wait_for_inferior and errors thrown from target_wait

[deliverable/binutils-gdb.git] / gdb / ChangeLog

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (wait_for_inferior): Install the
	finish_thread_state_cleanup cleanup across the whole function, not
	just around handle_inferior_event.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (resume) <step past permanent breakpoint>: Use
	do_target_resume.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait): Always call set_running.

2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>

	* MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".

2015-04-01  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (record_thread): Readd the thread to gdb's
	list if it was marked exited.

2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Oleg Nesterov  <oleg@redhat.com>

	PR corefiles/16092
	* linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
	New enum identifying the various options of the coredump_filter
	file.
	(struct smaps_vmflags): New struct.
	(use_coredump_filter): New variable.
	(decode_vmflags): New function.
	(mapping_is_anonymous_p): Likewise.
	(dump_mapping_p): Likewise.
	(linux_find_memory_regions_full): New variables
	'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
	Removed variable 'modified'.  Read /proc/<PID>/smaps file; improve
	parsing of its information.  Implement memory mapping filtering
	based on its contents.
	(show_use_coredump_filter): New function.
	(_initialize_linux_tdep): New command 'set use-coredump-filter'.
	* NEWS: Mention the possibility of using the
	'/proc/PID/coredump_filter' file when generating a corefile.
	Mention new command 'set use-coredump-filter'.

2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>

	* solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
	read_memory_unsigned_integer.

2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in (ZLIB): New.
	(ZLIBINC): Likewise.
	(INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
	(CLIBS): Add $(ZLIB).
	* acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
	Add -lz to LIBS.
	* gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
	* top.c (print_gdb_configuration): Remove --with-zlib and
	--without-zlib.
	* config.in: Regenerated.
	* configure: Likewise.

2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* NEWS: Mention info os cpus support.
	* gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
	(struct osdata_type): Add cpus entry, reorder the entries in
	alphabetical order.

2015-03-31  Matthias Klose  <doko@ubuntu.com>

	* compile/compile.c (compile_to_object): Allow triplets with or
	without vendor set.

2015-03-30  Doug Evans  <dje@google.com>

	PR c++/18141
	* cp-namespace.c (cp_search_static_and_baseclasses): Always look for
	klass in VAR_DOMAIN.

2015-03-30  Gary Benson <gbenson@redhat.com>

	* remote.c (remote_mourn_1): Remove function.  Update all callers
	to use remote_mourn.
	(extended_remote_mourn_1): Remove function.  Update all callers
	to use extended_remote_mourn.
	(extended_remote_attach_1): Remove function.  Update all callers
	to use extended_remote_attach.

2015-03-28  James Bowman  <james.bowman@ftdichip.com>

	* Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
	(HFILES_NO_SRCDIR): Add ft32-tdep.h.
	(ALLDEPFILES): Add ft32-tdep.c.
	* configure.tgt: Add FT32 entry.
	* ft32-tdep.c: New file, FT32 target-dependent code.
	* ft32-tdep.h: New file, FT32 target-dependent code.

2015-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert:
	2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
	Code cleanup.
	* printcmd.c (print_command_1): Move expr variable scope.

2015-03-27  Joel Brobecker  <brobecker@adacore.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.

2015-03-27  Andrzej Kaczmarek  <andrzej.kaczmarek@tieto.com>

	* gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
	sections.

2015-03-26  Joel Brobecker  <brobecker@adacore.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Contain any
	exception raised while parsing the probe arguments.
	Force parsing to be done using the C language parser.
	* expression.h (parse_expression_with_language): Declare.
	* parse.c (parse_expression_with_language): New function.

2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>

	* MAINTAINERS (Write After Approval): Add "Jon Turney".

2015-03-26  Andy Wingo  <wingo@igalia.com>

	PR symtab/18148
	* dwarf2read.c (struct partial_die_info): Add has_const_value
	member.
	(add_partial_symbol): Don't punt on symbols that have const_value
	attributes.
	(read_partial_die): Detect DW_AT_const_value.

2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Code cleanup.
	* printcmd.c (print_command_1): Move expr variable scope.

2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Code cleanup.
	* printcmd.c (validate_format): Make the parameter cmdname const.

2015-03-26  Don Breazeal  <donb@codesourcery.com>

	* remote.c (_initialize_remote): Update comment.

2015-03-26  Pedro Alves  <palves@redhat.com>
	    Jon TURNEY  <jon.turney@dronecode.org.uk>

	* coffread.c (coff_symfile_read): When constructing the name of an
	import stub symbol from import symbol for amd64, only skip the
	char after _imp_ if the target is underscored (like i386) and the
	char is indeed the target's leading char.

2015-03-25  Pedro Alves  <palves@redhat.com>

	* target.h <to_async>: Replace 'callback' and 'context' parameters
	with boolean 'enable' parameter.
	(target_async): Replace CALLBACK and CONTEXT parameters with
	boolean ENABLE parameter.
	* inf-loop.c (inferior_event_handler): Adjust.
	* linux-nat.c (linux_nat_attach, linux_nat_resume)
	(linux_nat_resume): Adjust.
	(async_client_callback, async_client_context): Delete.
	(handle_target_event): Call inferior_event_handler directly.
	(linux_nat_async): Replace 'callback' and 'context' parameters
	with boolean 'enable' parameter.  Adjust.  Remove references to
	async_client_callback and async_client_context.
	(linux_nat_close): Adjust.
	* record-btrace.c (record_btrace_async): Replace 'callback' and
	'context' parameters with boolean 'enable' parameter.  Adjust.
	(record_btrace_resume): Adjust.
	* record-full.c (record_full_async): Replace 'callback' and
	'context' parameters with boolean 'enable' parameter.  Adjust.
	(record_full_resume, record_full_core_resume): Adjust.
	* remote.c (struct remote_state) <async_client_callback,
	async_client_context>: Delete fields.
	(remote_start_remote, extended_remote_attach_1, remote_resume)
	(extended_remote_create_inferior): Adjust.
	(remote_async_serial_handler): Call inferior_event_handler
	directly.
	(remote_async): Replace 'callback' and 'context' parameters with
	boolean 'enable' parameter.  Adjust.
	* top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
	Adjust.
	* target-delegates.c: Regenerate.

2015-03-25  Gary Benson <gbenson@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* target.c (fileio_ft_t): New typedef, define object vector.
	(fileio_fhandles): New static variable.
	(is_closed_fileio_fh): New macro.
	(lowest_closed_fd): New static variable.
	(acquire_fileio_fd): New function.
	(release_fileio_fd): Likewise.
	(fileio_fd_to_fh): New macro.
	(target_fileio_open): Wrap the file descriptor on success.
	(target_fileio_pwrite): Updated to use wrapped file descriptor.
	(target_fileio_pread): Likewise.
	(target_fileio_close): Likewise.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* thread.c (thread_apply_all_command): Take exited threads into
	account.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (resume, proceed): Mention
	switch_back_to_stepped_thread, not switch_back_to_stepping.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (user_visible_resume_ptid): Rewrite going from
	most-locked to unlocked instead of the opposite.  Move comment ...
	* infrun.h (user_visible_resume_ptid): ... here.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_nat_resume): Output debug logs before trying
	to resume the event lwp.  Use the lwp's ptid instead of the passed
	in (maybe wildcard) ptid.
	(stop_wait_callback): Tweak debug log output.
	(check_stopped_by_breakpoint): Tweak debug log output.  Also dump
	TRAP_TRACE.
	(linux_nat_filter_event): In debug output, distinguish a
	resume_stop SIGSTOP from a delayed SIGSTOP.  Output debug logs
	before trying to resume the lwp.

2015-03-24  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
	pointer indirection.
	* gdbtypes.c (get_dyn_prop): Adjust, following change above.
	(add_dyn_prop, copy_dynamic_prop_list): Likewise.

2015-03-24  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
	Renames DYN_ATTR_DATA_LOCATION.
	(TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
	DYN_ATTR_DATA_LOCATION.
	* dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
	instead of DYN_ATTR_DATA_LOCATION.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (until_break_command): Adjust call to proceed.
	* gdbthread.h (struct thread_control_state) <stepping_command>:
	New field.
	* infcall.c (run_inferior_call): Adjust call to proceed.
	* infcmd.c (run_command_1, proceed_thread_callback, continue_1):
	Adjust calls to proceed.
	(set_step_frame): Set the current thread's step_start_function
	here.
	(step_once): Adjust calls to proceed.
	(jump_command, signal_command, until_next_command)
	(finish_backward, finish_forward, proceed_after_attach_callback)
	(attach_command_post_wait): Adjust calls to proceed.
	* infrun.c (proceed_after_vfork_done): Adjust call to proceed.
	(do_target_resume): New function, factored out from ...
	(resume): ... here.  Remove 'step' parameter.  Instead, check
	currently_stepping to determine whether the thread should be
	single-stepped.
	(proceed): Remove 'step' parameter and don't set the thread's
	step_start_function here.  Adjust call to 'resume'.
	(handle_inferior_event): Adjust calls to 'resume'.
	(switch_back_to_stepped_thread): Use do_target_resume instead of
	'resume'.
	(keep_going): Adjust calls to 'resume'.
	* infrun.h (proceed): Remove 'step' parameter.
	(resume): Likewise.
	* windows-nat.c (do_initial_windows_stuff): Adjust call to
	'resume'.
	* mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* gdbthread.h (struct thread_control_state) <stepping_command>:
	New field.
	* infcmd.c (step_once): Pass step=1 to clear_proceed_status.  Set
	the thread's stepping_command field.
	* infrun.c (resume): Check the thread's stepping_command flag to
	determine which threads should be resumed.  Rename 'entry_step'
	local to user_step.
	(clear_proceed_status_thread): Clear 'stepping_command'.
	(schedlock_applies): Change parameter type to struct thread_info
	pointer.  Adjust.
	(find_thread_needs_step_over): Remove 'step' parameter.  Adjust.
	(switch_back_to_stepped_thread): Adjust calls to
	'schedlock_applies'.
	(_initialize_infrun): Adjust "set scheduler-locking step" help.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (step_start_function): Delete and ...
	* gdbthread.h (struct thread_control_state) <step_start_function>:
	... now a field here.
	* infrun.c (clear_proceed_status_thread): Clear the thread's
	step_start_function.
	(proceed, process_event_stop_test, print_stop_event): Adjust.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (proceed): No longer handle negative step.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux.h (x86_linux_new_thread): New declaration.
	(x86_linux_prepare_to_resume): Likewise.
	* x86-linux-nat.c (x86_linux_new_thread):
	Moved to nat/x86-linux.c.
	(x86_linux_prepare_to_resume): Likewise.
	* nat/x86-linux.c (x86_linux_new_thread): New function.
	(x86_linux_prepare_to_resume): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux-dregs.h: New file.
	* nat/x86-linux-dregs.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
	(x86-linux-dregs.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux-dregs.h.
	(u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
	(x86_linux_dr_get): Likewise.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_update_debug_registers): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_update_debug_registers):
	New function, factored out from...
	(x86_linux_prepare_to_resume): ...this.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_dr_get): Update comments.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_prepare_to_resume): Likewise.
	(x86_linux_new_thread): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
	(x86_linux_new_thread): Rename argument.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux.h: New file.
	* nat/x86-linux.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
	(x86-linux.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
	(lwp_set_arch_private_info): New declaration.
	(lwp_arch_private_info): Likewise.
	* linux-nat.c (lwp_set_arch_private_info): New function.
	(lwp_arch_private_info): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux.h.
	(arch_lwp_info): Removed structure.
	(update_debug_registers_callback):
	Use lwp_set_debug_registers_changed.
	(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
	and lwp_set_debug_registers_changed.
	(x86_linux_new_thread): Use lwp_set_debug_registers_changed.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/linux-nat.h (ptid_of_lwp): New declaration.
	(lwp_is_stopped): Likewise.
	(lwp_stop_reason): Likewise.
	* linux-nat.c (ptid_of_lwp): New function.
	(lwp_is_stopped): Likewise.
	(lwp_is_stopped_by_watchpoint): Likewise.
	* x86-linux-nat.c (update_debug_registers_callback):
	Use lwp_is_stopped.
	(x86_linux_prepare_to_resume): Use ptid_of_lwp and
	lwp_stop_reason.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* linux-nat.h (linux_stop_lwp): Move declaration to...
	* nat/linux-nat.h (linux_stop_lwp): New declaration.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* linux-nat.h: Include nat/linux-nat.h.
	(iterate_over_lwps): Move declaration to nat/linux-nat.h.
	* nat/linux-nat.h (struct lwp_info): New forward declaration.
	(iterate_over_lwps_ftype): New typedef.
	(iterate_over_lwps): New declaration.
	* linux-nat.h (iterate_over_lwps): Update comment.  Use
	iterate_over_lwps_ftype.  Update callback return value check.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-nat.h (x86_debug_reg_state): Move declaration to...
	* nat/x86-dregs.h (x86_debug_reg_state): New declaration.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/linux-nat.h (current_lwp_ptid): New declaration.
	* linux-nat.c (current_lwp_ptid): New function.
	* x86-linux-nat.c: Include nat/linux-nat.h.
	(x86_linux_dr_get_addr): Use current_lwp_ptid.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.

2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	PR breakpoints/16466
	* breakpoint.c (create_breakpoint): Set thread on breakpoint struct.

2015-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ser-mingw.c (ser_windows_setparity): Fix indentation.
	* ser-unix.c (hardwire_setparity): Likewise.

