projects / deliverable / binutils-gdb.git / blame
| Commit | Line | Data |
|---|---|---|
| 64ce06e4 PA |
1 | 2015-03-24 Pedro Alves <palves@redhat.com> |
| 2 | ||
| 3 | * breakpoint.c (until_break_command): Adjust call to proceed. | |
| 4 | * gdbthread.h (struct thread_control_state) <stepping_command>: | |
| 5 | New field. | |
| 6 | * infcall.c (run_inferior_call): Adjust call to proceed. | |
| 7 | * infcmd.c (run_command_1, proceed_thread_callback, continue_1): | |
| 8 | Adjust calls to proceed. | |
| 9 | (set_step_frame): Set the current thread's step_start_function | |
| 10 | here. | |
| 11 | (step_once): Adjust calls to proceed. | |
| 12 | (jump_command, signal_command, until_next_command) | |
| 13 | (finish_backward, finish_forward, proceed_after_attach_callback) | |
| 14 | (attach_command_post_wait): Adjust calls to proceed. | |
| 15 | * infrun.c (proceed_after_vfork_done): Adjust call to proceed. | |
| 16 | (do_target_resume): New function, factored out from ... | |
| 17 | (resume): ... here. Remove 'step' parameter. Instead, check | |
| 18 | currently_stepping to determine whether the thread should be | |
| 19 | single-stepped. | |
| 20 | (proceed): Remove 'step' parameter and don't set the thread's | |
| 21 | step_start_function here. Adjust call to 'resume'. | |
| 22 | (handle_inferior_event): Adjust calls to 'resume'. | |
| 23 | (switch_back_to_stepped_thread): Use do_target_resume instead of | |
| 24 | 'resume'. | |
| 25 | (keep_going): Adjust calls to 'resume'. | |
| 26 | * infrun.h (proceed): Remove 'step' parameter. | |
| 27 | (resume): Likewise. | |
| 28 | * windows-nat.c (do_initial_windows_stuff): Adjust call to | |
| 29 | 'resume'. | |
| 30 | * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'. | |
| 31 | ||
| 856e7dd6 PA |
32 | 2015-03-24 Pedro Alves <palves@redhat.com> |
| 33 | ||
| 34 | * gdbthread.h (struct thread_control_state) <stepping_command>: | |
| 35 | New field. | |
| 36 | * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set | |
| 37 | the thread's stepping_command field. | |
| 38 | * infrun.c (resume): Check the thread's stepping_command flag to | |
| 39 | determine which threads should be resumed. Rename 'entry_step' | |
| 40 | local to user_step. | |
| 41 | (clear_proceed_status_thread): Clear 'stepping_command'. | |
| 42 | (schedlock_applies): Change parameter type to struct thread_info | |
| 43 | pointer. Adjust. | |
| 44 | (find_thread_needs_step_over): Remove 'step' parameter. Adjust. | |
| 45 | (switch_back_to_stepped_thread): Adjust calls to | |
| 46 | 'schedlock_applies'. | |
| 47 | (_initialize_infrun): Adjust "set scheduler-locking step" help. | |
| 48 | ||
| 885eeb5b PA |
49 | 2015-03-24 Pedro Alves <palves@redhat.com> |
| 50 | ||
| 51 | * infrun.c (step_start_function): Delete and ... | |
| 52 | * gdbthread.h (struct thread_control_state) <step_start_function>: | |
| 53 | ... now a field here. | |
| 54 | * infrun.c (clear_proceed_status_thread): Clear the thread's | |
| 55 | step_start_function. | |
| 56 | (proceed, process_event_stop_test, print_stop_event): Adjust. | |
| 57 | ||
| 3333f03a PA |
58 | 2015-03-24 Pedro Alves <palves@redhat.com> |
| 59 | ||
| 60 | * infrun.c (proceed): No longer handle negative step. | |
| 61 | ||
| 369f6daa GB |
62 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 63 | ||
| 64 | * nat/x86-linux.h (x86_linux_new_thread): New declaration. | |
| 65 | (x86_linux_prepare_to_resume): Likewise. | |
| 66 | * x86-linux-nat.c (x86_linux_new_thread): | |
| 67 | Moved to nat/x86-linux.c. | |
| 68 | (x86_linux_prepare_to_resume): Likewise. | |
| 69 | * nat/x86-linux.c (x86_linux_new_thread): New function. | |
| 70 | (x86_linux_prepare_to_resume): Likewise. | |
| 71 | ||
| 8e5d4070 GB |
72 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 73 | ||
| 74 | * nat/x86-linux-dregs.h: New file. | |
| 75 | * nat/x86-linux-dregs.c: Likewise. | |
| 76 | * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h. | |
| 77 | (x86-linux-dregs.o): New rule. | |
| 78 | * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o. | |
| 79 | * config/i386/linux64.mh (NATDEPFILES): Likewise. | |
| 80 | * x86-linux-nat.c: Include nat/x86-linux-dregs.h. | |
| 81 | (u_debugreg_offset): Moved to nat/x86-linux-dregs.c. | |
| 82 | (x86_linux_dr_get): Likewise. | |
| 83 | (x86_linux_dr_set): Likewise. | |
| 84 | (x86_linux_dr_get_addr): Likewise. | |
| 85 | (x86_linux_dr_get_control): Likewise. | |
| 86 | (x86_linux_dr_get_status): Likewise. | |
| 87 | (update_debug_registers_callback): Likewise. | |
| 88 | (x86_linux_dr_set_control): Likewise. | |
| 89 | (x86_linux_dr_set_addr): Likewise. | |
| 90 | (x86_linux_update_debug_registers): Likewise. | |
| 91 | ||
| 2b95d440 GB |
92 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 93 | ||
| 94 | * x86-linux-nat.c (x86_linux_update_debug_registers): | |
| 95 | New function, factored out from... | |
| 96 | (x86_linux_prepare_to_resume): ...this. | |
| 97 | ||
| 14b0bc68 GB |
98 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 99 | ||
| 100 | * x86-linux-nat.c (x86_linux_dr_get): Update comments. | |
| 101 | (x86_linux_dr_set): Likewise. | |
| 102 | (x86_linux_dr_get_addr): Likewise. | |
| 103 | (x86_linux_dr_get_control): Likewise. | |
| 104 | (x86_linux_dr_get_status): Likewise. | |
| 105 | (update_debug_registers_callback): Likewise. | |
| 106 | (x86_linux_dr_set_control): Likewise. | |
| 107 | (x86_linux_dr_set_addr): Likewise. | |
| 108 | (x86_linux_prepare_to_resume): Likewise. | |
| 109 | (x86_linux_new_thread): Likewise. | |
| 110 | ||
| 5dfe6ca8 GB |
111 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 112 | ||
| 113 | * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion. | |
| 114 | (x86_linux_new_thread): Rename argument. | |
| 115 | ||
| 4b134ca1 GB |
116 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 117 | ||
| 118 | * nat/x86-linux.h: New file. | |
| 119 | * nat/x86-linux.c: Likewise. | |
| 120 | * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h. | |
| 121 | (x86-linux.o): New rule. | |
| 122 | * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o. | |
| 123 | * config/i386/linux64.mh (NATDEPFILES): Likewise. | |
| 124 | * nat/linux-nat.h (struct arch_lwp_info): New forward declaration. | |
| 125 | (lwp_set_arch_private_info): New declaration. | |
| 126 | (lwp_arch_private_info): Likewise. | |
| 127 | * linux-nat.c (lwp_set_arch_private_info): New function. | |
| 128 | (lwp_arch_private_info): Likewise. | |
| 129 | * x86-linux-nat.c: Include nat/x86-linux.h. | |
| 130 | (arch_lwp_info): Removed structure. | |
| 131 | (update_debug_registers_callback): | |
| 132 | Use lwp_set_debug_registers_changed. | |
| 133 | (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed | |
| 134 | and lwp_set_debug_registers_changed. | |
| 135 | (x86_linux_new_thread): Use lwp_set_debug_registers_changed. | |
| 136 | ||
| cff068da GB |
137 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 138 | ||
| 139 | * nat/linux-nat.h (ptid_of_lwp): New declaration. | |
| 140 | (lwp_is_stopped): Likewise. | |
| 141 | (lwp_stop_reason): Likewise. | |
| 142 | * linux-nat.c (ptid_of_lwp): New function. | |
| 143 | (lwp_is_stopped): Likewise. | |
| 144 | (lwp_is_stopped_by_watchpoint): Likewise. | |
| 145 | * x86-linux-nat.c (update_debug_registers_callback): | |
| 146 | Use lwp_is_stopped. | |
| 147 | (x86_linux_prepare_to_resume): Use ptid_of_lwp and | |
| 148 | lwp_stop_reason. | |
| 149 | ||
| b2f7c7e8 GB |
150 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 151 | ||
| 152 | * linux-nat.h (linux_stop_lwp): Move declaration to... | |
| 153 | * nat/linux-nat.h (linux_stop_lwp): New declaration. | |
| 154 | ||
| 6d4ee8c6 GB |
155 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 156 | ||
| 157 | * linux-nat.h: Include nat/linux-nat.h. | |
| 158 | (iterate_over_lwps): Move declaration to nat/linux-nat.h. | |
| 159 | * nat/linux-nat.h (struct lwp_info): New forward declaration. | |
| 160 | (iterate_over_lwps_ftype): New typedef. | |
| 161 | (iterate_over_lwps): New declaration. | |
| 162 | * linux-nat.h (iterate_over_lwps): Update comment. Use | |
| 163 | iterate_over_lwps_ftype. Update callback return value check. | |
| 164 | ||
| 70a0bb6b GB |
165 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 166 | ||
| 167 | * x86-nat.h (x86_debug_reg_state): Move declaration to... | |
| 168 | * nat/x86-dregs.h (x86_debug_reg_state): New declaration. | |
| 169 | ||
| 7b669087 GB |
170 | 2015-03-24 Gary Benson <gbenson@redhat.com> |
| 171 | ||
| 172 | * nat/linux-nat.h (current_lwp_ptid): New declaration. | |
| 173 | * linux-nat.c (current_lwp_ptid): New function. | |
| 174 | * x86-linux-nat.c: Include nat/linux-nat.h. | |
| 175 | (x86_linux_dr_get_addr): Use current_lwp_ptid. | |
| 176 | (x86_linux_dr_get_control): Likewise. | |
| 177 | (x86_linux_dr_get_status): Likewise. | |
| 178 | (x86_linux_dr_set_control): Likewise. | |
| 179 | (x86_linux_dr_set_addr): Likewise. | |
| 180 | ||
| 15630549 AT |
181 | 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| 182 | ||
| 183 | PR breakpoints/16466 | |
| 184 | * breakpoint.c (create_breakpoint): Set thread on breakpoint struct. | |
| 185 | ||
| 8a4506c0 JB |
186 | 2015-03-23 Joel Brobecker <brobecker@adacore.com> |
| 187 | ||
| 188 | * ser-mingw.c (ser_windows_setparity): Fix indentation. | |
| 189 | * ser-unix.c (hardwire_setparity): Likewise. | |
| 190 | ||
| 236af5e3 YG |
191 | 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com> |
| 192 | ||
| 193 | * NEWS: Mention set/show serial parity command. | |
| 194 | * monitor.c (monitor_open): Call serial_setparity. | |
| 195 | * remote.c (remote_open_1): Likewise. | |
| 196 | * ser-base.c (ser_base_serparity): New function. | |
| 197 | * ser-base.h (ser_base_setparity): Add declaration. | |
| 198 | * ser-go32.c (dos_ops): Set "setparity" field. | |
| 199 | * ser-mingw.c (ser_windows_raw): Do not set state.fParity and | |
| 200 | state.Parity. | |
| 201 | (ser_windows_setparity): New function. | |
| 202 | (hardwire_ops): Add ser_windows_setparity. | |
| 203 | (tty_ops): Add NULL for setparity field. | |
| 204 | (pipe_ops): Add ser_base_setparity. | |
| 205 | (tcp_ops): Likewise. | |
| 206 | * ser-pipe.c (pipe_ops): Likewise. | |
| 207 | * ser-tcp.c (tcp_ops): Likewise. | |
| 208 | * ser-unix.c (hardwire_setparity): Add declaration. | |
| 209 | (hardwire_raw): Don't reset PARENB flag. | |
| 210 | (hardwire_setparity): New function. | |
| 211 | (hardwire_ops): Add hardwire_setparity. | |
| 212 | * serial.c (serial_setparity): New function. | |
| 213 | (serial_parity): New global. | |
| 214 | (parity_none, parity_odd, parity_even, parity_enums, parity): | |
| 215 | New static globals. | |
| 216 | (set_parity): New function. | |
| 217 | (_initialize_serial): Add set/show serial parity commands. | |
| 218 | * serial.h (GDBPARITY_NONE): Define. | |
| 219 | (GDBPARITY_ODD): Define. | |
| 220 | (GDBPARITY_EVEN): Define. | |
| 221 | (serial_setparity) Add declaration. | |
| 222 | (struct serial_ops): Add setparity field. | |
| 223 | * target.h (serial_parity): Add declaration. | |
| 224 | ||
| 32b40af9 KS |
225 | 2015-03-23 Keith Seitz <keiths@redhat.com> |
| 226 | ||
| 227 | * linespec.c (linespec_lexer_lex_keyword): Update comment. | |
| 228 | ||
| 693dca06 KS |
229 | 2015-03-23 Keith Seitz <keiths@redhat.com> |
| 230 | ||
| 231 | * breakpoint.c (parse_breakpoint_sals): Use | |
| 232 | linespec_lexer_lex_keyword to ascertain if the user specified | |
| 233 | a NULL location. | |
| 234 | * linespec.c [IF_KEYWORD_INDEX]: Define. | |
| 235 | (linespec_lexer_lex_keyword): Export. | |
| 236 | (struct ls_parser) <keyword_ok>: Remove. | |
| 237 | A keyword is only a keyword if not followed by another keyword. | |
| 238 | (linespec_lexer_lex_one): Remove keyword_ok handling. | |
| 239 | Add comment explaining why the parsing stream is not advanced | |
| 240 | when a keyword is seen. | |
| 241 | (parse_linespec): Remove parser->keyword_ok. | |
| 242 | * linespec.h (linespec_lexer_lex_keyword): Add declaration. | |
| 243 | ||
| 7e993ebf KS |
244 | 2015-03-23 Keith Seitz <keiths@redhat.com> |
| 245 | ||
| 246 | PR gdb/18021 | |
| 247 | * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint | |
| 248 | if we find a static method with DW_AT_vtable_elem_location. | |
| 249 | ||
| b1a0f704 EZ |
250 | 2015-03-21 Eli Zaretskii <eliz@gnu.org> |
| 251 | ||
| 252 | * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter | |
| 253 | before the second loop, to avoid undefined behavior. Reported by | |
| 254 | Anton Blanchard <anton@samba.org>. | |
| 255 | ||
| d9823cbb KB |
256 | 2015-03-20 Keven Boell <keven.boell@intel.com> |
| 257 | ||
| 258 | * gdbtypes.c (resolve_dynamic_type_internal): Adapt | |
| 259 | data_location usage to linked list. | |
| 260 | (resolve_dynamic_type_internal): Adapt data_location to | |
| 261 | linked list. | |
| 262 | (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function. | |
| 263 | (copy_type_recursive, copy_type): Add copy of linked list. | |
| 264 | * gdbtypes.h (enum dynamic_prop_node_kind): New enum. | |
| 265 | (struct dynamic_prop_list): New struct. | |
| 266 | * dwarf2read.c (set_die_type): Set data_location data. | |
| 267 | ||
| 2e7bf1d7 PA |
268 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 269 | ||
| 270 | * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to | |
| 271 | inner block and make it const. | |
| 272 | * machoread.c (get_archive_prefix_len): Make "lparen" const. | |
| 273 | ||
| 7a26bd4d PA |
274 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 275 | ||
| 276 | * breakpoint.c (set_breakpoint_condition): Make argument "exp" const. | |
| 277 | * breakpoint.h (set_breakpoint_condition): Update declaration. | |
| 278 | ||
| cd46431b PA |
279 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 280 | ||
| 281 | * tui/tui-io.c (tui_expand_tabs): Make "s1" const. | |
| 282 | ||
| e28566f7 PA |
283 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 284 | ||
| 285 | * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const. | |
| 286 | ||
| f6fc92f6 PA |
287 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 288 | ||
| 289 | * remote-m32r-sdi.c (m32r_open): Make "port_str" const. | |
| 290 | ||
| c32ed3ef PA |
291 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 292 | ||
| 293 | * nto-tdep.c (nto_find_and_open_solib): Make "endian" const. | |
| 294 | (nto_init_solib_absolute_prefix): Likewise. | |
| 295 | ||
| 53e78085 PA |
296 | 2015-03-20 Pedro Alves <palves@redhat.com> |
| 297 | ||
| 298 | * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const. | |
| 299 | * spu-tdep.c (spu_gdbarch_init): Make "name" const. | |
| 300 | ||
| bc23328c JK |
301 | 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 302 | ||
| 303 | * config/djgpp/README: Remove gdb.hp. | |
| 304 | ||
| e8ffc436 YQ |
305 | 2015-03-20 Yao Qi <yao.qi@linaro.org> |
| 306 | ||
| 307 | * aarch64-tdep.c (aarch64_gdbarch_init): Don't call | |
| 308 | set_gdbarch_cannot_step_breakpoint. | |
| 309 | ||
| 23f238d3 PA |
310 | 2015-03-19 Pedro Alves <palves@redhat.com> |
| 311 | ||
| 312 | * linux-nat.c (linux_resume_one_lwp): Rename to ... | |
| 313 | (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here, | |
| 314 | instead call perror_with_name. | |
| 315 | (check_ptrace_stopped_lwp_gone): New function. | |
| 316 | (linux_resume_one_lwp): Reimplement as wrapper around | |
| 317 | linux_resume_one_lwp_throw that swallows errors if the LWP is | |
| 318 | gone. | |
| 319 | (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and | |
| 320 | swallows errors if the LWP is gone. Use | |
| 321 | linux_resume_one_lwp_throw instead of linux_resume_one_lwp. | |
| 322 | ||
| eb54c8bf PA |
323 | 2015-03-19 Pedro Alves <palves@redhat.com> |
| 324 | ||
| 325 | * linux-nat.c (status_callback): Return early if the LWP has no | |
| 326 | status pending. | |
| 327 | ||
| b90fc188 PA |
328 | 2015-03-19 Pedro Alves <palves@redhat.com> |
| 329 | ||
| 330 | * linux-nat.c (select_event_lwp_callback): Update comment to no | |
| 331 | longer mention SIGTRAP. | |
| 332 | ||
| 670f82d4 TG |
333 | 2015-03-18 Tristan Gingold <gingold@adacore.com> |
| 334 | ||
| 335 | * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move | |
| 336 | redirection code to ... | |
| 337 | (amd64_windows_frame_decode_insns): ... Here. Fix in prologue | |
| 338 | checks. Fix SAVE_NONVOL operations. Add debug code and comments. | |
| 339 | ||
| 464b0089 GB |
340 | 2015-03-18 Gary Benson <gbenson@redhat.com> |
| 341 | ||
| 342 | (remote_protocol_features): Remove the "vFile:fstat" feature. | |
| 343 | (remote_hostio_fstat): Probe for "vFile:fstat" support. | |
| 344 | ||
| f68f11b7 YQ |
345 | 2015-03-11 Yao Qi <yao.qi@linaro.org> |
| 346 | ||
| 347 | PR tdep/18107 | |
| 348 | * aarch64-linux-tdep.c: Include xml-syscall.h | |
| 349 | (aarch64_linux_get_syscall_number): New function. | |
| 350 | (aarch64_linux_init_abi): Call | |
| 351 | set_gdbarch_get_syscall_number. | |
| 352 | * syscalls/aarch64-linux.xml: New file. | |
| 353 | ||
| 393bd0c0 YG |
354 | 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com> |
| 355 | ||
| 356 | * ser-base.h (ser_base_setstopbits): Change second argument name | |
| 357 | from "rate" to "num". | |
| 358 | ||
| 7f3647e2 GB |
359 | 2015-03-17 Gary Benson <gbenson@redhat.com> |
| 360 | Luke Allardyce <lukeallardyce@gmail.com> | |
| 361 | ||
| 362 | PR gdb/18131 | |
| 363 | * common/common-remote-fileio.h (sys/stat.h): New include. | |
| 364 | (stuct stat): Remove forward declaration. | |
| 365 | ||
| 3ce5b6e2 JB |
366 | 2015-03-16 John Baldwin <jhb@FreeBSD.org> |
| 367 | ||
| 368 | * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers | |
| 369 | before writing core register notes. | |
| 370 | ||
| d053f6be YZ |
371 | 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com> |
| 372 | Pedro Alves <palves@redhat.com> | |
| 373 | ||
| 374 | * gdb_curses.h (tgetnum): Mark with EXTERN_C. | |
| 375 | * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs) | |
| 376 | (tgoto): Wrap with extern "C". | |
| 377 | ||
| b1a921c8 PA |
378 | 2015-03-16 Pedro Alves <palves@redhat.com> |
| 379 | Yuanhui Zhang <asmwarrior@gmail.com> | |
| 380 | ||
| 381 | * stub-termcap.c (tputs): Change prototype. | |
| 382 | ||
| 876d1cd7 YZ |
383 | 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com> |
| 384 | Pedro Alves <palves@redhat.com> | |
| 385 | ||
| 386 | * windows-nat.c (struct thread_info_struct): Rename to ... | |
| 387 | (struct windows_thread_info_struct): ... this. | |
| 388 | (thread_info): Rename to ... | |
| 389 | (windows_thread_info): ... this. | |
| 390 | All users updated. | |
| 391 | ||
| 0800b440 JK |
392 | 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 393 | Pedro Alves <palves@redhat.com> | |
| 394 | ||
| 395 | * NEWS: New Removed targets and native configurations. | |
| 396 | ||
| 397 | 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com> | |
| 61a12cfa JK |
398 | |
| 399 | Remove HPUX. | |
| 400 | * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o. | |
| 401 | (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o. | |
| 402 | (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and | |
| 403 | ia64-hpux-tdep.h, solib-ia64-hpux.h. | |
| 404 | (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c, | |
| 405 | ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c. | |
| 406 | * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and | |
| 407 | hppa-hpux-tdep.c. | |
| 408 | * config/ia64/hpux.mh: Remove file. | |
| 409 | * config/pa/hpux.mh: Remove file. | |
| 410 | * configure: Rebuilt. | |
| 411 | * configure.ac (dlgetmodinfo, somread.o): Remove. | |
| 412 | * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete. | |
| 413 | (ia64-*-hpux*): Remove its float format exception. | |
| 414 | * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete. | |
| 415 | * hppa-hpux-nat.c: Remove file. | |
| 416 | * hppa-hpux-tdep.c: Remove file. | |
| 417 | * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private): | |
| 418 | Move them here from hppa-tdep.h | |
| 419 | (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static. | |
| 420 | (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception. | |
| 421 | * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private): | |
| 422 | Move them to hppa-tdep.c. | |
| 423 | (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove | |
| 424 | declarations. | |
