* doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
[deliverable/binutils-gdb.git] / gas / doc / c-h8300.texi
CommitLineData
2da5c037
AM
1@c Copyright (C) 1991, 1992, 1993, 1994, 1995, 2003
2@c Free Software Foundation, Inc.
252b5132
RH
3@c This is part of the GAS manual.
4@c For copying conditions, see the file as.texinfo.
5@ifset GENERIC
6@page
7@end ifset
8@node H8/300-Dependent
9@chapter H8/300 Dependent Features
10
11@cindex H8/300 support
12@menu
13* H8/300 Options:: Options
14* H8/300 Syntax:: Syntax
15* H8/300 Floating Point:: Floating Point
16* H8/300 Directives:: H8/300 Machine Directives
17* H8/300 Opcodes:: Opcodes
18@end menu
19
20@node H8/300 Options
21@section Options
22
23@cindex H8/300 options (none)
24@cindex options, H8/300 (none)
c2dcd04e
NC
25@code{@value{AS}} has no additional command-line options for the
26Renesas (formerly Hitachi) H8/300 family.
252b5132
RH
27
28@node H8/300 Syntax
29@section Syntax
30@menu
31* H8/300-Chars:: Special Characters
32* H8/300-Regs:: Register Names
33* H8/300-Addressing:: Addressing Modes
34@end menu
35
36@node H8/300-Chars
37@subsection Special Characters
38
39@cindex line comment character, H8/300
40@cindex H8/300 line comment character
41@samp{;} is the line comment character.
42
43@cindex line separator, H8/300
44@cindex statement separator, H8/300
45@cindex H8/300 line separator
46@samp{$} can be used instead of a newline to separate statements.
47Therefore @emph{you may not use @samp{$} in symbol names} on the H8/300.
48
49@node H8/300-Regs
50@subsection Register Names
51
52@cindex H8/300 registers
53@cindex register names, H8/300
54You can use predefined symbols of the form @samp{r@var{n}h} and
55@samp{r@var{n}l} to refer to the H8/300 registers as sixteen 8-bit
56general-purpose registers. @var{n} is a digit from @samp{0} to
57@samp{7}); for instance, both @samp{r0h} and @samp{r7l} are valid
58register names.
59
60You can also use the eight predefined symbols @samp{r@var{n}} to refer
61to the H8/300 registers as 16-bit registers (you must use this form for
62addressing).
63
64On the H8/300H, you can also use the eight predefined symbols
65@samp{er@var{n}} (@samp{er0} @dots{} @samp{er7}) to refer to the 32-bit
66general purpose registers.
67
68The two control registers are called @code{pc} (program counter; a
6916-bit register, except on the H8/300H where it is 24 bits) and
70@code{ccr} (condition code register; an 8-bit register). @code{r7} is
71used as the stack pointer, and can also be called @code{sp}.
72
73@node H8/300-Addressing
74@subsection Addressing Modes
75
76@cindex addressing modes, H8/300
77@cindex H8/300 addressing modes
78@value{AS} understands the following addressing modes for the H8/300:
79@table @code
80@item r@var{n}
81Register direct
82
83@item @@r@var{n}
84Register indirect
85
86@need 1200
87@item @@(@var{d}, r@var{n})
88@itemx @@(@var{d}:16, r@var{n})
89@itemx @@(@var{d}:24, r@var{n})
90Register indirect: 16-bit or 24-bit displacement @var{d} from register
91@var{n}. (24-bit displacements are only meaningful on the H8/300H.)
92
93@item @@r@var{n}+
94Register indirect with post-increment
95
96@item @@-r@var{n}
97Register indirect with pre-decrement
98
99@item @code{@@}@var{aa}
100@itemx @code{@@}@var{aa}:8
101@itemx @code{@@}@var{aa}:16
102@itemx @code{@@}@var{aa}:24
103Absolute address @code{aa}. (The address size @samp{:24} only makes
104sense on the H8/300H.)
