 1] = 0; | |
3454 | snprintf (regname, sizeof (regname) - 1, "$vf%d", i); | |
3455 | symbol_table_insert (symbol_new (regname, reg_section, | |
3456 | RTYPE_VF | i, &zero_address_frag)); | |
3457 | ||
3458 | /* R5900 VU0 integer register. */ | |
3459 | snprintf (regname, sizeof (regname) - 1, "$vi%d", i); | |
3460 | symbol_table_insert (symbol_new (regname, reg_section, | |
3461 | RTYPE_VI | i, &zero_address_frag)); | |
3462 | ||
3463 | } | |
3464 | ||
a92713e6 RS |
3465 | obstack_init (&mips_operand_tokens); |
3466 | ||
7d10b47d | 3467 | mips_no_prev_insn (); |
252b5132 RH |
3468 | |
3469 | mips_gprmask = 0; | |
3470 | mips_cprmask[0] = 0; | |
3471 | mips_cprmask[1] = 0; | |
3472 | mips_cprmask[2] = 0; | |
3473 | mips_cprmask[3] = 0; | |
3474 | ||
3475 | /* set the default alignment for the text section (2**2) */ | |
3476 | record_alignment (text_section, 2); | |
3477 | ||
4d0d148d | 3478 | bfd_set_gp_size (stdoutput, g_switch_value); |
252b5132 | 3479 | |
f3ded42a RS |
3480 | /* On a native system other than VxWorks, sections must be aligned |
3481 | to 16 byte boundaries. When configured for an embedded ELF | |
3482 | target, we don't bother. */ | |
3483 | if (strncmp (TARGET_OS, "elf", 3) != 0 | |
3484 | && strncmp (TARGET_OS, "vxworks", 7) != 0) | |
252b5132 | 3485 | { |
f3ded42a RS |
3486 | (void) bfd_set_section_alignment (stdoutput, text_section, 4); |
3487 | (void) bfd_set_section_alignment (stdoutput, data_section, 4); | |
3488 | (void) bfd_set_section_alignment (stdoutput, bss_section, 4); | |
3489 | } | |
252b5132 | 3490 | |
f3ded42a RS |
3491 | /* Create a .reginfo section for register masks and a .mdebug |
3492 | section for debugging information. */ | |
3493 | { | |
3494 | segT seg; | |
3495 | subsegT subseg; | |
3496 | flagword flags; | |
3497 | segT sec; | |
3498 | ||
3499 | seg = now_seg; | |
3500 | subseg = now_subseg; | |
3501 | ||
3502 | /* The ABI says this section should be loaded so that the | |
3503 | running program can access it. However, we don't load it | |
3504 | if we are configured for an embedded target */ | |
3505 | flags = SEC_READONLY | SEC_DATA; | |
3506 | if (strncmp (TARGET_OS, "elf", 3) != 0) | |
3507 | flags |= SEC_ALLOC | SEC_LOAD; | |
3508 | ||
3509 | if (mips_abi != N64_ABI) | |
252b5132 | 3510 | { |
f3ded42a | 3511 | sec = subseg_new (".reginfo", (subsegT) 0); |
bdaaa2e1 | 3512 | |
f3ded42a RS |
3513 | bfd_set_section_flags (stdoutput, sec, flags); |
3514 | bfd_set_section_alignment (stdoutput, sec, HAVE_NEWABI ? 3 : 2); | |
252b5132 | 3515 | |
f3ded42a RS |
3516 | mips_regmask_frag = frag_more (sizeof (Elf32_External_RegInfo)); |
3517 | } | |
3518 | else | |
3519 | { | |
3520 | /* The 64-bit ABI uses a .MIPS.options section rather than | |
3521 | .reginfo section. */ | |
3522 | sec = subseg_new (".MIPS.options", (subsegT) 0); | |
3523 | bfd_set_section_flags (stdoutput, sec, flags); | |
3524 | bfd_set_section_alignment (stdoutput, sec, 3); | |
252b5132 | 3525 | |
f3ded42a RS |
3526 | /* Set up the option header. */ |
3527 | { | |
3528 | Elf_Internal_Options opthdr; | |
3529 | char *f; | |
3530 | ||
3531 | opthdr.kind = ODK_REGINFO; | |
3532 | opthdr.size = (sizeof (Elf_External_Options) | |
3533 | + sizeof (Elf64_External_RegInfo)); | |
3534 | opthdr.section = 0; | |
3535 | opthdr.info = 0; | |
3536 | f = frag_more (sizeof (Elf_External_Options)); | |
3537 | bfd_mips_elf_swap_options_out (stdoutput, &opthdr, | |
3538 | (Elf_External_Options *) f); | |
3539 | ||
3540 | mips_regmask_frag = frag_more (sizeof (Elf64_External_RegInfo)); | |
3541 | } | |
3542 | } | |
252b5132 | 3543 | |
f3ded42a RS |
3544 | if (ECOFF_DEBUGGING) |
3545 | { | |
3546 | sec = subseg_new (".mdebug", (subsegT) 0); | |
3547 | (void) bfd_set_section_flags (stdoutput, sec, | |
3548 | SEC_HAS_CONTENTS | SEC_READONLY); | |
3549 | (void) bfd_set_section_alignment (stdoutput, sec, 2); | |
252b5132 | 3550 | } |
f3ded42a RS |
3551 | else if (mips_flag_pdr) |
3552 | { | |
3553 | pdr_seg = subseg_new (".pdr", (subsegT) 0); | |
3554 | (void) bfd_set_section_flags (stdoutput, pdr_seg, | |
3555 | SEC_READONLY | SEC_RELOC | |
3556 | | SEC_DEBUGGING); | |
3557 | (void) bfd_set_section_alignment (stdoutput, pdr_seg, 2); | |
3558 | } | |
3559 | ||
3560 | subseg_set (seg, subseg); | |
3561 | } | |
252b5132 RH |
3562 | |
3563 | if (! ECOFF_DEBUGGING) | |
3564 | md_obj_begin (); | |
71400594 RS |
3565 | |
3566 | if (mips_fix_vr4120) | |
3567 | init_vr4120_conflicts (); | |
252b5132 RH |
3568 | } |
3569 | ||
3570 | void | |
17a2f251 | 3571 | md_mips_end (void) |
252b5132 | 3572 | { |
02b1ab82 | 3573 | mips_emit_delays (); |
252b5132 RH |
3574 | if (! ECOFF_DEBUGGING) |
3575 | md_obj_end (); | |
3576 | } | |
3577 | ||
3578 | void | |
17a2f251 | 3579 | md_assemble (char *str) |
252b5132 RH |
3580 | { |
3581 | struct mips_cl_insn insn; | |
f6688943 TS |
3582 | bfd_reloc_code_real_type unused_reloc[3] |
3583 | = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED}; | |
252b5132 RH |
3584 | |
3585 | imm_expr.X_op = O_absent; | |
252b5132 | 3586 | offset_expr.X_op = O_absent; |
f6688943 TS |
3587 | offset_reloc[0] = BFD_RELOC_UNUSED; |
3588 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
3589 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
252b5132 | 3590 | |
e1b47bd5 RS |
3591 | mips_mark_labels (); |
3592 | mips_assembling_insn = TRUE; | |
e3de51ce | 3593 | clear_insn_error (); |
e1b47bd5 | 3594 | |
252b5132 RH |
3595 | if (mips_opts.mips16) |
3596 | mips16_ip (str, &insn); | |
3597 | else | |
3598 | { | |
3599 | mips_ip (str, &insn); | |
beae10d5 KH |
3600 | DBG ((_("returned from mips_ip(%s) insn_opcode = 0x%x\n"), |
3601 | str, insn.insn_opcode)); | |
252b5132 RH |
3602 | } |
3603 | ||
e3de51ce RS |
3604 | if (insn_error.msg) |
3605 | report_insn_error (str); | |
e1b47bd5 | 3606 | else if (insn.insn_mo->pinfo == INSN_MACRO) |
252b5132 | 3607 | { |
584892a6 | 3608 | macro_start (); |
252b5132 RH |
3609 | if (mips_opts.mips16) |
3610 | mips16_macro (&insn); | |
3611 | else | |
833794fc | 3612 | macro (&insn, str); |
584892a6 | 3613 | macro_end (); |
252b5132 RH |
3614 | } |
3615 | else | |
3616 | { | |
77bd4346 | 3617 | if (offset_expr.X_op != O_absent) |
df58fc94 | 3618 | append_insn (&insn, &offset_expr, offset_reloc, FALSE); |
252b5132 | 3619 | else |
df58fc94 | 3620 | append_insn (&insn, NULL, unused_reloc, FALSE); |
252b5132 | 3621 | } |
e1b47bd5 RS |
3622 | |
3623 | mips_assembling_insn = FALSE; | |
252b5132 RH |
3624 | } |
3625 | ||
738e5348 RS |
3626 | /* Convenience functions for abstracting away the differences between |
3627 | MIPS16 and non-MIPS16 relocations. */ | |
3628 | ||
3629 | static inline bfd_boolean | |
3630 | mips16_reloc_p (bfd_reloc_code_real_type reloc) | |
3631 | { | |
3632 | switch (reloc) | |
3633 | { | |
3634 | case BFD_RELOC_MIPS16_JMP: | |
3635 | case BFD_RELOC_MIPS16_GPREL: | |
3636 | case BFD_RELOC_MIPS16_GOT16: | |
3637 | case BFD_RELOC_MIPS16_CALL16: | |
3638 | case BFD_RELOC_MIPS16_HI16_S: | |
3639 | case BFD_RELOC_MIPS16_HI16: | |
3640 | case BFD_RELOC_MIPS16_LO16: | |
3641 | return TRUE; | |
3642 | ||
3643 | default: | |
3644 | return FALSE; | |
3645 | } | |
3646 | } | |
3647 | ||
df58fc94 RS |
3648 | static inline bfd_boolean |
3649 | micromips_reloc_p (bfd_reloc_code_real_type reloc) | |
3650 | { | |
3651 | switch (reloc) | |
3652 | { | |
3653 | case BFD_RELOC_MICROMIPS_7_PCREL_S1: | |
3654 | case BFD_RELOC_MICROMIPS_10_PCREL_S1: | |
3655 | case BFD_RELOC_MICROMIPS_16_PCREL_S1: | |
3656 | case BFD_RELOC_MICROMIPS_GPREL16: | |
3657 | case BFD_RELOC_MICROMIPS_JMP: | |
3658 | case BFD_RELOC_MICROMIPS_HI16: | |
3659 | case BFD_RELOC_MICROMIPS_HI16_S: | |
3660 | case BFD_RELOC_MICROMIPS_LO16: | |
3661 | case BFD_RELOC_MICROMIPS_LITERAL: | |
3662 | case BFD_RELOC_MICROMIPS_GOT16: | |
3663 | case BFD_RELOC_MICROMIPS_CALL16: | |
3664 | case BFD_RELOC_MICROMIPS_GOT_HI16: | |
3665 | case BFD_RELOC_MICROMIPS_GOT_LO16: | |
3666 | case BFD_RELOC_MICROMIPS_CALL_HI16: | |
3667 | case BFD_RELOC_MICROMIPS_CALL_LO16: | |
3668 | case BFD_RELOC_MICROMIPS_SUB: | |
3669 | case BFD_RELOC_MICROMIPS_GOT_PAGE: | |
3670 | case BFD_RELOC_MICROMIPS_GOT_OFST: | |
3671 | case BFD_RELOC_MICROMIPS_GOT_DISP: | |
3672 | case BFD_RELOC_MICROMIPS_HIGHEST: | |
3673 | case BFD_RELOC_MICROMIPS_HIGHER: | |
3674 | case BFD_RELOC_MICROMIPS_SCN_DISP: | |
3675 | case BFD_RELOC_MICROMIPS_JALR: | |
3676 | return TRUE; | |
3677 | ||
3678 | default: | |
3679 | return FALSE; | |
3680 | } | |
3681 | } | |
3682 | ||
2309ddf2 MR |
3683 | static inline bfd_boolean |
3684 | jmp_reloc_p (bfd_reloc_code_real_type reloc) | |
3685 | { | |
3686 | return reloc == BFD_RELOC_MIPS_JMP || reloc == BFD_RELOC_MICROMIPS_JMP; | |
3687 | } | |
3688 | ||
738e5348 RS |
3689 | static inline bfd_boolean |
3690 | got16_reloc_p (bfd_reloc_code_real_type reloc) | |
3691 | { | |
2309ddf2 | 3692 | return (reloc == BFD_RELOC_MIPS_GOT16 || reloc == BFD_RELOC_MIPS16_GOT16 |
df58fc94 | 3693 | || reloc == BFD_RELOC_MICROMIPS_GOT16); |
738e5348 RS |
3694 | } |
3695 | ||
3696 | static inline bfd_boolean | |
3697 | hi16_reloc_p (bfd_reloc_code_real_type reloc) | |
3698 | { | |
2309ddf2 | 3699 | return (reloc == BFD_RELOC_HI16_S || reloc == BFD_RELOC_MIPS16_HI16_S |
df58fc94 | 3700 | || reloc == BFD_RELOC_MICROMIPS_HI16_S); |
738e5348 RS |
3701 | } |
3702 | ||
3703 | static inline bfd_boolean | |
3704 | lo16_reloc_p (bfd_reloc_code_real_type reloc) | |
3705 | { | |
2309ddf2 | 3706 | return (reloc == BFD_RELOC_LO16 || reloc == BFD_RELOC_MIPS16_LO16 |
df58fc94 RS |
3707 | || reloc == BFD_RELOC_MICROMIPS_LO16); |
3708 | } | |
3709 | ||
df58fc94 RS |
3710 | static inline bfd_boolean |
3711 | jalr_reloc_p (bfd_reloc_code_real_type reloc) | |
3712 | { | |
2309ddf2 | 3713 | return reloc == BFD_RELOC_MIPS_JALR || reloc == BFD_RELOC_MICROMIPS_JALR; |
738e5348 RS |
3714 | } |
3715 | ||
f2ae14a1 RS |
3716 | static inline bfd_boolean |
3717 | gprel16_reloc_p (bfd_reloc_code_real_type reloc) | |
3718 | { | |
3719 | return (reloc == BFD_RELOC_GPREL16 || reloc == BFD_RELOC_MIPS16_GPREL | |
3720 | || reloc == BFD_RELOC_MICROMIPS_GPREL16); | |
3721 | } | |
3722 | ||
2de39019 CM |
3723 | /* Return true if RELOC is a PC-relative relocation that does not have |
3724 | full address range. */ | |
3725 | ||
3726 | static inline bfd_boolean | |
3727 | limited_pcrel_reloc_p (bfd_reloc_code_real_type reloc) | |
3728 | { | |
3729 | switch (reloc) | |
3730 | { | |
3731 | case BFD_RELOC_16_PCREL_S2: | |
3732 | case BFD_RELOC_MICROMIPS_7_PCREL_S1: | |
3733 | case BFD_RELOC_MICROMIPS_10_PCREL_S1: | |
3734 | case BFD_RELOC_MICROMIPS_16_PCREL_S1: | |
3735 | return TRUE; | |
3736 | ||
b47468a6 CM |
3737 | case BFD_RELOC_32_PCREL: |
3738 | return HAVE_64BIT_ADDRESSES; | |
3739 | ||
2de39019 CM |
3740 | default: |
3741 | return FALSE; | |
3742 | } | |
3743 | } | |
b47468a6 | 3744 | |
5919d012 | 3745 | /* Return true if the given relocation might need a matching %lo(). |
0a44bf69 RS |
3746 | This is only "might" because SVR4 R_MIPS_GOT16 relocations only |
3747 | need a matching %lo() when applied to local symbols. */ | |
5919d012 RS |
3748 | |
3749 | static inline bfd_boolean | |
17a2f251 | 3750 | reloc_needs_lo_p (bfd_reloc_code_real_type reloc) |
5919d012 | 3751 | { |
3b91255e | 3752 | return (HAVE_IN_PLACE_ADDENDS |
738e5348 | 3753 | && (hi16_reloc_p (reloc) |
0a44bf69 RS |
3754 | /* VxWorks R_MIPS_GOT16 relocs never need a matching %lo(); |
3755 | all GOT16 relocations evaluate to "G". */ | |
738e5348 RS |
3756 | || (got16_reloc_p (reloc) && mips_pic != VXWORKS_PIC))); |
3757 | } | |
3758 | ||
3759 | /* Return the type of %lo() reloc needed by RELOC, given that | |
3760 | reloc_needs_lo_p. */ | |
3761 | ||
3762 | static inline bfd_reloc_code_real_type | |
3763 | matching_lo_reloc (bfd_reloc_code_real_type reloc) | |
3764 | { | |
df58fc94 RS |
3765 | return (mips16_reloc_p (reloc) ? BFD_RELOC_MIPS16_LO16 |
3766 | : (micromips_reloc_p (reloc) ? BFD_RELOC_MICROMIPS_LO16 | |
3767 | : BFD_RELOC_LO16)); | |
5919d012 RS |
3768 | } |
3769 | ||
3770 | /* Return true if the given fixup is followed by a matching R_MIPS_LO16 | |
3771 | relocation. */ | |
3772 | ||
3773 | static inline bfd_boolean | |
17a2f251 | 3774 | fixup_has_matching_lo_p (fixS *fixp) |
5919d012 RS |
3775 | { |
3776 | return (fixp->fx_next != NULL | |
738e5348 | 3777 | && fixp->fx_next->fx_r_type == matching_lo_reloc (fixp->fx_r_type) |
5919d012 RS |
3778 | && fixp->fx_addsy == fixp->fx_next->fx_addsy |
3779 | && fixp->fx_offset == fixp->fx_next->fx_offset); | |
3780 | } | |
3781 | ||
462427c4 RS |
3782 | /* Move all labels in LABELS to the current insertion point. TEXT_P |
3783 | says whether the labels refer to text or data. */ | |
404a8071 RS |
3784 | |
3785 | static void | |
462427c4 | 3786 | mips_move_labels (struct insn_label_list *labels, bfd_boolean text_p) |
404a8071 RS |
3787 | { |
3788 | struct insn_label_list *l; | |
3789 | valueT val; | |
3790 | ||
462427c4 | 3791 | for (l = labels; l != NULL; l = l->next) |
404a8071 | 3792 | { |
9c2799c2 | 3793 | gas_assert (S_GET_SEGMENT (l->label) == now_seg); |
404a8071 RS |
3794 | symbol_set_frag (l->label, frag_now); |
3795 | val = (valueT) frag_now_fix (); | |
df58fc94 | 3796 | /* MIPS16/microMIPS text labels are stored as odd. */ |
462427c4 | 3797 | if (text_p && HAVE_CODE_COMPRESSION) |
404a8071 RS |
3798 | ++val; |
3799 | S_SET_VALUE (l->label, val); | |
3800 | } | |
3801 | } | |
3802 | ||
462427c4 RS |
3803 | /* Move all labels in insn_labels to the current insertion point |
3804 | and treat them as text labels. */ | |
3805 | ||
3806 | static void | |
3807 | mips_move_text_labels (void) | |
3808 | { | |
3809 | mips_move_labels (seg_info (now_seg)->label_list, TRUE); | |
3810 | } | |
3811 | ||
5f0fe04b TS |
3812 | static bfd_boolean |
3813 | s_is_linkonce (symbolS *sym, segT from_seg) | |
3814 | { | |
3815 | bfd_boolean linkonce = FALSE; | |
3816 | segT symseg = S_GET_SEGMENT (sym); | |
3817 | ||
3818 | if (symseg != from_seg && !S_IS_LOCAL (sym)) | |
3819 | { | |
3820 | if ((bfd_get_section_flags (stdoutput, symseg) & SEC_LINK_ONCE)) | |
3821 | linkonce = TRUE; | |
5f0fe04b TS |
3822 | /* The GNU toolchain uses an extension for ELF: a section |
3823 | beginning with the magic string .gnu.linkonce is a | |
3824 | linkonce section. */ | |
3825 | if (strncmp (segment_name (symseg), ".gnu.linkonce", | |
3826 | sizeof ".gnu.linkonce" - 1) == 0) | |
3827 | linkonce = TRUE; | |
5f0fe04b TS |
3828 | } |
3829 | return linkonce; | |
3830 | } | |
3831 | ||
e1b47bd5 | 3832 | /* Mark MIPS16 or microMIPS instruction label LABEL. This permits the |
df58fc94 RS |
3833 | linker to handle them specially, such as generating jalx instructions |
3834 | when needed. We also make them odd for the duration of the assembly, | |
3835 | in order to generate the right sort of code. We will make them even | |
252b5132 RH |
3836 | in the adjust_symtab routine, while leaving them marked. This is |
3837 | convenient for the debugger and the disassembler. The linker knows | |
3838 | to make them odd again. */ | |
3839 | ||
3840 | static void | |
e1b47bd5 | 3841 | mips_compressed_mark_label (symbolS *label) |
252b5132 | 3842 | { |
df58fc94 | 3843 | gas_assert (HAVE_CODE_COMPRESSION); |
a8dbcb85 | 3844 | |
f3ded42a RS |
3845 | if (mips_opts.mips16) |
3846 | S_SET_OTHER (label, ELF_ST_SET_MIPS16 (S_GET_OTHER (label))); | |
3847 | else | |
3848 | S_SET_OTHER (label, ELF_ST_SET_MICROMIPS (S_GET_OTHER (label))); | |
e1b47bd5 RS |
3849 | if ((S_GET_VALUE (label) & 1) == 0 |
3850 | /* Don't adjust the address if the label is global or weak, or | |
3851 | in a link-once section, since we'll be emitting symbol reloc | |
3852 | references to it which will be patched up by the linker, and | |
3853 | the final value of the symbol may or may not be MIPS16/microMIPS. */ | |
3854 | && !S_IS_WEAK (label) | |
3855 | && !S_IS_EXTERNAL (label) | |
3856 | && !s_is_linkonce (label, now_seg)) | |
3857 | S_SET_VALUE (label, S_GET_VALUE (label) | 1); | |
3858 | } | |
3859 | ||
3860 | /* Mark preceding MIPS16 or microMIPS instruction labels. */ | |
3861 | ||
3862 | static void | |
3863 | mips_compressed_mark_labels (void) | |
3864 | { | |
3865 | struct insn_label_list *l; | |
3866 | ||
3867 | for (l = seg_info (now_seg)->label_list; l != NULL; l = l->next) | |
3868 | mips_compressed_mark_label (l->label); | |
252b5132 RH |
3869 | } |
3870 | ||
4d7206a2 RS |
3871 | /* End the current frag. Make it a variant frag and record the |
3872 | relaxation info. */ | |
3873 | ||
3874 | static void | |
3875 | relax_close_frag (void) | |
3876 | { | |
584892a6 | 3877 | mips_macro_warning.first_frag = frag_now; |
4d7206a2 | 3878 | frag_var (rs_machine_dependent, 0, 0, |
584892a6 | 3879 | RELAX_ENCODE (mips_relax.sizes[0], mips_relax.sizes[1]), |
4d7206a2 RS |
3880 | mips_relax.symbol, 0, (char *) mips_relax.first_fixup); |
3881 | ||
3882 | memset (&mips_relax.sizes, 0, sizeof (mips_relax.sizes)); | |
3883 | mips_relax.first_fixup = 0; | |
3884 | } | |
3885 | ||
3886 | /* Start a new relaxation sequence whose expansion depends on SYMBOL. | |
3887 | See the comment above RELAX_ENCODE for more details. */ | |
3888 | ||
3889 | static void | |
3890 | relax_start (symbolS *symbol) | |
3891 | { | |
9c2799c2 | 3892 | gas_assert (mips_relax.sequence == 0); |
4d7206a2 RS |
3893 | mips_relax.sequence = 1; |
3894 | mips_relax.symbol = symbol; | |
3895 | } | |
3896 | ||
3897 | /* Start generating the second version of a relaxable sequence. | |
3898 | See the comment above RELAX_ENCODE for more details. */ | |
252b5132 RH |
3899 | |
3900 | static void | |
4d7206a2 RS |
3901 | relax_switch (void) |
3902 | { | |
9c2799c2 | 3903 | gas_assert (mips_relax.sequence == 1); |
4d7206a2 RS |
3904 | mips_relax.sequence = 2; |
3905 | } | |
3906 | ||
3907 | /* End the current relaxable sequence. */ | |
3908 | ||
3909 | static void | |
3910 | relax_end (void) | |
3911 | { | |
9c2799c2 | 3912 | gas_assert (mips_relax.sequence == 2); |
4d7206a2 RS |
3913 | relax_close_frag (); |
3914 | mips_relax.sequence = 0; | |
3915 | } | |
3916 | ||
11625dd8 RS |
3917 | /* Return true if IP is a delayed branch or jump. */ |
3918 | ||
3919 | static inline bfd_boolean | |
3920 | delayed_branch_p (const struct mips_cl_insn *ip) | |
3921 | { | |
3922 | return (ip->insn_mo->pinfo & (INSN_UNCOND_BRANCH_DELAY | |
3923 | | INSN_COND_BRANCH_DELAY | |
3924 | | INSN_COND_BRANCH_LIKELY)) != 0; | |
3925 | } | |
3926 | ||
3927 | /* Return true if IP is a compact branch or jump. */ | |
3928 | ||
3929 | static inline bfd_boolean | |
3930 | compact_branch_p (const struct mips_cl_insn *ip) | |
3931 | { | |
26545944 RS |
3932 | return (ip->insn_mo->pinfo2 & (INSN2_UNCOND_BRANCH |
3933 | | INSN2_COND_BRANCH)) != 0; | |
11625dd8 RS |
3934 | } |
3935 | ||
3936 | /* Return true if IP is an unconditional branch or jump. */ | |
3937 | ||
3938 | static inline bfd_boolean | |
3939 | uncond_branch_p (const struct mips_cl_insn *ip) | |
3940 | { | |
3941 | return ((ip->insn_mo->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0 | |
26545944 | 3942 | || (ip->insn_mo->pinfo2 & INSN2_UNCOND_BRANCH) != 0); |
11625dd8 RS |
3943 | } |
3944 | ||
3945 | /* Return true if IP is a branch-likely instruction. */ | |
3946 | ||
3947 | static inline bfd_boolean | |
3948 | branch_likely_p (const struct mips_cl_insn *ip) | |
3949 | { | |
3950 | return (ip->insn_mo->pinfo & INSN_COND_BRANCH_LIKELY) != 0; | |
3951 | } | |
3952 | ||
14fe068b RS |
3953 | /* Return the type of nop that should be used to fill the delay slot |
3954 | of delayed branch IP. */ | |
3955 | ||
3956 | static struct mips_cl_insn * | |
3957 | get_delay_slot_nop (const struct mips_cl_insn *ip) | |
3958 | { | |
3959 | if (mips_opts.micromips | |
3960 | && (ip->insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT)) | |
3961 | return µmips_nop32_insn; | |
3962 | return NOP_INSN; | |
3963 | } | |
3964 | ||
fc76e730 RS |
3965 | /* Return a mask that has bit N set if OPCODE reads the register(s) |
3966 | in operand N. */ | |
df58fc94 RS |
3967 | |
3968 | static unsigned int | |
fc76e730 | 3969 | insn_read_mask (const struct mips_opcode *opcode) |
df58fc94 | 3970 | { |
fc76e730 RS |
3971 | return (opcode->pinfo & INSN_READ_ALL) >> INSN_READ_SHIFT; |
3972 | } | |
df58fc94 | 3973 | |
fc76e730 RS |
3974 | /* Return a mask that has bit N set if OPCODE writes to the register(s) |
3975 | in operand N. */ | |
3976 | ||
3977 | static unsigned int | |
3978 | insn_write_mask (const struct mips_opcode *opcode) | |
3979 | { | |
3980 | return (opcode->pinfo & INSN_WRITE_ALL) >> INSN_WRITE_SHIFT; | |
3981 | } | |
3982 | ||
3983 | /* Return a mask of the registers specified by operand OPERAND of INSN. | |
3984 | Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK | |
3985 | is set. */ | |
3986 | ||
3987 | static unsigned int | |
3988 | operand_reg_mask (const struct mips_cl_insn *insn, | |
3989 | const struct mips_operand *operand, | |
3990 | unsigned int type_mask) | |
3991 | { | |
3992 | unsigned int uval, vsel; | |
3993 | ||
3994 | switch (operand->type) | |
df58fc94 | 3995 | { |
fc76e730 RS |
3996 | case OP_INT: |
3997 | case OP_MAPPED_INT: | |
3998 | case OP_MSB: | |
3999 | case OP_PCREL: | |
4000 | case OP_PERF_REG: | |
4001 | case OP_ADDIUSP_INT: | |
4002 | case OP_ENTRY_EXIT_LIST: | |
4003 | case OP_REPEAT_DEST_REG: | |
4004 | case OP_REPEAT_PREV_REG: | |
4005 | case OP_PC: | |
14daeee3 RS |
4006 | case OP_VU0_SUFFIX: |
4007 | case OP_VU0_MATCH_SUFFIX: | |
fc76e730 RS |
4008 | abort (); |
4009 | ||
4010 | case OP_REG: | |
0f35dbc4 | 4011 | case OP_OPTIONAL_REG: |
fc76e730 RS |
4012 | { |
4013 | const struct mips_reg_operand *reg_op; | |
4014 | ||
4015 | reg_op = (const struct mips_reg_operand *) operand; | |
4016 | if (!(type_mask & (1 << reg_op->reg_type))) | |
4017 | return 0; | |
4018 | uval = insn_extract_operand (insn, operand); | |
4019 | return 1 << mips_decode_reg_operand (reg_op, uval); | |
4020 | } | |
4021 | ||
4022 | case OP_REG_PAIR: | |
4023 | { | |
4024 | const struct mips_reg_pair_operand *pair_op; | |
4025 | ||
4026 | pair_op = (const struct mips_reg_pair_operand *) operand; | |
4027 | if (!(type_mask & (1 << pair_op->reg_type))) | |
4028 | return 0; | |
4029 | uval = insn_extract_operand (insn, operand); | |
4030 | return (1 << pair_op->reg1_map[uval]) | (1 << pair_op->reg2_map[uval]); | |
4031 | } | |
4032 | ||
4033 | case OP_CLO_CLZ_DEST: | |
4034 | if (!(type_mask & (1 << OP_REG_GP))) | |
4035 | return 0; | |
4036 | uval = insn_extract_operand (insn, operand); | |
4037 | return (1 << (uval & 31)) | (1 << (uval >> 5)); | |
4038 | ||
4039 | case OP_LWM_SWM_LIST: | |
4040 | abort (); | |
4041 | ||
4042 | case OP_SAVE_RESTORE_LIST: | |
4043 | abort (); | |
4044 | ||
4045 | case OP_MDMX_IMM_REG: | |
4046 | if (!(type_mask & (1 << OP_REG_VEC))) | |
4047 | return 0; | |
4048 | uval = insn_extract_operand (insn, operand); | |
4049 | vsel = uval >> 5; | |
4050 | if ((vsel & 0x18) == 0x18) | |
4051 | return 0; | |
4052 | return 1 << (uval & 31); | |
df58fc94 | 4053 | } |
fc76e730 RS |
4054 | abort (); |
4055 | } | |
4056 | ||
4057 | /* Return a mask of the registers specified by operands OPNO_MASK of INSN, | |
4058 | where bit N of OPNO_MASK is set if operand N should be included. | |
4059 | Ignore registers of type OP_REG_<t> unless bit OP_REG_<t> of TYPE_MASK | |
4060 | is set. */ | |
4061 | ||
4062 | static unsigned int | |
4063 | insn_reg_mask (const struct mips_cl_insn *insn, | |
4064 | unsigned int type_mask, unsigned int opno_mask) | |
4065 | { | |
4066 | unsigned int opno, reg_mask; | |
4067 | ||
4068 | opno = 0; | |
4069 | reg_mask = 0; | |
4070 | while (opno_mask != 0) | |
4071 | { | |
4072 | if (opno_mask & 1) | |
4073 | reg_mask |= operand_reg_mask (insn, insn_opno (insn, opno), type_mask); | |
4074 | opno_mask >>= 1; | |
4075 | opno += 1; | |
4076 | } | |
4077 | return reg_mask; | |
df58fc94 RS |
4078 | } |
4079 | ||
4c260379 RS |
4080 | /* Return the mask of core registers that IP reads. */ |
4081 | ||
4082 | static unsigned int | |
4083 | gpr_read_mask (const struct mips_cl_insn *ip) | |
4084 | { | |
4085 | unsigned long pinfo, pinfo2; | |
4086 | unsigned int mask; | |
4087 | ||
fc76e730 | 4088 | mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_read_mask (ip->insn_mo)); |
4c260379 RS |
4089 | pinfo = ip->insn_mo->pinfo; |
4090 | pinfo2 = ip->insn_mo->pinfo2; | |
fc76e730 | 4091 | if (pinfo & INSN_UDI) |
4c260379 | 4092 | { |
fc76e730 RS |
4093 | /* UDI instructions have traditionally been assumed to read RS |
4094 | and RT. */ | |
4095 | mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RT, *ip); | |
4096 | mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RS, *ip); | |
4c260379 | 4097 | } |
fc76e730 RS |
4098 | if (pinfo & INSN_READ_GPR_24) |
4099 | mask |= 1 << 24; | |
4100 | if (pinfo2 & INSN2_READ_GPR_16) | |
4101 | mask |= 1 << 16; | |
4102 | if (pinfo2 & INSN2_READ_SP) | |
4103 | mask |= 1 << SP; | |
26545944 | 4104 | if (pinfo2 & INSN2_READ_GPR_31) |
fc76e730 | 4105 | mask |= 1 << 31; |
fe35f09f RS |
4106 | /* Don't include register 0. */ |
4107 | return mask & ~1; | |
4c260379 RS |
4108 | } |
4109 | ||
4110 | /* Return the mask of core registers that IP writes. */ | |
4111 | ||
4112 | static unsigned int | |
4113 | gpr_write_mask (const struct mips_cl_insn *ip) | |
4114 | { | |
4115 | unsigned long pinfo, pinfo2; | |
4116 | unsigned int mask; | |
4117 | ||
fc76e730 | 4118 | mask = insn_reg_mask (ip, 1 << OP_REG_GP, insn_write_mask (ip->insn_mo)); |
4c260379 RS |
4119 | pinfo = ip->insn_mo->pinfo; |
4120 | pinfo2 = ip->insn_mo->pinfo2; | |
fc76e730 RS |
4121 | if (pinfo & INSN_WRITE_GPR_24) |
4122 | mask |= 1 << 24; | |
4123 | if (pinfo & INSN_WRITE_GPR_31) | |
4124 | mask |= 1 << 31; | |
4125 | if (pinfo & INSN_UDI) | |
4126 | /* UDI instructions have traditionally been assumed to write to RD. */ | |
4127 | mask |= 1 << EXTRACT_OPERAND (mips_opts.micromips, RD, *ip); | |
4128 | if (pinfo2 & INSN2_WRITE_SP) | |
4129 | mask |= 1 << SP; | |
fe35f09f RS |
4130 | /* Don't include register 0. */ |
4131 | return mask & ~1; | |
4c260379 RS |
4132 | } |
4133 | ||
4134 | /* Return the mask of floating-point registers that IP reads. */ | |
4135 | ||
4136 | static unsigned int | |
4137 | fpr_read_mask (const struct mips_cl_insn *ip) | |
4138 | { | |
fc76e730 | 4139 | unsigned long pinfo; |
4c260379 RS |
4140 | unsigned int mask; |
4141 | ||
fc76e730 RS |
4142 | mask = insn_reg_mask (ip, (1 << OP_REG_FP) | (1 << OP_REG_VEC), |
4143 | insn_read_mask (ip->insn_mo)); | |
4c260379 | 4144 | pinfo = ip->insn_mo->pinfo; |
4c260379 RS |
4145 | /* Conservatively treat all operands to an FP_D instruction are doubles. |
4146 | (This is overly pessimistic for things like cvt.d.s.) */ | |
4147 | if (HAVE_32BIT_FPRS && (pinfo & FP_D)) | |
4148 | mask |= mask << 1; | |
4149 | return mask; | |
4150 | } | |
4151 | ||
4152 | /* Return the mask of floating-point registers that IP writes. */ | |
4153 | ||
4154 | static unsigned int | |
4155 | fpr_write_mask (const struct mips_cl_insn *ip) | |
4156 | { | |
fc76e730 | 4157 | unsigned long pinfo; |
4c260379 RS |
4158 | unsigned int mask; |
4159 | ||
fc76e730 RS |
4160 | mask = insn_reg_mask (ip, (1 << OP_REG_FP) | (1 << OP_REG_VEC), |
4161 | insn_write_mask (ip->insn_mo)); | |
4c260379 | 4162 | pinfo = ip->insn_mo->pinfo; |
4c260379 RS |
4163 | /* Conservatively treat all operands to an FP_D instruction are doubles. |
4164 | (This is overly pessimistic for things like cvt.s.d.) */ | |
4165 | if (HAVE_32BIT_FPRS && (pinfo & FP_D)) | |
4166 | mask |= mask << 1; | |
4167 | return mask; | |
4168 | } | |
4169 | ||
a1d78564 RS |
4170 | /* Operand OPNUM of INSN is an odd-numbered floating-point register. |
4171 | Check whether that is allowed. */ | |
4172 | ||
4173 | static bfd_boolean | |
4174 | mips_oddfpreg_ok (const struct mips_opcode *insn, int opnum) | |
4175 | { | |
4176 | const char *s = insn->name; | |
4177 | ||
4178 | if (insn->pinfo == INSN_MACRO) | |
4179 | /* Let a macro pass, we'll catch it later when it is expanded. */ | |
4180 | return TRUE; | |
4181 | ||
4182 | if (ISA_HAS_ODD_SINGLE_FPR (mips_opts.isa) || mips_opts.arch == CPU_R5900) | |
4183 | { | |
4184 | /* Allow odd registers for single-precision ops. */ | |
4185 | switch (insn->pinfo & (FP_S | FP_D)) | |
4186 | { | |
4187 | case FP_S: | |
4188 | case 0: | |
4189 | return TRUE; | |
4190 | case FP_D: | |
4191 | return FALSE; | |
4192 | default: | |
4193 | break; | |
4194 | } | |
4195 | ||
4196 | /* Cvt.w.x and cvt.x.w allow an odd register for a 'w' or 's' operand. */ | |
4197 | s = strchr (insn->name, '.'); | |
4198 | if (s != NULL && opnum == 2) | |
4199 | s = strchr (s + 1, '.'); | |
4200 | return (s != NULL && (s[1] == 'w' || s[1] == 's')); | |
4201 | } | |
4202 | ||
4203 | /* Single-precision coprocessor loads and moves are OK too. */ | |
4204 | if ((insn->pinfo & FP_S) | |
4205 | && (insn->pinfo & (INSN_COPROC_MEMORY_DELAY | INSN_STORE_MEMORY | |
4206 | | INSN_LOAD_COPROC_DELAY | INSN_COPROC_MOVE_DELAY))) | |
4207 | return TRUE; | |
4208 | ||
4209 | return FALSE; | |
4210 | } | |
4211 | ||
a1d78564 RS |
4212 | /* Information about an instruction argument that we're trying to match. */ |
4213 | struct mips_arg_info | |
4214 | { | |
4215 | /* The instruction so far. */ | |
4216 | struct mips_cl_insn *insn; | |
4217 | ||
a92713e6 RS |
4218 | /* The first unconsumed operand token. */ |
4219 | struct mips_operand_token *token; | |
4220 | ||
a1d78564 RS |
4221 | /* The 1-based operand number, in terms of insn->insn_mo->args. */ |
4222 | int opnum; | |
4223 | ||
4224 | /* The 1-based argument number, for error reporting. This does not | |
4225 | count elided optional registers, etc.. */ | |
4226 | int argnum; | |
4227 | ||
4228 | /* The last OP_REG operand seen, or ILLEGAL_REG if none. */ | |
4229 | unsigned int last_regno; | |
4230 | ||
4231 | /* If the first operand was an OP_REG, this is the register that it | |
4232 | specified, otherwise it is ILLEGAL_REG. */ | |
4233 | unsigned int dest_regno; | |
4234 | ||
4235 | /* The value of the last OP_INT operand. Only used for OP_MSB, | |
4236 | where it gives the lsb position. */ | |
4237 | unsigned int last_op_int; | |
4238 | ||
60f20e8b RS |
4239 | /* If true, match routines should assume that no later instruction |
4240 | alternative matches and should therefore be as accomodating as | |
4241 | possible. Match routines should not report errors if something | |
4242 | is only invalid for !LAX_MATCH. */ | |
4243 | bfd_boolean lax_match; | |
a1d78564 | 4244 | |
a1d78564 RS |
4245 | /* True if a reference to the current AT register was seen. */ |
4246 | bfd_boolean seen_at; | |
4247 | }; | |
4248 | ||
1a00e612 RS |
4249 | /* Record that the argument is out of range. */ |
4250 | ||
4251 | static void | |
4252 | match_out_of_range (struct mips_arg_info *arg) | |
4253 | { | |
4254 | set_insn_error_i (arg->argnum, _("operand %d out of range"), arg->argnum); | |
4255 | } | |
4256 | ||
4257 | /* Record that the argument isn't constant but needs to be. */ | |
4258 | ||
4259 | static void | |
4260 | match_not_constant (struct mips_arg_info *arg) | |
4261 | { | |
4262 | set_insn_error_i (arg->argnum, _("operand %d must be constant"), | |
4263 | arg->argnum); | |
4264 | } | |
4265 | ||
a92713e6 RS |
4266 | /* Try to match an OT_CHAR token for character CH. Consume the token |
4267 | and return true on success, otherwise return false. */ | |
a1d78564 | 4268 | |
a92713e6 RS |
4269 | static bfd_boolean |
4270 | match_char (struct mips_arg_info *arg, char ch) | |
a1d78564 | 4271 | { |
a92713e6 RS |
4272 | if (arg->token->type == OT_CHAR && arg->token->u.ch == ch) |
4273 | { | |
4274 | ++arg->token; | |
4275 | if (ch == ',') | |
4276 | arg->argnum += 1; | |
4277 | return TRUE; | |
4278 | } | |
4279 | return FALSE; | |
4280 | } | |
a1d78564 | 4281 | |
a92713e6 RS |
4282 | /* Try to get an expression from the next tokens in ARG. Consume the |
4283 | tokens and return true on success, storing the expression value in | |
4284 | VALUE and relocation types in R. */ | |
4285 | ||
4286 | static bfd_boolean | |
4287 | match_expression (struct mips_arg_info *arg, expressionS *value, | |
4288 | bfd_reloc_code_real_type *r) | |
4289 | { | |
d436c1c2 RS |
4290 | /* If the next token is a '(' that was parsed as being part of a base |
4291 | expression, assume we have an elided offset. The later match will fail | |
4292 | if this turns out to be wrong. */ | |
4293 | if (arg->token->type == OT_CHAR && arg->token->u.ch == '(') | |
a1d78564 | 4294 | { |
d436c1c2 RS |
4295 | value->X_op = O_constant; |
4296 | value->X_add_number = 0; | |
4297 | r[0] = r[1] = r[2] = BFD_RELOC_UNUSED; | |
a92713e6 RS |
4298 | return TRUE; |
4299 | } | |
4300 | ||
d436c1c2 RS |
4301 | /* Reject register-based expressions such as "0+$2" and "(($2))". |
4302 | For plain registers the default error seems more appropriate. */ | |
4303 | if (arg->token->type == OT_INTEGER | |
4304 | && arg->token->u.integer.value.X_op == O_register) | |
a92713e6 | 4305 | { |
d436c1c2 RS |
4306 | set_insn_error (arg->argnum, _("register value used as expression")); |
4307 | return FALSE; | |
a1d78564 | 4308 | } |
d436c1c2 RS |
4309 | |
4310 | if (arg->token->type == OT_INTEGER) | |
a92713e6 | 4311 | { |
d436c1c2 RS |
4312 | *value = arg->token->u.integer.value; |
4313 | memcpy (r, arg->token->u.integer.relocs, 3 * sizeof (*r)); | |
4314 | ++arg->token; | |
4315 | return TRUE; | |
a92713e6 | 4316 | } |
a92713e6 | 4317 | |
d436c1c2 RS |
4318 | set_insn_error_i |
4319 | (arg->argnum, _("operand %d must be an immediate expression"), | |
4320 | arg->argnum); | |
4321 | return FALSE; | |
a92713e6 RS |
4322 | } |
4323 | ||
4324 | /* Try to get a constant expression from the next tokens in ARG. Consume | |
4325 | the tokens and return return true on success, storing the constant value | |
4326 | in *VALUE. Use FALLBACK as the value if the match succeeded with an | |
4327 | error. */ | |
4328 | ||
4329 | static bfd_boolean | |
1a00e612 | 4330 | match_const_int (struct mips_arg_info *arg, offsetT *value) |
a92713e6 RS |
4331 | { |
4332 | expressionS ex; | |
4333 | bfd_reloc_code_real_type r[3]; | |
a1d78564 | 4334 | |
a92713e6 RS |
4335 | if (!match_expression (arg, &ex, r)) |
4336 | return FALSE; | |
4337 | ||
4338 | if (r[0] == BFD_RELOC_UNUSED && ex.X_op == O_constant) | |
a1d78564 RS |
4339 | *value = ex.X_add_number; |
4340 | else | |
4341 | { | |
1a00e612 RS |
4342 | match_not_constant (arg); |
4343 | return FALSE; | |
a1d78564 | 4344 | } |
a92713e6 | 4345 | return TRUE; |
a1d78564 RS |
4346 | } |
4347 | ||
4348 | /* Return the RTYPE_* flags for a register operand of type TYPE that | |
4349 | appears in instruction OPCODE. */ | |
4350 | ||
4351 | static unsigned int | |
4352 | convert_reg_type (const struct mips_opcode *opcode, | |
4353 | enum mips_reg_operand_type type) | |
4354 | { | |
4355 | switch (type) | |
4356 | { | |
4357 | case OP_REG_GP: | |
4358 | return RTYPE_NUM | RTYPE_GP; | |
4359 | ||
4360 | case OP_REG_FP: | |
4361 | /* Allow vector register names for MDMX if the instruction is a 64-bit | |
4362 | FPR load, store or move (including moves to and from GPRs). */ | |
4363 | if ((mips_opts.ase & ASE_MDMX) | |
4364 | && (opcode->pinfo & FP_D) | |
4365 | && (opcode->pinfo & (INSN_COPROC_MOVE_DELAY | |
4366 | | INSN_COPROC_MEMORY_DELAY | |
4367 | | INSN_LOAD_COPROC_DELAY | |
4368 | | INSN_LOAD_MEMORY_DELAY | |
4369 | | INSN_STORE_MEMORY))) | |
4370 | return RTYPE_FPU | RTYPE_VEC; | |
4371 | return RTYPE_FPU; | |
4372 | ||
4373 | case OP_REG_CCC: | |
4374 | if (opcode->pinfo & (FP_D | FP_S)) | |
4375 | return RTYPE_CCC | RTYPE_FCC; | |
4376 | return RTYPE_CCC; | |
4377 | ||
4378 | case OP_REG_VEC: | |
4379 | if (opcode->membership & INSN_5400) | |
4380 | return RTYPE_FPU; | |
4381 | return RTYPE_FPU | RTYPE_VEC; | |
4382 | ||
4383 | case OP_REG_ACC: | |
4384 | return RTYPE_ACC; | |
4385 | ||
4386 | case OP_REG_COPRO: | |
4387 | if (opcode->name[strlen (opcode->name) - 1] == '0') | |
4388 | return RTYPE_NUM | RTYPE_CP0; | |
4389 | return RTYPE_NUM; | |
4390 | ||
4391 | case OP_REG_HW: | |
4392 | return RTYPE_NUM; | |
14daeee3 RS |
4393 | |
4394 | case OP_REG_VI: | |
4395 | return RTYPE_NUM | RTYPE_VI; | |
4396 | ||
4397 | case OP_REG_VF: | |
4398 | return RTYPE_NUM | RTYPE_VF; | |
4399 | ||
4400 | case OP_REG_R5900_I: | |
4401 | return RTYPE_R5900_I; | |
4402 | ||
4403 | case OP_REG_R5900_Q: | |
4404 | return RTYPE_R5900_Q; | |
4405 | ||
4406 | case OP_REG_R5900_R: | |
4407 | return RTYPE_R5900_R; | |
4408 | ||
4409 | case OP_REG_R5900_ACC: | |
4410 | return RTYPE_R5900_ACC; | |
a1d78564 RS |
4411 | } |
4412 | abort (); | |
4413 | } | |
4414 | ||
4415 | /* ARG is register REGNO, of type TYPE. Warn about any dubious registers. */ | |
4416 | ||
4417 | static void | |
4418 | check_regno (struct mips_arg_info *arg, | |
4419 | enum mips_reg_operand_type type, unsigned int regno) | |
4420 | { | |
4421 | if (AT && type == OP_REG_GP && regno == AT) | |
4422 | arg->seen_at = TRUE; | |
4423 | ||
4424 | if (type == OP_REG_FP | |
4425 | && (regno & 1) != 0 | |
4426 | && HAVE_32BIT_FPRS | |
4427 | && !mips_oddfpreg_ok (arg->insn->insn_mo, arg->opnum)) | |
1661c76c | 4428 | as_warn (_("float register should be even, was %d"), regno); |
a1d78564 RS |
4429 | |
4430 | if (type == OP_REG_CCC) | |
4431 | { | |
4432 | const char *name; | |
4433 | size_t length; | |
4434 | ||
4435 | name = arg->insn->insn_mo->name; | |
4436 | length = strlen (name); | |
4437 | if ((regno & 1) != 0 | |
4438 | && ((length >= 3 && strcmp (name + length - 3, ".ps") == 0) | |
4439 | || (length >= 5 && strncmp (name + length - 5, "any2", 4) == 0))) | |
1661c76c | 4440 | as_warn (_("condition code register should be even for %s, was %d"), |
a1d78564 RS |
4441 | name, regno); |
4442 | ||
4443 | if ((regno & 3) != 0 | |
4444 | && (length >= 5 && strncmp (name + length - 5, "any4", 4) == 0)) | |
1661c76c | 4445 | as_warn (_("condition code register should be 0 or 4 for %s, was %d"), |
a1d78564 RS |
4446 | name, regno); |
4447 | } | |
4448 | } | |
4449 | ||
a92713e6 RS |
4450 | /* ARG is a register with symbol value SYMVAL. Try to interpret it as |
4451 | a register of type TYPE. Return true on success, storing the register | |
4452 | number in *REGNO and warning about any dubious uses. */ | |
4453 | ||
4454 | static bfd_boolean | |
4455 | match_regno (struct mips_arg_info *arg, enum mips_reg_operand_type type, | |
4456 | unsigned int symval, unsigned int *regno) | |
4457 | { | |
4458 | if (type == OP_REG_VEC) | |
4459 | symval = mips_prefer_vec_regno (symval); | |
4460 | if (!(symval & convert_reg_type (arg->insn->insn_mo, type))) | |
4461 | return FALSE; | |
4462 | ||
4463 | *regno = symval & RNUM_MASK; | |
4464 | check_regno (arg, type, *regno); | |
4465 | return TRUE; | |
4466 | } | |
4467 | ||
4468 | /* Try to interpret the next token in ARG as a register of type TYPE. | |
4469 | Consume the token and return true on success, storing the register | |
4470 | number in *REGNO. Return false on failure. */ | |
4471 | ||
4472 | static bfd_boolean | |
4473 | match_reg (struct mips_arg_info *arg, enum mips_reg_operand_type type, | |
4474 | unsigned int *regno) | |
4475 | { | |
4476 | if (arg->token->type == OT_REG | |
4477 | && match_regno (arg, type, arg->token->u.regno, regno)) | |
4478 | { | |
4479 | ++arg->token; | |
4480 | return TRUE; | |
4481 | } | |
4482 | return FALSE; | |
4483 | } | |
4484 | ||
4485 | /* Try to interpret the next token in ARG as a range of registers of type TYPE. | |
4486 | Consume the token and return true on success, storing the register numbers | |
4487 | in *REGNO1 and *REGNO2. Return false on failure. */ | |
4488 | ||
4489 | static bfd_boolean | |
4490 | match_reg_range (struct mips_arg_info *arg, enum mips_reg_operand_type type, | |
4491 | unsigned int *regno1, unsigned int *regno2) | |
4492 | { | |
4493 | if (match_reg (arg, type, regno1)) | |
4494 | { | |
4495 | *regno2 = *regno1; | |
4496 | return TRUE; | |
4497 | } | |
4498 | if (arg->token->type == OT_REG_RANGE | |
4499 | && match_regno (arg, type, arg->token->u.reg_range.regno1, regno1) | |
4500 | && match_regno (arg, type, arg->token->u.reg_range.regno2, regno2) | |
4501 | && *regno1 <= *regno2) | |
4502 | { | |
4503 | ++arg->token; | |
4504 | return TRUE; | |
4505 | } | |
4506 | return FALSE; | |
4507 | } | |
4508 | ||
a1d78564 RS |
4509 | /* OP_INT matcher. */ |
4510 | ||
a92713e6 | 4511 | static bfd_boolean |
a1d78564 | 4512 | match_int_operand (struct mips_arg_info *arg, |
a92713e6 | 4513 | const struct mips_operand *operand_base) |
a1d78564 RS |
4514 | { |
4515 | const struct mips_int_operand *operand; | |
3ccad066 | 4516 | unsigned int uval; |
a1d78564 RS |
4517 | int min_val, max_val, factor; |
4518 | offsetT sval; | |
a1d78564 RS |
4519 | |
4520 | operand = (const struct mips_int_operand *) operand_base; | |
4521 | factor = 1 << operand->shift; | |
3ccad066 RS |
4522 | min_val = mips_int_operand_min (operand); |
4523 | max_val = mips_int_operand_max (operand); | |
a1d78564 | 4524 | |
d436c1c2 RS |
4525 | if (operand_base->lsb == 0 |
4526 | && operand_base->size == 16 | |
4527 | && operand->shift == 0 | |
4528 | && operand->bias == 0 | |
4529 | && (operand->max_val == 32767 || operand->max_val == 65535)) | |
a1d78564 RS |
4530 | { |
4531 | /* The operand can be relocated. */ | |
a92713e6 RS |
4532 | if (!match_expression (arg, &offset_expr, offset_reloc)) |
4533 | return FALSE; | |
4534 | ||
4535 | if (offset_reloc[0] != BFD_RELOC_UNUSED) | |
a1d78564 RS |
4536 | /* Relocation operators were used. Accept the arguent and |
4537 | leave the relocation value in offset_expr and offset_relocs | |
4538 | for the caller to process. */ | |
a92713e6 RS |
4539 | return TRUE; |
4540 | ||
4541 | if (offset_expr.X_op != O_constant) | |
a1d78564 | 4542 | { |
60f20e8b RS |
4543 | /* Accept non-constant operands if no later alternative matches, |
4544 | leaving it for the caller to process. */ | |
4545 | if (!arg->lax_match) | |
4546 | return FALSE; | |
a92713e6 RS |
4547 | offset_reloc[0] = BFD_RELOC_LO16; |
4548 | return TRUE; | |
a1d78564 | 4549 | } |
a92713e6 | 4550 | |
a1d78564 RS |
4551 | /* Clear the global state; we're going to install the operand |
4552 | ourselves. */ | |
a92713e6 | 4553 | sval = offset_expr.X_add_number; |
a1d78564 | 4554 | offset_expr.X_op = O_absent; |
60f20e8b RS |
4555 | |
4556 | /* For compatibility with older assemblers, we accept | |
4557 | 0x8000-0xffff as signed 16-bit numbers when only | |
4558 | signed numbers are allowed. */ | |
4559 | if (sval > max_val) | |
4560 | { | |
4561 | max_val = ((1 << operand_base->size) - 1) << operand->shift; | |
4562 | if (!arg->lax_match && sval <= max_val) | |
4563 | return FALSE; | |
4564 | } | |
a1d78564 RS |
4565 | } |
4566 | else | |
4567 | { | |
1a00e612 | 4568 | if (!match_const_int (arg, &sval)) |
a92713e6 | 4569 | return FALSE; |
a1d78564 RS |
4570 | } |
4571 | ||
4572 | arg->last_op_int = sval; | |
4573 | ||
1a00e612 | 4574 | if (sval < min_val || sval > max_val || sval % factor) |
a1d78564 | 4575 | { |
1a00e612 RS |
4576 | match_out_of_range (arg); |
4577 | return FALSE; | |
a1d78564 RS |
4578 | } |
4579 | ||
4580 | uval = (unsigned int) sval >> operand->shift; | |
4581 | uval -= operand->bias; | |
4582 | ||
4583 | /* Handle -mfix-cn63xxp1. */ | |
4584 | if (arg->opnum == 1 | |
4585 | && mips_fix_cn63xxp1 | |
4586 | && !mips_opts.micromips | |
4587 | && strcmp ("pref", arg->insn->insn_mo->name) == 0) | |
4588 | switch (uval) | |
4589 | { | |
4590 | case 5: | |
4591 | case 25: | |
4592 | case 26: | |
4593 | case 27: | |
4594 | case 28: | |
4595 | case 29: | |
4596 | case 30: | |
4597 | case 31: | |
4598 | /* These are ok. */ | |
4599 | break; | |
4600 | ||
4601 | default: | |
4602 | /* The rest must be changed to 28. */ | |
4603 | uval = 28; | |
4604 | break; | |
4605 | } | |
4606 | ||
4607 | insn_insert_operand (arg->insn, operand_base, uval); | |
a92713e6 | 4608 | return TRUE; |
a1d78564 RS |
4609 | } |
4610 | ||
4611 | /* OP_MAPPED_INT matcher. */ | |
4612 | ||
a92713e6 | 4613 | static bfd_boolean |
a1d78564 | 4614 | match_mapped_int_operand (struct mips_arg_info *arg, |
a92713e6 | 4615 | const struct mips_operand *operand_base) |
a1d78564 RS |
4616 | { |
4617 | const struct mips_mapped_int_operand *operand; | |
4618 | unsigned int uval, num_vals; | |
4619 | offsetT sval; | |
4620 | ||
4621 | operand = (const struct mips_mapped_int_operand *) operand_base; | |
1a00e612 | 4622 | if (!match_const_int (arg, &sval)) |
a92713e6 | 4623 | return FALSE; |
a1d78564 RS |
4624 | |
4625 | num_vals = 1 << operand_base->size; | |
4626 | for (uval = 0; uval < num_vals; uval++) | |
4627 | if (operand->int_map[uval] == sval) | |
4628 | break; | |
4629 | if (uval == num_vals) | |
1a00e612 RS |
4630 | { |
4631 | match_out_of_range (arg); | |
4632 | return FALSE; | |
4633 | } | |
a1d78564 RS |
4634 | |
4635 | insn_insert_operand (arg->insn, operand_base, uval); | |
a92713e6 | 4636 | return TRUE; |
a1d78564 RS |
4637 | } |
4638 | ||
4639 | /* OP_MSB matcher. */ | |
4640 | ||
a92713e6 | 4641 | static bfd_boolean |
a1d78564 | 4642 | match_msb_operand (struct mips_arg_info *arg, |
a92713e6 | 4643 | const struct mips_operand *operand_base) |
a1d78564 RS |
4644 | { |
4645 | const struct mips_msb_operand *operand; | |
4646 | int min_val, max_val, max_high; | |
4647 | offsetT size, sval, high; | |
4648 | ||
4649 | operand = (const struct mips_msb_operand *) operand_base; | |
4650 | min_val = operand->bias; | |
4651 | max_val = min_val + (1 << operand_base->size) - 1; | |
4652 | max_high = operand->opsize; | |
4653 | ||
1a00e612 | 4654 | if (!match_const_int (arg, &size)) |
a92713e6 | 4655 | return FALSE; |
a1d78564 RS |
4656 | |
4657 | high = size + arg->last_op_int; | |
4658 | sval = operand->add_lsb ? high : size; | |
4659 | ||
4660 | if (size < 0 || high > max_high || sval < min_val || sval > max_val) | |
4661 | { | |
1a00e612 RS |
4662 | match_out_of_range (arg); |
4663 | return FALSE; | |
a1d78564 RS |
4664 | } |
4665 | insn_insert_operand (arg->insn, operand_base, sval - min_val); | |
a92713e6 | 4666 | return TRUE; |
a1d78564 RS |
4667 | } |
4668 | ||
4669 | /* OP_REG matcher. */ | |
4670 | ||
a92713e6 | 4671 | static bfd_boolean |
a1d78564 | 4672 | match_reg_operand (struct mips_arg_info *arg, |
a92713e6 | 4673 | const struct mips_operand *operand_base) |
a1d78564 RS |
4674 | { |
4675 | const struct mips_reg_operand *operand; | |
a92713e6 | 4676 | unsigned int regno, uval, num_vals; |
a1d78564 RS |
4677 | |
4678 | operand = (const struct mips_reg_operand *) operand_base; | |
a92713e6 RS |
4679 | if (!match_reg (arg, operand->reg_type, ®no)) |
4680 | return FALSE; | |
a1d78564 RS |
4681 | |
4682 | if (operand->reg_map) | |
4683 | { | |
4684 | num_vals = 1 << operand->root.size; | |
4685 | for (uval = 0; uval < num_vals; uval++) | |
4686 | if (operand->reg_map[uval] == regno) | |
4687 | break; | |
4688 | if (num_vals == uval) | |
a92713e6 | 4689 | return FALSE; |
a1d78564 RS |
4690 | } |
4691 | else | |
4692 | uval = regno; | |
4693 | ||
a1d78564 RS |
4694 | arg->last_regno = regno; |
4695 | if (arg->opnum == 1) | |
4696 | arg->dest_regno = regno; | |
4697 | insn_insert_operand (arg->insn, operand_base, uval); | |
a92713e6 | 4698 | return TRUE; |
a1d78564 RS |
4699 | } |
4700 | ||
4701 | /* OP_REG_PAIR matcher. */ | |
4702 | ||
a92713e6 | 4703 | static bfd_boolean |
a1d78564 | 4704 | match_reg_pair_operand (struct mips_arg_info *arg, |
a92713e6 | 4705 | const struct mips_operand *operand_base) |
a1d78564 RS |
4706 | { |
4707 | const struct mips_reg_pair_operand *operand; | |
a92713e6 | 4708 | unsigned int regno1, regno2, uval, num_vals; |
a1d78564 RS |
4709 | |
4710 | operand = (const struct mips_reg_pair_operand *) operand_base; | |
a92713e6 RS |
4711 | if (!match_reg (arg, operand->reg_type, ®no1) |
4712 | || !match_char (arg, ',') | |
4713 | || !match_reg (arg, operand->reg_type, ®no2)) | |
4714 | return FALSE; | |
a1d78564 RS |
4715 | |
4716 | num_vals = 1 << operand_base->size; | |
4717 | for (uval = 0; uval < num_vals; uval++) | |
4718 | if (operand->reg1_map[uval] == regno1 && operand->reg2_map[uval] == regno2) | |
4719 | break; | |
4720 | if (uval == num_vals) | |
a92713e6 | 4721 | return FALSE; |
a1d78564 | 4722 | |
a1d78564 | 4723 | insn_insert_operand (arg->insn, operand_base, uval); |
a92713e6 | 4724 | return TRUE; |
a1d78564 RS |
4725 | } |
4726 | ||
4727 | /* OP_PCREL matcher. The caller chooses the relocation type. */ | |
4728 | ||
a92713e6 RS |
4729 | static bfd_boolean |
4730 | match_pcrel_operand (struct mips_arg_info *arg) | |
a1d78564 | 4731 | { |
a92713e6 RS |
4732 | bfd_reloc_code_real_type r[3]; |
4733 | ||
4734 | return match_expression (arg, &offset_expr, r) && r[0] == BFD_RELOC_UNUSED; | |
a1d78564 RS |
4735 | } |
4736 | ||
4737 | /* OP_PERF_REG matcher. */ | |
4738 | ||
a92713e6 | 4739 | static bfd_boolean |
a1d78564 | 4740 | match_perf_reg_operand (struct mips_arg_info *arg, |
a92713e6 | 4741 | const struct mips_operand *operand) |
a1d78564 RS |
4742 | { |
4743 | offsetT sval; | |
4744 | ||
1a00e612 | 4745 | if (!match_const_int (arg, &sval)) |
a92713e6 | 4746 | return FALSE; |
a1d78564 RS |
4747 | |
4748 | if (sval != 0 | |
4749 | && (sval != 1 | |
4750 | || (mips_opts.arch == CPU_R5900 | |
4751 | && (strcmp (arg->insn->insn_mo->name, "mfps") == 0 | |
4752 | || strcmp (arg->insn->insn_mo->name, "mtps") == 0)))) | |
4753 | { | |
1a00e612 RS |
4754 | set_insn_error (arg->argnum, _("invalid performance register")); |
4755 | return FALSE; | |
a1d78564 RS |
4756 | } |
4757 | ||
4758 | insn_insert_operand (arg->insn, operand, sval); | |
a92713e6 | 4759 | return TRUE; |
a1d78564 RS |
4760 | } |
4761 | ||
4762 | /* OP_ADDIUSP matcher. */ | |
4763 | ||
a92713e6 | 4764 | static bfd_boolean |
a1d78564 | 4765 | match_addiusp_operand (struct mips_arg_info *arg, |
a92713e6 | 4766 | const struct mips_operand *operand) |
a1d78564 RS |
4767 | { |
4768 | offsetT sval; | |
4769 | unsigned int uval; | |
4770 | ||
1a00e612 | 4771 | if (!match_const_int (arg, &sval)) |
a92713e6 | 4772 | return FALSE; |
a1d78564 RS |
4773 | |
4774 | if (sval % 4) | |
1a00e612 RS |
4775 | { |
4776 | match_out_of_range (arg); | |
4777 | return FALSE; | |
4778 | } | |
a1d78564 RS |
4779 | |
4780 | sval /= 4; | |
4781 | if (!(sval >= -258 && sval <= 257) || (sval >= -2 && sval <= 1)) | |
1a00e612 RS |
4782 | { |
4783 | match_out_of_range (arg); | |
4784 | return FALSE; | |
4785 | } | |
a1d78564 RS |
4786 | |
4787 | uval = (unsigned int) sval; | |
4788 | uval = ((uval >> 1) & ~0xff) | (uval & 0xff); | |
4789 | insn_insert_operand (arg->insn, operand, uval); | |
a92713e6 | 4790 | return TRUE; |
a1d78564 RS |
4791 | } |
4792 | ||
4793 | /* OP_CLO_CLZ_DEST matcher. */ | |
4794 | ||
a92713e6 | 4795 | static bfd_boolean |
a1d78564 | 4796 | match_clo_clz_dest_operand (struct mips_arg_info *arg, |
a92713e6 | 4797 | const struct mips_operand *operand) |
a1d78564 RS |
4798 | { |
4799 | unsigned int regno; | |
4800 | ||
a92713e6 RS |
4801 | if (!match_reg (arg, OP_REG_GP, ®no)) |
4802 | return FALSE; | |
a1d78564 | 4803 | |
a1d78564 | 4804 | insn_insert_operand (arg->insn, operand, regno | (regno << 5)); |
a92713e6 | 4805 | return TRUE; |
a1d78564 RS |
4806 | } |
4807 | ||
4808 | /* OP_LWM_SWM_LIST matcher. */ | |
4809 | ||
a92713e6 | 4810 | static bfd_boolean |
a1d78564 | 4811 | match_lwm_swm_list_operand (struct mips_arg_info *arg, |
a92713e6 | 4812 | const struct mips_operand *operand) |
a1d78564 | 4813 | { |
a92713e6 RS |
4814 | unsigned int reglist, sregs, ra, regno1, regno2; |
4815 | struct mips_arg_info reset; | |
a1d78564 | 4816 | |
a92713e6 RS |
4817 | reglist = 0; |
4818 | if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2)) | |
4819 | return FALSE; | |
4820 | do | |
4821 | { | |
4822 | if (regno2 == FP && regno1 >= S0 && regno1 <= S7) | |
4823 | { | |
4824 | reglist |= 1 << FP; | |
4825 | regno2 = S7; | |
4826 | } | |
4827 | reglist |= ((1U << regno2 << 1) - 1) & -(1U << regno1); | |
4828 | reset = *arg; | |
4829 | } | |
4830 | while (match_char (arg, ',') | |
4831 | && match_reg_range (arg, OP_REG_GP, ®no1, ®no2)); | |
4832 | *arg = reset; | |
a1d78564 RS |
4833 | |
4834 | if (operand->size == 2) | |
4835 | { | |
4836 | /* The list must include both ra and s0-sN, for 0 <= N <= 3. E.g.: | |
4837 | ||
4838 | s0, ra | |
4839 | s0, s1, ra, s2, s3 | |
4840 | s0-s2, ra | |
4841 | ||
4842 | and any permutations of these. */ | |
4843 | if ((reglist & 0xfff1ffff) != 0x80010000) | |
a92713e6 | 4844 | return FALSE; |
a1d78564 RS |
4845 | |
4846 | sregs = (reglist >> 17) & 7; | |
4847 | ra = 0; | |
4848 | } | |
4849 | else | |
4850 | { | |
4851 | /* The list must include at least one of ra and s0-sN, | |
4852 | for 0 <= N <= 8. (Note that there is a gap between s7 and s8, | |
4853 | which are $23 and $30 respectively.) E.g.: | |
4854 | ||
4855 | ra | |
4856 | s0 | |
4857 | ra, s0, s1, s2 | |
4858 | s0-s8 | |
4859 | s0-s5, ra | |
4860 | ||
4861 | and any permutations of these. */ | |
4862 | if ((reglist & 0x3f00ffff) != 0) | |
a92713e6 | 4863 | return FALSE; |
a1d78564 RS |
4864 | |
4865 | ra = (reglist >> 27) & 0x10; | |
4866 | sregs = ((reglist >> 22) & 0x100) | ((reglist >> 16) & 0xff); | |
4867 | } | |
4868 | sregs += 1; | |
4869 | if ((sregs & -sregs) != sregs) | |
a92713e6 | 4870 | return FALSE; |
a1d78564 RS |
4871 | |
4872 | insn_insert_operand (arg->insn, operand, (ffs (sregs) - 1) | ra); | |
a92713e6 | 4873 | return TRUE; |
a1d78564 RS |
4874 | } |
4875 | ||
364215c8 RS |
4876 | /* OP_ENTRY_EXIT_LIST matcher. */ |
4877 | ||
a92713e6 | 4878 | static unsigned int |
364215c8 | 4879 | match_entry_exit_operand (struct mips_arg_info *arg, |
a92713e6 | 4880 | const struct mips_operand *operand) |
364215c8 RS |
4881 | { |
4882 | unsigned int mask; | |
4883 | bfd_boolean is_exit; | |
4884 | ||
4885 | /* The format is the same for both ENTRY and EXIT, but the constraints | |
4886 | are different. */ | |
4887 | is_exit = strcmp (arg->insn->insn_mo->name, "exit") == 0; | |
4888 | mask = (is_exit ? 7 << 3 : 0); | |
a92713e6 | 4889 | do |
364215c8 RS |
4890 | { |
4891 | unsigned int regno1, regno2; | |
4892 | bfd_boolean is_freg; | |
4893 | ||
a92713e6 | 4894 | if (match_reg_range (arg, OP_REG_GP, ®no1, ®no2)) |
364215c8 | 4895 | is_freg = FALSE; |
a92713e6 | 4896 | else if (match_reg_range (arg, OP_REG_FP, ®no1, ®no2)) |
364215c8 RS |
4897 | is_freg = TRUE; |
4898 | else | |
a92713e6 | 4899 | return FALSE; |
364215c8 RS |
4900 | |
4901 | if (is_exit && is_freg && regno1 == 0 && regno2 < 2) | |
4902 | { | |
4903 | mask &= ~(7 << 3); | |
4904 | mask |= (5 + regno2) << 3; | |
4905 | } | |
4906 | else if (!is_exit && regno1 == 4 && regno2 >= 4 && regno2 <= 7) | |
4907 | mask |= (regno2 - 3) << 3; | |
4908 | else if (regno1 == 16 && regno2 >= 16 && regno2 <= 17) | |
4909 | mask |= (regno2 - 15) << 1; | |
4910 | else if (regno1 == RA && regno2 == RA) | |
4911 | mask |= 1; | |
4912 | else | |
a92713e6 | 4913 | return FALSE; |
364215c8 | 4914 | } |
a92713e6 RS |
4915 | while (match_char (arg, ',')); |
4916 | ||
364215c8 | 4917 | insn_insert_operand (arg->insn, operand, mask); |
a92713e6 | 4918 | return TRUE; |
364215c8 RS |
4919 | } |
4920 | ||
4921 | /* OP_SAVE_RESTORE_LIST matcher. */ | |
4922 | ||
a92713e6 RS |
4923 | static bfd_boolean |
4924 | match_save_restore_list_operand (struct mips_arg_info *arg) | |
364215c8 RS |
4925 | { |
4926 | unsigned int opcode, args, statics, sregs; | |
4927 | unsigned int num_frame_sizes, num_args, num_statics, num_sregs; | |
364215c8 | 4928 | offsetT frame_size; |
364215c8 | 4929 | |
364215c8 RS |
4930 | opcode = arg->insn->insn_opcode; |
4931 | frame_size = 0; | |
4932 | num_frame_sizes = 0; | |
4933 | args = 0; | |
4934 | statics = 0; | |
4935 | sregs = 0; | |
a92713e6 | 4936 | do |
364215c8 RS |
4937 | { |
4938 | unsigned int regno1, regno2; | |
4939 | ||
a92713e6 | 4940 | if (arg->token->type == OT_INTEGER) |
364215c8 RS |
4941 | { |
4942 | /* Handle the frame size. */ | |
1a00e612 | 4943 | if (!match_const_int (arg, &frame_size)) |
a92713e6 | 4944 | return FALSE; |
364215c8 | 4945 | num_frame_sizes += 1; |
364215c8 RS |
4946 | } |
4947 | else | |
4948 | { | |
a92713e6 RS |
4949 | if (!match_reg_range (arg, OP_REG_GP, ®no1, ®no2)) |
4950 | return FALSE; | |
364215c8 RS |
4951 | |
4952 | while (regno1 <= regno2) | |
4953 | { | |
4954 | if (regno1 >= 4 && regno1 <= 7) | |
4955 | { | |
4956 | if (num_frame_sizes == 0) | |
4957 | /* args $a0-$a3 */ | |
4958 | args |= 1 << (regno1 - 4); | |
4959 | else | |
4960 | /* statics $a0-$a3 */ | |
4961 | statics |= 1 << (regno1 - 4); | |
4962 | } | |
4963 | else if (regno1 >= 16 && regno1 <= 23) | |
4964 | /* $s0-$s7 */ | |
4965 | sregs |= 1 << (regno1 - 16); | |
4966 | else if (regno1 == 30) | |
4967 | /* $s8 */ | |
4968 | sregs |= 1 << 8; | |
4969 | else if (regno1 == 31) | |
4970 | /* Add $ra to insn. */ | |
4971 | opcode |= 0x40; | |
4972 | else | |
a92713e6 | 4973 | return FALSE; |
364215c8 RS |
4974 | regno1 += 1; |
4975 | if (regno1 == 24) | |
4976 | regno1 = 30; | |
4977 | } | |
4978 | } | |
364215c8 | 4979 | } |
a92713e6 | 4980 | while (match_char (arg, ',')); |
364215c8 RS |
4981 | |
4982 | /* Encode args/statics combination. */ | |
4983 | if (args & statics) | |
a92713e6 | 4984 | return FALSE; |
364215c8 RS |
4985 | else if (args == 0xf) |
4986 | /* All $a0-$a3 are args. */ | |
4987 | opcode |= MIPS16_ALL_ARGS << 16; | |
4988 | else if (statics == 0xf) | |
4989 | /* All $a0-$a3 are statics. */ | |
4990 | opcode |= MIPS16_ALL_STATICS << 16; | |
4991 | else | |
4992 | { | |
4993 | /* Count arg registers. */ | |
4994 | num_args = 0; | |
4995 | while (args & 0x1) | |
4996 | { | |
4997 | args >>= 1; | |
4998 | num_args += 1; | |
4999 | } | |
5000 | if (args != 0) | |
a92713e6 | 5001 | return FALSE; |
364215c8 RS |
5002 | |
5003 | /* Count static registers. */ | |
5004 | num_statics = 0; | |
5005 | while (statics & 0x8) | |
5006 | { | |
5007 | statics = (statics << 1) & 0xf; | |
5008 | num_statics += 1; | |
5009 | } | |
5010 | if (statics != 0) | |
a92713e6 | 5011 | return FALSE; |
364215c8 RS |
5012 | |
5013 | /* Encode args/statics. */ | |
5014 | opcode |= ((num_args << 2) | num_statics) << 16; | |
5015 | } | |
5016 | ||
5017 | /* Encode $s0/$s1. */ | |
5018 | if (sregs & (1 << 0)) /* $s0 */ | |
5019 | opcode |= 0x20; | |
5020 | if (sregs & (1 << 1)) /* $s1 */ | |
5021 | opcode |= 0x10; | |
5022 | sregs >>= 2; | |
5023 | ||
5024 | /* Encode $s2-$s8. */ | |
5025 | num_sregs = 0; | |
5026 | while (sregs & 1) | |
5027 | { | |
5028 | sregs >>= 1; | |
5029 | num_sregs += 1; | |
5030 | } | |
5031 | if (sregs != 0) | |
a92713e6 | 5032 | return FALSE; |
364215c8 RS |
5033 | opcode |= num_sregs << 24; |
5034 | ||
5035 | /* Encode frame size. */ | |
5036 | if (num_frame_sizes == 0) | |
1a00e612 RS |
5037 | { |
5038 | set_insn_error (arg->argnum, _("missing frame size")); | |
5039 | return FALSE; | |
5040 | } | |
5041 | if (num_frame_sizes > 1) | |
5042 | { | |
5043 | set_insn_error (arg->argnum, _("frame size specified twice")); | |
5044 | return FALSE; | |
5045 | } | |
5046 | if ((frame_size & 7) != 0 || frame_size < 0 || frame_size > 0xff * 8) | |
5047 | { | |
5048 | set_insn_error (arg->argnum, _("invalid frame size")); | |
5049 | return FALSE; | |
5050 | } | |
5051 | if (frame_size != 128 || (opcode >> 16) != 0) | |
364215c8 RS |
5052 | { |
5053 | frame_size /= 8; | |
5054 | opcode |= (((frame_size & 0xf0) << 16) | |
5055 | | (frame_size & 0x0f)); | |
5056 | } | |
5057 | ||
364215c8 RS |
5058 | /* Finally build the instruction. */ |
5059 | if ((opcode >> 16) != 0 || frame_size == 0) | |
5060 | opcode |= MIPS16_EXTEND; | |
5061 | arg->insn->insn_opcode = opcode; | |
a92713e6 | 5062 | return TRUE; |
364215c8 RS |
5063 | } |
5064 | ||
a1d78564 RS |
5065 | /* OP_MDMX_IMM_REG matcher. */ |
5066 | ||
a92713e6 | 5067 | static bfd_boolean |
a1d78564 | 5068 | match_mdmx_imm_reg_operand (struct mips_arg_info *arg, |
a92713e6 | 5069 | const struct mips_operand *operand) |
a1d78564 | 5070 | { |
a92713e6 | 5071 | unsigned int regno, uval; |
a1d78564 RS |
5072 | bfd_boolean is_qh; |
5073 | const struct mips_opcode *opcode; | |
5074 | ||
5075 | /* The mips_opcode records whether this is an octobyte or quadhalf | |
5076 | instruction. Start out with that bit in place. */ | |
5077 | opcode = arg->insn->insn_mo; | |
5078 | uval = mips_extract_operand (operand, opcode->match); | |
5079 | is_qh = (uval != 0); | |
5080 | ||
a92713e6 | 5081 | if (arg->token->type == OT_REG || arg->token->type == OT_REG_ELEMENT) |
a1d78564 RS |
5082 | { |
5083 | if ((opcode->membership & INSN_5400) | |
5084 | && strcmp (opcode->name, "rzu.ob") == 0) | |
5085 | { | |
1a00e612 RS |
5086 | set_insn_error_i (arg->argnum, _("operand %d must be an immediate"), |
5087 | arg->argnum); | |
5088 | return FALSE; | |
a1d78564 RS |
5089 | } |
5090 | ||
5091 | /* Check whether this is a vector register or a broadcast of | |
5092 | a single element. */ | |
a92713e6 | 5093 | if (arg->token->type == OT_REG_ELEMENT) |
a1d78564 | 5094 | { |
a92713e6 RS |
5095 | if (!match_regno (arg, OP_REG_VEC, arg->token->u.reg_element.regno, |
5096 | ®no)) | |
5097 | return FALSE; | |
5098 | if (arg->token->u.reg_element.index > (is_qh ? 3 : 7)) | |
a1d78564 | 5099 | { |
1a00e612 RS |
5100 | set_insn_error (arg->argnum, _("invalid element selector")); |
5101 | return FALSE; | |
a1d78564 | 5102 | } |
a1d78564 | 5103 | else |
a92713e6 | 5104 | uval |= arg->token->u.reg_element.index << (is_qh ? 2 : 1) << 5; |
a1d78564 RS |
5105 | } |
5106 | else | |
5107 | { | |
5108 | /* A full vector. */ | |
5109 | if ((opcode->membership & INSN_5400) | |
5110 | && (strcmp (opcode->name, "sll.ob") == 0 | |
5111 | || strcmp (opcode->name, "srl.ob") == 0)) | |
5112 | { | |
1a00e612 RS |
5113 | set_insn_error_i (arg->argnum, _("operand %d must be scalar"), |
5114 | arg->argnum); | |
5115 | return FALSE; | |
a1d78564 RS |
5116 | } |
5117 | ||
a92713e6 RS |
5118 | if (!match_regno (arg, OP_REG_VEC, arg->token->u.regno, ®no)) |
5119 | return FALSE; | |
a1d78564 RS |
5120 | if (is_qh) |
5121 | uval |= MDMX_FMTSEL_VEC_QH << 5; | |
5122 | else | |
5123 | uval |= MDMX_FMTSEL_VEC_OB << 5; | |
5124 | } | |
a1d78564 | 5125 | uval |= regno; |
a92713e6 | 5126 | ++arg->token; |
a1d78564 RS |
5127 | } |
5128 | else | |
5129 | { | |
5130 | offsetT sval; | |
5131 | ||
1a00e612 | 5132 | if (!match_const_int (arg, &sval)) |
a92713e6 | 5133 | return FALSE; |
a1d78564 RS |
5134 | if (sval < 0 || sval > 31) |
5135 | { | |
1a00e612 RS |
5136 | match_out_of_range (arg); |
5137 | return FALSE; | |
a1d78564 RS |
5138 | } |
5139 | uval |= (sval & 31); | |
5140 | if (is_qh) | |
5141 | uval |= MDMX_FMTSEL_IMM_QH << 5; | |
5142 | else | |
5143 | uval |= MDMX_FMTSEL_IMM_OB << 5; | |
5144 | } | |
5145 | insn_insert_operand (arg->insn, operand, uval); | |
a92713e6 | 5146 | return TRUE; |
a1d78564 RS |
5147 | } |
5148 | ||
5149 | /* OP_PC matcher. */ | |
5150 | ||
a92713e6 RS |
5151 | static bfd_boolean |
5152 | match_pc_operand (struct mips_arg_info *arg) | |
a1d78564 | 5153 | { |
a92713e6 RS |
5154 | if (arg->token->type == OT_REG && (arg->token->u.regno & RTYPE_PC)) |
5155 | { | |
5156 | ++arg->token; | |
5157 | return TRUE; | |
5158 | } | |
5159 | return FALSE; | |
a1d78564 RS |
5160 | } |
5161 | ||
5162 | /* OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG matcher. OTHER_REGNO is the | |
5163 | register that we need to match. */ | |
5164 | ||
a92713e6 RS |
5165 | static bfd_boolean |
5166 | match_tied_reg_operand (struct mips_arg_info *arg, unsigned int other_regno) | |
a1d78564 RS |
5167 | { |
5168 | unsigned int regno; | |
5169 | ||
a92713e6 | 5170 | return match_reg (arg, OP_REG_GP, ®no) && regno == other_regno; |
a1d78564 RS |
5171 | } |
5172 | ||
89565f1b RS |
5173 | /* Read a floating-point constant from S for LI.S or LI.D. LENGTH is |
5174 | the length of the value in bytes (4 for float, 8 for double) and | |
5175 | USING_GPRS says whether the destination is a GPR rather than an FPR. | |
5176 | ||
5177 | Return the constant in IMM and OFFSET as follows: | |
5178 | ||
5179 | - If the constant should be loaded via memory, set IMM to O_absent and | |
5180 | OFFSET to the memory address. | |
5181 | ||
5182 | - Otherwise, if the constant should be loaded into two 32-bit registers, | |
5183 | set IMM to the O_constant to load into the high register and OFFSET | |
5184 | to the corresponding value for the low register. | |
5185 | ||
5186 | - Otherwise, set IMM to the full O_constant and set OFFSET to O_absent. | |
5187 | ||
5188 | These constants only appear as the last operand in an instruction, | |
5189 | and every instruction that accepts them in any variant accepts them | |
5190 | in all variants. This means we don't have to worry about backing out | |
5191 | any changes if the instruction does not match. We just match | |
5192 | unconditionally and report an error if the constant is invalid. */ | |
5193 | ||
a92713e6 RS |
5194 | static bfd_boolean |
5195 | match_float_constant (struct mips_arg_info *arg, expressionS *imm, | |
5196 | expressionS *offset, int length, bfd_boolean using_gprs) | |
89565f1b | 5197 | { |
a92713e6 | 5198 | char *p; |
89565f1b RS |
5199 | segT seg, new_seg; |
5200 | subsegT subseg; | |
5201 | const char *newname; | |
a92713e6 | 5202 | unsigned char *data; |
89565f1b RS |
5203 | |
5204 | /* Where the constant is placed is based on how the MIPS assembler | |
5205 | does things: | |
5206 | ||
5207 | length == 4 && using_gprs -- immediate value only | |
5208 | length == 8 && using_gprs -- .rdata or immediate value | |
5209 | length == 4 && !using_gprs -- .lit4 or immediate value | |
5210 | length == 8 && !using_gprs -- .lit8 or immediate value | |
5211 | ||
5212 | The .lit4 and .lit8 sections are only used if permitted by the | |
5213 | -G argument. */ | |
a92713e6 | 5214 | if (arg->token->type != OT_FLOAT) |
1a00e612 RS |
5215 | { |
5216 | set_insn_error (arg->argnum, _("floating-point expression required")); | |
5217 | return FALSE; | |
5218 | } | |
a92713e6 RS |
5219 | |
5220 | gas_assert (arg->token->u.flt.length == length); | |
5221 | data = arg->token->u.flt.data; | |
5222 | ++arg->token; | |
89565f1b RS |
5223 | |
5224 | /* Handle 32-bit constants for which an immediate value is best. */ | |
5225 | if (length == 4 | |
5226 | && (using_gprs | |
5227 | || g_switch_value < 4 | |
5228 | || (data[0] == 0 && data[1] == 0) | |
5229 | || (data[2] == 0 && data[3] == 0))) | |
5230 | { | |
5231 | imm->X_op = O_constant; | |
5232 | if (!target_big_endian) | |
5233 | imm->X_add_number = bfd_getl32 (data); | |
5234 | else | |
5235 | imm->X_add_number = bfd_getb32 (data); | |
5236 | offset->X_op = O_absent; | |
a92713e6 | 5237 | return TRUE; |
89565f1b RS |
5238 | } |
5239 | ||
5240 | /* Handle 64-bit constants for which an immediate value is best. */ | |
5241 | if (length == 8 | |
5242 | && !mips_disable_float_construction | |
5243 | /* Constants can only be constructed in GPRs and copied | |
5244 | to FPRs if the GPRs are at least as wide as the FPRs. | |
5245 | Force the constant into memory if we are using 64-bit FPRs | |
5246 | but the GPRs are only 32 bits wide. */ | |
5247 | /* ??? No longer true with the addition of MTHC1, but this | |
5248 | is legacy code... */ | |
5249 | && (using_gprs || !(HAVE_64BIT_FPRS && HAVE_32BIT_GPRS)) | |
5250 | && ((data[0] == 0 && data[1] == 0) | |
5251 | || (data[2] == 0 && data[3] == 0)) | |
5252 | && ((data[4] == 0 && data[5] == 0) | |
5253 | || (data[6] == 0 && data[7] == 0))) | |
5254 | { | |
5255 | /* The value is simple enough to load with a couple of instructions. | |
5256 | If using 32-bit registers, set IMM to the high order 32 bits and | |
5257 | OFFSET to the low order 32 bits. Otherwise, set IMM to the entire | |
5258 | 64 bit constant. */ | |
5259 | if (using_gprs ? HAVE_32BIT_GPRS : HAVE_32BIT_FPRS) | |
5260 | { | |
5261 | imm->X_op = O_constant; | |
5262 | offset->X_op = O_constant; | |
5263 | if (!target_big_endian) | |
5264 | { | |
5265 | imm->X_add_number = bfd_getl32 (data + 4); | |
5266 | offset->X_add_number = bfd_getl32 (data); | |
5267 | } | |
5268 | else | |
5269 | { | |
5270 | imm->X_add_number = bfd_getb32 (data); | |
5271 | offset->X_add_number = bfd_getb32 (data + 4); | |
5272 | } | |
5273 | if (offset->X_add_number == 0) | |
5274 | offset->X_op = O_absent; | |
5275 | } | |
5276 | else | |
5277 | { | |
5278 | imm->X_op = O_constant; | |
5279 | if (!target_big_endian) | |
5280 | imm->X_add_number = bfd_getl64 (data); | |
5281 | else | |
5282 | imm->X_add_number = bfd_getb64 (data); | |
5283 | offset->X_op = O_absent; | |
5284 | } | |
a92713e6 | 5285 | return TRUE; |
89565f1b RS |
5286 | } |
5287 | ||
5288 | /* Switch to the right section. */ | |
5289 | seg = now_seg; | |
5290 | subseg = now_subseg; | |
5291 | if (length == 4) | |
5292 | { | |
5293 | gas_assert (!using_gprs && g_switch_value >= 4); | |
5294 | newname = ".lit4"; | |
5295 | } | |
5296 | else | |
5297 | { | |
5298 | if (using_gprs || g_switch_value < 8) | |
5299 | newname = RDATA_SECTION_NAME; | |
5300 | else | |
5301 | newname = ".lit8"; | |
5302 | } | |
5303 | ||
5304 | new_seg = subseg_new (newname, (subsegT) 0); | |
5305 | bfd_set_section_flags (stdoutput, new_seg, | |
5306 | SEC_ALLOC | SEC_LOAD | SEC_READONLY | SEC_DATA); | |
5307 | frag_align (length == 4 ? 2 : 3, 0, 0); | |
5308 | if (strncmp (TARGET_OS, "elf", 3) != 0) | |
5309 | record_alignment (new_seg, 4); | |
5310 | else | |
5311 | record_alignment (new_seg, length == 4 ? 2 : 3); | |
5312 | if (seg == now_seg) | |
1661c76c | 5313 | as_bad (_("cannot use `%s' in this section"), arg->insn->insn_mo->name); |
89565f1b RS |
5314 | |
5315 | /* Set the argument to the current address in the section. */ | |
5316 | imm->X_op = O_absent; | |
5317 | offset->X_op = O_symbol; | |
5318 | offset->X_add_symbol = symbol_temp_new_now (); | |
5319 | offset->X_add_number = 0; | |
5320 | ||
5321 | /* Put the floating point number into the section. */ | |
5322 | p = frag_more (length); | |
5323 | memcpy (p, data, length); | |
5324 | ||
5325 | /* Switch back to the original section. */ | |
5326 | subseg_set (seg, subseg); | |
a92713e6 | 5327 | return TRUE; |
89565f1b RS |
5328 | } |
5329 | ||
14daeee3 RS |
5330 | /* OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX matcher; MATCH_P selects between |
5331 | them. */ | |
5332 | ||
5333 | static bfd_boolean | |
5334 | match_vu0_suffix_operand (struct mips_arg_info *arg, | |
5335 | const struct mips_operand *operand, | |
5336 | bfd_boolean match_p) | |
5337 | { | |
5338 | unsigned int uval; | |
5339 | ||
5340 | /* The operand can be an XYZW mask or a single 2-bit channel index | |
5341 | (with X being 0). */ | |
5342 | gas_assert (operand->size == 2 || operand->size == 4); | |
5343 | ||
ee5734f0 | 5344 | /* The suffix can be omitted when it is already part of the opcode. */ |
14daeee3 | 5345 | if (arg->token->type != OT_CHANNELS) |
ee5734f0 | 5346 | return match_p; |
14daeee3 RS |
5347 | |
5348 | uval = arg->token->u.channels; | |
5349 | if (operand->size == 2) | |
5350 | { | |
5351 | /* Check that a single bit is set and convert it into a 2-bit index. */ | |
5352 | if ((uval & -uval) != uval) | |
5353 | return FALSE; | |
5354 | uval = 4 - ffs (uval); | |
5355 | } | |
5356 | ||
5357 | if (match_p && insn_extract_operand (arg->insn, operand) != uval) | |
5358 | return FALSE; | |
5359 | ||
5360 | ++arg->token; | |
5361 | if (!match_p) | |
5362 | insn_insert_operand (arg->insn, operand, uval); | |
5363 | return TRUE; | |
5364 | } | |
5365 | ||
a1d78564 RS |
5366 | /* S is the text seen for ARG. Match it against OPERAND. Return the end |
5367 | of the argument text if the match is successful, otherwise return null. */ | |
5368 | ||
a92713e6 | 5369 | static bfd_boolean |
a1d78564 | 5370 | match_operand (struct mips_arg_info *arg, |
a92713e6 | 5371 | const struct mips_operand *operand) |
a1d78564 RS |
5372 | { |
5373 | switch (operand->type) | |
5374 | { | |
5375 | case OP_INT: | |
a92713e6 | 5376 | return match_int_operand (arg, operand); |
a1d78564 RS |
5377 | |
5378 | case OP_MAPPED_INT: | |
a92713e6 | 5379 | return match_mapped_int_operand (arg, operand); |
a1d78564 RS |
5380 | |
5381 | case OP_MSB: | |
a92713e6 | 5382 | return match_msb_operand (arg, operand); |
a1d78564 RS |
5383 | |
5384 | case OP_REG: | |
0f35dbc4 | 5385 | case OP_OPTIONAL_REG: |
a92713e6 | 5386 | return match_reg_operand (arg, operand); |
a1d78564 RS |
5387 | |
5388 | case OP_REG_PAIR: | |
a92713e6 | 5389 | return match_reg_pair_operand (arg, operand); |
a1d78564 RS |
5390 | |
5391 | case OP_PCREL: | |
a92713e6 | 5392 | return match_pcrel_operand (arg); |
a1d78564 RS |
5393 | |
5394 | case OP_PERF_REG: | |
a92713e6 | 5395 | return match_perf_reg_operand (arg, operand); |
a1d78564 RS |
5396 | |
5397 | case OP_ADDIUSP_INT: | |
a92713e6 | 5398 | return match_addiusp_operand (arg, operand); |
a1d78564 RS |
5399 | |
5400 | case OP_CLO_CLZ_DEST: | |
a92713e6 | 5401 | return match_clo_clz_dest_operand (arg, operand); |
a1d78564 RS |
5402 | |
5403 | case OP_LWM_SWM_LIST: | |
a92713e6 | 5404 | return match_lwm_swm_list_operand (arg, operand); |
a1d78564 RS |
5405 | |
5406 | case OP_ENTRY_EXIT_LIST: | |