2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>

	* NEWS: Mention set/show serial parity command.
	* monitor.c (monitor_open): Call serial_setparity.
	* remote.c (remote_open_1): Likewise.
	* ser-base.c (ser_base_serparity): New function.
	* ser-base.h (ser_base_setparity): Add  declaration.
	* ser-go32.c (dos_ops): Set "setparity" field.
	* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
	state.Parity.
	(ser_windows_setparity): New function.
	(hardwire_ops): Add ser_windows_setparity.
	(tty_ops): Add NULL for setparity field.
	(pipe_ops): Add ser_base_setparity.
	(tcp_ops): Likewise.
	* ser-pipe.c (pipe_ops): Likewise.
	* ser-tcp.c (tcp_ops): Likewise.
	* ser-unix.c (hardwire_setparity): Add declaration.
	(hardwire_raw): Don't reset PARENB flag.
	(hardwire_setparity): New function.
	(hardwire_ops): Add hardwire_setparity.
	* serial.c (serial_setparity): New function.
	(serial_parity): New global.
	(parity_none, parity_odd, parity_even, parity_enums, parity):
	New static globals.
	(set_parity): New function.
	(_initialize_serial): Add set/show serial parity commands.
	* serial.h (GDBPARITY_NONE): Define.
	(GDBPARITY_ODD): Define.
	(GDBPARITY_EVEN): Define.
	(serial_setparity) Add declaration.
	(struct serial_ops): Add setparity field.
	* target.h (serial_parity): Add declaration.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	* linespec.c (linespec_lexer_lex_keyword): Update comment.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	* breakpoint.c (parse_breakpoint_sals): Use
	linespec_lexer_lex_keyword to ascertain if the user specified
	a NULL location.
	* linespec.c [IF_KEYWORD_INDEX]: Define.
	(linespec_lexer_lex_keyword): Export.
	(struct ls_parser) <keyword_ok>: Remove.
	A keyword is only a keyword if not followed by another keyword.
	(linespec_lexer_lex_one): Remove keyword_ok handling.
	Add comment explaining why the parsing stream is not advanced
	when a keyword is seen.
	(parse_linespec): Remove parser->keyword_ok.
	* linespec.h (linespec_lexer_lex_keyword): Add declaration.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	PR gdb/18021
	* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
	if we find a static method with DW_AT_vtable_elem_location.

2015-03-21  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
	before the second loop, to avoid undefined behavior.  Reported by
	Anton Blanchard <anton@samba.org>.

2015-03-20  Keven Boell  <keven.boell@intel.com>

	* gdbtypes.c (resolve_dynamic_type_internal): Adapt
	data_location usage to linked list.
	(resolve_dynamic_type_internal): Adapt data_location to
	linked list.
	(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
	(copy_type_recursive, copy_type): Add copy of linked list.
	* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
	(struct dynamic_prop_list): New struct.
	* dwarf2read.c (set_die_type): Set data_location data.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
	inner block and make it const.
	* machoread.c (get_archive_prefix_len): Make "lparen" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
	* breakpoint.h (set_breakpoint_condition): Update declaration.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* tui/tui-io.c (tui_expand_tabs): Make "s1" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* remote-m32r-sdi.c (m32r_open): Make "port_str" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
	(nto_init_solib_absolute_prefix): Likewise.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
	* spu-tdep.c (spu_gdbarch_init): Make "name" const.

2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* config/djgpp/README: Remove gdb.hp.

2015-03-20  Yao Qi  <yao.qi@linaro.org>

	* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
	set_gdbarch_cannot_step_breakpoint.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_resume_one_lwp): Rename to ...
	(linux_resume_one_lwp_throw): ... this.  Don't handle ESRCH here,
	instead call perror_with_name.
	(check_ptrace_stopped_lwp_gone): New function.
	(linux_resume_one_lwp): Reimplement as wrapper around
	linux_resume_one_lwp_throw that swallows errors if the LWP is
	gone.
	(resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
	swallows errors if the LWP is gone.  Use
	linux_resume_one_lwp_throw instead of linux_resume_one_lwp.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (status_callback): Return early if the LWP has no
	status pending.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (select_event_lwp_callback): Update comment to no
	longer mention SIGTRAP.

2015-03-18  Tristan Gingold  <gingold@adacore.com>

        * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
        redirection code to ...
        (amd64_windows_frame_decode_insns): ... Here.  Fix in prologue
        checks.  Fix SAVE_NONVOL operations.  Add debug code and comments.

2015-03-18  Gary Benson <gbenson@redhat.com>

	(remote_protocol_features): Remove the "vFile:fstat" feature.
	(remote_hostio_fstat): Probe for "vFile:fstat" support.

2015-03-11  Yao Qi  <yao.qi@linaro.org>

	PR tdep/18107
	* aarch64-linux-tdep.c: Include xml-syscall.h
	(aarch64_linux_get_syscall_number): New function.
	(aarch64_linux_init_abi): Call
	set_gdbarch_get_syscall_number.
	* syscalls/aarch64-linux.xml: New file.

2015-03-17  Yurij Grechishhev  <yurij.grechishhev@gmail.com>

	* ser-base.h (ser_base_setstopbits): Change second argument name
	from "rate" to "num".

2015-03-17  Gary Benson <gbenson@redhat.com>
	    Luke Allardyce <lukeallardyce@gmail.com>

	PR gdb/18131
	* common/common-remote-fileio.h (sys/stat.h): New include.
	(stuct stat): Remove forward declaration.

2015-03-16  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
	before writing core register notes.

2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* gdb_curses.h (tgetnum): Mark with EXTERN_C.
	* stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
	(tgoto): Wrap with extern "C".

2015-03-16  Pedro Alves  <palves@redhat.com>
	    Yuanhui Zhang  <asmwarrior@gmail.com>

	* stub-termcap.c (tputs): Change prototype.

2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* windows-nat.c (struct thread_info_struct): Rename to ...
	(struct windows_thread_info_struct): ... this.
	(thread_info): Rename to ...
	(windows_thread_info): ... this.
	All users updated.

2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* NEWS: New Removed targets and native configurations.

2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove HPUX.
	* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
	(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
	(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
	ia64-hpux-tdep.h, solib-ia64-hpux.h.
	(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
	ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
	* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
	hppa-hpux-tdep.c.
	* config/ia64/hpux.mh: Remove file.
	* config/pa/hpux.mh: Remove file.
	* configure: Rebuilt.
	* configure.ac (dlgetmodinfo, somread.o): Remove.
	* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	(ia64-*-hpux*): Remove its float format exception.
	* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	* hppa-hpux-nat.c: Remove file.
	* hppa-hpux-tdep.c: Remove file.
	* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them here from hppa-tdep.h
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
	(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
	* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them to hppa-tdep.c.
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
	declarations.
	* ia64-hpux-nat.c: Remove file.
	* ia64-hpux-tdep.c: Remove file.
	* ia64-hpux-tdep.h: Remove file.
	* inf-ttrace.c: Remove file.
	* inf-ttrace.h: Remove file.
	* solib-ia64-hpux.c: Remove file.
	* solib-ia64-hpux.h: Remove file.
	* solib-pa64.c: Remove file.
	* solib-pa64.h: Remove file.
	* solib-som.c: Remove file.
	* solib-som.h: Remove file.
	* somread.c: Remove file.

2015-03-13  John Baldwin  <jhb@FreeBSD.org>

	* configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
	* config.in: Regenerate.
	* configure: Regenerate.
	* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
        define.
	(fbsd_find_memory_regions): Use kinfo_getvmmap to
	enumerate memory regions if present.

2015-03-13  John Baldwin  <jhb@FreeBSD.org>

	* amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
	* i386fbsd-tdep.c: Fix style in various gdb_static_assert
	expressions.
	(i386fbsd_sigtramp_p): Likewise.

2015-03-12  John Baldwin  <jhb@FreeBSD.org>

	* MAINTAINERS (Write After Approval): Add John Baldwin.

2015-03-12  Gary Benson <gbenson@redhat.com>

	* solib.c (_initialize_solib): Make "set/show sysroot" use
	add_setshow_optional_filename_cmd so it can be restored to
	empty after being set.

2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (SFILES): New source break-catch-syscall.c.
	(COMMON_OBS): New object break-catch-syscall.o.
	* break-catch-syscall.c: New file.
	* breakpoint.c: Remove inclusion of "xml-syscall.h".
	(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
	(struct syscall_catchpoint): Likewise.
	(dtor_catch_syscall): Likewise.
	(catch_syscall_inferior_data): Likewise.
	(struct catch_syscall_inferior_data): Likewise.
	(get_catch_syscall_inferior_data): Likewise.
	(catch_syscall_inferior_data_cleanup): Likewise.
	(insert_catch_syscall): Likewise.
	(remove_catch_syscall): Likewise.
	(breakpoint_hit_catch_syscall): Likewise.
	(print_it_catch_syscall): Likewise.
	(print_one_catch_syscall): Likewise.
	(print_mention_catch_syscall): Likewise.
	(print_recreate_catch_syscall): Likewise.
	(catch_syscall_breakpoint_ops): Likewise.
	(syscall_catchpoint_p): Likewise.
	(create_syscall_event_catchpoint): Likewise.
	(catch_syscall_split_args): Likewise.
	(catch_syscall_command_1): Likewise.
	(is_syscall_catchpoint_enabled): Likewise.
	(catch_syscall_enabled): Likewise.
	(catching_syscall_number): Likewise.
	(catch_syscall_completer): Likewise.
	(clear_syscall_counts): Likewise.
	(initialize_breakpoint_ops): Move initialization of syscall
	catchpoints to break-catch-syscall.c.
	(_initialize_breakpoint): Move code related to syscall catchpoints
	to break-catch-syscall.c.

2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>

	* breakpoint.c (breakpoint_find_if): New function.
	* breakpoint.h (breakpoint_find_if): New prototype.

2015-03-11  Gary Benson <gbenson@redhat.com>

	* remote-fileio.h (remote_fileio_to_host_stat): New declaration.
	* remote-fileio.c (remote_fileio_to_host_uint): New function.
	(remote_fileio_to_host_ulong): Likewise.
	(remote_fileio_to_host_mode): Likewise.
	(remote_fileio_to_host_time): Likewise.
	(remote_fileio_to_host_stat): Likewise.
	* remote.c (PACKET_vFile_fstat): New enum value.
	(remote_protocol_features): Register the "vFile:fstat" feature.
	(remote_hostio_fstat): New function.
	(remote_bfd_iovec_stat): Use the above.
	(_initialize_remote): Register new "set/show remote
	hostio-fstat-packet" command.
	* symfile.c (separate_debug_file_exists): Update comment.
	* NEWS: Announce new vFile:fstat packet.

2015-03-11  Gary Benson <gbenson@redhat.com>

	* common/common-remote-fileio.h: New file.
	* common/common-remote-fileio.c: Likewise.
	* Makefile.in (SFILES): Add common/common-remote-fileio.c.
	(HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
	(COMMON_OBS): Add common-remote-fileio.o.
	(common-remote-fileio.o): New rule.
	* remote-fileio.h (common-remote-fileio.h): New include.
	* remote-fileio.c (gdb/fileio.h): Do not include.
	(remote_fileio_to_be): Moved to common-remote-fileio.h.
	(remote_fileio_to_fio_uint): Likewise.
	(remote_fileio_to_fio_time): Likewise.
	(remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
	(remote_fileio_to_fio_mode): Likewise.
	(remote_fileio_to_fio_ulong): Likewise.
	(remote_fileio_to_fio_stat): Likewise.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
	we were checking the cached type, not the cached dynamic type.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
	other strings, as these are on the GC'd heap, and will be
	collected along with the smob.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
	(objfile_functions): Bind gdbscm_objfile_progspace to
	objfile-progspace.
	* guile/lib/gdb.scm: Add objfile-progspace to exports.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/guile.c (_initialize_guile): Disable automatic
	finalization, if Guile offers us that possibility.
	* guile/guile.c (call_initialize_gdb_module):
	* guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
	finalizers in appropriate places.
	* configure.ac (AC_TRY_LIBGUILE): Add a check for
	scm_set_automatic_finalization_enabled.
	* configure: Regenerated.

2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
	SAL, if possible.

2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-nat.c (struct arch_lwp_info): New.
	(s390_fix_watch_points): Rename to...
	(s390_prepare_to_resume): ...this.  Skip the PER info update
	unless the watch points have changed.
	(s390_refresh_per_info, s390_new_thread): New functions.
	(s390_insert_watchpoint): Call s390_refresh_per_info instead of
	s390_fix_watch_points.
	(s390_remove_watchpoint): Likewise.
	(_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
	Register s390_prepare_to_resume.

2015-03-09  Pedro Alves  <palves@redhat.com>

	Revert:
	2015-03-07  Pedro Alves  <palves@redhat.com>
	* common/gdb_socket.h: New file.
	* ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
	sys/socket.h.
	(net_open): Use union gdb_sockaddr_u.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* configure.ac (build_warnings): Move -Wmissing-prototypes
	-Wdeclaration-after-statement -Wmissing-parameter-type
	-Wold-style-declaration -Wold-style-definition to the C-specific
	set.
	* configure: Regenerate.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/gdb_socket.h: New file.
	* ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
	sys/socket.h.
	(net_open): Use union gdb_sockaddr_u.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.c [!__cplusplus] (enum catcher_state)
	(exceptions_state_mc_action_iter)
	(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
	Don't define.
	[__cplusplus] (try_scope_depth): New global.
	[__cplusplus] (exception_try_scope_entry)
	(exception_try_scope_exit, gdb_exception_sliced_copy)
	(exception_rethrow): New functions.
	(throw_exception): In C++ mode, throw
	gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
	gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
	(throw_it): In C++ mode, use try_scope_depth.
	* common/common-exceptions.h [!__cplusplus]
	(exceptions_state_mc_action_iter)
	(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
	Don't declare.
	[__cplusplus] (exception_try_scope_entry)
	(exception_try_scope_exit, exception_rethrow): Declare.
	[__cplusplus] (struct exception_try_scope): New struct.
	[__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
	C++ exceptions.
	(struct gdb_exception_RETURN_MASK_ALL)
	(struct gdb_exception_RETURN_MASK_ERROR)
	(struct gdb_exception_RETURN_MASK_QUIT): New types.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* main.c (handle_command_errors): Remove volatile qualifier from
	parameter.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (save_breakpoints): Adjust to avoid code between
	TRY and CATCH.
	* gdbtypes.c (safe_parse_type): Remove empty line.
	(types_deeply_equal):
	* guile/scm-frame.c (gdbscm_frame_name):
	* linux-thread-db.c (find_new_threads_once):
	* python/py-breakpoint.c (bppy_get_commands):
	* record-btrace.c (record_btrace_insert_breakpoint)
	(record_btrace_remove_breakpoint, record_btrace_start_replaying)
	(record_btrace_start_replaying): Adjust to avoid code between TRY
	and CATCH.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.c (struct catcher) <exception>: No
	longer a pointer to volatile exception.  Now an exception value.
	<mask>: Delete field.
	(exceptions_state_mc_init): Remove all parameters.  Adjust.
	(exceptions_state_mc): No longer pop the catcher here.
	(exceptions_state_mc_catch): New function.
	(throw_exception): Adjust.
	* common/common-exceptions.h (exceptions_state_mc_init): Remove
	all parameters.
	(exceptions_state_mc_catch): Declare.
	(TRY_CATCH): Rename to ...
	(TRY): ... this.  Remove EXCEPTION and MASK parameters.
	(CATCH, END_CATCH): New.
	All callers adjusted.

