[deliverable/binutils-gdb.git] / gas / doc / c-sh.texi

@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 2001, 2004
@c Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@page
@node SH-Dependent
@chapter Renesas / SuperH SH Dependent Features

@cindex SH support
@menu
* SH Options::              Options
* SH Syntax::               Syntax
* SH Floating Point::       Floating Point
* SH Directives::           SH Machine Directives
* SH Opcodes::              Opcodes
@end menu

@node SH Options
@section Options

@cindex SH options
@cindex options, SH
@code{@value{AS}} has following command-line options for the Renesas
(formerly Hitachi) / SuperH SH family.

@table @code
@kindex -little
@kindex -big
@kindex -relax
@kindex -small
@kindex -dsp
@kindex -renesas

@item -little
Generate little endian code.

@item -big
Generate big endian code.

@item -relax
Alter jump instructions for long displacements.

@item -small
Align sections to 4 byte boundaries, not 16.

@item -dsp
Enable sh-dsp insns, and disable sh3e / sh4 insns.

@item -renesas
Disable optimization with section symbol for compatibility with
Renesas assembler.

@item -isa=sh4 | sh4a
Specify the sh4 or sh4a instruction set.
@item -isa=dsp
Enable sh-dsp insns, and disable sh3e / sh4 insns.
@item -isa=fp
Enable sh2e, sh3e, sh4, and sh4a insn sets.
@item -isa=all
Enable sh1, sh2, sh2e, sh3, sh3e, sh4, sh4a, and sh-dsp insn sets.

@end table

@node SH Syntax
@section Syntax

@menu
* SH-Chars::                Special Characters
* SH-Regs::                 Register Names
* SH-Addressing::           Addressing Modes
@end menu

@node SH-Chars
@subsection Special Characters

@cindex line comment character, SH
@cindex SH line comment character
@samp{!} is the line comment character.

@cindex line separator, SH
@cindex statement separator, SH
@cindex SH line separator
You can use @samp{;} instead of a newline to separate statements.

@cindex symbol names, @samp{$} in
@cindex @code{$} in symbol names
Since @samp{$} has no special meaning, you may use it in symbol names.

@node SH-Regs
@subsection Register Names

@cindex SH registers
@cindex registers, SH
You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2},
@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, @samp{r7}, @samp{r8},
@samp{r9}, @samp{r10}, @samp{r11}, @samp{r12}, @samp{r13}, @samp{r14},
and @samp{r15} to refer to the SH registers.

The SH also has these control registers:

@table @code
@item pr
procedure register (holds return address)

@item pc
program counter

@item mach
@itemx macl
high and low multiply accumulator registers

@item sr
status register

@item gbr
global base register

@item vbr
vector base register (for interrupt vectors)
@end table

@node SH-Addressing
@subsection Addressing Modes

@cindex addressing modes, SH
@cindex SH addressing modes
@code{@value{AS}} understands the following addressing modes for the SH.
@code{R@var{n}} in the following refers to any of the numbered
registers, but @emph{not} the control registers.

@table @code
@item R@var{n}
Register direct

@item @@R@var{n}
Register indirect

@item @@-R@var{n}
Register indirect with pre-decrement

@item @@R@var{n}+
Register indirect with post-increment

@item @@(@var{disp}, R@var{n})
Register indirect with displacement

@item @@(R0, R@var{n})
Register indexed

@item @@(@var{disp}, GBR)
@code{GBR} offset

@item @@(R0, GBR)
GBR indexed

@item @var{addr}
@itemx @@(@var{disp}, PC)
PC relative address (for branch or for addressing memory).  The
@code{@value{AS}} implementation allows you to use the simpler form
@var{addr} anywhere a PC relative address is called for; the alternate
form is supported for compatibility with other assemblers.

@item #@var{imm}
Immediate data
@end table

@node SH Floating Point
@section Floating Point

@cindex floating point, SH (@sc{ieee})
@cindex SH floating point (@sc{ieee})
SH2E, SH3E and SH4 groups have on-chip floating-point unit (FPU). Other
SH groups can use @code{.float} directive to generate @sc{ieee} 
floating-point numbers. 