a92713e6 | 5407 | return match_entry_exit_operand (arg, operand); |
364215c8 | 5408 | |
a1d78564 | 5409 | case OP_SAVE_RESTORE_LIST: |
a92713e6 | 5410 | return match_save_restore_list_operand (arg); |
a1d78564 RS |
5411 | |
5412 | case OP_MDMX_IMM_REG: | |
a92713e6 | 5413 | return match_mdmx_imm_reg_operand (arg, operand); |
a1d78564 RS |
5414 | |
5415 | case OP_REPEAT_DEST_REG: | |
a92713e6 | 5416 | return match_tied_reg_operand (arg, arg->dest_regno); |
a1d78564 RS |
5417 | |
5418 | case OP_REPEAT_PREV_REG: | |
a92713e6 | 5419 | return match_tied_reg_operand (arg, arg->last_regno); |
a1d78564 RS |
5420 | |
5421 | case OP_PC: | |
a92713e6 | 5422 | return match_pc_operand (arg); |
14daeee3 RS |
5423 | |
5424 | case OP_VU0_SUFFIX: | |
5425 | return match_vu0_suffix_operand (arg, operand, FALSE); | |
5426 | ||
5427 | case OP_VU0_MATCH_SUFFIX: | |
5428 | return match_vu0_suffix_operand (arg, operand, TRUE); | |
a1d78564 RS |
5429 | } |
5430 | abort (); | |
5431 | } | |
5432 | ||
5433 | /* ARG is the state after successfully matching an instruction. | |
5434 | Issue any queued-up warnings. */ | |
5435 | ||
5436 | static void | |
5437 | check_completed_insn (struct mips_arg_info *arg) | |
5438 | { | |
5439 | if (arg->seen_at) | |
5440 | { | |
5441 | if (AT == ATREG) | |
1661c76c | 5442 | as_warn (_("used $at without \".set noat\"")); |
a1d78564 | 5443 | else |
1661c76c | 5444 | as_warn (_("used $%u with \".set at=$%u\""), AT, AT); |
a1d78564 RS |
5445 | } |
5446 | } | |
a1d78564 | 5447 | |
85fcb30f RS |
5448 | /* Return true if modifying general-purpose register REG needs a delay. */ |
5449 | ||
5450 | static bfd_boolean | |
5451 | reg_needs_delay (unsigned int reg) | |
5452 | { | |
5453 | unsigned long prev_pinfo; | |
5454 | ||
5455 | prev_pinfo = history[0].insn_mo->pinfo; | |
5456 | if (!mips_opts.noreorder | |
5457 | && (((prev_pinfo & INSN_LOAD_MEMORY_DELAY) && !gpr_interlocks) | |
5458 | || ((prev_pinfo & INSN_LOAD_COPROC_DELAY) && !cop_interlocks)) | |
5459 | && (gpr_write_mask (&history[0]) & (1 << reg))) | |
5460 | return TRUE; | |
5461 | ||
5462 | return FALSE; | |
5463 | } | |
5464 | ||
71400594 RS |
5465 | /* Classify an instruction according to the FIX_VR4120_* enumeration. |
5466 | Return NUM_FIX_VR4120_CLASSES if the instruction isn't affected | |
5467 | by VR4120 errata. */ | |
4d7206a2 | 5468 | |
71400594 RS |
5469 | static unsigned int |
5470 | classify_vr4120_insn (const char *name) | |
252b5132 | 5471 | { |
71400594 RS |
5472 | if (strncmp (name, "macc", 4) == 0) |
5473 | return FIX_VR4120_MACC; | |
5474 | if (strncmp (name, "dmacc", 5) == 0) | |
5475 | return FIX_VR4120_DMACC; | |
5476 | if (strncmp (name, "mult", 4) == 0) | |
5477 | return FIX_VR4120_MULT; | |
5478 | if (strncmp (name, "dmult", 5) == 0) | |
5479 | return FIX_VR4120_DMULT; | |
5480 | if (strstr (name, "div")) | |
5481 | return FIX_VR4120_DIV; | |
5482 | if (strcmp (name, "mtlo") == 0 || strcmp (name, "mthi") == 0) | |
5483 | return FIX_VR4120_MTHILO; | |
5484 | return NUM_FIX_VR4120_CLASSES; | |
5485 | } | |
252b5132 | 5486 | |
ff239038 CM |
5487 | #define INSN_ERET 0x42000018 |
5488 | #define INSN_DERET 0x4200001f | |
5489 | ||
71400594 RS |
5490 | /* Return the number of instructions that must separate INSN1 and INSN2, |
5491 | where INSN1 is the earlier instruction. Return the worst-case value | |
5492 | for any INSN2 if INSN2 is null. */ | |
252b5132 | 5493 | |
71400594 RS |
5494 | static unsigned int |
5495 | insns_between (const struct mips_cl_insn *insn1, | |
5496 | const struct mips_cl_insn *insn2) | |
5497 | { | |
5498 | unsigned long pinfo1, pinfo2; | |
4c260379 | 5499 | unsigned int mask; |
71400594 | 5500 | |
85fcb30f RS |
5501 | /* If INFO2 is null, pessimistically assume that all flags are set for |
5502 | the second instruction. */ | |
71400594 RS |
5503 | pinfo1 = insn1->insn_mo->pinfo; |
5504 | pinfo2 = insn2 ? insn2->insn_mo->pinfo : ~0U; | |
252b5132 | 5505 | |
71400594 RS |
5506 | /* For most targets, write-after-read dependencies on the HI and LO |
5507 | registers must be separated by at least two instructions. */ | |
5508 | if (!hilo_interlocks) | |
252b5132 | 5509 | { |
71400594 RS |
5510 | if ((pinfo1 & INSN_READ_LO) && (pinfo2 & INSN_WRITE_LO)) |
5511 | return 2; | |
5512 | if ((pinfo1 & INSN_READ_HI) && (pinfo2 & INSN_WRITE_HI)) | |
5513 | return 2; | |
5514 | } | |
5515 | ||
5516 | /* If we're working around r7000 errata, there must be two instructions | |
5517 | between an mfhi or mflo and any instruction that uses the result. */ | |
5518 | if (mips_7000_hilo_fix | |
df58fc94 | 5519 | && !mips_opts.micromips |
71400594 | 5520 | && MF_HILO_INSN (pinfo1) |
85fcb30f | 5521 | && (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1)))) |
71400594 RS |
5522 | return 2; |
5523 | ||
ff239038 CM |
5524 | /* If we're working around 24K errata, one instruction is required |
5525 | if an ERET or DERET is followed by a branch instruction. */ | |
df58fc94 | 5526 | if (mips_fix_24k && !mips_opts.micromips) |
ff239038 CM |
5527 | { |
5528 | if (insn1->insn_opcode == INSN_ERET | |
5529 | || insn1->insn_opcode == INSN_DERET) | |
5530 | { | |
5531 | if (insn2 == NULL | |
5532 | || insn2->insn_opcode == INSN_ERET | |
5533 | || insn2->insn_opcode == INSN_DERET | |
11625dd8 | 5534 | || delayed_branch_p (insn2)) |
ff239038 CM |
5535 | return 1; |
5536 | } | |
5537 | } | |
5538 | ||
71400594 RS |
5539 | /* If working around VR4120 errata, check for combinations that need |
5540 | a single intervening instruction. */ | |
df58fc94 | 5541 | if (mips_fix_vr4120 && !mips_opts.micromips) |
71400594 RS |
5542 | { |
5543 | unsigned int class1, class2; | |
252b5132 | 5544 | |
71400594 RS |
5545 | class1 = classify_vr4120_insn (insn1->insn_mo->name); |
5546 | if (class1 != NUM_FIX_VR4120_CLASSES && vr4120_conflicts[class1] != 0) | |
252b5132 | 5547 | { |
71400594 RS |
5548 | if (insn2 == NULL) |
5549 | return 1; | |
5550 | class2 = classify_vr4120_insn (insn2->insn_mo->name); | |
5551 | if (vr4120_conflicts[class1] & (1 << class2)) | |
5552 | return 1; | |
252b5132 | 5553 | } |
71400594 RS |
5554 | } |
5555 | ||
df58fc94 | 5556 | if (!HAVE_CODE_COMPRESSION) |
71400594 RS |
5557 | { |
5558 | /* Check for GPR or coprocessor load delays. All such delays | |
5559 | are on the RT register. */ | |
5560 | /* Itbl support may require additional care here. */ | |
5561 | if ((!gpr_interlocks && (pinfo1 & INSN_LOAD_MEMORY_DELAY)) | |
5562 | || (!cop_interlocks && (pinfo1 & INSN_LOAD_COPROC_DELAY))) | |
252b5132 | 5563 | { |
85fcb30f | 5564 | if (insn2 == NULL || (gpr_read_mask (insn2) & gpr_write_mask (insn1))) |
71400594 RS |
5565 | return 1; |
5566 | } | |
5567 | ||
5568 | /* Check for generic coprocessor hazards. | |
5569 | ||
5570 | This case is not handled very well. There is no special | |
5571 | knowledge of CP0 handling, and the coprocessors other than | |
5572 | the floating point unit are not distinguished at all. */ | |
5573 | /* Itbl support may require additional care here. FIXME! | |
5574 | Need to modify this to include knowledge about | |
5575 | user specified delays! */ | |
5576 | else if ((!cop_interlocks && (pinfo1 & INSN_COPROC_MOVE_DELAY)) | |
5577 | || (!cop_mem_interlocks && (pinfo1 & INSN_COPROC_MEMORY_DELAY))) | |
5578 | { | |
5579 | /* Handle cases where INSN1 writes to a known general coprocessor | |
5580 | register. There must be a one instruction delay before INSN2 | |
5581 | if INSN2 reads that register, otherwise no delay is needed. */ | |
4c260379 RS |
5582 | mask = fpr_write_mask (insn1); |
5583 | if (mask != 0) | |
252b5132 | 5584 | { |
4c260379 | 5585 | if (!insn2 || (mask & fpr_read_mask (insn2)) != 0) |
71400594 | 5586 | return 1; |
252b5132 RH |
5587 | } |
5588 | else | |
5589 | { | |
71400594 RS |
5590 | /* Read-after-write dependencies on the control registers |
5591 | require a two-instruction gap. */ | |
5592 | if ((pinfo1 & INSN_WRITE_COND_CODE) | |
5593 | && (pinfo2 & INSN_READ_COND_CODE)) | |
5594 | return 2; | |
5595 | ||
5596 | /* We don't know exactly what INSN1 does. If INSN2 is | |
5597 | also a coprocessor instruction, assume there must be | |
5598 | a one instruction gap. */ | |
5599 | if (pinfo2 & INSN_COP) | |
5600 | return 1; | |
252b5132 RH |
5601 | } |
5602 | } | |
6b76fefe | 5603 | |
71400594 RS |
5604 | /* Check for read-after-write dependencies on the coprocessor |
5605 | control registers in cases where INSN1 does not need a general | |
5606 | coprocessor delay. This means that INSN1 is a floating point | |
5607 | comparison instruction. */ | |
5608 | /* Itbl support may require additional care here. */ | |
5609 | else if (!cop_interlocks | |
5610 | && (pinfo1 & INSN_WRITE_COND_CODE) | |
5611 | && (pinfo2 & INSN_READ_COND_CODE)) | |
5612 | return 1; | |
5613 | } | |
6b76fefe | 5614 | |
71400594 RS |
5615 | return 0; |
5616 | } | |
6b76fefe | 5617 | |
7d8e00cf RS |
5618 | /* Return the number of nops that would be needed to work around the |
5619 | VR4130 mflo/mfhi errata if instruction INSN immediately followed | |
932d1a1b RS |
5620 | the MAX_VR4130_NOPS instructions described by HIST. Ignore hazards |
5621 | that are contained within the first IGNORE instructions of HIST. */ | |
7d8e00cf RS |
5622 | |
5623 | static int | |
932d1a1b | 5624 | nops_for_vr4130 (int ignore, const struct mips_cl_insn *hist, |
7d8e00cf RS |
5625 | const struct mips_cl_insn *insn) |
5626 | { | |
4c260379 RS |
5627 | int i, j; |
5628 | unsigned int mask; | |
7d8e00cf RS |
5629 | |
5630 | /* Check if the instruction writes to HI or LO. MTHI and MTLO | |
5631 | are not affected by the errata. */ | |
5632 | if (insn != 0 | |
5633 | && ((insn->insn_mo->pinfo & (INSN_WRITE_HI | INSN_WRITE_LO)) == 0 | |
5634 | || strcmp (insn->insn_mo->name, "mtlo") == 0 | |
5635 | || strcmp (insn->insn_mo->name, "mthi") == 0)) | |
5636 | return 0; | |
5637 | ||
5638 | /* Search for the first MFLO or MFHI. */ | |
5639 | for (i = 0; i < MAX_VR4130_NOPS; i++) | |
91d6fa6a | 5640 | if (MF_HILO_INSN (hist[i].insn_mo->pinfo)) |
7d8e00cf RS |
5641 | { |
5642 | /* Extract the destination register. */ | |
4c260379 | 5643 | mask = gpr_write_mask (&hist[i]); |
7d8e00cf RS |
5644 | |
5645 | /* No nops are needed if INSN reads that register. */ | |
4c260379 | 5646 | if (insn != NULL && (gpr_read_mask (insn) & mask) != 0) |
7d8e00cf RS |
5647 | return 0; |
5648 | ||
5649 | /* ...or if any of the intervening instructions do. */ | |
5650 | for (j = 0; j < i; j++) | |
4c260379 | 5651 | if (gpr_read_mask (&hist[j]) & mask) |
7d8e00cf RS |
5652 | return 0; |
5653 | ||
932d1a1b RS |
5654 | if (i >= ignore) |
5655 | return MAX_VR4130_NOPS - i; | |
7d8e00cf RS |
5656 | } |
5657 | return 0; | |
5658 | } | |
5659 | ||
15be625d CM |
5660 | #define BASE_REG_EQ(INSN1, INSN2) \ |
5661 | ((((INSN1) >> OP_SH_RS) & OP_MASK_RS) \ | |
5662 | == (((INSN2) >> OP_SH_RS) & OP_MASK_RS)) | |
5663 | ||
5664 | /* Return the minimum alignment for this store instruction. */ | |
5665 | ||
5666 | static int | |
5667 | fix_24k_align_to (const struct mips_opcode *mo) | |
5668 | { | |
5669 | if (strcmp (mo->name, "sh") == 0) | |
5670 | return 2; | |
5671 | ||
5672 | if (strcmp (mo->name, "swc1") == 0 | |
5673 | || strcmp (mo->name, "swc2") == 0 | |
5674 | || strcmp (mo->name, "sw") == 0 | |
5675 | || strcmp (mo->name, "sc") == 0 | |
5676 | || strcmp (mo->name, "s.s") == 0) | |
5677 | return 4; | |
5678 | ||
5679 | if (strcmp (mo->name, "sdc1") == 0 | |
5680 | || strcmp (mo->name, "sdc2") == 0 | |
5681 | || strcmp (mo->name, "s.d") == 0) | |
5682 | return 8; | |
5683 | ||
5684 | /* sb, swl, swr */ | |
5685 | return 1; | |
5686 | } | |
5687 | ||
5688 | struct fix_24k_store_info | |
5689 | { | |
5690 | /* Immediate offset, if any, for this store instruction. */ | |
5691 | short off; | |
5692 | /* Alignment required by this store instruction. */ | |
5693 | int align_to; | |
5694 | /* True for register offsets. */ | |
5695 | int register_offset; | |
5696 | }; | |
5697 | ||
5698 | /* Comparison function used by qsort. */ | |
5699 | ||
5700 | static int | |
5701 | fix_24k_sort (const void *a, const void *b) | |
5702 | { | |
5703 | const struct fix_24k_store_info *pos1 = a; | |
5704 | const struct fix_24k_store_info *pos2 = b; | |
5705 | ||
5706 | return (pos1->off - pos2->off); | |
5707 | } | |
5708 | ||
5709 | /* INSN is a store instruction. Try to record the store information | |
5710 | in STINFO. Return false if the information isn't known. */ | |
5711 | ||
5712 | static bfd_boolean | |
5713 | fix_24k_record_store_info (struct fix_24k_store_info *stinfo, | |
ab9794cf | 5714 | const struct mips_cl_insn *insn) |
15be625d CM |
5715 | { |
5716 | /* The instruction must have a known offset. */ | |
5717 | if (!insn->complete_p || !strstr (insn->insn_mo->args, "o(")) | |
5718 | return FALSE; | |
5719 | ||
5720 | stinfo->off = (insn->insn_opcode >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE; | |
5721 | stinfo->align_to = fix_24k_align_to (insn->insn_mo); | |
5722 | return TRUE; | |
5723 | } | |
5724 | ||
932d1a1b RS |
5725 | /* Return the number of nops that would be needed to work around the 24k |
5726 | "lost data on stores during refill" errata if instruction INSN | |
5727 | immediately followed the 2 instructions described by HIST. | |
5728 | Ignore hazards that are contained within the first IGNORE | |
5729 | instructions of HIST. | |
5730 | ||
5731 | Problem: The FSB (fetch store buffer) acts as an intermediate buffer | |
5732 | for the data cache refills and store data. The following describes | |
5733 | the scenario where the store data could be lost. | |
5734 | ||
5735 | * A data cache miss, due to either a load or a store, causing fill | |
5736 | data to be supplied by the memory subsystem | |
5737 | * The first three doublewords of fill data are returned and written | |
5738 | into the cache | |
5739 | * A sequence of four stores occurs in consecutive cycles around the | |
5740 | final doubleword of the fill: | |
5741 | * Store A | |
5742 | * Store B | |
5743 | * Store C | |
5744 | * Zero, One or more instructions | |
5745 | * Store D | |
5746 | ||
5747 | The four stores A-D must be to different doublewords of the line that | |
5748 | is being filled. The fourth instruction in the sequence above permits | |
5749 | the fill of the final doubleword to be transferred from the FSB into | |
5750 | the cache. In the sequence above, the stores may be either integer | |
5751 | (sb, sh, sw, swr, swl, sc) or coprocessor (swc1/swc2, sdc1/sdc2, | |
5752 | swxc1, sdxc1, suxc1) stores, as long as the four stores are to | |
5753 | different doublewords on the line. If the floating point unit is | |
5754 | running in 1:2 mode, it is not possible to create the sequence above | |
5755 | using only floating point store instructions. | |
15be625d CM |
5756 | |
5757 | In this case, the cache line being filled is incorrectly marked | |
5758 | invalid, thereby losing the data from any store to the line that | |
5759 | occurs between the original miss and the completion of the five | |
5760 | cycle sequence shown above. | |
5761 | ||
932d1a1b | 5762 | The workarounds are: |
15be625d | 5763 | |
932d1a1b RS |
5764 | * Run the data cache in write-through mode. |
5765 | * Insert a non-store instruction between | |
5766 | Store A and Store B or Store B and Store C. */ | |
15be625d CM |
5767 | |
5768 | static int | |
932d1a1b | 5769 | nops_for_24k (int ignore, const struct mips_cl_insn *hist, |
15be625d CM |
5770 | const struct mips_cl_insn *insn) |
5771 | { | |
5772 | struct fix_24k_store_info pos[3]; | |
5773 | int align, i, base_offset; | |
5774 | ||
932d1a1b RS |
5775 | if (ignore >= 2) |
5776 | return 0; | |
5777 | ||
ab9794cf RS |
5778 | /* If the previous instruction wasn't a store, there's nothing to |
5779 | worry about. */ | |
15be625d CM |
5780 | if ((hist[0].insn_mo->pinfo & INSN_STORE_MEMORY) == 0) |
5781 | return 0; | |
5782 | ||
ab9794cf RS |
5783 | /* If the instructions after the previous one are unknown, we have |
5784 | to assume the worst. */ | |
5785 | if (!insn) | |
15be625d CM |
5786 | return 1; |
5787 | ||
ab9794cf RS |
5788 | /* Check whether we are dealing with three consecutive stores. */ |
5789 | if ((insn->insn_mo->pinfo & INSN_STORE_MEMORY) == 0 | |
5790 | || (hist[1].insn_mo->pinfo & INSN_STORE_MEMORY) == 0) | |
15be625d CM |
5791 | return 0; |
5792 | ||
5793 | /* If we don't know the relationship between the store addresses, | |
5794 | assume the worst. */ | |
ab9794cf | 5795 | if (!BASE_REG_EQ (insn->insn_opcode, hist[0].insn_opcode) |
15be625d CM |
5796 | || !BASE_REG_EQ (insn->insn_opcode, hist[1].insn_opcode)) |
5797 | return 1; | |
5798 | ||
5799 | if (!fix_24k_record_store_info (&pos[0], insn) | |
5800 | || !fix_24k_record_store_info (&pos[1], &hist[0]) | |
5801 | || !fix_24k_record_store_info (&pos[2], &hist[1])) | |
5802 | return 1; | |
5803 | ||
5804 | qsort (&pos, 3, sizeof (struct fix_24k_store_info), fix_24k_sort); | |
5805 | ||
5806 | /* Pick a value of ALIGN and X such that all offsets are adjusted by | |
5807 | X bytes and such that the base register + X is known to be aligned | |
5808 | to align bytes. */ | |
5809 | ||
5810 | if (((insn->insn_opcode >> OP_SH_RS) & OP_MASK_RS) == SP) | |
5811 | align = 8; | |
5812 | else | |
5813 | { | |
5814 | align = pos[0].align_to; | |
5815 | base_offset = pos[0].off; | |
5816 | for (i = 1; i < 3; i++) | |
5817 | if (align < pos[i].align_to) | |
5818 | { | |
5819 | align = pos[i].align_to; | |
5820 | base_offset = pos[i].off; | |
5821 | } | |
5822 | for (i = 0; i < 3; i++) | |
5823 | pos[i].off -= base_offset; | |
5824 | } | |
5825 | ||
5826 | pos[0].off &= ~align + 1; | |
5827 | pos[1].off &= ~align + 1; | |
5828 | pos[2].off &= ~align + 1; | |
5829 | ||
5830 | /* If any two stores write to the same chunk, they also write to the | |
5831 | same doubleword. The offsets are still sorted at this point. */ | |
5832 | if (pos[0].off == pos[1].off || pos[1].off == pos[2].off) | |
5833 | return 0; | |
5834 | ||
5835 | /* A range of at least 9 bytes is needed for the stores to be in | |
5836 | non-overlapping doublewords. */ | |
5837 | if (pos[2].off - pos[0].off <= 8) | |
5838 | return 0; | |
5839 | ||
5840 | if (pos[2].off - pos[1].off >= 24 | |
5841 | || pos[1].off - pos[0].off >= 24 | |
5842 | || pos[2].off - pos[0].off >= 32) | |
5843 | return 0; | |
5844 | ||
5845 | return 1; | |
5846 | } | |
5847 | ||
71400594 | 5848 | /* Return the number of nops that would be needed if instruction INSN |
91d6fa6a | 5849 | immediately followed the MAX_NOPS instructions given by HIST, |
932d1a1b RS |
5850 | where HIST[0] is the most recent instruction. Ignore hazards |
5851 | between INSN and the first IGNORE instructions in HIST. | |
5852 | ||
5853 | If INSN is null, return the worse-case number of nops for any | |
5854 | instruction. */ | |
bdaaa2e1 | 5855 | |
71400594 | 5856 | static int |
932d1a1b | 5857 | nops_for_insn (int ignore, const struct mips_cl_insn *hist, |
71400594 RS |
5858 | const struct mips_cl_insn *insn) |
5859 | { | |
5860 | int i, nops, tmp_nops; | |
bdaaa2e1 | 5861 | |
71400594 | 5862 | nops = 0; |
932d1a1b | 5863 | for (i = ignore; i < MAX_DELAY_NOPS; i++) |
65b02341 | 5864 | { |
91d6fa6a | 5865 | tmp_nops = insns_between (hist + i, insn) - i; |
65b02341 RS |
5866 | if (tmp_nops > nops) |
5867 | nops = tmp_nops; | |
5868 | } | |
7d8e00cf | 5869 | |
df58fc94 | 5870 | if (mips_fix_vr4130 && !mips_opts.micromips) |
7d8e00cf | 5871 | { |
932d1a1b | 5872 | tmp_nops = nops_for_vr4130 (ignore, hist, insn); |
7d8e00cf RS |
5873 | if (tmp_nops > nops) |
5874 | nops = tmp_nops; | |
5875 | } | |
5876 | ||
df58fc94 | 5877 | if (mips_fix_24k && !mips_opts.micromips) |
15be625d | 5878 | { |
932d1a1b | 5879 | tmp_nops = nops_for_24k (ignore, hist, insn); |
15be625d CM |
5880 | if (tmp_nops > nops) |
5881 | nops = tmp_nops; | |
5882 | } | |
5883 | ||
71400594 RS |
5884 | return nops; |
5885 | } | |
252b5132 | 5886 | |
71400594 | 5887 | /* The variable arguments provide NUM_INSNS extra instructions that |
91d6fa6a | 5888 | might be added to HIST. Return the largest number of nops that |
932d1a1b RS |
5889 | would be needed after the extended sequence, ignoring hazards |
5890 | in the first IGNORE instructions. */ | |
252b5132 | 5891 | |
71400594 | 5892 | static int |
932d1a1b RS |
5893 | nops_for_sequence (int num_insns, int ignore, |
5894 | const struct mips_cl_insn *hist, ...) | |
71400594 RS |
5895 | { |
5896 | va_list args; | |
5897 | struct mips_cl_insn buffer[MAX_NOPS]; | |
5898 | struct mips_cl_insn *cursor; | |
5899 | int nops; | |
5900 | ||
91d6fa6a | 5901 | va_start (args, hist); |
71400594 | 5902 | cursor = buffer + num_insns; |
91d6fa6a | 5903 | memcpy (cursor, hist, (MAX_NOPS - num_insns) * sizeof (*cursor)); |
71400594 RS |
5904 | while (cursor > buffer) |
5905 | *--cursor = *va_arg (args, const struct mips_cl_insn *); | |
5906 | ||
932d1a1b | 5907 | nops = nops_for_insn (ignore, buffer, NULL); |
71400594 RS |
5908 | va_end (args); |
5909 | return nops; | |
5910 | } | |
252b5132 | 5911 | |
71400594 RS |
5912 | /* Like nops_for_insn, but if INSN is a branch, take into account the |
5913 | worst-case delay for the branch target. */ | |
252b5132 | 5914 | |
71400594 | 5915 | static int |
932d1a1b | 5916 | nops_for_insn_or_target (int ignore, const struct mips_cl_insn *hist, |
71400594 RS |
5917 | const struct mips_cl_insn *insn) |
5918 | { | |
5919 | int nops, tmp_nops; | |
60b63b72 | 5920 | |
932d1a1b | 5921 | nops = nops_for_insn (ignore, hist, insn); |
11625dd8 | 5922 | if (delayed_branch_p (insn)) |
71400594 | 5923 | { |
932d1a1b | 5924 | tmp_nops = nops_for_sequence (2, ignore ? ignore + 2 : 0, |
14fe068b | 5925 | hist, insn, get_delay_slot_nop (insn)); |
71400594 RS |
5926 | if (tmp_nops > nops) |
5927 | nops = tmp_nops; | |
5928 | } | |
11625dd8 | 5929 | else if (compact_branch_p (insn)) |
71400594 | 5930 | { |
932d1a1b | 5931 | tmp_nops = nops_for_sequence (1, ignore ? ignore + 1 : 0, hist, insn); |
71400594 RS |
5932 | if (tmp_nops > nops) |
5933 | nops = tmp_nops; | |
5934 | } | |
5935 | return nops; | |
5936 | } | |
5937 | ||
c67a084a NC |
5938 | /* Fix NOP issue: Replace nops by "or at,at,zero". */ |
5939 | ||
5940 | static void | |
5941 | fix_loongson2f_nop (struct mips_cl_insn * ip) | |
5942 | { | |
df58fc94 | 5943 | gas_assert (!HAVE_CODE_COMPRESSION); |
c67a084a NC |
5944 | if (strcmp (ip->insn_mo->name, "nop") == 0) |
5945 | ip->insn_opcode = LOONGSON2F_NOP_INSN; | |
5946 | } | |
5947 | ||
5948 | /* Fix Jump Issue: Eliminate instruction fetch from outside 256M region | |
5949 | jr target pc &= 'hffff_ffff_cfff_ffff. */ | |
5950 | ||
5951 | static void | |
5952 | fix_loongson2f_jump (struct mips_cl_insn * ip) | |
5953 | { | |
df58fc94 | 5954 | gas_assert (!HAVE_CODE_COMPRESSION); |
c67a084a NC |
5955 | if (strcmp (ip->insn_mo->name, "j") == 0 |
5956 | || strcmp (ip->insn_mo->name, "jr") == 0 | |
5957 | || strcmp (ip->insn_mo->name, "jalr") == 0) | |
5958 | { | |
5959 | int sreg; | |
5960 | expressionS ep; | |
5961 | ||
5962 | if (! mips_opts.at) | |
5963 | return; | |
5964 | ||
df58fc94 | 5965 | sreg = EXTRACT_OPERAND (0, RS, *ip); |
c67a084a NC |
5966 | if (sreg == ZERO || sreg == KT0 || sreg == KT1 || sreg == ATREG) |
5967 | return; | |
5968 | ||
5969 | ep.X_op = O_constant; | |
5970 | ep.X_add_number = 0xcfff0000; | |
5971 | macro_build (&ep, "lui", "t,u", ATREG, BFD_RELOC_HI16); | |
5972 | ep.X_add_number = 0xffff; | |
5973 | macro_build (&ep, "ori", "t,r,i", ATREG, ATREG, BFD_RELOC_LO16); | |
5974 | macro_build (NULL, "and", "d,v,t", sreg, sreg, ATREG); | |
5975 | } | |
5976 | } | |
5977 | ||
5978 | static void | |
5979 | fix_loongson2f (struct mips_cl_insn * ip) | |
5980 | { | |
5981 | if (mips_fix_loongson2f_nop) | |
5982 | fix_loongson2f_nop (ip); | |
5983 | ||
5984 | if (mips_fix_loongson2f_jump) | |
5985 | fix_loongson2f_jump (ip); | |
5986 | } | |
5987 | ||
a4e06468 RS |
5988 | /* IP is a branch that has a delay slot, and we need to fill it |
5989 | automatically. Return true if we can do that by swapping IP | |
e407c74b NC |
5990 | with the previous instruction. |
5991 | ADDRESS_EXPR is an operand of the instruction to be used with | |
5992 | RELOC_TYPE. */ | |
a4e06468 RS |
5993 | |
5994 | static bfd_boolean | |
e407c74b | 5995 | can_swap_branch_p (struct mips_cl_insn *ip, expressionS *address_expr, |
26545944 | 5996 | bfd_reloc_code_real_type *reloc_type) |
a4e06468 | 5997 | { |
2b0c8b40 | 5998 | unsigned long pinfo, pinfo2, prev_pinfo, prev_pinfo2; |
a4e06468 RS |
5999 | unsigned int gpr_read, gpr_write, prev_gpr_read, prev_gpr_write; |
6000 | ||
6001 | /* -O2 and above is required for this optimization. */ | |
6002 | if (mips_optimize < 2) | |
6003 | return FALSE; | |
6004 | ||
6005 | /* If we have seen .set volatile or .set nomove, don't optimize. */ | |
6006 | if (mips_opts.nomove) | |
6007 | return FALSE; | |
6008 | ||
6009 | /* We can't swap if the previous instruction's position is fixed. */ | |
6010 | if (history[0].fixed_p) | |
6011 | return FALSE; | |
6012 | ||
6013 | /* If the previous previous insn was in a .set noreorder, we can't | |
6014 | swap. Actually, the MIPS assembler will swap in this situation. | |
6015 | However, gcc configured -with-gnu-as will generate code like | |
6016 | ||
6017 | .set noreorder | |
6018 | lw $4,XXX | |
6019 | .set reorder | |
6020 | INSN | |
6021 | bne $4,$0,foo | |
6022 | ||
6023 | in which we can not swap the bne and INSN. If gcc is not configured | |
6024 | -with-gnu-as, it does not output the .set pseudo-ops. */ | |
6025 | if (history[1].noreorder_p) | |
6026 | return FALSE; | |
6027 | ||
87333bb7 MR |
6028 | /* If the previous instruction had a fixup in mips16 mode, we can not swap. |
6029 | This means that the previous instruction was a 4-byte one anyhow. */ | |
a4e06468 RS |
6030 | if (mips_opts.mips16 && history[0].fixp[0]) |
6031 | return FALSE; | |
6032 | ||
6033 | /* If the branch is itself the target of a branch, we can not swap. | |
6034 | We cheat on this; all we check for is whether there is a label on | |
6035 | this instruction. If there are any branches to anything other than | |
6036 | a label, users must use .set noreorder. */ | |
6037 | if (seg_info (now_seg)->label_list) | |
6038 | return FALSE; | |
6039 | ||
6040 | /* If the previous instruction is in a variant frag other than this | |
2309ddf2 | 6041 | branch's one, we cannot do the swap. This does not apply to |
9301f9c3 MR |
6042 | MIPS16 code, which uses variant frags for different purposes. */ |
6043 | if (!mips_opts.mips16 | |
a4e06468 RS |
6044 | && history[0].frag |
6045 | && history[0].frag->fr_type == rs_machine_dependent) | |
6046 | return FALSE; | |
6047 | ||
bcd530a7 RS |
6048 | /* We do not swap with instructions that cannot architecturally |
6049 | be placed in a branch delay slot, such as SYNC or ERET. We | |
6050 | also refrain from swapping with a trap instruction, since it | |
6051 | complicates trap handlers to have the trap instruction be in | |
6052 | a delay slot. */ | |
a4e06468 | 6053 | prev_pinfo = history[0].insn_mo->pinfo; |
bcd530a7 | 6054 | if (prev_pinfo & INSN_NO_DELAY_SLOT) |
a4e06468 RS |
6055 | return FALSE; |
6056 | ||
6057 | /* Check for conflicts between the branch and the instructions | |
6058 | before the candidate delay slot. */ | |
6059 | if (nops_for_insn (0, history + 1, ip) > 0) | |
6060 | return FALSE; | |
6061 | ||
6062 | /* Check for conflicts between the swapped sequence and the | |
6063 | target of the branch. */ | |
6064 | if (nops_for_sequence (2, 0, history + 1, ip, history) > 0) | |
6065 | return FALSE; | |
6066 | ||
6067 | /* If the branch reads a register that the previous | |
6068 | instruction sets, we can not swap. */ | |
6069 | gpr_read = gpr_read_mask (ip); | |
6070 | prev_gpr_write = gpr_write_mask (&history[0]); | |
6071 | if (gpr_read & prev_gpr_write) | |
6072 | return FALSE; | |
6073 | ||
6074 | /* If the branch writes a register that the previous | |
6075 | instruction sets, we can not swap. */ | |
6076 | gpr_write = gpr_write_mask (ip); | |
6077 | if (gpr_write & prev_gpr_write) | |
6078 | return FALSE; | |
6079 | ||
6080 | /* If the branch writes a register that the previous | |
6081 | instruction reads, we can not swap. */ | |
6082 | prev_gpr_read = gpr_read_mask (&history[0]); | |
6083 | if (gpr_write & prev_gpr_read) | |
6084 | return FALSE; | |
6085 | ||
6086 | /* If one instruction sets a condition code and the | |
6087 | other one uses a condition code, we can not swap. */ | |
6088 | pinfo = ip->insn_mo->pinfo; | |
6089 | if ((pinfo & INSN_READ_COND_CODE) | |
6090 | && (prev_pinfo & INSN_WRITE_COND_CODE)) | |
6091 | return FALSE; | |
6092 | if ((pinfo & INSN_WRITE_COND_CODE) | |
6093 | && (prev_pinfo & INSN_READ_COND_CODE)) | |
6094 | return FALSE; | |
6095 | ||
6096 | /* If the previous instruction uses the PC, we can not swap. */ | |
2b0c8b40 | 6097 | prev_pinfo2 = history[0].insn_mo->pinfo2; |
26545944 | 6098 | if (prev_pinfo2 & INSN2_READ_PC) |
2b0c8b40 | 6099 | return FALSE; |
a4e06468 | 6100 | |
df58fc94 RS |
6101 | /* If the previous instruction has an incorrect size for a fixed |
6102 | branch delay slot in microMIPS mode, we cannot swap. */ | |
2309ddf2 MR |
6103 | pinfo2 = ip->insn_mo->pinfo2; |
6104 | if (mips_opts.micromips | |
6105 | && (pinfo2 & INSN2_BRANCH_DELAY_16BIT) | |
6106 | && insn_length (history) != 2) | |
6107 | return FALSE; | |
6108 | if (mips_opts.micromips | |
6109 | && (pinfo2 & INSN2_BRANCH_DELAY_32BIT) | |
6110 | && insn_length (history) != 4) | |
6111 | return FALSE; | |
6112 | ||
e407c74b NC |
6113 | /* On R5900 short loops need to be fixed by inserting a nop in |
6114 | the branch delay slots. | |
6115 | A short loop can be terminated too early. */ | |
6116 | if (mips_opts.arch == CPU_R5900 | |
6117 | /* Check if instruction has a parameter, ignore "j $31". */ | |
6118 | && (address_expr != NULL) | |
6119 | /* Parameter must be 16 bit. */ | |
6120 | && (*reloc_type == BFD_RELOC_16_PCREL_S2) | |
6121 | /* Branch to same segment. */ | |
6122 | && (S_GET_SEGMENT(address_expr->X_add_symbol) == now_seg) | |
6123 | /* Branch to same code fragment. */ | |
6124 | && (symbol_get_frag(address_expr->X_add_symbol) == frag_now) | |
6125 | /* Can only calculate branch offset if value is known. */ | |
6126 | && symbol_constant_p(address_expr->X_add_symbol) | |
6127 | /* Check if branch is really conditional. */ | |
6128 | && !((ip->insn_opcode & 0xffff0000) == 0x10000000 /* beq $0,$0 */ | |
6129 | || (ip->insn_opcode & 0xffff0000) == 0x04010000 /* bgez $0 */ | |
6130 | || (ip->insn_opcode & 0xffff0000) == 0x04110000)) /* bgezal $0 */ | |
6131 | { | |
6132 | int distance; | |
6133 | /* Check if loop is shorter than 6 instructions including | |
6134 | branch and delay slot. */ | |
6135 | distance = frag_now_fix() - S_GET_VALUE(address_expr->X_add_symbol); | |
6136 | if (distance <= 20) | |
6137 | { | |
6138 | int i; | |
6139 | int rv; | |
6140 | ||
6141 | rv = FALSE; | |
6142 | /* When the loop includes branches or jumps, | |
6143 | it is not a short loop. */ | |
6144 | for (i = 0; i < (distance / 4); i++) | |
6145 | { | |
6146 | if ((history[i].cleared_p) | |
6147 | || delayed_branch_p(&history[i])) | |
6148 | { | |
6149 | rv = TRUE; | |
6150 | break; | |
6151 | } | |
6152 | } | |
6153 | if (rv == FALSE) | |
6154 | { | |
6155 | /* Insert nop after branch to fix short loop. */ | |
6156 | return FALSE; | |
6157 | } | |
6158 | } | |
6159 | } | |
6160 | ||
a4e06468 RS |
6161 | return TRUE; |
6162 | } | |
6163 | ||
e407c74b NC |
6164 | /* Decide how we should add IP to the instruction stream. |
6165 | ADDRESS_EXPR is an operand of the instruction to be used with | |
6166 | RELOC_TYPE. */ | |
a4e06468 RS |
6167 | |
6168 | static enum append_method | |
e407c74b | 6169 | get_append_method (struct mips_cl_insn *ip, expressionS *address_expr, |
26545944 | 6170 | bfd_reloc_code_real_type *reloc_type) |
a4e06468 | 6171 | { |
a4e06468 RS |
6172 | /* The relaxed version of a macro sequence must be inherently |
6173 | hazard-free. */ | |
6174 | if (mips_relax.sequence == 2) | |
6175 | return APPEND_ADD; | |
6176 | ||
6177 | /* We must not dabble with instructions in a ".set norerorder" block. */ | |
6178 | if (mips_opts.noreorder) | |
6179 | return APPEND_ADD; | |
6180 | ||
6181 | /* Otherwise, it's our responsibility to fill branch delay slots. */ | |
11625dd8 | 6182 | if (delayed_branch_p (ip)) |
a4e06468 | 6183 | { |
e407c74b NC |
6184 | if (!branch_likely_p (ip) |
6185 | && can_swap_branch_p (ip, address_expr, reloc_type)) | |
a4e06468 RS |
6186 | return APPEND_SWAP; |
6187 | ||
6188 | if (mips_opts.mips16 | |
6189 | && ISA_SUPPORTS_MIPS16E | |
fc76e730 | 6190 | && gpr_read_mask (ip) != 0) |
a4e06468 RS |
6191 | return APPEND_ADD_COMPACT; |
6192 | ||
6193 | return APPEND_ADD_WITH_NOP; | |
6194 | } | |
6195 | ||
a4e06468 RS |
6196 | return APPEND_ADD; |
6197 | } | |
6198 | ||
ceb94aa5 RS |
6199 | /* IP is a MIPS16 instruction whose opcode we have just changed. |
6200 | Point IP->insn_mo to the new opcode's definition. */ | |
6201 | ||
6202 | static void | |
6203 | find_altered_mips16_opcode (struct mips_cl_insn *ip) | |
6204 | { | |
6205 | const struct mips_opcode *mo, *end; | |
6206 | ||
6207 | end = &mips16_opcodes[bfd_mips16_num_opcodes]; | |
6208 | for (mo = ip->insn_mo; mo < end; mo++) | |
6209 | if ((ip->insn_opcode & mo->mask) == mo->match) | |
6210 | { | |
6211 | ip->insn_mo = mo; | |
6212 | return; | |
6213 | } | |
6214 | abort (); | |
6215 | } | |
6216 | ||
df58fc94 RS |
6217 | /* For microMIPS macros, we need to generate a local number label |
6218 | as the target of branches. */ | |
6219 | #define MICROMIPS_LABEL_CHAR '\037' | |
6220 | static unsigned long micromips_target_label; | |
6221 | static char micromips_target_name[32]; | |
6222 | ||
6223 | static char * | |
6224 | micromips_label_name (void) | |
6225 | { | |
6226 | char *p = micromips_target_name; | |
6227 | char symbol_name_temporary[24]; | |
6228 | unsigned long l; | |
6229 | int i; | |
6230 | ||
6231 | if (*p) | |
6232 | return p; | |
6233 | ||
6234 | i = 0; | |
6235 | l = micromips_target_label; | |
6236 | #ifdef LOCAL_LABEL_PREFIX | |
6237 | *p++ = LOCAL_LABEL_PREFIX; | |
6238 | #endif | |
6239 | *p++ = 'L'; | |
6240 | *p++ = MICROMIPS_LABEL_CHAR; | |
6241 | do | |
6242 | { | |
6243 | symbol_name_temporary[i++] = l % 10 + '0'; | |
6244 | l /= 10; | |
6245 | } | |
6246 | while (l != 0); | |
6247 | while (i > 0) | |
6248 | *p++ = symbol_name_temporary[--i]; | |
6249 | *p = '\0'; | |
6250 | ||
6251 | return micromips_target_name; | |
6252 | } | |
6253 | ||
6254 | static void | |
6255 | micromips_label_expr (expressionS *label_expr) | |
6256 | { | |
6257 | label_expr->X_op = O_symbol; | |
6258 | label_expr->X_add_symbol = symbol_find_or_make (micromips_label_name ()); | |
6259 | label_expr->X_add_number = 0; | |
6260 | } | |
6261 | ||
6262 | static void | |
6263 | micromips_label_inc (void) | |
6264 | { | |
6265 | micromips_target_label++; | |
6266 | *micromips_target_name = '\0'; | |
6267 | } | |
6268 | ||
6269 | static void | |
6270 | micromips_add_label (void) | |
6271 | { | |
6272 | symbolS *s; | |
6273 | ||
6274 | s = colon (micromips_label_name ()); | |
6275 | micromips_label_inc (); | |
f3ded42a | 6276 | S_SET_OTHER (s, ELF_ST_SET_MICROMIPS (S_GET_OTHER (s))); |
df58fc94 RS |
6277 | } |
6278 | ||
6279 | /* If assembling microMIPS code, then return the microMIPS reloc | |
6280 | corresponding to the requested one if any. Otherwise return | |
6281 | the reloc unchanged. */ | |
6282 | ||
6283 | static bfd_reloc_code_real_type | |
6284 | micromips_map_reloc (bfd_reloc_code_real_type reloc) | |
6285 | { | |
6286 | static const bfd_reloc_code_real_type relocs[][2] = | |
6287 | { | |
6288 | /* Keep sorted incrementally by the left-hand key. */ | |
6289 | { BFD_RELOC_16_PCREL_S2, BFD_RELOC_MICROMIPS_16_PCREL_S1 }, | |
6290 | { BFD_RELOC_GPREL16, BFD_RELOC_MICROMIPS_GPREL16 }, | |
6291 | { BFD_RELOC_MIPS_JMP, BFD_RELOC_MICROMIPS_JMP }, | |
6292 | { BFD_RELOC_HI16, BFD_RELOC_MICROMIPS_HI16 }, | |
6293 | { BFD_RELOC_HI16_S, BFD_RELOC_MICROMIPS_HI16_S }, | |
6294 | { BFD_RELOC_LO16, BFD_RELOC_MICROMIPS_LO16 }, | |
6295 | { BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MICROMIPS_LITERAL }, | |
6296 | { BFD_RELOC_MIPS_GOT16, BFD_RELOC_MICROMIPS_GOT16 }, | |
6297 | { BFD_RELOC_MIPS_CALL16, BFD_RELOC_MICROMIPS_CALL16 }, | |
6298 | { BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MICROMIPS_GOT_HI16 }, | |
6299 | { BFD_RELOC_MIPS_GOT_LO16, BFD_RELOC_MICROMIPS_GOT_LO16 }, | |
6300 | { BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MICROMIPS_CALL_HI16 }, | |
6301 | { BFD_RELOC_MIPS_CALL_LO16, BFD_RELOC_MICROMIPS_CALL_LO16 }, | |
6302 | { BFD_RELOC_MIPS_SUB, BFD_RELOC_MICROMIPS_SUB }, | |
6303 | { BFD_RELOC_MIPS_GOT_PAGE, BFD_RELOC_MICROMIPS_GOT_PAGE }, | |
6304 | { BFD_RELOC_MIPS_GOT_OFST, BFD_RELOC_MICROMIPS_GOT_OFST }, | |
6305 | { BFD_RELOC_MIPS_GOT_DISP, BFD_RELOC_MICROMIPS_GOT_DISP }, | |
6306 | { BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MICROMIPS_HIGHEST }, | |
6307 | { BFD_RELOC_MIPS_HIGHER, BFD_RELOC_MICROMIPS_HIGHER }, | |
6308 | { BFD_RELOC_MIPS_SCN_DISP, BFD_RELOC_MICROMIPS_SCN_DISP }, | |
6309 | { BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MICROMIPS_TLS_GD }, | |
6310 | { BFD_RELOC_MIPS_TLS_LDM, BFD_RELOC_MICROMIPS_TLS_LDM }, | |
6311 | { BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16 }, | |
6312 | { BFD_RELOC_MIPS_TLS_DTPREL_LO16, BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16 }, | |
6313 | { BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MICROMIPS_TLS_GOTTPREL }, | |
6314 | { BFD_RELOC_MIPS_TLS_TPREL_HI16, BFD_RELOC_MICROMIPS_TLS_TPREL_HI16 }, | |
6315 | { BFD_RELOC_MIPS_TLS_TPREL_LO16, BFD_RELOC_MICROMIPS_TLS_TPREL_LO16 } | |
6316 | }; | |
6317 | bfd_reloc_code_real_type r; | |
6318 | size_t i; | |
6319 | ||
6320 | if (!mips_opts.micromips) | |
6321 | return reloc; | |
6322 | for (i = 0; i < ARRAY_SIZE (relocs); i++) | |
6323 | { | |
6324 | r = relocs[i][0]; | |
6325 | if (r > reloc) | |
6326 | return reloc; | |
6327 | if (r == reloc) | |
6328 | return relocs[i][1]; | |
6329 | } | |
6330 | return reloc; | |
6331 | } | |
6332 | ||
b886a2ab RS |
6333 | /* Try to resolve relocation RELOC against constant OPERAND at assembly time. |
6334 | Return true on success, storing the resolved value in RESULT. */ | |
6335 | ||
6336 | static bfd_boolean | |
6337 | calculate_reloc (bfd_reloc_code_real_type reloc, offsetT operand, | |
6338 | offsetT *result) | |
6339 | { | |
6340 | switch (reloc) | |
6341 | { | |
6342 | case BFD_RELOC_MIPS_HIGHEST: | |
6343 | case BFD_RELOC_MICROMIPS_HIGHEST: | |
6344 | *result = ((operand + 0x800080008000ull) >> 48) & 0xffff; | |
6345 | return TRUE; | |
6346 | ||
6347 | case BFD_RELOC_MIPS_HIGHER: | |
6348 | case BFD_RELOC_MICROMIPS_HIGHER: | |
6349 | *result = ((operand + 0x80008000ull) >> 32) & 0xffff; | |
6350 | return TRUE; | |
6351 | ||
6352 | case BFD_RELOC_HI16_S: | |
6353 | case BFD_RELOC_MICROMIPS_HI16_S: | |
6354 | case BFD_RELOC_MIPS16_HI16_S: | |
6355 | *result = ((operand + 0x8000) >> 16) & 0xffff; | |
6356 | return TRUE; | |
6357 | ||
6358 | case BFD_RELOC_HI16: | |
6359 | case BFD_RELOC_MICROMIPS_HI16: | |
6360 | case BFD_RELOC_MIPS16_HI16: | |
6361 | *result = (operand >> 16) & 0xffff; | |
6362 | return TRUE; | |
6363 | ||
6364 | case BFD_RELOC_LO16: | |
6365 | case BFD_RELOC_MICROMIPS_LO16: | |
6366 | case BFD_RELOC_MIPS16_LO16: | |
6367 | *result = operand & 0xffff; | |
6368 | return TRUE; | |
6369 | ||
6370 | case BFD_RELOC_UNUSED: | |
6371 | *result = operand; | |
6372 | return TRUE; | |
6373 | ||
6374 | default: | |
6375 | return FALSE; | |
6376 | } | |
6377 | } | |
6378 | ||
71400594 RS |
6379 | /* Output an instruction. IP is the instruction information. |
6380 | ADDRESS_EXPR is an operand of the instruction to be used with | |
df58fc94 RS |
6381 | RELOC_TYPE. EXPANSIONP is true if the instruction is part of |
6382 | a macro expansion. */ | |
71400594 RS |
6383 | |
6384 | static void | |
6385 | append_insn (struct mips_cl_insn *ip, expressionS *address_expr, | |
df58fc94 | 6386 | bfd_reloc_code_real_type *reloc_type, bfd_boolean expansionp) |
71400594 | 6387 | { |
14fe068b | 6388 | unsigned long prev_pinfo2, pinfo; |
71400594 | 6389 | bfd_boolean relaxed_branch = FALSE; |
a4e06468 | 6390 | enum append_method method; |
2309ddf2 | 6391 | bfd_boolean relax32; |
2b0c8b40 | 6392 | int branch_disp; |
71400594 | 6393 | |
2309ddf2 | 6394 | if (mips_fix_loongson2f && !HAVE_CODE_COMPRESSION) |
c67a084a NC |
6395 | fix_loongson2f (ip); |
6396 | ||
738f4d98 | 6397 | file_ase_mips16 |= mips_opts.mips16; |
df58fc94 | 6398 | file_ase_micromips |= mips_opts.micromips; |
738f4d98 | 6399 | |
df58fc94 | 6400 | prev_pinfo2 = history[0].insn_mo->pinfo2; |
71400594 | 6401 | pinfo = ip->insn_mo->pinfo; |
df58fc94 RS |
6402 | |
6403 | if (mips_opts.micromips | |
6404 | && !expansionp | |
6405 | && (((prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 | |
6406 | && micromips_insn_length (ip->insn_mo) != 2) | |
6407 | || ((prev_pinfo2 & INSN2_BRANCH_DELAY_32BIT) != 0 | |
6408 | && micromips_insn_length (ip->insn_mo) != 4))) | |
1661c76c | 6409 | as_warn (_("wrong size instruction in a %u-bit branch delay slot"), |
df58fc94 | 6410 | (prev_pinfo2 & INSN2_BRANCH_DELAY_16BIT) != 0 ? 16 : 32); |
71400594 | 6411 | |
15be625d CM |
6412 | if (address_expr == NULL) |
6413 | ip->complete_p = 1; | |
b886a2ab RS |
6414 | else if (reloc_type[0] <= BFD_RELOC_UNUSED |
6415 | && reloc_type[1] == BFD_RELOC_UNUSED | |
6416 | && reloc_type[2] == BFD_RELOC_UNUSED | |
15be625d CM |
6417 | && address_expr->X_op == O_constant) |
6418 | { | |
15be625d CM |
6419 | switch (*reloc_type) |
6420 | { | |
15be625d | 6421 | case BFD_RELOC_MIPS_JMP: |
df58fc94 RS |
6422 | { |
6423 | int shift; | |
6424 | ||
6425 | shift = mips_opts.micromips ? 1 : 2; | |
6426 | if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0) | |
6427 | as_bad (_("jump to misaligned address (0x%lx)"), | |
6428 | (unsigned long) address_expr->X_add_number); | |
6429 | ip->insn_opcode |= ((address_expr->X_add_number >> shift) | |
6430 | & 0x3ffffff); | |
335574df | 6431 | ip->complete_p = 1; |
df58fc94 | 6432 | } |
15be625d CM |
6433 | break; |
6434 | ||
6435 | case BFD_RELOC_MIPS16_JMP: | |
6436 | if ((address_expr->X_add_number & 3) != 0) | |
6437 | as_bad (_("jump to misaligned address (0x%lx)"), | |
6438 | (unsigned long) address_expr->X_add_number); | |
6439 | ip->insn_opcode |= | |
6440 | (((address_expr->X_add_number & 0x7c0000) << 3) | |
6441 | | ((address_expr->X_add_number & 0xf800000) >> 7) | |
6442 | | ((address_expr->X_add_number & 0x3fffc) >> 2)); | |
335574df | 6443 | ip->complete_p = 1; |
15be625d CM |
6444 | break; |
6445 | ||
6446 | case BFD_RELOC_16_PCREL_S2: | |
df58fc94 RS |
6447 | { |
6448 | int shift; | |
6449 | ||
6450 | shift = mips_opts.micromips ? 1 : 2; | |
6451 | if ((address_expr->X_add_number & ((1 << shift) - 1)) != 0) | |
6452 | as_bad (_("branch to misaligned address (0x%lx)"), | |
6453 | (unsigned long) address_expr->X_add_number); | |
6454 | if (!mips_relax_branch) | |
6455 | { | |
6456 | if ((address_expr->X_add_number + (1 << (shift + 15))) | |
6457 | & ~((1 << (shift + 16)) - 1)) | |
6458 | as_bad (_("branch address range overflow (0x%lx)"), | |
6459 | (unsigned long) address_expr->X_add_number); | |
6460 | ip->insn_opcode |= ((address_expr->X_add_number >> shift) | |
6461 | & 0xffff); | |
6462 | } | |
df58fc94 | 6463 | } |
15be625d CM |
6464 | break; |
6465 | ||
6466 | default: | |
b886a2ab RS |
6467 | { |
6468 | offsetT value; | |
6469 | ||
6470 | if (calculate_reloc (*reloc_type, address_expr->X_add_number, | |
6471 | &value)) | |
6472 | { | |
6473 | ip->insn_opcode |= value & 0xffff; | |
6474 | ip->complete_p = 1; | |
6475 | } | |
6476 | } | |
6477 | break; | |
6478 | } | |
15be625d CM |
6479 | } |
6480 | ||
71400594 RS |
6481 | if (mips_relax.sequence != 2 && !mips_opts.noreorder) |
6482 | { | |
6483 | /* There are a lot of optimizations we could do that we don't. | |
6484 | In particular, we do not, in general, reorder instructions. | |
6485 | If you use gcc with optimization, it will reorder | |
6486 | instructions and generally do much more optimization then we | |
6487 | do here; repeating all that work in the assembler would only | |
6488 | benefit hand written assembly code, and does not seem worth | |
6489 | it. */ | |
6490 | int nops = (mips_optimize == 0 | |
932d1a1b RS |
6491 | ? nops_for_insn (0, history, NULL) |
6492 | : nops_for_insn_or_target (0, history, ip)); | |
71400594 | 6493 | if (nops > 0) |
252b5132 RH |
6494 | { |
6495 | fragS *old_frag; | |
6496 | unsigned long old_frag_offset; | |
6497 | int i; | |
252b5132 RH |
6498 | |
6499 | old_frag = frag_now; | |
6500 | old_frag_offset = frag_now_fix (); | |
6501 | ||
6502 | for (i = 0; i < nops; i++) | |
14fe068b RS |
6503 | add_fixed_insn (NOP_INSN); |
6504 | insert_into_history (0, nops, NOP_INSN); | |
252b5132 RH |
6505 | |
6506 | if (listing) | |
6507 | { | |
6508 | listing_prev_line (); | |
6509 | /* We may be at the start of a variant frag. In case we | |
6510 | are, make sure there is enough space for the frag | |
6511 | after the frags created by listing_prev_line. The | |
6512 | argument to frag_grow here must be at least as large | |
6513 | as the argument to all other calls to frag_grow in | |
6514 | this file. We don't have to worry about being in the | |
6515 | middle of a variant frag, because the variants insert | |
6516 | all needed nop instructions themselves. */ | |
6517 | frag_grow (40); | |
6518 | } | |
6519 | ||
462427c4 | 6520 | mips_move_text_labels (); |
252b5132 RH |
6521 | |
6522 | #ifndef NO_ECOFF_DEBUGGING | |
6523 | if (ECOFF_DEBUGGING) | |
6524 | ecoff_fix_loc (old_frag, old_frag_offset); | |
6525 | #endif | |
6526 | } | |
71400594 RS |
6527 | } |
6528 | else if (mips_relax.sequence != 2 && prev_nop_frag != NULL) | |
6529 | { | |
932d1a1b RS |
6530 | int nops; |
6531 | ||
6532 | /* Work out how many nops in prev_nop_frag are needed by IP, | |
6533 | ignoring hazards generated by the first prev_nop_frag_since | |
6534 | instructions. */ | |
6535 | nops = nops_for_insn_or_target (prev_nop_frag_since, history, ip); | |
9c2799c2 | 6536 | gas_assert (nops <= prev_nop_frag_holds); |
252b5132 | 6537 | |
71400594 RS |
6538 | /* Enforce NOPS as a minimum. */ |
6539 | if (nops > prev_nop_frag_required) | |
6540 | prev_nop_frag_required = nops; | |
252b5132 | 6541 | |
71400594 RS |
6542 | if (prev_nop_frag_holds == prev_nop_frag_required) |
6543 | { | |
6544 | /* Settle for the current number of nops. Update the history | |
6545 | accordingly (for the benefit of any future .set reorder code). */ | |
6546 | prev_nop_frag = NULL; | |
6547 | insert_into_history (prev_nop_frag_since, | |
6548 | prev_nop_frag_holds, NOP_INSN); | |
6549 | } | |
6550 | else | |
6551 | { | |
6552 | /* Allow this instruction to replace one of the nops that was | |
6553 | tentatively added to prev_nop_frag. */ | |
df58fc94 | 6554 | prev_nop_frag->fr_fix -= NOP_INSN_SIZE; |
71400594 RS |
6555 | prev_nop_frag_holds--; |
6556 | prev_nop_frag_since++; | |
252b5132 RH |
6557 | } |
6558 | } | |
6559 | ||
e407c74b | 6560 | method = get_append_method (ip, address_expr, reloc_type); |
2b0c8b40 | 6561 | branch_disp = method == APPEND_SWAP ? insn_length (history) : 0; |
a4e06468 | 6562 | |
e410add4 RS |
6563 | dwarf2_emit_insn (0); |
6564 | /* We want MIPS16 and microMIPS debug info to use ISA-encoded addresses, | |
6565 | so "move" the instruction address accordingly. | |
6566 | ||
6567 | Also, it doesn't seem appropriate for the assembler to reorder .loc | |
6568 | entries. If this instruction is a branch that we are going to swap | |
6569 | with the previous instruction, the two instructions should be | |
6570 | treated as a unit, and the debug information for both instructions | |
6571 | should refer to the start of the branch sequence. Using the | |
6572 | current position is certainly wrong when swapping a 32-bit branch | |
6573 | and a 16-bit delay slot, since the current position would then be | |
6574 | in the middle of a branch. */ | |
6575 | dwarf2_move_insn ((HAVE_CODE_COMPRESSION ? 1 : 0) - branch_disp); | |
58e2ea4d | 6576 | |
df58fc94 RS |
6577 | relax32 = (mips_relax_branch |
6578 | /* Don't try branch relaxation within .set nomacro, or within | |
6579 | .set noat if we use $at for PIC computations. If it turns | |
6580 | out that the branch was out-of-range, we'll get an error. */ | |
6581 | && !mips_opts.warn_about_macros | |
6582 | && (mips_opts.at || mips_pic == NO_PIC) | |
3bf0dbfb MR |
6583 | /* Don't relax BPOSGE32/64 or BC1ANY2T/F and BC1ANY4T/F |
6584 | as they have no complementing branches. */ | |
6585 | && !(ip->insn_mo->ase & (ASE_MIPS3D | ASE_DSP64 | ASE_DSP))); | |
df58fc94 RS |
6586 | |
6587 | if (!HAVE_CODE_COMPRESSION | |
6588 | && address_expr | |
6589 | && relax32 | |
0b25d3e6 | 6590 | && *reloc_type == BFD_RELOC_16_PCREL_S2 |
11625dd8 | 6591 | && delayed_branch_p (ip)) |
4a6a3df4 | 6592 | { |
895921c9 | 6593 | relaxed_branch = TRUE; |
1e915849 RS |
6594 | add_relaxed_insn (ip, (relaxed_branch_length |
6595 | (NULL, NULL, | |
11625dd8 RS |
6596 | uncond_branch_p (ip) ? -1 |
6597 | : branch_likely_p (ip) ? 1 | |
1e915849 RS |
6598 | : 0)), 4, |
6599 | RELAX_BRANCH_ENCODE | |
66b3e8da | 6600 | (AT, |
11625dd8 RS |
6601 | uncond_branch_p (ip), |
6602 | branch_likely_p (ip), | |
1e915849 RS |
6603 | pinfo & INSN_WRITE_GPR_31, |
6604 | 0), | |
6605 | address_expr->X_add_symbol, | |
6606 | address_expr->X_add_number); | |
4a6a3df4 AO |
6607 | *reloc_type = BFD_RELOC_UNUSED; |
6608 | } | |
df58fc94 RS |
6609 | else if (mips_opts.micromips |
6610 | && address_expr | |
6611 | && ((relax32 && *reloc_type == BFD_RELOC_16_PCREL_S2) | |
6612 | || *reloc_type > BFD_RELOC_UNUSED) | |
40209cad MR |
6613 | && (delayed_branch_p (ip) || compact_branch_p (ip)) |
6614 | /* Don't try branch relaxation when users specify | |
6615 | 16-bit/32-bit instructions. */ | |
6616 | && !forced_insn_length) | |
df58fc94 RS |
6617 | { |
6618 | bfd_boolean relax16 = *reloc_type > BFD_RELOC_UNUSED; | |
6619 | int type = relax16 ? *reloc_type - BFD_RELOC_UNUSED : 0; | |
11625dd8 RS |
6620 | int uncond = uncond_branch_p (ip) ? -1 : 0; |
6621 | int compact = compact_branch_p (ip); | |
df58fc94 RS |
6622 | int al = pinfo & INSN_WRITE_GPR_31; |
6623 | int length32; | |
6624 | ||
6625 | gas_assert (address_expr != NULL); | |
6626 | gas_assert (!mips_relax.sequence); | |
6627 | ||
2b0c8b40 | 6628 | relaxed_branch = TRUE; |
df58fc94 RS |
6629 | length32 = relaxed_micromips_32bit_branch_length (NULL, NULL, uncond); |
6630 | add_relaxed_insn (ip, relax32 ? length32 : 4, relax16 ? 2 : 4, | |
40209cad MR |
6631 | RELAX_MICROMIPS_ENCODE (type, AT, uncond, compact, al, |
6632 | relax32, 0, 0), | |
df58fc94 RS |
6633 | address_expr->X_add_symbol, |
6634 | address_expr->X_add_number); | |
6635 | *reloc_type = BFD_RELOC_UNUSED; | |
6636 | } | |
6637 | else if (mips_opts.mips16 && *reloc_type > BFD_RELOC_UNUSED) | |
252b5132 RH |
6638 | { |
6639 | /* We need to set up a variant frag. */ | |
df58fc94 | 6640 | gas_assert (address_expr != NULL); |
1e915849 RS |
6641 | add_relaxed_insn (ip, 4, 0, |
6642 | RELAX_MIPS16_ENCODE | |
6643 | (*reloc_type - BFD_RELOC_UNUSED, | |
df58fc94 | 6644 | forced_insn_length == 2, forced_insn_length == 4, |
11625dd8 | 6645 | delayed_branch_p (&history[0]), |
1e915849 RS |
6646 | history[0].mips16_absolute_jump_p), |
6647 | make_expr_symbol (address_expr), 0); | |
252b5132 | 6648 | } |
5c04167a | 6649 | else if (mips_opts.mips16 && insn_length (ip) == 2) |
9497f5ac | 6650 | { |
11625dd8 | 6651 | if (!delayed_branch_p (ip)) |
b8ee1a6e DU |
6652 | /* Make sure there is enough room to swap this instruction with |
6653 | a following jump instruction. */ | |
6654 | frag_grow (6); | |
1e915849 | 6655 | add_fixed_insn (ip); |
252b5132 RH |
6656 | } |
6657 | else | |
6658 | { | |
6659 | if (mips_opts.mips16 | |
6660 | && mips_opts.noreorder | |
11625dd8 | 6661 | && delayed_branch_p (&history[0])) |
252b5132 RH |
6662 | as_warn (_("extended instruction in delay slot")); |
6663 | ||
4d7206a2 RS |
6664 | if (mips_relax.sequence) |
6665 | { | |
6666 | /* If we've reached the end of this frag, turn it into a variant | |
6667 | frag and record the information for the instructions we've | |
6668 | written so far. */ | |
6669 | if (frag_room () < 4) | |
6670 | relax_close_frag (); | |
df58fc94 | 6671 | mips_relax.sizes[mips_relax.sequence - 1] += insn_length (ip); |
4d7206a2 RS |
6672 | } |
6673 | ||
584892a6 | 6674 | if (mips_relax.sequence != 2) |
df58fc94 RS |
6675 | { |
6676 | if (mips_macro_warning.first_insn_sizes[0] == 0) | |
6677 | mips_macro_warning.first_insn_sizes[0] = insn_length (ip); | |
6678 | mips_macro_warning.sizes[0] += insn_length (ip); | |
6679 | mips_macro_warning.insns[0]++; | |
6680 | } | |
584892a6 | 6681 | if (mips_relax.sequence != 1) |
df58fc94 RS |
6682 | { |
6683 | if (mips_macro_warning.first_insn_sizes[1] == 0) | |
6684 | mips_macro_warning.first_insn_sizes[1] = insn_length (ip); | |
6685 | mips_macro_warning.sizes[1] += insn_length (ip); | |
6686 | mips_macro_warning.insns[1]++; | |
6687 | } | |
584892a6 | 6688 | |
1e915849 RS |
6689 | if (mips_opts.mips16) |
6690 | { | |
6691 | ip->fixed_p = 1; | |
6692 | ip->mips16_absolute_jump_p = (*reloc_type == BFD_RELOC_MIPS16_JMP); | |
6693 | } | |
6694 | add_fixed_insn (ip); | |
252b5132 RH |
6695 | } |
6696 | ||
9fe77896 | 6697 | if (!ip->complete_p && *reloc_type < BFD_RELOC_UNUSED) |
252b5132 | 6698 | { |
df58fc94 | 6699 | bfd_reloc_code_real_type final_type[3]; |
2309ddf2 | 6700 | reloc_howto_type *howto0; |
9fe77896 RS |
6701 | reloc_howto_type *howto; |
6702 | int i; | |
34ce925e | 6703 | |
df58fc94 RS |
6704 | /* Perform any necessary conversion to microMIPS relocations |
6705 | and find out how many relocations there actually are. */ | |
6706 | for (i = 0; i < 3 && reloc_type[i] != BFD_RELOC_UNUSED; i++) | |
6707 | final_type[i] = micromips_map_reloc (reloc_type[i]); | |
6708 | ||
9fe77896 RS |
6709 | /* In a compound relocation, it is the final (outermost) |
6710 | operator that determines the relocated field. */ | |
2309ddf2 | 6711 | howto = howto0 = bfd_reloc_type_lookup (stdoutput, final_type[i - 1]); |
e8044f35 RS |
6712 | if (!howto) |
6713 | abort (); | |
2309ddf2 MR |
6714 | |
6715 | if (i > 1) | |
6716 | howto0 = bfd_reloc_type_lookup (stdoutput, final_type[0]); | |
9fe77896 RS |
6717 | ip->fixp[0] = fix_new_exp (ip->frag, ip->where, |
6718 | bfd_get_reloc_size (howto), | |
6719 | address_expr, | |
2309ddf2 MR |
6720 | howto0 && howto0->pc_relative, |
6721 | final_type[0]); | |
9fe77896 RS |
6722 | |
6723 | /* Tag symbols that have a R_MIPS16_26 relocation against them. */ | |
2309ddf2 | 6724 | if (final_type[0] == BFD_RELOC_MIPS16_JMP && ip->fixp[0]->fx_addsy) |
9fe77896 RS |
6725 | *symbol_get_tc (ip->fixp[0]->fx_addsy) = 1; |
6726 | ||
6727 | /* These relocations can have an addend that won't fit in | |
6728 | 4 octets for 64bit assembly. */ | |
6729 | if (HAVE_64BIT_GPRS | |
6730 | && ! howto->partial_inplace | |
6731 | && (reloc_type[0] == BFD_RELOC_16 | |
6732 | || reloc_type[0] == BFD_RELOC_32 | |
6733 | || reloc_type[0] == BFD_RELOC_MIPS_JMP | |
6734 | || reloc_type[0] == BFD_RELOC_GPREL16 | |
6735 | || reloc_type[0] == BFD_RELOC_MIPS_LITERAL | |
6736 | || reloc_type[0] == BFD_RELOC_GPREL32 | |
6737 | || reloc_type[0] == BFD_RELOC_64 | |
6738 | || reloc_type[0] == BFD_RELOC_CTOR | |
6739 | || reloc_type[0] == BFD_RELOC_MIPS_SUB | |
6740 | || reloc_type[0] == BFD_RELOC_MIPS_HIGHEST | |
6741 | || reloc_type[0] == BFD_RELOC_MIPS_HIGHER | |
6742 | || reloc_type[0] == BFD_RELOC_MIPS_SCN_DISP | |
6743 | || reloc_type[0] == BFD_RELOC_MIPS_REL16 | |
6744 | || reloc_type[0] == BFD_RELOC_MIPS_RELGOT | |
6745 | || reloc_type[0] == BFD_RELOC_MIPS16_GPREL | |
6746 | || hi16_reloc_p (reloc_type[0]) | |
6747 | || lo16_reloc_p (reloc_type[0]))) | |
6748 | ip->fixp[0]->fx_no_overflow = 1; | |
6749 | ||
ddaf2c41 MR |
6750 | /* These relocations can have an addend that won't fit in 2 octets. */ |
6751 | if (reloc_type[0] == BFD_RELOC_MICROMIPS_7_PCREL_S1 | |
6752 | || reloc_type[0] == BFD_RELOC_MICROMIPS_10_PCREL_S1) | |
6753 | ip->fixp[0]->fx_no_overflow = 1; | |
6754 | ||
9fe77896 RS |
6755 | if (mips_relax.sequence) |
6756 | { | |
6757 | if (mips_relax.first_fixup == 0) | |
6758 | mips_relax.first_fixup = ip->fixp[0]; | |
6759 | } | |
6760 | else if (reloc_needs_lo_p (*reloc_type)) | |
6761 | { | |
6762 | struct mips_hi_fixup *hi_fixup; | |
6763 | ||
6764 | /* Reuse the last entry if it already has a matching %lo. */ | |
6765 | hi_fixup = mips_hi_fixup_list; | |
6766 | if (hi_fixup == 0 | |
6767 | || !fixup_has_matching_lo_p (hi_fixup->fixp)) | |
4d7206a2 | 6768 | { |
9fe77896 RS |
6769 | hi_fixup = ((struct mips_hi_fixup *) |
6770 | xmalloc (sizeof (struct mips_hi_fixup))); | |
6771 | hi_fixup->next = mips_hi_fixup_list; | |
6772 | mips_hi_fixup_list = hi_fixup; | |
4d7206a2 | 6773 | } |
9fe77896 RS |
6774 | hi_fixup->fixp = ip->fixp[0]; |
6775 | hi_fixup->seg = now_seg; | |
6776 | } | |
252b5132 | 6777 | |
9fe77896 RS |
6778 | /* Add fixups for the second and third relocations, if given. |
6779 | Note that the ABI allows the second relocation to be | |
6780 | against RSS_UNDEF, RSS_GP, RSS_GP0 or RSS_LOC. At the | |
6781 | moment we only use RSS_UNDEF, but we could add support | |
6782 | for the others if it ever becomes necessary. */ | |
6783 | for (i = 1; i < 3; i++) | |
6784 | if (reloc_type[i] != BFD_RELOC_UNUSED) | |
6785 | { | |
6786 | ip->fixp[i] = fix_new (ip->frag, ip->where, | |
6787 | ip->fixp[0]->fx_size, NULL, 0, | |
df58fc94 | 6788 | FALSE, final_type[i]); |
f6688943 | 6789 | |
9fe77896 RS |
6790 | /* Use fx_tcbit to mark compound relocs. */ |
6791 | ip->fixp[0]->fx_tcbit = 1; | |
6792 | ip->fixp[i]->fx_tcbit = 1; | |
6793 | } | |
252b5132 | 6794 | } |
1e915849 | 6795 | install_insn (ip); |
252b5132 RH |
6796 | |
6797 | /* Update the register mask information. */ | |
4c260379 RS |
6798 | mips_gprmask |= gpr_read_mask (ip) | gpr_write_mask (ip); |
6799 | mips_cprmask[1] |= fpr_read_mask (ip) | fpr_write_mask (ip); | |
252b5132 | 6800 | |
a4e06468 | 6801 | switch (method) |
252b5132 | 6802 | { |
a4e06468 RS |
6803 | case APPEND_ADD: |
6804 | insert_into_history (0, 1, ip); | |
6805 | break; | |
6806 | ||
6807 | case APPEND_ADD_WITH_NOP: | |
14fe068b RS |
6808 | { |
6809 | struct mips_cl_insn *nop; | |
6810 | ||
6811 | insert_into_history (0, 1, ip); | |
6812 | nop = get_delay_slot_nop (ip); | |
6813 | add_fixed_insn (nop); | |
6814 | insert_into_history (0, 1, nop); | |
6815 | if (mips_relax.sequence) | |
6816 | mips_relax.sizes[mips_relax.sequence - 1] += insn_length (nop); | |
6817 | } | |
a4e06468 RS |
6818 | break; |
6819 | ||
6820 | case APPEND_ADD_COMPACT: | |
6821 | /* Convert MIPS16 jr/jalr into a "compact" jump. */ | |
6822 | gas_assert (mips_opts.mips16); | |
6823 | ip->insn_opcode |= 0x0080; | |
6824 | find_altered_mips16_opcode (ip); | |
6825 | install_insn (ip); | |
6826 | insert_into_history (0, 1, ip); | |
6827 | break; | |
6828 | ||
6829 | case APPEND_SWAP: | |
6830 | { | |
6831 | struct mips_cl_insn delay = history[0]; | |
6832 | if (mips_opts.mips16) | |
6833 | { | |
6834 | know (delay.frag == ip->frag); | |
6835 | move_insn (ip, delay.frag, delay.where); | |
6836 | move_insn (&delay, ip->frag, ip->where + insn_length (ip)); | |
6837 | } | |
464ab0e5 | 6838 | else if (relaxed_branch || delay.frag != ip->frag) |
a4e06468 RS |
6839 | { |
6840 | /* Add the delay slot instruction to the end of the | |
6841 | current frag and shrink the fixed part of the | |
6842 | original frag. If the branch occupies the tail of | |
6843 | the latter, move it backwards to cover the gap. */ | |
2b0c8b40 | 6844 | delay.frag->fr_fix -= branch_disp; |
a4e06468 | 6845 | if (delay.frag == ip->frag) |
2b0c8b40 | 6846 | move_insn (ip, ip->frag, ip->where - branch_disp); |
a4e06468 RS |
6847 | add_fixed_insn (&delay); |
6848 | } | |
6849 | else | |
6850 | { | |
2b0c8b40 MR |
6851 | move_insn (&delay, ip->frag, |
6852 | ip->where - branch_disp + insn_length (ip)); | |
a4e06468 RS |
6853 | move_insn (ip, history[0].frag, history[0].where); |
6854 | } | |
6855 | history[0] = *ip; | |
6856 | delay.fixed_p = 1; | |
6857 | insert_into_history (0, 1, &delay); | |
6858 | } | |
6859 | break; | |
252b5132 RH |
6860 | } |
6861 | ||
13408f1e | 6862 | /* If we have just completed an unconditional branch, clear the history. */ |
11625dd8 RS |
6863 | if ((delayed_branch_p (&history[1]) && uncond_branch_p (&history[1])) |
6864 | || (compact_branch_p (&history[0]) && uncond_branch_p (&history[0]))) | |
e407c74b NC |
6865 | { |
6866 | unsigned int i; | |
6867 | ||
79850f26 | 6868 | mips_no_prev_insn (); |
13408f1e | 6869 | |
e407c74b | 6870 | for (i = 0; i < ARRAY_SIZE (history); i++) |
79850f26 | 6871 | history[i].cleared_p = 1; |
e407c74b NC |
6872 | } |
6873 | ||
df58fc94 RS |
6874 | /* We need to emit a label at the end of branch-likely macros. */ |
6875 | if (emit_branch_likely_macro) | |
6876 | { | |
6877 | emit_branch_likely_macro = FALSE; | |
6878 | micromips_add_label (); | |
6879 | } | |
6880 | ||
252b5132 RH |
6881 | /* We just output an insn, so the next one doesn't have a label. */ |
6882 | mips_clear_insn_labels (); | |
252b5132 RH |
6883 | } |
6884 | ||
e407c74b NC |
6885 | /* Forget that there was any previous instruction or label. |
6886 | When BRANCH is true, the branch history is also flushed. */ | |
252b5132 RH |
6887 | |
6888 | static void | |
7d10b47d | 6889 | mips_no_prev_insn (void) |
252b5132 | 6890 | { |
7d10b47d RS |
6891 | prev_nop_frag = NULL; |
6892 | insert_into_history (0, ARRAY_SIZE (history), NOP_INSN); | |
252b5132 RH |
6893 | mips_clear_insn_labels (); |
6894 | } | |
6895 | ||
7d10b47d RS |
6896 | /* This function must be called before we emit something other than |
6897 | instructions. It is like mips_no_prev_insn except that it inserts | |
6898 | any NOPS that might be needed by previous instructions. */ | |
252b5132 | 6899 | |
7d10b47d RS |
6900 | void |
6901 | mips_emit_delays (void) | |
252b5132 RH |
6902 | { |
6903 | if (! mips_opts.noreorder) | |
6904 | { | |
932d1a1b | 6905 | int nops = nops_for_insn (0, history, NULL); |
252b5132 RH |
6906 | if (nops > 0) |
6907 | { | |
7d10b47d RS |
6908 | while (nops-- > 0) |
6909 | add_fixed_insn (NOP_INSN); | |
462427c4 | 6910 | mips_move_text_labels (); |
7d10b47d RS |
6911 | } |
6912 | } | |
6913 | mips_no_prev_insn (); | |
6914 | } | |
6915 | ||
6916 | /* Start a (possibly nested) noreorder block. */ | |
6917 | ||
6918 | static void | |
6919 | start_noreorder (void) | |
6920 | { | |
6921 | if (mips_opts.noreorder == 0) | |
6922 | { | |
6923 | unsigned int i; | |
6924 | int nops; | |
6925 | ||
6926 | /* None of the instructions before the .set noreorder can be moved. */ | |
6927 | for (i = 0; i < ARRAY_SIZE (history); i++) | |
6928 | history[i].fixed_p = 1; | |
6929 | ||
6930 | /* Insert any nops that might be needed between the .set noreorder | |
6931 | block and the previous instructions. We will later remove any | |
6932 | nops that turn out not to be needed. */ | |
932d1a1b | 6933 | nops = nops_for_insn (0, history, NULL); |
7d10b47d RS |
6934 | if (nops > 0) |
6935 | { | |
6936 | if (mips_optimize != 0) | |
252b5132 RH |
6937 | { |
6938 | /* Record the frag which holds the nop instructions, so | |
6939 | that we can remove them if we don't need them. */ | |
df58fc94 | 6940 | frag_grow (nops * NOP_INSN_SIZE); |
252b5132 RH |
6941 | prev_nop_frag = frag_now; |
6942 | prev_nop_frag_holds = nops; | |
6943 | prev_nop_frag_required = 0; | |
6944 | prev_nop_frag_since = 0; | |
6945 | } | |
6946 | ||
6947 | for (; nops > 0; --nops) | |
1e915849 | 6948 | add_fixed_insn (NOP_INSN); |
252b5132 | 6949 | |
7d10b47d RS |
6950 | /* Move on to a new frag, so that it is safe to simply |
6951 | decrease the size of prev_nop_frag. */ | |
6952 | frag_wane (frag_now); | |
6953 | frag_new (0); | |
462427c4 | 6954 | mips_move_text_labels (); |
252b5132 | 6955 | } |
df58fc94 | 6956 | mips_mark_labels (); |
7d10b47d | 6957 | mips_clear_insn_labels (); |
252b5132 | 6958 | } |
7d10b47d RS |
6959 | mips_opts.noreorder++; |
6960 | mips_any_noreorder = 1; | |
6961 | } | |
252b5132 | 6962 | |
7d10b47d | 6963 | /* End a nested noreorder block. */ |
252b5132 | 6964 | |
7d10b47d RS |
6965 | static void |
6966 | end_noreorder (void) | |
6967 | { | |
6968 | mips_opts.noreorder--; | |
6969 | if (mips_opts.noreorder == 0 && prev_nop_frag != NULL) | |
6970 | { | |
6971 | /* Commit to inserting prev_nop_frag_required nops and go back to | |
6972 | handling nop insertion the .set reorder way. */ | |
6973 | prev_nop_frag->fr_fix -= ((prev_nop_frag_holds - prev_nop_frag_required) | |
df58fc94 | 6974 | * NOP_INSN_SIZE); |
7d10b47d RS |
6975 | insert_into_history (prev_nop_frag_since, |
6976 | prev_nop_frag_required, NOP_INSN); | |
6977 | prev_nop_frag = NULL; | |
6978 | } | |
252b5132 RH |
6979 | } |
6980 | ||
97d87491 RS |
6981 | /* Sign-extend 32-bit mode constants that have bit 31 set and all |
6982 | higher bits unset. */ | |
6983 | ||
6984 | static void | |
6985 | normalize_constant_expr (expressionS *ex) | |
6986 | { | |
6987 | if (ex->X_op == O_constant | |
6988 | && IS_ZEXT_32BIT_NUM (ex->X_add_number)) | |
6989 | ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000) | |
6990 | - 0x80000000); | |
6991 | } | |
6992 | ||
6993 | /* Sign-extend 32-bit mode address offsets that have bit 31 set and | |
6994 | all higher bits unset. */ | |
6995 | ||
6996 | static void | |
6997 | normalize_address_expr (expressionS *ex) | |
6998 | { | |
6999 | if (((ex->X_op == O_constant && HAVE_32BIT_ADDRESSES) | |
7000 | || (ex->X_op == O_symbol && HAVE_32BIT_SYMBOLS)) | |
7001 | && IS_ZEXT_32BIT_NUM (ex->X_add_number)) | |
7002 | ex->X_add_number = (((ex->X_add_number & 0xffffffff) ^ 0x80000000) | |
7003 | - 0x80000000); | |
7004 | } | |
7005 | ||
7006 | /* Try to match TOKENS against OPCODE, storing the result in INSN. | |
7007 | Return true if the match was successful. | |
7008 | ||
7009 | OPCODE_EXTRA is a value that should be ORed into the opcode | |
7010 | (used for VU0 channel suffixes, etc.). MORE_ALTS is true if | |
7011 | there are more alternatives after OPCODE and SOFT_MATCH is | |
7012 | as for mips_arg_info. */ | |
7013 | ||
7014 | static bfd_boolean | |
7015 | match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode, | |
7016 | struct mips_operand_token *tokens, unsigned int opcode_extra, | |
60f20e8b | 7017 | bfd_boolean lax_match, bfd_boolean complete_p) |
97d87491 RS |
7018 | { |
7019 | const char *args; | |
7020 | struct mips_arg_info arg; | |
7021 | const struct mips_operand *operand; | |
7022 | char c; | |
7023 | ||
7024 | imm_expr.X_op = O_absent; | |
97d87491 RS |
7025 | offset_expr.X_op = O_absent; |
7026 | offset_reloc[0] = BFD_RELOC_UNUSED; | |
7027 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
7028 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
7029 | ||
7030 | create_insn (insn, opcode); | |
60f20e8b RS |
7031 | /* When no opcode suffix is specified, assume ".xyzw". */ |
7032 | if ((opcode->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0 && opcode_extra == 0) | |
7033 | insn->insn_opcode |= 0xf << mips_vu0_channel_mask.lsb; | |
7034 | else | |
7035 | insn->insn_opcode |= opcode_extra; | |
97d87491 RS |
7036 | memset (&arg, 0, sizeof (arg)); |
7037 | arg.insn = insn; | |
7038 | arg.token = tokens; | |
7039 | arg.argnum = 1; | |
7040 | arg.last_regno = ILLEGAL_REG; | |
7041 | arg.dest_regno = ILLEGAL_REG; | |
60f20e8b | 7042 | arg.lax_match = lax_match; |
97d87491 RS |
7043 | for (args = opcode->args;; ++args) |
7044 | { | |
7045 | if (arg.token->type == OT_END) | |
7046 | { | |
7047 | /* Handle unary instructions in which only one operand is given. | |
7048 | The source is then the same as the destination. */ | |
7049 | if (arg.opnum == 1 && *args == ',') | |
7050 | { | |
7051 | operand = (mips_opts.micromips | |
7052 | ? decode_micromips_operand (args + 1) | |
7053 | : decode_mips_operand (args + 1)); | |
7054 | if (operand && mips_optional_operand_p (operand)) | |
7055 | { | |
7056 | arg.token = tokens; | |
7057 | arg.argnum = 1; | |
7058 | continue; | |
7059 | } | |
7060 | } | |
7061 | ||
7062 | /* Treat elided base registers as $0. */ | |
7063 | if (strcmp (args, "(b)") == 0) | |
7064 | args += 3; | |
7065 | ||
7066 | if (args[0] == '+') | |
7067 | switch (args[1]) | |
7068 | { | |
7069 | case 'K': | |
7070 | case 'N': | |
7071 | /* The register suffix is optional. */ | |
7072 | args += 2; | |
7073 | break; | |
7074 | } | |
7075 | ||
7076 | /* Fail the match if there were too few operands. */ | |
7077 | if (*args) | |
7078 | return FALSE; | |
7079 | ||
7080 | /* Successful match. */ | |
60f20e8b RS |
7081 | if (!complete_p) |
7082 | return TRUE; | |
e3de51ce | 7083 | clear_insn_error (); |
97d87491 RS |
7084 | if (arg.dest_regno == arg.last_regno |
7085 | && strncmp (insn->insn_mo->name, "jalr", 4) == 0) | |
7086 | { | |
7087 | if (arg.opnum == 2) | |
e3de51ce | 7088 | set_insn_error |
1661c76c | 7089 | (0, _("source and destination must be different")); |
97d87491 | 7090 | else if (arg.last_regno == 31) |
e3de51ce | 7091 | set_insn_error |
1661c76c | 7092 | (0, _("a destination register must be supplied")); |
97d87491 RS |
7093 | } |
7094 | check_completed_insn (&arg); | |
7095 | return TRUE; | |
7096 | } | |
7097 | ||
7098 | /* Fail the match if the line has too many operands. */ | |
7099 | if (*args == 0) | |
7100 | return FALSE; | |
7101 | ||
7102 | /* Handle characters that need to match exactly. */ | |
7103 | if (*args == '(' || *args == ')' || *args == ',') | |
7104 | { | |
7105 | if (match_char (&arg, *args)) | |
7106 | continue; | |
7107 | return FALSE; | |
7108 | } | |
7109 | if (*args == '#') | |
7110 | { | |
7111 | ++args; | |
7112 | if (arg.token->type == OT_DOUBLE_CHAR | |
7113 | && arg.token->u.ch == *args) | |
7114 | { | |
7115 | ++arg.token; | |
7116 | continue; | |
7117 | } | |
7118 | return FALSE; | |
7119 | } | |
7120 | ||
7121 | /* Handle special macro operands. Work out the properties of | |
7122 | other operands. */ | |
7123 | arg.opnum += 1; | |
97d87491 RS |
7124 | switch (*args) |
7125 | { | |
7126 | case '+': | |
7127 | switch (args[1]) | |
7128 | { | |
97d87491 RS |
7129 | case 'i': |
7130 | *offset_reloc = BFD_RELOC_MIPS_JMP; | |
7131 | break; | |
7132 | } | |
7133 | break; | |
7134 | ||
97d87491 | 7135 | case 'I': |
1a00e612 RS |
7136 | if (!match_const_int (&arg, &imm_expr.X_add_number)) |
7137 | return FALSE; | |
7138 | imm_expr.X_op = O_constant; | |
97d87491 RS |
7139 | if (HAVE_32BIT_GPRS) |
7140 | normalize_constant_expr (&imm_expr); | |
7141 | continue; | |
7142 | ||
7143 | case 'A': | |
7144 | if (arg.token->type == OT_CHAR && arg.token->u.ch == '(') | |
7145 | { | |
7146 | /* Assume that the offset has been elided and that what | |
7147 | we saw was a base register. The match will fail later | |
7148 | if that assumption turns out to be wrong. */ | |
7149 | offset_expr.X_op = O_constant; | |
7150 | offset_expr.X_add_number = 0; | |
7151 | } | |
97d87491 | 7152 | else |
1a00e612 RS |
7153 | { |
7154 | if (!match_expression (&arg, &offset_expr, offset_reloc)) | |
7155 | return FALSE; | |
7156 | normalize_address_expr (&offset_expr); | |
7157 | } | |
97d87491 RS |
7158 | continue; |
7159 | ||
7160 | case 'F': | |
7161 | if (!match_float_constant (&arg, &imm_expr, &offset_expr, | |
7162 | 8, TRUE)) | |
1a00e612 | 7163 | return FALSE; |
97d87491 RS |
7164 | continue; |
7165 | ||
7166 | case 'L': | |
7167 | if (!match_float_constant (&arg, &imm_expr, &offset_expr, | |
7168 | 8, FALSE)) | |
1a00e612 | 7169 | return FALSE; |
97d87491 RS |
7170 | continue; |
7171 | ||
7172 | case 'f': | |
7173 | if (!match_float_constant (&arg, &imm_expr, &offset_expr, | |
7174 | 4, TRUE)) | |
1a00e612 | 7175 | return FALSE; |
97d87491 RS |
7176 | continue; |
7177 | ||
7178 | case 'l': | |
7179 | if (!match_float_constant (&arg, &imm_expr, &offset_expr, | |
7180 | 4, FALSE)) | |
1a00e612 | 7181 | return FALSE; |
97d87491 RS |
7182 | continue; |
7183 | ||
97d87491 RS |
7184 | case 'p': |
7185 | *offset_reloc = BFD_RELOC_16_PCREL_S2; | |
7186 | break; | |
7187 | ||
7188 | case 'a': | |
7189 | *offset_reloc = BFD_RELOC_MIPS_JMP; | |
7190 | break; | |
7191 | ||
7192 | case 'm': | |
7193 | gas_assert (mips_opts.micromips); | |
7194 | c = args[1]; | |
7195 | switch (c) | |
7196 | { | |
7197 | case 'D': | |
7198 | case 'E': | |
7199 | if (!forced_insn_length) | |
7200 | *offset_reloc = (int) BFD_RELOC_UNUSED + c; | |
7201 | else if (c == 'D') | |
7202 | *offset_reloc = BFD_RELOC_MICROMIPS_10_PCREL_S1; | |
7203 | else | |
7204 | *offset_reloc = BFD_RELOC_MICROMIPS_7_PCREL_S1; | |
7205 | break; | |
7206 | } | |
7207 | break; | |
7208 | } | |
7209 | ||
7210 | operand = (mips_opts.micromips | |
7211 | ? decode_micromips_operand (args) | |
7212 | : decode_mips_operand (args)); | |
7213 | if (!operand) | |
7214 | abort (); | |
7215 | ||
7216 | /* Skip prefixes. */ | |
7217 | if (*args == '+' || *args == 'm') | |
