Commit | Line | Data |
---|---|---|
252b5132 | 1 | \input texinfo @c -*-Texinfo-*- |
f7e42eb4 | 2 | @c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, |
40b36596 | 3 | @c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
252b5132 RH |
4 | @c Free Software Foundation, Inc. |
5 | @c UPDATE!! On future updates-- | |
6 | @c (1) check for new machine-dep cmdline options in | |
7 | @c md_parse_option definitions in config/tc-*.c | |
8 | @c (2) for platform-specific directives, examine md_pseudo_op | |
9 | @c in config/tc-*.c | |
10 | @c (3) for object-format specific directives, examine obj_pseudo_op | |
01642c12 | 11 | @c in config/obj-*.c |
252b5132 RH |
12 | @c (4) portable directives in potable[] in read.c |
13 | @c %**start of header | |
14 | @setfilename as.info | |
15 | @c ---config--- | |
a4fb0134 SC |
16 | @macro gcctabopt{body} |
17 | @code{\body\} | |
18 | @end macro | |
252b5132 RH |
19 | @c defaults, config file may override: |
20 | @set have-stabs | |
21 | @c --- | |
4a4c4a1d MR |
22 | @c man begin NAME |
23 | @c --- | |
252b5132 | 24 | @include asconfig.texi |
c428fa83 | 25 | @include bfdver.texi |
252b5132 | 26 | @c --- |
0285c67d | 27 | @c man end |
4a4c4a1d | 28 | @c --- |
252b5132 | 29 | @c common OR combinations of conditions |
c1253627 NC |
30 | @ifset COFF |
31 | @set COFF-ELF | |
32 | @end ifset | |
33 | @ifset ELF | |
34 | @set COFF-ELF | |
35 | @end ifset | |
252b5132 RH |
36 | @ifset AOUT |
37 | @set aout-bout | |
38 | @end ifset | |
39 | @ifset ARM/Thumb | |
40 | @set ARM | |
41 | @end ifset | |
9982501a JZ |
42 | @ifset Blackfin |
43 | @set Blackfin | |
44 | @end ifset | |
252b5132 RH |
45 | @ifset BOUT |
46 | @set aout-bout | |
47 | @end ifset | |
48 | @ifset H8/300 | |
49 | @set H8 | |
50 | @end ifset | |
252b5132 RH |
51 | @ifset SH |
52 | @set H8 | |
53 | @end ifset | |
54 | @ifset HPPA | |
55 | @set abnormal-separator | |
56 | @end ifset | |
57 | @c ------------ | |
58 | @ifset GENERIC | |
59 | @settitle Using @value{AS} | |
60 | @end ifset | |
61 | @ifclear GENERIC | |
62 | @settitle Using @value{AS} (@value{TARGET}) | |
63 | @end ifclear | |
64 | @setchapternewpage odd | |
65 | @c %**end of header | |
66 | ||
67 | @c @smallbook | |
68 | @c @set SMALL | |
69 | @c WARE! Some of the machine-dependent sections contain tables of machine | |
70 | @c instructions. Except in multi-column format, these tables look silly. | |
71 | @c Unfortunately, Texinfo doesn't have a general-purpose multi-col format, so | |
72 | @c the multi-col format is faked within @example sections. | |
01642c12 | 73 | @c |
252b5132 RH |
74 | @c Again unfortunately, the natural size that fits on a page, for these tables, |
75 | @c is different depending on whether or not smallbook is turned on. | |
76 | @c This matters, because of order: text flow switches columns at each page | |
77 | @c break. | |
01642c12 | 78 | @c |
252b5132 RH |
79 | @c The format faked in this source works reasonably well for smallbook, |
80 | @c not well for the default large-page format. This manual expects that if you | |
81 | @c turn on @smallbook, you will also uncomment the "@set SMALL" to enable the | |
82 | @c tables in question. You can turn on one without the other at your | |
01642c12 | 83 | @c discretion, of course. |
252b5132 RH |
84 | @ifinfo |
85 | @set SMALL | |
86 | @c the insn tables look just as silly in info files regardless of smallbook, | |
87 | @c might as well show 'em anyways. | |
88 | @end ifinfo | |
89 | ||
90 | @ifinfo | |
91 | @format | |
92 | START-INFO-DIR-ENTRY | |
93 | * As: (as). The GNU assembler. | |
59455fb1 | 94 | * Gas: (as). The GNU assembler. |
252b5132 RH |
95 | END-INFO-DIR-ENTRY |
96 | @end format | |
97 | @end ifinfo | |
98 | ||
99 | @finalout | |
100 | @syncodeindex ky cp | |
101 | ||
0e9517a9 | 102 | @copying |
252b5132 RH |
103 | This file documents the GNU Assembler "@value{AS}". |
104 | ||
0285c67d | 105 | @c man begin COPYRIGHT |
9fbcbd81 NC |
106 | Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
107 | 2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. | |
252b5132 | 108 | |
0285c67d | 109 | Permission is granted to copy, distribute and/or modify this document |
793c5807 | 110 | under the terms of the GNU Free Documentation License, Version 1.3 |
0285c67d NC |
111 | or any later version published by the Free Software Foundation; |
112 | with no Invariant Sections, with no Front-Cover Texts, and with no | |
113 | Back-Cover Texts. A copy of the license is included in the | |
c1253627 | 114 | section entitled ``GNU Free Documentation License''. |
0285c67d NC |
115 | |
116 | @c man end | |
0e9517a9 | 117 | @end copying |
252b5132 RH |
118 | |
119 | @titlepage | |
120 | @title Using @value{AS} | |
121 | @subtitle The @sc{gnu} Assembler | |
122 | @ifclear GENERIC | |
123 | @subtitle for the @value{TARGET} family | |
124 | @end ifclear | |
e49e529d JM |
125 | @ifset VERSION_PACKAGE |
126 | @sp 1 | |
127 | @subtitle @value{VERSION_PACKAGE} | |
128 | @end ifset | |
252b5132 RH |
129 | @sp 1 |
130 | @subtitle Version @value{VERSION} | |
131 | @sp 1 | |
132 | @sp 13 | |
b45619c0 | 133 | The Free Software Foundation Inc.@: thanks The Nice Computer |
252b5132 | 134 | Company of Australia for loaning Dean Elsner to write the |
a4fb0134 | 135 | first (Vax) version of @command{as} for Project @sc{gnu}. |
252b5132 RH |
136 | The proprietors, management and staff of TNCCA thank FSF for |
137 | distracting the boss while they got some work | |
138 | done. | |
139 | @sp 3 | |
140 | @author Dean Elsner, Jay Fenlason & friends | |
141 | @page | |
142 | @tex | |
143 | {\parskip=0pt | |
144 | \hfill {\it Using {\tt @value{AS}}}\par | |
145 | \hfill Edited by Cygnus Support\par | |
146 | } | |
147 | %"boxit" macro for figures: | |
148 | %Modified from Knuth's ``boxit'' macro from TeXbook (answer to exercise 21.3) | |
149 | \gdef\boxit#1#2{\vbox{\hrule\hbox{\vrule\kern3pt | |
150 | \vbox{\parindent=0pt\parskip=0pt\hsize=#1\kern3pt\strut\hfil | |
151 | #2\hfil\strut\kern3pt}\kern3pt\vrule}\hrule}}%box with visible outline | |
152 | \gdef\ibox#1#2{\hbox to #1{#2\hfil}\kern8pt}% invisible box | |
153 | @end tex | |
154 | ||
155 | @vskip 0pt plus 1filll | |
9fbcbd81 NC |
156 | Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
157 | 2000, 2001, 2002, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. | |
252b5132 | 158 | |
cf055d54 | 159 | Permission is granted to copy, distribute and/or modify this document |
793c5807 | 160 | under the terms of the GNU Free Documentation License, Version 1.3 |
cf055d54 NC |
161 | or any later version published by the Free Software Foundation; |
162 | with no Invariant Sections, with no Front-Cover Texts, and with no | |
163 | Back-Cover Texts. A copy of the license is included in the | |
c1253627 | 164 | section entitled ``GNU Free Documentation License''. |
252b5132 | 165 | |
252b5132 | 166 | @end titlepage |
4ecceb71 | 167 | @contents |
252b5132 | 168 | |
2e64b665 | 169 | @ifnottex |
252b5132 RH |
170 | @node Top |
171 | @top Using @value{AS} | |
172 | ||
e49e529d JM |
173 | This file is a user guide to the @sc{gnu} assembler @command{@value{AS}} |
174 | @ifset VERSION_PACKAGE | |
175 | @value{VERSION_PACKAGE} | |
176 | @end ifset | |
177 | version @value{VERSION}. | |
252b5132 | 178 | @ifclear GENERIC |
a4fb0134 | 179 | This version of the file describes @command{@value{AS}} configured to generate |
252b5132 RH |
180 | code for @value{TARGET} architectures. |
181 | @end ifclear | |
cf055d54 NC |
182 | |
183 | This document is distributed under the terms of the GNU Free | |
184 | Documentation License. A copy of the license is included in the | |
c1253627 | 185 | section entitled ``GNU Free Documentation License''. |
cf055d54 | 186 | |
252b5132 RH |
187 | @menu |
188 | * Overview:: Overview | |
189 | * Invoking:: Command-Line Options | |
190 | * Syntax:: Syntax | |
191 | * Sections:: Sections and Relocation | |
192 | * Symbols:: Symbols | |
193 | * Expressions:: Expressions | |
194 | * Pseudo Ops:: Assembler Directives | |
3a99f02f DJ |
195 | @ifset ELF |
196 | * Object Attributes:: Object Attributes | |
197 | @end ifset | |
252b5132 RH |
198 | * Machine Dependencies:: Machine Dependent Features |
199 | * Reporting Bugs:: Reporting Bugs | |
200 | * Acknowledgements:: Who Did What | |
cf055d54 | 201 | * GNU Free Documentation License:: GNU Free Documentation License |
28c9d252 | 202 | * AS Index:: AS Index |
252b5132 | 203 | @end menu |
2e64b665 | 204 | @end ifnottex |
252b5132 RH |
205 | |
206 | @node Overview | |
207 | @chapter Overview | |
208 | @iftex | |
a4fb0134 | 209 | This manual is a user guide to the @sc{gnu} assembler @command{@value{AS}}. |
252b5132 | 210 | @ifclear GENERIC |
a4fb0134 | 211 | This version of the manual describes @command{@value{AS}} configured to generate |
252b5132 RH |
212 | code for @value{TARGET} architectures. |
213 | @end ifclear | |
214 | @end iftex | |
215 | ||
216 | @cindex invocation summary | |
217 | @cindex option summary | |
218 | @cindex summary of options | |
a4fb0134 | 219 | Here is a brief summary of how to invoke @command{@value{AS}}. For details, |
96e9638b | 220 | see @ref{Invoking,,Command-Line Options}. |
252b5132 | 221 | |
0285c67d NC |
222 | @c man title AS the portable GNU assembler. |
223 | ||
a4fb0134 | 224 | @ignore |
0285c67d NC |
225 | @c man begin SEEALSO |
226 | gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}. | |
227 | @c man end | |
a4fb0134 | 228 | @end ignore |
0285c67d | 229 | |
252b5132 RH |
230 | @c We don't use deffn and friends for the following because they seem |
231 | @c to be limited to one line for the header. | |
232 | @smallexample | |
0285c67d | 233 | @c man begin SYNOPSIS |
83f10cb2 | 234 | @value{AS} [@b{-a}[@b{cdghlns}][=@var{file}]] [@b{--alternate}] [@b{-D}] |
955974c6 | 235 | [@b{--compress-debug-sections}] [@b{--nocompress-debug-sections}] |
3d6b762c | 236 | [@b{--debug-prefix-map} @var{old}=@var{new}] |
4bdd3565 NC |
237 | [@b{--defsym} @var{sym}=@var{val}] [@b{-f}] [@b{-g}] [@b{--gstabs}] |
238 | [@b{--gstabs+}] [@b{--gdwarf-2}] [@b{--help}] [@b{-I} @var{dir}] [@b{-J}] | |
239 | [@b{-K}] [@b{-L}] [@b{--listing-lhs-width}=@var{NUM}] | |
240 | [@b{--listing-lhs-width2}=@var{NUM}] [@b{--listing-rhs-width}=@var{NUM}] | |
241 | [@b{--listing-cont-lines}=@var{NUM}] [@b{--keep-locals}] [@b{-o} | |
242 | @var{objfile}] [@b{-R}] [@b{--reduce-memory-overheads}] [@b{--statistics}] | |
243 | [@b{-v}] [@b{-version}] [@b{--version}] [@b{-W}] [@b{--warn}] | |
a0b7da79 MM |
244 | [@b{--fatal-warnings}] [@b{-w}] [@b{-x}] [@b{-Z}] [@b{@@@var{FILE}}] |
245 | [@b{--target-help}] [@var{target-options}] | |
246 | [@b{--}|@var{files} @dots{}] | |
a4fb0134 SC |
247 | @c |
248 | @c Target dependent options are listed below. Keep the list sorted. | |
01642c12 | 249 | @c Add an empty line for separation. |
625e1353 RH |
250 | @ifset ALPHA |
251 | ||
252 | @emph{Target Alpha options:} | |
253 | [@b{-m@var{cpu}}] | |
254 | [@b{-mdebug} | @b{-no-mdebug}] | |
198f1251 | 255 | [@b{-replace} | @b{-noreplace}] |
625e1353 RH |
256 | [@b{-relax}] [@b{-g}] [@b{-G@var{size}}] |
257 | [@b{-F}] [@b{-32addr}] | |
258 | @end ifset | |
252b5132 | 259 | @ifset ARC |
a4fb0134 SC |
260 | |
261 | @emph{Target ARC options:} | |
262 | [@b{-marc[5|6|7|8]}] | |
263 | [@b{-EB}|@b{-EL}] | |
252b5132 RH |
264 | @end ifset |
265 | @ifset ARM | |
a4fb0134 SC |
266 | |
267 | @emph{Target ARM options:} | |
03b1477f | 268 | @c Don't document the deprecated options |
92081f48 HPN |
269 | [@b{-mcpu}=@var{processor}[+@var{extension}@dots{}]] |
270 | [@b{-march}=@var{architecture}[+@var{extension}@dots{}]] | |
33a392fb PB |
271 | [@b{-mfpu}=@var{floating-point-format}] |
272 | [@b{-mfloat-abi}=@var{abi}] | |
d507cf36 | 273 | [@b{-meabi}=@var{ver}] |
03b1477f | 274 | [@b{-mthumb}] |
a4fb0134 SC |
275 | [@b{-EB}|@b{-EL}] |
276 | [@b{-mapcs-32}|@b{-mapcs-26}|@b{-mapcs-float}| | |
277 | @b{-mapcs-reentrant}] | |
7f266840 | 278 | [@b{-mthumb-interwork}] [@b{-k}] |
252b5132 | 279 | @end ifset |
9982501a JZ |
280 | @ifset Blackfin |
281 | ||
282 | @emph{Target Blackfin options:} | |
283 | [@b{-mcpu}=@var{processor}[-@var{sirevision}]] | |
284 | [@b{-mfdpic}] | |
285 | [@b{-mno-fdpic}] | |
286 | [@b{-mnopic}] | |
287 | @end ifset | |
328eb32e HPN |
288 | @ifset CRIS |
289 | ||
290 | @emph{Target CRIS options:} | |
291 | [@b{--underscore} | @b{--no-underscore}] | |
292 | [@b{--pic}] [@b{-N}] | |
293 | [@b{--emulation=criself} | @b{--emulation=crisaout}] | |
ae57792d | 294 | [@b{--march=v0_v10} | @b{--march=v10} | @b{--march=v32} | @b{--march=common_v10_v32}] |
328eb32e HPN |
295 | @c Deprecated -- deliberately not documented. |
296 | @c [@b{-h}] [@b{-H}] | |
297 | @end ifset | |
252b5132 | 298 | @ifset D10V |
a4fb0134 SC |
299 | |
300 | @emph{Target D10V options:} | |
301 | [@b{-O}] | |
252b5132 RH |
302 | @end ifset |
303 | @ifset D30V | |
a4fb0134 SC |
304 | |
305 | @emph{Target D30V options:} | |
306 | [@b{-O}|@b{-n}|@b{-N}] | |
252b5132 RH |
307 | @end ifset |
308 | @ifset H8 | |
6fd4f6cc DD |
309 | |
310 | @emph{Target H8/300 options:} | |
311 | [-h-tick-hex] | |
252b5132 RH |
312 | @end ifset |
313 | @ifset HPPA | |
314 | @c HPPA has no machine-dependent assembler options (yet). | |
315 | @end ifset | |
a4fb0134 SC |
316 | @ifset I80386 |
317 | ||
318 | @emph{Target i386 options:} | |
12b55ccc | 319 | [@b{--32}|@b{--64}] [@b{-n}] |
1ef52f49 | 320 | [@b{-march}=@var{CPU}[+@var{EXTENSION}@dots{}]] [@b{-mtune}=@var{CPU}] |
252b5132 RH |
321 | @end ifset |
322 | @ifset I960 | |
a4fb0134 SC |
323 | |
324 | @emph{Target i960 options:} | |
252b5132 | 325 | @c see md_parse_option in tc-i960.c |
a4fb0134 SC |
326 | [@b{-ACA}|@b{-ACA_A}|@b{-ACB}|@b{-ACC}|@b{-AKA}|@b{-AKB}| |
327 | @b{-AKC}|@b{-AMC}] | |
328 | [@b{-b}] [@b{-no-relax}] | |
252b5132 | 329 | @end ifset |
587fe2b3 | 330 | @ifset IA64 |
a4fb0134 | 331 | |
9e32ca89 NC |
332 | @emph{Target IA-64 options:} |
333 | [@b{-mconstant-gp}|@b{-mauto-pic}] | |
334 | [@b{-milp32}|@b{-milp64}|@b{-mlp64}|@b{-mp64}] | |
335 | [@b{-mle}|@b{mbe}] | |
8c2fda1d | 336 | [@b{-mtune=itanium1}|@b{-mtune=itanium2}] |
970d6792 | 337 | [@b{-munwind-check=warning}|@b{-munwind-check=error}] |
91d777ee | 338 | [@b{-mhint.b=ok}|@b{-mhint.b=warning}|@b{-mhint.b=error}] |
9e32ca89 NC |
339 | [@b{-x}|@b{-xexplicit}] [@b{-xauto}] [@b{-xdebug}] |
340 | @end ifset | |
a40cbfa3 NC |
341 | @ifset IP2K |
342 | ||
343 | @emph{Target IP2K options:} | |
344 | [@b{-mip2022}|@b{-mip2022ext}] | |
345 | @end ifset | |
49f58d10 JB |
346 | @ifset M32C |
347 | ||
348 | @emph{Target M32C options:} | |
c54b5932 | 349 | [@b{-m32c}|@b{-m16c}] [-relax] [-h-tick-hex] |
49f58d10 | 350 | @end ifset |
587fe2b3 | 351 | @ifset M32R |
9e32ca89 | 352 | |
a4fb0134 SC |
353 | @emph{Target M32R options:} |
354 | [@b{--m32rx}|@b{--[no-]warn-explicit-parallel-conflicts}| | |
587fe2b3 | 355 | @b{--W[n]p}] |
ec694b89 | 356 | @end ifset |
252b5132 | 357 | @ifset M680X0 |
a4fb0134 SC |
358 | |
359 | @emph{Target M680X0 options:} | |
360 | [@b{-l}] [@b{-m68000}|@b{-m68010}|@b{-m68020}|@dots{}] | |
252b5132 | 361 | @end ifset |
60bcf0fa | 362 | @ifset M68HC11 |
a4fb0134 SC |
363 | |
364 | @emph{Target M68HC11 options:} | |
d01030e6 | 365 | [@b{-m68hc11}|@b{-m68hc12}|@b{-m68hcs12}] |
2f904664 SC |
366 | [@b{-mshort}|@b{-mlong}] |
367 | [@b{-mshort-double}|@b{-mlong-double}] | |
1370e33d | 368 | [@b{--force-long-branches}] [@b{--short-branches}] |
a4fb0134 SC |
369 | [@b{--strict-direct-mode}] [@b{--print-insn-syntax}] |
370 | [@b{--print-opcodes}] [@b{--generate-example}] | |
371 | @end ifset | |
372 | @ifset MCORE | |
373 | ||
374 | @emph{Target MCORE options:} | |
375 | [@b{-jsri2bsr}] [@b{-sifilter}] [@b{-relax}] | |
376 | [@b{-mcpu=[210|340]}] | |
60bcf0fa | 377 | @end ifset |
7ba29e2a NC |
378 | @ifset MICROBLAZE |
379 | @emph{Target MICROBLAZE options:} | |
380 | @c MicroBlaze has no machine-dependent assembler options. | |
381 | @end ifset | |
252b5132 | 382 | @ifset MIPS |
a4fb0134 SC |
383 | |
384 | @emph{Target MIPS options:} | |
78849248 | 385 | [@b{-nocpp}] [@b{-EL}] [@b{-EB}] [@b{-O}[@var{optimization level}]] |
437ee9d5 | 386 | [@b{-g}[@var{debug level}]] [@b{-G} @var{num}] [@b{-KPIC}] [@b{-call_shared}] |
0c000745 | 387 | [@b{-non_shared}] [@b{-xgot} [@b{-mvxworks-pic}] |
437ee9d5 TS |
388 | [@b{-mabi}=@var{ABI}] [@b{-32}] [@b{-n32}] [@b{-64}] [@b{-mfp32}] [@b{-mgp32}] |
389 | [@b{-march}=@var{CPU}] [@b{-mtune}=@var{CPU}] [@b{-mips1}] [@b{-mips2}] | |
af7ee8bf | 390 | [@b{-mips3}] [@b{-mips4}] [@b{-mips5}] [@b{-mips32}] [@b{-mips32r2}] |
5f74bc13 | 391 | [@b{-mips64}] [@b{-mips64r2}] |
437ee9d5 TS |
392 | [@b{-construct-floats}] [@b{-no-construct-floats}] |
393 | [@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}] | |
437ee9d5 | 394 | [@b{-mips16}] [@b{-no-mips16}] |
e16bfa71 | 395 | [@b{-msmartmips}] [@b{-mno-smartmips}] |
1f25f5d3 | 396 | [@b{-mips3d}] [@b{-no-mips3d}] |
deec1734 | 397 | [@b{-mdmx}] [@b{-no-mdmx}] |
2ef2b9ae | 398 | [@b{-mdsp}] [@b{-mno-dsp}] |
8b082fb1 | 399 | [@b{-mdspr2}] [@b{-mno-dspr2}] |
ef2e4d86 | 400 | [@b{-mmt}] [@b{-mno-mt}] |
2babba43 MR |
401 | [@b{-mfix7000}] [@b{-mno-fix7000}] |
402 | [@b{-mfix-vr4120}] [@b{-mno-fix-vr4120}] | |
403 | [@b{-mfix-vr4130}] [@b{-mno-fix-vr4130}] | |
ecb4347a | 404 | [@b{-mdebug}] [@b{-no-mdebug}] |
dcd410fe | 405 | [@b{-mpdr}] [@b{-mno-pdr}] |
3c3bdf30 NC |
406 | @end ifset |
407 | @ifset MMIX | |
a4fb0134 SC |
408 | |
409 | @emph{Target MMIX options:} | |
410 | [@b{--fixed-special-register-names}] [@b{--globalize-symbols}] | |
411 | [@b{--gnu-syntax}] [@b{--relax}] [@b{--no-predefined-symbols}] | |
412 | [@b{--no-expand}] [@b{--no-merge-gregs}] [@b{-x}] | |
973eb340 | 413 | [@b{--linker-allocated-gregs}] |
a4fb0134 SC |
414 | @end ifset |
415 | @ifset PDP11 | |
416 | ||
417 | @emph{Target PDP11 options:} | |
418 | [@b{-mpic}|@b{-mno-pic}] [@b{-mall}] [@b{-mno-extensions}] | |
419 | [@b{-m}@var{extension}|@b{-mno-}@var{extension}] | |
01642c12 | 420 | [@b{-m}@var{cpu}] [@b{-m}@var{machine}] |
a4fb0134 SC |
421 | @end ifset |
422 | @ifset PJ | |
423 | ||
424 | @emph{Target picoJava options:} | |
425 | [@b{-mb}|@b{-me}] | |
426 | @end ifset | |
427 | @ifset PPC | |
428 | ||
429 | @emph{Target PowerPC options:} | |
430 | [@b{-mpwrx}|@b{-mpwr2}|@b{-mpwr}|@b{-m601}|@b{-mppc}|@b{-mppc32}|@b{-m603}|@b{-m604}| | |
2f3bb96a | 431 | @b{-m403}|@b{-m405}|@b{-mppc64}|@b{-m620}|@b{-mppc64bridge}|@b{-mbooke}] |
9b4e5766 | 432 | [@b{-mcom}|@b{-many}|@b{-maltivec}|@b{-mvsx}] [@b{-memb}] |
a4fb0134 SC |
433 | [@b{-mregnames}|@b{-mno-regnames}] |
434 | [@b{-mrelocatable}|@b{-mrelocatable-lib}] | |
435 | [@b{-mlittle}|@b{-mlittle-endian}|@b{-mbig}|@b{-mbig-endian}] | |
436 | [@b{-msolaris}|@b{-mno-solaris}] | |
437 | @end ifset | |
c7927a3c NC |
438 | @ifset RX |
439 | ||
440 | @emph{Target RX options:} | |
441 | [@b{-mlittle-endian}|@b{-mbig-endian}] | |
442 | [@b{-m32bit-ints}|@b{-m16bit-ints}] | |
443 | [@b{-m32bit-doubles}|@b{-m64bit-doubles}] | |
444 | @end ifset | |
11c19e16 MS |
445 | @ifset S390 |
446 | ||
447 | @emph{Target s390 options:} | |
448 | [@b{-m31}|@b{-m64}] [@b{-mesa}|@b{-mzarch}] [@b{-march}=@var{CPU}] | |
449 | [@b{-mregnames}|@b{-mno-regnames}] | |
450 | [@b{-mwarn-areg-zero}] | |
451 | @end ifset | |
c3b7224a NC |
452 | @ifset SCORE |
453 | ||
454 | @emph{Target SCORE options:} | |
455 | [@b{-EB}][@b{-EL}][@b{-FIXDD}][@b{-NWARN}] | |
456 | [@b{-SCORE5}][@b{-SCORE5U}][@b{-SCORE7}][@b{-SCORE3}] | |
457 | [@b{-march=score7}][@b{-march=score3}] | |
458 | [@b{-USE_R1}][@b{-KPIC}][@b{-O0}][@b{-G} @var{num}][@b{-V}] | |
459 | @end ifset | |
a4fb0134 SC |
460 | @ifset SPARC |
461 | ||
462 | @emph{Target SPARC options:} | |
463 | @c The order here is important. See c-sparc.texi. | |
464 | [@b{-Av6}|@b{-Av7}|@b{-Av8}|@b{-Asparclet}|@b{-Asparclite} | |
465 | @b{-Av8plus}|@b{-Av8plusa}|@b{-Av9}|@b{-Av9a}] | |
466 | [@b{-xarch=v8plus}|@b{-xarch=v8plusa}] [@b{-bump}] | |
467 | [@b{-32}|@b{-64}] | |
468 | @end ifset | |
469 | @ifset TIC54X | |
470 | ||
471 | @emph{Target TIC54X options:} | |
01642c12 | 472 | [@b{-mcpu=54[123589]}|@b{-mcpu=54[56]lp}] [@b{-mfar-mode}|@b{-mf}] |
a4fb0134 SC |
473 | [@b{-merrors-to-file} @var{<filename>}|@b{-me} @var{<filename>}] |
474 | @end ifset | |
3c9b82ba | 475 | |
40b36596 JM |
476 | @ifset TIC6X |
477 | ||
478 | @emph{Target TIC6X options:} | |
479 | [@b{-march=@var{arch}}] [@b{-matomic}|@b{-mno-atomic}] | |
480 | [@b{-mbig-endian}|@b{-mlittle-endian}] | |
481 | @end ifset | |
482 | ||
3c9b82ba NC |
483 | @ifset Z80 |
484 | ||
485 | @emph{Target Z80 options:} | |
486 | [@b{-z80}] [@b{-r800}] | |
487 | [@b{ -ignore-undocumented-instructions}] [@b{-Wnud}] | |
488 | [@b{ -ignore-unportable-instructions}] [@b{-Wnup}] | |
489 | [@b{ -warn-undocumented-instructions}] [@b{-Wud}] | |
490 | [@b{ -warn-unportable-instructions}] [@b{-Wup}] | |
491 | [@b{ -forbid-undocumented-instructions}] [@b{-Fud}] | |
492 | [@b{ -forbid-unportable-instructions}] [@b{-Fup}] | |
493 | @end ifset | |
494 | ||
a4fb0134 SC |
495 | @ifset Z8000 |
496 | @c Z8000 has no machine-dependent assembler options | |
252b5132 | 497 | @end ifset |
e0001a05 NC |
498 | @ifset XTENSA |
499 | ||
500 | @emph{Target Xtensa options:} | |
43cd72b9 | 501 | [@b{--[no-]text-section-literals}] [@b{--[no-]absolute-literals}] |
e0001a05 | 502 | [@b{--[no-]target-align}] [@b{--[no-]longcalls}] |
43cd72b9 | 503 | [@b{--[no-]transform}] |
9456465c | 504 | [@b{--rename-section} @var{oldname}=@var{newname}] |
e0001a05 | 505 | @end ifset |
0285c67d | 506 | @c man end |
252b5132 RH |
507 | @end smallexample |
508 | ||
0285c67d NC |
509 | @c man begin OPTIONS |
510 | ||
a4fb0134 | 511 | @table @gcctabopt |
38fc1cb1 | 512 | @include at-file.texi |
a0b7da79 | 513 | |
83f10cb2 | 514 | @item -a[cdghlmns] |
252b5132 RH |
515 | Turn on listings, in any of a variety of ways: |
516 | ||
a4fb0134 | 517 | @table @gcctabopt |
252b5132 RH |
518 | @item -ac |
519 | omit false conditionals | |
520 | ||
521 | @item -ad | |
522 | omit debugging directives | |
523 | ||
83f10cb2 NC |
524 | @item -ag |
525 | include general information, like @value{AS} version and options passed | |
526 | ||
252b5132 RH |
527 | @item -ah |
528 | include high-level source | |
529 | ||
530 | @item -al | |
531 | include assembly | |
532 | ||
533 | @item -am | |
534 | include macro expansions | |
535 | ||
536 | @item -an | |
537 | omit forms processing | |
538 | ||
539 | @item -as | |
540 | include symbols | |
541 | ||
542 | @item =file | |
543 | set the name of the listing file | |
544 | @end table | |
545 | ||
546 | You may combine these options; for example, use @samp{-aln} for assembly | |
547 | listing without forms processing. The @samp{=file} option, if used, must be | |
548 | the last one. By itself, @samp{-a} defaults to @samp{-ahls}. | |
549 | ||
caa32fe5 | 550 | @item --alternate |
96e9638b BW |
551 | Begin in alternate macro mode. |
552 | @ifclear man | |
553 | @xref{Altmacro,,@code{.altmacro}}. | |
554 | @end ifclear | |
caa32fe5 | 555 | |
955974c6 CC |
556 | @item --compress-debug-sections |
557 | Compress DWARF debug sections using zlib. The debug sections are renamed | |
558 | to begin with @samp{.zdebug}, and the resulting object file may not be | |
559 | compatible with older linkers and object file utilities. | |
560 | ||
561 | @item --nocompress-debug-sections | |
562 | Do not compress DWARF debug sections. This is the default. | |
563 | ||
252b5132 RH |
564 | @item -D |
565 | Ignored. This option is accepted for script compatibility with calls to | |
566 | other assemblers. | |
567 | ||
3d6b762c JM |
568 | @item --debug-prefix-map @var{old}=@var{new} |
569 | When assembling files in directory @file{@var{old}}, record debugging | |
570 | information describing them as in @file{@var{new}} instead. | |
571 | ||
252b5132 RH |
572 | @item --defsym @var{sym}=@var{value} |
573 | Define the symbol @var{sym} to be @var{value} before assembling the input file. | |
574 | @var{value} must be an integer constant. As in C, a leading @samp{0x} | |
bf083c64 NC |
575 | indicates a hexadecimal value, and a leading @samp{0} indicates an octal |
576 | value. The value of the symbol can be overridden inside a source file via the | |
577 | use of a @code{.set} pseudo-op. | |
252b5132 RH |
578 | |
579 | @item -f | |
580 | ``fast''---skip whitespace and comment preprocessing (assume source is | |
581 | compiler output). | |
582 | ||
329e276d NC |
583 | @item -g |
584 | @itemx --gen-debug | |
585 | Generate debugging information for each assembler source line using whichever | |
586 | debug format is preferred by the target. This currently means either STABS, | |
587 | ECOFF or DWARF2. | |
588 | ||
252b5132 RH |
589 | @item --gstabs |
590 | Generate stabs debugging information for each assembler line. This | |
591 | may help debugging assembler code, if the debugger can handle it. | |
592 | ||
05da4302 NC |
593 | @item --gstabs+ |
594 | Generate stabs debugging information for each assembler line, with GNU | |
595 | extensions that probably only gdb can handle, and that could make other | |
596 | debuggers crash or refuse to read your program. This | |
597 | may help debugging assembler code. Currently the only GNU extension is | |
598 | the location of the current working directory at assembling time. | |
599 | ||
329e276d | 600 | @item --gdwarf-2 |
cdf82bcf | 601 | Generate DWARF2 debugging information for each assembler line. This |
c1253627 | 602 | may help debugging assembler code, if the debugger can handle it. Note---this |
85a39694 | 603 | option is only supported by some targets, not all of them. |
cdf82bcf | 604 | |
252b5132 RH |
605 | @item --help |
606 | Print a summary of the command line options and exit. | |
607 | ||
ea20a7da CC |
608 | @item --target-help |
609 | Print a summary of all target specific options and exit. | |
610 | ||
252b5132 RH |
611 | @item -I @var{dir} |
612 | Add directory @var{dir} to the search list for @code{.include} directives. | |
613 | ||
614 | @item -J | |
615 | Don't warn about signed overflow. | |
616 | ||
617 | @item -K | |
618 | @ifclear DIFF-TBL-KLUGE | |
619 | This option is accepted but has no effect on the @value{TARGET} family. | |
620 | @end ifclear | |
621 | @ifset DIFF-TBL-KLUGE | |
622 | Issue warnings when difference tables altered for long displacements. | |
623 | @end ifset | |
624 | ||
625 | @item -L | |
626 | @itemx --keep-locals | |
ba83aca1 BW |
627 | Keep (in the symbol table) local symbols. These symbols start with |
628 | system-specific local label prefixes, typically @samp{.L} for ELF systems | |
629 | or @samp{L} for traditional a.out systems. | |
630 | @ifclear man | |
631 | @xref{Symbol Names}. | |
632 | @end ifclear | |
252b5132 | 633 | |
c3a27914 NC |
634 | @item --listing-lhs-width=@var{number} |
635 | Set the maximum width, in words, of the output data column for an assembler | |
636 | listing to @var{number}. | |
637 | ||
638 | @item --listing-lhs-width2=@var{number} | |
639 | Set the maximum width, in words, of the output data column for continuation | |
640 | lines in an assembler listing to @var{number}. | |
641 | ||
642 | @item --listing-rhs-width=@var{number} | |
643 | Set the maximum width of an input source line, as displayed in a listing, to | |
644 | @var{number} bytes. | |
645 | ||
646 | @item --listing-cont-lines=@var{number} | |
647 | Set the maximum number of lines printed in a listing for a single line of input | |
648 | to @var{number} + 1. | |
649 | ||
252b5132 | 650 | @item -o @var{objfile} |
a4fb0134 | 651 | Name the object-file output from @command{@value{AS}} @var{objfile}. |
252b5132 RH |
652 | |
653 | @item -R | |
654 | Fold the data section into the text section. | |
655 | ||
4bdd3565 NC |
656 | @kindex --hash-size=@var{number} |
657 | Set the default size of GAS's hash tables to a prime number close to | |
658 | @var{number}. Increasing this value can reduce the length of time it takes the | |
659 | assembler to perform its tasks, at the expense of increasing the assembler's | |
660 | memory requirements. Similarly reducing this value can reduce the memory | |
661 | requirements at the expense of speed. | |
662 | ||
663 | @item --reduce-memory-overheads | |
664 | This option reduces GAS's memory requirements, at the expense of making the | |
665 | assembly processes slower. Currently this switch is a synonym for | |
666 | @samp{--hash-size=4051}, but in the future it may have other effects as well. | |
667 | ||
252b5132 RH |
668 | @item --statistics |
669 | Print the maximum space (in bytes) and total time (in seconds) used by | |
670 | assembly. | |
671 | ||
672 | @item --strip-local-absolute | |
673 | Remove local absolute symbols from the outgoing symbol table. | |
674 | ||
675 | @item -v | |
676 | @itemx -version | |
a4fb0134 | 677 | Print the @command{as} version. |
252b5132 RH |
678 | |
679 | @item --version | |
a4fb0134 | 680 | Print the @command{as} version and exit. |
252b5132 RH |
681 | |
682 | @item -W | |
2bdd6cf5 | 683 | @itemx --no-warn |
252b5132 RH |
684 | Suppress warning messages. |
685 | ||
2bdd6cf5 GK |
686 | @item --fatal-warnings |
687 | Treat warnings as errors. | |
688 | ||
689 | @item --warn | |
690 | Don't suppress warning messages or treat them as errors. | |
691 | ||
252b5132 RH |
692 | @item -w |
693 | Ignored. | |
694 | ||
695 | @item -x | |
696 | Ignored. | |
697 | ||
698 | @item -Z | |
699 | Generate an object file even after errors. | |
700 | ||
701 | @item -- | @var{files} @dots{} | |
702 | Standard input, or source files to assemble. | |
703 | ||
704 | @end table | |
705 | ||
706 | @ifset ARC | |
707 | The following options are available when @value{AS} is configured for | |
708 | an ARC processor. | |
709 | ||
a4fb0134 | 710 | @table @gcctabopt |
0d2bcfaf NC |
711 | @item -marc[5|6|7|8] |
712 | This option selects the core processor variant. | |
713 | @item -EB | -EL | |
714 | Select either big-endian (-EB) or little-endian (-EL) output. | |
252b5132 RH |
715 | @end table |
716 | @end ifset | |
717 | ||
718 | @ifset ARM | |
719 | The following options are available when @value{AS} is configured for the ARM | |
720 | processor family. | |
721 | ||
a4fb0134 | 722 | @table @gcctabopt |
92081f48 | 723 | @item -mcpu=@var{processor}[+@var{extension}@dots{}] |
cdf82bcf | 724 | Specify which ARM processor variant is the target. |
92081f48 | 725 | @item -march=@var{architecture}[+@var{extension}@dots{}] |
cdf82bcf | 726 | Specify which ARM architecture variant is used by the target. |
03b1477f | 727 | @item -mfpu=@var{floating-point-format} |
a349d9dd | 728 | Select which Floating Point architecture is the target. |
33a392fb PB |
729 | @item -mfloat-abi=@var{abi} |
730 | Select which floating point ABI is in use. | |
03b1477f RE |
731 | @item -mthumb |
732 | Enable Thumb only instruction decoding. | |
7f266840 | 733 | @item -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant |
252b5132 RH |
734 | Select which procedure calling convention is in use. |
735 | @item -EB | -EL | |
736 | Select either big-endian (-EB) or little-endian (-EL) output. | |
cdf82bcf NC |
737 | @item -mthumb-interwork |
738 | Specify that the code has been generated with interworking between Thumb and | |
739 | ARM code in mind. | |
740 | @item -k | |
741 | Specify that PIC code has been generated. | |
252b5132 RH |
742 | @end table |
743 | @end ifset | |
744 | ||
9982501a JZ |
745 | @ifset Blackfin |
746 | The following options are available when @value{AS} is configured for | |
747 | the Blackfin processor family. | |
748 | ||
749 | @table @gcctabopt | |
750 | @item -mcpu=@var{processor}@r{[}-@var{sirevision}@r{]} | |
751 | This option specifies the target processor. The optional @var{sirevision} | |
752 | is not used in assembler. | |
753 | @item -mfdpic | |
754 | Assemble for the FDPIC ABI. | |
1f9bb1ca AS |
755 | @item -mno-fdpic |
756 | @itemx -mnopic | |
9982501a JZ |
757 | Disable -mfdpic. |
758 | @end table | |
759 | @end ifset | |
760 | ||
328eb32e HPN |
761 | @ifset CRIS |
762 | See the info pages for documentation of the CRIS-specific options. | |
763 | @end ifset | |
764 | ||
252b5132 RH |
765 | @ifset D10V |
766 | The following options are available when @value{AS} is configured for | |
767 | a D10V processor. | |
a4fb0134 | 768 | @table @gcctabopt |
252b5132 RH |
769 | @cindex D10V optimization |
770 | @cindex optimization, D10V | |
771 | @item -O | |
772 | Optimize output by parallelizing instructions. | |
773 | @end table | |
774 | @end ifset | |
775 | ||
776 | @ifset D30V | |
777 | The following options are available when @value{AS} is configured for a D30V | |
778 | processor. | |
a4fb0134 | 779 | @table @gcctabopt |
252b5132 RH |
780 | @cindex D30V optimization |
781 | @cindex optimization, D30V | |
782 | @item -O | |
783 | Optimize output by parallelizing instructions. | |
784 | ||
785 | @cindex D30V nops | |
786 | @item -n | |
787 | Warn when nops are generated. | |
788 | ||
789 | @cindex D30V nops after 32-bit multiply | |
790 | @item -N | |
791 | Warn when a nop after a 32-bit multiply instruction is generated. | |
792 | @end table | |
793 | @end ifset | |
794 | ||
795 | @ifset I960 | |
796 | The following options are available when @value{AS} is configured for the | |
797 | Intel 80960 processor. | |
798 | ||
a4fb0134 | 799 | @table @gcctabopt |
252b5132 RH |
800 | @item -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC |
801 | Specify which variant of the 960 architecture is the target. | |
802 | ||
803 | @item -b | |
804 | Add code to collect statistics about branches taken. | |
805 | ||
806 | @item -no-relax | |
807 | Do not alter compare-and-branch instructions for long displacements; | |
808 | error if necessary. | |
809 | ||
810 | @end table | |
811 | @end ifset | |
812 | ||
a40cbfa3 NC |
813 | @ifset IP2K |
814 | The following options are available when @value{AS} is configured for the | |
ec88d317 | 815 | Ubicom IP2K series. |
a40cbfa3 NC |
816 | |
817 | @table @gcctabopt | |
818 | ||
819 | @item -mip2022ext | |
820 | Specifies that the extended IP2022 instructions are allowed. | |
821 | ||
822 | @item -mip2022 | |
8dfa0188 | 823 | Restores the default behaviour, which restricts the permitted instructions to |
a40cbfa3 NC |
824 | just the basic IP2022 ones. |
825 | ||
826 | @end table | |
827 | @end ifset | |
828 | ||
49f58d10 JB |
829 | @ifset M32C |
830 | The following options are available when @value{AS} is configured for the | |
831 | Renesas M32C and M16C processors. | |
832 | ||
833 | @table @gcctabopt | |
834 | ||
835 | @item -m32c | |
836 | Assemble M32C instructions. | |
837 | ||
838 | @item -m16c | |
839 | Assemble M16C instructions (the default). | |
840 | ||
c54b5932 DD |
841 | @item -relax |
842 | Enable support for link-time relaxations. | |
843 | ||
844 | @item -h-tick-hex | |
845 | Support H'00 style hex constants in addition to 0x00 style. | |
846 | ||
49f58d10 JB |
847 | @end table |
848 | @end ifset | |
849 | ||
ec694b89 NC |
850 | @ifset M32R |
851 | The following options are available when @value{AS} is configured for the | |
26597c86 | 852 | Renesas M32R (formerly Mitsubishi M32R) series. |
ec694b89 | 853 | |
a4fb0134 | 854 | @table @gcctabopt |
ec694b89 NC |
855 | |
856 | @item --m32rx | |
857 | Specify which processor in the M32R family is the target. The default | |
858 | is normally the M32R, but this option changes it to the M32RX. | |
859 | ||
860 | @item --warn-explicit-parallel-conflicts or --Wp | |
861 | Produce warning messages when questionable parallel constructs are | |
01642c12 | 862 | encountered. |
ec694b89 NC |
863 | |
864 | @item --no-warn-explicit-parallel-conflicts or --Wnp | |
01642c12 RM |
865 | Do not produce warning messages when questionable parallel constructs are |
866 | encountered. | |
ec694b89 NC |
867 | |
868 | @end table | |
869 | @end ifset | |
252b5132 RH |
870 | |
871 | @ifset M680X0 | |
872 | The following options are available when @value{AS} is configured for the | |
873 | Motorola 68000 series. | |
874 | ||
a4fb0134 | 875 | @table @gcctabopt |
252b5132 RH |
876 | |
877 | @item -l | |
878 | Shorten references to undefined symbols, to one word instead of two. | |
879 | ||
0285c67d NC |
880 | @item -m68000 | -m68008 | -m68010 | -m68020 | -m68030 |
881 | @itemx | -m68040 | -m68060 | -m68302 | -m68331 | -m68332 | |
882 | @itemx | -m68333 | -m68340 | -mcpu32 | -m5200 | |
252b5132 RH |
883 | Specify what processor in the 68000 family is the target. The default |
884 | is normally the 68020, but this can be changed at configuration time. | |
885 | ||
886 | @item -m68881 | -m68882 | -mno-68881 | -mno-68882 | |
887 | The target machine does (or does not) have a floating-point coprocessor. | |
888 | The default is to assume a coprocessor for 68020, 68030, and cpu32. Although | |
889 | the basic 68000 is not compatible with the 68881, a combination of the | |
890 | two can be specified, since it's possible to do emulation of the | |
891 | coprocessor instructions with the main processor. | |
892 | ||
893 | @item -m68851 | -mno-68851 | |
894 | The target machine does (or does not) have a memory-management | |
895 | unit coprocessor. The default is to assume an MMU for 68020 and up. | |
896 | ||
897 | @end table | |
898 | @end ifset | |
899 | ||
e135f41b NC |
900 | @ifset PDP11 |
901 | ||
902 | For details about the PDP-11 machine dependent features options, | |
903 | see @ref{PDP-11-Options}. | |
904 | ||
a4fb0134 | 905 | @table @gcctabopt |
e135f41b NC |
906 | @item -mpic | -mno-pic |
907 | Generate position-independent (or position-dependent) code. The | |
a4fb0134 | 908 | default is @option{-mpic}. |
e135f41b NC |
909 | |
910 | @item -mall | |
911 | @itemx -mall-extensions | |
912 | Enable all instruction set extensions. This is the default. | |
913 | ||
914 | @item -mno-extensions | |
915 | Disable all instruction set extensions. | |
916 | ||
917 | @item -m@var{extension} | -mno-@var{extension} | |
918 | Enable (or disable) a particular instruction set extension. | |
919 | ||
920 | @item -m@var{cpu} | |
921 | Enable the instruction set extensions supported by a particular CPU, and | |
922 | disable all other extensions. | |
923 | ||
924 | @item -m@var{machine} | |
925 | Enable the instruction set extensions supported by a particular machine | |
926 | model, and disable all other extensions. | |
927 | @end table | |
928 | ||
929 | @end ifset | |
930 | ||
041dd5a9 ILT |
931 | @ifset PJ |
932 | The following options are available when @value{AS} is configured for | |
933 | a picoJava processor. | |
934 | ||
a4fb0134 | 935 | @table @gcctabopt |
041dd5a9 ILT |
936 | |
937 | @cindex PJ endianness | |
938 | @cindex endianness, PJ | |
939 | @cindex big endian output, PJ | |
940 | @item -mb | |
941 | Generate ``big endian'' format output. | |
942 | ||
943 | @cindex little endian output, PJ | |
944 | @item -ml | |
945 | Generate ``little endian'' format output. | |
946 | ||
947 | @end table | |
948 | @end ifset | |
949 | ||
60bcf0fa NC |
950 | @ifset M68HC11 |
951 | The following options are available when @value{AS} is configured for the | |
952 | Motorola 68HC11 or 68HC12 series. | |
953 | ||
a4fb0134 | 954 | @table @gcctabopt |
60bcf0fa | 955 | |
d01030e6 | 956 | @item -m68hc11 | -m68hc12 | -m68hcs12 |
60bcf0fa NC |
957 | Specify what processor is the target. The default is |
958 | defined by the configuration option when building the assembler. | |
959 | ||
2f904664 SC |
960 | @item -mshort |
961 | Specify to use the 16-bit integer ABI. | |
962 | ||
963 | @item -mlong | |
01642c12 | 964 | Specify to use the 32-bit integer ABI. |
2f904664 SC |
965 | |
966 | @item -mshort-double | |
01642c12 | 967 | Specify to use the 32-bit double ABI. |
2f904664 SC |
968 | |
969 | @item -mlong-double | |
01642c12 | 970 | Specify to use the 64-bit double ABI. |
2f904664 | 971 | |
1370e33d | 972 | @item --force-long-branches |
60bcf0fa NC |
973 | Relative branches are turned into absolute ones. This concerns |
974 | conditional branches, unconditional branches and branches to a | |
975 | sub routine. | |
976 | ||
1370e33d NC |
977 | @item -S | --short-branches |
978 | Do not turn relative branches into absolute ones | |
60bcf0fa NC |
979 | when the offset is out of range. |
980 | ||
981 | @item --strict-direct-mode | |
982 | Do not turn the direct addressing mode into extended addressing mode | |
983 | when the instruction does not support direct addressing mode. | |
984 | ||
985 | @item --print-insn-syntax | |
986 | Print the syntax of instruction in case of error. | |
987 | ||
988 | @item --print-opcodes | |
989 | print the list of instructions with syntax and then exit. | |
990 | ||
991 | @item --generate-example | |
992 | print an example of instruction for each possible instruction and then exit. | |
a4fb0134 | 993 | This option is only useful for testing @command{@value{AS}}. |
60bcf0fa NC |
994 | |
995 | @end table | |
996 | @end ifset | |
997 | ||
252b5132 | 998 | @ifset SPARC |
a4fb0134 | 999 | The following options are available when @command{@value{AS}} is configured |
252b5132 RH |
1000 | for the SPARC architecture: |
1001 | ||
a4fb0134 | 1002 | @table @gcctabopt |
252b5132 RH |
1003 | @item -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite |
1004 | @itemx -Av8plus | -Av8plusa | -Av9 | -Av9a | |
1005 | Explicitly select a variant of the SPARC architecture. | |
1006 | ||
1007 | @samp{-Av8plus} and @samp{-Av8plusa} select a 32 bit environment. | |
1008 | @samp{-Av9} and @samp{-Av9a} select a 64 bit environment. | |
1009 | ||
1010 | @samp{-Av8plusa} and @samp{-Av9a} enable the SPARC V9 instruction set with | |
1011 | UltraSPARC extensions. | |
1012 | ||
1013 | @item -xarch=v8plus | -xarch=v8plusa | |
1014 | For compatibility with the Solaris v9 assembler. These options are | |
1015 | equivalent to -Av8plus and -Av8plusa, respectively. | |
1016 | ||
1017 | @item -bump | |
1018 | Warn when the assembler switches to another architecture. | |
1019 | @end table | |
1020 | @end ifset | |
1021 | ||
39bec121 TW |
1022 | @ifset TIC54X |
1023 | The following options are available when @value{AS} is configured for the 'c54x | |
01642c12 | 1024 | architecture. |
39bec121 | 1025 | |
a4fb0134 | 1026 | @table @gcctabopt |
39bec121 TW |
1027 | @item -mfar-mode |
1028 | Enable extended addressing mode. All addresses and relocations will assume | |
1029 | extended addressing (usually 23 bits). | |
1030 | @item -mcpu=@var{CPU_VERSION} | |
1031 | Sets the CPU version being compiled for. | |
1032 | @item -merrors-to-file @var{FILENAME} | |
1033 | Redirect error output to a file, for broken systems which don't support such | |
1034 | behaviour in the shell. | |
1035 | @end table | |
1036 | @end ifset | |
1037 | ||
252b5132 RH |
1038 | @ifset MIPS |
1039 | The following options are available when @value{AS} is configured for | |
437ee9d5 | 1040 | a @sc{mips} processor. |
252b5132 | 1041 | |
a4fb0134 | 1042 | @table @gcctabopt |
252b5132 RH |
1043 | @item -G @var{num} |
1044 | This option sets the largest size of an object that can be referenced | |
1045 | implicitly with the @code{gp} register. It is only accepted for targets that | |
1046 | use ECOFF format, such as a DECstation running Ultrix. The default value is 8. | |
1047 | ||
1048 | @cindex MIPS endianness | |
1049 | @cindex endianness, MIPS | |
1050 | @cindex big endian output, MIPS | |
1051 | @item -EB | |
1052 | Generate ``big endian'' format output. | |
1053 | ||
1054 | @cindex little endian output, MIPS | |
1055 | @item -EL | |
1056 | Generate ``little endian'' format output. | |