| 425 | * ia64-hpux-nat.c: Remove file. | |
| 426 | * ia64-hpux-tdep.c: Remove file. | |
| 427 | * ia64-hpux-tdep.h: Remove file. | |
| 428 | * inf-ttrace.c: Remove file. | |
| 429 | * inf-ttrace.h: Remove file. | |
| 430 | * solib-ia64-hpux.c: Remove file. | |
| 431 | * solib-ia64-hpux.h: Remove file. | |
| 432 | * solib-pa64.c: Remove file. | |
| 433 | * solib-pa64.h: Remove file. | |
| 434 | * solib-som.c: Remove file. | |
| 435 | * solib-som.h: Remove file. | |
| 436 | * somread.c: Remove file. | |
| 437 | ||
| 25268153 JB |
438 | 2015-03-13 John Baldwin <jhb@FreeBSD.org> |
| 439 | ||
| 440 | * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util). | |
| 441 | * config.in: Regenerate. | |
| 442 | * configure: Regenerate. | |
| 443 | * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't | |
| 444 | define. | |
| 445 | (fbsd_find_memory_regions): Use kinfo_getvmmap to | |
| 446 | enumerate memory regions if present. | |
| 447 | ||
| 773eacf5 JB |
448 | 2015-03-13 John Baldwin <jhb@FreeBSD.org> |
| 449 | ||
| 450 | * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes. | |
| 451 | * i386fbsd-tdep.c: Fix style in various gdb_static_assert | |
| 452 | expressions. | |
| 453 | (i386fbsd_sigtramp_p): Likewise. | |
| 454 | ||
| 01b6bdb0 JB |
455 | 2015-03-12 John Baldwin <jhb@FreeBSD.org> |
| 456 | ||
| 457 | * MAINTAINERS (Write After Approval): Add John Baldwin. | |
| 458 | ||
| 811a659a GB |
459 | 2015-03-12 Gary Benson <gbenson@redhat.com> |
| 460 | ||
| 461 | * solib.c (_initialize_solib): Make "set/show sysroot" use | |
| 462 | add_setshow_optional_filename_cmd so it can be restored to | |
| 463 | empty after being set. | |
| 464 | ||
| 10304ef3 SDJ |
465 | 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com> |
| 466 | ||
| 467 | * Makefile.in (SFILES): New source break-catch-syscall.c. | |
| 468 | (COMMON_OBS): New object break-catch-syscall.o. | |
| 469 | * break-catch-syscall.c: New file. | |
| 470 | * breakpoint.c: Remove inclusion of "xml-syscall.h". | |
| 471 | (syscall_catchpoint_p): Move declaration to break-catch-syscall.c | |
| 472 | (struct syscall_catchpoint): Likewise. | |
| 473 | (dtor_catch_syscall): Likewise. | |
| 474 | (catch_syscall_inferior_data): Likewise. | |
| 475 | (struct catch_syscall_inferior_data): Likewise. | |
| 476 | (get_catch_syscall_inferior_data): Likewise. | |
| 477 | (catch_syscall_inferior_data_cleanup): Likewise. | |
| 478 | (insert_catch_syscall): Likewise. | |
| 479 | (remove_catch_syscall): Likewise. | |
| 480 | (breakpoint_hit_catch_syscall): Likewise. | |
| 481 | (print_it_catch_syscall): Likewise. | |
| 482 | (print_one_catch_syscall): Likewise. | |
| 483 | (print_mention_catch_syscall): Likewise. | |
| 484 | (print_recreate_catch_syscall): Likewise. | |
| 485 | (catch_syscall_breakpoint_ops): Likewise. | |
| 486 | (syscall_catchpoint_p): Likewise. | |
| 487 | (create_syscall_event_catchpoint): Likewise. | |
| 488 | (catch_syscall_split_args): Likewise. | |
| 489 | (catch_syscall_command_1): Likewise. | |
| 490 | (is_syscall_catchpoint_enabled): Likewise. | |
| 491 | (catch_syscall_enabled): Likewise. | |
| 492 | (catching_syscall_number): Likewise. | |
| 493 | (catch_syscall_completer): Likewise. | |
| 494 | (clear_syscall_counts): Likewise. | |
| 495 | (initialize_breakpoint_ops): Move initialization of syscall | |
| 496 | catchpoints to break-catch-syscall.c. | |
| 497 | (_initialize_breakpoint): Move code related to syscall catchpoints | |
| 498 | to break-catch-syscall.c. | |
| 499 | ||
| badd37ce SDJ |
500 | 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com> |
| 501 | ||
| 502 | * breakpoint.c (breakpoint_find_if): New function. | |
| 503 | * breakpoint.h (breakpoint_find_if): New prototype. | |
| 504 | ||
| 0a93529c GB |
505 | 2015-03-11 Gary Benson <gbenson@redhat.com> |
| 506 | ||
| 507 | * remote-fileio.h (remote_fileio_to_host_stat): New declaration. | |
| 508 | * remote-fileio.c (remote_fileio_to_host_uint): New function. | |
| 509 | (remote_fileio_to_host_ulong): Likewise. | |
| 510 | (remote_fileio_to_host_mode): Likewise. | |
| 511 | (remote_fileio_to_host_time): Likewise. | |
| 512 | (remote_fileio_to_host_stat): Likewise. | |
| 513 | * remote.c (PACKET_vFile_fstat): New enum value. | |
| 514 | (remote_protocol_features): Register the "vFile:fstat" feature. | |
| 515 | (remote_hostio_fstat): New function. | |
| 516 | (remote_bfd_iovec_stat): Use the above. | |
| 517 | (_initialize_remote): Register new "set/show remote | |
| 518 | hostio-fstat-packet" command. | |
| 519 | * symfile.c (separate_debug_file_exists): Update comment. | |
| 520 | * NEWS: Announce new vFile:fstat packet. | |
| 521 | ||
| 791c0056 GB |
522 | 2015-03-11 Gary Benson <gbenson@redhat.com> |
| 523 | ||
| 524 | * common/common-remote-fileio.h: New file. | |
| 525 | * common/common-remote-fileio.c: Likewise. | |
| 526 | * Makefile.in (SFILES): Add common/common-remote-fileio.c. | |
| 527 | (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h. | |
| 528 | (COMMON_OBS): Add common-remote-fileio.o. | |
| 529 | (common-remote-fileio.o): New rule. | |
| 530 | * remote-fileio.h (common-remote-fileio.h): New include. | |
| 531 | * remote-fileio.c (gdb/fileio.h): Do not include. | |
| 532 | (remote_fileio_to_be): Moved to common-remote-fileio.h. | |
| 533 | (remote_fileio_to_fio_uint): Likewise. | |
| 534 | (remote_fileio_to_fio_time): Likewise. | |
| 535 | (remote_fileio_mode_to_target): Moved to common-remote-fileio.c. | |
| 536 | (remote_fileio_to_fio_mode): Likewise. | |
| 537 | (remote_fileio_to_fio_ulong): Likewise. | |
| 538 | (remote_fileio_to_fio_stat): Likewise. | |
| 539 | ||
| 1390d0ef AW |
540 | 2015-03-11 Andy Wingo <wingo@igalia.com> |
| 541 | ||
| 542 | * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which | |
| 543 | we were checking the cached type, not the cached dynamic type. | |
| 544 | ||
| 84a4591a AW |
545 | 2015-03-11 Andy Wingo <wingo@igalia.com> |
| 546 | ||
| 547 | * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and | |
| 548 | other strings, as these are on the GC'd heap, and will be | |
| 549 | collected along with the smob. | |
| 550 | ||
| 85642ba0 AW |
551 | 2015-03-11 Andy Wingo <wingo@igalia.com> |
| 552 | ||
| 553 | * guile/scm-objfile.c (gdbscm_objfile_progspace): New function. | |
| 554 | (objfile_functions): Bind gdbscm_objfile_progspace to | |
| 555 | objfile-progspace. | |
| 556 | * guile/lib/gdb.scm: Add objfile-progspace to exports. | |
| 557 | ||
| 92fab5a6 AW |
558 | 2015-03-11 Andy Wingo <wingo@igalia.com> |
| 559 | ||
| 560 | * guile/guile.c (_initialize_guile): Disable automatic | |
| 561 | finalization, if Guile offers us that possibility. | |
| 562 | * guile/guile.c (call_initialize_gdb_module): | |
| 563 | * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run | |
| 564 | finalizers in appropriate places. | |
| 565 | * configure.ac (AC_TRY_LIBGUILE): Add a check for | |
| 566 | scm_set_automatic_finalization_enabled. | |
| 567 | * configure: Regenerated. | |
| 568 | ||
| f054145e AA |
569 | 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 570 | ||
| 571 | * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using | |
| 572 | SAL, if possible. | |
| 573 | ||
| 18396193 AA |
574 | 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 575 | ||
| 576 | * s390-linux-nat.c (struct arch_lwp_info): New. | |
| 577 | (s390_fix_watch_points): Rename to... | |
| 578 | (s390_prepare_to_resume): ...this. Skip the PER info update | |
| 579 | unless the watch points have changed. | |
| 580 | (s390_refresh_per_info, s390_new_thread): New functions. | |
| 581 | (s390_insert_watchpoint): Call s390_refresh_per_info instead of | |
| 582 | s390_fix_watch_points. | |
| 583 | (s390_remove_watchpoint): Likewise. | |
| 584 | (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points. | |
| 585 | Register s390_prepare_to_resume. | |
| 586 | ||
| 9eb1356e PA |
587 | 2015-03-09 Pedro Alves <palves@redhat.com> |
| 588 | ||
| 589 | Revert: | |
| 590 | 2015-03-07 Pedro Alves <palves@redhat.com> | |
| 591 | * common/gdb_socket.h: New file. | |
| 592 | * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor | |
| 593 | sys/socket.h. | |
| 594 | (net_open): Use union gdb_sockaddr_u. | |
| 595 | ||
| aac331e4 PA |
596 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 597 | ||
| 598 | * configure.ac (build_warnings): Move -Wmissing-prototypes | |
| 599 | -Wdeclaration-after-statement -Wmissing-parameter-type | |
| 600 | -Wold-style-declaration -Wold-style-definition to the C-specific | |
| 601 | set. | |
| 602 | * configure: Regenerate. | |
| 603 | ||
| 366c75fc PA |
604 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 605 | ||
| 606 | * common/gdb_socket.h: New file. | |
| 607 | * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor | |
| 608 | sys/socket.h. | |
| 609 | (net_open): Use union gdb_sockaddr_u. | |
| 610 | ||
| 72df25b2 PA |
611 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 612 | ||
| 613 | * common/common-exceptions.c [!__cplusplus] (enum catcher_state) | |
| 614 | (exceptions_state_mc_action_iter) | |
| 615 | (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch): | |
| 616 | Don't define. | |
| 617 | [__cplusplus] (try_scope_depth): New global. | |
| 618 | [__cplusplus] (exception_try_scope_entry) | |
| 619 | (exception_try_scope_exit, gdb_exception_sliced_copy) | |
| 620 | (exception_rethrow): New functions. | |
| 621 | (throw_exception): In C++ mode, throw | |
| 622 | gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and | |
| 623 | gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR. | |
| 624 | (throw_it): In C++ mode, use try_scope_depth. | |
| 625 | * common/common-exceptions.h [!__cplusplus] | |
| 626 | (exceptions_state_mc_action_iter) | |
| 627 | (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch): | |
| 628 | Don't declare. | |
| 629 | [__cplusplus] (exception_try_scope_entry) | |
| 630 | (exception_try_scope_exit, exception_rethrow): Declare. | |
| 631 | [__cplusplus] (struct exception_try_scope): New struct. | |
| 632 | [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real | |
| 633 | C++ exceptions. | |
| 634 | (struct gdb_exception_RETURN_MASK_ALL) | |
| 635 | (struct gdb_exception_RETURN_MASK_ERROR) | |
| 636 | (struct gdb_exception_RETURN_MASK_QUIT): New types. | |
| 637 | ||
| 284e6217 PA |
638 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 639 | ||
| 640 | * main.c (handle_command_errors): Remove volatile qualifier from | |
| 641 | parameter. | |
| 642 | ||
| 6c63c96a PA |
643 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 644 | ||
| 645 | * breakpoint.c (save_breakpoints): Adjust to avoid code between | |
| 646 | TRY and CATCH. | |
| 647 | * gdbtypes.c (safe_parse_type): Remove empty line. | |
| 648 | (types_deeply_equal): | |
| 649 | * guile/scm-frame.c (gdbscm_frame_name): | |
| 650 | * linux-thread-db.c (find_new_threads_once): | |
| 651 | * python/py-breakpoint.c (bppy_get_commands): | |
| 652 | * record-btrace.c (record_btrace_insert_breakpoint) | |
| 653 | (record_btrace_remove_breakpoint, record_btrace_start_replaying) | |
| 654 | (record_btrace_start_replaying): Adjust to avoid code between TRY | |
| 655 | and CATCH. | |
| 656 | ||
| 492d29ea PA |
657 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 658 | ||
| 659 | * common/common-exceptions.c (struct catcher) <exception>: No | |
| 660 | longer a pointer to volatile exception. Now an exception value. | |
| 661 | <mask>: Delete field. | |
| 662 | (exceptions_state_mc_init): Remove all parameters. Adjust. | |
| 663 | (exceptions_state_mc): No longer pop the catcher here. | |
| 664 | (exceptions_state_mc_catch): New function. | |
| 665 | (throw_exception): Adjust. | |
| 666 | * common/common-exceptions.h (exceptions_state_mc_init): Remove | |
| 667 | all parameters. | |
| 668 | (exceptions_state_mc_catch): Declare. | |
| 669 | (TRY_CATCH): Rename to ... | |
| 670 | (TRY): ... this. Remove EXCEPTION and MASK parameters. | |
| 671 | (CATCH, END_CATCH): New. | |
| 672 | All callers adjusted. | |
| 673 | ||
| ece957c8 TT |
674 | 2015-03-07 Tom Tromey <tromey@redhat.com> |
| 675 | ||
| 676 | * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX. | |
| 677 | ||
| 7556d4a4 PA |
678 | 2015-03-07 Pedro Alves <palves@redhat.com> |
| 679 | ||
| 680 | * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache) | |
| 681 | (amd64_epilogue_frame_cache): Normal exception handling code. | |
| 682 | * break-catch-throw.c (check_status_exception_catchpoint) | |
| 683 | (re_set_exception_catchpoint): Ditto. | |
| 684 | * cli/cli-interp.c (safe_execute_command): | |
| 685 | * cli/cli-script.c (script_from_file): Ditto. | |
| 686 | * compile/compile-c-symbols.c (generate_c_for_for_one_variable): | |
| 687 | Ditto. | |
| 688 | * compile/compile-object-run.c (compile_object_run): Ditto. | |
| 689 | * cp-abi.c (baseclass_offset): Ditto. | |
| 690 | * cp-valprint.c (cp_print_value): Ditto. | |
| 691 | * exceptions.c (catch_exceptions_with_msg): | |
| 692 | * frame-unwind.c (frame_unwind_try_unwinder): Ditto. | |
| 693 | * frame.c (get_frame_address_in_block_if_available): Ditto. | |
| 694 | * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache) | |
| 695 | (i386_sigtramp_frame_cache): Ditto. | |
| 696 | * infcmd.c (post_create_inferior): Ditto. | |
| 697 | * linespec.c (parse_linespec, find_linespec_symbols): | |
| 698 | * p-valprint.c (pascal_object_print_value): Ditto. | |
| 699 | * parse.c (parse_expression_for_completion): Ditto. | |
| 700 | * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto. | |
| 701 | * remote.c (remote_get_noisy_reply): Ditto. | |
| 702 | * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto. | |
| 703 | * solib-svr4.c (solib_svr4_r_map): Ditto. | |
| 704 | ||
| f873665f | 705 | 2015-03-06 Gary Benson <gbenson@redhat.com> |
| 61012eef GB |
706 | |
| 707 | * common/common-utils.h (startswith): New inline function. | |
| 708 | All places where this logic was used updated to use the above. | |
| 709 | ||
| 68901c4d PA |
710 | 2015-03-05 Pedro Alves <palves@redhat.com> |
| 711 | ||
| 712 | PR gdb/18002 | |
| 713 | * mem-break.c (default_memory_insert_breakpoint): Set shadow_len | |
| 714 | after reading the breakpoint's shadow memory. | |
| 715 | ||
| 2dcb2b1a MK |
716 | 2015-03-05 Mark Kettenis <kettenis@gnu.org> |
| 717 | ||
| 718 | * hppabsd-nat.c: Remove file. | |
| 719 | * hppaobsd-nat.c: New file. | |
| 720 | * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add | |
| 721 | hppaobsd-nat.c. | |
| 722 | * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with | |
| 723 | hppaobsd-nat.o. | |
| 724 | ||
| 527a273a PA |
725 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 726 | ||
| 727 | * target.h (struct target_ops) <to_decr_pc_after_break>: Delete. | |
| 728 | (target_decr_pc_after_break): Delete declaration. | |
| 729 | * target.c (default_target_decr_pc_after_break) | |
| 730 | (target_decr_pc_after_break): Delete. | |
| 731 | * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use | |
| 732 | gdbarch_decr_pc_after_break instead of target_decr_pc_after_break. | |
| 733 | * linux-thread-db.c (check_event): Likewise. | |
| 734 | * infrun.c (adjust_pc_after_break): Likewise. | |
| 735 | * darwin-nat.c (cancel_breakpoint): Likewise. | |
| 736 | * aix-thread.c (aix_thread_wait): Likewise. | |
| 737 | * target-delegates.c: Regenerate. | |
| 738 | ||
| faf09f01 PA |
739 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 740 | ||
| 741 | * linux-nat.c (save_sigtrap): Check for breakpoints before | |
| 742 | checking watchpoints. | |
| 743 | (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a | |
| 744 | breakpoint is inserted if relying on SIGTRAP's siginfo.si_code. | |
| 745 | (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether | |
| 746 | a breakpoint triggered based on the SIGTRAP's siginfo.si_code. | |
| 747 | (linux_nat_stopped_by_sw_breakpoint) | |
| 748 | (linux_nat_supports_stopped_by_sw_breakpoint) | |
| 749 | (linux_nat_stopped_by_hw_breakpoint) | |
| 750 | (linux_nat_supports_stopped_by_hw_breakpoint): New functions. | |
| 751 | (linux_nat_wait_1): Don't re-increment the PC if relying on | |
| 752 | SIGTRAP's siginfo->si_code. | |
| 753 | (linux_nat_add_target): Install new target methods. | |
| 754 | * linux-thread-db.c (check_event): Don't account for breakpoint PC | |
| 755 | offset if the target already adjusted the PC. | |
| 756 | * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New. | |
| 757 | (GDB_ARCH_TRAP_BRKPT): New. | |
| 758 | (TRAP_HWBKPT): Define if not already defined. | |
| 759 | ||
| f7e6eed5 PA |
760 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 761 | ||
| 762 | * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons. | |
| 763 | * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>: | |
| 764 | Delete field. | |
| 765 | <stop_reason>: New field. | |
| 766 | (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values. | |
| 767 | (packet_set_cmd_state): New function. | |
| 768 | (remote_protocol_features): Register the "swbreak" and "hwbreak" | |
| 769 | features. | |
| 770 | (remote_query_supported): If not disabled with the corresponding | |
| 771 | "set remote foo-packet" command, report support for the swbreak | |
| 772 | and hwbreak features. | |
| 773 | (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete | |
| 774 | field. | |
| 775 | <stop_reason>: New field. | |
| 776 | (remote_parse_stop_reply): Handle "swbreak" and "hwbreak". | |
| 777 | (remote_wait_as): Adjust. | |
| 778 | (remote_stopped_by_sw_breakpoint) | |
| 779 | (remote_supports_stopped_by_sw_breakpoint) | |
| 780 | (remote_stopped_by_hw_breakpoint) | |
| 781 | (remote_supports_stopped_by_hw_breakpoint): New functions. | |
| 782 | (remote_stopped_by_watchpoint): New function. | |
| 783 | (init_remote_ops): Install them. | |
| 784 | (_initialize_remote): Register new "set/show remote | |
| 785 | swbreak-feature-packet" and "set/show remote | |
| 786 | swbreak-feature-packet" commands. | |
| 787 | ||
| 9e8915c6 PA |
788 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 789 | ||
| 790 | * btrace.h: Include target/waitstatus.h. | |
| 791 | (struct btrace_thread_info) <stop_reason>: New field. | |
| 792 | * record-btrace.c (record_btrace_step_thread): Use | |
| 793 | record_check_stopped_by_breakpoint instead of breakpoint_here_p. | |
| 794 | (record_btrace_decr_pc_after_break): Delete. | |
| 795 | (record_btrace_stopped_by_sw_breakpoint) | |
| 796 | (record_btrace_supports_stopped_by_sw_breakpoint) | |
| 797 | (record_btrace_stopped_by_hw_breakpoint) | |
| 798 | (record_btrace_supports_stopped_by_hw_breakpoint): New functions. | |
| 799 | (init_record_btrace_ops): Install them. | |
| 800 | * record-full.c (record_full_hw_watchpoint): Delete and replace | |
| 801 | with ... | |
| 802 | (record_full_stop_reason): ... this throughout. | |
| 803 | (record_full_exec_insn): Adjust. | |
| 804 | (record_full_wait_1): Adjust. No longer re-increment the PC. | |
| 805 | (record_full_wait_1): Adjust. Use | |
| 806 | record_check_stopped_by_breakpoint instead of breakpoint_here_p. | |
| 807 | (record_full_stopped_by_watchpoint): Adjust. | |
| 808 | (record_full_stopped_by_sw_breakpoint) | |
| 809 | (record_full_supports_stopped_by_sw_breakpoint) | |
| 810 | (record_full_supports_stopped_by_sw_breakpoint) | |
| 811 | (record_full_stopped_by_hw_breakpoint) | |
| 812 | (record_full_supports_stopped_by_hw_breakpoint): New functions. | |
| 813 | (init_record_full_ops, init_record_full_core_ops): Install them. | |
| 814 | * record.c (record_check_stopped_by_breakpoint): New function. | |
| 815 | * record.h: Include target/waitstatus.h. | |
| 816 | (record_check_stopped_by_breakpoint): New declaration. | |
| 817 | ||
| 15c66dd6 PA |
818 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 819 | ||
| 820 | enum lwp_stop_reason -> enum target_stop_reason | |
| 821 | * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint) | |
| 822 | (linux_nat_stopped_by_watchpoint, status_callback) | |
| 823 | (linux_nat_wait_1): Adjust. | |
| 824 | * linux-nat.h (enum lwp_stop_reason): Delete. | |
| 825 | (struct lwp_info) <stop_reason>: Now an enum target_stop_reason. | |
| 826 | * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust. | |
| 827 | * target/waitstatus.h (enum target_stop_reason): New. | |
| 828 | ||
| 1cf4d951 PA |
829 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 830 | ||