SH2E and SH3E support single-precision floating point calculations as 
well as entirely PCAPI compatible emulation of double-precision 
floating point calculations. SH2E and SH3E instructions are a subset of
the floating point calculations conforming to the IEEE754 standard.

In addition to single-precision and double-precision floating-point 
operation capability, the on-chip FPU of SH4 has a 128-bit graphic 
engine that enables 32-bit floating-point data to be processed 128 
bits at a time. It also supports 4 * 4 array operations and inner 
product operations. Also, a superscalar architecture is employed that 
enables simultaneous execution of two instructions (including FPU 
instructions), providing performance of up to twice that of 
conventional architectures at the same frequency.

@node SH Directives
@section SH Machine Directives

@cindex SH machine directives
@cindex machine directives, SH
@cindex @code{uaword} directive, SH
@cindex @code{ualong} directive, SH

@table @code
@item uaword
@itemx ualong
@code{@value{AS}} will issue a warning when a misaligned @code{.word} or
@code{.long} directive is used.  You may use @code{.uaword} or
@code{.ualong} to indicate that the value is intentionally misaligned.
@end table

@node SH Opcodes
@section Opcodes

@cindex SH opcode summary
@cindex opcode summary, SH
@cindex mnemonics, SH
@cindex instruction summary, SH
For detailed information on the SH machine instruction set, see
@cite{SH-Microcomputer User's Manual} (Renesas) or
@cite{SH-4 32-bit CPU Core Architecture} (SuperH) and
@cite{SuperH (SH) 64-Bit RISC Series} (SuperH).

@code{@value{AS}} implements all the standard SH opcodes.  No additional
pseudo-instructions are needed on this family.  Note, however, that
because @code{@value{AS}} supports a simpler form of PC-relative
addressing, you may simply write (for example)

@example
mov.l  bar,r0
@end example

@noindent
where other assemblers might require an explicit displacement to
@code{bar} from the program counter:

@example
mov.l  @@(@var{disp}, PC)
@end example

@ifset SMALL
@c this table, due to the multi-col faking and hardcoded order, looks silly
@c except in smallbook.  See comments below "@set SMALL" near top of this file.

Here is a summary of SH opcodes:

@page
@smallexample
@i{Legend:}
Rn        @r{a numbered register}
Rm        @r{another numbered register}
#imm      @r{immediate data}
disp      @r{displacement}
disp8     @r{8-bit displacement}
disp12    @r{12-bit displacement}