2015-03-07  Tom Tromey  <tromey@redhat.com>

	* top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
	(amd64_epilogue_frame_cache): Normal exception handling code.
	* break-catch-throw.c (check_status_exception_catchpoint)
	(re_set_exception_catchpoint): Ditto.
	* cli/cli-interp.c (safe_execute_command):
	* cli/cli-script.c (script_from_file): Ditto.
	* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
	Ditto.
	* compile/compile-object-run.c (compile_object_run): Ditto.
	* cp-abi.c (baseclass_offset): Ditto.
	* cp-valprint.c (cp_print_value): Ditto.
	* exceptions.c (catch_exceptions_with_msg):
	* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
	* frame.c (get_frame_address_in_block_if_available): Ditto.
	* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
	(i386_sigtramp_frame_cache): Ditto.
	* infcmd.c (post_create_inferior): Ditto.
	* linespec.c (parse_linespec, find_linespec_symbols):
	* p-valprint.c (pascal_object_print_value): Ditto.
	* parse.c (parse_expression_for_completion): Ditto.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
	* remote.c (remote_get_noisy_reply): Ditto.
	* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
	* solib-svr4.c (solib_svr4_r_map): Ditto.

2015-03-06  Gary Benson  <gbenson@redhat.com>

	* common/common-utils.h (startswith): New inline function.
	All places where this logic was used updated to use the above.

2015-03-05  Pedro Alves  <palves@redhat.com>

	PR gdb/18002
	* mem-break.c (default_memory_insert_breakpoint): Set shadow_len
	after reading the breakpoint's shadow memory.

2015-03-05  Mark Kettenis  <kettenis@gnu.org>

	* hppabsd-nat.c: Remove file.
	* hppaobsd-nat.c: New file.
	* Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
	hppaobsd-nat.c.
	* config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
	hppaobsd-nat.o.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
	(target_decr_pc_after_break): Delete declaration.
	* target.c (default_target_decr_pc_after_break)
	(target_decr_pc_after_break): Delete.
	* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
	gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
	* linux-thread-db.c (check_event): Likewise.
	* infrun.c (adjust_pc_after_break): Likewise.
	* darwin-nat.c (cancel_breakpoint): Likewise.
	* aix-thread.c (aix_thread_wait): Likewise.
	* target-delegates.c: Regenerate.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (save_sigtrap): Check for breakpoints before
	checking watchpoints.
	(status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
	breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
	(check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
	a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
	(linux_nat_stopped_by_sw_breakpoint)
	(linux_nat_supports_stopped_by_sw_breakpoint)
	(linux_nat_stopped_by_hw_breakpoint)
	(linux_nat_supports_stopped_by_hw_breakpoint): New functions.
	(linux_nat_wait_1): Don't re-increment the PC if relying on
	SIGTRAP's siginfo->si_code.
	(linux_nat_add_target): Install new target methods.
	* linux-thread-db.c (check_event): Don't account for breakpoint PC
	offset if the target already adjusted the PC.
	* nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
	(GDB_ARCH_TRAP_BRKPT): New.
	(TRAP_HWBKPT): Define if not already defined.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
	* remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
	Delete field.
	<stop_reason>: New field.
	(PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
	(packet_set_cmd_state): New function.
	(remote_protocol_features): Register the "swbreak" and "hwbreak"
	features.
	(remote_query_supported): If not disabled with the corresponding
	"set remote foo-packet" command, report support for the swbreak
	and hwbreak features.
	(struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
	field.
	<stop_reason>: New field.
	(remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
	(remote_wait_as): Adjust.
	(remote_stopped_by_sw_breakpoint)
	(remote_supports_stopped_by_sw_breakpoint)
	(remote_stopped_by_hw_breakpoint)
	(remote_supports_stopped_by_hw_breakpoint): New functions.
	(remote_stopped_by_watchpoint): New function.
	(init_remote_ops): Install them.
	(_initialize_remote): Register new "set/show remote
	swbreak-feature-packet" and "set/show remote
	swbreak-feature-packet" commands.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* btrace.h: Include target/waitstatus.h.
	(struct btrace_thread_info) <stop_reason>: New field.
	* record-btrace.c (record_btrace_step_thread): Use
	record_check_stopped_by_breakpoint instead of breakpoint_here_p.
	(record_btrace_decr_pc_after_break): Delete.
	(record_btrace_stopped_by_sw_breakpoint)
	(record_btrace_supports_stopped_by_sw_breakpoint)
	(record_btrace_stopped_by_hw_breakpoint)
	(record_btrace_supports_stopped_by_hw_breakpoint): New functions.
	(init_record_btrace_ops): Install them.
	* record-full.c (record_full_hw_watchpoint): Delete and replace
	with ...
	(record_full_stop_reason): ... this throughout.
	(record_full_exec_insn): Adjust.
	(record_full_wait_1): Adjust.  No longer re-increment the PC.
	(record_full_wait_1): Adjust.  Use
	record_check_stopped_by_breakpoint instead of breakpoint_here_p.
	(record_full_stopped_by_watchpoint): Adjust.
	(record_full_stopped_by_sw_breakpoint)
	(record_full_supports_stopped_by_sw_breakpoint)
	(record_full_supports_stopped_by_sw_breakpoint)
	(record_full_stopped_by_hw_breakpoint)
	(record_full_supports_stopped_by_hw_breakpoint): New functions.
	(init_record_full_ops, init_record_full_core_ops): Install them.
	* record.c (record_check_stopped_by_breakpoint): New function.
	* record.h: Include target/waitstatus.h.
	(record_check_stopped_by_breakpoint): New declaration.

2015-03-04  Pedro Alves  <palves@redhat.com>

	enum lwp_stop_reason -> enum target_stop_reason
	* linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
	(linux_nat_stopped_by_watchpoint, status_callback)
	(linux_nat_wait_1): Adjust.
	* linux-nat.h (enum lwp_stop_reason): Delete.
	(struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
	* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
	* target/waitstatus.h (enum target_stop_reason): New.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (need_moribund_for_location_type): New function.
	(bpstat_stop_status): Don't skipping checking moribund locations
	of breakpoint types which the target tell caused a stop.
	(program_breakpoint_here_p): New function, factored out from ...
	(bp_loc_is_permanent): ... this.
	(update_global_location_list): Don't create a moribund location if
	the target supports reporting stops of the type of the removed
	breakpoint.
	* breakpoint.h (program_breakpoint_here_p): New declaration.
	* infrun.c (adjust_pc_after_break): Return early if the target has
	already adjusted the PC.  Add comments.
	(handle_signal_stop): If nothing explains a signal, and the target
	tells us the stop was caused by a software breakpoint, check if
	there's a breakpoint instruction in the memory.  If so, adjust the
	PC before presenting the stop to the user.  Otherwise, ignore the
	trap.  If nothing explains a signal, and the target tells us the
	stop was caused by a hardware breakpoint, ignore the trap.
	* target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
	to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
	to_supports_stopped_by_hw_breakpoint>: New fields.
	(target_stopped_by_sw_breakpoint)
	(target_supports_stopped_by_sw_breakpoint)
	(target_stopped_by_hw_breakpoint)
	(target_supports_stopped_by_hw_breakpoint): Define.
	* target-delegates.c: Regenerate.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* infrun.c (follow_fork_inferior): Use the whole of the
	inferior_ptid and pending_follow.related_pid ptids instead of
	building ptids from the process components.  Adjust verbose output
	to use target_pid_to_str.
	* linux-nat.c (linux_child_follow_fork): Use the whole of the
	inferior_ptid and pending_follow.related_pid ptids instead of
	building ptids from the process components.

2015-03-04  Mark Kettenis  <kettenis@gnu.org>

	* inf-ptrace.c [PT_GET_PROCESS_STATE]
	(inf_ptrace_insert_fork_catchpoint): New function.
	(inf_ptrace_remove_fork_catchpoint): New function.
	(inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_register_name): Return empty string
	instead of NULL for registers that shouldn't be visible.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
	XML file for 64-bit targets.

2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>

	* target.h (find_default_create_inferior): Remove declaration.
	(find_default_attach): Likewise.

2015-03-03  Pedro Alves  <palves@redhat.com>

	* inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
	Use ptid_get_pid to get the overall process id when resuming all
	threads.

2015-03-03  Pedro Alves  <palves@redhat.com>

	* i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
	the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
	* inf-ptrace.c (get_ptrace_pid): New function.
	(inf_ptrace_resume): Use it.
	* linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
	to the lower layer.

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.c: Include sys/utsname.h.
	(linux_determine_kernel_ptr_bits): New.
	(linux_enable_bts): Call linux_determine_kernel_ptr_bits.
	* x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
	ptr_bits.

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (ftrace_update_function): Treat return as tailcall for
	"_dl_runtime_resolve".

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (btrace_function) <lbegin, lend>: Remove.
	* btrace.c (ftrace_debug): Do not print the line range.
	(ftrace_skip_file, ftrace_update_lines): Remove.
	(ftrace_new_function): Remove lbegin and lend initialization.
	(btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
	* record-btrace.c (btrace_compute_src_line_range): New.
	(btrace_call_history_src_line): Call btrace_compute_src_line_range.

2015-03-02  Pedro Alves  <palves@redhat.com>

	* infrun.c (follow_exec): Delete all threads of the process except
	the event thread.  Extended comments.

2015-03-02  Joel Brobecker  <brobecker@adacore.com>

	* contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".

2015-03-02  Joel Brobecker  <brobecker@adacore.com>

	* utils.h: Remove <stdbool.h> #include.
	(producer_is_gcc): Change return type to "int".
	* utils.c (producer_is_gcc): Change return type to int.
	Return 1 instead of true, and 0 instead of false.
	Adjust function documentation accordingly.

2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-nat.c (have_regset_vxrs): New static variable.
	(s390_linux_fetch_inferior_registers): Handle vector registers, if
	present.
	(s390_linux_store_inferior_registers): Likewise.
	(s390_get_hwcap): Remove function.  Embed its logic...
	(s390_read_description): ...here.  Yield a target description with
	vector registers if applicable.
	* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
	"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
	"features/s390x-tevx-linux64.c".
	(struct gdbarch_tdep) <v0_full_regnum>: New field.
	(s390_dwarf_regmap): Add vector registers.  Remove bogus entries
	for "GNU/Linux-specific registers".
	(s390_dwarf_reg_r0l): New enum value.
	(s390_dwarf_reg_to_regnum): Support vector registers.
	(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
	of GPR lower halves.
	(regnum_is_vxr_full): New function.
	(s390_register_name): New function.
	(s390_pseudo_register_name): Handle v0-v15, which are composed of
	f0-f15 and v0l-v15l.
	(s390_pseudo_register_type): Likewise.
	(s390_pseudo_register_read): Likewise.
	(s390_pseudo_register_write): Likewise.
	(s390_value_from_register): Account for the fact that values are
	placed left-justified in vector registers.
	(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
	the vector reggroup and omit them from the general reggroup.
	(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
	(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
	(s390_iterate_over_regset_sections): Add iterations for the two
	new vector regsets.
	(s390_core_read_description): Yield a target description with
	vector registers if applicable.
	(s390_gdbarch_init): Handle target descriptions with vector
	registers.  Add "register_name" gdbarch method.
	(_initialize_s390_tdep): Call new tdesc initialization functions.
	* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
	(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
	(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
	(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
	(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
	(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
	(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
	(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
	(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
	(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
	(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
	(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
	(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
	(S390_NUM_REGS): Adjust value.
	(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
	(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
	(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
	* NEWS: Announce S/390 vector register support.

2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* features/s390-tevx-linux64.xml: New file.
	* features/s390-vx-linux64.xml: New file.
	* features/s390-vx.xml: New file.
	* features/s390x-tevx-linux64.xml: New file.
	* features/s390x-vx-linux64.xml: New file.
	* features/Makefile (WHICH): Add s390-vx-linux64,
	s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
	(s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
	(s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
	macros.
	* features/s390-tevx-linux64.c: New generated file.
	* features/s390-vx-linux64.c: Likewise.
	* features/s390x-tevx-linux64.c: Likewise.
	* features/s390x-vx-linux64.c: Likewise.
	* regformats/s390-tevx-linux64.dat: Likewise.
	* regformats/s390-vx-linux64.dat: Likewise.
	* regformats/s390x-tevx-linux64.dat: Likewise.
	* regformats/s390x-vx-linux64.dat: Likewise.

2015-02-28  Doug Evans  <xdje42@gmail.com>

	* symtab.h (struct symtab) <next>: Fix comment.

2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>

	* python/python.c (python_GdbModuleDef): Rename GdbMethods to
	python_GdbMethods.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* dtrace-probe.c (dtrace_probe_ops): Make extern.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.h (exception_none): Declare.
	* common/common-exceptions.c (exception_none): Moved from
	exceptions.c.
	(exceptions_state_mc_init): Use exception_none.
	* exceptions.c (exception_none): Move to
	common/common-exceptions.c.
	* exceptions.h (exception_none): Move to
	common/common-exceptions.h.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* main.c (catch_command_errors, catch_command_errors_const):
	Remove 'mask' argument.  Adjust.
	(captured_main): Adjust callers.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* python/python-internal.h: Include "extension-priv.h".