1057 | ||
1058 | @cindex MIPS ISA | |
1059 | @item -mips1 | |
1060 | @itemx -mips2 | |
1061 | @itemx -mips3 | |
e7af610e | 1062 | @itemx -mips4 |
437ee9d5 | 1063 | @itemx -mips5 |
e7af610e | 1064 | @itemx -mips32 |
af7ee8bf | 1065 | @itemx -mips32r2 |
4058e45f | 1066 | @itemx -mips64 |
5f74bc13 | 1067 | @itemx -mips64r2 |
437ee9d5 TS |
1068 | Generate code for a particular @sc{mips} Instruction Set Architecture level. |
1069 | @samp{-mips1} is an alias for @samp{-march=r3000}, @samp{-mips2} is an | |
1070 | alias for @samp{-march=r6000}, @samp{-mips3} is an alias for | |
1071 | @samp{-march=r4000} and @samp{-mips4} is an alias for @samp{-march=r8000}. | |
5f74bc13 CD |
1072 | @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips64}, and |
1073 | @samp{-mips64r2} | |
af7ee8bf | 1074 | correspond to generic |
5f74bc13 CD |
1075 | @samp{MIPS V}, @samp{MIPS32}, @samp{MIPS32 Release 2}, @samp{MIPS64}, |
1076 | and @samp{MIPS64 Release 2} | |
1077 | ISA processors, respectively. | |
437ee9d5 TS |
1078 | |
1079 | @item -march=@var{CPU} | |
1080 | Generate code for a particular @sc{mips} cpu. | |
1081 | ||
1082 | @item -mtune=@var{cpu} | |
1083 | Schedule and tune for a particular @sc{mips} cpu. | |
1084 | ||
1085 | @item -mfix7000 | |
1086 | @itemx -mno-fix7000 | |
1087 | Cause nops to be inserted if the read of the destination register | |
1088 | of an mfhi or mflo instruction occurs in the following two instructions. | |
1089 | ||
ecb4347a DJ |
1090 | @item -mdebug |
1091 | @itemx -no-mdebug | |
1092 | Cause stabs-style debugging output to go into an ECOFF-style .mdebug | |
1093 | section instead of the standard ELF .stabs sections. | |
1094 | ||
dcd410fe RO |
1095 | @item -mpdr |
1096 | @itemx -mno-pdr | |
1097 | Control generation of @code{.pdr} sections. | |
1098 | ||
437ee9d5 TS |
1099 | @item -mgp32 |
1100 | @itemx -mfp32 | |
1101 | The register sizes are normally inferred from the ISA and ABI, but these | |
1102 | flags force a certain group of registers to be treated as 32 bits wide at | |
1103 | all times. @samp{-mgp32} controls the size of general-purpose registers | |
1104 | and @samp{-mfp32} controls the size of floating-point registers. | |
1105 | ||
1106 | @item -mips16 | |
1107 | @itemx -no-mips16 | |
1108 | Generate code for the MIPS 16 processor. This is equivalent to putting | |
1109 | @code{.set mips16} at the start of the assembly file. @samp{-no-mips16} | |
1110 | turns off this option. | |
252b5132 | 1111 | |
e16bfa71 TS |
1112 | @item -msmartmips |
1113 | @itemx -mno-smartmips | |
1114 | Enables the SmartMIPS extension to the MIPS32 instruction set. This is | |
1115 | equivalent to putting @code{.set smartmips} at the start of the assembly file. | |
1116 | @samp{-mno-smartmips} turns off this option. | |
1117 | ||
1f25f5d3 CD |
1118 | @item -mips3d |
1119 | @itemx -no-mips3d | |
1120 | Generate code for the MIPS-3D Application Specific Extension. | |
1121 | This tells the assembler to accept MIPS-3D instructions. | |
1122 | @samp{-no-mips3d} turns off this option. | |
1123 | ||
deec1734 CD |
1124 | @item -mdmx |
1125 | @itemx -no-mdmx | |
1126 | Generate code for the MDMX Application Specific Extension. | |
1127 | This tells the assembler to accept MDMX instructions. | |
1128 | @samp{-no-mdmx} turns off this option. | |
1129 | ||
2ef2b9ae CF |
1130 | @item -mdsp |
1131 | @itemx -mno-dsp | |
8b082fb1 TS |
1132 | Generate code for the DSP Release 1 Application Specific Extension. |
1133 | This tells the assembler to accept DSP Release 1 instructions. | |
2ef2b9ae CF |
1134 | @samp{-mno-dsp} turns off this option. |
1135 | ||
8b082fb1 TS |
1136 | @item -mdspr2 |
1137 | @itemx -mno-dspr2 | |
1138 | Generate code for the DSP Release 2 Application Specific Extension. | |
1139 | This option implies -mdsp. | |
1140 | This tells the assembler to accept DSP Release 2 instructions. | |
1141 | @samp{-mno-dspr2} turns off this option. | |
1142 | ||
ef2e4d86 CF |
1143 | @item -mmt |
1144 | @itemx -mno-mt | |
1145 | Generate code for the MT Application Specific Extension. | |
1146 | This tells the assembler to accept MT instructions. | |
1147 | @samp{-mno-mt} turns off this option. | |
1148 | ||
437ee9d5 TS |
1149 | @item --construct-floats |
1150 | @itemx --no-construct-floats | |
1151 | The @samp{--no-construct-floats} option disables the construction of | |
1152 | double width floating point constants by loading the two halves of the | |
1153 | value into the two single width floating point registers that make up | |
1154 | the double width register. By default @samp{--construct-floats} is | |
1155 | selected, allowing construction of these floating point constants. | |
252b5132 RH |
1156 | |
1157 | @cindex emulation | |
1158 | @item --emulation=@var{name} | |
a4fb0134 | 1159 | This option causes @command{@value{AS}} to emulate @command{@value{AS}} configured |
252b5132 RH |
1160 | for some other target, in all respects, including output format (choosing |
1161 | between ELF and ECOFF only), handling of pseudo-opcodes which may generate | |
1162 | debugging information or store symbol table information, and default | |
1163 | endianness. The available configuration names are: @samp{mipsecoff}, | |
1164 | @samp{mipself}, @samp{mipslecoff}, @samp{mipsbecoff}, @samp{mipslelf}, | |
1165 | @samp{mipsbelf}. The first two do not alter the default endianness from that | |
1166 | of the primary target for which the assembler was configured; the others change | |
1167 | the default to little- or big-endian as indicated by the @samp{b} or @samp{l} | |
1168 | in the name. Using @samp{-EB} or @samp{-EL} will override the endianness | |
1169 | selection in any case. | |
1170 | ||
1171 | This option is currently supported only when the primary target | |
437ee9d5 | 1172 | @command{@value{AS}} is configured for is a @sc{mips} ELF or ECOFF target. |
252b5132 RH |
1173 | Furthermore, the primary target or others specified with |
1174 | @samp{--enable-targets=@dots{}} at configuration time must include support for | |
1175 | the other format, if both are to be available. For example, the Irix 5 | |
1176 | configuration includes support for both. | |
1177 | ||
1178 | Eventually, this option will support more configurations, with more | |
1179 | fine-grained control over the assembler's behavior, and will be supported for | |
1180 | more processors. | |
1181 | ||
1182 | @item -nocpp | |
a4fb0134 | 1183 | @command{@value{AS}} ignores this option. It is accepted for compatibility with |
252b5132 RH |
1184 | the native tools. |
1185 | ||
252b5132 RH |
1186 | @item --trap |
1187 | @itemx --no-trap | |
1188 | @itemx --break | |
1189 | @itemx --no-break | |
1190 | Control how to deal with multiplication overflow and division by zero. | |
1191 | @samp{--trap} or @samp{--no-break} (which are synonyms) take a trap exception | |
1192 | (and only work for Instruction Set Architecture level 2 and higher); | |
1193 | @samp{--break} or @samp{--no-trap} (also synonyms, and the default) take a | |
1194 | break exception. | |
63486801 L |
1195 | |
1196 | @item -n | |
a4fb0134 | 1197 | When this option is used, @command{@value{AS}} will issue a warning every |
63486801 | 1198 | time it generates a nop instruction from a macro. |
252b5132 RH |
1199 | @end table |
1200 | @end ifset | |
1201 | ||
1202 | @ifset MCORE | |
1203 | The following options are available when @value{AS} is configured for | |
1204 | an MCore processor. | |
1205 | ||
a4fb0134 | 1206 | @table @gcctabopt |
252b5132 RH |
1207 | @item -jsri2bsr |
1208 | @itemx -nojsri2bsr | |
1209 | Enable or disable the JSRI to BSR transformation. By default this is enabled. | |
1210 | The command line option @samp{-nojsri2bsr} can be used to disable it. | |
1211 | ||
1212 | @item -sifilter | |
1213 | @itemx -nosifilter | |
1214 | Enable or disable the silicon filter behaviour. By default this is disabled. | |
a349d9dd | 1215 | The default can be overridden by the @samp{-sifilter} command line option. |
252b5132 RH |
1216 | |
1217 | @item -relax | |
1218 | Alter jump instructions for long displacements. | |
1219 | ||
ec694b89 NC |
1220 | @item -mcpu=[210|340] |
1221 | Select the cpu type on the target hardware. This controls which instructions | |
1222 | can be assembled. | |
1223 | ||
1224 | @item -EB | |
1225 | Assemble for a big endian target. | |
1226 | ||
1227 | @item -EL | |
1228 | Assemble for a little endian target. | |
252b5132 RH |
1229 | |
1230 | @end table | |
1231 | @end ifset | |
1232 | ||
3c3bdf30 NC |
1233 | @ifset MMIX |
1234 | See the info pages for documentation of the MMIX-specific options. | |
1235 | @end ifset | |
1236 | ||
046d31c2 NC |
1237 | @ifset RX |
1238 | See the info pages for documentation of the RX-specific options. | |
1239 | @end ifset | |
1240 | ||
11c19e16 MS |
1241 | @ifset S390 |
1242 | The following options are available when @value{AS} is configured for the s390 | |
1243 | processor family. | |
1244 | ||
1245 | @table @gcctabopt | |
1246 | @item -m31 | |
1247 | @itemx -m64 | |
1248 | Select the word size, either 31/32 bits or 64 bits. | |
1249 | @item -mesa | |
1250 | @item -mzarch | |
1251 | Select the architecture mode, either the Enterprise System | |
1252 | Architecture (esa) or the z/Architecture mode (zarch). | |
1253 | @item -march=@var{processor} | |
1254 | Specify which s390 processor variant is the target, @samp{g6}, @samp{g6}, | |
1255 | @samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, or @samp{z10}. | |
1256 | @item -mregnames | |
1257 | @itemx -mno-regnames | |
1258 | Allow or disallow symbolic names for registers. | |
1259 | @item -mwarn-areg-zero | |
1260 | Warn whenever the operand for a base or index register has been specified | |
1261 | but evaluates to zero. | |
1262 | @end table | |
1263 | @end ifset | |
1264 | ||
40b36596 JM |
1265 | @ifset TIC6X |
1266 | The following options are available when @value{AS} is configured for a | |
1267 | TMS320C6000 processor. | |
1268 | ||
1269 | @table @gcctabopt | |
1270 | @item -march=@var{arch} | |
1271 | Enable (only) instructions from architecture @var{arch}. By default, | |
1272 | all instructions are permitted. | |
1273 | ||
1274 | The following values of @var{arch} are accepted: @code{c62x}, | |
1275 | @code{c64x}, @code{c64x+}, @code{c67x}, @code{c67x+}, @code{c674x}. | |
1276 | ||
1277 | @item -matomic | |
1278 | @itemx -mno-atomic | |
1279 | Enable or disable the optional C64x+ atomic operation instructions. | |
1280 | By default, they are enabled if no @option{-march} option is given, or | |
1281 | if an architecture is specified with @option{-march} that implies | |
1282 | these instructions are present (currently, there are no such | |
1283 | architectures); they are disabled if an architecture is specified with | |
1284 | @option{-march} on which the instructions are optional or not | |
1285 | present. This option overrides such a default from the architecture, | |
1286 | independent of the order in which the @option{-march} or | |
1287 | @option{-matomic} or @option{-mno-atomic} options are passed. | |
1288 | ||
1289 | @item -mbig-endian | |
1290 | @itemx -mlittle-endian | |
1291 | Generate code for the specified endianness. The default is | |
1292 | little-endian. | |
1293 | @end table | |
1294 | ||
1295 | @end ifset | |
1296 | ||
e0001a05 NC |
1297 | @ifset XTENSA |
1298 | The following options are available when @value{AS} is configured for | |
1299 | an Xtensa processor. | |
1300 | ||
1301 | @table @gcctabopt | |
e0001a05 NC |
1302 | @item --text-section-literals | --no-text-section-literals |
1303 | With @option{--text-@-section-@-literals}, literal pools are interspersed | |
1304 | in the text section. The default is | |
1305 | @option{--no-@-text-@-section-@-literals}, which places literals in a | |
43cd72b9 BW |
1306 | separate section in the output file. These options only affect literals |
1307 | referenced via PC-relative @code{L32R} instructions; literals for | |
1308 | absolute mode @code{L32R} instructions are handled separately. | |
1309 | ||
1310 | @item --absolute-literals | --no-absolute-literals | |
1311 | Indicate to the assembler whether @code{L32R} instructions use absolute | |
1312 | or PC-relative addressing. The default is to assume absolute addressing | |
1313 | if the Xtensa processor includes the absolute @code{L32R} addressing | |
1314 | option. Otherwise, only the PC-relative @code{L32R} mode can be used. | |
e0001a05 NC |
1315 | |
1316 | @item --target-align | --no-target-align | |
1317 | Enable or disable automatic alignment to reduce branch penalties at the | |
1318 | expense of some code density. The default is @option{--target-@-align}. | |
1319 | ||
1320 | @item --longcalls | --no-longcalls | |
1321 | Enable or disable transformation of call instructions to allow calls | |
1322 | across a greater range of addresses. The default is | |
1323 | @option{--no-@-longcalls}. | |
43cd72b9 BW |
1324 | |
1325 | @item --transform | --no-transform | |
1326 | Enable or disable all assembler transformations of Xtensa instructions. | |
1327 | The default is @option{--transform}; | |
1328 | @option{--no-transform} should be used only in the rare cases when the | |
1329 | instructions must be exactly as specified in the assembly source. | |
00e3c476 BW |
1330 | |
1331 | @item --rename-section @var{oldname}=@var{newname} | |
1332 | When generating output sections, rename the @var{oldname} section to | |
1333 | @var{newname}. | |
e0001a05 NC |
1334 | @end table |
1335 | @end ifset | |
1336 | ||
3c9b82ba NC |
1337 | @ifset Z80 |
1338 | The following options are available when @value{AS} is configured for | |
1339 | a Z80 family processor. | |
1340 | @table @gcctabopt | |
1341 | @item -z80 | |
1342 | Assemble for Z80 processor. | |
1343 | @item -r800 | |
1344 | Assemble for R800 processor. | |
01642c12 | 1345 | @item -ignore-undocumented-instructions |
3c9b82ba NC |
1346 | @itemx -Wnud |
1347 | Assemble undocumented Z80 instructions that also work on R800 without warning. | |
01642c12 | 1348 | @item -ignore-unportable-instructions |
3c9b82ba NC |
1349 | @itemx -Wnup |
1350 | Assemble all undocumented Z80 instructions without warning. | |
01642c12 | 1351 | @item -warn-undocumented-instructions |
3c9b82ba NC |
1352 | @itemx -Wud |
1353 | Issue a warning for undocumented Z80 instructions that also work on R800. | |
01642c12 | 1354 | @item -warn-unportable-instructions |
3c9b82ba | 1355 | @itemx -Wup |
01642c12 RM |
1356 | Issue a warning for undocumented Z80 instructions that do not work on R800. |
1357 | @item -forbid-undocumented-instructions | |
3c9b82ba NC |
1358 | @itemx -Fud |
1359 | Treat all undocumented instructions as errors. | |
01642c12 | 1360 | @item -forbid-unportable-instructions |
3c9b82ba | 1361 | @itemx -Fup |
b45619c0 | 1362 | Treat undocumented Z80 instructions that do not work on R800 as errors. |
3c9b82ba NC |
1363 | @end table |
1364 | @end ifset | |
1365 | ||
0285c67d NC |
1366 | @c man end |
1367 | ||
252b5132 RH |
1368 | @menu |
1369 | * Manual:: Structure of this Manual | |
1370 | * GNU Assembler:: The GNU Assembler | |
1371 | * Object Formats:: Object File Formats | |
1372 | * Command Line:: Command Line | |
1373 | * Input Files:: Input Files | |
1374 | * Object:: Output (Object) File | |
1375 | * Errors:: Error and Warning Messages | |
1376 | @end menu | |
1377 | ||
1378 | @node Manual | |
1379 | @section Structure of this Manual | |
1380 | ||
1381 | @cindex manual, structure and purpose | |
1382 | This manual is intended to describe what you need to know to use | |
a4fb0134 | 1383 | @sc{gnu} @command{@value{AS}}. We cover the syntax expected in source files, including |
252b5132 | 1384 | notation for symbols, constants, and expressions; the directives that |
a4fb0134 | 1385 | @command{@value{AS}} understands; and of course how to invoke @command{@value{AS}}. |
252b5132 RH |
1386 | |
1387 | @ifclear GENERIC | |
1388 | We also cover special features in the @value{TARGET} | |
a4fb0134 | 1389 | configuration of @command{@value{AS}}, including assembler directives. |
252b5132 RH |
1390 | @end ifclear |
1391 | @ifset GENERIC | |
1392 | This manual also describes some of the machine-dependent features of | |
1393 | various flavors of the assembler. | |
1394 | @end ifset | |
1395 | ||
1396 | @cindex machine instructions (not covered) | |
1397 | On the other hand, this manual is @emph{not} intended as an introduction | |
1398 | to programming in assembly language---let alone programming in general! | |
1399 | In a similar vein, we make no attempt to introduce the machine | |
1400 | architecture; we do @emph{not} describe the instruction set, standard | |
1401 | mnemonics, registers or addressing modes that are standard to a | |
1402 | particular architecture. | |
1403 | @ifset GENERIC | |
1404 | You may want to consult the manufacturer's | |
1405 | machine architecture manual for this information. | |
1406 | @end ifset | |
1407 | @ifclear GENERIC | |
1408 | @ifset H8/300 | |
1409 | For information on the H8/300 machine instruction set, see @cite{H8/300 | |
c2dcd04e NC |
1410 | Series Programming Manual}. For the H8/300H, see @cite{H8/300H Series |
1411 | Programming Manual} (Renesas). | |
252b5132 | 1412 | @end ifset |
252b5132 | 1413 | @ifset SH |
ef230218 JR |
1414 | For information on the Renesas (formerly Hitachi) / SuperH SH machine instruction set, |
1415 | see @cite{SH-Microcomputer User's Manual} (Renesas) or | |
1416 | @cite{SH-4 32-bit CPU Core Architecture} (SuperH) and | |
1417 | @cite{SuperH (SH) 64-Bit RISC Series} (SuperH). | |
252b5132 RH |
1418 | @end ifset |
1419 | @ifset Z8000 | |
1420 | For information on the Z8000 machine instruction set, see @cite{Z8000 CPU Technical Manual} | |
1421 | @end ifset | |
1422 | @end ifclear | |
1423 | ||
1424 | @c I think this is premature---doc@cygnus.com, 17jan1991 | |
1425 | @ignore | |
1426 | Throughout this manual, we assume that you are running @dfn{GNU}, | |
1427 | the portable operating system from the @dfn{Free Software | |
1428 | Foundation, Inc.}. This restricts our attention to certain kinds of | |
1429 | computer (in particular, the kinds of computers that @sc{gnu} can run on); | |
1430 | once this assumption is granted examples and definitions need less | |
1431 | qualification. | |
1432 | ||
a4fb0134 | 1433 | @command{@value{AS}} is part of a team of programs that turn a high-level |
252b5132 RH |
1434 | human-readable series of instructions into a low-level |
1435 | computer-readable series of instructions. Different versions of | |
a4fb0134 | 1436 | @command{@value{AS}} are used for different kinds of computer. |
252b5132 RH |
1437 | @end ignore |
1438 | ||
1439 | @c There used to be a section "Terminology" here, which defined | |
1440 | @c "contents", "byte", "word", and "long". Defining "word" to any | |
1441 | @c particular size is confusing when the .word directive may generate 16 | |
1442 | @c bits on one machine and 32 bits on another; in general, for the user | |
1443 | @c version of this manual, none of these terms seem essential to define. | |
1444 | @c They were used very little even in the former draft of the manual; | |
1445 | @c this draft makes an effort to avoid them (except in names of | |
1446 | @c directives). | |
1447 | ||
1448 | @node GNU Assembler | |
1449 | @section The GNU Assembler | |
1450 | ||
0285c67d NC |
1451 | @c man begin DESCRIPTION |
1452 | ||
a4fb0134 | 1453 | @sc{gnu} @command{as} is really a family of assemblers. |
252b5132 | 1454 | @ifclear GENERIC |
a4fb0134 | 1455 | This manual describes @command{@value{AS}}, a member of that family which is |
252b5132 RH |
1456 | configured for the @value{TARGET} architectures. |
1457 | @end ifclear | |
1458 | If you use (or have used) the @sc{gnu} assembler on one architecture, you | |
1459 | should find a fairly similar environment when you use it on another | |
1460 | architecture. Each version has much in common with the others, | |
1461 | including object file formats, most assembler directives (often called | |
1462 | @dfn{pseudo-ops}) and assembler syntax.@refill | |
1463 | ||
1464 | @cindex purpose of @sc{gnu} assembler | |
a4fb0134 | 1465 | @command{@value{AS}} is primarily intended to assemble the output of the |
252b5132 | 1466 | @sc{gnu} C compiler @code{@value{GCC}} for use by the linker |
a4fb0134 | 1467 | @code{@value{LD}}. Nevertheless, we've tried to make @command{@value{AS}} |
252b5132 RH |
1468 | assemble correctly everything that other assemblers for the same |
1469 | machine would assemble. | |
1470 | @ifset VAX | |
1471 | Any exceptions are documented explicitly (@pxref{Machine Dependencies}). | |
1472 | @end ifset | |
1473 | @ifset M680X0 | |
1474 | @c This remark should appear in generic version of manual; assumption | |
1475 | @c here is that generic version sets M680x0. | |
a4fb0134 | 1476 | This doesn't mean @command{@value{AS}} always uses the same syntax as another |
252b5132 RH |
1477 | assembler for the same architecture; for example, we know of several |
1478 | incompatible versions of 680x0 assembly language syntax. | |
1479 | @end ifset | |
1480 | ||
0285c67d NC |
1481 | @c man end |
1482 | ||
a4fb0134 | 1483 | Unlike older assemblers, @command{@value{AS}} is designed to assemble a source |
252b5132 RH |
1484 | program in one pass of the source file. This has a subtle impact on the |
1485 | @kbd{.org} directive (@pxref{Org,,@code{.org}}). | |
1486 | ||
1487 | @node Object Formats | |
1488 | @section Object File Formats | |
1489 | ||
1490 | @cindex object file format | |
1491 | The @sc{gnu} assembler can be configured to produce several alternative | |
1492 | object file formats. For the most part, this does not affect how you | |
1493 | write assembly language programs; but directives for debugging symbols | |
1494 | are typically different in different file formats. @xref{Symbol | |
1495 | Attributes,,Symbol Attributes}. | |
1496 | @ifclear GENERIC | |
1497 | @ifclear MULTI-OBJ | |
c1253627 | 1498 | For the @value{TARGET} target, @command{@value{AS}} is configured to produce |
252b5132 RH |
1499 | @value{OBJ-NAME} format object files. |
1500 | @end ifclear | |
1501 | @c The following should exhaust all configs that set MULTI-OBJ, ideally | |
252b5132 | 1502 | @ifset I960 |
a4fb0134 | 1503 | On the @value{TARGET}, @command{@value{AS}} can be configured to produce either |
252b5132 RH |
1504 | @code{b.out} or COFF format object files. |
1505 | @end ifset | |
1506 | @ifset HPPA | |
a4fb0134 | 1507 | On the @value{TARGET}, @command{@value{AS}} can be configured to produce either |
252b5132 RH |
1508 | SOM or ELF format object files. |
1509 | @end ifset | |
1510 | @end ifclear | |
1511 | ||
1512 | @node Command Line | |
1513 | @section Command Line | |
1514 | ||
1515 | @cindex command line conventions | |
0285c67d | 1516 | |
a4fb0134 | 1517 | After the program name @command{@value{AS}}, the command line may contain |
252b5132 RH |
1518 | options and file names. Options may appear in any order, and may be |
1519 | before, after, or between file names. The order of file names is | |
1520 | significant. | |
1521 | ||
1522 | @cindex standard input, as input file | |
1523 | @kindex -- | |
1524 | @file{--} (two hyphens) by itself names the standard input file | |
a4fb0134 | 1525 | explicitly, as one of the files for @command{@value{AS}} to assemble. |
252b5132 RH |
1526 | |
1527 | @cindex options, command line | |
1528 | Except for @samp{--} any command line argument that begins with a | |
1529 | hyphen (@samp{-}) is an option. Each option changes the behavior of | |
a4fb0134 | 1530 | @command{@value{AS}}. No option changes the way another option works. An |
252b5132 RH |
1531 | option is a @samp{-} followed by one or more letters; the case of |
1532 | the letter is important. All options are optional. | |
1533 | ||
1534 | Some options expect exactly one file name to follow them. The file | |
1535 | name may either immediately follow the option's letter (compatible | |
1536 | with older assemblers) or it may be the next command argument (@sc{gnu} | |
1537 | standard). These two command lines are equivalent: | |
1538 | ||
1539 | @smallexample | |
1540 | @value{AS} -o my-object-file.o mumble.s | |
1541 | @value{AS} -omy-object-file.o mumble.s | |
1542 | @end smallexample | |
1543 | ||
1544 | @node Input Files | |
1545 | @section Input Files | |
1546 | ||
1547 | @cindex input | |
1548 | @cindex source program | |
1549 | @cindex files, input | |
1550 | We use the phrase @dfn{source program}, abbreviated @dfn{source}, to | |
a4fb0134 | 1551 | describe the program input to one run of @command{@value{AS}}. The program may |
252b5132 RH |
1552 | be in one or more files; how the source is partitioned into files |
1553 | doesn't change the meaning of the source. | |
1554 | ||
1555 | @c I added "con" prefix to "catenation" just to prove I can overcome my | |
1556 | @c APL training... doc@cygnus.com | |
1557 | The source program is a concatenation of the text in all the files, in the | |
1558 | order specified. | |
1559 | ||
0285c67d | 1560 | @c man begin DESCRIPTION |
a4fb0134 | 1561 | Each time you run @command{@value{AS}} it assembles exactly one source |
252b5132 RH |
1562 | program. The source program is made up of one or more files. |
1563 | (The standard input is also a file.) | |
1564 | ||
a4fb0134 | 1565 | You give @command{@value{AS}} a command line that has zero or more input file |
252b5132 RH |
1566 | names. The input files are read (from left file name to right). A |
1567 | command line argument (in any position) that has no special meaning | |
1568 | is taken to be an input file name. | |
1569 | ||
a4fb0134 SC |
1570 | If you give @command{@value{AS}} no file names it attempts to read one input file |
1571 | from the @command{@value{AS}} standard input, which is normally your terminal. You | |
1572 | may have to type @key{ctl-D} to tell @command{@value{AS}} there is no more program | |
252b5132 RH |
1573 | to assemble. |
1574 | ||
1575 | Use @samp{--} if you need to explicitly name the standard input file | |
1576 | in your command line. | |
1577 | ||
a4fb0134 | 1578 | If the source is empty, @command{@value{AS}} produces a small, empty object |
252b5132 RH |
1579 | file. |
1580 | ||
0285c67d NC |
1581 | @c man end |
1582 | ||
252b5132 RH |
1583 | @subheading Filenames and Line-numbers |
1584 | ||
1585 | @cindex input file linenumbers | |
1586 | @cindex line numbers, in input files | |
1587 | There are two ways of locating a line in the input file (or files) and | |
1588 | either may be used in reporting error messages. One way refers to a line | |
1589 | number in a physical file; the other refers to a line number in a | |
1590 | ``logical'' file. @xref{Errors, ,Error and Warning Messages}. | |
1591 | ||
1592 | @dfn{Physical files} are those files named in the command line given | |
a4fb0134 | 1593 | to @command{@value{AS}}. |
252b5132 RH |
1594 | |
1595 | @dfn{Logical files} are simply names declared explicitly by assembler | |
1596 | directives; they bear no relation to physical files. Logical file names help | |
a4fb0134 SC |
1597 | error messages reflect the original source file, when @command{@value{AS}} source |
1598 | is itself synthesized from other files. @command{@value{AS}} understands the | |
252b5132 RH |
1599 | @samp{#} directives emitted by the @code{@value{GCC}} preprocessor. See also |
1600 | @ref{File,,@code{.file}}. | |
1601 | ||
1602 | @node Object | |
1603 | @section Output (Object) File | |
1604 | ||
1605 | @cindex object file | |
1606 | @cindex output file | |
1607 | @kindex a.out | |
1608 | @kindex .o | |
a4fb0134 | 1609 | Every time you run @command{@value{AS}} it produces an output file, which is |
252b5132 RH |
1610 | your assembly language program translated into numbers. This file |
1611 | is the object file. Its default name is | |
1612 | @ifclear BOUT | |
1613 | @code{a.out}. | |
1614 | @end ifclear | |
1615 | @ifset BOUT | |
1616 | @ifset GENERIC | |
01642c12 | 1617 | @code{a.out}, or |
252b5132 | 1618 | @end ifset |
a4fb0134 | 1619 | @code{b.out} when @command{@value{AS}} is configured for the Intel 80960. |
252b5132 | 1620 | @end ifset |
a4fb0134 | 1621 | You can give it another name by using the @option{-o} option. Conventionally, |
252b5132 RH |
1622 | object file names end with @file{.o}. The default name is used for historical |
1623 | reasons: older assemblers were capable of assembling self-contained programs | |
1624 | directly into a runnable program. (For some formats, this isn't currently | |
1625 | possible, but it can be done for the @code{a.out} format.) | |
1626 | ||
1627 | @cindex linker | |
1628 | @kindex ld | |
1629 | The object file is meant for input to the linker @code{@value{LD}}. It contains | |
1630 | assembled program code, information to help @code{@value{LD}} integrate | |
1631 | the assembled program into a runnable file, and (optionally) symbolic | |
1632 | information for the debugger. | |
1633 | ||
1634 | @c link above to some info file(s) like the description of a.out. | |
1635 | @c don't forget to describe @sc{gnu} info as well as Unix lossage. | |
1636 | ||
1637 | @node Errors | |
1638 | @section Error and Warning Messages | |
1639 | ||
0285c67d NC |
1640 | @c man begin DESCRIPTION |
1641 | ||
a349d9dd | 1642 | @cindex error messages |
252b5132 RH |
1643 | @cindex warning messages |
1644 | @cindex messages from assembler | |
a4fb0134 | 1645 | @command{@value{AS}} may write warnings and error messages to the standard error |
252b5132 | 1646 | file (usually your terminal). This should not happen when a compiler |
a4fb0134 SC |
1647 | runs @command{@value{AS}} automatically. Warnings report an assumption made so |
1648 | that @command{@value{AS}} could keep assembling a flawed program; errors report a | |
252b5132 RH |
1649 | grave problem that stops the assembly. |
1650 | ||
0285c67d NC |
1651 | @c man end |
1652 | ||
252b5132 RH |
1653 | @cindex format of warning messages |
1654 | Warning messages have the format | |
1655 | ||
1656 | @smallexample | |
1657 | file_name:@b{NNN}:Warning Message Text | |
1658 | @end smallexample | |
1659 | ||
1660 | @noindent | |
1661 | @cindex line numbers, in warnings/errors | |
1662 | (where @b{NNN} is a line number). If a logical file name has been given | |
1663 | (@pxref{File,,@code{.file}}) it is used for the filename, otherwise the name of | |
1664 | the current input file is used. If a logical line number was given | |
1665 | @ifset GENERIC | |
1666 | (@pxref{Line,,@code{.line}}) | |
1667 | @end ifset | |
252b5132 RH |
1668 | then it is used to calculate the number printed, |
1669 | otherwise the actual line in the current source file is printed. The | |
1670 | message text is intended to be self explanatory (in the grand Unix | |
1671 | tradition). | |
1672 | ||
1673 | @cindex format of error messages | |
1674 | Error messages have the format | |
1675 | @smallexample | |
1676 | file_name:@b{NNN}:FATAL:Error Message Text | |
1677 | @end smallexample | |
1678 | The file name and line number are derived as for warning | |
1679 | messages. The actual message text may be rather less explanatory | |
1680 | because many of them aren't supposed to happen. | |
1681 | ||
1682 | @node Invoking | |
1683 | @chapter Command-Line Options | |
1684 | ||
1685 | @cindex options, all versions of assembler | |
1686 | This chapter describes command-line options available in @emph{all} | |
96e9638b BW |
1687 | versions of the @sc{gnu} assembler; see @ref{Machine Dependencies}, |
1688 | for options specific | |
252b5132 | 1689 | @ifclear GENERIC |
c1253627 | 1690 | to the @value{TARGET} target. |
252b5132 RH |
1691 | @end ifclear |
1692 | @ifset GENERIC | |
1693 | to particular machine architectures. | |
1694 | @end ifset | |
1695 | ||
0285c67d NC |
1696 | @c man begin DESCRIPTION |
1697 | ||
c1253627 | 1698 | If you are invoking @command{@value{AS}} via the @sc{gnu} C compiler, |
252b5132 RH |
1699 | you can use the @samp{-Wa} option to pass arguments through to the assembler. |
1700 | The assembler arguments must be separated from each other (and the @samp{-Wa}) | |
1701 | by commas. For example: | |
1702 | ||
1703 | @smallexample | |
1704 | gcc -c -g -O -Wa,-alh,-L file.c | |
1705 | @end smallexample | |
1706 | ||
1707 | @noindent | |
1708 | This passes two options to the assembler: @samp{-alh} (emit a listing to | |
5f5e16be | 1709 | standard output with high-level and assembly source) and @samp{-L} (retain |
252b5132 RH |
1710 | local symbols in the symbol table). |
1711 | ||
1712 | Usually you do not need to use this @samp{-Wa} mechanism, since many compiler | |
1713 | command-line options are automatically passed to the assembler by the compiler. | |
1714 | (You can call the @sc{gnu} compiler driver with the @samp{-v} option to see | |
1715 | precisely what options it passes to each compilation pass, including the | |
1716 | assembler.) | |
1717 | ||
0285c67d NC |
1718 | @c man end |
1719 | ||
252b5132 | 1720 | @menu |
83f10cb2 | 1721 | * a:: -a[cdghlns] enable listings |
caa32fe5 | 1722 | * alternate:: --alternate enable alternate macro syntax |
252b5132 RH |
1723 | * D:: -D for compatibility |
1724 | * f:: -f to work faster | |
1725 | * I:: -I for .include search path | |
1726 | @ifclear DIFF-TBL-KLUGE | |
1727 | * K:: -K for compatibility | |
1728 | @end ifclear | |
1729 | @ifset DIFF-TBL-KLUGE | |
1730 | * K:: -K for difference tables | |
1731 | @end ifset | |
1732 | ||
ba83aca1 | 1733 | * L:: -L to retain local symbols |
c3a27914 | 1734 | * listing:: --listing-XXX to configure listing output |
252b5132 RH |
1735 | * M:: -M or --mri to assemble in MRI compatibility mode |
1736 | * MD:: --MD for dependency tracking | |
1737 | * o:: -o to name the object file | |
1738 | * R:: -R to join data and text sections | |
1739 | * statistics:: --statistics to see statistics about assembly | |
1740 | * traditional-format:: --traditional-format for compatible output | |
1741 | * v:: -v to announce version | |
2bdd6cf5 | 1742 | * W:: -W, --no-warn, --warn, --fatal-warnings to control warnings |
252b5132 RH |
1743 | * Z:: -Z to make object file even after errors |
1744 | @end menu | |
1745 | ||
1746 | @node a | |
83f10cb2 | 1747 | @section Enable Listings: @option{-a[cdghlns]} |
252b5132 RH |
1748 | |
1749 | @kindex -a | |
1750 | @kindex -ac | |
1751 | @kindex -ad | |
83f10cb2 | 1752 | @kindex -ag |
252b5132 RH |
1753 | @kindex -ah |
1754 | @kindex -al | |
1755 | @kindex -an | |
1756 | @kindex -as | |
1757 | @cindex listings, enabling | |
1758 | @cindex assembly listings, enabling | |
1759 | ||
1760 | These options enable listing output from the assembler. By itself, | |
1761 | @samp{-a} requests high-level, assembly, and symbols listing. | |
1762 | You can use other letters to select specific options for the list: | |
1763 | @samp{-ah} requests a high-level language listing, | |
1764 | @samp{-al} requests an output-program assembly listing, and | |
1765 | @samp{-as} requests a symbol table listing. | |
1766 | High-level listings require that a compiler debugging option like | |
1767 | @samp{-g} be used, and that assembly listings (@samp{-al}) be requested | |
1768 | also. | |
1769 | ||
83f10cb2 NC |
1770 | Use the @samp{-ag} option to print a first section with general assembly |
1771 | information, like @value{AS} version, switches passed, or time stamp. | |
1772 | ||
252b5132 RH |
1773 | Use the @samp{-ac} option to omit false conditionals from a listing. Any lines |
1774 | which are not assembled because of a false @code{.if} (or @code{.ifdef}, or any | |
1775 | other conditional), or a true @code{.if} followed by an @code{.else}, will be | |
1776 | omitted from the listing. | |
1777 | ||
1778 | Use the @samp{-ad} option to omit debugging directives from the | |
1779 | listing. | |
1780 | ||
1781 | Once you have specified one of these options, you can further control | |
1782 | listing output and its appearance using the directives @code{.list}, | |
1783 | @code{.nolist}, @code{.psize}, @code{.eject}, @code{.title}, and | |
1784 | @code{.sbttl}. | |
1785 | The @samp{-an} option turns off all forms processing. | |
1786 | If you do not request listing output with one of the @samp{-a} options, the | |
1787 | listing-control directives have no effect. | |
1788 | ||
1789 | The letters after @samp{-a} may be combined into one option, | |
1790 | @emph{e.g.}, @samp{-aln}. | |
1791 | ||
96e9638b BW |
1792 | Note if the assembler source is coming from the standard input (e.g., |
1793 | because it | |
c3a27914 NC |
1794 | is being created by @code{@value{GCC}} and the @samp{-pipe} command line switch |
1795 | is being used) then the listing will not contain any comments or preprocessor | |
1796 | directives. This is because the listing code buffers input source lines from | |
1797 | stdin only after they have been preprocessed by the assembler. This reduces | |
1798 | memory usage and makes the code more efficient. | |
1799 | ||
caa32fe5 NC |
1800 | @node alternate |
1801 | @section @option{--alternate} | |
1802 | ||
1803 | @kindex --alternate | |
1804 | Begin in alternate macro mode, see @ref{Altmacro,,@code{.altmacro}}. | |
1805 | ||
252b5132 | 1806 | @node D |
a4fb0134 | 1807 | @section @option{-D} |
252b5132 RH |
1808 | |
1809 | @kindex -D | |
1810 | This option has no effect whatsoever, but it is accepted to make it more | |
1811 | likely that scripts written for other assemblers also work with | |
a4fb0134 | 1812 | @command{@value{AS}}. |
252b5132 RH |
1813 | |
1814 | @node f | |
a4fb0134 | 1815 | @section Work Faster: @option{-f} |
252b5132 RH |
1816 | |
1817 | @kindex -f | |
1818 | @cindex trusted compiler | |
a4fb0134 | 1819 | @cindex faster processing (@option{-f}) |
252b5132 RH |
1820 | @samp{-f} should only be used when assembling programs written by a |
1821 | (trusted) compiler. @samp{-f} stops the assembler from doing whitespace | |
1822 | and comment preprocessing on | |
1823 | the input file(s) before assembling them. @xref{Preprocessing, | |
1824 | ,Preprocessing}. | |
1825 | ||
1826 | @quotation | |
1827 | @emph{Warning:} if you use @samp{-f} when the files actually need to be | |
a4fb0134 | 1828 | preprocessed (if they contain comments, for example), @command{@value{AS}} does |
252b5132 RH |
1829 | not work correctly. |
1830 | @end quotation | |
1831 | ||
1832 | @node I | |
c1253627 | 1833 | @section @code{.include} Search Path: @option{-I} @var{path} |
252b5132 RH |
1834 | |
1835 | @kindex -I @var{path} | |
1836 | @cindex paths for @code{.include} | |
1837 | @cindex search path for @code{.include} | |
1838 | @cindex @code{include} directive search path | |
1839 | Use this option to add a @var{path} to the list of directories | |
a4fb0134 SC |
1840 | @command{@value{AS}} searches for files specified in @code{.include} |
1841 | directives (@pxref{Include,,@code{.include}}). You may use @option{-I} as | |
252b5132 | 1842 | many times as necessary to include a variety of paths. The current |
a4fb0134 | 1843 | working directory is always searched first; after that, @command{@value{AS}} |
252b5132 RH |
1844 | searches any @samp{-I} directories in the same order as they were |
1845 | specified (left to right) on the command line. | |
1846 | ||
1847 | @node K | |
a4fb0134 | 1848 | @section Difference Tables: @option{-K} |
252b5132 RH |
1849 | |
1850 | @kindex -K | |
1851 | @ifclear DIFF-TBL-KLUGE | |
1852 | On the @value{TARGET} family, this option is allowed, but has no effect. It is | |
1853 | permitted for compatibility with the @sc{gnu} assembler on other platforms, | |
1854 | where it can be used to warn when the assembler alters the machine code | |
1855 | generated for @samp{.word} directives in difference tables. The @value{TARGET} | |
1856 | family does not have the addressing limitations that sometimes lead to this | |
1857 | alteration on other platforms. | |
1858 | @end ifclear | |
1859 | ||
1860 | @ifset DIFF-TBL-KLUGE | |
1861 | @cindex difference tables, warning | |
1862 | @cindex warning for altered difference tables | |
96e9638b BW |
1863 | @command{@value{AS}} sometimes alters the code emitted for directives of the |
1864 | form @samp{.word @var{sym1}-@var{sym2}}. @xref{Word,,@code{.word}}. | |
252b5132 RH |
1865 | You can use the @samp{-K} option if you want a warning issued when this |
1866 | is done. | |
1867 | @end ifset | |
1868 | ||
1869 | @node L | |
ba83aca1 | 1870 | @section Include Local Symbols: @option{-L} |
252b5132 RH |
1871 | |
1872 | @kindex -L | |
ba83aca1 BW |
1873 | @cindex local symbols, retaining in output |
1874 | Symbols beginning with system-specific local label prefixes, typically | |
1875 | @samp{.L} for ELF systems or @samp{L} for traditional a.out systems, are | |
1876 | called @dfn{local symbols}. @xref{Symbol Names}. Normally you do not see | |
1877 | such symbols when debugging, because they are intended for the use of | |
1878 | programs (like compilers) that compose assembler programs, not for your | |
1879 | notice. Normally both @command{@value{AS}} and @code{@value{LD}} discard | |
1880 | such symbols, so you do not normally debug with them. | |
1881 | ||
1882 | This option tells @command{@value{AS}} to retain those local symbols | |
252b5132 | 1883 | in the object file. Usually if you do this you also tell the linker |
ba83aca1 | 1884 | @code{@value{LD}} to preserve those symbols. |
252b5132 | 1885 | |
c3a27914 | 1886 | @node listing |
a4fb0134 | 1887 | @section Configuring listing output: @option{--listing} |
c3a27914 NC |
1888 | |
1889 | The listing feature of the assembler can be enabled via the command line switch | |
1890 | @samp{-a} (@pxref{a}). This feature combines the input source file(s) with a | |
1891 | hex dump of the corresponding locations in the output object file, and displays | |
96e9638b BW |
1892 | them as a listing file. The format of this listing can be controlled by |
1893 | directives inside the assembler source (i.e., @code{.list} (@pxref{List}), | |
1894 | @code{.title} (@pxref{Title}), @code{.sbttl} (@pxref{Sbttl}), | |
1895 | @code{.psize} (@pxref{Psize}), and | |
1896 | @code{.eject} (@pxref{Eject}) and also by the following switches: | |
c3a27914 | 1897 | |
a4fb0134 | 1898 | @table @gcctabopt |
c3a27914 NC |
1899 | @item --listing-lhs-width=@samp{number} |
1900 | @kindex --listing-lhs-width | |
1901 | @cindex Width of first line disassembly output | |
1902 | Sets the maximum width, in words, of the first line of the hex byte dump. This | |
1903 | dump appears on the left hand side of the listing output. | |
1904 | ||
1905 | @item --listing-lhs-width2=@samp{number} | |
1906 | @kindex --listing-lhs-width2 | |
1907 | @cindex Width of continuation lines of disassembly output | |
1908 | Sets the maximum width, in words, of any further lines of the hex byte dump for | |
8dfa0188 | 1909 | a given input source line. If this value is not specified, it defaults to being |
c3a27914 NC |
1910 | the same as the value specified for @samp{--listing-lhs-width}. If neither |
1911 | switch is used the default is to one. | |
1912 | ||
1913 | @item --listing-rhs-width=@samp{number} | |
1914 | @kindex --listing-rhs-width | |
1915 | @cindex Width of source line output | |
1916 | Sets the maximum width, in characters, of the source line that is displayed | |
1917 | alongside the hex dump. The default value for this parameter is 100. The | |
1918 | source line is displayed on the right hand side of the listing output. | |
1919 | ||
1920 | @item --listing-cont-lines=@samp{number} | |