| 831 | * breakpoint.c (need_moribund_for_location_type): New function. | |
| 832 | (bpstat_stop_status): Don't skipping checking moribund locations | |
| 833 | of breakpoint types which the target tell caused a stop. | |
| 834 | (program_breakpoint_here_p): New function, factored out from ... | |
| 835 | (bp_loc_is_permanent): ... this. | |
| 836 | (update_global_location_list): Don't create a moribund location if | |
| 837 | the target supports reporting stops of the type of the removed | |
| 838 | breakpoint. | |
| 839 | * breakpoint.h (program_breakpoint_here_p): New declaration. | |
| 840 | * infrun.c (adjust_pc_after_break): Return early if the target has | |
| 841 | already adjusted the PC. Add comments. | |
| 842 | (handle_signal_stop): If nothing explains a signal, and the target | |
| 843 | tells us the stop was caused by a software breakpoint, check if | |
| 844 | there's a breakpoint instruction in the memory. If so, adjust the | |
| 845 | PC before presenting the stop to the user. Otherwise, ignore the | |
| 846 | trap. If nothing explains a signal, and the target tells us the | |
| 847 | stop was caused by a hardware breakpoint, ignore the trap. | |
| 848 | * target.h (struct target_ops) <to_stopped_by_sw_breakpoint, | |
| 849 | to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint, | |
| 850 | to_supports_stopped_by_hw_breakpoint>: New fields. | |
| 851 | (target_stopped_by_sw_breakpoint) | |
| 852 | (target_supports_stopped_by_sw_breakpoint) | |
| 853 | (target_stopped_by_hw_breakpoint) | |
| 854 | (target_supports_stopped_by_hw_breakpoint): Define. | |
| 855 | * target-delegates.c: Regenerate. | |
| 856 | ||
| 79639e11 PA |
857 | 2015-03-04 Pedro Alves <palves@redhat.com> |
| 858 | ||
| 859 | * infrun.c (follow_fork_inferior): Use the whole of the | |
| 860 | inferior_ptid and pending_follow.related_pid ptids instead of | |
| 861 | building ptids from the process components. Adjust verbose output | |
| 862 | to use target_pid_to_str. | |
| 863 | * linux-nat.c (linux_child_follow_fork): Use the whole of the | |
| 864 | inferior_ptid and pending_follow.related_pid ptids instead of | |
| 865 | building ptids from the process components. | |
| 866 | ||
| e85e8e5e MK |
867 | 2015-03-04 Mark Kettenis <kettenis@gnu.org> |
| 868 | ||
| 869 | * inf-ptrace.c [PT_GET_PROCESS_STATE] | |
| 870 | (inf_ptrace_insert_fork_catchpoint): New function. | |
| 871 | (inf_ptrace_remove_fork_catchpoint): New function. | |
| 872 | (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them. | |
| 873 | ||
| 87de11c0 AA |
874 | 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 875 | ||
| 876 | * s390-linux-tdep.c (s390_register_name): Return empty string | |
| 877 | instead of NULL for registers that shouldn't be visible. | |
| 878 | ||
| d851a69a AA |
879 | 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 880 | ||
| 881 | * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall | |
| 882 | XML file for 64-bit targets. | |
| 883 | ||
| b072f6c1 SM |
884 | 2015-03-03 Simon Marchi <simon.marchi@ericsson.com> |
| 885 | ||
| 886 | * target.h (find_default_create_inferior): Remove declaration. | |
| 887 | (find_default_attach): Likewise. | |
| 888 | ||
| c1593e4f PA |
889 | 2015-03-03 Pedro Alves <palves@redhat.com> |
| 890 | ||
| 891 | * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace. | |
| 892 | Use ptid_get_pid to get the overall process id when resuming all | |
| 893 | threads. | |
| 894 | ||
| 90ad5e1d PA |
895 | 2015-03-03 Pedro Alves <palves@redhat.com> |
| 896 | ||
| 897 | * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of | |
| 898 | the lwp field of ptid. Pass the full ptid to get_thread_regcache. | |
| 899 | * inf-ptrace.c (get_ptrace_pid): New function. | |
| 900 | (inf_ptrace_resume): Use it. | |
| 901 | * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified | |
| 902 | to the lower layer. | |
| 903 | ||
| d68e53f4 MM |
904 | 2015-03-03 Markus Metzger <markus.t.metzger@intel.com> |
| 905 | ||
| 906 | * nat/linux-btrace.c: Include sys/utsname.h. | |
| 907 | (linux_determine_kernel_ptr_bits): New. | |
| 908 | (linux_enable_bts): Call linux_determine_kernel_ptr_bits. | |
| 909 | * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero | |
| 910 | ptr_bits. | |
| 911 | ||
| 986b6601 MM |
912 | 2015-03-03 Markus Metzger <markus.t.metzger@intel.com> |
| 913 | ||
| 914 | * btrace.c (ftrace_update_function): Treat return as tailcall for | |
| 915 | "_dl_runtime_resolve". | |
| 916 | ||
| ce0dfbea MM |
917 | 2015-03-03 Markus Metzger <markus.t.metzger@intel.com> |
| 918 | ||
| 919 | * btrace.h (btrace_function) <lbegin, lend>: Remove. | |
| 920 | * btrace.c (ftrace_debug): Do not print the line range. | |
| 921 | (ftrace_skip_file, ftrace_update_lines): Remove. | |
| 922 | (ftrace_new_function): Remove lbegin and lend initialization. | |
| 923 | (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines. | |
| 924 | * record-btrace.c (btrace_compute_src_line_range): New. | |
| 925 | (btrace_call_history_src_line): Call btrace_compute_src_line_range. | |
| 926 | ||
| 95e50b27 PA |
927 | 2015-03-02 Pedro Alves <palves@redhat.com> |
| 928 | ||
| 929 | * infrun.c (follow_exec): Delete all threads of the process except | |
| 930 | the event thread. Extended comments. | |
| 931 | ||
| 00e474c2 JB |
932 | 2015-03-02 Joel Brobecker <brobecker@adacore.com> |
| 933 | ||
| 934 | * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false". | |
| 935 | ||
| cc7039d3 JB |
936 | 2015-03-02 Joel Brobecker <brobecker@adacore.com> |
| 937 | ||
| 938 | * utils.h: Remove <stdbool.h> #include. | |
| 939 | (producer_is_gcc): Change return type to "int". | |
| 940 | * utils.c (producer_is_gcc): Change return type to int. | |
| 941 | Return 1 instead of true, and 0 instead of false. | |
| 942 | Adjust function documentation accordingly. | |
| 943 | ||
| 550bdf96 AA |
944 | 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 945 | ||
| 946 | * s390-linux-nat.c (have_regset_vxrs): New static variable. | |
| 947 | (s390_linux_fetch_inferior_registers): Handle vector registers, if | |
| 948 | present. | |
| 949 | (s390_linux_store_inferior_registers): Likewise. | |
| 950 | (s390_get_hwcap): Remove function. Embed its logic... | |
| 951 | (s390_read_description): ...here. Yield a target description with | |
| 952 | vector registers if applicable. | |
| 953 | * s390-linux-tdep.c: Include "features/s390-vx-linux64.c", | |
| 954 | "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and | |
| 955 | "features/s390x-tevx-linux64.c". | |
| 956 | (struct gdbarch_tdep) <v0_full_regnum>: New field. | |
| 957 | (s390_dwarf_regmap): Add vector registers. Remove bogus entries | |
| 958 | for "GNU/Linux-specific registers". | |
| 959 | (s390_dwarf_reg_r0l): New enum value. | |
| 960 | (s390_dwarf_reg_to_regnum): Support vector registers. | |
| 961 | (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers | |
| 962 | of GPR lower halves. | |
| 963 | (regnum_is_vxr_full): New function. | |
| 964 | (s390_register_name): New function. | |
| 965 | (s390_pseudo_register_name): Handle v0-v15, which are composed of | |
| 966 | f0-f15 and v0l-v15l. | |
| 967 | (s390_pseudo_register_type): Likewise. | |
| 968 | (s390_pseudo_register_read): Likewise. | |
| 969 | (s390_pseudo_register_write): Likewise. | |
| 970 | (s390_value_from_register): Account for the fact that values are | |
| 971 | placed left-justified in vector registers. | |
| 972 | (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to | |
| 973 | the vector reggroup and omit them from the general reggroup. | |
| 974 | (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps. | |
| 975 | (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets. | |
| 976 | (s390_iterate_over_regset_sections): Add iterations for the two | |
| 977 | new vector regsets. | |
| 978 | (s390_core_read_description): Yield a target description with | |
| 979 | vector registers if applicable. | |
| 980 | (s390_gdbarch_init): Handle target descriptions with vector | |
| 981 | registers. Add "register_name" gdbarch method. | |
| 982 | (_initialize_s390_tdep): Call new tdesc initialization functions. | |
| 983 | * s390-linux-tdep.h (HWCAP_S390_VX): New macro. | |
| 984 | (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM) | |
| 985 | (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM) | |
| 986 | (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM) | |
| 987 | (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM) | |
| 988 | (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM) | |
| 989 | (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM) | |
| 990 | (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM) | |
| 991 | (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM) | |
| 992 | (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM) | |
| 993 | (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM) | |
| 994 | (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM) | |
| 995 | (S390_V30_REGNUM, S390_V31_REGNUM): New macros. | |
| 996 | (S390_NUM_REGS): Adjust value. | |
| 997 | (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare. | |
| 998 | (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64) | |
| 999 | (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise. | |
| 1000 | * NEWS: Announce S/390 vector register support. | |
| 1001 | ||
| 446899e4 AA |
1002 | 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 1003 | ||
| 1004 | * features/s390-tevx-linux64.xml: New file. | |
| 1005 | * features/s390-vx-linux64.xml: New file. | |
| 1006 | * features/s390-vx.xml: New file. | |
| 1007 | * features/s390x-tevx-linux64.xml: New file. | |
| 1008 | * features/s390x-vx-linux64.xml: New file. | |
| 1009 | * features/Makefile (WHICH): Add s390-vx-linux64, | |
| 1010 | s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64. | |
| 1011 | (s390-vx-linux64-expedite, s390-tevx-linux64-expedite) | |
| 1012 | (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New | |
| 1013 | macros. | |
| 1014 | * features/s390-tevx-linux64.c: New generated file. | |
| 1015 | * features/s390-vx-linux64.c: Likewise. | |
| 1016 | * features/s390x-tevx-linux64.c: Likewise. | |
| 1017 | * features/s390x-vx-linux64.c: Likewise. | |
| 1018 | * regformats/s390-tevx-linux64.dat: Likewise. | |
| 1019 | * regformats/s390-vx-linux64.dat: Likewise. | |
| 1020 | * regformats/s390x-tevx-linux64.dat: Likewise. | |
| 1021 | * regformats/s390x-vx-linux64.dat: Likewise. | |
| 1022 | ||
| b7236fbe DE |
1023 | 2015-02-28 Doug Evans <xdje42@gmail.com> |
| 1024 | ||
| 1025 | * symtab.h (struct symtab) <next>: Fix comment. | |
| 1026 | ||
| 02e62830 SM |
1027 | 2015-02-27 Simon Marchi <simon.marchi@ericsson.com> |
| 1028 | ||
| 1029 | * python/python.c (python_GdbModuleDef): Rename GdbMethods to | |
| 1030 | python_GdbMethods. | |
| 1031 | ||
| bf36a1e7 PA |
1032 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1033 | ||
| 1034 | * dtrace-probe.c (dtrace_probe_ops): Make extern. | |
| 1035 | ||
| ad6aff7d PA |
1036 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1037 | ||
| 1038 | * common/common-exceptions.h (exception_none): Declare. | |
| 1039 | * common/common-exceptions.c (exception_none): Moved from | |
| 1040 | exceptions.c. | |
| 1041 | (exceptions_state_mc_init): Use exception_none. | |
| 1042 | * exceptions.c (exception_none): Move to | |
| 1043 | common/common-exceptions.c. | |
| 1044 | * exceptions.h (exception_none): Move to | |
| 1045 | common/common-exceptions.h. | |
| 1046 | ||
| 97c18565 PA |
1047 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1048 | ||
| 1049 | * main.c (catch_command_errors, catch_command_errors_const): | |
| 1050 | Remove 'mask' argument. Adjust. | |
| 1051 | (captured_main): Adjust callers. | |
| 1052 | ||
| e992c591 PA |
1053 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1054 | ||
| 1055 | * python/python-internal.h: Include "extension-priv.h". | |
| 1056 | ||
| 64166036 PA |
1057 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1058 | ||
| 1059 | * breakpoint.h (enum print_stop_action): Move further up in the | |
| 1060 | file. | |
| 1061 | ||
| 8a526fa6 PA |
1062 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1063 | ||
| 1064 | * gdbarch.sh: Include regcache.h. | |
| 1065 | * gdbarch.h: Regenerate. | |
| 1066 | ||
| 0fa9c223 PA |
1067 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1068 | ||
| 1069 | * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>: | |
| 1070 | Remove duplicate const. | |
| 1071 | * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove | |
| 1072 | duplicate const. | |
| 1073 | ||
| 7cf99fb1 PA |
1074 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1075 | ||
| 1076 | * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST. | |
| 1077 | * guile/guile.c (extension_language_guile): Use EXPORTED_CONST. | |
| 1078 | * features/feature_to_c.sh: Tag the generated xml_builtin array | |
| 1079 | with extern const in C++ mode. | |
| 1080 | ||
| 1424c16e TT |
1081 | 2015-02-27 Tom Tromey <tromey@redhat.com> |
| 1082 | ||
| 1083 | * minidebug.c (struct lzma_stream): Rename to ... | |
| 1084 | (struct gdb_lzma_stream): ... this. | |
| 1085 | (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust. | |
| 1086 | ||
| 10367c7c PA |
1087 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1088 | ||
| 1089 | * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New | |
| 1090 | function. | |
| 1091 | (mi_cmd_stack_list_locals, mi_cmd_stack_list_args) | |
| 1092 | (mi_cmd_stack_list_variables): Use it. | |
| 1093 | ||
| 4180215b PA |
1094 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1095 | ||
| 1096 | * x86-linux-nat.c (u_debugreg_offset): New function. | |
| 1097 | (x86_linux_dr_get, x86_linux_dr_set): Use it. | |
| 1098 | ||
| 2f56f7c3 PA |
1099 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1100 | ||
| 1101 | * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward | |
| 1102 | declaration. | |
| 1103 | Include break-common.h. | |
| 1104 | ||
| 570dc176 TT |
1105 | 2015-02-27 Tom Tromey <tromey@redhat.com> |
| 1106 | Pedro Alves <palves@redhat.com> | |
| 1107 | ||
| 1108 | * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for | |
| 1109 | local used to iterate over enums. | |
| 1110 | * completer.c (signal_completer): Likewise. | |
| 1111 | * i386-tdep.c (i386_stap_parse_special_token): Likewise. | |
| 1112 | * rs6000-tdep.c (powerpc_set_vector_abi): Likewise. | |
| 1113 | * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise. | |
| 1114 | * tui/tui-layout.c (next_layout, prev_layout): Likewise. | |
| 1115 | * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all) | |
| 1116 | (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise. | |
| 1117 | * tui-wingeneral.c (tui_refresh_all): Likewise. | |
| 1118 | ||
| 68c14faa PA |
1119 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1120 | ||
| 1121 | * target.h: Include "infrun.h". | |
| 1122 | ||
| 749bab01 PA |
1123 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1124 | ||
| 1125 | * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP. | |
| 1126 | ||
| 3c14e5a3 PA |
1127 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1128 | ||
| 1129 | * common/agent.h (IPA_SYM_EXPORTED_NAME): New. | |
| 1130 | (IPA_SYM): Use it. | |
| 1131 | * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros. | |
| 1132 | ||
| 56000a98 PA |
1133 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1134 | ||
| 1135 | * cli-out.c (_rl_erase_entire_line): Move declaration out of | |
| 1136 | cli_mld_erase_entire_line, and make it extern "C". | |
| 1137 | * common/common-defs.h (EXTERN_C): New. | |
| 1138 | * completer.c (_rl_completion_prefix_display_length) | |
| 1139 | (_rl_print_completions_horizontally, QSFUNC): Move declarations | |
| 1140 | out of gdb_display_match_list_1. | |
| 1141 | (_rl_qsort_string_compare): Move declaration out of | |
| 1142 | gdb_display_match_list_1, and make it extern "C". | |
| 1143 | * defs.h (re_comp): Use EXTERN_C. | |
| 1144 | * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper, | |
| 1145 | and make it extern "C". | |
| 1146 | (monstartup): Move declaration out of maintenance_set_profile_cmd, | |
| 1147 | and make it extern "C". | |
| 1148 | (main): Move declaration out of maintenance_set_profile_cmd. | |
| 1149 | * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use | |
| 1150 | EXTERN_C. | |
| 1151 | ||
| bcabf420 PA |
1152 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1153 | ||
| 1154 | * python/python.c (GdbMethods): Rename to ... | |
| 1155 | (python_GdbMethods): ... this and make extern. | |
| 1156 | (GdbModuleDef): Rename to ... | |
| 1157 | (python_GdbModuleDef): ... this and make extern. | |
| 1158 | ||
| 928dbe07 PA |
1159 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1160 | ||
| 1161 | * record-btrace.c (set_record_btrace_cmdlist) | |
| 1162 | (show_record_btrace_cmdlist): Remove redefinitions. | |
| 1163 | ||
| 52059ffd TT |
1164 | 2015-02-27 Tom Tromey <tromey@redhat.com> |
| 1165 | Pedro Alves <palves@redhat.com> | |
| 1166 | ||
| 1167 | * dwarf2-frame.c (enum cfa_how_kind, struct | |
| 1168 | dwarf2_frame_state_reg_info): Move out of struct | |
| 1169 | dwarf2_frame_state. | |
| 1170 | * dwarf2read.c (struct tu_stats): Move out of struct | |
| 1171 | dwarf2_per_objfile. | |
| 1172 | (struct file_entry): Move out of struct line_header. | |
| 1173 | (struct nextfield, struct nextfnfield, struct fnfieldlist, struct | |
| 1174 | typedef_field_list): Move out of struct field_info. | |
| 1175 | * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data): | |
| 1176 | Move out of struct dynamic_prop. | |
| 1177 | (union type_owner, union field_location, struct field, struct | |
| 1178 | range_bounds, union type_specific): Move out of struct main_type. | |
| 1179 | (struct fn_fieldlist, struct fn_field, struct typedef_field) | |
| 1180 | (VOFFSET_STATIC): Move out of struct cplus_struct_type. | |
| 1181 | (struct call_site_target, union call_site_parameter_u, struct | |
| 1182 | call_site_parameter): Move out of struct call_site. | |
| 1183 | * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct | |
| 1184 | m32c_prologue. | |
| 1185 | (enum srcdest_kind): Move out of struct srcdest. | |
| 1186 | * main.c (enum cmdarg_kind): Move out of struct cmdarg. | |
| 1187 | * prologue-value.h (enum prologue_value_kind): Move out of struct | |
| 1188 | prologue_value. | |
| 1189 | * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct | |
| 1190 | gdbarch_tdep. | |
| 1191 | * stabsread.c (struct nextfield, struct next_fnfieldlist): Move | |
| 1192 | out of struct field_info. | |
| 1193 | * symfile.h (struct other_sections): Move out of struct | |
| 1194 | section_addr_info. | |
| 1195 | * symtab.c (struct symbol_cache_slot): Move out struct | |
| 1196 | block_symbol_cache. | |
| 1197 | * target-descriptions.c (enum tdesc_type_kind): Move out of | |
| 1198 | typedef struct tdesc_type. | |
| 1199 | * tui/tui-data.h (enum tui_line_or_address_kind): Move out of | |
| 1200 | struct tui_line_or_address. | |
| 1201 | * value.c (enum internalvar_kind, union internalvar_data): Move | |
| 1202 | out of struct internalvar. | |
| 1203 | * xtensa-tdep.h (struct ctype_cache): Move out of struct | |
| 1204 | gdbarch_tdep. | |
| 1205 | ||
| fe978cb0 PA |
1206 | 2015-02-27 Tom Tromey <tromey@redhat.com> |
| 1207 | Pedro Alves <palves@redhat.com> | |
| 1208 | ||
| 1209 | Rename symbols whose names are reserved C++ keywords throughout. | |
| 1210 | ||
| 3bc3d82a PA |
1211 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1212 | ||
| 1213 | * Makefile.in (COMPILER): New, get it from autoconf. | |
| 1214 | (COMPILE.pre, CC_LD): Use COMPILER. | |
| 1215 | (CXX): Get from autoconf instead. | |
| 1216 | (CXX_FOR_TARGET): Default to g++ instead of gcc. | |
| 1217 | * acinclude.m4: Include build-with-cxx.m4. | |
| 1218 | * build-with-cxx.m4: New file. | |
| 1219 | * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX. | |
| 1220 | Disable -Werror by default if building in C++ mode. | |
| 1221 | (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and | |
| 1222 | -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode. | |
| 1223 | Run supported-warning-flags tests with the C++ compiler. | |
| 1224 | Save/restore CXXFLAGS too. | |
| 1225 | * configure: Regenerate. | |
| 1226 | ||
| 07697489 PA |
1227 | 2015-02-27 Pedro Alves <palves@redhat.com> |
| 1228 | ||