105
106@item #@var{xx}
107@itemx #@var{xx}:8
108@itemx #@var{xx}:16
109@itemx #@var{xx}:32
110Immediate data @var{xx}. You may specify the @samp{:8}, @samp{:16}, or
111@samp{:32} for clarity, if you wish; but @code{@value{AS}} neither
112requires this nor uses it---the data size required is taken from
113context.
114
115@item @code{@@}@code{@@}@var{aa}
116@itemx @code{@@}@code{@@}@var{aa}:8
117Memory indirect. You may specify the @samp{:8} for clarity, if you
118wish; but @code{@value{AS}} neither requires this nor uses it.
119@end table
120
121@node H8/300 Floating Point
122@section Floating Point
123
124@cindex floating point, H8/300 (@sc{ieee})
125@cindex H8/300 floating point (@sc{ieee})
126The H8/300 family has no hardware floating point, but the @code{.float}
127directive generates @sc{ieee} floating-point numbers for compatibility
128with other development tools.
129
130@page
131@node H8/300 Directives
132@section H8/300 Machine Directives
133
134@cindex H8/300 machine directives (none)
135@cindex machine directives, H8/300 (none)
136@cindex @code{word} directive, H8/300
137@cindex @code{int} directive, H8/300
8d9cd6b1
NC
138@code{@value{AS}} has the following machine-dependent directives for
139the H8/300:
252b5132
RH
140
141@table @code
142@cindex H8/300H, assembling for
143@item .h8300h
144Recognize and emit additional instructions for the H8/300H variant, and
145also make @code{.int} emit 32-bit numbers rather than the usual (16-bit)
146for the H8/300 family.
8d9cd6b1
NC
147
148@item .h8300s
149Recognize and emit additional instructions for the H8S variant, and
150also make @code{.int} emit 32-bit numbers rather than the usual (16-bit)
151for the H8/300 family.
152
153@item .h8300hn
154Recognize and emit additional instructions for the H8/300H variant in
155normal mode, and also make @code{.int} emit 32-bit numbers rather than
156the usual (16-bit) for the H8/300 family.
157
158@item .h8300sn
159Recognize and emit additional instructions for the H8S variant in
160normal mode, and also make @code{.int} emit 32-bit numbers rather than
161the usual (16-bit) for the H8/300 family.
252b5132
RH
162@end table
163
164On the H8/300 family (including the H8/300H) @samp{.word} directives
165generate 16-bit numbers.
166
167@node H8/300 Opcodes
168@section Opcodes
169
170@cindex H8/300 opcode summary
171@cindex opcode summary, H8/300
172@cindex mnemonics, H8/300
173@cindex instruction summary, H8/300
174For detailed information on the H8/300 machine instruction set, see
c2dcd04e
NC
175@cite{H8/300 Series Programming Manual}. For information specific to
176the H8/300H, see @cite{H8/300H Series Programming Manual} (Renesas).
252b5132
RH
177
178@code{@value{AS}} implements all the standard H8/300 opcodes. No additional
179pseudo-instructions are needed on this family.
180
181@ifset SMALL
182@c this table, due to the multi-col faking and hardcoded order, looks silly
183@c except in smallbook. See comments below "@set SMALL" near top of this file.
184
185The following table summarizes the H8/300 opcodes, and their arguments.
186Entries marked @samp{*} are opcodes used only on the H8/300H.
187
188@smallexample
189@c Using @group seems to use the normal baselineskip, not the smallexample
190@c baselineskip; looks approx doublespaced.