1921 | @kindex --listing-cont-lines | |
1922 | @cindex Maximum number of continuation lines | |
1923 | Sets the maximum number of continuation lines of hex dump that will be | |
1924 | displayed for a given single line of source input. The default value is 4. | |
1925 | @end table | |
1926 | ||
252b5132 | 1927 | @node M |
a4fb0134 | 1928 | @section Assemble in MRI Compatibility Mode: @option{-M} |
252b5132 RH |
1929 | |
1930 | @kindex -M | |
1931 | @cindex MRI compatibility mode | |
a4fb0134 SC |
1932 | The @option{-M} or @option{--mri} option selects MRI compatibility mode. This |
1933 | changes the syntax and pseudo-op handling of @command{@value{AS}} to make it | |
252b5132 RH |
1934 | compatible with the @code{ASM68K} or the @code{ASM960} (depending upon the |
1935 | configured target) assembler from Microtec Research. The exact nature of the | |
1936 | MRI syntax will not be documented here; see the MRI manuals for more | |
1937 | information. Note in particular that the handling of macros and macro | |
1938 | arguments is somewhat different. The purpose of this option is to permit | |
a4fb0134 | 1939 | assembling existing MRI assembler code using @command{@value{AS}}. |
252b5132 RH |
1940 | |
1941 | The MRI compatibility is not complete. Certain operations of the MRI assembler | |
1942 | depend upon its object file format, and can not be supported using other object | |
1943 | file formats. Supporting these would require enhancing each object file format | |
1944 | individually. These are: | |
1945 | ||
1946 | @itemize @bullet | |
1947 | @item global symbols in common section | |
1948 | ||
1949 | The m68k MRI assembler supports common sections which are merged by the linker. | |
a4fb0134 | 1950 | Other object file formats do not support this. @command{@value{AS}} handles |
252b5132 RH |
1951 | common sections by treating them as a single common symbol. It permits local |
1952 | symbols to be defined within a common section, but it can not support global | |
1953 | symbols, since it has no way to describe them. | |
1954 | ||
1955 | @item complex relocations | |
1956 | ||
1957 | The MRI assemblers support relocations against a negated section address, and | |
1958 | relocations which combine the start addresses of two or more sections. These | |
1959 | are not support by other object file formats. | |
1960 | ||
1961 | @item @code{END} pseudo-op specifying start address | |
1962 | ||
1963 | The MRI @code{END} pseudo-op permits the specification of a start address. | |
1964 | This is not supported by other object file formats. The start address may | |
a4fb0134 | 1965 | instead be specified using the @option{-e} option to the linker, or in a linker |
252b5132 RH |
1966 | script. |
1967 | ||
1968 | @item @code{IDNT}, @code{.ident} and @code{NAME} pseudo-ops | |
1969 | ||
1970 | The MRI @code{IDNT}, @code{.ident} and @code{NAME} pseudo-ops assign a module | |
1971 | name to the output file. This is not supported by other object file formats. | |
1972 | ||
1973 | @item @code{ORG} pseudo-op | |
1974 | ||
1975 | The m68k MRI @code{ORG} pseudo-op begins an absolute section at a given | |
a4fb0134 | 1976 | address. This differs from the usual @command{@value{AS}} @code{.org} pseudo-op, |
252b5132 RH |
1977 | which changes the location within the current section. Absolute sections are |
1978 | not supported by other object file formats. The address of a section may be | |
1979 | assigned within a linker script. | |
1980 | @end itemize | |
1981 | ||
1982 | There are some other features of the MRI assembler which are not supported by | |
a4fb0134 | 1983 | @command{@value{AS}}, typically either because they are difficult or because they |
252b5132 RH |
1984 | seem of little consequence. Some of these may be supported in future releases. |
1985 | ||
1986 | @itemize @bullet | |
1987 | ||
1988 | @item EBCDIC strings | |
1989 | ||
1990 | EBCDIC strings are not supported. | |
1991 | ||
1992 | @item packed binary coded decimal | |
1993 | ||
1994 | Packed binary coded decimal is not supported. This means that the @code{DC.P} | |
1995 | and @code{DCB.P} pseudo-ops are not supported. | |
1996 | ||
1997 | @item @code{FEQU} pseudo-op | |
1998 | ||
1999 | The m68k @code{FEQU} pseudo-op is not supported. | |
2000 | ||
2001 | @item @code{NOOBJ} pseudo-op | |
2002 | ||
2003 | The m68k @code{NOOBJ} pseudo-op is not supported. | |
2004 | ||
2005 | @item @code{OPT} branch control options | |
2006 | ||
2007 | The m68k @code{OPT} branch control options---@code{B}, @code{BRS}, @code{BRB}, | |
a4fb0134 | 2008 | @code{BRL}, and @code{BRW}---are ignored. @command{@value{AS}} automatically |
252b5132 RH |
2009 | relaxes all branches, whether forward or backward, to an appropriate size, so |
2010 | these options serve no purpose. | |
2011 | ||
2012 | @item @code{OPT} list control options | |
2013 | ||
2014 | The following m68k @code{OPT} list control options are ignored: @code{C}, | |
2015 | @code{CEX}, @code{CL}, @code{CRE}, @code{E}, @code{G}, @code{I}, @code{M}, | |
2016 | @code{MEX}, @code{MC}, @code{MD}, @code{X}. | |
2017 | ||
2018 | @item other @code{OPT} options | |
2019 | ||
2020 | The following m68k @code{OPT} options are ignored: @code{NEST}, @code{O}, | |
2021 | @code{OLD}, @code{OP}, @code{P}, @code{PCO}, @code{PCR}, @code{PCS}, @code{R}. | |
2022 | ||
2023 | @item @code{OPT} @code{D} option is default | |
2024 | ||
2025 | The m68k @code{OPT} @code{D} option is the default, unlike the MRI assembler. | |
2026 | @code{OPT NOD} may be used to turn it off. | |
2027 | ||
2028 | @item @code{XREF} pseudo-op. | |
2029 | ||
2030 | The m68k @code{XREF} pseudo-op is ignored. | |
2031 | ||
2032 | @item @code{.debug} pseudo-op | |
2033 | ||
2034 | The i960 @code{.debug} pseudo-op is not supported. | |
2035 | ||
2036 | @item @code{.extended} pseudo-op | |
2037 | ||
2038 | The i960 @code{.extended} pseudo-op is not supported. | |
2039 | ||
2040 | @item @code{.list} pseudo-op. | |
2041 | ||
2042 | The various options of the i960 @code{.list} pseudo-op are not supported. | |
2043 | ||
2044 | @item @code{.optimize} pseudo-op | |
2045 | ||
2046 | The i960 @code{.optimize} pseudo-op is not supported. | |
2047 | ||
2048 | @item @code{.output} pseudo-op | |
2049 | ||
2050 | The i960 @code{.output} pseudo-op is not supported. | |
2051 | ||
2052 | @item @code{.setreal} pseudo-op | |
2053 | ||
2054 | The i960 @code{.setreal} pseudo-op is not supported. | |
2055 | ||
2056 | @end itemize | |
2057 | ||
2058 | @node MD | |
c1253627 | 2059 | @section Dependency Tracking: @option{--MD} |
252b5132 RH |
2060 | |
2061 | @kindex --MD | |
2062 | @cindex dependency tracking | |
2063 | @cindex make rules | |
2064 | ||
a4fb0134 | 2065 | @command{@value{AS}} can generate a dependency file for the file it creates. This |
252b5132 RH |
2066 | file consists of a single rule suitable for @code{make} describing the |
2067 | dependencies of the main source file. | |
2068 | ||
2069 | The rule is written to the file named in its argument. | |
2070 | ||
2071 | This feature is used in the automatic updating of makefiles. | |
2072 | ||
2073 | @node o | |
a4fb0134 | 2074 | @section Name the Object File: @option{-o} |
252b5132 RH |
2075 | |
2076 | @kindex -o | |
2077 | @cindex naming object file | |
2078 | @cindex object file name | |
a4fb0134 | 2079 | There is always one object file output when you run @command{@value{AS}}. By |
252b5132 RH |
2080 | default it has the name |
2081 | @ifset GENERIC | |
2082 | @ifset I960 | |
2083 | @file{a.out} (or @file{b.out}, for Intel 960 targets only). | |
2084 | @end ifset | |
2085 | @ifclear I960 | |
2086 | @file{a.out}. | |
2087 | @end ifclear | |
2088 | @end ifset | |
2089 | @ifclear GENERIC | |
2090 | @ifset I960 | |
2091 | @file{b.out}. | |
2092 | @end ifset | |
2093 | @ifclear I960 | |
2094 | @file{a.out}. | |
2095 | @end ifclear | |
2096 | @end ifclear | |
2097 | You use this option (which takes exactly one filename) to give the | |
2098 | object file a different name. | |
2099 | ||
a4fb0134 | 2100 | Whatever the object file is called, @command{@value{AS}} overwrites any |
252b5132 RH |
2101 | existing file of the same name. |
2102 | ||
2103 | @node R | |
a4fb0134 | 2104 | @section Join Data and Text Sections: @option{-R} |
252b5132 RH |
2105 | |
2106 | @kindex -R | |
2107 | @cindex data and text sections, joining | |
2108 | @cindex text and data sections, joining | |
2109 | @cindex joining text and data sections | |
2110 | @cindex merging text and data sections | |
a4fb0134 | 2111 | @option{-R} tells @command{@value{AS}} to write the object file as if all |
252b5132 RH |
2112 | data-section data lives in the text section. This is only done at |
2113 | the very last moment: your binary data are the same, but data | |
2114 | section parts are relocated differently. The data section part of | |
2115 | your object file is zero bytes long because all its bytes are | |
2116 | appended to the text section. (@xref{Sections,,Sections and Relocation}.) | |
2117 | ||
a4fb0134 | 2118 | When you specify @option{-R} it would be possible to generate shorter |
252b5132 RH |
2119 | address displacements (because we do not have to cross between text and |
2120 | data section). We refrain from doing this simply for compatibility with | |
a4fb0134 | 2121 | older versions of @command{@value{AS}}. In future, @option{-R} may work this way. |
252b5132 | 2122 | |
c1253627 NC |
2123 | @ifset COFF-ELF |
2124 | When @command{@value{AS}} is configured for COFF or ELF output, | |
252b5132 RH |
2125 | this option is only useful if you use sections named @samp{.text} and |
2126 | @samp{.data}. | |
2127 | @end ifset | |
2128 | ||
2129 | @ifset HPPA | |
a4fb0134 SC |
2130 | @option{-R} is not supported for any of the HPPA targets. Using |
2131 | @option{-R} generates a warning from @command{@value{AS}}. | |
252b5132 RH |
2132 | @end ifset |
2133 | ||
2134 | @node statistics | |
a4fb0134 | 2135 | @section Display Assembly Statistics: @option{--statistics} |
252b5132 RH |
2136 | |
2137 | @kindex --statistics | |
2138 | @cindex statistics, about assembly | |
2139 | @cindex time, total for assembly | |
2140 | @cindex space used, maximum for assembly | |
2141 | Use @samp{--statistics} to display two statistics about the resources used by | |
a4fb0134 | 2142 | @command{@value{AS}}: the maximum amount of space allocated during the assembly |
252b5132 RH |
2143 | (in bytes), and the total execution time taken for the assembly (in @sc{cpu} |
2144 | seconds). | |
2145 | ||
2146 | @node traditional-format | |
c1253627 | 2147 | @section Compatible Output: @option{--traditional-format} |
252b5132 RH |
2148 | |
2149 | @kindex --traditional-format | |
a4fb0134 | 2150 | For some targets, the output of @command{@value{AS}} is different in some ways |
252b5132 | 2151 | from the output of some existing assembler. This switch requests |
a4fb0134 | 2152 | @command{@value{AS}} to use the traditional format instead. |
252b5132 RH |
2153 | |
2154 | For example, it disables the exception frame optimizations which | |
a4fb0134 | 2155 | @command{@value{AS}} normally does by default on @code{@value{GCC}} output. |
252b5132 RH |
2156 | |
2157 | @node v | |
a4fb0134 | 2158 | @section Announce Version: @option{-v} |
252b5132 RH |
2159 | |
2160 | @kindex -v | |
2161 | @kindex -version | |
2162 | @cindex assembler version | |
2163 | @cindex version of assembler | |
2164 | You can find out what version of as is running by including the | |
2165 | option @samp{-v} (which you can also spell as @samp{-version}) on the | |
2166 | command line. | |
2167 | ||
2168 | @node W | |
a4fb0134 | 2169 | @section Control Warnings: @option{-W}, @option{--warn}, @option{--no-warn}, @option{--fatal-warnings} |
252b5132 | 2170 | |
a4fb0134 | 2171 | @command{@value{AS}} should never give a warning or error message when |
252b5132 | 2172 | assembling compiler output. But programs written by people often |
a4fb0134 | 2173 | cause @command{@value{AS}} to give a warning that a particular assumption was |
252b5132 | 2174 | made. All such warnings are directed to the standard error file. |
2bdd6cf5 | 2175 | |
c1253627 NC |
2176 | @kindex -W |
2177 | @kindex --no-warn | |
2bdd6cf5 GK |
2178 | @cindex suppressing warnings |
2179 | @cindex warnings, suppressing | |
a4fb0134 | 2180 | If you use the @option{-W} and @option{--no-warn} options, no warnings are issued. |
2bdd6cf5 | 2181 | This only affects the warning messages: it does not change any particular of |
a4fb0134 | 2182 | how @command{@value{AS}} assembles your file. Errors, which stop the assembly, |
2bdd6cf5 GK |
2183 | are still reported. |
2184 | ||
c1253627 | 2185 | @kindex --fatal-warnings |
2bdd6cf5 GK |
2186 | @cindex errors, caused by warnings |
2187 | @cindex warnings, causing error | |
a4fb0134 | 2188 | If you use the @option{--fatal-warnings} option, @command{@value{AS}} considers |
2bdd6cf5 GK |
2189 | files that generate warnings to be in error. |
2190 | ||
c1253627 | 2191 | @kindex --warn |
2bdd6cf5 | 2192 | @cindex warnings, switching on |
a4fb0134 | 2193 | You can switch these options off again by specifying @option{--warn}, which |
2bdd6cf5 | 2194 | causes warnings to be output as usual. |
252b5132 RH |
2195 | |
2196 | @node Z | |
a4fb0134 | 2197 | @section Generate Object File in Spite of Errors: @option{-Z} |
252b5132 RH |
2198 | @cindex object file, after errors |
2199 | @cindex errors, continuing after | |
a4fb0134 | 2200 | After an error message, @command{@value{AS}} normally produces no output. If for |
252b5132 | 2201 | some reason you are interested in object file output even after |
a4fb0134 SC |
2202 | @command{@value{AS}} gives an error message on your program, use the @samp{-Z} |
2203 | option. If there are any errors, @command{@value{AS}} continues anyways, and | |
252b5132 RH |
2204 | writes an object file after a final warning message of the form @samp{@var{n} |
2205 | errors, @var{m} warnings, generating bad object file.} | |
2206 | ||
2207 | @node Syntax | |
2208 | @chapter Syntax | |
2209 | ||
2210 | @cindex machine-independent syntax | |
2211 | @cindex syntax, machine-independent | |
2212 | This chapter describes the machine-independent syntax allowed in a | |
a4fb0134 | 2213 | source file. @command{@value{AS}} syntax is similar to what many other |
252b5132 RH |
2214 | assemblers use; it is inspired by the BSD 4.2 |
2215 | @ifclear VAX | |
2216 | assembler. | |
2217 | @end ifclear | |
2218 | @ifset VAX | |
a4fb0134 | 2219 | assembler, except that @command{@value{AS}} does not assemble Vax bit-fields. |
252b5132 RH |
2220 | @end ifset |
2221 | ||
2222 | @menu | |
2223 | * Preprocessing:: Preprocessing | |
2224 | * Whitespace:: Whitespace | |
2225 | * Comments:: Comments | |
2226 | * Symbol Intro:: Symbols | |
2227 | * Statements:: Statements | |
2228 | * Constants:: Constants | |
2229 | @end menu | |
2230 | ||
2231 | @node Preprocessing | |
2232 | @section Preprocessing | |
2233 | ||
2234 | @cindex preprocessing | |
a4fb0134 | 2235 | The @command{@value{AS}} internal preprocessor: |
252b5132 RH |
2236 | @itemize @bullet |
2237 | @cindex whitespace, removed by preprocessor | |
2238 | @item | |
2239 | adjusts and removes extra whitespace. It leaves one space or tab before | |
2240 | the keywords on a line, and turns any other whitespace on the line into | |
2241 | a single space. | |
2242 | ||
2243 | @cindex comments, removed by preprocessor | |
2244 | @item | |
2245 | removes all comments, replacing them with a single space, or an | |
2246 | appropriate number of newlines. | |
2247 | ||
2248 | @cindex constants, converted by preprocessor | |
2249 | @item | |
2250 | converts character constants into the appropriate numeric values. | |
2251 | @end itemize | |
2252 | ||
2253 | It does not do macro processing, include file handling, or | |
2254 | anything else you may get from your C compiler's preprocessor. You can | |
2255 | do include file processing with the @code{.include} directive | |
2256 | (@pxref{Include,,@code{.include}}). You can use the @sc{gnu} C compiler driver | |
c1253627 | 2257 | to get other ``CPP'' style preprocessing by giving the input file a |
96e9638b | 2258 | @samp{.S} suffix. @xref{Overall Options, ,Options Controlling the Kind of |
252b5132 RH |
2259 | Output, gcc.info, Using GNU CC}. |
2260 | ||
2261 | Excess whitespace, comments, and character constants | |
2262 | cannot be used in the portions of the input text that are not | |
2263 | preprocessed. | |
2264 | ||
2265 | @cindex turning preprocessing on and off | |
2266 | @cindex preprocessing, turning on and off | |
2267 | @kindex #NO_APP | |
2268 | @kindex #APP | |
2269 | If the first line of an input file is @code{#NO_APP} or if you use the | |
2270 | @samp{-f} option, whitespace and comments are not removed from the input file. | |
2271 | Within an input file, you can ask for whitespace and comment removal in | |
2272 | specific portions of the by putting a line that says @code{#APP} before the | |
2273 | text that may contain whitespace or comments, and putting a line that says | |
2274 | @code{#NO_APP} after this text. This feature is mainly intend to support | |
2275 | @code{asm} statements in compilers whose output is otherwise free of comments | |
2276 | and whitespace. | |
2277 | ||
2278 | @node Whitespace | |
2279 | @section Whitespace | |
2280 | ||
2281 | @cindex whitespace | |
2282 | @dfn{Whitespace} is one or more blanks or tabs, in any order. | |
2283 | Whitespace is used to separate symbols, and to make programs neater for | |
2284 | people to read. Unless within character constants | |
2285 | (@pxref{Characters,,Character Constants}), any whitespace means the same | |
2286 | as exactly one space. | |
2287 | ||
2288 | @node Comments | |
2289 | @section Comments | |
2290 | ||
2291 | @cindex comments | |
a4fb0134 | 2292 | There are two ways of rendering comments to @command{@value{AS}}. In both |
252b5132 RH |
2293 | cases the comment is equivalent to one space. |
2294 | ||
2295 | Anything from @samp{/*} through the next @samp{*/} is a comment. | |
2296 | This means you may not nest these comments. | |
2297 | ||
2298 | @smallexample | |
2299 | /* | |
2300 | The only way to include a newline ('\n') in a comment | |
2301 | is to use this sort of comment. | |
2302 | */ | |
2303 | ||
2304 | /* This sort of comment does not nest. */ | |
2305 | @end smallexample | |
2306 | ||
2307 | @cindex line comment character | |
2308 | Anything from the @dfn{line comment} character to the next newline | |
2309 | is considered a comment and is ignored. The line comment character is | |
252b5132 RH |
2310 | @ifset ARC |
2311 | @samp{;} on the ARC; | |
2312 | @end ifset | |
550262c4 NC |
2313 | @ifset ARM |
2314 | @samp{@@} on the ARM; | |
2315 | @end ifset | |
252b5132 RH |
2316 | @ifset H8/300 |
2317 | @samp{;} for the H8/300 family; | |
2318 | @end ifset | |
252b5132 RH |
2319 | @ifset HPPA |
2320 | @samp{;} for the HPPA; | |
2321 | @end ifset | |
55b62671 AJ |
2322 | @ifset I80386 |
2323 | @samp{#} on the i386 and x86-64; | |
2324 | @end ifset | |
252b5132 RH |
2325 | @ifset I960 |
2326 | @samp{#} on the i960; | |
2327 | @end ifset | |
e135f41b NC |
2328 | @ifset PDP11 |
2329 | @samp{;} for the PDP-11; | |
2330 | @end ifset | |
041dd5a9 ILT |
2331 | @ifset PJ |
2332 | @samp{;} for picoJava; | |
2333 | @end ifset | |
418c1742 | 2334 | @ifset PPC |
3fb9d77f | 2335 | @samp{#} for Motorola PowerPC; |
418c1742 | 2336 | @end ifset |
11c19e16 MS |
2337 | @ifset S390 |
2338 | @samp{#} for IBM S/390; | |
2339 | @end ifset | |
c0157db4 NC |
2340 | @ifset SCORE |
2341 | @samp{#} for the Sunplus SCORE; | |
2342 | @end ifset | |
252b5132 | 2343 | @ifset SH |
ef230218 | 2344 | @samp{!} for the Renesas / SuperH SH; |
252b5132 RH |
2345 | @end ifset |
2346 | @ifset SPARC | |
2347 | @samp{!} on the SPARC; | |
2348 | @end ifset | |
a40cbfa3 NC |
2349 | @ifset IP2K |
2350 | @samp{#} on the ip2k; | |
2351 | @end ifset | |
49f58d10 JB |
2352 | @ifset M32C |
2353 | @samp{#} on the m32c; | |
2354 | @end ifset | |
252b5132 RH |
2355 | @ifset M32R |
2356 | @samp{#} on the m32r; | |
2357 | @end ifset | |
2358 | @ifset M680X0 | |
2359 | @samp{|} on the 680x0; | |
2360 | @end ifset | |
60bcf0fa NC |
2361 | @ifset M68HC11 |
2362 | @samp{#} on the 68HC11 and 68HC12; | |
2363 | @end ifset | |
046d31c2 NC |
2364 | @ifset RX |
2365 | @samp{#} on the RX; | |
2366 | @end ifset | |
40b36596 JM |
2367 | @ifset TIC6X |
2368 | @samp{;} on the TMS320C6X; | |
2369 | @end ifset | |
252b5132 RH |
2370 | @ifset VAX |
2371 | @samp{#} on the Vax; | |
2372 | @end ifset | |
3c9b82ba NC |
2373 | @ifset Z80 |
2374 | @samp{;} for the Z80; | |
2375 | @end ifset | |
252b5132 RH |
2376 | @ifset Z8000 |
2377 | @samp{!} for the Z8000; | |
2378 | @end ifset | |
2379 | @ifset V850 | |
2380 | @samp{#} on the V850; | |
2381 | @end ifset | |
e0001a05 NC |
2382 | @ifset XTENSA |
2383 | @samp{#} for Xtensa systems; | |
2384 | @end ifset | |
252b5132 | 2385 | see @ref{Machine Dependencies}. @refill |
81b0b3f1 | 2386 | @c FIXME What about i860? |
252b5132 RH |
2387 | |
2388 | @ifset GENERIC | |
2389 | On some machines there are two different line comment characters. One | |
2390 | character only begins a comment if it is the first non-whitespace character on | |
2391 | a line, while the other always begins a comment. | |
2392 | @end ifset | |
2393 | ||
2394 | @ifset V850 | |
2395 | The V850 assembler also supports a double dash as starting a comment that | |
2396 | extends to the end of the line. | |
2397 | ||
2398 | @samp{--}; | |
2399 | @end ifset | |
2400 | ||
2401 | @kindex # | |
2402 | @cindex lines starting with @code{#} | |
2403 | @cindex logical line numbers | |
2404 | To be compatible with past assemblers, lines that begin with @samp{#} have a | |
2405 | special interpretation. Following the @samp{#} should be an absolute | |
2406 | expression (@pxref{Expressions}): the logical line number of the @emph{next} | |
96e9638b | 2407 | line. Then a string (@pxref{Strings, ,Strings}) is allowed: if present it is a |
252b5132 RH |
2408 | new logical file name. The rest of the line, if any, should be whitespace. |
2409 | ||
2410 | If the first non-whitespace characters on the line are not numeric, | |
2411 | the line is ignored. (Just like a comment.) | |
2412 | ||
2413 | @smallexample | |
2414 | # This is an ordinary comment. | |
2415 | # 42-6 "new_file_name" # New logical file name | |
2416 | # This is logical line # 36. | |
2417 | @end smallexample | |
2418 | This feature is deprecated, and may disappear from future versions | |
a4fb0134 | 2419 | of @command{@value{AS}}. |
252b5132 RH |
2420 | |
2421 | @node Symbol Intro | |
2422 | @section Symbols | |
2423 | ||
2424 | @cindex characters used in symbols | |
2425 | @ifclear SPECIAL-SYMS | |
2426 | A @dfn{symbol} is one or more characters chosen from the set of all | |
2427 | letters (both upper and lower case), digits and the three characters | |
2428 | @samp{_.$}. | |
2429 | @end ifclear | |
2430 | @ifset SPECIAL-SYMS | |
2431 | @ifclear GENERIC | |
2432 | @ifset H8 | |
2433 | A @dfn{symbol} is one or more characters chosen from the set of all | |
2434 | letters (both upper and lower case), digits and the three characters | |
2435 | @samp{._$}. (Save that, on the H8/300 only, you may not use @samp{$} in | |
2436 | symbol names.) | |
2437 | @end ifset | |
2438 | @end ifclear | |
2439 | @end ifset | |
2440 | @ifset GENERIC | |
2441 | On most machines, you can also use @code{$} in symbol names; exceptions | |
2442 | are noted in @ref{Machine Dependencies}. | |
2443 | @end ifset | |
2444 | No symbol may begin with a digit. Case is significant. | |
2445 | There is no length limit: all characters are significant. Symbols are | |
2446 | delimited by characters not in that set, or by the beginning of a file | |
2447 | (since the source program must end with a newline, the end of a file is | |
2448 | not a possible symbol delimiter). @xref{Symbols}. | |
2449 | @cindex length of symbols | |
2450 | ||
2451 | @node Statements | |
2452 | @section Statements | |
2453 | ||
2454 | @cindex statements, structure of | |
2455 | @cindex line separator character | |
2456 | @cindex statement separator character | |
2457 | @ifclear GENERIC | |
2458 | @ifclear abnormal-separator | |
2459 | A @dfn{statement} ends at a newline character (@samp{\n}) or at a | |
2460 | semicolon (@samp{;}). The newline or semicolon is considered part of | |
2461 | the preceding statement. Newlines and semicolons within character | |
2462 | constants are an exception: they do not end statements. | |
2463 | @end ifclear | |
2464 | @ifset abnormal-separator | |
252b5132 | 2465 | @ifset HPPA |
01642c12 | 2466 | A @dfn{statement} ends at a newline character (@samp{\n}) or an exclamation |
252b5132 RH |
2467 | point (@samp{!}). The newline or exclamation point is considered part of the |
2468 | preceding statement. Newlines and exclamation points within character | |
2469 | constants are an exception: they do not end statements. | |
2470 | @end ifset | |
2471 | @ifset H8 | |
2472 | A @dfn{statement} ends at a newline character (@samp{\n}); or (for the | |
7be1c489 | 2473 | H8/300) a dollar sign (@samp{$}); or (for the Renesas-SH) a semicolon |
252b5132 RH |
2474 | (@samp{;}). The newline or separator character is considered part of |
2475 | the preceding statement. Newlines and separators within character | |
2476 | constants are an exception: they do not end statements. | |
2477 | @end ifset | |
2478 | @end ifset | |
2479 | @end ifclear | |
2480 | @ifset GENERIC | |
2481 | A @dfn{statement} ends at a newline character (@samp{\n}) or line | |
96e9638b BW |
2482 | separator character. (The line separator is usually @samp{;}, unless this |
2483 | conflicts with the comment character; see @ref{Machine Dependencies}.) The | |
252b5132 RH |
2484 | newline or separator character is considered part of the preceding |
2485 | statement. Newlines and separators within character constants are an | |
2486 | exception: they do not end statements. | |
2487 | @end ifset | |
2488 | ||
2489 | @cindex newline, required at file end | |
2490 | @cindex EOF, newline must precede | |
2491 | It is an error to end any statement with end-of-file: the last | |
2492 | character of any input file should be a newline.@refill | |
2493 | ||
2494 | An empty statement is allowed, and may include whitespace. It is ignored. | |
2495 | ||
2496 | @cindex instructions and directives | |
2497 | @cindex directives and instructions | |
2498 | @c "key symbol" is not used elsewhere in the document; seems pedantic to | |
2499 | @c @defn{} it in that case, as was done previously... doc@cygnus.com, | |
2500 | @c 13feb91. | |
2501 | A statement begins with zero or more labels, optionally followed by a | |
2502 | key symbol which determines what kind of statement it is. The key | |
2503 | symbol determines the syntax of the rest of the statement. If the | |
2504 | symbol begins with a dot @samp{.} then the statement is an assembler | |
2505 | directive: typically valid for any computer. If the symbol begins with | |
2506 | a letter the statement is an assembly language @dfn{instruction}: it | |
2507 | assembles into a machine language instruction. | |
2508 | @ifset GENERIC | |
a4fb0134 | 2509 | Different versions of @command{@value{AS}} for different computers |
252b5132 RH |
2510 | recognize different instructions. In fact, the same symbol may |
2511 | represent a different instruction in a different computer's assembly | |
2512 | language.@refill | |
2513 | @end ifset | |
2514 | ||
2515 | @cindex @code{:} (label) | |
2516 | @cindex label (@code{:}) | |
2517 | A label is a symbol immediately followed by a colon (@code{:}). | |
2518 | Whitespace before a label or after a colon is permitted, but you may not | |
2519 | have whitespace between a label's symbol and its colon. @xref{Labels}. | |
2520 | ||
2521 | @ifset HPPA | |
01642c12 | 2522 | For HPPA targets, labels need not be immediately followed by a colon, but |
252b5132 RH |
2523 | the definition of a label must begin in column zero. This also implies that |
2524 | only one label may be defined on each line. | |
2525 | @end ifset | |
2526 | ||
2527 | @smallexample | |
2528 | label: .directive followed by something | |
2529 | another_label: # This is an empty statement. | |
2530 | instruction operand_1, operand_2, @dots{} | |
2531 | @end smallexample | |
2532 | ||
2533 | @node Constants | |
2534 | @section Constants | |
2535 | ||
2536 | @cindex constants | |
2537 | A constant is a number, written so that its value is known by | |
2538 | inspection, without knowing any context. Like this: | |
2539 | @smallexample | |
2540 | @group | |
2541 | .byte 74, 0112, 092, 0x4A, 0X4a, 'J, '\J # All the same value. | |
2542 | .ascii "Ring the bell\7" # A string constant. | |
2543 | .octa 0x123456789abcdef0123456789ABCDEF0 # A bignum. | |
2544 | .float 0f-314159265358979323846264338327\ | |
2545 | 95028841971.693993751E-40 # - pi, a flonum. | |
2546 | @end group | |
2547 | @end smallexample | |
2548 | ||
2549 | @menu | |
2550 | * Characters:: Character Constants | |
2551 | * Numbers:: Number Constants | |
2552 | @end menu | |
2553 | ||
2554 | @node Characters | |
2555 | @subsection Character Constants | |
2556 | ||
2557 | @cindex character constants | |
2558 | @cindex constants, character | |
2559 | There are two kinds of character constants. A @dfn{character} stands | |
2560 | for one character in one byte and its value may be used in | |
2561 | numeric expressions. String constants (properly called string | |
2562 | @emph{literals}) are potentially many bytes and their values may not be | |
2563 | used in arithmetic expressions. | |
2564 | ||
2565 | @menu | |
2566 | * Strings:: Strings | |
2567 | * Chars:: Characters | |
2568 | @end menu | |
2569 | ||
2570 | @node Strings | |
2571 | @subsubsection Strings | |
2572 | ||
2573 | @cindex string constants | |
2574 | @cindex constants, string | |
2575 | A @dfn{string} is written between double-quotes. It may contain | |
2576 | double-quotes or null characters. The way to get special characters | |
2577 | into a string is to @dfn{escape} these characters: precede them with | |
2578 | a backslash @samp{\} character. For example @samp{\\} represents | |
2579 | one backslash: the first @code{\} is an escape which tells | |
a4fb0134 SC |
2580 | @command{@value{AS}} to interpret the second character literally as a backslash |
2581 | (which prevents @command{@value{AS}} from recognizing the second @code{\} as an | |
252b5132 RH |
2582 | escape character). The complete list of escapes follows. |
2583 | ||
2584 | @cindex escape codes, character | |
2585 | @cindex character escape codes | |
2586 | @table @kbd | |
2587 | @c @item \a | |
2588 | @c Mnemonic for ACKnowledge; for ASCII this is octal code 007. | |
2589 | @c | |
2590 | @cindex @code{\b} (backspace character) | |
2591 | @cindex backspace (@code{\b}) | |
2592 | @item \b | |
2593 | Mnemonic for backspace; for ASCII this is octal code 010. | |
2594 | ||
2595 | @c @item \e | |
2596 | @c Mnemonic for EOText; for ASCII this is octal code 004. | |
2597 | @c | |
2598 | @cindex @code{\f} (formfeed character) | |
2599 | @cindex formfeed (@code{\f}) | |
2600 | @item \f | |
2601 | Mnemonic for FormFeed; for ASCII this is octal code 014. | |
2602 | ||
2603 | @cindex @code{\n} (newline character) | |
2604 | @cindex newline (@code{\n}) | |
2605 | @item \n | |
2606 | Mnemonic for newline; for ASCII this is octal code 012. | |
2607 | ||
2608 | @c @item \p | |
2609 | @c Mnemonic for prefix; for ASCII this is octal code 033, usually known as @code{escape}. | |
2610 | @c | |
2611 | @cindex @code{\r} (carriage return character) | |
2612 | @cindex carriage return (@code{\r}) | |
2613 | @item \r | |
2614 | Mnemonic for carriage-Return; for ASCII this is octal code 015. | |
2615 | ||
2616 | @c @item \s | |
2617 | @c Mnemonic for space; for ASCII this is octal code 040. Included for compliance with | |
2618 | @c other assemblers. | |
2619 | @c | |
2620 | @cindex @code{\t} (tab) | |
2621 | @cindex tab (@code{\t}) | |
2622 | @item \t | |
2623 | Mnemonic for horizontal Tab; for ASCII this is octal code 011. | |
2624 | ||
2625 | @c @item \v | |
2626 | @c Mnemonic for Vertical tab; for ASCII this is octal code 013. | |
2627 | @c @item \x @var{digit} @var{digit} @var{digit} | |
2628 | @c A hexadecimal character code. The numeric code is 3 hexadecimal digits. | |
2629 | @c | |
2630 | @cindex @code{\@var{ddd}} (octal character code) | |
2631 | @cindex octal character code (@code{\@var{ddd}}) | |
2632 | @item \ @var{digit} @var{digit} @var{digit} | |
2633 | An octal character code. The numeric code is 3 octal digits. | |
2634 | For compatibility with other Unix systems, 8 and 9 are accepted as digits: | |
2635 | for example, @code{\008} has the value 010, and @code{\009} the value 011. | |
2636 | ||
2637 | @cindex @code{\@var{xd...}} (hex character code) | |
2638 | @cindex hex character code (@code{\@var{xd...}}) | |
2639 | @item \@code{x} @var{hex-digits...} | |
2640 | A hex character code. All trailing hex digits are combined. Either upper or | |
2641 | lower case @code{x} works. | |
2642 | ||
2643 | @cindex @code{\\} (@samp{\} character) | |
2644 | @cindex backslash (@code{\\}) | |
2645 | @item \\ | |
2646 | Represents one @samp{\} character. | |
2647 | ||
2648 | @c @item \' | |
2649 | @c Represents one @samp{'} (accent acute) character. | |
2650 | @c This is needed in single character literals | |
2651 | @c (@xref{Characters,,Character Constants}.) to represent | |
2652 | @c a @samp{'}. | |
2653 | @c | |
2654 | @cindex @code{\"} (doublequote character) | |
2655 | @cindex doublequote (@code{\"}) | |
2656 | @item \" | |
2657 | Represents one @samp{"} character. Needed in strings to represent | |
2658 | this character, because an unescaped @samp{"} would end the string. | |
2659 | ||
2660 | @item \ @var{anything-else} | |
2661 | Any other character when escaped by @kbd{\} gives a warning, but | |
2662 | assembles as if the @samp{\} was not present. The idea is that if | |
2663 | you used an escape sequence you clearly didn't want the literal | |
a4fb0134 SC |
2664 | interpretation of the following character. However @command{@value{AS}} has no |
2665 | other interpretation, so @command{@value{AS}} knows it is giving you the wrong | |
252b5132 RH |
2666 | code and warns you of the fact. |
2667 | @end table | |
2668 | ||
2669 | Which characters are escapable, and what those escapes represent, | |
2670 | varies widely among assemblers. The current set is what we think | |
2671 | the BSD 4.2 assembler recognizes, and is a subset of what most C | |
2672 | compilers recognize. If you are in doubt, do not use an escape | |
2673 | sequence. | |
2674 | ||
2675 | @node Chars | |
2676 | @subsubsection Characters | |
2677 | ||
2678 | @cindex single character constant | |
2679 | @cindex character, single | |
2680 | @cindex constant, single character | |
2681 | A single character may be written as a single quote immediately | |
2682 | followed by that character. The same escapes apply to characters as | |
2683 | to strings. So if you want to write the character backslash, you | |
2684 | must write @kbd{'\\} where the first @code{\} escapes the second | |
2685 | @code{\}. As you can see, the quote is an acute accent, not a | |
2686 | grave accent. A newline | |
2687 | @ifclear GENERIC | |
2688 | @ifclear abnormal-separator | |
2689 | (or semicolon @samp{;}) | |
2690 | @end ifclear | |
2691 | @ifset abnormal-separator | |
252b5132 RH |
2692 | @ifset H8 |
2693 | (or dollar sign @samp{$}, for the H8/300; or semicolon @samp{;} for the | |
7be1c489 | 2694 | Renesas SH) |
252b5132 RH |
2695 | @end ifset |
2696 | @end ifset | |
2697 | @end ifclear | |
2698 | immediately following an acute accent is taken as a literal character | |
2699 | and does not count as the end of a statement. The value of a character | |
2700 | constant in a numeric expression is the machine's byte-wide code for | |
a4fb0134 | 2701 | that character. @command{@value{AS}} assumes your character code is ASCII: |
252b5132 RH |
2702 | @kbd{'A} means 65, @kbd{'B} means 66, and so on. @refill |
2703 | ||
2704 | @node Numbers | |
2705 | @subsection Number Constants | |
2706 | ||
2707 | @cindex constants, number | |
2708 | @cindex number constants | |
a4fb0134 | 2709 | @command{@value{AS}} distinguishes three kinds of numbers according to how they |
252b5132 RH |
2710 | are stored in the target machine. @emph{Integers} are numbers that |
2711 | would fit into an @code{int} in the C language. @emph{Bignums} are | |
2712 | integers, but they are stored in more than 32 bits. @emph{Flonums} | |
2713 | are floating point numbers, described below. | |
2714 | ||
2715 | @menu | |
2716 | * Integers:: Integers | |
2717 | * Bignums:: Bignums | |
2718 | * Flonums:: Flonums | |
2719 | @ifclear GENERIC | |
2720 | @ifset I960 | |
2721 | * Bit Fields:: Bit Fields | |
2722 | @end ifset | |
2723 | @end ifclear | |
2724 | @end menu | |
2725 | ||
2726 | @node Integers | |
2727 | @subsubsection Integers | |
2728 | @cindex integers | |
2729 | @cindex constants, integer | |
2730 | ||
2731 | @cindex binary integers | |
2732 | @cindex integers, binary | |
2733 | A binary integer is @samp{0b} or @samp{0B} followed by zero or more of | |
2734 | the binary digits @samp{01}. | |
2735 | ||
2736 | @cindex octal integers | |
2737 | @cindex integers, octal | |
2738 | An octal integer is @samp{0} followed by zero or more of the octal | |
2739 | digits (@samp{01234567}). | |
2740 | ||
2741 | @cindex decimal integers | |
2742 | @cindex integers, decimal | |
2743 | A decimal integer starts with a non-zero digit followed by zero or | |
2744 | more digits (@samp{0123456789}). | |
2745 | ||
2746 | @cindex hexadecimal integers | |
2747 | @cindex integers, hexadecimal | |
2748 | A hexadecimal integer is @samp{0x} or @samp{0X} followed by one or | |
2749 | more hexadecimal digits chosen from @samp{0123456789abcdefABCDEF}. | |
2750 | ||
2751 | Integers have the usual values. To denote a negative integer, use | |
2752 | the prefix operator @samp{-} discussed under expressions | |
2753 | (@pxref{Prefix Ops,,Prefix Operators}). | |
2754 | ||
2755 | @node Bignums | |
2756 | @subsubsection Bignums | |
2757 | ||
2758 | @cindex bignums | |
2759 | @cindex constants, bignum | |
2760 | A @dfn{bignum} has the same syntax and semantics as an integer | |
2761 | except that the number (or its negative) takes more than 32 bits to | |
2762 | represent in binary. The distinction is made because in some places | |
2763 | integers are permitted while bignums are not. | |
2764 | ||
2765 | @node Flonums | |
2766 | @subsubsection Flonums | |
2767 | @cindex flonums | |
2768 | @cindex floating point numbers | |
2769 | @cindex constants, floating point | |
2770 | ||
2771 | @cindex precision, floating point | |
2772 | A @dfn{flonum} represents a floating point number. The translation is | |
2773 | indirect: a decimal floating point number from the text is converted by | |
a4fb0134 | 2774 | @command{@value{AS}} to a generic binary floating point number of more than |
252b5132 RH |
2775 | sufficient precision. This generic floating point number is converted |
2776 | to a particular computer's floating point format (or formats) by a | |
a4fb0134 | 2777 | portion of @command{@value{AS}} specialized to that computer. |
252b5132 RH |
2778 | |
2779 | A flonum is written by writing (in order) | |
2780 | @itemize @bullet | |
2781 | @item | |
2782 | The digit @samp{0}. | |
2783 | @ifset HPPA | |
2784 | (@samp{0} is optional on the HPPA.) | |
2785 | @end ifset | |
2786 | ||
2787 | @item | |
a4fb0134 | 2788 | A letter, to tell @command{@value{AS}} the rest of the number is a flonum. |
252b5132 RH |
2789 | @ifset GENERIC |
2790 | @kbd{e} is recommended. Case is not important. | |
2791 | @ignore | |
2792 | @c FIXME: verify if flonum syntax really this vague for most cases | |
2793 | (Any otherwise illegal letter works here, but that might be changed. Vax BSD | |
2794 | 4.2 assembler seems to allow any of @samp{defghDEFGH}.) | |
2795 | @end ignore | |
2796 | ||
7be1c489 | 2797 | On the H8/300, Renesas / SuperH SH, |
252b5132 RH |
2798 | and AMD 29K architectures, the letter must be |
2799 | one of the letters @samp{DFPRSX} (in upper or lower case). | |
2800 | ||
2801 | On the ARC, the letter must be one of the letters @samp{DFRS} | |
2802 | (in upper or lower case). | |
2803 | ||
2804 | On the Intel 960 architecture, the letter must be | |
2805 | one of the letters @samp{DFT} (in upper or lower case). | |
2806 | ||
2807 | On the HPPA architecture, the letter must be @samp{E} (upper case only). | |
2808 | @end ifset | |
2809 | @ifclear GENERIC | |
252b5132 RH |
2810 | @ifset ARC |
2811 | One of the letters @samp{DFRS} (in upper or lower case). | |
2812 | @end ifset | |
2813 | @ifset H8 | |
2814 | One of the letters @samp{DFPRSX} (in upper or lower case). | |
2815 | @end ifset | |
2816 | @ifset HPPA | |
2817 | The letter @samp{E} (upper case only). | |
2818 | @end ifset | |
2819 | @ifset I960 | |
2820 | One of the letters @samp{DFT} (in upper or lower case). | |
2821 | @end ifset | |
2822 | @end ifclear | |
2823 | ||
2824 | @item | |
2825 | An optional sign: either @samp{+} or @samp{-}. | |
2826 | ||
2827 | @item | |
2828 | An optional @dfn{integer part}: zero or more decimal digits. | |
2829 | ||
2830 | @item | |
2831 | An optional @dfn{fractional part}: @samp{.} followed by zero | |
2832 | or more decimal digits. | |
2833 | ||
2834 | @item | |
2835 | An optional exponent, consisting of: | |
2836 | ||
2837 | @itemize @bullet | |
2838 | @item | |
2839 | An @samp{E} or @samp{e}. | |
2840 | @c I can't find a config where "EXP_CHARS" is other than 'eE', but in | |
2841 | @c principle this can perfectly well be different on different targets. | |
2842 | @item | |
2843 | Optional sign: either @samp{+} or @samp{-}. | |
2844 | @item | |
2845 | One or more decimal digits. | |
2846 | @end itemize | |
2847 | ||
2848 | @end itemize | |
2849 | ||
2850 | At least one of the integer part or the fractional part must be | |
2851 | present. The floating point number has the usual base-10 value. | |
2852 | ||
a4fb0134 | 2853 | @command{@value{AS}} does all processing using integers. Flonums are computed |
252b5132 | 2854 | independently of any floating point hardware in the computer running |
a4fb0134 | 2855 | @command{@value{AS}}. |
252b5132 RH |
2856 | |
2857 | @ifclear GENERIC | |
2858 | @ifset I960 | |
2859 | @c Bit fields are written as a general facility but are also controlled | |
2860 | @c by a conditional-compilation flag---which is as of now (21mar91) | |
2861 | @c turned on only by the i960 config of GAS. | |
2862 | @node Bit Fields | |
2863 | @subsubsection Bit Fields | |
2864 | ||
2865 | @cindex bit fields | |
2866 | @cindex constants, bit field | |
2867 | You can also define numeric constants as @dfn{bit fields}. | |
b45619c0 | 2868 | Specify two numbers separated by a colon--- |
252b5132 RH |
2869 | @example |
2870 | @var{mask}:@var{value} | |
2871 | @end example | |
2872 | @noindent | |
a4fb0134 | 2873 | @command{@value{AS}} applies a bitwise @sc{and} between @var{mask} and |
252b5132 RH |
2874 | @var{value}. |
2875 | ||
2876 | The resulting number is then packed | |
2877 | @ifset GENERIC | |
2878 | @c this conditional paren in case bit fields turned on elsewhere than 960 | |
2879 | (in host-dependent byte order) | |
2880 | @end ifset | |