2015-02-27  Pedro Alves  <palves@redhat.com>

	* breakpoint.h (enum print_stop_action): Move further up in the
	file.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* gdbarch.sh: Include regcache.h.
	* gdbarch.h: Regenerate.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
	Remove duplicate const.
	* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
	duplicate const.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
	* guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
	* features/feature_to_c.sh: Tag the generated xml_builtin array
	with extern const in C++ mode.

2015-02-27  Tom Tromey  <tromey@redhat.com>

	* minidebug.c (struct lzma_stream): Rename to ...
	(struct gdb_lzma_stream): ... this.
	(lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
	function.
	(mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
	(mi_cmd_stack_list_variables): Use it.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* x86-linux-nat.c (u_debugreg_offset): New function.
	(x86_linux_dr_get, x86_linux_dr_set): Use it.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
	declaration.
	Include break-common.h.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves <palves@redhat.com>

	* arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
	local used to iterate over enums.
	* completer.c (signal_completer): Likewise.
	* i386-tdep.c (i386_stap_parse_special_token): Likewise.
	* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
	* tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
	* tui/tui-layout.c (next_layout, prev_layout): Likewise.
	* tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
	(tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
	* tui-wingeneral.c (tui_refresh_all):  Likewise.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* target.h: Include "infrun.h".

2015-02-27  Pedro Alves  <palves@redhat.com>

	* gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* common/agent.h (IPA_SYM_EXPORTED_NAME): New.
	(IPA_SYM): Use it.
	* common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* cli-out.c (_rl_erase_entire_line): Move declaration out of
	cli_mld_erase_entire_line, and make it extern "C".
	* common/common-defs.h (EXTERN_C): New.
	* completer.c (_rl_completion_prefix_display_length)
	(_rl_print_completions_horizontally, QSFUNC): Move declarations
	out of gdb_display_match_list_1.
	(_rl_qsort_string_compare): Move declaration out of
	gdb_display_match_list_1, and make it extern "C".
	* defs.h (re_comp): Use EXTERN_C.
	* maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
	and make it extern "C".
	(monstartup): Move declaration out of maintenance_set_profile_cmd,
	and make it extern "C".
	(main): Move declaration out of maintenance_set_profile_cmd.
	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
	EXTERN_C.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* python/python.c (GdbMethods): Rename to ...
	(python_GdbMethods): ... this and make extern.
	(GdbModuleDef): Rename to ...
	(python_GdbModuleDef): ... this and make extern.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* record-btrace.c (set_record_btrace_cmdlist)
	(show_record_btrace_cmdlist): Remove redefinitions.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* dwarf2-frame.c (enum cfa_how_kind, struct
	dwarf2_frame_state_reg_info): Move out of struct
	dwarf2_frame_state.
	* dwarf2read.c (struct tu_stats): Move out of struct
	dwarf2_per_objfile.
	(struct file_entry): Move out of struct line_header.
	(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
	typedef_field_list): Move out of struct field_info.
	* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
	Move out of struct dynamic_prop.
	(union type_owner, union field_location, struct field, struct
	range_bounds, union type_specific): Move out of struct main_type.
	(struct fn_fieldlist, struct fn_field, struct typedef_field)
	(VOFFSET_STATIC): Move out of struct cplus_struct_type.
	(struct call_site_target, union call_site_parameter_u, struct
	call_site_parameter): Move out of struct call_site.
	* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
	m32c_prologue.
	(enum srcdest_kind): Move out of struct srcdest.
	* main.c (enum cmdarg_kind): Move out of struct cmdarg.
	* prologue-value.h (enum prologue_value_kind): Move out of struct
	prologue_value.
	* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
	gdbarch_tdep.
	* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
	out of struct field_info.
	* symfile.h (struct other_sections): Move out of struct
	section_addr_info.
	* symtab.c (struct symbol_cache_slot): Move out struct
	block_symbol_cache.
	* target-descriptions.c (enum tdesc_type_kind): Move out of
	typedef struct tdesc_type.
	* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
	struct tui_line_or_address.
	* value.c (enum internalvar_kind, union internalvar_data): Move
	out of struct internalvar.
	* xtensa-tdep.h (struct ctype_cache): Move out of struct
	gdbarch_tdep.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	Rename symbols whose names are reserved C++ keywords throughout.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* Makefile.in (COMPILER): New, get it from autoconf.
	(COMPILE.pre, CC_LD): Use COMPILER.
	(CXX): Get from autoconf instead.
	(CXX_FOR_TARGET): Default to g++ instead of gcc.
	* acinclude.m4: Include build-with-cxx.m4.
	* build-with-cxx.m4: New file.
	* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
	Disable -Werror by default if building in C++ mode.
	(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
	-Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
	Run supported-warning-flags tests with the C++ compiler.
	Save/restore CXXFLAGS too.
	* configure: Regenerate.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* libiberty.m4: New file.
	* acinclude.m4: Include libiberty.m4.
	* configure.ac: Call libiberty_INIT.
	* config.in, configure: Regenerate.

2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_gcc_target_options): Not just handle
	31-bit targets, but 64-bit targets as well.
	(s390_gnu_triplet_regexp): New function.
	(s390_gdbarch_init): Set the gcc_target_options gdbarch method for
	64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
	method.

2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)

	* windows-nat.c (CONTEXT_DEBUGGER): Remove.
	(CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
	from CONTEXT_DEBUGGER.

2015-02-26  Doug Evans  <dje@google.com>

	* gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
	CHECK_TYPEDEF.
	(set_type_vptr_fieldno): Ditto.
	(internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
	* gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.

2015-02-26  Pedro Alves  <palves@redhat.com>

	* auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
	* complaints.c (vcomplaint): Pass argument FMT directly to
	printf-like functions instead of complaint->fmt.
	* ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
	* darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
	* compile/compile-loc2c.c (pushf, unary, binary): Add
	ATTRIBUTE_PRINTF.
	(do_compile_dwarf_expr_to_c): Pass string literal as format string
	to pushf.
	(BINARY): Pass string literal as format string to 'binary'.
	* compile/compile-object-load.c (link_callbacks_einfo): Add
	ATTRIBUTE_PRINTF.
	* guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.

2015-02-26  Pedro Alves  <palves@redhat.com>

	* windows-termcap.c: Rename to ...
	* stub-termcap.c: ... this.  Adjust header line.
	* Makefile.in (SFILES): Refer to stub-termcap.c instead of
	windows-termcap.c.
	* configure: Regenerate.
	* configure.ac: Refer to stub-termcap.o instead of
	windows-termcap.o.
	* gdb_curses.h: Mention stub-termcap.c instead of
	windows-termcap.c.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
	(gcc_symbol_address): Call gnu_ifunc_resolve_addr.

2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* gdb/infcmd.c (print_return_value): use type_to_string to print type.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
	bfd_canonicalize_symtab.

2015-02-25  John Baldwin  <jhb@FreeBSD.org>

	* amd64fbsd-nat.c: Include sys/user.h.
	(_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
	instead of KERN_PS_STRINGS to locate the signal trampoline.
	* i386fbsd-nat.c: Include sys/user.h.
	(_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
	instead of KERN_PS_STRINGS to locate the signal trampoline.
	* amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
	(amd64fbsd_sigtramp_p): New.
	(amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
	longer set default values.
	(amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
	* i386fbsd-tdep.c (i386fbsd_sigtramp_start)
	(i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
	(i386fbsd_freebsd4_sigtramp_start)
	(i386fbsd_freebsd4_sigtramp_middle)
	(i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
	(i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
	(i386fbsd_sigtramp_p): New.
	(i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
	longer set default values.
	(i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".

2015-02-25  John Baldwin  <jhb@freebsd.org>

	* amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
	get_frame_register instead of frame_unwind_register_unsigned.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR build/18033
	* compile/compile-c-support.c (c_compute_program): Change // comment.
	* compile/compile-object-load.c (setup_sections): Change // comment.

2015-02-26  Joel Brobecker  <brobecker@adacore.com>

	PR build/18033:
	* iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.

2015-02-23  Pedro Alves  <palves@redhat.com>

	* remote.c (skip_to_semicolon): New function.
	(remote_parse_stop_reply) <T stop reply>: Use it.  Don't
	special case the stop reasons that look like hex numbers
	upfront.  Instead handle real register numbers after matching
	all the known stop reasons.

2015-02-21  Doug Evans  <dje@google.com>

	PR c++/17976, symtab/17821
	* cp-namespace.c (cp_search_static_and_baseclasses): New parameter
	is_in_anonymous.  All callers updated.
	(find_symbol_in_baseclass): Ditto.
	(cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
	for symbols in an anonymous namespace.
	* dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
	DW_AT_name directly.
	(dwarf2_name): Convert missing namespace name to
	CP_ANONYMOUS_NAMESPACE_STR.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait): Call
	thread_db_notice_clone whenever a new clone LWP is detected.
	(linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
	functions.
	* linux-nat.h (thread_db_attach_lwp): Delete declaration.
	(thread_db_notice_clone, linux_stop_and_wait_all_lwps)
	(linux_unstop_all_lwps): Declare.
	* linux-thread-db.c (struct thread_get_info_inout): Delete.
	(thread_get_info_callback): Delete.
	(thread_from_lwp): Use td_thr_get_info and record_thread.
	(thread_db_attach_lwp): Delete.
	(thread_db_notice_clone): New function.
	(try_thread_db_load_1): If /proc is mounted and shows the
	process'es task list, walk over all LWPs and call thread_from_lwp
	instead of relying on td_ta_thr_iter.
	(attach_thread): Don't call check_thread_signals here.  Split the
	tail part of the function (which adds the thread to the core GDB
	thread list) to ...
	(record_thread): ... this function.  Call check_thread_signals
	here.
	(thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
	call thread_from_lwp.
	(thread_db_update_thread_list): Rename to ...
	(thread_db_update_thread_list_org): ... this.
	(thread_db_update_thread_list): New function.
	(thread_db_find_thread_from_tid): Delete.
	(thread_db_get_ada_task_ptid): Simplify.
	* nat/linux-procfs.c: Include <sys/stat.h>.
	(linux_proc_task_list_dir_exists): New function.
	* nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (lin_lwp_attach_lwp): No longer special case the
	main LWP.  Handle the case of waitpid returning 0 if we're already
	attached to the LWP.  Don't set the LWP's last_resume_kind to
	resume_stop if we already knew about the LWP.
	(linux_nat_filter_event): Add debug logs.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* target.h (forward_target_decr_pc_after_break): Delete
	declaration.

2015-02-20  Pedro Alves  <palves@redhat.com>

	PR threads/18006
	* linux-thread-db.c (thread_get_info_callback): Return early if
	the thread's lwp id is -1.

2015-02-20  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.9 released.

2015-02-19  Steve Ellcey  <sellcey@imgtec.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
	(dtrace_get_probes) Change type of variable 'dof'.

2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	PR breakpoints/16812
	* linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
	* nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
	* nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.

2015-02-19  David Taylor  <dtaylor@emc.com>

	* common/ax.def (setv): Fix consumed entry in setv DEFOP.

2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_handle_resize_during_io): Remove this
	function.
	(tui_putc): Don't call tui_handle_resize_during_io.
	(tui_getc): Likewise.
	(tui_mld_getc): Likewise.
	* tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
	(tui_sigwinch_token): New static variable.
	(tui_initialize_win): Adjust documentation.  Set
	tui_sigwinch_token.
	(tui_async_resize_screen): New asynchronous callback.
	(tui_sigwinch_handler): Adjust documentation.  Asynchronously
	invoke tui_async_resize_screen.

2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* configure: Regenerated.
	* configure.ac: Use GDB_AC_TRANSFORM.
	* Makefile.in (aclocal_m4_deps): Added transform.m4.
	* acinclude.m4: sinclude transform.m4.
	* transform.m4: New file.
	(GDB_AC_TRANSFORM): New macro.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* NEWS: Announce the support for DTrace SDT probes.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
	(amd64_dtrace_parse_probe_argument): New function.
	(amd64_dtrace_probe_is_enabled): Likewise.
	(amd64_dtrace_enable_probe): Likewise.
	(amd64_dtrace_disable_probe): Likewise.
	(amd64_linux_init_abi): Register the
	`gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
	`gdbarch_dtrace_disable_probe' and
	`gdbarch_dtrace_probe_is_enabled' hooks.
	(amd64_dtrace_disabled_probe_sequence_1): New constant.
	(amd64_dtrace_disabled_probe_sequence_2): Likewise.
	(amd64_dtrace_enable_probe_sequence): Likewise.
	(amd64_dtrace_disable_probe_sequence): Likewise.