7218 | args++; | |
7219 | ||
7220 | if (mips_optional_operand_p (operand) | |
7221 | && args[1] == ',' | |
7222 | && (arg.token[0].type != OT_REG | |
7223 | || arg.token[1].type == OT_END)) | |
7224 | { | |
7225 | /* Assume that the register has been elided and is the | |
7226 | same as the first operand. */ | |
7227 | arg.token = tokens; | |
7228 | arg.argnum = 1; | |
7229 | } | |
7230 | ||
7231 | if (!match_operand (&arg, operand)) | |
7232 | return FALSE; | |
7233 | } | |
7234 | } | |
7235 | ||
7236 | /* Like match_insn, but for MIPS16. */ | |
7237 | ||
7238 | static bfd_boolean | |
7239 | match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode, | |
1a00e612 | 7240 | struct mips_operand_token *tokens) |
97d87491 RS |
7241 | { |
7242 | const char *args; | |
7243 | const struct mips_operand *operand; | |
7244 | const struct mips_operand *ext_operand; | |
7245 | struct mips_arg_info arg; | |
7246 | int relax_char; | |
7247 | ||
7248 | create_insn (insn, opcode); | |
7249 | imm_expr.X_op = O_absent; | |
97d87491 RS |
7250 | offset_expr.X_op = O_absent; |
7251 | offset_reloc[0] = BFD_RELOC_UNUSED; | |
7252 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
7253 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
7254 | relax_char = 0; | |
7255 | ||
7256 | memset (&arg, 0, sizeof (arg)); | |
7257 | arg.insn = insn; | |
7258 | arg.token = tokens; | |
7259 | arg.argnum = 1; | |
7260 | arg.last_regno = ILLEGAL_REG; | |
7261 | arg.dest_regno = ILLEGAL_REG; | |
97d87491 RS |
7262 | relax_char = 0; |
7263 | for (args = opcode->args;; ++args) | |
7264 | { | |
7265 | int c; | |
7266 | ||
7267 | if (arg.token->type == OT_END) | |
7268 | { | |
7269 | offsetT value; | |
7270 | ||
7271 | /* Handle unary instructions in which only one operand is given. | |
7272 | The source is then the same as the destination. */ | |
7273 | if (arg.opnum == 1 && *args == ',') | |
7274 | { | |
7275 | operand = decode_mips16_operand (args[1], FALSE); | |
7276 | if (operand && mips_optional_operand_p (operand)) | |
7277 | { | |
7278 | arg.token = tokens; | |
7279 | arg.argnum = 1; | |
7280 | continue; | |
7281 | } | |
7282 | } | |
7283 | ||
7284 | /* Fail the match if there were too few operands. */ | |
7285 | if (*args) | |
7286 | return FALSE; | |
7287 | ||
7288 | /* Successful match. Stuff the immediate value in now, if | |
7289 | we can. */ | |
e3de51ce | 7290 | clear_insn_error (); |
97d87491 RS |
7291 | if (opcode->pinfo == INSN_MACRO) |
7292 | { | |
7293 | gas_assert (relax_char == 0 || relax_char == 'p'); | |
7294 | gas_assert (*offset_reloc == BFD_RELOC_UNUSED); | |
7295 | } | |
7296 | else if (relax_char | |
7297 | && offset_expr.X_op == O_constant | |
7298 | && calculate_reloc (*offset_reloc, | |
7299 | offset_expr.X_add_number, | |
7300 | &value)) | |
7301 | { | |
7302 | mips16_immed (NULL, 0, relax_char, *offset_reloc, value, | |
7303 | forced_insn_length, &insn->insn_opcode); | |
7304 | offset_expr.X_op = O_absent; | |
7305 | *offset_reloc = BFD_RELOC_UNUSED; | |
7306 | } | |
7307 | else if (relax_char && *offset_reloc != BFD_RELOC_UNUSED) | |
7308 | { | |
7309 | if (forced_insn_length == 2) | |
e3de51ce | 7310 | set_insn_error (0, _("invalid unextended operand value")); |
97d87491 RS |
7311 | forced_insn_length = 4; |
7312 | insn->insn_opcode |= MIPS16_EXTEND; | |
7313 | } | |
7314 | else if (relax_char) | |
7315 | *offset_reloc = (int) BFD_RELOC_UNUSED + relax_char; | |
7316 | ||
7317 | check_completed_insn (&arg); | |
7318 | return TRUE; | |
7319 | } | |
7320 | ||
7321 | /* Fail the match if the line has too many operands. */ | |
7322 | if (*args == 0) | |
7323 | return FALSE; | |
7324 | ||
7325 | /* Handle characters that need to match exactly. */ | |
7326 | if (*args == '(' || *args == ')' || *args == ',') | |
7327 | { | |
7328 | if (match_char (&arg, *args)) | |
7329 | continue; | |
7330 | return FALSE; | |
7331 | } | |
7332 | ||
7333 | arg.opnum += 1; | |
7334 | c = *args; | |
7335 | switch (c) | |
7336 | { | |
7337 | case 'p': | |
7338 | case 'q': | |
7339 | case 'A': | |
7340 | case 'B': | |
7341 | case 'E': | |
7342 | relax_char = c; | |
7343 | break; | |
7344 | ||
7345 | case 'I': | |
1a00e612 RS |
7346 | if (!match_const_int (&arg, &imm_expr.X_add_number)) |
7347 | return FALSE; | |
7348 | imm_expr.X_op = O_constant; | |
97d87491 RS |
7349 | if (HAVE_32BIT_GPRS) |
7350 | normalize_constant_expr (&imm_expr); | |
7351 | continue; | |
7352 | ||
7353 | case 'a': | |
7354 | case 'i': | |
7355 | *offset_reloc = BFD_RELOC_MIPS16_JMP; | |
7356 | insn->insn_opcode <<= 16; | |
7357 | break; | |
7358 | } | |
7359 | ||
7360 | operand = decode_mips16_operand (c, FALSE); | |
7361 | if (!operand) | |
7362 | abort (); | |
7363 | ||
7364 | /* '6' is a special case. It is used for BREAK and SDBBP, | |
7365 | whose operands are only meaningful to the software that decodes | |
7366 | them. This means that there is no architectural reason why | |
7367 | they cannot be prefixed by EXTEND, but in practice, | |
7368 | exception handlers will only look at the instruction | |
7369 | itself. We therefore allow '6' to be extended when | |
7370 | disassembling but not when assembling. */ | |
7371 | if (operand->type != OP_PCREL && c != '6') | |
7372 | { | |
7373 | ext_operand = decode_mips16_operand (c, TRUE); | |
7374 | if (operand != ext_operand) | |
7375 | { | |
7376 | if (arg.token->type == OT_CHAR && arg.token->u.ch == '(') | |
7377 | { | |
7378 | offset_expr.X_op = O_constant; | |
7379 | offset_expr.X_add_number = 0; | |
7380 | relax_char = c; | |
7381 | continue; | |
7382 | } | |
7383 | ||
7384 | /* We need the OT_INTEGER check because some MIPS16 | |
7385 | immediate variants are listed before the register ones. */ | |
7386 | if (arg.token->type != OT_INTEGER | |
7387 | || !match_expression (&arg, &offset_expr, offset_reloc)) | |
7388 | return FALSE; | |
7389 | ||
7390 | /* '8' is used for SLTI(U) and has traditionally not | |
7391 | been allowed to take relocation operators. */ | |
7392 | if (offset_reloc[0] != BFD_RELOC_UNUSED | |
7393 | && (ext_operand->size != 16 || c == '8')) | |
7394 | return FALSE; | |
7395 | ||
7396 | relax_char = c; | |
7397 | continue; | |
7398 | } | |
7399 | } | |
7400 | ||
7401 | if (mips_optional_operand_p (operand) | |
7402 | && args[1] == ',' | |
7403 | && (arg.token[0].type != OT_REG | |
7404 | || arg.token[1].type == OT_END)) | |
7405 | { | |
7406 | /* Assume that the register has been elided and is the | |
7407 | same as the first operand. */ | |
7408 | arg.token = tokens; | |
7409 | arg.argnum = 1; | |
7410 | } | |
7411 | ||
7412 | if (!match_operand (&arg, operand)) | |
7413 | return FALSE; | |
7414 | } | |
7415 | } | |
7416 | ||
60f20e8b RS |
7417 | /* Record that the current instruction is invalid for the current ISA. */ |
7418 | ||
7419 | static void | |
7420 | match_invalid_for_isa (void) | |
7421 | { | |
7422 | set_insn_error_ss | |
1661c76c | 7423 | (0, _("opcode not supported on this processor: %s (%s)"), |
60f20e8b RS |
7424 | mips_cpu_info_from_arch (mips_opts.arch)->name, |
7425 | mips_cpu_info_from_isa (mips_opts.isa)->name); | |
7426 | } | |
7427 | ||
7428 | /* Try to match TOKENS against a series of opcode entries, starting at FIRST. | |
7429 | Return true if a definite match or failure was found, storing any match | |
7430 | in INSN. OPCODE_EXTRA is a value that should be ORed into the opcode | |
7431 | (to handle things like VU0 suffixes). LAX_MATCH is true if we have already | |
7432 | tried and failed to match under normal conditions and now want to try a | |
7433 | more relaxed match. */ | |
7434 | ||
7435 | static bfd_boolean | |
7436 | match_insns (struct mips_cl_insn *insn, const struct mips_opcode *first, | |
7437 | const struct mips_opcode *past, struct mips_operand_token *tokens, | |
7438 | int opcode_extra, bfd_boolean lax_match) | |
7439 | { | |
7440 | const struct mips_opcode *opcode; | |
7441 | const struct mips_opcode *invalid_delay_slot; | |
7442 | bfd_boolean seen_valid_for_isa, seen_valid_for_size; | |
7443 | ||
7444 | /* Search for a match, ignoring alternatives that don't satisfy the | |
7445 | current ISA or forced_length. */ | |
7446 | invalid_delay_slot = 0; | |
7447 | seen_valid_for_isa = FALSE; | |
7448 | seen_valid_for_size = FALSE; | |
7449 | opcode = first; | |
7450 | do | |
7451 | { | |
7452 | gas_assert (strcmp (opcode->name, first->name) == 0); | |
7453 | if (is_opcode_valid (opcode)) | |
7454 | { | |
7455 | seen_valid_for_isa = TRUE; | |
7456 | if (is_size_valid (opcode)) | |
7457 | { | |
7458 | bfd_boolean delay_slot_ok; | |
7459 | ||
7460 | seen_valid_for_size = TRUE; | |
7461 | delay_slot_ok = is_delay_slot_valid (opcode); | |
7462 | if (match_insn (insn, opcode, tokens, opcode_extra, | |
7463 | lax_match, delay_slot_ok)) | |
7464 | { | |
7465 | if (!delay_slot_ok) | |
7466 | { | |
7467 | if (!invalid_delay_slot) | |
7468 | invalid_delay_slot = opcode; | |
7469 | } | |
7470 | else | |
7471 | return TRUE; | |
7472 | } | |
7473 | } | |
7474 | } | |
7475 | ++opcode; | |
7476 | } | |
7477 | while (opcode < past && strcmp (opcode->name, first->name) == 0); | |
7478 | ||
7479 | /* If the only matches we found had the wrong length for the delay slot, | |
7480 | pick the first such match. We'll issue an appropriate warning later. */ | |
7481 | if (invalid_delay_slot) | |
7482 | { | |
7483 | if (match_insn (insn, invalid_delay_slot, tokens, opcode_extra, | |
7484 | lax_match, TRUE)) | |
7485 | return TRUE; | |
7486 | abort (); | |
7487 | } | |
7488 | ||
7489 | /* Handle the case where we didn't try to match an instruction because | |
7490 | all the alternatives were incompatible with the current ISA. */ | |
7491 | if (!seen_valid_for_isa) | |
7492 | { | |
7493 | match_invalid_for_isa (); | |
7494 | return TRUE; | |
7495 | } | |
7496 | ||
7497 | /* Handle the case where we didn't try to match an instruction because | |
7498 | all the alternatives were of the wrong size. */ | |
7499 | if (!seen_valid_for_size) | |
7500 | { | |
7501 | if (mips_opts.insn32) | |
1661c76c | 7502 | set_insn_error (0, _("opcode not supported in the `insn32' mode")); |
60f20e8b RS |
7503 | else |
7504 | set_insn_error_i | |
1661c76c | 7505 | (0, _("unrecognized %d-bit version of microMIPS opcode"), |
60f20e8b RS |
7506 | 8 * forced_insn_length); |
7507 | return TRUE; | |
7508 | } | |
7509 | ||
7510 | return FALSE; | |
7511 | } | |
7512 | ||
7513 | /* Like match_insns, but for MIPS16. */ | |
7514 | ||
7515 | static bfd_boolean | |
7516 | match_mips16_insns (struct mips_cl_insn *insn, const struct mips_opcode *first, | |
7517 | struct mips_operand_token *tokens) | |
7518 | { | |
7519 | const struct mips_opcode *opcode; | |
7520 | bfd_boolean seen_valid_for_isa; | |
7521 | ||
7522 | /* Search for a match, ignoring alternatives that don't satisfy the | |
7523 | current ISA. There are no separate entries for extended forms so | |
7524 | we deal with forced_length later. */ | |
7525 | seen_valid_for_isa = FALSE; | |
7526 | opcode = first; | |
7527 | do | |
7528 | { | |
7529 | gas_assert (strcmp (opcode->name, first->name) == 0); | |
7530 | if (is_opcode_valid_16 (opcode)) | |
7531 | { | |
7532 | seen_valid_for_isa = TRUE; | |
7533 | if (match_mips16_insn (insn, opcode, tokens)) | |
7534 | return TRUE; | |
7535 | } | |
7536 | ++opcode; | |
7537 | } | |
7538 | while (opcode < &mips16_opcodes[bfd_mips16_num_opcodes] | |
7539 | && strcmp (opcode->name, first->name) == 0); | |
7540 | ||
7541 | /* Handle the case where we didn't try to match an instruction because | |
7542 | all the alternatives were incompatible with the current ISA. */ | |
7543 | if (!seen_valid_for_isa) | |
7544 | { | |
7545 | match_invalid_for_isa (); | |
7546 | return TRUE; | |
7547 | } | |
7548 | ||
7549 | return FALSE; | |
7550 | } | |
7551 | ||
584892a6 RS |
7552 | /* Set up global variables for the start of a new macro. */ |
7553 | ||
7554 | static void | |
7555 | macro_start (void) | |
7556 | { | |
7557 | memset (&mips_macro_warning.sizes, 0, sizeof (mips_macro_warning.sizes)); | |
df58fc94 RS |
7558 | memset (&mips_macro_warning.first_insn_sizes, 0, |
7559 | sizeof (mips_macro_warning.first_insn_sizes)); | |
7560 | memset (&mips_macro_warning.insns, 0, sizeof (mips_macro_warning.insns)); | |
584892a6 | 7561 | mips_macro_warning.delay_slot_p = (mips_opts.noreorder |
11625dd8 | 7562 | && delayed_branch_p (&history[0])); |
df58fc94 RS |
7563 | switch (history[0].insn_mo->pinfo2 |
7564 | & (INSN2_BRANCH_DELAY_32BIT | INSN2_BRANCH_DELAY_16BIT)) | |
7565 | { | |
7566 | case INSN2_BRANCH_DELAY_32BIT: | |
7567 | mips_macro_warning.delay_slot_length = 4; | |
7568 | break; | |
7569 | case INSN2_BRANCH_DELAY_16BIT: | |
7570 | mips_macro_warning.delay_slot_length = 2; | |
7571 | break; | |
7572 | default: | |
7573 | mips_macro_warning.delay_slot_length = 0; | |
7574 | break; | |
7575 | } | |
7576 | mips_macro_warning.first_frag = NULL; | |
584892a6 RS |
7577 | } |
7578 | ||
df58fc94 RS |
7579 | /* Given that a macro is longer than one instruction or of the wrong size, |
7580 | return the appropriate warning for it. Return null if no warning is | |
7581 | needed. SUBTYPE is a bitmask of RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT, | |
7582 | RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND, | |
7583 | and RELAX_NOMACRO. */ | |
584892a6 RS |
7584 | |
7585 | static const char * | |
7586 | macro_warning (relax_substateT subtype) | |
7587 | { | |
7588 | if (subtype & RELAX_DELAY_SLOT) | |
1661c76c | 7589 | return _("macro instruction expanded into multiple instructions" |
584892a6 RS |
7590 | " in a branch delay slot"); |
7591 | else if (subtype & RELAX_NOMACRO) | |
1661c76c | 7592 | return _("macro instruction expanded into multiple instructions"); |
df58fc94 RS |
7593 | else if (subtype & (RELAX_DELAY_SLOT_SIZE_FIRST |
7594 | | RELAX_DELAY_SLOT_SIZE_SECOND)) | |
7595 | return ((subtype & RELAX_DELAY_SLOT_16BIT) | |
1661c76c | 7596 | ? _("macro instruction expanded into a wrong size instruction" |
df58fc94 | 7597 | " in a 16-bit branch delay slot") |
1661c76c | 7598 | : _("macro instruction expanded into a wrong size instruction" |
df58fc94 | 7599 | " in a 32-bit branch delay slot")); |
584892a6 RS |
7600 | else |
7601 | return 0; | |
7602 | } | |
7603 | ||
7604 | /* Finish up a macro. Emit warnings as appropriate. */ | |
7605 | ||
7606 | static void | |
7607 | macro_end (void) | |
7608 | { | |
df58fc94 RS |
7609 | /* Relaxation warning flags. */ |
7610 | relax_substateT subtype = 0; | |
7611 | ||
7612 | /* Check delay slot size requirements. */ | |
7613 | if (mips_macro_warning.delay_slot_length == 2) | |
7614 | subtype |= RELAX_DELAY_SLOT_16BIT; | |
7615 | if (mips_macro_warning.delay_slot_length != 0) | |
584892a6 | 7616 | { |
df58fc94 RS |
7617 | if (mips_macro_warning.delay_slot_length |
7618 | != mips_macro_warning.first_insn_sizes[0]) | |
7619 | subtype |= RELAX_DELAY_SLOT_SIZE_FIRST; | |
7620 | if (mips_macro_warning.delay_slot_length | |
7621 | != mips_macro_warning.first_insn_sizes[1]) | |
7622 | subtype |= RELAX_DELAY_SLOT_SIZE_SECOND; | |
7623 | } | |
584892a6 | 7624 | |
df58fc94 RS |
7625 | /* Check instruction count requirements. */ |
7626 | if (mips_macro_warning.insns[0] > 1 || mips_macro_warning.insns[1] > 1) | |
7627 | { | |
7628 | if (mips_macro_warning.insns[1] > mips_macro_warning.insns[0]) | |
584892a6 RS |
7629 | subtype |= RELAX_SECOND_LONGER; |
7630 | if (mips_opts.warn_about_macros) | |
7631 | subtype |= RELAX_NOMACRO; | |
7632 | if (mips_macro_warning.delay_slot_p) | |
7633 | subtype |= RELAX_DELAY_SLOT; | |
df58fc94 | 7634 | } |
584892a6 | 7635 | |
df58fc94 RS |
7636 | /* If both alternatives fail to fill a delay slot correctly, |
7637 | emit the warning now. */ | |
7638 | if ((subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0 | |
7639 | && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0) | |
7640 | { | |
7641 | relax_substateT s; | |
7642 | const char *msg; | |
7643 | ||
7644 | s = subtype & (RELAX_DELAY_SLOT_16BIT | |
7645 | | RELAX_DELAY_SLOT_SIZE_FIRST | |
7646 | | RELAX_DELAY_SLOT_SIZE_SECOND); | |
7647 | msg = macro_warning (s); | |
7648 | if (msg != NULL) | |
7649 | as_warn ("%s", msg); | |
7650 | subtype &= ~s; | |
7651 | } | |
7652 | ||
7653 | /* If both implementations are longer than 1 instruction, then emit the | |
7654 | warning now. */ | |
7655 | if (mips_macro_warning.insns[0] > 1 && mips_macro_warning.insns[1] > 1) | |
7656 | { | |
7657 | relax_substateT s; | |
7658 | const char *msg; | |
7659 | ||
7660 | s = subtype & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT); | |
7661 | msg = macro_warning (s); | |
7662 | if (msg != NULL) | |
7663 | as_warn ("%s", msg); | |
7664 | subtype &= ~s; | |
584892a6 | 7665 | } |
df58fc94 RS |
7666 | |
7667 | /* If any flags still set, then one implementation might need a warning | |
7668 | and the other either will need one of a different kind or none at all. | |
7669 | Pass any remaining flags over to relaxation. */ | |
7670 | if (mips_macro_warning.first_frag != NULL) | |
7671 | mips_macro_warning.first_frag->fr_subtype |= subtype; | |
584892a6 RS |
7672 | } |
7673 | ||
df58fc94 RS |
7674 | /* Instruction operand formats used in macros that vary between |
7675 | standard MIPS and microMIPS code. */ | |
7676 | ||
833794fc | 7677 | static const char * const brk_fmt[2][2] = { { "c", "c" }, { "mF", "c" } }; |
df58fc94 RS |
7678 | static const char * const cop12_fmt[2] = { "E,o(b)", "E,~(b)" }; |
7679 | static const char * const jalr_fmt[2] = { "d,s", "t,s" }; | |
7680 | static const char * const lui_fmt[2] = { "t,u", "s,u" }; | |
7681 | static const char * const mem12_fmt[2] = { "t,o(b)", "t,~(b)" }; | |
833794fc | 7682 | static const char * const mfhl_fmt[2][2] = { { "d", "d" }, { "mj", "s" } }; |
df58fc94 RS |
7683 | static const char * const shft_fmt[2] = { "d,w,<", "t,r,<" }; |
7684 | static const char * const trap_fmt[2] = { "s,t,q", "s,t,|" }; | |
7685 | ||
833794fc | 7686 | #define BRK_FMT (brk_fmt[mips_opts.micromips][mips_opts.insn32]) |
df58fc94 RS |
7687 | #define COP12_FMT (cop12_fmt[mips_opts.micromips]) |
7688 | #define JALR_FMT (jalr_fmt[mips_opts.micromips]) | |
7689 | #define LUI_FMT (lui_fmt[mips_opts.micromips]) | |
7690 | #define MEM12_FMT (mem12_fmt[mips_opts.micromips]) | |
833794fc | 7691 | #define MFHL_FMT (mfhl_fmt[mips_opts.micromips][mips_opts.insn32]) |
df58fc94 RS |
7692 | #define SHFT_FMT (shft_fmt[mips_opts.micromips]) |
7693 | #define TRAP_FMT (trap_fmt[mips_opts.micromips]) | |
7694 | ||
6e1304d8 RS |
7695 | /* Read a macro's relocation codes from *ARGS and store them in *R. |
7696 | The first argument in *ARGS will be either the code for a single | |
7697 | relocation or -1 followed by the three codes that make up a | |
7698 | composite relocation. */ | |
7699 | ||
7700 | static void | |
7701 | macro_read_relocs (va_list *args, bfd_reloc_code_real_type *r) | |
7702 | { | |
7703 | int i, next; | |
7704 | ||
7705 | next = va_arg (*args, int); | |
7706 | if (next >= 0) | |
7707 | r[0] = (bfd_reloc_code_real_type) next; | |
7708 | else | |
f2ae14a1 RS |
7709 | { |
7710 | for (i = 0; i < 3; i++) | |
7711 | r[i] = (bfd_reloc_code_real_type) va_arg (*args, int); | |
7712 | /* This function is only used for 16-bit relocation fields. | |
7713 | To make the macro code simpler, treat an unrelocated value | |
7714 | in the same way as BFD_RELOC_LO16. */ | |
7715 | if (r[0] == BFD_RELOC_UNUSED) | |
7716 | r[0] = BFD_RELOC_LO16; | |
7717 | } | |
6e1304d8 RS |
7718 | } |
7719 | ||
252b5132 RH |
7720 | /* Build an instruction created by a macro expansion. This is passed |
7721 | a pointer to the count of instructions created so far, an | |
7722 | expression, the name of the instruction to build, an operand format | |
7723 | string, and corresponding arguments. */ | |
7724 | ||
252b5132 | 7725 | static void |
67c0d1eb | 7726 | macro_build (expressionS *ep, const char *name, const char *fmt, ...) |
252b5132 | 7727 | { |
df58fc94 | 7728 | const struct mips_opcode *mo = NULL; |
f6688943 | 7729 | bfd_reloc_code_real_type r[3]; |
df58fc94 | 7730 | const struct mips_opcode *amo; |
e077a1c8 | 7731 | const struct mips_operand *operand; |
df58fc94 RS |
7732 | struct hash_control *hash; |
7733 | struct mips_cl_insn insn; | |
252b5132 | 7734 | va_list args; |
e077a1c8 | 7735 | unsigned int uval; |
252b5132 | 7736 | |
252b5132 | 7737 | va_start (args, fmt); |
252b5132 | 7738 | |
252b5132 RH |
7739 | if (mips_opts.mips16) |
7740 | { | |
03ea81db | 7741 | mips16_macro_build (ep, name, fmt, &args); |
252b5132 RH |
7742 | va_end (args); |
7743 | return; | |
7744 | } | |
7745 | ||
f6688943 TS |
7746 | r[0] = BFD_RELOC_UNUSED; |
7747 | r[1] = BFD_RELOC_UNUSED; | |
7748 | r[2] = BFD_RELOC_UNUSED; | |
df58fc94 RS |
7749 | hash = mips_opts.micromips ? micromips_op_hash : op_hash; |
7750 | amo = (struct mips_opcode *) hash_find (hash, name); | |
7751 | gas_assert (amo); | |
7752 | gas_assert (strcmp (name, amo->name) == 0); | |
1e915849 | 7753 | |
df58fc94 | 7754 | do |
8b082fb1 TS |
7755 | { |
7756 | /* Search until we get a match for NAME. It is assumed here that | |
df58fc94 RS |
7757 | macros will never generate MDMX, MIPS-3D, or MT instructions. |
7758 | We try to match an instruction that fulfils the branch delay | |
7759 | slot instruction length requirement (if any) of the previous | |
7760 | instruction. While doing this we record the first instruction | |
7761 | seen that matches all the other conditions and use it anyway | |
7762 | if the requirement cannot be met; we will issue an appropriate | |
7763 | warning later on. */ | |
7764 | if (strcmp (fmt, amo->args) == 0 | |
7765 | && amo->pinfo != INSN_MACRO | |
7766 | && is_opcode_valid (amo) | |
7767 | && is_size_valid (amo)) | |
7768 | { | |
7769 | if (is_delay_slot_valid (amo)) | |
7770 | { | |
7771 | mo = amo; | |
7772 | break; | |
7773 | } | |
7774 | else if (!mo) | |
7775 | mo = amo; | |
7776 | } | |
8b082fb1 | 7777 | |
df58fc94 RS |
7778 | ++amo; |
7779 | gas_assert (amo->name); | |
252b5132 | 7780 | } |
df58fc94 | 7781 | while (strcmp (name, amo->name) == 0); |
252b5132 | 7782 | |
df58fc94 | 7783 | gas_assert (mo); |
1e915849 | 7784 | create_insn (&insn, mo); |
e077a1c8 | 7785 | for (; *fmt; ++fmt) |
252b5132 | 7786 | { |
e077a1c8 | 7787 | switch (*fmt) |
252b5132 | 7788 | { |
252b5132 RH |
7789 | case ',': |
7790 | case '(': | |
7791 | case ')': | |
252b5132 | 7792 | case 'z': |
e077a1c8 | 7793 | break; |
252b5132 RH |
7794 | |
7795 | case 'i': | |
7796 | case 'j': | |
6e1304d8 | 7797 | macro_read_relocs (&args, r); |
9c2799c2 | 7798 | gas_assert (*r == BFD_RELOC_GPREL16 |
e391c024 RS |
7799 | || *r == BFD_RELOC_MIPS_HIGHER |
7800 | || *r == BFD_RELOC_HI16_S | |
7801 | || *r == BFD_RELOC_LO16 | |
7802 | || *r == BFD_RELOC_MIPS_GOT_OFST); | |
e077a1c8 | 7803 | break; |
e391c024 RS |
7804 | |
7805 | case 'o': | |
7806 | macro_read_relocs (&args, r); | |
e077a1c8 | 7807 | break; |
252b5132 RH |
7808 | |
7809 | case 'u': | |
6e1304d8 | 7810 | macro_read_relocs (&args, r); |
9c2799c2 | 7811 | gas_assert (ep != NULL |
90ecf173 MR |
7812 | && (ep->X_op == O_constant |
7813 | || (ep->X_op == O_symbol | |
7814 | && (*r == BFD_RELOC_MIPS_HIGHEST | |
7815 | || *r == BFD_RELOC_HI16_S | |
7816 | || *r == BFD_RELOC_HI16 | |
7817 | || *r == BFD_RELOC_GPREL16 | |
7818 | || *r == BFD_RELOC_MIPS_GOT_HI16 | |
7819 | || *r == BFD_RELOC_MIPS_CALL_HI16)))); | |
e077a1c8 | 7820 | break; |
252b5132 RH |
7821 | |
7822 | case 'p': | |
9c2799c2 | 7823 | gas_assert (ep != NULL); |
bad36eac | 7824 | |
252b5132 RH |
7825 | /* |
7826 | * This allows macro() to pass an immediate expression for | |
7827 | * creating short branches without creating a symbol. | |
bad36eac DJ |
7828 | * |
7829 | * We don't allow branch relaxation for these branches, as | |
7830 | * they should only appear in ".set nomacro" anyway. | |
252b5132 RH |
7831 | */ |
7832 | if (ep->X_op == O_constant) | |
7833 | { | |
df58fc94 RS |
7834 | /* For microMIPS we always use relocations for branches. |
7835 | So we should not resolve immediate values. */ | |
7836 | gas_assert (!mips_opts.micromips); | |
7837 | ||
bad36eac DJ |
7838 | if ((ep->X_add_number & 3) != 0) |
7839 | as_bad (_("branch to misaligned address (0x%lx)"), | |
7840 | (unsigned long) ep->X_add_number); | |
7841 | if ((ep->X_add_number + 0x20000) & ~0x3ffff) | |
7842 | as_bad (_("branch address range overflow (0x%lx)"), | |
7843 | (unsigned long) ep->X_add_number); | |
252b5132 RH |
7844 | insn.insn_opcode |= (ep->X_add_number >> 2) & 0xffff; |
7845 | ep = NULL; | |
7846 | } | |
7847 | else | |
0b25d3e6 | 7848 | *r = BFD_RELOC_16_PCREL_S2; |
e077a1c8 | 7849 | break; |
252b5132 RH |
7850 | |
7851 | case 'a': | |
9c2799c2 | 7852 | gas_assert (ep != NULL); |
f6688943 | 7853 | *r = BFD_RELOC_MIPS_JMP; |
e077a1c8 | 7854 | break; |
d43b4baf | 7855 | |
252b5132 | 7856 | default: |
e077a1c8 RS |
7857 | operand = (mips_opts.micromips |
7858 | ? decode_micromips_operand (fmt) | |
7859 | : decode_mips_operand (fmt)); | |
7860 | if (!operand) | |
7861 | abort (); | |
7862 | ||
7863 | uval = va_arg (args, int); | |
7864 | if (operand->type == OP_CLO_CLZ_DEST) | |
7865 | uval |= (uval << 5); | |
7866 | insn_insert_operand (&insn, operand, uval); | |
7867 | ||
7868 | if (*fmt == '+' || *fmt == 'm') | |
7869 | ++fmt; | |
7870 | break; | |
252b5132 | 7871 | } |
252b5132 RH |
7872 | } |
7873 | va_end (args); | |
9c2799c2 | 7874 | gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL); |
252b5132 | 7875 | |
df58fc94 | 7876 | append_insn (&insn, ep, r, TRUE); |
252b5132 RH |
7877 | } |
7878 | ||
7879 | static void | |
67c0d1eb | 7880 | mips16_macro_build (expressionS *ep, const char *name, const char *fmt, |
03ea81db | 7881 | va_list *args) |
252b5132 | 7882 | { |
1e915849 | 7883 | struct mips_opcode *mo; |
252b5132 | 7884 | struct mips_cl_insn insn; |
e077a1c8 | 7885 | const struct mips_operand *operand; |
f6688943 TS |
7886 | bfd_reloc_code_real_type r[3] |
7887 | = {BFD_RELOC_UNUSED, BFD_RELOC_UNUSED, BFD_RELOC_UNUSED}; | |
252b5132 | 7888 | |
1e915849 | 7889 | mo = (struct mips_opcode *) hash_find (mips16_op_hash, name); |
9c2799c2 NC |
7890 | gas_assert (mo); |
7891 | gas_assert (strcmp (name, mo->name) == 0); | |
252b5132 | 7892 | |
1e915849 | 7893 | while (strcmp (fmt, mo->args) != 0 || mo->pinfo == INSN_MACRO) |
252b5132 | 7894 | { |
1e915849 | 7895 | ++mo; |
9c2799c2 NC |
7896 | gas_assert (mo->name); |
7897 | gas_assert (strcmp (name, mo->name) == 0); | |
252b5132 RH |
7898 | } |
7899 | ||
1e915849 | 7900 | create_insn (&insn, mo); |
e077a1c8 | 7901 | for (; *fmt; ++fmt) |
252b5132 RH |
7902 | { |
7903 | int c; | |
7904 | ||
e077a1c8 | 7905 | c = *fmt; |
252b5132 RH |
7906 | switch (c) |
7907 | { | |
252b5132 RH |
7908 | case ',': |
7909 | case '(': | |
7910 | case ')': | |
e077a1c8 | 7911 | break; |
252b5132 RH |
7912 | |
7913 | case '0': | |
7914 | case 'S': | |
7915 | case 'P': | |
7916 | case 'R': | |
e077a1c8 | 7917 | break; |
252b5132 RH |
7918 | |
7919 | case '<': | |
7920 | case '>': | |
7921 | case '4': | |
7922 | case '5': | |
7923 | case 'H': | |
7924 | case 'W': | |
7925 | case 'D': | |
7926 | case 'j': | |
7927 | case '8': | |
7928 | case 'V': | |
7929 | case 'C': | |
7930 | case 'U': | |
7931 | case 'k': | |
7932 | case 'K': | |
7933 | case 'p': | |
7934 | case 'q': | |
7935 | { | |
b886a2ab RS |
7936 | offsetT value; |
7937 | ||
9c2799c2 | 7938 | gas_assert (ep != NULL); |
252b5132 RH |
7939 | |
7940 | if (ep->X_op != O_constant) | |
874e8986 | 7941 | *r = (int) BFD_RELOC_UNUSED + c; |
b886a2ab | 7942 | else if (calculate_reloc (*r, ep->X_add_number, &value)) |
252b5132 | 7943 | { |
b886a2ab | 7944 | mips16_immed (NULL, 0, c, *r, value, 0, &insn.insn_opcode); |
252b5132 | 7945 | ep = NULL; |
f6688943 | 7946 | *r = BFD_RELOC_UNUSED; |
252b5132 RH |
7947 | } |
7948 | } | |
e077a1c8 | 7949 | break; |
252b5132 | 7950 | |
e077a1c8 RS |
7951 | default: |
7952 | operand = decode_mips16_operand (c, FALSE); | |
7953 | if (!operand) | |
7954 | abort (); | |
252b5132 | 7955 | |
4a06e5a2 | 7956 | insn_insert_operand (&insn, operand, va_arg (*args, int)); |
e077a1c8 RS |
7957 | break; |
7958 | } | |
252b5132 RH |
7959 | } |
7960 | ||
9c2799c2 | 7961 | gas_assert (*r == BFD_RELOC_UNUSED ? ep == NULL : ep != NULL); |
252b5132 | 7962 | |
df58fc94 | 7963 | append_insn (&insn, ep, r, TRUE); |
252b5132 RH |
7964 | } |
7965 | ||
438c16b8 TS |
7966 | /* |
7967 | * Generate a "jalr" instruction with a relocation hint to the called | |
7968 | * function. This occurs in NewABI PIC code. | |
7969 | */ | |
7970 | static void | |
df58fc94 | 7971 | macro_build_jalr (expressionS *ep, int cprestore) |
438c16b8 | 7972 | { |
df58fc94 RS |
7973 | static const bfd_reloc_code_real_type jalr_relocs[2] |
7974 | = { BFD_RELOC_MIPS_JALR, BFD_RELOC_MICROMIPS_JALR }; | |
7975 | bfd_reloc_code_real_type jalr_reloc = jalr_relocs[mips_opts.micromips]; | |
7976 | const char *jalr; | |
685736be | 7977 | char *f = NULL; |
b34976b6 | 7978 | |
1180b5a4 | 7979 | if (MIPS_JALR_HINT_P (ep)) |
f21f8242 | 7980 | { |
cc3d92a5 | 7981 | frag_grow (8); |
f21f8242 AO |
7982 | f = frag_more (0); |
7983 | } | |
2906b037 | 7984 | if (mips_opts.micromips) |
df58fc94 | 7985 | { |
833794fc MR |
7986 | jalr = ((mips_opts.noreorder && !cprestore) || mips_opts.insn32 |
7987 | ? "jalr" : "jalrs"); | |
e64af278 | 7988 | if (MIPS_JALR_HINT_P (ep) |
833794fc | 7989 | || mips_opts.insn32 |
e64af278 | 7990 | || (history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT)) |
df58fc94 RS |
7991 | macro_build (NULL, jalr, "t,s", RA, PIC_CALL_REG); |
7992 | else | |
7993 | macro_build (NULL, jalr, "mj", PIC_CALL_REG); | |
7994 | } | |
2906b037 MR |
7995 | else |
7996 | macro_build (NULL, "jalr", "d,s", RA, PIC_CALL_REG); | |
1180b5a4 | 7997 | if (MIPS_JALR_HINT_P (ep)) |
df58fc94 | 7998 | fix_new_exp (frag_now, f - frag_now->fr_literal, 4, ep, FALSE, jalr_reloc); |
438c16b8 TS |
7999 | } |
8000 | ||
252b5132 RH |
8001 | /* |
8002 | * Generate a "lui" instruction. | |
8003 | */ | |
8004 | static void | |
67c0d1eb | 8005 | macro_build_lui (expressionS *ep, int regnum) |
252b5132 | 8006 | { |
9c2799c2 | 8007 | gas_assert (! mips_opts.mips16); |
252b5132 | 8008 | |
df58fc94 | 8009 | if (ep->X_op != O_constant) |
252b5132 | 8010 | { |
9c2799c2 | 8011 | gas_assert (ep->X_op == O_symbol); |
bbe506e8 TS |
8012 | /* _gp_disp is a special case, used from s_cpload. |
8013 | __gnu_local_gp is used if mips_no_shared. */ | |
9c2799c2 | 8014 | gas_assert (mips_pic == NO_PIC |
78e1bb40 | 8015 | || (! HAVE_NEWABI |
aa6975fb ILT |
8016 | && strcmp (S_GET_NAME (ep->X_add_symbol), "_gp_disp") == 0) |
8017 | || (! mips_in_shared | |
bbe506e8 TS |
8018 | && strcmp (S_GET_NAME (ep->X_add_symbol), |
8019 | "__gnu_local_gp") == 0)); | |
252b5132 RH |
8020 | } |
8021 | ||
df58fc94 | 8022 | macro_build (ep, "lui", LUI_FMT, regnum, BFD_RELOC_HI16_S); |
252b5132 RH |
8023 | } |
8024 | ||
885add95 CD |
8025 | /* Generate a sequence of instructions to do a load or store from a constant |
8026 | offset off of a base register (breg) into/from a target register (treg), | |
8027 | using AT if necessary. */ | |
8028 | static void | |
67c0d1eb RS |
8029 | macro_build_ldst_constoffset (expressionS *ep, const char *op, |
8030 | int treg, int breg, int dbl) | |
885add95 | 8031 | { |
9c2799c2 | 8032 | gas_assert (ep->X_op == O_constant); |
885add95 | 8033 | |
256ab948 | 8034 | /* Sign-extending 32-bit constants makes their handling easier. */ |
2051e8c4 MR |
8035 | if (!dbl) |
8036 | normalize_constant_expr (ep); | |
256ab948 | 8037 | |
67c1ffbe | 8038 | /* Right now, this routine can only handle signed 32-bit constants. */ |
ecd13cd3 | 8039 | if (! IS_SEXT_32BIT_NUM(ep->X_add_number + 0x8000)) |
885add95 CD |
8040 | as_warn (_("operand overflow")); |
8041 | ||
8042 | if (IS_SEXT_16BIT_NUM(ep->X_add_number)) | |
8043 | { | |
8044 | /* Signed 16-bit offset will fit in the op. Easy! */ | |
67c0d1eb | 8045 | macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, breg); |
885add95 CD |
8046 | } |
8047 | else | |
8048 | { | |
8049 | /* 32-bit offset, need multiple instructions and AT, like: | |
8050 | lui $tempreg,const_hi (BFD_RELOC_HI16_S) | |
8051 | addu $tempreg,$tempreg,$breg | |
8052 | <op> $treg,const_lo($tempreg) (BFD_RELOC_LO16) | |
8053 | to handle the complete offset. */ | |
67c0d1eb RS |
8054 | macro_build_lui (ep, AT); |
8055 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, AT, breg); | |
8056 | macro_build (ep, op, "t,o(b)", treg, BFD_RELOC_LO16, AT); | |
885add95 | 8057 | |
741fe287 | 8058 | if (!mips_opts.at) |
1661c76c | 8059 | as_bad (_("macro used $at after \".set noat\"")); |
885add95 CD |
8060 | } |
8061 | } | |
8062 | ||
252b5132 RH |
8063 | /* set_at() |
8064 | * Generates code to set the $at register to true (one) | |
8065 | * if reg is less than the immediate expression. | |
8066 | */ | |
8067 | static void | |
67c0d1eb | 8068 | set_at (int reg, int unsignedp) |
252b5132 | 8069 | { |
b0e6f033 | 8070 | if (imm_expr.X_add_number >= -0x8000 |
252b5132 | 8071 | && imm_expr.X_add_number < 0x8000) |
67c0d1eb RS |
8072 | macro_build (&imm_expr, unsignedp ? "sltiu" : "slti", "t,r,j", |
8073 | AT, reg, BFD_RELOC_LO16); | |
252b5132 RH |
8074 | else |
8075 | { | |
67c0d1eb RS |
8076 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
8077 | macro_build (NULL, unsignedp ? "sltu" : "slt", "d,v,t", AT, reg, AT); | |
252b5132 RH |
8078 | } |
8079 | } | |
8080 | ||
252b5132 RH |
8081 | /* Count the leading zeroes by performing a binary chop. This is a |
8082 | bulky bit of source, but performance is a LOT better for the | |
8083 | majority of values than a simple loop to count the bits: | |
8084 | for (lcnt = 0; (lcnt < 32); lcnt++) | |
8085 | if ((v) & (1 << (31 - lcnt))) | |
8086 | break; | |
8087 | However it is not code size friendly, and the gain will drop a bit | |
8088 | on certain cached systems. | |
8089 | */ | |
8090 | #define COUNT_TOP_ZEROES(v) \ | |
8091 | (((v) & ~0xffff) == 0 \ | |
8092 | ? ((v) & ~0xff) == 0 \ | |
8093 | ? ((v) & ~0xf) == 0 \ | |
8094 | ? ((v) & ~0x3) == 0 \ | |
8095 | ? ((v) & ~0x1) == 0 \ | |
8096 | ? !(v) \ | |
8097 | ? 32 \ | |
8098 | : 31 \ | |
8099 | : 30 \ | |
8100 | : ((v) & ~0x7) == 0 \ | |
8101 | ? 29 \ | |
8102 | : 28 \ | |
8103 | : ((v) & ~0x3f) == 0 \ | |
8104 | ? ((v) & ~0x1f) == 0 \ | |
8105 | ? 27 \ | |
8106 | : 26 \ | |
8107 | : ((v) & ~0x7f) == 0 \ | |
8108 | ? 25 \ | |
8109 | : 24 \ | |
8110 | : ((v) & ~0xfff) == 0 \ | |
8111 | ? ((v) & ~0x3ff) == 0 \ | |
8112 | ? ((v) & ~0x1ff) == 0 \ | |
8113 | ? 23 \ | |
8114 | : 22 \ | |
8115 | : ((v) & ~0x7ff) == 0 \ | |
8116 | ? 21 \ | |
8117 | : 20 \ | |
8118 | : ((v) & ~0x3fff) == 0 \ | |
8119 | ? ((v) & ~0x1fff) == 0 \ | |
8120 | ? 19 \ | |
8121 | : 18 \ | |
8122 | : ((v) & ~0x7fff) == 0 \ | |
8123 | ? 17 \ | |
8124 | : 16 \ | |
8125 | : ((v) & ~0xffffff) == 0 \ | |
8126 | ? ((v) & ~0xfffff) == 0 \ | |
8127 | ? ((v) & ~0x3ffff) == 0 \ | |
8128 | ? ((v) & ~0x1ffff) == 0 \ | |
8129 | ? 15 \ | |
8130 | : 14 \ | |
8131 | : ((v) & ~0x7ffff) == 0 \ | |
8132 | ? 13 \ | |
8133 | : 12 \ | |
8134 | : ((v) & ~0x3fffff) == 0 \ | |
8135 | ? ((v) & ~0x1fffff) == 0 \ | |
8136 | ? 11 \ | |
8137 | : 10 \ | |
8138 | : ((v) & ~0x7fffff) == 0 \ | |
8139 | ? 9 \ | |
8140 | : 8 \ | |
8141 | : ((v) & ~0xfffffff) == 0 \ | |
8142 | ? ((v) & ~0x3ffffff) == 0 \ | |
8143 | ? ((v) & ~0x1ffffff) == 0 \ | |
8144 | ? 7 \ | |
8145 | : 6 \ | |
8146 | : ((v) & ~0x7ffffff) == 0 \ | |
8147 | ? 5 \ | |
8148 | : 4 \ | |
8149 | : ((v) & ~0x3fffffff) == 0 \ | |
8150 | ? ((v) & ~0x1fffffff) == 0 \ | |
8151 | ? 3 \ | |
8152 | : 2 \ | |
8153 | : ((v) & ~0x7fffffff) == 0 \ | |
8154 | ? 1 \ | |
8155 | : 0) | |
8156 | ||
8157 | /* load_register() | |
67c1ffbe | 8158 | * This routine generates the least number of instructions necessary to load |
252b5132 RH |
8159 | * an absolute expression value into a register. |
8160 | */ | |
8161 | static void | |
67c0d1eb | 8162 | load_register (int reg, expressionS *ep, int dbl) |
252b5132 RH |
8163 | { |
8164 | int freg; | |
8165 | expressionS hi32, lo32; | |
8166 | ||
8167 | if (ep->X_op != O_big) | |
8168 | { | |
9c2799c2 | 8169 | gas_assert (ep->X_op == O_constant); |
256ab948 TS |
8170 | |
8171 | /* Sign-extending 32-bit constants makes their handling easier. */ | |
2051e8c4 MR |
8172 | if (!dbl) |
8173 | normalize_constant_expr (ep); | |
256ab948 TS |
8174 | |
8175 | if (IS_SEXT_16BIT_NUM (ep->X_add_number)) | |
252b5132 RH |
8176 | { |
8177 | /* We can handle 16 bit signed values with an addiu to | |
8178 | $zero. No need to ever use daddiu here, since $zero and | |
8179 | the result are always correct in 32 bit mode. */ | |
67c0d1eb | 8180 | macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16); |
252b5132 RH |
8181 | return; |
8182 | } | |
8183 | else if (ep->X_add_number >= 0 && ep->X_add_number < 0x10000) | |
8184 | { | |
8185 | /* We can handle 16 bit unsigned values with an ori to | |
8186 | $zero. */ | |
67c0d1eb | 8187 | macro_build (ep, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16); |
252b5132 RH |
8188 | return; |
8189 | } | |
256ab948 | 8190 | else if ((IS_SEXT_32BIT_NUM (ep->X_add_number))) |
252b5132 RH |
8191 | { |
8192 | /* 32 bit values require an lui. */ | |
df58fc94 | 8193 | macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_HI16); |
252b5132 | 8194 | if ((ep->X_add_number & 0xffff) != 0) |
67c0d1eb | 8195 | macro_build (ep, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16); |
252b5132 RH |
8196 | return; |
8197 | } | |
8198 | } | |
8199 | ||
8200 | /* The value is larger than 32 bits. */ | |
8201 | ||
2051e8c4 | 8202 | if (!dbl || HAVE_32BIT_GPRS) |
252b5132 | 8203 | { |
55e08f71 NC |
8204 | char value[32]; |
8205 | ||
8206 | sprintf_vma (value, ep->X_add_number); | |
1661c76c | 8207 | as_bad (_("number (0x%s) larger than 32 bits"), value); |
67c0d1eb | 8208 | macro_build (ep, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16); |
252b5132 RH |
8209 | return; |
8210 | } | |
8211 | ||
8212 | if (ep->X_op != O_big) | |
8213 | { | |
8214 | hi32 = *ep; | |
8215 | hi32.X_add_number = (valueT) hi32.X_add_number >> 16; | |
8216 | hi32.X_add_number = (valueT) hi32.X_add_number >> 16; | |
8217 | hi32.X_add_number &= 0xffffffff; | |
8218 | lo32 = *ep; | |
8219 | lo32.X_add_number &= 0xffffffff; | |
8220 | } | |
8221 | else | |
8222 | { | |
9c2799c2 | 8223 | gas_assert (ep->X_add_number > 2); |
252b5132 RH |
8224 | if (ep->X_add_number == 3) |
8225 | generic_bignum[3] = 0; | |
8226 | else if (ep->X_add_number > 4) | |
1661c76c | 8227 | as_bad (_("number larger than 64 bits")); |
252b5132 RH |
8228 | lo32.X_op = O_constant; |
8229 | lo32.X_add_number = generic_bignum[0] + (generic_bignum[1] << 16); | |
8230 | hi32.X_op = O_constant; | |
8231 | hi32.X_add_number = generic_bignum[2] + (generic_bignum[3] << 16); | |
8232 | } | |
8233 | ||
8234 | if (hi32.X_add_number == 0) | |
8235 | freg = 0; | |
8236 | else | |
8237 | { | |
8238 | int shift, bit; | |
8239 | unsigned long hi, lo; | |
8240 | ||
956cd1d6 | 8241 | if (hi32.X_add_number == (offsetT) 0xffffffff) |
beae10d5 KH |
8242 | { |
8243 | if ((lo32.X_add_number & 0xffff8000) == 0xffff8000) | |
8244 | { | |
67c0d1eb | 8245 | macro_build (&lo32, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16); |
beae10d5 KH |
8246 | return; |
8247 | } | |
8248 | if (lo32.X_add_number & 0x80000000) | |
8249 | { | |
df58fc94 | 8250 | macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16); |
252b5132 | 8251 | if (lo32.X_add_number & 0xffff) |
67c0d1eb | 8252 | macro_build (&lo32, "ori", "t,r,i", reg, reg, BFD_RELOC_LO16); |
beae10d5 KH |
8253 | return; |
8254 | } | |
8255 | } | |
252b5132 RH |
8256 | |
8257 | /* Check for 16bit shifted constant. We know that hi32 is | |
8258 | non-zero, so start the mask on the first bit of the hi32 | |
8259 | value. */ | |
8260 | shift = 17; | |
8261 | do | |
beae10d5 KH |
8262 | { |
8263 | unsigned long himask, lomask; | |
8264 | ||
8265 | if (shift < 32) | |
8266 | { | |
8267 | himask = 0xffff >> (32 - shift); | |
8268 | lomask = (0xffff << shift) & 0xffffffff; | |
8269 | } | |
8270 | else | |
8271 | { | |
8272 | himask = 0xffff << (shift - 32); | |
8273 | lomask = 0; | |
8274 | } | |
8275 | if ((hi32.X_add_number & ~(offsetT) himask) == 0 | |
8276 | && (lo32.X_add_number & ~(offsetT) lomask) == 0) | |
8277 | { | |
8278 | expressionS tmp; | |
8279 | ||
8280 | tmp.X_op = O_constant; | |
8281 | if (shift < 32) | |
8282 | tmp.X_add_number = ((hi32.X_add_number << (32 - shift)) | |
8283 | | (lo32.X_add_number >> shift)); | |
8284 | else | |
8285 | tmp.X_add_number = hi32.X_add_number >> (shift - 32); | |
67c0d1eb | 8286 | macro_build (&tmp, "ori", "t,r,i", reg, 0, BFD_RELOC_LO16); |
df58fc94 | 8287 | macro_build (NULL, (shift >= 32) ? "dsll32" : "dsll", SHFT_FMT, |
67c0d1eb | 8288 | reg, reg, (shift >= 32) ? shift - 32 : shift); |
beae10d5 KH |
8289 | return; |
8290 | } | |
f9419b05 | 8291 | ++shift; |
beae10d5 KH |
8292 | } |
8293 | while (shift <= (64 - 16)); | |
252b5132 RH |
8294 | |
8295 | /* Find the bit number of the lowest one bit, and store the | |
8296 | shifted value in hi/lo. */ | |
8297 | hi = (unsigned long) (hi32.X_add_number & 0xffffffff); | |
8298 | lo = (unsigned long) (lo32.X_add_number & 0xffffffff); | |
8299 | if (lo != 0) | |
8300 | { | |
8301 | bit = 0; | |
8302 | while ((lo & 1) == 0) | |
8303 | { | |
8304 | lo >>= 1; | |
8305 | ++bit; | |
8306 | } | |
8307 | lo |= (hi & (((unsigned long) 1 << bit) - 1)) << (32 - bit); | |
8308 | hi >>= bit; | |
8309 | } | |
8310 | else | |
8311 | { | |
8312 | bit = 32; | |
8313 | while ((hi & 1) == 0) | |
8314 | { | |
8315 | hi >>= 1; | |
8316 | ++bit; | |
8317 | } | |
8318 | lo = hi; | |
8319 | hi = 0; | |
8320 | } | |
8321 | ||
8322 | /* Optimize if the shifted value is a (power of 2) - 1. */ | |
8323 | if ((hi == 0 && ((lo + 1) & lo) == 0) | |
8324 | || (lo == 0xffffffff && ((hi + 1) & hi) == 0)) | |
beae10d5 KH |
8325 | { |
8326 | shift = COUNT_TOP_ZEROES ((unsigned int) hi32.X_add_number); | |
252b5132 | 8327 | if (shift != 0) |
beae10d5 | 8328 | { |
252b5132 RH |
8329 | expressionS tmp; |
8330 | ||
8331 | /* This instruction will set the register to be all | |
8332 | ones. */ | |
beae10d5 KH |
8333 | tmp.X_op = O_constant; |
8334 | tmp.X_add_number = (offsetT) -1; | |
67c0d1eb | 8335 | macro_build (&tmp, "addiu", "t,r,j", reg, 0, BFD_RELOC_LO16); |
beae10d5 KH |
8336 | if (bit != 0) |
8337 | { | |
8338 | bit += shift; | |
df58fc94 | 8339 | macro_build (NULL, (bit >= 32) ? "dsll32" : "dsll", SHFT_FMT, |
67c0d1eb | 8340 | reg, reg, (bit >= 32) ? bit - 32 : bit); |
beae10d5 | 8341 | } |
df58fc94 | 8342 | macro_build (NULL, (shift >= 32) ? "dsrl32" : "dsrl", SHFT_FMT, |
67c0d1eb | 8343 | reg, reg, (shift >= 32) ? shift - 32 : shift); |
beae10d5 KH |
8344 | return; |
8345 | } | |
8346 | } | |
252b5132 RH |
8347 | |
8348 | /* Sign extend hi32 before calling load_register, because we can | |
8349 | generally get better code when we load a sign extended value. */ | |
8350 | if ((hi32.X_add_number & 0x80000000) != 0) | |
beae10d5 | 8351 | hi32.X_add_number |= ~(offsetT) 0xffffffff; |
67c0d1eb | 8352 | load_register (reg, &hi32, 0); |
252b5132 RH |
8353 | freg = reg; |
8354 | } | |
8355 | if ((lo32.X_add_number & 0xffff0000) == 0) | |
8356 | { | |
8357 | if (freg != 0) | |
8358 | { | |
df58fc94 | 8359 | macro_build (NULL, "dsll32", SHFT_FMT, reg, freg, 0); |
252b5132 RH |
8360 | freg = reg; |
8361 | } | |
8362 | } | |
8363 | else | |
8364 | { | |
8365 | expressionS mid16; | |
8366 | ||
956cd1d6 | 8367 | if ((freg == 0) && (lo32.X_add_number == (offsetT) 0xffffffff)) |
beae10d5 | 8368 | { |
df58fc94 RS |
8369 | macro_build (&lo32, "lui", LUI_FMT, reg, BFD_RELOC_HI16); |
8370 | macro_build (NULL, "dsrl32", SHFT_FMT, reg, reg, 0); | |
beae10d5 KH |
8371 | return; |
8372 | } | |
252b5132 RH |
8373 | |
8374 | if (freg != 0) | |
8375 | { | |
df58fc94 | 8376 | macro_build (NULL, "dsll", SHFT_FMT, reg, freg, 16); |
252b5132 RH |
8377 | freg = reg; |
8378 | } | |
8379 | mid16 = lo32; | |
8380 | mid16.X_add_number >>= 16; | |
67c0d1eb | 8381 | macro_build (&mid16, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16); |
df58fc94 | 8382 | macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16); |
252b5132 RH |
8383 | freg = reg; |
8384 | } | |
8385 | if ((lo32.X_add_number & 0xffff) != 0) | |
67c0d1eb | 8386 | macro_build (&lo32, "ori", "t,r,i", reg, freg, BFD_RELOC_LO16); |
252b5132 RH |
8387 | } |
8388 | ||
269137b2 TS |
8389 | static inline void |
8390 | load_delay_nop (void) | |
8391 | { | |
8392 | if (!gpr_interlocks) | |
8393 | macro_build (NULL, "nop", ""); | |
8394 | } | |
8395 | ||
252b5132 RH |
8396 | /* Load an address into a register. */ |
8397 | ||
8398 | static void | |
67c0d1eb | 8399 | load_address (int reg, expressionS *ep, int *used_at) |
252b5132 | 8400 | { |
252b5132 RH |
8401 | if (ep->X_op != O_constant |
8402 | && ep->X_op != O_symbol) | |
8403 | { | |
8404 | as_bad (_("expression too complex")); | |
8405 | ep->X_op = O_constant; | |
8406 | } | |
8407 | ||
8408 | if (ep->X_op == O_constant) | |
8409 | { | |
67c0d1eb | 8410 | load_register (reg, ep, HAVE_64BIT_ADDRESSES); |
252b5132 RH |
8411 | return; |
8412 | } | |
8413 | ||
8414 | if (mips_pic == NO_PIC) | |
8415 | { | |
8416 | /* If this is a reference to a GP relative symbol, we want | |
cdf6fd85 | 8417 | addiu $reg,$gp,<sym> (BFD_RELOC_GPREL16) |
252b5132 RH |
8418 | Otherwise we want |
8419 | lui $reg,<sym> (BFD_RELOC_HI16_S) | |
8420 | addiu $reg,$reg,<sym> (BFD_RELOC_LO16) | |
d6bc6245 | 8421 | If we have an addend, we always use the latter form. |
76b3015f | 8422 | |
d6bc6245 TS |
8423 | With 64bit address space and a usable $at we want |
8424 | lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
8425 | lui $at,<sym> (BFD_RELOC_HI16_S) | |
8426 | daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
8427 | daddiu $at,<sym> (BFD_RELOC_LO16) | |
8428 | dsll32 $reg,0 | |
3a482fd5 | 8429 | daddu $reg,$reg,$at |
76b3015f | 8430 | |
c03099e6 | 8431 | If $at is already in use, we use a path which is suboptimal |
d6bc6245 TS |
8432 | on superscalar processors. |
8433 | lui $reg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
8434 | daddiu $reg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
8435 | dsll $reg,16 | |
8436 | daddiu $reg,<sym> (BFD_RELOC_HI16_S) | |
8437 | dsll $reg,16 | |
8438 | daddiu $reg,<sym> (BFD_RELOC_LO16) | |
6caf9ef4 TS |
8439 | |
8440 | For GP relative symbols in 64bit address space we can use | |
8441 | the same sequence as in 32bit address space. */ | |
aed1a261 | 8442 | if (HAVE_64BIT_SYMBOLS) |
d6bc6245 | 8443 | { |
6caf9ef4 TS |
8444 | if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET |
8445 | && !nopic_need_relax (ep->X_add_symbol, 1)) | |
8446 | { | |
8447 | relax_start (ep->X_add_symbol); | |
8448 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, | |
8449 | mips_gp_register, BFD_RELOC_GPREL16); | |
8450 | relax_switch (); | |
8451 | } | |
d6bc6245 | 8452 | |
741fe287 | 8453 | if (*used_at == 0 && mips_opts.at) |
d6bc6245 | 8454 | { |
df58fc94 RS |
8455 | macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST); |
8456 | macro_build (ep, "lui", LUI_FMT, AT, BFD_RELOC_HI16_S); | |
67c0d1eb RS |
8457 | macro_build (ep, "daddiu", "t,r,j", reg, reg, |
8458 | BFD_RELOC_MIPS_HIGHER); | |
8459 | macro_build (ep, "daddiu", "t,r,j", AT, AT, BFD_RELOC_LO16); | |
df58fc94 | 8460 | macro_build (NULL, "dsll32", SHFT_FMT, reg, reg, 0); |
67c0d1eb | 8461 | macro_build (NULL, "daddu", "d,v,t", reg, reg, AT); |
d6bc6245 TS |
8462 | *used_at = 1; |
8463 | } | |
8464 | else | |
8465 | { | |
df58fc94 | 8466 | macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_HIGHEST); |
67c0d1eb RS |
8467 | macro_build (ep, "daddiu", "t,r,j", reg, reg, |
8468 | BFD_RELOC_MIPS_HIGHER); | |
df58fc94 | 8469 | macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16); |
67c0d1eb | 8470 | macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_HI16_S); |
df58fc94 | 8471 | macro_build (NULL, "dsll", SHFT_FMT, reg, reg, 16); |
67c0d1eb | 8472 | macro_build (ep, "daddiu", "t,r,j", reg, reg, BFD_RELOC_LO16); |
d6bc6245 | 8473 | } |
6caf9ef4 TS |
8474 | |
8475 | if (mips_relax.sequence) | |
8476 | relax_end (); | |
d6bc6245 | 8477 | } |
252b5132 RH |
8478 | else |
8479 | { | |
d6bc6245 | 8480 | if ((valueT) ep->X_add_number <= MAX_GPREL_OFFSET |
6caf9ef4 | 8481 | && !nopic_need_relax (ep->X_add_symbol, 1)) |
d6bc6245 | 8482 | { |
4d7206a2 | 8483 | relax_start (ep->X_add_symbol); |
67c0d1eb | 8484 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, |
17a2f251 | 8485 | mips_gp_register, BFD_RELOC_GPREL16); |
4d7206a2 | 8486 | relax_switch (); |
d6bc6245 | 8487 | } |
67c0d1eb RS |
8488 | macro_build_lui (ep, reg); |
8489 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", | |
8490 | reg, reg, BFD_RELOC_LO16); | |
4d7206a2 RS |
8491 | if (mips_relax.sequence) |
8492 | relax_end (); | |
d6bc6245 | 8493 | } |
252b5132 | 8494 | } |
0a44bf69 | 8495 | else if (!mips_big_got) |
252b5132 RH |
8496 | { |
8497 | expressionS ex; | |
8498 | ||
8499 | /* If this is a reference to an external symbol, we want | |
8500 | lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
8501 | Otherwise we want | |
8502 | lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
8503 | nop | |
8504 | addiu $reg,$reg,<sym> (BFD_RELOC_LO16) | |
f5040a92 AO |
8505 | If there is a constant, it must be added in after. |
8506 | ||
ed6fb7bd | 8507 | If we have NewABI, we want |
f5040a92 AO |
8508 | lw $reg,<sym+cst>($gp) (BFD_RELOC_MIPS_GOT_DISP) |
8509 | unless we're referencing a global symbol with a non-zero | |
8510 | offset, in which case cst must be added separately. */ | |
ed6fb7bd SC |
8511 | if (HAVE_NEWABI) |
8512 | { | |
f5040a92 AO |
8513 | if (ep->X_add_number) |
8514 | { | |
4d7206a2 | 8515 | ex.X_add_number = ep->X_add_number; |
f5040a92 | 8516 | ep->X_add_number = 0; |
4d7206a2 | 8517 | relax_start (ep->X_add_symbol); |
67c0d1eb RS |
8518 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg, |
8519 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); | |
f5040a92 AO |
8520 | if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000) |
8521 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
8522 | ex.X_op = O_constant; | |
67c0d1eb | 8523 | macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", |
17a2f251 | 8524 | reg, reg, BFD_RELOC_LO16); |
f5040a92 | 8525 | ep->X_add_number = ex.X_add_number; |
4d7206a2 | 8526 | relax_switch (); |
f5040a92 | 8527 | } |
67c0d1eb | 8528 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg, |
17a2f251 | 8529 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); |
4d7206a2 RS |
8530 | if (mips_relax.sequence) |
8531 | relax_end (); | |
ed6fb7bd SC |
8532 | } |
8533 | else | |
8534 | { | |
f5040a92 AO |
8535 | ex.X_add_number = ep->X_add_number; |
8536 | ep->X_add_number = 0; | |
67c0d1eb RS |
8537 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg, |
8538 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
269137b2 | 8539 | load_delay_nop (); |
4d7206a2 RS |
8540 | relax_start (ep->X_add_symbol); |
8541 | relax_switch (); | |
67c0d1eb | 8542 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg, |
17a2f251 | 8543 | BFD_RELOC_LO16); |
4d7206a2 | 8544 | relax_end (); |
ed6fb7bd | 8545 | |
f5040a92 AO |
8546 | if (ex.X_add_number != 0) |
8547 | { | |
8548 | if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000) | |
8549 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
8550 | ex.X_op = O_constant; | |
67c0d1eb | 8551 | macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", |
17a2f251 | 8552 | reg, reg, BFD_RELOC_LO16); |
f5040a92 | 8553 | } |
252b5132 RH |
8554 | } |
8555 | } | |
0a44bf69 | 8556 | else if (mips_big_got) |
252b5132 RH |
8557 | { |
8558 | expressionS ex; | |
252b5132 RH |
8559 | |
8560 | /* This is the large GOT case. If this is a reference to an | |
8561 | external symbol, we want | |
8562 | lui $reg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
8563 | addu $reg,$reg,$gp | |
8564 | lw $reg,<sym>($reg) (BFD_RELOC_MIPS_GOT_LO16) | |
f5040a92 AO |
8565 | |
8566 | Otherwise, for a reference to a local symbol in old ABI, we want | |
252b5132 RH |
8567 | lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) |
8568 | nop | |
8569 | addiu $reg,$reg,<sym> (BFD_RELOC_LO16) | |
684022ea | 8570 | If there is a constant, it must be added in after. |
f5040a92 AO |
8571 | |
8572 | In the NewABI, for local symbols, with or without offsets, we want: | |
438c16b8 TS |
8573 | lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE) |
8574 | addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST) | |
f5040a92 | 8575 | */ |
438c16b8 TS |
8576 | if (HAVE_NEWABI) |
8577 | { | |
4d7206a2 | 8578 | ex.X_add_number = ep->X_add_number; |
f5040a92 | 8579 | ep->X_add_number = 0; |
4d7206a2 | 8580 | relax_start (ep->X_add_symbol); |
df58fc94 | 8581 | macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16); |
67c0d1eb RS |
8582 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
8583 | reg, reg, mips_gp_register); | |
8584 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", | |
8585 | reg, BFD_RELOC_MIPS_GOT_LO16, reg); | |
f5040a92 AO |
8586 | if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000) |
8587 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
8588 | else if (ex.X_add_number) | |
8589 | { | |
8590 | ex.X_op = O_constant; | |
67c0d1eb RS |
8591 | macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg, |
8592 | BFD_RELOC_LO16); | |
f5040a92 AO |
8593 | } |
8594 | ||
8595 | ep->X_add_number = ex.X_add_number; | |
4d7206a2 | 8596 | relax_switch (); |
67c0d1eb | 8597 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg, |
17a2f251 | 8598 | BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register); |
67c0d1eb RS |
8599 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg, |
8600 | BFD_RELOC_MIPS_GOT_OFST); | |
4d7206a2 | 8601 | relax_end (); |
438c16b8 | 8602 | } |
252b5132 | 8603 | else |
438c16b8 | 8604 | { |
f5040a92 AO |
8605 | ex.X_add_number = ep->X_add_number; |
8606 | ep->X_add_number = 0; | |
4d7206a2 | 8607 | relax_start (ep->X_add_symbol); |
df58fc94 | 8608 | macro_build (ep, "lui", LUI_FMT, reg, BFD_RELOC_MIPS_GOT_HI16); |
67c0d1eb RS |
8609 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
8610 | reg, reg, mips_gp_register); | |
8611 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", | |
8612 | reg, BFD_RELOC_MIPS_GOT_LO16, reg); | |
4d7206a2 RS |
8613 | relax_switch (); |
8614 | if (reg_needs_delay (mips_gp_register)) | |
438c16b8 TS |
8615 | { |
8616 | /* We need a nop before loading from $gp. This special | |
8617 | check is required because the lui which starts the main | |
8618 | instruction stream does not refer to $gp, and so will not | |
8619 | insert the nop which may be required. */ | |
67c0d1eb | 8620 | macro_build (NULL, "nop", ""); |
438c16b8 | 8621 | } |
67c0d1eb | 8622 | macro_build (ep, ADDRESS_LOAD_INSN, "t,o(b)", reg, |
17a2f251 | 8623 | BFD_RELOC_MIPS_GOT16, mips_gp_register); |
269137b2 | 8624 | load_delay_nop (); |
67c0d1eb | 8625 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", reg, reg, |
17a2f251 | 8626 | BFD_RELOC_LO16); |
4d7206a2 | 8627 | relax_end (); |
438c16b8 | 8628 | |
f5040a92 AO |
8629 | if (ex.X_add_number != 0) |
8630 | { | |
8631 | if (ex.X_add_number < -0x8000 || ex.X_add_number >= 0x8000) | |
8632 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
8633 | ex.X_op = O_constant; | |
67c0d1eb RS |
8634 | macro_build (&ex, ADDRESS_ADDI_INSN, "t,r,j", reg, reg, |
8635 | BFD_RELOC_LO16); | |
f5040a92 | 8636 | } |
252b5132 RH |
8637 | } |
8638 | } | |
252b5132 RH |
8639 | else |
8640 | abort (); | |
8fc2e39e | 8641 | |
741fe287 | 8642 | if (!mips_opts.at && *used_at == 1) |
1661c76c | 8643 | as_bad (_("macro used $at after \".set noat\"")); |
252b5132 RH |
8644 | } |
8645 | ||
ea1fb5dc RS |
8646 | /* Move the contents of register SOURCE into register DEST. */ |
8647 | ||
8648 | static void | |
67c0d1eb | 8649 | move_register (int dest, int source) |
ea1fb5dc | 8650 | { |
df58fc94 RS |
8651 | /* Prefer to use a 16-bit microMIPS instruction unless the previous |
8652 | instruction specifically requires a 32-bit one. */ | |
8653 | if (mips_opts.micromips | |
833794fc | 8654 | && !mips_opts.insn32 |
df58fc94 | 8655 | && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT)) |
7951ca42 | 8656 | macro_build (NULL, "move", "mp,mj", dest, source); |
df58fc94 RS |
8657 | else |
8658 | macro_build (NULL, HAVE_32BIT_GPRS ? "addu" : "daddu", "d,v,t", | |
8659 | dest, source, 0); | |
ea1fb5dc RS |
8660 | } |
8661 | ||
4d7206a2 | 8662 | /* Emit an SVR4 PIC sequence to load address LOCAL into DEST, where |
f6a22291 MR |
8663 | LOCAL is the sum of a symbol and a 16-bit or 32-bit displacement. |
8664 | The two alternatives are: | |
4d7206a2 RS |
8665 | |
8666 | Global symbol Local sybmol | |
8667 | ------------- ------------ | |
8668 | lw DEST,%got(SYMBOL) lw DEST,%got(SYMBOL + OFFSET) | |
8669 | ... ... | |
8670 | addiu DEST,DEST,OFFSET addiu DEST,DEST,%lo(SYMBOL + OFFSET) | |
8671 | ||
8672 | load_got_offset emits the first instruction and add_got_offset | |
f6a22291 MR |
8673 | emits the second for a 16-bit offset or add_got_offset_hilo emits |
8674 | a sequence to add a 32-bit offset using a scratch register. */ | |
4d7206a2 RS |
8675 | |
8676 | static void | |
67c0d1eb | 8677 | load_got_offset (int dest, expressionS *local) |
4d7206a2 RS |
8678 | { |
8679 | expressionS global; | |
8680 | ||
8681 | global = *local; | |
8682 | global.X_add_number = 0; | |
8683 | ||
8684 | relax_start (local->X_add_symbol); | |
67c0d1eb RS |
8685 | macro_build (&global, ADDRESS_LOAD_INSN, "t,o(b)", dest, |
8686 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
4d7206a2 | 8687 | relax_switch (); |
67c0d1eb RS |
8688 | macro_build (local, ADDRESS_LOAD_INSN, "t,o(b)", dest, |
8689 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
4d7206a2 RS |
8690 | relax_end (); |
8691 | } | |
8692 | ||
8693 | static void | |
67c0d1eb | 8694 | add_got_offset (int dest, expressionS *local) |
4d7206a2 RS |
8695 | { |
8696 | expressionS global; | |
8697 | ||
8698 | global.X_op = O_constant; | |
8699 | global.X_op_symbol = NULL; | |
8700 | global.X_add_symbol = NULL; | |
8701 | global.X_add_number = local->X_add_number; | |
8702 | ||
8703 | relax_start (local->X_add_symbol); | |
67c0d1eb | 8704 | macro_build (&global, ADDRESS_ADDI_INSN, "t,r,j", |
4d7206a2 RS |
8705 | dest, dest, BFD_RELOC_LO16); |
8706 | relax_switch (); | |
67c0d1eb | 8707 | macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", dest, dest, BFD_RELOC_LO16); |
4d7206a2 RS |
8708 | relax_end (); |
8709 | } | |
8710 | ||
f6a22291 MR |
8711 | static void |
8712 | add_got_offset_hilo (int dest, expressionS *local, int tmp) | |
8713 | { | |
8714 | expressionS global; | |
8715 | int hold_mips_optimize; | |
8716 | ||
8717 | global.X_op = O_constant; | |
8718 | global.X_op_symbol = NULL; | |
8719 | global.X_add_symbol = NULL; | |
8720 | global.X_add_number = local->X_add_number; | |
8721 | ||
8722 | relax_start (local->X_add_symbol); | |
8723 | load_register (tmp, &global, HAVE_64BIT_ADDRESSES); | |
8724 | relax_switch (); | |
8725 | /* Set mips_optimize around the lui instruction to avoid | |
8726 | inserting an unnecessary nop after the lw. */ | |
8727 | hold_mips_optimize = mips_optimize; | |
8728 | mips_optimize = 2; | |
8729 | macro_build_lui (&global, tmp); | |
8730 | mips_optimize = hold_mips_optimize; | |
8731 | macro_build (local, ADDRESS_ADDI_INSN, "t,r,j", tmp, tmp, BFD_RELOC_LO16); | |
8732 | relax_end (); | |
8733 | ||
8734 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dest, dest, tmp); | |
8735 | } | |
8736 | ||
df58fc94 RS |
8737 | /* Emit a sequence of instructions to emulate a branch likely operation. |
8738 | BR is an ordinary branch corresponding to one to be emulated. BRNEG | |
8739 | is its complementing branch with the original condition negated. | |
8740 | CALL is set if the original branch specified the link operation. | |
8741 | EP, FMT, SREG and TREG specify the usual macro_build() parameters. | |
8742 | ||
8743 | Code like this is produced in the noreorder mode: | |
8744 | ||
8745 | BRNEG <args>, 1f | |
8746 | nop | |
8747 | b <sym> | |
8748 | delay slot (executed only if branch taken) | |
8749 | 1: | |
8750 | ||
8751 | or, if CALL is set: | |
8752 | ||
8753 | BRNEG <args>, 1f | |
8754 | nop | |
8755 | bal <sym> | |
8756 | delay slot (executed only if branch taken) | |
8757 | 1: | |
8758 | ||
8759 | In the reorder mode the delay slot would be filled with a nop anyway, | |
8760 | so code produced is simply: | |
8761 | ||
8762 | BR <args>, <sym> | |
8763 | nop | |
8764 | ||
8765 | This function is used when producing code for the microMIPS ASE that | |
8766 | does not implement branch likely instructions in hardware. */ | |
8767 | ||
8768 | static void | |
8769 | macro_build_branch_likely (const char *br, const char *brneg, | |
8770 | int call, expressionS *ep, const char *fmt, | |
8771 | unsigned int sreg, unsigned int treg) | |
8772 | { | |
8773 | int noreorder = mips_opts.noreorder; | |
8774 | expressionS expr1; | |
8775 | ||
8776 | gas_assert (mips_opts.micromips); | |
8777 | start_noreorder (); | |
8778 | if (noreorder) | |
8779 | { | |
8780 | micromips_label_expr (&expr1); | |
8781 | macro_build (&expr1, brneg, fmt, sreg, treg); | |
8782 | macro_build (NULL, "nop", ""); | |
8783 | macro_build (ep, call ? "bal" : "b", "p"); | |
8784 | ||
8785 | /* Set to true so that append_insn adds a label. */ | |
8786 | emit_branch_likely_macro = TRUE; | |
8787 | } | |
8788 | else | |
8789 | { | |
8790 | macro_build (ep, br, fmt, sreg, treg); | |
8791 | macro_build (NULL, "nop", ""); | |
8792 | } | |
8793 | end_noreorder (); | |
8794 | } | |
8795 | ||
8796 | /* Emit a coprocessor branch-likely macro specified by TYPE, using CC as | |
8797 | the condition code tested. EP specifies the branch target. */ | |
8798 | ||
8799 | static void | |
8800 | macro_build_branch_ccl (int type, expressionS *ep, unsigned int cc) | |
8801 | { | |
8802 | const int call = 0; | |
8803 | const char *brneg; | |
8804 | const char *br; | |
8805 | ||
8806 | switch (type) | |
8807 | { | |
8808 | case M_BC1FL: | |
8809 | br = "bc1f"; | |
8810 | brneg = "bc1t"; | |
8811 | break; | |
8812 | case M_BC1TL: | |
8813 | br = "bc1t"; | |
8814 | brneg = "bc1f"; | |
8815 | break; | |
8816 | case M_BC2FL: | |
8817 | br = "bc2f"; | |
8818 | brneg = "bc2t"; | |
8819 | break; | |
8820 | case M_BC2TL: | |
8821 | br = "bc2t"; | |
8822 | brneg = "bc2f"; | |
8823 | break; | |
8824 | default: | |
8825 | abort (); | |
8826 | } | |
8827 | macro_build_branch_likely (br, brneg, call, ep, "N,p", cc, ZERO); | |
8828 | } | |
8829 | ||
8830 | /* Emit a two-argument branch macro specified by TYPE, using SREG as | |
8831 | the register tested. EP specifies the branch target. */ | |
8832 | ||
8833 | static void | |
8834 | macro_build_branch_rs (int type, expressionS *ep, unsigned int sreg) | |
8835 | { | |
8836 | const char *brneg = NULL; | |
8837 | const char *br; | |
8838 | int call = 0; | |
8839 | ||
8840 | switch (type) | |
8841 | { | |
8842 | case M_BGEZ: | |
8843 | br = "bgez"; | |
8844 | break; | |
8845 | case M_BGEZL: | |
8846 | br = mips_opts.micromips ? "bgez" : "bgezl"; | |
8847 | brneg = "bltz"; | |
8848 | break; | |
8849 | case M_BGEZALL: | |
8850 | gas_assert (mips_opts.micromips); | |
833794fc | 8851 | br = mips_opts.insn32 ? "bgezal" : "bgezals"; |
df58fc94 RS |
8852 | brneg = "bltz"; |
8853 | call = 1; | |
8854 | break; | |
8855 | case M_BGTZ: | |
8856 | br = "bgtz"; | |
8857 | break; | |
8858 | case M_BGTZL: | |
8859 | br = mips_opts.micromips ? "bgtz" : "bgtzl"; | |
8860 | brneg = "blez"; | |
8861 | break; | |
8862 | case M_BLEZ: | |
8863 | br = "blez"; | |
8864 | break; | |
8865 | case M_BLEZL: | |
8866 | br = mips_opts.micromips ? "blez" : "blezl"; | |
8867 | brneg = "bgtz"; | |
8868 | break; | |
8869 | case M_BLTZ: | |
8870 | br = "bltz"; | |
8871 | break; | |
8872 | case M_BLTZL: | |
8873 | br = mips_opts.micromips ? "bltz" : "bltzl"; | |
8874 | brneg = "bgez"; | |
8875 | break; | |
8876 | case M_BLTZALL: | |
8877 | gas_assert (mips_opts.micromips); | |
833794fc | 8878 | br = mips_opts.insn32 ? "bltzal" : "bltzals"; |
df58fc94 RS |
8879 | brneg = "bgez"; |
8880 | call = 1; | |
8881 | break; | |
8882 | default: | |
8883 | abort (); | |
8884 | } | |
8885 | if (mips_opts.micromips && brneg) | |
8886 | macro_build_branch_likely (br, brneg, call, ep, "s,p", sreg, ZERO); | |
8887 | else | |
8888 | macro_build (ep, br, "s,p", sreg); | |
8889 | } | |
8890 | ||
8891 | /* Emit a three-argument branch macro specified by TYPE, using SREG and | |
8892 | TREG as the registers tested. EP specifies the branch target. */ | |
8893 | ||
8894 | static void | |
8895 | macro_build_branch_rsrt (int type, expressionS *ep, | |
8896 | unsigned int sreg, unsigned int treg) | |
8897 | { | |
8898 | const char *brneg = NULL; | |
8899 | const int call = 0; | |
8900 | const char *br; | |
8901 | ||
8902 | switch (type) | |
8903 | { | |
8904 | case M_BEQ: | |
8905 | case M_BEQ_I: | |
8906 | br = "beq"; | |
8907 | break; | |
8908 | case M_BEQL: | |
8909 | case M_BEQL_I: | |
8910 | br = mips_opts.micromips ? "beq" : "beql"; | |
8911 | brneg = "bne"; | |
8912 | break; | |
8913 | case M_BNE: | |
8914 | case M_BNE_I: | |
8915 | br = "bne"; | |
8916 | break; | |
8917 | case M_BNEL: | |
8918 | case M_BNEL_I: | |
8919 | br = mips_opts.micromips ? "bne" : "bnel"; | |
8920 | brneg = "beq"; | |
8921 | break; | |
8922 | default: | |
8923 | abort (); | |
8924 | } | |
8925 | if (mips_opts.micromips && brneg) | |
8926 | macro_build_branch_likely (br, brneg, call, ep, "s,t,p", sreg, treg); | |
8927 | else | |
8928 | macro_build (ep, br, "s,t,p", sreg, treg); | |
8929 | } | |
8930 | ||
f2ae14a1 RS |
8931 | /* Return the high part that should be loaded in order to make the low |
8932 | part of VALUE accessible using an offset of OFFBITS bits. */ | |
8933 | ||
8934 | static offsetT | |
8935 | offset_high_part (offsetT value, unsigned int offbits) | |
8936 | { | |
8937 | offsetT bias; | |
8938 | addressT low_mask; | |
8939 | ||
8940 | if (offbits == 0) | |
8941 | return value; | |
8942 | bias = 1 << (offbits - 1); | |
8943 | low_mask = bias * 2 - 1; | |
8944 | return (value + bias) & ~low_mask; | |
8945 | } | |
8946 | ||
8947 | /* Return true if the value stored in offset_expr and offset_reloc | |
8948 | fits into a signed offset of OFFBITS bits. RANGE is the maximum | |
8949 | amount that the caller wants to add without inducing overflow | |
8950 | and ALIGN is the known alignment of the value in bytes. */ | |
8951 | ||
8952 | static bfd_boolean | |
8953 | small_offset_p (unsigned int range, unsigned int align, unsigned int offbits) | |
8954 | { | |
8955 | if (offbits == 16) | |
8956 | { | |
8957 | /* Accept any relocation operator if overflow isn't a concern. */ | |
8958 | if (range < align && *offset_reloc != BFD_RELOC_UNUSED) | |
8959 | return TRUE; | |
8960 | ||
8961 | /* These relocations are guaranteed not to overflow in correct links. */ | |
8962 | if (*offset_reloc == BFD_RELOC_MIPS_LITERAL | |
8963 | || gprel16_reloc_p (*offset_reloc)) | |
8964 | return TRUE; | |
8965 | } | |
8966 | if (offset_expr.X_op == O_constant | |
8967 | && offset_high_part (offset_expr.X_add_number, offbits) == 0 | |
8968 | && offset_high_part (offset_expr.X_add_number + range, offbits) == 0) | |
8969 | return TRUE; | |
8970 | return FALSE; | |
8971 | } | |
8972 | ||
252b5132 RH |
8973 | /* |
8974 | * Build macros | |
8975 | * This routine implements the seemingly endless macro or synthesized | |
8976 | * instructions and addressing modes in the mips assembly language. Many | |
8977 | * of these macros are simple and are similar to each other. These could | |
67c1ffbe | 8978 | * probably be handled by some kind of table or grammar approach instead of |
252b5132 RH |
8979 | * this verbose method. Others are not simple macros but are more like |
8980 | * optimizing code generation. | |
8981 | * One interesting optimization is when several store macros appear | |
67c1ffbe | 8982 | * consecutively that would load AT with the upper half of the same address. |
252b5132 RH |
8983 | * The ensuing load upper instructions are ommited. This implies some kind |
8984 | * of global optimization. We currently only optimize within a single macro. | |
8985 | * For many of the load and store macros if the address is specified as a | |
8986 | * constant expression in the first 64k of memory (ie ld $2,0x4000c) we | |
8987 | * first load register 'at' with zero and use it as the base register. The | |
8988 | * mips assembler simply uses register $zero. Just one tiny optimization | |
8989 | * we're missing. | |
8990 | */ | |
8991 | static void | |
833794fc | 8992 | macro (struct mips_cl_insn *ip, char *str) |
252b5132 | 8993 | { |
c0ebe874 RS |
8994 | const struct mips_operand_array *operands; |
8995 | unsigned int breg, i; | |
741fe287 | 8996 | unsigned int tempreg; |
252b5132 | 8997 | int mask; |
43841e91 | 8998 | int used_at = 0; |
df58fc94 | 8999 | expressionS label_expr; |
252b5132 | 9000 | expressionS expr1; |
df58fc94 | 9001 | expressionS *ep; |
252b5132 RH |
9002 | const char *s; |
9003 | const char *s2; | |
9004 | const char *fmt; | |
9005 | int likely = 0; | |
252b5132 | 9006 | int coproc = 0; |
7f3c4072 | 9007 | int offbits = 16; |
1abe91b1 | 9008 | int call = 0; |
df58fc94 RS |
9009 | int jals = 0; |
9010 | int dbl = 0; | |
9011 | int imm = 0; | |
9012 | int ust = 0; | |
9013 | int lp = 0; | |
f2ae14a1 | 9014 | bfd_boolean large_offset; |
252b5132 | 9015 | int off; |
252b5132 | 9016 | int hold_mips_optimize; |
f2ae14a1 | 9017 | unsigned int align; |
c0ebe874 | 9018 | unsigned int op[MAX_OPERANDS]; |
252b5132 | 9019 | |
9c2799c2 | 9020 | gas_assert (! mips_opts.mips16); |
252b5132 | 9021 | |
c0ebe874 RS |
9022 | operands = insn_operands (ip); |
9023 | for (i = 0; i < MAX_OPERANDS; i++) | |
9024 | if (operands->operand[i]) | |
9025 | op[i] = insn_extract_operand (ip, operands->operand[i]); | |
9026 | else | |
9027 | op[i] = -1; | |
9028 | ||
252b5132 RH |
9029 | mask = ip->insn_mo->mask; |
9030 | ||
df58fc94 RS |
9031 | label_expr.X_op = O_constant; |
9032 | label_expr.X_op_symbol = NULL; | |
9033 | label_expr.X_add_symbol = NULL; | |
9034 | label_expr.X_add_number = 0; | |
9035 | ||
252b5132 RH |
9036 | expr1.X_op = O_constant; |
9037 | expr1.X_op_symbol = NULL; | |
9038 | expr1.X_add_symbol = NULL; | |
9039 | expr1.X_add_number = 1; | |
f2ae14a1 | 9040 | align = 1; |
252b5132 RH |
9041 | |
9042 | switch (mask) | |
9043 | { | |
9044 | case M_DABS: | |
9045 | dbl = 1; | |
9046 | case M_ABS: | |
df58fc94 RS |
9047 | /* bgez $a0,1f |
9048 | move v0,$a0 | |
9049 | sub v0,$zero,$a0 | |
9050 | 1: | |
9051 | */ | |
252b5132 | 9052 | |
7d10b47d | 9053 | start_noreorder (); |
252b5132 | 9054 | |
df58fc94 RS |
9055 | if (mips_opts.micromips) |
9056 | micromips_label_expr (&label_expr); | |
9057 | else | |
9058 | label_expr.X_add_number = 8; | |
c0ebe874 RS |
9059 | macro_build (&label_expr, "bgez", "s,p", op[1]); |
9060 | if (op[0] == op[1]) | |
a605d2b3 | 9061 | macro_build (NULL, "nop", ""); |
252b5132 | 9062 | else |
c0ebe874 RS |
9063 | move_register (op[0], op[1]); |
9064 | macro_build (NULL, dbl ? "dsub" : "sub", "d,v,t", op[0], 0, op[1]); | |
df58fc94 RS |
9065 | if (mips_opts.micromips) |
9066 | micromips_add_label (); | |
252b5132 | 9067 | |
7d10b47d | 9068 | end_noreorder (); |
8fc2e39e | 9069 | break; |
252b5132 RH |
9070 | |
9071 | case M_ADD_I: | |
9072 | s = "addi"; | |
9073 | s2 = "add"; | |
9074 | goto do_addi; | |
9075 | case M_ADDU_I: | |
9076 | s = "addiu"; | |
9077 | s2 = "addu"; | |
9078 | goto do_addi; | |
9079 | case M_DADD_I: | |
9080 | dbl = 1; | |
9081 | s = "daddi"; | |
9082 | s2 = "dadd"; | |
df58fc94 RS |
9083 | if (!mips_opts.micromips) |
9084 | goto do_addi; | |
b0e6f033 | 9085 | if (imm_expr.X_add_number >= -0x200 |
df58fc94 RS |
9086 | && imm_expr.X_add_number < 0x200) |
9087 | { | |
b0e6f033 RS |
9088 | macro_build (NULL, s, "t,r,.", op[0], op[1], |
9089 | (int) imm_expr.X_add_number); | |
df58fc94 RS |
9090 | break; |
9091 | } | |
9092 | goto do_addi_i; | |
252b5132 RH |
9093 | case M_DADDU_I: |
9094 | dbl = 1; | |
9095 | s = "daddiu"; | |
9096 | s2 = "daddu"; | |
9097 | do_addi: | |
b0e6f033 | 9098 | if (imm_expr.X_add_number >= -0x8000 |
252b5132 RH |
9099 | && imm_expr.X_add_number < 0x8000) |
9100 | { | |
c0ebe874 | 9101 | macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16); |
8fc2e39e | 9102 | break; |
252b5132 | 9103 | } |
df58fc94 | 9104 | do_addi_i: |
8fc2e39e | 9105 | used_at = 1; |
67c0d1eb | 9106 | load_register (AT, &imm_expr, dbl); |
c0ebe874 | 9107 | macro_build (NULL, s2, "d,v,t", op[0], op[1], AT); |
252b5132 RH |
9108 | break; |
9109 | ||
9110 | case M_AND_I: | |
9111 | s = "andi"; | |
9112 | s2 = "and"; | |
9113 | goto do_bit; | |
9114 | case M_OR_I: | |
9115 | s = "ori"; | |
9116 | s2 = "or"; | |
9117 | goto do_bit; | |
9118 | case M_NOR_I: | |
9119 | s = ""; | |
9120 | s2 = "nor"; | |
9121 | goto do_bit; | |
9122 | case M_XOR_I: | |