2881 | into a field whose width depends on which assembler directive has the | |
2882 | bit-field as its argument. Overflow (a result from the bitwise and | |
2883 | requiring more binary digits to represent) is not an error; instead, | |
2884 | more constants are generated, of the specified width, beginning with the | |
2885 | least significant digits.@refill | |
2886 | ||
2887 | The directives @code{.byte}, @code{.hword}, @code{.int}, @code{.long}, | |
2888 | @code{.short}, and @code{.word} accept bit-field arguments. | |
2889 | @end ifset | |
2890 | @end ifclear | |
2891 | ||
2892 | @node Sections | |
2893 | @chapter Sections and Relocation | |
2894 | @cindex sections | |
2895 | @cindex relocation | |
2896 | ||
2897 | @menu | |
2898 | * Secs Background:: Background | |
2899 | * Ld Sections:: Linker Sections | |
2900 | * As Sections:: Assembler Internal Sections | |
2901 | * Sub-Sections:: Sub-Sections | |
2902 | * bss:: bss Section | |
2903 | @end menu | |
2904 | ||
2905 | @node Secs Background | |
2906 | @section Background | |
2907 | ||
2908 | Roughly, a section is a range of addresses, with no gaps; all data | |
2909 | ``in'' those addresses is treated the same for some particular purpose. | |
2910 | For example there may be a ``read only'' section. | |
2911 | ||
2912 | @cindex linker, and assembler | |
2913 | @cindex assembler, and linker | |
2914 | The linker @code{@value{LD}} reads many object files (partial programs) and | |
a4fb0134 | 2915 | combines their contents to form a runnable program. When @command{@value{AS}} |
252b5132 RH |
2916 | emits an object file, the partial program is assumed to start at address 0. |
2917 | @code{@value{LD}} assigns the final addresses for the partial program, so that | |
2918 | different partial programs do not overlap. This is actually an | |
a4fb0134 | 2919 | oversimplification, but it suffices to explain how @command{@value{AS}} uses |
252b5132 RH |
2920 | sections. |
2921 | ||
2922 | @code{@value{LD}} moves blocks of bytes of your program to their run-time | |
2923 | addresses. These blocks slide to their run-time addresses as rigid | |
2924 | units; their length does not change and neither does the order of bytes | |
2925 | within them. Such a rigid unit is called a @emph{section}. Assigning | |
2926 | run-time addresses to sections is called @dfn{relocation}. It includes | |
2927 | the task of adjusting mentions of object-file addresses so they refer to | |
2928 | the proper run-time addresses. | |
2929 | @ifset H8 | |
7be1c489 | 2930 | For the H8/300, and for the Renesas / SuperH SH, |
a4fb0134 | 2931 | @command{@value{AS}} pads sections if needed to |
252b5132 RH |
2932 | ensure they end on a word (sixteen bit) boundary. |
2933 | @end ifset | |
2934 | ||
2935 | @cindex standard assembler sections | |
a4fb0134 | 2936 | An object file written by @command{@value{AS}} has at least three sections, any |
252b5132 RH |
2937 | of which may be empty. These are named @dfn{text}, @dfn{data} and |
2938 | @dfn{bss} sections. | |
2939 | ||
c1253627 | 2940 | @ifset COFF-ELF |
252b5132 | 2941 | @ifset GENERIC |
c1253627 | 2942 | When it generates COFF or ELF output, |
252b5132 | 2943 | @end ifset |
a4fb0134 | 2944 | @command{@value{AS}} can also generate whatever other named sections you specify |
252b5132 RH |
2945 | using the @samp{.section} directive (@pxref{Section,,@code{.section}}). |
2946 | If you do not use any directives that place output in the @samp{.text} | |
2947 | or @samp{.data} sections, these sections still exist, but are empty. | |
2948 | @end ifset | |
2949 | ||
2950 | @ifset HPPA | |
2951 | @ifset GENERIC | |
a4fb0134 | 2952 | When @command{@value{AS}} generates SOM or ELF output for the HPPA, |
252b5132 | 2953 | @end ifset |
a4fb0134 | 2954 | @command{@value{AS}} can also generate whatever other named sections you |
252b5132 RH |
2955 | specify using the @samp{.space} and @samp{.subspace} directives. See |
2956 | @cite{HP9000 Series 800 Assembly Language Reference Manual} | |
2957 | (HP 92432-90001) for details on the @samp{.space} and @samp{.subspace} | |
2958 | assembler directives. | |
2959 | ||
2960 | @ifset SOM | |
a4fb0134 | 2961 | Additionally, @command{@value{AS}} uses different names for the standard |
252b5132 RH |
2962 | text, data, and bss sections when generating SOM output. Program text |
2963 | is placed into the @samp{$CODE$} section, data into @samp{$DATA$}, and | |
2964 | BSS into @samp{$BSS$}. | |
2965 | @end ifset | |
2966 | @end ifset | |
2967 | ||
2968 | Within the object file, the text section starts at address @code{0}, the | |
2969 | data section follows, and the bss section follows the data section. | |
2970 | ||
2971 | @ifset HPPA | |
2972 | When generating either SOM or ELF output files on the HPPA, the text | |
2973 | section starts at address @code{0}, the data section at address | |
2974 | @code{0x4000000}, and the bss section follows the data section. | |
2975 | @end ifset | |
2976 | ||
2977 | To let @code{@value{LD}} know which data changes when the sections are | |
a4fb0134 | 2978 | relocated, and how to change that data, @command{@value{AS}} also writes to the |
252b5132 RH |
2979 | object file details of the relocation needed. To perform relocation |
2980 | @code{@value{LD}} must know, each time an address in the object | |
2981 | file is mentioned: | |
2982 | @itemize @bullet | |
2983 | @item | |
2984 | Where in the object file is the beginning of this reference to | |
2985 | an address? | |
2986 | @item | |
2987 | How long (in bytes) is this reference? | |
2988 | @item | |
2989 | Which section does the address refer to? What is the numeric value of | |
2990 | @display | |
2991 | (@var{address}) @minus{} (@var{start-address of section})? | |
2992 | @end display | |
2993 | @item | |
2994 | Is the reference to an address ``Program-Counter relative''? | |
2995 | @end itemize | |
2996 | ||
2997 | @cindex addresses, format of | |
2998 | @cindex section-relative addressing | |
a4fb0134 | 2999 | In fact, every address @command{@value{AS}} ever uses is expressed as |
252b5132 RH |
3000 | @display |
3001 | (@var{section}) + (@var{offset into section}) | |
3002 | @end display | |
3003 | @noindent | |
a4fb0134 | 3004 | Further, most expressions @command{@value{AS}} computes have this section-relative |
252b5132 RH |
3005 | nature. |
3006 | @ifset SOM | |
3007 | (For some object formats, such as SOM for the HPPA, some expressions are | |
3008 | symbol-relative instead.) | |
3009 | @end ifset | |
3010 | ||
3011 | In this manual we use the notation @{@var{secname} @var{N}@} to mean ``offset | |
3012 | @var{N} into section @var{secname}.'' | |
3013 | ||
3014 | Apart from text, data and bss sections you need to know about the | |
3015 | @dfn{absolute} section. When @code{@value{LD}} mixes partial programs, | |
3016 | addresses in the absolute section remain unchanged. For example, address | |
3017 | @code{@{absolute 0@}} is ``relocated'' to run-time address 0 by | |
3018 | @code{@value{LD}}. Although the linker never arranges two partial programs' | |
3019 | data sections with overlapping addresses after linking, @emph{by definition} | |
3020 | their absolute sections must overlap. Address @code{@{absolute@ 239@}} in one | |
3021 | part of a program is always the same address when the program is running as | |
3022 | address @code{@{absolute@ 239@}} in any other part of the program. | |
3023 | ||
3024 | The idea of sections is extended to the @dfn{undefined} section. Any | |
3025 | address whose section is unknown at assembly time is by definition | |
3026 | rendered @{undefined @var{U}@}---where @var{U} is filled in later. | |
3027 | Since numbers are always defined, the only way to generate an undefined | |
3028 | address is to mention an undefined symbol. A reference to a named | |
3029 | common block would be such a symbol: its value is unknown at assembly | |
3030 | time so it has section @emph{undefined}. | |
3031 | ||
3032 | By analogy the word @emph{section} is used to describe groups of sections in | |
3033 | the linked program. @code{@value{LD}} puts all partial programs' text | |
3034 | sections in contiguous addresses in the linked program. It is | |
3035 | customary to refer to the @emph{text section} of a program, meaning all | |
3036 | the addresses of all partial programs' text sections. Likewise for | |
3037 | data and bss sections. | |
3038 | ||
3039 | Some sections are manipulated by @code{@value{LD}}; others are invented for | |
a4fb0134 | 3040 | use of @command{@value{AS}} and have no meaning except during assembly. |
252b5132 RH |
3041 | |
3042 | @node Ld Sections | |
3043 | @section Linker Sections | |
3044 | @code{@value{LD}} deals with just four kinds of sections, summarized below. | |
3045 | ||
3046 | @table @strong | |
3047 | ||
c1253627 | 3048 | @ifset COFF-ELF |
252b5132 RH |
3049 | @cindex named sections |
3050 | @cindex sections, named | |
3051 | @item named sections | |
3052 | @end ifset | |
3053 | @ifset aout-bout | |
3054 | @cindex text section | |
3055 | @cindex data section | |
3056 | @itemx text section | |
3057 | @itemx data section | |
3058 | @end ifset | |
a4fb0134 | 3059 | These sections hold your program. @command{@value{AS}} and @code{@value{LD}} treat them as |
252b5132 | 3060 | separate but equal sections. Anything you can say of one section is |
c1253627 NC |
3061 | true of another. |
3062 | @c @ifset aout-bout | |
252b5132 RH |
3063 | When the program is running, however, it is |
3064 | customary for the text section to be unalterable. The | |
3065 | text section is often shared among processes: it contains | |
3066 | instructions, constants and the like. The data section of a running | |
3067 | program is usually alterable: for example, C variables would be stored | |
3068 | in the data section. | |
c1253627 | 3069 | @c @end ifset |
252b5132 RH |
3070 | |
3071 | @cindex bss section | |
3072 | @item bss section | |
3073 | This section contains zeroed bytes when your program begins running. It | |
a349d9dd | 3074 | is used to hold uninitialized variables or common storage. The length of |
252b5132 RH |
3075 | each partial program's bss section is important, but because it starts |
3076 | out containing zeroed bytes there is no need to store explicit zero | |
3077 | bytes in the object file. The bss section was invented to eliminate | |
3078 | those explicit zeros from object files. | |
3079 | ||
3080 | @cindex absolute section | |
3081 | @item absolute section | |
3082 | Address 0 of this section is always ``relocated'' to runtime address 0. | |
3083 | This is useful if you want to refer to an address that @code{@value{LD}} must | |
3084 | not change when relocating. In this sense we speak of absolute | |
3085 | addresses being ``unrelocatable'': they do not change during relocation. | |
3086 | ||
3087 | @cindex undefined section | |
3088 | @item undefined section | |
3089 | This ``section'' is a catch-all for address references to objects not in | |
3090 | the preceding sections. | |
3091 | @c FIXME: ref to some other doc on obj-file formats could go here. | |
3092 | @end table | |
3093 | ||
3094 | @cindex relocation example | |
3095 | An idealized example of three relocatable sections follows. | |
c1253627 | 3096 | @ifset COFF-ELF |
252b5132 RH |
3097 | The example uses the traditional section names @samp{.text} and @samp{.data}. |
3098 | @end ifset | |
3099 | Memory addresses are on the horizontal axis. | |
3100 | ||
3101 | @c TEXI2ROFF-KILL | |
c1253627 | 3102 | @ifnottex |
252b5132 RH |
3103 | @c END TEXI2ROFF-KILL |
3104 | @smallexample | |
3105 | +-----+----+--+ | |
3106 | partial program # 1: |ttttt|dddd|00| | |
3107 | +-----+----+--+ | |
3108 | ||
3109 | text data bss | |
3110 | seg. seg. seg. | |
3111 | ||
3112 | +---+---+---+ | |
3113 | partial program # 2: |TTT|DDD|000| | |
3114 | +---+---+---+ | |
3115 | ||
3116 | +--+---+-----+--+----+---+-----+~~ | |
3117 | linked program: | |TTT|ttttt| |dddd|DDD|00000| | |
3118 | +--+---+-----+--+----+---+-----+~~ | |
3119 | ||
3120 | addresses: 0 @dots{} | |
3121 | @end smallexample | |
3122 | @c TEXI2ROFF-KILL | |
c1253627 | 3123 | @end ifnottex |
252b5132 RH |
3124 | @need 5000 |
3125 | @tex | |
c1253627 | 3126 | \bigskip |
252b5132 RH |
3127 | \line{\it Partial program \#1: \hfil} |
3128 | \line{\ibox{2.5cm}{\tt text}\ibox{2cm}{\tt data}\ibox{1cm}{\tt bss}\hfil} | |
3129 | \line{\boxit{2.5cm}{\tt ttttt}\boxit{2cm}{\tt dddd}\boxit{1cm}{\tt 00}\hfil} | |
3130 | ||
3131 | \line{\it Partial program \#2: \hfil} | |
3132 | \line{\ibox{1cm}{\tt text}\ibox{1.5cm}{\tt data}\ibox{1cm}{\tt bss}\hfil} | |
3133 | \line{\boxit{1cm}{\tt TTT}\boxit{1.5cm}{\tt DDDD}\boxit{1cm}{\tt 000}\hfil} | |
3134 | ||
3135 | \line{\it linked program: \hfil} | |
3136 | \line{\ibox{.5cm}{}\ibox{1cm}{\tt text}\ibox{2.5cm}{}\ibox{.75cm}{}\ibox{2cm}{\tt data}\ibox{1.5cm}{}\ibox{2cm}{\tt bss}\hfil} | |
3137 | \line{\boxit{.5cm}{}\boxit{1cm}{\tt TTT}\boxit{2.5cm}{\tt | |
3138 | ttttt}\boxit{.75cm}{}\boxit{2cm}{\tt dddd}\boxit{1.5cm}{\tt | |
3139 | DDDD}\boxit{2cm}{\tt 00000}\ \dots\hfil} | |
3140 | ||
3141 | \line{\it addresses: \hfil} | |
3142 | \line{0\dots\hfil} | |
3143 | ||
3144 | @end tex | |
3145 | @c END TEXI2ROFF-KILL | |
3146 | ||
3147 | @node As Sections | |
3148 | @section Assembler Internal Sections | |
3149 | ||
3150 | @cindex internal assembler sections | |
3151 | @cindex sections in messages, internal | |
a4fb0134 | 3152 | These sections are meant only for the internal use of @command{@value{AS}}. They |
252b5132 | 3153 | have no meaning at run-time. You do not really need to know about these |
a4fb0134 | 3154 | sections for most purposes; but they can be mentioned in @command{@value{AS}} |
252b5132 | 3155 | warning messages, so it might be helpful to have an idea of their |
a4fb0134 | 3156 | meanings to @command{@value{AS}}. These sections are used to permit the |
252b5132 RH |
3157 | value of every expression in your assembly language program to be a |
3158 | section-relative address. | |
3159 | ||
3160 | @table @b | |
3161 | @cindex assembler internal logic error | |
3162 | @item ASSEMBLER-INTERNAL-LOGIC-ERROR! | |
3163 | An internal assembler logic error has been found. This means there is a | |
3164 | bug in the assembler. | |
3165 | ||
3166 | @cindex expr (internal section) | |
3167 | @item expr section | |
3168 | The assembler stores complex expression internally as combinations of | |
3169 | symbols. When it needs to represent an expression as a symbol, it puts | |
3170 | it in the expr section. | |
3171 | @c FIXME item debug | |
3172 | @c FIXME item transfer[t] vector preload | |
3173 | @c FIXME item transfer[t] vector postload | |
3174 | @c FIXME item register | |
3175 | @end table | |
3176 | ||
3177 | @node Sub-Sections | |
3178 | @section Sub-Sections | |
3179 | ||
3180 | @cindex numbered subsections | |
3181 | @cindex grouping data | |
3182 | @ifset aout-bout | |
3183 | Assembled bytes | |
c1253627 | 3184 | @ifset COFF-ELF |
252b5132 RH |
3185 | conventionally |
3186 | @end ifset | |
3187 | fall into two sections: text and data. | |
3188 | @end ifset | |
3189 | You may have separate groups of | |
3190 | @ifset GENERIC | |
3191 | data in named sections | |
3192 | @end ifset | |
3193 | @ifclear GENERIC | |
3194 | @ifclear aout-bout | |
3195 | data in named sections | |
3196 | @end ifclear | |
3197 | @ifset aout-bout | |
3198 | text or data | |
3199 | @end ifset | |
3200 | @end ifclear | |
3201 | that you want to end up near to each other in the object file, even though they | |
a4fb0134 | 3202 | are not contiguous in the assembler source. @command{@value{AS}} allows you to |
252b5132 RH |
3203 | use @dfn{subsections} for this purpose. Within each section, there can be |
3204 | numbered subsections with values from 0 to 8192. Objects assembled into the | |
3205 | same subsection go into the object file together with other objects in the same | |
3206 | subsection. For example, a compiler might want to store constants in the text | |
3207 | section, but might not want to have them interspersed with the program being | |
3208 | assembled. In this case, the compiler could issue a @samp{.text 0} before each | |
3209 | section of code being output, and a @samp{.text 1} before each group of | |
3210 | constants being output. | |
3211 | ||
3212 | Subsections are optional. If you do not use subsections, everything | |
3213 | goes in subsection number zero. | |
3214 | ||
3215 | @ifset GENERIC | |
3216 | Each subsection is zero-padded up to a multiple of four bytes. | |
3217 | (Subsections may be padded a different amount on different flavors | |
a4fb0134 | 3218 | of @command{@value{AS}}.) |
252b5132 RH |
3219 | @end ifset |
3220 | @ifclear GENERIC | |
3221 | @ifset H8 | |
7be1c489 | 3222 | On the H8/300 platform, each subsection is zero-padded to a word |
252b5132 | 3223 | boundary (two bytes). |
c2dcd04e | 3224 | The same is true on the Renesas SH. |
252b5132 RH |
3225 | @end ifset |
3226 | @ifset I960 | |
3227 | @c FIXME section padding (alignment)? | |
3228 | @c Rich Pixley says padding here depends on target obj code format; that | |
3229 | @c doesn't seem particularly useful to say without further elaboration, | |
3230 | @c so for now I say nothing about it. If this is a generic BFD issue, | |
3231 | @c these paragraphs might need to vanish from this manual, and be | |
3232 | @c discussed in BFD chapter of binutils (or some such). | |
3233 | @end ifset | |
252b5132 RH |
3234 | @end ifclear |
3235 | ||
3236 | Subsections appear in your object file in numeric order, lowest numbered | |
3237 | to highest. (All this to be compatible with other people's assemblers.) | |
3238 | The object file contains no representation of subsections; @code{@value{LD}} and | |
3239 | other programs that manipulate object files see no trace of them. | |
3240 | They just see all your text subsections as a text section, and all your | |
3241 | data subsections as a data section. | |
3242 | ||
3243 | To specify which subsection you want subsequent statements assembled | |
3244 | into, use a numeric argument to specify it, in a @samp{.text | |
3245 | @var{expression}} or a @samp{.data @var{expression}} statement. | |
ed9589d4 | 3246 | @ifset COFF |
252b5132 | 3247 | @ifset GENERIC |
ed9589d4 | 3248 | When generating COFF output, you |
252b5132 RH |
3249 | @end ifset |
3250 | @ifclear GENERIC | |
3251 | You | |
3252 | @end ifclear | |
3253 | can also use an extra subsection | |
3254 | argument with arbitrary named sections: @samp{.section @var{name}, | |
3255 | @var{expression}}. | |
3256 | @end ifset | |
ed9589d4 BW |
3257 | @ifset ELF |
3258 | @ifset GENERIC | |
3259 | When generating ELF output, you | |
3260 | @end ifset | |
3261 | @ifclear GENERIC | |
3262 | You | |
3263 | @end ifclear | |
3264 | can also use the @code{.subsection} directive (@pxref{SubSection}) | |
3265 | to specify a subsection: @samp{.subsection @var{expression}}. | |
3266 | @end ifset | |
96e9638b BW |
3267 | @var{Expression} should be an absolute expression |
3268 | (@pxref{Expressions}). If you just say @samp{.text} then @samp{.text 0} | |
252b5132 RH |
3269 | is assumed. Likewise @samp{.data} means @samp{.data 0}. Assembly |
3270 | begins in @code{text 0}. For instance: | |
3271 | @smallexample | |
3272 | .text 0 # The default subsection is text 0 anyway. | |
3273 | .ascii "This lives in the first text subsection. *" | |
3274 | .text 1 | |
3275 | .ascii "But this lives in the second text subsection." | |
3276 | .data 0 | |
3277 | .ascii "This lives in the data section," | |
3278 | .ascii "in the first data subsection." | |
3279 | .text 0 | |
3280 | .ascii "This lives in the first text section," | |
3281 | .ascii "immediately following the asterisk (*)." | |
3282 | @end smallexample | |
3283 | ||
3284 | Each section has a @dfn{location counter} incremented by one for every byte | |
3285 | assembled into that section. Because subsections are merely a convenience | |
a4fb0134 | 3286 | restricted to @command{@value{AS}} there is no concept of a subsection location |
252b5132 RH |
3287 | counter. There is no way to directly manipulate a location counter---but the |
3288 | @code{.align} directive changes it, and any label definition captures its | |
3289 | current value. The location counter of the section where statements are being | |
3290 | assembled is said to be the @dfn{active} location counter. | |
3291 | ||
3292 | @node bss | |
3293 | @section bss Section | |
3294 | ||
3295 | @cindex bss section | |
3296 | @cindex common variable storage | |
3297 | The bss section is used for local common variable storage. | |
3298 | You may allocate address space in the bss section, but you may | |
3299 | not dictate data to load into it before your program executes. When | |
3300 | your program starts running, all the contents of the bss | |
3301 | section are zeroed bytes. | |
3302 | ||
3303 | The @code{.lcomm} pseudo-op defines a symbol in the bss section; see | |
3304 | @ref{Lcomm,,@code{.lcomm}}. | |
3305 | ||
3306 | The @code{.comm} pseudo-op may be used to declare a common symbol, which is | |
96e9638b | 3307 | another form of uninitialized symbol; see @ref{Comm,,@code{.comm}}. |
252b5132 RH |
3308 | |
3309 | @ifset GENERIC | |
3310 | When assembling for a target which supports multiple sections, such as ELF or | |
3311 | COFF, you may switch into the @code{.bss} section and define symbols as usual; | |
3312 | see @ref{Section,,@code{.section}}. You may only assemble zero values into the | |
3313 | section. Typically the section will only contain symbol definitions and | |
3314 | @code{.skip} directives (@pxref{Skip,,@code{.skip}}). | |
3315 | @end ifset | |
3316 | ||
3317 | @node Symbols | |
3318 | @chapter Symbols | |
3319 | ||
3320 | @cindex symbols | |
3321 | Symbols are a central concept: the programmer uses symbols to name | |
3322 | things, the linker uses symbols to link, and the debugger uses symbols | |
3323 | to debug. | |
3324 | ||
3325 | @quotation | |
3326 | @cindex debuggers, and symbol order | |
a4fb0134 | 3327 | @emph{Warning:} @command{@value{AS}} does not place symbols in the object file in |
252b5132 RH |
3328 | the same order they were declared. This may break some debuggers. |
3329 | @end quotation | |
3330 | ||
3331 | @menu | |
3332 | * Labels:: Labels | |
3333 | * Setting Symbols:: Giving Symbols Other Values | |
3334 | * Symbol Names:: Symbol Names | |
3335 | * Dot:: The Special Dot Symbol | |
3336 | * Symbol Attributes:: Symbol Attributes | |
3337 | @end menu | |
3338 | ||
3339 | @node Labels | |
3340 | @section Labels | |
3341 | ||
3342 | @cindex labels | |
3343 | A @dfn{label} is written as a symbol immediately followed by a colon | |
3344 | @samp{:}. The symbol then represents the current value of the | |
3345 | active location counter, and is, for example, a suitable instruction | |
3346 | operand. You are warned if you use the same symbol to represent two | |
3347 | different locations: the first definition overrides any other | |
3348 | definitions. | |
3349 | ||
3350 | @ifset HPPA | |
3351 | On the HPPA, the usual form for a label need not be immediately followed by a | |
3352 | colon, but instead must start in column zero. Only one label may be defined on | |
a4fb0134 | 3353 | a single line. To work around this, the HPPA version of @command{@value{AS}} also |
252b5132 RH |
3354 | provides a special directive @code{.label} for defining labels more flexibly. |
3355 | @end ifset | |
3356 | ||
3357 | @node Setting Symbols | |
3358 | @section Giving Symbols Other Values | |
3359 | ||
3360 | @cindex assigning values to symbols | |
3361 | @cindex symbol values, assigning | |
3362 | A symbol can be given an arbitrary value by writing a symbol, followed | |
3363 | by an equals sign @samp{=}, followed by an expression | |
3364 | (@pxref{Expressions}). This is equivalent to using the @code{.set} | |
9497f5ac NC |
3365 | directive. @xref{Set,,@code{.set}}. In the same way, using a double |
3366 | equals sign @samp{=}@samp{=} here represents an equivalent of the | |
3367 | @code{.eqv} directive. @xref{Eqv,,@code{.eqv}}. | |
252b5132 | 3368 | |
f8739b83 JZ |
3369 | @ifset Blackfin |
3370 | Blackfin does not support symbol assignment with @samp{=}. | |
3371 | @end ifset | |
3372 | ||
252b5132 RH |
3373 | @node Symbol Names |
3374 | @section Symbol Names | |
3375 | ||
3376 | @cindex symbol names | |
3377 | @cindex names, symbol | |
3378 | @ifclear SPECIAL-SYMS | |
3379 | Symbol names begin with a letter or with one of @samp{._}. On most | |
3380 | machines, you can also use @code{$} in symbol names; exceptions are | |
3381 | noted in @ref{Machine Dependencies}. That character may be followed by any | |
96e9638b BW |
3382 | string of digits, letters, dollar signs (unless otherwise noted for a |
3383 | particular target machine), and underscores. | |
252b5132 | 3384 | @end ifclear |
252b5132 RH |
3385 | @ifset SPECIAL-SYMS |
3386 | @ifset H8 | |
3387 | Symbol names begin with a letter or with one of @samp{._}. On the | |
7be1c489 | 3388 | Renesas SH you can also use @code{$} in symbol names. That |
c2dcd04e NC |
3389 | character may be followed by any string of digits, letters, dollar signs (save |
3390 | on the H8/300), and underscores. | |
252b5132 RH |
3391 | @end ifset |
3392 | @end ifset | |
3393 | ||
3394 | Case of letters is significant: @code{foo} is a different symbol name | |
3395 | than @code{Foo}. | |
3396 | ||
3397 | Each symbol has exactly one name. Each name in an assembly language program | |
3398 | refers to exactly one symbol. You may use that symbol name any number of times | |
3399 | in a program. | |
3400 | ||
3401 | @subheading Local Symbol Names | |
3402 | ||
3403 | @cindex local symbol names | |
3404 | @cindex symbol names, local | |
ba83aca1 BW |
3405 | A local symbol is any symbol beginning with certain local label prefixes. |
3406 | By default, the local label prefix is @samp{.L} for ELF systems or | |
3407 | @samp{L} for traditional a.out systems, but each target may have its own | |
3408 | set of local label prefixes. | |
3409 | @ifset HPPA | |
3410 | On the HPPA local symbols begin with @samp{L$}. | |
3411 | @end ifset | |
3412 | ||
3413 | Local symbols are defined and used within the assembler, but they are | |
3414 | normally not saved in object files. Thus, they are not visible when debugging. | |
3415 | You may use the @samp{-L} option (@pxref{L, ,Include Local Symbols: | |
3416 | @option{-L}}) to retain the local symbols in the object files. | |
3417 | ||
3418 | @subheading Local Labels | |
3419 | ||
3420 | @cindex local labels | |
252b5132 RH |
3421 | @cindex temporary symbol names |
3422 | @cindex symbol names, temporary | |
ba83aca1 | 3423 | Local labels help compilers and programmers use names temporarily. |
2d5aaba0 NC |
3424 | They create symbols which are guaranteed to be unique over the entire scope of |
3425 | the input source code and which can be referred to by a simple notation. | |
ba83aca1 | 3426 | To define a local label, write a label of the form @samp{@b{N}:} (where @b{N} |
2d5aaba0 | 3427 | represents any positive integer). To refer to the most recent previous |
ba83aca1 | 3428 | definition of that label write @samp{@b{N}b}, using the same number as when |
2d5aaba0 | 3429 | you defined the label. To refer to the next definition of a local label, write |
96e9638b | 3430 | @samp{@b{N}f}---the @samp{b} stands for ``backwards'' and the @samp{f} stands |
2d5aaba0 NC |
3431 | for ``forwards''. |
3432 | ||
3433 | There is no restriction on how you can use these labels, and you can reuse them | |
3434 | too. So that it is possible to repeatedly define the same local label (using | |
3435 | the same number @samp{@b{N}}), although you can only refer to the most recently | |
3436 | defined local label of that number (for a backwards reference) or the next | |
3437 | definition of a specific local label for a forward reference. It is also worth | |
3438 | noting that the first 10 local labels (@samp{@b{0:}}@dots{}@samp{@b{9:}}) are | |
3439 | implemented in a slightly more efficient manner than the others. | |
3440 | ||
3441 | Here is an example: | |
3442 | ||
3443 | @smallexample | |
3444 | 1: branch 1f | |
3445 | 2: branch 1b | |
3446 | 1: branch 2f | |
3447 | 2: branch 1b | |
3448 | @end smallexample | |
3449 | ||
3450 | Which is the equivalent of: | |
3451 | ||
3452 | @smallexample | |
3453 | label_1: branch label_3 | |
3454 | label_2: branch label_1 | |
3455 | label_3: branch label_4 | |
3456 | label_4: branch label_3 | |
3457 | @end smallexample | |
3458 | ||
ba83aca1 | 3459 | Local label names are only a notational device. They are immediately |
2d5aaba0 | 3460 | transformed into more conventional symbol names before the assembler uses them. |
96e9638b BW |
3461 | The symbol names are stored in the symbol table, appear in error messages, and |
3462 | are optionally emitted to the object file. The names are constructed using | |
3463 | these parts: | |
252b5132 RH |
3464 | |
3465 | @table @code | |
ba83aca1 BW |
3466 | @item @emph{local label prefix} |
3467 | All local symbols begin with the system-specific local label prefix. | |
3468 | Normally both @command{@value{AS}} and @code{@value{LD}} forget symbols | |
3469 | that start with the local label prefix. These labels are | |
252b5132 | 3470 | used for symbols you are never intended to see. If you use the |
a4fb0134 | 3471 | @samp{-L} option then @command{@value{AS}} retains these symbols in the |
252b5132 RH |
3472 | object file. If you also instruct @code{@value{LD}} to retain these symbols, |
3473 | you may use them in debugging. | |
3474 | ||
2d5aaba0 NC |
3475 | @item @var{number} |
3476 | This is the number that was used in the local label definition. So if the | |
01642c12 | 3477 | label is written @samp{55:} then the number is @samp{55}. |
252b5132 | 3478 | |
2d5aaba0 NC |
3479 | @item @kbd{C-B} |
3480 | This unusual character is included so you do not accidentally invent a symbol | |
3481 | of the same name. The character has ASCII value of @samp{\002} (control-B). | |
252b5132 RH |
3482 | |
3483 | @item @emph{ordinal number} | |
2d5aaba0 | 3484 | This is a serial number to keep the labels distinct. The first definition of |
01642c12 | 3485 | @samp{0:} gets the number @samp{1}. The 15th definition of @samp{0:} gets the |
2d5aaba0 | 3486 | number @samp{15}, and so on. Likewise the first definition of @samp{1:} gets |
b45619c0 | 3487 | the number @samp{1} and its 15th definition gets @samp{15} as well. |
252b5132 RH |
3488 | @end table |
3489 | ||
ba83aca1 BW |
3490 | So for example, the first @code{1:} may be named @code{.L1@kbd{C-B}1}, and |
3491 | the 44th @code{3:} may be named @code{.L3@kbd{C-B}44}. | |
2d5aaba0 NC |
3492 | |
3493 | @subheading Dollar Local Labels | |
3494 | @cindex dollar local symbols | |
3495 | ||
3496 | @code{@value{AS}} also supports an even more local form of local labels called | |
96e9638b BW |
3497 | dollar labels. These labels go out of scope (i.e., they become undefined) as |
3498 | soon as a non-local label is defined. Thus they remain valid for only a small | |
2d5aaba0 NC |
3499 | region of the input source code. Normal local labels, by contrast, remain in |
3500 | scope for the entire file, or until they are redefined by another occurrence of | |
3501 | the same local label. | |
3502 | ||
3503 | Dollar labels are defined in exactly the same way as ordinary local labels, | |
77cca80f NC |
3504 | except that they have a dollar sign suffix to their numeric value, e.g., |
3505 | @samp{@b{55$:}}. | |
2d5aaba0 NC |
3506 | |
3507 | They can also be distinguished from ordinary local labels by their transformed | |
96e9638b BW |
3508 | names which use ASCII character @samp{\001} (control-A) as the magic character |
3509 | to distinguish them from ordinary labels. For example, the fifth definition of | |
ba83aca1 | 3510 | @samp{6$} may be named @samp{.L6@kbd{C-A}5}. |
252b5132 RH |
3511 | |
3512 | @node Dot | |
3513 | @section The Special Dot Symbol | |
3514 | ||
3515 | @cindex dot (symbol) | |
3516 | @cindex @code{.} (symbol) | |
3517 | @cindex current address | |
3518 | @cindex location counter | |
3519 | The special symbol @samp{.} refers to the current address that | |
a4fb0134 | 3520 | @command{@value{AS}} is assembling into. Thus, the expression @samp{melvin: |
252b5132 RH |
3521 | .long .} defines @code{melvin} to contain its own address. |
3522 | Assigning a value to @code{.} is treated the same as a @code{.org} | |
884f0d36 | 3523 | directive. |
252b5132 | 3524 | @ifclear no-space-dir |
884f0d36 | 3525 | Thus, the expression @samp{.=.+4} is the same as saying |
252b5132 RH |
3526 | @samp{.space 4}. |
3527 | @end ifclear | |
252b5132 RH |
3528 | |
3529 | @node Symbol Attributes | |
3530 | @section Symbol Attributes | |
3531 | ||
3532 | @cindex symbol attributes | |
3533 | @cindex attributes, symbol | |
3534 | Every symbol has, as well as its name, the attributes ``Value'' and | |
3535 | ``Type''. Depending on output format, symbols can also have auxiliary | |
3536 | attributes. | |
3537 | @ifset INTERNALS | |
3538 | The detailed definitions are in @file{a.out.h}. | |
3539 | @end ifset | |
3540 | ||
a4fb0134 | 3541 | If you use a symbol without defining it, @command{@value{AS}} assumes zero for |
252b5132 RH |
3542 | all these attributes, and probably won't warn you. This makes the |
3543 | symbol an externally defined symbol, which is generally what you | |
3544 | would want. | |
3545 | ||
3546 | @menu | |
3547 | * Symbol Value:: Value | |
3548 | * Symbol Type:: Type | |
3549 | @ifset aout-bout | |
3550 | @ifset GENERIC | |
3551 | * a.out Symbols:: Symbol Attributes: @code{a.out} | |
3552 | @end ifset | |
3553 | @ifclear GENERIC | |
3554 | @ifclear BOUT | |
3555 | * a.out Symbols:: Symbol Attributes: @code{a.out} | |
3556 | @end ifclear | |
3557 | @ifset BOUT | |
3558 | * a.out Symbols:: Symbol Attributes: @code{a.out}, @code{b.out} | |
3559 | @end ifset | |
3560 | @end ifclear | |
3561 | @end ifset | |
3562 | @ifset COFF | |
3563 | * COFF Symbols:: Symbol Attributes for COFF | |
3564 | @end ifset | |
3565 | @ifset SOM | |
3566 | * SOM Symbols:: Symbol Attributes for SOM | |
3567 | @end ifset | |
3568 | @end menu | |
3569 | ||
3570 | @node Symbol Value | |
3571 | @subsection Value | |
3572 | ||
3573 | @cindex value of a symbol | |
3574 | @cindex symbol value | |
3575 | The value of a symbol is (usually) 32 bits. For a symbol which labels a | |
3576 | location in the text, data, bss or absolute sections the value is the | |
3577 | number of addresses from the start of that section to the label. | |
3578 | Naturally for text, data and bss sections the value of a symbol changes | |
3579 | as @code{@value{LD}} changes section base addresses during linking. Absolute | |
3580 | symbols' values do not change during linking: that is why they are | |
3581 | called absolute. | |
3582 | ||
3583 | The value of an undefined symbol is treated in a special way. If it is | |
3584 | 0 then the symbol is not defined in this assembler source file, and | |
3585 | @code{@value{LD}} tries to determine its value from other files linked into the | |
3586 | same program. You make this kind of symbol simply by mentioning a symbol | |
3587 | name without defining it. A non-zero value represents a @code{.comm} | |
3588 | common declaration. The value is how much common storage to reserve, in | |
3589 | bytes (addresses). The symbol refers to the first address of the | |
3590 | allocated storage. | |
3591 | ||
3592 | @node Symbol Type | |
3593 | @subsection Type | |
3594 | ||
3595 | @cindex type of a symbol | |
3596 | @cindex symbol type | |
3597 | The type attribute of a symbol contains relocation (section) | |
3598 | information, any flag settings indicating that a symbol is external, and | |
3599 | (optionally), other information for linkers and debuggers. The exact | |
3600 | format depends on the object-code output format in use. | |
3601 | ||
3602 | @ifset aout-bout | |
3603 | @ifclear GENERIC | |
3604 | @ifset BOUT | |
3605 | @c The following avoids a "widow" subsection title. @group would be | |
3606 | @c better if it were available outside examples. | |
3607 | @need 1000 | |
3608 | @node a.out Symbols | |
3609 | @subsection Symbol Attributes: @code{a.out}, @code{b.out} | |
3610 | ||
3611 | @cindex @code{b.out} symbol attributes | |
3612 | @cindex symbol attributes, @code{b.out} | |
a4fb0134 | 3613 | These symbol attributes appear only when @command{@value{AS}} is configured for |
252b5132 RH |
3614 | one of the Berkeley-descended object output formats---@code{a.out} or |
3615 | @code{b.out}. | |
3616 | ||
3617 | @end ifset | |
3618 | @ifclear BOUT | |
3619 | @node a.out Symbols | |
3620 | @subsection Symbol Attributes: @code{a.out} | |
3621 | ||
3622 | @cindex @code{a.out} symbol attributes | |
3623 | @cindex symbol attributes, @code{a.out} | |
3624 | ||
3625 | @end ifclear | |
3626 | @end ifclear | |
3627 | @ifset GENERIC | |
3628 | @node a.out Symbols | |
3629 | @subsection Symbol Attributes: @code{a.out} | |
3630 | ||
3631 | @cindex @code{a.out} symbol attributes | |
3632 | @cindex symbol attributes, @code{a.out} | |
3633 | ||
3634 | @end ifset | |
3635 | @menu | |
3636 | * Symbol Desc:: Descriptor | |
3637 | * Symbol Other:: Other | |
3638 | @end menu | |
3639 | ||
3640 | @node Symbol Desc | |
3641 | @subsubsection Descriptor | |
3642 | ||
3643 | @cindex descriptor, of @code{a.out} symbol | |
3644 | This is an arbitrary 16-bit value. You may establish a symbol's | |
3645 | descriptor value by using a @code{.desc} statement | |
3646 | (@pxref{Desc,,@code{.desc}}). A descriptor value means nothing to | |
a4fb0134 | 3647 | @command{@value{AS}}. |
252b5132 RH |
3648 | |
3649 | @node Symbol Other | |
3650 | @subsubsection Other | |
3651 | ||
3652 | @cindex other attribute, of @code{a.out} symbol | |
a4fb0134 | 3653 | This is an arbitrary 8-bit value. It means nothing to @command{@value{AS}}. |
252b5132 RH |
3654 | @end ifset |
3655 | ||
3656 | @ifset COFF | |
3657 | @node COFF Symbols | |
3658 | @subsection Symbol Attributes for COFF | |
3659 | ||
3660 | @cindex COFF symbol attributes | |
3661 | @cindex symbol attributes, COFF | |
3662 | ||
3663 | The COFF format supports a multitude of auxiliary symbol attributes; | |
3664 | like the primary symbol attributes, they are set between @code{.def} and | |
3665 | @code{.endef} directives. | |
3666 | ||
3667 | @subsubsection Primary Attributes | |
3668 | ||
3669 | @cindex primary attributes, COFF symbols | |
3670 | The symbol name is set with @code{.def}; the value and type, | |
3671 | respectively, with @code{.val} and @code{.type}. | |
3672 | ||
3673 | @subsubsection Auxiliary Attributes | |
3674 | ||
3675 | @cindex auxiliary attributes, COFF symbols | |
a4fb0134 | 3676 | The @command{@value{AS}} directives @code{.dim}, @code{.line}, @code{.scl}, |
c87db184 CF |
3677 | @code{.size}, @code{.tag}, and @code{.weak} can generate auxiliary symbol |
3678 | table information for COFF. | |
252b5132 RH |
3679 | @end ifset |
3680 | ||
3681 | @ifset SOM | |
3682 | @node SOM Symbols | |
3683 | @subsection Symbol Attributes for SOM | |
3684 | ||
3685 | @cindex SOM symbol attributes | |
3686 | @cindex symbol attributes, SOM | |
3687 | ||
3688 | The SOM format for the HPPA supports a multitude of symbol attributes set with | |
3689 | the @code{.EXPORT} and @code{.IMPORT} directives. | |
3690 | ||
01642c12 | 3691 | The attributes are described in @cite{HP9000 Series 800 Assembly |
252b5132 RH |
3692 | Language Reference Manual} (HP 92432-90001) under the @code{IMPORT} and |
3693 | @code{EXPORT} assembler directive documentation. | |
3694 | @end ifset | |
3695 | ||
3696 | @node Expressions | |
3697 | @chapter Expressions | |
3698 | ||
3699 | @cindex expressions | |
3700 | @cindex addresses | |
3701 | @cindex numeric values | |
3702 | An @dfn{expression} specifies an address or numeric value. | |
3703 | Whitespace may precede and/or follow an expression. | |
3704 | ||
3705 | The result of an expression must be an absolute number, or else an offset into | |
3706 | a particular section. If an expression is not absolute, and there is not | |
a4fb0134 | 3707 | enough information when @command{@value{AS}} sees the expression to know its |
252b5132 RH |
3708 | section, a second pass over the source program might be necessary to interpret |
3709 | the expression---but the second pass is currently not implemented. | |
a4fb0134 | 3710 | @command{@value{AS}} aborts with an error message in this situation. |
252b5132 RH |
3711 | |
3712 | @menu | |
3713 | * Empty Exprs:: Empty Expressions | |
3714 | * Integer Exprs:: Integer Expressions | |
3715 | @end menu | |
3716 | ||
3717 | @node Empty Exprs | |
3718 | @section Empty Expressions | |
3719 | ||
3720 | @cindex empty expressions | |
3721 | @cindex expressions, empty | |
3722 | An empty expression has no value: it is just whitespace or null. | |
3723 | Wherever an absolute expression is required, you may omit the | |
a4fb0134 | 3724 | expression, and @command{@value{AS}} assumes a value of (absolute) 0. This |
252b5132 RH |
3725 | is compatible with other assemblers. |
3726 | ||
3727 | @node Integer Exprs | |
3728 | @section Integer Expressions | |
3729 | ||
3730 | @cindex integer expressions | |
3731 | @cindex expressions, integer | |
3732 | An @dfn{integer expression} is one or more @emph{arguments} delimited | |
3733 | by @emph{operators}. | |
3734 | ||
3735 | @menu | |
3736 | * Arguments:: Arguments | |
3737 | * Operators:: Operators | |
3738 | * Prefix Ops:: Prefix Operators | |
3739 | * Infix Ops:: Infix Operators | |
3740 | @end menu | |
3741 | ||
3742 | @node Arguments | |
3743 | @subsection Arguments | |
3744 | ||
3745 | @cindex expression arguments | |
3746 | @cindex arguments in expressions | |
3747 | @cindex operands in expressions | |
3748 | @cindex arithmetic operands | |
3749 | @dfn{Arguments} are symbols, numbers or subexpressions. In other | |
3750 | contexts arguments are sometimes called ``arithmetic operands''. In | |
3751 | this manual, to avoid confusing them with the ``instruction operands'' of | |
3752 | the machine language, we use the term ``argument'' to refer to parts of | |
3753 | expressions only, reserving the word ``operand'' to refer only to machine | |
3754 | instruction operands. | |
3755 | ||
3756 | Symbols are evaluated to yield @{@var{section} @var{NNN}@} where | |
3757 | @var{section} is one of text, data, bss, absolute, | |
3758 | or undefined. @var{NNN} is a signed, 2's complement 32 bit | |
3759 | integer. | |
3760 | ||
3761 | Numbers are usually integers. | |
3762 | ||
3763 | A number can be a flonum or bignum. In this case, you are warned | |
a4fb0134 | 3764 | that only the low order 32 bits are used, and @command{@value{AS}} pretends |
252b5132 RH |
3765 | these 32 bits are an integer. You may write integer-manipulating |
3766 | instructions that act on exotic constants, compatible with other | |
3767 | assemblers. | |
3768 | ||
3769 | @cindex subexpressions | |
3770 | Subexpressions are a left parenthesis @samp{(} followed by an integer | |
3771 | expression, followed by a right parenthesis @samp{)}; or a prefix | |
3772 | operator followed by an argument. | |
3773 | ||
3774 | @node Operators | |
3775 | @subsection Operators | |
3776 | ||
3777 | @cindex operators, in expressions | |
3778 | @cindex arithmetic functions | |
3779 | @cindex functions, in expressions | |