191 @i{Legend:}
192 Rs @r{source register}
193 Rd @r{destination register}
194 abs @r{absolute address}
195 imm @r{immediate data}
196 disp:N @r{N-bit displacement from a register}
197 pcrel:N @r{N-bit displacement relative to program counter}
198
199 add.b #imm,rd * andc #imm,ccr
200 add.b rs,rd band #imm,rd
201 add.w rs,rd band #imm,@@rd
202* add.w #imm,rd band #imm,@@abs:8
203* add.l rs,rd bra pcrel:8
204* add.l #imm,rd * bra pcrel:16
205 adds #imm,rd bt pcrel:8
206 addx #imm,rd * bt pcrel:16
207 addx rs,rd brn pcrel:8
208 and.b #imm,rd * brn pcrel:16
209 and.b rs,rd bf pcrel:8
210* and.w rs,rd * bf pcrel:16
211* and.w #imm,rd bhi pcrel:8
212* and.l #imm,rd * bhi pcrel:16
213* and.l rs,rd bls pcrel:8
214@page
215* bls pcrel:16 bld #imm,rd
216 bcc pcrel:8 bld #imm,@@rd
217* bcc pcrel:16 bld #imm,@@abs:8
218 bhs pcrel:8 bnot #imm,rd
219* bhs pcrel:16 bnot #imm,@@rd
220 bcs pcrel:8 bnot #imm,@@abs:8
221* bcs pcrel:16 bnot rs,rd
222 blo pcrel:8 bnot rs,@@rd
223* blo pcrel:16 bnot rs,@@abs:8
224 bne pcrel:8 bor #imm,rd
225* bne pcrel:16 bor #imm,@@rd
226 beq pcrel:8 bor #imm,@@abs:8
227* beq pcrel:16 bset #imm,rd
228 bvc pcrel:8 bset #imm,@@rd
229* bvc pcrel:16 bset #imm,@@abs:8
230 bvs pcrel:8 bset rs,rd
231* bvs pcrel:16 bset rs,@@rd
232 bpl pcrel:8 bset rs,@@abs:8
233* bpl pcrel:16 bsr pcrel:8
234 bmi pcrel:8 bsr pcrel:16
235* bmi pcrel:16 bst #imm,rd
236 bge pcrel:8 bst #imm,@@rd
237* bge pcrel:16 bst #imm,@@abs:8
238 blt pcrel:8 btst #imm,rd
239* blt pcrel:16 btst #imm,@@rd
240 bgt pcrel:8 btst #imm,@@abs:8
241* bgt pcrel:16 btst rs,rd
242 ble pcrel:8 btst rs,@@rd
243* ble pcrel:16 btst rs,@@abs:8
244 bclr #imm,rd bxor #imm,rd
245 bclr #imm,@@rd bxor #imm,@@rd
246 bclr #imm,@@abs:8 bxor #imm,@@abs:8
247 bclr rs,rd cmp.b #imm,rd
248 bclr rs,@@rd cmp.b rs,rd
249 bclr rs,@@abs:8 cmp.w rs,rd
250 biand #imm,rd cmp.w rs,rd
251 biand #imm,@@rd * cmp.w #imm,rd
252 biand #imm,@@abs:8 * cmp.l #imm,rd
253 bild #imm,rd * cmp.l rs,rd
254 bild #imm,@@rd daa rs
255 bild #imm,@@abs:8 das rs
256 bior #imm,rd dec.b rs
257 bior #imm,@@rd * dec.w #imm,rd
258 bior #imm,@@abs:8 * dec.l #imm,rd
259 bist #imm,rd divxu.b rs,rd
260 bist #imm,@@rd * divxu.w rs,rd
261 bist #imm,@@abs:8 * divxs.b rs,rd
262 bixor #imm,rd * divxs.w rs,rd
263 bixor #imm,@@rd eepmov
264 bixor #imm,@@abs:8 * eepmovw
265@page
266* exts.w rd mov.w rs,@@abs:16
267* exts.l rd * mov.l #imm,rd
268* extu.w rd * mov.l rs,rd
269* extu.l rd * mov.l @@rs,rd
270 inc rs * mov.l @@(disp:16,rs),rd
271* inc.w #imm,rd * mov.l @@(disp:24,rs),rd
272* inc.l #imm,rd * mov.l @@rs+,rd
273 jmp @@rs * mov.l @@abs:16,rd
274 jmp abs * mov.l @@abs:24,rd
275 jmp @@@@abs:8 * mov.l rs,@@rd
276 jsr @@rs * mov.l rs,@@(disp:16,rd)
277 jsr abs * mov.l rs,@@(disp:24,rd)