| 1229 | * libiberty.m4: New file. | |
| 1230 | * acinclude.m4: Include libiberty.m4. | |
| 1231 | * configure.ac: Call libiberty_INIT. | |
| 1232 | * config.in, configure: Regenerate. | |
| 1233 | ||
| 60abeae4 AA |
1234 | 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 1235 | ||
| 1236 | * s390-linux-tdep.c (s390_gcc_target_options): Not just handle | |
| 1237 | 31-bit targets, but 64-bit targets as well. | |
| 1238 | (s390_gnu_triplet_regexp): New function. | |
| 1239 | (s390_gdbarch_init): Set the gcc_target_options gdbarch method for | |
| 1240 | 64-bit targets as well. Set the gnu_triplet_regexp gdbarch | |
| 1241 | method. | |
| 1242 | ||
| f44466fb | 1243 | 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch) |
| f0666312 JT |
1244 | |
| 1245 | * windows-nat.c (CONTEXT_DEBUGGER): Remove. | |
| 1246 | (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags | |
| 1247 | from CONTEXT_DEBUGGER. | |
| 1248 | ||
| 0def5aaa DE |
1249 | 2015-02-26 Doug Evans <dje@google.com> |
| 1250 | ||
| 1251 | * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to | |
| 1252 | CHECK_TYPEDEF. | |
| 1253 | (set_type_vptr_fieldno): Ditto. | |
| 1254 | (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto. | |
| 1255 | * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto. | |
| 1256 | ||
| 77b64a49 PA |
1257 | 2015-02-26 Pedro Alves <palves@redhat.com> |
| 1258 | ||
| 1259 | * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF. | |
| 1260 | * complaints.c (vcomplaint): Pass argument FMT directly to | |
| 1261 | printf-like functions instead of complaint->fmt. | |
| 1262 | * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF. | |
| 1263 | * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF. | |
| 1264 | * compile/compile-loc2c.c (pushf, unary, binary): Add | |
| 1265 | ATTRIBUTE_PRINTF. | |
| 1266 | (do_compile_dwarf_expr_to_c): Pass string literal as format string | |
| 1267 | to pushf. | |
| 1268 | (BINARY): Pass string literal as format string to 'binary'. | |
| 1269 | * compile/compile-object-load.c (link_callbacks_einfo): Add | |
| 1270 | ATTRIBUTE_PRINTF. | |
| 1271 | * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF. | |
| 1272 | ||
| 532f44ed PA |
1273 | 2015-02-26 Pedro Alves <palves@redhat.com> |
| 1274 | ||
| 1275 | * windows-termcap.c: Rename to ... | |
| 1276 | * stub-termcap.c: ... this. Adjust header line. | |
| 1277 | * Makefile.in (SFILES): Refer to stub-termcap.c instead of | |
| 1278 | windows-termcap.c. | |
| 1279 | * configure: Regenerate. | |
| 1280 | * configure.ac: Refer to stub-termcap.o instead of | |
| 1281 | windows-termcap.o. | |
| 1282 | * gdb_curses.h: Mention stub-termcap.c instead of | |
| 1283 | windows-termcap.c. | |
| 1284 | ||
| 081a1c2c JK |
1285 | 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1286 | ||
| 1287 | * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym) | |
| 1288 | (gcc_symbol_address): Call gnu_ifunc_resolve_addr. | |
| 1289 | ||
| 2f41223f AT |
1290 | 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| 1291 | ||
| 1292 | * gdb/infcmd.c (print_return_value): use type_to_string to print type. | |
| 1293 | ||
| 80c57053 JK |
1294 | 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1295 | ||
| 1296 | * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for | |
| 1297 | bfd_canonicalize_symtab. | |
| 1298 | ||
| cf424aef JB |
1299 | 2015-02-25 John Baldwin <jhb@FreeBSD.org> |
| 1300 | ||
| 1301 | * amd64fbsd-nat.c: Include sys/user.h. | |
| 1302 | (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl | |
| 1303 | instead of KERN_PS_STRINGS to locate the signal trampoline. | |
| 1304 | * i386fbsd-nat.c: Include sys/user.h. | |
| 1305 | (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl | |
| 1306 | instead of KERN_PS_STRINGS to locate the signal trampoline. | |
| 1307 | * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New. | |
| 1308 | (amd64fbsd_sigtramp_p): New. | |
| 1309 | (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No | |
| 1310 | longer set default values. | |
| 1311 | (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p". | |
| 1312 | * i386fbsd-tdep.c (i386fbsd_sigtramp_start) | |
| 1313 | (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end) | |
| 1314 | (i386fbsd_freebsd4_sigtramp_start) | |
| 1315 | (i386fbsd_freebsd4_sigtramp_middle) | |
| 1316 | (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start) | |
| 1317 | (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New. | |
| 1318 | (i386fbsd_sigtramp_p): New. | |
| 1319 | (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No | |
| 1320 | longer set default values. | |
| 1321 | (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p". | |
| 1322 | ||
| c5cb74ee JB |
1323 | 2015-02-25 John Baldwin <jhb@freebsd.org> |
| 1324 | ||
| 1325 | * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use | |
| 1326 | get_frame_register instead of frame_unwind_register_unsigned. | |
| 1327 | ||
| 17487d85 JK |
1328 | 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1329 | ||
| 1330 | PR build/18033 | |
| 1331 | * compile/compile-c-support.c (c_compute_program): Change // comment. | |
| 1332 | * compile/compile-object-load.c (setup_sections): Change // comment. | |
| 1333 | ||
| 9357a9e6 JB |
1334 | 2015-02-26 Joel Brobecker <brobecker@adacore.com> |
| 1335 | ||
| 1336 | PR build/18033: | |
| 1337 | * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment. | |
| 1338 | ||
| 1f10ba14 PA |
1339 | 2015-02-23 Pedro Alves <palves@redhat.com> |
| 1340 | ||
| 1341 | * remote.c (skip_to_semicolon): New function. | |
| 1342 | (remote_parse_stop_reply) <T stop reply>: Use it. Don't | |
| 1343 | special case the stop reasons that look like hex numbers | |
| 1344 | upfront. Instead handle real register numbers after matching | |
| 1345 | all the known stop reasons. | |
| 1346 | ||
| 96553a0c DE |
1347 | 2015-02-21 Doug Evans <dje@google.com> |
| 1348 | ||
| 1349 | PR c++/17976, symtab/17821 | |
| 1350 | * cp-namespace.c (cp_search_static_and_baseclasses): New parameter | |
| 1351 | is_in_anonymous. All callers updated. | |
| 1352 | (find_symbol_in_baseclass): Ditto. | |
| 1353 | (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks | |
| 1354 | for symbols in an anonymous namespace. | |
| 1355 | * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch | |
| 1356 | DW_AT_name directly. | |
| 1357 | (dwarf2_name): Convert missing namespace name to | |
| 1358 | CP_ANONYMOUS_NAMESPACE_STR. | |
| 1359 | ||
| 2db9a427 PA |
1360 | 2015-02-20 Pedro Alves <palves@redhat.com> |
| 1361 | ||
| 1362 | * linux-nat.c (linux_handle_extended_wait): Call | |
| 1363 | thread_db_notice_clone whenever a new clone LWP is detected. | |
| 1364 | (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New | |
| 1365 | functions. | |
| 1366 | * linux-nat.h (thread_db_attach_lwp): Delete declaration. | |
| 1367 | (thread_db_notice_clone, linux_stop_and_wait_all_lwps) | |
| 1368 | (linux_unstop_all_lwps): Declare. | |
| 1369 | * linux-thread-db.c (struct thread_get_info_inout): Delete. | |
| 1370 | (thread_get_info_callback): Delete. | |
| 1371 | (thread_from_lwp): Use td_thr_get_info and record_thread. | |
| 1372 | (thread_db_attach_lwp): Delete. | |
| 1373 | (thread_db_notice_clone): New function. | |
| 1374 | (try_thread_db_load_1): If /proc is mounted and shows the | |
| 1375 | process'es task list, walk over all LWPs and call thread_from_lwp | |
| 1376 | instead of relying on td_ta_thr_iter. | |
| 1377 | (attach_thread): Don't call check_thread_signals here. Split the | |
| 1378 | tail part of the function (which adds the thread to the core GDB | |
| 1379 | thread list) to ... | |
| 1380 | (record_thread): ... this function. Call check_thread_signals | |
| 1381 | here. | |
| 1382 | (thread_db_wait): Don't call thread_db_find_new_threads_1. Always | |
| 1383 | call thread_from_lwp. | |
| 1384 | (thread_db_update_thread_list): Rename to ... | |
| 1385 | (thread_db_update_thread_list_org): ... this. | |
| 1386 | (thread_db_update_thread_list): New function. | |
| 1387 | (thread_db_find_thread_from_tid): Delete. | |
| 1388 | (thread_db_get_ada_task_ptid): Simplify. | |
| 1389 | * nat/linux-procfs.c: Include <sys/stat.h>. | |
| 1390 | (linux_proc_task_list_dir_exists): New function. | |
| 1391 | * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare. | |
| 1392 | ||
| 3b27ef47 PA |
1393 | 2015-02-20 Pedro Alves <palves@redhat.com> |
| 1394 | ||
| 1395 | * linux-nat.c (lin_lwp_attach_lwp): No longer special case the | |
| 1396 | main LWP. Handle the case of waitpid returning 0 if we're already | |
| 1397 | attached to the LWP. Don't set the LWP's last_resume_kind to | |
| 1398 | resume_stop if we already knew about the LWP. | |
| 1399 | (linux_nat_filter_event): Add debug logs. | |
| 1400 | ||
| 1cc28231 PA |
1401 | 2015-02-20 Pedro Alves <palves@redhat.com> |
| 1402 | ||
| 1403 | * target.h (forward_target_decr_pc_after_break): Delete | |
| 1404 | declaration. | |
| 1405 | ||
| 5c5019c2 PA |
1406 | 2015-02-20 Pedro Alves <palves@redhat.com> |
| 1407 | ||
| 1408 | PR threads/18006 | |
| 1409 | * linux-thread-db.c (thread_get_info_callback): Return early if | |
| 1410 | the thread's lwp id is -1. | |
| 1411 | ||
| f3978e91 JB |
1412 | 2015-02-20 Joel Brobecker <brobecker@adacore.com> |
| 1413 | ||
| 1414 | GDB 7.9 released. | |
| 1415 | ||
| ffdf88ec SE |
1416 | 2015-02-19 Steve Ellcey <sellcey@imgtec.com> |
| 1417 | ||
| 1418 | * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr. | |
| 1419 | (dtrace_get_probes) Change type of variable 'dof'. | |
| 1420 | ||
| c9587f88 AT |
1421 | 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| 1422 | ||
| 1423 | PR breakpoints/16812 | |
| 1424 | * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV. | |
| 1425 | * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add. | |
| 1426 | * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint. | |
| 1427 | ||
| 53cf2ee0 DT |
1428 | 2015-02-19 David Taylor <dtaylor@emc.com> |
| 1429 | ||
| 1430 | * common/ax.def (setv): Fix consumed entry in setv DEFOP. | |
| 1431 | ||
| acfe0940 PP |
1432 | 2015-02-18 Patrick Palka <patrick@parcs.ath.cx> |
| 1433 | ||
| 1434 | * tui/tui-io.c (tui_handle_resize_during_io): Remove this | |
| 1435 | function. | |
| 1436 | (tui_putc): Don't call tui_handle_resize_during_io. | |
| 1437 | (tui_getc): Likewise. | |
| 1438 | (tui_mld_getc): Likewise. | |
| 1439 | * tui/tui-win.c: Include event-loop.h and tui/tui-io.h. | |
| 1440 | (tui_sigwinch_token): New static variable. | |
| 1441 | (tui_initialize_win): Adjust documentation. Set | |
| 1442 | tui_sigwinch_token. | |
| 1443 | (tui_async_resize_screen): New asynchronous callback. | |
| 1444 | (tui_sigwinch_handler): Adjust documentation. Asynchronously | |
| 1445 | invoke tui_async_resize_screen. | |
| 1446 | ||
| f6a88844 JM |
1447 | 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1448 | ||
| 1449 | * configure: Regenerated. | |
| 1450 | * configure.ac: Use GDB_AC_TRANSFORM. | |
| 1451 | * Makefile.in (aclocal_m4_deps): Added transform.m4. | |
| 1452 | * acinclude.m4: sinclude transform.m4. | |
| 1453 | * transform.m4: New file. | |
| 1454 | (GDB_AC_TRANSFORM): New macro. | |
| 1455 | ||
| b05e3b0d JM |
1456 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1457 | ||
| 1458 | * NEWS: Announce the support for DTrace SDT probes. | |
| 1459 | ||
| c3e3045e JM |
1460 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1461 | ||
| 1462 | * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h". | |
| 1463 | (amd64_dtrace_parse_probe_argument): New function. | |
| 1464 | (amd64_dtrace_probe_is_enabled): Likewise. | |
| 1465 | (amd64_dtrace_enable_probe): Likewise. | |
| 1466 | (amd64_dtrace_disable_probe): Likewise. | |
| 1467 | (amd64_linux_init_abi): Register the | |
| 1468 | `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe', | |
| 1469 | `gdbarch_dtrace_disable_probe' and | |
| 1470 | `gdbarch_dtrace_probe_is_enabled' hooks. | |
| 1471 | (amd64_dtrace_disabled_probe_sequence_1): New constant. | |
| 1472 | (amd64_dtrace_disabled_probe_sequence_2): Likewise. | |
| 1473 | (amd64_dtrace_enable_probe_sequence): Likewise. | |
| 1474 | (amd64_dtrace_disable_probe_sequence): Likewise. | |
| 1475 | ||
| d4777acb JM |
1476 | 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1477 | ||
| 1478 | * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention | |
| 1479 | the -probe-dtrace new vpossible value for PROBE_MODIFIER. | |
| 1480 | * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can | |
| 1481 | handle ELF files. | |
| 1482 | * Makefile.in (SFILES): dtrace-probe.c added. | |
| 1483 | * configure: Regenerate. | |
| 1484 | * dtrace-probe.c: New file. | |
| 1485 | (SHT_SUNW_dof): New constant. | |
| 1486 | (dtrace_probe_type): New enum. | |
| 1487 | (dtrace_probe_arg): New struct. | |
| 1488 | (dtrace_probe_arg_s): New typedef. | |
| 1489 | (struct dtrace_probe_enabler): New struct. | |
| 1490 | (dtrace_probe_enabler_s): New typedef. | |
| 1491 | (dtrace_probe): New struct. | |
| 1492 | (dtrace_probe_is_linespec): New function. | |
| 1493 | (dtrace_dof_sect_type): New enum. | |
| 1494 | (dtrace_dof_dofh_ident): Likewise. | |
| 1495 | (dtrace_dof_encoding): Likewise. | |
| 1496 | (DTRACE_DOF_ENCODE_LSB): Likewise. | |
| 1497 | (DTRACE_DOF_ENCODE_MSB): Likewise. | |
| 1498 | (dtrace_dof_hdr): New struct. | |
| 1499 | (dtrace_dof_sect): Likewise. | |
| 1500 | (dtrace_dof_provider): Likewise. | |
| 1501 | (dtrace_dof_probe): Likewise. | |
| 1502 | (DOF_UINT): New macro. | |
| 1503 | (DTRACE_DOF_PTR): Likewise. | |
| 1504 | (DTRACE_DOF_SECT): Likewise. | |
| 1505 | (dtrace_process_dof_probe): New function. | |
| 1506 | (dtrace_process_dof): Likewise. | |
| 1507 | (dtrace_build_arg_exprs): Likewise. | |
| 1508 | (dtrace_get_arg): Likewise. | |
| 1509 | (dtrace_get_probes): Likewise. | |
| 1510 | (dtrace_get_probe_argument_count): Likewise. | |
| 1511 | (dtrace_can_evaluate_probe_arguments): Likewise. | |
| 1512 | (dtrace_evaluate_probe_argument): Likewise. | |
| 1513 | (dtrace_compile_to_ax): Likewise. | |
| 1514 | (dtrace_probe_destroy): Likewise. | |
| 1515 | (dtrace_gen_info_probes_table_header): Likewise. | |
| 1516 | (dtrace_gen_info_probes_table_values): Likewise. | |
| 1517 | (dtrace_probe_is_enabled): Likewise. | |
| 1518 | (dtrace_probe_ops): New variable. | |
| 1519 | (info_probes_dtrace_command): New function. | |
| 1520 | (_initialize_dtrace_probe): Likewise. | |
| 1521 | (dtrace_type_name): Likewise. | |
| 1522 | ||
| 8b367e17 JM |
1523 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1524 | ||
| 1525 | * gdbarch.sh (dtrace_parse_probe_argument): New. | |
| 1526 | (dtrace_probe_is_enabled): Likewise. | |
| 1527 | (dtrace_enable_probe): Likewise. | |
| 1528 | (dtrace_disable_probe): Likewise. | |
| 1529 | * gdbarch.c: Regenerate. | |
| 1530 | * gdbarch.h: Regenerate. | |
| 1531 | ||
| 9aca2ff8 JM |
1532 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1533 | ||
| 1534 | * stap-probe.c (stap_probe_ops): Add NULLs in the static | |
| 1535 | stap_probe_ops for `enable_probe' and `disable_probe'. | |
| 1536 | * probe.c (enable_probes_command): New function. | |
| 1537 | (disable_probes_command): Likewise. | |
| 1538 | (_initialize_probe): Define the cli commands `enable probe' and | |
| 1539 | `disable probe'. | |
| 1540 | (parse_probe_linespec): New function. | |
| 1541 | (info_probes_for_ops): Use parse_probe_linespec. | |
| 1542 | * probe.h (probe_ops): New hooks `enable_probe' and | |
| 1543 | `disable_probe'. | |
| 1544 | ||
| 03e98035 JM |
1545 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1546 | ||
| 1547 | * probe.c (compute_probe_arg): Moved from stap-probe.c | |
| 1548 | (compile_probe_arg): Likewise. | |
| 1549 | (probe_funcs): Likewise. | |
| 1550 | * stap-probe.c (compute_probe_arg): Moved to probe.c. | |
| 1551 | (compile_probe_arg): Likewise. | |
| 1552 | (probe_funcs): Likewise. | |
| 1553 | ||
| 6f9b8491 JM |
1554 | 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| 1555 | ||
| 1556 | * probe.c (print_ui_out_not_applicables): New function. | |
| 1557 | (exists_probe_with_pops): Likewise. | |
| 1558 | (info_probes_for_ops): Do not include column headers for probe | |
| 1559 | types for which no probe has been actually found on any object. | |
| 1560 | Also invoke `print_ui_out_not_applicables' in order to match the | |
| 1561 | column rows with the header when probes of several types are | |
| 1562 | listed. | |
| 1563 | Print the "Type" column. | |
| 1564 | * probe.h (probe_ops): Added a new probe operation `type_name'. | |
| 1565 | * stap-probe.c (stap_probe_ops): Add `stap_type_name'. | |
| 1566 | (stap_type_name): New function. | |
| 1567 | ||
| 69efdff1 PP |
1568 | 2015-02-17 Patrick Palka <patrick@parcs.ath.cx> |
| 1569 | ||
| 1570 | * tui/tui-io.c (tui_getc): Don't call key_is_command_char. | |
| 1571 | (key_is_command_char): Delete. | |
| 1572 | ||
| f8e5e23e PA |
1573 | 2015-02-17 Pedro Alves <palves@redhat.com> |
| 1574 | ||
| 1575 | * tui/tui.c (tui_enable): Resize windows before anything | |
| 1576 | might show a window. | |
| 1577 | ||
| 9f2e0721 MO |
1578 | 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com> |
| 1579 | ||
| 1580 | PR gdb/17984 | |
| 1581 | * aarch64-linux-nat.c: Don't include features/aarch64.c anymore. | |
| 1582 | (aarch64_linux_read_description): Remove initialize_tdesc_aarch64 | |
| 1583 | call. | |
| 1584 | * aarch64-tdep.h (tdesc_aarch64): Declare. | |
| 1585 | ||
| 171e6b1c MW |
1586 | 2015-02-12 Mark Wielaard <mjw@redhat.com> |
| 1587 | ||
| 1588 | * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false". | |
| 1589 | ||
| d5ff0482 DE |
1590 | 2015-02-13 Doug Evans <dje@google.com> |
| 1591 | ||
| 1592 | * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter | |
| 1593 | anonymous_namespace to is_in_anonymous for consistency with the rest | |
| 1594 | of the file. | |
| 1595 | (cp_lookup_bare_symbol): Fix typo in comment. | |
| 1596 | (cp_search_static_and_baseclasses): Ditto. | |
| 1597 | (search_symbol_list): Use vertical space in comment better. | |
| 1598 | (reset_directive_searched): Ditto. Fix typo. | |
| 1599 | (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter. | |
| 1600 | ||
| 9f04ac5f YQ |
1601 | 2015-02-13 Yao Qi <yao.qi@arm.com> |
| 1602 | ||
| 1603 | * MAINTAINERS: Update my email address. | |
| 1604 | ||
| 013d0319 DE |
1605 | 2015-02-12 Doug Evans <dje@google.com> |
| 1606 | ||
| b615dd20 | 1607 | * symtab.c (completion_list_add_name): Fix memory leak. |
| 013d0319 | 1608 | |
| 9a7e538e DE |
1609 | 2015-02-12 Doug Evans <dje@google.com> |
| 1610 | ||
| 1611 | * completer.c (complete_line): Remove incorrect comment. | |
| 1612 | ||
| e1fcd575 JK |
1613 | 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1614 | ||
| 1615 | * python/py-framefilter.c (py_print_single_arg, enumerate_locals) | |
| 1616 | (py_print_frame): Use RETURN_MASK_ERROR. | |
| 1617 | ||
| b99bf4e3 JK |
1618 | 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1619 | ||
| 1620 | * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in | |
| 1621 | function comment. Wrap all function that can throw in cleanups. | |
| 1622 | (gdbpy_apply_frame_filter): Wrap all function that can throw in | |
| 1623 | cleanups. | |
| 1624 | ||
| 800eb1ce JK |
1625 | 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1626 | ||
| 1627 | * python/py-framefilter.c (py_print_frame): Substitute goto error. | |
| 1628 | Remove the error label. | |
| 1629 | ||
| 34019068 JK |
1630 | 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1631 | ||
| 1632 | * python/py-framefilter.c (py_print_frame): Put conditional code paths | |
| 1633 | with goto first, indent the former else codepath left. Put variable | |
| 1634 | 'elided' to a new inner block. | |
| 1635 | ||
| 8d4a54e2 JK |
1636 | 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 1637 | ||
| 1638 | * python/py-framefilter.c (py_print_frame): Whitespacing fixes. | |
| 1639 | ||
| 18ad82c1 PA |
1640 | 2015-02-11 Pedro Alves <palves@redhat.com> |
| 1641 | ||
| 1642 | * xcoffread.c (within_function): Delete. | |
| 1643 | ||
| e36122e9 TT |
1644 | 2015-02-11 Tom Tromey <tromey@redhat.com> |
| 1645 | Pedro Alves <palves@redhat.com> | |
| 1646 | ||
| 1647 | * breakpoint.c (base_breakpoint_ops): Delete. | |
| 1648 | * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern. | |
| 1649 | * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern. | |