3780 | @dfn{Operators} are arithmetic functions, like @code{+} or @code{%}. Prefix | |
3781 | operators are followed by an argument. Infix operators appear | |
3782 | between their arguments. Operators may be preceded and/or followed by | |
3783 | whitespace. | |
3784 | ||
3785 | @node Prefix Ops | |
3786 | @subsection Prefix Operator | |
3787 | ||
3788 | @cindex prefix operators | |
a4fb0134 | 3789 | @command{@value{AS}} has the following @dfn{prefix operators}. They each take |
252b5132 RH |
3790 | one argument, which must be absolute. |
3791 | ||
3792 | @c the tex/end tex stuff surrounding this small table is meant to make | |
3793 | @c it align, on the printed page, with the similar table in the next | |
3794 | @c section (which is inside an enumerate). | |
3795 | @tex | |
3796 | \global\advance\leftskip by \itemindent | |
3797 | @end tex | |
3798 | ||
3799 | @table @code | |
3800 | @item - | |
3801 | @dfn{Negation}. Two's complement negation. | |
3802 | @item ~ | |
3803 | @dfn{Complementation}. Bitwise not. | |
3804 | @end table | |
3805 | ||
3806 | @tex | |
3807 | \global\advance\leftskip by -\itemindent | |
3808 | @end tex | |
3809 | ||
3810 | @node Infix Ops | |
3811 | @subsection Infix Operators | |
3812 | ||
3813 | @cindex infix operators | |
3814 | @cindex operators, permitted arguments | |
3815 | @dfn{Infix operators} take two arguments, one on either side. Operators | |
3816 | have precedence, but operations with equal precedence are performed left | |
a4fb0134 | 3817 | to right. Apart from @code{+} or @option{-}, both arguments must be |
252b5132 RH |
3818 | absolute, and the result is absolute. |
3819 | ||
3820 | @enumerate | |
3821 | @cindex operator precedence | |
3822 | @cindex precedence of operators | |
3823 | ||
3824 | @item | |
3825 | Highest Precedence | |
3826 | ||
3827 | @table @code | |
3828 | @item * | |
3829 | @dfn{Multiplication}. | |
3830 | ||
3831 | @item / | |
3832 | @dfn{Division}. Truncation is the same as the C operator @samp{/} | |
3833 | ||
3834 | @item % | |
3835 | @dfn{Remainder}. | |
3836 | ||
d1eac9d9 | 3837 | @item << |
252b5132 RH |
3838 | @dfn{Shift Left}. Same as the C operator @samp{<<}. |
3839 | ||
d1eac9d9 | 3840 | @item >> |
252b5132 RH |
3841 | @dfn{Shift Right}. Same as the C operator @samp{>>}. |
3842 | @end table | |
3843 | ||
3844 | @item | |
3845 | Intermediate precedence | |
3846 | ||
3847 | @table @code | |
3848 | @item | | |
3849 | ||
3850 | @dfn{Bitwise Inclusive Or}. | |
3851 | ||
3852 | @item & | |
3853 | @dfn{Bitwise And}. | |
3854 | ||
3855 | @item ^ | |
3856 | @dfn{Bitwise Exclusive Or}. | |
3857 | ||
3858 | @item ! | |
3859 | @dfn{Bitwise Or Not}. | |
3860 | @end table | |
3861 | ||
3862 | @item | |
b131d4dc | 3863 | Low Precedence |
252b5132 RH |
3864 | |
3865 | @table @code | |
3866 | @cindex addition, permitted arguments | |
3867 | @cindex plus, permitted arguments | |
3868 | @cindex arguments for addition | |
3869 | @item + | |
3870 | @dfn{Addition}. If either argument is absolute, the result has the section of | |
3871 | the other argument. You may not add together arguments from different | |
3872 | sections. | |
3873 | ||
3874 | @cindex subtraction, permitted arguments | |
3875 | @cindex minus, permitted arguments | |
3876 | @cindex arguments for subtraction | |
3877 | @item - | |
3878 | @dfn{Subtraction}. If the right argument is absolute, the | |
3879 | result has the section of the left argument. | |
3880 | If both arguments are in the same section, the result is absolute. | |
3881 | You may not subtract arguments from different sections. | |
3882 | @c FIXME is there still something useful to say about undefined - undefined ? | |
b131d4dc NC |
3883 | |
3884 | @cindex comparison expressions | |
3885 | @cindex expressions, comparison | |
3886 | @item == | |
3887 | @dfn{Is Equal To} | |
3888 | @item <> | |
723a8472 | 3889 | @itemx != |
b131d4dc NC |
3890 | @dfn{Is Not Equal To} |
3891 | @item < | |
3892 | @dfn{Is Less Than} | |
d1eac9d9 | 3893 | @item > |
b131d4dc | 3894 | @dfn{Is Greater Than} |
d1eac9d9 | 3895 | @item >= |
b131d4dc | 3896 | @dfn{Is Greater Than Or Equal To} |
d1eac9d9 | 3897 | @item <= |
b131d4dc NC |
3898 | @dfn{Is Less Than Or Equal To} |
3899 | ||
3900 | The comparison operators can be used as infix operators. A true results has a | |
3901 | value of -1 whereas a false result has a value of 0. Note, these operators | |
3902 | perform signed comparisons. | |
3903 | @end table | |
3904 | ||
3905 | @item Lowest Precedence | |
3906 | ||
3907 | @table @code | |
3908 | @item && | |
3909 | @dfn{Logical And}. | |
3910 | ||
3911 | @item || | |
3912 | @dfn{Logical Or}. | |
3913 | ||
3914 | These two logical operations can be used to combine the results of sub | |
3915 | expressions. Note, unlike the comparison operators a true result returns a | |
3916 | value of 1 but a false results does still return 0. Also note that the logical | |
3917 | or operator has a slightly lower precedence than logical and. | |
3918 | ||
252b5132 RH |
3919 | @end table |
3920 | @end enumerate | |
3921 | ||
3922 | In short, it's only meaningful to add or subtract the @emph{offsets} in an | |
3923 | address; you can only have a defined section in one of the two arguments. | |
3924 | ||
3925 | @node Pseudo Ops | |
3926 | @chapter Assembler Directives | |
3927 | ||
3928 | @cindex directives, machine independent | |
3929 | @cindex pseudo-ops, machine independent | |
3930 | @cindex machine independent directives | |
3931 | All assembler directives have names that begin with a period (@samp{.}). | |
3932 | The rest of the name is letters, usually in lower case. | |
3933 | ||
3934 | This chapter discusses directives that are available regardless of the | |
3935 | target machine configuration for the @sc{gnu} assembler. | |
3936 | @ifset GENERIC | |
3937 | Some machine configurations provide additional directives. | |
3938 | @xref{Machine Dependencies}. | |
3939 | @end ifset | |
3940 | @ifclear GENERIC | |
3941 | @ifset machine-directives | |
96e9638b | 3942 | @xref{Machine Dependencies}, for additional directives. |
252b5132 RH |
3943 | @end ifset |
3944 | @end ifclear | |
3945 | ||
3946 | @menu | |
3947 | * Abort:: @code{.abort} | |
3948 | @ifset COFF | |
38a57ae7 | 3949 | * ABORT (COFF):: @code{.ABORT} |
252b5132 | 3950 | @end ifset |
f0dc282c | 3951 | |
252b5132 | 3952 | * Align:: @code{.align @var{abs-expr} , @var{abs-expr}} |
caa32fe5 | 3953 | * Altmacro:: @code{.altmacro} |
252b5132 RH |
3954 | * Ascii:: @code{.ascii "@var{string}"}@dots{} |
3955 | * Asciz:: @code{.asciz "@var{string}"}@dots{} | |
3956 | * Balign:: @code{.balign @var{abs-expr} , @var{abs-expr}} | |
3957 | * Byte:: @code{.byte @var{expressions}} | |
4b7d318b | 3958 | * CFI directives:: @code{.cfi_startproc [simple]}, @code{.cfi_endproc}, etc. |
ccf8a69b | 3959 | * Comm:: @code{.comm @var{symbol} , @var{length} } |
252b5132 RH |
3960 | * Data:: @code{.data @var{subsection}} |
3961 | @ifset COFF | |
3962 | * Def:: @code{.def @var{name}} | |
3963 | @end ifset | |
3964 | @ifset aout-bout | |
3965 | * Desc:: @code{.desc @var{symbol}, @var{abs-expression}} | |
3966 | @end ifset | |
3967 | @ifset COFF | |
3968 | * Dim:: @code{.dim} | |
3969 | @end ifset | |
f0dc282c | 3970 | |
252b5132 RH |
3971 | * Double:: @code{.double @var{flonums}} |
3972 | * Eject:: @code{.eject} | |
3973 | * Else:: @code{.else} | |
3fd9f047 | 3974 | * Elseif:: @code{.elseif} |
252b5132 RH |
3975 | * End:: @code{.end} |
3976 | @ifset COFF | |
3977 | * Endef:: @code{.endef} | |
3978 | @end ifset | |
f0dc282c | 3979 | |
252b5132 RH |
3980 | * Endfunc:: @code{.endfunc} |
3981 | * Endif:: @code{.endif} | |
3982 | * Equ:: @code{.equ @var{symbol}, @var{expression}} | |
3983 | * Equiv:: @code{.equiv @var{symbol}, @var{expression}} | |
9497f5ac | 3984 | * Eqv:: @code{.eqv @var{symbol}, @var{expression}} |
252b5132 | 3985 | * Err:: @code{.err} |
d190d046 | 3986 | * Error:: @code{.error @var{string}} |
252b5132 RH |
3987 | * Exitm:: @code{.exitm} |
3988 | * Extern:: @code{.extern} | |
3989 | * Fail:: @code{.fail} | |
14082c76 | 3990 | * File:: @code{.file} |
252b5132 RH |
3991 | * Fill:: @code{.fill @var{repeat} , @var{size} , @var{value}} |
3992 | * Float:: @code{.float @var{flonums}} | |
01642c12 | 3993 | * Func:: @code{.func} |
252b5132 | 3994 | * Global:: @code{.global @var{symbol}}, @code{.globl @var{symbol}} |
c91d2e08 | 3995 | @ifset ELF |
3a99f02f | 3996 | * Gnu_attribute:: @code{.gnu_attribute @var{tag},@var{value}} |
c91d2e08 NC |
3997 | * Hidden:: @code{.hidden @var{names}} |
3998 | @end ifset | |
f0dc282c | 3999 | |
252b5132 RH |
4000 | * hword:: @code{.hword @var{expressions}} |
4001 | * Ident:: @code{.ident} | |
4002 | * If:: @code{.if @var{absolute expression}} | |
7e005732 | 4003 | * Incbin:: @code{.incbin "@var{file}"[,@var{skip}[,@var{count}]]} |
252b5132 RH |
4004 | * Include:: @code{.include "@var{file}"} |
4005 | * Int:: @code{.int @var{expressions}} | |
c91d2e08 NC |
4006 | @ifset ELF |
4007 | * Internal:: @code{.internal @var{names}} | |
4008 | @end ifset | |
f0dc282c | 4009 | |
252b5132 RH |
4010 | * Irp:: @code{.irp @var{symbol},@var{values}}@dots{} |
4011 | * Irpc:: @code{.irpc @var{symbol},@var{values}}@dots{} | |
4012 | * Lcomm:: @code{.lcomm @var{symbol} , @var{length}} | |
4013 | * Lflags:: @code{.lflags} | |
4014 | @ifclear no-line-dir | |
4015 | * Line:: @code{.line @var{line-number}} | |
4016 | @end ifclear | |
f0dc282c | 4017 | |
252b5132 RH |
4018 | * Linkonce:: @code{.linkonce [@var{type}]} |
4019 | * List:: @code{.list} | |
bd0eb99b | 4020 | * Ln:: @code{.ln @var{line-number}} |
14082c76 BW |
4021 | * Loc:: @code{.loc @var{fileno} @var{lineno}} |
4022 | * Loc_mark_labels:: @code{.loc_mark_labels @var{enable}} | |
4d4175af BW |
4023 | @ifset ELF |
4024 | * Local:: @code{.local @var{names}} | |
4025 | @end ifset | |
bd0eb99b | 4026 | |
252b5132 RH |
4027 | * Long:: @code{.long @var{expressions}} |
4028 | @ignore | |
4029 | * Lsym:: @code{.lsym @var{symbol}, @var{expression}} | |
4030 | @end ignore | |
f0dc282c | 4031 | |
252b5132 RH |
4032 | * Macro:: @code{.macro @var{name} @var{args}}@dots{} |
4033 | * MRI:: @code{.mri @var{val}} | |
caa32fe5 | 4034 | * Noaltmacro:: @code{.noaltmacro} |
252b5132 RH |
4035 | * Nolist:: @code{.nolist} |
4036 | * Octa:: @code{.octa @var{bignums}} | |
85234291 L |
4037 | * Org:: @code{.org @var{new-lc}, @var{fill}} |
4038 | * P2align:: @code{.p2align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}} | |
c91d2e08 NC |
4039 | @ifset ELF |
4040 | * PopSection:: @code{.popsection} | |
4041 | * Previous:: @code{.previous} | |
4042 | @end ifset | |
f0dc282c | 4043 | |
252b5132 | 4044 | * Print:: @code{.print @var{string}} |
c91d2e08 NC |
4045 | @ifset ELF |
4046 | * Protected:: @code{.protected @var{names}} | |
4047 | @end ifset | |
f0dc282c | 4048 | |
252b5132 RH |
4049 | * Psize:: @code{.psize @var{lines}, @var{columns}} |
4050 | * Purgem:: @code{.purgem @var{name}} | |
c91d2e08 NC |
4051 | @ifset ELF |
4052 | * PushSection:: @code{.pushsection @var{name}} | |
4053 | @end ifset | |
f0dc282c | 4054 | |
252b5132 | 4055 | * Quad:: @code{.quad @var{bignums}} |
05e9452c | 4056 | * Reloc:: @code{.reloc @var{offset}, @var{reloc_name}[, @var{expression}]} |
252b5132 RH |
4057 | * Rept:: @code{.rept @var{count}} |
4058 | * Sbttl:: @code{.sbttl "@var{subheading}"} | |
4059 | @ifset COFF | |
4060 | * Scl:: @code{.scl @var{class}} | |
c1253627 NC |
4061 | @end ifset |
4062 | @ifset COFF-ELF | |
7337fc21 | 4063 | * Section:: @code{.section @var{name}[, @var{flags}]} |
252b5132 | 4064 | @end ifset |
f0dc282c | 4065 | |
252b5132 RH |
4066 | * Set:: @code{.set @var{symbol}, @var{expression}} |
4067 | * Short:: @code{.short @var{expressions}} | |
4068 | * Single:: @code{.single @var{flonums}} | |
c1253627 | 4069 | @ifset COFF-ELF |
c91d2e08 | 4070 | * Size:: @code{.size [@var{name} , @var{expression}]} |
c1253627 | 4071 | @end ifset |
884f0d36 | 4072 | @ifclear no-space-dir |
252b5132 | 4073 | * Skip:: @code{.skip @var{size} , @var{fill}} |
884f0d36 BW |
4074 | @end ifclear |
4075 | ||
252b5132 | 4076 | * Sleb128:: @code{.sleb128 @var{expressions}} |
884f0d36 | 4077 | @ifclear no-space-dir |
252b5132 | 4078 | * Space:: @code{.space @var{size} , @var{fill}} |
884f0d36 | 4079 | @end ifclear |
252b5132 RH |
4080 | @ifset have-stabs |
4081 | * Stab:: @code{.stabd, .stabn, .stabs} | |
4082 | @end ifset | |
f0dc282c | 4083 | |
38a57ae7 | 4084 | * String:: @code{.string "@var{str}"}, @code{.string8 "@var{str}"}, @code{.string16 "@var{str}"}, @code{.string32 "@var{str}"}, @code{.string64 "@var{str}"} |
252b5132 RH |
4085 | * Struct:: @code{.struct @var{expression}} |
4086 | @ifset ELF | |
c91d2e08 | 4087 | * SubSection:: @code{.subsection} |
252b5132 RH |
4088 | * Symver:: @code{.symver @var{name},@var{name2@@nodename}} |
4089 | @end ifset | |
f0dc282c | 4090 | |
252b5132 RH |
4091 | @ifset COFF |
4092 | * Tag:: @code{.tag @var{structname}} | |
4093 | @end ifset | |
f0dc282c | 4094 | |
252b5132 RH |
4095 | * Text:: @code{.text @var{subsection}} |
4096 | * Title:: @code{.title "@var{heading}"} | |
c1253627 | 4097 | @ifset COFF-ELF |
c91d2e08 | 4098 | * Type:: @code{.type <@var{int} | @var{name} , @var{type description}>} |
c1253627 NC |
4099 | @end ifset |
4100 | ||
c91d2e08 | 4101 | * Uleb128:: @code{.uleb128 @var{expressions}} |
252b5132 | 4102 | @ifset COFF |
252b5132 RH |
4103 | * Val:: @code{.val @var{addr}} |
4104 | @end ifset | |
f0dc282c | 4105 | |
2e13b764 | 4106 | @ifset ELF |
c91d2e08 | 4107 | * Version:: @code{.version "@var{string}"} |
c91d2e08 NC |
4108 | * VTableEntry:: @code{.vtable_entry @var{table}, @var{offset}} |
4109 | * VTableInherit:: @code{.vtable_inherit @var{child}, @var{parent}} | |
2e13b764 | 4110 | @end ifset |
f0dc282c | 4111 | |
d190d046 | 4112 | * Warning:: @code{.warning @var{string}} |
c87db184 | 4113 | * Weak:: @code{.weak @var{names}} |
06e77878 | 4114 | * Weakref:: @code{.weakref @var{alias}, @var{symbol}} |
252b5132 RH |
4115 | * Word:: @code{.word @var{expressions}} |
4116 | * Deprecated:: Deprecated Directives | |
4117 | @end menu | |
4118 | ||
4119 | @node Abort | |
4120 | @section @code{.abort} | |
4121 | ||
4122 | @cindex @code{abort} directive | |
4123 | @cindex stopping the assembly | |
4124 | This directive stops the assembly immediately. It is for | |
4125 | compatibility with other assemblers. The original idea was that the | |
4126 | assembly language source would be piped into the assembler. If the sender | |
a4fb0134 | 4127 | of the source quit, it could use this directive tells @command{@value{AS}} to |
252b5132 RH |
4128 | quit also. One day @code{.abort} will not be supported. |
4129 | ||
4130 | @ifset COFF | |
370b66a1 CD |
4131 | @node ABORT (COFF) |
4132 | @section @code{.ABORT} (COFF) | |
252b5132 RH |
4133 | |
4134 | @cindex @code{ABORT} directive | |
a4fb0134 | 4135 | When producing COFF output, @command{@value{AS}} accepts this directive as a |
252b5132 RH |
4136 | synonym for @samp{.abort}. |
4137 | ||
4138 | @ifset BOUT | |
a4fb0134 | 4139 | When producing @code{b.out} output, @command{@value{AS}} accepts this directive, |
252b5132 RH |
4140 | but ignores it. |
4141 | @end ifset | |
4142 | @end ifset | |
4143 | ||
4144 | @node Align | |
4145 | @section @code{.align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}} | |
4146 | ||
4147 | @cindex padding the location counter | |
4148 | @cindex @code{align} directive | |
4149 | Pad the location counter (in the current subsection) to a particular storage | |
4150 | boundary. The first expression (which must be absolute) is the alignment | |
4151 | required, as described below. | |
4152 | ||
4153 | The second expression (also absolute) gives the fill value to be stored in the | |
4154 | padding bytes. It (and the comma) may be omitted. If it is omitted, the | |
4155 | padding bytes are normally zero. However, on some systems, if the section is | |
4156 | marked as containing code and the fill value is omitted, the space is filled | |
4157 | with no-op instructions. | |
4158 | ||
4159 | The third expression is also absolute, and is also optional. If it is present, | |
4160 | it is the maximum number of bytes that should be skipped by this alignment | |
4161 | directive. If doing the alignment would require skipping more bytes than the | |
4162 | specified maximum, then the alignment is not done at all. You can omit the | |
4163 | fill value (the second argument) entirely by simply using two commas after the | |
4164 | required alignment; this can be useful if you want the alignment to be filled | |
4165 | with no-op instructions when appropriate. | |
4166 | ||
4167 | The way the required alignment is specified varies from system to system. | |
7be1c489 | 4168 | For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32, |
60946ad0 | 4169 | s390, sparc, tic4x, tic80 and xtensa, the first expression is the |
252b5132 RH |
4170 | alignment request in bytes. For example @samp{.align 8} advances |
4171 | the location counter until it is a multiple of 8. If the location counter | |
60946ad0 AM |
4172 | is already a multiple of 8, no change is needed. For the tic54x, the |
4173 | first expression is the alignment request in words. | |
252b5132 | 4174 | |
9e9a9798 | 4175 | For other systems, including ppc, i386 using a.out format, arm and |
adcf07e6 | 4176 | strongarm, it is the |
252b5132 RH |
4177 | number of low-order zero bits the location counter must have after |
4178 | advancement. For example @samp{.align 3} advances the location | |
4179 | counter until it a multiple of 8. If the location counter is already a | |
4180 | multiple of 8, no change is needed. | |
4181 | ||
4182 | This inconsistency is due to the different behaviors of the various | |
4183 | native assemblers for these systems which GAS must emulate. | |
4184 | GAS also provides @code{.balign} and @code{.p2align} directives, | |
4185 | described later, which have a consistent behavior across all | |
4186 | architectures (but are specific to GAS). | |
4187 | ||
ccf8a69b BW |
4188 | @node Altmacro |
4189 | @section @code{.altmacro} | |
4190 | Enable alternate macro mode, enabling: | |
4191 | ||
4192 | @ftable @code | |
4193 | @item LOCAL @var{name} [ , @dots{} ] | |
4194 | One additional directive, @code{LOCAL}, is available. It is used to | |
4195 | generate a string replacement for each of the @var{name} arguments, and | |
4196 | replace any instances of @var{name} in each macro expansion. The | |
4197 | replacement string is unique in the assembly, and different for each | |
4198 | separate macro expansion. @code{LOCAL} allows you to write macros that | |
4199 | define symbols, without fear of conflict between separate macro expansions. | |
4200 | ||
4201 | @item String delimiters | |
4202 | You can write strings delimited in these other ways besides | |
4203 | @code{"@var{string}"}: | |
4204 | ||
4205 | @table @code | |
4206 | @item '@var{string}' | |
4207 | You can delimit strings with single-quote characters. | |
4208 | ||
4209 | @item <@var{string}> | |
4210 | You can delimit strings with matching angle brackets. | |
4211 | @end table | |
4212 | ||
4213 | @item single-character string escape | |
4214 | To include any single character literally in a string (even if the | |
4215 | character would otherwise have some special meaning), you can prefix the | |
4216 | character with @samp{!} (an exclamation mark). For example, you can | |
4217 | write @samp{<4.3 !> 5.4!!>} to get the literal text @samp{4.3 > 5.4!}. | |
4218 | ||
4219 | @item Expression results as strings | |
4220 | You can write @samp{%@var{expr}} to evaluate the expression @var{expr} | |
01642c12 | 4221 | and use the result as a string. |
ccf8a69b BW |
4222 | @end ftable |
4223 | ||
252b5132 RH |
4224 | @node Ascii |
4225 | @section @code{.ascii "@var{string}"}@dots{} | |
4226 | ||
4227 | @cindex @code{ascii} directive | |
4228 | @cindex string literals | |
4229 | @code{.ascii} expects zero or more string literals (@pxref{Strings}) | |
4230 | separated by commas. It assembles each string (with no automatic | |
4231 | trailing zero byte) into consecutive addresses. | |
4232 | ||
4233 | @node Asciz | |
4234 | @section @code{.asciz "@var{string}"}@dots{} | |
4235 | ||
4236 | @cindex @code{asciz} directive | |
4237 | @cindex zero-terminated strings | |
4238 | @cindex null-terminated strings | |
4239 | @code{.asciz} is just like @code{.ascii}, but each string is followed by | |
4240 | a zero byte. The ``z'' in @samp{.asciz} stands for ``zero''. | |
4241 | ||
4242 | @node Balign | |
4243 | @section @code{.balign[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}} | |
4244 | ||
4245 | @cindex padding the location counter given number of bytes | |
4246 | @cindex @code{balign} directive | |
4247 | Pad the location counter (in the current subsection) to a particular | |
4248 | storage boundary. The first expression (which must be absolute) is the | |
4249 | alignment request in bytes. For example @samp{.balign 8} advances | |
4250 | the location counter until it is a multiple of 8. If the location counter | |
4251 | is already a multiple of 8, no change is needed. | |
4252 | ||
4253 | The second expression (also absolute) gives the fill value to be stored in the | |
4254 | padding bytes. It (and the comma) may be omitted. If it is omitted, the | |
4255 | padding bytes are normally zero. However, on some systems, if the section is | |
4256 | marked as containing code and the fill value is omitted, the space is filled | |
4257 | with no-op instructions. | |
4258 | ||
4259 | The third expression is also absolute, and is also optional. If it is present, | |
4260 | it is the maximum number of bytes that should be skipped by this alignment | |
4261 | directive. If doing the alignment would require skipping more bytes than the | |
4262 | specified maximum, then the alignment is not done at all. You can omit the | |
4263 | fill value (the second argument) entirely by simply using two commas after the | |
4264 | required alignment; this can be useful if you want the alignment to be filled | |
4265 | with no-op instructions when appropriate. | |
4266 | ||
4267 | @cindex @code{balignw} directive | |
4268 | @cindex @code{balignl} directive | |
4269 | The @code{.balignw} and @code{.balignl} directives are variants of the | |
4270 | @code{.balign} directive. The @code{.balignw} directive treats the fill | |
4271 | pattern as a two byte word value. The @code{.balignl} directives treats the | |
4272 | fill pattern as a four byte longword value. For example, @code{.balignw | |
4273 | 4,0x368d} will align to a multiple of 4. If it skips two bytes, they will be | |
4274 | filled in with the value 0x368d (the exact placement of the bytes depends upon | |
4275 | the endianness of the processor). If it skips 1 or 3 bytes, the fill value is | |
4276 | undefined. | |
4277 | ||
4278 | @node Byte | |
4279 | @section @code{.byte @var{expressions}} | |
4280 | ||
4281 | @cindex @code{byte} directive | |
4282 | @cindex integers, one byte | |
4283 | @code{.byte} expects zero or more expressions, separated by commas. | |
4284 | Each expression is assembled into the next byte. | |
4285 | ||
54cfded0 | 4286 | @node CFI directives |
38462edf JJ |
4287 | @section @code{.cfi_sections @var{section_list}} |
4288 | @cindex @code{cfi_sections} directive | |
4289 | @code{.cfi_sections} may be used to specify whether CFI directives | |
4290 | should emit @code{.eh_frame} section and/or @code{.debug_frame} section. | |
4291 | If @var{section_list} is @code{.eh_frame}, @code{.eh_frame} is emitted, | |
4292 | if @var{section_list} is @code{.debug_frame}, @code{.debug_frame} is emitted. | |
4293 | To emit both use @code{.eh_frame, .debug_frame}. The default if this | |
4294 | directive is not used is @code{.cfi_sections .eh_frame}. | |
4295 | ||
4b7d318b | 4296 | @section @code{.cfi_startproc [simple]} |
54cfded0 AM |
4297 | @cindex @code{cfi_startproc} directive |
4298 | @code{.cfi_startproc} is used at the beginning of each function that | |
4299 | should have an entry in @code{.eh_frame}. It initializes some internal | |
4b7d318b | 4300 | data structures. Don't forget to close the function by |
54cfded0 AM |
4301 | @code{.cfi_endproc}. |
4302 | ||
01642c12 | 4303 | Unless @code{.cfi_startproc} is used along with parameter @code{simple} |
4b7d318b | 4304 | it also emits some architecture dependent initial CFI instructions. |
01642c12 | 4305 | |
54cfded0 AM |
4306 | @section @code{.cfi_endproc} |
4307 | @cindex @code{cfi_endproc} directive | |
4308 | @code{.cfi_endproc} is used at the end of a function where it closes its | |
4309 | unwind entry previously opened by | |
b45619c0 | 4310 | @code{.cfi_startproc}, and emits it to @code{.eh_frame}. |
54cfded0 | 4311 | |
9b8ae42e JJ |
4312 | @section @code{.cfi_personality @var{encoding} [, @var{exp}]} |
4313 | @code{.cfi_personality} defines personality routine and its encoding. | |
4314 | @var{encoding} must be a constant determining how the personality | |
4315 | should be encoded. If it is 255 (@code{DW_EH_PE_omit}), second | |
4316 | argument is not present, otherwise second argument should be | |
4317 | a constant or a symbol name. When using indirect encodings, | |
4318 | the symbol provided should be the location where personality | |
4319 | can be loaded from, not the personality routine itself. | |
4320 | The default after @code{.cfi_startproc} is @code{.cfi_personality 0xff}, | |
4321 | no personality routine. | |
4322 | ||
4323 | @section @code{.cfi_lsda @var{encoding} [, @var{exp}]} | |
4324 | @code{.cfi_lsda} defines LSDA and its encoding. | |
4325 | @var{encoding} must be a constant determining how the LSDA | |
4326 | should be encoded. If it is 255 (@code{DW_EH_PE_omit}), second | |
4327 | argument is not present, otherwise second argument should be a constant | |
4328 | or a symbol name. The default after @code{.cfi_startproc} is @code{.cfi_lsda 0xff}, | |
4329 | no LSDA. | |
4330 | ||
54cfded0 | 4331 | @section @code{.cfi_def_cfa @var{register}, @var{offset}} |
01642c12 | 4332 | @code{.cfi_def_cfa} defines a rule for computing CFA as: @i{take |
54cfded0 AM |
4333 | address from @var{register} and add @var{offset} to it}. |
4334 | ||
4335 | @section @code{.cfi_def_cfa_register @var{register}} | |
4336 | @code{.cfi_def_cfa_register} modifies a rule for computing CFA. From | |
4337 | now on @var{register} will be used instead of the old one. Offset | |
4338 | remains the same. | |
4339 | ||
4340 | @section @code{.cfi_def_cfa_offset @var{offset}} | |
4341 | @code{.cfi_def_cfa_offset} modifies a rule for computing CFA. Register | |
4342 | remains the same, but @var{offset} is new. Note that it is the | |
4343 | absolute offset that will be added to a defined register to compute | |
4344 | CFA address. | |
4345 | ||
4346 | @section @code{.cfi_adjust_cfa_offset @var{offset}} | |
4347 | Same as @code{.cfi_def_cfa_offset} but @var{offset} is a relative | |
4348 | value that is added/substracted from the previous offset. | |
4349 | ||
4350 | @section @code{.cfi_offset @var{register}, @var{offset}} | |
4351 | Previous value of @var{register} is saved at offset @var{offset} from | |
01642c12 | 4352 | CFA. |
54cfded0 | 4353 | |
17076204 RH |
4354 | @section @code{.cfi_rel_offset @var{register}, @var{offset}} |
4355 | Previous value of @var{register} is saved at offset @var{offset} from | |
4356 | the current CFA register. This is transformed to @code{.cfi_offset} | |
4357 | using the known displacement of the CFA register from the CFA. | |
4358 | This is often easier to use, because the number will match the | |
4359 | code it's annotating. | |
54cfded0 | 4360 | |
4b7d318b L |
4361 | @section @code{.cfi_register @var{register1}, @var{register2}} |
4362 | Previous value of @var{register1} is saved in register @var{register2}. | |
4363 | ||
4364 | @section @code{.cfi_restore @var{register}} | |
01642c12 RM |
4365 | @code{.cfi_restore} says that the rule for @var{register} is now the |
4366 | same as it was at the beginning of the function, after all initial | |
4b7d318b L |
4367 | instruction added by @code{.cfi_startproc} were executed. |
4368 | ||
4369 | @section @code{.cfi_undefined @var{register}} | |
4370 | From now on the previous value of @var{register} can't be restored anymore. | |
4371 | ||
4372 | @section @code{.cfi_same_value @var{register}} | |
01642c12 | 4373 | Current value of @var{register} is the same like in the previous frame, |
4b7d318b L |
4374 | i.e. no restoration needed. |
4375 | ||
01642c12 RM |
4376 | @section @code{.cfi_remember_state}, |
4377 | First save all current rules for all registers by @code{.cfi_remember_state}, | |
4378 | then totally screw them up by subsequent @code{.cfi_*} directives and when | |
4379 | everything is hopelessly bad, use @code{.cfi_restore_state} to restore | |
4b7d318b L |
4380 | the previous saved state. |
4381 | ||
4382 | @section @code{.cfi_return_column @var{register}} | |
01642c12 | 4383 | Change return column @var{register}, i.e. the return address is either |
4b7d318b L |
4384 | directly in @var{register} or can be accessed by rules for @var{register}. |
4385 | ||
63752a75 JJ |
4386 | @section @code{.cfi_signal_frame} |
4387 | Mark current function as signal trampoline. | |
4388 | ||
6749011b | 4389 | @section @code{.cfi_window_save} |
364b6d8b JJ |
4390 | SPARC register window has been saved. |
4391 | ||
cdfbf930 RH |
4392 | @section @code{.cfi_escape} @var{expression}[, @dots{}] |
4393 | Allows the user to add arbitrary bytes to the unwind info. One | |
4394 | might use this to add OS-specific CFI opcodes, or generic CFI | |
4395 | opcodes that GAS does not yet support. | |
252b5132 | 4396 | |
f1c4cc75 RH |
4397 | @section @code{.cfi_val_encoded_addr @var{register}, @var{encoding}, @var{label}} |
4398 | The current value of @var{register} is @var{label}. The value of @var{label} | |
4399 | will be encoded in the output file according to @var{encoding}; see the | |
4400 | description of @code{.cfi_personality} for details on this encoding. | |
4401 | ||
4402 | The usefulness of equating a register to a fixed label is probably | |
4403 | limited to the return address register. Here, it can be useful to | |
4404 | mark a code segment that has only one return address which is reached | |
4405 | by a direct branch and no copy of the return address exists in memory | |
4406 | or another register. | |
4407 | ||
ccf8a69b BW |
4408 | @node Comm |
4409 | @section @code{.comm @var{symbol} , @var{length} } | |
bd0eb99b | 4410 | |
ccf8a69b BW |
4411 | @cindex @code{comm} directive |
4412 | @cindex symbol, common | |
4413 | @code{.comm} declares a common symbol named @var{symbol}. When linking, a | |
4414 | common symbol in one object file may be merged with a defined or common symbol | |
4415 | of the same name in another object file. If @code{@value{LD}} does not see a | |
4416 | definition for the symbol--just one or more common symbols--then it will | |
4417 | allocate @var{length} bytes of uninitialized memory. @var{length} must be an | |
4418 | absolute expression. If @code{@value{LD}} sees multiple common symbols with | |
4419 | the same name, and they do not all have the same size, it will allocate space | |
4420 | using the largest size. | |
07a53e5c | 4421 | |
c1711530 DK |
4422 | @ifset COFF-ELF |
4423 | When using ELF or (as a GNU extension) PE, the @code{.comm} directive takes | |
01642c12 | 4424 | an optional third argument. This is the desired alignment of the symbol, |
c1711530 DK |
4425 | specified for ELF as a byte boundary (for example, an alignment of 16 means |
4426 | that the least significant 4 bits of the address should be zero), and for PE | |
4427 | as a power of two (for example, an alignment of 5 means aligned to a 32-byte | |
01642c12 | 4428 | boundary). The alignment must be an absolute expression, and it must be a |
c1711530 | 4429 | power of two. If @code{@value{LD}} allocates uninitialized memory for the |
01642c12 | 4430 | common symbol, it will use the alignment when placing the symbol. If no |
c1711530 | 4431 | alignment is specified, @command{@value{AS}} will set the alignment to the |
ccf8a69b | 4432 | largest power of two less than or equal to the size of the symbol, up to a |
c1711530 DK |
4433 | maximum of 16 on ELF, or the default section alignment of 4 on PE@footnote{This |
4434 | is not the same as the executable image file alignment controlled by @code{@value{LD}}'s | |
4435 | @samp{--section-alignment} option; image file sections in PE are aligned to | |
4436 | multiples of 4096, which is far too large an alignment for ordinary variables. | |
4437 | It is rather the default alignment for (non-debug) sections within object | |
4438 | (@samp{*.o}) files, which are less strictly aligned.}. | |
ccf8a69b | 4439 | @end ifset |
cd1fcb49 | 4440 | |
ccf8a69b BW |
4441 | @ifset HPPA |
4442 | The syntax for @code{.comm} differs slightly on the HPPA. The syntax is | |
4443 | @samp{@var{symbol} .comm, @var{length}}; @var{symbol} is optional. | |
4444 | @end ifset | |
07a53e5c | 4445 | |
252b5132 RH |
4446 | @node Data |
4447 | @section @code{.data @var{subsection}} | |
4448 | ||
4449 | @cindex @code{data} directive | |
a4fb0134 | 4450 | @code{.data} tells @command{@value{AS}} to assemble the following statements onto the |
252b5132 RH |
4451 | end of the data subsection numbered @var{subsection} (which is an |
4452 | absolute expression). If @var{subsection} is omitted, it defaults | |
4453 | to zero. | |
4454 | ||
4455 | @ifset COFF | |
4456 | @node Def | |
4457 | @section @code{.def @var{name}} | |
4458 | ||
4459 | @cindex @code{def} directive | |
4460 | @cindex COFF symbols, debugging | |
4461 | @cindex debugging COFF symbols | |
4462 | Begin defining debugging information for a symbol @var{name}; the | |
4463 | definition extends until the @code{.endef} directive is encountered. | |
4464 | @ifset BOUT | |
4465 | ||
a4fb0134 | 4466 | This directive is only observed when @command{@value{AS}} is configured for COFF |
252b5132 RH |
4467 | format output; when producing @code{b.out}, @samp{.def} is recognized, |
4468 | but ignored. | |
4469 | @end ifset | |
4470 | @end ifset | |
4471 | ||
4472 | @ifset aout-bout | |
4473 | @node Desc | |
4474 | @section @code{.desc @var{symbol}, @var{abs-expression}} | |
4475 | ||
4476 | @cindex @code{desc} directive | |
4477 | @cindex COFF symbol descriptor | |
4478 | @cindex symbol descriptor, COFF | |
4479 | This directive sets the descriptor of the symbol (@pxref{Symbol Attributes}) | |
4480 | to the low 16 bits of an absolute expression. | |
4481 | ||
4482 | @ifset COFF | |
a4fb0134 | 4483 | The @samp{.desc} directive is not available when @command{@value{AS}} is |
252b5132 | 4484 | configured for COFF output; it is only for @code{a.out} or @code{b.out} |
a4fb0134 | 4485 | object format. For the sake of compatibility, @command{@value{AS}} accepts |
252b5132 RH |
4486 | it, but produces no output, when configured for COFF. |
4487 | @end ifset | |
4488 | @end ifset | |
4489 | ||
4490 | @ifset COFF | |
4491 | @node Dim | |
4492 | @section @code{.dim} | |
4493 | ||
4494 | @cindex @code{dim} directive | |
4495 | @cindex COFF auxiliary symbol information | |
4496 | @cindex auxiliary symbol information, COFF | |
4497 | This directive is generated by compilers to include auxiliary debugging | |
4498 | information in the symbol table. It is only permitted inside | |
4499 | @code{.def}/@code{.endef} pairs. | |
4500 | @ifset BOUT | |
4501 | ||
4502 | @samp{.dim} is only meaningful when generating COFF format output; when | |
a4fb0134 | 4503 | @command{@value{AS}} is generating @code{b.out}, it accepts this directive but |
252b5132 RH |
4504 | ignores it. |
4505 | @end ifset | |
4506 | @end ifset | |
4507 | ||
4508 | @node Double | |
4509 | @section @code{.double @var{flonums}} | |
4510 | ||
4511 | @cindex @code{double} directive | |
4512 | @cindex floating point numbers (double) | |
4513 | @code{.double} expects zero or more flonums, separated by commas. It | |
4514 | assembles floating point numbers. | |
4515 | @ifset GENERIC | |
4516 | The exact kind of floating point numbers emitted depends on how | |
a4fb0134 | 4517 | @command{@value{AS}} is configured. @xref{Machine Dependencies}. |
252b5132 RH |
4518 | @end ifset |
4519 | @ifclear GENERIC | |
4520 | @ifset IEEEFLOAT | |
4521 | On the @value{TARGET} family @samp{.double} emits 64-bit floating-point numbers | |
4522 | in @sc{ieee} format. | |
4523 | @end ifset | |
4524 | @end ifclear | |
4525 | ||
4526 | @node Eject | |
4527 | @section @code{.eject} | |
4528 | ||
4529 | @cindex @code{eject} directive | |
4530 | @cindex new page, in listings | |
4531 | @cindex page, in listings | |
4532 | @cindex listing control: new page | |
4533 | Force a page break at this point, when generating assembly listings. | |
4534 | ||
4535 | @node Else | |
4536 | @section @code{.else} | |
4537 | ||
4538 | @cindex @code{else} directive | |
a4fb0134 | 4539 | @code{.else} is part of the @command{@value{AS}} support for conditional |
96e9638b | 4540 | assembly; see @ref{If,,@code{.if}}. It marks the beginning of a section |
252b5132 RH |
4541 | of code to be assembled if the condition for the preceding @code{.if} |
4542 | was false. | |
4543 | ||
3fd9f047 TW |
4544 | @node Elseif |
4545 | @section @code{.elseif} | |
4546 | ||
4547 | @cindex @code{elseif} directive | |
a4fb0134 | 4548 | @code{.elseif} is part of the @command{@value{AS}} support for conditional |
96e9638b | 4549 | assembly; see @ref{If,,@code{.if}}. It is shorthand for beginning a new |
3fd9f047 TW |
4550 | @code{.if} block that would otherwise fill the entire @code{.else} section. |
4551 | ||
252b5132 RH |
4552 | @node End |
4553 | @section @code{.end} | |
4554 | ||
4555 | @cindex @code{end} directive | |
a4fb0134 | 4556 | @code{.end} marks the end of the assembly file. @command{@value{AS}} does not |
252b5132 RH |
4557 | process anything in the file past the @code{.end} directive. |
4558 | ||
4559 | @ifset COFF | |
4560 | @node Endef | |
4561 | @section @code{.endef} | |
4562 | ||
4563 | @cindex @code{endef} directive | |
4564 | This directive flags the end of a symbol definition begun with | |
4565 | @code{.def}. | |
4566 | @ifset BOUT | |
4567 | ||
4568 | @samp{.endef} is only meaningful when generating COFF format output; if | |
a4fb0134 | 4569 | @command{@value{AS}} is configured to generate @code{b.out}, it accepts this |
252b5132 RH |
4570 | directive but ignores it. |
4571 | @end ifset | |
4572 | @end ifset | |
4573 | ||
4574 | @node Endfunc | |
4575 | @section @code{.endfunc} | |
4576 | @cindex @code{endfunc} directive | |
4577 | @code{.endfunc} marks the end of a function specified with @code{.func}. | |
4578 | ||
4579 | @node Endif | |
4580 | @section @code{.endif} | |
4581 | ||
4582 | @cindex @code{endif} directive | |
a4fb0134 | 4583 | @code{.endif} is part of the @command{@value{AS}} support for conditional assembly; |
252b5132 RH |
4584 | it marks the end of a block of code that is only assembled |
4585 | conditionally. @xref{If,,@code{.if}}. | |
4586 | ||
4587 | @node Equ | |
4588 | @section @code{.equ @var{symbol}, @var{expression}} | |
4589 | ||
4590 | @cindex @code{equ} directive | |
4591 | @cindex assigning values to symbols | |
4592 | @cindex symbols, assigning values to | |
4593 | This directive sets the value of @var{symbol} to @var{expression}. | |
96e9638b | 4594 | It is synonymous with @samp{.set}; see @ref{Set,,@code{.set}}. |
252b5132 RH |
4595 | |
4596 | @ifset HPPA | |
01642c12 | 4597 | The syntax for @code{equ} on the HPPA is |
252b5132 RH |
4598 | @samp{@var{symbol} .equ @var{expression}}. |
4599 | @end ifset | |
4600 | ||
3c9b82ba | 4601 | @ifset Z80 |
01642c12 RM |
4602 | The syntax for @code{equ} on the Z80 is |
4603 | @samp{@var{symbol} equ @var{expression}}. | |
3c9b82ba | 4604 | On the Z80 it is an eror if @var{symbol} is already defined, |
01642c12 | 4605 | but the symbol is not protected from later redefinition. |
96e9638b | 4606 | Compare @ref{Equiv}. |
3c9b82ba NC |
4607 | @end ifset |
4608 | ||
252b5132 RH |
4609 | @node Equiv |
4610 | @section @code{.equiv @var{symbol}, @var{expression}} | |
4611 | @cindex @code{equiv} directive | |
4612 | The @code{.equiv} directive is like @code{.equ} and @code{.set}, except that | |
8dfa0188 NC |
4613 | the assembler will signal an error if @var{symbol} is already defined. Note a |
4614 | symbol which has been referenced but not actually defined is considered to be | |
4615 | undefined. | |
252b5132 | 4616 | |
01642c12 | 4617 | Except for the contents of the error message, this is roughly equivalent to |
252b5132 RH |
4618 | @smallexample |
4619 | .ifdef SYM | |
4620 | .err | |
4621 | .endif | |
4622 | .equ SYM,VAL | |
4623 | @end smallexample | |
9497f5ac NC |
4624 | plus it protects the symbol from later redefinition. |
4625 | ||
4626 | @node Eqv | |
4627 | @section @code{.eqv @var{symbol}, @var{expression}} | |
4628 | @cindex @code{eqv} directive | |
4629 | The @code{.eqv} directive is like @code{.equiv}, but no attempt is made to | |
4630 | evaluate the expression or any part of it immediately. Instead each time | |
4631 | the resulting symbol is used in an expression, a snapshot of its current | |
4632 | value is taken. | |
252b5132 RH |
4633 | |
4634 | @node Err | |
4635 | @section @code{.err} | |
4636 | @cindex @code{err} directive | |
a4fb0134 SC |
4637 | If @command{@value{AS}} assembles a @code{.err} directive, it will print an error |
4638 | message and, unless the @option{-Z} option was used, it will not generate an | |
f9eb6721 | 4639 | object file. This can be used to signal an error in conditionally compiled code. |
252b5132 | 4640 | |
d190d046 HPN |
4641 | @node Error |
4642 | @section @code{.error "@var{string}"} | |
4643 | @cindex error directive | |
4644 | ||
4645 | Similarly to @code{.err}, this directive emits an error, but you can specify a | |
4646 | string that will be emitted as the error message. If you don't specify the | |
4647 | message, it defaults to @code{".error directive invoked in source file"}. | |
4648 | @xref{Errors, ,Error and Warning Messages}. | |
4649 | ||
4650 | @smallexample | |
4651 | .error "This code has not been assembled and tested." | |
4652 | @end smallexample | |
4653 | ||
252b5132 RH |
4654 | @node Exitm |
4655 | @section @code{.exitm} | |
4656 | Exit early from the current macro definition. @xref{Macro}. | |
4657 | ||
4658 | @node Extern | |
4659 | @section @code{.extern} | |
4660 | ||
4661 | @cindex @code{extern} directive | |
4662 | @code{.extern} is accepted in the source program---for compatibility | |
a4fb0134 | 4663 | with other assemblers---but it is ignored. @command{@value{AS}} treats |
252b5132 RH |
4664 | all undefined symbols as external. |
4665 | ||
4666 | @node Fail | |
4667 | @section @code{.fail @var{expression}} | |
4668 | ||
4669 | @cindex @code{fail} directive | |
4670 | Generates an error or a warning. If the value of the @var{expression} is 500 | |
a4fb0134 SC |
4671 | or more, @command{@value{AS}} will print a warning message. If the value is less |
4672 | than 500, @command{@value{AS}} will print an error message. The message will | |
252b5132 RH |
4673 | include the value of @var{expression}. This can occasionally be useful inside |
4674 | complex nested macros or conditional assembly. | |
4675 | ||
252b5132 | 4676 | @node File |
14082c76 | 4677 | @section @code{.file} |
252b5132 | 4678 | @cindex @code{file} directive |
14082c76 BW |
4679 | |
4680 | @ifclear no-file-dir | |