9123 | s = "xori"; | |
9124 | s2 = "xor"; | |
9125 | do_bit: | |
b0e6f033 | 9126 | if (imm_expr.X_add_number >= 0 |
252b5132 RH |
9127 | && imm_expr.X_add_number < 0x10000) |
9128 | { | |
9129 | if (mask != M_NOR_I) | |
c0ebe874 | 9130 | macro_build (&imm_expr, s, "t,r,i", op[0], op[1], BFD_RELOC_LO16); |
252b5132 RH |
9131 | else |
9132 | { | |
67c0d1eb | 9133 | macro_build (&imm_expr, "ori", "t,r,i", |
c0ebe874 RS |
9134 | op[0], op[1], BFD_RELOC_LO16); |
9135 | macro_build (NULL, "nor", "d,v,t", op[0], op[0], 0); | |
252b5132 | 9136 | } |
8fc2e39e | 9137 | break; |
252b5132 RH |
9138 | } |
9139 | ||
8fc2e39e | 9140 | used_at = 1; |
67c0d1eb | 9141 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 9142 | macro_build (NULL, s2, "d,v,t", op[0], op[1], AT); |
252b5132 RH |
9143 | break; |
9144 | ||
8b082fb1 TS |
9145 | case M_BALIGN: |
9146 | switch (imm_expr.X_add_number) | |
9147 | { | |
9148 | case 0: | |
9149 | macro_build (NULL, "nop", ""); | |
9150 | break; | |
9151 | case 2: | |
c0ebe874 | 9152 | macro_build (NULL, "packrl.ph", "d,s,t", op[0], op[0], op[1]); |
8b082fb1 | 9153 | break; |
03f66e8a MR |
9154 | case 1: |
9155 | case 3: | |
c0ebe874 | 9156 | macro_build (NULL, "balign", "t,s,2", op[0], op[1], |
90ecf173 | 9157 | (int) imm_expr.X_add_number); |
8b082fb1 | 9158 | break; |
03f66e8a MR |
9159 | default: |
9160 | as_bad (_("BALIGN immediate not 0, 1, 2 or 3 (%lu)"), | |
9161 | (unsigned long) imm_expr.X_add_number); | |
9162 | break; | |
8b082fb1 TS |
9163 | } |
9164 | break; | |
9165 | ||
df58fc94 RS |
9166 | case M_BC1FL: |
9167 | case M_BC1TL: | |
9168 | case M_BC2FL: | |
9169 | case M_BC2TL: | |
9170 | gas_assert (mips_opts.micromips); | |
9171 | macro_build_branch_ccl (mask, &offset_expr, | |
9172 | EXTRACT_OPERAND (1, BCC, *ip)); | |
9173 | break; | |
9174 | ||
252b5132 | 9175 | case M_BEQ_I: |
252b5132 | 9176 | case M_BEQL_I: |
252b5132 | 9177 | case M_BNE_I: |
252b5132 | 9178 | case M_BNEL_I: |
b0e6f033 | 9179 | if (imm_expr.X_add_number == 0) |
c0ebe874 | 9180 | op[1] = 0; |
df58fc94 | 9181 | else |
252b5132 | 9182 | { |
c0ebe874 | 9183 | op[1] = AT; |
df58fc94 | 9184 | used_at = 1; |
c0ebe874 | 9185 | load_register (op[1], &imm_expr, HAVE_64BIT_GPRS); |
252b5132 | 9186 | } |
df58fc94 RS |
9187 | /* Fall through. */ |
9188 | case M_BEQL: | |
9189 | case M_BNEL: | |
c0ebe874 | 9190 | macro_build_branch_rsrt (mask, &offset_expr, op[0], op[1]); |
252b5132 RH |
9191 | break; |
9192 | ||
9193 | case M_BGEL: | |
9194 | likely = 1; | |
9195 | case M_BGE: | |
c0ebe874 RS |
9196 | if (op[1] == 0) |
9197 | macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[0]); | |
9198 | else if (op[0] == 0) | |
9199 | macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[1]); | |
df58fc94 | 9200 | else |
252b5132 | 9201 | { |
df58fc94 | 9202 | used_at = 1; |
c0ebe874 | 9203 | macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]); |
df58fc94 RS |
9204 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9205 | &offset_expr, AT, ZERO); | |
252b5132 | 9206 | } |
df58fc94 RS |
9207 | break; |
9208 | ||
9209 | case M_BGEZL: | |
9210 | case M_BGEZALL: | |
9211 | case M_BGTZL: | |
9212 | case M_BLEZL: | |
9213 | case M_BLTZL: | |
9214 | case M_BLTZALL: | |
c0ebe874 | 9215 | macro_build_branch_rs (mask, &offset_expr, op[0]); |
252b5132 RH |
9216 | break; |
9217 | ||
9218 | case M_BGTL_I: | |
9219 | likely = 1; | |
9220 | case M_BGT_I: | |
90ecf173 | 9221 | /* Check for > max integer. */ |
b0e6f033 | 9222 | if (imm_expr.X_add_number >= GPR_SMAX) |
252b5132 RH |
9223 | { |
9224 | do_false: | |
90ecf173 | 9225 | /* Result is always false. */ |
252b5132 | 9226 | if (! likely) |
a605d2b3 | 9227 | macro_build (NULL, "nop", ""); |
252b5132 | 9228 | else |
df58fc94 | 9229 | macro_build_branch_rsrt (M_BNEL, &offset_expr, ZERO, ZERO); |
8fc2e39e | 9230 | break; |
252b5132 | 9231 | } |
f9419b05 | 9232 | ++imm_expr.X_add_number; |
252b5132 RH |
9233 | /* FALLTHROUGH */ |
9234 | case M_BGE_I: | |
9235 | case M_BGEL_I: | |
9236 | if (mask == M_BGEL_I) | |
9237 | likely = 1; | |
b0e6f033 | 9238 | if (imm_expr.X_add_number == 0) |
252b5132 | 9239 | { |
df58fc94 | 9240 | macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, |
c0ebe874 | 9241 | &offset_expr, op[0]); |
8fc2e39e | 9242 | break; |
252b5132 | 9243 | } |
b0e6f033 | 9244 | if (imm_expr.X_add_number == 1) |
252b5132 | 9245 | { |
df58fc94 | 9246 | macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, |
c0ebe874 | 9247 | &offset_expr, op[0]); |
8fc2e39e | 9248 | break; |
252b5132 | 9249 | } |
b0e6f033 | 9250 | if (imm_expr.X_add_number <= GPR_SMIN) |
252b5132 RH |
9251 | { |
9252 | do_true: | |
9253 | /* result is always true */ | |
1661c76c | 9254 | as_warn (_("branch %s is always true"), ip->insn_mo->name); |
67c0d1eb | 9255 | macro_build (&offset_expr, "b", "p"); |
8fc2e39e | 9256 | break; |
252b5132 | 9257 | } |
8fc2e39e | 9258 | used_at = 1; |
c0ebe874 | 9259 | set_at (op[0], 0); |
df58fc94 RS |
9260 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9261 | &offset_expr, AT, ZERO); | |
252b5132 RH |
9262 | break; |
9263 | ||
9264 | case M_BGEUL: | |
9265 | likely = 1; | |
9266 | case M_BGEU: | |
c0ebe874 | 9267 | if (op[1] == 0) |
252b5132 | 9268 | goto do_true; |
c0ebe874 | 9269 | else if (op[0] == 0) |
df58fc94 | 9270 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
c0ebe874 | 9271 | &offset_expr, ZERO, op[1]); |
df58fc94 | 9272 | else |
252b5132 | 9273 | { |
df58fc94 | 9274 | used_at = 1; |
c0ebe874 | 9275 | macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]); |
df58fc94 RS |
9276 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9277 | &offset_expr, AT, ZERO); | |
252b5132 | 9278 | } |
252b5132 RH |
9279 | break; |
9280 | ||
9281 | case M_BGTUL_I: | |
9282 | likely = 1; | |
9283 | case M_BGTU_I: | |
c0ebe874 | 9284 | if (op[0] == 0 |
ca4e0257 | 9285 | || (HAVE_32BIT_GPRS |
f01dc953 | 9286 | && imm_expr.X_add_number == -1)) |
252b5132 | 9287 | goto do_false; |
f9419b05 | 9288 | ++imm_expr.X_add_number; |
252b5132 RH |
9289 | /* FALLTHROUGH */ |
9290 | case M_BGEU_I: | |
9291 | case M_BGEUL_I: | |
9292 | if (mask == M_BGEUL_I) | |
9293 | likely = 1; | |
b0e6f033 | 9294 | if (imm_expr.X_add_number == 0) |
252b5132 | 9295 | goto do_true; |
b0e6f033 | 9296 | else if (imm_expr.X_add_number == 1) |
df58fc94 | 9297 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
c0ebe874 | 9298 | &offset_expr, op[0], ZERO); |
df58fc94 | 9299 | else |
252b5132 | 9300 | { |
df58fc94 | 9301 | used_at = 1; |
c0ebe874 | 9302 | set_at (op[0], 1); |
df58fc94 RS |
9303 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9304 | &offset_expr, AT, ZERO); | |
252b5132 | 9305 | } |
252b5132 RH |
9306 | break; |
9307 | ||
9308 | case M_BGTL: | |
9309 | likely = 1; | |
9310 | case M_BGT: | |
c0ebe874 RS |
9311 | if (op[1] == 0) |
9312 | macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[0]); | |
9313 | else if (op[0] == 0) | |
9314 | macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[1]); | |
df58fc94 | 9315 | else |
252b5132 | 9316 | { |
df58fc94 | 9317 | used_at = 1; |
c0ebe874 | 9318 | macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]); |
df58fc94 RS |
9319 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9320 | &offset_expr, AT, ZERO); | |
252b5132 | 9321 | } |
252b5132 RH |
9322 | break; |
9323 | ||
9324 | case M_BGTUL: | |
9325 | likely = 1; | |
9326 | case M_BGTU: | |
c0ebe874 | 9327 | if (op[1] == 0) |
df58fc94 | 9328 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
c0ebe874 RS |
9329 | &offset_expr, op[0], ZERO); |
9330 | else if (op[0] == 0) | |
df58fc94 RS |
9331 | goto do_false; |
9332 | else | |
252b5132 | 9333 | { |
df58fc94 | 9334 | used_at = 1; |
c0ebe874 | 9335 | macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]); |
df58fc94 RS |
9336 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9337 | &offset_expr, AT, ZERO); | |
252b5132 | 9338 | } |
252b5132 RH |
9339 | break; |
9340 | ||
9341 | case M_BLEL: | |
9342 | likely = 1; | |
9343 | case M_BLE: | |
c0ebe874 RS |
9344 | if (op[1] == 0) |
9345 | macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]); | |
9346 | else if (op[0] == 0) | |
9347 | macro_build_branch_rs (likely ? M_BGEZL : M_BGEZ, &offset_expr, op[1]); | |
df58fc94 | 9348 | else |
252b5132 | 9349 | { |
df58fc94 | 9350 | used_at = 1; |
c0ebe874 | 9351 | macro_build (NULL, "slt", "d,v,t", AT, op[1], op[0]); |
df58fc94 RS |
9352 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9353 | &offset_expr, AT, ZERO); | |
252b5132 | 9354 | } |
252b5132 RH |
9355 | break; |
9356 | ||
9357 | case M_BLEL_I: | |
9358 | likely = 1; | |
9359 | case M_BLE_I: | |
b0e6f033 | 9360 | if (imm_expr.X_add_number >= GPR_SMAX) |
252b5132 | 9361 | goto do_true; |
f9419b05 | 9362 | ++imm_expr.X_add_number; |
252b5132 RH |
9363 | /* FALLTHROUGH */ |
9364 | case M_BLT_I: | |
9365 | case M_BLTL_I: | |
9366 | if (mask == M_BLTL_I) | |
9367 | likely = 1; | |
b0e6f033 | 9368 | if (imm_expr.X_add_number == 0) |
c0ebe874 | 9369 | macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]); |
b0e6f033 | 9370 | else if (imm_expr.X_add_number == 1) |
c0ebe874 | 9371 | macro_build_branch_rs (likely ? M_BLEZL : M_BLEZ, &offset_expr, op[0]); |
df58fc94 | 9372 | else |
252b5132 | 9373 | { |
df58fc94 | 9374 | used_at = 1; |
c0ebe874 | 9375 | set_at (op[0], 0); |
df58fc94 RS |
9376 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9377 | &offset_expr, AT, ZERO); | |
252b5132 | 9378 | } |
252b5132 RH |
9379 | break; |
9380 | ||
9381 | case M_BLEUL: | |
9382 | likely = 1; | |
9383 | case M_BLEU: | |
c0ebe874 | 9384 | if (op[1] == 0) |
df58fc94 | 9385 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
c0ebe874 RS |
9386 | &offset_expr, op[0], ZERO); |
9387 | else if (op[0] == 0) | |
df58fc94 RS |
9388 | goto do_true; |
9389 | else | |
252b5132 | 9390 | { |
df58fc94 | 9391 | used_at = 1; |
c0ebe874 | 9392 | macro_build (NULL, "sltu", "d,v,t", AT, op[1], op[0]); |
df58fc94 RS |
9393 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
9394 | &offset_expr, AT, ZERO); | |
252b5132 | 9395 | } |
252b5132 RH |
9396 | break; |
9397 | ||
9398 | case M_BLEUL_I: | |
9399 | likely = 1; | |
9400 | case M_BLEU_I: | |
c0ebe874 | 9401 | if (op[0] == 0 |
ca4e0257 | 9402 | || (HAVE_32BIT_GPRS |
f01dc953 | 9403 | && imm_expr.X_add_number == -1)) |
252b5132 | 9404 | goto do_true; |
f9419b05 | 9405 | ++imm_expr.X_add_number; |
252b5132 RH |
9406 | /* FALLTHROUGH */ |
9407 | case M_BLTU_I: | |
9408 | case M_BLTUL_I: | |
9409 | if (mask == M_BLTUL_I) | |
9410 | likely = 1; | |
b0e6f033 | 9411 | if (imm_expr.X_add_number == 0) |
252b5132 | 9412 | goto do_false; |
b0e6f033 | 9413 | else if (imm_expr.X_add_number == 1) |
df58fc94 | 9414 | macro_build_branch_rsrt (likely ? M_BEQL : M_BEQ, |
c0ebe874 | 9415 | &offset_expr, op[0], ZERO); |
df58fc94 | 9416 | else |
252b5132 | 9417 | { |
df58fc94 | 9418 | used_at = 1; |
c0ebe874 | 9419 | set_at (op[0], 1); |
df58fc94 RS |
9420 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9421 | &offset_expr, AT, ZERO); | |
252b5132 | 9422 | } |
252b5132 RH |
9423 | break; |
9424 | ||
9425 | case M_BLTL: | |
9426 | likely = 1; | |
9427 | case M_BLT: | |
c0ebe874 RS |
9428 | if (op[1] == 0) |
9429 | macro_build_branch_rs (likely ? M_BLTZL : M_BLTZ, &offset_expr, op[0]); | |
9430 | else if (op[0] == 0) | |
9431 | macro_build_branch_rs (likely ? M_BGTZL : M_BGTZ, &offset_expr, op[1]); | |
df58fc94 | 9432 | else |
252b5132 | 9433 | { |
df58fc94 | 9434 | used_at = 1; |
c0ebe874 | 9435 | macro_build (NULL, "slt", "d,v,t", AT, op[0], op[1]); |
df58fc94 RS |
9436 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9437 | &offset_expr, AT, ZERO); | |
252b5132 | 9438 | } |
252b5132 RH |
9439 | break; |
9440 | ||
9441 | case M_BLTUL: | |
9442 | likely = 1; | |
9443 | case M_BLTU: | |
c0ebe874 | 9444 | if (op[1] == 0) |
252b5132 | 9445 | goto do_false; |
c0ebe874 | 9446 | else if (op[0] == 0) |
df58fc94 | 9447 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
c0ebe874 | 9448 | &offset_expr, ZERO, op[1]); |
df58fc94 | 9449 | else |
252b5132 | 9450 | { |
df58fc94 | 9451 | used_at = 1; |
c0ebe874 | 9452 | macro_build (NULL, "sltu", "d,v,t", AT, op[0], op[1]); |
df58fc94 RS |
9453 | macro_build_branch_rsrt (likely ? M_BNEL : M_BNE, |
9454 | &offset_expr, AT, ZERO); | |
252b5132 | 9455 | } |
252b5132 RH |
9456 | break; |
9457 | ||
9458 | case M_DDIV_3: | |
9459 | dbl = 1; | |
9460 | case M_DIV_3: | |
9461 | s = "mflo"; | |
9462 | goto do_div3; | |
9463 | case M_DREM_3: | |
9464 | dbl = 1; | |
9465 | case M_REM_3: | |
9466 | s = "mfhi"; | |
9467 | do_div3: | |
c0ebe874 | 9468 | if (op[2] == 0) |
252b5132 | 9469 | { |
1661c76c | 9470 | as_warn (_("divide by zero")); |
252b5132 | 9471 | if (mips_trap) |
df58fc94 | 9472 | macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7); |
252b5132 | 9473 | else |
df58fc94 | 9474 | macro_build (NULL, "break", BRK_FMT, 7); |
8fc2e39e | 9475 | break; |
252b5132 RH |
9476 | } |
9477 | ||
7d10b47d | 9478 | start_noreorder (); |
252b5132 RH |
9479 | if (mips_trap) |
9480 | { | |
c0ebe874 RS |
9481 | macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7); |
9482 | macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]); | |
252b5132 RH |
9483 | } |
9484 | else | |
9485 | { | |
df58fc94 RS |
9486 | if (mips_opts.micromips) |
9487 | micromips_label_expr (&label_expr); | |
9488 | else | |
9489 | label_expr.X_add_number = 8; | |
c0ebe874 RS |
9490 | macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO); |
9491 | macro_build (NULL, dbl ? "ddiv" : "div", "z,s,t", op[1], op[2]); | |
df58fc94 RS |
9492 | macro_build (NULL, "break", BRK_FMT, 7); |
9493 | if (mips_opts.micromips) | |
9494 | micromips_add_label (); | |
252b5132 RH |
9495 | } |
9496 | expr1.X_add_number = -1; | |
8fc2e39e | 9497 | used_at = 1; |
f6a22291 | 9498 | load_register (AT, &expr1, dbl); |
df58fc94 RS |
9499 | if (mips_opts.micromips) |
9500 | micromips_label_expr (&label_expr); | |
9501 | else | |
9502 | label_expr.X_add_number = mips_trap ? (dbl ? 12 : 8) : (dbl ? 20 : 16); | |
c0ebe874 | 9503 | macro_build (&label_expr, "bne", "s,t,p", op[2], AT); |
252b5132 RH |
9504 | if (dbl) |
9505 | { | |
9506 | expr1.X_add_number = 1; | |
f6a22291 | 9507 | load_register (AT, &expr1, dbl); |
df58fc94 | 9508 | macro_build (NULL, "dsll32", SHFT_FMT, AT, AT, 31); |
252b5132 RH |
9509 | } |
9510 | else | |
9511 | { | |
9512 | expr1.X_add_number = 0x80000000; | |
df58fc94 | 9513 | macro_build (&expr1, "lui", LUI_FMT, AT, BFD_RELOC_HI16); |
252b5132 RH |
9514 | } |
9515 | if (mips_trap) | |
9516 | { | |
c0ebe874 | 9517 | macro_build (NULL, "teq", TRAP_FMT, op[1], AT, 6); |
252b5132 RH |
9518 | /* We want to close the noreorder block as soon as possible, so |
9519 | that later insns are available for delay slot filling. */ | |
7d10b47d | 9520 | end_noreorder (); |
252b5132 RH |
9521 | } |
9522 | else | |
9523 | { | |
df58fc94 RS |
9524 | if (mips_opts.micromips) |
9525 | micromips_label_expr (&label_expr); | |
9526 | else | |
9527 | label_expr.X_add_number = 8; | |
c0ebe874 | 9528 | macro_build (&label_expr, "bne", "s,t,p", op[1], AT); |
a605d2b3 | 9529 | macro_build (NULL, "nop", ""); |
252b5132 RH |
9530 | |
9531 | /* We want to close the noreorder block as soon as possible, so | |
9532 | that later insns are available for delay slot filling. */ | |
7d10b47d | 9533 | end_noreorder (); |
252b5132 | 9534 | |
df58fc94 | 9535 | macro_build (NULL, "break", BRK_FMT, 6); |
252b5132 | 9536 | } |
df58fc94 RS |
9537 | if (mips_opts.micromips) |
9538 | micromips_add_label (); | |
c0ebe874 | 9539 | macro_build (NULL, s, MFHL_FMT, op[0]); |
252b5132 RH |
9540 | break; |
9541 | ||
9542 | case M_DIV_3I: | |
9543 | s = "div"; | |
9544 | s2 = "mflo"; | |
9545 | goto do_divi; | |
9546 | case M_DIVU_3I: | |
9547 | s = "divu"; | |
9548 | s2 = "mflo"; | |
9549 | goto do_divi; | |
9550 | case M_REM_3I: | |
9551 | s = "div"; | |
9552 | s2 = "mfhi"; | |
9553 | goto do_divi; | |
9554 | case M_REMU_3I: | |
9555 | s = "divu"; | |
9556 | s2 = "mfhi"; | |
9557 | goto do_divi; | |
9558 | case M_DDIV_3I: | |
9559 | dbl = 1; | |
9560 | s = "ddiv"; | |
9561 | s2 = "mflo"; | |
9562 | goto do_divi; | |
9563 | case M_DDIVU_3I: | |
9564 | dbl = 1; | |
9565 | s = "ddivu"; | |
9566 | s2 = "mflo"; | |
9567 | goto do_divi; | |
9568 | case M_DREM_3I: | |
9569 | dbl = 1; | |
9570 | s = "ddiv"; | |
9571 | s2 = "mfhi"; | |
9572 | goto do_divi; | |
9573 | case M_DREMU_3I: | |
9574 | dbl = 1; | |
9575 | s = "ddivu"; | |
9576 | s2 = "mfhi"; | |
9577 | do_divi: | |
b0e6f033 | 9578 | if (imm_expr.X_add_number == 0) |
252b5132 | 9579 | { |
1661c76c | 9580 | as_warn (_("divide by zero")); |
252b5132 | 9581 | if (mips_trap) |
df58fc94 | 9582 | macro_build (NULL, "teq", TRAP_FMT, ZERO, ZERO, 7); |
252b5132 | 9583 | else |
df58fc94 | 9584 | macro_build (NULL, "break", BRK_FMT, 7); |
8fc2e39e | 9585 | break; |
252b5132 | 9586 | } |
b0e6f033 | 9587 | if (imm_expr.X_add_number == 1) |
252b5132 RH |
9588 | { |
9589 | if (strcmp (s2, "mflo") == 0) | |
c0ebe874 | 9590 | move_register (op[0], op[1]); |
252b5132 | 9591 | else |
c0ebe874 | 9592 | move_register (op[0], ZERO); |
8fc2e39e | 9593 | break; |
252b5132 | 9594 | } |
b0e6f033 | 9595 | if (imm_expr.X_add_number == -1 && s[strlen (s) - 1] != 'u') |
252b5132 RH |
9596 | { |
9597 | if (strcmp (s2, "mflo") == 0) | |
c0ebe874 | 9598 | macro_build (NULL, dbl ? "dneg" : "neg", "d,w", op[0], op[1]); |
252b5132 | 9599 | else |
c0ebe874 | 9600 | move_register (op[0], ZERO); |
8fc2e39e | 9601 | break; |
252b5132 RH |
9602 | } |
9603 | ||
8fc2e39e | 9604 | used_at = 1; |
67c0d1eb | 9605 | load_register (AT, &imm_expr, dbl); |
c0ebe874 RS |
9606 | macro_build (NULL, s, "z,s,t", op[1], AT); |
9607 | macro_build (NULL, s2, MFHL_FMT, op[0]); | |
252b5132 RH |
9608 | break; |
9609 | ||
9610 | case M_DIVU_3: | |
9611 | s = "divu"; | |
9612 | s2 = "mflo"; | |
9613 | goto do_divu3; | |
9614 | case M_REMU_3: | |
9615 | s = "divu"; | |
9616 | s2 = "mfhi"; | |
9617 | goto do_divu3; | |
9618 | case M_DDIVU_3: | |
9619 | s = "ddivu"; | |
9620 | s2 = "mflo"; | |
9621 | goto do_divu3; | |
9622 | case M_DREMU_3: | |
9623 | s = "ddivu"; | |
9624 | s2 = "mfhi"; | |
9625 | do_divu3: | |
7d10b47d | 9626 | start_noreorder (); |
252b5132 RH |
9627 | if (mips_trap) |
9628 | { | |
c0ebe874 RS |
9629 | macro_build (NULL, "teq", TRAP_FMT, op[2], ZERO, 7); |
9630 | macro_build (NULL, s, "z,s,t", op[1], op[2]); | |
252b5132 RH |
9631 | /* We want to close the noreorder block as soon as possible, so |
9632 | that later insns are available for delay slot filling. */ | |
7d10b47d | 9633 | end_noreorder (); |
252b5132 RH |
9634 | } |
9635 | else | |
9636 | { | |
df58fc94 RS |
9637 | if (mips_opts.micromips) |
9638 | micromips_label_expr (&label_expr); | |
9639 | else | |
9640 | label_expr.X_add_number = 8; | |
c0ebe874 RS |
9641 | macro_build (&label_expr, "bne", "s,t,p", op[2], ZERO); |
9642 | macro_build (NULL, s, "z,s,t", op[1], op[2]); | |
252b5132 RH |
9643 | |
9644 | /* We want to close the noreorder block as soon as possible, so | |
9645 | that later insns are available for delay slot filling. */ | |
7d10b47d | 9646 | end_noreorder (); |
df58fc94 RS |
9647 | macro_build (NULL, "break", BRK_FMT, 7); |
9648 | if (mips_opts.micromips) | |
9649 | micromips_add_label (); | |
252b5132 | 9650 | } |
c0ebe874 | 9651 | macro_build (NULL, s2, MFHL_FMT, op[0]); |
8fc2e39e | 9652 | break; |
252b5132 | 9653 | |
1abe91b1 MR |
9654 | case M_DLCA_AB: |
9655 | dbl = 1; | |
9656 | case M_LCA_AB: | |
9657 | call = 1; | |
9658 | goto do_la; | |
252b5132 RH |
9659 | case M_DLA_AB: |
9660 | dbl = 1; | |
9661 | case M_LA_AB: | |
1abe91b1 | 9662 | do_la: |
252b5132 RH |
9663 | /* Load the address of a symbol into a register. If breg is not |
9664 | zero, we then add a base register to it. */ | |
9665 | ||
c0ebe874 | 9666 | breg = op[2]; |
3bec30a8 TS |
9667 | if (dbl && HAVE_32BIT_GPRS) |
9668 | as_warn (_("dla used to load 32-bit register")); | |
9669 | ||
90ecf173 | 9670 | if (!dbl && HAVE_64BIT_OBJECTS) |
3bec30a8 TS |
9671 | as_warn (_("la used to load 64-bit address")); |
9672 | ||
f2ae14a1 | 9673 | if (small_offset_p (0, align, 16)) |
0c11417f | 9674 | { |
c0ebe874 | 9675 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", op[0], breg, |
f2ae14a1 | 9676 | -1, offset_reloc[0], offset_reloc[1], offset_reloc[2]); |
8fc2e39e | 9677 | break; |
0c11417f MR |
9678 | } |
9679 | ||
c0ebe874 | 9680 | if (mips_opts.at && (op[0] == breg)) |
afdbd6d0 CD |
9681 | { |
9682 | tempreg = AT; | |
9683 | used_at = 1; | |
9684 | } | |
9685 | else | |
c0ebe874 | 9686 | tempreg = op[0]; |
afdbd6d0 | 9687 | |
252b5132 RH |
9688 | if (offset_expr.X_op != O_symbol |
9689 | && offset_expr.X_op != O_constant) | |
9690 | { | |
1661c76c | 9691 | as_bad (_("expression too complex")); |
252b5132 RH |
9692 | offset_expr.X_op = O_constant; |
9693 | } | |
9694 | ||
252b5132 | 9695 | if (offset_expr.X_op == O_constant) |
aed1a261 | 9696 | load_register (tempreg, &offset_expr, HAVE_64BIT_ADDRESSES); |
252b5132 RH |
9697 | else if (mips_pic == NO_PIC) |
9698 | { | |
d6bc6245 | 9699 | /* If this is a reference to a GP relative symbol, we want |
cdf6fd85 | 9700 | addiu $tempreg,$gp,<sym> (BFD_RELOC_GPREL16) |
252b5132 RH |
9701 | Otherwise we want |
9702 | lui $tempreg,<sym> (BFD_RELOC_HI16_S) | |
9703 | addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16) | |
9704 | If we have a constant, we need two instructions anyhow, | |
d6bc6245 | 9705 | so we may as well always use the latter form. |
76b3015f | 9706 | |
6caf9ef4 TS |
9707 | With 64bit address space and a usable $at we want |
9708 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
9709 | lui $at,<sym> (BFD_RELOC_HI16_S) | |
9710 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
9711 | daddiu $at,<sym> (BFD_RELOC_LO16) | |
9712 | dsll32 $tempreg,0 | |
9713 | daddu $tempreg,$tempreg,$at | |
9714 | ||
9715 | If $at is already in use, we use a path which is suboptimal | |
9716 | on superscalar processors. | |
9717 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
9718 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
9719 | dsll $tempreg,16 | |
9720 | daddiu $tempreg,<sym> (BFD_RELOC_HI16_S) | |
9721 | dsll $tempreg,16 | |
9722 | daddiu $tempreg,<sym> (BFD_RELOC_LO16) | |
9723 | ||
9724 | For GP relative symbols in 64bit address space we can use | |
9725 | the same sequence as in 32bit address space. */ | |
aed1a261 | 9726 | if (HAVE_64BIT_SYMBOLS) |
252b5132 | 9727 | { |
6caf9ef4 TS |
9728 | if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET |
9729 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) | |
9730 | { | |
9731 | relax_start (offset_expr.X_add_symbol); | |
9732 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", | |
9733 | tempreg, mips_gp_register, BFD_RELOC_GPREL16); | |
9734 | relax_switch (); | |
9735 | } | |
d6bc6245 | 9736 | |
741fe287 | 9737 | if (used_at == 0 && mips_opts.at) |
98d3f06f | 9738 | { |
df58fc94 | 9739 | macro_build (&offset_expr, "lui", LUI_FMT, |
17a2f251 | 9740 | tempreg, BFD_RELOC_MIPS_HIGHEST); |
df58fc94 | 9741 | macro_build (&offset_expr, "lui", LUI_FMT, |
17a2f251 | 9742 | AT, BFD_RELOC_HI16_S); |
67c0d1eb | 9743 | macro_build (&offset_expr, "daddiu", "t,r,j", |
17a2f251 | 9744 | tempreg, tempreg, BFD_RELOC_MIPS_HIGHER); |
67c0d1eb | 9745 | macro_build (&offset_expr, "daddiu", "t,r,j", |
17a2f251 | 9746 | AT, AT, BFD_RELOC_LO16); |
df58fc94 | 9747 | macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0); |
67c0d1eb | 9748 | macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT); |
98d3f06f KH |
9749 | used_at = 1; |
9750 | } | |
9751 | else | |
9752 | { | |
df58fc94 | 9753 | macro_build (&offset_expr, "lui", LUI_FMT, |
17a2f251 | 9754 | tempreg, BFD_RELOC_MIPS_HIGHEST); |
67c0d1eb | 9755 | macro_build (&offset_expr, "daddiu", "t,r,j", |
17a2f251 | 9756 | tempreg, tempreg, BFD_RELOC_MIPS_HIGHER); |
df58fc94 | 9757 | macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16); |
67c0d1eb | 9758 | macro_build (&offset_expr, "daddiu", "t,r,j", |
17a2f251 | 9759 | tempreg, tempreg, BFD_RELOC_HI16_S); |
df58fc94 | 9760 | macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16); |
67c0d1eb | 9761 | macro_build (&offset_expr, "daddiu", "t,r,j", |
17a2f251 | 9762 | tempreg, tempreg, BFD_RELOC_LO16); |
98d3f06f | 9763 | } |
6caf9ef4 TS |
9764 | |
9765 | if (mips_relax.sequence) | |
9766 | relax_end (); | |
98d3f06f KH |
9767 | } |
9768 | else | |
9769 | { | |
9770 | if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET | |
6caf9ef4 | 9771 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) |
98d3f06f | 9772 | { |
4d7206a2 | 9773 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb RS |
9774 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", |
9775 | tempreg, mips_gp_register, BFD_RELOC_GPREL16); | |
4d7206a2 | 9776 | relax_switch (); |
98d3f06f | 9777 | } |
6943caf0 | 9778 | if (!IS_SEXT_32BIT_NUM (offset_expr.X_add_number)) |
1661c76c | 9779 | as_bad (_("offset too large")); |
67c0d1eb RS |
9780 | macro_build_lui (&offset_expr, tempreg); |
9781 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", | |
9782 | tempreg, tempreg, BFD_RELOC_LO16); | |
4d7206a2 RS |
9783 | if (mips_relax.sequence) |
9784 | relax_end (); | |
98d3f06f | 9785 | } |
252b5132 | 9786 | } |
0a44bf69 | 9787 | else if (!mips_big_got && !HAVE_NEWABI) |
252b5132 | 9788 | { |
9117d219 NC |
9789 | int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16; |
9790 | ||
252b5132 RH |
9791 | /* If this is a reference to an external symbol, and there |
9792 | is no constant, we want | |
9793 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
1abe91b1 | 9794 | or for lca or if tempreg is PIC_CALL_REG |
9117d219 | 9795 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16) |
252b5132 RH |
9796 | For a local symbol, we want |
9797 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
9798 | nop | |
9799 | addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16) | |
9800 | ||
9801 | If we have a small constant, and this is a reference to | |
9802 | an external symbol, we want | |
9803 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
9804 | nop | |
9805 | addiu $tempreg,$tempreg,<constant> | |
9806 | For a local symbol, we want the same instruction | |
9807 | sequence, but we output a BFD_RELOC_LO16 reloc on the | |
9808 | addiu instruction. | |
9809 | ||
9810 | If we have a large constant, and this is a reference to | |
9811 | an external symbol, we want | |
9812 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
9813 | lui $at,<hiconstant> | |
9814 | addiu $at,$at,<loconstant> | |
9815 | addu $tempreg,$tempreg,$at | |
9816 | For a local symbol, we want the same instruction | |
9817 | sequence, but we output a BFD_RELOC_LO16 reloc on the | |
ed6fb7bd | 9818 | addiu instruction. |
ed6fb7bd SC |
9819 | */ |
9820 | ||
4d7206a2 | 9821 | if (offset_expr.X_add_number == 0) |
252b5132 | 9822 | { |
0a44bf69 RS |
9823 | if (mips_pic == SVR4_PIC |
9824 | && breg == 0 | |
9825 | && (call || tempreg == PIC_CALL_REG)) | |
4d7206a2 RS |
9826 | lw_reloc_type = (int) BFD_RELOC_MIPS_CALL16; |
9827 | ||
9828 | relax_start (offset_expr.X_add_symbol); | |
67c0d1eb RS |
9829 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9830 | lw_reloc_type, mips_gp_register); | |
4d7206a2 | 9831 | if (breg != 0) |
252b5132 RH |
9832 | { |
9833 | /* We're going to put in an addu instruction using | |
9834 | tempreg, so we may as well insert the nop right | |
9835 | now. */ | |
269137b2 | 9836 | load_delay_nop (); |
252b5132 | 9837 | } |
4d7206a2 | 9838 | relax_switch (); |
67c0d1eb RS |
9839 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
9840 | tempreg, BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
269137b2 | 9841 | load_delay_nop (); |
67c0d1eb RS |
9842 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", |
9843 | tempreg, tempreg, BFD_RELOC_LO16); | |
4d7206a2 | 9844 | relax_end (); |
252b5132 RH |
9845 | /* FIXME: If breg == 0, and the next instruction uses |
9846 | $tempreg, then if this variant case is used an extra | |
9847 | nop will be generated. */ | |
9848 | } | |
4d7206a2 RS |
9849 | else if (offset_expr.X_add_number >= -0x8000 |
9850 | && offset_expr.X_add_number < 0x8000) | |
252b5132 | 9851 | { |
67c0d1eb | 9852 | load_got_offset (tempreg, &offset_expr); |
269137b2 | 9853 | load_delay_nop (); |
67c0d1eb | 9854 | add_got_offset (tempreg, &offset_expr); |
252b5132 RH |
9855 | } |
9856 | else | |
9857 | { | |
4d7206a2 RS |
9858 | expr1.X_add_number = offset_expr.X_add_number; |
9859 | offset_expr.X_add_number = | |
43c0598f | 9860 | SEXT_16BIT (offset_expr.X_add_number); |
67c0d1eb | 9861 | load_got_offset (tempreg, &offset_expr); |
f6a22291 | 9862 | offset_expr.X_add_number = expr1.X_add_number; |
252b5132 RH |
9863 | /* If we are going to add in a base register, and the |
9864 | target register and the base register are the same, | |
9865 | then we are using AT as a temporary register. Since | |
9866 | we want to load the constant into AT, we add our | |
9867 | current AT (from the global offset table) and the | |
9868 | register into the register now, and pretend we were | |
9869 | not using a base register. */ | |
c0ebe874 | 9870 | if (breg == op[0]) |
252b5132 | 9871 | { |
269137b2 | 9872 | load_delay_nop (); |
67c0d1eb | 9873 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 | 9874 | op[0], AT, breg); |
252b5132 | 9875 | breg = 0; |
c0ebe874 | 9876 | tempreg = op[0]; |
252b5132 | 9877 | } |
f6a22291 | 9878 | add_got_offset_hilo (tempreg, &offset_expr, AT); |
252b5132 RH |
9879 | used_at = 1; |
9880 | } | |
9881 | } | |
0a44bf69 | 9882 | else if (!mips_big_got && HAVE_NEWABI) |
f5040a92 | 9883 | { |
67c0d1eb | 9884 | int add_breg_early = 0; |
f5040a92 AO |
9885 | |
9886 | /* If this is a reference to an external, and there is no | |
9887 | constant, or local symbol (*), with or without a | |
9888 | constant, we want | |
9889 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP) | |
1abe91b1 | 9890 | or for lca or if tempreg is PIC_CALL_REG |
f5040a92 AO |
9891 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_CALL16) |
9892 | ||
9893 | If we have a small constant, and this is a reference to | |
9894 | an external symbol, we want | |
9895 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP) | |
9896 | addiu $tempreg,$tempreg,<constant> | |
9897 | ||
9898 | If we have a large constant, and this is a reference to | |
9899 | an external symbol, we want | |
9900 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_DISP) | |
9901 | lui $at,<hiconstant> | |
9902 | addiu $at,$at,<loconstant> | |
9903 | addu $tempreg,$tempreg,$at | |
9904 | ||
9905 | (*) Other assemblers seem to prefer GOT_PAGE/GOT_OFST for | |
9906 | local symbols, even though it introduces an additional | |
9907 | instruction. */ | |
9908 | ||
f5040a92 AO |
9909 | if (offset_expr.X_add_number) |
9910 | { | |
4d7206a2 | 9911 | expr1.X_add_number = offset_expr.X_add_number; |
f5040a92 AO |
9912 | offset_expr.X_add_number = 0; |
9913 | ||
4d7206a2 | 9914 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb RS |
9915 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9916 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); | |
f5040a92 AO |
9917 | |
9918 | if (expr1.X_add_number >= -0x8000 | |
9919 | && expr1.X_add_number < 0x8000) | |
9920 | { | |
67c0d1eb RS |
9921 | macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j", |
9922 | tempreg, tempreg, BFD_RELOC_LO16); | |
f5040a92 | 9923 | } |
ecd13cd3 | 9924 | else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000)) |
f5040a92 | 9925 | { |
c0ebe874 RS |
9926 | unsigned int dreg; |
9927 | ||
f5040a92 AO |
9928 | /* If we are going to add in a base register, and the |
9929 | target register and the base register are the same, | |
9930 | then we are using AT as a temporary register. Since | |
9931 | we want to load the constant into AT, we add our | |
9932 | current AT (from the global offset table) and the | |
9933 | register into the register now, and pretend we were | |
9934 | not using a base register. */ | |
c0ebe874 | 9935 | if (breg != op[0]) |
f5040a92 AO |
9936 | dreg = tempreg; |
9937 | else | |
9938 | { | |
9c2799c2 | 9939 | gas_assert (tempreg == AT); |
67c0d1eb | 9940 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 RS |
9941 | op[0], AT, breg); |
9942 | dreg = op[0]; | |
67c0d1eb | 9943 | add_breg_early = 1; |
f5040a92 AO |
9944 | } |
9945 | ||
f6a22291 | 9946 | load_register (AT, &expr1, HAVE_64BIT_ADDRESSES); |
67c0d1eb | 9947 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 9948 | dreg, dreg, AT); |
f5040a92 | 9949 | |
f5040a92 AO |
9950 | used_at = 1; |
9951 | } | |
9952 | else | |
9953 | as_bad (_("PIC code offset overflow (max 32 signed bits)")); | |
9954 | ||
4d7206a2 | 9955 | relax_switch (); |
f5040a92 AO |
9956 | offset_expr.X_add_number = expr1.X_add_number; |
9957 | ||
67c0d1eb RS |
9958 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9959 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); | |
9960 | if (add_breg_early) | |
f5040a92 | 9961 | { |
67c0d1eb | 9962 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 | 9963 | op[0], tempreg, breg); |
f5040a92 | 9964 | breg = 0; |
c0ebe874 | 9965 | tempreg = op[0]; |
f5040a92 | 9966 | } |
4d7206a2 | 9967 | relax_end (); |
f5040a92 | 9968 | } |
4d7206a2 | 9969 | else if (breg == 0 && (call || tempreg == PIC_CALL_REG)) |
f5040a92 | 9970 | { |
4d7206a2 | 9971 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb RS |
9972 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9973 | BFD_RELOC_MIPS_CALL16, mips_gp_register); | |
4d7206a2 | 9974 | relax_switch (); |
67c0d1eb RS |
9975 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9976 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); | |
4d7206a2 | 9977 | relax_end (); |
f5040a92 | 9978 | } |
4d7206a2 | 9979 | else |
f5040a92 | 9980 | { |
67c0d1eb RS |
9981 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
9982 | BFD_RELOC_MIPS_GOT_DISP, mips_gp_register); | |
f5040a92 AO |
9983 | } |
9984 | } | |
0a44bf69 | 9985 | else if (mips_big_got && !HAVE_NEWABI) |
252b5132 | 9986 | { |
67c0d1eb | 9987 | int gpdelay; |
9117d219 NC |
9988 | int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16; |
9989 | int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16; | |
ed6fb7bd | 9990 | int local_reloc_type = (int) BFD_RELOC_MIPS_GOT16; |
252b5132 RH |
9991 | |
9992 | /* This is the large GOT case. If this is a reference to an | |
9993 | external symbol, and there is no constant, we want | |
9994 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
9995 | addu $tempreg,$tempreg,$gp | |
9996 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
1abe91b1 | 9997 | or for lca or if tempreg is PIC_CALL_REG |
9117d219 NC |
9998 | lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16) |
9999 | addu $tempreg,$tempreg,$gp | |
10000 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16) | |
252b5132 RH |
10001 | For a local symbol, we want |
10002 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
10003 | nop | |
10004 | addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16) | |
10005 | ||
10006 | If we have a small constant, and this is a reference to | |
10007 | an external symbol, we want | |
10008 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
10009 | addu $tempreg,$tempreg,$gp | |
10010 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
10011 | nop | |
10012 | addiu $tempreg,$tempreg,<constant> | |
10013 | For a local symbol, we want | |
10014 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
10015 | nop | |
10016 | addiu $tempreg,$tempreg,<constant> (BFD_RELOC_LO16) | |
10017 | ||
10018 | If we have a large constant, and this is a reference to | |
10019 | an external symbol, we want | |
10020 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
10021 | addu $tempreg,$tempreg,$gp | |
10022 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
10023 | lui $at,<hiconstant> | |
10024 | addiu $at,$at,<loconstant> | |
10025 | addu $tempreg,$tempreg,$at | |
10026 | For a local symbol, we want | |
10027 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
10028 | lui $at,<hiconstant> | |
10029 | addiu $at,$at,<loconstant> (BFD_RELOC_LO16) | |
10030 | addu $tempreg,$tempreg,$at | |
f5040a92 | 10031 | */ |
438c16b8 | 10032 | |
252b5132 RH |
10033 | expr1.X_add_number = offset_expr.X_add_number; |
10034 | offset_expr.X_add_number = 0; | |
4d7206a2 | 10035 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb | 10036 | gpdelay = reg_needs_delay (mips_gp_register); |
1abe91b1 MR |
10037 | if (expr1.X_add_number == 0 && breg == 0 |
10038 | && (call || tempreg == PIC_CALL_REG)) | |
9117d219 NC |
10039 | { |
10040 | lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16; | |
10041 | lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16; | |
10042 | } | |
df58fc94 | 10043 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type); |
67c0d1eb | 10044 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 10045 | tempreg, tempreg, mips_gp_register); |
67c0d1eb | 10046 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
17a2f251 | 10047 | tempreg, lw_reloc_type, tempreg); |
252b5132 RH |
10048 | if (expr1.X_add_number == 0) |
10049 | { | |
67c0d1eb | 10050 | if (breg != 0) |
252b5132 RH |
10051 | { |
10052 | /* We're going to put in an addu instruction using | |
10053 | tempreg, so we may as well insert the nop right | |
10054 | now. */ | |
269137b2 | 10055 | load_delay_nop (); |
252b5132 | 10056 | } |
252b5132 RH |
10057 | } |
10058 | else if (expr1.X_add_number >= -0x8000 | |
10059 | && expr1.X_add_number < 0x8000) | |
10060 | { | |
269137b2 | 10061 | load_delay_nop (); |
67c0d1eb | 10062 | macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j", |
17a2f251 | 10063 | tempreg, tempreg, BFD_RELOC_LO16); |
252b5132 RH |
10064 | } |
10065 | else | |
10066 | { | |
c0ebe874 RS |
10067 | unsigned int dreg; |
10068 | ||
252b5132 RH |
10069 | /* If we are going to add in a base register, and the |
10070 | target register and the base register are the same, | |
10071 | then we are using AT as a temporary register. Since | |
10072 | we want to load the constant into AT, we add our | |
10073 | current AT (from the global offset table) and the | |
10074 | register into the register now, and pretend we were | |
10075 | not using a base register. */ | |
c0ebe874 | 10076 | if (breg != op[0]) |
67c0d1eb | 10077 | dreg = tempreg; |
252b5132 RH |
10078 | else |
10079 | { | |
9c2799c2 | 10080 | gas_assert (tempreg == AT); |
269137b2 | 10081 | load_delay_nop (); |
67c0d1eb | 10082 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 RS |
10083 | op[0], AT, breg); |
10084 | dreg = op[0]; | |
252b5132 RH |
10085 | } |
10086 | ||
f6a22291 | 10087 | load_register (AT, &expr1, HAVE_64BIT_ADDRESSES); |
67c0d1eb | 10088 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT); |
252b5132 | 10089 | |
252b5132 RH |
10090 | used_at = 1; |
10091 | } | |
43c0598f | 10092 | offset_expr.X_add_number = SEXT_16BIT (expr1.X_add_number); |
4d7206a2 | 10093 | relax_switch (); |
252b5132 | 10094 | |
67c0d1eb | 10095 | if (gpdelay) |
252b5132 RH |
10096 | { |
10097 | /* This is needed because this instruction uses $gp, but | |
f5040a92 | 10098 | the first instruction on the main stream does not. */ |
67c0d1eb | 10099 | macro_build (NULL, "nop", ""); |
252b5132 | 10100 | } |
ed6fb7bd | 10101 | |
67c0d1eb RS |
10102 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
10103 | local_reloc_type, mips_gp_register); | |
f5040a92 | 10104 | if (expr1.X_add_number >= -0x8000 |
252b5132 RH |
10105 | && expr1.X_add_number < 0x8000) |
10106 | { | |
269137b2 | 10107 | load_delay_nop (); |
67c0d1eb RS |
10108 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", |
10109 | tempreg, tempreg, BFD_RELOC_LO16); | |
252b5132 | 10110 | /* FIXME: If add_number is 0, and there was no base |
f5040a92 AO |
10111 | register, the external symbol case ended with a load, |
10112 | so if the symbol turns out to not be external, and | |
10113 | the next instruction uses tempreg, an unnecessary nop | |
10114 | will be inserted. */ | |
252b5132 RH |
10115 | } |
10116 | else | |
10117 | { | |
c0ebe874 | 10118 | if (breg == op[0]) |
252b5132 RH |
10119 | { |
10120 | /* We must add in the base register now, as in the | |
f5040a92 | 10121 | external symbol case. */ |
9c2799c2 | 10122 | gas_assert (tempreg == AT); |
269137b2 | 10123 | load_delay_nop (); |
67c0d1eb | 10124 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 RS |
10125 | op[0], AT, breg); |
10126 | tempreg = op[0]; | |
252b5132 | 10127 | /* We set breg to 0 because we have arranged to add |
f5040a92 | 10128 | it in in both cases. */ |
252b5132 RH |
10129 | breg = 0; |
10130 | } | |
10131 | ||
67c0d1eb RS |
10132 | macro_build_lui (&expr1, AT); |
10133 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", | |
17a2f251 | 10134 | AT, AT, BFD_RELOC_LO16); |
67c0d1eb | 10135 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 10136 | tempreg, tempreg, AT); |
8fc2e39e | 10137 | used_at = 1; |
252b5132 | 10138 | } |
4d7206a2 | 10139 | relax_end (); |
252b5132 | 10140 | } |
0a44bf69 | 10141 | else if (mips_big_got && HAVE_NEWABI) |
f5040a92 | 10142 | { |
f5040a92 AO |
10143 | int lui_reloc_type = (int) BFD_RELOC_MIPS_GOT_HI16; |
10144 | int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT_LO16; | |
67c0d1eb | 10145 | int add_breg_early = 0; |
f5040a92 AO |
10146 | |
10147 | /* This is the large GOT case. If this is a reference to an | |
10148 | external symbol, and there is no constant, we want | |
10149 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
10150 | add $tempreg,$tempreg,$gp | |
10151 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
1abe91b1 | 10152 | or for lca or if tempreg is PIC_CALL_REG |
f5040a92 AO |
10153 | lui $tempreg,<sym> (BFD_RELOC_MIPS_CALL_HI16) |
10154 | add $tempreg,$tempreg,$gp | |
10155 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_CALL_LO16) | |
10156 | ||
10157 | If we have a small constant, and this is a reference to | |
10158 | an external symbol, we want | |
10159 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
10160 | add $tempreg,$tempreg,$gp | |
10161 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
10162 | addi $tempreg,$tempreg,<constant> | |
10163 | ||
10164 | If we have a large constant, and this is a reference to | |
10165 | an external symbol, we want | |
10166 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
10167 | addu $tempreg,$tempreg,$gp | |
10168 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
10169 | lui $at,<hiconstant> | |
10170 | addi $at,$at,<loconstant> | |
10171 | add $tempreg,$tempreg,$at | |
10172 | ||
10173 | If we have NewABI, and we know it's a local symbol, we want | |
10174 | lw $reg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE) | |
10175 | addiu $reg,$reg,<sym> (BFD_RELOC_MIPS_GOT_OFST) | |
10176 | otherwise we have to resort to GOT_HI16/GOT_LO16. */ | |
10177 | ||
4d7206a2 | 10178 | relax_start (offset_expr.X_add_symbol); |
f5040a92 | 10179 | |
4d7206a2 | 10180 | expr1.X_add_number = offset_expr.X_add_number; |
f5040a92 AO |
10181 | offset_expr.X_add_number = 0; |
10182 | ||
1abe91b1 MR |
10183 | if (expr1.X_add_number == 0 && breg == 0 |
10184 | && (call || tempreg == PIC_CALL_REG)) | |
f5040a92 AO |
10185 | { |
10186 | lui_reloc_type = (int) BFD_RELOC_MIPS_CALL_HI16; | |
10187 | lw_reloc_type = (int) BFD_RELOC_MIPS_CALL_LO16; | |
10188 | } | |
df58fc94 | 10189 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, lui_reloc_type); |
67c0d1eb | 10190 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 10191 | tempreg, tempreg, mips_gp_register); |
67c0d1eb RS |
10192 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10193 | tempreg, lw_reloc_type, tempreg); | |
f5040a92 AO |
10194 | |
10195 | if (expr1.X_add_number == 0) | |
4d7206a2 | 10196 | ; |
f5040a92 AO |
10197 | else if (expr1.X_add_number >= -0x8000 |
10198 | && expr1.X_add_number < 0x8000) | |
10199 | { | |
67c0d1eb | 10200 | macro_build (&expr1, ADDRESS_ADDI_INSN, "t,r,j", |
17a2f251 | 10201 | tempreg, tempreg, BFD_RELOC_LO16); |
f5040a92 | 10202 | } |
ecd13cd3 | 10203 | else if (IS_SEXT_32BIT_NUM (expr1.X_add_number + 0x8000)) |
f5040a92 | 10204 | { |
c0ebe874 RS |
10205 | unsigned int dreg; |
10206 | ||
f5040a92 AO |
10207 | /* If we are going to add in a base register, and the |
10208 | target register and the base register are the same, | |
10209 | then we are using AT as a temporary register. Since | |
10210 | we want to load the constant into AT, we add our | |
10211 | current AT (from the global offset table) and the | |
10212 | register into the register now, and pretend we were | |
10213 | not using a base register. */ | |
c0ebe874 | 10214 | if (breg != op[0]) |
f5040a92 AO |
10215 | dreg = tempreg; |
10216 | else | |
10217 | { | |
9c2799c2 | 10218 | gas_assert (tempreg == AT); |
67c0d1eb | 10219 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 RS |
10220 | op[0], AT, breg); |
10221 | dreg = op[0]; | |
67c0d1eb | 10222 | add_breg_early = 1; |
f5040a92 AO |
10223 | } |
10224 | ||
f6a22291 | 10225 | load_register (AT, &expr1, HAVE_64BIT_ADDRESSES); |
67c0d1eb | 10226 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", dreg, dreg, AT); |
f5040a92 | 10227 | |
f5040a92 AO |
10228 | used_at = 1; |
10229 | } | |
10230 | else | |
10231 | as_bad (_("PIC code offset overflow (max 32 signed bits)")); | |
10232 | ||
4d7206a2 | 10233 | relax_switch (); |
f5040a92 | 10234 | offset_expr.X_add_number = expr1.X_add_number; |
67c0d1eb RS |
10235 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
10236 | BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register); | |
10237 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg, | |
10238 | tempreg, BFD_RELOC_MIPS_GOT_OFST); | |
10239 | if (add_breg_early) | |
f5040a92 | 10240 | { |
67c0d1eb | 10241 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
c0ebe874 | 10242 | op[0], tempreg, breg); |
f5040a92 | 10243 | breg = 0; |
c0ebe874 | 10244 | tempreg = op[0]; |
f5040a92 | 10245 | } |
4d7206a2 | 10246 | relax_end (); |
f5040a92 | 10247 | } |
252b5132 RH |
10248 | else |
10249 | abort (); | |
10250 | ||
10251 | if (breg != 0) | |
c0ebe874 | 10252 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", op[0], tempreg, breg); |
252b5132 RH |
10253 | break; |
10254 | ||
52b6b6b9 | 10255 | case M_MSGSND: |
df58fc94 | 10256 | gas_assert (!mips_opts.micromips); |
c0ebe874 | 10257 | macro_build (NULL, "c2", "C", (op[0] << 16) | 0x01); |
c7af4273 | 10258 | break; |
52b6b6b9 JM |
10259 | |
10260 | case M_MSGLD: | |
df58fc94 | 10261 | gas_assert (!mips_opts.micromips); |
c8276761 | 10262 | macro_build (NULL, "c2", "C", 0x02); |
c7af4273 | 10263 | break; |
52b6b6b9 JM |
10264 | |
10265 | case M_MSGLD_T: | |
df58fc94 | 10266 | gas_assert (!mips_opts.micromips); |
c0ebe874 | 10267 | macro_build (NULL, "c2", "C", (op[0] << 16) | 0x02); |
c7af4273 | 10268 | break; |
52b6b6b9 JM |
10269 | |
10270 | case M_MSGWAIT: | |
df58fc94 | 10271 | gas_assert (!mips_opts.micromips); |
52b6b6b9 | 10272 | macro_build (NULL, "c2", "C", 3); |
c7af4273 | 10273 | break; |
52b6b6b9 JM |
10274 | |
10275 | case M_MSGWAIT_T: | |
df58fc94 | 10276 | gas_assert (!mips_opts.micromips); |
c0ebe874 | 10277 | macro_build (NULL, "c2", "C", (op[0] << 16) | 0x03); |
c7af4273 | 10278 | break; |
52b6b6b9 | 10279 | |
252b5132 RH |
10280 | case M_J_A: |
10281 | /* The j instruction may not be used in PIC code, since it | |
10282 | requires an absolute address. We convert it to a b | |
10283 | instruction. */ | |
10284 | if (mips_pic == NO_PIC) | |
67c0d1eb | 10285 | macro_build (&offset_expr, "j", "a"); |
252b5132 | 10286 | else |
67c0d1eb | 10287 | macro_build (&offset_expr, "b", "p"); |
8fc2e39e | 10288 | break; |
252b5132 RH |
10289 | |
10290 | /* The jal instructions must be handled as macros because when | |
10291 | generating PIC code they expand to multi-instruction | |
10292 | sequences. Normally they are simple instructions. */ | |
df58fc94 | 10293 | case M_JALS_1: |
c0ebe874 RS |
10294 | op[1] = op[0]; |
10295 | op[0] = RA; | |
df58fc94 RS |
10296 | /* Fall through. */ |
10297 | case M_JALS_2: | |
10298 | gas_assert (mips_opts.micromips); | |
833794fc MR |
10299 | if (mips_opts.insn32) |
10300 | { | |
1661c76c | 10301 | as_bad (_("opcode not supported in the `insn32' mode `%s'"), str); |
833794fc MR |
10302 | break; |
10303 | } | |
df58fc94 RS |
10304 | jals = 1; |
10305 | goto jal; | |
252b5132 | 10306 | case M_JAL_1: |
c0ebe874 RS |
10307 | op[1] = op[0]; |
10308 | op[0] = RA; | |
252b5132 RH |
10309 | /* Fall through. */ |
10310 | case M_JAL_2: | |
df58fc94 | 10311 | jal: |
3e722fb5 | 10312 | if (mips_pic == NO_PIC) |
df58fc94 RS |
10313 | { |
10314 | s = jals ? "jalrs" : "jalr"; | |
e64af278 | 10315 | if (mips_opts.micromips |
833794fc | 10316 | && !mips_opts.insn32 |
c0ebe874 | 10317 | && op[0] == RA |
e64af278 | 10318 | && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT)) |
c0ebe874 | 10319 | macro_build (NULL, s, "mj", op[1]); |
df58fc94 | 10320 | else |
c0ebe874 | 10321 | macro_build (NULL, s, JALR_FMT, op[0], op[1]); |
df58fc94 | 10322 | } |
0a44bf69 | 10323 | else |
252b5132 | 10324 | { |
df58fc94 RS |
10325 | int cprestore = (mips_pic == SVR4_PIC && !HAVE_NEWABI |
10326 | && mips_cprestore_offset >= 0); | |
10327 | ||
c0ebe874 | 10328 | if (op[1] != PIC_CALL_REG) |
252b5132 | 10329 | as_warn (_("MIPS PIC call to register other than $25")); |
bdaaa2e1 | 10330 | |
833794fc MR |
10331 | s = ((mips_opts.micromips |
10332 | && !mips_opts.insn32 | |
10333 | && (!mips_opts.noreorder || cprestore)) | |
df58fc94 | 10334 | ? "jalrs" : "jalr"); |
e64af278 | 10335 | if (mips_opts.micromips |
833794fc | 10336 | && !mips_opts.insn32 |
c0ebe874 | 10337 | && op[0] == RA |
e64af278 | 10338 | && !(history[0].insn_mo->pinfo2 & INSN2_BRANCH_DELAY_32BIT)) |
c0ebe874 | 10339 | macro_build (NULL, s, "mj", op[1]); |
df58fc94 | 10340 | else |
c0ebe874 | 10341 | macro_build (NULL, s, JALR_FMT, op[0], op[1]); |
0a44bf69 | 10342 | if (mips_pic == SVR4_PIC && !HAVE_NEWABI) |
252b5132 | 10343 | { |
6478892d | 10344 | if (mips_cprestore_offset < 0) |
1661c76c | 10345 | as_warn (_("no .cprestore pseudo-op used in PIC code")); |
6478892d TS |
10346 | else |
10347 | { | |
90ecf173 | 10348 | if (!mips_frame_reg_valid) |
7a621144 | 10349 | { |
1661c76c | 10350 | as_warn (_("no .frame pseudo-op used in PIC code")); |
7a621144 DJ |
10351 | /* Quiet this warning. */ |
10352 | mips_frame_reg_valid = 1; | |
10353 | } | |
90ecf173 | 10354 | if (!mips_cprestore_valid) |
7a621144 | 10355 | { |
1661c76c | 10356 | as_warn (_("no .cprestore pseudo-op used in PIC code")); |
7a621144 DJ |
10357 | /* Quiet this warning. */ |
10358 | mips_cprestore_valid = 1; | |
10359 | } | |
d3fca0b5 MR |
10360 | if (mips_opts.noreorder) |
10361 | macro_build (NULL, "nop", ""); | |
6478892d | 10362 | expr1.X_add_number = mips_cprestore_offset; |
67c0d1eb | 10363 | macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN, |
f899b4b8 | 10364 | mips_gp_register, |
256ab948 TS |
10365 | mips_frame_reg, |
10366 | HAVE_64BIT_ADDRESSES); | |
6478892d | 10367 | } |
252b5132 RH |
10368 | } |
10369 | } | |
252b5132 | 10370 | |
8fc2e39e | 10371 | break; |
252b5132 | 10372 | |
df58fc94 RS |
10373 | case M_JALS_A: |
10374 | gas_assert (mips_opts.micromips); | |
833794fc MR |
10375 | if (mips_opts.insn32) |
10376 | { | |
1661c76c | 10377 | as_bad (_("opcode not supported in the `insn32' mode `%s'"), str); |
833794fc MR |
10378 | break; |
10379 | } | |
df58fc94 RS |
10380 | jals = 1; |
10381 | /* Fall through. */ | |
252b5132 RH |
10382 | case M_JAL_A: |
10383 | if (mips_pic == NO_PIC) | |
df58fc94 | 10384 | macro_build (&offset_expr, jals ? "jals" : "jal", "a"); |
252b5132 RH |
10385 | else if (mips_pic == SVR4_PIC) |
10386 | { | |
10387 | /* If this is a reference to an external symbol, and we are | |
10388 | using a small GOT, we want | |
10389 | lw $25,<sym>($gp) (BFD_RELOC_MIPS_CALL16) | |
10390 | nop | |
f9419b05 | 10391 | jalr $ra,$25 |
252b5132 RH |
10392 | nop |
10393 | lw $gp,cprestore($sp) | |
10394 | The cprestore value is set using the .cprestore | |
10395 | pseudo-op. If we are using a big GOT, we want | |
10396 | lui $25,<sym> (BFD_RELOC_MIPS_CALL_HI16) | |
10397 | addu $25,$25,$gp | |
10398 | lw $25,<sym>($25) (BFD_RELOC_MIPS_CALL_LO16) | |
10399 | nop | |
f9419b05 | 10400 | jalr $ra,$25 |
252b5132 RH |
10401 | nop |
10402 | lw $gp,cprestore($sp) | |
10403 | If the symbol is not external, we want | |
10404 | lw $25,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
10405 | nop | |
10406 | addiu $25,$25,<sym> (BFD_RELOC_LO16) | |
f9419b05 | 10407 | jalr $ra,$25 |
252b5132 | 10408 | nop |
438c16b8 | 10409 | lw $gp,cprestore($sp) |
f5040a92 AO |
10410 | |
10411 | For NewABI, we use the same CALL16 or CALL_HI16/CALL_LO16 | |
10412 | sequences above, minus nops, unless the symbol is local, | |
10413 | which enables us to use GOT_PAGE/GOT_OFST (big got) or | |
10414 | GOT_DISP. */ | |
438c16b8 | 10415 | if (HAVE_NEWABI) |
252b5132 | 10416 | { |
90ecf173 | 10417 | if (!mips_big_got) |
f5040a92 | 10418 | { |
4d7206a2 | 10419 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb RS |
10420 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10421 | PIC_CALL_REG, BFD_RELOC_MIPS_CALL16, | |
f5040a92 | 10422 | mips_gp_register); |
4d7206a2 | 10423 | relax_switch (); |
67c0d1eb RS |
10424 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10425 | PIC_CALL_REG, BFD_RELOC_MIPS_GOT_DISP, | |
4d7206a2 RS |
10426 | mips_gp_register); |
10427 | relax_end (); | |
f5040a92 AO |
10428 | } |
10429 | else | |
10430 | { | |
4d7206a2 | 10431 | relax_start (offset_expr.X_add_symbol); |
df58fc94 | 10432 | macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG, |
67c0d1eb RS |
10433 | BFD_RELOC_MIPS_CALL_HI16); |
10434 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG, | |
10435 | PIC_CALL_REG, mips_gp_register); | |
10436 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", | |
10437 | PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16, | |
10438 | PIC_CALL_REG); | |
4d7206a2 | 10439 | relax_switch (); |
67c0d1eb RS |
10440 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10441 | PIC_CALL_REG, BFD_RELOC_MIPS_GOT_PAGE, | |
10442 | mips_gp_register); | |
10443 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", | |
10444 | PIC_CALL_REG, PIC_CALL_REG, | |
17a2f251 | 10445 | BFD_RELOC_MIPS_GOT_OFST); |
4d7206a2 | 10446 | relax_end (); |
f5040a92 | 10447 | } |
684022ea | 10448 | |
df58fc94 | 10449 | macro_build_jalr (&offset_expr, 0); |
252b5132 RH |
10450 | } |
10451 | else | |
10452 | { | |
4d7206a2 | 10453 | relax_start (offset_expr.X_add_symbol); |
90ecf173 | 10454 | if (!mips_big_got) |
438c16b8 | 10455 | { |
67c0d1eb RS |
10456 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10457 | PIC_CALL_REG, BFD_RELOC_MIPS_CALL16, | |
17a2f251 | 10458 | mips_gp_register); |
269137b2 | 10459 | load_delay_nop (); |
4d7206a2 | 10460 | relax_switch (); |
438c16b8 | 10461 | } |
252b5132 | 10462 | else |
252b5132 | 10463 | { |
67c0d1eb RS |
10464 | int gpdelay; |
10465 | ||
10466 | gpdelay = reg_needs_delay (mips_gp_register); | |
df58fc94 | 10467 | macro_build (&offset_expr, "lui", LUI_FMT, PIC_CALL_REG, |
67c0d1eb RS |
10468 | BFD_RELOC_MIPS_CALL_HI16); |
10469 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", PIC_CALL_REG, | |
10470 | PIC_CALL_REG, mips_gp_register); | |
10471 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", | |
10472 | PIC_CALL_REG, BFD_RELOC_MIPS_CALL_LO16, | |
10473 | PIC_CALL_REG); | |
269137b2 | 10474 | load_delay_nop (); |
4d7206a2 | 10475 | relax_switch (); |
67c0d1eb RS |
10476 | if (gpdelay) |
10477 | macro_build (NULL, "nop", ""); | |
252b5132 | 10478 | } |
67c0d1eb RS |
10479 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
10480 | PIC_CALL_REG, BFD_RELOC_MIPS_GOT16, | |
4d7206a2 | 10481 | mips_gp_register); |
269137b2 | 10482 | load_delay_nop (); |
67c0d1eb RS |
10483 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", |
10484 | PIC_CALL_REG, PIC_CALL_REG, BFD_RELOC_LO16); | |
4d7206a2 | 10485 | relax_end (); |
df58fc94 | 10486 | macro_build_jalr (&offset_expr, mips_cprestore_offset >= 0); |
438c16b8 | 10487 | |
6478892d | 10488 | if (mips_cprestore_offset < 0) |
1661c76c | 10489 | as_warn (_("no .cprestore pseudo-op used in PIC code")); |
6478892d TS |
10490 | else |
10491 | { | |
90ecf173 | 10492 | if (!mips_frame_reg_valid) |
7a621144 | 10493 | { |
1661c76c | 10494 | as_warn (_("no .frame pseudo-op used in PIC code")); |
7a621144 DJ |
10495 | /* Quiet this warning. */ |
10496 | mips_frame_reg_valid = 1; | |
10497 | } | |
90ecf173 | 10498 | if (!mips_cprestore_valid) |
7a621144 | 10499 | { |
1661c76c | 10500 | as_warn (_("no .cprestore pseudo-op used in PIC code")); |
7a621144 DJ |
10501 | /* Quiet this warning. */ |
10502 | mips_cprestore_valid = 1; | |
10503 | } | |
6478892d | 10504 | if (mips_opts.noreorder) |
67c0d1eb | 10505 | macro_build (NULL, "nop", ""); |
6478892d | 10506 | expr1.X_add_number = mips_cprestore_offset; |
67c0d1eb | 10507 | macro_build_ldst_constoffset (&expr1, ADDRESS_LOAD_INSN, |
f899b4b8 | 10508 | mips_gp_register, |
256ab948 TS |
10509 | mips_frame_reg, |
10510 | HAVE_64BIT_ADDRESSES); | |
6478892d | 10511 | } |
252b5132 RH |
10512 | } |
10513 | } | |
0a44bf69 | 10514 | else if (mips_pic == VXWORKS_PIC) |
1661c76c | 10515 | as_bad (_("non-PIC jump used in PIC library")); |
252b5132 RH |
10516 | else |
10517 | abort (); | |
10518 | ||
8fc2e39e | 10519 | break; |
252b5132 | 10520 | |
7f3c4072 | 10521 | case M_LBUE_AB: |
7f3c4072 CM |
10522 | s = "lbue"; |
10523 | fmt = "t,+j(b)"; | |
10524 | offbits = 9; | |
10525 | goto ld_st; | |
10526 | case M_LHUE_AB: | |
7f3c4072 CM |
10527 | s = "lhue"; |
10528 | fmt = "t,+j(b)"; | |
10529 | offbits = 9; | |
10530 | goto ld_st; | |
10531 | case M_LBE_AB: | |
7f3c4072 CM |
10532 | s = "lbe"; |
10533 | fmt = "t,+j(b)"; | |
10534 | offbits = 9; | |
10535 | goto ld_st; | |
10536 | case M_LHE_AB: | |
7f3c4072 CM |
10537 | s = "lhe"; |
10538 | fmt = "t,+j(b)"; | |
10539 | offbits = 9; | |
10540 | goto ld_st; | |
10541 | case M_LLE_AB: | |
7f3c4072 CM |
10542 | s = "lle"; |
10543 | fmt = "t,+j(b)"; | |
10544 | offbits = 9; | |
10545 | goto ld_st; | |
10546 | case M_LWE_AB: | |
7f3c4072 CM |
10547 | s = "lwe"; |
10548 | fmt = "t,+j(b)"; | |
10549 | offbits = 9; | |
10550 | goto ld_st; | |
10551 | case M_LWLE_AB: | |
7f3c4072 CM |
10552 | s = "lwle"; |
10553 | fmt = "t,+j(b)"; | |
10554 | offbits = 9; | |
10555 | goto ld_st; | |
10556 | case M_LWRE_AB: | |
7f3c4072 CM |
10557 | s = "lwre"; |
10558 | fmt = "t,+j(b)"; | |
10559 | offbits = 9; | |
10560 | goto ld_st; | |
10561 | case M_SBE_AB: | |
7f3c4072 CM |
10562 | s = "sbe"; |
10563 | fmt = "t,+j(b)"; | |
10564 | offbits = 9; | |
10565 | goto ld_st; | |
10566 | case M_SCE_AB: | |
7f3c4072 CM |
10567 | s = "sce"; |
10568 | fmt = "t,+j(b)"; | |
10569 | offbits = 9; | |
10570 | goto ld_st; | |
10571 | case M_SHE_AB: | |
7f3c4072 CM |
10572 | s = "she"; |
10573 | fmt = "t,+j(b)"; | |
10574 | offbits = 9; | |
10575 | goto ld_st; | |
10576 | case M_SWE_AB: | |
7f3c4072 CM |
10577 | s = "swe"; |
10578 | fmt = "t,+j(b)"; | |
10579 | offbits = 9; | |
10580 | goto ld_st; | |
10581 | case M_SWLE_AB: | |
7f3c4072 CM |
10582 | s = "swle"; |
10583 | fmt = "t,+j(b)"; | |
10584 | offbits = 9; | |
10585 | goto ld_st; | |
10586 | case M_SWRE_AB: | |
7f3c4072 CM |
10587 | s = "swre"; |
10588 | fmt = "t,+j(b)"; | |
10589 | offbits = 9; | |
10590 | goto ld_st; | |
dec0624d | 10591 | case M_ACLR_AB: |
dec0624d | 10592 | s = "aclr"; |
dec0624d | 10593 | fmt = "\\,~(b)"; |
7f3c4072 | 10594 | offbits = 12; |
dec0624d MR |
10595 | goto ld_st; |
10596 | case M_ASET_AB: | |
dec0624d | 10597 | s = "aset"; |
dec0624d | 10598 | fmt = "\\,~(b)"; |
7f3c4072 | 10599 | offbits = 12; |
dec0624d | 10600 | goto ld_st; |
252b5132 RH |
10601 | case M_LB_AB: |
10602 | s = "lb"; | |
df58fc94 | 10603 | fmt = "t,o(b)"; |
252b5132 RH |
10604 | goto ld; |
10605 | case M_LBU_AB: | |
10606 | s = "lbu"; | |
df58fc94 | 10607 | fmt = "t,o(b)"; |
252b5132 RH |
10608 | goto ld; |
10609 | case M_LH_AB: | |
10610 | s = "lh"; | |
df58fc94 | 10611 | fmt = "t,o(b)"; |
252b5132 RH |
10612 | goto ld; |
10613 | case M_LHU_AB: | |
10614 | s = "lhu"; | |
df58fc94 | 10615 | fmt = "t,o(b)"; |
252b5132 RH |
10616 | goto ld; |
10617 | case M_LW_AB: | |
10618 | s = "lw"; | |
df58fc94 | 10619 | fmt = "t,o(b)"; |
252b5132 RH |
10620 | goto ld; |
10621 | case M_LWC0_AB: | |
df58fc94 | 10622 | gas_assert (!mips_opts.micromips); |
252b5132 | 10623 | s = "lwc0"; |
df58fc94 | 10624 | fmt = "E,o(b)"; |
bdaaa2e1 | 10625 | /* Itbl support may require additional care here. */ |
252b5132 | 10626 | coproc = 1; |
df58fc94 | 10627 | goto ld_st; |
252b5132 RH |
10628 | case M_LWC1_AB: |
10629 | s = "lwc1"; | |
df58fc94 | 10630 | fmt = "T,o(b)"; |
bdaaa2e1 | 10631 | /* Itbl support may require additional care here. */ |
252b5132 | 10632 | coproc = 1; |
df58fc94 | 10633 | goto ld_st; |
252b5132 RH |
10634 | case M_LWC2_AB: |
10635 | s = "lwc2"; | |
df58fc94 | 10636 | fmt = COP12_FMT; |
7f3c4072 | 10637 | offbits = (mips_opts.micromips ? 12 : 16); |
bdaaa2e1 | 10638 | /* Itbl support may require additional care here. */ |
252b5132 | 10639 | coproc = 1; |
df58fc94 | 10640 | goto ld_st; |
252b5132 | 10641 | case M_LWC3_AB: |
df58fc94 | 10642 | gas_assert (!mips_opts.micromips); |
252b5132 | 10643 | s = "lwc3"; |
df58fc94 | 10644 | fmt = "E,o(b)"; |
bdaaa2e1 | 10645 | /* Itbl support may require additional care here. */ |
252b5132 | 10646 | coproc = 1; |
df58fc94 | 10647 | goto ld_st; |
252b5132 RH |
10648 | case M_LWL_AB: |
10649 | s = "lwl"; | |
df58fc94 | 10650 | fmt = MEM12_FMT; |
7f3c4072 | 10651 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10652 | goto ld_st; |
252b5132 RH |
10653 | case M_LWR_AB: |
10654 | s = "lwr"; | |
df58fc94 | 10655 | fmt = MEM12_FMT; |
7f3c4072 | 10656 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10657 | goto ld_st; |
252b5132 | 10658 | case M_LDC1_AB: |
252b5132 | 10659 | s = "ldc1"; |
df58fc94 | 10660 | fmt = "T,o(b)"; |
bdaaa2e1 | 10661 | /* Itbl support may require additional care here. */ |
252b5132 | 10662 | coproc = 1; |
df58fc94 | 10663 | goto ld_st; |
252b5132 RH |
10664 | case M_LDC2_AB: |
10665 | s = "ldc2"; | |
df58fc94 | 10666 | fmt = COP12_FMT; |
7f3c4072 | 10667 | offbits = (mips_opts.micromips ? 12 : 16); |
bdaaa2e1 | 10668 | /* Itbl support may require additional care here. */ |
252b5132 | 10669 | coproc = 1; |
df58fc94 | 10670 | goto ld_st; |
c77c0862 | 10671 | case M_LQC2_AB: |
c77c0862 | 10672 | s = "lqc2"; |
14daeee3 | 10673 | fmt = "+7,o(b)"; |
c77c0862 RS |
10674 | /* Itbl support may require additional care here. */ |
10675 | coproc = 1; | |
10676 | goto ld_st; | |
252b5132 RH |
10677 | case M_LDC3_AB: |
10678 | s = "ldc3"; | |
df58fc94 | 10679 | fmt = "E,o(b)"; |
bdaaa2e1 | 10680 | /* Itbl support may require additional care here. */ |
252b5132 | 10681 | coproc = 1; |
df58fc94 | 10682 | goto ld_st; |
252b5132 RH |
10683 | case M_LDL_AB: |
10684 | s = "ldl"; | |
df58fc94 | 10685 | fmt = MEM12_FMT; |
7f3c4072 | 10686 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10687 | goto ld_st; |
252b5132 RH |
10688 | case M_LDR_AB: |
10689 | s = "ldr"; | |
df58fc94 | 10690 | fmt = MEM12_FMT; |
7f3c4072 | 10691 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10692 | goto ld_st; |
252b5132 RH |
10693 | case M_LL_AB: |
10694 | s = "ll"; | |
df58fc94 | 10695 | fmt = MEM12_FMT; |
7f3c4072 | 10696 | offbits = (mips_opts.micromips ? 12 : 16); |
252b5132 RH |
10697 | goto ld; |
10698 | case M_LLD_AB: | |
10699 | s = "lld"; | |
df58fc94 | 10700 | fmt = MEM12_FMT; |
7f3c4072 | 10701 | offbits = (mips_opts.micromips ? 12 : 16); |
252b5132 RH |
10702 | goto ld; |
10703 | case M_LWU_AB: | |
10704 | s = "lwu"; | |
df58fc94 | 10705 | fmt = MEM12_FMT; |
7f3c4072 | 10706 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 RS |
10707 | goto ld; |
10708 | case M_LWP_AB: | |
df58fc94 RS |
10709 | gas_assert (mips_opts.micromips); |
10710 | s = "lwp"; | |
10711 | fmt = "t,~(b)"; | |
7f3c4072 | 10712 | offbits = 12; |
df58fc94 RS |
10713 | lp = 1; |
10714 | goto ld; | |
10715 | case M_LDP_AB: | |
df58fc94 RS |
10716 | gas_assert (mips_opts.micromips); |
10717 | s = "ldp"; | |
10718 | fmt = "t,~(b)"; | |
7f3c4072 | 10719 | offbits = 12; |
df58fc94 RS |
10720 | lp = 1; |
10721 | goto ld; | |
10722 | case M_LWM_AB: | |
df58fc94 RS |
10723 | gas_assert (mips_opts.micromips); |
10724 | s = "lwm"; | |
10725 | fmt = "n,~(b)"; | |
7f3c4072 | 10726 | offbits = 12; |
df58fc94 RS |
10727 | goto ld_st; |
10728 | case M_LDM_AB: | |
df58fc94 RS |
10729 | gas_assert (mips_opts.micromips); |
10730 | s = "ldm"; | |
10731 | fmt = "n,~(b)"; | |
7f3c4072 | 10732 | offbits = 12; |
df58fc94 RS |
10733 | goto ld_st; |
10734 | ||
252b5132 | 10735 | ld: |
f19ccbda | 10736 | /* We don't want to use $0 as tempreg. */ |
c0ebe874 | 10737 | if (op[2] == op[0] + lp || op[0] + lp == ZERO) |
df58fc94 | 10738 | goto ld_st; |
252b5132 | 10739 | else |
c0ebe874 | 10740 | tempreg = op[0] + lp; |
df58fc94 RS |
10741 | goto ld_noat; |
10742 | ||
252b5132 RH |
10743 | case M_SB_AB: |
10744 | s = "sb"; | |
df58fc94 RS |
10745 | fmt = "t,o(b)"; |
10746 | goto ld_st; | |
252b5132 RH |
10747 | case M_SH_AB: |
10748 | s = "sh"; | |
df58fc94 RS |
10749 | fmt = "t,o(b)"; |
10750 | goto ld_st; | |
252b5132 RH |
10751 | case M_SW_AB: |
10752 | s = "sw"; | |
df58fc94 RS |
10753 | fmt = "t,o(b)"; |
10754 | goto ld_st; | |
252b5132 | 10755 | case M_SWC0_AB: |
df58fc94 | 10756 | gas_assert (!mips_opts.micromips); |
252b5132 | 10757 | s = "swc0"; |
df58fc94 | 10758 | fmt = "E,o(b)"; |
bdaaa2e1 | 10759 | /* Itbl support may require additional care here. */ |
252b5132 | 10760 | coproc = 1; |
df58fc94 | 10761 | goto ld_st; |
252b5132 RH |
10762 | case M_SWC1_AB: |
10763 | s = "swc1"; | |
df58fc94 | 10764 | fmt = "T,o(b)"; |
bdaaa2e1 | 10765 | /* Itbl support may require additional care here. */ |
252b5132 | 10766 | coproc = 1; |
df58fc94 | 10767 | goto ld_st; |
252b5132 RH |
10768 | case M_SWC2_AB: |
10769 | s = "swc2"; | |
df58fc94 | 10770 | fmt = COP12_FMT; |
7f3c4072 | 10771 | offbits = (mips_opts.micromips ? 12 : 16); |
bdaaa2e1 | 10772 | /* Itbl support may require additional care here. */ |
252b5132 | 10773 | coproc = 1; |
df58fc94 | 10774 | goto ld_st; |
252b5132 | 10775 | case M_SWC3_AB: |
df58fc94 | 10776 | gas_assert (!mips_opts.micromips); |
252b5132 | 10777 | s = "swc3"; |
df58fc94 | 10778 | fmt = "E,o(b)"; |
bdaaa2e1 | 10779 | /* Itbl support may require additional care here. */ |
252b5132 | 10780 | coproc = 1; |
df58fc94 | 10781 | goto ld_st; |
252b5132 RH |
10782 | case M_SWL_AB: |
10783 | s = "swl"; | |
df58fc94 | 10784 | fmt = MEM12_FMT; |
7f3c4072 | 10785 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10786 | goto ld_st; |
252b5132 RH |
10787 | case M_SWR_AB: |
10788 | s = "swr"; | |
df58fc94 | 10789 | fmt = MEM12_FMT; |
7f3c4072 | 10790 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10791 | goto ld_st; |
252b5132 RH |
10792 | case M_SC_AB: |
10793 | s = "sc"; | |
df58fc94 | 10794 | fmt = MEM12_FMT; |
7f3c4072 | 10795 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10796 | goto ld_st; |
252b5132 RH |
10797 | case M_SCD_AB: |
10798 | s = "scd"; | |
df58fc94 | 10799 | fmt = MEM12_FMT; |
7f3c4072 | 10800 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10801 | goto ld_st; |
d43b4baf TS |
10802 | case M_CACHE_AB: |
10803 | s = "cache"; | |
df58fc94 | 10804 | fmt = mips_opts.micromips ? "k,~(b)" : "k,o(b)"; |
7f3c4072 CM |
10805 | offbits = (mips_opts.micromips ? 12 : 16); |
10806 | goto ld_st; | |
10807 | case M_CACHEE_AB: | |
7f3c4072 CM |
10808 | s = "cachee"; |
10809 | fmt = "k,+j(b)"; | |
10810 | offbits = 9; | |
df58fc94 | 10811 | goto ld_st; |
3eebd5eb MR |
10812 | case M_PREF_AB: |
10813 | s = "pref"; | |
df58fc94 | 10814 | fmt = !mips_opts.micromips ? "k,o(b)" : "k,~(b)"; |
7f3c4072 CM |
10815 | offbits = (mips_opts.micromips ? 12 : 16); |
10816 | goto ld_st; | |
10817 | case M_PREFE_AB: | |
7f3c4072 CM |
10818 | s = "prefe"; |
10819 | fmt = "k,+j(b)"; | |
10820 | offbits = 9; | |
df58fc94 | 10821 | goto ld_st; |
252b5132 | 10822 | case M_SDC1_AB: |
252b5132 | 10823 | s = "sdc1"; |
df58fc94 | 10824 | fmt = "T,o(b)"; |
252b5132 | 10825 | coproc = 1; |
bdaaa2e1 | 10826 | /* Itbl support may require additional care here. */ |
df58fc94 | 10827 | goto ld_st; |
252b5132 RH |
10828 | case M_SDC2_AB: |
10829 | s = "sdc2"; | |
df58fc94 | 10830 | fmt = COP12_FMT; |
7f3c4072 | 10831 | offbits = (mips_opts.micromips ? 12 : 16); |
c77c0862 RS |
10832 | /* Itbl support may require additional care here. */ |
10833 | coproc = 1; | |
10834 | goto ld_st; | |
10835 | case M_SQC2_AB: | |
c77c0862 | 10836 | s = "sqc2"; |
14daeee3 | 10837 | fmt = "+7,o(b)"; |
bdaaa2e1 | 10838 | /* Itbl support may require additional care here. */ |
252b5132 | 10839 | coproc = 1; |
df58fc94 | 10840 | goto ld_st; |
252b5132 | 10841 | case M_SDC3_AB: |
df58fc94 | 10842 | gas_assert (!mips_opts.micromips); |
252b5132 | 10843 | s = "sdc3"; |
df58fc94 | 10844 | fmt = "E,o(b)"; |
bdaaa2e1 | 10845 | /* Itbl support may require additional care here. */ |
252b5132 | 10846 | coproc = 1; |
df58fc94 | 10847 | goto ld_st; |
252b5132 RH |
10848 | case M_SDL_AB: |
10849 | s = "sdl"; | |
df58fc94 | 10850 | fmt = MEM12_FMT; |
7f3c4072 | 10851 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 | 10852 | goto ld_st; |
252b5132 RH |
10853 | case M_SDR_AB: |
10854 | s = "sdr"; | |
df58fc94 | 10855 | fmt = MEM12_FMT; |
7f3c4072 | 10856 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 RS |
10857 | goto ld_st; |
10858 | case M_SWP_AB: | |
df58fc94 RS |
10859 | gas_assert (mips_opts.micromips); |
10860 | s = "swp"; | |
10861 | fmt = "t,~(b)"; | |
7f3c4072 | 10862 | offbits = 12; |
df58fc94 RS |
10863 | goto ld_st; |
10864 | case M_SDP_AB: | |
df58fc94 RS |
10865 | gas_assert (mips_opts.micromips); |
10866 | s = "sdp"; | |
10867 | fmt = "t,~(b)"; | |
7f3c4072 | 10868 | offbits = 12; |
df58fc94 RS |
10869 | goto ld_st; |
10870 | case M_SWM_AB: | |
df58fc94 RS |
10871 | gas_assert (mips_opts.micromips); |
10872 | s = "swm"; | |
10873 | fmt = "n,~(b)"; | |
7f3c4072 | 10874 | offbits = 12; |
df58fc94 RS |
10875 | goto ld_st; |
10876 | case M_SDM_AB: | |
df58fc94 RS |
10877 | gas_assert (mips_opts.micromips); |
10878 | s = "sdm"; | |
10879 | fmt = "n,~(b)"; | |
7f3c4072 | 10880 | offbits = 12; |
df58fc94 RS |
10881 | |
10882 | ld_st: | |
8fc2e39e | 10883 | tempreg = AT; |
df58fc94 | 10884 | ld_noat: |
c0ebe874 | 10885 | breg = op[2]; |
f2ae14a1 RS |
10886 | if (small_offset_p (0, align, 16)) |
10887 | { | |
10888 | /* The first case exists for M_LD_AB and M_SD_AB, which are | |
10889 | macros for o32 but which should act like normal instructions | |
10890 | otherwise. */ | |
10891 | if (offbits == 16) | |
c0ebe874 | 10892 | macro_build (&offset_expr, s, fmt, op[0], -1, offset_reloc[0], |
f2ae14a1 RS |
10893 | offset_reloc[1], offset_reloc[2], breg); |
10894 | else if (small_offset_p (0, align, offbits)) | |
10895 | { | |
10896 | if (offbits == 0) | |
c0ebe874 | 10897 | macro_build (NULL, s, fmt, op[0], breg); |
f2ae14a1 | 10898 | else |
c0ebe874 | 10899 | macro_build (NULL, s, fmt, op[0], |
c8276761 | 10900 | (int) offset_expr.X_add_number, breg); |
f2ae14a1 RS |
10901 | } |
10902 | else | |
10903 | { | |
10904 | if (tempreg == AT) | |
10905 | used_at = 1; | |
10906 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", | |
10907 | tempreg, breg, -1, offset_reloc[0], | |
10908 | offset_reloc[1], offset_reloc[2]); | |
10909 | if (offbits == 0) | |
c0ebe874 | 10910 | macro_build (NULL, s, fmt, op[0], tempreg); |
f2ae14a1 | 10911 | else |
c0ebe874 | 10912 | macro_build (NULL, s, fmt, op[0], 0, tempreg); |
f2ae14a1 RS |
10913 | } |
10914 | break; | |
10915 | } | |
10916 | ||
10917 | if (tempreg == AT) | |
10918 | used_at = 1; | |
10919 | ||
252b5132 RH |
10920 | if (offset_expr.X_op != O_constant |
10921 | && offset_expr.X_op != O_symbol) | |
10922 | { | |
1661c76c | 10923 | as_bad (_("expression too complex")); |
252b5132 RH |
10924 | offset_expr.X_op = O_constant; |
10925 | } | |
10926 | ||
2051e8c4 MR |
10927 | if (HAVE_32BIT_ADDRESSES |
10928 | && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number)) | |
55e08f71 NC |
10929 | { |
10930 | char value [32]; | |
10931 | ||
10932 | sprintf_vma (value, offset_expr.X_add_number); | |
1661c76c | 10933 | as_bad (_("number (0x%s) larger than 32 bits"), value); |
55e08f71 | 10934 | } |
2051e8c4 | 10935 | |
252b5132 RH |
10936 | /* A constant expression in PIC code can be handled just as it |
10937 | is in non PIC code. */ | |
aed1a261 RS |
10938 | if (offset_expr.X_op == O_constant) |
10939 | { | |
f2ae14a1 RS |
10940 | expr1.X_add_number = offset_high_part (offset_expr.X_add_number, |
10941 | offbits == 0 ? 16 : offbits); | |
10942 | offset_expr.X_add_number -= expr1.X_add_number; | |
df58fc94 | 10943 | |
f2ae14a1 RS |
10944 | load_register (tempreg, &expr1, HAVE_64BIT_ADDRESSES); |