add #imm,Rn                    lds.l @@Rn+,PR              
add Rm,Rn                      mac.w @@Rm+,@@Rn+           
addc Rm,Rn                     mov #imm,Rn                 
addv Rm,Rn                     mov Rm,Rn                   
and #imm,R0                    mov.b Rm,@@(R0,Rn)          
and Rm,Rn                      mov.b Rm,@@-Rn              
and.b #imm,@@(R0,GBR)           mov.b Rm,@@Rn               
bf disp8                       mov.b @@(disp,Rm),R0        
bra disp12                     mov.b @@(disp,GBR),R0       
bsr disp12                     mov.b @@(R0,Rm),Rn          
bt disp8                       mov.b @@Rm+,Rn              
clrmac                         mov.b @@Rm,Rn               
clrt                           mov.b R0,@@(disp,Rm)        
cmp/eq #imm,R0                 mov.b R0,@@(disp,GBR)       
cmp/eq Rm,Rn                   mov.l Rm,@@(disp,Rn)        
cmp/ge Rm,Rn                   mov.l Rm,@@(R0,Rn)          
cmp/gt Rm,Rn                   mov.l Rm,@@-Rn              
cmp/hi Rm,Rn                   mov.l Rm,@@Rn               
cmp/hs Rm,Rn                   mov.l @@(disp,Rn),Rm        
cmp/pl Rn                      mov.l @@(disp,GBR),R0       
cmp/pz Rn                      mov.l @@(disp,PC),Rn        
cmp/str Rm,Rn                  mov.l @@(R0,Rm),Rn          
div0s Rm,Rn                    mov.l @@Rm+,Rn              
div0u                          mov.l @@Rm,Rn               
div1 Rm,Rn                     mov.l R0,@@(disp,GBR)       
exts.b Rm,Rn                   mov.w Rm,@@(R0,Rn)          
exts.w Rm,Rn                   mov.w Rm,@@-Rn              
extu.b Rm,Rn                   mov.w Rm,@@Rn               
extu.w Rm,Rn                   mov.w @@(disp,Rm),R0        
jmp @@Rn                        mov.w @@(disp,GBR),R0       
jsr @@Rn                        mov.w @@(disp,PC),Rn        
ldc Rn,GBR                     mov.w @@(R0,Rm),Rn          
ldc Rn,SR                      mov.w @@Rm+,Rn              
ldc Rn,VBR                     mov.w @@Rm,Rn               
ldc.l @@Rn+,GBR                 mov.w R0,@@(disp,Rm)        
ldc.l @@Rn+,SR                  mov.w R0,@@(disp,GBR)       
ldc.l @@Rn+,VBR                 mova @@(disp,PC),R0         
lds Rn,MACH                    movt Rn                     
lds Rn,MACL                    muls Rm,Rn                  
lds Rn,PR                      mulu Rm,Rn                  
lds.l @@Rn+,MACH                neg Rm,Rn                   
lds.l @@Rn+,MACL                negc Rm,Rn                  
@page
nop                            stc VBR,Rn                
not Rm,Rn                      stc.l GBR,@@-Rn           
or #imm,R0                     stc.l SR,@@-Rn            
or Rm,Rn                       stc.l VBR,@@-Rn           
or.b #imm,@@(R0,GBR)            sts MACH,Rn               
rotcl Rn                       sts MACL,Rn               
rotcr Rn                       sts PR,Rn                 
rotl Rn                        sts.l MACH,@@-Rn          
rotr Rn                        sts.l MACL,@@-Rn          
rte                            sts.l PR,@@-Rn            
rts                            sub Rm,Rn                 
sett                           subc Rm,Rn                
shal Rn                        subv Rm,Rn                
shar Rn                        swap.b Rm,Rn              
shll Rn                        swap.w Rm,Rn              
shll16 Rn                      tas.b @@Rn                
shll2 Rn                       trapa #imm                
shll8 Rn                       tst #imm,R0               
shlr Rn                        tst Rm,Rn                 
shlr16 Rn                      tst.b #imm,@@(R0,GBR)     
shlr2 Rn                       xor #imm,R0               
shlr8 Rn                       xor Rm,Rn                 
sleep                          xor.b #imm,@@(R0,GBR)     
stc GBR,Rn                     xtrct Rm,Rn               
stc SR,Rn
@end smallexample
@end ifset