| 1650 | * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern. | |
| 1651 | * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern. | |
| 1652 | * python/py-arch.c (arch_object_type): Make extern. | |
| 1653 | * python/py-block.c (block_syms_iterator_object_type): Make extern. | |
| 1654 | * python/py-bpevent.c (breakpoint_event_object_type): Make extern. | |
| 1655 | * python/py-cmd.c (cmdpy_object_type): Make extern. | |
| 1656 | * python/py-continueevent.c (continue_event_object_type) | |
| 1657 | * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual' | |
| 1658 | parameter. Update all callers. | |
| 1659 | * python/py-evtregistry.c (eventregistry_object_type): Make extern. | |
| 1660 | * python/py-exitedevent.c (exited_event_object_type): Make extern. | |
| 1661 | * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern. | |
| 1662 | * python/py-function.c (fnpy_object_type): Make extern. | |
| 1663 | * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern. | |
| 1664 | * python/py-infevents.c (call_pre_event_object_type) | |
| 1665 | (inferior_call_post_event_object_type). | |
| 1666 | (memory_changed_event_object_type): Make extern. | |
| 1667 | * python/py-infthread.c (thread_object_type): Make extern. | |
| 1668 | * python/py-lazy-string.c (lazy_string_object_type): Make extern. | |
| 1669 | * python/py-linetable.c (linetable_entry_object_type) | |
| 1670 | (linetable_object_type, ltpy_iterator_object_type): Make extern. | |
| 1671 | * python/py-newobjfileevent.c (new_objfile_event_object_type) | |
| 1672 | (clear_objfiles_event_object_type): Make extern. | |
| 1673 | * python/py-objfile.c (objfile_object_type): Make extern. | |
| 1674 | * python/py-param.c (parmpy_object_type): Make extern. | |
| 1675 | * python/py-progspace.c (pspace_object_type): Make extern. | |
| 1676 | * python/py-signalevent.c (signal_event_object_type): Make extern. | |
| 1677 | * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern. | |
| 1678 | * python/py-type.c (type_object_type, field_object_type) | |
| 1679 | (type_iterator_object_type): Make extern. | |
| 1680 | * python/python.c (python_extension_script_ops) | |
| 1681 | (python_extension_ops): Make extern. | |
| 1682 | * stap-probe.c (stap_probe_ops): Make extern. | |
| 1683 | ||
| 0703599a PA |
1684 | 2015-02-11 Pedro Alves <pedro@codesourcery.com> |
| 1685 | ||
| 1686 | * infrun.c (adjust_pc_after_break): Don't adjust the PC just | |
| 1687 | because the event thread is not the current thread. | |
| 1688 | ||
| eaaf76ab DE |
1689 | 2015-02-11 Doug Evans <xdje42@gmail.com> |
| 1690 | ||
| 1691 | * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't | |
| 1692 | been initialized yet, return NULL. | |
| 1693 | ||
| e7d52ed3 DE |
1694 | 2015-02-11 Doug Evans <dje@google.com> |
| 1695 | ||
| 1696 | * symfile.h (new_symfile_objfile): Delete. | |
| 1697 | * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile. | |
| 1698 | All callers updated. | |
| 1699 | ||
| fc6b1256 PP |
1700 | 2015-02-11 Patrick Palka <patrick@parcs.ath.cx> |
| 1701 | ||
| 1702 | * tui/tui-io.c (tui_handle_resize_during_io): Call | |
| 1703 | tui_update_gdb_sizes() after resizing the screen. | |
| 1704 | * tui/tui.c (tui_enable): Resize the terminal before | |
| 1705 | calling tui_update_gdb_sizes(). | |
| 1706 | ||
| d9080678 PP |
1707 | 2015-02-11 Patrick Palka <patrick@parcs.ath.cx> |
| 1708 | ||
| 1709 | * tui/tui-io.c (tui_getc): Move cursor to the end of the command | |
| 1710 | line before printing a newline. | |
| 1711 | ||
| 9f615e3a MW |
1712 | 2015-02-11 Mark Wielaard <mjw@redhat.com> |
| 1713 | ||
| 1714 | * utils.c (producer_is_gcc): Return true or false. | |
| 1715 | ||
| d9080678 | 1716 | 2015-02-10 Mark Wielaard <mjw@redhat.com> |
| b1ffba5a MW |
1717 | |
| 1718 | * utils.h (producer_is_gcc): Change return type to bool. Add major | |
| 1719 | argument. | |
| 1720 | * utils.c (producer_is_gcc): Likewise. | |
| 1721 | (producer_is_gcc_ge_4): Adjust producer_is_gcc call. | |
| 1722 | * dwarf2read.c (check_producer): Likewise. | |
| 1723 | ||
| b052c4fb PA |
1724 | 2015-02-10 Pedro Alves <palves@redhat.com> |
| 1725 | ||
| 1726 | * infrun.c (displaced_step_fixup): Switch to the event thread | |
| 1727 | before calling gdbarch_displaced_step_fixup. | |
| 1728 | ||
| 3ac240d4 AT |
1729 | 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com> |
| 1730 | ||
| 1731 | * MAINTAINERS (Write After Approval): Add Antoine Tremblay. | |
| 1732 | ||
| c1cc6152 SM |
1733 | 2015-02-10 Simon Marchi <simon.marchi@ericsson.com> |
| 1734 | ||
| 1735 | * ada-varobj.c (ada_name_of_child): Constify parent. | |
| 1736 | (ada_path_expr_of_child): Same. | |
| 1737 | (ada_value_of_child): Same. | |
| 1738 | (ada_type_of_child): Same. | |
| 1739 | * c-varobj.c (c_is_path_expr_parent): Same. | |
| 1740 | (c_describe_child): Same. | |
| 1741 | (c_name_of_child): Same. | |
| 1742 | (c_value_of_child): Same. | |
| 1743 | (c_type_of_child): Same. | |
| 1744 | (cplus_number_of_children): Same. | |
| 1745 | (cplus_describe_child): Constify var. | |
| 1746 | (cplus_name_of_child): Constify parent. | |
| 1747 | (cplus_value_of_child): Same. | |
| 1748 | (cplus_type_of_child): Same. | |
| 1749 | * jv-varobj.c (java_name_of_child): Same. | |
| 1750 | (java_value_of_child): Same. | |
| 1751 | (java_type_of_child): Same. | |
| 1752 | * varobj.c (value_of_child): Same. | |
| 1753 | (varobj_default_is_path_expr_parent): Constify var, parent and return | |
| 1754 | value. | |
| 1755 | (varobj_get_path_expr): Constify var, modify path_expr through | |
| 1756 | mutable_var. | |
| 1757 | (install_new_value): Constify parent. | |
| 1758 | (value_of_child): Constify parent. | |
| 1759 | * varobj.h (struct varobj): Constify parent. | |
| 1760 | (struct lang_varobj_ops): Constify name_of_child, value_of_child and | |
| 1761 | type_of_child. | |
| 1762 | (varobj_get_path_expr): Constify var. | |
| 1763 | (varobj_get_path_expr_parent): Constify var and return value. | |
| 1764 | ||
| c1ee9414 LM |
1765 | 2015-02-10 Luis Machado <lgustavo@codesourcery.com> |
| 1766 | ||
| 1767 | * arm-tdep.c (arm_prologue_unwind_stop_reason): New function. | |
| 1768 | (arm_prologue_this_id): Move PC and SP limit checks to | |
| 1769 | arm_prologue_unwind_stop_reason. | |
| 1770 | (arm_prologue_unwind) <stop_reason> : Set to | |
| 1771 | arm_prologue_unwind_stop_reason. | |
| 1772 | ||
| f7de9aab MW |
1773 | 2015-02-09 Mark Wielaard <mjw@redhat.com> |
| 1774 | ||
| 1775 | * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and | |
| 1776 | DW_LANG_Fortran08 as language_fortran. | |
| 1777 | ||
| 0b24eb2d SDJ |
1778 | 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com> |
| 1779 | ||
| 1780 | PR remote/17946 | |
| 1781 | * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison | |
| 1782 | of pointer against char. | |
| 1783 | ||
| a2c2acaf MW |
1784 | 2015-02-09 Mark Wielaard <mjw@redhat.com> |
| 1785 | ||
| 1786 | * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'. | |
| 1787 | (c_type_print_modifier): Likewise. | |
| 1788 | * dwarf2read.c (read_tag_atomic_type): New function. | |
| 1789 | (read_type_die_1): Handle DW_TAG_atomic_type. | |
| 1790 | * gdbtypes.c (make_atomic_type): New function. | |
| 1791 | (recursive_dump_type): Handle TYPE_ATOMIC. | |
| 1792 | * gdbtypes.h (enum type_flag_values): Renumber. | |
| 1793 | (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC. | |
| 1794 | (TYPE_ATOMIC): New macro. | |
| 1795 | (make_atomic_type): Declare. | |
| 1796 | ||
| 31fd9caa MM |
1797 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1798 | ||
| 1799 | * btrace.c (ftrace_find_call): Skip gaps. | |
| 1800 | (ftrace_new_function): Initialize level. | |
| 1801 | (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) | |
| 1802 | (ftrace_new_switch): Update | |
| 1803 | level computation. | |
| 1804 | (ftrace_new_gap): New. | |
| 1805 | (ftrace_update_function): Create new function after gap. | |
| 1806 | (btrace_compute_ftrace_bts): Create gap on error. | |
| 1807 | (btrace_stitch_bts): Update parameters. Clear trace if it | |
| 1808 | becomes empty. | |
| 1809 | (btrace_stitch_trace): Update parameters. Update callers. | |
| 1810 | (btrace_clear): Reset the number of gaps. | |
| 1811 | (btrace_insn_get): Return NULL if the iterator points to a gap. | |
| 1812 | (btrace_insn_number): Return zero if the iterator points to a gap. | |
| 1813 | (btrace_insn_end): Allow gaps at the end. | |
| 1814 | (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. | |
| 1815 | (btrace_find_insn_by_number): Assert that the found iterator does | |
| 1816 | not point to a gap. | |
| 1817 | (btrace_call_next, btrace_call_prev): Assert that the last function | |
| 1818 | is not a gap. | |
| 1819 | * btrace.h (btrace_bts_error): New. | |
| 1820 | (btrace_function): Update comment. | |
| 1821 | (btrace_function) <insn, insn_offset, number>: Update comment. | |
| 1822 | (btrace_function) <errcode>: New. | |
| 1823 | (btrace_thread_info) <ngaps>: New. | |
| 1824 | (btrace_thread_info) <replay>: Update comment. | |
| 1825 | (btrace_insn_get): Update comment. | |
| 1826 | * record-btrace.c (btrace_ui_out_decode_error): New. | |
| 1827 | (record_btrace_info): Print number of gaps. | |
| 1828 | (btrace_insn_history, btrace_call_history): Call | |
| 1829 | btrace_ui_out_decode_error for gaps. | |
| 1830 | (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. | |
| 1831 | ||
| afb778a2 MM |
1832 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1833 | ||
| 1834 | * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New. | |
| 1835 | * nat/linux-btrace.c: (btrace_this_cpu): New. | |
| 1836 | (cpu_supports_bts): Call btrace_this_cpu. | |
| 1837 | (intel_supports_bts): Add cpu parameter. | |
| 1838 | ||
| 7d5c24b3 MM |
1839 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1840 | ||
| 1841 | * btrace.h (btrace_insn_class): New. | |
| 1842 | (btrace_insn) <size, iclass>: New. | |
| 1843 | * btrace.c (ftrace_find_call): Update parameters. Update users. | |
| 1844 | Use instruction classification. | |
| 1845 | (ftrace_new_return): Update parameters. Update users. | |
| 1846 | (ftrace_update_function): Update parameters. Update users. Use | |
| 1847 | instruction classification. | |
| 1848 | (ftrace_update_insns): Update parameters. Update users. | |
| 1849 | (ftrace_classify_insn): New. | |
| 1850 | (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add | |
| 1851 | TRY_CATCH around call to gdb_insn_length. | |
| 1852 | ||
| 76235df1 MM |
1853 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1854 | ||
| 1855 | * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace): | |
| 1856 | Update parameters. Update users. | |
| 1857 | ||
| d33501a5 MM |
1858 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1859 | ||
| 1860 | * btrace.c (parse_xml_btrace_conf_bts): Add size. | |
| 1861 | (btrace_conf_bts_attributes): New. | |
| 1862 | (btrace_conf_children): Add attributes. | |
| 1863 | * common/btrace-common.h (btrace_config_bts): New. | |
| 1864 | (btrace_config)<bts>: New. | |
| 1865 | (btrace_config): Update comment. | |
| 1866 | * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts): | |
| 1867 | Use config. | |
| 1868 | * features/btrace-conf.dtd: Increment version. Add size | |
| 1869 | attribute to bts element. | |
| 1870 | * record-btrace.c (set_record_btrace_bts_cmdlist, | |
| 1871 | show_record_btrace_bts_cmdlist): New. | |
| 1872 | (record_btrace_adjust_size, record_btrace_print_bts_conf, | |
| 1873 | record_btrace_print_conf, cmd_set_record_btrace_bts, | |
| 1874 | cmd_show_record_btrace_bts): New. | |
| 1875 | (record_btrace_info): Call record_btrace_print_conf. | |
| 1876 | (_initialize_record_btrace): Add commands. | |
| 1877 | * remote.c: Add PACKET_Qbtrace_conf_bts_size enum. | |
| 1878 | (remote_protocol_features): Add Qbtrace-conf:bts:size packet. | |
| 1879 | (btrace_sync_conf): Synchronize bts size. | |
| 1880 | (_initialize_remote): Add Qbtrace-conf:bts:size packet. | |
| 1881 | * NEWS: Announce new commands and new packets. | |
| 1882 | ||
| f4abbc16 MM |
1883 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1884 | ||
| 1885 | * Makefile.in (XMLFILES): Add btrace-conf.dtd. | |
| 1886 | * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. | |
| 1887 | (x86_linux_btrace_conf): New. | |
| 1888 | (x86_linux_create_target): Initialize to_btrace_conf. | |
| 1889 | * nat/linux-btrace.c (linux_enable_btrace): Update parameters. | |
| 1890 | Check format. Split into this and ... | |
| 1891 | (linux_enable_bts): ... this. | |
| 1892 | (linux_btrace_conf): New. | |
| 1893 | (perf_event_skip_record): Renamed into ... | |
| 1894 | (perf_event_skip_bts_record): ... this. Updated users. | |
| 1895 | (linux_disable_btrace): Split into this and ... | |
| 1896 | (linux_disable_bts): ... this. | |
| 1897 | (linux_read_btrace): Check format. | |
| 1898 | * nat/linux-btrace.h (linux_enable_btrace): Update parameters. | |
| 1899 | (linux_btrace_conf): New. | |
| 1900 | (btrace_target_info)<ptid>: Moved. | |
| 1901 | (btrace_target_info)<conf>: New. | |
| 1902 | (btrace_target_info): Split into this and ... | |
| 1903 | (btrace_tinfo_bts): ... this. Updated users. | |
| 1904 | * btrace.c (btrace_enable): Update parameters. | |
| 1905 | (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) | |
| 1906 | (btrace_conf_children, btrace_conf_attributes) | |
| 1907 | (btrace_conf_elements): New. | |
| 1908 | * btrace.h (btrace_enable): Update parameters. | |
| 1909 | (btrace_conf, parse_xml_btrace_conf): New. | |
| 1910 | * common/btrace-common.h (btrace_config): New. | |
| 1911 | * feature/btrace-conf.dtd: New. | |
| 1912 | * record-btrace.c (record_btrace_conf): New. | |
| 1913 | (record_btrace_cmdlist): New. | |
| 1914 | (record_btrace_enable_warn, record_btrace_open): Pass | |
| 1915 | &record_btrace_conf. | |
| 1916 | (record_btrace_info): Print recording format. | |
| 1917 | (cmd_record_btrace_bts_start): New. | |
| 1918 | (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. | |
| 1919 | (_initialize_record_btrace): Add "record btrace bts" subcommand. | |
| 1920 | Add "record bts" alias command. | |
| 1921 | * remote.c (remote_state)<btrace_config>: New. | |
| 1922 | (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. | |
| 1923 | (remote_protocol_features): Add qXfer:btrace-conf:read. | |
| 1924 | (remote_open_1): Call remote_btrace_reset. | |
| 1925 | (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. | |
| 1926 | (btrace_target_info)<conf>: New. | |
| 1927 | (btrace_sync_conf, btrace_read_config): New. | |
| 1928 | (remote_enable_btrace): Update parameters. Call btrace_sync_conf and | |
| 1929 | btrace_read_conf. | |
| 1930 | (remote_btrace_conf): New. | |
| 1931 | (init_remote_ops): Initialize to_btrace_conf. | |
| 1932 | (_initialize_remote): Add qXfer:btrace-conf packet. | |
| 1933 | * target.c (target_enable_btrace): Update parameters. | |
| 1934 | (target_btrace_conf): New. | |
| 1935 | * target.h (target_enable_btrace): Update parameters. | |
| 1936 | (target_btrace_conf): New. | |
| 1937 | (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. | |
| 1938 | (target_ops)<to_enable_btrace>: Update parameters and comment. | |
| 1939 | (target_ops)<to_btrace_conf>: New. | |
| 1940 | * target-delegates: Regenerate. | |
| 1941 | * target-debug.h (target_debug_print_const_struct_btrace_config_p) | |
| 1942 | (target_debug_print_const_struct_btrace_target_info_p): New. | |
| 1943 | * NEWS: Announce new command and new packet. | |
| 1944 | ||
| aadf7753 MM |
1945 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1946 | ||
| 1947 | * nat/linux-btrace.h (perf_event_buffer): New. | |
| 1948 | (btrace_target_info) <buffer, size, data_head>: Replace with ... | |
| 1949 | <bts>: ... this. | |
| 1950 | * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size) | |
| 1951 | (perf_event_buffer_size, perf_event_buffer_begin) | |
| 1952 | (perf_event_buffer_end, linux_btrace_has_changed): Removed. | |
| 1953 | Updated users. | |
| 1954 | (perf_event_new_data): New. | |
| 1955 | ||
| 043c3577 MM |
1956 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1957 | ||
| 1958 | * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS. | |
| 1959 | * record-btrace.c (record_btrace_open): Remove call to | |
| 1960 | target_supports_btrace. | |
| 1961 | * remote.c (remote_supports_btrace): Update parameters. | |
| 1962 | * target.c (target_supports_btrace): Update parameters. | |
| 1963 | * target.h (to_supports_btrace, target_supports_btrace): Update | |
| 1964 | parameters. | |
| 1965 | * target-delegates.c: Regenerate. | |
| 1966 | * target-debug.h (target_debug_print_enum_btrace_format): New. | |
| 1967 | * nat/linux-btrace.c | |
| 1968 | (kernel_supports_btrace): Rename into ... | |
| 1969 | (kernel_supports_bts): ... this. Update users. Update warning text. | |
| 1970 | (intel_supports_btrace): Rename into ... | |
| 1971 | (intel_supports_bts): ... this. Update users. | |
| 1972 | (cpu_supports_btrace): Rename into ... | |
| 1973 | (cpu_supports_bts): ... this. Update users. | |
| 1974 | (linux_supports_btrace): Update parameters. Split into this and ... | |
| 1975 | (linux_supports_bts): ... this. | |
| 1976 | * nat/linux-btrace.h (linux_supports_btrace): Update parameters. | |
| 1977 | ||
| 734b0e4b MM |
1978 | 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> |
| 1979 | ||
| 1980 | * Makefile.in (SFILES): Add common/btrace-common.c. | |
| 1981 | (COMMON_OBS): Add common/btrace-common.o. | |
| 1982 | (btrace-common.o): Add build rules. | |
| 1983 | * btrace.c (parse_xml_btrace): Update parameters. | |
| 1984 | (parse_xml_btrace_block): Set format field. | |
| 1985 | (btrace_add_pc, btrace_fetch): Use struct btrace_data. | |
| 1986 | (do_btrace_data_cleanup, make_cleanup_btrace_data): New. | |
| 1987 | (btrace_compute_ftrace): Split into this and... | |
| 1988 | (btrace_compute_ftrace_bts): ...this. | |
| 1989 | (btrace_stitch_trace): Split into this and... | |
| 1990 | (btrace_stitch_bts): ...this. | |
| 1991 | * btrace.h (parse_xml_btrace): Update parameters. | |
| 1992 | (make_cleanup_btrace_data): New. | |
| 1993 | * common/btrace-common.c: New. | |
| 1994 | * common/btrace-common.h: Include common-defs.h. | |
| 1995 | (btrace_block_s): Update comment. | |
| 1996 | (btrace_format): New. | |
| 1997 | (btrace_format_string): New. | |
| 1998 | (btrace_data_bts): New. | |
| 1999 | (btrace_data): New. | |
| 2000 | (btrace_data_init, btrace_data_fini, btrace_data_empty): New. | |
| 2001 | * remote.c (remote_read_btrace): Update parameters. | |
| 2002 | * target.c (target_read_btrace): Update parameters. | |
| 2003 | * target.h (target_read_btrace): Update parameters. | |
| 2004 | (target_ops)<to_read_btrace>: Update parameters. | |
| 2005 | * x86-linux-nat.c (x86_linux_read_btrace): Update parameters. | |
| 2006 | * target-delegates.c: Regenerate. | |
| 2007 | * target-debug (target_debug_print_struct_btrace_data_p): New. | |
| 2008 | * nat/linux-btrace.c (linux_read_btrace): Split into this and... | |
| 2009 | (linux_read_bts): ...this. | |
| 2010 | * nat/linux-btrace.h (linux_read_btrace): Update parameters. | |
| 2011 | ||
| bd2e0e9e DE |
2012 | 2015-02-06 Doug Evans <dje@google.com> |
| 2013 | ||
| 2014 | * remote-m32r-sdi.c: Include symfile.h. | |
| 2015 | ||
| f176c4b5 DE |
2016 | 2015-02-06 Doug Evans <dje@google.com> |
| 2017 | ||
| 2018 | * symtab.h (clear_symtab_users, deduce_language_from_filename): Move | |
| 2019 | * symfile.h (clear_symtab_users, deduce_language_from_filename): ... | |
| 2020 | to here. | |
| 2021 | ||
| d6c146e9 PA |
2022 | 2015-02-06 Pedro Alves <palves@redhat.com> |
| 2023 | ||
| 2024 | * linux-thread-db.c (find_new_threads_callback): Add debug output. | |
| 2025 | ||
| b9d61307 SM |
2026 | 2015-02-06 Simon Marchi <simon.marchi@ericsson.com> |
| 2027 | ||
| 2028 | PR gdb/15678 | |
| 2029 | * breakpoint.c (map_breakpoint_numbers): Check for empty args string. | |
| 2030 | (enable_count_command): Check args for NULL value. | |
| 2031 | ||
| e9fbd043 DE |
2032 | 2015-02-05 Doug Evans <xdje42@gmail.com> |
| 2033 | ||
| 2034 | * guile/scm-frame.c: Fix spelling errors in a comment. | |
| 2035 | ||
| 881d5d5d JK |
2036 | 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2037 | ||
| 2038 | * python/python-internal.h (Py_hash_t): Define it for Python <3.2. | |
| 2039 | * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the | |