10945 | if (breg != 0) | |
10946 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
10947 | tempreg, tempreg, breg); | |
7f3c4072 | 10948 | if (offbits == 0) |
dd6a37e7 | 10949 | { |
f2ae14a1 | 10950 | if (offset_expr.X_add_number != 0) |
dd6a37e7 | 10951 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, |
f2ae14a1 | 10952 | "t,r,j", tempreg, tempreg, BFD_RELOC_LO16); |
c0ebe874 | 10953 | macro_build (NULL, s, fmt, op[0], tempreg); |
dd6a37e7 | 10954 | } |
7f3c4072 | 10955 | else if (offbits == 16) |
c0ebe874 | 10956 | macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16, tempreg); |
df58fc94 | 10957 | else |
c0ebe874 | 10958 | macro_build (NULL, s, fmt, op[0], |
c8276761 | 10959 | (int) offset_expr.X_add_number, tempreg); |
df58fc94 | 10960 | } |
7f3c4072 | 10961 | else if (offbits != 16) |
df58fc94 | 10962 | { |
7f3c4072 CM |
10963 | /* The offset field is too narrow to be used for a low-part |
10964 | relocation, so load the whole address into the auxillary | |
f2ae14a1 RS |
10965 | register. */ |
10966 | load_address (tempreg, &offset_expr, &used_at); | |
10967 | if (breg != 0) | |
10968 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
10969 | tempreg, tempreg, breg); | |
7f3c4072 | 10970 | if (offbits == 0) |
c0ebe874 | 10971 | macro_build (NULL, s, fmt, op[0], tempreg); |
dd6a37e7 | 10972 | else |
c0ebe874 | 10973 | macro_build (NULL, s, fmt, op[0], 0, tempreg); |
aed1a261 RS |
10974 | } |
10975 | else if (mips_pic == NO_PIC) | |
252b5132 RH |
10976 | { |
10977 | /* If this is a reference to a GP relative symbol, and there | |
10978 | is no base register, we want | |
c0ebe874 | 10979 | <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16) |
252b5132 RH |
10980 | Otherwise, if there is no base register, we want |
10981 | lui $tempreg,<sym> (BFD_RELOC_HI16_S) | |
c0ebe874 | 10982 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
252b5132 RH |
10983 | If we have a constant, we need two instructions anyhow, |
10984 | so we always use the latter form. | |
10985 | ||
10986 | If we have a base register, and this is a reference to a | |
10987 | GP relative symbol, we want | |
10988 | addu $tempreg,$breg,$gp | |
c0ebe874 | 10989 | <op> op[0],<sym>($tempreg) (BFD_RELOC_GPREL16) |
252b5132 RH |
10990 | Otherwise we want |
10991 | lui $tempreg,<sym> (BFD_RELOC_HI16_S) | |
10992 | addu $tempreg,$tempreg,$breg | |
c0ebe874 | 10993 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
d6bc6245 | 10994 | With a constant we always use the latter case. |
76b3015f | 10995 | |
d6bc6245 TS |
10996 | With 64bit address space and no base register and $at usable, |
10997 | we want | |
10998 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
10999 | lui $at,<sym> (BFD_RELOC_HI16_S) | |
11000 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
11001 | dsll32 $tempreg,0 | |
11002 | daddu $tempreg,$at | |
c0ebe874 | 11003 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
d6bc6245 TS |
11004 | If we have a base register, we want |
11005 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
11006 | lui $at,<sym> (BFD_RELOC_HI16_S) | |
11007 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
11008 | daddu $at,$breg | |
11009 | dsll32 $tempreg,0 | |
11010 | daddu $tempreg,$at | |
c0ebe874 | 11011 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
d6bc6245 TS |
11012 | |
11013 | Without $at we can't generate the optimal path for superscalar | |
11014 | processors here since this would require two temporary registers. | |
11015 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
11016 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
11017 | dsll $tempreg,16 | |
11018 | daddiu $tempreg,<sym> (BFD_RELOC_HI16_S) | |
11019 | dsll $tempreg,16 | |
c0ebe874 | 11020 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
d6bc6245 TS |
11021 | If we have a base register, we want |
11022 | lui $tempreg,<sym> (BFD_RELOC_MIPS_HIGHEST) | |
11023 | daddiu $tempreg,<sym> (BFD_RELOC_MIPS_HIGHER) | |
11024 | dsll $tempreg,16 | |
11025 | daddiu $tempreg,<sym> (BFD_RELOC_HI16_S) | |
11026 | dsll $tempreg,16 | |
11027 | daddu $tempreg,$tempreg,$breg | |
c0ebe874 | 11028 | <op> op[0],<sym>($tempreg) (BFD_RELOC_LO16) |
6373ee54 | 11029 | |
6caf9ef4 | 11030 | For GP relative symbols in 64bit address space we can use |
aed1a261 RS |
11031 | the same sequence as in 32bit address space. */ |
11032 | if (HAVE_64BIT_SYMBOLS) | |
d6bc6245 | 11033 | { |
aed1a261 | 11034 | if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET |
6caf9ef4 TS |
11035 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) |
11036 | { | |
11037 | relax_start (offset_expr.X_add_symbol); | |
11038 | if (breg == 0) | |
11039 | { | |
c0ebe874 | 11040 | macro_build (&offset_expr, s, fmt, op[0], |
6caf9ef4 TS |
11041 | BFD_RELOC_GPREL16, mips_gp_register); |
11042 | } | |
11043 | else | |
11044 | { | |
11045 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
11046 | tempreg, breg, mips_gp_register); | |
c0ebe874 | 11047 | macro_build (&offset_expr, s, fmt, op[0], |
6caf9ef4 TS |
11048 | BFD_RELOC_GPREL16, tempreg); |
11049 | } | |
11050 | relax_switch (); | |
11051 | } | |
d6bc6245 | 11052 | |
741fe287 | 11053 | if (used_at == 0 && mips_opts.at) |
d6bc6245 | 11054 | { |
df58fc94 | 11055 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, |
67c0d1eb | 11056 | BFD_RELOC_MIPS_HIGHEST); |
df58fc94 | 11057 | macro_build (&offset_expr, "lui", LUI_FMT, AT, |
67c0d1eb RS |
11058 | BFD_RELOC_HI16_S); |
11059 | macro_build (&offset_expr, "daddiu", "t,r,j", tempreg, | |
11060 | tempreg, BFD_RELOC_MIPS_HIGHER); | |
d6bc6245 | 11061 | if (breg != 0) |
67c0d1eb | 11062 | macro_build (NULL, "daddu", "d,v,t", AT, AT, breg); |
df58fc94 | 11063 | macro_build (NULL, "dsll32", SHFT_FMT, tempreg, tempreg, 0); |
67c0d1eb | 11064 | macro_build (NULL, "daddu", "d,v,t", tempreg, tempreg, AT); |
c0ebe874 | 11065 | macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_LO16, |
67c0d1eb | 11066 | tempreg); |
d6bc6245 TS |
11067 | used_at = 1; |
11068 | } | |
11069 | else | |
11070 | { | |
df58fc94 | 11071 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, |
67c0d1eb RS |
11072 | BFD_RELOC_MIPS_HIGHEST); |
11073 | macro_build (&offset_expr, "daddiu", "t,r,j", tempreg, | |
11074 | tempreg, BFD_RELOC_MIPS_HIGHER); | |
df58fc94 | 11075 | macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16); |
67c0d1eb RS |
11076 | macro_build (&offset_expr, "daddiu", "t,r,j", tempreg, |
11077 | tempreg, BFD_RELOC_HI16_S); | |
df58fc94 | 11078 | macro_build (NULL, "dsll", SHFT_FMT, tempreg, tempreg, 16); |
d6bc6245 | 11079 | if (breg != 0) |
67c0d1eb | 11080 | macro_build (NULL, "daddu", "d,v,t", |
17a2f251 | 11081 | tempreg, tempreg, breg); |
c0ebe874 | 11082 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11083 | BFD_RELOC_LO16, tempreg); |
d6bc6245 | 11084 | } |
6caf9ef4 TS |
11085 | |
11086 | if (mips_relax.sequence) | |
11087 | relax_end (); | |
8fc2e39e | 11088 | break; |
d6bc6245 | 11089 | } |
256ab948 | 11090 | |
252b5132 RH |
11091 | if (breg == 0) |
11092 | { | |
67c0d1eb | 11093 | if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET |
6caf9ef4 | 11094 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) |
252b5132 | 11095 | { |
4d7206a2 | 11096 | relax_start (offset_expr.X_add_symbol); |
c0ebe874 | 11097 | macro_build (&offset_expr, s, fmt, op[0], BFD_RELOC_GPREL16, |
67c0d1eb | 11098 | mips_gp_register); |
4d7206a2 | 11099 | relax_switch (); |
252b5132 | 11100 | } |
67c0d1eb | 11101 | macro_build_lui (&offset_expr, tempreg); |
c0ebe874 | 11102 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11103 | BFD_RELOC_LO16, tempreg); |
4d7206a2 RS |
11104 | if (mips_relax.sequence) |
11105 | relax_end (); | |
252b5132 RH |
11106 | } |
11107 | else | |
11108 | { | |
67c0d1eb | 11109 | if ((valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET |
6caf9ef4 | 11110 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) |
252b5132 | 11111 | { |
4d7206a2 | 11112 | relax_start (offset_expr.X_add_symbol); |
67c0d1eb | 11113 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11114 | tempreg, breg, mips_gp_register); |
c0ebe874 | 11115 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11116 | BFD_RELOC_GPREL16, tempreg); |
4d7206a2 | 11117 | relax_switch (); |
252b5132 | 11118 | } |
67c0d1eb RS |
11119 | macro_build_lui (&offset_expr, tempreg); |
11120 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
17a2f251 | 11121 | tempreg, tempreg, breg); |
c0ebe874 | 11122 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11123 | BFD_RELOC_LO16, tempreg); |
4d7206a2 RS |
11124 | if (mips_relax.sequence) |
11125 | relax_end (); | |
252b5132 RH |
11126 | } |
11127 | } | |
0a44bf69 | 11128 | else if (!mips_big_got) |
252b5132 | 11129 | { |
ed6fb7bd | 11130 | int lw_reloc_type = (int) BFD_RELOC_MIPS_GOT16; |
f9419b05 | 11131 | |
252b5132 RH |
11132 | /* If this is a reference to an external symbol, we want |
11133 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11134 | nop | |
c0ebe874 | 11135 | <op> op[0],0($tempreg) |
252b5132 RH |
11136 | Otherwise we want |
11137 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11138 | nop | |
11139 | addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16) | |
c0ebe874 | 11140 | <op> op[0],0($tempreg) |
f5040a92 AO |
11141 | |
11142 | For NewABI, we want | |
11143 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE) | |
c0ebe874 | 11144 | <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) |
f5040a92 | 11145 | |
252b5132 RH |
11146 | If there is a base register, we add it to $tempreg before |
11147 | the <op>. If there is a constant, we stick it in the | |
11148 | <op> instruction. We don't handle constants larger than | |
11149 | 16 bits, because we have no way to load the upper 16 bits | |
11150 | (actually, we could handle them for the subset of cases | |
11151 | in which we are not using $at). */ | |
9c2799c2 | 11152 | gas_assert (offset_expr.X_op == O_symbol); |
f5040a92 AO |
11153 | if (HAVE_NEWABI) |
11154 | { | |
67c0d1eb RS |
11155 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
11156 | BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register); | |
f5040a92 | 11157 | if (breg != 0) |
67c0d1eb | 11158 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11159 | tempreg, tempreg, breg); |
c0ebe874 | 11160 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11161 | BFD_RELOC_MIPS_GOT_OFST, tempreg); |
f5040a92 AO |
11162 | break; |
11163 | } | |
252b5132 RH |
11164 | expr1.X_add_number = offset_expr.X_add_number; |
11165 | offset_expr.X_add_number = 0; | |
11166 | if (expr1.X_add_number < -0x8000 | |
11167 | || expr1.X_add_number >= 0x8000) | |
11168 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
67c0d1eb RS |
11169 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
11170 | lw_reloc_type, mips_gp_register); | |
269137b2 | 11171 | load_delay_nop (); |
4d7206a2 RS |
11172 | relax_start (offset_expr.X_add_symbol); |
11173 | relax_switch (); | |
67c0d1eb RS |
11174 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg, |
11175 | tempreg, BFD_RELOC_LO16); | |
4d7206a2 | 11176 | relax_end (); |
252b5132 | 11177 | if (breg != 0) |
67c0d1eb | 11178 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11179 | tempreg, tempreg, breg); |
c0ebe874 | 11180 | macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg); |
252b5132 | 11181 | } |
0a44bf69 | 11182 | else if (mips_big_got && !HAVE_NEWABI) |
252b5132 | 11183 | { |
67c0d1eb | 11184 | int gpdelay; |
252b5132 RH |
11185 | |
11186 | /* If this is a reference to an external symbol, we want | |
11187 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
11188 | addu $tempreg,$tempreg,$gp | |
11189 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
c0ebe874 | 11190 | <op> op[0],0($tempreg) |
252b5132 RH |
11191 | Otherwise we want |
11192 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11193 | nop | |
11194 | addiu $tempreg,$tempreg,<sym> (BFD_RELOC_LO16) | |
c0ebe874 | 11195 | <op> op[0],0($tempreg) |
252b5132 RH |
11196 | If there is a base register, we add it to $tempreg before |
11197 | the <op>. If there is a constant, we stick it in the | |
11198 | <op> instruction. We don't handle constants larger than | |
11199 | 16 bits, because we have no way to load the upper 16 bits | |
11200 | (actually, we could handle them for the subset of cases | |
f5040a92 | 11201 | in which we are not using $at). */ |
9c2799c2 | 11202 | gas_assert (offset_expr.X_op == O_symbol); |
252b5132 RH |
11203 | expr1.X_add_number = offset_expr.X_add_number; |
11204 | offset_expr.X_add_number = 0; | |
11205 | if (expr1.X_add_number < -0x8000 | |
11206 | || expr1.X_add_number >= 0x8000) | |
11207 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
67c0d1eb | 11208 | gpdelay = reg_needs_delay (mips_gp_register); |
4d7206a2 | 11209 | relax_start (offset_expr.X_add_symbol); |
df58fc94 | 11210 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, |
17a2f251 | 11211 | BFD_RELOC_MIPS_GOT_HI16); |
67c0d1eb RS |
11212 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg, |
11213 | mips_gp_register); | |
11214 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, | |
11215 | BFD_RELOC_MIPS_GOT_LO16, tempreg); | |
4d7206a2 | 11216 | relax_switch (); |
67c0d1eb RS |
11217 | if (gpdelay) |
11218 | macro_build (NULL, "nop", ""); | |
11219 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, | |
11220 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
269137b2 | 11221 | load_delay_nop (); |
67c0d1eb RS |
11222 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", tempreg, |
11223 | tempreg, BFD_RELOC_LO16); | |
4d7206a2 RS |
11224 | relax_end (); |
11225 | ||
252b5132 | 11226 | if (breg != 0) |
67c0d1eb | 11227 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11228 | tempreg, tempreg, breg); |
c0ebe874 | 11229 | macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg); |
252b5132 | 11230 | } |
0a44bf69 | 11231 | else if (mips_big_got && HAVE_NEWABI) |
f5040a92 | 11232 | { |
f5040a92 AO |
11233 | /* If this is a reference to an external symbol, we want |
11234 | lui $tempreg,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
11235 | add $tempreg,$tempreg,$gp | |
11236 | lw $tempreg,<sym>($tempreg) (BFD_RELOC_MIPS_GOT_LO16) | |
c0ebe874 | 11237 | <op> op[0],<ofst>($tempreg) |
f5040a92 AO |
11238 | Otherwise, for local symbols, we want: |
11239 | lw $tempreg,<sym>($gp) (BFD_RELOC_MIPS_GOT_PAGE) | |
c0ebe874 | 11240 | <op> op[0],<sym>($tempreg) (BFD_RELOC_MIPS_GOT_OFST) */ |
9c2799c2 | 11241 | gas_assert (offset_expr.X_op == O_symbol); |
4d7206a2 | 11242 | expr1.X_add_number = offset_expr.X_add_number; |
f5040a92 AO |
11243 | offset_expr.X_add_number = 0; |
11244 | if (expr1.X_add_number < -0x8000 | |
11245 | || expr1.X_add_number >= 0x8000) | |
11246 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
4d7206a2 | 11247 | relax_start (offset_expr.X_add_symbol); |
df58fc94 | 11248 | macro_build (&offset_expr, "lui", LUI_FMT, tempreg, |
17a2f251 | 11249 | BFD_RELOC_MIPS_GOT_HI16); |
67c0d1eb RS |
11250 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", tempreg, tempreg, |
11251 | mips_gp_register); | |
11252 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, | |
11253 | BFD_RELOC_MIPS_GOT_LO16, tempreg); | |
f5040a92 | 11254 | if (breg != 0) |
67c0d1eb | 11255 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11256 | tempreg, tempreg, breg); |
c0ebe874 | 11257 | macro_build (&expr1, s, fmt, op[0], BFD_RELOC_LO16, tempreg); |
684022ea | 11258 | |
4d7206a2 | 11259 | relax_switch (); |
f5040a92 | 11260 | offset_expr.X_add_number = expr1.X_add_number; |
67c0d1eb RS |
11261 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", tempreg, |
11262 | BFD_RELOC_MIPS_GOT_PAGE, mips_gp_register); | |
f5040a92 | 11263 | if (breg != 0) |
67c0d1eb | 11264 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11265 | tempreg, tempreg, breg); |
c0ebe874 | 11266 | macro_build (&offset_expr, s, fmt, op[0], |
17a2f251 | 11267 | BFD_RELOC_MIPS_GOT_OFST, tempreg); |
4d7206a2 | 11268 | relax_end (); |
f5040a92 | 11269 | } |
252b5132 RH |
11270 | else |
11271 | abort (); | |
11272 | ||
252b5132 RH |
11273 | break; |
11274 | ||
833794fc MR |
11275 | case M_JRADDIUSP: |
11276 | gas_assert (mips_opts.micromips); | |
11277 | gas_assert (mips_opts.insn32); | |
11278 | start_noreorder (); | |
11279 | macro_build (NULL, "jr", "s", RA); | |
c0ebe874 | 11280 | expr1.X_add_number = op[0] << 2; |
833794fc MR |
11281 | macro_build (&expr1, "addiu", "t,r,j", SP, SP, BFD_RELOC_LO16); |
11282 | end_noreorder (); | |
11283 | break; | |
11284 | ||
11285 | case M_JRC: | |
11286 | gas_assert (mips_opts.micromips); | |
11287 | gas_assert (mips_opts.insn32); | |
c0ebe874 | 11288 | macro_build (NULL, "jr", "s", op[0]); |
833794fc MR |
11289 | if (mips_opts.noreorder) |
11290 | macro_build (NULL, "nop", ""); | |
11291 | break; | |
11292 | ||
252b5132 RH |
11293 | case M_LI: |
11294 | case M_LI_S: | |
c0ebe874 | 11295 | load_register (op[0], &imm_expr, 0); |
8fc2e39e | 11296 | break; |
252b5132 RH |
11297 | |
11298 | case M_DLI: | |
c0ebe874 | 11299 | load_register (op[0], &imm_expr, 1); |
8fc2e39e | 11300 | break; |
252b5132 RH |
11301 | |
11302 | case M_LI_SS: | |
11303 | if (imm_expr.X_op == O_constant) | |
11304 | { | |
8fc2e39e | 11305 | used_at = 1; |
67c0d1eb | 11306 | load_register (AT, &imm_expr, 0); |
c0ebe874 | 11307 | macro_build (NULL, "mtc1", "t,G", AT, op[0]); |
252b5132 RH |
11308 | break; |
11309 | } | |
11310 | else | |
11311 | { | |
b0e6f033 RS |
11312 | gas_assert (imm_expr.X_op == O_absent |
11313 | && offset_expr.X_op == O_symbol | |
90ecf173 MR |
11314 | && strcmp (segment_name (S_GET_SEGMENT |
11315 | (offset_expr.X_add_symbol)), | |
11316 | ".lit4") == 0 | |
11317 | && offset_expr.X_add_number == 0); | |
c0ebe874 | 11318 | macro_build (&offset_expr, "lwc1", "T,o(b)", op[0], |
17a2f251 | 11319 | BFD_RELOC_MIPS_LITERAL, mips_gp_register); |
8fc2e39e | 11320 | break; |
252b5132 RH |
11321 | } |
11322 | ||
11323 | case M_LI_D: | |
ca4e0257 RS |
11324 | /* Check if we have a constant in IMM_EXPR. If the GPRs are 64 bits |
11325 | wide, IMM_EXPR is the entire value. Otherwise IMM_EXPR is the high | |
11326 | order 32 bits of the value and the low order 32 bits are either | |
11327 | zero or in OFFSET_EXPR. */ | |
b0e6f033 | 11328 | if (imm_expr.X_op == O_constant) |
252b5132 | 11329 | { |
ca4e0257 | 11330 | if (HAVE_64BIT_GPRS) |
c0ebe874 | 11331 | load_register (op[0], &imm_expr, 1); |
252b5132 RH |
11332 | else |
11333 | { | |
11334 | int hreg, lreg; | |
11335 | ||
11336 | if (target_big_endian) | |
11337 | { | |
c0ebe874 RS |
11338 | hreg = op[0]; |
11339 | lreg = op[0] + 1; | |
252b5132 RH |
11340 | } |
11341 | else | |
11342 | { | |
c0ebe874 RS |
11343 | hreg = op[0] + 1; |
11344 | lreg = op[0]; | |
252b5132 RH |
11345 | } |
11346 | ||
11347 | if (hreg <= 31) | |
67c0d1eb | 11348 | load_register (hreg, &imm_expr, 0); |
252b5132 RH |
11349 | if (lreg <= 31) |
11350 | { | |
11351 | if (offset_expr.X_op == O_absent) | |
67c0d1eb | 11352 | move_register (lreg, 0); |
252b5132 RH |
11353 | else |
11354 | { | |
9c2799c2 | 11355 | gas_assert (offset_expr.X_op == O_constant); |
67c0d1eb | 11356 | load_register (lreg, &offset_expr, 0); |
252b5132 RH |
11357 | } |
11358 | } | |
11359 | } | |
8fc2e39e | 11360 | break; |
252b5132 | 11361 | } |
b0e6f033 | 11362 | gas_assert (imm_expr.X_op == O_absent); |
252b5132 RH |
11363 | |
11364 | /* We know that sym is in the .rdata section. First we get the | |
11365 | upper 16 bits of the address. */ | |
11366 | if (mips_pic == NO_PIC) | |
11367 | { | |
67c0d1eb | 11368 | macro_build_lui (&offset_expr, AT); |
8fc2e39e | 11369 | used_at = 1; |
252b5132 | 11370 | } |
0a44bf69 | 11371 | else |
252b5132 | 11372 | { |
67c0d1eb RS |
11373 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT, |
11374 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
8fc2e39e | 11375 | used_at = 1; |
252b5132 | 11376 | } |
bdaaa2e1 | 11377 | |
252b5132 | 11378 | /* Now we load the register(s). */ |
ca4e0257 | 11379 | if (HAVE_64BIT_GPRS) |
8fc2e39e TS |
11380 | { |
11381 | used_at = 1; | |
c0ebe874 RS |
11382 | macro_build (&offset_expr, "ld", "t,o(b)", op[0], |
11383 | BFD_RELOC_LO16, AT); | |
8fc2e39e | 11384 | } |
252b5132 RH |
11385 | else |
11386 | { | |
8fc2e39e | 11387 | used_at = 1; |
c0ebe874 RS |
11388 | macro_build (&offset_expr, "lw", "t,o(b)", op[0], |
11389 | BFD_RELOC_LO16, AT); | |
11390 | if (op[0] != RA) | |
252b5132 RH |
11391 | { |
11392 | /* FIXME: How in the world do we deal with the possible | |
11393 | overflow here? */ | |
11394 | offset_expr.X_add_number += 4; | |
67c0d1eb | 11395 | macro_build (&offset_expr, "lw", "t,o(b)", |
c0ebe874 | 11396 | op[0] + 1, BFD_RELOC_LO16, AT); |
252b5132 RH |
11397 | } |
11398 | } | |
252b5132 RH |
11399 | break; |
11400 | ||
11401 | case M_LI_DD: | |
ca4e0257 RS |
11402 | /* Check if we have a constant in IMM_EXPR. If the FPRs are 64 bits |
11403 | wide, IMM_EXPR is the entire value and the GPRs are known to be 64 | |
11404 | bits wide as well. Otherwise IMM_EXPR is the high order 32 bits of | |
11405 | the value and the low order 32 bits are either zero or in | |
11406 | OFFSET_EXPR. */ | |
b0e6f033 | 11407 | if (imm_expr.X_op == O_constant) |
252b5132 | 11408 | { |
8fc2e39e | 11409 | used_at = 1; |
67c0d1eb | 11410 | load_register (AT, &imm_expr, HAVE_64BIT_FPRS); |
ca4e0257 RS |
11411 | if (HAVE_64BIT_FPRS) |
11412 | { | |
9c2799c2 | 11413 | gas_assert (HAVE_64BIT_GPRS); |
c0ebe874 | 11414 | macro_build (NULL, "dmtc1", "t,S", AT, op[0]); |
ca4e0257 | 11415 | } |
252b5132 RH |
11416 | else |
11417 | { | |
c0ebe874 | 11418 | macro_build (NULL, "mtc1", "t,G", AT, op[0] + 1); |
252b5132 | 11419 | if (offset_expr.X_op == O_absent) |
c0ebe874 | 11420 | macro_build (NULL, "mtc1", "t,G", 0, op[0]); |
252b5132 RH |
11421 | else |
11422 | { | |
9c2799c2 | 11423 | gas_assert (offset_expr.X_op == O_constant); |
67c0d1eb | 11424 | load_register (AT, &offset_expr, 0); |
c0ebe874 | 11425 | macro_build (NULL, "mtc1", "t,G", AT, op[0]); |
252b5132 RH |
11426 | } |
11427 | } | |
11428 | break; | |
11429 | } | |
11430 | ||
b0e6f033 RS |
11431 | gas_assert (imm_expr.X_op == O_absent |
11432 | && offset_expr.X_op == O_symbol | |
90ecf173 | 11433 | && offset_expr.X_add_number == 0); |
252b5132 RH |
11434 | s = segment_name (S_GET_SEGMENT (offset_expr.X_add_symbol)); |
11435 | if (strcmp (s, ".lit8") == 0) | |
f2ae14a1 | 11436 | { |
c0ebe874 | 11437 | op[2] = mips_gp_register; |
f2ae14a1 RS |
11438 | offset_reloc[0] = BFD_RELOC_MIPS_LITERAL; |
11439 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
11440 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
252b5132 RH |
11441 | } |
11442 | else | |
11443 | { | |
9c2799c2 | 11444 | gas_assert (strcmp (s, RDATA_SECTION_NAME) == 0); |
8fc2e39e | 11445 | used_at = 1; |
0a44bf69 | 11446 | if (mips_pic != NO_PIC) |
67c0d1eb RS |
11447 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT, |
11448 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
252b5132 RH |
11449 | else |
11450 | { | |
11451 | /* FIXME: This won't work for a 64 bit address. */ | |
67c0d1eb | 11452 | macro_build_lui (&offset_expr, AT); |
252b5132 | 11453 | } |
bdaaa2e1 | 11454 | |
c0ebe874 | 11455 | op[2] = AT; |
f2ae14a1 RS |
11456 | offset_reloc[0] = BFD_RELOC_LO16; |
11457 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
11458 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
11459 | } | |
11460 | align = 8; | |
11461 | /* Fall through */ | |
c4a68bea | 11462 | |
252b5132 RH |
11463 | case M_L_DAB: |
11464 | /* | |
11465 | * The MIPS assembler seems to check for X_add_number not | |
11466 | * being double aligned and generating: | |
11467 | * lui at,%hi(foo+1) | |
11468 | * addu at,at,v1 | |
11469 | * addiu at,at,%lo(foo+1) | |
11470 | * lwc1 f2,0(at) | |
11471 | * lwc1 f3,4(at) | |
11472 | * But, the resulting address is the same after relocation so why | |
11473 | * generate the extra instruction? | |
11474 | */ | |
bdaaa2e1 | 11475 | /* Itbl support may require additional care here. */ |
252b5132 | 11476 | coproc = 1; |
df58fc94 | 11477 | fmt = "T,o(b)"; |
0aa27725 | 11478 | if (CPU_HAS_LDC1_SDC1 (mips_opts.arch)) |
252b5132 RH |
11479 | { |
11480 | s = "ldc1"; | |
df58fc94 | 11481 | goto ld_st; |
252b5132 | 11482 | } |
252b5132 | 11483 | s = "lwc1"; |
252b5132 RH |
11484 | goto ldd_std; |
11485 | ||
11486 | case M_S_DAB: | |
df58fc94 RS |
11487 | gas_assert (!mips_opts.micromips); |
11488 | /* Itbl support may require additional care here. */ | |
11489 | coproc = 1; | |
11490 | fmt = "T,o(b)"; | |
0aa27725 | 11491 | if (CPU_HAS_LDC1_SDC1 (mips_opts.arch)) |
252b5132 RH |
11492 | { |
11493 | s = "sdc1"; | |
df58fc94 | 11494 | goto ld_st; |
252b5132 | 11495 | } |
252b5132 | 11496 | s = "swc1"; |
252b5132 RH |
11497 | goto ldd_std; |
11498 | ||
e407c74b NC |
11499 | case M_LQ_AB: |
11500 | fmt = "t,o(b)"; | |
11501 | s = "lq"; | |
11502 | goto ld; | |
11503 | ||
11504 | case M_SQ_AB: | |
11505 | fmt = "t,o(b)"; | |
11506 | s = "sq"; | |
11507 | goto ld_st; | |
11508 | ||
252b5132 | 11509 | case M_LD_AB: |
df58fc94 | 11510 | fmt = "t,o(b)"; |
ca4e0257 | 11511 | if (HAVE_64BIT_GPRS) |
252b5132 RH |
11512 | { |
11513 | s = "ld"; | |
11514 | goto ld; | |
11515 | } | |
252b5132 | 11516 | s = "lw"; |
252b5132 RH |
11517 | goto ldd_std; |
11518 | ||
11519 | case M_SD_AB: | |
df58fc94 | 11520 | fmt = "t,o(b)"; |
ca4e0257 | 11521 | if (HAVE_64BIT_GPRS) |
252b5132 RH |
11522 | { |
11523 | s = "sd"; | |
df58fc94 | 11524 | goto ld_st; |
252b5132 | 11525 | } |
252b5132 | 11526 | s = "sw"; |
252b5132 RH |
11527 | |
11528 | ldd_std: | |
f2ae14a1 RS |
11529 | /* Even on a big endian machine $fn comes before $fn+1. We have |
11530 | to adjust when loading from memory. We set coproc if we must | |
11531 | load $fn+1 first. */ | |
11532 | /* Itbl support may require additional care here. */ | |
11533 | if (!target_big_endian) | |
11534 | coproc = 0; | |
11535 | ||
c0ebe874 | 11536 | breg = op[2]; |
f2ae14a1 RS |
11537 | if (small_offset_p (0, align, 16)) |
11538 | { | |
11539 | ep = &offset_expr; | |
11540 | if (!small_offset_p (4, align, 16)) | |
11541 | { | |
11542 | macro_build (&offset_expr, ADDRESS_ADDI_INSN, "t,r,j", AT, breg, | |
11543 | -1, offset_reloc[0], offset_reloc[1], | |
11544 | offset_reloc[2]); | |
11545 | expr1.X_add_number = 0; | |
11546 | ep = &expr1; | |
11547 | breg = AT; | |
11548 | used_at = 1; | |
11549 | offset_reloc[0] = BFD_RELOC_LO16; | |
11550 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
11551 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
11552 | } | |
c0ebe874 | 11553 | if (strcmp (s, "lw") == 0 && op[0] == breg) |
f2ae14a1 RS |
11554 | { |
11555 | ep->X_add_number += 4; | |
c0ebe874 | 11556 | macro_build (ep, s, fmt, op[0] + 1, -1, offset_reloc[0], |
f2ae14a1 RS |
11557 | offset_reloc[1], offset_reloc[2], breg); |
11558 | ep->X_add_number -= 4; | |
c0ebe874 | 11559 | macro_build (ep, s, fmt, op[0], -1, offset_reloc[0], |
f2ae14a1 RS |
11560 | offset_reloc[1], offset_reloc[2], breg); |
11561 | } | |
11562 | else | |
11563 | { | |
c0ebe874 | 11564 | macro_build (ep, s, fmt, coproc ? op[0] + 1 : op[0], -1, |
f2ae14a1 RS |
11565 | offset_reloc[0], offset_reloc[1], offset_reloc[2], |
11566 | breg); | |
11567 | ep->X_add_number += 4; | |
c0ebe874 | 11568 | macro_build (ep, s, fmt, coproc ? op[0] : op[0] + 1, -1, |
f2ae14a1 RS |
11569 | offset_reloc[0], offset_reloc[1], offset_reloc[2], |
11570 | breg); | |
11571 | } | |
11572 | break; | |
11573 | } | |
11574 | ||
252b5132 RH |
11575 | if (offset_expr.X_op != O_symbol |
11576 | && offset_expr.X_op != O_constant) | |
11577 | { | |
1661c76c | 11578 | as_bad (_("expression too complex")); |
252b5132 RH |
11579 | offset_expr.X_op = O_constant; |
11580 | } | |
11581 | ||
2051e8c4 MR |
11582 | if (HAVE_32BIT_ADDRESSES |
11583 | && !IS_SEXT_32BIT_NUM (offset_expr.X_add_number)) | |
55e08f71 NC |
11584 | { |
11585 | char value [32]; | |
11586 | ||
11587 | sprintf_vma (value, offset_expr.X_add_number); | |
1661c76c | 11588 | as_bad (_("number (0x%s) larger than 32 bits"), value); |
55e08f71 | 11589 | } |
2051e8c4 | 11590 | |
90ecf173 | 11591 | if (mips_pic == NO_PIC || offset_expr.X_op == O_constant) |
252b5132 RH |
11592 | { |
11593 | /* If this is a reference to a GP relative symbol, we want | |
c0ebe874 RS |
11594 | <op> op[0],<sym>($gp) (BFD_RELOC_GPREL16) |
11595 | <op> op[0]+1,<sym>+4($gp) (BFD_RELOC_GPREL16) | |
252b5132 RH |
11596 | If we have a base register, we use this |
11597 | addu $at,$breg,$gp | |
c0ebe874 RS |
11598 | <op> op[0],<sym>($at) (BFD_RELOC_GPREL16) |
11599 | <op> op[0]+1,<sym>+4($at) (BFD_RELOC_GPREL16) | |
252b5132 RH |
11600 | If this is not a GP relative symbol, we want |
11601 | lui $at,<sym> (BFD_RELOC_HI16_S) | |
c0ebe874 RS |
11602 | <op> op[0],<sym>($at) (BFD_RELOC_LO16) |
11603 | <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16) | |
252b5132 RH |
11604 | If there is a base register, we add it to $at after the |
11605 | lui instruction. If there is a constant, we always use | |
11606 | the last case. */ | |
39a59cf8 MR |
11607 | if (offset_expr.X_op == O_symbol |
11608 | && (valueT) offset_expr.X_add_number <= MAX_GPREL_OFFSET | |
6caf9ef4 | 11609 | && !nopic_need_relax (offset_expr.X_add_symbol, 1)) |
252b5132 | 11610 | { |
4d7206a2 | 11611 | relax_start (offset_expr.X_add_symbol); |
252b5132 RH |
11612 | if (breg == 0) |
11613 | { | |
c9914766 | 11614 | tempreg = mips_gp_register; |
252b5132 RH |
11615 | } |
11616 | else | |
11617 | { | |
67c0d1eb | 11618 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", |
17a2f251 | 11619 | AT, breg, mips_gp_register); |
252b5132 | 11620 | tempreg = AT; |
252b5132 RH |
11621 | used_at = 1; |
11622 | } | |
11623 | ||
beae10d5 | 11624 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11625 | macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0], |
17a2f251 | 11626 | BFD_RELOC_GPREL16, tempreg); |
252b5132 RH |
11627 | offset_expr.X_add_number += 4; |
11628 | ||
11629 | /* Set mips_optimize to 2 to avoid inserting an | |
11630 | undesired nop. */ | |
11631 | hold_mips_optimize = mips_optimize; | |
11632 | mips_optimize = 2; | |
beae10d5 | 11633 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11634 | macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1, |
17a2f251 | 11635 | BFD_RELOC_GPREL16, tempreg); |
252b5132 RH |
11636 | mips_optimize = hold_mips_optimize; |
11637 | ||
4d7206a2 | 11638 | relax_switch (); |
252b5132 | 11639 | |
0970e49e | 11640 | offset_expr.X_add_number -= 4; |
252b5132 | 11641 | } |
8fc2e39e | 11642 | used_at = 1; |
f2ae14a1 RS |
11643 | if (offset_high_part (offset_expr.X_add_number, 16) |
11644 | != offset_high_part (offset_expr.X_add_number + 4, 16)) | |
11645 | { | |
11646 | load_address (AT, &offset_expr, &used_at); | |
11647 | offset_expr.X_op = O_constant; | |
11648 | offset_expr.X_add_number = 0; | |
11649 | } | |
11650 | else | |
11651 | macro_build_lui (&offset_expr, AT); | |
252b5132 | 11652 | if (breg != 0) |
67c0d1eb | 11653 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT); |
beae10d5 | 11654 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11655 | macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0], |
17a2f251 | 11656 | BFD_RELOC_LO16, AT); |
252b5132 RH |
11657 | /* FIXME: How do we handle overflow here? */ |
11658 | offset_expr.X_add_number += 4; | |
beae10d5 | 11659 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11660 | macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1, |
17a2f251 | 11661 | BFD_RELOC_LO16, AT); |
4d7206a2 RS |
11662 | if (mips_relax.sequence) |
11663 | relax_end (); | |
bdaaa2e1 | 11664 | } |
0a44bf69 | 11665 | else if (!mips_big_got) |
252b5132 | 11666 | { |
252b5132 RH |
11667 | /* If this is a reference to an external symbol, we want |
11668 | lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11669 | nop | |
c0ebe874 RS |
11670 | <op> op[0],0($at) |
11671 | <op> op[0]+1,4($at) | |
252b5132 RH |
11672 | Otherwise we want |
11673 | lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11674 | nop | |
c0ebe874 RS |
11675 | <op> op[0],<sym>($at) (BFD_RELOC_LO16) |
11676 | <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16) | |
252b5132 RH |
11677 | If there is a base register we add it to $at before the |
11678 | lwc1 instructions. If there is a constant we include it | |
11679 | in the lwc1 instructions. */ | |
11680 | used_at = 1; | |
11681 | expr1.X_add_number = offset_expr.X_add_number; | |
252b5132 RH |
11682 | if (expr1.X_add_number < -0x8000 |
11683 | || expr1.X_add_number >= 0x8000 - 4) | |
11684 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
67c0d1eb | 11685 | load_got_offset (AT, &offset_expr); |
269137b2 | 11686 | load_delay_nop (); |
252b5132 | 11687 | if (breg != 0) |
67c0d1eb | 11688 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT); |
252b5132 RH |
11689 | |
11690 | /* Set mips_optimize to 2 to avoid inserting an undesired | |
11691 | nop. */ | |
11692 | hold_mips_optimize = mips_optimize; | |
11693 | mips_optimize = 2; | |
4d7206a2 | 11694 | |
beae10d5 | 11695 | /* Itbl support may require additional care here. */ |
4d7206a2 | 11696 | relax_start (offset_expr.X_add_symbol); |
c0ebe874 | 11697 | macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0], |
67c0d1eb | 11698 | BFD_RELOC_LO16, AT); |
4d7206a2 | 11699 | expr1.X_add_number += 4; |
c0ebe874 | 11700 | macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1, |
67c0d1eb | 11701 | BFD_RELOC_LO16, AT); |
4d7206a2 | 11702 | relax_switch (); |
c0ebe874 | 11703 | macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0], |
67c0d1eb | 11704 | BFD_RELOC_LO16, AT); |
4d7206a2 | 11705 | offset_expr.X_add_number += 4; |
c0ebe874 | 11706 | macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1, |
67c0d1eb | 11707 | BFD_RELOC_LO16, AT); |
4d7206a2 | 11708 | relax_end (); |
252b5132 | 11709 | |
4d7206a2 | 11710 | mips_optimize = hold_mips_optimize; |
252b5132 | 11711 | } |
0a44bf69 | 11712 | else if (mips_big_got) |
252b5132 | 11713 | { |
67c0d1eb | 11714 | int gpdelay; |
252b5132 RH |
11715 | |
11716 | /* If this is a reference to an external symbol, we want | |
11717 | lui $at,<sym> (BFD_RELOC_MIPS_GOT_HI16) | |
11718 | addu $at,$at,$gp | |
11719 | lw $at,<sym>($at) (BFD_RELOC_MIPS_GOT_LO16) | |
11720 | nop | |
c0ebe874 RS |
11721 | <op> op[0],0($at) |
11722 | <op> op[0]+1,4($at) | |
252b5132 RH |
11723 | Otherwise we want |
11724 | lw $at,<sym>($gp) (BFD_RELOC_MIPS_GOT16) | |
11725 | nop | |
c0ebe874 RS |
11726 | <op> op[0],<sym>($at) (BFD_RELOC_LO16) |
11727 | <op> op[0]+1,<sym>+4($at) (BFD_RELOC_LO16) | |
252b5132 RH |
11728 | If there is a base register we add it to $at before the |
11729 | lwc1 instructions. If there is a constant we include it | |
11730 | in the lwc1 instructions. */ | |
11731 | used_at = 1; | |
11732 | expr1.X_add_number = offset_expr.X_add_number; | |
11733 | offset_expr.X_add_number = 0; | |
11734 | if (expr1.X_add_number < -0x8000 | |
11735 | || expr1.X_add_number >= 0x8000 - 4) | |
11736 | as_bad (_("PIC code offset overflow (max 16 signed bits)")); | |
67c0d1eb | 11737 | gpdelay = reg_needs_delay (mips_gp_register); |
4d7206a2 | 11738 | relax_start (offset_expr.X_add_symbol); |
df58fc94 | 11739 | macro_build (&offset_expr, "lui", LUI_FMT, |
67c0d1eb RS |
11740 | AT, BFD_RELOC_MIPS_GOT_HI16); |
11741 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
17a2f251 | 11742 | AT, AT, mips_gp_register); |
67c0d1eb | 11743 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", |
17a2f251 | 11744 | AT, BFD_RELOC_MIPS_GOT_LO16, AT); |
269137b2 | 11745 | load_delay_nop (); |
252b5132 | 11746 | if (breg != 0) |
67c0d1eb | 11747 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT); |
beae10d5 | 11748 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11749 | macro_build (&expr1, s, fmt, coproc ? op[0] + 1 : op[0], |
17a2f251 | 11750 | BFD_RELOC_LO16, AT); |
252b5132 RH |
11751 | expr1.X_add_number += 4; |
11752 | ||
11753 | /* Set mips_optimize to 2 to avoid inserting an undesired | |
11754 | nop. */ | |
11755 | hold_mips_optimize = mips_optimize; | |
11756 | mips_optimize = 2; | |
beae10d5 | 11757 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11758 | macro_build (&expr1, s, fmt, coproc ? op[0] : op[0] + 1, |
17a2f251 | 11759 | BFD_RELOC_LO16, AT); |
252b5132 RH |
11760 | mips_optimize = hold_mips_optimize; |
11761 | expr1.X_add_number -= 4; | |
11762 | ||
4d7206a2 RS |
11763 | relax_switch (); |
11764 | offset_expr.X_add_number = expr1.X_add_number; | |
67c0d1eb RS |
11765 | if (gpdelay) |
11766 | macro_build (NULL, "nop", ""); | |
11767 | macro_build (&offset_expr, ADDRESS_LOAD_INSN, "t,o(b)", AT, | |
11768 | BFD_RELOC_MIPS_GOT16, mips_gp_register); | |
269137b2 | 11769 | load_delay_nop (); |
252b5132 | 11770 | if (breg != 0) |
67c0d1eb | 11771 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", AT, breg, AT); |
beae10d5 | 11772 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11773 | macro_build (&offset_expr, s, fmt, coproc ? op[0] + 1 : op[0], |
67c0d1eb | 11774 | BFD_RELOC_LO16, AT); |
4d7206a2 | 11775 | offset_expr.X_add_number += 4; |
252b5132 RH |
11776 | |
11777 | /* Set mips_optimize to 2 to avoid inserting an undesired | |
11778 | nop. */ | |
11779 | hold_mips_optimize = mips_optimize; | |
11780 | mips_optimize = 2; | |
beae10d5 | 11781 | /* Itbl support may require additional care here. */ |
c0ebe874 | 11782 | macro_build (&offset_expr, s, fmt, coproc ? op[0] : op[0] + 1, |
67c0d1eb | 11783 | BFD_RELOC_LO16, AT); |
252b5132 | 11784 | mips_optimize = hold_mips_optimize; |
4d7206a2 | 11785 | relax_end (); |
252b5132 | 11786 | } |
252b5132 RH |
11787 | else |
11788 | abort (); | |
11789 | ||
252b5132 | 11790 | break; |
dd6a37e7 AP |
11791 | |
11792 | case M_SAA_AB: | |
dd6a37e7 | 11793 | s = "saa"; |
7f3c4072 | 11794 | offbits = 0; |
dd6a37e7 AP |
11795 | fmt = "t,(b)"; |
11796 | goto ld_st; | |
11797 | case M_SAAD_AB: | |
dd6a37e7 | 11798 | s = "saad"; |
7f3c4072 | 11799 | offbits = 0; |
dd6a37e7 AP |
11800 | fmt = "t,(b)"; |
11801 | goto ld_st; | |
11802 | ||
252b5132 RH |
11803 | /* New code added to support COPZ instructions. |
11804 | This code builds table entries out of the macros in mip_opcodes. | |
11805 | R4000 uses interlocks to handle coproc delays. | |
11806 | Other chips (like the R3000) require nops to be inserted for delays. | |
11807 | ||
f72c8c98 | 11808 | FIXME: Currently, we require that the user handle delays. |
252b5132 RH |
11809 | In order to fill delay slots for non-interlocked chips, |
11810 | we must have a way to specify delays based on the coprocessor. | |
11811 | Eg. 4 cycles if load coproc reg from memory, 1 if in cache, etc. | |
11812 | What are the side-effects of the cop instruction? | |
11813 | What cache support might we have and what are its effects? | |
11814 | Both coprocessor & memory require delays. how long??? | |
bdaaa2e1 | 11815 | What registers are read/set/modified? |
252b5132 RH |
11816 | |
11817 | If an itbl is provided to interpret cop instructions, | |
bdaaa2e1 | 11818 | this knowledge can be encoded in the itbl spec. */ |
252b5132 RH |
11819 | |
11820 | case M_COP0: | |
11821 | s = "c0"; | |
11822 | goto copz; | |
11823 | case M_COP1: | |
11824 | s = "c1"; | |
11825 | goto copz; | |
11826 | case M_COP2: | |
11827 | s = "c2"; | |
11828 | goto copz; | |
11829 | case M_COP3: | |
11830 | s = "c3"; | |
11831 | copz: | |
df58fc94 | 11832 | gas_assert (!mips_opts.micromips); |
252b5132 RH |
11833 | /* For now we just do C (same as Cz). The parameter will be |
11834 | stored in insn_opcode by mips_ip. */ | |
c8276761 | 11835 | macro_build (NULL, s, "C", (int) ip->insn_opcode); |
8fc2e39e | 11836 | break; |
252b5132 | 11837 | |
ea1fb5dc | 11838 | case M_MOVE: |
c0ebe874 | 11839 | move_register (op[0], op[1]); |
8fc2e39e | 11840 | break; |
ea1fb5dc | 11841 | |
833794fc MR |
11842 | case M_MOVEP: |
11843 | gas_assert (mips_opts.micromips); | |
11844 | gas_assert (mips_opts.insn32); | |
c0ebe874 RS |
11845 | move_register (micromips_to_32_reg_h_map1[op[0]], |
11846 | micromips_to_32_reg_m_map[op[1]]); | |
11847 | move_register (micromips_to_32_reg_h_map2[op[0]], | |
11848 | micromips_to_32_reg_n_map[op[2]]); | |
833794fc MR |
11849 | break; |
11850 | ||
252b5132 RH |
11851 | case M_DMUL: |
11852 | dbl = 1; | |
11853 | case M_MUL: | |
e407c74b | 11854 | if (mips_opts.arch == CPU_R5900) |
c0ebe874 RS |
11855 | macro_build (NULL, dbl ? "dmultu" : "multu", "d,s,t", op[0], op[1], |
11856 | op[2]); | |
e407c74b NC |
11857 | else |
11858 | { | |
c0ebe874 RS |
11859 | macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", op[1], op[2]); |
11860 | macro_build (NULL, "mflo", MFHL_FMT, op[0]); | |
e407c74b | 11861 | } |
8fc2e39e | 11862 | break; |
252b5132 RH |
11863 | |
11864 | case M_DMUL_I: | |
11865 | dbl = 1; | |
11866 | case M_MUL_I: | |
11867 | /* The MIPS assembler some times generates shifts and adds. I'm | |
11868 | not trying to be that fancy. GCC should do this for us | |
11869 | anyway. */ | |
8fc2e39e | 11870 | used_at = 1; |
67c0d1eb | 11871 | load_register (AT, &imm_expr, dbl); |
c0ebe874 RS |
11872 | macro_build (NULL, dbl ? "dmult" : "mult", "s,t", op[1], AT); |
11873 | macro_build (NULL, "mflo", MFHL_FMT, op[0]); | |
252b5132 RH |
11874 | break; |
11875 | ||
11876 | case M_DMULO_I: | |
11877 | dbl = 1; | |
11878 | case M_MULO_I: | |
11879 | imm = 1; | |
11880 | goto do_mulo; | |
11881 | ||
11882 | case M_DMULO: | |
11883 | dbl = 1; | |
11884 | case M_MULO: | |
11885 | do_mulo: | |
7d10b47d | 11886 | start_noreorder (); |
8fc2e39e | 11887 | used_at = 1; |
252b5132 | 11888 | if (imm) |
67c0d1eb | 11889 | load_register (AT, &imm_expr, dbl); |
c0ebe874 RS |
11890 | macro_build (NULL, dbl ? "dmult" : "mult", "s,t", |
11891 | op[1], imm ? AT : op[2]); | |
11892 | macro_build (NULL, "mflo", MFHL_FMT, op[0]); | |
11893 | macro_build (NULL, dbl ? "dsra32" : "sra", SHFT_FMT, op[0], op[0], 31); | |
df58fc94 | 11894 | macro_build (NULL, "mfhi", MFHL_FMT, AT); |
252b5132 | 11895 | if (mips_trap) |
c0ebe874 | 11896 | macro_build (NULL, "tne", TRAP_FMT, op[0], AT, 6); |
252b5132 RH |
11897 | else |
11898 | { | |
df58fc94 RS |
11899 | if (mips_opts.micromips) |
11900 | micromips_label_expr (&label_expr); | |
11901 | else | |
11902 | label_expr.X_add_number = 8; | |
c0ebe874 | 11903 | macro_build (&label_expr, "beq", "s,t,p", op[0], AT); |
a605d2b3 | 11904 | macro_build (NULL, "nop", ""); |
df58fc94 RS |
11905 | macro_build (NULL, "break", BRK_FMT, 6); |
11906 | if (mips_opts.micromips) | |
11907 | micromips_add_label (); | |
252b5132 | 11908 | } |
7d10b47d | 11909 | end_noreorder (); |
c0ebe874 | 11910 | macro_build (NULL, "mflo", MFHL_FMT, op[0]); |
252b5132 RH |
11911 | break; |
11912 | ||
11913 | case M_DMULOU_I: | |
11914 | dbl = 1; | |
11915 | case M_MULOU_I: | |
11916 | imm = 1; | |
11917 | goto do_mulou; | |
11918 | ||
11919 | case M_DMULOU: | |
11920 | dbl = 1; | |
11921 | case M_MULOU: | |
11922 | do_mulou: | |
7d10b47d | 11923 | start_noreorder (); |
8fc2e39e | 11924 | used_at = 1; |
252b5132 | 11925 | if (imm) |
67c0d1eb RS |
11926 | load_register (AT, &imm_expr, dbl); |
11927 | macro_build (NULL, dbl ? "dmultu" : "multu", "s,t", | |
c0ebe874 | 11928 | op[1], imm ? AT : op[2]); |
df58fc94 | 11929 | macro_build (NULL, "mfhi", MFHL_FMT, AT); |
c0ebe874 | 11930 | macro_build (NULL, "mflo", MFHL_FMT, op[0]); |
252b5132 | 11931 | if (mips_trap) |
df58fc94 | 11932 | macro_build (NULL, "tne", TRAP_FMT, AT, ZERO, 6); |
252b5132 RH |
11933 | else |
11934 | { | |
df58fc94 RS |
11935 | if (mips_opts.micromips) |
11936 | micromips_label_expr (&label_expr); | |
11937 | else | |
11938 | label_expr.X_add_number = 8; | |
11939 | macro_build (&label_expr, "beq", "s,t,p", AT, ZERO); | |
a605d2b3 | 11940 | macro_build (NULL, "nop", ""); |
df58fc94 RS |
11941 | macro_build (NULL, "break", BRK_FMT, 6); |
11942 | if (mips_opts.micromips) | |
11943 | micromips_add_label (); | |
252b5132 | 11944 | } |
7d10b47d | 11945 | end_noreorder (); |
252b5132 RH |
11946 | break; |
11947 | ||
771c7ce4 | 11948 | case M_DROL: |
fef14a42 | 11949 | if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch)) |
82dd0097 | 11950 | { |
c0ebe874 | 11951 | if (op[0] == op[1]) |
82dd0097 CD |
11952 | { |
11953 | tempreg = AT; | |
11954 | used_at = 1; | |
11955 | } | |
11956 | else | |
c0ebe874 RS |
11957 | tempreg = op[0]; |
11958 | macro_build (NULL, "dnegu", "d,w", tempreg, op[2]); | |
11959 | macro_build (NULL, "drorv", "d,t,s", op[0], op[1], tempreg); | |
8fc2e39e | 11960 | break; |
82dd0097 | 11961 | } |
8fc2e39e | 11962 | used_at = 1; |
c0ebe874 RS |
11963 | macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]); |
11964 | macro_build (NULL, "dsrlv", "d,t,s", AT, op[1], AT); | |
11965 | macro_build (NULL, "dsllv", "d,t,s", op[0], op[1], op[2]); | |
11966 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
771c7ce4 TS |
11967 | break; |
11968 | ||
252b5132 | 11969 | case M_ROL: |
fef14a42 | 11970 | if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch)) |
82dd0097 | 11971 | { |
c0ebe874 | 11972 | if (op[0] == op[1]) |
82dd0097 CD |
11973 | { |
11974 | tempreg = AT; | |
11975 | used_at = 1; | |
11976 | } | |
11977 | else | |
c0ebe874 RS |
11978 | tempreg = op[0]; |
11979 | macro_build (NULL, "negu", "d,w", tempreg, op[2]); | |
11980 | macro_build (NULL, "rorv", "d,t,s", op[0], op[1], tempreg); | |
8fc2e39e | 11981 | break; |
82dd0097 | 11982 | } |
8fc2e39e | 11983 | used_at = 1; |
c0ebe874 RS |
11984 | macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]); |
11985 | macro_build (NULL, "srlv", "d,t,s", AT, op[1], AT); | |
11986 | macro_build (NULL, "sllv", "d,t,s", op[0], op[1], op[2]); | |
11987 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
252b5132 RH |
11988 | break; |
11989 | ||
771c7ce4 TS |
11990 | case M_DROL_I: |
11991 | { | |
11992 | unsigned int rot; | |
91d6fa6a NC |
11993 | char *l; |
11994 | char *rr; | |
771c7ce4 | 11995 | |
771c7ce4 | 11996 | rot = imm_expr.X_add_number & 0x3f; |
fef14a42 | 11997 | if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch)) |
60b63b72 RS |
11998 | { |
11999 | rot = (64 - rot) & 0x3f; | |
12000 | if (rot >= 32) | |
c0ebe874 | 12001 | macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32); |
60b63b72 | 12002 | else |
c0ebe874 | 12003 | macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot); |
8fc2e39e | 12004 | break; |
60b63b72 | 12005 | } |
483fc7cd | 12006 | if (rot == 0) |
483fc7cd | 12007 | { |
c0ebe874 | 12008 | macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0); |
8fc2e39e | 12009 | break; |
483fc7cd | 12010 | } |
82dd0097 | 12011 | l = (rot < 0x20) ? "dsll" : "dsll32"; |
91d6fa6a | 12012 | rr = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32"; |
82dd0097 | 12013 | rot &= 0x1f; |
8fc2e39e | 12014 | used_at = 1; |
c0ebe874 RS |
12015 | macro_build (NULL, l, SHFT_FMT, AT, op[1], rot); |
12016 | macro_build (NULL, rr, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f); | |
12017 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
771c7ce4 TS |
12018 | } |
12019 | break; | |
12020 | ||
252b5132 | 12021 | case M_ROL_I: |
771c7ce4 TS |
12022 | { |
12023 | unsigned int rot; | |
12024 | ||
771c7ce4 | 12025 | rot = imm_expr.X_add_number & 0x1f; |
fef14a42 | 12026 | if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch)) |
60b63b72 | 12027 | { |
c0ebe874 RS |
12028 | macro_build (NULL, "ror", SHFT_FMT, op[0], op[1], |
12029 | (32 - rot) & 0x1f); | |
8fc2e39e | 12030 | break; |
60b63b72 | 12031 | } |
483fc7cd | 12032 | if (rot == 0) |
483fc7cd | 12033 | { |
c0ebe874 | 12034 | macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0); |
8fc2e39e | 12035 | break; |
483fc7cd | 12036 | } |
8fc2e39e | 12037 | used_at = 1; |
c0ebe874 RS |
12038 | macro_build (NULL, "sll", SHFT_FMT, AT, op[1], rot); |
12039 | macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f); | |
12040 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
771c7ce4 TS |
12041 | } |
12042 | break; | |
12043 | ||
12044 | case M_DROR: | |
fef14a42 | 12045 | if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch)) |
82dd0097 | 12046 | { |
c0ebe874 | 12047 | macro_build (NULL, "drorv", "d,t,s", op[0], op[1], op[2]); |
8fc2e39e | 12048 | break; |
82dd0097 | 12049 | } |
8fc2e39e | 12050 | used_at = 1; |
c0ebe874 RS |
12051 | macro_build (NULL, "dsubu", "d,v,t", AT, ZERO, op[2]); |
12052 | macro_build (NULL, "dsllv", "d,t,s", AT, op[1], AT); | |
12053 | macro_build (NULL, "dsrlv", "d,t,s", op[0], op[1], op[2]); | |
12054 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
252b5132 RH |
12055 | break; |
12056 | ||
12057 | case M_ROR: | |
fef14a42 | 12058 | if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch)) |
82dd0097 | 12059 | { |
c0ebe874 | 12060 | macro_build (NULL, "rorv", "d,t,s", op[0], op[1], op[2]); |
8fc2e39e | 12061 | break; |
82dd0097 | 12062 | } |
8fc2e39e | 12063 | used_at = 1; |
c0ebe874 RS |
12064 | macro_build (NULL, "subu", "d,v,t", AT, ZERO, op[2]); |
12065 | macro_build (NULL, "sllv", "d,t,s", AT, op[1], AT); | |
12066 | macro_build (NULL, "srlv", "d,t,s", op[0], op[1], op[2]); | |
12067 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
252b5132 RH |
12068 | break; |
12069 | ||
771c7ce4 TS |
12070 | case M_DROR_I: |
12071 | { | |
12072 | unsigned int rot; | |
91d6fa6a NC |
12073 | char *l; |
12074 | char *rr; | |
771c7ce4 | 12075 | |
771c7ce4 | 12076 | rot = imm_expr.X_add_number & 0x3f; |
fef14a42 | 12077 | if (ISA_HAS_DROR (mips_opts.isa) || CPU_HAS_DROR (mips_opts.arch)) |
82dd0097 CD |
12078 | { |
12079 | if (rot >= 32) | |
c0ebe874 | 12080 | macro_build (NULL, "dror32", SHFT_FMT, op[0], op[1], rot - 32); |
82dd0097 | 12081 | else |
c0ebe874 | 12082 | macro_build (NULL, "dror", SHFT_FMT, op[0], op[1], rot); |
8fc2e39e | 12083 | break; |
82dd0097 | 12084 | } |
483fc7cd | 12085 | if (rot == 0) |
483fc7cd | 12086 | { |
c0ebe874 | 12087 | macro_build (NULL, "dsrl", SHFT_FMT, op[0], op[1], 0); |
8fc2e39e | 12088 | break; |
483fc7cd | 12089 | } |
91d6fa6a | 12090 | rr = (rot < 0x20) ? "dsrl" : "dsrl32"; |
82dd0097 CD |
12091 | l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32"; |
12092 | rot &= 0x1f; | |
8fc2e39e | 12093 | used_at = 1; |
c0ebe874 RS |
12094 | macro_build (NULL, rr, SHFT_FMT, AT, op[1], rot); |
12095 | macro_build (NULL, l, SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f); | |
12096 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
771c7ce4 TS |
12097 | } |
12098 | break; | |
12099 | ||
252b5132 | 12100 | case M_ROR_I: |
771c7ce4 TS |
12101 | { |
12102 | unsigned int rot; | |
12103 | ||
771c7ce4 | 12104 | rot = imm_expr.X_add_number & 0x1f; |
fef14a42 | 12105 | if (ISA_HAS_ROR (mips_opts.isa) || CPU_HAS_ROR (mips_opts.arch)) |
82dd0097 | 12106 | { |
c0ebe874 | 12107 | macro_build (NULL, "ror", SHFT_FMT, op[0], op[1], rot); |
8fc2e39e | 12108 | break; |
82dd0097 | 12109 | } |
483fc7cd | 12110 | if (rot == 0) |
483fc7cd | 12111 | { |
c0ebe874 | 12112 | macro_build (NULL, "srl", SHFT_FMT, op[0], op[1], 0); |
8fc2e39e | 12113 | break; |
483fc7cd | 12114 | } |
8fc2e39e | 12115 | used_at = 1; |
c0ebe874 RS |
12116 | macro_build (NULL, "srl", SHFT_FMT, AT, op[1], rot); |
12117 | macro_build (NULL, "sll", SHFT_FMT, op[0], op[1], (0x20 - rot) & 0x1f); | |
12118 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); | |
771c7ce4 | 12119 | } |
252b5132 RH |
12120 | break; |
12121 | ||
252b5132 | 12122 | case M_SEQ: |
c0ebe874 RS |
12123 | if (op[1] == 0) |
12124 | macro_build (&expr1, "sltiu", "t,r,j", op[0], op[2], BFD_RELOC_LO16); | |
12125 | else if (op[2] == 0) | |
12126 | macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16); | |
252b5132 RH |
12127 | else |
12128 | { | |
c0ebe874 RS |
12129 | macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]); |
12130 | macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16); | |
252b5132 | 12131 | } |
8fc2e39e | 12132 | break; |
252b5132 RH |
12133 | |
12134 | case M_SEQ_I: | |
b0e6f033 | 12135 | if (imm_expr.X_add_number == 0) |
252b5132 | 12136 | { |
c0ebe874 | 12137 | macro_build (&expr1, "sltiu", "t,r,j", op[0], op[1], BFD_RELOC_LO16); |
8fc2e39e | 12138 | break; |
252b5132 | 12139 | } |
c0ebe874 | 12140 | if (op[1] == 0) |
252b5132 | 12141 | { |
1661c76c | 12142 | as_warn (_("instruction %s: result is always false"), |
252b5132 | 12143 | ip->insn_mo->name); |
c0ebe874 | 12144 | move_register (op[0], 0); |
8fc2e39e | 12145 | break; |
252b5132 | 12146 | } |
dd3cbb7e NC |
12147 | if (CPU_HAS_SEQ (mips_opts.arch) |
12148 | && -512 <= imm_expr.X_add_number | |
12149 | && imm_expr.X_add_number < 512) | |
12150 | { | |
c0ebe874 | 12151 | macro_build (NULL, "seqi", "t,r,+Q", op[0], op[1], |
750bdd57 | 12152 | (int) imm_expr.X_add_number); |
dd3cbb7e NC |
12153 | break; |
12154 | } | |
b0e6f033 | 12155 | if (imm_expr.X_add_number >= 0 |
252b5132 | 12156 | && imm_expr.X_add_number < 0x10000) |
c0ebe874 | 12157 | macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1], BFD_RELOC_LO16); |
b0e6f033 | 12158 | else if (imm_expr.X_add_number > -0x8000 |
252b5132 RH |
12159 | && imm_expr.X_add_number < 0) |
12160 | { | |
12161 | imm_expr.X_add_number = -imm_expr.X_add_number; | |
67c0d1eb | 12162 | macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu", |
c0ebe874 | 12163 | "t,r,j", op[0], op[1], BFD_RELOC_LO16); |
252b5132 | 12164 | } |
dd3cbb7e NC |
12165 | else if (CPU_HAS_SEQ (mips_opts.arch)) |
12166 | { | |
12167 | used_at = 1; | |
12168 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); | |
c0ebe874 | 12169 | macro_build (NULL, "seq", "d,v,t", op[0], op[1], AT); |
dd3cbb7e NC |
12170 | break; |
12171 | } | |
252b5132 RH |
12172 | else |
12173 | { | |
67c0d1eb | 12174 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12175 | macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT); |
252b5132 RH |
12176 | used_at = 1; |
12177 | } | |
c0ebe874 | 12178 | macro_build (&expr1, "sltiu", "t,r,j", op[0], op[0], BFD_RELOC_LO16); |
8fc2e39e | 12179 | break; |
252b5132 | 12180 | |
c0ebe874 | 12181 | case M_SGE: /* X >= Y <==> not (X < Y) */ |
252b5132 RH |
12182 | s = "slt"; |
12183 | goto sge; | |
12184 | case M_SGEU: | |
12185 | s = "sltu"; | |
12186 | sge: | |
c0ebe874 RS |
12187 | macro_build (NULL, s, "d,v,t", op[0], op[1], op[2]); |
12188 | macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16); | |
8fc2e39e | 12189 | break; |
252b5132 | 12190 | |
c0ebe874 | 12191 | case M_SGE_I: /* X >= I <==> not (X < I) */ |
252b5132 | 12192 | case M_SGEU_I: |
b0e6f033 | 12193 | if (imm_expr.X_add_number >= -0x8000 |
252b5132 | 12194 | && imm_expr.X_add_number < 0x8000) |
c0ebe874 RS |
12195 | macro_build (&imm_expr, mask == M_SGE_I ? "slti" : "sltiu", "t,r,j", |
12196 | op[0], op[1], BFD_RELOC_LO16); | |
252b5132 RH |
12197 | else |
12198 | { | |
67c0d1eb RS |
12199 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
12200 | macro_build (NULL, mask == M_SGE_I ? "slt" : "sltu", "d,v,t", | |
c0ebe874 | 12201 | op[0], op[1], AT); |
252b5132 RH |
12202 | used_at = 1; |
12203 | } | |
c0ebe874 | 12204 | macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16); |
8fc2e39e | 12205 | break; |
252b5132 | 12206 | |
c0ebe874 | 12207 | case M_SGT: /* X > Y <==> Y < X */ |
252b5132 RH |
12208 | s = "slt"; |
12209 | goto sgt; | |
12210 | case M_SGTU: | |
12211 | s = "sltu"; | |
12212 | sgt: | |
c0ebe874 | 12213 | macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]); |
8fc2e39e | 12214 | break; |
252b5132 | 12215 | |
c0ebe874 | 12216 | case M_SGT_I: /* X > I <==> I < X */ |
252b5132 RH |
12217 | s = "slt"; |
12218 | goto sgti; | |
12219 | case M_SGTU_I: | |
12220 | s = "sltu"; | |
12221 | sgti: | |
8fc2e39e | 12222 | used_at = 1; |
67c0d1eb | 12223 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12224 | macro_build (NULL, s, "d,v,t", op[0], AT, op[1]); |
252b5132 RH |
12225 | break; |
12226 | ||
c0ebe874 | 12227 | case M_SLE: /* X <= Y <==> Y >= X <==> not (Y < X) */ |
252b5132 RH |
12228 | s = "slt"; |
12229 | goto sle; | |
12230 | case M_SLEU: | |
12231 | s = "sltu"; | |
12232 | sle: | |
c0ebe874 RS |
12233 | macro_build (NULL, s, "d,v,t", op[0], op[2], op[1]); |
12234 | macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16); | |
8fc2e39e | 12235 | break; |
252b5132 | 12236 | |
c0ebe874 | 12237 | case M_SLE_I: /* X <= I <==> I >= X <==> not (I < X) */ |
252b5132 RH |
12238 | s = "slt"; |
12239 | goto slei; | |
12240 | case M_SLEU_I: | |
12241 | s = "sltu"; | |
12242 | slei: | |
8fc2e39e | 12243 | used_at = 1; |
67c0d1eb | 12244 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 RS |
12245 | macro_build (NULL, s, "d,v,t", op[0], AT, op[1]); |
12246 | macro_build (&expr1, "xori", "t,r,i", op[0], op[0], BFD_RELOC_LO16); | |
252b5132 RH |
12247 | break; |
12248 | ||
12249 | case M_SLT_I: | |
b0e6f033 | 12250 | if (imm_expr.X_add_number >= -0x8000 |
252b5132 RH |
12251 | && imm_expr.X_add_number < 0x8000) |
12252 | { | |
c0ebe874 RS |
12253 | macro_build (&imm_expr, "slti", "t,r,j", op[0], op[1], |
12254 | BFD_RELOC_LO16); | |
8fc2e39e | 12255 | break; |
252b5132 | 12256 | } |
8fc2e39e | 12257 | used_at = 1; |
67c0d1eb | 12258 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12259 | macro_build (NULL, "slt", "d,v,t", op[0], op[1], AT); |
252b5132 RH |
12260 | break; |
12261 | ||
12262 | case M_SLTU_I: | |
b0e6f033 | 12263 | if (imm_expr.X_add_number >= -0x8000 |
252b5132 RH |
12264 | && imm_expr.X_add_number < 0x8000) |
12265 | { | |
c0ebe874 | 12266 | macro_build (&imm_expr, "sltiu", "t,r,j", op[0], op[1], |
17a2f251 | 12267 | BFD_RELOC_LO16); |
8fc2e39e | 12268 | break; |
252b5132 | 12269 | } |
8fc2e39e | 12270 | used_at = 1; |
67c0d1eb | 12271 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12272 | macro_build (NULL, "sltu", "d,v,t", op[0], op[1], AT); |
252b5132 RH |
12273 | break; |
12274 | ||
12275 | case M_SNE: | |
c0ebe874 RS |
12276 | if (op[1] == 0) |
12277 | macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[2]); | |
12278 | else if (op[2] == 0) | |
12279 | macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]); | |
252b5132 RH |
12280 | else |
12281 | { | |
c0ebe874 RS |
12282 | macro_build (NULL, "xor", "d,v,t", op[0], op[1], op[2]); |
12283 | macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]); | |
252b5132 | 12284 | } |
8fc2e39e | 12285 | break; |
252b5132 RH |
12286 | |
12287 | case M_SNE_I: | |
b0e6f033 | 12288 | if (imm_expr.X_add_number == 0) |
252b5132 | 12289 | { |
c0ebe874 | 12290 | macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[1]); |
8fc2e39e | 12291 | break; |
252b5132 | 12292 | } |
c0ebe874 | 12293 | if (op[1] == 0) |
252b5132 | 12294 | { |
1661c76c | 12295 | as_warn (_("instruction %s: result is always true"), |
252b5132 | 12296 | ip->insn_mo->name); |
67c0d1eb | 12297 | macro_build (&expr1, HAVE_32BIT_GPRS ? "addiu" : "daddiu", "t,r,j", |
c0ebe874 | 12298 | op[0], 0, BFD_RELOC_LO16); |
8fc2e39e | 12299 | break; |
252b5132 | 12300 | } |
dd3cbb7e NC |
12301 | if (CPU_HAS_SEQ (mips_opts.arch) |
12302 | && -512 <= imm_expr.X_add_number | |
12303 | && imm_expr.X_add_number < 512) | |
12304 | { | |
c0ebe874 | 12305 | macro_build (NULL, "snei", "t,r,+Q", op[0], op[1], |
750bdd57 | 12306 | (int) imm_expr.X_add_number); |
dd3cbb7e NC |
12307 | break; |
12308 | } | |
b0e6f033 | 12309 | if (imm_expr.X_add_number >= 0 |
252b5132 RH |
12310 | && imm_expr.X_add_number < 0x10000) |
12311 | { | |
c0ebe874 RS |
12312 | macro_build (&imm_expr, "xori", "t,r,i", op[0], op[1], |
12313 | BFD_RELOC_LO16); | |
252b5132 | 12314 | } |
b0e6f033 | 12315 | else if (imm_expr.X_add_number > -0x8000 |
252b5132 RH |
12316 | && imm_expr.X_add_number < 0) |
12317 | { | |
12318 | imm_expr.X_add_number = -imm_expr.X_add_number; | |
67c0d1eb | 12319 | macro_build (&imm_expr, HAVE_32BIT_GPRS ? "addiu" : "daddiu", |
c0ebe874 | 12320 | "t,r,j", op[0], op[1], BFD_RELOC_LO16); |
252b5132 | 12321 | } |
dd3cbb7e NC |
12322 | else if (CPU_HAS_SEQ (mips_opts.arch)) |
12323 | { | |
12324 | used_at = 1; | |
12325 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); | |
c0ebe874 | 12326 | macro_build (NULL, "sne", "d,v,t", op[0], op[1], AT); |
dd3cbb7e NC |
12327 | break; |
12328 | } | |
252b5132 RH |
12329 | else |
12330 | { | |
67c0d1eb | 12331 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12332 | macro_build (NULL, "xor", "d,v,t", op[0], op[1], AT); |
252b5132 RH |
12333 | used_at = 1; |
12334 | } | |
c0ebe874 | 12335 | macro_build (NULL, "sltu", "d,v,t", op[0], 0, op[0]); |
8fc2e39e | 12336 | break; |
252b5132 | 12337 | |
df58fc94 RS |
12338 | case M_SUB_I: |
12339 | s = "addi"; | |
12340 | s2 = "sub"; | |
12341 | goto do_subi; | |
12342 | case M_SUBU_I: | |
12343 | s = "addiu"; | |
12344 | s2 = "subu"; | |
12345 | goto do_subi; | |
252b5132 RH |
12346 | case M_DSUB_I: |
12347 | dbl = 1; | |
df58fc94 RS |
12348 | s = "daddi"; |
12349 | s2 = "dsub"; | |
12350 | if (!mips_opts.micromips) | |
12351 | goto do_subi; | |
b0e6f033 | 12352 | if (imm_expr.X_add_number > -0x200 |
df58fc94 | 12353 | && imm_expr.X_add_number <= 0x200) |
252b5132 | 12354 | { |
b0e6f033 RS |
12355 | macro_build (NULL, s, "t,r,.", op[0], op[1], |
12356 | (int) -imm_expr.X_add_number); | |
8fc2e39e | 12357 | break; |
252b5132 | 12358 | } |
df58fc94 | 12359 | goto do_subi_i; |
252b5132 RH |
12360 | case M_DSUBU_I: |
12361 | dbl = 1; | |
df58fc94 RS |
12362 | s = "daddiu"; |
12363 | s2 = "dsubu"; | |
12364 | do_subi: | |
b0e6f033 | 12365 | if (imm_expr.X_add_number > -0x8000 |
252b5132 RH |
12366 | && imm_expr.X_add_number <= 0x8000) |
12367 | { | |
12368 | imm_expr.X_add_number = -imm_expr.X_add_number; | |
c0ebe874 | 12369 | macro_build (&imm_expr, s, "t,r,j", op[0], op[1], BFD_RELOC_LO16); |
8fc2e39e | 12370 | break; |
252b5132 | 12371 | } |
df58fc94 | 12372 | do_subi_i: |
8fc2e39e | 12373 | used_at = 1; |
67c0d1eb | 12374 | load_register (AT, &imm_expr, dbl); |
c0ebe874 | 12375 | macro_build (NULL, s2, "d,v,t", op[0], op[1], AT); |
252b5132 RH |
12376 | break; |
12377 | ||
12378 | case M_TEQ_I: | |
12379 | s = "teq"; | |
12380 | goto trap; | |
12381 | case M_TGE_I: | |
12382 | s = "tge"; | |
12383 | goto trap; | |
12384 | case M_TGEU_I: | |
12385 | s = "tgeu"; | |
12386 | goto trap; | |
12387 | case M_TLT_I: | |
12388 | s = "tlt"; | |
12389 | goto trap; | |
12390 | case M_TLTU_I: | |
12391 | s = "tltu"; | |
12392 | goto trap; | |
12393 | case M_TNE_I: | |
12394 | s = "tne"; | |
12395 | trap: | |
8fc2e39e | 12396 | used_at = 1; |
67c0d1eb | 12397 | load_register (AT, &imm_expr, HAVE_64BIT_GPRS); |
c0ebe874 | 12398 | macro_build (NULL, s, "s,t", op[0], AT); |
252b5132 RH |
12399 | break; |
12400 | ||
252b5132 | 12401 | case M_TRUNCWS: |
43841e91 | 12402 | case M_TRUNCWD: |
df58fc94 | 12403 | gas_assert (!mips_opts.micromips); |
0aa27725 | 12404 | gas_assert (mips_opts.isa == ISA_MIPS1); |
8fc2e39e | 12405 | used_at = 1; |
252b5132 RH |
12406 | |
12407 | /* | |
12408 | * Is the double cfc1 instruction a bug in the mips assembler; | |
12409 | * or is there a reason for it? | |
12410 | */ | |
7d10b47d | 12411 | start_noreorder (); |
c0ebe874 RS |
12412 | macro_build (NULL, "cfc1", "t,G", op[2], RA); |
12413 | macro_build (NULL, "cfc1", "t,G", op[2], RA); | |
67c0d1eb | 12414 | macro_build (NULL, "nop", ""); |
252b5132 | 12415 | expr1.X_add_number = 3; |
c0ebe874 | 12416 | macro_build (&expr1, "ori", "t,r,i", AT, op[2], BFD_RELOC_LO16); |
252b5132 | 12417 | expr1.X_add_number = 2; |
67c0d1eb RS |
12418 | macro_build (&expr1, "xori", "t,r,i", AT, AT, BFD_RELOC_LO16); |
12419 | macro_build (NULL, "ctc1", "t,G", AT, RA); | |
12420 | macro_build (NULL, "nop", ""); | |
12421 | macro_build (NULL, mask == M_TRUNCWD ? "cvt.w.d" : "cvt.w.s", "D,S", | |
c0ebe874 RS |
12422 | op[0], op[1]); |
12423 | macro_build (NULL, "ctc1", "t,G", op[2], RA); | |
67c0d1eb | 12424 | macro_build (NULL, "nop", ""); |
7d10b47d | 12425 | end_noreorder (); |
252b5132 RH |
12426 | break; |
12427 | ||
f2ae14a1 | 12428 | case M_ULH_AB: |
252b5132 | 12429 | s = "lb"; |
df58fc94 RS |
12430 | s2 = "lbu"; |
12431 | off = 1; | |
12432 | goto uld_st; | |
f2ae14a1 | 12433 | case M_ULHU_AB: |
252b5132 | 12434 | s = "lbu"; |
df58fc94 RS |
12435 | s2 = "lbu"; |
12436 | off = 1; | |
12437 | goto uld_st; | |
f2ae14a1 | 12438 | case M_ULW_AB: |
df58fc94 RS |
12439 | s = "lwl"; |
12440 | s2 = "lwr"; | |
7f3c4072 | 12441 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 RS |
12442 | off = 3; |
12443 | goto uld_st; | |
f2ae14a1 | 12444 | case M_ULD_AB: |
252b5132 RH |
12445 | s = "ldl"; |
12446 | s2 = "ldr"; | |
7f3c4072 | 12447 | offbits = (mips_opts.micromips ? 12 : 16); |
252b5132 | 12448 | off = 7; |
df58fc94 | 12449 | goto uld_st; |
f2ae14a1 | 12450 | case M_USH_AB: |
df58fc94 RS |
12451 | s = "sb"; |
12452 | s2 = "sb"; | |
12453 | off = 1; | |
12454 | ust = 1; | |
12455 | goto uld_st; | |
f2ae14a1 | 12456 | case M_USW_AB: |
df58fc94 RS |
12457 | s = "swl"; |
12458 | s2 = "swr"; | |
7f3c4072 | 12459 | offbits = (mips_opts.micromips ? 12 : 16); |
252b5132 | 12460 | off = 3; |
df58fc94 RS |
12461 | ust = 1; |
12462 | goto uld_st; | |
f2ae14a1 | 12463 | case M_USD_AB: |
df58fc94 RS |
12464 | s = "sdl"; |
12465 | s2 = "sdr"; | |
7f3c4072 | 12466 | offbits = (mips_opts.micromips ? 12 : 16); |
df58fc94 RS |
12467 | off = 7; |
12468 | ust = 1; | |
12469 | ||
12470 | uld_st: | |
c0ebe874 | 12471 | breg = op[2]; |
f2ae14a1 | 12472 | large_offset = !small_offset_p (off, align, offbits); |
df58fc94 RS |
12473 | ep = &offset_expr; |
12474 | expr1.X_add_number = 0; | |
f2ae14a1 | 12475 | if (large_offset) |
df58fc94 RS |
12476 | { |
12477 | used_at = 1; | |
12478 | tempreg = AT; | |
f2ae14a1 RS |
12479 | if (small_offset_p (0, align, 16)) |
12480 | macro_build (ep, ADDRESS_ADDI_INSN, "t,r,j", tempreg, breg, -1, | |
12481 | offset_reloc[0], offset_reloc[1], offset_reloc[2]); | |
12482 | else | |
12483 | { | |
12484 | load_address (tempreg, ep, &used_at); | |
12485 | if (breg != 0) | |
12486 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", | |
12487 | tempreg, tempreg, breg); | |
12488 | } | |
12489 | offset_reloc[0] = BFD_RELOC_LO16; | |
12490 | offset_reloc[1] = BFD_RELOC_UNUSED; | |
12491 | offset_reloc[2] = BFD_RELOC_UNUSED; | |
df58fc94 | 12492 | breg = tempreg; |
c0ebe874 | 12493 | tempreg = op[0]; |
df58fc94 RS |
12494 | ep = &expr1; |
12495 | } | |
c0ebe874 | 12496 | else if (!ust && op[0] == breg) |
8fc2e39e TS |
12497 | { |
12498 | used_at = 1; | |
12499 | tempreg = AT; | |
12500 | } | |
252b5132 | 12501 | else |
c0ebe874 | 12502 | tempreg = op[0]; |
af22f5b2 | 12503 | |
df58fc94 RS |
12504 | if (off == 1) |
12505 | goto ulh_sh; | |
252b5132 | 12506 | |
90ecf173 | 12507 | if (!target_big_endian) |
df58fc94 | 12508 | ep->X_add_number += off; |
f2ae14a1 | 12509 | if (offbits == 12) |
c8276761 | 12510 | macro_build (NULL, s, "t,~(b)", tempreg, (int) ep->X_add_number, breg); |
f2ae14a1 RS |
12511 | else |
12512 | macro_build (ep, s, "t,o(b)", tempreg, -1, | |
12513 | offset_reloc[0], offset_reloc[1], offset_reloc[2], breg); | |
df58fc94 | 12514 | |
90ecf173 | 12515 | if (!target_big_endian) |
df58fc94 | 12516 | ep->X_add_number -= off; |
252b5132 | 12517 | else |
df58fc94 | 12518 | ep->X_add_number += off; |
f2ae14a1 | 12519 | if (offbits == 12) |
df58fc94 | 12520 | macro_build (NULL, s2, "t,~(b)", |
c8276761 | 12521 | tempreg, (int) ep->X_add_number, breg); |
f2ae14a1 RS |
12522 | else |
12523 | macro_build (ep, s2, "t,o(b)", tempreg, -1, | |
12524 | offset_reloc[0], offset_reloc[1], offset_reloc[2], breg); | |
252b5132 | 12525 | |
df58fc94 | 12526 | /* If necessary, move the result in tempreg to the final destination. */ |
c0ebe874 | 12527 | if (!ust && op[0] != tempreg) |
df58fc94 RS |
12528 | { |
12529 | /* Protect second load's delay slot. */ | |
12530 | load_delay_nop (); | |
c0ebe874 | 12531 | move_register (op[0], tempreg); |
df58fc94 | 12532 | } |
8fc2e39e | 12533 | break; |
252b5132 | 12534 | |
df58fc94 | 12535 | ulh_sh: |
d6bc6245 | 12536 | used_at = 1; |
df58fc94 RS |
12537 | if (target_big_endian == ust) |
12538 | ep->X_add_number += off; | |
c0ebe874 | 12539 | tempreg = ust || large_offset ? op[0] : AT; |
f2ae14a1 RS |
12540 | macro_build (ep, s, "t,o(b)", tempreg, -1, |
12541 | offset_reloc[0], offset_reloc[1], offset_reloc[2], breg); | |
df58fc94 RS |
12542 | |
12543 | /* For halfword transfers we need a temporary register to shuffle | |
12544 | bytes. Unfortunately for M_USH_A we have none available before | |
12545 | the next store as AT holds the base address. We deal with this | |
12546 | case by clobbering TREG and then restoring it as with ULH. */ | |
c0ebe874 | 12547 | tempreg = ust == large_offset ? op[0] : AT; |
df58fc94 | 12548 | if (ust) |
c0ebe874 | 12549 | macro_build (NULL, "srl", SHFT_FMT, tempreg, op[0], 8); |
df58fc94 RS |
12550 | |
12551 | if (target_big_endian == ust) | |
12552 | ep->X_add_number -= off; | |
252b5132 | 12553 | else |
df58fc94 | 12554 | ep->X_add_number += off; |
f2ae14a1 RS |
12555 | macro_build (ep, s2, "t,o(b)", tempreg, -1, |
12556 | offset_reloc[0], offset_reloc[1], offset_reloc[2], breg); | |
252b5132 | 12557 | |
df58fc94 | 12558 | /* For M_USH_A re-retrieve the LSB. */ |
f2ae14a1 | 12559 | if (ust && large_offset) |
df58fc94 RS |
12560 | { |
12561 | if (target_big_endian) | |
12562 | ep->X_add_number += off; | |
12563 | else | |
12564 | ep->X_add_number -= off; | |
f2ae14a1 RS |
12565 | macro_build (&expr1, "lbu", "t,o(b)", AT, -1, |
12566 | offset_reloc[0], offset_reloc[1], offset_reloc[2], AT); | |
df58fc94 RS |
12567 | } |
12568 | /* For ULH and M_USH_A OR the LSB in. */ | |
f2ae14a1 | 12569 | if (!ust || large_offset) |
df58fc94 | 12570 | { |
c0ebe874 | 12571 | tempreg = !large_offset ? AT : op[0]; |
df58fc94 | 12572 | macro_build (NULL, "sll", SHFT_FMT, tempreg, tempreg, 8); |
c0ebe874 | 12573 | macro_build (NULL, "or", "d,v,t", op[0], op[0], AT); |
df58fc94 | 12574 | } |
252b5132 RH |
12575 | break; |
12576 | ||
12577 | default: | |
12578 | /* FIXME: Check if this is one of the itbl macros, since they | |
bdaaa2e1 | 12579 | are added dynamically. */ |
1661c76c | 12580 | as_bad (_("macro %s not implemented yet"), ip->insn_mo->name); |
252b5132 RH |
12581 | break; |
12582 | } | |
741fe287 | 12583 | if (!mips_opts.at && used_at) |
1661c76c | 12584 | as_bad (_("macro used $at after \".set noat\"")); |
252b5132 RH |
12585 | } |
12586 | ||
12587 | /* Implement macros in mips16 mode. */ | |
12588 | ||
12589 | static void | |
17a2f251 | 12590 | mips16_macro (struct mips_cl_insn *ip) |
252b5132 | 12591 | { |
c0ebe874 | 12592 | const struct mips_operand_array *operands; |
252b5132 | 12593 | int mask; |
c0ebe874 | 12594 | int tmp; |
252b5132 RH |
12595 | expressionS expr1; |
12596 | int dbl; | |
12597 | const char *s, *s2, *s3; | |
c0ebe874 RS |
12598 | unsigned int op[MAX_OPERANDS]; |
12599 | unsigned int i; | |
252b5132 RH |
12600 | |
12601 | mask = ip->insn_mo->mask; | |
12602 | ||
c0ebe874 RS |
12603 | operands = insn_operands (ip); |
12604 | for (i = 0; i < MAX_OPERANDS; i++) | |
12605 | if (operands->operand[i]) | |
12606 | op[i] = insn_extract_operand (ip, operands->operand[i]); | |
12607 | else | |
12608 | op[i] = -1; | |
252b5132 | 12609 | |
252b5132 RH |
12610 | expr1.X_op = O_constant; |
12611 | expr1.X_op_symbol = NULL; | |
12612 | expr1.X_add_symbol = NULL; | |
12613 | expr1.X_add_number = 1; | |
12614 | ||
12615 | dbl = 0; | |
12616 | ||
12617 | switch (mask) | |
12618 | { | |
12619 | default: | |
b37df7c4 | 12620 | abort (); |
252b5132 RH |
12621 | |
12622 | case M_DDIV_3: | |
12623 | dbl = 1; | |
12624 | case M_DIV_3: | |
12625 | s = "mflo"; | |
12626 | goto do_div3; | |
12627 | case M_DREM_3: | |
12628 | dbl = 1; | |
12629 | case M_REM_3: | |
12630 | s = "mfhi"; | |
12631 | do_div3: | |
7d10b47d | 12632 | start_noreorder (); |
c0ebe874 | 12633 | macro_build (NULL, dbl ? "ddiv" : "div", "0,x,y", op[1], op[2]); |
252b5132 | 12634 | expr1.X_add_number = 2; |
c0ebe874 | 12635 | macro_build (&expr1, "bnez", "x,p", op[2]); |
67c0d1eb | 12636 | macro_build (NULL, "break", "6", 7); |
bdaaa2e1 | 12637 | |
252b5132 RH |
12638 | /* FIXME: The normal code checks for of -1 / -0x80000000 here, |
12639 | since that causes an overflow. We should do that as well, | |
12640 | but I don't see how to do the comparisons without a temporary | |
12641 | register. */ | |
7d10b47d | 12642 | end_noreorder (); |
c0ebe874 | 12643 | macro_build (NULL, s, "x", op[0]); |
252b5132 RH |
12644 | break; |
12645 | ||
12646 | case M_DIVU_3: | |
12647 | s = "divu"; | |
12648 | s2 = "mflo"; | |
12649 | goto do_divu3; | |
12650 | case M_REMU_3: | |
12651 | s = "divu"; | |
12652 | s2 = "mfhi"; | |
12653 | goto do_divu3; | |
12654 | case M_DDIVU_3: | |
12655 | s = "ddivu"; | |
12656 | s2 = "mflo"; | |
12657 | goto do_divu3; | |
12658 | case M_DREMU_3: | |
12659 | s = "ddivu"; | |
12660 | s2 = "mfhi"; | |
12661 | do_divu3: | |
7d10b47d | 12662 | start_noreorder (); |
c0ebe874 | 12663 | macro_build (NULL, s, "0,x,y", op[1], op[2]); |
252b5132 | 12664 | expr1.X_add_number = 2; |
c0ebe874 | 12665 | macro_build (&expr1, "bnez", "x,p", op[2]); |
67c0d1eb | 12666 | macro_build (NULL, "break", "6", 7); |