4681 | There are two different versions of the @code{.file} directive. Targets | |
4682 | that support DWARF2 line number information use the DWARF2 version of | |
4683 | @code{.file}. Other targets use the default version. | |
4684 | ||
4685 | @subheading Default Version | |
4686 | ||
252b5132 RH |
4687 | @cindex logical file name |
4688 | @cindex file name, logical | |
14082c76 BW |
4689 | This version of the @code{.file} directive tells @command{@value{AS}} that we |
4690 | are about to start a new logical file. The syntax is: | |
4691 | ||
4692 | @smallexample | |
4693 | .file @var{string} | |
4694 | @end smallexample | |
4695 | ||
4696 | @var{string} is the new file name. In general, the filename is | |
252b5132 RH |
4697 | recognized whether or not it is surrounded by quotes @samp{"}; but if you wish |
4698 | to specify an empty file name, you must give the quotes--@code{""}. This | |
4699 | statement may go away in future: it is only recognized to be compatible with | |
a4fb0134 | 4700 | old @command{@value{AS}} programs. |
14082c76 BW |
4701 | |
4702 | @subheading DWARF2 Version | |
252b5132 RH |
4703 | @end ifclear |
4704 | ||
14082c76 BW |
4705 | When emitting DWARF2 line number information, @code{.file} assigns filenames |
4706 | to the @code{.debug_line} file name table. The syntax is: | |
4707 | ||
4708 | @smallexample | |
4709 | .file @var{fileno} @var{filename} | |
4710 | @end smallexample | |
4711 | ||
4712 | The @var{fileno} operand should be a unique positive integer to use as the | |
4713 | index of the entry in the table. The @var{filename} operand is a C string | |
4714 | literal. | |
4715 | ||
4716 | The detail of filename indices is exposed to the user because the filename | |
4717 | table is shared with the @code{.debug_info} section of the DWARF2 debugging | |
4718 | information, and thus the user must know the exact indices that table | |
4719 | entries will have. | |
4720 | ||
252b5132 RH |
4721 | @node Fill |
4722 | @section @code{.fill @var{repeat} , @var{size} , @var{value}} | |
4723 | ||
4724 | @cindex @code{fill} directive | |
4725 | @cindex writing patterns in memory | |
4726 | @cindex patterns, writing in memory | |
bc64be0c | 4727 | @var{repeat}, @var{size} and @var{value} are absolute expressions. |
252b5132 RH |
4728 | This emits @var{repeat} copies of @var{size} bytes. @var{Repeat} |
4729 | may be zero or more. @var{Size} may be zero or more, but if it is | |
4730 | more than 8, then it is deemed to have the value 8, compatible with | |
4731 | other people's assemblers. The contents of each @var{repeat} bytes | |
4732 | is taken from an 8-byte number. The highest order 4 bytes are | |
4733 | zero. The lowest order 4 bytes are @var{value} rendered in the | |
a4fb0134 | 4734 | byte-order of an integer on the computer @command{@value{AS}} is assembling for. |
252b5132 RH |
4735 | Each @var{size} bytes in a repetition is taken from the lowest order |
4736 | @var{size} bytes of this number. Again, this bizarre behavior is | |
4737 | compatible with other people's assemblers. | |
4738 | ||
4739 | @var{size} and @var{value} are optional. | |
4740 | If the second comma and @var{value} are absent, @var{value} is | |
4741 | assumed zero. If the first comma and following tokens are absent, | |
4742 | @var{size} is assumed to be 1. | |
4743 | ||
4744 | @node Float | |
4745 | @section @code{.float @var{flonums}} | |
4746 | ||
4747 | @cindex floating point numbers (single) | |
4748 | @cindex @code{float} directive | |
4749 | This directive assembles zero or more flonums, separated by commas. It | |
4750 | has the same effect as @code{.single}. | |
4751 | @ifset GENERIC | |
4752 | The exact kind of floating point numbers emitted depends on how | |
a4fb0134 | 4753 | @command{@value{AS}} is configured. |
252b5132 RH |
4754 | @xref{Machine Dependencies}. |
4755 | @end ifset | |
4756 | @ifclear GENERIC | |
4757 | @ifset IEEEFLOAT | |
4758 | On the @value{TARGET} family, @code{.float} emits 32-bit floating point numbers | |
4759 | in @sc{ieee} format. | |
4760 | @end ifset | |
4761 | @end ifclear | |
4762 | ||
4763 | @node Func | |
4764 | @section @code{.func @var{name}[,@var{label}]} | |
4765 | @cindex @code{func} directive | |
4766 | @code{.func} emits debugging information to denote function @var{name}, and | |
4767 | is ignored unless the file is assembled with debugging enabled. | |
05da4302 | 4768 | Only @samp{--gstabs[+]} is currently supported. |
252b5132 RH |
4769 | @var{label} is the entry point of the function and if omitted @var{name} |
4770 | prepended with the @samp{leading char} is used. | |
4771 | @samp{leading char} is usually @code{_} or nothing, depending on the target. | |
4772 | All functions are currently defined to have @code{void} return type. | |
4773 | The function must be terminated with @code{.endfunc}. | |
4774 | ||
4775 | @node Global | |
4776 | @section @code{.global @var{symbol}}, @code{.globl @var{symbol}} | |
4777 | ||
4778 | @cindex @code{global} directive | |
4779 | @cindex symbol, making visible to linker | |
4780 | @code{.global} makes the symbol visible to @code{@value{LD}}. If you define | |
4781 | @var{symbol} in your partial program, its value is made available to | |
4782 | other partial programs that are linked with it. Otherwise, | |
4783 | @var{symbol} takes its attributes from a symbol of the same name | |
4784 | from another file linked into the same program. | |
4785 | ||
4786 | Both spellings (@samp{.globl} and @samp{.global}) are accepted, for | |
4787 | compatibility with other assemblers. | |
4788 | ||
4789 | @ifset HPPA | |
4790 | On the HPPA, @code{.global} is not always enough to make it accessible to other | |
4791 | partial programs. You may need the HPPA-only @code{.EXPORT} directive as well. | |
96e9638b | 4792 | @xref{HPPA Directives, ,HPPA Assembler Directives}. |
252b5132 RH |
4793 | @end ifset |
4794 | ||
c91d2e08 | 4795 | @ifset ELF |
3a99f02f DJ |
4796 | @node Gnu_attribute |
4797 | @section @code{.gnu_attribute @var{tag},@var{value}} | |
4798 | Record a @sc{gnu} object attribute for this file. @xref{Object Attributes}. | |
4799 | ||
c91d2e08 NC |
4800 | @node Hidden |
4801 | @section @code{.hidden @var{names}} | |
4802 | ||
c1253627 NC |
4803 | @cindex @code{hidden} directive |
4804 | @cindex visibility | |
ed9589d4 | 4805 | This is one of the ELF visibility directives. The other two are |
01642c12 | 4806 | @code{.internal} (@pxref{Internal,,@code{.internal}}) and |
a349d9dd | 4807 | @code{.protected} (@pxref{Protected,,@code{.protected}}). |
c91d2e08 NC |
4808 | |
4809 | This directive overrides the named symbols default visibility (which is set by | |
4810 | their binding: local, global or weak). The directive sets the visibility to | |
4811 | @code{hidden} which means that the symbols are not visible to other components. | |
01642c12 | 4812 | Such symbols are always considered to be @code{protected} as well. |
c91d2e08 NC |
4813 | @end ifset |
4814 | ||
252b5132 RH |
4815 | @node hword |
4816 | @section @code{.hword @var{expressions}} | |
4817 | ||
4818 | @cindex @code{hword} directive | |
4819 | @cindex integers, 16-bit | |
4820 | @cindex numbers, 16-bit | |
4821 | @cindex sixteen bit integers | |
4822 | This expects zero or more @var{expressions}, and emits | |
4823 | a 16 bit number for each. | |
4824 | ||
4825 | @ifset GENERIC | |
4826 | This directive is a synonym for @samp{.short}; depending on the target | |
4827 | architecture, it may also be a synonym for @samp{.word}. | |
4828 | @end ifset | |
4829 | @ifclear GENERIC | |
4830 | @ifset W32 | |
4831 | This directive is a synonym for @samp{.short}. | |
4832 | @end ifset | |
4833 | @ifset W16 | |
4834 | This directive is a synonym for both @samp{.short} and @samp{.word}. | |
4835 | @end ifset | |
4836 | @end ifclear | |
4837 | ||
4838 | @node Ident | |
4839 | @section @code{.ident} | |
4840 | ||
4841 | @cindex @code{ident} directive | |
cb4c78d6 BE |
4842 | |
4843 | This directive is used by some assemblers to place tags in object files. The | |
4844 | behavior of this directive varies depending on the target. When using the | |
4845 | a.out object file format, @command{@value{AS}} simply accepts the directive for | |
4846 | source-file compatibility with existing assemblers, but does not emit anything | |
4847 | for it. When using COFF, comments are emitted to the @code{.comment} or | |
4848 | @code{.rdata} section, depending on the target. When using ELF, comments are | |
4849 | emitted to the @code{.comment} section. | |
252b5132 RH |
4850 | |
4851 | @node If | |
4852 | @section @code{.if @var{absolute expression}} | |
4853 | ||
4854 | @cindex conditional assembly | |
4855 | @cindex @code{if} directive | |
4856 | @code{.if} marks the beginning of a section of code which is only | |
4857 | considered part of the source program being assembled if the argument | |
4858 | (which must be an @var{absolute expression}) is non-zero. The end of | |
4859 | the conditional section of code must be marked by @code{.endif} | |
4860 | (@pxref{Endif,,@code{.endif}}); optionally, you may include code for the | |
4861 | alternative condition, flagged by @code{.else} (@pxref{Else,,@code{.else}}). | |
3fd9f047 TW |
4862 | If you have several conditions to check, @code{.elseif} may be used to avoid |
4863 | nesting blocks if/else within each subsequent @code{.else} block. | |
252b5132 RH |
4864 | |
4865 | The following variants of @code{.if} are also supported: | |
4866 | @table @code | |
4867 | @cindex @code{ifdef} directive | |
4868 | @item .ifdef @var{symbol} | |
4869 | Assembles the following section of code if the specified @var{symbol} | |
8dfa0188 NC |
4870 | has been defined. Note a symbol which has been referenced but not yet defined |
4871 | is considered to be undefined. | |
252b5132 | 4872 | |
26aca5f6 JB |
4873 | @cindex @code{ifb} directive |
4874 | @item .ifb @var{text} | |
4875 | Assembles the following section of code if the operand is blank (empty). | |
4876 | ||
252b5132 RH |
4877 | @cindex @code{ifc} directive |
4878 | @item .ifc @var{string1},@var{string2} | |
4879 | Assembles the following section of code if the two strings are the same. The | |
4880 | strings may be optionally quoted with single quotes. If they are not quoted, | |
4881 | the first string stops at the first comma, and the second string stops at the | |
4882 | end of the line. Strings which contain whitespace should be quoted. The | |
4883 | string comparison is case sensitive. | |
4884 | ||
4885 | @cindex @code{ifeq} directive | |
4886 | @item .ifeq @var{absolute expression} | |
4887 | Assembles the following section of code if the argument is zero. | |
4888 | ||
4889 | @cindex @code{ifeqs} directive | |
4890 | @item .ifeqs @var{string1},@var{string2} | |
4891 | Another form of @code{.ifc}. The strings must be quoted using double quotes. | |
4892 | ||
4893 | @cindex @code{ifge} directive | |
4894 | @item .ifge @var{absolute expression} | |
4895 | Assembles the following section of code if the argument is greater than or | |
4896 | equal to zero. | |
4897 | ||
4898 | @cindex @code{ifgt} directive | |
4899 | @item .ifgt @var{absolute expression} | |
4900 | Assembles the following section of code if the argument is greater than zero. | |
4901 | ||
4902 | @cindex @code{ifle} directive | |
4903 | @item .ifle @var{absolute expression} | |
4904 | Assembles the following section of code if the argument is less than or equal | |
4905 | to zero. | |
4906 | ||
4907 | @cindex @code{iflt} directive | |
4908 | @item .iflt @var{absolute expression} | |
4909 | Assembles the following section of code if the argument is less than zero. | |
4910 | ||
26aca5f6 JB |
4911 | @cindex @code{ifnb} directive |
4912 | @item .ifnb @var{text} | |
4913 | Like @code{.ifb}, but the sense of the test is reversed: this assembles the | |
4914 | following section of code if the operand is non-blank (non-empty). | |
4915 | ||
252b5132 RH |
4916 | @cindex @code{ifnc} directive |
4917 | @item .ifnc @var{string1},@var{string2}. | |
4918 | Like @code{.ifc}, but the sense of the test is reversed: this assembles the | |
4919 | following section of code if the two strings are not the same. | |
4920 | ||
4921 | @cindex @code{ifndef} directive | |
4922 | @cindex @code{ifnotdef} directive | |
4923 | @item .ifndef @var{symbol} | |
4924 | @itemx .ifnotdef @var{symbol} | |
4925 | Assembles the following section of code if the specified @var{symbol} | |
8dfa0188 NC |
4926 | has not been defined. Both spelling variants are equivalent. Note a symbol |
4927 | which has been referenced but not yet defined is considered to be undefined. | |
252b5132 RH |
4928 | |
4929 | @cindex @code{ifne} directive | |
4930 | @item .ifne @var{absolute expression} | |
4931 | Assembles the following section of code if the argument is not equal to zero | |
4932 | (in other words, this is equivalent to @code{.if}). | |
4933 | ||
4934 | @cindex @code{ifnes} directive | |
4935 | @item .ifnes @var{string1},@var{string2} | |
4936 | Like @code{.ifeqs}, but the sense of the test is reversed: this assembles the | |
4937 | following section of code if the two strings are not the same. | |
4938 | @end table | |
4939 | ||
7e005732 NC |
4940 | @node Incbin |
4941 | @section @code{.incbin "@var{file}"[,@var{skip}[,@var{count}]]} | |
4942 | ||
4943 | @cindex @code{incbin} directive | |
4944 | @cindex binary files, including | |
4945 | The @code{incbin} directive includes @var{file} verbatim at the current | |
4946 | location. You can control the search paths used with the @samp{-I} command-line | |
4947 | option (@pxref{Invoking,,Command-Line Options}). Quotation marks are required | |
4948 | around @var{file}. | |
4949 | ||
4950 | The @var{skip} argument skips a number of bytes from the start of the | |
4951 | @var{file}. The @var{count} argument indicates the maximum number of bytes to | |
15dcfbc3 NC |
4952 | read. Note that the data is not aligned in any way, so it is the user's |
4953 | responsibility to make sure that proper alignment is provided both before and | |
4954 | after the @code{incbin} directive. | |
7e005732 | 4955 | |
252b5132 RH |
4956 | @node Include |
4957 | @section @code{.include "@var{file}"} | |
4958 | ||
4959 | @cindex @code{include} directive | |
4960 | @cindex supporting files, including | |
4961 | @cindex files, including | |
4962 | This directive provides a way to include supporting files at specified | |
4963 | points in your source program. The code from @var{file} is assembled as | |
4964 | if it followed the point of the @code{.include}; when the end of the | |
4965 | included file is reached, assembly of the original file continues. You | |
4966 | can control the search paths used with the @samp{-I} command-line option | |
4967 | (@pxref{Invoking,,Command-Line Options}). Quotation marks are required | |
4968 | around @var{file}. | |
4969 | ||
4970 | @node Int | |
4971 | @section @code{.int @var{expressions}} | |
4972 | ||
4973 | @cindex @code{int} directive | |
4974 | @cindex integers, 32-bit | |
4975 | Expect zero or more @var{expressions}, of any section, separated by commas. | |
4976 | For each expression, emit a number that, at run time, is the value of that | |
4977 | expression. The byte order and bit size of the number depends on what kind | |
4978 | of target the assembly is for. | |
4979 | ||
4980 | @ifclear GENERIC | |
4981 | @ifset H8 | |
7be1c489 | 4982 | On most forms of the H8/300, @code{.int} emits 16-bit |
c2dcd04e | 4983 | integers. On the H8/300H and the Renesas SH, however, @code{.int} emits |
252b5132 RH |
4984 | 32-bit integers. |
4985 | @end ifset | |
4986 | @end ifclear | |
4987 | ||
c91d2e08 NC |
4988 | @ifset ELF |
4989 | @node Internal | |
4990 | @section @code{.internal @var{names}} | |
4991 | ||
c1253627 NC |
4992 | @cindex @code{internal} directive |
4993 | @cindex visibility | |
ed9589d4 | 4994 | This is one of the ELF visibility directives. The other two are |
01642c12 | 4995 | @code{.hidden} (@pxref{Hidden,,@code{.hidden}}) and |
a349d9dd | 4996 | @code{.protected} (@pxref{Protected,,@code{.protected}}). |
c91d2e08 NC |
4997 | |
4998 | This directive overrides the named symbols default visibility (which is set by | |
4999 | their binding: local, global or weak). The directive sets the visibility to | |
5000 | @code{internal} which means that the symbols are considered to be @code{hidden} | |
c1253627 | 5001 | (i.e., not visible to other components), and that some extra, processor specific |
c91d2e08 NC |
5002 | processing must also be performed upon the symbols as well. |
5003 | @end ifset | |
5004 | ||
252b5132 RH |
5005 | @node Irp |
5006 | @section @code{.irp @var{symbol},@var{values}}@dots{} | |
5007 | ||
5008 | @cindex @code{irp} directive | |
5009 | Evaluate a sequence of statements assigning different values to @var{symbol}. | |
5010 | The sequence of statements starts at the @code{.irp} directive, and is | |
5011 | terminated by an @code{.endr} directive. For each @var{value}, @var{symbol} is | |
5012 | set to @var{value}, and the sequence of statements is assembled. If no | |
5013 | @var{value} is listed, the sequence of statements is assembled once, with | |
5014 | @var{symbol} set to the null string. To refer to @var{symbol} within the | |
5015 | sequence of statements, use @var{\symbol}. | |
5016 | ||
5017 | For example, assembling | |
5018 | ||
5019 | @example | |
5020 | .irp param,1,2,3 | |
5021 | move d\param,sp@@- | |
5022 | .endr | |
5023 | @end example | |
5024 | ||
5025 | is equivalent to assembling | |
5026 | ||
5027 | @example | |
5028 | move d1,sp@@- | |
5029 | move d2,sp@@- | |
5030 | move d3,sp@@- | |
5031 | @end example | |
5032 | ||
96e9638b | 5033 | For some caveats with the spelling of @var{symbol}, see also @ref{Macro}. |
5e75c3ab | 5034 | |
252b5132 RH |
5035 | @node Irpc |
5036 | @section @code{.irpc @var{symbol},@var{values}}@dots{} | |
5037 | ||
5038 | @cindex @code{irpc} directive | |
5039 | Evaluate a sequence of statements assigning different values to @var{symbol}. | |
5040 | The sequence of statements starts at the @code{.irpc} directive, and is | |
5041 | terminated by an @code{.endr} directive. For each character in @var{value}, | |
5042 | @var{symbol} is set to the character, and the sequence of statements is | |
5043 | assembled. If no @var{value} is listed, the sequence of statements is | |
5044 | assembled once, with @var{symbol} set to the null string. To refer to | |
5045 | @var{symbol} within the sequence of statements, use @var{\symbol}. | |
5046 | ||
5047 | For example, assembling | |
5048 | ||
5049 | @example | |
5050 | .irpc param,123 | |
5051 | move d\param,sp@@- | |
5052 | .endr | |
5053 | @end example | |
5054 | ||
5055 | is equivalent to assembling | |
5056 | ||
5057 | @example | |
5058 | move d1,sp@@- | |
5059 | move d2,sp@@- | |
5060 | move d3,sp@@- | |
5061 | @end example | |
5062 | ||
5e75c3ab JB |
5063 | For some caveats with the spelling of @var{symbol}, see also the discussion |
5064 | at @xref{Macro}. | |
5065 | ||
252b5132 RH |
5066 | @node Lcomm |
5067 | @section @code{.lcomm @var{symbol} , @var{length}} | |
5068 | ||
5069 | @cindex @code{lcomm} directive | |
5070 | @cindex local common symbols | |
5071 | @cindex symbols, local common | |
5072 | Reserve @var{length} (an absolute expression) bytes for a local common | |
5073 | denoted by @var{symbol}. The section and value of @var{symbol} are | |
5074 | those of the new local common. The addresses are allocated in the bss | |
5075 | section, so that at run-time the bytes start off zeroed. @var{Symbol} | |
5076 | is not declared global (@pxref{Global,,@code{.global}}), so is normally | |
5077 | not visible to @code{@value{LD}}. | |
5078 | ||
5079 | @ifset GENERIC | |
5080 | Some targets permit a third argument to be used with @code{.lcomm}. This | |
5081 | argument specifies the desired alignment of the symbol in the bss section. | |
5082 | @end ifset | |
5083 | ||
5084 | @ifset HPPA | |
5085 | The syntax for @code{.lcomm} differs slightly on the HPPA. The syntax is | |
5086 | @samp{@var{symbol} .lcomm, @var{length}}; @var{symbol} is optional. | |
5087 | @end ifset | |
5088 | ||
5089 | @node Lflags | |
5090 | @section @code{.lflags} | |
5091 | ||
5092 | @cindex @code{lflags} directive (ignored) | |
a4fb0134 | 5093 | @command{@value{AS}} accepts this directive, for compatibility with other |
252b5132 RH |
5094 | assemblers, but ignores it. |
5095 | ||
5096 | @ifclear no-line-dir | |
5097 | @node Line | |
5098 | @section @code{.line @var{line-number}} | |
5099 | ||
5100 | @cindex @code{line} directive | |
252b5132 RH |
5101 | @cindex logical line number |
5102 | @ifset aout-bout | |
5103 | Change the logical line number. @var{line-number} must be an absolute | |
5104 | expression. The next line has that logical line number. Therefore any other | |
5105 | statements on the current line (after a statement separator character) are | |
5106 | reported as on logical line number @var{line-number} @minus{} 1. One day | |
a4fb0134 | 5107 | @command{@value{AS}} will no longer support this directive: it is recognized only |
252b5132 | 5108 | for compatibility with existing assembler programs. |
252b5132 RH |
5109 | @end ifset |
5110 | ||
252b5132 | 5111 | Even though this is a directive associated with the @code{a.out} or |
a4fb0134 | 5112 | @code{b.out} object-code formats, @command{@value{AS}} still recognizes it |
252b5132 RH |
5113 | when producing COFF output, and treats @samp{.line} as though it |
5114 | were the COFF @samp{.ln} @emph{if} it is found outside a | |
5115 | @code{.def}/@code{.endef} pair. | |
5116 | ||
5117 | Inside a @code{.def}, @samp{.line} is, instead, one of the directives | |
5118 | used by compilers to generate auxiliary symbol information for | |
5119 | debugging. | |
5120 | @end ifclear | |
5121 | ||
5122 | @node Linkonce | |
5123 | @section @code{.linkonce [@var{type}]} | |
5124 | @cindex COMDAT | |
5125 | @cindex @code{linkonce} directive | |
5126 | @cindex common sections | |
5127 | Mark the current section so that the linker only includes a single copy of it. | |
5128 | This may be used to include the same section in several different object files, | |
5129 | but ensure that the linker will only include it once in the final output file. | |
5130 | The @code{.linkonce} pseudo-op must be used for each instance of the section. | |
5131 | Duplicate sections are detected based on the section name, so it should be | |
5132 | unique. | |
5133 | ||
5134 | This directive is only supported by a few object file formats; as of this | |
5135 | writing, the only object file format which supports it is the Portable | |
5136 | Executable format used on Windows NT. | |
5137 | ||
5138 | The @var{type} argument is optional. If specified, it must be one of the | |
5139 | following strings. For example: | |
5140 | @smallexample | |
5141 | .linkonce same_size | |
5142 | @end smallexample | |
5143 | Not all types may be supported on all object file formats. | |
5144 | ||
5145 | @table @code | |
5146 | @item discard | |
5147 | Silently discard duplicate sections. This is the default. | |
5148 | ||
5149 | @item one_only | |
5150 | Warn if there are duplicate sections, but still keep only one copy. | |
5151 | ||
5152 | @item same_size | |
5153 | Warn if any of the duplicates have different sizes. | |
5154 | ||
5155 | @item same_contents | |
5156 | Warn if any of the duplicates do not have exactly the same contents. | |
5157 | @end table | |
5158 | ||
ccf8a69b BW |
5159 | @node List |
5160 | @section @code{.list} | |
5161 | ||
5162 | @cindex @code{list} directive | |
5163 | @cindex listing control, turning on | |
5164 | Control (in conjunction with the @code{.nolist} directive) whether or | |
5165 | not assembly listings are generated. These two directives maintain an | |
5166 | internal counter (which is zero initially). @code{.list} increments the | |
5167 | counter, and @code{.nolist} decrements it. Assembly listings are | |
5168 | generated whenever the counter is greater than zero. | |
5169 | ||
5170 | By default, listings are disabled. When you enable them (with the | |
5171 | @samp{-a} command line option; @pxref{Invoking,,Command-Line Options}), | |
5172 | the initial value of the listing counter is one. | |
5173 | ||
252b5132 RH |
5174 | @node Ln |
5175 | @section @code{.ln @var{line-number}} | |
5176 | ||
5177 | @cindex @code{ln} directive | |
5178 | @ifclear no-line-dir | |
5179 | @samp{.ln} is a synonym for @samp{.line}. | |
5180 | @end ifclear | |
5181 | @ifset no-line-dir | |
a4fb0134 | 5182 | Tell @command{@value{AS}} to change the logical line number. @var{line-number} |
252b5132 RH |
5183 | must be an absolute expression. The next line has that logical |
5184 | line number, so any other statements on the current line (after a | |
5185 | statement separator character @code{;}) are reported as on logical | |
5186 | line number @var{line-number} @minus{} 1. | |
5187 | @ifset BOUT | |
5188 | ||
a4fb0134 | 5189 | This directive is accepted, but ignored, when @command{@value{AS}} is |
252b5132 RH |
5190 | configured for @code{b.out}; its effect is only associated with COFF |
5191 | output format. | |
5192 | @end ifset | |
5193 | @end ifset | |
5194 | ||
ccf8a69b BW |
5195 | @node Loc |
5196 | @section @code{.loc @var{fileno} @var{lineno} [@var{column}] [@var{options}]} | |
5197 | @cindex @code{loc} directive | |
5198 | When emitting DWARF2 line number information, | |
5199 | the @code{.loc} directive will add a row to the @code{.debug_line} line | |
5200 | number matrix corresponding to the immediately following assembly | |
5201 | instruction. The @var{fileno}, @var{lineno}, and optional @var{column} | |
5202 | arguments will be applied to the @code{.debug_line} state machine before | |
5203 | the row is added. | |
252b5132 | 5204 | |
ccf8a69b BW |
5205 | The @var{options} are a sequence of the following tokens in any order: |
5206 | ||
5207 | @table @code | |
5208 | @item basic_block | |
5209 | This option will set the @code{basic_block} register in the | |
5210 | @code{.debug_line} state machine to @code{true}. | |
5211 | ||
5212 | @item prologue_end | |
5213 | This option will set the @code{prologue_end} register in the | |
5214 | @code{.debug_line} state machine to @code{true}. | |
5215 | ||
5216 | @item epilogue_begin | |
5217 | This option will set the @code{epilogue_begin} register in the | |
5218 | @code{.debug_line} state machine to @code{true}. | |
5219 | ||
5220 | @item is_stmt @var{value} | |
5221 | This option will set the @code{is_stmt} register in the | |
01642c12 | 5222 | @code{.debug_line} state machine to @code{value}, which must be |
ccf8a69b BW |
5223 | either 0 or 1. |
5224 | ||
5225 | @item isa @var{value} | |
5226 | This directive will set the @code{isa} register in the @code{.debug_line} | |
5227 | state machine to @var{value}, which must be an unsigned integer. | |
5228 | ||
92846e72 CC |
5229 | @item discriminator @var{value} |
5230 | This directive will set the @code{discriminator} register in the @code{.debug_line} | |
5231 | state machine to @var{value}, which must be an unsigned integer. | |
5232 | ||
ccf8a69b BW |
5233 | @end table |
5234 | ||
5235 | @node Loc_mark_labels | |
5236 | @section @code{.loc_mark_labels @var{enable}} | |
5237 | @cindex @code{loc_mark_labels} directive | |
5238 | When emitting DWARF2 line number information, | |
5239 | the @code{.loc_mark_labels} directive makes the assembler emit an entry | |
5240 | to the @code{.debug_line} line number matrix with the @code{basic_block} | |
5241 | register in the state machine set whenever a code label is seen. | |
5242 | The @var{enable} argument should be either 1 or 0, to enable or disable | |
5243 | this function respectively. | |
252b5132 | 5244 | |
4d4175af BW |
5245 | @ifset ELF |
5246 | @node Local | |
5247 | @section @code{.local @var{names}} | |
5248 | ||
5249 | @cindex @code{local} directive | |
5250 | This directive, which is available for ELF targets, marks each symbol in | |
5251 | the comma-separated list of @code{names} as a local symbol so that it | |
5252 | will not be externally visible. If the symbols do not already exist, | |
5253 | they will be created. | |
5254 | ||
5255 | For targets where the @code{.lcomm} directive (@pxref{Lcomm}) does not | |
5256 | accept an alignment argument, which is the case for most ELF targets, | |
5257 | the @code{.local} directive can be used in combination with @code{.comm} | |
5258 | (@pxref{Comm}) to define aligned local common data. | |
5259 | @end ifset | |
5260 | ||
252b5132 RH |
5261 | @node Long |
5262 | @section @code{.long @var{expressions}} | |
5263 | ||
5264 | @cindex @code{long} directive | |
96e9638b | 5265 | @code{.long} is the same as @samp{.int}. @xref{Int,,@code{.int}}. |
252b5132 RH |
5266 | |
5267 | @ignore | |
5268 | @c no one seems to know what this is for or whether this description is | |
5269 | @c what it really ought to do | |
5270 | @node Lsym | |
5271 | @section @code{.lsym @var{symbol}, @var{expression}} | |
5272 | ||
5273 | @cindex @code{lsym} directive | |
5274 | @cindex symbol, not referenced in assembly | |
5275 | @code{.lsym} creates a new symbol named @var{symbol}, but does not put it in | |
5276 | the hash table, ensuring it cannot be referenced by name during the | |
5277 | rest of the assembly. This sets the attributes of the symbol to be | |
5278 | the same as the expression value: | |
5279 | @smallexample | |
5280 | @var{other} = @var{descriptor} = 0 | |
5281 | @var{type} = @r{(section of @var{expression})} | |
5282 | @var{value} = @var{expression} | |
5283 | @end smallexample | |
5284 | @noindent | |
5285 | The new symbol is not flagged as external. | |
5286 | @end ignore | |
5287 | ||
5288 | @node Macro | |
5289 | @section @code{.macro} | |
5290 | ||
5291 | @cindex macros | |
5292 | The commands @code{.macro} and @code{.endm} allow you to define macros that | |
5293 | generate assembly output. For example, this definition specifies a macro | |
5294 | @code{sum} that puts a sequence of numbers into memory: | |
5295 | ||
5296 | @example | |
5297 | .macro sum from=0, to=5 | |
5298 | .long \from | |
5299 | .if \to-\from | |
5300 | sum "(\from+1)",\to | |
5301 | .endif | |
5302 | .endm | |
5303 | @end example | |
5304 | ||
5305 | @noindent | |
5306 | With that definition, @samp{SUM 0,5} is equivalent to this assembly input: | |
5307 | ||
5308 | @example | |
5309 | .long 0 | |
5310 | .long 1 | |
5311 | .long 2 | |
5312 | .long 3 | |
5313 | .long 4 | |
5314 | .long 5 | |
5315 | @end example | |
5316 | ||
5317 | @ftable @code | |
5318 | @item .macro @var{macname} | |
5319 | @itemx .macro @var{macname} @var{macargs} @dots{} | |
5320 | @cindex @code{macro} directive | |
5321 | Begin the definition of a macro called @var{macname}. If your macro | |
5322 | definition requires arguments, specify their names after the macro name, | |
6eaeac8a JB |
5323 | separated by commas or spaces. You can qualify the macro argument to |
5324 | indicate whether all invocations must specify a non-blank value (through | |
5325 | @samp{:@code{req}}), or whether it takes all of the remaining arguments | |
5326 | (through @samp{:@code{vararg}}). You can supply a default value for any | |
fffeaa5f JB |
5327 | macro argument by following the name with @samp{=@var{deflt}}. You |
5328 | cannot define two macros with the same @var{macname} unless it has been | |
96e9638b | 5329 | subject to the @code{.purgem} directive (@pxref{Purgem}) between the two |
fffeaa5f | 5330 | definitions. For example, these are all valid @code{.macro} statements: |
252b5132 RH |
5331 | |
5332 | @table @code | |
5333 | @item .macro comm | |
5334 | Begin the definition of a macro called @code{comm}, which takes no | |
5335 | arguments. | |
5336 | ||
6258339f | 5337 | @item .macro plus1 p, p1 |
252b5132 RH |
5338 | @itemx .macro plus1 p p1 |
5339 | Either statement begins the definition of a macro called @code{plus1}, | |
5340 | which takes two arguments; within the macro definition, write | |
5341 | @samp{\p} or @samp{\p1} to evaluate the arguments. | |
5342 | ||
5343 | @item .macro reserve_str p1=0 p2 | |
5344 | Begin the definition of a macro called @code{reserve_str}, with two | |
5345 | arguments. The first argument has a default value, but not the second. | |
5346 | After the definition is complete, you can call the macro either as | |
5347 | @samp{reserve_str @var{a},@var{b}} (with @samp{\p1} evaluating to | |
5348 | @var{a} and @samp{\p2} evaluating to @var{b}), or as @samp{reserve_str | |
5349 | ,@var{b}} (with @samp{\p1} evaluating as the default, in this case | |
5350 | @samp{0}, and @samp{\p2} evaluating to @var{b}). | |
252b5132 | 5351 | |
6eaeac8a JB |
5352 | @item .macro m p1:req, p2=0, p3:vararg |
5353 | Begin the definition of a macro called @code{m}, with at least three | |
5354 | arguments. The first argument must always have a value specified, but | |
5355 | not the second, which instead has a default value. The third formal | |
5356 | will get assigned all remaining arguments specified at invocation time. | |
5357 | ||
252b5132 RH |
5358 | When you call a macro, you can specify the argument values either by |
5359 | position, or by keyword. For example, @samp{sum 9,17} is equivalent to | |
5360 | @samp{sum to=17, from=9}. | |
5361 | ||
6258339f NC |
5362 | @end table |
5363 | ||
5e75c3ab JB |
5364 | Note that since each of the @var{macargs} can be an identifier exactly |
5365 | as any other one permitted by the target architecture, there may be | |
5366 | occasional problems if the target hand-crafts special meanings to certain | |
6258339f | 5367 | characters when they occur in a special position. For example, if the colon |
5e75c3ab | 5368 | (@code{:}) is generally permitted to be part of a symbol name, but the |
6258339f | 5369 | architecture specific code special-cases it when occurring as the final |
5e75c3ab JB |
5370 | character of a symbol (to denote a label), then the macro parameter |
5371 | replacement code will have no way of knowing that and consider the whole | |
5372 | construct (including the colon) an identifier, and check only this | |
6258339f NC |
5373 | identifier for being the subject to parameter substitution. So for example |
5374 | this macro definition: | |
5375 | ||
5376 | @example | |
5377 | .macro label l | |
5378 | \l: | |
5379 | .endm | |
5380 | @end example | |
5381 | ||
5382 | might not work as expected. Invoking @samp{label foo} might not create a label | |
5383 | called @samp{foo} but instead just insert the text @samp{\l:} into the | |
5384 | assembler source, probably generating an error about an unrecognised | |
5385 | identifier. | |
5386 | ||
5387 | Similarly problems might occur with the period character (@samp{.}) | |
5388 | which is often allowed inside opcode names (and hence identifier names). So | |
5389 | for example constructing a macro to build an opcode from a base name and a | |
5390 | length specifier like this: | |
5391 | ||
5392 | @example | |
5393 | .macro opcode base length | |
5394 | \base.\length | |
5395 | .endm | |
5396 | @end example | |
5397 | ||
5398 | and invoking it as @samp{opcode store l} will not create a @samp{store.l} | |
5399 | instruction but instead generate some kind of error as the assembler tries to | |
5400 | interpret the text @samp{\base.\length}. | |
5401 | ||
5402 | There are several possible ways around this problem: | |
5403 | ||
5404 | @table @code | |
5405 | @item Insert white space | |
5406 | If it is possible to use white space characters then this is the simplest | |
5407 | solution. eg: | |
5408 | ||
5409 | @example | |
5410 | .macro label l | |
5411 | \l : | |
5412 | .endm | |
5413 | @end example | |
5414 | ||
5415 | @item Use @samp{\()} | |
5416 | The string @samp{\()} can be used to separate the end of a macro argument from | |
5417 | the following text. eg: | |
5418 | ||
5419 | @example | |
5420 | .macro opcode base length | |
5421 | \base\().\length | |
5422 | .endm | |
5423 | @end example | |
5424 | ||
5425 | @item Use the alternate macro syntax mode | |
5426 | In the alternative macro syntax mode the ampersand character (@samp{&}) can be | |
5427 | used as a separator. eg: | |
5e75c3ab JB |
5428 | |
5429 | @example | |
5430 | .altmacro | |
5431 | .macro label l | |
5432 | l&: | |
5433 | .endm | |
5434 | @end example | |
6258339f | 5435 | @end table |
5e75c3ab | 5436 | |
96e9638b | 5437 | Note: this problem of correctly identifying string parameters to pseudo ops |
01642c12 | 5438 | also applies to the identifiers used in @code{.irp} (@pxref{Irp}) |
96e9638b | 5439 | and @code{.irpc} (@pxref{Irpc}) as well. |
5e75c3ab | 5440 | |
252b5132 RH |
5441 | @item .endm |
5442 | @cindex @code{endm} directive | |
5443 | Mark the end of a macro definition. | |
5444 | ||
5445 | @item .exitm | |
5446 | @cindex @code{exitm} directive | |
5447 | Exit early from the current macro definition. | |
5448 | ||
5449 | @cindex number of macros executed | |
5450 | @cindex macros, count executed | |
5451 | @item \@@ | |
a4fb0134 | 5452 | @command{@value{AS}} maintains a counter of how many macros it has |
252b5132 RH |
5453 | executed in this pseudo-variable; you can copy that number to your |
5454 | output with @samp{\@@}, but @emph{only within a macro definition}. | |
5455 | ||
252b5132 RH |
5456 | @item LOCAL @var{name} [ , @dots{} ] |
5457 | @emph{Warning: @code{LOCAL} is only available if you select ``alternate | |
caa32fe5 NC |
5458 | macro syntax'' with @samp{--alternate} or @code{.altmacro}.} |
5459 | @xref{Altmacro,,@code{.altmacro}}. | |
5460 | @end ftable | |
252b5132 | 5461 | |
ccf8a69b BW |
5462 | @node MRI |
5463 | @section @code{.mri @var{val}} | |
caa32fe5 | 5464 | |
ccf8a69b BW |
5465 | @cindex @code{mri} directive |
5466 | @cindex MRI mode, temporarily | |
5467 | If @var{val} is non-zero, this tells @command{@value{AS}} to enter MRI mode. If | |
5468 | @var{val} is zero, this tells @command{@value{AS}} to exit MRI mode. This change | |
5469 | affects code assembled until the next @code{.mri} directive, or until the end | |
5470 | of the file. @xref{M, MRI mode, MRI mode}. | |
252b5132 | 5471 | |
caa32fe5 NC |
5472 | @node Noaltmacro |
5473 | @section @code{.noaltmacro} | |
96e9638b | 5474 | Disable alternate macro mode. @xref{Altmacro}. |
caa32fe5 | 5475 | |
252b5132 RH |
5476 | @node Nolist |
5477 | @section @code{.nolist} | |
5478 | ||
5479 | @cindex @code{nolist} directive | |
5480 | @cindex listing control, turning off | |
5481 | Control (in conjunction with the @code{.list} directive) whether or | |
5482 | not assembly listings are generated. These two directives maintain an | |
5483 | internal counter (which is zero initially). @code{.list} increments the | |
5484 | counter, and @code{.nolist} decrements it. Assembly listings are | |
5485 | generated whenever the counter is greater than zero. | |
5486 | ||
5487 | @node Octa | |
5488 | @section @code{.octa @var{bignums}} | |
5489 | ||
5490 | @c FIXME: double size emitted for "octa" on i960, others? Or warn? | |
5491 | @cindex @code{octa} directive | |
5492 | @cindex integer, 16-byte | |
5493 | @cindex sixteen byte integer | |
5494 | This directive expects zero or more bignums, separated by commas. For each | |
5495 | bignum, it emits a 16-byte integer. | |
5496 | ||
5497 | The term ``octa'' comes from contexts in which a ``word'' is two bytes; | |
5498 | hence @emph{octa}-word for 16 bytes. | |
5499 | ||
5500 | @node Org | |
5501 | @section @code{.org @var{new-lc} , @var{fill}} | |
5502 | ||
5503 | @cindex @code{org} directive | |
5504 | @cindex location counter, advancing | |
5505 | @cindex advancing location counter | |
5506 | @cindex current address, advancing | |
5507 | Advance the location counter of the current section to | |
5508 | @var{new-lc}. @var{new-lc} is either an absolute expression or an | |
5509 | expression with the same section as the current subsection. That is, | |
5510 | you can't use @code{.org} to cross sections: if @var{new-lc} has the | |
5511 | wrong section, the @code{.org} directive is ignored. To be compatible | |
5512 | with former assemblers, if the section of @var{new-lc} is absolute, | |
a4fb0134 | 5513 | @command{@value{AS}} issues a warning, then pretends the section of @var{new-lc} |
252b5132 RH |
5514 | is the same as the current subsection. |
5515 | ||
5516 | @code{.org} may only increase the location counter, or leave it | |
5517 | unchanged; you cannot use @code{.org} to move the location counter | |
5518 | backwards. | |
5519 | ||
5520 | @c double negative used below "not undefined" because this is a specific | |
5521 | @c reference to "undefined" (as SEG_UNKNOWN is called in this manual) | |
5522 | @c section. doc@cygnus.com 18feb91 | |
a4fb0134 | 5523 | Because @command{@value{AS}} tries to assemble programs in one pass, @var{new-lc} |
252b5132 RH |
5524 | may not be undefined. If you really detest this restriction we eagerly await |
5525 | a chance to share your improved assembler. | |
5526 | ||
5527 | Beware that the origin is relative to the start of the section, not | |
5528 | to the start of the subsection. This is compatible with other | |
5529 | people's assemblers. | |
5530 | ||
5531 | When the location counter (of the current subsection) is advanced, the | |
5532 | intervening bytes are filled with @var{fill} which should be an | |
5533 | absolute expression. If the comma and @var{fill} are omitted, | |
5534 | @var{fill} defaults to zero. | |
5535 | ||
5536 | @node P2align | |
5537 | @section @code{.p2align[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}} | |
5538 | ||
5539 | @cindex padding the location counter given a power of two | |
5540 | @cindex @code{p2align} directive | |
5541 | Pad the location counter (in the current subsection) to a particular | |
5542 | storage boundary. The first expression (which must be absolute) is the | |
5543 | number of low-order zero bits the location counter must have after | |
5544 | advancement. For example @samp{.p2align 3} advances the location | |
5545 | counter until it a multiple of 8. If the location counter is already a | |
5546 | multiple of 8, no change is needed. | |
5547 | ||
5548 | The second expression (also absolute) gives the fill value to be stored in the | |
5549 | padding bytes. It (and the comma) may be omitted. If it is omitted, the | |
5550 | padding bytes are normally zero. However, on some systems, if the section is | |
5551 | marked as containing code and the fill value is omitted, the space is filled | |
5552 | with no-op instructions. | |
5553 | ||
5554 | The third expression is also absolute, and is also optional. If it is present, | |
5555 | it is the maximum number of bytes that should be skipped by this alignment | |
5556 | directive. If doing the alignment would require skipping more bytes than the | |
5557 | specified maximum, then the alignment is not done at all. You can omit the | |
5558 | fill value (the second argument) entirely by simply using two commas after the | |
5559 | required alignment; this can be useful if you want the alignment to be filled | |
5560 | with no-op instructions when appropriate. | |
5561 | ||
5562 | @cindex @code{p2alignw} directive | |
5563 | @cindex @code{p2alignl} directive | |
5564 | The @code{.p2alignw} and @code{.p2alignl} directives are variants of the | |
5565 | @code{.p2align} directive. The @code{.p2alignw} directive treats the fill | |
5566 | pattern as a two byte word value. The @code{.p2alignl} directives treats the | |