| 2040 | return type. | |
| 2041 | ||
| 20ba1ce6 PA |
2042 | 2015-02-04 Pedro Alves <palves@redhat.com> |
| 2043 | ||
| 2044 | * linux-nat.c (handle_extended_wait): Don't resume LWPs here. | |
| 2045 | (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait | |
| 2046 | returns true. | |
| 2047 | (resume_stopped_resumed_lwps): Don't check whether the thread is | |
| 2048 | marked as executing. | |
| 2049 | (linux_nat_wait_1): Use resume_stopped_resumed_lwps. | |
| 2050 | ||
| f962539a AA |
2051 | 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 2052 | ||
| 2053 | * regset.h (struct regset): Add flags field. | |
| 2054 | (REGSET_VARIABLE_SIZE): New value for a regset's flags field. | |
| 2055 | * corelow.c (get_core_register_section): Add warning if the size | |
| 2056 | exceeds the requested size and the regset does not have the | |
| 2057 | REGSET_VARIABLE_SIZE flag set. | |
| 2058 | * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE | |
| 2059 | flag. | |
| 2060 | * armbsd-tdep.c (armbsd_gregset): Likewise. | |
| 2061 | * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise. | |
| 2062 | * hppaobsd-tdep.c (hppaobsd_gregset): Likewise. | |
| 2063 | * m68kbsd-tdep.c (m68kbsd_gregset): Likewise. | |
| 2064 | * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise. | |
| 2065 | ||
| dde9acd6 AA |
2066 | 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 2067 | ||
| 2068 | * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections): | |
| 2069 | For ".reg-xstate", explicitly specify the requested section size | |
| 2070 | via X86_XSTATE_SIZE instead of just 0 on input and | |
| 2071 | X86_XSTATE_MAX_SIZE on output. | |
| 2072 | * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): | |
| 2073 | Likewise. | |
| 2074 | ||
| 1528345d AA |
2075 | 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com> |
| 2076 | ||
| 2077 | PR corefiles/17808: | |
| 2078 | * gdbarch.sh (iterate_over_regset_sections_cb): Document this | |
| 2079 | function type, particularly its SIZE parameter. | |
| 2080 | * gdbarch.h: Regenerate. | |
| 2081 | * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare | |
| 2082 | actual against required size using ">=" instead of "==". | |
| 2083 | (amd64_collect_fpregset): Likewise. | |
| 2084 | * i386-tdep.c (i386_supply_gregset): Likewise. | |
| 2085 | (i386_collect_gregset): Likewise. | |
| 2086 | (i386_supply_fpregset): Likewise. | |
| 2087 | (i386_collect_fpregset): Likewise. | |
| 2088 | * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise. | |
| 2089 | (mips_fill_gregset_wrapper): Likewise. | |
| 2090 | (mips_supply_fpregset_wrapper): Likewise. | |
| 2091 | (mips_fill_fpregset_wrapper): Likewise. | |
| 2092 | (mips64_supply_gregset_wrapper): Likewise. | |
| 2093 | (mips64_fill_gregset_wrapper): Likewise. | |
| 2094 | (mips64_supply_fpregset_wrapper): Likewise. | |
| 2095 | (mips64_fill_fpregset_wrapper): Likewise. | |
| 2096 | * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise. | |
| 2097 | (am33_supply_fpregset_method): Likewise. | |
| 2098 | (am33_collect_gregset_method): Likewise. | |
| 2099 | (am33_collect_fpregset_method): Likewise. | |
| 2100 | ||
| 518be979 DE |
2101 | 2015-02-04 Doug Evans <dje@google.com> |
| 2102 | Pedro Alves <palves@redhat.com> | |
| 2103 | Eli Zaretskii <eliz@gnu.org> | |
| 2104 | ||
| 2105 | PR tui/17810 | |
| 2106 | * tui/tui-command.c (tui_refresh_cmd_win): New function. | |
| 2107 | * tui/tui-command.c (tui_refresh_cmd_win): Declare. | |
| 2108 | * tui/tui-file.c: #include tui/tui-command.h. | |
| 2109 | (tui_file_fputs): Refresh command window if stream is not gdb_stdout. | |
| 2110 | (tui_file_flush): Refresh command window if stream is gdb_stdout. | |
| 2111 | * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush. | |
| 2112 | ||
| 80bd5fab PA |
2113 | 2015-02-04 Pedro Alves <palves@redhat.com> |
| 2114 | ||
| 2115 | Fix build breakage. | |
| 2116 | * event-loop.c (gdb_do_one_event): Add default switch case. | |
| 2117 | ||
| a7606d80 JK |
2118 | 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2119 | ||
| 2120 | Filter out inferior gcc option -fpreprocessed. | |
| 2121 | * compile/compile.c (filter_args): New function. | |
| 2122 | (get_args): Use it. | |
| 2123 | ||
| 70b66289 PA |
2124 | 2015-02-03 Pedro Alves <palves@redhat.com> |
| 2125 | ||
| 2126 | * event-loop.c: Don't declare nor define a queue type for | |
| 2127 | gdb_event_p. | |
| 2128 | (event_queue): Delete. | |
| 2129 | (create_event, create_file_event, gdb_event_xfree) | |
| 2130 | (initialize_event_loop, process_event): Delete. | |
| 2131 | (gdb_do_one_event): Return as soon as one event is handled. | |
| 2132 | (handle_file_event): Change prototype. Used the passed in | |
| 2133 | file_handler pointer and ready_mask instead of looping over all | |
| 2134 | file handlers. | |
| 2135 | (gdb_wait_for_event): Update the poll/select timeouts before | |
| 2136 | blocking. Run event handlers directly instead of queueing events. | |
| 2137 | Return as soon as one event is handled. | |
| 2138 | (struct async_event_handler_data): Delete. | |
| 2139 | (invoke_async_event_handler): Delete. | |
| 2140 | (check_async_event_handlers): Change return type to int. Run | |
| 2141 | event handlers directly instead of queueing events. Return as | |
| 2142 | soon as one event is handled. | |
| 2143 | (handle_timer_event): Delete. | |
| 2144 | (update_wait_timeout): New function, factored out from | |
| 2145 | poll_timers. | |
| 2146 | (poll_timers): Reimplement. | |
| 2147 | * event-loop.h (initialize_event_loop): Delete declaration. | |
| 2148 | * top.c (gdb_init): Don't call initialize_event_loop. | |
| 2149 | ||
| b7d2e916 PA |
2150 | 2015-02-03 Pedro Alves <palves@redhat.com> |
| 2151 | ||
| 2152 | * event-loop.c (clear_async_event_handler): New function. | |
| 2153 | * event-loop.h (clear_async_event_handler): New declaration. | |
| 2154 | * record-btrace.c (record_btrace_async): New function. | |
| 2155 | (init_record_btrace_ops): Install record_btrace_async. | |
| 2156 | * record-full.c (record_full_async): New function. | |
| 2157 | (record_full_resume): Don't mark the async event source here. | |
| 2158 | (init_record_full_ops): Install record_full_async. | |
| 2159 | (record_full_core_resume): Don't mark the async event source here. | |
| 2160 | (init_record_full_core_ops): Install record_full_async. | |
| 2161 | * remote.c (remote_async): Mark and clear the async stop reply | |
| 2162 | queue event-loop token as appropriate. | |
| 2163 | ||
| d9d41e78 PA |
2164 | 2015-02-03 Pedro Alves <palves@redhat.com> |
| 2165 | ||
| 2166 | * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use | |
| 2167 | target_is_async_p instead of target_can_async. | |
| 2168 | (linux_nat_wait): Use target_is_async_p instead of | |
| 2169 | target_can_async. Don't enable async here. | |
| 2170 | * remote.c (interrupt_query, remote_wait, putpkt_binary): Use | |
| 2171 | target_is_async_p instead of target_can_async. | |
| 2172 | ||
| aa3de267 SM |
2173 | 2015-02-02 Simon Marchi <simon.marchi@ericsson.com> |
| 2174 | ||
| 2175 | * varobj.h (lang_varobj_ops): Mention which return values need | |
| 2176 | to be freed. | |
| 2177 | ||
| 2c811c0f JB |
2178 | 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| 2179 | ||
| 2180 | * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker. | |
| 2181 | ||
| b1eedac9 JB |
2182 | 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| 2183 | ||
| 2184 | PR gdb/17856: | |
| 2185 | * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache | |
| 2186 | results found in the cache. | |
| 2187 | ||
| 66c168ae JB |
2188 | 2015-02-02 Joel Brobecker <brobecker@adacore.com> |
| 2189 | ||
| 2190 | PR gdb/17854: | |
| 2191 | * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache | |
| 2192 | when allocating a new one. | |
| 2193 | ||
| 4bdc02b2 TT |
2194 | 2015-02-01 Tom Tromey <tom@tromey.com> |
| 2195 | ||
| 2196 | * MAINTAINERS: Remove myself. | |
| 2197 | ||
| ae6ae975 DE |
2198 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2199 | ||
| 2200 | * dwarf2read.c (process_structure_scope): Update setting of | |
| 2201 | TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO. | |
| 2202 | * gdbtypes.c (internal_type_vptr_fieldno): New function. | |
| 2203 | (set_type_vptr_fieldno): New function. | |
| 2204 | (internal_type_vptr_basetype): New function. | |
| 2205 | (set_type_vptr_basetype): New function. | |
| 2206 | (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO, | |
| 2207 | TYPE_VPTR_BASETYPE. | |
| 2208 | (allocate_cplus_struct_type): Initialize vptr_fieldno. | |
| 2209 | (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ... | |
| 2210 | (print_cplus_stuff): ... moved here. | |
| 2211 | (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE. | |
| 2212 | * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype | |
| 2213 | moved to ... | |
| 2214 | (struct cplus_struct_type): ... here. All uses updated. | |
| 2215 | (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite. | |
| 2216 | (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare. | |
| 2217 | (internal_type_vptr_basetype, set_type_vptr_basetype): Declare. | |
| 2218 | * stabsread.c (read_tilde_fields): Update setting of | |
| 2219 | TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE. | |
| 2220 | ||
| 09e2d7c7 DE |
2221 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2222 | ||
| 2223 | * cp-valprint.c (cp_find_class_member): Rename parameter domain_p | |
| 2224 | to self_p. | |
| 2225 | (cp_print_class_member): Rename local domain to self_type. | |
| 2226 | * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local | |
| 2227 | domain_type to self_type. | |
| 2228 | (set_die_type) <need_gnat_info>: Handle | |
| 2229 | TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD. | |
| 2230 | * gdb-gdb.py (StructMainTypePrettyPrinter): Handle | |
| 2231 | TYPE_SPECIFIC_SELF_TYPE. | |
| 2232 | * gdbtypes.c (internal_type_self_type): New function. | |
| 2233 | (set_type_self_type): New function. | |
| 2234 | (smash_to_memberptr_type): Rename parameter domain to self_type. | |
| 2235 | Update setting of TYPE_SELF_TYPE. | |
| 2236 | (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE. | |
| 2237 | (smash_to_method_type): Rename parameter domain to self_type. | |
| 2238 | Update setting of TYPE_SELF_TYPE. | |
| 2239 | (check_stub_method): Call smash_to_method_type. | |
| 2240 | (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE. | |
| 2241 | (copy_type_recursive): Ditto. | |
| 2242 | * gdbtypes.h (enum type_specific_kind): New value | |
| 2243 | TYPE_SPECIFIC_SELF_TYPE. | |
| 2244 | (struct main_type) <type_specific>: New member self_type. | |
| 2245 | (struct cplus_struct_type) <fn_field.type>: Update comment. | |
| 2246 | (TYPE_SELF_TYPE): Rewrite. | |
| 2247 | (internal_type_self_type, set_type_self_type): Declare. | |
| 2248 | * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to | |
| 2249 | self_type. | |
| 2250 | (gnuv3_method_ptr_to_value): Rename local domain_type to self_type. | |
| 2251 | * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with | |
| 2252 | TYPE_TARGET_TYPE. | |
| 2253 | * stabsread.c (read_member_functions): Mark methods with | |
| 2254 | TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of | |
| 2255 | TYPE_SELF_TYPE. | |
| 2256 | ||
| 4bfb94b8 DE |
2257 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2258 | ||
| 2259 | * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE. | |
| 2260 | All uses updated. | |
| 2261 | ||
| 5f4ce105 DE |
2262 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2263 | ||
| 2264 | * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs | |
| 2265 | or unions. Return zero if union. | |
| 2266 | (gnuv3_get_vtable): Call check_typedef. Assert only passed structs. | |
| 2267 | (gnuv3_rtti_type): Pass already-check_typedef'd value to | |
| 2268 | gnuv3_get_vtable. | |
| 2269 | (compute_vtable_size): Assert only passed structs. | |
| 2270 | (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs. | |
| 2271 | ||
| f6b3afbf DE |
2272 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2273 | ||
| 2274 | * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD | |
| 2275 | kinds. | |
| 2276 | ||
| cfb069a8 GB |
2277 | 2015-01-31 Gary Benson <gbenson@redhat.com> |
| 2278 | Doug Evans <dje@google.com> | |
| 2279 | ||
| 2280 | PR cli/9007 | |
| 2281 | PR cli/11920 | |
| 2282 | PR cli/15548 | |
| 2283 | * cli/cli-cmds.c (complete_command): Notify user if max-completions | |
| 2284 | reached. | |
| 2285 | * common/common-exceptions.h (enum errors) | |
| 2286 | <MAX_COMPLETIONS_REACHED_ERROR>: New value. | |
| 2287 | * completer.h (get_max_completions_reached_message): New declaration. | |
| 2288 | (max_completions): Likewise. | |
| 2289 | (completion_tracker_t): New typedef. | |
| 2290 | (new_completion_tracker): New declaration. | |
| 2291 | (make_cleanup_free_completion_tracker): Likewise. | |
| 2292 | (maybe_add_completion_enum): New enum. | |
| 2293 | (maybe_add_completion): New declaration. | |
| 2294 | (throw_max_completions_reached_error): Likewise. | |
| 2295 | * completer.c (max_completions): New global variable. | |
| 2296 | (new_completion_tracker): New function. | |
| 2297 | (free_completion_tracker): Likewise. | |
| 2298 | (make_cleanup_free_completion_tracker): Likewise. | |
| 2299 | (maybe_add_completions): Likewise. | |
| 2300 | (throw_max_completions_reached_error): Likewise. | |
| 2301 | (complete_line): Remove duplicates and limit result to max_completions | |
| 2302 | entries. | |
| 2303 | (get_max_completions_reached_message): New function. | |
| 2304 | (gdb_display_match_list): Handle max_completions. | |
| 2305 | (_initialize_completer): New declaration and function. | |
| 2306 | * symtab.c: Include completer.h. | |
| 2307 | (completion_tracker): New static variable. | |
| 2308 | (completion_list_add_name): Call maybe_add_completion. | |
| 2309 | (default_make_symbol_completion_list_break_on_1): Renamed from | |
| 2310 | default_make_symbol_completion_list_break_on. Maintain | |
| 2311 | completion_tracker across calls to completion_list_add_name. | |
| 2312 | (default_make_symbol_completion_list_break_on): New function. | |
| 2313 | * top.c (init_main): Set rl_completion_display_matches_hook. | |
| 2314 | * tui/tui-io.c: Include completer.h. | |
| 2315 | (tui_old_rl_display_matches_hook): New static global. | |
| 2316 | (tui_rl_display_match_list): Notify user if max-completions reached. | |
| 2317 | (tui_setup_io): Save/restore rl_completion_display_matches_hook. | |
| 2318 | * NEWS (New Options): Mention set/show max-completions. | |
| 2319 | ||
| e11c72c7 GB |
2320 | 2015-01-31 Gary Benson <gbenson@redhat.com> |
| 2321 | ||
| 2322 | * symtab.c (struct add_name_data) <code>: New field. | |
| 2323 | Updated comments. | |
| 2324 | (add_symtab_completions): New function. | |
| 2325 | (symtab_expansion_callback): Likewise. | |
| 2326 | (default_make_symbol_completion_list_break_on): Set datum.code. | |
| 2327 | Move minimal symbol scan before calling expand_symtabs_matching. | |
| 2328 | Scan known primary symtabs for externs and statics before calling | |
| 2329 | expand_symtabs_matching. Pass symtab_expansion_callback as | |
| 2330 | expansion_notify argument to expand_symtabs_matching. Do not scan | |
| 2331 | primary symtabs for externs and statics after calling | |
| 2332 | expand_symtabs_matching. | |
| 2333 | ||
| 276d885b GB |
2334 | 2015-01-31 Gary Benson <gbenson@redhat.com> |
| 2335 | ||
| 2336 | * symfile.h (expand_symtabs_exp_notify_ftype): New typedef. | |
| 2337 | (struct quick_symbol_functions) <expand_symtabs_matching>: | |
| 2338 | New argument expansion_notify. All uses updated. | |
| 2339 | (expand_symtabs_matching): New argument expansion_notify. | |
| 2340 | All uses updated. | |
| 2341 | * symfile-debug.c (debug_qf_expand_symtabs_matching): | |
| 2342 | Also print expansion notify. | |
| 2343 | * symtab.c (expand_symtabs_matching_via_partial): Call | |
| 2344 | expansion_notify whenever a partial symbol table is expanded. | |
| 2345 | * dwarf2read.c (dw2_expand_symtabs_matching): Call | |
| 2346 | expansion_notify whenever a symbol table is instantiated. | |
| 2347 | ||
| 82083d6d DE |
2348 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2349 | ||
| 2350 | * cli-out.c: #include completer.h, readline/readline.h. | |
| 2351 | (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions. | |
| 2352 | (cli_mld_flush, cld_mld_erase_entire_line): Ditto. | |
| 2353 | (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto. | |
| 2354 | * cli-out.h (cli_display_match_list): Declare. | |
| 2355 | * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros. | |
| 2356 | (ELLIPSIS_LEN): Ditto. | |
| 2357 | (gdb_get_y_or_n, gdb_display_match_list_pager): New functions. | |
| 2358 | (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto. | |
| 2359 | (gdb_fnprint, gdb_print_filename): Ditto. | |
| 2360 | (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto. | |
| 2361 | (gdb_display_match_list): Ditto. | |
| 2362 | * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs. | |
| 2363 | (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto. | |
| 2364 | (mld_beep_ftype, mld_read_key_ftype): Ditto. | |
| 2365 | (match_list_displayer): New struct. | |
| 2366 | (gdb_display_match_list): Declare. | |
| 2367 | * top.c (init_main): Set rl_completion_display_matches_hook. | |
| 2368 | * tui/tui-io.c: #include completer.h. | |
| 2369 | (printable_part, PUTX, print_filename, get_y_or_n): Delete. | |
| 2370 | (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions. | |
| 2371 | (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto. | |
| 2372 | (tui_mld_getc, tui_mld_read_key): Ditto. | |
| 2373 | (tui_rl_display_match_list): Rewrite. | |
| 2374 | (tui_handle_resize_during_io): New arg for_completion. All callers | |
| 2375 | updated. | |
| 2376 | ||
| f57d2163 DE |
2377 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2378 | ||
| 2379 | Add symbol lookup cache. | |
| 2380 | * NEWS: Document new options and commands. | |
| 2381 | * symtab.c (symbol_cache_key): New static global. | |
| 2382 | (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros. | |
| 2383 | (SYMBOL_LOOKUP_FAILED): New macro. | |
| 2384 | (symbol_cache_slot_state): New enum. | |
| 2385 | (block_symbol_cache): New struct. | |
| 2386 | (symbol_cache): New struct. | |
| 2387 | (new_symbol_cache_size, symbol_cache_size): New static globals. | |
| 2388 | (hash_symbol_entry, eq_symbol_entry): New functions. | |
| 2389 | (symbol_cache_byte_size, resize_symbol_cache): New functions. | |
| 2390 | (make_symbol_cache, free_symbol_cache): New functions. | |
| 2391 | (get_symbol_cache, symbol_cache_cleanup): New function. | |
| 2392 | (set_symbol_cache_size, set_symbol_cache_size_handler): New functions. | |
| 2393 | (symbol_cache_lookup, symbol_cache_clear_slot): New function. | |
| 2394 | (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions. | |
| 2395 | (symbol_cache_flush, symbol_cache_dump): New functions. | |
| 2396 | (maintenance_print_symbol_cache): New function. | |
| 2397 | (maintenance_flush_symbol_cache): New function. | |
| 2398 | (symbol_cache_stats): New function. | |
| 2399 | (maintenance_print_symbol_cache_statistics): New function. | |
| 2400 | (symtab_new_objfile_observer): New function. | |
| 2401 | (symtab_free_objfile_observer): New function. | |
| 2402 | (lookup_static_symbol, lookup_global_symbol): Use symbol cache. | |
| 2403 | (_initialize_symtab): Init symbol_cache_key. New parameter | |
| 2404 | maint symbol-cache-size. New maint commands print symbol-cache, | |
| 2405 | print symbol-cache-statistics, flush-symbol-cache. | |
| 2406 | Install new_objfile, free_objfile observers. | |
| 2407 | ||
| e700d1b2 JB |
2408 | 2015-01-31 Joel Brobecker <brobecker@adacore.com> |
| 2409 | ||
| 2410 | PR symtab/17855 | |
| 2411 | * symfile.c (clear_symtab_users): Move call to breakpoint_re_set | |
| 2412 | to end. | |
| 2413 | ||
| 9f050062 DE |
2414 | 2015-01-31 Doug Evans <xdje42@gmail.com> |
| 2415 | ||
| 2416 | * NEWS: Mention inlined scripts in .debug_gdb_scripts section. | |
| 2417 | * auto-load.c: #include ctype.h. | |
| 2418 | (struct auto_load_pspace_info): Replace member loaded_scripts with | |
| 2419 | new members loaded_script_files, loaded_script_texts. | |
| 2420 | (auto_load_pspace_data_cleanup): Update. | |