7d10b47d | 12667 | end_noreorder (); |
c0ebe874 | 12668 | macro_build (NULL, s2, "x", op[0]); |
252b5132 RH |
12669 | break; |
12670 | ||
12671 | case M_DMUL: | |
12672 | dbl = 1; | |
12673 | case M_MUL: | |
c0ebe874 RS |
12674 | macro_build (NULL, dbl ? "dmultu" : "multu", "x,y", op[1], op[2]); |
12675 | macro_build (NULL, "mflo", "x", op[0]); | |
8fc2e39e | 12676 | break; |
252b5132 RH |
12677 | |
12678 | case M_DSUBU_I: | |
12679 | dbl = 1; | |
12680 | goto do_subu; | |
12681 | case M_SUBU_I: | |
12682 | do_subu: | |
252b5132 | 12683 | imm_expr.X_add_number = -imm_expr.X_add_number; |
c0ebe874 | 12684 | macro_build (&imm_expr, dbl ? "daddiu" : "addiu", "y,x,4", op[0], op[1]); |
252b5132 RH |
12685 | break; |
12686 | ||
12687 | case M_SUBU_I_2: | |
252b5132 | 12688 | imm_expr.X_add_number = -imm_expr.X_add_number; |
c0ebe874 | 12689 | macro_build (&imm_expr, "addiu", "x,k", op[0]); |
252b5132 RH |
12690 | break; |
12691 | ||
12692 | case M_DSUBU_I_2: | |
252b5132 | 12693 | imm_expr.X_add_number = -imm_expr.X_add_number; |
c0ebe874 | 12694 | macro_build (&imm_expr, "daddiu", "y,j", op[0]); |
252b5132 RH |
12695 | break; |
12696 | ||
12697 | case M_BEQ: | |
12698 | s = "cmp"; | |
12699 | s2 = "bteqz"; | |
12700 | goto do_branch; | |
12701 | case M_BNE: | |
12702 | s = "cmp"; | |
12703 | s2 = "btnez"; | |
12704 | goto do_branch; | |
12705 | case M_BLT: | |
12706 | s = "slt"; | |
12707 | s2 = "btnez"; | |
12708 | goto do_branch; | |
12709 | case M_BLTU: | |
12710 | s = "sltu"; | |
12711 | s2 = "btnez"; | |
12712 | goto do_branch; | |
12713 | case M_BLE: | |
12714 | s = "slt"; | |
12715 | s2 = "bteqz"; | |
12716 | goto do_reverse_branch; | |
12717 | case M_BLEU: | |
12718 | s = "sltu"; | |
12719 | s2 = "bteqz"; | |
12720 | goto do_reverse_branch; | |
12721 | case M_BGE: | |
12722 | s = "slt"; | |
12723 | s2 = "bteqz"; | |
12724 | goto do_branch; | |
12725 | case M_BGEU: | |
12726 | s = "sltu"; | |
12727 | s2 = "bteqz"; | |
12728 | goto do_branch; | |
12729 | case M_BGT: | |
12730 | s = "slt"; | |
12731 | s2 = "btnez"; | |
12732 | goto do_reverse_branch; | |
12733 | case M_BGTU: | |
12734 | s = "sltu"; | |
12735 | s2 = "btnez"; | |
12736 | ||
12737 | do_reverse_branch: | |
c0ebe874 RS |
12738 | tmp = op[1]; |
12739 | op[1] = op[0]; | |
12740 | op[0] = tmp; | |
252b5132 RH |
12741 | |
12742 | do_branch: | |
c0ebe874 | 12743 | macro_build (NULL, s, "x,y", op[0], op[1]); |
67c0d1eb | 12744 | macro_build (&offset_expr, s2, "p"); |
252b5132 RH |
12745 | break; |
12746 | ||
12747 | case M_BEQ_I: | |
12748 | s = "cmpi"; | |
12749 | s2 = "bteqz"; | |
12750 | s3 = "x,U"; | |
12751 | goto do_branch_i; | |
12752 | case M_BNE_I: | |
12753 | s = "cmpi"; | |
12754 | s2 = "btnez"; | |
12755 | s3 = "x,U"; | |
12756 | goto do_branch_i; | |
12757 | case M_BLT_I: | |
12758 | s = "slti"; | |
12759 | s2 = "btnez"; | |
12760 | s3 = "x,8"; | |
12761 | goto do_branch_i; | |
12762 | case M_BLTU_I: | |
12763 | s = "sltiu"; | |
12764 | s2 = "btnez"; | |
12765 | s3 = "x,8"; | |
12766 | goto do_branch_i; | |
12767 | case M_BLE_I: | |
12768 | s = "slti"; | |
12769 | s2 = "btnez"; | |
12770 | s3 = "x,8"; | |
12771 | goto do_addone_branch_i; | |
12772 | case M_BLEU_I: | |
12773 | s = "sltiu"; | |
12774 | s2 = "btnez"; | |
12775 | s3 = "x,8"; | |
12776 | goto do_addone_branch_i; | |
12777 | case M_BGE_I: | |
12778 | s = "slti"; | |
12779 | s2 = "bteqz"; | |
12780 | s3 = "x,8"; | |
12781 | goto do_branch_i; | |
12782 | case M_BGEU_I: | |
12783 | s = "sltiu"; | |
12784 | s2 = "bteqz"; | |
12785 | s3 = "x,8"; | |
12786 | goto do_branch_i; | |
12787 | case M_BGT_I: | |
12788 | s = "slti"; | |
12789 | s2 = "bteqz"; | |
12790 | s3 = "x,8"; | |
12791 | goto do_addone_branch_i; | |
12792 | case M_BGTU_I: | |
12793 | s = "sltiu"; | |
12794 | s2 = "bteqz"; | |
12795 | s3 = "x,8"; | |
12796 | ||
12797 | do_addone_branch_i: | |
252b5132 RH |
12798 | ++imm_expr.X_add_number; |
12799 | ||
12800 | do_branch_i: | |
c0ebe874 | 12801 | macro_build (&imm_expr, s, s3, op[0]); |
67c0d1eb | 12802 | macro_build (&offset_expr, s2, "p"); |
252b5132 RH |
12803 | break; |
12804 | ||
12805 | case M_ABS: | |
12806 | expr1.X_add_number = 0; | |
c0ebe874 RS |
12807 | macro_build (&expr1, "slti", "x,8", op[1]); |
12808 | if (op[0] != op[1]) | |
12809 | macro_build (NULL, "move", "y,X", op[0], mips16_to_32_reg_map[op[1]]); | |
252b5132 | 12810 | expr1.X_add_number = 2; |
67c0d1eb | 12811 | macro_build (&expr1, "bteqz", "p"); |
c0ebe874 | 12812 | macro_build (NULL, "neg", "x,w", op[0], op[0]); |
0acfaea6 | 12813 | break; |
252b5132 RH |
12814 | } |
12815 | } | |
12816 | ||
14daeee3 RS |
12817 | /* Look up instruction [START, START + LENGTH) in HASH. Record any extra |
12818 | opcode bits in *OPCODE_EXTRA. */ | |
12819 | ||
12820 | static struct mips_opcode * | |
12821 | mips_lookup_insn (struct hash_control *hash, const char *start, | |
da8bca91 | 12822 | ssize_t length, unsigned int *opcode_extra) |
14daeee3 RS |
12823 | { |
12824 | char *name, *dot, *p; | |
12825 | unsigned int mask, suffix; | |
da8bca91 | 12826 | ssize_t opend; |
14daeee3 RS |
12827 | struct mips_opcode *insn; |
12828 | ||
12829 | /* Make a copy of the instruction so that we can fiddle with it. */ | |
12830 | name = alloca (length + 1); | |
12831 | memcpy (name, start, length); | |
12832 | name[length] = '\0'; | |
12833 | ||
12834 | /* Look up the instruction as-is. */ | |
12835 | insn = (struct mips_opcode *) hash_find (hash, name); | |
ee5734f0 | 12836 | if (insn) |
14daeee3 RS |
12837 | return insn; |
12838 | ||
12839 | dot = strchr (name, '.'); | |
12840 | if (dot && dot[1]) | |
12841 | { | |
12842 | /* Try to interpret the text after the dot as a VU0 channel suffix. */ | |
12843 | p = mips_parse_vu0_channels (dot + 1, &mask); | |
12844 | if (*p == 0 && mask != 0) | |
12845 | { | |
12846 | *dot = 0; | |
12847 | insn = (struct mips_opcode *) hash_find (hash, name); | |
12848 | *dot = '.'; | |
12849 | if (insn && (insn->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) != 0) | |
12850 | { | |
12851 | *opcode_extra |= mask << mips_vu0_channel_mask.lsb; | |
12852 | return insn; | |
12853 | } | |
12854 | } | |
12855 | } | |
12856 | ||
12857 | if (mips_opts.micromips) | |
12858 | { | |
12859 | /* See if there's an instruction size override suffix, | |
12860 | either `16' or `32', at the end of the mnemonic proper, | |
12861 | that defines the operation, i.e. before the first `.' | |
12862 | character if any. Strip it and retry. */ | |
12863 | opend = dot != NULL ? dot - name : length; | |
12864 | if (opend >= 3 && name[opend - 2] == '1' && name[opend - 1] == '6') | |
12865 | suffix = 2; | |
12866 | else if (name[opend - 2] == '3' && name[opend - 1] == '2') | |
12867 | suffix = 4; | |
12868 | else | |
12869 | suffix = 0; | |
12870 | if (suffix) | |
12871 | { | |
12872 | memcpy (name + opend - 2, name + opend, length - opend + 1); | |
12873 | insn = (struct mips_opcode *) hash_find (hash, name); | |
ee5734f0 | 12874 | if (insn) |
14daeee3 RS |
12875 | { |
12876 | forced_insn_length = suffix; | |
12877 | return insn; | |
12878 | } | |
12879 | } | |
12880 | } | |
12881 | ||
12882 | return NULL; | |
12883 | } | |
12884 | ||
77bd4346 | 12885 | /* Assemble an instruction into its binary format. If the instruction |
e423441d RS |
12886 | is a macro, set imm_expr and offset_expr to the values associated |
12887 | with "I" and "A" operands respectively. Otherwise store the value | |
12888 | of the relocatable field (if any) in offset_expr. In both cases | |
12889 | set offset_reloc to the relocation operators applied to offset_expr. */ | |
252b5132 RH |
12890 | |
12891 | static void | |
60f20e8b | 12892 | mips_ip (char *str, struct mips_cl_insn *insn) |
252b5132 | 12893 | { |
60f20e8b | 12894 | const struct mips_opcode *first, *past; |
df58fc94 | 12895 | struct hash_control *hash; |
a92713e6 | 12896 | char format; |
14daeee3 | 12897 | size_t end; |
a92713e6 | 12898 | struct mips_operand_token *tokens; |
14daeee3 | 12899 | unsigned int opcode_extra; |
252b5132 | 12900 | |
df58fc94 RS |
12901 | if (mips_opts.micromips) |
12902 | { | |
12903 | hash = micromips_op_hash; | |
12904 | past = µmips_opcodes[bfd_micromips_num_opcodes]; | |
12905 | } | |
12906 | else | |
12907 | { | |
12908 | hash = op_hash; | |
12909 | past = &mips_opcodes[NUMOPCODES]; | |
12910 | } | |
12911 | forced_insn_length = 0; | |
14daeee3 | 12912 | opcode_extra = 0; |
252b5132 | 12913 | |
df58fc94 | 12914 | /* We first try to match an instruction up to a space or to the end. */ |
a40bc9dd RS |
12915 | for (end = 0; str[end] != '\0' && !ISSPACE (str[end]); end++) |
12916 | continue; | |
bdaaa2e1 | 12917 | |
60f20e8b RS |
12918 | first = mips_lookup_insn (hash, str, end, &opcode_extra); |
12919 | if (first == NULL) | |
252b5132 | 12920 | { |
1661c76c | 12921 | set_insn_error (0, _("unrecognized opcode")); |
a40bc9dd | 12922 | return; |
252b5132 RH |
12923 | } |
12924 | ||
60f20e8b | 12925 | if (strcmp (first->name, "li.s") == 0) |
a92713e6 | 12926 | format = 'f'; |
60f20e8b | 12927 | else if (strcmp (first->name, "li.d") == 0) |
a92713e6 RS |
12928 | format = 'd'; |
12929 | else | |
12930 | format = 0; | |
12931 | tokens = mips_parse_arguments (str + end, format); | |
12932 | if (!tokens) | |
12933 | return; | |
12934 | ||
60f20e8b RS |
12935 | if (!match_insns (insn, first, past, tokens, opcode_extra, FALSE) |
12936 | && !match_insns (insn, first, past, tokens, opcode_extra, TRUE)) | |
1661c76c | 12937 | set_insn_error (0, _("invalid operands")); |
df58fc94 | 12938 | |
e3de51ce | 12939 | obstack_free (&mips_operand_tokens, tokens); |
252b5132 RH |
12940 | } |
12941 | ||
77bd4346 RS |
12942 | /* As for mips_ip, but used when assembling MIPS16 code. |
12943 | Also set forced_insn_length to the resulting instruction size in | |
12944 | bytes if the user explicitly requested a small or extended instruction. */ | |
252b5132 RH |
12945 | |
12946 | static void | |
60f20e8b | 12947 | mips16_ip (char *str, struct mips_cl_insn *insn) |
252b5132 | 12948 | { |
1a00e612 | 12949 | char *end, *s, c; |
60f20e8b | 12950 | struct mips_opcode *first; |
a92713e6 | 12951 | struct mips_operand_token *tokens; |
252b5132 | 12952 | |
df58fc94 | 12953 | forced_insn_length = 0; |
252b5132 | 12954 | |
3882b010 | 12955 | for (s = str; ISLOWER (*s); ++s) |
252b5132 | 12956 | ; |
1a00e612 RS |
12957 | end = s; |
12958 | c = *end; | |
12959 | switch (c) | |
252b5132 RH |
12960 | { |
12961 | case '\0': | |
12962 | break; | |
12963 | ||
12964 | case ' ': | |
1a00e612 | 12965 | s++; |
252b5132 RH |
12966 | break; |
12967 | ||
12968 | case '.': | |
12969 | if (s[1] == 't' && s[2] == ' ') | |
12970 | { | |
df58fc94 | 12971 | forced_insn_length = 2; |
252b5132 RH |
12972 | s += 3; |
12973 | break; | |
12974 | } | |
12975 | else if (s[1] == 'e' && s[2] == ' ') | |
12976 | { | |
df58fc94 | 12977 | forced_insn_length = 4; |
252b5132 RH |
12978 | s += 3; |
12979 | break; | |
12980 | } | |
12981 | /* Fall through. */ | |
12982 | default: | |
1661c76c | 12983 | set_insn_error (0, _("unrecognized opcode")); |
252b5132 RH |
12984 | return; |
12985 | } | |
12986 | ||
df58fc94 RS |
12987 | if (mips_opts.noautoextend && !forced_insn_length) |
12988 | forced_insn_length = 2; | |
252b5132 | 12989 | |
1a00e612 | 12990 | *end = 0; |
60f20e8b | 12991 | first = (struct mips_opcode *) hash_find (mips16_op_hash, str); |
1a00e612 RS |
12992 | *end = c; |
12993 | ||
60f20e8b | 12994 | if (!first) |
252b5132 | 12995 | { |
1661c76c | 12996 | set_insn_error (0, _("unrecognized opcode")); |
252b5132 RH |
12997 | return; |
12998 | } | |
12999 | ||
a92713e6 RS |
13000 | tokens = mips_parse_arguments (s, 0); |
13001 | if (!tokens) | |
13002 | return; | |
13003 | ||
60f20e8b | 13004 | if (!match_mips16_insns (insn, first, tokens)) |
1661c76c | 13005 | set_insn_error (0, _("invalid operands")); |
252b5132 | 13006 | |
e3de51ce | 13007 | obstack_free (&mips_operand_tokens, tokens); |
252b5132 RH |
13008 | } |
13009 | ||
b886a2ab RS |
13010 | /* Marshal immediate value VAL for an extended MIPS16 instruction. |
13011 | NBITS is the number of significant bits in VAL. */ | |
13012 | ||
13013 | static unsigned long | |
13014 | mips16_immed_extend (offsetT val, unsigned int nbits) | |
13015 | { | |
13016 | int extval; | |
13017 | if (nbits == 16) | |
13018 | { | |
13019 | extval = ((val >> 11) & 0x1f) | (val & 0x7e0); | |
13020 | val &= 0x1f; | |
13021 | } | |
13022 | else if (nbits == 15) | |
13023 | { | |
13024 | extval = ((val >> 11) & 0xf) | (val & 0x7f0); | |
13025 | val &= 0xf; | |
13026 | } | |
13027 | else | |
13028 | { | |
13029 | extval = ((val & 0x1f) << 6) | (val & 0x20); | |
13030 | val = 0; | |
13031 | } | |
13032 | return (extval << 16) | val; | |
13033 | } | |
13034 | ||
3ccad066 RS |
13035 | /* Like decode_mips16_operand, but require the operand to be defined and |
13036 | require it to be an integer. */ | |
13037 | ||
13038 | static const struct mips_int_operand * | |
13039 | mips16_immed_operand (int type, bfd_boolean extended_p) | |
13040 | { | |
13041 | const struct mips_operand *operand; | |
13042 | ||
13043 | operand = decode_mips16_operand (type, extended_p); | |
13044 | if (!operand || (operand->type != OP_INT && operand->type != OP_PCREL)) | |
13045 | abort (); | |
13046 | return (const struct mips_int_operand *) operand; | |
13047 | } | |
13048 | ||
13049 | /* Return true if SVAL fits OPERAND. RELOC is as for mips16_immed. */ | |
13050 | ||
13051 | static bfd_boolean | |
13052 | mips16_immed_in_range_p (const struct mips_int_operand *operand, | |
13053 | bfd_reloc_code_real_type reloc, offsetT sval) | |
13054 | { | |
13055 | int min_val, max_val; | |
13056 | ||
13057 | min_val = mips_int_operand_min (operand); | |
13058 | max_val = mips_int_operand_max (operand); | |
13059 | if (reloc != BFD_RELOC_UNUSED) | |
13060 | { | |
13061 | if (min_val < 0) | |
13062 | sval = SEXT_16BIT (sval); | |
13063 | else | |
13064 | sval &= 0xffff; | |
13065 | } | |
13066 | ||
13067 | return (sval >= min_val | |
13068 | && sval <= max_val | |
13069 | && (sval & ((1 << operand->shift) - 1)) == 0); | |
13070 | } | |
13071 | ||
5c04167a RS |
13072 | /* Install immediate value VAL into MIPS16 instruction *INSN, |
13073 | extending it if necessary. The instruction in *INSN may | |
13074 | already be extended. | |
13075 | ||
43c0598f RS |
13076 | RELOC is the relocation that produced VAL, or BFD_RELOC_UNUSED |
13077 | if none. In the former case, VAL is a 16-bit number with no | |
13078 | defined signedness. | |
13079 | ||
13080 | TYPE is the type of the immediate field. USER_INSN_LENGTH | |
13081 | is the length that the user requested, or 0 if none. */ | |
252b5132 RH |
13082 | |
13083 | static void | |
43c0598f RS |
13084 | mips16_immed (char *file, unsigned int line, int type, |
13085 | bfd_reloc_code_real_type reloc, offsetT val, | |
5c04167a | 13086 | unsigned int user_insn_length, unsigned long *insn) |
252b5132 | 13087 | { |
3ccad066 RS |
13088 | const struct mips_int_operand *operand; |
13089 | unsigned int uval, length; | |
252b5132 | 13090 | |
3ccad066 RS |
13091 | operand = mips16_immed_operand (type, FALSE); |
13092 | if (!mips16_immed_in_range_p (operand, reloc, val)) | |
5c04167a RS |
13093 | { |
13094 | /* We need an extended instruction. */ | |
13095 | if (user_insn_length == 2) | |
13096 | as_bad_where (file, line, _("invalid unextended operand value")); | |
13097 | else | |
13098 | *insn |= MIPS16_EXTEND; | |
13099 | } | |
13100 | else if (user_insn_length == 4) | |
13101 | { | |
13102 | /* The operand doesn't force an unextended instruction to be extended. | |
13103 | Warn if the user wanted an extended instruction anyway. */ | |
13104 | *insn |= MIPS16_EXTEND; | |
13105 | as_warn_where (file, line, | |
13106 | _("extended operand requested but not required")); | |
13107 | } | |
252b5132 | 13108 | |
3ccad066 RS |
13109 | length = mips16_opcode_length (*insn); |
13110 | if (length == 4) | |
252b5132 | 13111 | { |
3ccad066 RS |
13112 | operand = mips16_immed_operand (type, TRUE); |
13113 | if (!mips16_immed_in_range_p (operand, reloc, val)) | |
13114 | as_bad_where (file, line, | |
13115 | _("operand value out of range for instruction")); | |
252b5132 | 13116 | } |
3ccad066 RS |
13117 | uval = ((unsigned int) val >> operand->shift) - operand->bias; |
13118 | if (length == 2) | |
13119 | *insn = mips_insert_operand (&operand->root, *insn, uval); | |
252b5132 | 13120 | else |
3ccad066 | 13121 | *insn |= mips16_immed_extend (uval, operand->root.size); |
252b5132 RH |
13122 | } |
13123 | \f | |
d6f16593 | 13124 | struct percent_op_match |
ad8d3bb3 | 13125 | { |
5e0116d5 RS |
13126 | const char *str; |
13127 | bfd_reloc_code_real_type reloc; | |
d6f16593 MR |
13128 | }; |
13129 | ||
13130 | static const struct percent_op_match mips_percent_op[] = | |
ad8d3bb3 | 13131 | { |
5e0116d5 | 13132 | {"%lo", BFD_RELOC_LO16}, |
5e0116d5 RS |
13133 | {"%call_hi", BFD_RELOC_MIPS_CALL_HI16}, |
13134 | {"%call_lo", BFD_RELOC_MIPS_CALL_LO16}, | |
13135 | {"%call16", BFD_RELOC_MIPS_CALL16}, | |
13136 | {"%got_disp", BFD_RELOC_MIPS_GOT_DISP}, | |
13137 | {"%got_page", BFD_RELOC_MIPS_GOT_PAGE}, | |
13138 | {"%got_ofst", BFD_RELOC_MIPS_GOT_OFST}, | |
13139 | {"%got_hi", BFD_RELOC_MIPS_GOT_HI16}, | |
13140 | {"%got_lo", BFD_RELOC_MIPS_GOT_LO16}, | |
13141 | {"%got", BFD_RELOC_MIPS_GOT16}, | |
13142 | {"%gp_rel", BFD_RELOC_GPREL16}, | |
13143 | {"%half", BFD_RELOC_16}, | |
13144 | {"%highest", BFD_RELOC_MIPS_HIGHEST}, | |
13145 | {"%higher", BFD_RELOC_MIPS_HIGHER}, | |
13146 | {"%neg", BFD_RELOC_MIPS_SUB}, | |
3f98094e DJ |
13147 | {"%tlsgd", BFD_RELOC_MIPS_TLS_GD}, |
13148 | {"%tlsldm", BFD_RELOC_MIPS_TLS_LDM}, | |
13149 | {"%dtprel_hi", BFD_RELOC_MIPS_TLS_DTPREL_HI16}, | |
13150 | {"%dtprel_lo", BFD_RELOC_MIPS_TLS_DTPREL_LO16}, | |
13151 | {"%tprel_hi", BFD_RELOC_MIPS_TLS_TPREL_HI16}, | |
13152 | {"%tprel_lo", BFD_RELOC_MIPS_TLS_TPREL_LO16}, | |
13153 | {"%gottprel", BFD_RELOC_MIPS_TLS_GOTTPREL}, | |
5e0116d5 | 13154 | {"%hi", BFD_RELOC_HI16_S} |
ad8d3bb3 TS |
13155 | }; |
13156 | ||
d6f16593 MR |
13157 | static const struct percent_op_match mips16_percent_op[] = |
13158 | { | |
13159 | {"%lo", BFD_RELOC_MIPS16_LO16}, | |
13160 | {"%gprel", BFD_RELOC_MIPS16_GPREL}, | |
738e5348 RS |
13161 | {"%got", BFD_RELOC_MIPS16_GOT16}, |
13162 | {"%call16", BFD_RELOC_MIPS16_CALL16}, | |
d0f13682 CLT |
13163 | {"%hi", BFD_RELOC_MIPS16_HI16_S}, |
13164 | {"%tlsgd", BFD_RELOC_MIPS16_TLS_GD}, | |
13165 | {"%tlsldm", BFD_RELOC_MIPS16_TLS_LDM}, | |
13166 | {"%dtprel_hi", BFD_RELOC_MIPS16_TLS_DTPREL_HI16}, | |
13167 | {"%dtprel_lo", BFD_RELOC_MIPS16_TLS_DTPREL_LO16}, | |
13168 | {"%tprel_hi", BFD_RELOC_MIPS16_TLS_TPREL_HI16}, | |
13169 | {"%tprel_lo", BFD_RELOC_MIPS16_TLS_TPREL_LO16}, | |
13170 | {"%gottprel", BFD_RELOC_MIPS16_TLS_GOTTPREL} | |
d6f16593 MR |
13171 | }; |
13172 | ||
252b5132 | 13173 | |
5e0116d5 RS |
13174 | /* Return true if *STR points to a relocation operator. When returning true, |
13175 | move *STR over the operator and store its relocation code in *RELOC. | |
13176 | Leave both *STR and *RELOC alone when returning false. */ | |
13177 | ||
13178 | static bfd_boolean | |
17a2f251 | 13179 | parse_relocation (char **str, bfd_reloc_code_real_type *reloc) |
252b5132 | 13180 | { |
d6f16593 MR |
13181 | const struct percent_op_match *percent_op; |
13182 | size_t limit, i; | |
13183 | ||
13184 | if (mips_opts.mips16) | |
13185 | { | |
13186 | percent_op = mips16_percent_op; | |
13187 | limit = ARRAY_SIZE (mips16_percent_op); | |
13188 | } | |
13189 | else | |
13190 | { | |
13191 | percent_op = mips_percent_op; | |
13192 | limit = ARRAY_SIZE (mips_percent_op); | |
13193 | } | |
76b3015f | 13194 | |
d6f16593 | 13195 | for (i = 0; i < limit; i++) |
5e0116d5 | 13196 | if (strncasecmp (*str, percent_op[i].str, strlen (percent_op[i].str)) == 0) |
394f9b3a | 13197 | { |
3f98094e DJ |
13198 | int len = strlen (percent_op[i].str); |
13199 | ||
13200 | if (!ISSPACE ((*str)[len]) && (*str)[len] != '(') | |
13201 | continue; | |
13202 | ||
5e0116d5 RS |
13203 | *str += strlen (percent_op[i].str); |
13204 | *reloc = percent_op[i].reloc; | |
394f9b3a | 13205 | |
5e0116d5 RS |
13206 | /* Check whether the output BFD supports this relocation. |
13207 | If not, issue an error and fall back on something safe. */ | |
13208 | if (!bfd_reloc_type_lookup (stdoutput, percent_op[i].reloc)) | |
394f9b3a | 13209 | { |
20203fb9 | 13210 | as_bad (_("relocation %s isn't supported by the current ABI"), |
5e0116d5 | 13211 | percent_op[i].str); |
01a3f561 | 13212 | *reloc = BFD_RELOC_UNUSED; |
394f9b3a | 13213 | } |
5e0116d5 | 13214 | return TRUE; |
394f9b3a | 13215 | } |
5e0116d5 | 13216 | return FALSE; |
394f9b3a | 13217 | } |
ad8d3bb3 | 13218 | |
ad8d3bb3 | 13219 | |
5e0116d5 RS |
13220 | /* Parse string STR as a 16-bit relocatable operand. Store the |
13221 | expression in *EP and the relocations in the array starting | |
13222 | at RELOC. Return the number of relocation operators used. | |
ad8d3bb3 | 13223 | |
01a3f561 | 13224 | On exit, EXPR_END points to the first character after the expression. */ |
ad8d3bb3 | 13225 | |
5e0116d5 | 13226 | static size_t |
17a2f251 TS |
13227 | my_getSmallExpression (expressionS *ep, bfd_reloc_code_real_type *reloc, |
13228 | char *str) | |
ad8d3bb3 | 13229 | { |
5e0116d5 RS |
13230 | bfd_reloc_code_real_type reversed_reloc[3]; |
13231 | size_t reloc_index, i; | |
09b8f35a RS |
13232 | int crux_depth, str_depth; |
13233 | char *crux; | |
5e0116d5 RS |
13234 | |
13235 | /* Search for the start of the main expression, recoding relocations | |
09b8f35a RS |
13236 | in REVERSED_RELOC. End the loop with CRUX pointing to the start |
13237 | of the main expression and with CRUX_DEPTH containing the number | |
13238 | of open brackets at that point. */ | |
13239 | reloc_index = -1; | |
13240 | str_depth = 0; | |
13241 | do | |
fb1b3232 | 13242 | { |
09b8f35a RS |
13243 | reloc_index++; |
13244 | crux = str; | |
13245 | crux_depth = str_depth; | |
13246 | ||
13247 | /* Skip over whitespace and brackets, keeping count of the number | |
13248 | of brackets. */ | |
13249 | while (*str == ' ' || *str == '\t' || *str == '(') | |
13250 | if (*str++ == '(') | |
13251 | str_depth++; | |
5e0116d5 | 13252 | } |
09b8f35a RS |
13253 | while (*str == '%' |
13254 | && reloc_index < (HAVE_NEWABI ? 3 : 1) | |
13255 | && parse_relocation (&str, &reversed_reloc[reloc_index])); | |
ad8d3bb3 | 13256 | |
09b8f35a | 13257 | my_getExpression (ep, crux); |
5e0116d5 | 13258 | str = expr_end; |
394f9b3a | 13259 | |
5e0116d5 | 13260 | /* Match every open bracket. */ |
09b8f35a | 13261 | while (crux_depth > 0 && (*str == ')' || *str == ' ' || *str == '\t')) |
5e0116d5 | 13262 | if (*str++ == ')') |
09b8f35a | 13263 | crux_depth--; |
394f9b3a | 13264 | |
09b8f35a | 13265 | if (crux_depth > 0) |
20203fb9 | 13266 | as_bad (_("unclosed '('")); |
394f9b3a | 13267 | |
5e0116d5 | 13268 | expr_end = str; |
252b5132 | 13269 | |
01a3f561 | 13270 | if (reloc_index != 0) |
64bdfcaf RS |
13271 | { |
13272 | prev_reloc_op_frag = frag_now; | |
13273 | for (i = 0; i < reloc_index; i++) | |
13274 | reloc[i] = reversed_reloc[reloc_index - 1 - i]; | |
13275 | } | |
fb1b3232 | 13276 | |
5e0116d5 | 13277 | return reloc_index; |
252b5132 RH |
13278 | } |
13279 | ||
13280 | static void | |
17a2f251 | 13281 | my_getExpression (expressionS *ep, char *str) |
252b5132 RH |
13282 | { |
13283 | char *save_in; | |
13284 | ||
13285 | save_in = input_line_pointer; | |
13286 | input_line_pointer = str; | |
13287 | expression (ep); | |
13288 | expr_end = input_line_pointer; | |
13289 | input_line_pointer = save_in; | |
252b5132 RH |
13290 | } |
13291 | ||
252b5132 | 13292 | char * |
17a2f251 | 13293 | md_atof (int type, char *litP, int *sizeP) |
252b5132 | 13294 | { |
499ac353 | 13295 | return ieee_md_atof (type, litP, sizeP, target_big_endian); |
252b5132 RH |
13296 | } |
13297 | ||
13298 | void | |
17a2f251 | 13299 | md_number_to_chars (char *buf, valueT val, int n) |
252b5132 RH |
13300 | { |
13301 | if (target_big_endian) | |
13302 | number_to_chars_bigendian (buf, val, n); | |
13303 | else | |
13304 | number_to_chars_littleendian (buf, val, n); | |
13305 | } | |
13306 | \f | |
e013f690 TS |
13307 | static int support_64bit_objects(void) |
13308 | { | |
13309 | const char **list, **l; | |
aa3d8fdf | 13310 | int yes; |
e013f690 TS |
13311 | |
13312 | list = bfd_target_list (); | |
13313 | for (l = list; *l != NULL; l++) | |
aeffff67 RS |
13314 | if (strcmp (*l, ELF_TARGET ("elf64-", "big")) == 0 |
13315 | || strcmp (*l, ELF_TARGET ("elf64-", "little")) == 0) | |
e013f690 | 13316 | break; |
aa3d8fdf | 13317 | yes = (*l != NULL); |
e013f690 | 13318 | free (list); |
aa3d8fdf | 13319 | return yes; |
e013f690 TS |
13320 | } |
13321 | ||
316f5878 RS |
13322 | /* Set STRING_PTR (either &mips_arch_string or &mips_tune_string) to |
13323 | NEW_VALUE. Warn if another value was already specified. Note: | |
13324 | we have to defer parsing the -march and -mtune arguments in order | |
13325 | to handle 'from-abi' correctly, since the ABI might be specified | |
13326 | in a later argument. */ | |
13327 | ||
13328 | static void | |
17a2f251 | 13329 | mips_set_option_string (const char **string_ptr, const char *new_value) |
316f5878 RS |
13330 | { |
13331 | if (*string_ptr != 0 && strcasecmp (*string_ptr, new_value) != 0) | |
1661c76c | 13332 | as_warn (_("a different %s was already specified, is now %s"), |
316f5878 RS |
13333 | string_ptr == &mips_arch_string ? "-march" : "-mtune", |
13334 | new_value); | |
13335 | ||
13336 | *string_ptr = new_value; | |
13337 | } | |
13338 | ||
252b5132 | 13339 | int |
17a2f251 | 13340 | md_parse_option (int c, char *arg) |
252b5132 | 13341 | { |
c6278170 RS |
13342 | unsigned int i; |
13343 | ||
13344 | for (i = 0; i < ARRAY_SIZE (mips_ases); i++) | |
13345 | if (c == mips_ases[i].option_on || c == mips_ases[i].option_off) | |
13346 | { | |
13347 | file_ase_explicit |= mips_set_ase (&mips_ases[i], | |
13348 | c == mips_ases[i].option_on); | |
13349 | return 1; | |
13350 | } | |
13351 | ||
252b5132 RH |
13352 | switch (c) |
13353 | { | |
119d663a NC |
13354 | case OPTION_CONSTRUCT_FLOATS: |
13355 | mips_disable_float_construction = 0; | |
13356 | break; | |
bdaaa2e1 | 13357 | |
119d663a NC |
13358 | case OPTION_NO_CONSTRUCT_FLOATS: |
13359 | mips_disable_float_construction = 1; | |
13360 | break; | |
bdaaa2e1 | 13361 | |
252b5132 RH |
13362 | case OPTION_TRAP: |
13363 | mips_trap = 1; | |
13364 | break; | |
13365 | ||
13366 | case OPTION_BREAK: | |
13367 | mips_trap = 0; | |
13368 | break; | |
13369 | ||
13370 | case OPTION_EB: | |
13371 | target_big_endian = 1; | |
13372 | break; | |
13373 | ||
13374 | case OPTION_EL: | |
13375 | target_big_endian = 0; | |
13376 | break; | |
13377 | ||
13378 | case 'O': | |
4ffff32f TS |
13379 | if (arg == NULL) |
13380 | mips_optimize = 1; | |
13381 | else if (arg[0] == '0') | |
13382 | mips_optimize = 0; | |
13383 | else if (arg[0] == '1') | |
252b5132 RH |
13384 | mips_optimize = 1; |
13385 | else | |
13386 | mips_optimize = 2; | |
13387 | break; | |
13388 | ||
13389 | case 'g': | |
13390 | if (arg == NULL) | |
13391 | mips_debug = 2; | |
13392 | else | |
13393 | mips_debug = atoi (arg); | |
252b5132 RH |
13394 | break; |
13395 | ||
13396 | case OPTION_MIPS1: | |
316f5878 | 13397 | file_mips_isa = ISA_MIPS1; |
252b5132 RH |
13398 | break; |
13399 | ||
13400 | case OPTION_MIPS2: | |
316f5878 | 13401 | file_mips_isa = ISA_MIPS2; |
252b5132 RH |
13402 | break; |
13403 | ||
13404 | case OPTION_MIPS3: | |
316f5878 | 13405 | file_mips_isa = ISA_MIPS3; |
252b5132 RH |
13406 | break; |
13407 | ||
13408 | case OPTION_MIPS4: | |
316f5878 | 13409 | file_mips_isa = ISA_MIPS4; |
e7af610e NC |
13410 | break; |
13411 | ||
84ea6cf2 | 13412 | case OPTION_MIPS5: |
316f5878 | 13413 | file_mips_isa = ISA_MIPS5; |
84ea6cf2 NC |
13414 | break; |
13415 | ||
e7af610e | 13416 | case OPTION_MIPS32: |
316f5878 | 13417 | file_mips_isa = ISA_MIPS32; |
252b5132 RH |
13418 | break; |
13419 | ||
af7ee8bf CD |
13420 | case OPTION_MIPS32R2: |
13421 | file_mips_isa = ISA_MIPS32R2; | |
13422 | break; | |
13423 | ||
5f74bc13 CD |
13424 | case OPTION_MIPS64R2: |
13425 | file_mips_isa = ISA_MIPS64R2; | |
13426 | break; | |
13427 | ||
84ea6cf2 | 13428 | case OPTION_MIPS64: |
316f5878 | 13429 | file_mips_isa = ISA_MIPS64; |
84ea6cf2 NC |
13430 | break; |
13431 | ||
ec68c924 | 13432 | case OPTION_MTUNE: |
316f5878 RS |
13433 | mips_set_option_string (&mips_tune_string, arg); |
13434 | break; | |
ec68c924 | 13435 | |
316f5878 RS |
13436 | case OPTION_MARCH: |
13437 | mips_set_option_string (&mips_arch_string, arg); | |
252b5132 RH |
13438 | break; |
13439 | ||
13440 | case OPTION_M4650: | |
316f5878 RS |
13441 | mips_set_option_string (&mips_arch_string, "4650"); |
13442 | mips_set_option_string (&mips_tune_string, "4650"); | |
252b5132 RH |
13443 | break; |
13444 | ||
13445 | case OPTION_NO_M4650: | |
13446 | break; | |
13447 | ||
13448 | case OPTION_M4010: | |
316f5878 RS |
13449 | mips_set_option_string (&mips_arch_string, "4010"); |
13450 | mips_set_option_string (&mips_tune_string, "4010"); | |
252b5132 RH |
13451 | break; |
13452 | ||
13453 | case OPTION_NO_M4010: | |
13454 | break; | |
13455 | ||
13456 | case OPTION_M4100: | |
316f5878 RS |
13457 | mips_set_option_string (&mips_arch_string, "4100"); |
13458 | mips_set_option_string (&mips_tune_string, "4100"); | |
252b5132 RH |
13459 | break; |
13460 | ||
13461 | case OPTION_NO_M4100: | |
13462 | break; | |
13463 | ||
252b5132 | 13464 | case OPTION_M3900: |
316f5878 RS |
13465 | mips_set_option_string (&mips_arch_string, "3900"); |
13466 | mips_set_option_string (&mips_tune_string, "3900"); | |
252b5132 | 13467 | break; |
bdaaa2e1 | 13468 | |
252b5132 RH |
13469 | case OPTION_NO_M3900: |
13470 | break; | |
13471 | ||
df58fc94 RS |
13472 | case OPTION_MICROMIPS: |
13473 | if (mips_opts.mips16 == 1) | |
13474 | { | |
13475 | as_bad (_("-mmicromips cannot be used with -mips16")); | |
13476 | return 0; | |
13477 | } | |
13478 | mips_opts.micromips = 1; | |
13479 | mips_no_prev_insn (); | |
13480 | break; | |
13481 | ||
13482 | case OPTION_NO_MICROMIPS: | |
13483 | mips_opts.micromips = 0; | |
13484 | mips_no_prev_insn (); | |
13485 | break; | |
13486 | ||
252b5132 | 13487 | case OPTION_MIPS16: |
df58fc94 RS |
13488 | if (mips_opts.micromips == 1) |
13489 | { | |
13490 | as_bad (_("-mips16 cannot be used with -micromips")); | |
13491 | return 0; | |
13492 | } | |
252b5132 | 13493 | mips_opts.mips16 = 1; |
7d10b47d | 13494 | mips_no_prev_insn (); |
252b5132 RH |
13495 | break; |
13496 | ||
13497 | case OPTION_NO_MIPS16: | |
13498 | mips_opts.mips16 = 0; | |
7d10b47d | 13499 | mips_no_prev_insn (); |
252b5132 RH |
13500 | break; |
13501 | ||
6a32d874 CM |
13502 | case OPTION_FIX_24K: |
13503 | mips_fix_24k = 1; | |
13504 | break; | |
13505 | ||
13506 | case OPTION_NO_FIX_24K: | |
13507 | mips_fix_24k = 0; | |
13508 | break; | |
13509 | ||
c67a084a NC |
13510 | case OPTION_FIX_LOONGSON2F_JUMP: |
13511 | mips_fix_loongson2f_jump = TRUE; | |
13512 | break; | |
13513 | ||
13514 | case OPTION_NO_FIX_LOONGSON2F_JUMP: | |
13515 | mips_fix_loongson2f_jump = FALSE; | |
13516 | break; | |
13517 | ||
13518 | case OPTION_FIX_LOONGSON2F_NOP: | |
13519 | mips_fix_loongson2f_nop = TRUE; | |
13520 | break; | |
13521 | ||
13522 | case OPTION_NO_FIX_LOONGSON2F_NOP: | |
13523 | mips_fix_loongson2f_nop = FALSE; | |
13524 | break; | |
13525 | ||
d766e8ec RS |
13526 | case OPTION_FIX_VR4120: |
13527 | mips_fix_vr4120 = 1; | |
60b63b72 RS |
13528 | break; |
13529 | ||
d766e8ec RS |
13530 | case OPTION_NO_FIX_VR4120: |
13531 | mips_fix_vr4120 = 0; | |
60b63b72 RS |
13532 | break; |
13533 | ||
7d8e00cf RS |
13534 | case OPTION_FIX_VR4130: |
13535 | mips_fix_vr4130 = 1; | |
13536 | break; | |
13537 | ||
13538 | case OPTION_NO_FIX_VR4130: | |
13539 | mips_fix_vr4130 = 0; | |
13540 | break; | |
13541 | ||
d954098f DD |
13542 | case OPTION_FIX_CN63XXP1: |
13543 | mips_fix_cn63xxp1 = TRUE; | |
13544 | break; | |
13545 | ||
13546 | case OPTION_NO_FIX_CN63XXP1: | |
13547 | mips_fix_cn63xxp1 = FALSE; | |
13548 | break; | |
13549 | ||
4a6a3df4 AO |
13550 | case OPTION_RELAX_BRANCH: |
13551 | mips_relax_branch = 1; | |
13552 | break; | |
13553 | ||
13554 | case OPTION_NO_RELAX_BRANCH: | |
13555 | mips_relax_branch = 0; | |
13556 | break; | |
13557 | ||
833794fc MR |
13558 | case OPTION_INSN32: |
13559 | mips_opts.insn32 = TRUE; | |
13560 | break; | |
13561 | ||
13562 | case OPTION_NO_INSN32: | |
13563 | mips_opts.insn32 = FALSE; | |
13564 | break; | |
13565 | ||
aa6975fb ILT |
13566 | case OPTION_MSHARED: |
13567 | mips_in_shared = TRUE; | |
13568 | break; | |
13569 | ||
13570 | case OPTION_MNO_SHARED: | |
13571 | mips_in_shared = FALSE; | |
13572 | break; | |
13573 | ||
aed1a261 RS |
13574 | case OPTION_MSYM32: |
13575 | mips_opts.sym32 = TRUE; | |
13576 | break; | |
13577 | ||
13578 | case OPTION_MNO_SYM32: | |
13579 | mips_opts.sym32 = FALSE; | |
13580 | break; | |
13581 | ||
252b5132 RH |
13582 | /* When generating ELF code, we permit -KPIC and -call_shared to |
13583 | select SVR4_PIC, and -non_shared to select no PIC. This is | |
13584 | intended to be compatible with Irix 5. */ | |
13585 | case OPTION_CALL_SHARED: | |
252b5132 | 13586 | mips_pic = SVR4_PIC; |
143d77c5 | 13587 | mips_abicalls = TRUE; |
252b5132 RH |
13588 | break; |
13589 | ||
861fb55a | 13590 | case OPTION_CALL_NONPIC: |
861fb55a DJ |
13591 | mips_pic = NO_PIC; |
13592 | mips_abicalls = TRUE; | |
13593 | break; | |
13594 | ||
252b5132 | 13595 | case OPTION_NON_SHARED: |
252b5132 | 13596 | mips_pic = NO_PIC; |
143d77c5 | 13597 | mips_abicalls = FALSE; |
252b5132 RH |
13598 | break; |
13599 | ||
44075ae2 TS |
13600 | /* The -xgot option tells the assembler to use 32 bit offsets |
13601 | when accessing the got in SVR4_PIC mode. It is for Irix | |
252b5132 RH |
13602 | compatibility. */ |
13603 | case OPTION_XGOT: | |
13604 | mips_big_got = 1; | |
13605 | break; | |
13606 | ||
13607 | case 'G': | |
6caf9ef4 TS |
13608 | g_switch_value = atoi (arg); |
13609 | g_switch_seen = 1; | |
252b5132 RH |
13610 | break; |
13611 | ||
34ba82a8 TS |
13612 | /* The -32, -n32 and -64 options are shortcuts for -mabi=32, -mabi=n32 |
13613 | and -mabi=64. */ | |
252b5132 | 13614 | case OPTION_32: |
f3ded42a | 13615 | mips_abi = O32_ABI; |
252b5132 RH |
13616 | break; |
13617 | ||
e013f690 | 13618 | case OPTION_N32: |
316f5878 | 13619 | mips_abi = N32_ABI; |
e013f690 | 13620 | break; |
252b5132 | 13621 | |
e013f690 | 13622 | case OPTION_64: |
316f5878 | 13623 | mips_abi = N64_ABI; |
f43abd2b | 13624 | if (!support_64bit_objects()) |
1661c76c | 13625 | as_fatal (_("no compiled in support for 64 bit object file format")); |
252b5132 RH |
13626 | break; |
13627 | ||
c97ef257 | 13628 | case OPTION_GP32: |
a325df1d | 13629 | file_mips_gp32 = 1; |
c97ef257 AH |
13630 | break; |
13631 | ||
13632 | case OPTION_GP64: | |
a325df1d | 13633 | file_mips_gp32 = 0; |
c97ef257 | 13634 | break; |
252b5132 | 13635 | |
ca4e0257 | 13636 | case OPTION_FP32: |
a325df1d | 13637 | file_mips_fp32 = 1; |
316f5878 RS |
13638 | break; |
13639 | ||
13640 | case OPTION_FP64: | |
13641 | file_mips_fp32 = 0; | |
ca4e0257 RS |
13642 | break; |
13643 | ||
037b32b9 AN |
13644 | case OPTION_SINGLE_FLOAT: |
13645 | file_mips_single_float = 1; | |
13646 | break; | |
13647 | ||
13648 | case OPTION_DOUBLE_FLOAT: | |
13649 | file_mips_single_float = 0; | |
13650 | break; | |
13651 | ||
13652 | case OPTION_SOFT_FLOAT: | |
13653 | file_mips_soft_float = 1; | |
13654 | break; | |
13655 | ||
13656 | case OPTION_HARD_FLOAT: | |
13657 | file_mips_soft_float = 0; | |
13658 | break; | |
13659 | ||
252b5132 | 13660 | case OPTION_MABI: |
e013f690 | 13661 | if (strcmp (arg, "32") == 0) |
316f5878 | 13662 | mips_abi = O32_ABI; |
e013f690 | 13663 | else if (strcmp (arg, "o64") == 0) |
316f5878 | 13664 | mips_abi = O64_ABI; |
e013f690 | 13665 | else if (strcmp (arg, "n32") == 0) |
316f5878 | 13666 | mips_abi = N32_ABI; |
e013f690 TS |
13667 | else if (strcmp (arg, "64") == 0) |
13668 | { | |
316f5878 | 13669 | mips_abi = N64_ABI; |
e013f690 | 13670 | if (! support_64bit_objects()) |
1661c76c | 13671 | as_fatal (_("no compiled in support for 64 bit object file " |
e013f690 TS |
13672 | "format")); |
13673 | } | |
13674 | else if (strcmp (arg, "eabi") == 0) | |
316f5878 | 13675 | mips_abi = EABI_ABI; |
e013f690 | 13676 | else |
da0e507f TS |
13677 | { |
13678 | as_fatal (_("invalid abi -mabi=%s"), arg); | |
13679 | return 0; | |
13680 | } | |
252b5132 RH |
13681 | break; |
13682 | ||
6b76fefe | 13683 | case OPTION_M7000_HILO_FIX: |
b34976b6 | 13684 | mips_7000_hilo_fix = TRUE; |
6b76fefe CM |
13685 | break; |
13686 | ||
9ee72ff1 | 13687 | case OPTION_MNO_7000_HILO_FIX: |
b34976b6 | 13688 | mips_7000_hilo_fix = FALSE; |
6b76fefe CM |
13689 | break; |
13690 | ||
ecb4347a | 13691 | case OPTION_MDEBUG: |
b34976b6 | 13692 | mips_flag_mdebug = TRUE; |
ecb4347a DJ |
13693 | break; |
13694 | ||
13695 | case OPTION_NO_MDEBUG: | |
b34976b6 | 13696 | mips_flag_mdebug = FALSE; |
ecb4347a | 13697 | break; |
dcd410fe RO |
13698 | |
13699 | case OPTION_PDR: | |
13700 | mips_flag_pdr = TRUE; | |
13701 | break; | |
13702 | ||
13703 | case OPTION_NO_PDR: | |
13704 | mips_flag_pdr = FALSE; | |
13705 | break; | |
0a44bf69 RS |
13706 | |
13707 | case OPTION_MVXWORKS_PIC: | |
13708 | mips_pic = VXWORKS_PIC; | |
13709 | break; | |
ecb4347a | 13710 | |
ba92f887 MR |
13711 | case OPTION_NAN: |
13712 | if (strcmp (arg, "2008") == 0) | |
13713 | mips_flag_nan2008 = TRUE; | |
13714 | else if (strcmp (arg, "legacy") == 0) | |
13715 | mips_flag_nan2008 = FALSE; | |
13716 | else | |
13717 | { | |
1661c76c | 13718 | as_fatal (_("invalid NaN setting -mnan=%s"), arg); |
ba92f887 MR |
13719 | return 0; |
13720 | } | |
13721 | break; | |
13722 | ||
252b5132 RH |
13723 | default: |
13724 | return 0; | |
13725 | } | |
13726 | ||
c67a084a NC |
13727 | mips_fix_loongson2f = mips_fix_loongson2f_nop || mips_fix_loongson2f_jump; |
13728 | ||
252b5132 RH |
13729 | return 1; |
13730 | } | |
316f5878 RS |
13731 | \f |
13732 | /* Set up globals to generate code for the ISA or processor | |
13733 | described by INFO. */ | |
252b5132 | 13734 | |
252b5132 | 13735 | static void |
17a2f251 | 13736 | mips_set_architecture (const struct mips_cpu_info *info) |
252b5132 | 13737 | { |
316f5878 | 13738 | if (info != 0) |
252b5132 | 13739 | { |
fef14a42 TS |
13740 | file_mips_arch = info->cpu; |
13741 | mips_opts.arch = info->cpu; | |
316f5878 | 13742 | mips_opts.isa = info->isa; |
252b5132 | 13743 | } |
252b5132 RH |
13744 | } |
13745 | ||
252b5132 | 13746 | |
316f5878 | 13747 | /* Likewise for tuning. */ |
252b5132 | 13748 | |
316f5878 | 13749 | static void |
17a2f251 | 13750 | mips_set_tune (const struct mips_cpu_info *info) |
316f5878 RS |
13751 | { |
13752 | if (info != 0) | |
fef14a42 | 13753 | mips_tune = info->cpu; |
316f5878 | 13754 | } |
80cc45a5 | 13755 | |
34ba82a8 | 13756 | |
252b5132 | 13757 | void |
17a2f251 | 13758 | mips_after_parse_args (void) |
e9670677 | 13759 | { |
fef14a42 TS |
13760 | const struct mips_cpu_info *arch_info = 0; |
13761 | const struct mips_cpu_info *tune_info = 0; | |
13762 | ||
e9670677 | 13763 | /* GP relative stuff not working for PE */ |
6caf9ef4 | 13764 | if (strncmp (TARGET_OS, "pe", 2) == 0) |
e9670677 | 13765 | { |
6caf9ef4 | 13766 | if (g_switch_seen && g_switch_value != 0) |
1661c76c | 13767 | as_bad (_("-G not supported in this configuration")); |
e9670677 MR |
13768 | g_switch_value = 0; |
13769 | } | |
13770 | ||
cac012d6 AO |
13771 | if (mips_abi == NO_ABI) |
13772 | mips_abi = MIPS_DEFAULT_ABI; | |
13773 | ||
22923709 RS |
13774 | /* The following code determines the architecture and register size. |
13775 | Similar code was added to GCC 3.3 (see override_options() in | |
13776 | config/mips/mips.c). The GAS and GCC code should be kept in sync | |
13777 | as much as possible. */ | |
e9670677 | 13778 | |
316f5878 | 13779 | if (mips_arch_string != 0) |
fef14a42 | 13780 | arch_info = mips_parse_cpu ("-march", mips_arch_string); |
e9670677 | 13781 | |
316f5878 | 13782 | if (file_mips_isa != ISA_UNKNOWN) |
e9670677 | 13783 | { |
316f5878 | 13784 | /* Handle -mipsN. At this point, file_mips_isa contains the |
fef14a42 | 13785 | ISA level specified by -mipsN, while arch_info->isa contains |
316f5878 | 13786 | the -march selection (if any). */ |
fef14a42 | 13787 | if (arch_info != 0) |
e9670677 | 13788 | { |
316f5878 RS |
13789 | /* -march takes precedence over -mipsN, since it is more descriptive. |
13790 | There's no harm in specifying both as long as the ISA levels | |
13791 | are the same. */ | |
fef14a42 | 13792 | if (file_mips_isa != arch_info->isa) |
1661c76c RS |
13793 | as_bad (_("-%s conflicts with the other architecture options," |
13794 | " which imply -%s"), | |
316f5878 | 13795 | mips_cpu_info_from_isa (file_mips_isa)->name, |
fef14a42 | 13796 | mips_cpu_info_from_isa (arch_info->isa)->name); |
e9670677 | 13797 | } |
316f5878 | 13798 | else |
fef14a42 | 13799 | arch_info = mips_cpu_info_from_isa (file_mips_isa); |
e9670677 MR |
13800 | } |
13801 | ||
fef14a42 | 13802 | if (arch_info == 0) |
95bfe26e MF |
13803 | { |
13804 | arch_info = mips_parse_cpu ("default CPU", MIPS_CPU_STRING_DEFAULT); | |
13805 | gas_assert (arch_info); | |
13806 | } | |
e9670677 | 13807 | |
fef14a42 | 13808 | if (ABI_NEEDS_64BIT_REGS (mips_abi) && !ISA_HAS_64BIT_REGS (arch_info->isa)) |
20203fb9 | 13809 | as_bad (_("-march=%s is not compatible with the selected ABI"), |
fef14a42 TS |
13810 | arch_info->name); |
13811 | ||
13812 | mips_set_architecture (arch_info); | |
13813 | ||
13814 | /* Optimize for file_mips_arch, unless -mtune selects a different processor. */ | |
13815 | if (mips_tune_string != 0) | |
13816 | tune_info = mips_parse_cpu ("-mtune", mips_tune_string); | |
e9670677 | 13817 | |
fef14a42 TS |
13818 | if (tune_info == 0) |
13819 | mips_set_tune (arch_info); | |
13820 | else | |
13821 | mips_set_tune (tune_info); | |
e9670677 | 13822 | |
316f5878 | 13823 | if (file_mips_gp32 >= 0) |
e9670677 | 13824 | { |
316f5878 RS |
13825 | /* The user specified the size of the integer registers. Make sure |
13826 | it agrees with the ABI and ISA. */ | |
13827 | if (file_mips_gp32 == 0 && !ISA_HAS_64BIT_REGS (mips_opts.isa)) | |
13828 | as_bad (_("-mgp64 used with a 32-bit processor")); | |
13829 | else if (file_mips_gp32 == 1 && ABI_NEEDS_64BIT_REGS (mips_abi)) | |
13830 | as_bad (_("-mgp32 used with a 64-bit ABI")); | |
13831 | else if (file_mips_gp32 == 0 && ABI_NEEDS_32BIT_REGS (mips_abi)) | |
13832 | as_bad (_("-mgp64 used with a 32-bit ABI")); | |
e9670677 MR |
13833 | } |
13834 | else | |
13835 | { | |
316f5878 RS |
13836 | /* Infer the integer register size from the ABI and processor. |
13837 | Restrict ourselves to 32-bit registers if that's all the | |
13838 | processor has, or if the ABI cannot handle 64-bit registers. */ | |
13839 | file_mips_gp32 = (ABI_NEEDS_32BIT_REGS (mips_abi) | |
13840 | || !ISA_HAS_64BIT_REGS (mips_opts.isa)); | |
e9670677 MR |
13841 | } |
13842 | ||
ad3fea08 TS |
13843 | switch (file_mips_fp32) |
13844 | { | |
13845 | default: | |
13846 | case -1: | |
13847 | /* No user specified float register size. | |
13848 | ??? GAS treats single-float processors as though they had 64-bit | |
13849 | float registers (although it complains when double-precision | |
13850 | instructions are used). As things stand, saying they have 32-bit | |
13851 | registers would lead to spurious "register must be even" messages. | |
13852 | So here we assume float registers are never smaller than the | |
13853 | integer ones. */ | |
13854 | if (file_mips_gp32 == 0) | |
13855 | /* 64-bit integer registers implies 64-bit float registers. */ | |
13856 | file_mips_fp32 = 0; | |
c6278170 | 13857 | else if ((mips_opts.ase & FP64_ASES) |
ad3fea08 TS |
13858 | && ISA_HAS_64BIT_FPRS (mips_opts.isa)) |
13859 | /* -mips3d and -mdmx imply 64-bit float registers, if possible. */ | |
13860 | file_mips_fp32 = 0; | |
13861 | else | |
13862 | /* 32-bit float registers. */ | |
13863 | file_mips_fp32 = 1; | |
13864 | break; | |
13865 | ||
13866 | /* The user specified the size of the float registers. Check if it | |
13867 | agrees with the ABI and ISA. */ | |
13868 | case 0: | |
13869 | if (!ISA_HAS_64BIT_FPRS (mips_opts.isa)) | |
13870 | as_bad (_("-mfp64 used with a 32-bit fpu")); | |
13871 | else if (ABI_NEEDS_32BIT_REGS (mips_abi) | |
13872 | && !ISA_HAS_MXHC1 (mips_opts.isa)) | |
13873 | as_warn (_("-mfp64 used with a 32-bit ABI")); | |
13874 | break; | |
13875 | case 1: | |
13876 | if (ABI_NEEDS_64BIT_REGS (mips_abi)) | |
13877 | as_warn (_("-mfp32 used with a 64-bit ABI")); | |
13878 | break; | |
13879 | } | |
e9670677 | 13880 | |
316f5878 | 13881 | /* End of GCC-shared inference code. */ |
e9670677 | 13882 | |
17a2f251 TS |
13883 | /* This flag is set when we have a 64-bit capable CPU but use only |
13884 | 32-bit wide registers. Note that EABI does not use it. */ | |
13885 | if (ISA_HAS_64BIT_REGS (mips_opts.isa) | |
13886 | && ((mips_abi == NO_ABI && file_mips_gp32 == 1) | |
13887 | || mips_abi == O32_ABI)) | |
316f5878 | 13888 | mips_32bitmode = 1; |
e9670677 MR |
13889 | |
13890 | if (mips_opts.isa == ISA_MIPS1 && mips_trap) | |
13891 | as_bad (_("trap exception not supported at ISA 1")); | |
13892 | ||
e9670677 MR |
13893 | /* If the selected architecture includes support for ASEs, enable |
13894 | generation of code for them. */ | |
a4672219 | 13895 | if (mips_opts.mips16 == -1) |
fef14a42 | 13896 | mips_opts.mips16 = (CPU_HAS_MIPS16 (file_mips_arch)) ? 1 : 0; |
df58fc94 RS |
13897 | if (mips_opts.micromips == -1) |
13898 | mips_opts.micromips = (CPU_HAS_MICROMIPS (file_mips_arch)) ? 1 : 0; | |
846ef2d0 RS |
13899 | |
13900 | /* MIPS3D and MDMX require 64-bit FPRs, so -mfp32 should stop those | |
13901 | ASEs from being selected implicitly. */ | |
13902 | if (file_mips_fp32 == 1) | |
13903 | file_ase_explicit |= ASE_MIPS3D | ASE_MDMX; | |
13904 | ||
13905 | /* If the user didn't explicitly select or deselect a particular ASE, | |
13906 | use the default setting for the CPU. */ | |
13907 | mips_opts.ase |= (arch_info->ase & ~file_ase_explicit); | |
13908 | ||
e9670677 | 13909 | file_mips_isa = mips_opts.isa; |
846ef2d0 | 13910 | file_ase = mips_opts.ase; |
e9670677 MR |
13911 | mips_opts.gp32 = file_mips_gp32; |
13912 | mips_opts.fp32 = file_mips_fp32; | |
037b32b9 AN |
13913 | mips_opts.soft_float = file_mips_soft_float; |
13914 | mips_opts.single_float = file_mips_single_float; | |
e9670677 | 13915 | |
c6278170 RS |
13916 | mips_check_isa_supports_ases (); |
13917 | ||
ecb4347a | 13918 | if (mips_flag_mdebug < 0) |
e8044f35 | 13919 | mips_flag_mdebug = 0; |
e9670677 MR |
13920 | } |
13921 | \f | |
13922 | void | |
17a2f251 | 13923 | mips_init_after_args (void) |
252b5132 RH |
13924 | { |
13925 | /* initialize opcodes */ | |
13926 | bfd_mips_num_opcodes = bfd_mips_num_builtin_opcodes; | |
beae10d5 | 13927 | mips_opcodes = (struct mips_opcode *) mips_builtin_opcodes; |
252b5132 RH |
13928 | } |
13929 | ||
13930 | long | |
17a2f251 | 13931 | md_pcrel_from (fixS *fixP) |
252b5132 | 13932 | { |
a7ebbfdf TS |
13933 | valueT addr = fixP->fx_where + fixP->fx_frag->fr_address; |
13934 | switch (fixP->fx_r_type) | |
13935 | { | |
df58fc94 RS |
13936 | case BFD_RELOC_MICROMIPS_7_PCREL_S1: |
13937 | case BFD_RELOC_MICROMIPS_10_PCREL_S1: | |
13938 | /* Return the address of the delay slot. */ | |
13939 | return addr + 2; | |
13940 | ||
13941 | case BFD_RELOC_MICROMIPS_16_PCREL_S1: | |
13942 | case BFD_RELOC_MICROMIPS_JMP: | |
a7ebbfdf TS |
13943 | case BFD_RELOC_16_PCREL_S2: |
13944 | case BFD_RELOC_MIPS_JMP: | |
13945 | /* Return the address of the delay slot. */ | |
13946 | return addr + 4; | |
df58fc94 | 13947 | |
b47468a6 CM |
13948 | case BFD_RELOC_32_PCREL: |
13949 | return addr; | |
13950 | ||
a7ebbfdf | 13951 | default: |
58ea3d6a | 13952 | /* We have no relocation type for PC relative MIPS16 instructions. */ |
64817874 TS |
13953 | if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg) |
13954 | as_bad_where (fixP->fx_file, fixP->fx_line, | |
1661c76c RS |
13955 | _("PC relative MIPS16 instruction references" |
13956 | " a different section")); | |
a7ebbfdf TS |
13957 | return addr; |
13958 | } | |
252b5132 RH |
13959 | } |
13960 | ||
252b5132 RH |
13961 | /* This is called before the symbol table is processed. In order to |
13962 | work with gcc when using mips-tfile, we must keep all local labels. | |
13963 | However, in other cases, we want to discard them. If we were | |
13964 | called with -g, but we didn't see any debugging information, it may | |
13965 | mean that gcc is smuggling debugging information through to | |
13966 | mips-tfile, in which case we must generate all local labels. */ | |
13967 | ||
13968 | void | |
17a2f251 | 13969 | mips_frob_file_before_adjust (void) |
252b5132 RH |
13970 | { |
13971 | #ifndef NO_ECOFF_DEBUGGING | |
13972 | if (ECOFF_DEBUGGING | |
13973 | && mips_debug != 0 | |
13974 | && ! ecoff_debugging_seen) | |
13975 | flag_keep_locals = 1; | |
13976 | #endif | |
13977 | } | |
13978 | ||
3b91255e | 13979 | /* Sort any unmatched HI16 and GOT16 relocs so that they immediately precede |
55cf6793 | 13980 | the corresponding LO16 reloc. This is called before md_apply_fix and |
3b91255e RS |
13981 | tc_gen_reloc. Unmatched relocs can only be generated by use of explicit |
13982 | relocation operators. | |
13983 | ||
13984 | For our purposes, a %lo() expression matches a %got() or %hi() | |
13985 | expression if: | |
13986 | ||
13987 | (a) it refers to the same symbol; and | |
13988 | (b) the offset applied in the %lo() expression is no lower than | |
13989 | the offset applied in the %got() or %hi(). | |
13990 | ||
13991 | (b) allows us to cope with code like: | |
13992 | ||
13993 | lui $4,%hi(foo) | |
13994 | lh $4,%lo(foo+2)($4) | |
13995 | ||
13996 | ...which is legal on RELA targets, and has a well-defined behaviour | |
13997 | if the user knows that adding 2 to "foo" will not induce a carry to | |
13998 | the high 16 bits. | |
13999 | ||
14000 | When several %lo()s match a particular %got() or %hi(), we use the | |
14001 | following rules to distinguish them: | |
14002 | ||
14003 | (1) %lo()s with smaller offsets are a better match than %lo()s with | |
14004 | higher offsets. | |
14005 | ||
14006 | (2) %lo()s with no matching %got() or %hi() are better than those | |
14007 | that already have a matching %got() or %hi(). | |
14008 | ||
14009 | (3) later %lo()s are better than earlier %lo()s. | |
14010 | ||
14011 | These rules are applied in order. | |
14012 | ||
14013 | (1) means, among other things, that %lo()s with identical offsets are | |
14014 | chosen if they exist. | |
14015 | ||
14016 | (2) means that we won't associate several high-part relocations with | |
14017 | the same low-part relocation unless there's no alternative. Having | |
14018 | several high parts for the same low part is a GNU extension; this rule | |
14019 | allows careful users to avoid it. | |
14020 | ||
14021 | (3) is purely cosmetic. mips_hi_fixup_list is is in reverse order, | |
14022 | with the last high-part relocation being at the front of the list. | |
14023 | It therefore makes sense to choose the last matching low-part | |
14024 | relocation, all other things being equal. It's also easier | |
14025 | to code that way. */ | |
252b5132 RH |
14026 | |
14027 | void | |
17a2f251 | 14028 | mips_frob_file (void) |
252b5132 RH |
14029 | { |
14030 | struct mips_hi_fixup *l; | |
35903be0 | 14031 | bfd_reloc_code_real_type looking_for_rtype = BFD_RELOC_UNUSED; |
252b5132 RH |
14032 | |
14033 | for (l = mips_hi_fixup_list; l != NULL; l = l->next) | |
14034 | { | |
14035 | segment_info_type *seginfo; | |
3b91255e RS |
14036 | bfd_boolean matched_lo_p; |
14037 | fixS **hi_pos, **lo_pos, **pos; | |
252b5132 | 14038 | |
9c2799c2 | 14039 | gas_assert (reloc_needs_lo_p (l->fixp->fx_r_type)); |
252b5132 | 14040 | |
5919d012 | 14041 | /* If a GOT16 relocation turns out to be against a global symbol, |
b886a2ab RS |
14042 | there isn't supposed to be a matching LO. Ignore %gots against |
14043 | constants; we'll report an error for those later. */ | |
738e5348 | 14044 | if (got16_reloc_p (l->fixp->fx_r_type) |
b886a2ab RS |
14045 | && !(l->fixp->fx_addsy |
14046 | && pic_need_relax (l->fixp->fx_addsy, l->seg))) | |
5919d012 RS |
14047 | continue; |
14048 | ||
14049 | /* Check quickly whether the next fixup happens to be a matching %lo. */ | |
14050 | if (fixup_has_matching_lo_p (l->fixp)) | |
252b5132 RH |
14051 | continue; |
14052 | ||
252b5132 | 14053 | seginfo = seg_info (l->seg); |
252b5132 | 14054 | |
3b91255e RS |
14055 | /* Set HI_POS to the position of this relocation in the chain. |
14056 | Set LO_POS to the position of the chosen low-part relocation. | |
14057 | MATCHED_LO_P is true on entry to the loop if *POS is a low-part | |
14058 | relocation that matches an immediately-preceding high-part | |
14059 | relocation. */ | |
14060 | hi_pos = NULL; | |
14061 | lo_pos = NULL; | |
14062 | matched_lo_p = FALSE; | |
738e5348 | 14063 | looking_for_rtype = matching_lo_reloc (l->fixp->fx_r_type); |
35903be0 | 14064 | |
3b91255e RS |
14065 | for (pos = &seginfo->fix_root; *pos != NULL; pos = &(*pos)->fx_next) |
14066 | { | |
14067 | if (*pos == l->fixp) | |
14068 | hi_pos = pos; | |
14069 | ||
35903be0 | 14070 | if ((*pos)->fx_r_type == looking_for_rtype |
30cfc97a | 14071 | && symbol_same_p ((*pos)->fx_addsy, l->fixp->fx_addsy) |
3b91255e RS |
14072 | && (*pos)->fx_offset >= l->fixp->fx_offset |
14073 | && (lo_pos == NULL | |
14074 | || (*pos)->fx_offset < (*lo_pos)->fx_offset | |
14075 | || (!matched_lo_p | |
14076 | && (*pos)->fx_offset == (*lo_pos)->fx_offset))) | |
14077 | lo_pos = pos; | |
14078 | ||
14079 | matched_lo_p = (reloc_needs_lo_p ((*pos)->fx_r_type) | |
14080 | && fixup_has_matching_lo_p (*pos)); | |
14081 | } | |
14082 | ||
14083 | /* If we found a match, remove the high-part relocation from its | |
14084 | current position and insert it before the low-part relocation. | |
14085 | Make the offsets match so that fixup_has_matching_lo_p() | |
14086 | will return true. | |
14087 | ||
14088 | We don't warn about unmatched high-part relocations since some | |
14089 | versions of gcc have been known to emit dead "lui ...%hi(...)" | |
14090 | instructions. */ | |
14091 | if (lo_pos != NULL) | |
14092 | { | |
14093 | l->fixp->fx_offset = (*lo_pos)->fx_offset; | |
14094 | if (l->fixp->fx_next != *lo_pos) | |
252b5132 | 14095 | { |
3b91255e RS |
14096 | *hi_pos = l->fixp->fx_next; |
14097 | l->fixp->fx_next = *lo_pos; | |
14098 | *lo_pos = l->fixp; | |
252b5132 | 14099 | } |
252b5132 RH |
14100 | } |
14101 | } | |
14102 | } | |
14103 | ||
252b5132 | 14104 | int |
17a2f251 | 14105 | mips_force_relocation (fixS *fixp) |
252b5132 | 14106 | { |
ae6063d4 | 14107 | if (generic_force_reloc (fixp)) |
252b5132 RH |
14108 | return 1; |
14109 | ||
df58fc94 RS |
14110 | /* We want to keep BFD_RELOC_MICROMIPS_*_PCREL_S1 relocation, |
14111 | so that the linker relaxation can update targets. */ | |
14112 | if (fixp->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1 | |
14113 | || fixp->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1 | |
14114 | || fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1) | |
14115 | return 1; | |
14116 | ||
3e722fb5 | 14117 | return 0; |
252b5132 RH |
14118 | } |
14119 | ||
b886a2ab RS |
14120 | /* Read the instruction associated with RELOC from BUF. */ |
14121 | ||
14122 | static unsigned int | |
14123 | read_reloc_insn (char *buf, bfd_reloc_code_real_type reloc) | |
14124 | { | |
14125 | if (mips16_reloc_p (reloc) || micromips_reloc_p (reloc)) | |
14126 | return read_compressed_insn (buf, 4); | |
14127 | else | |
14128 | return read_insn (buf); | |
14129 | } | |
14130 | ||
14131 | /* Write instruction INSN to BUF, given that it has been relocated | |
14132 | by RELOC. */ | |
14133 | ||
14134 | static void | |
14135 | write_reloc_insn (char *buf, bfd_reloc_code_real_type reloc, | |
14136 | unsigned long insn) | |
14137 | { | |
14138 | if (mips16_reloc_p (reloc) || micromips_reloc_p (reloc)) | |
14139 | write_compressed_insn (buf, insn, 4); | |
14140 | else | |
14141 | write_insn (buf, insn); | |
14142 | } | |
14143 | ||
252b5132 RH |
14144 | /* Apply a fixup to the object file. */ |
14145 | ||
94f592af | 14146 | void |
55cf6793 | 14147 | md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) |
252b5132 | 14148 | { |
4d68580a | 14149 | char *buf; |
b886a2ab | 14150 | unsigned long insn; |
a7ebbfdf | 14151 | reloc_howto_type *howto; |
252b5132 | 14152 | |
a7ebbfdf TS |
14153 | /* We ignore generic BFD relocations we don't know about. */ |
14154 | howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); | |
14155 | if (! howto) | |
14156 | return; | |
65551fa4 | 14157 | |
df58fc94 RS |
14158 | gas_assert (fixP->fx_size == 2 |
14159 | || fixP->fx_size == 4 | |
90ecf173 MR |
14160 | || fixP->fx_r_type == BFD_RELOC_16 |
14161 | || fixP->fx_r_type == BFD_RELOC_64 | |
14162 | || fixP->fx_r_type == BFD_RELOC_CTOR | |
14163 | || fixP->fx_r_type == BFD_RELOC_MIPS_SUB | |
df58fc94 | 14164 | || fixP->fx_r_type == BFD_RELOC_MICROMIPS_SUB |
90ecf173 MR |
14165 | || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT |
14166 | || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY | |
14167 | || fixP->fx_r_type == BFD_RELOC_MIPS_TLS_DTPREL64); | |
252b5132 | 14168 | |
4d68580a | 14169 | buf = fixP->fx_frag->fr_literal + fixP->fx_where; |
252b5132 | 14170 | |
df58fc94 RS |
14171 | gas_assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2 |
14172 | || fixP->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1 | |
14173 | || fixP->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1 | |
b47468a6 CM |
14174 | || fixP->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1 |
14175 | || fixP->fx_r_type == BFD_RELOC_32_PCREL); | |
b1dca8ee RS |
14176 | |
14177 | /* Don't treat parts of a composite relocation as done. There are two | |
14178 | reasons for this: | |
14179 | ||
14180 | (1) The second and third parts will be against 0 (RSS_UNDEF) but | |
14181 | should nevertheless be emitted if the first part is. | |
14182 | ||
14183 | (2) In normal usage, composite relocations are never assembly-time | |
14184 | constants. The easiest way of dealing with the pathological | |
14185 | exceptions is to generate a relocation against STN_UNDEF and | |
14186 | leave everything up to the linker. */ | |
3994f87e | 14187 | if (fixP->fx_addsy == NULL && !fixP->fx_pcrel && fixP->fx_tcbit == 0) |
252b5132 RH |
14188 | fixP->fx_done = 1; |
14189 | ||
14190 | switch (fixP->fx_r_type) | |
14191 | { | |
3f98094e DJ |
14192 | case BFD_RELOC_MIPS_TLS_GD: |
14193 | case BFD_RELOC_MIPS_TLS_LDM: | |
741d6ea8 JM |
14194 | case BFD_RELOC_MIPS_TLS_DTPREL32: |
14195 | case BFD_RELOC_MIPS_TLS_DTPREL64: | |
3f98094e DJ |
14196 | case BFD_RELOC_MIPS_TLS_DTPREL_HI16: |
14197 | case BFD_RELOC_MIPS_TLS_DTPREL_LO16: | |
14198 | case BFD_RELOC_MIPS_TLS_GOTTPREL: | |
d0f13682 CLT |
14199 | case BFD_RELOC_MIPS_TLS_TPREL32: |
14200 | case BFD_RELOC_MIPS_TLS_TPREL64: | |
3f98094e DJ |
14201 | case BFD_RELOC_MIPS_TLS_TPREL_HI16: |
14202 | case BFD_RELOC_MIPS_TLS_TPREL_LO16: | |
df58fc94 RS |
14203 | case BFD_RELOC_MICROMIPS_TLS_GD: |
14204 | case BFD_RELOC_MICROMIPS_TLS_LDM: | |
14205 | case BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16: | |
14206 | case BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16: | |
14207 | case BFD_RELOC_MICROMIPS_TLS_GOTTPREL: | |
14208 | case BFD_RELOC_MICROMIPS_TLS_TPREL_HI16: | |
14209 | case BFD_RELOC_MICROMIPS_TLS_TPREL_LO16: | |
d0f13682 CLT |
14210 | case BFD_RELOC_MIPS16_TLS_GD: |
14211 | case BFD_RELOC_MIPS16_TLS_LDM: | |
14212 | case BFD_RELOC_MIPS16_TLS_DTPREL_HI16: | |
14213 | case BFD_RELOC_MIPS16_TLS_DTPREL_LO16: | |
14214 | case BFD_RELOC_MIPS16_TLS_GOTTPREL: | |
14215 | case BFD_RELOC_MIPS16_TLS_TPREL_HI16: | |
14216 | case BFD_RELOC_MIPS16_TLS_TPREL_LO16: | |
b886a2ab RS |
14217 | if (!fixP->fx_addsy) |
14218 | { | |
14219 | as_bad_where (fixP->fx_file, fixP->fx_line, | |
14220 | _("TLS relocation against a constant")); | |
14221 | break; | |
14222 | } | |
3f98094e DJ |
14223 | S_SET_THREAD_LOCAL (fixP->fx_addsy); |
14224 | /* fall through */ | |
14225 | ||
252b5132 | 14226 | case BFD_RELOC_MIPS_JMP: |
e369bcce TS |
14227 | case BFD_RELOC_MIPS_SHIFT5: |
14228 | case BFD_RELOC_MIPS_SHIFT6: | |
14229 | case BFD_RELOC_MIPS_GOT_DISP: | |
14230 | case BFD_RELOC_MIPS_GOT_PAGE: | |
14231 | case BFD_RELOC_MIPS_GOT_OFST: | |
14232 | case BFD_RELOC_MIPS_SUB: | |
14233 | case BFD_RELOC_MIPS_INSERT_A: | |
14234 | case BFD_RELOC_MIPS_INSERT_B: | |
14235 | case BFD_RELOC_MIPS_DELETE: | |
14236 | case BFD_RELOC_MIPS_HIGHEST: | |
14237 | case BFD_RELOC_MIPS_HIGHER: | |
14238 | case BFD_RELOC_MIPS_SCN_DISP: | |
14239 | case BFD_RELOC_MIPS_REL16: | |
14240 | case BFD_RELOC_MIPS_RELGOT: | |
14241 | case BFD_RELOC_MIPS_JALR: | |
252b5132 RH |
14242 | case BFD_RELOC_HI16: |
14243 | case BFD_RELOC_HI16_S: | |
b886a2ab | 14244 | case BFD_RELOC_LO16: |
cdf6fd85 | 14245 | case BFD_RELOC_GPREL16: |
252b5132 RH |
14246 | case BFD_RELOC_MIPS_LITERAL: |
14247 | case BFD_RELOC_MIPS_CALL16: | |
14248 | case BFD_RELOC_MIPS_GOT16: | |
cdf6fd85 | 14249 | case BFD_RELOC_GPREL32: |
252b5132 RH |
14250 | case BFD_RELOC_MIPS_GOT_HI16: |
14251 | case BFD_RELOC_MIPS_GOT_LO16: | |
14252 | case BFD_RELOC_MIPS_CALL_HI16: | |
14253 | case BFD_RELOC_MIPS_CALL_LO16: | |
14254 | case BFD_RELOC_MIPS16_GPREL: | |
738e5348 RS |
14255 | case BFD_RELOC_MIPS16_GOT16: |
14256 | case BFD_RELOC_MIPS16_CALL16: | |
d6f16593 MR |
14257 | case BFD_RELOC_MIPS16_HI16: |
14258 | case BFD_RELOC_MIPS16_HI16_S: | |
b886a2ab | 14259 | case BFD_RELOC_MIPS16_LO16: |
252b5132 | 14260 | case BFD_RELOC_MIPS16_JMP: |
df58fc94 RS |
14261 | case BFD_RELOC_MICROMIPS_JMP: |
14262 | case BFD_RELOC_MICROMIPS_GOT_DISP: | |
14263 | case BFD_RELOC_MICROMIPS_GOT_PAGE: | |
14264 | case BFD_RELOC_MICROMIPS_GOT_OFST: | |
14265 | case BFD_RELOC_MICROMIPS_SUB: | |
14266 | case BFD_RELOC_MICROMIPS_HIGHEST: | |
14267 | case BFD_RELOC_MICROMIPS_HIGHER: | |
14268 | case BFD_RELOC_MICROMIPS_SCN_DISP: | |
14269 | case BFD_RELOC_MICROMIPS_JALR: | |
14270 | case BFD_RELOC_MICROMIPS_HI16: | |
14271 | case BFD_RELOC_MICROMIPS_HI16_S: | |
b886a2ab | 14272 | case BFD_RELOC_MICROMIPS_LO16: |
df58fc94 RS |
14273 | case BFD_RELOC_MICROMIPS_GPREL16: |
14274 | case BFD_RELOC_MICROMIPS_LITERAL: | |
14275 | case BFD_RELOC_MICROMIPS_CALL16: | |
14276 | case BFD_RELOC_MICROMIPS_GOT16: | |
14277 | case BFD_RELOC_MICROMIPS_GOT_HI16: | |
14278 | case BFD_RELOC_MICROMIPS_GOT_LO16: | |
14279 | case BFD_RELOC_MICROMIPS_CALL_HI16: | |
14280 | case BFD_RELOC_MICROMIPS_CALL_LO16: | |
067ec077 | 14281 | case BFD_RELOC_MIPS_EH: |
b886a2ab RS |
14282 | if (fixP->fx_done) |
14283 | { | |
14284 | offsetT value; | |
14285 | ||
14286 | if (calculate_reloc (fixP->fx_r_type, *valP, &value)) | |
14287 | { | |
14288 | insn = read_reloc_insn (buf, fixP->fx_r_type); | |
14289 | if (mips16_reloc_p (fixP->fx_r_type)) | |
14290 | insn |= mips16_immed_extend (value, 16); | |
14291 | else | |
14292 | insn |= (value & 0xffff); | |
14293 | write_reloc_insn (buf, fixP->fx_r_type, insn); | |
14294 | } | |
14295 | else | |
14296 | as_bad_where (fixP->fx_file, fixP->fx_line, | |
1661c76c | 14297 | _("unsupported constant in relocation")); |
b886a2ab | 14298 | } |
252b5132 RH |
14299 | break; |
14300 | ||
252b5132 RH |
14301 | case BFD_RELOC_64: |
14302 | /* This is handled like BFD_RELOC_32, but we output a sign | |
14303 | extended value if we are only 32 bits. */ | |
3e722fb5 | 14304 | if (fixP->fx_done) |
252b5132 RH |
14305 | { |
14306 | if (8 <= sizeof (valueT)) | |
4d68580a | 14307 | md_number_to_chars (buf, *valP, 8); |
252b5132 RH |
14308 | else |
14309 | { | |
a7ebbfdf | 14310 | valueT hiv; |
252b5132 | 14311 | |
a7ebbfdf | 14312 | if ((*valP & 0x80000000) != 0) |
252b5132 RH |
14313 | hiv = 0xffffffff; |
14314 | else | |
14315 | hiv = 0; | |
4d68580a RS |
14316 | md_number_to_chars (buf + (target_big_endian ? 4 : 0), *valP, 4); |
14317 | md_number_to_chars (buf + (target_big_endian ? 0 : 4), hiv, 4); | |
252b5132 RH |
14318 | } |
14319 | } | |
14320 | break; | |
14321 | ||
056350c6 | 14322 | case BFD_RELOC_RVA: |
252b5132 | 14323 | case BFD_RELOC_32: |
b47468a6 | 14324 | case BFD_RELOC_32_PCREL: |
252b5132 RH |
14325 | case BFD_RELOC_16: |
14326 | /* If we are deleting this reloc entry, we must fill in the | |
54f4ddb3 TS |
14327 | value now. This can happen if we have a .word which is not |
14328 | resolved when it appears but is later defined. */ | |
252b5132 | 14329 | if (fixP->fx_done) |
4d68580a | 14330 | md_number_to_chars (buf, *valP, fixP->fx_size); |
252b5132 RH |
14331 | break; |
14332 | ||
252b5132 | 14333 | case BFD_RELOC_16_PCREL_S2: |
a7ebbfdf | 14334 | if ((*valP & 0x3) != 0) |
cb56d3d3 | 14335 | as_bad_where (fixP->fx_file, fixP->fx_line, |
1661c76c | 14336 | _("branch to misaligned address (%lx)"), (long) *valP); |
cb56d3d3 | 14337 | |
54f4ddb3 TS |
14338 | /* We need to save the bits in the instruction since fixup_segment() |
14339 | might be deleting the relocation entry (i.e., a branch within | |
14340 | the current segment). */ | |
a7ebbfdf | 14341 | if (! fixP->fx_done) |
bb2d6cd7 | 14342 | break; |
252b5132 | 14343 | |
54f4ddb3 | 14344 | /* Update old instruction data. */ |
4d68580a | 14345 | insn = read_insn (buf); |
252b5132 | 14346 | |
a7ebbfdf TS |
14347 | if (*valP + 0x20000 <= 0x3ffff) |
14348 | { | |
14349 | insn |= (*valP >> 2) & 0xffff; | |
4d68580a | 14350 | write_insn (buf, insn); |
a7ebbfdf TS |
14351 | } |
14352 | else if (mips_pic == NO_PIC | |
14353 | && fixP->fx_done | |
14354 | && fixP->fx_frag->fr_address >= text_section->vma | |
14355 | && (fixP->fx_frag->fr_address | |
587aac4e | 14356 | < text_section->vma + bfd_get_section_size (text_section)) |
a7ebbfdf TS |
14357 | && ((insn & 0xffff0000) == 0x10000000 /* beq $0,$0 */ |
14358 | || (insn & 0xffff0000) == 0x04010000 /* bgez $0 */ | |
14359 | || (insn & 0xffff0000) == 0x04110000)) /* bgezal $0 */ | |
252b5132 RH |
14360 | { |
14361 | /* The branch offset is too large. If this is an | |
14362 | unconditional branch, and we are not generating PIC code, | |
14363 | we can convert it to an absolute jump instruction. */ | |
a7ebbfdf TS |
14364 | if ((insn & 0xffff0000) == 0x04110000) /* bgezal $0 */ |
14365 | insn = 0x0c000000; /* jal */ | |
252b5132 | 14366 | else |
a7ebbfdf TS |
14367 | insn = 0x08000000; /* j */ |
14368 | fixP->fx_r_type = BFD_RELOC_MIPS_JMP; | |
14369 | fixP->fx_done = 0; | |
14370 | fixP->fx_addsy = section_symbol (text_section); | |
14371 | *valP += md_pcrel_from (fixP); | |
4d68580a | 14372 | write_insn (buf, insn); |
a7ebbfdf TS |
14373 | } |
14374 | else | |
14375 | { | |
14376 | /* If we got here, we have branch-relaxation disabled, | |
14377 | and there's nothing we can do to fix this instruction | |
14378 | without turning it into a longer sequence. */ | |
14379 | as_bad_where (fixP->fx_file, fixP->fx_line, | |
1661c76c | 14380 | _("branch out of range")); |
252b5132 | 14381 | } |
252b5132 RH |
14382 | break; |
14383 | ||
df58fc94 RS |
14384 | case BFD_RELOC_MICROMIPS_7_PCREL_S1: |
14385 | case BFD_RELOC_MICROMIPS_10_PCREL_S1: | |
14386 | case BFD_RELOC_MICROMIPS_16_PCREL_S1: | |
14387 | /* We adjust the offset back to even. */ | |
14388 | if ((*valP & 0x1) != 0) | |
14389 | --(*valP); | |
14390 | ||
14391 | if (! fixP->fx_done) | |
14392 | break; | |
14393 | ||
14394 | /* Should never visit here, because we keep the relocation. */ | |
14395 | abort (); | |
14396 | break; | |
14397 | ||
252b5132 RH |
14398 | case BFD_RELOC_VTABLE_INHERIT: |
14399 | fixP->fx_done = 0; | |
14400 | if (fixP->fx_addsy | |
14401 | && !S_IS_DEFINED (fixP->fx_addsy) | |
14402 | && !S_IS_WEAK (fixP->fx_addsy)) | |
14403 | S_SET_WEAK (fixP->fx_addsy); | |
14404 | break; | |
14405 | ||
14406 | case BFD_RELOC_VTABLE_ENTRY: | |
14407 | fixP->fx_done = 0; | |
14408 | break; | |
14409 | ||
14410 | default: | |
b37df7c4 | 14411 | abort (); |
252b5132 | 14412 | } |
a7ebbfdf TS |
14413 | |
14414 | /* Remember value for tc_gen_reloc. */ | |
14415 | fixP->fx_addnumber = *valP; | |
252b5132 RH |
14416 | } |
14417 | ||
252b5132 | 14418 | static symbolS * |
17a2f251 | 14419 | get_symbol (void) |
252b5132 RH |
14420 | { |
14421 | int c; | |
14422 | char *name; | |
14423 | symbolS *p; | |
14424 | ||
14425 | name = input_line_pointer; | |
14426 | c = get_symbol_end (); | |
14427 | p = (symbolS *) symbol_find_or_make (name); | |
14428 | *input_line_pointer = c; | |
14429 | return p; | |
14430 | } | |
14431 | ||
742a56fe RS |
14432 | /* Align the current frag to a given power of two. If a particular |
14433 | fill byte should be used, FILL points to an integer that contains | |
14434 | that byte, otherwise FILL is null. | |
14435 | ||
462427c4 RS |
14436 | This function used to have the comment: |
14437 | ||
14438 | The MIPS assembler also automatically adjusts any preceding label. | |
14439 | ||
14440 | The implementation therefore applied the adjustment to a maximum of | |
14441 | one label. However, other label adjustments are applied to batches | |
14442 | of labels, and adjusting just one caused problems when new labels | |
14443 | were added for the sake of debugging or unwind information. | |
14444 | We therefore adjust all preceding labels (given as LABELS) instead. */ | |
252b5132 RH |
14445 | |
14446 | static void | |
462427c4 | 14447 | mips_align (int to, int *fill, struct insn_label_list *labels) |
252b5132 | 14448 | { |
7d10b47d | 14449 | mips_emit_delays (); |
df58fc94 | 14450 | mips_record_compressed_mode (); |
742a56fe RS |
14451 | if (fill == NULL && subseg_text_p (now_seg)) |
14452 | frag_align_code (to, 0); | |
14453 | else | |
14454 | frag_align (to, fill ? *fill : 0, 0); | |
252b5132 | 14455 | record_alignment (now_seg, to); |
462427c4 | 14456 | mips_move_labels (labels, FALSE); |
252b5132 RH |
14457 | } |
14458 | ||
14459 | /* Align to a given power of two. .align 0 turns off the automatic | |
14460 | alignment used by the data creating pseudo-ops. */ | |
14461 | ||
14462 | static void | |
17a2f251 | 14463 | s_align (int x ATTRIBUTE_UNUSED) |
252b5132 | 14464 | { |
742a56fe | 14465 | int temp, fill_value, *fill_ptr; |
49954fb4 | 14466 | long max_alignment = 28; |
252b5132 | 14467 | |
54f4ddb3 | 14468 | /* o Note that the assembler pulls down any immediately preceding label |
252b5132 | 14469 | to the aligned address. |
54f4ddb3 | 14470 | o It's not documented but auto alignment is reinstated by |
252b5132 | 14471 | a .align pseudo instruction. |
54f4ddb3 | 14472 | o Note also that after auto alignment is turned off the mips assembler |
252b5132 | 14473 | issues an error on attempt to assemble an improperly aligned data item. |
54f4ddb3 | 14474 | We don't. */ |
252b5132 RH |
14475 | |
14476 | temp = get_absolute_expression (); | |
14477 | if (temp > max_alignment) | |
1661c76c | 14478 | as_bad (_("alignment too large, %d assumed"), temp = max_alignment); |
252b5132 RH |
14479 | else if (temp < 0) |
14480 | { | |
1661c76c | 14481 | as_warn (_("alignment negative, 0 assumed")); |
252b5132 RH |
14482 | temp = 0; |
14483 | } | |
14484 | if (*input_line_pointer == ',') | |
14485 | { | |
f9419b05 | 14486 | ++input_line_pointer; |
742a56fe RS |
14487 | fill_value = get_absolute_expression (); |
14488 | fill_ptr = &fill_value; | |
252b5132 RH |
14489 | } |
14490 | else | |
742a56fe | 14491 | fill_ptr = 0; |
252b5132 RH |
14492 | if (temp) |
14493 | { | |
a8dbcb85 TS |
14494 | segment_info_type *si = seg_info (now_seg); |
14495 | struct insn_label_list *l = si->label_list; | |
54f4ddb3 | 14496 | /* Auto alignment should be switched on by next section change. */ |
252b5132 | 14497 | auto_align = 1; |
462427c4 | 14498 | mips_align (temp, fill_ptr, l); |
252b5132 RH |
14499 | } |
14500 | else | |
14501 | { | |
14502 | auto_align = 0; | |
14503 | } | |
14504 | ||
14505 | demand_empty_rest_of_line (); | |
14506 | } | |
14507 | ||
252b5132 | 14508 | static void |
17a2f251 | 14509 | s_change_sec (int sec) |
252b5132 RH |
14510 | { |
14511 | segT seg; | |
14512 | ||
252b5132 RH |
14513 | /* The ELF backend needs to know that we are changing sections, so |
14514 | that .previous works correctly. We could do something like check | |
b6ff326e | 14515 | for an obj_section_change_hook macro, but that might be confusing |
252b5132 RH |
14516 | as it would not be appropriate to use it in the section changing |
14517 | functions in read.c, since obj-elf.c intercepts those. FIXME: | |
14518 | This should be cleaner, somehow. */ | |
f3ded42a | 14519 | obj_elf_section_change_hook (); |
252b5132 | 14520 | |
7d10b47d | 14521 | mips_emit_delays (); |
6a32d874 | 14522 | |
252b5132 RH |
14523 | switch (sec) |
14524 | { | |
14525 | case 't': | |
14526 | s_text (0); | |
14527 | break; | |
14528 | case 'd': | |
14529 | s_data (0); | |
14530 | break; | |
14531 | case 'b': | |
14532 | subseg_set (bss_section, (subsegT) get_absolute_expression ()); | |
14533 | demand_empty_rest_of_line (); | |