2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
	the -probe-dtrace new vpossible value for PROBE_MODIFIER.
	* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
	handle ELF files.
	* Makefile.in (SFILES): dtrace-probe.c added.
	* configure: Regenerate.
	* dtrace-probe.c: New file.
	(SHT_SUNW_dof): New constant.
	(dtrace_probe_type): New enum.
	(dtrace_probe_arg): New struct.
	(dtrace_probe_arg_s): New typedef.
	(struct dtrace_probe_enabler): New struct.
	(dtrace_probe_enabler_s): New typedef.
	(dtrace_probe): New struct.
	(dtrace_probe_is_linespec): New function.
	(dtrace_dof_sect_type): New enum.
	(dtrace_dof_dofh_ident): Likewise.
	(dtrace_dof_encoding): Likewise.
	(DTRACE_DOF_ENCODE_LSB): Likewise.
	(DTRACE_DOF_ENCODE_MSB): Likewise.
	(dtrace_dof_hdr): New struct.
	(dtrace_dof_sect): Likewise.
	(dtrace_dof_provider): Likewise.
	(dtrace_dof_probe): Likewise.
	(DOF_UINT): New macro.
	(DTRACE_DOF_PTR): Likewise.
	(DTRACE_DOF_SECT): Likewise.
	(dtrace_process_dof_probe): New function.
	(dtrace_process_dof): Likewise.
	(dtrace_build_arg_exprs): Likewise.
	(dtrace_get_arg): Likewise.
	(dtrace_get_probes): Likewise.
	(dtrace_get_probe_argument_count): Likewise.
	(dtrace_can_evaluate_probe_arguments): Likewise.
	(dtrace_evaluate_probe_argument): Likewise.
	(dtrace_compile_to_ax): Likewise.
	(dtrace_probe_destroy): Likewise.
	(dtrace_gen_info_probes_table_header): Likewise.
	(dtrace_gen_info_probes_table_values): Likewise.
	(dtrace_probe_is_enabled): Likewise.
	(dtrace_probe_ops): New variable.
	(info_probes_dtrace_command): New function.
	(_initialize_dtrace_probe): Likewise.
	(dtrace_type_name): Likewise.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* gdbarch.sh (dtrace_parse_probe_argument): New.
	(dtrace_probe_is_enabled): Likewise.
	(dtrace_enable_probe): Likewise.
	(dtrace_disable_probe): Likewise.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* stap-probe.c (stap_probe_ops): Add NULLs in the static
	stap_probe_ops for `enable_probe' and `disable_probe'.
	* probe.c (enable_probes_command): New function.
	(disable_probes_command): Likewise.
	(_initialize_probe): Define the cli commands `enable probe' and
	`disable probe'.
	(parse_probe_linespec): New function.
	(info_probes_for_ops): Use parse_probe_linespec.
	* probe.h (probe_ops): New hooks `enable_probe' and
	`disable_probe'.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* probe.c (compute_probe_arg): Moved from stap-probe.c
	(compile_probe_arg): Likewise.
	(probe_funcs): Likewise.
	* stap-probe.c (compute_probe_arg): Moved to probe.c.
	(compile_probe_arg): Likewise.
	(probe_funcs): Likewise.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* probe.c (print_ui_out_not_applicables): New function.
	(exists_probe_with_pops): Likewise.
	(info_probes_for_ops): Do not include column headers for probe
	types for which no probe has been actually found on any object.
	Also invoke `print_ui_out_not_applicables' in order to match the
	column rows with the header when probes of several types are
	listed.
	Print the "Type" column.
	* probe.h (probe_ops): Added a new probe operation `type_name'.
	* stap-probe.c (stap_probe_ops): Add `stap_type_name'.
	(stap_type_name): New function.

2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_getc): Don't call key_is_command_char.
	(key_is_command_char): Delete.

2015-02-17  Pedro Alves  <palves@redhat.com>

	* tui/tui.c (tui_enable): Resize windows before anything
	might show a window.

2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>

	PR gdb/17984
	* aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
	(aarch64_linux_read_description): Remove initialize_tdesc_aarch64
	call.
	* aarch64-tdep.h (tdesc_aarch64): Declare.

2015-02-12  Mark Wielaard  <mjw@redhat.com>

	* contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".

2015-02-13  Doug Evans  <dje@google.com>

	* cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
	anonymous_namespace to is_in_anonymous for consistency with the rest
	of the file.
	(cp_lookup_bare_symbol): Fix typo in comment.
	(cp_search_static_and_baseclasses): Ditto.
	(search_symbol_list): Use vertical space in comment better.
	(reset_directive_searched): Ditto. Fix typo.
	(cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.

2015-02-13  Yao Qi  <yao.qi@arm.com>

	* MAINTAINERS: Update my email address.

2015-02-12  Doug Evans  <dje@google.com>

	* symtab.c (completion_list_add_name): Fix memory leak.

2015-02-12  Doug Evans  <dje@google.com>

	* completer.c (complete_line): Remove incorrect comment.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_single_arg, enumerate_locals)
	(py_print_frame): Use RETURN_MASK_ERROR.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
	function comment.  Wrap all function that can throw in cleanups.
	(gdbpy_apply_frame_filter): Wrap all function that can throw in
	cleanups.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Substitute goto error.
	Remove the error label.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Put conditional code paths
	with goto first, indent the former else codepath left.  Put variable
	'elided' to a new inner block.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Whitespacing fixes.

2015-02-11  Pedro Alves  <palves@redhat.com>

	* xcoffread.c (within_function): Delete.

2015-02-11  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves <palves@redhat.com>

	* breakpoint.c (base_breakpoint_ops): Delete.
	* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
	* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
	* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
	* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
	* python/py-arch.c (arch_object_type): Make extern.
	* python/py-block.c (block_syms_iterator_object_type): Make extern.
	* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
	* python/py-cmd.c (cmdpy_object_type): Make extern.
	* python/py-continueevent.c (continue_event_object_type)
	* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
	parameter.  Update all callers.
	* python/py-evtregistry.c (eventregistry_object_type): Make extern.
	* python/py-exitedevent.c (exited_event_object_type): Make extern.
	* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
	* python/py-function.c (fnpy_object_type): Make extern.
	* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
	* python/py-infevents.c (call_pre_event_object_type)
	(inferior_call_post_event_object_type).
	(memory_changed_event_object_type): Make extern.
	* python/py-infthread.c (thread_object_type): Make extern.
	* python/py-lazy-string.c (lazy_string_object_type): Make extern.
	* python/py-linetable.c (linetable_entry_object_type)
	(linetable_object_type, ltpy_iterator_object_type): Make extern.
	* python/py-newobjfileevent.c (new_objfile_event_object_type)
	(clear_objfiles_event_object_type): Make extern.
	* python/py-objfile.c (objfile_object_type): Make extern.
	* python/py-param.c (parmpy_object_type): Make extern.
	* python/py-progspace.c (pspace_object_type): Make extern.
	* python/py-signalevent.c (signal_event_object_type): Make extern.
	* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
	* python/py-type.c (type_object_type, field_object_type)
	(type_iterator_object_type): Make extern.
	* python/python.c (python_extension_script_ops)
	(python_extension_ops): Make extern.
	* stap-probe.c (stap_probe_ops): Make extern.

2015-02-11  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (adjust_pc_after_break): Don't adjust the PC just
	because the event thread is not the current thread.

2015-02-11  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
	been initialized yet, return NULL.

2015-02-11  Doug Evans  <dje@google.com>

	* symfile.h (new_symfile_objfile): Delete.
	* symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
	All callers updated.

2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_handle_resize_during_io): Call
	tui_update_gdb_sizes() after resizing the screen.
	* tui/tui.c (tui_enable): Resize the terminal before
	calling tui_update_gdb_sizes().

2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_getc): Move cursor to the end of the command
	line before printing a newline.

2015-02-11  Mark Wielaard  <mjw@redhat.com>

	* utils.c (producer_is_gcc): Return true or false.

2015-02-10  Mark Wielaard  <mjw@redhat.com>

	* utils.h (producer_is_gcc): Change return type to bool. Add major
	argument.
	* utils.c (producer_is_gcc): Likewise.
	(producer_is_gcc_ge_4): Adjust producer_is_gcc call.
	* dwarf2read.c (check_producer): Likewise.

2015-02-10  Pedro Alves  <palves@redhat.com>

	* infrun.c (displaced_step_fixup): Switch to the event thread
	before calling gdbarch_displaced_step_fixup.

2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>

	* MAINTAINERS (Write After Approval): Add Antoine Tremblay.

2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>

	* ada-varobj.c (ada_name_of_child): Constify parent.
	(ada_path_expr_of_child): Same.
	(ada_value_of_child): Same.
	(ada_type_of_child): Same.
	* c-varobj.c (c_is_path_expr_parent): Same.
	(c_describe_child): Same.
	(c_name_of_child): Same.
	(c_value_of_child): Same.
	(c_type_of_child): Same.
	(cplus_number_of_children): Same.
	(cplus_describe_child): Constify var.
	(cplus_name_of_child): Constify parent.
	(cplus_value_of_child): Same.
	(cplus_type_of_child): Same.
	* jv-varobj.c (java_name_of_child): Same.
	(java_value_of_child): Same.
	(java_type_of_child): Same.
	* varobj.c (value_of_child): Same.
	(varobj_default_is_path_expr_parent): Constify var, parent and return
	value.
	(varobj_get_path_expr): Constify var, modify path_expr through
	mutable_var.
	(install_new_value): Constify parent.
	(value_of_child): Constify parent.
	* varobj.h (struct varobj): Constify parent.
	(struct lang_varobj_ops): Constify name_of_child, value_of_child and
	type_of_child.
	(varobj_get_path_expr): Constify var.
	(varobj_get_path_expr_parent): Constify var and return value.

2015-02-10  Luis Machado  <lgustavo@codesourcery.com>

	* arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
	(arm_prologue_this_id): Move PC and SP limit checks to
	arm_prologue_unwind_stop_reason.
	(arm_prologue_unwind) <stop_reason> : Set to
	arm_prologue_unwind_stop_reason.

2015-02-09  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
	DW_LANG_Fortran08 as language_fortran.

2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>

	PR remote/17946
	* gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
	of pointer against char.

2015-02-09  Mark Wielaard  <mjw@redhat.com>

	* c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
	(c_type_print_modifier): Likewise.
	* dwarf2read.c (read_tag_atomic_type): New function.
	(read_type_die_1): Handle DW_TAG_atomic_type.
	* gdbtypes.c (make_atomic_type): New function.
	(recursive_dump_type): Handle TYPE_ATOMIC.
	* gdbtypes.h (enum type_flag_values): Renumber.
	(enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
	(TYPE_ATOMIC): New macro.
	(make_atomic_type): Declare.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (ftrace_find_call): Skip gaps.
	(ftrace_new_function): Initialize level.
	(ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
	(ftrace_new_switch): Update
	level computation.
	(ftrace_new_gap): New.
	(ftrace_update_function): Create new function after gap.
	(btrace_compute_ftrace_bts): Create gap on error.
	(btrace_stitch_bts): Update parameters.  Clear trace if it
	becomes empty.
	(btrace_stitch_trace): Update parameters.  Update callers.
	(btrace_clear): Reset the number of gaps.
	(btrace_insn_get): Return NULL if the iterator points to a gap.
	(btrace_insn_number): Return zero if the iterator points to a gap.
	(btrace_insn_end): Allow gaps at the end.
	(btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
	(btrace_find_insn_by_number): Assert that the found iterator does
	not point to a gap.
	(btrace_call_next, btrace_call_prev): Assert that the last function
	is not a gap.
	* btrace.h (btrace_bts_error): New.
	(btrace_function): Update comment.
	(btrace_function) <insn, insn_offset, number>: Update comment.
	(btrace_function) <errcode>: New.
	(btrace_thread_info) <ngaps>: New.
	(btrace_thread_info) <replay>: Update comment.
	(btrace_insn_get): Update comment.
	* record-btrace.c (btrace_ui_out_decode_error): New.
	(record_btrace_info): Print number of gaps.
	(btrace_insn_history, btrace_call_history): Call
	btrace_ui_out_decode_error for gaps.
	(record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
	* nat/linux-btrace.c: (btrace_this_cpu): New.
	(cpu_supports_bts): Call btrace_this_cpu.
	(intel_supports_bts): Add cpu parameter.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (btrace_insn_class): New.
	(btrace_insn) <size, iclass>: New.
	* btrace.c (ftrace_find_call): Update parameters.  Update users.
	Use instruction classification.
	(ftrace_new_return): Update parameters.  Update users.
	(ftrace_update_function): Update parameters.  Update users.  Use
	instruction classification.
	(ftrace_update_insns): Update parameters.  Update users.
	(ftrace_classify_insn): New.
	(btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
	TRY_CATCH around call to gdb_insn_length.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
	Update parameters.  Update users.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (parse_xml_btrace_conf_bts): Add size.
	(btrace_conf_bts_attributes): New.
	(btrace_conf_children): Add attributes.
	* common/btrace-common.h (btrace_config_bts): New.
	(btrace_config)<bts>: New.
	(btrace_config): Update comment.
	* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
	Use config.
	* features/btrace-conf.dtd: Increment version.  Add size
	attribute to bts element.
	* record-btrace.c (set_record_btrace_bts_cmdlist,
	show_record_btrace_bts_cmdlist): New.
	(record_btrace_adjust_size, record_btrace_print_bts_conf,
	record_btrace_print_conf, cmd_set_record_btrace_bts,
	cmd_show_record_btrace_bts): New.
	(record_btrace_info): Call record_btrace_print_conf.
	(_initialize_record_btrace): Add commands.
	* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
	(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
	(btrace_sync_conf): Synchronize bts size.
	(_initialize_remote): Add Qbtrace-conf:bts:size packet.
	* NEWS: Announce new commands and new packets.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* Makefile.in (XMLFILES): Add btrace-conf.dtd.
	* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
	(x86_linux_btrace_conf): New.
	(x86_linux_create_target): Initialize to_btrace_conf.
	* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
	Check format.  Split into this and ...
	(linux_enable_bts): ... this.
	(linux_btrace_conf): New.
	(perf_event_skip_record): Renamed into ...
	(perf_event_skip_bts_record): ... this.  Updated users.
	(linux_disable_btrace): Split into this and ...
	(linux_disable_bts): ... this.
	(linux_read_btrace): Check format.
	* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
	(linux_btrace_conf): New.
	(btrace_target_info)<ptid>: Moved.
	(btrace_target_info)<conf>: New.
	(btrace_target_info): Split into this and ...
	(btrace_tinfo_bts): ... this.  Updated users.
	* btrace.c (btrace_enable): Update parameters.
	(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
	(btrace_conf_children, btrace_conf_attributes)
	(btrace_conf_elements): New.
	* btrace.h (btrace_enable): Update parameters.
	(btrace_conf, parse_xml_btrace_conf): New.
	* common/btrace-common.h (btrace_config): New.
	* feature/btrace-conf.dtd: New.
	* record-btrace.c (record_btrace_conf): New.
	(record_btrace_cmdlist): New.
	(record_btrace_enable_warn, record_btrace_open): Pass
	&record_btrace_conf.
	(record_btrace_info): Print recording format.
	(cmd_record_btrace_bts_start): New.
	(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
	(_initialize_record_btrace): Add "record btrace bts" subcommand.
	Add "record bts" alias command.
	* remote.c (remote_state)<btrace_config>: New.
	(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
	(remote_protocol_features): Add qXfer:btrace-conf:read.
	(remote_open_1): Call remote_btrace_reset.
	(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
	(btrace_target_info)<conf>: New.
	(btrace_sync_conf, btrace_read_config): New.
	(remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
	btrace_read_conf.
	(remote_btrace_conf): New.
	(init_remote_ops): Initialize to_btrace_conf.
	(_initialize_remote): Add qXfer:btrace-conf packet.
	* target.c (target_enable_btrace): Update parameters.
	(target_btrace_conf): New.
	* target.h (target_enable_btrace): Update parameters.
	(target_btrace_conf): New.
	(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
	(target_ops)<to_enable_btrace>: Update parameters and comment.
	(target_ops)<to_btrace_conf>: New.
	* target-delegates: Regenerate.
	* target-debug.h (target_debug_print_const_struct_btrace_config_p)
	(target_debug_print_const_struct_btrace_target_info_p): New.
	* NEWS: Announce new command and new packet.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.h (perf_event_buffer): New.
	(btrace_target_info) <buffer, size, data_head>: Replace with ...
	<bts>: ... this.
	* nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
	(perf_event_buffer_size, perf_event_buffer_begin)
	(perf_event_buffer_end, linux_btrace_has_changed): Removed.
	Updated users.
	(perf_event_new_data): New.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
	* record-btrace.c (record_btrace_open): Remove call to
	target_supports_btrace.
	* remote.c (remote_supports_btrace): Update parameters.
	* target.c (target_supports_btrace): Update parameters.
	* target.h (to_supports_btrace, target_supports_btrace): Update
	parameters.
	* target-delegates.c: Regenerate.
	* target-debug.h (target_debug_print_enum_btrace_format): New.
	* nat/linux-btrace.c
	(kernel_supports_btrace): Rename into ...
	(kernel_supports_bts): ... this.  Update users.  Update warning text.
	(intel_supports_btrace): Rename into ...
	(intel_supports_bts): ... this.  Update users.
	(cpu_supports_btrace): Rename into ...
	(cpu_supports_bts): ... this.  Update users.
	(linux_supports_btrace): Update parameters.  Split into this and ...
	(linux_supports_bts): ... this.
	* nat/linux-btrace.h (linux_supports_btrace): Update parameters.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* Makefile.in (SFILES): Add common/btrace-common.c.
	(COMMON_OBS): Add common/btrace-common.o.
	(btrace-common.o): Add build rules.
	* btrace.c (parse_xml_btrace): Update parameters.
	(parse_xml_btrace_block): Set format field.
	(btrace_add_pc, btrace_fetch): Use struct btrace_data.
	(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
	(btrace_compute_ftrace): Split into this and...
	(btrace_compute_ftrace_bts): ...this.
	(btrace_stitch_trace): Split into this and...
	(btrace_stitch_bts): ...this.
	* btrace.h (parse_xml_btrace): Update parameters.
	(make_cleanup_btrace_data): New.
	* common/btrace-common.c: New.
	* common/btrace-common.h: Include common-defs.h.
	(btrace_block_s): Update comment.
	(btrace_format): New.
	(btrace_format_string): New.
	(btrace_data_bts): New.
	(btrace_data): New.
	(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
	* remote.c (remote_read_btrace): Update parameters.
	* target.c (target_read_btrace): Update parameters.
	* target.h (target_read_btrace): Update parameters.
	(target_ops)<to_read_btrace>: Update parameters.
	* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
	* target-delegates.c: Regenerate.
	* target-debug (target_debug_print_struct_btrace_data_p): New.
	* nat/linux-btrace.c (linux_read_btrace): Split into this and...
	(linux_read_bts): ...this.
	* nat/linux-btrace.h (linux_read_btrace): Update parameters.