| 2421 | (init_loaded_scripts_info): Update. | |
| 2422 | (get_auto_load_pspace_data_for_loading): Update. | |
| 2423 | (maybe_add_script_file): Renamed from maybe_add_script. All callers | |
| 2424 | updated. | |
| 2425 | (maybe_add_script_text): New function. | |
| 2426 | (clear_section_scripts): Update. | |
| 2427 | (source_script_file, execute_script_contents): New functions. | |
| 2428 | (source_section_scripts): Add support for | |
| 2429 | SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT. | |
| 2430 | (print_scripts): New function. | |
| 2431 | (auto_load_info_scripts): Also print inlined scripts. | |
| 2432 | (maybe_print_unsupported_script_warning): Renamed from | |
| 2433 | unsupported_script_warning_print. All callers updated. | |
| 2434 | (maybe_print_script_not_found_warning): Renamed from | |
| 2435 | script_not_found_warning_print. All callers updated. | |
| 2436 | * extension-priv.h (struct extension_language_script_ops): New member | |
| 2437 | objfile_script_executor. | |
| 2438 | * extension.c (ext_lang_objfile_script_executor): New function. | |
| 2439 | * extension.h (objfile_script_executor_func): New typedef. | |
| 2440 | (ext_lang_objfile_script_executor): Declare. | |
| 2441 | * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare. | |
| 2442 | * guile/guile.c (guile_extension_script_ops): Update. | |
| 2443 | * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function. | |
| 2444 | * python/python.c (python_extension_script_ops): Update. | |
| 2445 | (gdbpy_execute_objfile_script): New function. | |
| 2446 | ||
| 312809f8 EZ |
2447 | 2015-01-31 Eli Zaretskii <eliz@gnu.org> |
| 2448 | ||
| 2449 | * tui/tui-io.c (tui_expand_tabs): New function. | |
| 2450 | (tui_puts, tui_redisplay_readline): Expand TABs into the | |
| 2451 | appropriate number of spaces. | |
| 2452 | * tui/tui-regs.c: Include tui-io.h. | |
| 2453 | (tui_register_format): Call tui_expand_tabs to expand TABs into | |
| 2454 | the appropriate number of spaces. | |
| 2455 | * tui/tui-io.h: Add prototype for tui_expand_tabs. | |
| 2456 | ||
| b6577aab DE |
2457 | 2015-01-30 Doug Evans <dje@google.com> |
| 2458 | ||
| 2459 | * NEWS: "info source" command now display producer string if present. | |
| 2460 | * source.c (source_info): Print producer string if present. | |
| 2461 | ||
| 6da58d3e SM |
2462 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2463 | ||
| 2464 | * varobj.c (varobj_delete): Fix comment. | |
| 2465 | ||
| 837ce252 SM |
2466 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2467 | ||
| 2468 | * varobj.c (create_child): Modify comment. | |
| 2469 | ||
| b09e2c59 SM |
2470 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2471 | ||
| 2472 | * ada-varobj.c (ada_number_of_children): Constify struct varobj * | |
| 2473 | parameter. | |
| 2474 | (ada_name_of_variable): Same. | |
| 2475 | (ada_path_expr_of_child): Same. | |
| 2476 | (ada_value_of_variable): Same. | |
| 2477 | (ada_value_is_changeable_p): Same. | |
| 2478 | (ada_value_has_mutated): Same. | |
| 2479 | * c-varobj.c (varobj_is_anonymous_child): Same. | |
| 2480 | (c_is_path_expr_parent): Same. | |
| 2481 | (c_number_of_children): Same. | |
| 2482 | (c_name_of_variable): Same. | |
| 2483 | (c_path_expr_of_child): Same. | |
| 2484 | (get_type): Same. | |
| 2485 | (c_value_of_variable): Same. | |
| 2486 | (cplus_number_of_children): Same. | |
| 2487 | (cplus_name_of_variable): Same. | |
| 2488 | (cplus_path_expr_of_child): Same. | |
| 2489 | (cplus_value_of_variable): Same. | |
| 2490 | * jv-varobj.c (java_number_of_children): Same. | |
| 2491 | (java_name_of_variable): Same. | |
| 2492 | (java_path_expr_of_child): Same. | |
| 2493 | (java_value_of_variable): Same. | |
| 2494 | * varobj.c (number_of_children): Same. | |
| 2495 | (name_of_variable): Same. | |
| 2496 | (is_root_p): Same. | |
| 2497 | (varobj_ensure_python_env): Same. | |
| 2498 | (varobj_get_objname): Same. | |
| 2499 | (varobj_get_expression): Same. | |
| 2500 | (varobj_get_display_format): Same. | |
| 2501 | (varobj_get_display_hint): Same. | |
| 2502 | (varobj_has_more): Same. | |
| 2503 | (varobj_get_thread_id): Same. | |
| 2504 | (varobj_get_frozen): Same. | |
| 2505 | (dynamic_varobj_has_child_method): Same. | |
| 2506 | (varobj_get_gdb_type): Same. | |
| 2507 | (is_path_expr_parent): Same. | |
| 2508 | (varobj_default_is_path_expr_parent): Same. | |
| 2509 | (varobj_get_language): Same. | |
| 2510 | (varobj_get_attributes): Same. | |
| 2511 | (varobj_is_dynamic_p): Same. | |
| 2512 | (varobj_get_child_range): Same. | |
| 2513 | (varobj_value_has_mutated): Same. | |
| 2514 | (varobj_get_value_type): Same. | |
| 2515 | (number_of_children): Same. | |
| 2516 | (name_of_variable): Same. | |
| 2517 | (check_scope): Same. | |
| 2518 | (varobj_editable_p): Same. | |
| 2519 | (varobj_value_is_changeable_p): Same. | |
| 2520 | (varobj_floating_p): Same. | |
| 2521 | (varobj_default_value_is_changeable_p): Same. | |
| 2522 | ||
| 2568868e SM |
2523 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2524 | ||
| 2525 | * varobj.c (varobj_get_path_expr): Set var->path_expr. | |
| 2526 | * c-varobj.c (c_path_expr_of_child): Set local var instead of | |
| 2527 | child->path_expr. | |
| 2528 | (cplus_path_expr_of_child): Same. | |
| 2529 | ||
| ca83fa81 SM |
2530 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2531 | ||
| 2532 | * mi-cmd-var.c (print_varobj): Free varobj_get_expression | |
| 2533 | result. | |
| 2534 | (mi_cmd_var_info_expression): Same. | |
| 2535 | * varobj.c (varobj_get_expression): Mention in the comment that | |
| 2536 | the result must by freed by the caller. | |
| 2537 | ||
| afa269ae SM |
2538 | 2015-01-30 Simon Marchi <simon.marchi@ericsson.com> |
| 2539 | ||
| 2540 | * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of | |
| 2541 | varobj_get_type. | |
| 2542 | (varobj_update_one): Same. | |
| 2543 | * varobj.c (update_type_if_necessary): Free curr_type_str and | |
| 2544 | new_type_str. | |
| 2545 | (varobj_get_type): Specify in comment that the result needs to be | |
| 2546 | freed by the caller. | |
| 2547 | ||
| cd366ee8 DE |
2548 | 2015-01-29 Doug Evans <dje@google.com> |
| 2549 | ||
| 2550 | PR symtab/17890 | |
| 2551 | * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4. | |
| 2552 | ||
| 38360086 MW |
2553 | 2015-01-25 Mark Wielaard <mjw@redhat.com> |
| 2554 | ||
| 2555 | * dwarf2read.c (checkproducer): Call producer_is_gcc. | |
| 2556 | * utils.c (producer_is_gcc_ge_4): Likewise. | |
| 2557 | (producer_is_gcc): New function. | |
| 2558 | * utils.h (producer_is_gcc): New declaration. | |
| 2559 | ||
| df25ebbd JB |
2560 | 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| 2561 | ||
| 2562 | * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum | |
| 2563 | kind. | |
| 2564 | * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr" | |
| 2565 | parameter by "addr_stack" parameter. | |
| 2566 | (resolve_dynamic_range): Replace "addr" parameter by | |
| 2567 | "stack_addr" parameter. Update function documentation. | |
| 2568 | Update code accordingly. | |
| 2569 | (resolve_dynamic_array, resolve_dynamic_union) | |
| 2570 | (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise. | |
| 2571 | (resolve_dynamic_type): Update code, following the changes made | |
| 2572 | to resolve_dynamic_type_internal's interface. | |
| 2573 | * dwarf2loc.h (struct property_addr_info): New. | |
| 2574 | (dwarf2_evaluate_property): Replace "address" parameter | |
| 2575 | by "addr_stack" parameter. Adjust function documentation. | |
| 2576 | (struct dwarf2_offset_baton): New. | |
| 2577 | (struct dwarf2_property_baton): Update documentation of | |
| 2578 | field "referenced_type" to be more general. New field | |
| 2579 | "offset_info" in union data field. | |
| 2580 | * dwarf2loc.c (dwarf2_evaluate_property): Replace "address" | |
| 2581 | parameter by "addr_stack" parameter. Adjust code accordingly. | |
| 2582 | Add support for PROP_ADDR_OFFSET properties. | |
| 2583 | * dwarf2read.c (attr_to_dynamic_prop): Add support for | |
| 2584 | DW_AT_data_member_location attributes as well. Use case | |
| 2585 | statements instead of if/else condition. | |
| 2586 | ||
| 4a0ca9ec JB |
2587 | 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| 2588 | ||
| 2589 | * ada-varobj.c (ada_varobj_get_array_number_of_children): | |
| 2590 | Return zero if PARENT_VALUE is NULL and parent_type's | |
| 2591 | range type is dynamic. | |
| 2592 | ||
| ddb87a81 JB |
2593 | 2015-01-29 Joel Brobecker <brobecker@adacore.com> |
| 2594 | ||
| 2595 | * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return | |
| 2596 | nonzero if the type's subtype is dynamic. | |
| 2597 | (resolve_dynamic_range): Also resolve the range's subtype. | |
| 2598 | ||
| 3d7ad9b4 | 2599 | 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch) |
| 7a270e0c | 2600 | |
| 3d7ad9b4 | 2601 | Pushed by Joel Brobecker <brobecker@adacore.com>. |
| 7a270e0c AK |
2602 | * symfile.c (unmap_overlay_command): Initialize sec to NULL. |
| 2603 | ||
| 3a8b707a DE |
2604 | 2015-01-27 Doug Evans <dje@google.com> |
| 2605 | ||
| 2606 | * NEWS: Mention gdb.Objfile.username. | |
| 2607 | * python/py-objfile.c (objfpy_get_username): New function. | |
| 2608 | (objfile_getset): Add "username". | |
| 2609 | ||
| d35b90fb MW |
2610 | 2015-01-24 Mark Wielaard <mjw@redhat.com> |
| 2611 | ||
| 2612 | * stack.c (return_command): Markup warning message with _. | |
| 2613 | ||
| 734ae125 DE |
2614 | 2015-01-24 Doug Evans <xdje42@gmail.com> |
| 2615 | ||
| 2616 | * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete. | |
| 2617 | ||
| 527f3840 JK |
2618 | 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2619 | ||
| 2620 | Fix 100x slowdown regression on DWZ files. | |
| 2621 | * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash. | |
| 2622 | (struct line_header): Add offset and offset_in_dwz. | |
| 2623 | (dwarf_decode_lines): Add parameter decode_mapping to the declaration. | |
| 2624 | (free_line_header_voidp): New declaration. | |
| 2625 | (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New | |
| 2626 | functions. | |
| 2627 | (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller. | |
| 2628 | (handle_DW_AT_stmt_list): Use line_header_hash. | |
| 2629 | (free_line_header_voidp): New function. | |
| 2630 | (dwarf_decode_line_header): Initialize offset and offset_in_dwz. | |
| 2631 | (dwarf_decode_lines): New parameter decode_mapping, use it. | |
| 2632 | (dwarf2_free_objfile): Free line_header_hash. | |
| 2633 | ||
| f7e5394d SM |
2634 | 2015-01-23 Simon Marchi <simon.marchi@ericsson.com> |
| 2635 | ||
| 2636 | PR gdb/17416 | |
| 2637 | * valops.c (value_rtti_indirect_type): Catch exception thrown by | |
| 2638 | value_ind. | |
| 2639 | ||
| 743649fd MW |
2640 | 2015-01-15 Mark Wielaard <mjw@redhat.com> |
| 2641 | ||
| 2642 | * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from | |
| 2643 | DW_AT_noreturn. | |
| 2644 | * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make | |
| 2645 | calling_convention an 8 bit bit field. | |
| 2646 | (TYPE_NO_RETURN): New macro. | |
| 2647 | * infcmd.c (finish_command): Query if function does not return | |
| 2648 | normally. | |
| 2649 | * stack.c (return_command): Likewise. | |
| 2650 | ||
| 198297aa PA |
2651 | 2015-01-23 Pedro Alves <palves@redhat.com> |
| 2652 | ||
| 2653 | * linux-nat.c (linux_is_async_p): New macro. | |
| 2654 | (linux_nat_is_async_p): | |
| 2655 | (linux_nat_terminal_inferior): Check whether the target can async | |
| 2656 | instead of whether it is already async. | |
| 2657 | (linux_nat_terminal_ours): Don't check whether the target is | |
| 2658 | async. | |
| 2659 | (linux_async_pipe): Use linux_is_async_p. | |
| 2660 | ||
| 253828f1 JK |
2661 | 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2662 | ||
| 2663 | * NEWS (Changes since GDB 7.9): Add 'thread apply all' option | |
| 2664 | '-ascending'. | |
| 2665 | * thread.c (tp_array_compar_ascending, tp_array_compar): New. | |
| 2666 | (thread_apply_all_command): Parse CMD for tp_array_compar_ascending. | |
| 2667 | Sort tp_array using tp_array_compar. | |
| 2668 | (_initialize_thread): Extend thread_apply_all_command help. | |
| 2669 | ||
| f0e8c4c5 JK |
2670 | 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2671 | ||
| 2672 | * corelow.c (core_open): Call also thread_command. | |
| 2673 | * gdbthread.h (thread_command): New prototype moved from ... | |
| 2674 | * thread.c (thread_command): ... here. | |
| 2675 | (thread_command): Make it global. | |
| 2676 | ||
| 03b79603 PA |
2677 | 2015-01-22 Pedro Alves <palves@redhat.com> |
| 2678 | ||
| 2679 | * configure.ac [*mingw32*]: Check $curses_found instead of | |
| 2680 | $prefer_curses. | |
| 2681 | * configure: Regenerate. | |
| 2682 | * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and | |
| 2683 | HAVE_NCURSES_NCURSES_H checks. | |
| 2684 | ||
| 6b8a872f EZ |
2685 | 2015-01-22 Eli Zaretskii <eliz@gnu.org> |
| 2686 | ||
| bbbbffbb | 2687 | * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm' |
| 6b8a872f EZ |
2688 | fails with the 1st arg NULL, try again with "unknown". Don't test |
| 2689 | the "cup" capability: it isn't supported by the Windows port of | |
| 2690 | ncurses, but the Windows console driver is still capable of | |
| 2691 | supporting TUI. | |
| 2692 | ||
| 4b62a76e JK |
2693 | 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2694 | ||
| 2695 | * compile/compile.c (_initialize_compile): Use -fPIE for compile_args. | |
| 2696 | ||
| 82a864f9 EZ |
2697 | 2015-01-22 Eli Zaretskii <eliz@gnu.org> |
| 2698 | ||
| 2699 | * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h. | |
| 2700 | (ALLDEPFILES): Remove irix5-nat.c. These two are part of the | |
| 2701 | reason that "make TAGS" is broken. | |
| 2702 | ||
| b35018fd CG |
2703 | 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com> |
| 2704 | ||
| 2705 | * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues | |
| 2706 | and check additional store instructions. | |
| 2707 | ||
| ffbc4646 WW |
2708 | 2015-01-21 Wei-cheng Wang <cole945@gmail.com> |
| 2709 | ||
| 2710 | * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang". | |
| 2711 | ||
| ddeca1df WW |
2712 | 2015-01-21 Wei-cheng Wang <cole945@gmail.com> |
| 2713 | ||
| 2714 | * ppc-linux-tdep.c (ppc_skip_trampoline_code, | |
| 2715 | ppc_canonicalize_syscall, ppc_linux_syscall_record, | |
| 2716 | ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments. | |
| 2717 | * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise. | |
| 2718 | * rs6000-tdep.c (rs6000_epilogue_frame_cache, | |
| 2719 | rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register, | |
| 2720 | rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4, | |
| 2721 | ppc_process_record_op19, ppc_process_record_op31, | |
| 2722 | ppc_process_record_op59, ppc_process_record_op60, | |
| 2723 | ppc_process_record_op63): Likewise. | |
| 2724 | ||
| 049bb5de JB |
2725 | 2015-01-20 Joel Brobecker <brobecker@adacore.com> |
| 2726 | ||
| 2727 | * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string) | |
| 2728 | (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of | |
| 2729 | strerror. | |
| 2730 | ||
| 42b87c63 | 2731 | 2015-01-20 Wei-cheng Wang <cole945@gmail.com> |
| 810c1026 WW |
2732 | |
| 2733 | * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19, | |
| 2734 | ppc_process_record_op31, ppc_process_record_op59, | |
| 2735 | ppc_process_record_op60, ppc_process_record_op63, | |
| 2736 | ppc_process_record): Fix -Wformat warning. | |
| 2737 | * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60): | |
| 2738 | Remove unused variables. | |
| 2739 | ||
| 569340fc CG |
2740 | 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com> |
| 2741 | ||
| 2742 | * MAINTAINERS (Write After Approval): Add "Chen Gang". | |
| 2743 | ||
| 63413d85 EZ |
2744 | 2015-01-19 Eli Zaretskii <eliz@gnu.org> |
| 2745 | ||
| 2746 | * configure.ac [*mingw32*]: Only add windows-termcap.o to | |
| 2747 | CONFIG_OBS if not building with a curses library. | |
| 2748 | * configure: Regenerate. | |
| 2749 | ||
| 2750 | * windows-termcap.c: Include defs.h. Make the whole body empty if | |
| 2751 | either one of HAVE_CURSES_H or HAVE_NCURSES_H or | |
| 2752 | HAVE_NCURSES_NCURSES_H is defined. | |
| 2753 | ||
| 16d8013c JB |
2754 | 2015-01-19 Joel Brobecker <brobecker@adacore.com> |
| 2755 | ||
| 2756 | * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator | |
| 2757 | from end of line to start of next line. | |
| 2758 | ||
| cf90fd9a WW |
2759 | 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| 2760 | ||
| 2761 | * ppc-linux-tdep.c (ppc_skip_trampoline_code): | |
| 2762 | Scan PLT stub backward for reverse debugging. | |
| 2763 | * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise. | |
| 2764 | ||
| b4cdae6f WW |
2765 | 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| 2766 | Ulrich Weigand <uweigand@de.ibm.com> | |
| 2767 | ||
| 2768 | * configure.tgt (powerpc*-*-linux): Add linux-record.o to | |
| 2769 | gdb_target_obs. | |
| 2770 | (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall | |
| 2771 | record. | |
| 2772 | (ppc_canonicalize_syscall, ppc_linux_syscall_record, | |
| 2773 | ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions. | |
| 2774 | (ppc_linux_init_abi): Set process_record, process_record_signal. | |
| 2775 | * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and | |
| 2776 | ppc_linux_record_tdep to gdbarch_tdep. | |
| 2777 | (ppc_process_record): New declaration. | |
| 2778 | * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4, | |
| 2779 | ppc_process_record_op19, ppc_process_record_op31, | |
| 2780 | ppc_process_record_op59, ppc_process_record_op60, | |
| 2781 | ppc_process_record_op63, ppc_process_record): New functions. | |
| 2782 | ||
| 2608dbf8 WW |
2783 | 2015-01-17 Wei-cheng Wang <cole945@gmail.com> |
| 2784 | ||
| 2785 | * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to | |
| 2786 | rs6000_in_function_epilogue_frame_p and add an argument | |
| 2787 | for frame_info. | |
| 2788 | (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id, | |
| 2789 | rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer): | |
| 2790 | New functions. | |
| 2791 | (rs6000_epilogue_frame_unwind): New. | |
| 2792 | (rs6000_gdbarch_init): Append epilogue unwinder. | |
| 2793 | ||
| 4c347be6 SDJ |
2794 | 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com> |
| 2795 | ||
| 2796 | * nat/linux-personality.c: Replace "#ifndef | |
| 2797 | HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if | |
| 2798 | !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5 | |
| 2799 | systems. | |
| 2800 | ||
| 9f2850ba EZ |
2801 | 2015-01-16 Eli Zaretskii <eliz@gnu.org> |
| 2802 | ||
| 6cdb25f4 EZ |
2803 | * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New |
| 2804 | functions. | |
| 2805 | (_initialize_tui_win) <border-kind, border-mode>: | |
| 2806 | <active-border-mode>: Use tui_set_var_cmd as the "set" function. | |
| c54da50d EZ |
2807 | (tui_set_tab_width_command): Fix the commentary. |
| 2808 | ||
| 6cdb25f4 EZ |
2809 | * tui/tui-win.h: Add prototype for tui_rehighlight_all. |
| 2810 | ||
| bf555842 EZ |
2811 | * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command): |
| 2812 | Doc fix. | |
| cb86fcc1 EZ |
2813 | (tui_set_tab_width_command): Delete and recreate the source and |
| 2814 | the disassembly windows, to show the effect of the changed tab | |
| 2815 | size immediately. | |
| bf555842 | 2816 | |
| 9f2850ba EZ |
2817 | * tui/tui-data.h (LINE_PREFIX): Make shorter |
| 2818 | (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for | |
| 2819 | "Thread NNNNN.XXXX" thread ID notation on Windows. | |
| 2820 | ||
| 95761b2d JK |
2821 | 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com> |
| 2822 | ||
| 2823 | Fix gcc-5 compilation. | |
| 2824 | * hppa-tdep.c (inst_saves_gr): Fix parentheses typo. | |
| 2825 | ||
| 8cc73a39 SDJ |
2826 | 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> |
| 2827 | ||
| 2828 | * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. | |
| 2829 | (linux-personality.o): New rule. | |
| 2830 | * common/common-defs.h: Include <stdint.h>. | |
| 2831 | * config/aarch64/linux.mh (NATDEPFILES): Include | |
| 2832 | linux-personality.o. | |
| 2833 | * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. | |
| 2834 | * config/arm/linux.mh (NATDEPFILES): Likewise. | |