278 jsr @@@@abs:8 * mov.l rs,@@-rd
279 ldc #imm,ccr * mov.l rs,@@abs:16
280 ldc rs,ccr * mov.l rs,@@abs:24
281* ldc @@abs:16,ccr movfpe @@abs:16,rd
282* ldc @@abs:24,ccr movtpe rs,@@abs:16
283* ldc @@(disp:16,rs),ccr mulxu.b rs,rd
284* ldc @@(disp:24,rs),ccr * mulxu.w rs,rd
285* ldc @@rs+,ccr * mulxs.b rs,rd
286* ldc @@rs,ccr * mulxs.w rs,rd
287* mov.b @@(disp:24,rs),rd neg.b rs
288* mov.b rs,@@(disp:24,rd) * neg.w rs
289 mov.b @@abs:16,rd * neg.l rs
290 mov.b rs,rd nop
291 mov.b @@abs:8,rd not.b rs
292 mov.b rs,@@abs:8 * not.w rs
293 mov.b rs,rd * not.l rs
294 mov.b #imm,rd or.b #imm,rd
295 mov.b @@rs,rd or.b rs,rd
296 mov.b @@(disp:16,rs),rd * or.w #imm,rd
297 mov.b @@rs+,rd * or.w rs,rd
298 mov.b @@abs:8,rd * or.l #imm,rd
299 mov.b rs,@@rd * or.l rs,rd
300 mov.b rs,@@(disp:16,rd) orc #imm,ccr
301 mov.b rs,@@-rd pop.w rs
302 mov.b rs,@@abs:8 * pop.l rs
303 mov.w rs,@@rd push.w rs
304* mov.w @@(disp:24,rs),rd * push.l rs
305* mov.w rs,@@(disp:24,rd) rotl.b rs
306* mov.w @@abs:24,rd * rotl.w rs
307* mov.w rs,@@abs:24 * rotl.l rs
308 mov.w rs,rd rotr.b rs
309 mov.w #imm,rd * rotr.w rs
310 mov.w @@rs,rd * rotr.l rs
311 mov.w @@(disp:16,rs),rd rotxl.b rs
312 mov.w @@rs+,rd * rotxl.w rs
313 mov.w @@abs:16,rd * rotxl.l rs
314 mov.w rs,@@(disp:16,rd) rotxr.b rs
315 mov.w rs,@@-rd * rotxr.w rs
316@page
317* rotxr.l rs * stc ccr,@@(disp:24,rd)
318 bpt * stc ccr,@@-rd
319 rte * stc ccr,@@abs:16
320 rts * stc ccr,@@abs:24
321 shal.b rs sub.b rs,rd
322* shal.w rs sub.w rs,rd
323* shal.l rs * sub.w #imm,rd
324 shar.b rs * sub.l rs,rd
325* shar.w rs * sub.l #imm,rd
326* shar.l rs subs #imm,rd
327 shll.b rs subx #imm,rd
328* shll.w rs subx rs,rd
329* shll.l rs * trapa #imm
330 shlr.b rs xor #imm,rd
331* shlr.w rs xor rs,rd
332* shlr.l rs * xor.w #imm,rd
333 sleep * xor.w rs,rd
334 stc ccr,rd * xor.l #imm,rd
335* stc ccr,@@rs * xor.l rs,rd
336* stc ccr,@@(disp:16,rd) xorc #imm,ccr
337@end smallexample
338@end ifset
339
340@cindex size suffixes, H8/300
341@cindex H8/300 size suffixes
342Four H8/300 instructions (@code{add}, @code{cmp}, @code{mov},
343@code{sub}) are defined with variants using the suffixes @samp{.b},
344@samp{.w}, and @samp{.l} to specify the size of a memory operand.
345@code{@value{AS}} supports these suffixes, but does not require them;
346since one of the operands is always a register, @code{@value{AS}} can
347deduce the correct size.
348
349For example, since @code{r0} refers to a 16-bit register,
350@example
351mov r0,@@foo
352@exdent is equivalent to
353mov.w r0,@@foo
354@end example
355
356If you use the size suffixes, @code{@value{AS}} issues a warning when
357the suffix and the register size do not match.
This page took 0.334766 seconds and 4 git commands to generate.