14534 | break; | |
14535 | ||
14536 | case 'r': | |
4d0d148d TS |
14537 | seg = subseg_new (RDATA_SECTION_NAME, |
14538 | (subsegT) get_absolute_expression ()); | |
f3ded42a RS |
14539 | bfd_set_section_flags (stdoutput, seg, (SEC_ALLOC | SEC_LOAD |
14540 | | SEC_READONLY | SEC_RELOC | |
14541 | | SEC_DATA)); | |
14542 | if (strncmp (TARGET_OS, "elf", 3) != 0) | |
14543 | record_alignment (seg, 4); | |
4d0d148d | 14544 | demand_empty_rest_of_line (); |
252b5132 RH |
14545 | break; |
14546 | ||
14547 | case 's': | |
4d0d148d | 14548 | seg = subseg_new (".sdata", (subsegT) get_absolute_expression ()); |
f3ded42a RS |
14549 | bfd_set_section_flags (stdoutput, seg, |
14550 | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_DATA); | |
14551 | if (strncmp (TARGET_OS, "elf", 3) != 0) | |
14552 | record_alignment (seg, 4); | |
4d0d148d TS |
14553 | demand_empty_rest_of_line (); |
14554 | break; | |
998b3c36 MR |
14555 | |
14556 | case 'B': | |
14557 | seg = subseg_new (".sbss", (subsegT) get_absolute_expression ()); | |
f3ded42a RS |
14558 | bfd_set_section_flags (stdoutput, seg, SEC_ALLOC); |
14559 | if (strncmp (TARGET_OS, "elf", 3) != 0) | |
14560 | record_alignment (seg, 4); | |
998b3c36 MR |
14561 | demand_empty_rest_of_line (); |
14562 | break; | |
252b5132 RH |
14563 | } |
14564 | ||
14565 | auto_align = 1; | |
14566 | } | |
b34976b6 | 14567 | |
cca86cc8 | 14568 | void |
17a2f251 | 14569 | s_change_section (int ignore ATTRIBUTE_UNUSED) |
cca86cc8 | 14570 | { |
cca86cc8 SC |
14571 | char *section_name; |
14572 | char c; | |
684022ea | 14573 | char next_c = 0; |
cca86cc8 SC |
14574 | int section_type; |
14575 | int section_flag; | |
14576 | int section_entry_size; | |
14577 | int section_alignment; | |
b34976b6 | 14578 | |
cca86cc8 SC |
14579 | section_name = input_line_pointer; |
14580 | c = get_symbol_end (); | |
a816d1ed AO |
14581 | if (c) |
14582 | next_c = *(input_line_pointer + 1); | |
cca86cc8 | 14583 | |
4cf0dd0d TS |
14584 | /* Do we have .section Name<,"flags">? */ |
14585 | if (c != ',' || (c == ',' && next_c == '"')) | |
cca86cc8 | 14586 | { |
4cf0dd0d TS |
14587 | /* just after name is now '\0'. */ |
14588 | *input_line_pointer = c; | |
cca86cc8 SC |
14589 | input_line_pointer = section_name; |
14590 | obj_elf_section (ignore); | |
14591 | return; | |
14592 | } | |
14593 | input_line_pointer++; | |
14594 | ||
14595 | /* Do we have .section Name<,type><,flag><,entry_size><,alignment> */ | |
14596 | if (c == ',') | |
14597 | section_type = get_absolute_expression (); | |
14598 | else | |
14599 | section_type = 0; | |
14600 | if (*input_line_pointer++ == ',') | |
14601 | section_flag = get_absolute_expression (); | |
14602 | else | |
14603 | section_flag = 0; | |
14604 | if (*input_line_pointer++ == ',') | |
14605 | section_entry_size = get_absolute_expression (); | |
14606 | else | |
14607 | section_entry_size = 0; | |
14608 | if (*input_line_pointer++ == ',') | |
14609 | section_alignment = get_absolute_expression (); | |
14610 | else | |
14611 | section_alignment = 0; | |
87975d2a AM |
14612 | /* FIXME: really ignore? */ |
14613 | (void) section_alignment; | |
cca86cc8 | 14614 | |
a816d1ed AO |
14615 | section_name = xstrdup (section_name); |
14616 | ||
8ab8a5c8 RS |
14617 | /* When using the generic form of .section (as implemented by obj-elf.c), |
14618 | there's no way to set the section type to SHT_MIPS_DWARF. Users have | |
14619 | traditionally had to fall back on the more common @progbits instead. | |
14620 | ||
14621 | There's nothing really harmful in this, since bfd will correct | |
14622 | SHT_PROGBITS to SHT_MIPS_DWARF before writing out the file. But it | |
708587a4 | 14623 | means that, for backwards compatibility, the special_section entries |
8ab8a5c8 RS |
14624 | for dwarf sections must use SHT_PROGBITS rather than SHT_MIPS_DWARF. |
14625 | ||
14626 | Even so, we shouldn't force users of the MIPS .section syntax to | |
14627 | incorrectly label the sections as SHT_PROGBITS. The best compromise | |
14628 | seems to be to map SHT_MIPS_DWARF to SHT_PROGBITS before calling the | |
14629 | generic type-checking code. */ | |
14630 | if (section_type == SHT_MIPS_DWARF) | |
14631 | section_type = SHT_PROGBITS; | |
14632 | ||
cca86cc8 SC |
14633 | obj_elf_change_section (section_name, section_type, section_flag, |
14634 | section_entry_size, 0, 0, 0); | |
a816d1ed AO |
14635 | |
14636 | if (now_seg->name != section_name) | |
14637 | free (section_name); | |
cca86cc8 | 14638 | } |
252b5132 RH |
14639 | |
14640 | void | |
17a2f251 | 14641 | mips_enable_auto_align (void) |
252b5132 RH |
14642 | { |
14643 | auto_align = 1; | |
14644 | } | |
14645 | ||
14646 | static void | |
17a2f251 | 14647 | s_cons (int log_size) |
252b5132 | 14648 | { |
a8dbcb85 TS |
14649 | segment_info_type *si = seg_info (now_seg); |
14650 | struct insn_label_list *l = si->label_list; | |
252b5132 | 14651 | |
7d10b47d | 14652 | mips_emit_delays (); |
252b5132 | 14653 | if (log_size > 0 && auto_align) |
462427c4 | 14654 | mips_align (log_size, 0, l); |
252b5132 | 14655 | cons (1 << log_size); |
a1facbec | 14656 | mips_clear_insn_labels (); |
252b5132 RH |
14657 | } |
14658 | ||
14659 | static void | |
17a2f251 | 14660 | s_float_cons (int type) |
252b5132 | 14661 | { |
a8dbcb85 TS |
14662 | segment_info_type *si = seg_info (now_seg); |
14663 | struct insn_label_list *l = si->label_list; | |
252b5132 | 14664 | |
7d10b47d | 14665 | mips_emit_delays (); |
252b5132 RH |
14666 | |
14667 | if (auto_align) | |
49309057 ILT |
14668 | { |
14669 | if (type == 'd') | |
462427c4 | 14670 | mips_align (3, 0, l); |
49309057 | 14671 | else |
462427c4 | 14672 | mips_align (2, 0, l); |
49309057 | 14673 | } |
252b5132 | 14674 | |
252b5132 | 14675 | float_cons (type); |
a1facbec | 14676 | mips_clear_insn_labels (); |
252b5132 RH |
14677 | } |
14678 | ||
14679 | /* Handle .globl. We need to override it because on Irix 5 you are | |
14680 | permitted to say | |
14681 | .globl foo .text | |
14682 | where foo is an undefined symbol, to mean that foo should be | |
14683 | considered to be the address of a function. */ | |
14684 | ||
14685 | static void | |
17a2f251 | 14686 | s_mips_globl (int x ATTRIBUTE_UNUSED) |
252b5132 RH |
14687 | { |
14688 | char *name; | |
14689 | int c; | |
14690 | symbolS *symbolP; | |
14691 | flagword flag; | |
14692 | ||
8a06b769 | 14693 | do |
252b5132 | 14694 | { |
8a06b769 | 14695 | name = input_line_pointer; |
252b5132 | 14696 | c = get_symbol_end (); |
8a06b769 TS |
14697 | symbolP = symbol_find_or_make (name); |
14698 | S_SET_EXTERNAL (symbolP); | |
14699 | ||
252b5132 | 14700 | *input_line_pointer = c; |
8a06b769 | 14701 | SKIP_WHITESPACE (); |
252b5132 | 14702 | |
8a06b769 TS |
14703 | /* On Irix 5, every global symbol that is not explicitly labelled as |
14704 | being a function is apparently labelled as being an object. */ | |
14705 | flag = BSF_OBJECT; | |
252b5132 | 14706 | |
8a06b769 TS |
14707 | if (!is_end_of_line[(unsigned char) *input_line_pointer] |
14708 | && (*input_line_pointer != ',')) | |
14709 | { | |
14710 | char *secname; | |
14711 | asection *sec; | |
14712 | ||
14713 | secname = input_line_pointer; | |
14714 | c = get_symbol_end (); | |
14715 | sec = bfd_get_section_by_name (stdoutput, secname); | |
14716 | if (sec == NULL) | |
14717 | as_bad (_("%s: no such section"), secname); | |
14718 | *input_line_pointer = c; | |
14719 | ||
14720 | if (sec != NULL && (sec->flags & SEC_CODE) != 0) | |
14721 | flag = BSF_FUNCTION; | |
14722 | } | |
14723 | ||
14724 | symbol_get_bfdsym (symbolP)->flags |= flag; | |
14725 | ||
14726 | c = *input_line_pointer; | |
14727 | if (c == ',') | |
14728 | { | |
14729 | input_line_pointer++; | |
14730 | SKIP_WHITESPACE (); | |
14731 | if (is_end_of_line[(unsigned char) *input_line_pointer]) | |
14732 | c = '\n'; | |
14733 | } | |
14734 | } | |
14735 | while (c == ','); | |
252b5132 | 14736 | |
252b5132 RH |
14737 | demand_empty_rest_of_line (); |
14738 | } | |
14739 | ||
14740 | static void | |
17a2f251 | 14741 | s_option (int x ATTRIBUTE_UNUSED) |
252b5132 RH |
14742 | { |
14743 | char *opt; | |
14744 | char c; | |
14745 | ||
14746 | opt = input_line_pointer; | |
14747 | c = get_symbol_end (); | |
14748 | ||
14749 | if (*opt == 'O') | |
14750 | { | |
14751 | /* FIXME: What does this mean? */ | |
14752 | } | |
14753 | else if (strncmp (opt, "pic", 3) == 0) | |
14754 | { | |
14755 | int i; | |
14756 | ||
14757 | i = atoi (opt + 3); | |
14758 | if (i == 0) | |
14759 | mips_pic = NO_PIC; | |
14760 | else if (i == 2) | |
143d77c5 | 14761 | { |
8b828383 | 14762 | mips_pic = SVR4_PIC; |
143d77c5 EC |
14763 | mips_abicalls = TRUE; |
14764 | } | |
252b5132 RH |
14765 | else |
14766 | as_bad (_(".option pic%d not supported"), i); | |
14767 | ||
4d0d148d | 14768 | if (mips_pic == SVR4_PIC) |
252b5132 RH |
14769 | { |
14770 | if (g_switch_seen && g_switch_value != 0) | |
14771 | as_warn (_("-G may not be used with SVR4 PIC code")); | |
14772 | g_switch_value = 0; | |
14773 | bfd_set_gp_size (stdoutput, 0); | |
14774 | } | |
14775 | } | |
14776 | else | |
1661c76c | 14777 | as_warn (_("unrecognized option \"%s\""), opt); |
252b5132 RH |
14778 | |
14779 | *input_line_pointer = c; | |
14780 | demand_empty_rest_of_line (); | |
14781 | } | |
14782 | ||
14783 | /* This structure is used to hold a stack of .set values. */ | |
14784 | ||
e972090a NC |
14785 | struct mips_option_stack |
14786 | { | |
252b5132 RH |
14787 | struct mips_option_stack *next; |
14788 | struct mips_set_options options; | |
14789 | }; | |
14790 | ||
14791 | static struct mips_option_stack *mips_opts_stack; | |
14792 | ||
14793 | /* Handle the .set pseudo-op. */ | |
14794 | ||
14795 | static void | |
17a2f251 | 14796 | s_mipsset (int x ATTRIBUTE_UNUSED) |
252b5132 RH |
14797 | { |
14798 | char *name = input_line_pointer, ch; | |
c6278170 | 14799 | const struct mips_ase *ase; |
252b5132 RH |
14800 | |
14801 | while (!is_end_of_line[(unsigned char) *input_line_pointer]) | |
f9419b05 | 14802 | ++input_line_pointer; |
252b5132 RH |
14803 | ch = *input_line_pointer; |
14804 | *input_line_pointer = '\0'; | |
14805 | ||
14806 | if (strcmp (name, "reorder") == 0) | |
14807 | { | |
7d10b47d RS |
14808 | if (mips_opts.noreorder) |
14809 | end_noreorder (); | |
252b5132 RH |
14810 | } |
14811 | else if (strcmp (name, "noreorder") == 0) | |
14812 | { | |
7d10b47d RS |
14813 | if (!mips_opts.noreorder) |
14814 | start_noreorder (); | |
252b5132 | 14815 | } |
741fe287 MR |
14816 | else if (strncmp (name, "at=", 3) == 0) |
14817 | { | |
14818 | char *s = name + 3; | |
14819 | ||
14820 | if (!reg_lookup (&s, RTYPE_NUM | RTYPE_GP, &mips_opts.at)) | |
1661c76c | 14821 | as_bad (_("unrecognized register name `%s'"), s); |
741fe287 | 14822 | } |
252b5132 RH |
14823 | else if (strcmp (name, "at") == 0) |
14824 | { | |
741fe287 | 14825 | mips_opts.at = ATREG; |
252b5132 RH |
14826 | } |
14827 | else if (strcmp (name, "noat") == 0) | |
14828 | { | |
741fe287 | 14829 | mips_opts.at = ZERO; |
252b5132 RH |
14830 | } |
14831 | else if (strcmp (name, "macro") == 0) | |
14832 | { | |
14833 | mips_opts.warn_about_macros = 0; | |
14834 | } | |
14835 | else if (strcmp (name, "nomacro") == 0) | |
14836 | { | |
14837 | if (mips_opts.noreorder == 0) | |
14838 | as_bad (_("`noreorder' must be set before `nomacro'")); | |
14839 | mips_opts.warn_about_macros = 1; | |
14840 | } | |
14841 | else if (strcmp (name, "move") == 0 || strcmp (name, "novolatile") == 0) | |
14842 | { | |
14843 | mips_opts.nomove = 0; | |
14844 | } | |
14845 | else if (strcmp (name, "nomove") == 0 || strcmp (name, "volatile") == 0) | |
14846 | { | |
14847 | mips_opts.nomove = 1; | |
14848 | } | |
14849 | else if (strcmp (name, "bopt") == 0) | |
14850 | { | |
14851 | mips_opts.nobopt = 0; | |
14852 | } | |
14853 | else if (strcmp (name, "nobopt") == 0) | |
14854 | { | |
14855 | mips_opts.nobopt = 1; | |
14856 | } | |
ad3fea08 TS |
14857 | else if (strcmp (name, "gp=default") == 0) |
14858 | mips_opts.gp32 = file_mips_gp32; | |
14859 | else if (strcmp (name, "gp=32") == 0) | |
14860 | mips_opts.gp32 = 1; | |
14861 | else if (strcmp (name, "gp=64") == 0) | |
14862 | { | |
14863 | if (!ISA_HAS_64BIT_REGS (mips_opts.isa)) | |
20203fb9 | 14864 | as_warn (_("%s isa does not support 64-bit registers"), |
ad3fea08 TS |
14865 | mips_cpu_info_from_isa (mips_opts.isa)->name); |
14866 | mips_opts.gp32 = 0; | |
14867 | } | |
14868 | else if (strcmp (name, "fp=default") == 0) | |
14869 | mips_opts.fp32 = file_mips_fp32; | |
14870 | else if (strcmp (name, "fp=32") == 0) | |
14871 | mips_opts.fp32 = 1; | |
14872 | else if (strcmp (name, "fp=64") == 0) | |
14873 | { | |
14874 | if (!ISA_HAS_64BIT_FPRS (mips_opts.isa)) | |
20203fb9 | 14875 | as_warn (_("%s isa does not support 64-bit floating point registers"), |
ad3fea08 TS |
14876 | mips_cpu_info_from_isa (mips_opts.isa)->name); |
14877 | mips_opts.fp32 = 0; | |
14878 | } | |
037b32b9 AN |
14879 | else if (strcmp (name, "softfloat") == 0) |
14880 | mips_opts.soft_float = 1; | |
14881 | else if (strcmp (name, "hardfloat") == 0) | |
14882 | mips_opts.soft_float = 0; | |
14883 | else if (strcmp (name, "singlefloat") == 0) | |
14884 | mips_opts.single_float = 1; | |
14885 | else if (strcmp (name, "doublefloat") == 0) | |
14886 | mips_opts.single_float = 0; | |
252b5132 RH |
14887 | else if (strcmp (name, "mips16") == 0 |
14888 | || strcmp (name, "MIPS-16") == 0) | |
df58fc94 RS |
14889 | { |
14890 | if (mips_opts.micromips == 1) | |
14891 | as_fatal (_("`mips16' cannot be used with `micromips'")); | |
14892 | mips_opts.mips16 = 1; | |
14893 | } | |
252b5132 RH |
14894 | else if (strcmp (name, "nomips16") == 0 |
14895 | || strcmp (name, "noMIPS-16") == 0) | |
14896 | mips_opts.mips16 = 0; | |
df58fc94 RS |
14897 | else if (strcmp (name, "micromips") == 0) |
14898 | { | |
14899 | if (mips_opts.mips16 == 1) | |
14900 | as_fatal (_("`micromips' cannot be used with `mips16'")); | |
14901 | mips_opts.micromips = 1; | |
14902 | } | |
14903 | else if (strcmp (name, "nomicromips") == 0) | |
14904 | mips_opts.micromips = 0; | |
c6278170 RS |
14905 | else if (name[0] == 'n' |
14906 | && name[1] == 'o' | |
14907 | && (ase = mips_lookup_ase (name + 2))) | |
14908 | mips_set_ase (ase, FALSE); | |
14909 | else if ((ase = mips_lookup_ase (name))) | |
14910 | mips_set_ase (ase, TRUE); | |
1a2c1fad | 14911 | else if (strncmp (name, "mips", 4) == 0 || strncmp (name, "arch=", 5) == 0) |
252b5132 | 14912 | { |
af7ee8bf | 14913 | int reset = 0; |
252b5132 | 14914 | |
1a2c1fad CD |
14915 | /* Permit the user to change the ISA and architecture on the fly. |
14916 | Needless to say, misuse can cause serious problems. */ | |
81a21e38 | 14917 | if (strcmp (name, "mips0") == 0 || strcmp (name, "arch=default") == 0) |
af7ee8bf CD |
14918 | { |
14919 | reset = 1; | |
14920 | mips_opts.isa = file_mips_isa; | |
1a2c1fad | 14921 | mips_opts.arch = file_mips_arch; |
1a2c1fad CD |
14922 | } |
14923 | else if (strncmp (name, "arch=", 5) == 0) | |
14924 | { | |
14925 | const struct mips_cpu_info *p; | |
14926 | ||
14927 | p = mips_parse_cpu("internal use", name + 5); | |
14928 | if (!p) | |
14929 | as_bad (_("unknown architecture %s"), name + 5); | |
14930 | else | |
14931 | { | |
14932 | mips_opts.arch = p->cpu; | |
14933 | mips_opts.isa = p->isa; | |
14934 | } | |
14935 | } | |
81a21e38 TS |
14936 | else if (strncmp (name, "mips", 4) == 0) |
14937 | { | |
14938 | const struct mips_cpu_info *p; | |
14939 | ||
14940 | p = mips_parse_cpu("internal use", name); | |
14941 | if (!p) | |
14942 | as_bad (_("unknown ISA level %s"), name + 4); | |
14943 | else | |
14944 | { | |
14945 | mips_opts.arch = p->cpu; | |
14946 | mips_opts.isa = p->isa; | |
14947 | } | |
14948 | } | |
af7ee8bf | 14949 | else |
81a21e38 | 14950 | as_bad (_("unknown ISA or architecture %s"), name); |
af7ee8bf CD |
14951 | |
14952 | switch (mips_opts.isa) | |
98d3f06f KH |
14953 | { |
14954 | case 0: | |
98d3f06f | 14955 | break; |
af7ee8bf CD |
14956 | case ISA_MIPS1: |
14957 | case ISA_MIPS2: | |
14958 | case ISA_MIPS32: | |
14959 | case ISA_MIPS32R2: | |
98d3f06f KH |
14960 | mips_opts.gp32 = 1; |
14961 | mips_opts.fp32 = 1; | |
14962 | break; | |
af7ee8bf CD |
14963 | case ISA_MIPS3: |
14964 | case ISA_MIPS4: | |
14965 | case ISA_MIPS5: | |
14966 | case ISA_MIPS64: | |
5f74bc13 | 14967 | case ISA_MIPS64R2: |
98d3f06f | 14968 | mips_opts.gp32 = 0; |
e407c74b NC |
14969 | if (mips_opts.arch == CPU_R5900) |
14970 | { | |
14971 | mips_opts.fp32 = 1; | |
14972 | } | |
14973 | else | |
14974 | { | |
98d3f06f | 14975 | mips_opts.fp32 = 0; |
e407c74b | 14976 | } |
98d3f06f KH |
14977 | break; |
14978 | default: | |
14979 | as_bad (_("unknown ISA level %s"), name + 4); | |
14980 | break; | |
14981 | } | |
af7ee8bf | 14982 | if (reset) |
98d3f06f | 14983 | { |
af7ee8bf CD |
14984 | mips_opts.gp32 = file_mips_gp32; |
14985 | mips_opts.fp32 = file_mips_fp32; | |
98d3f06f | 14986 | } |
252b5132 RH |
14987 | } |
14988 | else if (strcmp (name, "autoextend") == 0) | |
14989 | mips_opts.noautoextend = 0; | |
14990 | else if (strcmp (name, "noautoextend") == 0) | |
14991 | mips_opts.noautoextend = 1; | |
833794fc MR |
14992 | else if (strcmp (name, "insn32") == 0) |
14993 | mips_opts.insn32 = TRUE; | |
14994 | else if (strcmp (name, "noinsn32") == 0) | |
14995 | mips_opts.insn32 = FALSE; | |
252b5132 RH |
14996 | else if (strcmp (name, "push") == 0) |
14997 | { | |
14998 | struct mips_option_stack *s; | |
14999 | ||
15000 | s = (struct mips_option_stack *) xmalloc (sizeof *s); | |
15001 | s->next = mips_opts_stack; | |
15002 | s->options = mips_opts; | |
15003 | mips_opts_stack = s; | |
15004 | } | |
15005 | else if (strcmp (name, "pop") == 0) | |
15006 | { | |
15007 | struct mips_option_stack *s; | |
15008 | ||
15009 | s = mips_opts_stack; | |
15010 | if (s == NULL) | |
15011 | as_bad (_(".set pop with no .set push")); | |
15012 | else | |
15013 | { | |
15014 | /* If we're changing the reorder mode we need to handle | |
15015 | delay slots correctly. */ | |
15016 | if (s->options.noreorder && ! mips_opts.noreorder) | |
7d10b47d | 15017 | start_noreorder (); |
252b5132 | 15018 | else if (! s->options.noreorder && mips_opts.noreorder) |
7d10b47d | 15019 | end_noreorder (); |
252b5132 RH |
15020 | |
15021 | mips_opts = s->options; | |
15022 | mips_opts_stack = s->next; | |
15023 | free (s); | |
15024 | } | |
15025 | } | |
aed1a261 RS |
15026 | else if (strcmp (name, "sym32") == 0) |
15027 | mips_opts.sym32 = TRUE; | |
15028 | else if (strcmp (name, "nosym32") == 0) | |
15029 | mips_opts.sym32 = FALSE; | |
e6559e01 JM |
15030 | else if (strchr (name, ',')) |
15031 | { | |
15032 | /* Generic ".set" directive; use the generic handler. */ | |
15033 | *input_line_pointer = ch; | |
15034 | input_line_pointer = name; | |
15035 | s_set (0); | |
15036 | return; | |
15037 | } | |
252b5132 RH |
15038 | else |
15039 | { | |
1661c76c | 15040 | as_warn (_("tried to set unrecognized symbol: %s\n"), name); |
252b5132 | 15041 | } |
c6278170 | 15042 | mips_check_isa_supports_ases (); |
252b5132 RH |
15043 | *input_line_pointer = ch; |
15044 | demand_empty_rest_of_line (); | |
15045 | } | |
15046 | ||
15047 | /* Handle the .abicalls pseudo-op. I believe this is equivalent to | |
15048 | .option pic2. It means to generate SVR4 PIC calls. */ | |
15049 | ||
15050 | static void | |
17a2f251 | 15051 | s_abicalls (int ignore ATTRIBUTE_UNUSED) |
252b5132 RH |
15052 | { |
15053 | mips_pic = SVR4_PIC; | |
143d77c5 | 15054 | mips_abicalls = TRUE; |
4d0d148d TS |
15055 | |
15056 | if (g_switch_seen && g_switch_value != 0) | |
15057 | as_warn (_("-G may not be used with SVR4 PIC code")); | |
15058 | g_switch_value = 0; | |
15059 | ||
252b5132 RH |
15060 | bfd_set_gp_size (stdoutput, 0); |
15061 | demand_empty_rest_of_line (); | |
15062 | } | |
15063 | ||
15064 | /* Handle the .cpload pseudo-op. This is used when generating SVR4 | |
15065 | PIC code. It sets the $gp register for the function based on the | |
15066 | function address, which is in the register named in the argument. | |
15067 | This uses a relocation against _gp_disp, which is handled specially | |
15068 | by the linker. The result is: | |
15069 | lui $gp,%hi(_gp_disp) | |
15070 | addiu $gp,$gp,%lo(_gp_disp) | |
15071 | addu $gp,$gp,.cpload argument | |
aa6975fb ILT |
15072 | The .cpload argument is normally $25 == $t9. |
15073 | ||
15074 | The -mno-shared option changes this to: | |
bbe506e8 TS |
15075 | lui $gp,%hi(__gnu_local_gp) |
15076 | addiu $gp,$gp,%lo(__gnu_local_gp) | |
aa6975fb ILT |
15077 | and the argument is ignored. This saves an instruction, but the |
15078 | resulting code is not position independent; it uses an absolute | |
bbe506e8 TS |
15079 | address for __gnu_local_gp. Thus code assembled with -mno-shared |
15080 | can go into an ordinary executable, but not into a shared library. */ | |
252b5132 RH |
15081 | |
15082 | static void | |
17a2f251 | 15083 | s_cpload (int ignore ATTRIBUTE_UNUSED) |
252b5132 RH |
15084 | { |
15085 | expressionS ex; | |
aa6975fb ILT |
15086 | int reg; |
15087 | int in_shared; | |
252b5132 | 15088 | |
6478892d TS |
15089 | /* If we are not generating SVR4 PIC code, or if this is NewABI code, |
15090 | .cpload is ignored. */ | |
15091 | if (mips_pic != SVR4_PIC || HAVE_NEWABI) | |
252b5132 RH |
15092 | { |
15093 | s_ignore (0); | |
15094 | return; | |
15095 | } | |
15096 | ||
a276b80c MR |
15097 | if (mips_opts.mips16) |
15098 | { | |
15099 | as_bad (_("%s not supported in MIPS16 mode"), ".cpload"); | |
15100 | ignore_rest_of_line (); | |
15101 | return; | |
15102 | } | |
15103 | ||
d3ecfc59 | 15104 | /* .cpload should be in a .set noreorder section. */ |
252b5132 RH |
15105 | if (mips_opts.noreorder == 0) |
15106 | as_warn (_(".cpload not in noreorder section")); | |
15107 | ||
aa6975fb ILT |
15108 | reg = tc_get_register (0); |
15109 | ||
15110 | /* If we need to produce a 64-bit address, we are better off using | |
15111 | the default instruction sequence. */ | |
aed1a261 | 15112 | in_shared = mips_in_shared || HAVE_64BIT_SYMBOLS; |
aa6975fb | 15113 | |
252b5132 | 15114 | ex.X_op = O_symbol; |
bbe506e8 TS |
15115 | ex.X_add_symbol = symbol_find_or_make (in_shared ? "_gp_disp" : |
15116 | "__gnu_local_gp"); | |
252b5132 RH |
15117 | ex.X_op_symbol = NULL; |
15118 | ex.X_add_number = 0; | |
15119 | ||
15120 | /* In ELF, this symbol is implicitly an STT_OBJECT symbol. */ | |
49309057 | 15121 | symbol_get_bfdsym (ex.X_add_symbol)->flags |= BSF_OBJECT; |
252b5132 | 15122 | |
8a75745d MR |
15123 | mips_mark_labels (); |
15124 | mips_assembling_insn = TRUE; | |
15125 | ||
584892a6 | 15126 | macro_start (); |
67c0d1eb RS |
15127 | macro_build_lui (&ex, mips_gp_register); |
15128 | macro_build (&ex, "addiu", "t,r,j", mips_gp_register, | |
17a2f251 | 15129 | mips_gp_register, BFD_RELOC_LO16); |
aa6975fb ILT |
15130 | if (in_shared) |
15131 | macro_build (NULL, "addu", "d,v,t", mips_gp_register, | |
15132 | mips_gp_register, reg); | |
584892a6 | 15133 | macro_end (); |
252b5132 | 15134 | |
8a75745d | 15135 | mips_assembling_insn = FALSE; |
252b5132 RH |
15136 | demand_empty_rest_of_line (); |
15137 | } | |
15138 | ||
6478892d TS |
15139 | /* Handle the .cpsetup pseudo-op defined for NewABI PIC code. The syntax is: |
15140 | .cpsetup $reg1, offset|$reg2, label | |
15141 | ||
15142 | If offset is given, this results in: | |
15143 | sd $gp, offset($sp) | |
956cd1d6 | 15144 | lui $gp, %hi(%neg(%gp_rel(label))) |
698b7d9d TS |
15145 | addiu $gp, $gp, %lo(%neg(%gp_rel(label))) |
15146 | daddu $gp, $gp, $reg1 | |
6478892d TS |
15147 | |
15148 | If $reg2 is given, this results in: | |
15149 | daddu $reg2, $gp, $0 | |
956cd1d6 | 15150 | lui $gp, %hi(%neg(%gp_rel(label))) |
698b7d9d TS |
15151 | addiu $gp, $gp, %lo(%neg(%gp_rel(label))) |
15152 | daddu $gp, $gp, $reg1 | |
aa6975fb ILT |
15153 | $reg1 is normally $25 == $t9. |
15154 | ||
15155 | The -mno-shared option replaces the last three instructions with | |
15156 | lui $gp,%hi(_gp) | |
54f4ddb3 | 15157 | addiu $gp,$gp,%lo(_gp) */ |
aa6975fb | 15158 | |
6478892d | 15159 | static void |
17a2f251 | 15160 | s_cpsetup (int ignore ATTRIBUTE_UNUSED) |
6478892d TS |
15161 | { |
15162 | expressionS ex_off; | |
15163 | expressionS ex_sym; | |
15164 | int reg1; | |
6478892d | 15165 | |
8586fc66 | 15166 | /* If we are not generating SVR4 PIC code, .cpsetup is ignored. |
6478892d TS |
15167 | We also need NewABI support. */ |
15168 | if (mips_pic != SVR4_PIC || ! HAVE_NEWABI) | |
15169 | { | |
15170 | s_ignore (0); | |
15171 | return; | |
15172 | } | |
15173 | ||
a276b80c MR |
15174 | if (mips_opts.mips16) |
15175 | { | |
15176 | as_bad (_("%s not supported in MIPS16 mode"), ".cpsetup"); | |
15177 | ignore_rest_of_line (); | |
15178 | return; | |
15179 | } | |
15180 | ||
6478892d TS |
15181 | reg1 = tc_get_register (0); |
15182 | SKIP_WHITESPACE (); | |
15183 | if (*input_line_pointer != ',') | |
15184 | { | |
15185 | as_bad (_("missing argument separator ',' for .cpsetup")); | |
15186 | return; | |
15187 | } | |
15188 | else | |
80245285 | 15189 | ++input_line_pointer; |
6478892d TS |
15190 | SKIP_WHITESPACE (); |
15191 | if (*input_line_pointer == '$') | |
80245285 TS |
15192 | { |
15193 | mips_cpreturn_register = tc_get_register (0); | |
15194 | mips_cpreturn_offset = -1; | |
15195 | } | |
6478892d | 15196 | else |
80245285 TS |
15197 | { |
15198 | mips_cpreturn_offset = get_absolute_expression (); | |
15199 | mips_cpreturn_register = -1; | |
15200 | } | |
6478892d TS |
15201 | SKIP_WHITESPACE (); |
15202 | if (*input_line_pointer != ',') | |
15203 | { | |
15204 | as_bad (_("missing argument separator ',' for .cpsetup")); | |
15205 | return; | |
15206 | } | |
15207 | else | |
f9419b05 | 15208 | ++input_line_pointer; |
6478892d | 15209 | SKIP_WHITESPACE (); |
f21f8242 | 15210 | expression (&ex_sym); |
6478892d | 15211 | |
8a75745d MR |
15212 | mips_mark_labels (); |
15213 | mips_assembling_insn = TRUE; | |
15214 | ||
584892a6 | 15215 | macro_start (); |
6478892d TS |
15216 | if (mips_cpreturn_register == -1) |
15217 | { | |
15218 | ex_off.X_op = O_constant; | |
15219 | ex_off.X_add_symbol = NULL; | |
15220 | ex_off.X_op_symbol = NULL; | |
15221 | ex_off.X_add_number = mips_cpreturn_offset; | |
15222 | ||
67c0d1eb | 15223 | macro_build (&ex_off, "sd", "t,o(b)", mips_gp_register, |
17a2f251 | 15224 | BFD_RELOC_LO16, SP); |
6478892d TS |
15225 | } |
15226 | else | |
67c0d1eb | 15227 | macro_build (NULL, "daddu", "d,v,t", mips_cpreturn_register, |
17a2f251 | 15228 | mips_gp_register, 0); |
6478892d | 15229 | |
aed1a261 | 15230 | if (mips_in_shared || HAVE_64BIT_SYMBOLS) |
aa6975fb | 15231 | { |
df58fc94 | 15232 | macro_build (&ex_sym, "lui", LUI_FMT, mips_gp_register, |
aa6975fb ILT |
15233 | -1, BFD_RELOC_GPREL16, BFD_RELOC_MIPS_SUB, |
15234 | BFD_RELOC_HI16_S); | |
15235 | ||
15236 | macro_build (&ex_sym, "addiu", "t,r,j", mips_gp_register, | |
15237 | mips_gp_register, -1, BFD_RELOC_GPREL16, | |
15238 | BFD_RELOC_MIPS_SUB, BFD_RELOC_LO16); | |
15239 | ||
15240 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", mips_gp_register, | |
15241 | mips_gp_register, reg1); | |
15242 | } | |
15243 | else | |
15244 | { | |
15245 | expressionS ex; | |
15246 | ||
15247 | ex.X_op = O_symbol; | |
4184909a | 15248 | ex.X_add_symbol = symbol_find_or_make ("__gnu_local_gp"); |
aa6975fb ILT |
15249 | ex.X_op_symbol = NULL; |
15250 | ex.X_add_number = 0; | |
6e1304d8 | 15251 | |
aa6975fb ILT |
15252 | /* In ELF, this symbol is implicitly an STT_OBJECT symbol. */ |
15253 | symbol_get_bfdsym (ex.X_add_symbol)->flags |= BSF_OBJECT; | |
15254 | ||
15255 | macro_build_lui (&ex, mips_gp_register); | |
15256 | macro_build (&ex, "addiu", "t,r,j", mips_gp_register, | |
15257 | mips_gp_register, BFD_RELOC_LO16); | |
15258 | } | |
f21f8242 | 15259 | |
584892a6 | 15260 | macro_end (); |
6478892d | 15261 | |
8a75745d | 15262 | mips_assembling_insn = FALSE; |
6478892d TS |
15263 | demand_empty_rest_of_line (); |
15264 | } | |
15265 | ||
15266 | static void | |
17a2f251 | 15267 | s_cplocal (int ignore ATTRIBUTE_UNUSED) |
6478892d TS |
15268 | { |
15269 | /* If we are not generating SVR4 PIC code, or if this is not NewABI code, | |
54f4ddb3 | 15270 | .cplocal is ignored. */ |
6478892d TS |
15271 | if (mips_pic != SVR4_PIC || ! HAVE_NEWABI) |
15272 | { | |
15273 | s_ignore (0); | |
15274 | return; | |
15275 | } | |
15276 | ||
a276b80c MR |
15277 | if (mips_opts.mips16) |
15278 | { | |
15279 | as_bad (_("%s not supported in MIPS16 mode"), ".cplocal"); | |
15280 | ignore_rest_of_line (); | |
15281 | return; | |
15282 | } | |
15283 | ||
6478892d | 15284 | mips_gp_register = tc_get_register (0); |
85b51719 | 15285 | demand_empty_rest_of_line (); |
6478892d TS |
15286 | } |
15287 | ||
252b5132 RH |
15288 | /* Handle the .cprestore pseudo-op. This stores $gp into a given |
15289 | offset from $sp. The offset is remembered, and after making a PIC | |
15290 | call $gp is restored from that location. */ | |
15291 | ||
15292 | static void | |
17a2f251 | 15293 | s_cprestore (int ignore ATTRIBUTE_UNUSED) |
252b5132 RH |
15294 | { |
15295 | expressionS ex; | |
252b5132 | 15296 | |
6478892d | 15297 | /* If we are not generating SVR4 PIC code, or if this is NewABI code, |
c9914766 | 15298 | .cprestore is ignored. */ |
6478892d | 15299 | if (mips_pic != SVR4_PIC || HAVE_NEWABI) |
252b5132 RH |
15300 | { |
15301 | s_ignore (0); | |
15302 | return; | |
15303 | } | |
15304 | ||
a276b80c MR |
15305 | if (mips_opts.mips16) |
15306 | { | |
15307 | as_bad (_("%s not supported in MIPS16 mode"), ".cprestore"); | |
15308 | ignore_rest_of_line (); | |
15309 | return; | |
15310 | } | |
15311 | ||
252b5132 | 15312 | mips_cprestore_offset = get_absolute_expression (); |
7a621144 | 15313 | mips_cprestore_valid = 1; |
252b5132 RH |
15314 | |
15315 | ex.X_op = O_constant; | |
15316 | ex.X_add_symbol = NULL; | |
15317 | ex.X_op_symbol = NULL; | |
15318 | ex.X_add_number = mips_cprestore_offset; | |
15319 | ||
8a75745d MR |
15320 | mips_mark_labels (); |
15321 | mips_assembling_insn = TRUE; | |
15322 | ||
584892a6 | 15323 | macro_start (); |
67c0d1eb RS |
15324 | macro_build_ldst_constoffset (&ex, ADDRESS_STORE_INSN, mips_gp_register, |
15325 | SP, HAVE_64BIT_ADDRESSES); | |
584892a6 | 15326 | macro_end (); |
252b5132 | 15327 | |
8a75745d | 15328 | mips_assembling_insn = FALSE; |
252b5132 RH |
15329 | demand_empty_rest_of_line (); |
15330 | } | |
15331 | ||
6478892d | 15332 | /* Handle the .cpreturn pseudo-op defined for NewABI PIC code. If an offset |
67c1ffbe | 15333 | was given in the preceding .cpsetup, it results in: |
6478892d | 15334 | ld $gp, offset($sp) |
76b3015f | 15335 | |
6478892d | 15336 | If a register $reg2 was given there, it results in: |
54f4ddb3 TS |
15337 | daddu $gp, $reg2, $0 */ |
15338 | ||
6478892d | 15339 | static void |
17a2f251 | 15340 | s_cpreturn (int ignore ATTRIBUTE_UNUSED) |
6478892d TS |
15341 | { |
15342 | expressionS ex; | |
6478892d TS |
15343 | |
15344 | /* If we are not generating SVR4 PIC code, .cpreturn is ignored. | |
15345 | We also need NewABI support. */ | |
15346 | if (mips_pic != SVR4_PIC || ! HAVE_NEWABI) | |
15347 | { | |
15348 | s_ignore (0); | |
15349 | return; | |
15350 | } | |
15351 | ||
a276b80c MR |
15352 | if (mips_opts.mips16) |
15353 | { | |
15354 | as_bad (_("%s not supported in MIPS16 mode"), ".cpreturn"); | |
15355 | ignore_rest_of_line (); | |
15356 | return; | |
15357 | } | |
15358 | ||
8a75745d MR |
15359 | mips_mark_labels (); |
15360 | mips_assembling_insn = TRUE; | |
15361 | ||
584892a6 | 15362 | macro_start (); |
6478892d TS |
15363 | if (mips_cpreturn_register == -1) |
15364 | { | |
15365 | ex.X_op = O_constant; | |
15366 | ex.X_add_symbol = NULL; | |
15367 | ex.X_op_symbol = NULL; | |
15368 | ex.X_add_number = mips_cpreturn_offset; | |
15369 | ||
67c0d1eb | 15370 | macro_build (&ex, "ld", "t,o(b)", mips_gp_register, BFD_RELOC_LO16, SP); |
6478892d TS |
15371 | } |
15372 | else | |
67c0d1eb | 15373 | macro_build (NULL, "daddu", "d,v,t", mips_gp_register, |
17a2f251 | 15374 | mips_cpreturn_register, 0); |
584892a6 | 15375 | macro_end (); |
6478892d | 15376 | |
8a75745d | 15377 | mips_assembling_insn = FALSE; |
6478892d TS |
15378 | demand_empty_rest_of_line (); |
15379 | } | |
15380 | ||
d0f13682 CLT |
15381 | /* Handle a .dtprelword, .dtpreldword, .tprelword, or .tpreldword |
15382 | pseudo-op; DIRSTR says which. The pseudo-op generates a BYTES-size | |
15383 | DTP- or TP-relative relocation of type RTYPE, for use in either DWARF | |
15384 | debug information or MIPS16 TLS. */ | |
741d6ea8 JM |
15385 | |
15386 | static void | |
d0f13682 CLT |
15387 | s_tls_rel_directive (const size_t bytes, const char *dirstr, |
15388 | bfd_reloc_code_real_type rtype) | |
741d6ea8 JM |
15389 | { |
15390 | expressionS ex; | |
15391 | char *p; | |
15392 | ||
15393 | expression (&ex); | |
15394 | ||
15395 | if (ex.X_op != O_symbol) | |
15396 | { | |
1661c76c | 15397 | as_bad (_("unsupported use of %s"), dirstr); |
741d6ea8 JM |
15398 | ignore_rest_of_line (); |
15399 | } | |
15400 | ||
15401 | p = frag_more (bytes); | |
15402 | md_number_to_chars (p, 0, bytes); | |
d0f13682 | 15403 | fix_new_exp (frag_now, p - frag_now->fr_literal, bytes, &ex, FALSE, rtype); |
741d6ea8 | 15404 | demand_empty_rest_of_line (); |
de64cffd | 15405 | mips_clear_insn_labels (); |
741d6ea8 JM |
15406 | } |
15407 | ||
15408 | /* Handle .dtprelword. */ | |
15409 | ||
15410 | static void | |
15411 | s_dtprelword (int ignore ATTRIBUTE_UNUSED) | |
15412 | { | |
d0f13682 | 15413 | s_tls_rel_directive (4, ".dtprelword", BFD_RELOC_MIPS_TLS_DTPREL32); |
741d6ea8 JM |
15414 | } |
15415 | ||
15416 | /* Handle .dtpreldword. */ | |
15417 | ||
15418 | static void | |
15419 | s_dtpreldword (int ignore ATTRIBUTE_UNUSED) | |
15420 | { | |
d0f13682 CLT |
15421 | s_tls_rel_directive (8, ".dtpreldword", BFD_RELOC_MIPS_TLS_DTPREL64); |
15422 | } | |
15423 | ||
15424 | /* Handle .tprelword. */ | |
15425 | ||
15426 | static void | |
15427 | s_tprelword (int ignore ATTRIBUTE_UNUSED) | |
15428 | { | |
15429 | s_tls_rel_directive (4, ".tprelword", BFD_RELOC_MIPS_TLS_TPREL32); | |
15430 | } | |
15431 | ||
15432 | /* Handle .tpreldword. */ | |
15433 | ||
15434 | static void | |
15435 | s_tpreldword (int ignore ATTRIBUTE_UNUSED) | |
15436 | { | |
15437 | s_tls_rel_directive (8, ".tpreldword", BFD_RELOC_MIPS_TLS_TPREL64); | |
741d6ea8 JM |
15438 | } |
15439 | ||
6478892d TS |
15440 | /* Handle the .gpvalue pseudo-op. This is used when generating NewABI PIC |
15441 | code. It sets the offset to use in gp_rel relocations. */ | |
15442 | ||
15443 | static void | |
17a2f251 | 15444 | s_gpvalue (int ignore ATTRIBUTE_UNUSED) |
6478892d TS |
15445 | { |
15446 | /* If we are not generating SVR4 PIC code, .gpvalue is ignored. | |
15447 | We also need NewABI support. */ | |
15448 | if (mips_pic != SVR4_PIC || ! HAVE_NEWABI) | |
15449 | { | |
15450 | s_ignore (0); | |
15451 | return; | |
15452 | } | |
15453 | ||
def2e0dd | 15454 | mips_gprel_offset = get_absolute_expression (); |
6478892d TS |
15455 | |
15456 | demand_empty_rest_of_line (); | |
15457 | } | |
15458 | ||
252b5132 RH |
15459 | /* Handle the .gpword pseudo-op. This is used when generating PIC |
15460 | code. It generates a 32 bit GP relative reloc. */ | |
15461 | ||
15462 | static void | |
17a2f251 | 15463 | s_gpword (int ignore ATTRIBUTE_UNUSED) |
252b5132 | 15464 | { |
a8dbcb85 TS |
15465 | segment_info_type *si; |
15466 | struct insn_label_list *l; | |
252b5132 RH |
15467 | expressionS ex; |
15468 | char *p; | |
15469 | ||
15470 | /* When not generating PIC code, this is treated as .word. */ | |
15471 | if (mips_pic != SVR4_PIC) | |
15472 | { | |
15473 | s_cons (2); | |
15474 | return; | |
15475 | } | |
15476 | ||
a8dbcb85 TS |
15477 | si = seg_info (now_seg); |
15478 | l = si->label_list; | |
7d10b47d | 15479 | mips_emit_delays (); |
252b5132 | 15480 | if (auto_align) |
462427c4 | 15481 | mips_align (2, 0, l); |
252b5132 RH |
15482 | |
15483 | expression (&ex); | |
a1facbec | 15484 | mips_clear_insn_labels (); |
252b5132 RH |
15485 | |
15486 | if (ex.X_op != O_symbol || ex.X_add_number != 0) | |
15487 | { | |
1661c76c | 15488 | as_bad (_("unsupported use of .gpword")); |
252b5132 RH |
15489 | ignore_rest_of_line (); |
15490 | } | |
15491 | ||
15492 | p = frag_more (4); | |
17a2f251 | 15493 | md_number_to_chars (p, 0, 4); |
b34976b6 | 15494 | fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE, |
cdf6fd85 | 15495 | BFD_RELOC_GPREL32); |
252b5132 RH |
15496 | |
15497 | demand_empty_rest_of_line (); | |
15498 | } | |
15499 | ||
10181a0d | 15500 | static void |
17a2f251 | 15501 | s_gpdword (int ignore ATTRIBUTE_UNUSED) |
10181a0d | 15502 | { |
a8dbcb85 TS |
15503 | segment_info_type *si; |
15504 | struct insn_label_list *l; | |
10181a0d AO |
15505 | expressionS ex; |
15506 | char *p; | |
15507 | ||
15508 | /* When not generating PIC code, this is treated as .dword. */ | |
15509 | if (mips_pic != SVR4_PIC) | |
15510 | { | |
15511 | s_cons (3); | |
15512 | return; | |
15513 | } | |
15514 | ||
a8dbcb85 TS |
15515 | si = seg_info (now_seg); |
15516 | l = si->label_list; | |
7d10b47d | 15517 | mips_emit_delays (); |
10181a0d | 15518 | if (auto_align) |
462427c4 | 15519 | mips_align (3, 0, l); |
10181a0d AO |
15520 | |
15521 | expression (&ex); | |
a1facbec | 15522 | mips_clear_insn_labels (); |
10181a0d AO |
15523 | |
15524 | if (ex.X_op != O_symbol || ex.X_add_number != 0) | |
15525 | { | |
1661c76c | 15526 | as_bad (_("unsupported use of .gpdword")); |
10181a0d AO |
15527 | ignore_rest_of_line (); |
15528 | } | |
15529 | ||
15530 | p = frag_more (8); | |
17a2f251 | 15531 | md_number_to_chars (p, 0, 8); |
a105a300 | 15532 | fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE, |
6e1304d8 | 15533 | BFD_RELOC_GPREL32)->fx_tcbit = 1; |
10181a0d AO |
15534 | |
15535 | /* GPREL32 composed with 64 gives a 64-bit GP offset. */ | |
6e1304d8 RS |
15536 | fix_new (frag_now, p - frag_now->fr_literal, 8, NULL, 0, |
15537 | FALSE, BFD_RELOC_64)->fx_tcbit = 1; | |
10181a0d AO |
15538 | |
15539 | demand_empty_rest_of_line (); | |
15540 | } | |
15541 | ||
a3f278e2 CM |
15542 | /* Handle the .ehword pseudo-op. This is used when generating unwinding |
15543 | tables. It generates a R_MIPS_EH reloc. */ | |
15544 | ||
15545 | static void | |
15546 | s_ehword (int ignore ATTRIBUTE_UNUSED) | |
15547 | { | |
15548 | expressionS ex; | |
15549 | char *p; | |
15550 | ||
15551 | mips_emit_delays (); | |
15552 | ||
15553 | expression (&ex); | |
15554 | mips_clear_insn_labels (); | |
15555 | ||
15556 | if (ex.X_op != O_symbol || ex.X_add_number != 0) | |
15557 | { | |
1661c76c | 15558 | as_bad (_("unsupported use of .ehword")); |
a3f278e2 CM |
15559 | ignore_rest_of_line (); |
15560 | } | |
15561 | ||
15562 | p = frag_more (4); | |
15563 | md_number_to_chars (p, 0, 4); | |
15564 | fix_new_exp (frag_now, p - frag_now->fr_literal, 4, &ex, FALSE, | |
15565 | BFD_RELOC_MIPS_EH); | |
15566 | ||
15567 | demand_empty_rest_of_line (); | |
15568 | } | |
15569 | ||
252b5132 RH |
15570 | /* Handle the .cpadd pseudo-op. This is used when dealing with switch |
15571 | tables in SVR4 PIC code. */ | |
15572 | ||
15573 | static void | |
17a2f251 | 15574 | s_cpadd (int ignore ATTRIBUTE_UNUSED) |
252b5132 | 15575 | { |
252b5132 RH |
15576 | int reg; |
15577 | ||
10181a0d AO |
15578 | /* This is ignored when not generating SVR4 PIC code. */ |
15579 | if (mips_pic != SVR4_PIC) | |
252b5132 RH |
15580 | { |
15581 | s_ignore (0); | |
15582 | return; | |
15583 | } | |
15584 | ||
8a75745d MR |
15585 | mips_mark_labels (); |
15586 | mips_assembling_insn = TRUE; | |
15587 | ||
252b5132 | 15588 | /* Add $gp to the register named as an argument. */ |
584892a6 | 15589 | macro_start (); |
252b5132 | 15590 | reg = tc_get_register (0); |
67c0d1eb | 15591 | macro_build (NULL, ADDRESS_ADD_INSN, "d,v,t", reg, reg, mips_gp_register); |
584892a6 | 15592 | macro_end (); |
252b5132 | 15593 | |
8a75745d | 15594 | mips_assembling_insn = FALSE; |
bdaaa2e1 | 15595 | demand_empty_rest_of_line (); |
252b5132 RH |
15596 | } |
15597 | ||
15598 | /* Handle the .insn pseudo-op. This marks instruction labels in | |
df58fc94 | 15599 | mips16/micromips mode. This permits the linker to handle them specially, |
252b5132 RH |
15600 | such as generating jalx instructions when needed. We also make |
15601 | them odd for the duration of the assembly, in order to generate the | |
15602 | right sort of code. We will make them even in the adjust_symtab | |
15603 | routine, while leaving them marked. This is convenient for the | |
15604 | debugger and the disassembler. The linker knows to make them odd | |
15605 | again. */ | |
15606 | ||
15607 | static void | |
17a2f251 | 15608 | s_insn (int ignore ATTRIBUTE_UNUSED) |
252b5132 | 15609 | { |
df58fc94 | 15610 | mips_mark_labels (); |
252b5132 RH |
15611 | |
15612 | demand_empty_rest_of_line (); | |
15613 | } | |
15614 | ||
ba92f887 MR |
15615 | /* Handle the .nan pseudo-op. */ |
15616 | ||
15617 | static void | |
15618 | s_nan (int ignore ATTRIBUTE_UNUSED) | |
15619 | { | |
15620 | static const char str_legacy[] = "legacy"; | |
15621 | static const char str_2008[] = "2008"; | |
15622 | size_t i; | |
15623 | ||
15624 | for (i = 0; !is_end_of_line[(unsigned char) input_line_pointer[i]]; i++); | |
15625 | ||
15626 | if (i == sizeof (str_2008) - 1 | |
15627 | && memcmp (input_line_pointer, str_2008, i) == 0) | |
15628 | mips_flag_nan2008 = TRUE; | |
15629 | else if (i == sizeof (str_legacy) - 1 | |
15630 | && memcmp (input_line_pointer, str_legacy, i) == 0) | |
15631 | mips_flag_nan2008 = FALSE; | |
15632 | else | |
1661c76c | 15633 | as_bad (_("bad .nan directive")); |
ba92f887 MR |
15634 | |
15635 | input_line_pointer += i; | |
15636 | demand_empty_rest_of_line (); | |
15637 | } | |
15638 | ||
754e2bb9 RS |
15639 | /* Handle a .stab[snd] directive. Ideally these directives would be |
15640 | implemented in a transparent way, so that removing them would not | |
15641 | have any effect on the generated instructions. However, s_stab | |
15642 | internally changes the section, so in practice we need to decide | |
15643 | now whether the preceding label marks compressed code. We do not | |
15644 | support changing the compression mode of a label after a .stab* | |
15645 | directive, such as in: | |
15646 | ||
15647 | foo: | |
15648 | .stabs ... | |
15649 | .set mips16 | |
15650 | ||
15651 | so the current mode wins. */ | |
252b5132 RH |
15652 | |
15653 | static void | |
17a2f251 | 15654 | s_mips_stab (int type) |
252b5132 | 15655 | { |
754e2bb9 | 15656 | mips_mark_labels (); |
252b5132 RH |
15657 | s_stab (type); |
15658 | } | |
15659 | ||
54f4ddb3 | 15660 | /* Handle the .weakext pseudo-op as defined in Kane and Heinrich. */ |
252b5132 RH |
15661 | |
15662 | static void | |
17a2f251 | 15663 | s_mips_weakext (int ignore ATTRIBUTE_UNUSED) |
252b5132 RH |
15664 | { |
15665 | char *name; | |
15666 | int c; | |
15667 | symbolS *symbolP; | |
15668 | expressionS exp; | |
15669 | ||
15670 | name = input_line_pointer; | |
15671 | c = get_symbol_end (); | |
15672 | symbolP = symbol_find_or_make (name); | |
15673 | S_SET_WEAK (symbolP); | |
15674 | *input_line_pointer = c; | |
15675 | ||
15676 | SKIP_WHITESPACE (); | |
15677 | ||
15678 | if (! is_end_of_line[(unsigned char) *input_line_pointer]) | |
15679 | { | |
15680 | if (S_IS_DEFINED (symbolP)) | |
15681 | { | |
20203fb9 | 15682 | as_bad (_("ignoring attempt to redefine symbol %s"), |
252b5132 RH |
15683 | S_GET_NAME (symbolP)); |
15684 | ignore_rest_of_line (); | |
15685 | return; | |
15686 | } | |
bdaaa2e1 | 15687 | |
252b5132 RH |
15688 | if (*input_line_pointer == ',') |
15689 | { | |
15690 | ++input_line_pointer; | |
15691 | SKIP_WHITESPACE (); | |
15692 | } | |
bdaaa2e1 | 15693 | |
252b5132 RH |
15694 | expression (&exp); |
15695 | if (exp.X_op != O_symbol) | |
15696 | { | |
20203fb9 | 15697 | as_bad (_("bad .weakext directive")); |
98d3f06f | 15698 | ignore_rest_of_line (); |
252b5132 RH |
15699 | return; |
15700 | } | |
49309057 | 15701 | symbol_set_value_expression (symbolP, &exp); |
252b5132 RH |
15702 | } |
15703 | ||
15704 | demand_empty_rest_of_line (); | |
15705 | } | |
15706 | ||
15707 | /* Parse a register string into a number. Called from the ECOFF code | |
15708 | to parse .frame. The argument is non-zero if this is the frame | |
15709 | register, so that we can record it in mips_frame_reg. */ | |
15710 | ||
15711 | int | |
17a2f251 | 15712 | tc_get_register (int frame) |
252b5132 | 15713 | { |
707bfff6 | 15714 | unsigned int reg; |
252b5132 RH |
15715 | |
15716 | SKIP_WHITESPACE (); | |
707bfff6 TS |
15717 | if (! reg_lookup (&input_line_pointer, RWARN | RTYPE_NUM | RTYPE_GP, ®)) |
15718 | reg = 0; | |
252b5132 | 15719 | if (frame) |
7a621144 DJ |
15720 | { |
15721 | mips_frame_reg = reg != 0 ? reg : SP; | |
15722 | mips_frame_reg_valid = 1; | |
15723 | mips_cprestore_valid = 0; | |
15724 | } | |
252b5132 RH |
15725 | return reg; |
15726 | } | |
15727 | ||
15728 | valueT | |
17a2f251 | 15729 | md_section_align (asection *seg, valueT addr) |
252b5132 RH |
15730 | { |
15731 | int align = bfd_get_section_alignment (stdoutput, seg); | |
15732 | ||
f3ded42a RS |
15733 | /* We don't need to align ELF sections to the full alignment. |
15734 | However, Irix 5 may prefer that we align them at least to a 16 | |
15735 | byte boundary. We don't bother to align the sections if we | |
15736 | are targeted for an embedded system. */ | |
15737 | if (strncmp (TARGET_OS, "elf", 3) == 0) | |
15738 | return addr; | |
15739 | if (align > 4) | |
15740 | align = 4; | |
252b5132 RH |
15741 | |
15742 | return ((addr + (1 << align) - 1) & (-1 << align)); | |
15743 | } | |
15744 | ||
15745 | /* Utility routine, called from above as well. If called while the | |
15746 | input file is still being read, it's only an approximation. (For | |
15747 | example, a symbol may later become defined which appeared to be | |
15748 | undefined earlier.) */ | |
15749 | ||
15750 | static int | |
17a2f251 | 15751 | nopic_need_relax (symbolS *sym, int before_relaxing) |
252b5132 RH |
15752 | { |
15753 | if (sym == 0) | |
15754 | return 0; | |
15755 | ||
4d0d148d | 15756 | if (g_switch_value > 0) |
252b5132 RH |
15757 | { |
15758 | const char *symname; | |
15759 | int change; | |
15760 | ||
c9914766 | 15761 | /* Find out whether this symbol can be referenced off the $gp |
252b5132 RH |
15762 | register. It can be if it is smaller than the -G size or if |
15763 | it is in the .sdata or .sbss section. Certain symbols can | |
c9914766 | 15764 | not be referenced off the $gp, although it appears as though |
252b5132 RH |
15765 | they can. */ |
15766 | symname = S_GET_NAME (sym); | |
15767 | if (symname != (const char *) NULL | |
15768 | && (strcmp (symname, "eprol") == 0 | |
15769 | || strcmp (symname, "etext") == 0 | |
15770 | || strcmp (symname, "_gp") == 0 | |
15771 | || strcmp (symname, "edata") == 0 | |
15772 | || strcmp (symname, "_fbss") == 0 | |
15773 | || strcmp (symname, "_fdata") == 0 | |
15774 | || strcmp (symname, "_ftext") == 0 | |
15775 | || strcmp (symname, "end") == 0 | |
15776 | || strcmp (symname, "_gp_disp") == 0)) | |
15777 | change = 1; | |
15778 | else if ((! S_IS_DEFINED (sym) || S_IS_COMMON (sym)) | |
15779 | && (0 | |
15780 | #ifndef NO_ECOFF_DEBUGGING | |
49309057 ILT |
15781 | || (symbol_get_obj (sym)->ecoff_extern_size != 0 |
15782 | && (symbol_get_obj (sym)->ecoff_extern_size | |
15783 | <= g_switch_value)) | |
252b5132 RH |
15784 | #endif |
15785 | /* We must defer this decision until after the whole | |
15786 | file has been read, since there might be a .extern | |
15787 | after the first use of this symbol. */ | |
15788 | || (before_relaxing | |
15789 | #ifndef NO_ECOFF_DEBUGGING | |
49309057 | 15790 | && symbol_get_obj (sym)->ecoff_extern_size == 0 |
252b5132 RH |
15791 | #endif |
15792 | && S_GET_VALUE (sym) == 0) | |
15793 | || (S_GET_VALUE (sym) != 0 | |
15794 | && S_GET_VALUE (sym) <= g_switch_value))) | |
15795 | change = 0; | |
15796 | else | |
15797 | { | |
15798 | const char *segname; | |
15799 | ||
15800 | segname = segment_name (S_GET_SEGMENT (sym)); | |
9c2799c2 | 15801 | gas_assert (strcmp (segname, ".lit8") != 0 |
252b5132 RH |
15802 | && strcmp (segname, ".lit4") != 0); |
15803 | change = (strcmp (segname, ".sdata") != 0 | |
fba2b7f9 GK |
15804 | && strcmp (segname, ".sbss") != 0 |
15805 | && strncmp (segname, ".sdata.", 7) != 0 | |
d4dc2f22 TS |
15806 | && strncmp (segname, ".sbss.", 6) != 0 |
15807 | && strncmp (segname, ".gnu.linkonce.sb.", 17) != 0 | |
fba2b7f9 | 15808 | && strncmp (segname, ".gnu.linkonce.s.", 16) != 0); |
252b5132 RH |
15809 | } |
15810 | return change; | |
15811 | } | |
15812 | else | |
c9914766 | 15813 | /* We are not optimizing for the $gp register. */ |
252b5132 RH |
15814 | return 1; |
15815 | } | |
15816 | ||
5919d012 RS |
15817 | |
15818 | /* Return true if the given symbol should be considered local for SVR4 PIC. */ | |
15819 | ||
15820 | static bfd_boolean | |
17a2f251 | 15821 | pic_need_relax (symbolS *sym, asection *segtype) |
5919d012 RS |
15822 | { |
15823 | asection *symsec; | |
5919d012 RS |
15824 | |
15825 | /* Handle the case of a symbol equated to another symbol. */ | |
15826 | while (symbol_equated_reloc_p (sym)) | |
15827 | { | |
15828 | symbolS *n; | |
15829 | ||
5f0fe04b | 15830 | /* It's possible to get a loop here in a badly written program. */ |
5919d012 RS |
15831 | n = symbol_get_value_expression (sym)->X_add_symbol; |
15832 | if (n == sym) | |
15833 | break; | |
15834 | sym = n; | |
15835 | } | |
15836 | ||
df1f3cda DD |
15837 | if (symbol_section_p (sym)) |
15838 | return TRUE; | |
15839 | ||
5919d012 RS |
15840 | symsec = S_GET_SEGMENT (sym); |
15841 | ||
5919d012 | 15842 | /* This must duplicate the test in adjust_reloc_syms. */ |
45dfa85a AM |
15843 | return (!bfd_is_und_section (symsec) |
15844 | && !bfd_is_abs_section (symsec) | |
5f0fe04b TS |
15845 | && !bfd_is_com_section (symsec) |
15846 | && !s_is_linkonce (sym, segtype) | |
5919d012 | 15847 | /* A global or weak symbol is treated as external. */ |
f3ded42a | 15848 | && (!S_IS_WEAK (sym) && !S_IS_EXTERNAL (sym))); |
5919d012 RS |
15849 | } |
15850 | ||
15851 | ||
252b5132 RH |
15852 | /* Given a mips16 variant frag FRAGP, return non-zero if it needs an |
15853 | extended opcode. SEC is the section the frag is in. */ | |
15854 | ||
15855 | static int | |
17a2f251 | 15856 | mips16_extended_frag (fragS *fragp, asection *sec, long stretch) |
252b5132 RH |
15857 | { |
15858 | int type; | |
3ccad066 | 15859 | const struct mips_int_operand *operand; |
252b5132 | 15860 | offsetT val; |
252b5132 | 15861 | segT symsec; |
98aa84af | 15862 | fragS *sym_frag; |
252b5132 RH |
15863 | |
15864 | if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype)) | |
15865 | return 0; | |
15866 | if (RELAX_MIPS16_USER_EXT (fragp->fr_subtype)) | |
15867 | return 1; | |
15868 | ||
15869 | type = RELAX_MIPS16_TYPE (fragp->fr_subtype); | |
3ccad066 | 15870 | operand = mips16_immed_operand (type, FALSE); |
252b5132 | 15871 | |
98aa84af | 15872 | sym_frag = symbol_get_frag (fragp->fr_symbol); |
ac62c346 | 15873 | val = S_GET_VALUE (fragp->fr_symbol); |
98aa84af | 15874 | symsec = S_GET_SEGMENT (fragp->fr_symbol); |
252b5132 | 15875 | |
3ccad066 | 15876 | if (operand->root.type == OP_PCREL) |
252b5132 | 15877 | { |
3ccad066 | 15878 | const struct mips_pcrel_operand *pcrel_op; |
252b5132 | 15879 | addressT addr; |
3ccad066 | 15880 | offsetT maxtiny; |
252b5132 RH |
15881 | |
15882 | /* We won't have the section when we are called from | |
15883 | mips_relax_frag. However, we will always have been called | |
15884 | from md_estimate_size_before_relax first. If this is a | |
15885 | branch to a different section, we mark it as such. If SEC is | |
15886 | NULL, and the frag is not marked, then it must be a branch to | |
15887 | the same section. */ | |
3ccad066 | 15888 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
252b5132 RH |
15889 | if (sec == NULL) |
15890 | { | |
15891 | if (RELAX_MIPS16_LONG_BRANCH (fragp->fr_subtype)) | |
15892 | return 1; | |
15893 | } | |
15894 | else | |
15895 | { | |
98aa84af | 15896 | /* Must have been called from md_estimate_size_before_relax. */ |
252b5132 RH |
15897 | if (symsec != sec) |
15898 | { | |
15899 | fragp->fr_subtype = | |
15900 | RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype); | |
15901 | ||
15902 | /* FIXME: We should support this, and let the linker | |
15903 | catch branches and loads that are out of range. */ | |
15904 | as_bad_where (fragp->fr_file, fragp->fr_line, | |
15905 | _("unsupported PC relative reference to different section")); | |
15906 | ||
15907 | return 1; | |
15908 | } | |
98aa84af AM |
15909 | if (fragp != sym_frag && sym_frag->fr_address == 0) |
15910 | /* Assume non-extended on the first relaxation pass. | |
15911 | The address we have calculated will be bogus if this is | |
15912 | a forward branch to another frag, as the forward frag | |
15913 | will have fr_address == 0. */ | |
15914 | return 0; | |
252b5132 RH |
15915 | } |
15916 | ||
15917 | /* In this case, we know for sure that the symbol fragment is in | |
98aa84af AM |
15918 | the same section. If the relax_marker of the symbol fragment |
15919 | differs from the relax_marker of this fragment, we have not | |
15920 | yet adjusted the symbol fragment fr_address. We want to add | |
252b5132 RH |
15921 | in STRETCH in order to get a better estimate of the address. |
15922 | This particularly matters because of the shift bits. */ | |
15923 | if (stretch != 0 | |
98aa84af | 15924 | && sym_frag->relax_marker != fragp->relax_marker) |
252b5132 RH |
15925 | { |
15926 | fragS *f; | |
15927 | ||
15928 | /* Adjust stretch for any alignment frag. Note that if have | |
15929 | been expanding the earlier code, the symbol may be | |
15930 | defined in what appears to be an earlier frag. FIXME: | |
15931 | This doesn't handle the fr_subtype field, which specifies | |
15932 | a maximum number of bytes to skip when doing an | |
15933 | alignment. */ | |
98aa84af | 15934 | for (f = fragp; f != NULL && f != sym_frag; f = f->fr_next) |
252b5132 RH |
15935 | { |
15936 | if (f->fr_type == rs_align || f->fr_type == rs_align_code) | |
15937 | { | |
15938 | if (stretch < 0) | |
15939 | stretch = - ((- stretch) | |
15940 | & ~ ((1 << (int) f->fr_offset) - 1)); | |
15941 | else | |
15942 | stretch &= ~ ((1 << (int) f->fr_offset) - 1); | |
15943 | if (stretch == 0) | |
15944 | break; | |
15945 | } | |
15946 | } | |
15947 | if (f != NULL) | |
15948 | val += stretch; | |
15949 | } | |
15950 | ||
15951 | addr = fragp->fr_address + fragp->fr_fix; | |
15952 | ||
15953 | /* The base address rules are complicated. The base address of | |
15954 | a branch is the following instruction. The base address of a | |
15955 | PC relative load or add is the instruction itself, but if it | |
15956 | is in a delay slot (in which case it can not be extended) use | |
15957 | the address of the instruction whose delay slot it is in. */ | |
3ccad066 | 15958 | if (pcrel_op->include_isa_bit) |
252b5132 RH |
15959 | { |
15960 | addr += 2; | |
15961 | ||
15962 | /* If we are currently assuming that this frag should be | |
15963 | extended, then, the current address is two bytes | |
bdaaa2e1 | 15964 | higher. */ |
252b5132 RH |
15965 | if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype)) |
15966 | addr += 2; | |
15967 | ||
15968 | /* Ignore the low bit in the target, since it will be set | |
15969 | for a text label. */ | |
3ccad066 | 15970 | val &= -2; |
252b5132 RH |
15971 | } |
15972 | else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)) | |
15973 | addr -= 4; | |
15974 | else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype)) | |
15975 | addr -= 2; | |
15976 | ||
3ccad066 | 15977 | val -= addr & -(1 << pcrel_op->align_log2); |
252b5132 RH |
15978 | |
15979 | /* If any of the shifted bits are set, we must use an extended | |
15980 | opcode. If the address depends on the size of this | |
15981 | instruction, this can lead to a loop, so we arrange to always | |
15982 | use an extended opcode. We only check this when we are in | |
15983 | the main relaxation loop, when SEC is NULL. */ | |
3ccad066 | 15984 | if ((val & ((1 << operand->shift) - 1)) != 0 && sec == NULL) |
252b5132 RH |
15985 | { |
15986 | fragp->fr_subtype = | |
15987 | RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype); | |
15988 | return 1; | |
15989 | } | |
15990 | ||
15991 | /* If we are about to mark a frag as extended because the value | |
3ccad066 RS |
15992 | is precisely the next value above maxtiny, then there is a |
15993 | chance of an infinite loop as in the following code: | |
252b5132 RH |
15994 | la $4,foo |
15995 | .skip 1020 | |
15996 | .align 2 | |
15997 | foo: | |
15998 | In this case when the la is extended, foo is 0x3fc bytes | |
15999 | away, so the la can be shrunk, but then foo is 0x400 away, so | |
16000 | the la must be extended. To avoid this loop, we mark the | |
16001 | frag as extended if it was small, and is about to become | |
3ccad066 RS |
16002 | extended with the next value above maxtiny. */ |
16003 | maxtiny = mips_int_operand_max (operand); | |
16004 | if (val == maxtiny + (1 << operand->shift) | |
252b5132 RH |
16005 | && ! RELAX_MIPS16_EXTENDED (fragp->fr_subtype) |
16006 | && sec == NULL) | |
16007 | { | |
16008 | fragp->fr_subtype = | |
16009 | RELAX_MIPS16_MARK_LONG_BRANCH (fragp->fr_subtype); | |
16010 | return 1; | |
16011 | } | |
16012 | } | |
16013 | else if (symsec != absolute_section && sec != NULL) | |
16014 | as_bad_where (fragp->fr_file, fragp->fr_line, _("unsupported relocation")); | |
16015 | ||
3ccad066 | 16016 | return !mips16_immed_in_range_p (operand, BFD_RELOC_UNUSED, val); |
252b5132 RH |
16017 | } |
16018 | ||
4a6a3df4 AO |
16019 | /* Compute the length of a branch sequence, and adjust the |
16020 | RELAX_BRANCH_TOOFAR bit accordingly. If FRAGP is NULL, the | |
16021 | worst-case length is computed, with UPDATE being used to indicate | |
16022 | whether an unconditional (-1), branch-likely (+1) or regular (0) | |
16023 | branch is to be computed. */ | |
16024 | static int | |
17a2f251 | 16025 | relaxed_branch_length (fragS *fragp, asection *sec, int update) |
4a6a3df4 | 16026 | { |
b34976b6 | 16027 | bfd_boolean toofar; |
4a6a3df4 AO |
16028 | int length; |
16029 | ||
16030 | if (fragp | |
16031 | && S_IS_DEFINED (fragp->fr_symbol) | |
16032 | && sec == S_GET_SEGMENT (fragp->fr_symbol)) | |
16033 | { | |
16034 | addressT addr; | |
16035 | offsetT val; | |
16036 | ||
16037 | val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset; | |
16038 | ||
16039 | addr = fragp->fr_address + fragp->fr_fix + 4; | |
16040 | ||
16041 | val -= addr; | |
16042 | ||
16043 | toofar = val < - (0x8000 << 2) || val >= (0x8000 << 2); | |
16044 | } | |
16045 | else if (fragp) | |
16046 | /* If the symbol is not defined or it's in a different segment, | |
16047 | assume the user knows what's going on and emit a short | |
16048 | branch. */ | |
b34976b6 | 16049 | toofar = FALSE; |
4a6a3df4 | 16050 | else |
b34976b6 | 16051 | toofar = TRUE; |
4a6a3df4 AO |
16052 | |
16053 | if (fragp && update && toofar != RELAX_BRANCH_TOOFAR (fragp->fr_subtype)) | |
16054 | fragp->fr_subtype | |
66b3e8da MR |
16055 | = RELAX_BRANCH_ENCODE (RELAX_BRANCH_AT (fragp->fr_subtype), |
16056 | RELAX_BRANCH_UNCOND (fragp->fr_subtype), | |
4a6a3df4 AO |
16057 | RELAX_BRANCH_LIKELY (fragp->fr_subtype), |
16058 | RELAX_BRANCH_LINK (fragp->fr_subtype), | |
16059 | toofar); | |
16060 | ||
16061 | length = 4; | |
16062 | if (toofar) | |
16063 | { | |
16064 | if (fragp ? RELAX_BRANCH_LIKELY (fragp->fr_subtype) : (update > 0)) | |
16065 | length += 8; | |
16066 | ||
16067 | if (mips_pic != NO_PIC) | |
16068 | { | |
16069 | /* Additional space for PIC loading of target address. */ | |
16070 | length += 8; | |
16071 | if (mips_opts.isa == ISA_MIPS1) | |
16072 | /* Additional space for $at-stabilizing nop. */ | |
16073 | length += 4; | |
16074 | } | |
16075 | ||
16076 | /* If branch is conditional. */ | |
16077 | if (fragp ? !RELAX_BRANCH_UNCOND (fragp->fr_subtype) : (update >= 0)) | |
16078 | length += 8; | |
16079 | } | |
b34976b6 | 16080 | |
4a6a3df4 AO |
16081 | return length; |
16082 | } | |
16083 | ||
df58fc94 RS |
16084 | /* Compute the length of a branch sequence, and adjust the |
16085 | RELAX_MICROMIPS_TOOFAR32 bit accordingly. If FRAGP is NULL, the | |
16086 | worst-case length is computed, with UPDATE being used to indicate | |
16087 | whether an unconditional (-1), or regular (0) branch is to be | |
16088 | computed. */ | |
16089 | ||
16090 | static int | |
16091 | relaxed_micromips_32bit_branch_length (fragS *fragp, asection *sec, int update) | |
16092 | { | |
16093 | bfd_boolean toofar; | |
16094 | int length; | |
16095 | ||
16096 | if (fragp | |
16097 | && S_IS_DEFINED (fragp->fr_symbol) | |
16098 | && sec == S_GET_SEGMENT (fragp->fr_symbol)) | |
16099 | { | |
16100 | addressT addr; | |
16101 | offsetT val; | |
16102 | ||
16103 | val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset; | |
16104 | /* Ignore the low bit in the target, since it will be set | |
16105 | for a text label. */ | |
16106 | if ((val & 1) != 0) | |
16107 | --val; | |
16108 | ||
16109 | addr = fragp->fr_address + fragp->fr_fix + 4; | |
16110 | ||
16111 | val -= addr; | |
16112 | ||
16113 | toofar = val < - (0x8000 << 1) || val >= (0x8000 << 1); | |
16114 | } | |
16115 | else if (fragp) | |
16116 | /* If the symbol is not defined or it's in a different segment, | |
16117 | assume the user knows what's going on and emit a short | |
16118 | branch. */ | |
16119 | toofar = FALSE; | |
16120 | else | |
16121 | toofar = TRUE; | |
16122 | ||
16123 | if (fragp && update | |
16124 | && toofar != RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype)) | |
16125 | fragp->fr_subtype = (toofar | |
16126 | ? RELAX_MICROMIPS_MARK_TOOFAR32 (fragp->fr_subtype) | |
16127 | : RELAX_MICROMIPS_CLEAR_TOOFAR32 (fragp->fr_subtype)); | |
16128 | ||
16129 | length = 4; | |
16130 | if (toofar) | |
16131 | { | |
16132 | bfd_boolean compact_known = fragp != NULL; | |
16133 | bfd_boolean compact = FALSE; | |
16134 | bfd_boolean uncond; | |
16135 | ||
16136 | if (compact_known) | |
16137 | compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype); | |
16138 | if (fragp) | |
16139 | uncond = RELAX_MICROMIPS_UNCOND (fragp->fr_subtype); | |
16140 | else | |
16141 | uncond = update < 0; | |
16142 | ||
16143 | /* If label is out of range, we turn branch <br>: | |
16144 | ||
16145 | <br> label # 4 bytes | |
16146 | 0: | |
16147 | ||
16148 | into: | |
16149 | ||
16150 | j label # 4 bytes | |
16151 | nop # 2 bytes if compact && !PIC | |
16152 | 0: | |
16153 | */ | |
16154 | if (mips_pic == NO_PIC && (!compact_known || compact)) | |
16155 | length += 2; | |
16156 | ||
16157 | /* If assembling PIC code, we further turn: | |
16158 | ||
16159 | j label # 4 bytes | |
16160 | ||
16161 | into: | |
16162 | ||
16163 | lw/ld at, %got(label)(gp) # 4 bytes | |
16164 | d/addiu at, %lo(label) # 4 bytes | |
16165 | jr/c at # 2 bytes | |
16166 | */ | |
16167 | if (mips_pic != NO_PIC) | |
16168 | length += 6; | |
16169 | ||
16170 | /* If branch <br> is conditional, we prepend negated branch <brneg>: | |
16171 | ||
16172 | <brneg> 0f # 4 bytes | |
16173 | nop # 2 bytes if !compact | |
16174 | */ | |
16175 | if (!uncond) | |
16176 | length += (compact_known && compact) ? 4 : 6; | |
16177 | } | |
16178 | ||
16179 | return length; | |
16180 | } | |
16181 | ||
16182 | /* Compute the length of a branch, and adjust the RELAX_MICROMIPS_TOOFAR16 | |
16183 | bit accordingly. */ | |
16184 | ||
16185 | static int | |
16186 | relaxed_micromips_16bit_branch_length (fragS *fragp, asection *sec, int update) | |
16187 | { | |
16188 | bfd_boolean toofar; | |
16189 | ||
df58fc94 RS |
16190 | if (fragp |
16191 | && S_IS_DEFINED (fragp->fr_symbol) | |
16192 | && sec == S_GET_SEGMENT (fragp->fr_symbol)) | |
16193 | { | |
16194 | addressT addr; | |
16195 | offsetT val; | |
16196 | int type; | |
16197 | ||
16198 | val = S_GET_VALUE (fragp->fr_symbol) + fragp->fr_offset; | |
16199 | /* Ignore the low bit in the target, since it will be set | |
16200 | for a text label. */ | |
16201 | if ((val & 1) != 0) | |
16202 | --val; | |
16203 | ||
16204 | /* Assume this is a 2-byte branch. */ | |
16205 | addr = fragp->fr_address + fragp->fr_fix + 2; | |
16206 | ||
16207 | /* We try to avoid the infinite loop by not adding 2 more bytes for | |
16208 | long branches. */ | |
16209 | ||
16210 | val -= addr; | |
16211 | ||
16212 | type = RELAX_MICROMIPS_TYPE (fragp->fr_subtype); | |
16213 | if (type == 'D') | |
16214 | toofar = val < - (0x200 << 1) || val >= (0x200 << 1); | |
16215 | else if (type == 'E') | |
16216 | toofar = val < - (0x40 << 1) || val >= (0x40 << 1); | |
16217 | else | |
16218 | abort (); | |
16219 | } | |
16220 | else | |
16221 | /* If the symbol is not defined or it's in a different segment, | |
16222 | we emit a normal 32-bit branch. */ | |
16223 | toofar = TRUE; | |
16224 | ||
16225 | if (fragp && update | |
16226 | && toofar != RELAX_MICROMIPS_TOOFAR16 (fragp->fr_subtype)) | |
16227 | fragp->fr_subtype | |
16228 | = toofar ? RELAX_MICROMIPS_MARK_TOOFAR16 (fragp->fr_subtype) | |
16229 | : RELAX_MICROMIPS_CLEAR_TOOFAR16 (fragp->fr_subtype); | |
16230 | ||
16231 | if (toofar) | |
16232 | return 4; | |
16233 | ||
16234 | return 2; | |
16235 | } | |
16236 | ||
252b5132 RH |
16237 | /* Estimate the size of a frag before relaxing. Unless this is the |
16238 | mips16, we are not really relaxing here, and the final size is | |
16239 | encoded in the subtype information. For the mips16, we have to | |
16240 | decide whether we are using an extended opcode or not. */ | |
16241 | ||
252b5132 | 16242 | int |
17a2f251 | 16243 | md_estimate_size_before_relax (fragS *fragp, asection *segtype) |
252b5132 | 16244 | { |
5919d012 | 16245 | int change; |
252b5132 | 16246 | |
4a6a3df4 AO |
16247 | if (RELAX_BRANCH_P (fragp->fr_subtype)) |
16248 | { | |
16249 | ||
b34976b6 AM |
16250 | fragp->fr_var = relaxed_branch_length (fragp, segtype, FALSE); |
16251 | ||
4a6a3df4 AO |
16252 | return fragp->fr_var; |
16253 | } | |
16254 | ||
252b5132 | 16255 | if (RELAX_MIPS16_P (fragp->fr_subtype)) |
177b4a6a AO |
16256 | /* We don't want to modify the EXTENDED bit here; it might get us |
16257 | into infinite loops. We change it only in mips_relax_frag(). */ | |
16258 | return (RELAX_MIPS16_EXTENDED (fragp->fr_subtype) ? 4 : 2); | |
252b5132 | 16259 | |
df58fc94 RS |
16260 | if (RELAX_MICROMIPS_P (fragp->fr_subtype)) |
16261 | { | |
16262 | int length = 4; | |
16263 | ||
16264 | if (RELAX_MICROMIPS_TYPE (fragp->fr_subtype) != 0) | |
16265 | length = relaxed_micromips_16bit_branch_length (fragp, segtype, FALSE); | |
16266 | if (length == 4 && RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype)) | |
16267 | length = relaxed_micromips_32bit_branch_length (fragp, segtype, FALSE); | |
16268 | fragp->fr_var = length; | |
16269 | ||
16270 | return length; | |
16271 | } | |
16272 | ||
252b5132 | 16273 | if (mips_pic == NO_PIC) |
5919d012 | 16274 | change = nopic_need_relax (fragp->fr_symbol, 0); |
252b5132 | 16275 | else if (mips_pic == SVR4_PIC) |
5919d012 | 16276 | change = pic_need_relax (fragp->fr_symbol, segtype); |
0a44bf69 RS |
16277 | else if (mips_pic == VXWORKS_PIC) |
16278 | /* For vxworks, GOT16 relocations never have a corresponding LO16. */ | |
16279 | change = 0; | |
252b5132 RH |
16280 | else |
16281 | abort (); | |
16282 | ||
16283 | if (change) | |
16284 | { | |
4d7206a2 | 16285 | fragp->fr_subtype |= RELAX_USE_SECOND; |
4d7206a2 | 16286 | return -RELAX_FIRST (fragp->fr_subtype); |
252b5132 | 16287 | } |
4d7206a2 RS |
16288 | else |
16289 | return -RELAX_SECOND (fragp->fr_subtype); | |
252b5132 RH |
16290 | } |
16291 | ||
16292 | /* This is called to see whether a reloc against a defined symbol | |
de7e6852 | 16293 | should be converted into a reloc against a section. */ |
252b5132 RH |
16294 | |
16295 | int | |
17a2f251 | 16296 | mips_fix_adjustable (fixS *fixp) |
252b5132 | 16297 | { |
252b5132 RH |
16298 | if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT |
16299 | || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY) | |
16300 | return 0; | |
a161fe53 | 16301 | |
252b5132 RH |
16302 | if (fixp->fx_addsy == NULL) |
16303 | return 1; | |
a161fe53 | 16304 | |
de7e6852 RS |
16305 | /* If symbol SYM is in a mergeable section, relocations of the form |
16306 | SYM + 0 can usually be made section-relative. The mergeable data | |
16307 | is then identified by the section offset rather than by the symbol. | |
16308 | ||
16309 | However, if we're generating REL LO16 relocations, the offset is split | |
16310 | between the LO16 and parterning high part relocation. The linker will | |
16311 | need to recalculate the complete offset in order to correctly identify | |
16312 | the merge data. | |
16313 | ||
16314 | The linker has traditionally not looked for the parterning high part | |
16315 | relocation, and has thus allowed orphaned R_MIPS_LO16 relocations to be | |
16316 | placed anywhere. Rather than break backwards compatibility by changing | |
16317 | this, it seems better not to force the issue, and instead keep the | |
16318 | original symbol. This will work with either linker behavior. */ | |
738e5348 | 16319 | if ((lo16_reloc_p (fixp->fx_r_type) |
704803a9 | 16320 | || reloc_needs_lo_p (fixp->fx_r_type)) |
de7e6852 RS |
16321 | && HAVE_IN_PLACE_ADDENDS |
16322 | && (S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_MERGE) != 0) | |
16323 | return 0; | |
16324 | ||
ce70d90a | 16325 | /* There is no place to store an in-place offset for JALR relocations. |
2de39019 CM |
16326 | Likewise an in-range offset of limited PC-relative relocations may |
16327 | overflow the in-place relocatable field if recalculated against the | |
16328 | start address of the symbol's containing section. */ | |
ce70d90a | 16329 | if (HAVE_IN_PLACE_ADDENDS |
2de39019 CM |
16330 | && (limited_pcrel_reloc_p (fixp->fx_r_type) |
16331 | || jalr_reloc_p (fixp->fx_r_type))) | |
1180b5a4 RS |
16332 | return 0; |
16333 | ||
b314ec0e RS |
16334 | /* R_MIPS16_26 relocations against non-MIPS16 functions might resolve |
16335 | to a floating-point stub. The same is true for non-R_MIPS16_26 | |
16336 | relocations against MIPS16 functions; in this case, the stub becomes | |
16337 | the function's canonical address. | |
16338 | ||
16339 | Floating-point stubs are stored in unique .mips16.call.* or | |
16340 | .mips16.fn.* sections. If a stub T for function F is in section S, | |
16341 | the first relocation in section S must be against F; this is how the | |
16342 | linker determines the target function. All relocations that might | |
16343 | resolve to T must also be against F. We therefore have the following | |
16344 | restrictions, which are given in an intentionally-redundant way: | |
16345 | ||
16346 | 1. We cannot reduce R_MIPS16_26 relocations against non-MIPS16 | |
16347 | symbols. | |
16348 | ||
16349 | 2. We cannot reduce a stub's relocations against non-MIPS16 symbols | |
16350 | if that stub might be used. | |
16351 | ||
16352 | 3. We cannot reduce non-R_MIPS16_26 relocations against MIPS16 | |
16353 | symbols. | |
16354 | ||
16355 | 4. We cannot reduce a stub's relocations against MIPS16 symbols if | |
16356 | that stub might be used. | |
16357 | ||
16358 | There is a further restriction: | |
16359 | ||
df58fc94 RS |
16360 | 5. We cannot reduce jump relocations (R_MIPS_26, R_MIPS16_26 or |
16361 | R_MICROMIPS_26_S1) against MIPS16 or microMIPS symbols on | |
16362 | targets with in-place addends; the relocation field cannot | |
b314ec0e RS |
16363 | encode the low bit. |
16364 | ||
df58fc94 RS |
16365 | For simplicity, we deal with (3)-(4) by not reducing _any_ relocation |
16366 | against a MIPS16 symbol. We deal with (5) by by not reducing any | |
16367 | such relocations on REL targets. | |
b314ec0e RS |
16368 | |
16369 | We deal with (1)-(2) by saying that, if there's a R_MIPS16_26 | |
16370 | relocation against some symbol R, no relocation against R may be | |
16371 | reduced. (Note that this deals with (2) as well as (1) because | |
16372 | relocations against global symbols will never be reduced on ELF | |
16373 | targets.) This approach is a little simpler than trying to detect | |
16374 | stub sections, and gives the "all or nothing" per-symbol consistency | |
16375 | that we have for MIPS16 symbols. */ | |
f3ded42a | 16376 | if (fixp->fx_subsy == NULL |
30c09090 | 16377 | && (ELF_ST_IS_MIPS16 (S_GET_OTHER (fixp->fx_addsy)) |
df58fc94 RS |
16378 | || *symbol_get_tc (fixp->fx_addsy) |
16379 | || (HAVE_IN_PLACE_ADDENDS | |
16380 | && ELF_ST_IS_MICROMIPS (S_GET_OTHER (fixp->fx_addsy)) | |
16381 | && jmp_reloc_p (fixp->fx_r_type)))) | |
252b5132 | 16382 | return 0; |
a161fe53 | 16383 | |
252b5132 RH |
16384 | return 1; |
16385 | } | |
16386 | ||
16387 | /* Translate internal representation of relocation info to BFD target | |
16388 | format. */ | |
16389 | ||
16390 | arelent ** | |
17a2f251 | 16391 | tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) |
252b5132 RH |
16392 | { |
16393 | static arelent *retval[4]; | |
16394 | arelent *reloc; | |
16395 | bfd_reloc_code_real_type code; | |
16396 | ||
4b0cff4e TS |
16397 | memset (retval, 0, sizeof(retval)); |
16398 | reloc = retval[0] = (arelent *) xcalloc (1, sizeof (arelent)); | |
49309057 ILT |
16399 | reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); |
16400 | *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); | |
252b5132 RH |
16401 | reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; |
16402 | ||
bad36eac DJ |
16403 | if (fixp->fx_pcrel) |
16404 | { | |
df58fc94 RS |
16405 | gas_assert (fixp->fx_r_type == BFD_RELOC_16_PCREL_S2 |
16406 | || fixp->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1 | |
16407 | || fixp->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1 | |
b47468a6 CM |
16408 | || fixp->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1 |
16409 | || fixp->fx_r_type == BFD_RELOC_32_PCREL); | |
bad36eac DJ |
16410 | |
16411 | /* At this point, fx_addnumber is "symbol offset - pcrel address". | |
16412 | Relocations want only the symbol offset. */ | |
16413 | reloc->addend = fixp->fx_addnumber + reloc->address; | |
bad36eac DJ |
16414 | } |
16415 | else | |
16416 | reloc->addend = fixp->fx_addnumber; | |
252b5132 | 16417 | |
438c16b8 TS |
16418 | /* Since the old MIPS ELF ABI uses Rel instead of Rela, encode the vtable |
16419 | entry to be used in the relocation's section offset. */ | |
16420 | if (! HAVE_NEWABI && fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY) | |
252b5132 RH |
16421 | { |
16422 | reloc->address = reloc->addend; | |
16423 | reloc->addend = 0; | |
16424 | } | |
16425 | ||
252b5132 | 16426 | code = fixp->fx_r_type; |
252b5132 | 16427 | |
bad36eac | 16428 | reloc->howto = bfd_reloc_type_lookup (stdoutput, code); |
252b5132 RH |
16429 | if (reloc->howto == NULL) |
16430 | { | |
16431 | as_bad_where (fixp->fx_file, fixp->fx_line, | |
1661c76c RS |
16432 | _("cannot represent %s relocation in this object file" |
16433 | " format"), | |
252b5132 RH |
16434 | bfd_get_reloc_code_name (code)); |
16435 | retval[0] = NULL; | |
16436 | } | |
16437 | ||
16438 | return retval; | |
16439 | } | |
16440 | ||
16441 | /* Relax a machine dependent frag. This returns the amount by which | |
16442 | the current size of the frag should change. */ | |
16443 | ||
16444 | int | |
17a2f251 | 16445 | mips_relax_frag (asection *sec, fragS *fragp, long stretch) |
252b5132 | 16446 | { |
4a6a3df4 AO |
16447 | if (RELAX_BRANCH_P (fragp->fr_subtype)) |
16448 | { | |
16449 | offsetT old_var = fragp->fr_var; | |
b34976b6 AM |
16450 | |
16451 | fragp->fr_var = relaxed_branch_length (fragp, sec, TRUE); | |
4a6a3df4 AO |
16452 | |
16453 | return fragp->fr_var - old_var; | |
16454 | } | |
16455 | ||
df58fc94 RS |
16456 | if (RELAX_MICROMIPS_P (fragp->fr_subtype)) |
16457 | { | |
16458 | offsetT old_var = fragp->fr_var; | |
16459 | offsetT new_var = 4; | |
16460 | ||
16461 | if (RELAX_MICROMIPS_TYPE (fragp->fr_subtype) != 0) | |
16462 | new_var = relaxed_micromips_16bit_branch_length (fragp, sec, TRUE); | |
16463 | if (new_var == 4 && RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype)) | |
16464 | new_var = relaxed_micromips_32bit_branch_length (fragp, sec, TRUE); | |
16465 | fragp->fr_var = new_var; | |
16466 | ||
16467 | return new_var - old_var; | |
16468 | } | |
16469 | ||
252b5132 RH |
16470 | if (! RELAX_MIPS16_P (fragp->fr_subtype)) |
16471 | return 0; | |
16472 | ||
c4e7957c | 16473 | if (mips16_extended_frag (fragp, NULL, stretch)) |
252b5132 RH |
16474 | { |
16475 | if (RELAX_MIPS16_EXTENDED (fragp->fr_subtype)) | |
16476 | return 0; | |
16477 | fragp->fr_subtype = RELAX_MIPS16_MARK_EXTENDED (fragp->fr_subtype); | |
16478 | return 2; | |
16479 | } | |
16480 | else | |
16481 | { | |
16482 | if (! RELAX_MIPS16_EXTENDED (fragp->fr_subtype)) | |
16483 | return 0; | |
16484 | fragp->fr_subtype = RELAX_MIPS16_CLEAR_EXTENDED (fragp->fr_subtype); | |
16485 | return -2; | |
16486 | } | |
16487 | ||
16488 | return 0; | |
16489 | } | |
16490 | ||
16491 | /* Convert a machine dependent frag. */ | |
16492 | ||
16493 | void | |
17a2f251 | 16494 | md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT asec, fragS *fragp) |
252b5132 | 16495 | { |
4a6a3df4 AO |
16496 | if (RELAX_BRANCH_P (fragp->fr_subtype)) |
16497 | { | |
4d68580a | 16498 | char *buf; |
4a6a3df4 AO |
16499 | unsigned long insn; |
16500 | expressionS exp; | |
16501 | fixS *fixp; | |
b34976b6 | 16502 | |
4d68580a RS |
16503 | buf = fragp->fr_literal + fragp->fr_fix; |
16504 | insn = read_insn (buf); | |
b34976b6 | 16505 | |
4a6a3df4 AO |
16506 | if (!RELAX_BRANCH_TOOFAR (fragp->fr_subtype)) |
16507 | { | |
16508 | /* We generate a fixup instead of applying it right now | |
16509 | because, if there are linker relaxations, we're going to | |
16510 | need the relocations. */ | |
16511 | exp.X_op = O_symbol; | |
16512 | exp.X_add_symbol = fragp->fr_symbol; | |
16513 | exp.X_add_number = fragp->fr_offset; | |
16514 | ||
4d68580a RS |
16515 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE, |
16516 | BFD_RELOC_16_PCREL_S2); | |
4a6a3df4 AO |
16517 | fixp->fx_file = fragp->fr_file; |
16518 | fixp->fx_line = fragp->fr_line; | |
b34976b6 | 16519 | |
4d68580a | 16520 | buf = write_insn (buf, insn); |
4a6a3df4 AO |
16521 | } |
16522 | else | |
16523 | { | |
16524 | int i; | |
16525 | ||
16526 | as_warn_where (fragp->fr_file, fragp->fr_line, | |
1661c76c | 16527 | _("relaxed out-of-range branch into a jump")); |
4a6a3df4 AO |
16528 | |
16529 | if (RELAX_BRANCH_UNCOND (fragp->fr_subtype)) | |
16530 | goto uncond; | |
16531 | ||
16532 | if (!RELAX_BRANCH_LIKELY (fragp->fr_subtype)) | |
16533 | { | |
16534 | /* Reverse the branch. */ | |
16535 | switch ((insn >> 28) & 0xf) | |
16536 | { | |
16537 | case 4: | |
3bf0dbfb MR |
16538 | /* bc[0-3][tf]l? instructions can have the condition |
16539 | reversed by tweaking a single TF bit, and their | |
16540 | opcodes all have 0x4???????. */ | |
16541 | gas_assert ((insn & 0xf3e00000) == 0x41000000); | |
4a6a3df4 AO |
16542 | insn ^= 0x00010000; |
16543 | break; | |
16544 | ||
16545 | case 0: | |
16546 | /* bltz 0x04000000 bgez 0x04010000 | |
54f4ddb3 | 16547 | bltzal 0x04100000 bgezal 0x04110000 */ |
9c2799c2 | 16548 | gas_assert ((insn & 0xfc0e0000) == 0x04000000); |
4a6a3df4 AO |
16549 | insn ^= 0x00010000; |
16550 | break; | |
b34976b6 | 16551 | |
4a6a3df4 AO |
16552 | case 1: |
16553 | /* beq 0x10000000 bne 0x14000000 | |
54f4ddb3 | 16554 | blez 0x18000000 bgtz 0x1c000000 */ |
4a6a3df4 AO |
16555 | insn ^= 0x04000000; |
16556 | break; | |
16557 | ||
16558 | default: | |
16559 | abort (); | |
16560 | } | |
16561 | } | |
16562 | ||
16563 | if (RELAX_BRANCH_LINK (fragp->fr_subtype)) | |
16564 | { | |
16565 | /* Clear the and-link bit. */ | |
9c2799c2 | 16566 | gas_assert ((insn & 0xfc1c0000) == 0x04100000); |
4a6a3df4 | 16567 | |
54f4ddb3 TS |
16568 | /* bltzal 0x04100000 bgezal 0x04110000 |
16569 | bltzall 0x04120000 bgezall 0x04130000 */ | |
4a6a3df4 AO |
16570 | insn &= ~0x00100000; |
16571 | } | |
16572 | ||
16573 | /* Branch over the branch (if the branch was likely) or the | |
16574 | full jump (not likely case). Compute the offset from the | |
16575 | current instruction to branch to. */ | |
16576 | if (RELAX_BRANCH_LIKELY (fragp->fr_subtype)) | |
16577 | i = 16; | |
16578 | else | |
16579 | { | |
16580 | /* How many bytes in instructions we've already emitted? */ | |
4d68580a | 16581 | i = buf - fragp->fr_literal - fragp->fr_fix; |
4a6a3df4 AO |
16582 | /* How many bytes in instructions from here to the end? */ |
16583 | i = fragp->fr_var - i; | |
16584 | } | |
16585 | /* Convert to instruction count. */ | |
16586 | i >>= 2; | |
16587 | /* Branch counts from the next instruction. */ | |
b34976b6 | 16588 | i--; |
4a6a3df4 AO |
16589 | insn |= i; |
16590 | /* Branch over the jump. */ | |
4d68580a | 16591 | buf = write_insn (buf, insn); |
4a6a3df4 | 16592 | |
54f4ddb3 | 16593 | /* nop */ |
4d68580a | 16594 | buf = write_insn (buf, 0); |
4a6a3df4 AO |
16595 | |
16596 | if (RELAX_BRANCH_LIKELY (fragp->fr_subtype)) | |
16597 | { | |
16598 | /* beql $0, $0, 2f */ | |
16599 | insn = 0x50000000; | |
16600 | /* Compute the PC offset from the current instruction to | |
16601 | the end of the variable frag. */ | |
16602 | /* How many bytes in instructions we've already emitted? */ | |
4d68580a | 16603 | i = buf - fragp->fr_literal - fragp->fr_fix; |
4a6a3df4 AO |
16604 | /* How many bytes in instructions from here to the end? */ |
16605 | i = fragp->fr_var - i; | |
16606 | /* Convert to instruction count. */ | |
16607 | i >>= 2; | |
16608 | /* Don't decrement i, because we want to branch over the | |
16609 | delay slot. */ | |
4a6a3df4 | 16610 | insn |= i; |
4a6a3df4 | 16611 | |
4d68580a RS |
16612 | buf = write_insn (buf, insn); |
16613 | buf = write_insn (buf, 0); | |
4a6a3df4 AO |
16614 | } |
16615 | ||
16616 | uncond: | |
16617 | if (mips_pic == NO_PIC) | |
16618 | { | |
16619 | /* j or jal. */ | |
16620 | insn = (RELAX_BRANCH_LINK (fragp->fr_subtype) | |
16621 | ? 0x0c000000 : 0x08000000); | |
16622 | exp.X_op = O_symbol; | |
16623 | exp.X_add_symbol = fragp->fr_symbol; | |
16624 | exp.X_add_number = fragp->fr_offset; | |
16625 | ||
4d68580a RS |
16626 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, |
16627 | FALSE, BFD_RELOC_MIPS_JMP); | |
4a6a3df4 AO |
16628 | fixp->fx_file = fragp->fr_file; |
16629 | fixp->fx_line = fragp->fr_line; | |
16630 | ||
4d68580a | 16631 | buf = write_insn (buf, insn); |
4a6a3df4 AO |
16632 | } |
16633 | else | |
16634 | { | |
66b3e8da MR |
16635 | unsigned long at = RELAX_BRANCH_AT (fragp->fr_subtype); |
16636 | ||
4a6a3df4 | 16637 | /* lw/ld $at, <sym>($gp) R_MIPS_GOT16 */ |
66b3e8da MR |
16638 | insn = HAVE_64BIT_ADDRESSES ? 0xdf800000 : 0x8f800000; |
16639 | insn |= at << OP_SH_RT; | |
4a6a3df4 AO |
16640 | exp.X_op = O_symbol; |
16641 | exp.X_add_symbol = fragp->fr_symbol; | |
16642 | exp.X_add_number = fragp->fr_offset; | |
16643 | ||
16644 | if (fragp->fr_offset) | |
16645 | { | |
16646 | exp.X_add_symbol = make_expr_symbol (&exp); | |
16647 | exp.X_add_number = 0; | |
16648 | } | |
16649 | ||
4d68580a RS |
16650 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, |
16651 | FALSE, BFD_RELOC_MIPS_GOT16); | |
4a6a3df4 AO |
16652 | fixp->fx_file = fragp->fr_file; |
16653 | fixp->fx_line = fragp->fr_line; | |
16654 | ||
4d68580a | 16655 | buf = write_insn (buf, insn); |
b34976b6 | 16656 | |
4a6a3df4 | 16657 | if (mips_opts.isa == ISA_MIPS1) |
4d68580a RS |
16658 | /* nop */ |
16659 | buf = write_insn (buf, 0); | |
4a6a3df4 AO |
16660 | |
16661 | /* d/addiu $at, $at, <sym> R_MIPS_LO16 */ | |
66b3e8da MR |
16662 | insn = HAVE_64BIT_ADDRESSES ? 0x64000000 : 0x24000000; |
16663 | insn |= at << OP_SH_RS | at << OP_SH_RT; | |
4a6a3df4 | 16664 | |
4d68580a RS |
16665 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, |
16666 | FALSE, BFD_RELOC_LO16); | |
4a6a3df4 AO |
16667 | fixp->fx_file = fragp->fr_file; |
16668 | fixp->fx_line = fragp->fr_line; | |
b34976b6 | 16669 | |
4d68580a | 16670 | buf = write_insn (buf, insn); |
4a6a3df4 AO |
16671 | |
16672 | /* j(al)r $at. */ | |
16673 | if (RELAX_BRANCH_LINK (fragp->fr_subtype)) | |
66b3e8da | 16674 | insn = 0x0000f809; |
4a6a3df4 | 16675 | else |
66b3e8da MR |
16676 | insn = 0x00000008; |
16677 | insn |= at << OP_SH_RS; | |
4a6a3df4 | 16678 | |
4d68580a | 16679 | buf = write_insn (buf, insn); |
4a6a3df4 AO |
16680 | } |
16681 | } | |
16682 | ||
4a6a3df4 | 16683 | fragp->fr_fix += fragp->fr_var; |
4d68580a | 16684 | gas_assert (buf == fragp->fr_literal + fragp->fr_fix); |
4a6a3df4 AO |
16685 | return; |
16686 | } | |
16687 | ||
df58fc94 RS |
16688 | /* Relax microMIPS branches. */ |
16689 | if (RELAX_MICROMIPS_P (fragp->fr_subtype)) | |
16690 | { | |
4d68580a | 16691 | char *buf = fragp->fr_literal + fragp->fr_fix; |
df58fc94 RS |
16692 | bfd_boolean compact = RELAX_MICROMIPS_COMPACT (fragp->fr_subtype); |
16693 | bfd_boolean al = RELAX_MICROMIPS_LINK (fragp->fr_subtype); | |
16694 | int type = RELAX_MICROMIPS_TYPE (fragp->fr_subtype); | |
2309ddf2 | 16695 | bfd_boolean short_ds; |
df58fc94 RS |
16696 | unsigned long insn; |
16697 | expressionS exp; | |
16698 | fixS *fixp; | |
16699 | ||
16700 | exp.X_op = O_symbol; | |
16701 | exp.X_add_symbol = fragp->fr_symbol; | |
16702 | exp.X_add_number = fragp->fr_offset; | |
16703 | ||
16704 | fragp->fr_fix += fragp->fr_var; | |
16705 | ||
16706 | /* Handle 16-bit branches that fit or are forced to fit. */ | |
16707 | if (type != 0 && !RELAX_MICROMIPS_TOOFAR16 (fragp->fr_subtype)) | |
16708 | { | |
16709 | /* We generate a fixup instead of applying it right now, | |
16710 | because if there is linker relaxation, we're going to | |
16711 | need the relocations. */ | |
16712 | if (type == 'D') | |
4d68580a | 16713 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE, |
df58fc94 RS |
16714 | BFD_RELOC_MICROMIPS_10_PCREL_S1); |
16715 | else if (type == 'E') | |
4d68580a | 16716 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 2, &exp, TRUE, |
df58fc94 RS |
16717 | BFD_RELOC_MICROMIPS_7_PCREL_S1); |
16718 | else | |
16719 | abort (); | |
16720 | ||
16721 | fixp->fx_file = fragp->fr_file; | |
16722 | fixp->fx_line = fragp->fr_line; | |
16723 | ||
16724 | /* These relocations can have an addend that won't fit in | |
16725 | 2 octets. */ | |
16726 | fixp->fx_no_overflow = 1; | |
16727 | ||
16728 | return; | |
16729 | } | |
16730 | ||
2309ddf2 | 16731 | /* Handle 32-bit branches that fit or are forced to fit. */ |
df58fc94 RS |
16732 | if (!RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype) |
16733 | || !RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype)) | |
16734 | { | |
16735 | /* We generate a fixup instead of applying it right now, | |
16736 | because if there is linker relaxation, we're going to | |
16737 | need the relocations. */ | |
4d68580a RS |
16738 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, TRUE, |
16739 | BFD_RELOC_MICROMIPS_16_PCREL_S1); | |
df58fc94 RS |
16740 | fixp->fx_file = fragp->fr_file; |
16741 | fixp->fx_line = fragp->fr_line; | |
16742 | ||
16743 | if (type == 0) | |
16744 | return; | |
16745 | } | |
16746 | ||
16747 | /* Relax 16-bit branches to 32-bit branches. */ | |
16748 | if (type != 0) | |
16749 | { | |
4d68580a | 16750 | insn = read_compressed_insn (buf, 2); |
df58fc94 RS |
16751 | |
16752 | if ((insn & 0xfc00) == 0xcc00) /* b16 */ | |
16753 | insn = 0x94000000; /* beq */ | |
16754 | else if ((insn & 0xdc00) == 0x8c00) /* beqz16/bnez16 */ | |
16755 | { | |
16756 | unsigned long regno; | |
16757 | ||
16758 | regno = (insn >> MICROMIPSOP_SH_MD) & MICROMIPSOP_MASK_MD; | |
16759 | regno = micromips_to_32_reg_d_map [regno]; | |
16760 | insn = ((insn & 0x2000) << 16) | 0x94000000; /* beq/bne */ | |
16761 | insn |= regno << MICROMIPSOP_SH_RS; | |
16762 | } | |
16763 | else | |
16764 | abort (); | |
16765 | ||
16766 | /* Nothing else to do, just write it out. */ | |
16767 | if (!RELAX_MICROMIPS_RELAX32 (fragp->fr_subtype) | |
16768 | || !RELAX_MICROMIPS_TOOFAR32 (fragp->fr_subtype)) | |
16769 | { | |
4d68580a RS |
16770 | buf = write_compressed_insn (buf, insn, 4); |
16771 | gas_assert (buf == fragp->fr_literal + fragp->fr_fix); | |
df58fc94 RS |
16772 | return; |
16773 | } | |
16774 | } | |
16775 | else | |
4d68580a | 16776 | insn = read_compressed_insn (buf, 4); |
df58fc94 RS |
16777 | |
16778 | /* Relax 32-bit branches to a sequence of instructions. */ | |
16779 | as_warn_where (fragp->fr_file, fragp->fr_line, | |
1661c76c | 16780 | _("relaxed out-of-range branch into a jump")); |
df58fc94 | 16781 | |
2309ddf2 MR |
16782 | /* Set the short-delay-slot bit. */ |
16783 | short_ds = al && (insn & 0x02000000) != 0; | |
df58fc94 RS |
16784 | |
16785 | if (!RELAX_MICROMIPS_UNCOND (fragp->fr_subtype)) | |
16786 | { | |
16787 | symbolS *l; | |
16788 | ||
16789 | /* Reverse the branch. */ | |
16790 | if ((insn & 0xfc000000) == 0x94000000 /* beq */ | |
16791 | || (insn & 0xfc000000) == 0xb4000000) /* bne */ | |
16792 | insn ^= 0x20000000; | |
16793 | else if ((insn & 0xffe00000) == 0x40000000 /* bltz */ | |
16794 | || (insn & 0xffe00000) == 0x40400000 /* bgez */ | |
16795 | || (insn & 0xffe00000) == 0x40800000 /* blez */ | |
16796 | || (insn & 0xffe00000) == 0x40c00000 /* bgtz */ | |
16797 | || (insn & 0xffe00000) == 0x40a00000 /* bnezc */ | |
16798 | || (insn & 0xffe00000) == 0x40e00000 /* beqzc */ | |
16799 | || (insn & 0xffe00000) == 0x40200000 /* bltzal */ | |
16800 | || (insn & 0xffe00000) == 0x40600000 /* bgezal */ | |
16801 | || (insn & 0xffe00000) == 0x42200000 /* bltzals */ | |
16802 | || (insn & 0xffe00000) == 0x42600000) /* bgezals */ | |
16803 | insn ^= 0x00400000; | |
16804 | else if ((insn & 0xffe30000) == 0x43800000 /* bc1f */ | |
16805 | || (insn & 0xffe30000) == 0x43a00000 /* bc1t */ | |
16806 | || (insn & 0xffe30000) == 0x42800000 /* bc2f */ | |
16807 | || (insn & 0xffe30000) == 0x42a00000) /* bc2t */ | |
16808 | insn ^= 0x00200000; | |
16809 | else | |
16810 | abort (); | |
16811 | ||
16812 | if (al) | |
16813 | { | |
16814 | /* Clear the and-link and short-delay-slot bits. */ | |
16815 | gas_assert ((insn & 0xfda00000) == 0x40200000); | |
16816 | ||
16817 | /* bltzal 0x40200000 bgezal 0x40600000 */ | |
16818 | /* bltzals 0x42200000 bgezals 0x42600000 */ | |
16819 | insn &= ~0x02200000; | |
16820 | } | |
16821 | ||
16822 | /* Make a label at the end for use with the branch. */ | |
16823 | l = symbol_new (micromips_label_name (), asec, fragp->fr_fix, fragp); | |
16824 | micromips_label_inc (); | |
f3ded42a | 16825 | S_SET_OTHER (l, ELF_ST_SET_MICROMIPS (S_GET_OTHER (l))); |
df58fc94 RS |
16826 | |
16827 | /* Refer to it. */ | |
4d68580a RS |
16828 | fixp = fix_new (fragp, buf - fragp->fr_literal, 4, l, 0, TRUE, |
16829 | BFD_RELOC_MICROMIPS_16_PCREL_S1); | |
df58fc94 RS |
16830 | fixp->fx_file = fragp->fr_file; |
16831 | fixp->fx_line = fragp->fr_line; | |
16832 | ||
16833 | /* Branch over the jump. */ | |
4d68580a | 16834 | buf = write_compressed_insn (buf, insn, 4); |
df58fc94 | 16835 | if (!compact) |
4d68580a RS |
16836 | /* nop */ |
16837 | buf = write_compressed_insn (buf, 0x0c00, 2); | |
df58fc94 RS |
16838 | } |
16839 | ||
16840 | if (mips_pic == NO_PIC) | |
16841 | { | |
2309ddf2 MR |
16842 | unsigned long jal = short_ds ? 0x74000000 : 0xf4000000; /* jal/s */ |
16843 | ||
df58fc94 RS |
16844 | /* j/jal/jals <sym> R_MICROMIPS_26_S1 */ |
16845 | insn = al ? jal : 0xd4000000; | |
16846 | ||
4d68580a RS |
16847 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE, |
16848 | BFD_RELOC_MICROMIPS_JMP); | |
df58fc94 RS |
16849 | fixp->fx_file = fragp->fr_file; |
16850 | fixp->fx_line = fragp->fr_line; | |
16851 | ||
4d68580a | 16852 | buf = write_compressed_insn (buf, insn, 4); |
df58fc94 | 16853 | if (compact) |
4d68580a RS |
16854 | /* nop */ |
16855 | buf = write_compressed_insn (buf, 0x0c00, 2); | |
df58fc94 RS |
16856 | } |
16857 | else | |
16858 | { | |
16859 | unsigned long at = RELAX_MICROMIPS_AT (fragp->fr_subtype); | |
2309ddf2 MR |
16860 | unsigned long jalr = short_ds ? 0x45e0 : 0x45c0; /* jalr/s */ |
16861 | unsigned long jr = compact ? 0x45a0 : 0x4580; /* jr/c */ | |
df58fc94 RS |
16862 | |
16863 | /* lw/ld $at, <sym>($gp) R_MICROMIPS_GOT16 */ | |
16864 | insn = HAVE_64BIT_ADDRESSES ? 0xdc1c0000 : 0xfc1c0000; | |
16865 | insn |= at << MICROMIPSOP_SH_RT; | |
16866 | ||
16867 | if (exp.X_add_number) | |
16868 | { | |
16869 | exp.X_add_symbol = make_expr_symbol (&exp); | |
16870 | exp.X_add_number = 0; | |
16871 | } | |
16872 | ||
4d68580a RS |
16873 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE, |
16874 | BFD_RELOC_MICROMIPS_GOT16); | |
df58fc94 RS |
16875 | fixp->fx_file = fragp->fr_file; |
16876 | fixp->fx_line = fragp->fr_line; | |
16877 | ||
4d68580a | 16878 | buf = write_compressed_insn (buf, insn, 4); |
df58fc94 RS |
16879 | |
16880 | /* d/addiu $at, $at, <sym> R_MICROMIPS_LO16 */ | |
16881 | insn = HAVE_64BIT_ADDRESSES ? 0x5c000000 : 0x30000000; | |
16882 | insn |= at << MICROMIPSOP_SH_RT | at << MICROMIPSOP_SH_RS; | |
16883 | ||
4d68580a RS |
16884 | fixp = fix_new_exp (fragp, buf - fragp->fr_literal, 4, &exp, FALSE, |
16885 | BFD_RELOC_MICROMIPS_LO16); | |
df58fc94 RS |
16886 | fixp->fx_file = fragp->fr_file; |
16887 | fixp->fx_line = fragp->fr_line; | |
16888 | ||
4d68580a | 16889 | buf = write_compressed_insn (buf, insn, 4); |
df58fc94 RS |
16890 | |
16891 | /* jr/jrc/jalr/jalrs $at */ | |
16892 | insn = al ? jalr : jr; | |
16893 | insn |= at << MICROMIPSOP_SH_MJ; | |
16894 | ||
4d68580a | 16895 | buf = write_compressed_insn (buf, insn, 2); |
df58fc94 RS |
16896 | } |
16897 | ||
4d68580a | 16898 | gas_assert (buf == fragp->fr_literal + fragp->fr_fix); |
df58fc94 RS |
16899 | return; |
16900 | } | |
16901 | ||
252b5132 RH |
16902 | if (RELAX_MIPS16_P (fragp->fr_subtype)) |
16903 | { | |
16904 | int type; | |
3ccad066 | 16905 | const struct mips_int_operand *operand; |
252b5132 | 16906 | offsetT val; |
5c04167a RS |
16907 | char *buf; |
16908 | unsigned int user_length, length; | |
252b5132 | 16909 | unsigned long insn; |
5c04167a | 16910 | bfd_boolean ext; |
252b5132 RH |
16911 | |
16912 | type = RELAX_MIPS16_TYPE (fragp->fr_subtype); | |
3ccad066 | 16913 | operand = mips16_immed_operand (type, FALSE); |
252b5132 | 16914 | |
5c04167a | 16915 | ext = RELAX_MIPS16_EXTENDED (fragp->fr_subtype); |
5f5f22c0 | 16916 | val = resolve_symbol_value (fragp->fr_symbol); |
3ccad066 | 16917 | if (operand->root.type == OP_PCREL) |
252b5132 | 16918 | { |
3ccad066 | 16919 | const struct mips_pcrel_operand *pcrel_op; |
252b5132 RH |
16920 | addressT addr; |
16921 | ||
3ccad066 | 16922 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
252b5132 RH |
16923 | addr = fragp->fr_address + fragp->fr_fix; |
16924 | ||
16925 | /* The rules for the base address of a PC relative reloc are | |
16926 | complicated; see mips16_extended_frag. */ | |
3ccad066 | 16927 | if (pcrel_op->include_isa_bit) |
252b5132 RH |
16928 | { |
16929 | addr += 2; | |
16930 | if (ext) | |
16931 | addr += 2; | |
16932 | /* Ignore the low bit in the target, since it will be | |
16933 | set for a text label. */ | |
3ccad066 | 16934 | val &= -2; |
252b5132 RH |
16935 | } |
16936 | else if (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype)) | |
16937 | addr -= 4; | |
16938 | else if (RELAX_MIPS16_DSLOT (fragp->fr_subtype)) | |
16939 | addr -= 2; | |
16940 | ||
3ccad066 | 16941 | addr &= -(1 << pcrel_op->align_log2); |
252b5132 RH |
16942 | val -= addr; |
16943 | ||
16944 | /* Make sure the section winds up with the alignment we have | |
16945 | assumed. */ | |
3ccad066 RS |
16946 | if (operand->shift > 0) |
16947 | record_alignment (asec, operand->shift); | |
252b5132 RH |
16948 | } |
16949 | ||
16950 | if (ext | |
16951 | && (RELAX_MIPS16_JAL_DSLOT (fragp->fr_subtype) | |
16952 | || RELAX_MIPS16_DSLOT (fragp->fr_subtype))) | |
16953 | as_warn_where (fragp->fr_file, fragp->fr_line, | |
16954 | _("extended instruction in delay slot")); | |
16955 | ||
5c04167a | 16956 | buf = fragp->fr_literal + fragp->fr_fix; |
252b5132 | 16957 | |
4d68580a | 16958 | insn = read_compressed_insn (buf, 2); |
5c04167a RS |
16959 | if (ext) |
16960 | insn |= MIPS16_EXTEND; | |
252b5132 | 16961 | |
5c04167a RS |
16962 | if (RELAX_MIPS16_USER_EXT (fragp->fr_subtype)) |
16963 | user_length = 4; | |
16964 | else if (RELAX_MIPS16_USER_SMALL (fragp->fr_subtype)) | |
16965 | user_length = 2; | |
16966 | else | |
16967 | user_length = 0; | |
16968 | ||
43c0598f | 16969 | mips16_immed (fragp->fr_file, fragp->fr_line, type, |
c150d1d2 | 16970 | BFD_RELOC_UNUSED, val, user_length, &insn); |
252b5132 | 16971 | |
5c04167a RS |
16972 | length = (ext ? 4 : 2); |
16973 | gas_assert (mips16_opcode_length (insn) == length); | |
16974 | write_compressed_insn (buf, insn, length); | |
16975 | fragp->fr_fix += length; | |
252b5132 RH |
16976 | } |
16977 | else | |
16978 | { | |
df58fc94 RS |
16979 | relax_substateT subtype = fragp->fr_subtype; |
16980 | bfd_boolean second_longer = (subtype & RELAX_SECOND_LONGER) != 0; | |
16981 | bfd_boolean use_second = (subtype & RELAX_USE_SECOND) != 0; | |
4d7206a2 RS |
16982 | int first, second; |
16983 | fixS *fixp; | |
252b5132 | 16984 | |
df58fc94 RS |
16985 | first = RELAX_FIRST (subtype); |
16986 | second = RELAX_SECOND (subtype); | |
4d7206a2 | 16987 | fixp = (fixS *) fragp->fr_opcode; |
252b5132 | 16988 | |
df58fc94 RS |
16989 | /* If the delay slot chosen does not match the size of the instruction, |
16990 | then emit a warning. */ | |
16991 | if ((!use_second && (subtype & RELAX_DELAY_SLOT_SIZE_FIRST) != 0) | |
16992 | || (use_second && (subtype & RELAX_DELAY_SLOT_SIZE_SECOND) != 0)) | |
16993 | { | |
16994 | relax_substateT s; | |
16995 | const char *msg; | |
16996 | ||
16997 | s = subtype & (RELAX_DELAY_SLOT_16BIT | |
16998 | | RELAX_DELAY_SLOT_SIZE_FIRST | |
16999 | | RELAX_DELAY_SLOT_SIZE_SECOND); | |
17000 | msg = macro_warning (s); | |
17001 | if (msg != NULL) | |
db9b2be4 | 17002 | as_warn_where (fragp->fr_file, fragp->fr_line, "%s", msg); |
df58fc94 RS |
17003 | subtype &= ~s; |
17004 | } | |
17005 | ||
584892a6 | 17006 | /* Possibly emit a warning if we've chosen the longer option. */ |
df58fc94 | 17007 | if (use_second == second_longer) |
584892a6 | 17008 | { |
df58fc94 RS |
17009 | relax_substateT s; |
17010 | const char *msg; | |
17011 | ||
17012 | s = (subtype | |
17013 | & (RELAX_SECOND_LONGER | RELAX_NOMACRO | RELAX_DELAY_SLOT)); | |
17014 | msg = macro_warning (s); | |
17015 | if (msg != NULL) | |
db9b2be4 | 17016 | as_warn_where (fragp->fr_file, fragp->fr_line, "%s", msg); |
df58fc94 | 17017 | subtype &= ~s; |
584892a6 RS |
17018 | } |
17019 | ||
4d7206a2 RS |
17020 | /* Go through all the fixups for the first sequence. Disable them |
17021 | (by marking them as done) if we're going to use the second | |
17022 | sequence instead. */ | |
17023 | while (fixp | |
17024 | && fixp->fx_frag == fragp | |
17025 | && fixp->fx_where < fragp->fr_fix - second) | |
17026 | { | |
df58fc94 | 17027 | if (subtype & RELAX_USE_SECOND) |
4d7206a2 RS |
17028 | fixp->fx_done = 1; |
17029 | fixp = fixp->fx_next; | |
17030 | } | |
252b5132 | 17031 | |
4d7206a2 RS |
17032 | /* Go through the fixups for the second sequence. Disable them if |
17033 | we're going to use the first sequence, otherwise adjust their | |
17034 | addresses to account for the relaxation. */ | |
17035 | while (fixp && fixp->fx_frag == fragp) | |
17036 | { | |
df58fc94 | 17037 | if (subtype & RELAX_USE_SECOND) |
4d7206a2 RS |
17038 | fixp->fx_where -= first; |
17039 | else | |
17040 | fixp->fx_done = 1; | |
17041 | fixp = fixp->fx_next; | |
17042 | } | |
17043 | ||
17044 | /* Now modify the frag contents. */ | |
df58fc94 | 17045 | if (subtype & RELAX_USE_SECOND) |
4d7206a2 RS |
17046 | { |
17047 | char *start; | |
17048 | ||
17049 | start = fragp->fr_literal + fragp->fr_fix - first - second; | |
17050 | memmove (start, start + first, second); | |
17051 | fragp->fr_fix -= first; | |
17052 | } | |
17053 | else | |
17054 | fragp->fr_fix -= second; | |
252b5132 RH |
17055 | } |
17056 | } | |
17057 | ||
252b5132 RH |
17058 | /* This function is called after the relocs have been generated. |
17059 | We've been storing mips16 text labels as odd. Here we convert them | |
17060 | back to even for the convenience of the debugger. */ | |
17061 | ||
17062 | void | |
17a2f251 | 17063 | mips_frob_file_after_relocs (void) |
252b5132 RH |
17064 | { |
17065 | asymbol **syms; | |
17066 | unsigned int count, i; | |
17067 | ||
252b5132 RH |
17068 | syms = bfd_get_outsymbols (stdoutput); |
17069 | count = bfd_get_symcount (stdoutput); | |
17070 | for (i = 0; i < count; i++, syms++) | |
df58fc94 RS |
17071 | if (ELF_ST_IS_COMPRESSED (elf_symbol (*syms)->internal_elf_sym.st_other) |
17072 | && ((*syms)->value & 1) != 0) | |
17073 | { | |
17074 | (*syms)->value &= ~1; | |
17075 | /* If the symbol has an odd size, it was probably computed | |
17076 | incorrectly, so adjust that as well. */ | |
17077 | if ((elf_symbol (*syms)->internal_elf_sym.st_size & 1) != 0) | |
17078 | ++elf_symbol (*syms)->internal_elf_sym.st_size; | |
17079 | } | |
252b5132 RH |
17080 | } |
17081 | ||
a1facbec MR |
17082 | /* This function is called whenever a label is defined, including fake |
17083 | labels instantiated off the dot special symbol. It is used when | |
17084 | handling branch delays; if a branch has a label, we assume we cannot | |
17085 | move it. This also bumps the value of the symbol by 1 in compressed | |
17086 | code. */ | |
252b5132 | 17087 | |
e1b47bd5 | 17088 | static void |
a1facbec | 17089 | mips_record_label (symbolS *sym) |
252b5132 | 17090 | { |
a8dbcb85 | 17091 | segment_info_type *si = seg_info (now_seg); |
252b5132 RH |
17092 | struct insn_label_list *l; |
17093 | ||
17094 | if (free_insn_labels == NULL) | |
17095 | l = (struct insn_label_list *) xmalloc (sizeof *l); | |
17096 | else | |
17097 | { | |
17098 | l = free_insn_labels; | |
17099 | free_insn_labels = l->next; | |
17100 | } | |
17101 | ||
17102 | l->label = sym; | |
a8dbcb85 TS |
17103 | l->next = si->label_list; |
17104 | si->label_list = l; | |
a1facbec | 17105 | } |
07a53e5c | 17106 | |
a1facbec MR |
17107 | /* This function is called as tc_frob_label() whenever a label is defined |
17108 | and adds a DWARF-2 record we only want for true labels. */ | |
17109 | ||
17110 | void | |
17111 | mips_define_label (symbolS *sym) | |
17112 | { | |
17113 | mips_record_label (sym); | |
07a53e5c | 17114 | dwarf2_emit_label (sym); |
252b5132 | 17115 | } |
e1b47bd5 RS |
17116 | |
17117 | /* This function is called by tc_new_dot_label whenever a new dot symbol | |
17118 | is defined. */ | |
17119 | ||
17120 | void | |
17121 | mips_add_dot_label (symbolS *sym) | |
17122 | { | |
17123 | mips_record_label (sym); | |
17124 | if (mips_assembling_insn && HAVE_CODE_COMPRESSION) | |
17125 | mips_compressed_mark_label (sym); | |
17126 | } | |
252b5132 | 17127 | \f |
252b5132 RH |
17128 | /* Some special processing for a MIPS ELF file. */ |
17129 | ||
17130 | void | |
17a2f251 | 17131 | mips_elf_final_processing (void) |
252b5132 RH |
17132 | { |
17133 | /* Write out the register information. */ | |
316f5878 | 17134 | if (mips_abi != N64_ABI) |
252b5132 RH |
17135 | { |
17136 | Elf32_RegInfo s; | |
17137 | ||
17138 | s.ri_gprmask = mips_gprmask; | |
17139 | s.ri_cprmask[0] = mips_cprmask[0]; | |
17140 | s.ri_cprmask[1] = mips_cprmask[1]; | |
17141 | s.ri_cprmask[2] = mips_cprmask[2]; | |
17142 | s.ri_cprmask[3] = mips_cprmask[3]; | |
17143 | /* The gp_value field is set by the MIPS ELF backend. */ | |
17144 | ||
17145 | bfd_mips_elf32_swap_reginfo_out (stdoutput, &s, | |
17146 | ((Elf32_External_RegInfo *) | |
17147 | mips_regmask_frag)); | |
17148 | } | |
17149 | else | |
17150 | { | |
17151 | Elf64_Internal_RegInfo s; | |
17152 | ||
17153 | s.ri_gprmask = mips_gprmask; | |
17154 | s.ri_pad = 0; | |
17155 | s.ri_cprmask[0] = mips_cprmask[0]; | |
17156 | s.ri_cprmask[1] = mips_cprmask[1]; | |
17157 | s.ri_cprmask[2] = mips_cprmask[2]; | |
17158 | s.ri_cprmask[3] = mips_cprmask[3]; | |
17159 | /* The gp_value field is set by the MIPS ELF backend. */ | |
17160 | ||
17161 | bfd_mips_elf64_swap_reginfo_out (stdoutput, &s, | |
17162 | ((Elf64_External_RegInfo *) | |
17163 | mips_regmask_frag)); | |
17164 | } | |
17165 | ||
17166 | /* Set the MIPS ELF flag bits. FIXME: There should probably be some | |
17167 | sort of BFD interface for this. */ | |
17168 | if (mips_any_noreorder) | |
17169 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NOREORDER; | |
17170 | if (mips_pic != NO_PIC) | |
143d77c5 | 17171 | { |
8b828383 | 17172 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_PIC; |
143d77c5 EC |
17173 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_CPIC; |
17174 | } | |
17175 | if (mips_abicalls) | |
17176 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_CPIC; | |
252b5132 | 17177 | |
b015e599 AP |
17178 | /* Set MIPS ELF flags for ASEs. Note that not all ASEs have flags |
17179 | defined at present; this might need to change in future. */ | |
a4672219 TS |
17180 | if (file_ase_mips16) |
17181 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_M16; | |
df58fc94 RS |
17182 | if (file_ase_micromips) |
17183 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MICROMIPS; | |
846ef2d0 | 17184 | if (file_ase & ASE_MDMX) |
deec1734 | 17185 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ARCH_ASE_MDMX; |
1f25f5d3 | 17186 | |
bdaaa2e1 | 17187 | /* Set the MIPS ELF ABI flags. */ |
316f5878 | 17188 | if (mips_abi == O32_ABI && USE_E_MIPS_ABI_O32) |
252b5132 | 17189 | elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O32; |
316f5878 | 17190 | else if (mips_abi == O64_ABI) |
252b5132 | 17191 | elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_O64; |
316f5878 | 17192 | else if (mips_abi == EABI_ABI) |
252b5132 | 17193 | { |
316f5878 | 17194 | if (!file_mips_gp32) |
252b5132 RH |
17195 | elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI64; |
17196 | else | |
17197 | elf_elfheader (stdoutput)->e_flags |= E_MIPS_ABI_EABI32; | |
17198 | } | |
316f5878 | 17199 | else if (mips_abi == N32_ABI) |
be00bddd TS |
17200 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_ABI2; |
17201 | ||
c9914766 | 17202 | /* Nothing to do for N64_ABI. */ |
252b5132 RH |
17203 | |
17204 | if (mips_32bitmode) | |
17205 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_32BITMODE; | |
ad3fea08 | 17206 | |
ba92f887 MR |
17207 | if (mips_flag_nan2008) |
17208 | elf_elfheader (stdoutput)->e_flags |= EF_MIPS_NAN2008; | |
17209 | ||
ad3fea08 TS |
17210 | #if 0 /* XXX FIXME */ |
17211 | /* 32 bit code with 64 bit FP registers. */ | |
17212 | if (!file_mips_fp32 && ABI_NEEDS_32BIT_REGS (mips_abi)) | |
17213 | elf_elfheader (stdoutput)->e_flags |= ???; | |
17214 | #endif | |
252b5132 | 17215 | } |
252b5132 | 17216 | \f |
beae10d5 | 17217 | typedef struct proc { |
9b2f1d35 EC |
17218 | symbolS *func_sym; |
17219 | symbolS *func_end_sym; | |
beae10d5 KH |
17220 | unsigned long reg_mask; |
17221 | unsigned long reg_offset; | |
17222 | unsigned long fpreg_mask; | |
17223 | unsigned long fpreg_offset; | |
17224 | unsigned long frame_offset; | |
17225 | unsigned long frame_reg; | |
17226 | unsigned long pc_reg; | |
17227 | } procS; | |
252b5132 RH |
17228 | |
17229 | static procS cur_proc; | |
17230 | static procS *cur_proc_ptr; | |
17231 | static int numprocs; | |
17232 | ||
df58fc94 RS |
17233 | /* Implement NOP_OPCODE. We encode a MIPS16 nop as "1", a microMIPS nop |
17234 | as "2", and a normal nop as "0". */ | |
17235 | ||
17236 | #define NOP_OPCODE_MIPS 0 | |
17237 | #define NOP_OPCODE_MIPS16 1 | |
17238 | #define NOP_OPCODE_MICROMIPS 2 | |
742a56fe RS |
17239 | |
17240 | char | |
17241 | mips_nop_opcode (void) | |
17242 | { | |
df58fc94 RS |
17243 | if (seg_info (now_seg)->tc_segment_info_data.micromips) |
17244 | return NOP_OPCODE_MICROMIPS; | |
17245 | else if (seg_info (now_seg)->tc_segment_info_data.mips16) | |
17246 | return NOP_OPCODE_MIPS16; | |
17247 | else | |
17248 | return NOP_OPCODE_MIPS; | |
742a56fe RS |
17249 | } |
17250 | ||
df58fc94 RS |
17251 | /* Fill in an rs_align_code fragment. Unlike elsewhere we want to use |
17252 | 32-bit microMIPS NOPs here (if applicable). */ | |
a19d8eb0 | 17253 | |
0a9ef439 | 17254 | void |
17a2f251 | 17255 | mips_handle_align (fragS *fragp) |
a19d8eb0 | 17256 | { |
df58fc94 | 17257 | char nop_opcode; |
742a56fe | 17258 | char *p; |
c67a084a NC |
17259 | int bytes, size, excess; |
17260 | valueT opcode; | |
742a56fe | 17261 | |
0a9ef439 RH |
17262 | if (fragp->fr_type != rs_align_code) |
17263 | return; | |
17264 | ||
742a56fe | 17265 | p = fragp->fr_literal + fragp->fr_fix; |
df58fc94 RS |
17266 | nop_opcode = *p; |
17267 | switch (nop_opcode) | |
a19d8eb0 | 17268 | { |
df58fc94 RS |
17269 | case NOP_OPCODE_MICROMIPS: |
17270 | opcode = micromips_nop32_insn.insn_opcode; | |
17271 | size = 4; | |
17272 | break; | |
17273 | case NOP_OPCODE_MIPS16: | |
c67a084a NC |
17274 | opcode = mips16_nop_insn.insn_opcode; |
17275 | size = 2; | |
df58fc94 RS |
17276 | break; |
17277 | case NOP_OPCODE_MIPS: | |
17278 | default: | |
c67a084a NC |
17279 | opcode = nop_insn.insn_opcode; |
17280 | size = 4; | |
df58fc94 | 17281 | break; |
c67a084a | 17282 | } |
a19d8eb0 | 17283 | |
c67a084a NC |
17284 | bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix; |
17285 | excess = bytes % size; | |
df58fc94 RS |
17286 | |
17287 | /* Handle the leading part if we're not inserting a whole number of | |
17288 | instructions, and make it the end of the fixed part of the frag. | |
17289 | Try to fit in a short microMIPS NOP if applicable and possible, | |
17290 | and use zeroes otherwise. */ | |
17291 | gas_assert (excess < 4); | |
17292 | fragp->fr_fix += excess; | |
17293 | switch (excess) | |
c67a084a | 17294 | { |
df58fc94 RS |
17295 | case 3: |
17296 | *p++ = '\0'; | |
17297 | /* Fall through. */ | |
17298 | case 2: | |
833794fc | 17299 | if (nop_opcode == NOP_OPCODE_MICROMIPS && !mips_opts.insn32) |
df58fc94 | 17300 | { |
4d68580a | 17301 | p = write_compressed_insn (p, micromips_nop16_insn.insn_opcode, 2); |
df58fc94 RS |
17302 | break; |
17303 | } | |
17304 | *p++ = '\0'; | |
17305 | /* Fall through. */ | |
17306 | case 1: | |
17307 | *p++ = '\0'; | |
17308 | /* Fall through. */ | |
17309 | case 0: | |
17310 | break; | |
a19d8eb0 | 17311 | } |
c67a084a NC |
17312 | |
17313 | md_number_to_chars (p, opcode, size); | |
17314 | fragp->fr_var = size; | |
a19d8eb0 CP |
17315 | } |
17316 | ||
252b5132 | 17317 | static void |
17a2f251 | 17318 | md_obj_begin (void) |
252b5132 RH |
17319 | { |
17320 | } | |
17321 | ||
17322 | static void | |
17a2f251 | 17323 | md_obj_end (void) |
252b5132 | 17324 | { |
54f4ddb3 | 17325 | /* Check for premature end, nesting errors, etc. */ |
252b5132 | 17326 | if (cur_proc_ptr) |
9a41af64 | 17327 | as_warn (_("missing .end at end of assembly")); |
252b5132 RH |
17328 | } |
17329 | ||
17330 | static long | |
17a2f251 | 17331 | get_number (void) |
252b5132 RH |
17332 | { |
17333 | int negative = 0; | |
17334 | long val = 0; | |
17335 | ||
17336 | if (*input_line_pointer == '-') | |
17337 | { | |
17338 | ++input_line_pointer; | |
17339 | negative = 1; | |
17340 | } | |
3882b010 | 17341 | if (!ISDIGIT (*input_line_pointer)) |
956cd1d6 | 17342 | as_bad (_("expected simple number")); |
252b5132 RH |
17343 | if (input_line_pointer[0] == '0') |
17344 | { | |
17345 | if (input_line_pointer[1] == 'x') | |
17346 | { | |
17347 | input_line_pointer += 2; | |
3882b010 | 17348 | while (ISXDIGIT (*input_line_pointer)) |
252b5132 RH |
17349 | { |
17350 | val <<= 4; | |
17351 | val |= hex_value (*input_line_pointer++); | |
17352 | } | |
17353 | return negative ? -val : val; | |
17354 | } | |
17355 | else | |
17356 | { | |
17357 | ++input_line_pointer; | |
3882b010 | 17358 | while (ISDIGIT (*input_line_pointer)) |
252b5132 RH |
17359 | { |
17360 | val <<= 3; | |
17361 | val |= *input_line_pointer++ - '0'; | |
17362 | } | |
17363 | return negative ? -val : val; | |
17364 | } | |
17365 | } | |
3882b010 | 17366 | if (!ISDIGIT (*input_line_pointer)) |
252b5132 RH |
17367 | { |
17368 | printf (_(" *input_line_pointer == '%c' 0x%02x\n"), | |
17369 | *input_line_pointer, *input_line_pointer); | |
956cd1d6 | 17370 | as_warn (_("invalid number")); |
252b5132 RH |
17371 | return -1; |
17372 | } | |
3882b010 | 17373 | while (ISDIGIT (*input_line_pointer)) |
252b5132 RH |
17374 | { |
17375 | val *= 10; | |
17376 | val += *input_line_pointer++ - '0'; | |
17377 | } | |
17378 | return negative ? -val : val; | |
17379 | } | |
17380 | ||
17381 | /* The .file directive; just like the usual .file directive, but there | |
c5dd6aab DJ |
17382 | is an initial number which is the ECOFF file index. In the non-ECOFF |
17383 | case .file implies DWARF-2. */ | |
17384 | ||
17385 | static void | |
17a2f251 | 17386 | s_mips_file (int x ATTRIBUTE_UNUSED) |
c5dd6aab | 17387 | { |
ecb4347a DJ |
17388 | static int first_file_directive = 0; |
17389 | ||
c5dd6aab DJ |
17390 | if (ECOFF_DEBUGGING) |
17391 | { | |
17392 | get_number (); | |
17393 | s_app_file (0); | |
17394 | } | |
17395 | else | |
ecb4347a DJ |
17396 | { |
17397 | char *filename; | |
17398 | ||
17399 | filename = dwarf2_directive_file (0); | |
17400 | ||
17401 | /* Versions of GCC up to 3.1 start files with a ".file" | |
17402 | directive even for stabs output. Make sure that this | |
17403 | ".file" is handled. Note that you need a version of GCC | |
17404 | after 3.1 in order to support DWARF-2 on MIPS. */ | |
17405 | if (filename != NULL && ! first_file_directive) | |
17406 | { | |
17407 | (void) new_logical_line (filename, -1); | |
c04f5787 | 17408 | s_app_file_string (filename, 0); |
ecb4347a DJ |
17409 | } |
17410 | first_file_directive = 1; | |
17411 | } | |
c5dd6aab DJ |
17412 | } |
17413 | ||
17414 | /* The .loc directive, implying DWARF-2. */ | |
252b5132 RH |
17415 | |
17416 | static void | |
17a2f251 | 17417 | s_mips_loc (int x ATTRIBUTE_UNUSED) |
252b5132 | 17418 | { |
c5dd6aab DJ |
17419 | if (!ECOFF_DEBUGGING) |
17420 | dwarf2_directive_loc (0); | |
252b5132 RH |
17421 | } |
17422 | ||
252b5132 RH |
17423 | /* The .end directive. */ |
17424 | ||
17425 | static void | |
17a2f251 | 17426 | s_mips_end (int x ATTRIBUTE_UNUSED) |
252b5132 RH |
17427 | { |
17428 | symbolS *p; | |
252b5132 | 17429 | |
7a621144 DJ |
17430 | /* Following functions need their own .frame and .cprestore directives. */ |
17431 | mips_frame_reg_valid = 0; | |
17432 | mips_cprestore_valid = 0; | |
17433 | ||
252b5132 RH |
17434 | if (!is_end_of_line[(unsigned char) *input_line_pointer]) |
17435 | { | |
17436 | p = get_symbol (); | |
17437 | demand_empty_rest_of_line (); | |
17438 | } | |
17439 | else | |
17440 | p = NULL; | |
17441 | ||
14949570 | 17442 | if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) == 0) |
252b5132 RH |
17443 | as_warn (_(".end not in text section")); |
17444 | ||
17445 | if (!cur_proc_ptr) | |
17446 | { | |
1661c76c | 17447 | as_warn (_(".end directive without a preceding .ent directive")); |
252b5132 RH |
17448 | demand_empty_rest_of_line (); |
17449 | return; | |
17450 | } | |
17451 | ||
17452 | if (p != NULL) | |
17453 | { | |
9c2799c2 | 17454 | gas_assert (S_GET_NAME (p)); |
9b2f1d35 | 17455 | if (strcmp (S_GET_NAME (p), S_GET_NAME (cur_proc_ptr->func_sym))) |
1661c76c | 17456 | as_warn (_(".end symbol does not match .ent symbol")); |
ecb4347a DJ |
17457 | |
17458 | if (debug_type == DEBUG_STABS) | |
17459 | stabs_generate_asm_endfunc (S_GET_NAME (p), | |
17460 | S_GET_NAME (p)); | |
252b5132 RH |
17461 | } |
17462 | else | |
17463 | as_warn (_(".end directive missing or unknown symbol")); | |
17464 | ||
9b2f1d35 EC |
17465 | /* Create an expression to calculate the size of the function. */ |
17466 | if (p && cur_proc_ptr) | |
17467 | { | |
17468 | OBJ_SYMFIELD_TYPE *obj = symbol_get_obj (p); | |
17469 | expressionS *exp = xmalloc (sizeof (expressionS)); | |
17470 | ||
17471 | obj->size = exp; | |
17472 | exp->X_op = O_subtract; | |
17473 | exp->X_add_symbol = symbol_temp_new_now (); | |
17474 | exp->X_op_symbol = p; | |
17475 | exp->X_add_number = 0; | |
17476 | ||
17477 | cur_proc_ptr->func_end_sym = exp->X_add_symbol; | |
17478 | } | |
17479 | ||
ecb4347a | 17480 | /* Generate a .pdr section. */ |
f3ded42a | 17481 | if (!ECOFF_DEBUGGING && mips_flag_pdr) |
ecb4347a DJ |
17482 | { |
17483 | segT saved_seg = now_seg; | |
17484 | subsegT saved_subseg = now_subseg; | |
ecb4347a DJ |
17485 | expressionS exp; |
17486 | char *fragp; | |
252b5132 | 17487 | |
252b5132 | 17488 | #ifdef md_flush_pending_output |
ecb4347a | 17489 | md_flush_pending_output (); |
252b5132 RH |
17490 | #endif |
17491 | ||
9c2799c2 | 17492 | gas_assert (pdr_seg); |
ecb4347a | 17493 | subseg_set (pdr_seg, 0); |
252b5132 | 17494 | |
ecb4347a DJ |
17495 | /* Write the symbol. */ |
17496 | exp.X_op = O_symbol; | |
17497 | exp.X_add_symbol = p; | |
17498 | exp.X_add_number = 0; | |
17499 | emit_expr (&exp, 4); | |
252b5132 | 17500 | |
ecb4347a | 17501 | fragp = frag_more (7 * 4); |
252b5132 | 17502 | |
17a2f251 TS |
17503 | md_number_to_chars (fragp, cur_proc_ptr->reg_mask, 4); |
17504 | md_number_to_chars (fragp + 4, cur_proc_ptr->reg_offset, 4); | |
17505 | md_number_to_chars (fragp + 8, cur_proc_ptr->fpreg_mask, 4); | |
17506 | md_number_to_chars (fragp + 12, cur_proc_ptr->fpreg_offset, 4); | |
17507 | md_number_to_chars (fragp + 16, cur_proc_ptr->frame_offset, 4); | |
17508 | md_number_to_chars (fragp + 20, cur_proc_ptr->frame_reg, 4); | |
17509 | md_number_to_chars (fragp + 24, cur_proc_ptr->pc_reg, 4); | |
252b5132 | 17510 | |
ecb4347a DJ |
17511 | subseg_set (saved_seg, saved_subseg); |
17512 | } | |
252b5132 RH |
17513 | |
17514 | cur_proc_ptr = NULL; | |
17515 | } | |
17516 | ||
17517 | /* The .aent and .ent directives. */ | |
17518 | ||
17519 | static void | |
17a2f251 | 17520 | s_mips_ent (int aent) |
252b5132 | 17521 | { |
252b5132 | 17522 | symbolS *symbolP; |
252b5132 RH |
17523 | |
17524 | symbolP = get_symbol (); | |
17525 | if (*input_line_pointer == ',') | |
f9419b05 | 17526 | ++input_line_pointer; |
252b5132 | 17527 | SKIP_WHITESPACE (); |
3882b010 | 17528 | if (ISDIGIT (*input_line_pointer) |
d9a62219 | 17529 | || *input_line_pointer == '-') |
874e8986 | 17530 | get_number (); |
252b5132 | 17531 | |
14949570 | 17532 | if ((bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) == 0) |
1661c76c | 17533 | as_warn (_(".ent or .aent not in text section")); |
252b5132 RH |
17534 | |
17535 | if (!aent && cur_proc_ptr) | |
9a41af64 | 17536 | as_warn (_("missing .end")); |
252b5132 RH |
17537 | |
17538 | if (!aent) | |
17539 | { | |
7a621144 DJ |
17540 | /* This function needs its own .frame and .cprestore directives. */ |
17541 | mips_frame_reg_valid = 0; | |
17542 | mips_cprestore_valid = 0; | |
17543 | ||
252b5132 RH |
17544 | cur_proc_ptr = &cur_proc; |
17545 | memset (cur_proc_ptr, '\0', sizeof (procS)); | |
17546 | ||
9b2f1d35 | 17547 | cur_proc_ptr->func_sym = symbolP; |
252b5132 | 17548 | |
f9419b05 | 17549 | ++numprocs; |
ecb4347a DJ |
17550 | |
17551 | if (debug_type == DEBUG_STABS) | |
17552 | stabs_generate_asm_func (S_GET_NAME (symbolP), | |
17553 | S_GET_NAME (symbolP)); | |
252b5132 RH |
17554 | } |
17555 | ||
7c0fc524 MR |
17556 | symbol_get_bfdsym (symbolP)->flags |= BSF_FUNCTION; |
17557 | ||
252b5132 RH |
17558 | demand_empty_rest_of_line (); |
17559 | } | |
17560 | ||
17561 | /* The .frame directive. If the mdebug section is present (IRIX 5 native) | |
bdaaa2e1 | 17562 | then ecoff.c (ecoff_directive_frame) is used. For embedded targets, |
252b5132 | 17563 | s_mips_frame is used so that we can set the PDR information correctly. |
bdaaa2e1 | 17564 | We can't use the ecoff routines because they make reference to the ecoff |
252b5132 RH |
17565 | symbol table (in the mdebug section). */ |
17566 | ||
17567 | static void | |
17a2f251 | 17568 | s_mips_frame (int ignore ATTRIBUTE_UNUSED) |
252b5132 | 17569 | { |
f3ded42a RS |
17570 | if (ECOFF_DEBUGGING) |
17571 | s_ignore (ignore); | |
17572 | else | |
ecb4347a DJ |
17573 | { |
17574 | long val; | |
252b5132 | 17575 | |
ecb4347a DJ |
17576 | if (cur_proc_ptr == (procS *) NULL) |
17577 | { | |
17578 | as_warn (_(".frame outside of .ent")); | |
17579 | demand_empty_rest_of_line (); | |
17580 | return; | |
17581 | } | |
252b5132 | 17582 | |
ecb4347a DJ |
17583 | cur_proc_ptr->frame_reg = tc_get_register (1); |
17584 | ||
17585 | SKIP_WHITESPACE (); | |
17586 | if (*input_line_pointer++ != ',' | |
17587 | || get_absolute_expression_and_terminator (&val) != ',') | |
17588 | { | |
1661c76c | 17589 | as_warn (_("bad .frame directive")); |
ecb4347a DJ |
17590 | --input_line_pointer; |
17591 | demand_empty_rest_of_line (); | |
17592 | return; | |
17593 | } | |
252b5132 | 17594 | |
ecb4347a DJ |
17595 | cur_proc_ptr->frame_offset = val; |
17596 | cur_proc_ptr->pc_reg = tc_get_register (0); | |
252b5132 | 17597 | |
252b5132 | 17598 | demand_empty_rest_of_line (); |
252b5132 | 17599 | } |
252b5132 RH |
17600 | } |
17601 | ||
bdaaa2e1 KH |
17602 | /* The .fmask and .mask directives. If the mdebug section is present |
17603 | (IRIX 5 native) then ecoff.c (ecoff_directive_mask) is used. For | |
252b5132 | 17604 | embedded targets, s_mips_mask is used so that we can set the PDR |
bdaaa2e1 | 17605 | information correctly. We can't use the ecoff routines because they |
252b5132 RH |
17606 | make reference to the ecoff symbol table (in the mdebug section). */ |
17607 | ||
17608 | static void | |
17a2f251 | 17609 | s_mips_mask (int reg_type) |
252b5132 | 17610 | { |
f3ded42a RS |
17611 | if (ECOFF_DEBUGGING) |
17612 | s_ignore (reg_type); | |
17613 | else | |
252b5132 | 17614 | { |
ecb4347a | 17615 | long mask, off; |
252b5132 | 17616 | |
ecb4347a DJ |
17617 | if (cur_proc_ptr == (procS *) NULL) |
17618 | { | |
17619 | as_warn (_(".mask/.fmask outside of .ent")); | |
17620 | demand_empty_rest_of_line (); | |
17621 | return; | |
17622 | } | |
252b5132 | 17623 | |
ecb4347a DJ |
17624 | if (get_absolute_expression_and_terminator (&mask) != ',') |
17625 | { | |
1661c76c | 17626 | as_warn (_("bad .mask/.fmask directive")); |
ecb4347a DJ |
17627 | --input_line_pointer; |
17628 | demand_empty_rest_of_line (); | |
17629 | return; | |
17630 | } | |
252b5132 | 17631 | |
ecb4347a DJ |
17632 | off = get_absolute_expression (); |
17633 | ||
17634 | if (reg_type == 'F') | |
17635 | { | |
17636 | cur_proc_ptr->fpreg_mask = mask; | |
17637 | cur_proc_ptr->fpreg_offset = off; | |
17638 | } | |
17639 | else | |
17640 | { | |
17641 | cur_proc_ptr->reg_mask = mask; | |
17642 | cur_proc_ptr->reg_offset = off; | |
17643 | } | |
17644 | ||
17645 | demand_empty_rest_of_line (); | |
252b5132 | 17646 | } |
252b5132 RH |
17647 | } |
17648 | ||
316f5878 RS |
17649 | /* A table describing all the processors gas knows about. Names are |
17650 | matched in the order listed. | |
e7af610e | 17651 | |
316f5878 RS |
17652 | To ease comparison, please keep this table in the same order as |
17653 | gcc's mips_cpu_info_table[]. */ | |
e972090a NC |
17654 | static const struct mips_cpu_info mips_cpu_info_table[] = |
17655 | { | |
316f5878 | 17656 | /* Entries for generic ISAs */ |
d16afab6 RS |
17657 | { "mips1", MIPS_CPU_IS_ISA, 0, ISA_MIPS1, CPU_R3000 }, |
17658 | { "mips2", MIPS_CPU_IS_ISA, 0, ISA_MIPS2, CPU_R6000 }, | |
17659 | { "mips3", MIPS_CPU_IS_ISA, 0, ISA_MIPS3, CPU_R4000 }, | |
17660 | { "mips4", MIPS_CPU_IS_ISA, 0, ISA_MIPS4, CPU_R8000 }, | |
17661 | { "mips5", MIPS_CPU_IS_ISA, 0, ISA_MIPS5, CPU_MIPS5 }, | |
17662 | { "mips32", MIPS_CPU_IS_ISA, 0, ISA_MIPS32, CPU_MIPS32 }, | |
17663 | { "mips32r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17664 | { "mips64", MIPS_CPU_IS_ISA, 0, ISA_MIPS64, CPU_MIPS64 }, | |
17665 | { "mips64r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R2, CPU_MIPS64R2 }, | |
316f5878 RS |
17666 | |
17667 | /* MIPS I */ | |
d16afab6 RS |
17668 | { "r3000", 0, 0, ISA_MIPS1, CPU_R3000 }, |
17669 | { "r2000", 0, 0, ISA_MIPS1, CPU_R3000 }, | |
17670 | { "r3900", 0, 0, ISA_MIPS1, CPU_R3900 }, | |
316f5878 RS |
17671 | |
17672 | /* MIPS II */ | |
d16afab6 | 17673 | { "r6000", 0, 0, ISA_MIPS2, CPU_R6000 }, |
316f5878 RS |
17674 | |
17675 | /* MIPS III */ | |
d16afab6 RS |
17676 | { "r4000", 0, 0, ISA_MIPS3, CPU_R4000 }, |
17677 | { "r4010", 0, 0, ISA_MIPS2, CPU_R4010 }, | |
17678 | { "vr4100", 0, 0, ISA_MIPS3, CPU_VR4100 }, | |
17679 | { "vr4111", 0, 0, ISA_MIPS3, CPU_R4111 }, | |
17680 | { "vr4120", 0, 0, ISA_MIPS3, CPU_VR4120 }, | |
17681 | { "vr4130", 0, 0, ISA_MIPS3, CPU_VR4120 }, | |
17682 | { "vr4181", 0, 0, ISA_MIPS3, CPU_R4111 }, | |
17683 | { "vr4300", 0, 0, ISA_MIPS3, CPU_R4300 }, | |
17684 | { "r4400", 0, 0, ISA_MIPS3, CPU_R4400 }, | |
17685 | { "r4600", 0, 0, ISA_MIPS3, CPU_R4600 }, | |
17686 | { "orion", 0, 0, ISA_MIPS3, CPU_R4600 }, | |
17687 | { "r4650", 0, 0, ISA_MIPS3, CPU_R4650 }, | |
17688 | { "r5900", 0, 0, ISA_MIPS3, CPU_R5900 }, | |
b15591bb | 17689 | /* ST Microelectronics Loongson 2E and 2F cores */ |
d16afab6 RS |
17690 | { "loongson2e", 0, 0, ISA_MIPS3, CPU_LOONGSON_2E }, |
17691 | { "loongson2f", 0, 0, ISA_MIPS3, CPU_LOONGSON_2F }, | |
316f5878 RS |
17692 | |
17693 | /* MIPS IV */ | |
d16afab6 RS |
17694 | { "r8000", 0, 0, ISA_MIPS4, CPU_R8000 }, |
17695 | { "r10000", 0, 0, ISA_MIPS4, CPU_R10000 }, | |
17696 | { "r12000", 0, 0, ISA_MIPS4, CPU_R12000 }, | |
17697 | { "r14000", 0, 0, ISA_MIPS4, CPU_R14000 }, | |
17698 | { "r16000", 0, 0, ISA_MIPS4, CPU_R16000 }, | |
17699 | { "vr5000", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17700 | { "vr5400", 0, 0, ISA_MIPS4, CPU_VR5400 }, | |
17701 | { "vr5500", 0, 0, ISA_MIPS4, CPU_VR5500 }, | |
17702 | { "rm5200", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17703 | { "rm5230", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17704 | { "rm5231", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17705 | { "rm5261", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17706 | { "rm5721", 0, 0, ISA_MIPS4, CPU_R5000 }, | |
17707 | { "rm7000", 0, 0, ISA_MIPS4, CPU_RM7000 }, | |
17708 | { "rm9000", 0, 0, ISA_MIPS4, CPU_RM9000 }, | |
316f5878 RS |
17709 | |
17710 | /* MIPS 32 */ | |
d16afab6 RS |
17711 | { "4kc", 0, 0, ISA_MIPS32, CPU_MIPS32 }, |
17712 | { "4km", 0, 0, ISA_MIPS32, CPU_MIPS32 }, | |
17713 | { "4kp", 0, 0, ISA_MIPS32, CPU_MIPS32 }, | |
17714 | { "4ksc", 0, ASE_SMARTMIPS, ISA_MIPS32, CPU_MIPS32 }, | |
ad3fea08 TS |
17715 | |
17716 | /* MIPS 32 Release 2 */ | |
d16afab6 RS |
17717 | { "4kec", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17718 | { "4kem", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17719 | { "4kep", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17720 | { "4ksd", 0, ASE_SMARTMIPS, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17721 | { "m4k", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17722 | { "m4kp", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17723 | { "m14k", 0, ASE_MCU, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17724 | { "m14kc", 0, ASE_MCU, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17725 | { "m14ke", 0, ASE_DSP | ASE_DSPR2 | ASE_MCU, | |
17726 | ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17727 | { "m14kec", 0, ASE_DSP | ASE_DSPR2 | ASE_MCU, | |
17728 | ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17729 | { "24kc", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17730 | { "24kf2_1", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17731 | { "24kf", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17732 | { "24kf1_1", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
0fdf1951 | 17733 | /* Deprecated forms of the above. */ |
d16afab6 RS |
17734 | { "24kfx", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17735 | { "24kx", 0, 0, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
01fd108f | 17736 | /* 24KE is a 24K with DSP ASE, other ASEs are optional. */ |
d16afab6 RS |
17737 | { "24kec", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17738 | { "24kef2_1", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17739 | { "24kef", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17740 | { "24kef1_1", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
0fdf1951 | 17741 | /* Deprecated forms of the above. */ |
d16afab6 RS |
17742 | { "24kefx", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17743 | { "24kex", 0, ASE_DSP, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
01fd108f | 17744 | /* 34K is a 24K with DSP and MT ASE, other ASEs are optional. */ |
d16afab6 RS |
17745 | { "34kc", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17746 | { "34kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17747 | { "34kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17748 | { "34kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
0fdf1951 | 17749 | /* Deprecated forms of the above. */ |
d16afab6 RS |
17750 | { "34kfx", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17751 | { "34kx", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
711eefe4 | 17752 | /* 34Kn is a 34kc without DSP. */ |
d16afab6 | 17753 | { "34kn", 0, ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, |
01fd108f | 17754 | /* 74K with DSP and DSPR2 ASE, other ASEs are optional. */ |
d16afab6 RS |
17755 | { "74kc", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17756 | { "74kf2_1", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17757 | { "74kf", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17758 | { "74kf1_1", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17759 | { "74kf3_2", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
0fdf1951 | 17760 | /* Deprecated forms of the above. */ |
d16afab6 RS |
17761 | { "74kfx", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17762 | { "74kx", 0, ASE_DSP | ASE_DSPR2, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
30f8113a | 17763 | /* 1004K cores are multiprocessor versions of the 34K. */ |
d16afab6 RS |
17764 | { "1004kc", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, |
17765 | { "1004kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17766 | { "1004kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
17767 | { "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 }, | |
32b26a03 | 17768 | |
316f5878 | 17769 | /* MIPS 64 */ |
d16afab6 RS |
17770 | { "5kc", 0, 0, ISA_MIPS64, CPU_MIPS64 }, |
17771 | { "5kf", 0, 0, ISA_MIPS64, CPU_MIPS64 }, | |
17772 | { "20kc", 0, ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 }, | |
17773 | { "25kf", 0, ASE_MIPS3D, ISA_MIPS64, CPU_MIPS64 }, | |
ad3fea08 | 17774 | |
c7a23324 | 17775 | /* Broadcom SB-1 CPU core */ |
d16afab6 | 17776 | { "sb1", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 }, |
1e85aad8 | 17777 | /* Broadcom SB-1A CPU core */ |
d16afab6 | 17778 | { "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 }, |
d051516a | 17779 | |
d16afab6 | 17780 | { "loongson3a", 0, 0, ISA_MIPS64, CPU_LOONGSON_3A }, |
e7af610e | 17781 | |
ed163775 MR |
17782 | /* MIPS 64 Release 2 */ |
17783 | ||
967344c6 | 17784 | /* Cavium Networks Octeon CPU core */ |
d16afab6 RS |
17785 | { "octeon", 0, 0, ISA_MIPS64R2, CPU_OCTEON }, |
17786 | { "octeon+", 0, 0, ISA_MIPS64R2, CPU_OCTEONP }, | |
17787 | { "octeon2", 0, 0, ISA_MIPS64R2, CPU_OCTEON2 }, | |
967344c6 | 17788 | |
52b6b6b9 | 17789 | /* RMI Xlr */ |
d16afab6 | 17790 | { "xlr", 0, 0, ISA_MIPS64, CPU_XLR }, |
52b6b6b9 | 17791 | |
55a36193 MK |
17792 | /* Broadcom XLP. |
17793 | XLP is mostly like XLR, with the prominent exception that it is | |
17794 | MIPS64R2 rather than MIPS64. */ | |
d16afab6 | 17795 | { "xlp", 0, 0, ISA_MIPS64R2, CPU_XLR }, |
55a36193 | 17796 | |
316f5878 | 17797 | /* End marker */ |
d16afab6 | 17798 | { NULL, 0, 0, 0, 0 } |
316f5878 | 17799 | }; |
e7af610e | 17800 | |
84ea6cf2 | 17801 | |
316f5878 RS |
17802 | /* Return true if GIVEN is the same as CANONICAL, or if it is CANONICAL |
17803 | with a final "000" replaced by "k". Ignore case. | |
e7af610e | 17804 | |
316f5878 | 17805 | Note: this function is shared between GCC and GAS. */ |
c6c98b38 | 17806 | |
b34976b6 | 17807 | static bfd_boolean |
17a2f251 | 17808 | mips_strict_matching_cpu_name_p (const char *canonical, const char *given) |
316f5878 RS |
17809 | { |
17810 | while (*given != 0 && TOLOWER (*given) == TOLOWER (*canonical)) | |
17811 | given++, canonical++; | |
17812 | ||
17813 | return ((*given == 0 && *canonical == 0) | |
17814 | || (strcmp (canonical, "000") == 0 && strcasecmp (given, "k") == 0)); | |
17815 | } | |
17816 | ||
17817 | ||
17818 | /* Return true if GIVEN matches CANONICAL, where GIVEN is a user-supplied | |
17819 | CPU name. We've traditionally allowed a lot of variation here. | |
17820 | ||
17821 | Note: this function is shared between GCC and GAS. */ | |
17822 | ||
b34976b6 | 17823 | static bfd_boolean |
17a2f251 | 17824 | mips_matching_cpu_name_p (const char *canonical, const char *given) |
316f5878 RS |
17825 | { |
17826 | /* First see if the name matches exactly, or with a final "000" | |
17827 | turned into "k". */ | |
17828 | if (mips_strict_matching_cpu_name_p (canonical, given)) | |
b34976b6 | 17829 | return TRUE; |
316f5878 RS |
17830 | |
17831 | /* If not, try comparing based on numerical designation alone. | |
17832 | See if GIVEN is an unadorned number, or 'r' followed by a number. */ | |
17833 | if (TOLOWER (*given) == 'r') | |
17834 | given++; | |
17835 | if (!ISDIGIT (*given)) | |
b34976b6 | 17836 | return FALSE; |
316f5878 RS |
17837 | |
17838 | /* Skip over some well-known prefixes in the canonical name, | |
17839 | hoping to find a number there too. */ | |
17840 | if (TOLOWER (canonical[0]) == 'v' && TOLOWER (canonical[1]) == 'r') | |
17841 | canonical += 2; | |
17842 | else if (TOLOWER (canonical[0]) == 'r' && TOLOWER (canonical[1]) == 'm') | |
17843 | canonical += 2; | |
17844 | else if (TOLOWER (canonical[0]) == 'r') | |
17845 | canonical += 1; | |
17846 | ||
17847 | return mips_strict_matching_cpu_name_p (canonical, given); | |
17848 | } | |
17849 | ||
17850 | ||
17851 | /* Parse an option that takes the name of a processor as its argument. | |
17852 | OPTION is the name of the option and CPU_STRING is the argument. | |
17853 | Return the corresponding processor enumeration if the CPU_STRING is | |
17854 | recognized, otherwise report an error and return null. | |
17855 | ||
17856 | A similar function exists in GCC. */ | |
e7af610e NC |
17857 | |
17858 | static const struct mips_cpu_info * | |
17a2f251 | 17859 | mips_parse_cpu (const char *option, const char *cpu_string) |
e7af610e | 17860 | { |
316f5878 | 17861 | const struct mips_cpu_info *p; |
e7af610e | 17862 | |
316f5878 RS |
17863 | /* 'from-abi' selects the most compatible architecture for the given |
17864 | ABI: MIPS I for 32-bit ABIs and MIPS III for 64-bit ABIs. For the | |
17865 | EABIs, we have to decide whether we're using the 32-bit or 64-bit | |
17866 | version. Look first at the -mgp options, if given, otherwise base | |
17867 | the choice on MIPS_DEFAULT_64BIT. | |
e7af610e | 17868 | |
316f5878 RS |
17869 | Treat NO_ABI like the EABIs. One reason to do this is that the |
17870 | plain 'mips' and 'mips64' configs have 'from-abi' as their default | |
17871 | architecture. This code picks MIPS I for 'mips' and MIPS III for | |
17872 | 'mips64', just as we did in the days before 'from-abi'. */ | |
17873 | if (strcasecmp (cpu_string, "from-abi") == 0) | |
17874 | { | |
17875 | if (ABI_NEEDS_32BIT_REGS (mips_abi)) | |
17876 | return mips_cpu_info_from_isa (ISA_MIPS1); | |
17877 | ||
17878 | if (ABI_NEEDS_64BIT_REGS (mips_abi)) | |
17879 | return mips_cpu_info_from_isa (ISA_MIPS3); | |
17880 | ||
17881 | if (file_mips_gp32 >= 0) | |
17882 | return mips_cpu_info_from_isa (file_mips_gp32 ? ISA_MIPS1 : ISA_MIPS3); | |
17883 | ||
17884 | return mips_cpu_info_from_isa (MIPS_DEFAULT_64BIT | |
17885 | ? ISA_MIPS3 | |
17886 | : ISA_MIPS1); | |
17887 | } | |
17888 | ||
17889 | /* 'default' has traditionally been a no-op. Probably not very useful. */ | |
17890 | if (strcasecmp (cpu_string, "default") == 0) | |
17891 | return 0; | |
17892 | ||
17893 | for (p = mips_cpu_info_table; p->name != 0; p++) | |
17894 | if (mips_matching_cpu_name_p (p->name, cpu_string)) | |
17895 | return p; | |
17896 | ||
1661c76c | 17897 | as_bad (_("bad value (%s) for %s"), cpu_string, option); |
316f5878 | 17898 | return 0; |
e7af610e NC |
17899 | } |
17900 | ||
316f5878 RS |
17901 | /* Return the canonical processor information for ISA (a member of the |
17902 | ISA_MIPS* enumeration). */ | |
17903 | ||
e7af610e | 17904 | static const struct mips_cpu_info * |
17a2f251 | 17905 | mips_cpu_info_from_isa (int isa) |
e7af610e NC |
17906 | { |
17907 | int i; | |
17908 | ||
17909 | for (i = 0; mips_cpu_info_table[i].name != NULL; i++) | |
ad3fea08 | 17910 | if ((mips_cpu_info_table[i].flags & MIPS_CPU_IS_ISA) |
316f5878 | 17911 | && isa == mips_cpu_info_table[i].isa) |
e7af610e NC |
17912 | return (&mips_cpu_info_table[i]); |
17913 | ||
e972090a | 17914 | return NULL; |
e7af610e | 17915 | } |
fef14a42 TS |
17916 | |
17917 | static const struct mips_cpu_info * | |
17a2f251 | 17918 | mips_cpu_info_from_arch (int arch) |
fef14a42 TS |
17919 | { |
17920 | int i; | |
17921 | ||
17922 | for (i = 0; mips_cpu_info_table[i].name != NULL; i++) | |
17923 | if (arch == mips_cpu_info_table[i].cpu) | |
17924 | return (&mips_cpu_info_table[i]); | |
17925 | ||
17926 | return NULL; | |
17927 | } | |
316f5878 RS |
17928 | \f |
17929 | static void | |
17a2f251 | 17930 | show (FILE *stream, const char *string, int *col_p, int *first_p) |
316f5878 RS |
17931 | { |
17932 | if (*first_p) | |
17933 | { | |
17934 | fprintf (stream, "%24s", ""); | |
17935 | *col_p = 24; | |
17936 | } | |
17937 | else | |
17938 | { | |
17939 | fprintf (stream, ", "); | |
17940 | *col_p += 2; | |
17941 | } | |
e7af610e | 17942 | |
316f5878 RS |
17943 | if (*col_p + strlen (string) > 72) |
17944 | { | |
17945 | fprintf (stream, "\n%24s", ""); | |
17946 | *col_p = 24; | |
17947 | } | |
17948 | ||
17949 | fprintf (stream, "%s", string); | |
17950 | *col_p += strlen (string); | |
17951 | ||
17952 | *first_p = 0; | |
17953 | } | |
17954 | ||
17955 | void | |
17a2f251 | 17956 | md_show_usage (FILE *stream) |
e7af610e | 17957 | { |
316f5878 RS |
17958 | int column, first; |
17959 | size_t i; | |
17960 | ||
17961 | fprintf (stream, _("\ | |
17962 | MIPS options:\n\ | |
316f5878 RS |
17963 | -EB generate big endian output\n\ |
17964 | -EL generate little endian output\n\ | |
17965 | -g, -g2 do not remove unneeded NOPs or swap branches\n\ | |
17966 | -G NUM allow referencing objects up to NUM bytes\n\ | |
17967 | implicitly with the gp register [default 8]\n")); | |
17968 | fprintf (stream, _("\ | |
17969 | -mips1 generate MIPS ISA I instructions\n\ | |
17970 | -mips2 generate MIPS ISA II instructions\n\ | |
17971 | -mips3 generate MIPS ISA III instructions\n\ | |
17972 | -mips4 generate MIPS ISA IV instructions\n\ | |
17973 | -mips5 generate MIPS ISA V instructions\n\ | |
17974 | -mips32 generate MIPS32 ISA instructions\n\ | |
af7ee8bf | 17975 | -mips32r2 generate MIPS32 release 2 ISA instructions\n\ |
316f5878 | 17976 | -mips64 generate MIPS64 ISA instructions\n\ |
5f74bc13 | 17977 | -mips64r2 generate MIPS64 release 2 ISA instructions\n\ |
316f5878 RS |
17978 | -march=CPU/-mtune=CPU generate code/schedule for CPU, where CPU is one of:\n")); |
17979 | ||
17980 | first = 1; | |
e7af610e NC |
17981 | |
17982 | for (i = 0; mips_cpu_info_table[i].name != NULL; i++) | |
316f5878 RS |
17983 | show (stream, mips_cpu_info_table[i].name, &column, &first); |
17984 | show (stream, "from-abi", &column, &first); | |
17985 | fputc ('\n', stream); | |
e7af610e | 17986 | |
316f5878 RS |
17987 | fprintf (stream, _("\ |
17988 | -mCPU equivalent to -march=CPU -mtune=CPU. Deprecated.\n\ | |
17989 | -no-mCPU don't generate code specific to CPU.\n\ | |
17990 | For -mCPU and -no-mCPU, CPU must be one of:\n")); | |
17991 | ||
17992 | first = 1; | |
17993 | ||
17994 | show (stream, "3900", &column, &first); | |
17995 | show (stream, "4010", &column, &first); | |
17996 | show (stream, "4100", &column, &first); | |
17997 | show (stream, "4650", &column, &first); | |
17998 | fputc ('\n', stream); | |
17999 | ||
18000 | fprintf (stream, _("\ | |
18001 | -mips16 generate mips16 instructions\n\ | |
18002 | -no-mips16 do not generate mips16 instructions\n")); | |
18003 | fprintf (stream, _("\ | |
df58fc94 RS |
18004 | -mmicromips generate microMIPS instructions\n\ |
18005 | -mno-micromips do not generate microMIPS instructions\n")); | |
18006 | fprintf (stream, _("\ | |
e16bfa71 TS |
18007 | -msmartmips generate smartmips instructions\n\ |
18008 | -mno-smartmips do not generate smartmips instructions\n")); | |
18009 | fprintf (stream, _("\ | |
74cd071d CF |
18010 | -mdsp generate DSP instructions\n\ |
18011 | -mno-dsp do not generate DSP instructions\n")); | |
18012 | fprintf (stream, _("\ | |
8b082fb1 TS |
18013 | -mdspr2 generate DSP R2 instructions\n\ |
18014 | -mno-dspr2 do not generate DSP R2 instructions\n")); | |
18015 | fprintf (stream, _("\ | |
ef2e4d86 CF |
18016 | -mmt generate MT instructions\n\ |
18017 | -mno-mt do not generate MT instructions\n")); | |
18018 | fprintf (stream, _("\ | |
dec0624d MR |
18019 | -mmcu generate MCU instructions\n\ |
18020 | -mno-mcu do not generate MCU instructions\n")); | |
18021 | fprintf (stream, _("\ | |
b015e599 AP |
18022 | -mvirt generate Virtualization instructions\n\ |
18023 | -mno-virt do not generate Virtualization instructions\n")); | |
18024 | fprintf (stream, _("\ | |
833794fc MR |
18025 | -minsn32 only generate 32-bit microMIPS instructions\n\ |
18026 | -mno-insn32 generate all microMIPS instructions\n")); | |
18027 | fprintf (stream, _("\ | |
c67a084a NC |
18028 | -mfix-loongson2f-jump work around Loongson2F JUMP instructions\n\ |
18029 | -mfix-loongson2f-nop work around Loongson2F NOP errata\n\ | |
d766e8ec | 18030 | -mfix-vr4120 work around certain VR4120 errata\n\ |
7d8e00cf | 18031 | -mfix-vr4130 work around VR4130 mflo/mfhi errata\n\ |
6a32d874 | 18032 | -mfix-24k insert a nop after ERET and DERET instructions\n\ |
d954098f | 18033 | -mfix-cn63xxp1 work around CN63XXP1 PREF errata\n\ |
316f5878 RS |
18034 | -mgp32 use 32-bit GPRs, regardless of the chosen ISA\n\ |
18035 | -mfp32 use 32-bit FPRs, regardless of the chosen ISA\n\ | |
aed1a261 | 18036 | -msym32 assume all symbols have 32-bit values\n\ |
316f5878 RS |
18037 | -O0 remove unneeded NOPs, do not swap branches\n\ |
18038 | -O remove unneeded NOPs and swap branches\n\ | |
316f5878 RS |
18039 | --trap, --no-break trap exception on div by 0 and mult overflow\n\ |
18040 | --break, --no-trap break exception on div by 0 and mult overflow\n")); | |
037b32b9 AN |
18041 | fprintf (stream, _("\ |
18042 | -mhard-float allow floating-point instructions\n\ | |
18043 | -msoft-float do not allow floating-point instructions\n\ | |
18044 | -msingle-float only allow 32-bit floating-point operations\n\ | |
18045 | -mdouble-float allow 32-bit and 64-bit floating-point operations\n\ | |
3bf0dbfb | 18046 | --[no-]construct-floats [dis]allow floating point values to be constructed\n\ |
ba92f887 MR |
18047 | --[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n\ |
18048 | -mnan=ENCODING select an IEEE 754 NaN encoding convention, either of:\n")); | |
18049 | ||
18050 | first = 1; | |
18051 | ||
18052 | show (stream, "legacy", &column, &first); | |
18053 | show (stream, "2008", &column, &first); | |
18054 | ||
18055 | fputc ('\n', stream); | |
18056 | ||
316f5878 RS |
18057 | fprintf (stream, _("\ |
18058 | -KPIC, -call_shared generate SVR4 position independent code\n\ | |
861fb55a | 18059 | -call_nonpic generate non-PIC code that can operate with DSOs\n\ |
0c000745 | 18060 | -mvxworks-pic generate VxWorks position independent code\n\ |
861fb55a | 18061 | -non_shared do not generate code that can operate with DSOs\n\ |
316f5878 | 18062 | -xgot assume a 32 bit GOT\n\ |
dcd410fe | 18063 | -mpdr, -mno-pdr enable/disable creation of .pdr sections\n\ |
bbe506e8 | 18064 | -mshared, -mno-shared disable/enable .cpload optimization for\n\ |
d821e36b | 18065 | position dependent (non shared) code\n\ |
316f5878 RS |
18066 | -mabi=ABI create ABI conformant object file for:\n")); |
18067 | ||
18068 | first = 1; | |
18069 | ||
18070 | show (stream, "32", &column, &first); | |
18071 | show (stream, "o64", &column, &first); | |
18072 | show (stream, "n32", &column, &first); | |
18073 | show (stream, "64", &column, &first); | |
18074 | show (stream, "eabi", &column, &first); | |
18075 | ||
18076 | fputc ('\n', stream); | |
18077 | ||
18078 | fprintf (stream, _("\ | |
18079 | -32 create o32 ABI object file (default)\n\ | |
18080 | -n32 create n32 ABI object file\n\ | |
18081 | -64 create 64 ABI object file\n")); | |
e7af610e | 18082 | } |
14e777e0 | 18083 | |
1575952e | 18084 | #ifdef TE_IRIX |
14e777e0 | 18085 | enum dwarf2_format |
413a266c | 18086 | mips_dwarf2_format (asection *sec ATTRIBUTE_UNUSED) |
14e777e0 | 18087 | { |
369943fe | 18088 | if (HAVE_64BIT_SYMBOLS) |
1575952e | 18089 | return dwarf2_format_64bit_irix; |
14e777e0 KB |
18090 | else |
18091 | return dwarf2_format_32bit; | |
18092 | } | |
1575952e | 18093 | #endif |
73369e65 EC |
18094 | |
18095 | int | |
18096 | mips_dwarf2_addr_size (void) | |
18097 | { | |
6b6b3450 | 18098 | if (HAVE_64BIT_OBJECTS) |
73369e65 | 18099 | return 8; |
73369e65 EC |
18100 | else |
18101 | return 4; | |
18102 | } | |
5862107c EC |
18103 | |
18104 | /* Standard calling conventions leave the CFA at SP on entry. */ | |
18105 | void | |
18106 | mips_cfi_frame_initial_instructions (void) | |
18107 | { | |
18108 | cfi_add_CFA_def_cfa_register (SP); | |
18109 | } | |
18110 | ||
707bfff6 TS |
18111 | int |
18112 | tc_mips_regname_to_dw2regnum (char *regname) | |
18113 | { | |
18114 | unsigned int regnum = -1; | |
18115 | unsigned int reg; | |
18116 | ||
18117 | if (reg_lookup (®name, RTYPE_GP | RTYPE_NUM, ®)) | |
18118 | regnum = reg; | |
18119 | ||
18120 | return regnum; | |
18121 | } |