@ifset Renesas-all
@ifclear GENERIC
@raisesections
@end ifclear
@end ifset
Commit	Line	Data
303e7b79	1	@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 2001, 2004
f7e42eb4	2	@c Free Software Foundation, Inc.
252b5132 RH	3	@c This is part of the GAS manual.
	4	@c For copying conditions, see the file as.texinfo.
	5	@page
	6	@node SH-Dependent
ef230218	7	@chapter Renesas / SuperH SH Dependent Features
252b5132 RH	8
	9	@cindex SH support
	10	@menu
	11	* SH Options:: Options
	12	* SH Syntax:: Syntax
	13	* SH Floating Point:: Floating Point
	14	* SH Directives:: SH Machine Directives
	15	* SH Opcodes:: Opcodes
	16	@end menu
	17
	18	@node SH Options
	19	@section Options
	20
7649aa50 NC	21	@cindex SH options
7649aa50 NC	22	@cindex options, SH
c2dcd04e	23	@code{@value{AS}} has following command-line options for the Renesas
ef230218	24	(formerly Hitachi) / SuperH SH family.
252b5132	25
7649aa50 NC	26	@table @code
	27	@kindex -little
	28	@kindex -big
	29	@kindex -relax
	30	@kindex -small
	31	@kindex -dsp
f55629b8	32	@kindex -renesas
7649aa50 NC	33
	34	@item -little
	35	Generate little endian code.
	36
	37	@item -big
	38	Generate big endian code.
	39
	40	@item -relax
	41	Alter jump instructions for long displacements.
	42
	43	@item -small
	44	Align sections to 4 byte boundaries, not 16.
	45
	46	@item -dsp
	47	Enable sh-dsp insns, and disable sh3e / sh4 insns.
	48
f55629b8 KK	49	@item -renesas
	50	Disable optimization with section symbol for compatibility with
	51	Renesas assembler.
	52
88da98f3 MS	53	@item -isa=sh4 \| sh4a
	54	Specify the sh4 or sh4a instruction set.
	55	@item -isa=dsp
	56	Enable sh-dsp insns, and disable sh3e / sh4 insns.
	57	@item -isa=fp
	58	Enable sh2e, sh3e, sh4, and sh4a insn sets.
	59	@item -isa=all
	60	Enable sh1, sh2, sh2e, sh3, sh3e, sh4, sh4a, and sh-dsp insn sets.
	61
7649aa50 NC	62	@end table
7649aa50 NC	63
252b5132 RH	64	@node SH Syntax
	65	@section Syntax
	66
	67	@menu
	68	* SH-Chars:: Special Characters
	69	* SH-Regs:: Register Names
	70	* SH-Addressing:: Addressing Modes
	71	@end menu
	72
	73	@node SH-Chars
	74	@subsection Special Characters
	75
	76	@cindex line comment character, SH
	77	@cindex SH line comment character
	78	@samp{!} is the line comment character.
	79
	80	@cindex line separator, SH
	81	@cindex statement separator, SH
	82	@cindex SH line separator
	83	You can use @samp{;} instead of a newline to separate statements.
	84
	85	@cindex symbol names, @samp{$} in
	86	@cindex @code{$} in symbol names
	87	Since @samp{$} has no special meaning, you may use it in symbol names.
	88
	89	@node SH-Regs
	90	@subsection Register Names
	91
	92	@cindex SH registers
	93	@cindex registers, SH
	94	You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2},
	95	@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, @samp{r7}, @samp{r8},
	96	@samp{r9}, @samp{r10}, @samp{r11}, @samp{r12}, @samp{r13}, @samp{r14},
	97	and @samp{r15} to refer to the SH registers.
	98
	99	The SH also has these control registers:
	100
	101	@table @code
	102	@item pr
	103	procedure register (holds return address)
	104
	105	@item pc
	106	program counter
	107
	108	@item mach
	109	@itemx macl
	110	high and low multiply accumulator registers
	111
	112	@item sr
	113	status register
	114
	115	@item gbr
	116	global base register
	117
	118	@item vbr