2015-02-06  Doug Evans  <dje@google.com>

	* remote-m32r-sdi.c: Include symfile.h.

2015-02-06  Doug Evans  <dje@google.com>

	* symtab.h (clear_symtab_users, deduce_language_from_filename): Move
	* symfile.h (clear_symtab_users, deduce_language_from_filename): ...
	to here.

2015-02-06  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (find_new_threads_callback): Add debug output.

2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/15678
	* breakpoint.c (map_breakpoint_numbers): Check for empty args string.
	(enable_count_command): Check args for NULL value.

2015-02-05  Doug Evans  <xdje42@gmail.com>

	* guile/scm-frame.c: Fix spelling errors in a comment.

2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/python-internal.h (Py_hash_t): Define it for Python <3.2.
	* python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
	return type.

2015-02-04  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (handle_extended_wait): Don't resume LWPs here.
	(wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
	returns true.
	(resume_stopped_resumed_lwps): Don't check whether the thread is
	marked as executing.
	(linux_nat_wait_1): Use resume_stopped_resumed_lwps.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* regset.h (struct regset): Add flags field.
	(REGSET_VARIABLE_SIZE): New value for a regset's flags field.
	* corelow.c (get_core_register_section): Add warning if the size
	exceeds the requested size and the regset does not have the
	REGSET_VARIABLE_SIZE flag set.
	* alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
	flag.
	* armbsd-tdep.c (armbsd_gregset): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
	* hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
	* m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
	* mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
	For ".reg-xstate", explicitly specify the requested section size
	via X86_XSTATE_SIZE instead of just 0 on input and
	X86_XSTATE_MAX_SIZE on output.
	* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
	Likewise.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	PR corefiles/17808:
	* gdbarch.sh (iterate_over_regset_sections_cb): Document this
	function type, particularly its SIZE parameter.
	* gdbarch.h: Regenerate.
	* amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
	actual against required size using ">=" instead of "==".
	(amd64_collect_fpregset): Likewise.
	* i386-tdep.c (i386_supply_gregset): Likewise.
	(i386_collect_gregset): Likewise.
	(i386_supply_fpregset): Likewise.
	(i386_collect_fpregset): Likewise.
	* mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
	(mips_fill_gregset_wrapper): Likewise.
	(mips_supply_fpregset_wrapper): Likewise.
	(mips_fill_fpregset_wrapper): Likewise.
	(mips64_supply_gregset_wrapper): Likewise.
	(mips64_fill_gregset_wrapper): Likewise.
	(mips64_supply_fpregset_wrapper): Likewise.
	(mips64_fill_fpregset_wrapper): Likewise.
	* mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
	(am33_supply_fpregset_method): Likewise.
	(am33_collect_gregset_method): Likewise.
	(am33_collect_fpregset_method): Likewise.

2015-02-04  Doug Evans  <dje@google.com>
	    Pedro Alves  <palves@redhat.com>
	    Eli Zaretskii  <eliz@gnu.org>

	PR tui/17810
	* tui/tui-command.c (tui_refresh_cmd_win): New function.
	* tui/tui-command.c (tui_refresh_cmd_win): Declare.
	* tui/tui-file.c: #include tui/tui-command.h.
	(tui_file_fputs): Refresh command window if stream is not gdb_stdout.
	(tui_file_flush): Refresh command window if stream is gdb_stdout.
	* tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.

2015-02-04  Pedro Alves  <palves@redhat.com>

	Fix build breakage.
	* event-loop.c (gdb_do_one_event): Add default switch case.

2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Filter out inferior gcc option -fpreprocessed.
	* compile/compile.c (filter_args): New function.
	(get_args): Use it.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* event-loop.c: Don't declare nor define a queue type for
	gdb_event_p.
	(event_queue): Delete.
	(create_event, create_file_event, gdb_event_xfree)
	(initialize_event_loop, process_event): Delete.
	(gdb_do_one_event): Return as soon as one event is handled.
	(handle_file_event): Change prototype.  Used the passed in
	file_handler pointer and ready_mask instead of looping over all
	file handlers.
	(gdb_wait_for_event): Update the poll/select timeouts before
	blocking.  Run event handlers directly instead of queueing events.
	Return as soon as one event is handled.
	(struct async_event_handler_data): Delete.
	(invoke_async_event_handler): Delete.
	(check_async_event_handlers): Change return type to int.  Run
	event handlers directly instead of queueing events.  Return as
	soon as one event is handled.
	(handle_timer_event): Delete.
	(update_wait_timeout): New function, factored out from
	poll_timers.
	(poll_timers): Reimplement.
	* event-loop.h (initialize_event_loop): Delete declaration.
	* top.c (gdb_init): Don't call initialize_event_loop.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* event-loop.c (clear_async_event_handler): New function.
	* event-loop.h (clear_async_event_handler): New declaration.
	* record-btrace.c (record_btrace_async): New function.
	(init_record_btrace_ops): Install record_btrace_async.
	* record-full.c (record_full_async): New function.
	(record_full_resume): Don't mark the async event source here.
	(init_record_full_ops): Install record_full_async.
	(record_full_core_resume): Don't mark the async event source here.
	(init_record_full_core_ops): Install record_full_async.
	* remote.c (remote_async): Mark and clear the async stop reply
	queue event-loop token as appropriate.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
	target_is_async_p instead of target_can_async.
	(linux_nat_wait): Use target_is_async_p instead of
	target_can_async.  Don't enable async here.
	* remote.c (interrupt_query, remote_wait, putpkt_binary): Use
	target_is_async_p instead of target_can_async.

2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.h (lang_varobj_ops): Mention which return values need
	to be freed.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	* dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	PR gdb/17856:
	* ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
	results found in the cache.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	PR gdb/17854:
	* ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
	when allocating a new one.

2015-02-01  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Remove myself.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* dwarf2read.c (process_structure_scope): Update setting of
	TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
	* gdbtypes.c (internal_type_vptr_fieldno): New function.
	(set_type_vptr_fieldno): New function.
	(internal_type_vptr_basetype): New function.
	(set_type_vptr_basetype): New function.
	(get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
	TYPE_VPTR_BASETYPE.
	(allocate_cplus_struct_type): Initialize vptr_fieldno.
	(recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
	(print_cplus_stuff): ... moved here.
	(copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
	* gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
	moved to ...
	(struct cplus_struct_type): ... here.  All uses updated.
	(TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
	(internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
	(internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
	* stabsread.c (read_tilde_fields): Update setting of
	TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* cp-valprint.c (cp_find_class_member): Rename parameter domain_p
	to self_p.
	(cp_print_class_member): Rename local domain to self_type.
	* dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
	domain_type to self_type.
	(set_die_type) <need_gnat_info>: Handle
	TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
	* gdb-gdb.py (StructMainTypePrettyPrinter): Handle
	TYPE_SPECIFIC_SELF_TYPE.
	* gdbtypes.c (internal_type_self_type): New function.
	(set_type_self_type): New function.
	(smash_to_memberptr_type): Rename parameter domain to self_type.
	Update setting of TYPE_SELF_TYPE.
	(smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
	(smash_to_method_type): Rename parameter domain to self_type.
	Update setting of TYPE_SELF_TYPE.
	(check_stub_method): Call smash_to_method_type.
	(recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
	(copy_type_recursive): Ditto.
	* gdbtypes.h (enum type_specific_kind): New value
	TYPE_SPECIFIC_SELF_TYPE.
	(struct main_type) <type_specific>: New member self_type.
	(struct cplus_struct_type) <fn_field.type>: Update comment.
	(TYPE_SELF_TYPE): Rewrite.
	(internal_type_self_type, set_type_self_type): Declare.
	* gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
	self_type.
	(gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
	* m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
	TYPE_TARGET_TYPE.
	* stabsread.c (read_member_functions): Mark methods with
	TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
	TYPE_SELF_TYPE.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
	All uses updated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
	or unions.  Return zero if union.
	(gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
	(gnuv3_rtti_type): Pass already-check_typedef'd value to
	gnuv3_get_vtable.
	(compute_vtable_size): Assert only passed structs.
	(gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
	kinds.

2015-01-31  Gary Benson <gbenson@redhat.com>
	    Doug Evans  <dje@google.com>

	PR cli/9007
	PR cli/11920
	PR cli/15548
	* cli/cli-cmds.c (complete_command): Notify user if max-completions
	reached.
	* common/common-exceptions.h (enum errors)
	<MAX_COMPLETIONS_REACHED_ERROR>: New value.
	* completer.h (get_max_completions_reached_message): New declaration.
	(max_completions): Likewise.
	(completion_tracker_t): New typedef.
	(new_completion_tracker): New declaration.
	(make_cleanup_free_completion_tracker): Likewise.
	(maybe_add_completion_enum): New enum.
	(maybe_add_completion): New declaration.
	(throw_max_completions_reached_error): Likewise.
	* completer.c (max_completions): New global variable.
	(new_completion_tracker): New function.
	(free_completion_tracker): Likewise.
	(make_cleanup_free_completion_tracker): Likewise.
	(maybe_add_completions): Likewise.
	(throw_max_completions_reached_error): Likewise.
	(complete_line): Remove duplicates and limit result to max_completions
	entries.
	(get_max_completions_reached_message): New function.
	(gdb_display_match_list): Handle max_completions.
	(_initialize_completer): New declaration and function.
	* symtab.c: Include completer.h.
	(completion_tracker): New static variable.
	(completion_list_add_name): Call maybe_add_completion.
	(default_make_symbol_completion_list_break_on_1): Renamed from
	default_make_symbol_completion_list_break_on.  Maintain
	completion_tracker across calls to completion_list_add_name.
	(default_make_symbol_completion_list_break_on): New function.
	* top.c (init_main): Set rl_completion_display_matches_hook.
	* tui/tui-io.c: Include completer.h.
	(tui_old_rl_display_matches_hook): New static global.
	(tui_rl_display_match_list): Notify user if max-completions reached.
	(tui_setup_io): Save/restore rl_completion_display_matches_hook.
	* NEWS (New Options): Mention set/show max-completions.

2015-01-31  Gary Benson  <gbenson@redhat.com>

	* symtab.c (struct add_name_data) <code>: New field.
	Updated comments.
	(add_symtab_completions): New function.
	(symtab_expansion_callback): Likewise.
	(default_make_symbol_completion_list_break_on): Set datum.code.
	Move minimal symbol scan before calling expand_symtabs_matching.
	Scan known primary symtabs for externs and statics before calling
	expand_symtabs_matching.  Pass symtab_expansion_callback as
	expansion_notify argument to expand_symtabs_matching.  Do not scan
	primary symtabs for externs and statics after calling
	expand_symtabs_matching.