| 2835 | * config/i386/linux64.mh (NATDEPFILES): Likewise. | |
| 2836 | * config/i386/linux.mh (NATDEPFILES): Likewise. | |
| 2837 | * config/ia64/linux.mh (NATDEPFILES): Likewise. | |
| 2838 | * config/m32r/linux.mh (NATDEPFILES): Likewise. | |
| 2839 | * config/m68k/linux.mh (NATDEPFILES): Likewise. | |
| 2840 | * config/mips/linux.mh (NATDEPFILES): Likewise. | |
| 2841 | * config/pa/linux.mh (NATDEPFILES): Likewise. | |
| 2842 | * config/powerpc/linux.mh (NATDEPFILES): Likewise. | |
| 2843 | * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. | |
| 2844 | * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. | |
| 2845 | * config/s390/linux.mh (NATDEPFILES): Likewise. | |
| 2846 | * config/sparc/linux64.mh (NATDEPFILES): Likewise. | |
| 2847 | * config/sparc/linux.mh (NATDEPFILES): Likewise. | |
| 2848 | * config/tilegx/linux.mh (NATDEPFILES): Likewise. | |
| 2849 | * config/xtensa/linux.mh (NATDEPFILES): Likewise. | |
| 2850 | * defs.h: Remove #include <stdint.h> (moved to | |
| 2851 | common/common-defs.h). | |
| 2852 | * linux-nat.c: Include nat/linux-personality.h. Remove #include | |
| 2853 | <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to | |
| 2854 | nat/linux-personality.c). | |
| 2855 | (linux_nat_create_inferior): Remove code to disable address space | |
| 2856 | randomization (moved to nat/linux-personality.c). Create cleanup | |
| 2857 | to disable address space randomization. | |
| 2858 | * nat/linux-personality.c: New file. | |
| 2859 | * nat/linux-personality.h: Likewise. | |
| 2860 | ||
| fb23d554 SDJ |
2861 | 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> |
| 2862 | ||
| 2863 | * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and | |
| 2864 | common/posix-strerror.c. | |
| 2865 | (posix-strerror.o): New rule. | |
| 2866 | (mingw-strerror.o): Likewise. | |
| 2867 | * common/common-utils.h (safe_strerror): Move prototype to here, | |
| 2868 | from utils.h. | |
| 2869 | * common/common.host: New file. | |
| 2870 | * common/mingw-strerror.c: Likewise. | |
| 2871 | * common/posix-strerror.c: Likewise. | |
| 2872 | * configure: Regenerated. | |
| 2873 | * configure.ac: Source common/common.host. Add variable | |
| 2874 | common_host_obs to gdb_host_obs. | |
| 2875 | * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and | |
| 2876 | gdb/common/posix-strerror.c when warning about the use of | |
| 2877 | strerror. | |
| 2878 | * mingw-hdep.c (safe_strerror): Remove definition; move it to | |
| 2879 | common/mingw-strerror.c. | |
| 2880 | * posix-hdep.c (safe_strerror): Remove definition; move it to | |
| 2881 | common/posix-hdep.c. | |
| 2882 | * utils.h (safe_strerror): Remove prototype; move to | |
| 2883 | common/common-utils.h. | |
| 2884 | ||
| 3af8af43 JB |
2885 | 2015-01-15 Joel Brobecker <brobecker@adacore.com> |
| 2886 | ||
| 2887 | GDB 7.8.2 released. | |
| 2888 | ||
| bafffb51 JB |
2889 | 2015-01-15 Joel Brobecker <brobecker@adacore.com> |
| 2890 | ||
| 2891 | * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel | |
| 2892 | ___XA type if the array has already been fixed. | |
| 2893 | ||
| cdf43629 YQ |
2894 | 2015-01-14 Yao Qi <yao@codesourcery.com> |
| 2895 | ||
| 2896 | * Makefile.in (ppc-linux.o): New rule. | |
| 2897 | * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. | |
| 2898 | * configure.ac: AC_CHECK_FUNCS(getauxval). | |
| 2899 | * config.in: Re-generated. | |
| 2900 | * configure: Re-generated. | |
| 2901 | * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): | |
| 2902 | Declare. | |
| 2903 | * nat/ppc-linux.c: New file. | |
| 2904 | * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: | |
| 2905 | Call ppc64_64bit_inferior_p. | |
| 2906 | ||
| 514c5338 YQ |
2907 | 2015-01-14 Yao Qi <yao@codesourcery.com> |
| 2908 | ||
| 2909 | * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to | |
| 2910 | nat/ppc-linux.h. | |
| 2911 | (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise. | |
| 2912 | (PPC_FEATURE_HAS_DFP): Likewise. | |
| 2913 | (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise. | |
| 2914 | (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise. | |
| 2915 | (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise. | |
| 2916 | Include "nat/ppc-linux.h". | |
| 2917 | * nat/ppc-linux.h: New file. | |
| 2918 | * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h. | |
| 2919 | ||
| 5589af0e PA |
2920 | 2015-01-14 Pedro Alves <palves@redhat.com> |
| 2921 | ||
| 2922 | PR gdb/17525 | |
| 2923 | * breakpoint.c: Include "interps.h". | |
| 2924 | (bpstat_do_actions_1): Also check whether the interpreter is | |
| 2925 | async. | |
| 2926 | ||
| 6c400b59 PA |
2927 | 2015-01-14 Pedro Alves <palves@redhat.com> |
| 2928 | ||
| 2929 | PR cli/17828 | |
| 2930 | * infrun.c (reinstall_readline_callback_handler_cleanup): Don't | |
| 2931 | reinstall if the interpreter is sync. | |
| 2932 | ||
| e02c96a7 DE |
2933 | 2015-01-13 Doug Evans <dje@google.com> |
| 2934 | ||
| 2935 | * objfiles.c (objfile_filename): New function. | |
| 2936 | * objfiles.h (objfile_filename): Declare it. | |
| 2937 | (objfile_name): Add function comment. | |
| 2938 | * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the | |
| 2939 | bfd file name (which may be realpath'd), and the original name. | |
| 2940 | ||
| 3b2f13ff JB |
2941 | 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| 2942 | ||
| 2943 | * NEWS: Create a new section for the next release branch. | |
| 2944 | Rename the section of the current branch, now that it has | |
| 2945 | been cut. | |
| 2946 | ||
| b4cfe7f8 JB |
2947 | 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| 2948 | ||
| 2949 | GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37): | |
| 2950 | * version.in: Bump version to 7.9.50.DATE-cvs. | |
| 2951 | ||
| 92fc2e69 JB |
2952 | 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| 2953 | ||
| 2954 | * nat/linux-procfs.c (linux_proc_attach_tgid_threads): | |
| 2955 | Remove trailing new-line in argument of call to warning. | |
| 2956 | ||
| f71f0b0d JB |
2957 | 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| 2958 | ||
| 2959 | * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing | |
| 2960 | new-line in argument of call to "warning". | |
| 2961 | ||
| 04dccad0 JB |
2962 | 2015-01-13 Joel Brobecker <brobecker@adacore.com> |
| 2963 | ||
| 2964 | * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found | |
| 2965 | in static block, then try searching for primitive types. | |
| 2966 | ||
| 08b13bdd PP |
2967 | 2015-01-12 Patrick Palka <patrick@parcs.ath.cx> |
| 2968 | ||
| 2969 | * top.h (gdb_add_history): Declare. | |
| 2970 | * top.c (command_count): New variable. | |
| 2971 | (gdb_add_history): New function. | |
| 2972 | (gdb_safe_append_history): New static function. | |
| 2973 | (quit_force): Call it. | |
| 2974 | (command_line_input): Use gdb_add_history instead of | |
| 2975 | add_history. | |
| 2976 | * event-top.c (command_line_handler): Likewise. | |
| 2977 | ||
| 4ac15b59 JC |
2978 | 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch) |
| 2979 | ||
| 2980 | PR gdb/17046 | |
| 2981 | * darwin-nat.c: Replace <machine/setjmp.h> #include by | |
| 2982 | <setjmp.h> #include. | |
| 2983 | ||
| 005e54bb DE |
2984 | 2015-01-11 Doug Evans <xdje42@gmail.com> |
| 2985 | ||
| 2986 | * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME. | |
| 2987 | ||
| 439250fb DE |
2988 | 2015-01-11 Doug Evans <xdje42@gmail.com> |
| 2989 | ||
| 2990 | PR gdb/15830 | |
| 2991 | * NEWS: The "maint demangle" command is renamed as "demangle". | |
| 2992 | * demangle.c: #include cli/cli-utils.h, language.h. | |
| 2993 | (demangle_command): New function. | |
| 2994 | (_initialize_demangle): Add new command "demangle". | |
| 2995 | * maint.c (maintenance_demangle): Stub out. | |
| 2996 | (_initialize_maint_cmds): Update help text for "maint demangle", | |
| 2997 | and mark as deprecated. | |
| 2998 | ||
| ebf3aa72 MK |
2999 | 2015-01-11 Mark Kettenis <kettenis@gnu.org> |
| 3000 | ||
| 3001 | * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that | |
| 3002 | inferior_thread is a function. | |
| 3003 | ||
| 6bf045cd PP |
3004 | 2015-01-09 Patrick Palka <patrick@parcs.ath.cx> |
| 3005 | ||
| 3006 | * Makefile.in (.y.c): Don't munge yacc's #line | |
| 3007 | directives. | |
| 3008 | ||
| 588dcc3e PP |
3009 | 2015-01-09 Patrick Palka <patrick@parcs.ath.cx> |
| 3010 | ||
| 3011 | * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper | |
| 3012 | to prompt for input. | |
| 3013 | * tui/tui-hooks.c (tui_query_hook): Remove. | |
| 3014 | (tui_install_hooks): Don't set deprecated_query_hook. | |
| 3015 | * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in | |
| 3016 | height calculation. Always update the command window's cur_line. | |
| 3017 | ||
| 9c02b525 PA |
3018 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3019 | ||
| 3020 | * breakpoint.c (hardware_breakpoint_inserted_here_p): New | |
| 3021 | function. | |
| 3022 | * breakpoint.h (hardware_breakpoint_inserted_here_p): New | |
| 3023 | declaration. | |
| 3024 | * linux-nat.c (linux_nat_status_is_event): Move higher up in file. | |
| 3025 | (linux_resume_one_lwp): Store the thread's PC. Adjust to clear | |
| 3026 | stop_reason. | |
| 3027 | (check_stopped_by_watchpoint): New function. | |
| 3028 | (save_sigtrap): Reimplement. | |
| 3029 | (linux_nat_stopped_by_watchpoint): Adjust. | |
| 3030 | (linux_nat_lp_status_is_event): Delete. | |
| 3031 | (stop_wait_callback): Only call save_sigtrap after storing the | |
| 3032 | pending status. | |
| 3033 | (status_callback): If the thread had been stopped for a breakpoint | |
| 3034 | that has since been removed, discard the event and resume the LWP. | |
| 3035 | (count_events_callback, select_event_lwp_callback): Use | |
| 3036 | lwp_status_pending_p instead of linux_nat_lp_status_is_event. | |
| 3037 | (cancel_breakpoint): Rename to ... | |
| 3038 | (check_stopped_by_breakpoint): ... this. Record whether the LWP | |
| 3039 | stopped for a software breakpoint or hardware breakpoint. | |
| 3040 | (select_event_lwp): Only give preference to the stepping LWP in | |
| 3041 | all-stop mode. Adjust comments. | |
| 3042 | (stop_and_resume_callback): Remove references to new_pending_p. | |
| 3043 | (linux_nat_filter_event): Likewise. Leave exit events of the | |
| 3044 | leader thread pending here. Handle signal short circuiting here. | |
| 3045 | Only call save_sigtrap after storing the pending waitstatus. | |
| 3046 | (linux_nat_wait_1): Remove 'retry' label. Remove references to | |
| 3047 | new_pending. Don't handle leaving events the caller is not | |
| 3048 | interested in pending here, nor handle signal short-circuiting | |
| 3049 | here. Also give equal priority to all LWPs that have had events | |
| 3050 | in non-stop mode. If reporting a software breakpoint event, | |
| 3051 | unadjust the LWP's PC. | |
| 3052 | * linux-nat.h (enum lwp_stop_reason): New. | |
| 3053 | (struct lwp_info) <stop_pc>: New field. | |
| 3054 | (struct lwp_info) <stopped_by_watchpoint>: Delete field. | |
| 3055 | (struct lwp_info) <stop_reason>: New field. | |
| 3056 | * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust. | |
| 3057 | ||
| 8af756ef PA |
3058 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3059 | ||
| 3060 | * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>: | |
| 3061 | Set the LWP's 'resumed' flag. | |
| 3062 | ||
| 8a99810d PA |
3063 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3064 | ||
| 3065 | * linux-nat.c (linux_resume_one_lwp): New function. | |
| 3066 | (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp. | |
| 3067 | (linux_nat_resume): Use lwp_status_pending_p and | |
| 3068 | linux_resume_one_lwp. | |
| 3069 | (linux_handle_syscall_trap): Use linux_resume_one_lwp. | |
| 3070 | (linux_handle_extended_wait): Use linux_resume_one_lwp. | |
| 3071 | (status_callback, running_callback): Use lwp_status_pending_p. | |
| 3072 | (lwp_status_pending_p): New function. | |
| 3073 | (stop_and_resume_callback): Use lwp_status_pending_p. | |
| 3074 | (linux_nat_filter_event): Use linux_resume_one_lwp. | |
| 3075 | (linux_nat_wait_1): Always use status_callback to look for an LWP | |
| 3076 | with a pending status. Use linux_resume_one_lwp. | |
| 3077 | (resume_stopped_resumed_lwps): Use lwp_status_pending_p and | |
| 3078 | linux_resume_one_lwp. | |
| 3079 | ||
| f7ce857f PA |
3080 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3081 | ||
| 3082 | * breakpoint.c (bp_location_inserted_here_p): New function, | |
| 3083 | factored out from ... | |
| 3084 | (breakpoint_inserted_here_p): ... here. Use | |
| 3085 | ALL_BP_LOCATIONS_AT_ADDR. | |
| 3086 | (software_breakpoint_inserted_here_p): Use | |
| 3087 | bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR. | |
| 3088 | ||
| c1a747c1 PA |
3089 | 2014-01-09 Pedro Alves <palves@redhat.com> |
| 3090 | ||
| 3091 | Skip enabling event reporting if the kernel supports | |
| 3092 | PTRACE_EVENT_CLONE. | |
| 3093 | * linux-thread-db.c: Include "nat/linux-ptrace.h". | |
| 3094 | (thread_db_use_events): New function. | |
| 3095 | (try_thread_db_load_1): Check thread_db_use_events before enabling | |
| 3096 | event reporting. | |
| 3097 | (update_thread_state): New function. | |
| 3098 | (attach_thread): Use it. Check thread_db_use_events before | |
| 3099 | enabling event reporting. | |
| 3100 | (thread_db_detach): Check thread_db_use_events before disabling | |
| 3101 | event reporting. | |
| 3102 | (find_new_threads_callback): Check thread_db_use_events before | |
| 3103 | enabling event reporting. Update the thread's state if not using | |
| 3104 | libthread_db events. | |
| 3105 | ||
| a33e3959 PA |
3106 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3107 | ||
| 3108 | * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're | |
| 3109 | about to wait for is > 0. | |
| 3110 | * linux-thread-db.c (find_new_threads_callback): Ignore thread if | |
| 3111 | the kernel thread ID is -1. | |
| 3112 | ||
| 8784d563 PA |
3113 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3114 | ||
| 3115 | * linux-nat.c (attach_proc_task_lwp_callback): New function. | |
| 3116 | (linux_nat_attach): Use linux_proc_attach_tgid_threads. | |
| 3117 | (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's | |
| 3118 | ptrace option flags. | |
| 3119 | * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New | |
| 3120 | field. | |
| 3121 | * nat/linux-procfs.c: Include <dirent.h>. | |
| 3122 | (linux_proc_get_int): New parameter "warn". Handle it. | |
| 3123 | (linux_proc_get_tgid): Adjust. | |
| 3124 | (linux_proc_get_tracerpid): Rename to ... | |
| 3125 | (linux_proc_get_tracerpid_nowarn): ... this. | |
| 3126 | (linux_proc_pid_get_state): New function, factored out from | |
| 3127 | (linux_proc_pid_has_state): ... this. Add new parameter "warn" | |
| 3128 | and handle it. | |
| 3129 | (linux_proc_pid_is_gone): New function. | |
| 3130 | (linux_proc_pid_is_stopped): Adjust. | |
| 3131 | (linux_proc_pid_is_zombie_maybe_warn) | |
| 3132 | (linux_proc_pid_is_zombie_nowarn): New functions. | |
| 3133 | (linux_proc_pid_is_zombie): Use | |
| 3134 | linux_proc_pid_is_zombie_maybe_warn. | |
| 3135 | (linux_proc_attach_tgid_threads): New function. | |
| 3136 | * nat/linux-procfs.h (linux_proc_get_tgid): Update comment. | |
| 3137 | (linux_proc_get_tracerpid): Rename to ... | |
| 3138 | (linux_proc_get_tracerpid_nowarn): ... this, and update comment. | |
| 3139 | (linux_proc_pid_is_gone): New declaration. | |
| 3140 | (linux_proc_pid_is_zombie): Update comment. | |
| 3141 | (linux_proc_pid_is_zombie_nowarn): New declaration. | |
| 3142 | (linux_proc_attach_lwp_func): New typedef. | |
| 3143 | (linux_proc_attach_tgid_threads): New declaration. | |
| 3144 | * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to | |
| 3145 | use nowarn functions. | |
| 3146 | (linux_ptrace_attach_fail_reason_string): Move here from | |
| 3147 | gdbserver/linux-low.c and rename. | |
| 3148 | (ptrace_supports_feature): If the current ptrace options are not | |
| 3149 | known yet, check them now, instead of asserting. | |
| 3150 | * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string): | |
| 3151 | Declare. | |
| 3152 | ||
| 883ed13e PA |
3153 | 2015-01-09 Pedro Alves <palves@redhat.com> |
| 3154 | ||
| 3155 | * linux-thread-db.c (thread_db_find_new_threads_silently) | |
| 3156 | (try_thread_db_load_1, try_thread_db_load, thread_db_load_search) | |
| 3157 | (find_new_threads_once): Print debug output on gdb_stdlog. | |
| 3158 | ||
| 1710aab8 CG |
3159 | 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com> |
| 3160 | Pedro Alves <palves@redhat.com> | |
| 3161 | ||
| 3162 | * compile/compile.c: Include "gdb_wait.h". | |
| 3163 | (do_rmdir): Check return value, and free 'zap'. | |
| 3164 | ||
| b597c318 YQ |
3165 | 2015-01-08 Pedro Alves <palves@redhat.com> |
| 3166 | Yao Qi <yao@codesourcery.com> | |
| 3167 | ||
| 3168 | * dwarf2loc.c (indirect_pieced_value): Don't call | |
| 3169 | gdb_sign_extend. Call extract_signed_integer instead. | |
| 3170 | * utils.c (gdb_sign_extend): Remove. | |
| 3171 | * utils.h (gdb_sign_extend): Remove declaration. | |
| 3172 | ||
| 025ac414 PM |
3173 | 2015-01-07 Pierre Muller <muller@sourceware.org> |
| 3174 | ||
| 3175 | PR symtab/17811 | |
| 3176 | * stabsread.c (define_symbol): Set language for C++ special symbols. | |
| 3177 | ||
| fa5af12a PP |
3178 | 2015-01-07 Patrick Palka <patrick@parcs.ath.cx> |
| 3179 | ||
| 3180 | * inflow.c (initial_gdb_ttystate): Tweak comment. | |
| 3181 | ||
| ea42d6f8 JB |
3182 | 2015-01-07 Joel Brobecker <brobecker@adacore.com> |
| 3183 | ||
| 3184 | * inflow.c (set_initial_gdb_ttystate): Add empty line after | |
| 3185 | comment documenting function. | |
| 3186 | ||
| 6a06d660 PP |
3187 | 2015-01-07 Patrick Palka <patrick@parcs.ath.cx> |
| 3188 | ||
| 3189 | * terminal.h (set_initial_gdb_ttystate): Declare. | |
| 3190 | * inflow.c (initial_gdb_ttystate): New static variable. | |
| 3191 | (set_initial_gdb_ttystate): New setter. | |
| 3192 | (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate | |
| 3193 | instead of our current terminal state. | |
| 3194 | * top.c (gdb_init): Call set_initial_gdb_ttystate. | |
| 3195 | ||
| e810d75b JB |
3196 | 2015-01-07 Joel Brobecker <brobecker@adacore.com> |
| 3197 | ||
| 3198 | * guile/scm-type.c (tyscm_array_1): Add comment. | |
| 3199 | * python/py-type.c (typy_array_1): Add comment. | |
| 3200 | ||
| fce10a84 JB |
3201 | 2015-01-06 Joel Brobecker <brobecker@adacore.com> |
| 3202 | ||
| 3203 | * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range | |
| 3204 | error if N2 is equal to N1 - 1. | |
| 3205 | ||
| 8503d6e1 JB |
3206 | 2015-01-06 Joel Brobecker <brobecker@adacore.com> |
| 3207 | ||
| 3208 | * python/py-type.c (typy_array_1): Do not raise negative-length | |
| 3209 | exception if N2 is equal to N1 - 1. | |
| 3210 | ||
| 4d29c0a8 DE |
3211 | 2015-01-03 Doug Evans <xdje42@gmail.com> |
| 3212 | ||
| 3213 | * c-exp.y: Whitespace cleanup. | |
| 3214 | (classify_inner_name): Remove extra ;. | |
| 3215 | ||
| eaa6a9a4 MR |
3216 | 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com> |
| 3217 | ||
| 3218 | * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack | |
| 3219 | offset signed. | |
| 3220 | ||
| 02fe9972 DE |
3221 | 2015-01-02 Doug Evans <dje@google.com> |
| 3222 | ||
| 3223 | * dwarf2read.c (setup_type_unit_groups): Remove outdated comment. | |
| 3224 | ||
| e2ada9cb DE |
3225 | 2015-01-02 Doug Evans <dje@google.com> |
| 3226 | ||
| 3227 | * symtab.h (struct symbol): Fix typo in comment. | |
| 3228 | ||
| 32d0add0 JB |
3229 | 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| 3230 | ||
| 3231 | Update year range in copyright notice of all files. | |
| 3232 | ||
| 76f2b779 JB |
3233 | 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| 3234 | ||
| 3235 | * top.c (print_gdb_version): Update copyright year to 2015. | |
| 3236 | ||
| 077309e2 | 3237 | 2015-01-01 Joel Brobecker <brobecker@adacore.com> |
| 6bf6fd09 | 3238 | |
| 077309e2 | 3239 | * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014. |
| 6bf6fd09 | 3240 | |
| 077309e2 | 3241 | For older changes see ChangeLog-2014. |
| c906108c SS |
3242 | \f |
| 3243 | Local Variables: | |
| 3244 | mode: change-log | |
| 3245 | left-margin: 8 | |
| 3246 | fill-column: 74 | |
| 3247 | version-control: never | |
| 57da7796 | 3248 | coding: utf-8 |
| c906108c | 3249 | End: |