5567 | fill pattern as a four byte longword value. For example, @code{.p2alignw | |
5568 | 2,0x368d} will align to a multiple of 4. If it skips two bytes, they will be | |
5569 | filled in with the value 0x368d (the exact placement of the bytes depends upon | |
5570 | the endianness of the processor). If it skips 1 or 3 bytes, the fill value is | |
5571 | undefined. | |
5572 | ||
ccf8a69b BW |
5573 | @ifset ELF |
5574 | @node PopSection | |
5575 | @section @code{.popsection} | |
5576 | ||
5577 | @cindex @code{popsection} directive | |
5578 | @cindex Section Stack | |
5579 | This is one of the ELF section stack manipulation directives. The others are | |
01642c12 RM |
5580 | @code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}), |
5581 | @code{.pushsection} (@pxref{PushSection}), and @code{.previous} | |
ccf8a69b BW |
5582 | (@pxref{Previous}). |
5583 | ||
5584 | This directive replaces the current section (and subsection) with the top | |
5585 | section (and subsection) on the section stack. This section is popped off the | |
01642c12 | 5586 | stack. |
ccf8a69b BW |
5587 | @end ifset |
5588 | ||
c91d2e08 NC |
5589 | @ifset ELF |
5590 | @node Previous | |
5591 | @section @code{.previous} | |
5592 | ||
c1253627 | 5593 | @cindex @code{previous} directive |
c91d2e08 NC |
5594 | @cindex Section Stack |
5595 | This is one of the ELF section stack manipulation directives. The others are | |
a349d9dd PB |
5596 | @code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}), |
5597 | @code{.pushsection} (@pxref{PushSection}), and @code{.popsection} | |
5598 | (@pxref{PopSection}). | |
c91d2e08 NC |
5599 | |
5600 | This directive swaps the current section (and subsection) with most recently | |
8b040e0a | 5601 | referenced section/subsection pair prior to this one. Multiple |
c91d2e08 | 5602 | @code{.previous} directives in a row will flip between two sections (and their |
8b040e0a NC |
5603 | subsections). For example: |
5604 | ||
5605 | @smallexample | |
5606 | .section A | |
5607 | .subsection 1 | |
5608 | .word 0x1234 | |
5609 | .subsection 2 | |
5610 | .word 0x5678 | |
5611 | .previous | |
5612 | .word 0x9abc | |
5613 | @end smallexample | |
5614 | ||
5615 | Will place 0x1234 and 0x9abc into subsection 1 and 0x5678 into subsection 2 of | |
5616 | section A. Whilst: | |
5617 | ||
5618 | @smallexample | |
5619 | .section A | |
5620 | .subsection 1 | |
5621 | # Now in section A subsection 1 | |
5622 | .word 0x1234 | |
5623 | .section B | |
5624 | .subsection 0 | |
5625 | # Now in section B subsection 0 | |
5626 | .word 0x5678 | |
5627 | .subsection 1 | |
5628 | # Now in section B subsection 1 | |
5629 | .word 0x9abc | |
5630 | .previous | |
5631 | # Now in section B subsection 0 | |
5632 | .word 0xdef0 | |
5633 | @end smallexample | |
5634 | ||
5635 | Will place 0x1234 into section A, 0x5678 and 0xdef0 into subsection 0 of | |
5636 | section B and 0x9abc into subsection 1 of section B. | |
c91d2e08 NC |
5637 | |
5638 | In terms of the section stack, this directive swaps the current section with | |
5639 | the top section on the section stack. | |
5640 | @end ifset | |
5641 | ||
252b5132 RH |
5642 | @node Print |
5643 | @section @code{.print @var{string}} | |
5644 | ||
5645 | @cindex @code{print} directive | |
a4fb0134 | 5646 | @command{@value{AS}} will print @var{string} on the standard output during |
252b5132 RH |
5647 | assembly. You must put @var{string} in double quotes. |
5648 | ||
c91d2e08 NC |
5649 | @ifset ELF |
5650 | @node Protected | |
5651 | @section @code{.protected @var{names}} | |
5652 | ||
c1253627 NC |
5653 | @cindex @code{protected} directive |
5654 | @cindex visibility | |
ed9589d4 | 5655 | This is one of the ELF visibility directives. The other two are |
a349d9dd | 5656 | @code{.hidden} (@pxref{Hidden}) and @code{.internal} (@pxref{Internal}). |
c91d2e08 NC |
5657 | |
5658 | This directive overrides the named symbols default visibility (which is set by | |
5659 | their binding: local, global or weak). The directive sets the visibility to | |
5660 | @code{protected} which means that any references to the symbols from within the | |
5661 | components that defines them must be resolved to the definition in that | |
5662 | component, even if a definition in another component would normally preempt | |
01642c12 | 5663 | this. |
c91d2e08 NC |
5664 | @end ifset |
5665 | ||
252b5132 RH |
5666 | @node Psize |
5667 | @section @code{.psize @var{lines} , @var{columns}} | |
5668 | ||
5669 | @cindex @code{psize} directive | |
5670 | @cindex listing control: paper size | |
5671 | @cindex paper size, for listings | |
5672 | Use this directive to declare the number of lines---and, optionally, the | |
5673 | number of columns---to use for each page, when generating listings. | |
5674 | ||
5675 | If you do not use @code{.psize}, listings use a default line-count | |
5676 | of 60. You may omit the comma and @var{columns} specification; the | |
5677 | default width is 200 columns. | |
5678 | ||
a4fb0134 | 5679 | @command{@value{AS}} generates formfeeds whenever the specified number of |
252b5132 RH |
5680 | lines is exceeded (or whenever you explicitly request one, using |
5681 | @code{.eject}). | |
5682 | ||
5683 | If you specify @var{lines} as @code{0}, no formfeeds are generated save | |
5684 | those explicitly specified with @code{.eject}. | |
5685 | ||
5686 | @node Purgem | |
5687 | @section @code{.purgem @var{name}} | |
5688 | ||
5689 | @cindex @code{purgem} directive | |
5690 | Undefine the macro @var{name}, so that later uses of the string will not be | |
5691 | expanded. @xref{Macro}. | |
5692 | ||
c91d2e08 NC |
5693 | @ifset ELF |
5694 | @node PushSection | |
9cfc3331 | 5695 | @section @code{.pushsection @var{name} [, @var{subsection}] [, "@var{flags}"[, @@@var{type}[,@var{arguments}]]]} |
c91d2e08 | 5696 | |
c1253627 | 5697 | @cindex @code{pushsection} directive |
c91d2e08 NC |
5698 | @cindex Section Stack |
5699 | This is one of the ELF section stack manipulation directives. The others are | |
01642c12 RM |
5700 | @code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}), |
5701 | @code{.popsection} (@pxref{PopSection}), and @code{.previous} | |
a349d9dd | 5702 | (@pxref{Previous}). |
c91d2e08 | 5703 | |
e9863d7f DJ |
5704 | This directive pushes the current section (and subsection) onto the |
5705 | top of the section stack, and then replaces the current section and | |
9cfc3331 L |
5706 | subsection with @code{name} and @code{subsection}. The optional |
5707 | @code{flags}, @code{type} and @code{arguments} are treated the same | |
5708 | as in the @code{.section} (@pxref{Section}) directive. | |
c91d2e08 NC |
5709 | @end ifset |
5710 | ||
252b5132 RH |
5711 | @node Quad |
5712 | @section @code{.quad @var{bignums}} | |
5713 | ||
5714 | @cindex @code{quad} directive | |
5715 | @code{.quad} expects zero or more bignums, separated by commas. For | |
5716 | each bignum, it emits | |
5717 | @ifclear bignum-16 | |
5718 | an 8-byte integer. If the bignum won't fit in 8 bytes, it prints a | |
5719 | warning message; and just takes the lowest order 8 bytes of the bignum. | |
5720 | @cindex eight-byte integer | |
5721 | @cindex integer, 8-byte | |
5722 | ||
5723 | The term ``quad'' comes from contexts in which a ``word'' is two bytes; | |
5724 | hence @emph{quad}-word for 8 bytes. | |
5725 | @end ifclear | |
5726 | @ifset bignum-16 | |
5727 | a 16-byte integer. If the bignum won't fit in 16 bytes, it prints a | |
5728 | warning message; and just takes the lowest order 16 bytes of the bignum. | |
5729 | @cindex sixteen-byte integer | |
5730 | @cindex integer, 16-byte | |
5731 | @end ifset | |
5732 | ||
05e9452c AM |
5733 | @node Reloc |
5734 | @section @code{.reloc @var{offset}, @var{reloc_name}[, @var{expression}]} | |
5735 | ||
5736 | @cindex @code{reloc} directive | |
5737 | Generate a relocation at @var{offset} of type @var{reloc_name} with value | |
5738 | @var{expression}. If @var{offset} is a number, the relocation is generated in | |
5739 | the current section. If @var{offset} is an expression that resolves to a | |
5740 | symbol plus offset, the relocation is generated in the given symbol's section. | |
5741 | @var{expression}, if present, must resolve to a symbol plus addend or to an | |
5742 | absolute value, but note that not all targets support an addend. e.g. ELF REL | |
5743 | targets such as i386 store an addend in the section contents rather than in the | |
5744 | relocation. This low level interface does not support addends stored in the | |
5745 | section. | |
5746 | ||
252b5132 RH |
5747 | @node Rept |
5748 | @section @code{.rept @var{count}} | |
5749 | ||
5750 | @cindex @code{rept} directive | |
5751 | Repeat the sequence of lines between the @code{.rept} directive and the next | |
5752 | @code{.endr} directive @var{count} times. | |
5753 | ||
5754 | For example, assembling | |
5755 | ||
5756 | @example | |
5757 | .rept 3 | |
5758 | .long 0 | |
5759 | .endr | |
5760 | @end example | |
5761 | ||
5762 | is equivalent to assembling | |
5763 | ||
5764 | @example | |
5765 | .long 0 | |
5766 | .long 0 | |
5767 | .long 0 | |
5768 | @end example | |
5769 | ||
5770 | @node Sbttl | |
5771 | @section @code{.sbttl "@var{subheading}"} | |
5772 | ||
5773 | @cindex @code{sbttl} directive | |
5774 | @cindex subtitles for listings | |
5775 | @cindex listing control: subtitle | |
5776 | Use @var{subheading} as the title (third line, immediately after the | |
5777 | title line) when generating assembly listings. | |
5778 | ||
5779 | This directive affects subsequent pages, as well as the current page if | |
5780 | it appears within ten lines of the top of a page. | |
5781 | ||
5782 | @ifset COFF | |
5783 | @node Scl | |
5784 | @section @code{.scl @var{class}} | |
5785 | ||
5786 | @cindex @code{scl} directive | |
5787 | @cindex symbol storage class (COFF) | |
5788 | @cindex COFF symbol storage class | |
5789 | Set the storage-class value for a symbol. This directive may only be | |
5790 | used inside a @code{.def}/@code{.endef} pair. Storage class may flag | |
5791 | whether a symbol is static or external, or it may record further | |
5792 | symbolic debugging information. | |
5793 | @ifset BOUT | |
5794 | ||
5795 | The @samp{.scl} directive is primarily associated with COFF output; when | |
a4fb0134 | 5796 | configured to generate @code{b.out} output format, @command{@value{AS}} |
252b5132 RH |
5797 | accepts this directive but ignores it. |
5798 | @end ifset | |
5799 | @end ifset | |
5800 | ||
c1253627 | 5801 | @ifset COFF-ELF |
252b5132 | 5802 | @node Section |
c1253627 | 5803 | @section @code{.section @var{name}} |
252b5132 | 5804 | |
252b5132 RH |
5805 | @cindex named section |
5806 | Use the @code{.section} directive to assemble the following code into a section | |
5807 | named @var{name}. | |
5808 | ||
5809 | This directive is only supported for targets that actually support arbitrarily | |
5810 | named sections; on @code{a.out} targets, for example, it is not accepted, even | |
5811 | with a standard @code{a.out} section name. | |
5812 | ||
c1253627 NC |
5813 | @ifset COFF |
5814 | @ifset ELF | |
5815 | @c only print the extra heading if both COFF and ELF are set | |
5816 | @subheading COFF Version | |
5817 | @end ifset | |
5818 | ||
5819 | @cindex @code{section} directive (COFF version) | |
252b5132 RH |
5820 | For COFF targets, the @code{.section} directive is used in one of the following |
5821 | ways: | |
c91d2e08 | 5822 | |
252b5132 RH |
5823 | @smallexample |
5824 | .section @var{name}[, "@var{flags}"] | |
4e188d17 | 5825 | .section @var{name}[, @var{subsection}] |
252b5132 RH |
5826 | @end smallexample |
5827 | ||
5828 | If the optional argument is quoted, it is taken as flags to use for the | |
5829 | section. Each flag is a single character. The following flags are recognized: | |
5830 | @table @code | |
5831 | @item b | |
5832 | bss section (uninitialized data) | |
5833 | @item n | |
5834 | section is not loaded | |
5835 | @item w | |
5836 | writable section | |
5837 | @item d | |
5838 | data section | |
5839 | @item r | |
5840 | read-only section | |
5841 | @item x | |
5842 | executable section | |
2dcc60be ILT |
5843 | @item s |
5844 | shared section (meaningful for PE targets) | |
6ff96af6 NC |
5845 | @item a |
5846 | ignored. (For compatibility with the ELF version) | |
63ad59ae KT |
5847 | @item y |
5848 | section is not readable (meaningful for PE targets) | |
31907d5e DK |
5849 | @item 0-9 |
5850 | single-digit power-of-two section alignment (GNU extension) | |
252b5132 RH |
5851 | @end table |
5852 | ||
5853 | If no flags are specified, the default flags depend upon the section name. If | |
5854 | the section name is not recognized, the default will be for the section to be | |
7e84d676 NC |
5855 | loaded and writable. Note the @code{n} and @code{w} flags remove attributes |
5856 | from the section, rather than adding them, so if they are used on their own it | |
5857 | will be as if no flags had been specified at all. | |
252b5132 RH |
5858 | |
5859 | If the optional argument to the @code{.section} directive is not quoted, it is | |
4e188d17 | 5860 | taken as a subsection number (@pxref{Sub-Sections}). |
c1253627 | 5861 | @end ifset |
252b5132 RH |
5862 | |
5863 | @ifset ELF | |
c1253627 NC |
5864 | @ifset COFF |
5865 | @c only print the extra heading if both COFF and ELF are set | |
5866 | @subheading ELF Version | |
5867 | @end ifset | |
5868 | ||
c91d2e08 NC |
5869 | @cindex Section Stack |
5870 | This is one of the ELF section stack manipulation directives. The others are | |
01642c12 | 5871 | @code{.subsection} (@pxref{SubSection}), @code{.pushsection} |
a349d9dd PB |
5872 | (@pxref{PushSection}), @code{.popsection} (@pxref{PopSection}), and |
5873 | @code{.previous} (@pxref{Previous}). | |
c91d2e08 | 5874 | |
c1253627 | 5875 | @cindex @code{section} directive (ELF version) |
252b5132 | 5876 | For ELF targets, the @code{.section} directive is used like this: |
c91d2e08 | 5877 | |
252b5132 | 5878 | @smallexample |
7047dd1e | 5879 | .section @var{name} [, "@var{flags}"[, @@@var{type}[,@var{flag_specific_arguments}]]] |
252b5132 | 5880 | @end smallexample |
c91d2e08 | 5881 | |
252b5132 | 5882 | The optional @var{flags} argument is a quoted string which may contain any |
a349d9dd | 5883 | combination of the following characters: |
252b5132 RH |
5884 | @table @code |
5885 | @item a | |
5886 | section is allocatable | |
18ae9cc1 L |
5887 | @item e |
5888 | section is excluded from executable and shared library. | |
252b5132 RH |
5889 | @item w |
5890 | section is writable | |
5891 | @item x | |
5892 | section is executable | |
ec38dd05 JJ |
5893 | @item M |
5894 | section is mergeable | |
5895 | @item S | |
5896 | section contains zero terminated strings | |
22fe14ad NC |
5897 | @item G |
5898 | section is a member of a section group | |
5899 | @item T | |
5900 | section is used for thread-local-storage | |
01642c12 RM |
5901 | @item ? |
5902 | section is a member of the previously-current section's group, if any | |
252b5132 RH |
5903 | @end table |
5904 | ||
5905 | The optional @var{type} argument may contain one of the following constants: | |
5906 | @table @code | |
5907 | @item @@progbits | |
5908 | section contains data | |
5909 | @item @@nobits | |
5910 | section does not contain data (i.e., section only occupies space) | |
22fe14ad NC |
5911 | @item @@note |
5912 | section contains data which is used by things other than the program | |
10b016c2 PB |
5913 | @item @@init_array |
5914 | section contains an array of pointers to init functions | |
5915 | @item @@fini_array | |
5916 | section contains an array of pointers to finish functions | |
5917 | @item @@preinit_array | |
5918 | section contains an array of pointers to pre-init functions | |
252b5132 RH |
5919 | @end table |
5920 | ||
10b016c2 PB |
5921 | Many targets only support the first three section types. |
5922 | ||
ececec60 NC |
5923 | Note on targets where the @code{@@} character is the start of a comment (eg |
5924 | ARM) then another character is used instead. For example the ARM port uses the | |
5925 | @code{%} character. | |
5926 | ||
22fe14ad | 5927 | If @var{flags} contains the @code{M} symbol then the @var{type} argument must |
96e9638b | 5928 | be specified as well as an extra argument---@var{entsize}---like this: |
22fe14ad NC |
5929 | |
5930 | @smallexample | |
5931 | .section @var{name} , "@var{flags}"M, @@@var{type}, @var{entsize} | |
5932 | @end smallexample | |
5933 | ||
5934 | Sections with the @code{M} flag but not @code{S} flag must contain fixed size | |
5935 | constants, each @var{entsize} octets long. Sections with both @code{M} and | |
5936 | @code{S} must contain zero terminated strings where each character is | |
5937 | @var{entsize} bytes long. The linker may remove duplicates within sections with | |
5938 | the same name, same entity size and same flags. @var{entsize} must be an | |
90dce00a AM |
5939 | absolute expression. For sections with both @code{M} and @code{S}, a string |
5940 | which is a suffix of a larger string is considered a duplicate. Thus | |
5941 | @code{"def"} will be merged with @code{"abcdef"}; A reference to the first | |
5942 | @code{"def"} will be changed to a reference to @code{"abcdef"+3}. | |
22fe14ad NC |
5943 | |
5944 | If @var{flags} contains the @code{G} symbol then the @var{type} argument must | |
5945 | be present along with an additional field like this: | |
5946 | ||
5947 | @smallexample | |
5948 | .section @var{name} , "@var{flags}"G, @@@var{type}, @var{GroupName}[, @var{linkage}] | |
5949 | @end smallexample | |
5950 | ||
5951 | The @var{GroupName} field specifies the name of the section group to which this | |
5952 | particular section belongs. The optional linkage field can contain: | |
5953 | @table @code | |
5954 | @item comdat | |
5955 | indicates that only one copy of this section should be retained | |
5956 | @item .gnu.linkonce | |
5957 | an alias for comdat | |
5958 | @end table | |
5959 | ||
96e9638b | 5960 | Note: if both the @var{M} and @var{G} flags are present then the fields for |
22fe14ad NC |
5961 | the Merge flag should come first, like this: |
5962 | ||
5963 | @smallexample | |
5964 | .section @var{name} , "@var{flags}"MG, @@@var{type}, @var{entsize}, @var{GroupName}[, @var{linkage}] | |
5965 | @end smallexample | |
ec38dd05 | 5966 | |
01642c12 RM |
5967 | If @var{flags} contains the @code{?} symbol then it may not also contain the |
5968 | @code{G} symbol and the @var{GroupName} or @var{linkage} fields should not be | |
5969 | present. Instead, @code{?} says to consider the section that's current before | |
5970 | this directive. If that section used @code{G}, then the new section will use | |
5971 | @code{G} with those same @var{GroupName} and @var{linkage} fields implicitly. | |
5972 | If not, then the @code{?} symbol has no effect. | |
5973 | ||
252b5132 RH |
5974 | If no flags are specified, the default flags depend upon the section name. If |
5975 | the section name is not recognized, the default will be for the section to have | |
5976 | none of the above flags: it will not be allocated in memory, nor writable, nor | |
5977 | executable. The section will contain data. | |
5978 | ||
5979 | For ELF targets, the assembler supports another type of @code{.section} | |
5980 | directive for compatibility with the Solaris assembler: | |
c91d2e08 | 5981 | |
252b5132 RH |
5982 | @smallexample |
5983 | .section "@var{name}"[, @var{flags}...] | |
5984 | @end smallexample | |
c91d2e08 | 5985 | |
252b5132 RH |
5986 | Note that the section name is quoted. There may be a sequence of comma |
5987 | separated flags: | |
5988 | @table @code | |
5989 | @item #alloc | |
5990 | section is allocatable | |
5991 | @item #write | |
5992 | section is writable | |
5993 | @item #execinstr | |
5994 | section is executable | |
18ae9cc1 L |
5995 | @item #exclude |
5996 | section is excluded from executable and shared library. | |
22fe14ad NC |
5997 | @item #tls |
5998 | section is used for thread local storage | |
252b5132 | 5999 | @end table |
c91d2e08 | 6000 | |
e9863d7f DJ |
6001 | This directive replaces the current section and subsection. See the |
6002 | contents of the gas testsuite directory @code{gas/testsuite/gas/elf} for | |
6003 | some examples of how this directive and the other section stack directives | |
6004 | work. | |
c1253627 NC |
6005 | @end ifset |
6006 | @end ifset | |
252b5132 RH |
6007 | |
6008 | @node Set | |
6009 | @section @code{.set @var{symbol}, @var{expression}} | |
6010 | ||
6011 | @cindex @code{set} directive | |
6012 | @cindex symbol value, setting | |
6013 | Set the value of @var{symbol} to @var{expression}. This | |
6014 | changes @var{symbol}'s value and type to conform to | |
6015 | @var{expression}. If @var{symbol} was flagged as external, it remains | |
6016 | flagged (@pxref{Symbol Attributes}). | |
6017 | ||
6018 | You may @code{.set} a symbol many times in the same assembly. | |
6019 | ||
6020 | If you @code{.set} a global symbol, the value stored in the object | |
6021 | file is the last value stored into it. | |
6022 | ||
3c9b82ba NC |
6023 | @ifset Z80 |
6024 | On Z80 @code{set} is a real instruction, use | |
6025 | @samp{@var{symbol} defl @var{expression}} instead. | |
6026 | @end ifset | |
6027 | ||
252b5132 RH |
6028 | @node Short |
6029 | @section @code{.short @var{expressions}} | |
6030 | ||
6031 | @cindex @code{short} directive | |
6032 | @ifset GENERIC | |
6033 | @code{.short} is normally the same as @samp{.word}. | |
6034 | @xref{Word,,@code{.word}}. | |
6035 | ||
6036 | In some configurations, however, @code{.short} and @code{.word} generate | |
96e9638b | 6037 | numbers of different lengths. @xref{Machine Dependencies}. |
252b5132 RH |
6038 | @end ifset |
6039 | @ifclear GENERIC | |
6040 | @ifset W16 | |
6041 | @code{.short} is the same as @samp{.word}. @xref{Word,,@code{.word}}. | |
6042 | @end ifset | |
6043 | @ifset W32 | |
6044 | This expects zero or more @var{expressions}, and emits | |
6045 | a 16 bit number for each. | |
6046 | @end ifset | |
6047 | @end ifclear | |
6048 | ||
6049 | @node Single | |
6050 | @section @code{.single @var{flonums}} | |
6051 | ||
6052 | @cindex @code{single} directive | |
6053 | @cindex floating point numbers (single) | |
6054 | This directive assembles zero or more flonums, separated by commas. It | |
6055 | has the same effect as @code{.float}. | |
6056 | @ifset GENERIC | |
6057 | The exact kind of floating point numbers emitted depends on how | |
a4fb0134 | 6058 | @command{@value{AS}} is configured. @xref{Machine Dependencies}. |
252b5132 RH |
6059 | @end ifset |
6060 | @ifclear GENERIC | |
6061 | @ifset IEEEFLOAT | |
6062 | On the @value{TARGET} family, @code{.single} emits 32-bit floating point | |
6063 | numbers in @sc{ieee} format. | |
6064 | @end ifset | |
6065 | @end ifclear | |
6066 | ||
c1253627 | 6067 | @ifset COFF-ELF |
252b5132 | 6068 | @node Size |
c1253627 | 6069 | @section @code{.size} |
c91d2e08 | 6070 | |
c1253627 NC |
6071 | This directive is used to set the size associated with a symbol. |
6072 | ||
6073 | @ifset COFF | |
6074 | @ifset ELF | |
6075 | @c only print the extra heading if both COFF and ELF are set | |
6076 | @subheading COFF Version | |
6077 | @end ifset | |
6078 | ||
6079 | @cindex @code{size} directive (COFF version) | |
6080 | For COFF targets, the @code{.size} directive is only permitted inside | |
6081 | @code{.def}/@code{.endef} pairs. It is used like this: | |
6082 | ||
6083 | @smallexample | |
6084 | .size @var{expression} | |
6085 | @end smallexample | |
252b5132 | 6086 | |
c91d2e08 | 6087 | @ifset BOUT |
252b5132 | 6088 | @samp{.size} is only meaningful when generating COFF format output; when |
a4fb0134 | 6089 | @command{@value{AS}} is generating @code{b.out}, it accepts this directive but |
252b5132 RH |
6090 | ignores it. |
6091 | @end ifset | |
c1253627 | 6092 | @end ifset |
c91d2e08 | 6093 | |
c1253627 NC |
6094 | @ifset ELF |
6095 | @ifset COFF | |
6096 | @c only print the extra heading if both COFF and ELF are set | |
6097 | @subheading ELF Version | |
6098 | @end ifset | |
6099 | ||
6100 | @cindex @code{size} directive (ELF version) | |
6101 | For ELF targets, the @code{.size} directive is used like this: | |
c91d2e08 | 6102 | |
c1253627 NC |
6103 | @smallexample |
6104 | .size @var{name} , @var{expression} | |
6105 | @end smallexample | |
6106 | ||
6107 | This directive sets the size associated with a symbol @var{name}. | |
c91d2e08 NC |
6108 | The size in bytes is computed from @var{expression} which can make use of label |
6109 | arithmetic. This directive is typically used to set the size of function | |
6110 | symbols. | |
c1253627 NC |
6111 | @end ifset |
6112 | @end ifset | |
252b5132 | 6113 | |
252b5132 RH |
6114 | @ifclear no-space-dir |
6115 | @node Skip | |
6116 | @section @code{.skip @var{size} , @var{fill}} | |
6117 | ||
6118 | @cindex @code{skip} directive | |
6119 | @cindex filling memory | |
6120 | This directive emits @var{size} bytes, each of value @var{fill}. Both | |
6121 | @var{size} and @var{fill} are absolute expressions. If the comma and | |
6122 | @var{fill} are omitted, @var{fill} is assumed to be zero. This is the same as | |
6123 | @samp{.space}. | |
884f0d36 | 6124 | @end ifclear |
252b5132 | 6125 | |
ccf8a69b BW |
6126 | @node Sleb128 |
6127 | @section @code{.sleb128 @var{expressions}} | |
6128 | ||
6129 | @cindex @code{sleb128} directive | |
01642c12 | 6130 | @var{sleb128} stands for ``signed little endian base 128.'' This is a |
ccf8a69b BW |
6131 | compact, variable length representation of numbers used by the DWARF |
6132 | symbolic debugging format. @xref{Uleb128, ,@code{.uleb128}}. | |
6133 | ||
884f0d36 | 6134 | @ifclear no-space-dir |
252b5132 RH |
6135 | @node Space |
6136 | @section @code{.space @var{size} , @var{fill}} | |
6137 | ||
6138 | @cindex @code{space} directive | |
6139 | @cindex filling memory | |
6140 | This directive emits @var{size} bytes, each of value @var{fill}. Both | |
6141 | @var{size} and @var{fill} are absolute expressions. If the comma | |
6142 | and @var{fill} are omitted, @var{fill} is assumed to be zero. This is the same | |
6143 | as @samp{.skip}. | |
6144 | ||
6145 | @ifset HPPA | |
6146 | @quotation | |
6147 | @emph{Warning:} @code{.space} has a completely different meaning for HPPA | |
6148 | targets; use @code{.block} as a substitute. See @cite{HP9000 Series 800 | |
6149 | Assembly Language Reference Manual} (HP 92432-90001) for the meaning of the | |
6150 | @code{.space} directive. @xref{HPPA Directives,,HPPA Assembler Directives}, | |
6151 | for a summary. | |
6152 | @end quotation | |
6153 | @end ifset | |
6154 | @end ifclear | |
6155 | ||
252b5132 RH |
6156 | @ifset have-stabs |
6157 | @node Stab | |
6158 | @section @code{.stabd, .stabn, .stabs} | |
6159 | ||
6160 | @cindex symbolic debuggers, information for | |
6161 | @cindex @code{stab@var{x}} directives | |
6162 | There are three directives that begin @samp{.stab}. | |
6163 | All emit symbols (@pxref{Symbols}), for use by symbolic debuggers. | |
a4fb0134 | 6164 | The symbols are not entered in the @command{@value{AS}} hash table: they |
252b5132 RH |
6165 | cannot be referenced elsewhere in the source file. |
6166 | Up to five fields are required: | |
6167 | ||
6168 | @table @var | |
6169 | @item string | |
6170 | This is the symbol's name. It may contain any character except | |
6171 | @samp{\000}, so is more general than ordinary symbol names. Some | |
6172 | debuggers used to code arbitrarily complex structures into symbol names | |
6173 | using this field. | |
6174 | ||
6175 | @item type | |
6176 | An absolute expression. The symbol's type is set to the low 8 bits of | |
6177 | this expression. Any bit pattern is permitted, but @code{@value{LD}} | |
6178 | and debuggers choke on silly bit patterns. | |
6179 | ||
6180 | @item other | |
6181 | An absolute expression. The symbol's ``other'' attribute is set to the | |
6182 | low 8 bits of this expression. | |
6183 | ||
6184 | @item desc | |
6185 | An absolute expression. The symbol's descriptor is set to the low 16 | |
6186 | bits of this expression. | |
6187 | ||
6188 | @item value | |
6189 | An absolute expression which becomes the symbol's value. | |
6190 | @end table | |
6191 | ||
6192 | If a warning is detected while reading a @code{.stabd}, @code{.stabn}, | |
6193 | or @code{.stabs} statement, the symbol has probably already been created; | |
6194 | you get a half-formed symbol in your object file. This is | |
6195 | compatible with earlier assemblers! | |
6196 | ||
6197 | @table @code | |
6198 | @cindex @code{stabd} directive | |
6199 | @item .stabd @var{type} , @var{other} , @var{desc} | |
6200 | ||
6201 | The ``name'' of the symbol generated is not even an empty string. | |
6202 | It is a null pointer, for compatibility. Older assemblers used a | |
6203 | null pointer so they didn't waste space in object files with empty | |
6204 | strings. | |
6205 | ||
6206 | The symbol's value is set to the location counter, | |
6207 | relocatably. When your program is linked, the value of this symbol | |
6208 | is the address of the location counter when the @code{.stabd} was | |
6209 | assembled. | |
6210 | ||
6211 | @cindex @code{stabn} directive | |
6212 | @item .stabn @var{type} , @var{other} , @var{desc} , @var{value} | |
6213 | The name of the symbol is set to the empty string @code{""}. | |
6214 | ||
6215 | @cindex @code{stabs} directive | |
6216 | @item .stabs @var{string} , @var{type} , @var{other} , @var{desc} , @var{value} | |
6217 | All five fields are specified. | |
6218 | @end table | |
6219 | @end ifset | |
6220 | @c end have-stabs | |
6221 | ||
6222 | @node String | |
38a57ae7 | 6223 | @section @code{.string} "@var{str}", @code{.string8} "@var{str}", @code{.string16} |
01642c12 | 6224 | "@var{str}", @code{.string32} "@var{str}", @code{.string64} "@var{str}" |
252b5132 RH |
6225 | |
6226 | @cindex string, copying to object file | |
38a57ae7 NC |
6227 | @cindex string8, copying to object file |
6228 | @cindex string16, copying to object file | |
6229 | @cindex string32, copying to object file | |
6230 | @cindex string64, copying to object file | |
252b5132 | 6231 | @cindex @code{string} directive |
38a57ae7 NC |
6232 | @cindex @code{string8} directive |
6233 | @cindex @code{string16} directive | |
6234 | @cindex @code{string32} directive | |
6235 | @cindex @code{string64} directive | |
252b5132 RH |
6236 | |
6237 | Copy the characters in @var{str} to the object file. You may specify more than | |
6238 | one string to copy, separated by commas. Unless otherwise specified for a | |
6239 | particular machine, the assembler marks the end of each string with a 0 byte. | |
6240 | You can use any of the escape sequences described in @ref{Strings,,Strings}. | |
6241 | ||
01642c12 | 6242 | The variants @code{string16}, @code{string32} and @code{string64} differ from |
38a57ae7 NC |
6243 | the @code{string} pseudo opcode in that each 8-bit character from @var{str} is |
6244 | copied and expanded to 16, 32 or 64 bits respectively. The expanded characters | |
6245 | are stored in target endianness byte order. | |
6246 | ||
6247 | Example: | |
6248 | @smallexample | |
6249 | .string32 "BYE" | |
6250 | expands to: | |
6251 | .string "B\0\0\0Y\0\0\0E\0\0\0" /* On little endian targets. */ | |
6252 | .string "\0\0\0B\0\0\0Y\0\0\0E" /* On big endian targets. */ | |
6253 | @end smallexample | |
6254 | ||
6255 | ||
252b5132 RH |
6256 | @node Struct |
6257 | @section @code{.struct @var{expression}} | |
6258 | ||
6259 | @cindex @code{struct} directive | |
6260 | Switch to the absolute section, and set the section offset to @var{expression}, | |
6261 | which must be an absolute expression. You might use this as follows: | |
6262 | @smallexample | |
6263 | .struct 0 | |
6264 | field1: | |
6265 | .struct field1 + 4 | |
6266 | field2: | |
6267 | .struct field2 + 4 | |
6268 | field3: | |
6269 | @end smallexample | |
6270 | This would define the symbol @code{field1} to have the value 0, the symbol | |
6271 | @code{field2} to have the value 4, and the symbol @code{field3} to have the | |
6272 | value 8. Assembly would be left in the absolute section, and you would need to | |
6273 | use a @code{.section} directive of some sort to change to some other section | |
6274 | before further assembly. | |
6275 | ||
c91d2e08 NC |
6276 | @ifset ELF |
6277 | @node SubSection | |
6278 | @section @code{.subsection @var{name}} | |
6279 | ||
c1253627 | 6280 | @cindex @code{subsection} directive |
c91d2e08 NC |
6281 | @cindex Section Stack |
6282 | This is one of the ELF section stack manipulation directives. The others are | |
01642c12 RM |
6283 | @code{.section} (@pxref{Section}), @code{.pushsection} (@pxref{PushSection}), |
6284 | @code{.popsection} (@pxref{PopSection}), and @code{.previous} | |
a349d9dd | 6285 | (@pxref{Previous}). |
c91d2e08 NC |
6286 | |
6287 | This directive replaces the current subsection with @code{name}. The current | |
6288 | section is not changed. The replaced subsection is put onto the section stack | |
6289 | in place of the then current top of stack subsection. | |
c91d2e08 NC |
6290 | @end ifset |
6291 | ||
252b5132 RH |
6292 | @ifset ELF |
6293 | @node Symver | |
6294 | @section @code{.symver} | |
6295 | @cindex @code{symver} directive | |
6296 | @cindex symbol versioning | |
6297 | @cindex versions of symbols | |
6298 | Use the @code{.symver} directive to bind symbols to specific version nodes | |
6299 | within a source file. This is only supported on ELF platforms, and is | |
6300 | typically used when assembling files to be linked into a shared library. | |
6301 | There are cases where it may make sense to use this in objects to be bound | |
6302 | into an application itself so as to override a versioned symbol from a | |
6303 | shared library. | |
6304 | ||
79082ff0 | 6305 | For ELF targets, the @code{.symver} directive can be used like this: |
252b5132 RH |
6306 | @smallexample |
6307 | .symver @var{name}, @var{name2@@nodename} | |
6308 | @end smallexample | |
339681c0 | 6309 | If the symbol @var{name} is defined within the file |
79082ff0 | 6310 | being assembled, the @code{.symver} directive effectively creates a symbol |
252b5132 RH |
6311 | alias with the name @var{name2@@nodename}, and in fact the main reason that we |
6312 | just don't try and create a regular alias is that the @var{@@} character isn't | |
6313 | permitted in symbol names. The @var{name2} part of the name is the actual name | |
6314 | of the symbol by which it will be externally referenced. The name @var{name} | |
6315 | itself is merely a name of convenience that is used so that it is possible to | |
6316 | have definitions for multiple versions of a function within a single source | |
6317 | file, and so that the compiler can unambiguously know which version of a | |
6318 | function is being mentioned. The @var{nodename} portion of the alias should be | |
6319 | the name of a node specified in the version script supplied to the linker when | |
6320 | building a shared library. If you are attempting to override a versioned | |
6321 | symbol from a shared library, then @var{nodename} should correspond to the | |
6322 | nodename of the symbol you are trying to override. | |
339681c0 L |
6323 | |
6324 | If the symbol @var{name} is not defined within the file being assembled, all | |
6325 | references to @var{name} will be changed to @var{name2@@nodename}. If no | |
6326 | reference to @var{name} is made, @var{name2@@nodename} will be removed from the | |
6327 | symbol table. | |
79082ff0 L |
6328 | |
6329 | Another usage of the @code{.symver} directive is: | |
6330 | @smallexample | |
6331 | .symver @var{name}, @var{name2@@@@nodename} | |
6332 | @end smallexample | |
6333 | In this case, the symbol @var{name} must exist and be defined within | |
a349d9dd | 6334 | the file being assembled. It is similar to @var{name2@@nodename}. The |
79082ff0 L |
6335 | difference is @var{name2@@@@nodename} will also be used to resolve |
6336 | references to @var{name2} by the linker. | |
6337 | ||
6338 | The third usage of the @code{.symver} directive is: | |
6339 | @smallexample | |
6340 | .symver @var{name}, @var{name2@@@@@@nodename} | |
6341 | @end smallexample | |
6342 | When @var{name} is not defined within the | |
6343 | file being assembled, it is treated as @var{name2@@nodename}. When | |
6344 | @var{name} is defined within the file being assembled, the symbol | |
6345 | name, @var{name}, will be changed to @var{name2@@@@nodename}. | |
252b5132 RH |
6346 | @end ifset |
6347 | ||
6348 | @ifset COFF | |
6349 | @node Tag | |
6350 | @section @code{.tag @var{structname}} | |
6351 | ||
6352 | @cindex COFF structure debugging | |
6353 | @cindex structure debugging, COFF | |
6354 | @cindex @code{tag} directive | |
6355 | This directive is generated by compilers to include auxiliary debugging | |
6356 | information in the symbol table. It is only permitted inside | |
6357 | @code{.def}/@code{.endef} pairs. Tags are used to link structure | |
6358 | definitions in the symbol table with instances of those structures. | |
6359 | @ifset BOUT | |
6360 | ||
6361 | @samp{.tag} is only used when generating COFF format output; when | |
a4fb0134 | 6362 | @command{@value{AS}} is generating @code{b.out}, it accepts this directive but |
252b5132 RH |
6363 | ignores it. |
6364 | @end ifset | |
6365 | @end ifset | |
6366 | ||
6367 | @node Text | |
6368 | @section @code{.text @var{subsection}} | |
6369 | ||
6370 | @cindex @code{text} directive | |
a4fb0134 | 6371 | Tells @command{@value{AS}} to assemble the following statements onto the end of |
252b5132 RH |
6372 | the text subsection numbered @var{subsection}, which is an absolute |
6373 | expression. If @var{subsection} is omitted, subsection number zero | |
6374 | is used. | |
6375 | ||
6376 | @node Title | |
6377 | @section @code{.title "@var{heading}"} | |
6378 | ||
6379 | @cindex @code{title} directive | |
6380 | @cindex listing control: title line | |
6381 | Use @var{heading} as the title (second line, immediately after the | |
6382 | source file name and pagenumber) when generating assembly listings. | |
6383 | ||
6384 | This directive affects subsequent pages, as well as the current page if | |
6385 | it appears within ten lines of the top of a page. | |
6386 | ||
c1253627 | 6387 | @ifset COFF-ELF |
252b5132 | 6388 | @node Type |
c1253627 NC |
6389 | @section @code{.type} |
6390 | ||
6391 | This directive is used to set the type of a symbol. | |
6392 | ||
6393 | @ifset COFF | |
6394 | @ifset ELF | |
6395 | @c only print the extra heading if both COFF and ELF are set | |
6396 | @subheading COFF Version | |
6397 | @end ifset | |
252b5132 RH |
6398 | |
6399 | @cindex COFF symbol type | |
6400 | @cindex symbol type, COFF | |
c1253627 NC |
6401 | @cindex @code{type} directive (COFF version) |
6402 | For COFF targets, this directive is permitted only within | |
6403 | @code{.def}/@code{.endef} pairs. It is used like this: | |
6404 | ||
6405 | @smallexample | |
6406 | .type @var{int} | |
6407 | @end smallexample | |
6408 | ||
6409 | This records the integer @var{int} as the type attribute of a symbol table | |
6410 | entry. | |
252b5132 | 6411 | |
c91d2e08 | 6412 | @ifset BOUT |
252b5132 | 6413 | @samp{.type} is associated only with COFF format output; when |
a4fb0134 | 6414 | @command{@value{AS}} is configured for @code{b.out} output, it accepts this |
252b5132 RH |
6415 | directive but ignores it. |
6416 | @end ifset | |
c1253627 | 6417 | @end ifset |
c91d2e08 | 6418 | |
c1253627 NC |
6419 | @ifset ELF |
6420 | @ifset COFF | |
6421 | @c only print the extra heading if both COFF and ELF are set | |
6422 | @subheading ELF Version | |
6423 | @end ifset | |
c91d2e08 NC |
6424 | |
6425 | @cindex ELF symbol type | |
6426 | @cindex symbol type, ELF | |
c1253627 NC |
6427 | @cindex @code{type} directive (ELF version) |
6428 | For ELF targets, the @code{.type} directive is used like this: | |
6429 | ||
6430 | @smallexample | |
6431 | .type @var{name} , @var{type description} | |
6432 | @end smallexample | |
6433 | ||
6434 | This sets the type of symbol @var{name} to be either a | |
a349d9dd | 6435 | function symbol or an object symbol. There are five different syntaxes |
c91d2e08 | 6436 | supported for the @var{type description} field, in order to provide |
28c9d252 | 6437 | compatibility with various other assemblers. |
58ab4f3d MM |
6438 | |
6439 | Because some of the characters used in these syntaxes (such as @samp{@@} and | |
6440 | @samp{#}) are comment characters for some architectures, some of the syntaxes | |
6441 | below do not work on all architectures. The first variant will be accepted by | |
6442 | the GNU assembler on all architectures so that variant should be used for | |
6443 | maximum portability, if you do not need to assemble your code with other | |
6444 | assemblers. | |
6445 | ||
6446 | The syntaxes supported are: | |
c91d2e08 NC |
6447 | |
6448 | @smallexample | |
5671778d NC |
6449 | .type <name> STT_<TYPE_IN_UPPER_CASE> |
6450 | .type <name>,#<type> | |
6451 | .type <name>,@@<type> | |
e7c33416 | 6452 | .type <name>,%<type> |
5671778d NC |
6453 | .type <name>,"<type>" |
6454 | @end smallexample | |
6455 | ||
6456 | The types supported are: | |
58ab4f3d | 6457 | |
5671778d NC |
6458 | @table @gcctabopt |
6459 | @item STT_FUNC | |
6460 | @itemx function | |
6461 | Mark the symbol as being a function name. | |
c91d2e08 | 6462 | |
d8045f23 NC |
6463 | @item STT_GNU_IFUNC |
6464 | @itemx gnu_indirect_function | |
6465 | Mark the symbol as an indirect function when evaluated during reloc | |
6466 | processing. (This is only supported on Linux targeted assemblers). | |
6467 | ||
5671778d NC |
6468 | @item STT_OBJECT |
6469 | @itemx object | |
6470 | Mark the symbol as being a data object. | |
6471 | ||
6472 | @item STT_TLS | |
6473 | @itemx tls_object | |
6474 | Mark the symbol as being a thead-local data object. | |
6475 | ||
6476 | @item STT_COMMON | |
6477 | @itemx common | |
6478 | Mark the symbol as being a common data object. | |
e7c33416 NC |
6479 | |
6480 | @item STT_NOTYPE | |
6481 | @itemx notype | |
6482 | Does not mark the symbol in any way. It is supported just for completeness. | |
6483 | ||
3e7a7d11 NC |
6484 | @item gnu_unique_object |
6485 | Marks the symbol as being a globally unique data object. The dynamic linker | |
6486 | will make sure that in the entire process there is just one symbol with this | |
6487 | name and type in use. (This is only supported on Linux targeted assemblers). | |
6488 | ||
5671778d NC |
6489 | @end table |
6490 | ||
6491 | Note: Some targets support extra types in addition to those listed above. | |
c91d2e08 | 6492 | |
c1253627 NC |
6493 | @end ifset |
6494 | @end ifset | |
c91d2e08 NC |
6495 | |
6496 | @node Uleb128 | |
6497 | @section @code{.uleb128 @var{expressions}} | |
6498 | ||
6499 | @cindex @code{uleb128} directive | |
01642c12 | 6500 | @var{uleb128} stands for ``unsigned little endian base 128.'' This is a |
c91d2e08 | 6501 | compact, variable length representation of numbers used by the DWARF |
96e9638b | 6502 | symbolic debugging format. @xref{Sleb128, ,@code{.sleb128}}. |
252b5132 RH |
6503 | |
6504 | @ifset COFF | |
6505 | @node Val | |
6506 | @section @code{.val @var{addr}} | |
6507 | ||
6508 | @cindex @code{val} directive | |
6509 | @cindex COFF value attribute | |