2015-01-31  Gary Benson  <gbenson@redhat.com>

	* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
	(struct quick_symbol_functions) <expand_symtabs_matching>:
	New argument expansion_notify.  All uses updated.
	(expand_symtabs_matching): New argument expansion_notify.
	All uses updated.
	* symfile-debug.c (debug_qf_expand_symtabs_matching):
	Also print expansion notify.
	* symtab.c (expand_symtabs_matching_via_partial): Call
	expansion_notify whenever a partial symbol table is expanded.
	* dwarf2read.c (dw2_expand_symtabs_matching): Call
	expansion_notify whenever a symbol table is instantiated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* cli-out.c: #include completer.h, readline/readline.h.
	(cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
	(cli_mld_flush, cld_mld_erase_entire_line): Ditto.
	(cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
	* cli-out.h (cli_display_match_list): Declare.
	* completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
	(ELLIPSIS_LEN): Ditto.
	(gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
	(gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
	(gdb_fnprint, gdb_print_filename): Ditto.
	(gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
	(gdb_display_match_list): Ditto.
	* completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
	(mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
	(mld_beep_ftype, mld_read_key_ftype): Ditto.
	(match_list_displayer): New struct.
	(gdb_display_match_list): Declare.
	* top.c (init_main): Set rl_completion_display_matches_hook.
	* tui/tui-io.c: #include completer.h.
	(printable_part, PUTX, print_filename, get_y_or_n): Delete.
	(tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
	(tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
	(tui_mld_getc, tui_mld_read_key): Ditto.
	(tui_rl_display_match_list): Rewrite.
	(tui_handle_resize_during_io): New arg for_completion.  All callers
	updated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	Add symbol lookup cache.
	* NEWS: Document new options and commands.
	* symtab.c (symbol_cache_key): New static global.
	(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
	(SYMBOL_LOOKUP_FAILED): New macro.
	(symbol_cache_slot_state): New enum.
	(block_symbol_cache): New struct.
	(symbol_cache): New struct.
	(new_symbol_cache_size, symbol_cache_size): New static globals.
	(hash_symbol_entry, eq_symbol_entry): New functions.
	(symbol_cache_byte_size, resize_symbol_cache): New functions.
	(make_symbol_cache, free_symbol_cache): New functions.
	(get_symbol_cache, symbol_cache_cleanup): New function.
	(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
	(symbol_cache_lookup, symbol_cache_clear_slot): New function.
	(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
	(symbol_cache_flush, symbol_cache_dump): New functions.
	(maintenance_print_symbol_cache): New function.
	(maintenance_flush_symbol_cache): New function.
	(symbol_cache_stats): New function.
	(maintenance_print_symbol_cache_statistics): New function.
	(symtab_new_objfile_observer): New function.
	(symtab_free_objfile_observer): New function.
	(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
	(_initialize_symtab): Init symbol_cache_key.  New parameter
	maint symbol-cache-size.  New maint commands print symbol-cache,
	print symbol-cache-statistics, flush-symbol-cache.
	Install new_objfile, free_objfile observers.

2015-01-31  Joel Brobecker  <brobecker@adacore.com>

	PR symtab/17855
	* symfile.c (clear_symtab_users): Move call to breakpoint_re_set
	to end.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* NEWS: Mention inlined scripts in .debug_gdb_scripts section.
	* auto-load.c: #include ctype.h.
	(struct auto_load_pspace_info): Replace member loaded_scripts with
	new members loaded_script_files, loaded_script_texts.
	(auto_load_pspace_data_cleanup): Update.
	(init_loaded_scripts_info): Update.
	(get_auto_load_pspace_data_for_loading): Update.
	(maybe_add_script_file): Renamed from maybe_add_script.  All callers
	updated.
	(maybe_add_script_text): New function.
	(clear_section_scripts): Update.
	(source_script_file, execute_script_contents): New functions.
	(source_section_scripts): Add support for
	SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
	(print_scripts): New function.
	(auto_load_info_scripts): Also print inlined scripts.
	(maybe_print_unsupported_script_warning): Renamed from
	unsupported_script_warning_print.  All callers updated.
	(maybe_print_script_not_found_warning): Renamed from
	script_not_found_warning_print.  All callers updated.
	* extension-priv.h (struct extension_language_script_ops): New member
	objfile_script_executor.
	* extension.c (ext_lang_objfile_script_executor): New function.
	* extension.h (objfile_script_executor_func): New typedef.
	(ext_lang_objfile_script_executor): Declare.
	* guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
	* guile/guile.c (guile_extension_script_ops): Update.
	* guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
	* python/python.c (python_extension_script_ops): Update.
	(gdbpy_execute_objfile_script): New function.

2015-01-31  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-io.c (tui_expand_tabs): New function.
	(tui_puts, tui_redisplay_readline): Expand TABs into the
	appropriate number of spaces.
	* tui/tui-regs.c: Include tui-io.h.
	(tui_register_format): Call tui_expand_tabs to expand TABs into
	the appropriate number of spaces.
	* tui/tui-io.h: Add prototype for tui_expand_tabs.

2015-01-30  Doug Evans  <dje@google.com>

	* NEWS: "info source" command now display producer string if present.
	* source.c (source_info): Print producer string if present.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (varobj_delete): Fix comment.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (create_child): Modify comment.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* ada-varobj.c (ada_number_of_children): Constify struct varobj *
	parameter.
	(ada_name_of_variable): Same.
	(ada_path_expr_of_child): Same.
	(ada_value_of_variable): Same.
	(ada_value_is_changeable_p): Same.
	(ada_value_has_mutated): Same.
	* c-varobj.c (varobj_is_anonymous_child): Same.
	(c_is_path_expr_parent): Same.
	(c_number_of_children): Same.
	(c_name_of_variable): Same.
	(c_path_expr_of_child): Same.
	(get_type): Same.
	(c_value_of_variable): Same.
	(cplus_number_of_children): Same.
	(cplus_name_of_variable): Same.
	(cplus_path_expr_of_child): Same.
	(cplus_value_of_variable): Same.
	* jv-varobj.c (java_number_of_children): Same.
	(java_name_of_variable): Same.
	(java_path_expr_of_child): Same.
	(java_value_of_variable): Same.
	* varobj.c (number_of_children): Same.
	(name_of_variable): Same.
	(is_root_p): Same.
	(varobj_ensure_python_env): Same.
	(varobj_get_objname): Same.
	(varobj_get_expression): Same.
	(varobj_get_display_format): Same.
	(varobj_get_display_hint): Same.
	(varobj_has_more): Same.
	(varobj_get_thread_id): Same.
	(varobj_get_frozen): Same.
	(dynamic_varobj_has_child_method): Same.
	(varobj_get_gdb_type): Same.
	(is_path_expr_parent): Same.
	(varobj_default_is_path_expr_parent): Same.
	(varobj_get_language): Same.
	(varobj_get_attributes): Same.
	(varobj_is_dynamic_p): Same.
	(varobj_get_child_range): Same.
	(varobj_value_has_mutated): Same.
	(varobj_get_value_type): Same.
	(number_of_children): Same.
	(name_of_variable): Same.
	(check_scope): Same.
	(varobj_editable_p): Same.
	(varobj_value_is_changeable_p): Same.
	(varobj_floating_p): Same.
	(varobj_default_value_is_changeable_p): Same.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (varobj_get_path_expr): Set var->path_expr.
	* c-varobj.c (c_path_expr_of_child): Set local var instead of
	child->path_expr.
	(cplus_path_expr_of_child): Same.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* mi-cmd-var.c (print_varobj): Free varobj_get_expression
	result.
	(mi_cmd_var_info_expression): Same.
	* varobj.c (varobj_get_expression): Mention in the comment that
	the result must by freed by the caller.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
	varobj_get_type.
	(varobj_update_one): Same.
	* varobj.c (update_type_if_necessary): Free curr_type_str and
	new_type_str.
	(varobj_get_type): Specify in comment that the result needs to be
	freed by the caller.

2015-01-29  Doug Evans  <dje@google.com>

	PR symtab/17890
	* dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.

2015-01-25  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (checkproducer): Call producer_is_gcc.
	* utils.c (producer_is_gcc_ge_4): Likewise.
	(producer_is_gcc): New function.
	* utils.h (producer_is_gcc): New declaration.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
	kind.
	* gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
	parameter by "addr_stack" parameter.
	(resolve_dynamic_range): Replace "addr" parameter by
	"stack_addr" parameter.  Update function documentation.
	Update code accordingly.
	(resolve_dynamic_array, resolve_dynamic_union)
	(resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
	(resolve_dynamic_type): Update code, following the changes made
	to resolve_dynamic_type_internal's interface.
	* dwarf2loc.h (struct property_addr_info): New.
	(dwarf2_evaluate_property): Replace "address" parameter
	by "addr_stack" parameter.  Adjust function documentation.
	(struct dwarf2_offset_baton): New.
	(struct dwarf2_property_baton): Update documentation of
	field "referenced_type" to be more general. New field
	"offset_info" in union data field.
	* dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
	parameter by "addr_stack" parameter.  Adjust code accordingly.
	Add support for PROP_ADDR_OFFSET properties.
	* dwarf2read.c (attr_to_dynamic_prop): Add support for
	DW_AT_data_member_location attributes as well.  Use case
	statements instead of if/else condition.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* ada-varobj.c (ada_varobj_get_array_number_of_children):
	Return zero if PARENT_VALUE is NULL and parent_type's
	range type is dynamic.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
	nonzero if the type's subtype is dynamic.
	(resolve_dynamic_range): Also resolve the range's subtype.

2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)

	Pushed by Joel Brobecker  <brobecker@adacore.com>.
	* symfile.c (unmap_overlay_command): Initialize sec to NULL.

2015-01-27  Doug Evans  <dje@google.com>

	* NEWS: Mention gdb.Objfile.username.
	* python/py-objfile.c (objfpy_get_username): New function.
	(objfile_getset): Add "username".

2015-01-24  Mark Wielaard  <mjw@redhat.com>

	* stack.c (return_command): Markup warning message with _.

2015-01-24  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.

2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix 100x slowdown regression on DWZ files.
	* dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
	(struct line_header): Add offset and offset_in_dwz.
	(dwarf_decode_lines): Add parameter decode_mapping to the declaration.
	(free_line_header_voidp): New declaration.
	(line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
	functions.
	(dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
	(handle_DW_AT_stmt_list): Use line_header_hash.
	(free_line_header_voidp): New function.
	(dwarf_decode_line_header): Initialize offset and offset_in_dwz.
	(dwarf_decode_lines): New parameter decode_mapping, use it.
	(dwarf2_free_objfile): Free line_header_hash.

2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/17416
	* valops.c (value_rtti_indirect_type): Catch exception thrown by
	value_ind.

2015-01-15  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
	DW_AT_noreturn.
	* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
	calling_convention an 8 bit bit field.
	(TYPE_NO_RETURN): New macro.
	* infcmd.c (finish_command): Query if function does not return
	normally.
	* stack.c (return_command): Likewise.

2015-01-23  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_is_async_p): New macro.
	(linux_nat_is_async_p):
	(linux_nat_terminal_inferior): Check whether the target can async
	instead of whether it is already async.
	(linux_nat_terminal_ours): Don't check whether the target is
	async.
	(linux_async_pipe): Use linux_is_async_p.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* NEWS (Changes since GDB 7.9): Add 'thread apply all' option
	'-ascending'.
	* thread.c (tp_array_compar_ascending, tp_array_compar): New.
	(thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
	Sort tp_array using tp_array_compar.
	(_initialize_thread): Extend thread_apply_all_command help.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* corelow.c (core_open): Call also thread_command.
	* gdbthread.h (thread_command): New prototype moved from ...
	* thread.c (thread_command): ... here.
	(thread_command): Make it global.

2015-01-22  Pedro Alves  <palves@redhat.com>

	* configure.ac [*mingw32*]: Check $curses_found instead of
	$prefer_curses.
	* configure: Regenerate.
	* windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
	HAVE_NCURSES_NCURSES_H checks.

2015-01-22  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
	fails with the 1st arg NULL, try again with "unknown".  Don't test
	the "cup" capability: it isn't supported by the Windows port of
	ncurses, but the Windows console driver is still capable of
	supporting TUI.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile.c (_initialize_compile): Use -fPIE for compile_args.

2015-01-22  Eli Zaretskii  <eliz@gnu.org>

	* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
	(ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
	reason that "make TAGS" is broken.

2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>

	* hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
	and check additional store instructions.

2015-01-21  Wei-cheng Wang  <cole945@gmail.com>

	* MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".

2015-01-21  Wei-cheng Wang  <cole945@gmail.com>

	* ppc-linux-tdep.c (ppc_skip_trampoline_code,
	ppc_canonicalize_syscall, ppc_linux_syscall_record,
	ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
	* ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
	* rs6000-tdep.c (rs6000_epilogue_frame_cache,
	rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
	rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
	ppc_process_record_op19, ppc_process_record_op31,
	ppc_process_record_op59, ppc_process_record_op60,
	ppc_process_record_op63): Likewise.

2015-01-20  Joel Brobecker  <brobecker@adacore.com>

	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
	(linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
	strerror.

2015-01-20  Wei-cheng Wang  <cole945@gmail.com>

	* rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
	ppc_process_record_op31, ppc_process_record_op59,
	ppc_process_record_op60, ppc_process_record_op63,
	ppc_process_record): Fix -Wformat warning.
	* rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
	Remove unused variables.

2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>

	* MAINTAINERS (Write After Approval): Add "Chen Gang".

2015-01-19  Eli Zaretskii  <eliz@gnu.org>

	* configure.ac [*mingw32*]: Only add windows-termcap.o to
	CONFIG_OBS if not building with a curses library.
	* configure: Regenerate.

	* windows-termcap.c: Include defs.h.  Make the whole body empty if
	either one of HAVE_CURSES_H or HAVE_NCURSES_H or
	HAVE_NCURSES_NCURSES_H is defined.