	119	vector base register (for interrupt vectors)
	120	@end table
	121
	122	@node SH-Addressing
	123	@subsection Addressing Modes
	124
	125	@cindex addressing modes, SH
	126	@cindex SH addressing modes
	127	@code{@value{AS}} understands the following addressing modes for the SH.
128	@code{R@var{n}} in the following refers to any of the numbered
129	registers, but @emph{not} the control registers.
130
131	@table @code
132	@item R@var{n}
133	Register direct
134
135	@item @@R@var{n}
136	Register indirect
137
138	@item @@-R@var{n}
139	Register indirect with pre-decrement
140
141	@item @@R@var{n}+
142	Register indirect with post-increment
143
144	@item @@(@var{disp}, R@var{n})
145	Register indirect with displacement
146
147	@item @@(R0, R@var{n})
148	Register indexed
149
150	@item @@(@var{disp}, GBR)
151	@code{GBR} offset
152
153	@item @@(R0, GBR)
154	GBR indexed
155
156	@item @var{addr}
157	@itemx @@(@var{disp}, PC)
158	PC relative address (for branch or for addressing memory). The
159	@code{@value{AS}} implementation allows you to use the simpler form
160	@var{addr} anywhere a PC relative address is called for; the alternate
161	form is supported for compatibility with other assemblers.
162
163	@item #@var{imm}
164	Immediate data
165	@end table
166
167	@node SH Floating Point
168	@section Floating Point
169
170	@cindex floating point, SH (@sc{ieee})
171	@cindex SH floating point (@sc{ieee})
303e7b79 NC	172	SH2E, SH3E and SH4 groups have on-chip floating-point unit (FPU). Other
	173	SH groups can use @code{.float} directive to generate @sc{ieee}
	174	floating-point numbers.
	175
	176	SH2E and SH3E support single-precision floating point calculations as
	177	well as entirely PCAPI compatible emulation of double-precision
	178	floating point calculations. SH2E and SH3E instructions are a subset of
	179	the floating point calculations conforming to the IEEE754 standard.
	180
	181	In addition to single-precision and double-precision floating-point
	182	operation capability, the on-chip FPU of SH4 has a 128-bit graphic
	183	engine that enables 32-bit floating-point data to be processed 128
	184	bits at a time. It also supports 4 * 4 array operations and inner
	185	product operations. Also, a superscalar architecture is employed that
	186	enables simultaneous execution of two instructions (including FPU
	187	instructions), providing performance of up to twice that of
	188	conventional architectures at the same frequency.
252b5132 RH	189
	190	@node SH Directives
	191	@section SH Machine Directives
	192
	193	@cindex SH machine directives
	194	@cindex machine directives, SH
	195	@cindex @code{uaword} directive, SH
	196	@cindex @code{ualong} directive, SH
	197
	198	@table @code
	199	@item uaword
	200	@itemx ualong
	201	@code{@value{AS}} will issue a warning when a misaligned @code{.word} or
	202	@code{.long} directive is used. You may use @code{.uaword} or
	203	@code{.ualong} to indicate that the value is intentionally misaligned.
	204	@end table
	205
	206	@node SH Opcodes
	207	@section Opcodes
	208
	209	@cindex SH opcode summary
	210	@cindex opcode summary, SH
	211	@cindex mnemonics, SH
	212	@cindex instruction summary, SH
	213	For detailed information on the SH machine instruction set, see
ef230218 JR	214	@cite{SH-Microcomputer User's Manual} (Renesas) or
	215	@cite{SH-4 32-bit CPU Core Architecture} (SuperH) and
	216	@cite{SuperH (SH) 64-Bit RISC Series} (SuperH).
252b5132 RH	217
	218	@code{@value{AS}} implements all the standard SH opcodes. No additional
	219	pseudo-instructions are needed on this family. Note, however, that
	220	because @code{@value{AS}} supports a simpler form of PC-relative
	221	addressing, you may simply write (for example)
	222
	223	@example
	224	mov.l bar,r0
	225	@end example
	226
	227	@noindent
	228	where other assemblers might require an explicit displacement to
	229	@code{bar} from the program counter:
	230
	231	@example
	232	mov.l @@(@var{disp}, PC)
	233	@end example
	234
	235	@ifset SMALL
	236	@c this table, due to the multi-col faking and hardcoded order, looks silly
	237	@c except in smallbook. See comments below "@set SMALL" near top of this file.
	238
	239	Here is a summary of SH opcodes:
	240
	241	@page
	242	@smallexample
	243	@i{Legend:}
	244	Rn @r{a numbered register}
	245	Rm @r{another numbered register}
	246	#imm @r{immediate data}
	247	disp @r{displacement}
	248	disp8 @r{8-bit displacement}
	249	disp12 @r{12-bit displacement}
	250
	251	add #imm,Rn lds.l @@Rn+,PR
	252	add Rm,Rn mac.w @@Rm+,@@Rn+
	253	addc Rm,Rn mov #imm,Rn
	254	addv Rm,Rn mov Rm,Rn
	255	and #imm,R0 mov.b Rm,@@(R0,Rn)
	256	and Rm,Rn mov.b Rm,@@-Rn
	257	and.b #imm,@@(R0,GBR) mov.b Rm,@@Rn
	258	bf disp8 mov.b @@(disp,Rm),R0
	259	bra disp12 mov.b @@(disp,GBR),R0
	260	bsr disp12 mov.b @@(R0,Rm),Rn
	261	bt disp8 mov.b @@Rm+,Rn
	262	clrmac mov.b @@Rm,Rn
	263	clrt mov.b R0,@@(disp,Rm)
	264	cmp/eq #imm,R0 mov.b R0,@@(disp,GBR)
	265	cmp/eq Rm,Rn mov.l Rm,@@(disp,Rn)
	266	cmp/ge Rm,Rn mov.l Rm,@@(R0,Rn)
	267	cmp/gt Rm,Rn mov.l Rm,@@-Rn
	268	cmp/hi Rm,Rn mov.l Rm,@@Rn
	269	cmp/hs Rm,Rn mov.l @@(disp,Rn),Rm
	270	cmp/pl Rn mov.l @@(disp,GBR),R0
	271	cmp/pz Rn mov.l @@(disp,PC),Rn
	272	cmp/str Rm,Rn mov.l @@(R0,Rm),Rn
	273	div0s Rm,Rn mov.l @@Rm+,Rn
	274	div0u mov.l @@Rm,Rn
	275	div1 Rm,Rn mov.l R0,@@(disp,GBR)
	276	exts.b Rm,Rn mov.w Rm,@@(R0,Rn)
	277	exts.w Rm,Rn mov.w Rm,@@-Rn
	278	extu.b Rm,Rn mov.w Rm,@@Rn
	279	extu.w Rm,Rn mov.w @@(disp,Rm),R0
	280	jmp @@Rn mov.w @@(disp,GBR),R0
281	jsr @@Rn mov.w @@(disp,PC),Rn
282	ldc Rn,GBR mov.w @@(R0,Rm),Rn
283	ldc Rn,SR mov.w @@Rm+,Rn
284	ldc Rn,VBR mov.w @@Rm,Rn
285	ldc.l @@Rn+,GBR mov.w R0,@@(disp,Rm)
286	ldc.l @@Rn+,SR mov.w R0,@@(disp,GBR)
287	ldc.l @@Rn+,VBR mova @@(disp,PC),R0
288	lds Rn,MACH movt Rn
289	lds Rn,MACL muls Rm,Rn
290	lds Rn,PR mulu Rm,Rn
291	lds.l @@Rn+,MACH neg Rm,Rn
292	lds.l @@Rn+,MACL negc Rm,Rn
293	@page
294	nop stc VBR,Rn
295	not Rm,Rn stc.l GBR,@@-Rn
296	or #imm,R0 stc.l SR,@@-Rn
297	or Rm,Rn stc.l VBR,@@-Rn
298	or.b #imm,@@(R0,GBR) sts MACH,Rn
299	rotcl Rn sts MACL,Rn
300	rotcr Rn sts PR,Rn
301	rotl Rn sts.l MACH,@@-Rn
302	rotr Rn sts.l MACL,@@-Rn
303	rte sts.l PR,@@-Rn
304	rts sub Rm,Rn
305	sett subc Rm,Rn
306	shal Rn subv Rm,Rn
307	shar Rn swap.b Rm,Rn
308	shll Rn swap.w Rm,Rn
309	shll16 Rn tas.b @@Rn
310	shll2 Rn trapa #imm
311	shll8 Rn tst #imm,R0
312	shlr Rn tst Rm,Rn
313	shlr16 Rn tst.b #imm,@@(R0,GBR)
314	shlr2 Rn xor #imm,R0
315	shlr8 Rn xor Rm,Rn
316	sleep xor.b #imm,@@(R0,GBR)
317	stc GBR,Rn xtrct Rm,Rn
318	stc SR,Rn
319	@end smallexample
320	@end ifset
321
c2dcd04e	322	@ifset Renesas-all
252b5132 RH	323	@ifclear GENERIC
	324	@raisesections
	325	@end ifclear
	326	@end ifset
	327