6510 | @cindex value attribute, COFF | |
6511 | This directive, permitted only within @code{.def}/@code{.endef} pairs, | |
6512 | records the address @var{addr} as the value attribute of a symbol table | |
6513 | entry. | |
6514 | @ifset BOUT | |
6515 | ||
a4fb0134 | 6516 | @samp{.val} is used only for COFF output; when @command{@value{AS}} is |
252b5132 RH |
6517 | configured for @code{b.out}, it accepts this directive but ignores it. |
6518 | @end ifset | |
6519 | @end ifset | |
6520 | ||
2e13b764 | 6521 | @ifset ELF |
c91d2e08 NC |
6522 | @node Version |
6523 | @section @code{.version "@var{string}"} | |
2e13b764 | 6524 | |
c1253627 | 6525 | @cindex @code{version} directive |
c91d2e08 NC |
6526 | This directive creates a @code{.note} section and places into it an ELF |
6527 | formatted note of type NT_VERSION. The note's name is set to @code{string}. | |
9a297610 | 6528 | @end ifset |
2e13b764 | 6529 | |
c91d2e08 NC |
6530 | @ifset ELF |
6531 | @node VTableEntry | |
6532 | @section @code{.vtable_entry @var{table}, @var{offset}} | |
2e13b764 | 6533 | |
653cfe85 | 6534 | @cindex @code{vtable_entry} directive |
c91d2e08 NC |
6535 | This directive finds or creates a symbol @code{table} and creates a |
6536 | @code{VTABLE_ENTRY} relocation for it with an addend of @code{offset}. | |
2e13b764 | 6537 | |
c91d2e08 NC |
6538 | @node VTableInherit |
6539 | @section @code{.vtable_inherit @var{child}, @var{parent}} | |
2e13b764 | 6540 | |
653cfe85 | 6541 | @cindex @code{vtable_inherit} directive |
c91d2e08 NC |
6542 | This directive finds the symbol @code{child} and finds or creates the symbol |
6543 | @code{parent} and then creates a @code{VTABLE_INHERIT} relocation for the | |
a349d9dd | 6544 | parent whose addend is the value of the child symbol. As a special case the |
96e9638b | 6545 | parent name of @code{0} is treated as referring to the @code{*ABS*} section. |
c91d2e08 | 6546 | @end ifset |
2e13b764 | 6547 | |
d190d046 HPN |
6548 | @node Warning |
6549 | @section @code{.warning "@var{string}"} | |
6550 | @cindex warning directive | |
6551 | Similar to the directive @code{.error} | |
6552 | (@pxref{Error,,@code{.error "@var{string}"}}), but just emits a warning. | |
6553 | ||
c91d2e08 NC |
6554 | @node Weak |
6555 | @section @code{.weak @var{names}} | |
2e13b764 | 6556 | |
c1253627 | 6557 | @cindex @code{weak} directive |
a349d9dd | 6558 | This directive sets the weak attribute on the comma separated list of symbol |
c91d2e08 | 6559 | @code{names}. If the symbols do not already exist, they will be created. |
c87db184 | 6560 | |
01642c12 | 6561 | On COFF targets other than PE, weak symbols are a GNU extension. This |
977cdf5a | 6562 | directive sets the weak attribute on the comma separated list of symbol |
c87db184 CF |
6563 | @code{names}. If the symbols do not already exist, they will be created. |
6564 | ||
977cdf5a | 6565 | On the PE target, weak symbols are supported natively as weak aliases. |
01642c12 | 6566 | When a weak symbol is created that is not an alias, GAS creates an |
977cdf5a | 6567 | alternate symbol to hold the default value. |
2e13b764 | 6568 | |
06e77878 AO |
6569 | @node Weakref |
6570 | @section @code{.weakref @var{alias}, @var{target}} | |
6571 | ||
6572 | @cindex @code{weakref} directive | |
6573 | This directive creates an alias to the target symbol that enables the symbol to | |
6574 | be referenced with weak-symbol semantics, but without actually making it weak. | |
6575 | If direct references or definitions of the symbol are present, then the symbol | |
6576 | will not be weak, but if all references to it are through weak references, the | |
6577 | symbol will be marked as weak in the symbol table. | |
6578 | ||
6579 | The effect is equivalent to moving all references to the alias to a separate | |
6580 | assembly source file, renaming the alias to the symbol in it, declaring the | |
6581 | symbol as weak there, and running a reloadable link to merge the object files | |
6582 | resulting from the assembly of the new source file and the old source file that | |
6583 | had the references to the alias removed. | |
6584 | ||
6585 | The alias itself never makes to the symbol table, and is entirely handled | |
6586 | within the assembler. | |
6587 | ||
252b5132 RH |
6588 | @node Word |
6589 | @section @code{.word @var{expressions}} | |
6590 | ||
6591 | @cindex @code{word} directive | |
6592 | This directive expects zero or more @var{expressions}, of any section, | |
6593 | separated by commas. | |
6594 | @ifclear GENERIC | |
6595 | @ifset W32 | |
a4fb0134 | 6596 | For each expression, @command{@value{AS}} emits a 32-bit number. |
252b5132 RH |
6597 | @end ifset |
6598 | @ifset W16 | |
a4fb0134 | 6599 | For each expression, @command{@value{AS}} emits a 16-bit number. |
252b5132 RH |
6600 | @end ifset |
6601 | @end ifclear | |
6602 | @ifset GENERIC | |
6603 | ||
6604 | The size of the number emitted, and its byte order, | |
6605 | depend on what target computer the assembly is for. | |
6606 | @end ifset | |
6607 | ||
6608 | @c on amd29k, i960, sparc the "special treatment to support compilers" doesn't | |
6609 | @c happen---32-bit addressability, period; no long/short jumps. | |
6610 | @ifset DIFF-TBL-KLUGE | |
6611 | @cindex difference tables altered | |
6612 | @cindex altered difference tables | |
6613 | @quotation | |
6614 | @emph{Warning: Special Treatment to support Compilers} | |
6615 | @end quotation | |
6616 | ||
6617 | @ifset GENERIC | |
6618 | Machines with a 32-bit address space, but that do less than 32-bit | |
6619 | addressing, require the following special treatment. If the machine of | |
6620 | interest to you does 32-bit addressing (or doesn't require it; | |
6621 | @pxref{Machine Dependencies}), you can ignore this issue. | |
6622 | ||
6623 | @end ifset | |
6624 | In order to assemble compiler output into something that works, | |
a4fb0134 | 6625 | @command{@value{AS}} occasionally does strange things to @samp{.word} directives. |
252b5132 | 6626 | Directives of the form @samp{.word sym1-sym2} are often emitted by |
a4fb0134 | 6627 | compilers as part of jump tables. Therefore, when @command{@value{AS}} assembles a |
252b5132 | 6628 | directive of the form @samp{.word sym1-sym2}, and the difference between |
a4fb0134 | 6629 | @code{sym1} and @code{sym2} does not fit in 16 bits, @command{@value{AS}} |
252b5132 RH |
6630 | creates a @dfn{secondary jump table}, immediately before the next label. |
6631 | This secondary jump table is preceded by a short-jump to the | |
6632 | first byte after the secondary table. This short-jump prevents the flow | |
6633 | of control from accidentally falling into the new table. Inside the | |
6634 | table is a long-jump to @code{sym2}. The original @samp{.word} | |
6635 | contains @code{sym1} minus the address of the long-jump to | |
6636 | @code{sym2}. | |
6637 | ||
6638 | If there were several occurrences of @samp{.word sym1-sym2} before the | |
6639 | secondary jump table, all of them are adjusted. If there was a | |
6640 | @samp{.word sym3-sym4}, that also did not fit in sixteen bits, a | |
6641 | long-jump to @code{sym4} is included in the secondary jump table, | |
6642 | and the @code{.word} directives are adjusted to contain @code{sym3} | |
6643 | minus the address of the long-jump to @code{sym4}; and so on, for as many | |
6644 | entries in the original jump table as necessary. | |
6645 | ||
6646 | @ifset INTERNALS | |
a4fb0134 | 6647 | @emph{This feature may be disabled by compiling @command{@value{AS}} with the |
252b5132 RH |
6648 | @samp{-DWORKING_DOT_WORD} option.} This feature is likely to confuse |
6649 | assembly language programmers. | |
6650 | @end ifset | |
6651 | @end ifset | |
6652 | @c end DIFF-TBL-KLUGE | |
6653 | ||
6654 | @node Deprecated | |
6655 | @section Deprecated Directives | |
6656 | ||
6657 | @cindex deprecated directives | |
6658 | @cindex obsolescent directives | |
6659 | One day these directives won't work. | |
6660 | They are included for compatibility with older assemblers. | |
6661 | @table @t | |
6662 | @item .abort | |
6663 | @item .line | |
6664 | @end table | |
6665 | ||
3a99f02f DJ |
6666 | @ifset ELF |
6667 | @node Object Attributes | |
6668 | @chapter Object Attributes | |
6669 | @cindex object attributes | |
6670 | ||
6671 | @command{@value{AS}} assembles source files written for a specific architecture | |
6672 | into object files for that architecture. But not all object files are alike. | |
6673 | Many architectures support incompatible variations. For instance, floating | |
6674 | point arguments might be passed in floating point registers if the object file | |
6675 | requires hardware floating point support---or floating point arguments might be | |
6676 | passed in integer registers if the object file supports processors with no | |
6677 | hardware floating point unit. Or, if two objects are built for different | |
6678 | generations of the same architecture, the combination may require the | |
6679 | newer generation at run-time. | |
6680 | ||
6681 | This information is useful during and after linking. At link time, | |
6682 | @command{@value{LD}} can warn about incompatible object files. After link | |
6683 | time, tools like @command{gdb} can use it to process the linked file | |
6684 | correctly. | |
6685 | ||
6686 | Compatibility information is recorded as a series of object attributes. Each | |
6687 | attribute has a @dfn{vendor}, @dfn{tag}, and @dfn{value}. The vendor is a | |
6688 | string, and indicates who sets the meaning of the tag. The tag is an integer, | |
6689 | and indicates what property the attribute describes. The value may be a string | |
6690 | or an integer, and indicates how the property affects this object. Missing | |
6691 | attributes are the same as attributes with a zero value or empty string value. | |
6692 | ||
6693 | Object attributes were developed as part of the ABI for the ARM Architecture. | |
6694 | The file format is documented in @cite{ELF for the ARM Architecture}. | |
6695 | ||
6696 | @menu | |
6697 | * GNU Object Attributes:: @sc{gnu} Object Attributes | |
6698 | * Defining New Object Attributes:: Defining New Object Attributes | |
6699 | @end menu | |
6700 | ||
6701 | @node GNU Object Attributes | |
6702 | @section @sc{gnu} Object Attributes | |
6703 | ||
6704 | The @code{.gnu_attribute} directive records an object attribute | |
6705 | with vendor @samp{gnu}. | |
6706 | ||
6707 | Except for @samp{Tag_compatibility}, which has both an integer and a string for | |
6708 | its value, @sc{gnu} attributes have a string value if the tag number is odd and | |
6709 | an integer value if the tag number is even. The second bit (@code{@var{tag} & | |
6710 | 2} is set for architecture-independent attributes and clear for | |
6711 | architecture-dependent ones. | |
6712 | ||
6713 | @subsection Common @sc{gnu} attributes | |
6714 | ||
6715 | These attributes are valid on all architectures. | |
6716 | ||
6717 | @table @r | |
6718 | @item Tag_compatibility (32) | |
6719 | The compatibility attribute takes an integer flag value and a vendor name. If | |
6720 | the flag value is 0, the file is compatible with other toolchains. If it is 1, | |
6721 | then the file is only compatible with the named toolchain. If it is greater | |
6722 | than 1, the file can only be processed by other toolchains under some private | |
6723 | arrangement indicated by the flag value and the vendor name. | |
6724 | @end table | |
6725 | ||
6726 | @subsection MIPS Attributes | |
6727 | ||
6728 | @table @r | |
6729 | @item Tag_GNU_MIPS_ABI_FP (4) | |
6730 | The floating-point ABI used by this object file. The value will be: | |
6731 | ||
6732 | @itemize @bullet | |
6733 | @item | |
6734 | 0 for files not affected by the floating-point ABI. | |
6735 | @item | |
6736 | 1 for files using the hardware floating-point with a standard double-precision | |
6737 | FPU. | |
6738 | @item | |
6739 | 2 for files using the hardware floating-point ABI with a single-precision FPU. | |
6740 | @item | |
6741 | 3 for files using the software floating-point ABI. | |
42554f6a TS |
6742 | @item |
6743 | 4 for files using the hardware floating-point ABI with 64-bit wide | |
6744 | double-precision floating-point registers and 32-bit wide general | |
6745 | purpose registers. | |
3a99f02f DJ |
6746 | @end itemize |
6747 | @end table | |
6748 | ||
6749 | @subsection PowerPC Attributes | |
6750 | ||
6751 | @table @r | |
6752 | @item Tag_GNU_Power_ABI_FP (4) | |
6753 | The floating-point ABI used by this object file. The value will be: | |
6754 | ||
6755 | @itemize @bullet | |
6756 | @item | |
6757 | 0 for files not affected by the floating-point ABI. | |
6758 | @item | |
3c7b9897 | 6759 | 1 for files using double-precision hardware floating-point ABI. |
3a99f02f DJ |
6760 | @item |
6761 | 2 for files using the software floating-point ABI. | |
3c7b9897 AM |
6762 | @item |
6763 | 3 for files using single-precision hardware floating-point ABI. | |
3a99f02f DJ |
6764 | @end itemize |
6765 | ||
6766 | @item Tag_GNU_Power_ABI_Vector (8) | |
6767 | The vector ABI used by this object file. The value will be: | |
6768 | ||
6769 | @itemize @bullet | |
6770 | @item | |
6771 | 0 for files not affected by the vector ABI. | |
6772 | @item | |
6773 | 1 for files using general purpose registers to pass vectors. | |
6774 | @item | |
6775 | 2 for files using AltiVec registers to pass vectors. | |
6776 | @item | |
6777 | 3 for files using SPE registers to pass vectors. | |
6778 | @end itemize | |
6779 | @end table | |
6780 | ||
6781 | @node Defining New Object Attributes | |
6782 | @section Defining New Object Attributes | |
6783 | ||
6784 | If you want to define a new @sc{gnu} object attribute, here are the places you | |
6785 | will need to modify. New attributes should be discussed on the @samp{binutils} | |
6786 | mailing list. | |
6787 | ||
6788 | @itemize @bullet | |
6789 | @item | |
6790 | This manual, which is the official register of attributes. | |
6791 | @item | |
6792 | The header for your architecture @file{include/elf}, to define the tag. | |
6793 | @item | |
6794 | The @file{bfd} support file for your architecture, to merge the attribute | |
6795 | and issue any appropriate link warnings. | |
6796 | @item | |
6797 | Test cases in @file{ld/testsuite} for merging and link warnings. | |
6798 | @item | |
6799 | @file{binutils/readelf.c} to display your attribute. | |
6800 | @item | |
6801 | GCC, if you want the compiler to mark the attribute automatically. | |
6802 | @end itemize | |
6803 | ||
6804 | @end ifset | |
6805 | ||
252b5132 RH |
6806 | @ifset GENERIC |
6807 | @node Machine Dependencies | |
6808 | @chapter Machine Dependent Features | |
6809 | ||
6810 | @cindex machine dependencies | |
6811 | The machine instruction sets are (almost by definition) different on | |
a4fb0134 SC |
6812 | each machine where @command{@value{AS}} runs. Floating point representations |
6813 | vary as well, and @command{@value{AS}} often supports a few additional | |
252b5132 RH |
6814 | directives or command-line options for compatibility with other |
6815 | assemblers on a particular platform. Finally, some versions of | |
a4fb0134 | 6816 | @command{@value{AS}} support special pseudo-instructions for branch |
252b5132 RH |
6817 | optimization. |
6818 | ||
6819 | This chapter discusses most of these differences, though it does not | |
6820 | include details on any machine's instruction set. For details on that | |
6821 | subject, see the hardware manufacturer's manual. | |
6822 | ||
6823 | @menu | |
625e1353 RH |
6824 | @ifset ALPHA |
6825 | * Alpha-Dependent:: Alpha Dependent Features | |
6826 | @end ifset | |
252b5132 RH |
6827 | @ifset ARC |
6828 | * ARC-Dependent:: ARC Dependent Features | |
6829 | @end ifset | |
6830 | @ifset ARM | |
6831 | * ARM-Dependent:: ARM Dependent Features | |
6832 | @end ifset | |
8473f7a4 DC |
6833 | @ifset AVR |
6834 | * AVR-Dependent:: AVR Dependent Features | |
6835 | @end ifset | |
3b4e1885 JZ |
6836 | @ifset Blackfin |
6837 | * Blackfin-Dependent:: Blackfin Dependent Features | |
07c1b327 | 6838 | @end ifset |
3d3d428f NC |
6839 | @ifset CR16 |
6840 | * CR16-Dependent:: CR16 Dependent Features | |
6841 | @end ifset | |
8bf549a8 | 6842 | @ifset CRIS |
328eb32e HPN |
6843 | * CRIS-Dependent:: CRIS Dependent Features |
6844 | @end ifset | |
252b5132 RH |
6845 | @ifset D10V |
6846 | * D10V-Dependent:: D10V Dependent Features | |
6847 | @end ifset | |
6848 | @ifset D30V | |
6849 | * D30V-Dependent:: D30V Dependent Features | |
6850 | @end ifset | |
6851 | @ifset H8/300 | |
c2dcd04e | 6852 | * H8/300-Dependent:: Renesas H8/300 Dependent Features |
252b5132 | 6853 | @end ifset |
252b5132 RH |
6854 | @ifset HPPA |
6855 | * HPPA-Dependent:: HPPA Dependent Features | |
6856 | @end ifset | |
5b93d8bb AM |
6857 | @ifset I370 |
6858 | * ESA/390-Dependent:: IBM ESA/390 Dependent Features | |
6859 | @end ifset | |
252b5132 | 6860 | @ifset I80386 |
55b62671 | 6861 | * i386-Dependent:: Intel 80386 and AMD x86-64 Dependent Features |
252b5132 | 6862 | @end ifset |
e3308d0d JE |
6863 | @ifset I860 |
6864 | * i860-Dependent:: Intel 80860 Dependent Features | |
6865 | @end ifset | |
252b5132 RH |
6866 | @ifset I960 |
6867 | * i960-Dependent:: Intel 80960 Dependent Features | |
6868 | @end ifset | |
5cb53c21 L |
6869 | @ifset IA64 |
6870 | * IA-64-Dependent:: Intel IA-64 Dependent Features | |
6871 | @end ifset | |
a40cbfa3 NC |
6872 | @ifset IP2K |
6873 | * IP2K-Dependent:: IP2K Dependent Features | |
6874 | @end ifset | |
84e94c90 NC |
6875 | @ifset LM32 |
6876 | * LM32-Dependent:: LM32 Dependent Features | |
6877 | @end ifset | |
49f58d10 JB |
6878 | @ifset M32C |
6879 | * M32C-Dependent:: M32C Dependent Features | |
6880 | @end ifset | |
ec694b89 NC |
6881 | @ifset M32R |
6882 | * M32R-Dependent:: M32R Dependent Features | |
6883 | @end ifset | |
252b5132 RH |
6884 | @ifset M680X0 |
6885 | * M68K-Dependent:: M680x0 Dependent Features | |
6886 | @end ifset | |
60bcf0fa NC |
6887 | @ifset M68HC11 |
6888 | * M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features | |
6889 | @end ifset | |
7ba29e2a NC |
6890 | @ifset MICROBLAZE |
6891 | * MicroBlaze-Dependent:: MICROBLAZE Dependent Features | |
6892 | @end ifset | |
252b5132 RH |
6893 | @ifset MIPS |
6894 | * MIPS-Dependent:: MIPS Dependent Features | |
6895 | @end ifset | |
3c3bdf30 NC |
6896 | @ifset MMIX |
6897 | * MMIX-Dependent:: MMIX Dependent Features | |
6898 | @end ifset | |
2469cfa2 NC |
6899 | @ifset MSP430 |
6900 | * MSP430-Dependent:: MSP430 Dependent Features | |
6901 | @end ifset | |
252b5132 | 6902 | @ifset SH |
ef230218 JR |
6903 | * SH-Dependent:: Renesas / SuperH SH Dependent Features |
6904 | * SH64-Dependent:: SuperH SH64 Dependent Features | |
252b5132 | 6905 | @end ifset |
e135f41b NC |
6906 | @ifset PDP11 |
6907 | * PDP-11-Dependent:: PDP-11 Dependent Features | |
6908 | @end ifset | |
041dd5a9 ILT |
6909 | @ifset PJ |
6910 | * PJ-Dependent:: picoJava Dependent Features | |
6911 | @end ifset | |
418c1742 MG |
6912 | @ifset PPC |
6913 | * PPC-Dependent:: PowerPC Dependent Features | |
6914 | @end ifset | |
046d31c2 NC |
6915 | @ifset RX |
6916 | * RX-Dependent:: RX Dependent Features | |
6917 | @end ifset | |
11c19e16 MS |
6918 | @ifset S390 |
6919 | * S/390-Dependent:: IBM S/390 Dependent Features | |
6920 | @end ifset | |
c0157db4 NC |
6921 | @ifset SCORE |
6922 | * SCORE-Dependent:: SCORE Dependent Features | |
6923 | @end ifset | |
252b5132 RH |
6924 | @ifset SPARC |
6925 | * Sparc-Dependent:: SPARC Dependent Features | |
6926 | @end ifset | |
39bec121 TW |
6927 | @ifset TIC54X |
6928 | * TIC54X-Dependent:: TI TMS320C54x Dependent Features | |
6929 | @end ifset | |
40b36596 JM |
6930 | @ifset TIC6X |
6931 | * TIC6X-Dependent :: TI TMS320C6x Dependent Features | |
6932 | @end ifset | |
252b5132 RH |
6933 | @ifset V850 |
6934 | * V850-Dependent:: V850 Dependent Features | |
6935 | @end ifset | |
e0001a05 NC |
6936 | @ifset XTENSA |
6937 | * Xtensa-Dependent:: Xtensa Dependent Features | |
6938 | @end ifset | |
3c9b82ba NC |
6939 | @ifset Z80 |
6940 | * Z80-Dependent:: Z80 Dependent Features | |
6941 | @end ifset | |
252b5132 RH |
6942 | @ifset Z8000 |
6943 | * Z8000-Dependent:: Z8000 Dependent Features | |
6944 | @end ifset | |
6945 | @ifset VAX | |
6946 | * Vax-Dependent:: VAX Dependent Features | |
6947 | @end ifset | |
6948 | @end menu | |
6949 | ||
6950 | @lowersections | |
6951 | @end ifset | |
6952 | ||
6953 | @c The following major nodes are *sections* in the GENERIC version, *chapters* | |
6954 | @c in single-cpu versions. This is mainly achieved by @lowersections. There is a | |
6955 | @c peculiarity: to preserve cross-references, there must be a node called | |
6956 | @c "Machine Dependencies". Hence the conditional nodenames in each | |
6957 | @c major node below. Node defaulting in makeinfo requires adjacency of | |
6958 | @c node and sectioning commands; hence the repetition of @chapter BLAH | |
6959 | @c in both conditional blocks. | |
6960 | ||
625e1353 RH |
6961 | @ifset ALPHA |
6962 | @include c-alpha.texi | |
6963 | @end ifset | |
6964 | ||
6965 | @ifset ARC | |
6966 | @include c-arc.texi | |
6967 | @end ifset | |
6968 | ||
252b5132 RH |
6969 | @ifset ARM |
6970 | @include c-arm.texi | |
6971 | @end ifset | |
6972 | ||
8473f7a4 DC |
6973 | @ifset AVR |
6974 | @include c-avr.texi | |
6975 | @end ifset | |
6976 | ||
3b4e1885 | 6977 | @ifset Blackfin |
07c1b327 CM |
6978 | @include c-bfin.texi |
6979 | @end ifset | |
6980 | ||
3d3d428f NC |
6981 | @ifset CR16 |
6982 | @include c-cr16.texi | |
6983 | @end ifset | |
6984 | ||
328eb32e HPN |
6985 | @ifset CRIS |
6986 | @include c-cris.texi | |
6987 | @end ifset | |
6988 | ||
c2dcd04e | 6989 | @ifset Renesas-all |
252b5132 RH |
6990 | @ifclear GENERIC |
6991 | @node Machine Dependencies | |
6992 | @chapter Machine Dependent Features | |
6993 | ||
c2dcd04e | 6994 | The machine instruction sets are different on each Renesas chip family, |
252b5132 | 6995 | and there are also some syntax differences among the families. This |
a4fb0134 | 6996 | chapter describes the specific @command{@value{AS}} features for each |
252b5132 RH |
6997 | family. |
6998 | ||
6999 | @menu | |
c2dcd04e | 7000 | * H8/300-Dependent:: Renesas H8/300 Dependent Features |
c2dcd04e | 7001 | * SH-Dependent:: Renesas SH Dependent Features |
252b5132 RH |
7002 | @end menu |
7003 | @lowersections | |
7004 | @end ifclear | |
7005 | @end ifset | |
7006 | ||
7007 | @ifset D10V | |
7008 | @include c-d10v.texi | |
7009 | @end ifset | |
7010 | ||
7011 | @ifset D30V | |
7012 | @include c-d30v.texi | |
7013 | @end ifset | |
7014 | ||
7015 | @ifset H8/300 | |
7016 | @include c-h8300.texi | |
7017 | @end ifset | |
7018 | ||
252b5132 RH |
7019 | @ifset HPPA |
7020 | @include c-hppa.texi | |
7021 | @end ifset | |
7022 | ||
5b93d8bb AM |
7023 | @ifset I370 |
7024 | @include c-i370.texi | |
7025 | @end ifset | |
7026 | ||
252b5132 RH |
7027 | @ifset I80386 |
7028 | @include c-i386.texi | |
7029 | @end ifset | |
7030 | ||
e3308d0d JE |
7031 | @ifset I860 |
7032 | @include c-i860.texi | |
7033 | @end ifset | |
7034 | ||
252b5132 RH |
7035 | @ifset I960 |
7036 | @include c-i960.texi | |
7037 | @end ifset | |
7038 | ||
9e32ca89 NC |
7039 | @ifset IA64 |
7040 | @include c-ia64.texi | |
7041 | @end ifset | |
7042 | ||
a40cbfa3 NC |
7043 | @ifset IP2K |
7044 | @include c-ip2k.texi | |
7045 | @end ifset | |
7046 | ||
84e94c90 NC |
7047 | @ifset LM32 |
7048 | @include c-lm32.texi | |
7049 | @end ifset | |
7050 | ||
49f58d10 JB |
7051 | @ifset M32C |
7052 | @include c-m32c.texi | |
7053 | @end ifset | |
7054 | ||
ec694b89 NC |
7055 | @ifset M32R |
7056 | @include c-m32r.texi | |
7057 | @end ifset | |
252b5132 RH |
7058 | |
7059 | @ifset M680X0 | |
7060 | @include c-m68k.texi | |
7061 | @end ifset | |
7062 | ||
60bcf0fa NC |
7063 | @ifset M68HC11 |
7064 | @include c-m68hc11.texi | |
7065 | @end ifset | |
7066 | ||
01642c12 | 7067 | @ifset MICROBLAZE |
7ba29e2a NC |
7068 | @include c-microblaze.texi |
7069 | @end ifset | |
7070 | ||
252b5132 RH |
7071 | @ifset MIPS |
7072 | @include c-mips.texi | |
7073 | @end ifset | |
7074 | ||
3c3bdf30 NC |
7075 | @ifset MMIX |
7076 | @include c-mmix.texi | |
7077 | @end ifset | |
7078 | ||
2469cfa2 NC |
7079 | @ifset MSP430 |
7080 | @include c-msp430.texi | |
7081 | @end ifset | |
7082 | ||
252b5132 RH |
7083 | @ifset NS32K |
7084 | @include c-ns32k.texi | |
7085 | @end ifset | |
7086 | ||
e135f41b NC |
7087 | @ifset PDP11 |
7088 | @include c-pdp11.texi | |
7089 | @end ifset | |
7090 | ||
041dd5a9 ILT |
7091 | @ifset PJ |
7092 | @include c-pj.texi | |
7093 | @end ifset | |
7094 | ||
418c1742 MG |
7095 | @ifset PPC |
7096 | @include c-ppc.texi | |
7097 | @end ifset | |
7098 | ||
046d31c2 NC |
7099 | @ifset RX |
7100 | @include c-rx.texi | |
7101 | @end ifset | |
7102 | ||
11c19e16 MS |
7103 | @ifset S390 |
7104 | @include c-s390.texi | |
7105 | @end ifset | |
7106 | ||
c0157db4 NC |
7107 | @ifset SCORE |
7108 | @include c-score.texi | |
7109 | @end ifset | |
7110 | ||
252b5132 RH |
7111 | @ifset SH |
7112 | @include c-sh.texi | |
324bfcf3 | 7113 | @include c-sh64.texi |
252b5132 RH |
7114 | @end ifset |
7115 | ||
7116 | @ifset SPARC | |
7117 | @include c-sparc.texi | |
7118 | @end ifset | |
7119 | ||
39bec121 TW |
7120 | @ifset TIC54X |
7121 | @include c-tic54x.texi | |
7122 | @end ifset | |
7123 | ||
40b36596 JM |
7124 | @ifset TIC6X |
7125 | @include c-tic6x.texi | |
7126 | @end ifset | |
7127 | ||
3c9b82ba NC |
7128 | @ifset Z80 |
7129 | @include c-z80.texi | |
7130 | @end ifset | |
7131 | ||
252b5132 RH |
7132 | @ifset Z8000 |
7133 | @include c-z8k.texi | |
7134 | @end ifset | |
7135 | ||
7136 | @ifset VAX | |
7137 | @include c-vax.texi | |
7138 | @end ifset | |
7139 | ||
7140 | @ifset V850 | |
7141 | @include c-v850.texi | |
7142 | @end ifset | |
7143 | ||
e0001a05 NC |
7144 | @ifset XTENSA |
7145 | @include c-xtensa.texi | |
7146 | @end ifset | |
7147 | ||
252b5132 RH |
7148 | @ifset GENERIC |
7149 | @c reverse effect of @down at top of generic Machine-Dep chapter | |
7150 | @raisesections | |
7151 | @end ifset | |
7152 | ||
7153 | @node Reporting Bugs | |
7154 | @chapter Reporting Bugs | |
7155 | @cindex bugs in assembler | |
7156 | @cindex reporting bugs in assembler | |
7157 | ||
a4fb0134 | 7158 | Your bug reports play an essential role in making @command{@value{AS}} reliable. |
252b5132 RH |
7159 | |
7160 | Reporting a bug may help you by bringing a solution to your problem, or it may | |
7161 | not. But in any case the principal function of a bug report is to help the | |
a4fb0134 SC |
7162 | entire community by making the next version of @command{@value{AS}} work better. |
7163 | Bug reports are your contribution to the maintenance of @command{@value{AS}}. | |
252b5132 RH |
7164 | |
7165 | In order for a bug report to serve its purpose, you must include the | |
7166 | information that enables us to fix the bug. | |
7167 | ||
7168 | @menu | |
7169 | * Bug Criteria:: Have you found a bug? | |
7170 | * Bug Reporting:: How to report bugs | |
7171 | @end menu | |
7172 | ||
7173 | @node Bug Criteria | |
c1253627 | 7174 | @section Have You Found a Bug? |
252b5132 RH |
7175 | @cindex bug criteria |
7176 | ||
7177 | If you are not sure whether you have found a bug, here are some guidelines: | |
7178 | ||
7179 | @itemize @bullet | |
7180 | @cindex fatal signal | |
7181 | @cindex assembler crash | |
7182 | @cindex crash of assembler | |
7183 | @item | |
7184 | If the assembler gets a fatal signal, for any input whatever, that is a | |
a4fb0134 | 7185 | @command{@value{AS}} bug. Reliable assemblers never crash. |
252b5132 RH |
7186 | |
7187 | @cindex error on valid input | |
7188 | @item | |
a4fb0134 | 7189 | If @command{@value{AS}} produces an error message for valid input, that is a bug. |
252b5132 RH |
7190 | |
7191 | @cindex invalid input | |
7192 | @item | |
a4fb0134 | 7193 | If @command{@value{AS}} does not produce an error message for invalid input, that |
252b5132 RH |
7194 | is a bug. However, you should note that your idea of ``invalid input'' might |
7195 | be our idea of ``an extension'' or ``support for traditional practice''. | |
7196 | ||
7197 | @item | |
7198 | If you are an experienced user of assemblers, your suggestions for improvement | |
a4fb0134 | 7199 | of @command{@value{AS}} are welcome in any case. |
252b5132 RH |
7200 | @end itemize |
7201 | ||
7202 | @node Bug Reporting | |
c1253627 | 7203 | @section How to Report Bugs |
252b5132 RH |
7204 | @cindex bug reports |
7205 | @cindex assembler bugs, reporting | |
7206 | ||
7207 | A number of companies and individuals offer support for @sc{gnu} products. If | |
a4fb0134 | 7208 | you obtained @command{@value{AS}} from a support organization, we recommend you |
252b5132 RH |
7209 | contact that organization first. |
7210 | ||
7211 | You can find contact information for many support companies and | |
7212 | individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs | |
7213 | distribution. | |
7214 | ||
ad22bfe8 | 7215 | @ifset BUGURL |
a4fb0134 | 7216 | In any event, we also recommend that you send bug reports for @command{@value{AS}} |
ad22bfe8 JM |
7217 | to @value{BUGURL}. |
7218 | @end ifset | |
252b5132 RH |
7219 | |
7220 | The fundamental principle of reporting bugs usefully is this: | |
7221 | @strong{report all the facts}. If you are not sure whether to state a | |
7222 | fact or leave it out, state it! | |
7223 | ||
7224 | Often people omit facts because they think they know what causes the problem | |
7225 | and assume that some details do not matter. Thus, you might assume that the | |
7226 | name of a symbol you use in an example does not matter. Well, probably it does | |
7227 | not, but one cannot be sure. Perhaps the bug is a stray memory reference which | |
7228 | happens to fetch from the location where that name is stored in memory; | |
7229 | perhaps, if the name were different, the contents of that location would fool | |
7230 | the assembler into doing the right thing despite the bug. Play it safe and | |
7231 | give a specific, complete example. That is the easiest thing for you to do, | |
7232 | and the most helpful. | |
7233 | ||
7234 | Keep in mind that the purpose of a bug report is to enable us to fix the bug if | |
7235 | it is new to us. Therefore, always write your bug reports on the assumption | |
7236 | that the bug has not been reported previously. | |
7237 | ||
7238 | Sometimes people give a few sketchy facts and ask, ``Does this ring a | |
c1253627 NC |
7239 | bell?'' This cannot help us fix a bug, so it is basically useless. We |
7240 | respond by asking for enough details to enable us to investigate. | |
7241 | You might as well expedite matters by sending them to begin with. | |
252b5132 RH |
7242 | |
7243 | To enable us to fix the bug, you should include all these things: | |
7244 | ||
7245 | @itemize @bullet | |
7246 | @item | |
a4fb0134 | 7247 | The version of @command{@value{AS}}. @command{@value{AS}} announces it if you start |
252b5132 RH |
7248 | it with the @samp{--version} argument. |
7249 | ||
7250 | Without this, we will not know whether there is any point in looking for | |
a4fb0134 | 7251 | the bug in the current version of @command{@value{AS}}. |
252b5132 RH |
7252 | |
7253 | @item | |
a4fb0134 | 7254 | Any patches you may have applied to the @command{@value{AS}} source. |
252b5132 RH |
7255 | |
7256 | @item | |
7257 | The type of machine you are using, and the operating system name and | |
7258 | version number. | |
7259 | ||
7260 | @item | |
a4fb0134 | 7261 | What compiler (and its version) was used to compile @command{@value{AS}}---e.g. |
252b5132 RH |
7262 | ``@code{gcc-2.7}''. |
7263 | ||
7264 | @item | |
7265 | The command arguments you gave the assembler to assemble your example and | |
7266 | observe the bug. To guarantee you will not omit something important, list them | |
7267 | all. A copy of the Makefile (or the output from make) is sufficient. | |
7268 | ||
7269 | If we were to try to guess the arguments, we would probably guess wrong | |
7270 | and then we might not encounter the bug. | |
7271 | ||
7272 | @item | |
7273 | A complete input file that will reproduce the bug. If the bug is observed when | |
7274 | the assembler is invoked via a compiler, send the assembler source, not the | |
7275 | high level language source. Most compilers will produce the assembler source | |
7276 | when run with the @samp{-S} option. If you are using @code{@value{GCC}}, use | |
7277 | the options @samp{-v --save-temps}; this will save the assembler source in a | |
7278 | file with an extension of @file{.s}, and also show you exactly how | |
a4fb0134 | 7279 | @command{@value{AS}} is being run. |
252b5132 RH |
7280 | |
7281 | @item | |
7282 | A description of what behavior you observe that you believe is | |
7283 | incorrect. For example, ``It gets a fatal signal.'' | |
7284 | ||
a4fb0134 | 7285 | Of course, if the bug is that @command{@value{AS}} gets a fatal signal, then we |
252b5132 RH |
7286 | will certainly notice it. But if the bug is incorrect output, we might not |
7287 | notice unless it is glaringly wrong. You might as well not give us a chance to | |
7288 | make a mistake. | |
7289 | ||
7290 | Even if the problem you experience is a fatal signal, you should still say so | |
7291 | explicitly. Suppose something strange is going on, such as, your copy of | |
b45619c0 | 7292 | @command{@value{AS}} is out of sync, or you have encountered a bug in the C |
252b5132 RH |
7293 | library on your system. (This has happened!) Your copy might crash and ours |
7294 | would not. If you told us to expect a crash, then when ours fails to crash, we | |
7295 | would know that the bug was not happening for us. If you had not told us to | |
7296 | expect a crash, then we would not be able to draw any conclusion from our | |
7297 | observations. | |
7298 | ||
7299 | @item | |
a4fb0134 | 7300 | If you wish to suggest changes to the @command{@value{AS}} source, send us context |
252b5132 RH |
7301 | diffs, as generated by @code{diff} with the @samp{-u}, @samp{-c}, or @samp{-p} |
7302 | option. Always send diffs from the old file to the new file. If you even | |
a4fb0134 | 7303 | discuss something in the @command{@value{AS}} source, refer to it by context, not |
252b5132 RH |
7304 | by line number. |
7305 | ||
7306 | The line numbers in our development sources will not match those in your | |
7307 | sources. Your line numbers would convey no useful information to us. | |
7308 | @end itemize | |
7309 | ||
7310 | Here are some things that are not necessary: | |
7311 | ||
7312 | @itemize @bullet | |
7313 | @item | |
7314 | A description of the envelope of the bug. | |
7315 | ||
7316 | Often people who encounter a bug spend a lot of time investigating | |
7317 | which changes to the input file will make the bug go away and which | |
7318 | changes will not affect it. | |
7319 | ||
7320 | This is often time consuming and not very useful, because the way we | |
7321 | will find the bug is by running a single example under the debugger | |
7322 | with breakpoints, not by pure deduction from a series of examples. | |
7323 | We recommend that you save your time for something else. | |
7324 | ||
7325 | Of course, if you can find a simpler example to report @emph{instead} | |
7326 | of the original one, that is a convenience for us. Errors in the | |
7327 | output will be easier to spot, running under the debugger will take | |
7328 | less time, and so on. | |
7329 | ||
7330 | However, simplification is not vital; if you do not want to do this, | |
7331 | report the bug anyway and send us the entire test case you used. | |
7332 | ||
7333 | @item | |
7334 | A patch for the bug. | |
7335 | ||
7336 | A patch for the bug does help us if it is a good one. But do not omit | |
7337 | the necessary information, such as the test case, on the assumption that | |
7338 | a patch is all we need. We might see problems with your patch and decide | |
7339 | to fix the problem another way, or we might not understand it at all. | |
7340 | ||
a4fb0134 | 7341 | Sometimes with a program as complicated as @command{@value{AS}} it is very hard to |
252b5132 RH |
7342 | construct an example that will make the program follow a certain path through |
7343 | the code. If you do not send us the example, we will not be able to construct | |
7344 | one, so we will not be able to verify that the bug is fixed. | |
7345 | ||
7346 | And if we cannot understand what bug you are trying to fix, or why your | |
7347 | patch should be an improvement, we will not install it. A test case will | |
7348 | help us to understand. | |
7349 | ||
7350 | @item | |
7351 | A guess about what the bug is or what it depends on. | |
7352 | ||
7353 | Such guesses are usually wrong. Even we cannot guess right about such | |
7354 | things without first using the debugger to find the facts. | |
7355 | @end itemize | |
7356 | ||
7357 | @node Acknowledgements | |
7358 | @chapter Acknowledgements | |
7359 | ||
653cfe85 | 7360 | If you have contributed to GAS and your name isn't listed here, |
252b5132 | 7361 | it is not meant as a slight. We just don't know about it. Send mail to the |
01642c12 RM |
7362 | maintainer, and we'll correct the situation. Currently |
7363 | @c (January 1994), | |
252b5132 RH |
7364 | the maintainer is Ken Raeburn (email address @code{raeburn@@cygnus.com}). |
7365 | ||
7366 | Dean Elsner wrote the original @sc{gnu} assembler for the VAX.@footnote{Any | |
7367 | more details?} | |
7368 | ||
7369 | Jay Fenlason maintained GAS for a while, adding support for GDB-specific debug | |
7370 | information and the 68k series machines, most of the preprocessing pass, and | |
7371 | extensive changes in @file{messages.c}, @file{input-file.c}, @file{write.c}. | |
7372 | ||
7373 | K. Richard Pixley maintained GAS for a while, adding various enhancements and | |
7374 | many bug fixes, including merging support for several processors, breaking GAS | |
7375 | up to handle multiple object file format back ends (including heavy rewrite, | |
7376 | testing, an integration of the coff and b.out back ends), adding configuration | |
7377 | including heavy testing and verification of cross assemblers and file splits | |
7378 | and renaming, converted GAS to strictly ANSI C including full prototypes, added | |
7379 | support for m680[34]0 and cpu32, did considerable work on i960 including a COFF | |
7380 | port (including considerable amounts of reverse engineering), a SPARC opcode | |
7381 | file rewrite, DECstation, rs6000, and hp300hpux host ports, updated ``know'' | |
7382 | assertions and made them work, much other reorganization, cleanup, and lint. | |
7383 | ||
7384 | Ken Raeburn wrote the high-level BFD interface code to replace most of the code | |
7385 | in format-specific I/O modules. | |
7386 | ||
7387 | The original VMS support was contributed by David L. Kashtan. Eric Youngdale | |
7388 | has done much work with it since. | |
7389 | ||
7390 | The Intel 80386 machine description was written by Eliot Dresselhaus. | |
7391 | ||
7392 | Minh Tran-Le at IntelliCorp contributed some AIX 386 support. | |
7393 | ||
7394 | The Motorola 88k machine description was contributed by Devon Bowen of Buffalo | |
7395 | University and Torbjorn Granlund of the Swedish Institute of Computer Science. | |
7396 | ||
7397 | Keith Knowles at the Open Software Foundation wrote the original MIPS back end | |
7398 | (@file{tc-mips.c}, @file{tc-mips.h}), and contributed Rose format support | |
7399 | (which hasn't been merged in yet). Ralph Campbell worked with the MIPS code to | |
7400 | support a.out format. | |
7401 | ||
7be1c489 AM |
7402 | Support for the Zilog Z8k and Renesas H8/300 processors (tc-z8k, |
7403 | tc-h8300), and IEEE 695 object file format (obj-ieee), was written by | |
252b5132 RH |
7404 | Steve Chamberlain of Cygnus Support. Steve also modified the COFF back end to |
7405 | use BFD for some low-level operations, for use with the H8/300 and AMD 29k | |
7406 | targets. | |
7407 | ||
7408 | John Gilmore built the AMD 29000 support, added @code{.include} support, and | |
7409 | simplified the configuration of which versions accept which directives. He | |
7410 | updated the 68k machine description so that Motorola's opcodes always produced | |
c1253627 | 7411 | fixed-size instructions (e.g., @code{jsr}), while synthetic instructions |
252b5132 RH |
7412 | remained shrinkable (@code{jbsr}). John fixed many bugs, including true tested |
7413 | cross-compilation support, and one bug in relaxation that took a week and | |
7414 | required the proverbial one-bit fix. | |
7415 | ||
7416 | Ian Lance Taylor of Cygnus Support merged the Motorola and MIT syntax for the | |
7417 | 68k, completed support for some COFF targets (68k, i386 SVR3, and SCO Unix), | |
7418 | added support for MIPS ECOFF and ELF targets, wrote the initial RS/6000 and | |
7419 | PowerPC assembler, and made a few other minor patches. | |
7420 | ||
653cfe85 | 7421 | Steve Chamberlain made GAS able to generate listings. |
252b5132 RH |
7422 | |
7423 | Hewlett-Packard contributed support for the HP9000/300. | |
7424 | ||
7425 | Jeff Law wrote GAS and BFD support for the native HPPA object format (SOM) | |
7426 | along with a fairly extensive HPPA testsuite (for both SOM and ELF object | |
7427 | formats). This work was supported by both the Center for Software Science at | |
7428 | the University of Utah and Cygnus Support. | |
7429 | ||
7430 | Support for ELF format files has been worked on by Mark Eichin of Cygnus | |
7431 | Support (original, incomplete implementation for SPARC), Pete Hoogenboom and | |
7432 | Jeff Law at the University of Utah (HPPA mainly), Michael Meissner of the Open | |
7433 | Software Foundation (i386 mainly), and Ken Raeburn of Cygnus Support (sparc, | |
7434 | and some initial 64-bit support). | |
7435 | ||
c1253627 | 7436 | Linas Vepstas added GAS support for the ESA/390 ``IBM 370'' architecture. |
5b93d8bb | 7437 | |
252b5132 RH |
7438 | Richard Henderson rewrote the Alpha assembler. Klaus Kaempf wrote GAS and BFD |
7439 | support for openVMS/Alpha. | |
7440 | ||
39bec121 TW |
7441 | Timothy Wall, Michael Hayes, and Greg Smart contributed to the various tic* |
7442 | flavors. | |
7443 | ||
e0001a05 | 7444 | David Heine, Sterling Augustine, Bob Wilson and John Ruttenberg from Tensilica, |
b45619c0 | 7445 | Inc.@: added support for Xtensa processors. |
e0001a05 | 7446 | |
252b5132 RH |
7447 | Several engineers at Cygnus Support have also provided many small bug fixes and |
7448 | configuration enhancements. | |
7449 | ||
84e94c90 NC |
7450 | Jon Beniston added support for the Lattice Mico32 architecture. |
7451 | ||
252b5132 RH |
7452 | Many others have contributed large or small bugfixes and enhancements. If |
7453 | you have contributed significant work and are not mentioned on this list, and | |
7454 | want to be, let us know. Some of the history has been lost; we are not | |
7455 | intentionally leaving anyone out. | |
7456 | ||
793c5807 NC |
7457 | @node GNU Free Documentation License |
7458 | @appendix GNU Free Documentation License | |
c1253627 | 7459 | @include fdl.texi |
cf055d54 | 7460 | |
370b66a1 CD |
7461 | @node AS Index |
7462 | @unnumbered AS Index | |
252b5132 RH |
7463 | |
7464 | @printindex cp | |
7465 | ||
252b5132 RH |
7466 | @bye |
7467 | @c Local Variables: | |
7468 | @c fill-column: 79 | |
7469 | @c End: |