2015-01-19  Joel Brobecker  <brobecker@adacore.com>

	* rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
	from end of line to start of next line.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>

	* ppc-linux-tdep.c (ppc_skip_trampoline_code):
	Scan PLT stub backward for reverse debugging.
	* ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
	    Ulrich Weigand  <uweigand@de.ibm.com>

	* configure.tgt (powerpc*-*-linux): Add linux-record.o to
	gdb_target_obs.
	(ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
	record.
	(ppc_canonicalize_syscall, ppc_linux_syscall_record,
	ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
	(ppc_linux_init_abi): Set process_record, process_record_signal.
	* ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
	ppc_linux_record_tdep to gdbarch_tdep.
	(ppc_process_record): New declaration.
	* rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
	ppc_process_record_op19, ppc_process_record_op31,
	ppc_process_record_op59, ppc_process_record_op60,
	ppc_process_record_op63, ppc_process_record): New functions.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>

	* rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
	rs6000_in_function_epilogue_frame_p and add an argument
	for frame_info.
	(rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
	rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
	New functions.
	(rs6000_epilogue_frame_unwind): New.
	(rs6000_gdbarch_init): Append epilogue unwinder.

2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>

	* nat/linux-personality.c: Replace "#ifndef
	HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
	!HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
	systems.

2015-01-16  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
	functions.
	(_initialize_tui_win) <border-kind, border-mode>:
	<active-border-mode>: Use tui_set_var_cmd as the "set" function.
	(tui_set_tab_width_command): Fix the commentary.

	* tui/tui-win.h: Add prototype for tui_rehighlight_all.

	* tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
	Doc fix.
	(tui_set_tab_width_command): Delete and recreate the source and
	the disassembly windows, to show the effect of the changed tab
	size immediately.

	* tui/tui-data.h (LINE_PREFIX): Make shorter
	(MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
	"Thread NNNNN.XXXX" thread ID notation on Windows.

2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix gcc-5 compilation.
	* hppa-tdep.c (inst_saves_gr): Fix parentheses typo.

2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
	(linux-personality.o): New rule.
	* common/common-defs.h: Include <stdint.h>.
	* config/aarch64/linux.mh (NATDEPFILES): Include
	linux-personality.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/s390/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.
	* defs.h: Remove #include <stdint.h> (moved to
	common/common-defs.h).
	* linux-nat.c: Include nat/linux-personality.h.  Remove #include
	<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
	nat/linux-personality.c).
	(linux_nat_create_inferior): Remove code to disable address space
	randomization (moved to nat/linux-personality.c).  Create cleanup
	to disable address space randomization.
	* nat/linux-personality.c: New file.
	* nat/linux-personality.h: Likewise.

2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
	common/posix-strerror.c.
	(posix-strerror.o): New rule.
	(mingw-strerror.o): Likewise.
	* common/common-utils.h (safe_strerror): Move prototype to here,
	from utils.h.
	* common/common.host: New file.
	* common/mingw-strerror.c: Likewise.
	* common/posix-strerror.c: Likewise.
	* configure: Regenerated.
	* configure.ac: Source common/common.host.  Add variable
	common_host_obs to gdb_host_obs.
	* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
	gdb/common/posix-strerror.c when warning about the use of
	strerror.
	* mingw-hdep.c (safe_strerror): Remove definition; move it to
	common/mingw-strerror.c.
	* posix-hdep.c (safe_strerror): Remove definition; move it to
	common/posix-hdep.c.
	* utils.h (safe_strerror): Remove prototype; move to
	common/common-utils.h.

2015-01-15  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.8.2 released.

2015-01-15  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
	___XA type if the array has already been fixed.

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* Makefile.in (ppc-linux.o): New rule.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
	* configure.ac: AC_CHECK_FUNCS(getauxval).
	* config.in: Re-generated.
	* configure: Re-generated.
	* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
	Declare.
	* nat/ppc-linux.c: New file.
	* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
	Call ppc64_64bit_inferior_p.

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
	nat/ppc-linux.h.
	(PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
	(PPC_FEATURE_HAS_DFP): Likewise.
	(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
	(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
	(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
	Include "nat/ppc-linux.h".
	* nat/ppc-linux.h: New file.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.

2015-01-14  Pedro Alves  <palves@redhat.com>

	PR gdb/17525
	* breakpoint.c: Include "interps.h".
	(bpstat_do_actions_1): Also check whether the interpreter is
	async.

2015-01-14  Pedro Alves  <palves@redhat.com>

	PR cli/17828
	* infrun.c (reinstall_readline_callback_handler_cleanup): Don't
	reinstall if the interpreter is sync.

2015-01-13  Doug Evans  <dje@google.com>

	* objfiles.c (objfile_filename): New function.
	* objfiles.h (objfile_filename): Declare it.
	(objfile_name): Add function comment.
	* python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
	bfd file name (which may be realpath'd), and the original name.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
	* version.in: Bump version to 7.9.50.DATE-cvs.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* nat/linux-procfs.c (linux_proc_attach_tgid_threads):
	Remove trailing new-line in argument of call to warning.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
	new-line in argument of call to "warning".

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
	in static block, then try searching for primitive types.

2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>

	* top.h (gdb_add_history): Declare.
	* top.c (command_count): New variable.
	(gdb_add_history): New function.
	(gdb_safe_append_history): New static function.
	(quit_force): Call it.
	(command_line_input): Use gdb_add_history instead of
	add_history.
	* event-top.c (command_line_handler): Likewise.

2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)

	PR gdb/17046
	* darwin-nat.c: Replace <machine/setjmp.h> #include by
	<setjmp.h> #include.

2015-01-11  Doug Evans  <xdje42@gmail.com>

	* dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.

2015-01-11  Doug Evans  <xdje42@gmail.com>

	PR gdb/15830
	* NEWS: The "maint demangle" command is renamed as "demangle".
	* demangle.c: #include cli/cli-utils.h, language.h.
	(demangle_command): New function.
	(_initialize_demangle): Add new command "demangle".
	* maint.c (maintenance_demangle): Stub out.
	(_initialize_maint_cmds): Update help text for "maint demangle",
	and mark as deprecated.

2015-01-11  Mark Kettenis  <kettenis@gnu.org>

	* inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
	inferior_thread is a function.

2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>

	* Makefile.in (.y.c): Don't munge yacc's #line
	directives.

2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>

	* utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
	to prompt for input.
	* tui/tui-hooks.c (tui_query_hook): Remove.
	(tui_install_hooks): Don't set deprecated_query_hook.
	* tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
	height calculation.  Always update the command window's cur_line.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (hardware_breakpoint_inserted_here_p): New
	function.
	* breakpoint.h (hardware_breakpoint_inserted_here_p): New
	declaration.
	* linux-nat.c (linux_nat_status_is_event): Move higher up in file.
	(linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
	stop_reason.
	(check_stopped_by_watchpoint): New function.
	(save_sigtrap): Reimplement.
	(linux_nat_stopped_by_watchpoint): Adjust.
	(linux_nat_lp_status_is_event): Delete.
	(stop_wait_callback): Only call save_sigtrap after storing the
	pending status.
	(status_callback): If the thread had been stopped for a breakpoint
	that has since been removed, discard the event and resume the LWP.
	(count_events_callback, select_event_lwp_callback): Use
	lwp_status_pending_p instead of linux_nat_lp_status_is_event.
	(cancel_breakpoint): Rename to ...
	(check_stopped_by_breakpoint): ... this.  Record whether the LWP
	stopped for a software breakpoint or hardware breakpoint.
	(select_event_lwp): Only give preference to the stepping LWP in
	all-stop mode.  Adjust comments.
	(stop_and_resume_callback): Remove references to new_pending_p.
	(linux_nat_filter_event): Likewise.  Leave exit events of the
	leader thread pending here.  Handle signal short circuiting here.
	Only call save_sigtrap after storing the pending waitstatus.
	(linux_nat_wait_1): Remove 'retry' label.  Remove references to
	new_pending.  Don't handle leaving events the caller is not
	interested in pending here, nor handle signal short-circuiting
	here.  Also give equal priority to all LWPs that have had events
	in non-stop mode.  If reporting a software breakpoint event,
	unadjust the LWP's PC.
	* linux-nat.h (enum lwp_stop_reason): New.
	(struct lwp_info) <stop_pc>: New field.
	(struct lwp_info) <stopped_by_watchpoint>: Delete field.
	(struct lwp_info) <stop_reason>: New field.
	* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
	Set the LWP's 'resumed' flag.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_resume_one_lwp): New function.
	(resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
	(linux_nat_resume): Use lwp_status_pending_p and
	linux_resume_one_lwp.
	(linux_handle_syscall_trap): Use linux_resume_one_lwp.
	(linux_handle_extended_wait): Use linux_resume_one_lwp.
	(status_callback, running_callback): Use lwp_status_pending_p.
	(lwp_status_pending_p): New function.
	(stop_and_resume_callback): Use lwp_status_pending_p.
	(linux_nat_filter_event): Use linux_resume_one_lwp.
	(linux_nat_wait_1): Always use status_callback to look for an LWP
	with a pending status.  Use linux_resume_one_lwp.
	(resume_stopped_resumed_lwps): Use lwp_status_pending_p and
	linux_resume_one_lwp.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (bp_location_inserted_here_p): New function,
	factored out from ...
	(breakpoint_inserted_here_p): ... here.  Use
	ALL_BP_LOCATIONS_AT_ADDR.
	(software_breakpoint_inserted_here_p): Use
	bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.

2014-01-09  Pedro Alves  <palves@redhat.com>

	Skip enabling event reporting if the kernel supports
	PTRACE_EVENT_CLONE.
	* linux-thread-db.c: Include "nat/linux-ptrace.h".
	(thread_db_use_events): New function.
	(try_thread_db_load_1): Check thread_db_use_events before enabling
	event reporting.
	(update_thread_state): New function.
	(attach_thread): Use it.  Check thread_db_use_events before
	enabling event reporting.
	(thread_db_detach): Check thread_db_use_events before disabling
	event reporting.
	(find_new_threads_callback): Check thread_db_use_events before
	enabling event reporting.  Update the thread's state if not using
	libthread_db events.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
	about to wait for is > 0.
	* linux-thread-db.c (find_new_threads_callback): Ignore thread if
	the kernel thread ID is -1.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (attach_proc_task_lwp_callback): New function.
	(linux_nat_attach): Use linux_proc_attach_tgid_threads.
	(wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
	ptrace option flags.
	* linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
	field.
	* nat/linux-procfs.c: Include <dirent.h>.
	(linux_proc_get_int): New parameter "warn".  Handle it.
	(linux_proc_get_tgid): Adjust.
	(linux_proc_get_tracerpid): Rename to ...
	(linux_proc_get_tracerpid_nowarn): ... this.
	(linux_proc_pid_get_state): New function, factored out from
	(linux_proc_pid_has_state): ... this.  Add new parameter "warn"
	and handle it.
	(linux_proc_pid_is_gone): New function.
	(linux_proc_pid_is_stopped): Adjust.
	(linux_proc_pid_is_zombie_maybe_warn)
	(linux_proc_pid_is_zombie_nowarn): New functions.
	(linux_proc_pid_is_zombie): Use
	linux_proc_pid_is_zombie_maybe_warn.
	(linux_proc_attach_tgid_threads): New function.
	* nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
	(linux_proc_get_tracerpid): Rename to ...
	(linux_proc_get_tracerpid_nowarn): ... this, and update comment.
	(linux_proc_pid_is_gone): New declaration.
	(linux_proc_pid_is_zombie): Update comment.
	(linux_proc_pid_is_zombie_nowarn): New declaration.
	(linux_proc_attach_lwp_func): New typedef.
	(linux_proc_attach_tgid_threads): New declaration.
	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
	use nowarn functions.
	(linux_ptrace_attach_fail_reason_string): Move here from
	gdbserver/linux-low.c and rename.
	(ptrace_supports_feature): If the current ptrace options are not
	known yet, check them now, instead of asserting.
	* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
	Declare.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (thread_db_find_new_threads_silently)
	(try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
	(find_new_threads_once): Print debug output on gdb_stdlog.

2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* compile/compile.c: Include "gdb_wait.h".
	(do_rmdir): Check return value, and free 'zap'.

2015-01-08  Pedro Alves  <palves@redhat.com>
	    Yao Qi  <yao@codesourcery.com>

	* dwarf2loc.c (indirect_pieced_value): Don't call
	gdb_sign_extend.  Call extract_signed_integer instead.
	* utils.c (gdb_sign_extend): Remove.
	* utils.h (gdb_sign_extend): Remove declaration.

2015-01-07  Pierre Muller  <muller@sourceware.org>

	PR symtab/17811
	* stabsread.c (define_symbol): Set language for C++ special symbols.

2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>

	* inflow.c (initial_gdb_ttystate): Tweak comment.

2015-01-07  Joel Brobecker  <brobecker@adacore.com>

	* inflow.c (set_initial_gdb_ttystate): Add empty line after
	comment documenting function.

2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>

	* terminal.h (set_initial_gdb_ttystate): Declare.
	* inflow.c (initial_gdb_ttystate): New static variable.
	(set_initial_gdb_ttystate): New setter.
	(child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
	instead of our current terminal state.
	* top.c (gdb_init): Call set_initial_gdb_ttystate.

2015-01-07  Joel Brobecker  <brobecker@adacore.com>

	* guile/scm-type.c (tyscm_array_1): Add comment.
	* python/py-type.c (typy_array_1): Add comment.

2015-01-06  Joel Brobecker  <brobecker@adacore.com>

	* guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
	error if N2 is equal to N1 - 1.

2015-01-06  Joel Brobecker  <brobecker@adacore.com>

	* python/py-type.c (typy_array_1): Do not raise negative-length
	exception if N2 is equal to N1 - 1.

2015-01-03  Doug Evans  <xdje42@gmail.com>

	* c-exp.y: Whitespace cleanup.
	(classify_inner_name): Remove extra ;.

2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
	offset signed.

2015-01-02  Doug Evans  <dje@google.com>

	* dwarf2read.c (setup_type_unit_groups): Remove outdated comment.

2015-01-02  Doug Evans  <dje@google.com>

	* symtab.h (struct symbol): Fix typo in comment.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update year range in copyright notice of all files.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Update copyright year to 2015.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.

For older changes see ChangeLog-2014.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: