2009-04-20 David Daney <ddaney@caviumnetworks.com>

[deliverable/binutils-gdb.git] / gdb / ChangeLog

2009-04-20  David Daney  <ddaney@caviumnetworks.com>

	* NEWS: Mention MIPS/Linux hardware watchpoint support.

2009-04-20  David Daney  <ddaney@caviumnetworks.com>

	* mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
	(maint_show_dr, super_close): New variables.
	(super_fetch_registers, super_store_registers): Make static.
	(PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
	(W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
	(pt_watch_style): Define new enum.
	(mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
	Define new structs.
	(watch_readback_valid, watch_readback, current_watches,	watch_mirror):
	New variables.
	(get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
	(set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
	(mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
	(mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
	(type_to_irw, fill_mask, try_one_watch)
	(mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
	(mips_linux_new_thread, populate_regs_from_watches)
	(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
	(mips_linux_close): New functions.
	(_initialize_mips_linux_nat): Register watchpoint functions with
	the target_ops.  Add show-debug-regs maintenance command.

2009-04-20  David Daney  <ddaney@caviumnetworks.com>

	* infrun.c (handle_inferior_event): Move gegisters_changed call down.

2009-04-19  Pedro Alves  <pedro@codesourcery.com>

	* NEWS: Mention gdbserver support for x86 Windows CE.

2009-04-19  Eli Zaretskii  <eliz@gnu.org>

	* config/djgpp/fnchange.lst: Fix typos.

	Set default host and target charsets in the DJGPP port.

	* config/djgpp/config.sed (am_cv_langinfo_codeset)
	(bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
	in all configure scripts that define ac_cv_env_CPP_value.

	* go32-nat.c (dos_codepage, nl_langinfo): New functions.
	Include langinfo.h.

	* config/djgpp/nl_types.h: New file.

	* config/djgpp/langinfo.h: New file.

	* config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.

2009-04-18  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in (MAKEHTML): Set to makeinfo --html.
	(MAKEHTMLFLAGS): Set to empty.

2009-04-18  Eli Zaretskii  <eliz@gnu.org>

	* NEWS: Mention all new set/show commands added since GDB 6.8 was
	released.

	* go32-nat.c (go32_sysinfo): Check if the call to
	__dpmi_get_capabilities fills the buffer with information, and
	don't use the buffer if not.

2009-04-17  Tom Tromey  <tromey@redhat.com>

	* charset.c (_initialize_charset): Add special case for "646".

2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>

	* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
	* configure: Regenerate.
	* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
	configure substitutions.
	(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.

2009-04-17  Pierre Muller  <muller.u-strasbg.fr>

	ARI fix: Do not use %p, replace by call to host_address_to_string
	for host pointers.
	* darwin-nat.c (darwin_xfer_partial): Apply change.
	* gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
	* gnu-nat.h (proc_debug): Ditto.
	* symmisc.c (maintenance_info_symtabs): Ditto.
	(maintenance_info_psymtabs): Ditto.
	* windows-nat.c (handle_load_dll): Ditto.
	(handle_unload_dll, info_w32_command, handle_exception): Ditto.
	* xtensa-tdep.c (xtensa_unwind_pc): Ditto.

2009-04-17  Joseph Myers  <joseph@codesourcery.com>

	* configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
	--enable-64-bit-bfd.
	(sparc-*-linux*): Likewise.

2009-04-17  Eli Zaretskii  <eliz@gnu.org>

	* go32-nat.c (go32_sysinfo): Update list of Windows versions of
	the NT family.

2009-04-16  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_query_attached): Fix pasto in packet_ok result
	checking.

2009-04-16  Joel Brobecker  <brobecker@adacore.com>

	* procfs.c (solib_mappings_callback, find_memory_regions_callback):
	Revert the previous change.  Might not be correct, actually.

2009-04-16  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
	(ada_get_current_task, ada_print_exception_breakpoint_nontask)
	(ada_print_exception_breakpoint_task, ada_reset_thread_registers):
	Remove declaration. These are non-existent functions.

2009-04-16  Joel Brobecker  <brobecker@adacore.com>

	* procfs.c (solib_mappings_callback, find_memory_regions_callback):
	Fix a compilation warning on mips-irix due to casting from
	a pointer of different size.

2009-04-16  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (symtab_for_sym): Delete.
	(user_select_syms): Use sym->symtab instead of calling symtab_for_sym.

2009-04-16  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (extract_string): Delete.
	(ada_main_name): Reimplement using target_read_string instead of
	extract_string.

2009-04-16  Andreas Schwab  <schwab@linux-m68k.org>

	* m68klinux-nat.c: Remove obsolete comment.
	(fetch_register, store_register): Don't call
	gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
	which are always nops here.

2009-04-14  Tom Tromey  <tromey@redhat.com>

	* c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
	(c_printstr): Likewise.
	* charset.c: Include gdb_wait.h.
	(make_wchar_iterator): Use INTERMEDIATE_ENCODING.
	(find_charset_names): Use pexecute.  Handle libiconv's output.
	Detect errors.
	(_initialize_charset): Use xstrdup.
	* gdb_wchar.h: Check HAVE_BTOWC.  Split PHONY_ICONV and wchar
	cases.
	(INTERMEDIATE_ENCODING): New define.
	* configure, config.in: Rebuild.
	* configure.ac: Check for btowc.

2009-04-15  Tom Tromey  <tromey@redhat.com>

	* c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.

2009-04-15  Eli Zaretskii  <eliz@gnu.org>

	* utils.c (parse_escape): Initialize target_char to pacify GCC.

2009-04-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* c-lang.c (c_get_string): Fix xfree crash on a failed string read.

2009-04-14  Pierre Muller  <muller@ics.u-strasbg.fr>

	ARI fix: sprintf rule.
	* ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
	* ada-lang.c (add_angle_brackets): Use xstrprintf.
	(ada_decode): Replace sprintf by xsnprintf.
	(find_old_style_renaming_symbol): Ditto.
	(ada_to_fixed_type_1, ada_enum_name): Ditto.


2009-04-14  Joel Brobecker  <brobecker@adacore.com>

	* target.c (target_mourn_inferior): Call bfd_cache_close_all
	after having executed the target mourn_inferior routine.

2009-04-14  Eli Zaretskii  <eliz@gnu.org>

	* config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
	undefined.

2009-04-13  David Daney  <ddaney@caviumnetworks.com>

	* infrun.c (maybe_software_singlestep): New function.
	(resume): Call maybe_software_singlestep.
	(handle_inferior_event): Same.

2009-04-13  Tom Tromey  <tromey@redhat.com>

	* python/python-frame.c (frapy_richcompare): Return
	Py_NotImplemented, not an error.  Handle Py_NE as well.

2009-04-13  Eli Zaretskii  <eliz@gnu.org>

	* charset.c (EILSEQ): Define if not defined by system headers.

2009-04-11  Eli Zaretskii  <eliz@gnu.org>

	* config/djgpp/config.sed: Tweak ac_config_files in intl/configure
	to be consistent with renaming config.intl.in into config_intl.in.

	* go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
	consistent with the change from 2008-11-09.

2009-04-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdbtypes.c: Remove excessive parentheses at the return keywords.
	* varobj.c (varobj_invalidate): Fix indentation.
	* varobj.c (varobj_invalidate): Fix formatting text width.

2009-04-08  Vladimir Prus  <vladimir@codesourcery.com>

	Implement -exec-jump.

	* mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
	* mi/mi-main.c (mi_cmd_exec_jump): New.
	* mi/mi-cmds.c (mi_cmds): Register exec-jump.

2009-04-07  Doug Evans  <dje@google.com>

	* symfile.c (symbol_file_clear): Fix indentation.

2009-04-06  Mark Kettenis  <kettenis@gnu.org>

	* sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.

2009-04-03  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
	(ppc_linux_auxv_parse): New function.
	(ppc_linux_read_description): Use ppc_linux_target_wordsize.
	(_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.

2009-04-03  Ulrich Weigand  <uweigand@de.ibm.com>

	* spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
	BFD to contents of SPU name note.
	(spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
	with "from_tty" argument 1 instead of 0.

2009-04-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* dwarf2read.c
	(new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
	Create the symbol in local scope.
	* symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.

2009-04-02  Keith Seitz  <keiths@redhat.com>

	* stabsread.c (read_member_functions): GCC may emit an extra space
	at the end of the names "__base_ctor" and "__base_dtor"; so ignore
	whitespace when looking for these functions.

2009-04-01  Joel Brobecker  <brobecker@adacore.com>

	Change the default value for "set print frame-arguments" to scalars.

	* stack.c (print_frame_arguments): Set initial value to "scalars".

2009-04-01  Aleksandar Ristovski  <aristovski@qnx.com>

	* mips-tdep.c (mips_numeric_register_alieses): New definition.
	(mips_gdbarch_init): Add user registers from 
	mips_numeric_register_aliases.

2009-04-01  Joel Brobecker  <brobecker@adacore.com>

	* linux-nat.c (linux_nat_filter_event): Minor comment reformatting.

2009-04-01  Joel Brobecker  <brobecker@adacore.com>

	* linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
	this is the last one.

2009-04-01  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (append_resumption): New.
	(remote_vcont_resume): Use it.

2009-04-01  Joel Brobecker  <brobecker@adacore.com>

	* windows-nat.c (+windows_get_ada_task_ptid): New function.
	(init_windows_ops): Set windows_ops.to_get_ada_task_ptid.

2009-03-31  Daniel Jacobowitz  <dan@codesourcery.com>
	    Keith Seitz  <keiths@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR gdb/6817
	* Makefile.in (dbxread.o): Update.
	* dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
	* dwarf2read.c (GDB_FORM_cached_string): New.
	(read_partial_die): Use dwarf2_canonicalize_name.
	(dwarf2_linkage_name): Use dwarf2_name.
	(dwarf2_canonicalize_name): New.
	(dwarf2_name): Use dwarf2_canonicalize_name.
	(dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
	* stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
	* symtab.c (lookup_symbol_in_language): Canonicalize input before
	searching.
	* cp-name-parser.y: operator() requires two parameters,
	according to libiberty.
	* minsyms.c (lookup_minimal_symbol): Canonicalize input
	before searching.
	* NEWS: Update.

2009-03-31  Joel Brobecker  <brobecker@adacore.com>

	Provide support for (Ada) task-specific breakpoints.

	* ada-lang.h (ada_get_task_number): Add declaration.
	(breakpoint_ada_task_match): Delete declaration.
	* ada-tasks.c (ada_get_task_number): Make non-static.
	* breakpoint.h (struct breakpoint): Add field "task".
	* breakpoint.c (print_one_breakpoint_location): Add handling of
	task-specific breakpoints.
	(create_breakpoint, create_breakpoints, find_condition_and_thread):
	New parameter "task".
	(break_command_really): Update calls to find_condition_and_thread
	and create_breakpoints.
	(breakpoint_re_set_one): Update call to find_condition_and_thread.
	Set b->task.

2009-03-31  Joel Brobecker  <brobecker@adacore.com>

	* ada-tasks.c (short_task_info): Eliminate the "Running" task state.

2009-03-31  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_notice_new_inferior): Use ptid_is_pid.  Check
	if the thread's ptid without a thread id field is in the list
	before calling thread_change_ptid.
	(extended_remote_attach_1): In non-stop mode, do not rely on
	querying the current thread, instead, query the thread list, and
	select the first thread of the process.
	* gdbthread.h (first_thread_of_process): Declare.
	* thread.c (first_thread_of_process): Define.

2009-03-30  Stan Shebs  <stan@codesourcery.com>

	Make tracepoints into a type of breakpoint.
	* breakpoint.h (enum bptype): Add bp_tracepoint.
	(struct breakpoint): Add fields step_count, pass_count, actions.
	(get_tracepoint, get_tracepoint_by_number): Declare.
	(all_tracepoints): Declare.
	* breakpoint.c: Include tracepoint.h, readline.h.
	(ALL_TRACEPOINTS): Move here from tracepoint.c.
	(tracepoint_count): Ditto.
	(should_be_inserted): GDB does not insert tracepoints itself.
	(print_it_typical): Add tracepoint case.
	(bpstat_what): Ditto.
	(print_one_breakpoint_location): Ditto, and add printing for
	pass count, step count, and action list.
	(user_settable_breakpoint): Add tracepoint case.
	(allocate_bp_location): Ditto.
	(set_breakpoint_location_function): Ditto.
	(disable_breakpoints_in_shlibs): Ditto.
	(mention): Ditto.
	(break_command_really): Add argument traceflag, use to choose
	basic breakpoint type.
	(break_command_1): Pass extra argument.
	(set_breakpoint, handle_gnu_v3_exceptions): Ditto.
	(breakpoint_re_set_one): Add tracepoint case.
	(disable_command, enable_command): Ditto.
	(set_tracepoint_count): Move here from tracepoint.c.
	(trace_command): Move here from tracepoint.c and use
	break_command_really.
	(tracepoints_info): Move here from tracepoint.c and call
	breakpoints_info.
	(enable_trace_command): Move here from tracepoint.c and call
	enable_command.
	(disable_trace_command): Move here from tracepoint.c and call
	disable_command.
	(delete_trace_command): Move here from tracepoint.c and call
	delete_breakpoint.
	(trace_pass_command): Move here from tracepoint.c.
	(get_tracepoint_by_number): Ditto.
	(tracepoint_save_command): Ditto.
	(get_tracepoint): New function.
	(all_tracepoints): New function.
	(_initialize_breakpoint): Move tracepoint init from tracepoint.c,
	deprecate "enable trace" and "disable trace" commands.
	* tracepoint.h (struct tracepoint): Remove.
	(tracepoint_chain): Remove decl.
	(deprecated_create_tracepoint_hook): Remove decl.
	(deprecated_delete_tracepoint_hook): Remove decl.
	(deprecated_modify_tracepoint_hook): Remove decl.
	(ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
	(free_actions): Update signature.
	(validate_actionline): Update signature.
	(end_actions_pseudocommand): Declare.
	(while_stepping_pseudocommand): Declare.
	* tracepoint.c: Include breakpoint.h.
	(tracepoint_chain, tracepoint_count): Remove.
	(free_actions, make_cleanup_free_actions): Update signature.
	(trace_command, set_raw_tracepoint): Remove.
	(trace_mention): Remove.
	(tracepoints_info): Remove.
	(tracepoint_operation, map_args_over_tracepoints): Remove.
	(get_tracepoint_by_number): Remove.
	(enable_trace_command, disable_trace_command): Remove.
	(delete_trace_command, trace_pass_command): Remove.
	(trace_actions_command, read_actions): Update signature.
	(validate_actionline): Update signature, use bp loc.
	(encode_actions): Ditto.
	(download_tracepoint): New function, body of trace_start_command.
	(trace_start_command): Call it, use all_tracepoints.
	(tracepoint_save_command): Remove.
	(tracepoint_dump_command): Use get_tracepoint.
	(end_actions_pseudocommand): Make globally visible.
	(while_stepping_pseudocommand): Ditto.
	(_initialize_tracepoint): Move command definitions to breakpoint.c.

2009-03-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	Expose frames to Python.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
	(SUBDIR_PYTHON_SRCS): Add python-frame.c.
	(python-frame.o): New target.
	* python/python-frame.c: New file.
	* python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
	gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
	gdbpy_initialize_frames): New prototypes.
	* python/python.c (_initialize_python): Call gdbpy_initialize_frames.
	(GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
	entries.
	* stack.c (find_frame_funname): New function, factored out of
	print_frame.
	(print_frame): Call find_frame_funname.
	* stack.h (find_frame_funname): Add prototype.

2009-03-29  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	Remove unused value_object attribute `owned_by_gdb'.
	* python/python-value.c (value_object): Remove owned_by_gdb
	attribute.
	(valpy_dealloc): Remove reference to self->owned_by_gdb.
	(valpy_new): Likewise.
	(value_to_value_object): Likewise.

2009-03-29  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	Change gdb.Value.address from a method to an attribute.
	* python/python-value.c (value_object): Add `address' element.
	(valpy_dealloc): Decrement reference to self->address if set.
	(valpy_new): Initialize val_obj->address.
	(valpy_address): Rename to ...
	(valpy_get_address): ... this.  Change signature from method to
	attribute.  Update self->address if not set.
	(value_to_value_object): Initialize val_obj->address.
	(value_object_getset): Add `address' element.
	(value_object_methods): Remove `address' element.

2009-03-29  Andreas Schwab  <schwab@linux-m68k.org>

	* observer.sh: Set LANG/LC_ALL to C, not c.

2009-03-28  Kevin Buettner  <kevinb@redhat.com>

	* mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
	`char' is unsigned.

2009-03-28  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_stop_ns): If multi-process extensions are off,
	and GDB is requesting the whole process to stop, sent "vCont;t",
	not "vCont;t:-1"

2009-03-28  Pedro Alves  <pedro@codesourcery.com>

	* inf-loop.c (inferior_event_handler): Avoid calling is_running on
	null inferior_ptid.

2009-03-27  Eli Zaretskii  <eliz@gnu.org>

	* config/djgpp/fnchange.lst: Update to fix ARI-reported problems.

2009-03-26  Doug Evans  <dje@google.com>

	* thread.c (do_restore_current_thread_cleanup): Redo test for
	whether to restore old->inferior_ptid.

2009-03-26  Tom Tromey  <tromey@redhat.com>

	* breakpoint.c (resolve_sal_pc): Preserve original line number
	when skipping prologue.

2009-03-26  Doug Evans  <dje@google.com>

	* thread.c (inferior_thread) Remove "extern" in definition.

2009-03-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	Add gdb.Value.is_optimized_out attribute.
	* python/python-value.c (valpy_get_is_optimized_out): New
	function.
	(value_object_getset): New variable.
	(value_object_type): Initialize tp_getset element.

2009-03-26  Joel Brobecker  <brobecker@adacore.com>

	Recognize missing DW_AT_location as <value optimized out>.
	* dwarf2read.c
	(new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
	Call add_symbol_to_list.

2009-03-25  Tom Tromey  <tromey@redhat.com>

	* gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
	* stack.c (print_this_frame_argument_p): Use check_typedef.

2009-03-25  Tom Tromey  <tromey@redhat.com>

	* configure: Rebuild.
	* acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
	Rearrange flags setting.  Add comments.

2009-03-25  Pierre Muller  <muller@ics.u-strasbg.fr>

	* config/i386/nm-i386.h: Remove code within
	I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
	* config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
	macro.
	* config/i386/nm-cygwin64.h: Ditto.
	* config/i386/nm-fbsd.h: Ditto.
	* config/i386/nm-go32.h: Ditto.
	* config/i386/nm-linux.h: Ditto.
	* config/i386/nm-linux64.h: Ditto.

2009-03-25  Pierre Muller  <muller@ics.u-strasbg.fr>

	ARI fix: "xasprintf" rule.
	* printcmd.c (sym_info): Replace xasprintf by xstrprintf.

2009-03-25  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_start_remote): In non-stop mode, call
	init_wait_for_inferior before adding threads and inferiors.

2009-03-25  Joel Brobecker  <brobecker@adacore.com>

	* breakpoint.c (breakpoint_thread_match): Split a large condition
	into several smaller conditions.  No behavior change.

2009-03-25  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (infrun_thread_thread_exit): New.
	(_initialize_infrun): Attach it to the thread_exit observer.
	* thread.c (delete_thread_1): Always call the observer, passing it
	the silent flag.
	* mi/mi-interp.c (mi_thread_exit): Add "silent" parameter.  If
	SILENT, return immediately.

2009-03-25  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (normal_stop): Use has_stack_frames instead of
	target_has_stack.
	* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
	when there is no thread selected.
	(mi_cmd_execute): Don't special case commands that can run without
	a valid selected thread.
	* top.c (execute_command): Don't special case commands that can
	run without a valid selected thread.  Use has_stack_frames.
	* infcmd.c (ensure_valid_thread): New.
	(continue_1, step_1, jump_command, signal_command): Use it.
	(detach_command): Error out if there's no selected thread/inferior.
	* thread.c (print_thread_info): Allow having no thread selected.
	(switch_to_thread): Don't read the PC if there is no current thread.
	(do_restore_current_thread_cleanup): Don't record the current
	frame if there is no current thread.
	(make_cleanup_restore_current_thread): Don't read frame info if
	there is no selected thread.
	(_initialize_thread): Don't mark commands as
	"no_selected_thread_ok".
	* frame.c (get_current_frame): Error out if there is no valid
	selected thread.
	(has_stack_frames): Return false if there is no valid
	selected thread.
	* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
	"no_selected_thread_ok".
	* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
	(get_cmd_no_selected_thread_ok): Delete.
	* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
	(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
	Delete declaration.
	* stack.c (get_selected_block): Use has_stack_frames.

2009-03-25  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	Fix size of FPSCR in Power 7 processors.
	* ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
	(PPC_FEATURE_HAS_DFP): New #define.
	(ppc_linux_read_description): Check for DFP feature instead of
	ISA 2.05 to decide on size of the FPSCR.

2009-03-25  Kevin Buettner  <kevinb@redhat.com>

	* mn10300-tdep.c (trad-frame.h): Don't include.
	(prologue-value.h): Include.
	(mn10300_frame_unwind_cache, set_reg_offsets): Delete.
	(struct mn10300_prologue): Define.
	(push_reg, translate_rreg, check_for_saved): New functions.
	(mn10300_analyze_prologue): Rewrite, using prologue-value
	machinery.  Handle more instructions than before.  Permit
	instructions to occur in any order.
	(mn10300_skip_prologue): Find the extents of the function
	in question; mn10300_analyze_prologue no longer does this.
	(mn10300_analyze_frame_prologue): New function.
	(mn10300_frame_base): New function.
	(mn10300_frame_this_id): Rewrite, no longer using trad-frame
	implementation.
	(mn10300_frame_prev_register): Likewise.
	(mn10300_frame_base_address, mn10300_frame_base struct): Delete.
	(mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
	`this_frame'.
	(mn10300_frame_unwind_init): Don't call frame_base_set_default().

2009-03-25  Pierre Muller  <muller@ics.u-strasbg.fr>

	Fix completer problem for filename completion on the first try.

	* gdb/completer.h (gdb_completion_word_break_characters): New function.
	* gdb/completer.c: Include gdb_assert.h.
	(complete_line_internal_reason): New enum.
	(complete_line_internal): Change last argument type to
	complete_line_internal_reason.
	Modify function to handle the different complete_line_internal_reason
	argument values.
	(complete_line): Adapt to change in complete_line_internal.
	(command_completer): Ditto.
	(gdb_completion_word_break_characters): Implement new function.
	* top.c (init_main): Set  rl_completion_word_break_hook to
	gdb_completion_word_break_characters.


2009-03-25  Pierre Muller  <muller@ics.u-strasbg.fr>

	ARI fix: "strlen d_name" rule.
	* linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.


2009-03-24  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <pedro@codesourcery.com>

	* configure, config.in: Rebuild.
	* configure.ac: Check for libiconvlist.
	* charset.c: Check HAVE_LIBICONVLIST.
	* acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
	LIBICONV_LIBDIR.  Update CPPFLAGS and LIBS.
	* Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
	Remove.
	(INTERNAL_CFLAGS_BASE): Update.
	(INTERNAL_LDFLAGS): Update.
	(CLIBS): Update.

2009-03-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* configure.ac: Initialize the variable $PREFER_CURSES.
	* configure: Regenerated.

2009-03-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
	* configure: Regenerated.

2009-03-24  Pierre Muller  <muller@ics.u-strasbg.fr>

	ARI fix: "strerror" rule.
	* darwin-nat.c (darwin_ptrace): Use safe_strerror.
	(darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
	before looking up the fields inside our struct type.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
	trying to resolve the type qualification.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
	we try to apply the attribute on the real type, rather than
	its associated typedef.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
	to make sure we try to get the modulus of the actual type, not the
	associated typedef.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
	[OP_ATR_LENGTH]: When using the attribute on a type, make sure
	to get the real type, not the associated typedef.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_get_field_index): Add handling of the case
	when TYPE is a typedef of a struct.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	Add gdb_usleep as a portable version of usleep based on gdb_select.
	* gdb_usleep.h, gdb_usleep.c: New files.
	* Makefile.in (SFILES): Add gdb_usleep.c.
	(HFILES_NO_SRCDIR): Add gdb_usleep.h.
	(COMMON_OBS): Add gdb_usleep.o.
	* ser-unix.c (hardwire_send_break): Replace call to gdb_select
	by call to gdb_usleep.

2009-03-23  Joel Brobecker  <brobecker@adacore.com>

	* buildsym.c (end_symtab): If we ignore the subfiles, then
	unlink the associated symtabs if they were already allocated.

2009-03-23  Jerome Guitton  <guitton@adacore.com>

	Provide a way to force building of GDB with libcurses.
	* configure.ac: Add --with-curses.
	* configure: Regenerated.

2009-03-23  Tom Tromey  <tromey@redhat.com>

	* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
	error message.

2009-03-23  Paul Pluzhnikov  <ppluzhnikov@google.com>

	* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
	solib_contains_address_p instead of searching.

2009-03-23  Tom Tromey  <tromey@redhat.com>

	* charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
	(iconv): Make 'inbuf' argument const.
	(convert_between_encodings): Use ICONV_CONST.
	(wchar_iterate): Likewise.

2009-03-22  Christopher Faylor  <me+cygwin@cgf.cx>

	* windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
	dynamically loaded function.
	(LookupPrivilegeValueA): Ditto.
	(OpenProcessToken): Ditto.
	(AdjustTokenPrivileges): Rename and define placeholder for address of
	dynamically loaded function.
	(LookupPrivilegeValueA): Ditto.
	(OpenProcessToken): Ditto.
	(set_process_privilege): Remove check for loaded functions.
	(bad_OpenProcessToken): Define.
	(_initialize_loadable): Load token functions from advapi here, setting
	OpenProcessToken function to a dummy static function which always return
	error if OS doesn't support this functionality.

2009-03-22   Nicolas Roche  <roche@adacore.com>
	     Christopher Faylor <me+cygwin@cgf.cx>

	* win32-nat.c (ctrl_c_handler): New function.
	(win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
	is run in a separate console.

2009-03-22  Christopher Faylor  <me+cygwin@cgf.cx>

	* windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
	for dynamically loaded function.
	(DebugBreakProcess): Ditto.
	(DebugSetProcessKillOnExit): Ditto.
	(EnumProcessModules): Ditto.
	(GetModuleFileNameExA): Ditto.
	(GetModuleInformation): Ditto.
	(DebugActiveProcessStop): Rename and define placeholder for address of
	dynamically loaded function.
	(DebugBreakProcess): Ditto.
	(DebugSetProcessKillOnExit): Ditto.
	(EnumProcessModules): Ditto.
	(GetModuleFileNameExA): Ditto.
	(GetModuleInformation): Ditto.
	(psapi_loaded): Delete.
	(get_module_name): Don't check psapi_loaded, just rely on the fact that
	dynamically loaded functions will return failure if they weren't
	previously found.
	(has_detach_ability): Delete.
	(windows_attach): Remove call to has_detach_ability ().  Just rely on
	functions being callable.
	(bad_DebugActiveProcessStop): Define.
	(bad_DebugBreakProcess): Ditto.
	(bad_DebugSetProcessKillOnExit): Ditto.
	(bad_EnumProcessModules): Ditto.
	(bad_GetModuleFileNameExA): Ditto.
	(bad_GetModuleInformation): Ditto.
	(_initialize_loadable): Rename from _initialize_psapi.  Initialize all
	dynamic storage here, setting nonexistent functions to dummy static
	functions which always return error.

2009-03-22  Pedro Alves  <pedro@codesourcery.com>

	* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
	to the about_to_proceed observer notification.
	(mi_about_to_proceed): New.
	(mi_on_resume): Only output ^running and the prompt here if the
	target was proceeded.
	* breakpoint.c (breakpoint_proceeded): New static.
	(breakpoint_about_to_proceed): New.
	(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
	the about_to_proceed observer notification.
	* inferior.h (breakpoint_proceeded): Delete declaration.
	* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
	Notify the about_to_proceed observers.
	(struct inferior_status): Delete breakpoint_proceeded member.
	(save_inferior_status): Don't save it.
	(restore_inferior_status): Don't restore it.
	* mi-main.h (mi_proceeded): Declare.
	* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
	a command.

2009-03-22  Pedro Alves  <pedro@codesourcery.com>

	* gdbthread.h (struct thread_info): Add in_infcall member.
	* infcall.c (run_inferior_call): Save, set and restore in_infcall.
	Remove reverences to suppress_resume_observer.  Refresh
	`call_thread' after returning from `proceed'.
	* infcmd.c (suppress_resume_observer): Delete.
	* inferior.h (suppress_resume_observer): Delete declaration.
	* mi/mi-interp.c (mi_on_resume): Suppress output while calling an
	inferior function.
	* thread.c (set_running): Remove references to
	suppress_resume_observer.
	* infrun.c (struct inferior_status): Add in_infcall member.
	(save_inferior_status): Save it.
	(restore_inferior_status): Restore it.

2009-03-22  Pedro Alves  <pedro@codesourcery.com>

	* infcall.c (run_inferior_call): Remove references to
	suppress_stop_observer.
	* infcmd.c (suppress_stop_observer): Delete.
	(finish_command_continuation): Remove NOTE.  Don't clear
	suppress_stop_observer anymore.
	(finish_command_continuation_free_arg): Likewise.
	(finish_forward): Remove references to suppress_stop_observer.
	Call normal_stop observer if we haven't already.
	* inferior.h (suppress_stop_observer): Delete.
	* infrun.c (normal_stop): When deciding to suppress the
	normal_stop observer, check for proceed_to_finish instead of
	suppress_stop_observer.

2009-03-22  Pedro Alves  <pedro@codesourcery.com>

	* symfile.c (symfile_relocate_debug_section): Remove check for
	SEC_DEBUGGING.

2009-03-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Jim Blandy  <jimb@red-bean.com>
	    Thiago Jung Bauermann  <bauerman@br.ibm.com>
	    Tom Tromey  <tromey@redhat.com>

	Miscellaneous fixes to the Python code.
	* python/python-cmd.c (cmdpy_init): Accept keyword
	arguments.
	* python/python-value.c (valpy_string): Accept keyword
	arguments.
	(valpy_binop): Use `break' to exit from the TRY_CATCH block.
	Do not call value_to_value_object on NULL RES_VAL.
	(value_object_methods): Change `string' entry to also accept
	keyword arguments.
	(convert_value_from_python): Return a copy of the value if obj is
	a gdb.Value object.
	(value_object_methods): Mark the `string' method as accepting
	keywords, and show method "prototype" in the doc string.
	* python/python.c (get_parameter): Don't return inside a
	TRY_CATCH.

2009-03-20  Tom Tromey  <tromey@redhat.com>

	Add support for convenience functions in Python.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
	(SUBDIR_PYTHON_SRCS): Add python-function.c.
	(python-function.o): New target.
	* eval.c: Include "python/python.h" and <ctype.h>.
	(evaluate_subexp_standard): Handle values of type
	TYPE_CODE_INTERNAL_FUNCTION.
	* gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
	* parse.c (write_exp_string): Remove duplicate word in comment.
	* python/python-function.c: New file.
	* python/python-internal.h (gdbpy_initialize_functions): Add
	prototype.
	* python/python.c (_initialize_python): Call
	gdbpy_initialize_functions.
	* valprint.c (value_check_printable): Handle values of type
	TYPE_CODE_INTERNAL_FUNCTION.
	* value.c: Include "cli/cli-decode.h".
	(internal_function): New struct.
	(functionlist, internal_fn_type): New static variables.
	(lookup_only_internalvar,
	lookup_internalvar): Add const qualifier to name argument.
	(create_internalvar): Likewise.  Initialize new field.
	(set_internal_var): Fix typo in comment.  Don't allow assignment
	to canonical variable.
	(value_create_internal_function, value_internal_function_name,
	call_internal_function, function_command, function_destroyer,
	add_internal_function): New functions.
	(_initialize_values): Create `function' placeholder command.
	Initialize internal_fn_type.
	* value.h (lookup_only_internalvar, create_internalvar,
	lookup_internalvar): Add const qualifier to name argument.
	(internal_function_fn, add_internal_function, call_internal_function,
	value_internal_function_name): Add prototypes.
	(struct internalvar) <canonical>: New field.

2009-03-20  Tom Tromey  <tromey@redhat.com>

	* c-lang.c (evaluate_subexp_c): Call check_typedef.

2009-03-20  Tom Tromey  <tromey@redhat.com>
	    Julian Brown  <julian@codesourcery.com>

	PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
	PR i18n/9401, PR exp/9613:
	* NEWS: Update
	* value.h (value_typed_string): Declare.
	(val_print_string): Update.
	* valprint.h (print_char_chars): Update.
	* valprint.c (print_char_chars): Add type argument.  Update.
	(val_print_string): Likewise.
	* valops.c (value_typed_string): New function.
	* utils.c (host_char_to_target): New function.
	(parse_escape): Use host_char_to_target, host_hex_value.  Update.
	Remove '^' case.
	(no_control_char_error): Remove.
	* typeprint.c (print_type_scalar): Update.
	* scm-valprint.c (scm_scmval_print): Update.
	* scm-lang.h (scm_printchar, scm_printstr): Update.
	* scm-lang.c (scm_printchar): Add type argument.
	(scm_printstr): Likewise.
	* printcmd.c (print_formatted): Update.
	(print_scalar_formatted): Update.
	(printf_command) <wide_string_arg, wide_char_arg>: New constants.
	Handle '%lc' and '%ls'.
	* parser-defs.h (struct typed_stoken): New type.
	(struct stoken_vector): Likewise.
	(write_exp_string_vector): Declare.
	* parse.c (write_exp_string_vector): New function.
	* p-valprint.c (pascal_val_print): Update.
	* p-lang.h (is_pascal_string_type, pascal_printchar,
	pascal_printstr): Update.
	* p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
	Add 'char_type' argument.
	(pascal_emit_char): Add type argument.
	(pascal_printchar): Likewise.
	(pascal_printstr): Likewise.
	* objc-lang.c (objc_emit_char): Add type argument.
	(objc_printchar): Likewise.
	(objc_printstr): Likewise.
	* macroexp.c (get_character_constant): Handle unicode characters.
	Use c_parse_escape.
	(get_string_literal): Handle unicode strings.  Use
	c_parse_escape.
	* m2-valprint.c (print_unpacked_pointer): Update.
	(m2_print_array_contents): Update.
	(m2_val_print): Update.
	* m2-lang.c (m2_emit_char): Add type argument.
	(m2_printchar): Likewise.
	(m2_printstr): Likewise.
	* language.h (struct language_defn) <la_printchar>: Add type
	argument.
	<la_printstr, la_emitchar>: Likewise.
	(LA_PRINT_CHAR): Likewise.
	(LA_PRINT_STRING): Likewise.
	(LA_EMIT_CHAR): Likewise.
	* language.c (unk_lang_emit_char): Add type argument.
	(unk_lang_printchar): Likewise.
	(unk_lang_printstr): Likewise.
	* jv-valprint.c (java_val_print): Update.
	* jv-lang.c (java_emit_char): Add type argument.
	* f-valprint.c (f_val_print): Update.
	* f-lang.c (f_emit_char): Add type argument.
	(f_printchar): Likewise.
	(f_printstr): Likewise.
	* expprint.c (print_subexp_standard): Update.
	* charset.h (target_wide_charset): Declare.
	(c_target_char_has_backslash_escape, c_parse_backslash,
	host_char_print_literally, host_char_to_target,
	target_char_to_host, target_char_to_control_char): Remove.
	(enum transliterations): New type.
	(convert_between_encodings): Declare.
	(HOST_ESCAPE_CHAR): New define.
	(host_letter_to_control_character, host_hex_value): Declare.
	(enum wchar_iterate_result): New enum.
	(struct wchar_iterator): Declare.
	(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
	wchar_push_back): Declare.
	* charset-list.h: New file.
	* c-valprint.c (textual_name): New function.
	(textual_element_type): Handle wide character types.
	(c_val_print): Pass original type to textual_element_type.  Handle
	wide character types.
	(c_value_print): Use textual_element_type.  Pass original type of
	value to val_print.
	* c-lang.h (enum c_string_type): New type.
	(c_printchar, c_printstr): Update.
	* c-lang.c (classify_type): New function.
	(print_wchar): Likewise.
	(c_emit_char): Add type argument.  Handle wide characters.
	(c_printchar): Likewise.
	(c_printstr): Add type argument.  Handle wide and multibyte
	character sets.
	(convert_ucn): New function.
	(emit_numeric_character): Likewise.
	(convert_octal): Likewise.
	(convert_hex): Likewise.
	(ADVANCE): New macro.
	(convert_escape): New function.
	(parse_one_string): Likewise.
	(evaluate_subexp_c): Likewise.
	(exp_descriptor_c): New global.
	(c_language_defn): Use exp_descriptor_c.
	(cplus_language_defn): Likewise.
	(asm_language_defn): Likewise.
	(minimal_language_defn): Likewise.
	(charset_for_string_type): New function.
	* c-exp.y (%union): Add 'svec' and 'tsval'.
	(CHAR): New token.
	(exp): Add CHAR production.
	(string_exp): Rewrite.
	(exp) <string_exp>: Rewrite.
	(tempbuf): Now global.
	(tempbuf_init): New global.
	(parse_string_or_char): New function.
	(yylex) <tempbuf>: Now global.
	<tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
	Remove.
	Handle 'u', 'U', and 'L' prefixes.  Call parse_string_or_char.
	(c_parse_escape): New function.
	* auxv.c (fprint_target_auxv): Update.
	* ada-valprint.c (ada_emit_char): Add type argument.
	(ada_printchar): Likewise.
	(ada_print_scalar): Update.
	(printstr): Add type argument.  Update calls to ada_emit_char.
	(ada_printstr): Add type argument.
	(ada_val_print_array): Update.
	(ada_val_print_1): Likewise.
	* ada-lang.c (emit_char): Add type argument.
	* ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
	type arguments.
	* gdb_locale.h: Include langinfo.h.
	* charset.c (_initialize_charset): Set default host charset from
	the locale.  Don't register charsets.  Add target-wide-charset
	commands.  Call find_charset_names.
	(struct charset, struct translation): Remove.
	(GDB_DEFAULT_HOST_CHARSET): Remove.
	(GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
	(target_wide_charset_name): New global.
	(show_host_charset_name): Handle "auto".
	(show_target_wide_charset_name): New function.
	(host_charset_enum, target_charset_enum): Remove.
	(charset_enum): New global.
	(all_charsets, register_charset, lookup_charset, all_translations,
	register_translation, lookup_translation): Remove.
	(simple_charset, ascii_print_literally, ascii_to_control): Remove.
	(iso_8859_print_literally, iso_8859_to_control,
	iso_8859_family_charset): Remove.
	(ebcdic_print_literally, ebcdic_to_control,
	ebcdic_family_charset): Remove.
	(struct cached_iconv, check_iconv_cache, cached_iconv_convert,
	register_iconv_charsets): Remove.
	(target_wide_charset_be_name, target_wide_charset_le_name): New
	globals.
	(identity_either_char_to_other): Remove.
	(set_be_le_names, validate): New functions.
	(backslashable, backslashed, represented): Remove.
	(default_c_target_char_has_backslash_escape): Remove.
	(default_c_parse_backslash, iconv_convert): Remove.
	(ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
	ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
	iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
	ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
	ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
	ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
	(table_convert_char, table_translation, simple_table_translation):
	Remove.
	(current_host_charset, current_target_charset,
	c_target_char_has_backslash_escape_func,
	c_target_char_has_backslash_escape_baton): Remove.
	(c_parse_backslash_func, c_parse_backslash_baton): Remove.
	(host_char_to_target_func, host_char_to_target_baton): Remove.
	(target_char_to_host_func, target_char_to_host_baton): Remove.
	(cached_iconv_host_to_target, cached_iconv_target_to_host):
	Remove.
	(lookup_charset_or_error, check_valid_host_charset): Remove.
	(set_host_and_target_charsets): Remove.
	(set_host_charset, set_target_charset): Remove.
	(set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
	(set_target_wide_charset_sfunc): New function.
	(show_charset): Print target wide character set.
	(host_charset, target_charset): Rewrite.
	(target_wide_charset): New function.
	(c_target_char_has_backslash_escape): Remove.
	(c_parse_backslash): Remove.
	(host_letter_to_control_character): New function.
	(host_char_print_literally): Remove.
	(host_hex_value): New function.
	(target_char_to_control_char): Remove.
	(cleanup_iconv): New function.
	(convert_between_encodings): New function.
	(target_char_to_host): Remove.
	(struct wchar_iterator): Define.
	(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
	wchar_push_back): New functions.
	(do_cleanup_iterator): New function.
	(char_ptr): New typedef.
	(charsets): New global.
	(add_one, find_charset_names): New functions.
	(default_charset_names): New global.
	(auto_host_charset_name): Likewise.
	* aclocal.m4, config.in, configure: Rebuild.
	* configure.ac: Call AM_LANGINFO_CODESET.
	(GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
	(AM_ICONV): Invoke earlier.
	* acinclude.m4: Include codeset.m4.  Subst LIBICONV_INCLUDE and
	LIBICONV_LIBDIR.  Check for libiconv in build tree.
	* Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
	(INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
	(INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
	* gdb_obstack.h (obstack_grow_wstr): New define.
	* gdb_wchar.h: New file.
	* defs.h: Include it.

2009-03-20  Tom Tromey  <tromey@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	* dwarf2read.c (process_die): Handle DW_TAG_typedef.
	* eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
	typedef.
	* ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
	SYMBOL_TYPE result.
	* ada-typeprint.c (print_array_type): Do the NULL check
	unconditionally.

2009-03-19  Tom Tromey  <tromey@redhat.com>

	* utils.c (do_obstack_free): New function.
	(make_cleanup_obstack_free): Likewise.
	* defs.h (make_cleanup_obstack_free): Declare.

2009-03-18  Doug Evans  <dje@google.com>

	* linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
	int, not a long long.
	(linux_nat_info_proc_cmd): Store pid in long instead of long long.

	* expprint.c (dump_raw_expression): Print note if non-NULL.

	* printcmd.c (display_uses_solib_p): Redo loop, scan element list
	backwards.

2009-03-18  Nathan Sidwell  <nathan@codesourcery.com>

	* Makefile.in: Update license to GPLv3.
	* ada-exp.y: Update license to GPLv3.
	* ada-lex.l: Update license to GPLv3.
	* c-exp.y: Update license to GPLv3.
	* cp-name-parser.y: Update license to GPLv3.
	* darwin-nat-info.c: Update license to GPLv3.
	* f-exp.y: Update license to GPLv3.
	* gdb_thread_db.h: Update license to GPLv3.
	* hppanbsd-nat.c: Update license to GPLv3.
	* hppanbsd-tdep.c: Update license to GPLv3.
	* hppaobsd-tdep.c: Update license to GPLv3.
	* jv-exp.y: Update license to GPLv3.
	* m2-exp.y: Update license to GPLv3.
	* objc-exp.y: Update license to GPLv3.
	* p-exp.y: Update license to GPLv3.
	* reply_mig_hack.awk: Update license to GPLv3.
	* reverse.c: Update license to GPLv3.
	* xtensa-xtregs.c: Update license to GPLv3.

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_close): Don't call generic_mourn_inferior.
	(remote_mourn_1): Call generic_mourn_inferior after closing the
	target.

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (remote_start_remote): Add missing call to
	init_wait_for_inferior in non-stop mode.

2009-03-18  Pedro Alves  <pedro@codesourcery.com>

	* breakpoint.c (bpstat_should_step): Only consider software
	watchpoints that have a location.

2009-03-17  Joel Brobecker  <brobecker@adacore.com>

	Add a target_ops parameter to the to_kill method in struct target_ops.

	* target.h (struct target_ops): Add a "target_ops *" parameter to
	method to_kill.
	(target_kill): Remove macro. Add declaration.
	* target.c (debug_to_kill): Delete, no longer necessary.
	(target_kill): New function.
	(update_current_target):  Stop inheriting the to_kill method.
	Do not de_fault it to no_process either.
	(setup_target_debug): Do not set current_target.to_kill.
	* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
	linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
	remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
	accordingly.

2009-03-17  Doug Evans  <dje@google.com>

	* amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
	glibc 2.3.2 and earlier.

2009-03-17  Joel Brobecker  <brobecker@adacore.com>

	* frame.c (get_prev_frame_1): Do not perform the inner_frame
	sanity check if this_frame is not NORMAL.
	(frame_id_inner): Update the description of this function.

2009-03-17  Hui Zhu  <teawater@gmail.com>

	* stack.c: Change the introduce of "disassemble-next-line".

2009-03-17  Pedro Alves  <pedro@codesourcery.com>

	* mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
	declare as extern.

2009-03-17  Hui Zhu  <teawater@gmail.com>

	* stack.c: Include valprint.h.
	(disassemble_next_line): New enum.
	(show_disassemble_next_line): New function.  Show the current
	value of disassemble-next-line.
	(gdb_disassembly_stub_args): New struct for argument passing
	between function do_gdb_disassembly and function
	gdb_disassembly_stub.
	(gdb_disassembly_stub): New function.  Helper for
	gdb_disassembly.
	(do_gdb_disassembly): New function.  Use TRY_CATCH to catch
	the exception from the gdb_disassembly because it will be
	broken by filter sometime.
	(print_frame_info): If disassemble-next-line is set to auto
	or on and doesn't have the line debug messages for $pc,
	output the next instruction.
	If disassemble-next-line is set to on and there is line debug
	messages, output assembly codes for next line.
	(_initialize_stack): Make the "set disassemble-next-line"
	command an auto-boolean command.  Change its class to
	class_stack.  Place it in the top level set list.  Extend help
	to describe the auto mode.

2009-03-17  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (normal_stop): Don't overwrite old_chain.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

	* remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
	which is undefined, by call to regcache_invalidate, which should
	do what the original author wanted to do.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

	* remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
	(mips_create_inferior): Likewise.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

	* go32-nat.c (go32_create_inferior): Add missing ops parameter.

2009-03-16  Joel Brobecker  <brobecker@adacore.com>

	* darwin-nat.c (darwin_resume): Fix a compiler warning when
	building on x86_64-darwin.

2009-03-16  Tristan Gingold  <gingold@adacore.com>

	* configure.tgt: Add handling for x86_64-darwin.

2009-03-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

	* aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
	Use the ops parameter to get to the target beneath, rather than
	using the current_target global.  Using the current_target global
	was an unintended accident.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

	Fix an error happening while loading symbols from a core file
	(on AIX).

	* rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
	to detect whether we're debugging a core file or not.

2009-03-15  Joel Brobecker  <brobecker@adacore.com>

	Modernize the aix-thread later by getting rid of the base_target
	global.  This brings back to life the AIX port which was otherwise
	crashing all the time.

	* aix-thread.c (base_target): Delete.
	(pd_enable): Do not set base_target.
	(aix_thread_attach): Use find_target_beneath instead of base_target.
	(aix_thread_detach, aix_thread_resume, aix_thread_wait)
	(aix_thread_fetch_registers, aix_thread_store_registers),
	(aix_thread_xfer_partial, aix_thread_mourn_inferior)
	(aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
	(aix_thread_kill): Delete. Does not seem necessary.
	(init_aix_thread_ops): Do not set aix_thread_ops.to_kill.

2009-03-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* stack.c (return_command <retval_exp>): New variables retval_expr
	and old_chain.  Inline parse_and_eval to initialize retval_expr.  Check
	RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
	if RETURN_TYPE is NULL.

2009-03-14  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (PACKET_qAttached): New.
	(remote_query_attached): New.
	(remote_add_inferior): Add new `attached' argument.  Handle it.
	(remote_notice_new_inferior, remote_start_remote): Adjust to pass
	-1 to remote_add_inferior in new parameter.
	(extended_remote_attach_1): Adjust to pass 1 to
	remote_add_inferior in the new parameter.
	(extended_remote_create_inferior_1): Adjust to pass 0 to
	remote_add_inferior in the new parameter.
	(_initialize_remote): Add "set/show remote query-attached-packet"
	commands.

2009-03-13  Tom Tromey  <tromey@redhat.com>

	* symtab.c (lookup_symbol_in_language): Use a cleanup.

2009-03-13  Doug Evans  <dje@google.com>

	* exceptions.h: Clean up some comments on catch_exceptions usage.
	* exceptions.c: Ditto.  Plus mark catch_errors as superseded by
	catch_exceptions.

2009-02-17  Joel Brobecker  <brobecker@adacore.com>

	The following patch helps getting rid of a warning inside solib-som.c.

	* source.c (source_full_path_of): Constify parameter filename.
	* defs.h (source_full_path_of): Update declaration accordingly.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
	BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
	Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
	promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-tasks.c (ada_task_is_alive): Move up and make static.
	* ada-lang.h (ada_task_is_alive): Remove declaration.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

	* ada-lang.c (ada_delta): Change the type of numerators and
	denominators to DOUBLEST, as they may not fit into a long.
	(scaling_factor): Ditto.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

	* language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
	types, if we are unable to determine the actual symbol type
	from its tag, then use the static approximation instead.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	Fix crash printing packed record with packed array.

	* ada-lang.c (ada_modulus_from_name): New function.
	(ada_modulus): In the case where the type length is bigger than
	the size of the type used to hold the bounds, try determining
	the modulus from the type name.
	(ada_value_primitive_packed_val): Fix bug in the computation of
	ntarg causing an out-of-buffer invalid access.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	Fix segfault when printing short_integer'last.

	* ada-lang.c (ada_find_any_type): Search in the primitive types
	if a symbol could not be found.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	* ada-tasks.c (task_states,long_task_states): Add new states
	Activating and Acceptor_Delay_Sleep.  Update the description
	of state Acceptor_Sleep.

2009-03-12  Jonas Maebe <jonas.maebe@elis.ugent.be>  (obvious change)

	Fix a build failure on Darwin following some changes in
	the profile of some target_ops methods.

	* darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
	where missing.
	(darwin_stop_inferior, darwin_detach): Likewise.

2009-03-12  Vladimir Prus  <vladimir@codesourcery.com>

	Include token in ^running notification for CLI commands.

	* mi/mi-main.c (mi_execute_command): Set current_token here.
	(mi_cmd_execute): Do not set current_token here.

2009-03-12  Vladimir Prus  <vladimir@codesourcery.com>

	Fix MI timings.

	* mi/mi-main.c (mi_print_timing_maybe): New.
	(captured_mi_execute_command): Simplify. Output timings to
	CLI commands, too.
	(mi_execute_async_cli_command): Do not print timings.
	* mi/mi-main.h (mi_print_timing_maybe): Declare.
	* mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.

2009-03-12  Jerome Guitton  <guitton@adacore.com>

	* xcoffread.c (process_linenos): Check if the line in the
	include table refers to the main source file and, if so,
	add them to the main subfile.

2009-03-12  Joel Brobecker  <brobecker@adacore.com>

	Fix a build failure on AIX introduced after a change in the profile
	of some of the "methods" in the target_ops structure.
	* aix-thread.c: Add missing target_ops parameter throughout.

	Implement Ada task switching on AIX.
	* aix-thread.c (aix_thread_get_ada_task_ptid): New function.
	(init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.

2009-03-11  Daniel Jacobowitz  <dan@codesourcery.com>

	* breakpoint.c (bpstat_check_breakpoint_conditions): Use
	value_mark and value_free_to_mark.
	* objfiles.c (free_objfile): Call objfile_free_data before
	freeing the BFD.

2009-03-10  Hui Zhu  <teawater@gmail.com>

	* disasm.c (gdb_disassembly): Remove unused argument
	"line_num".
	* disasm.h (gdb_disassembly): Ditto.
	* cli/cli-cmds.c (print_disassembly): Ditto.
	* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.

2009-03-09  Paul Pluzhnikov  <ppluzhnikov@google.com>

	* solib.c (solib_contains_address_p): New function.
	(solib_name_from_address): Use it.
	* printcmd.c (display_uses_solib_p): Use it.
	* solib.h (solib_contains_address_p): Declare it.

2009-03-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* varobj.c (free_variable): Call value_free.

2009-03-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR gdb/9873:
	* dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
	Move the variable `macinfo_type' out of the loop.  Create a new
	processing pass before the current one to pre-create `current_file'.
	New complaint on misplaced zero/non-zero definitions/includes.
	Skip first DW_MACINFO_start_file with `at_commandline' set.

2008-03-09  Vladimir Prus  <vladimir@codesourcery.com>

       * solib.c (reload_shared_libraries): Give
       inferior a chance to reset solib breakpoint.
       Reinit frame cache.

2009-03-08  Christopher Faylor  <me+cygwin@cgf.cx>

	* windows-nat.c (dr): Redefine to use largest possible integer which
	holds a pointer.
	(cygwin_set_dr): Avoid coercion.

2009-03-08  Oswald Buddenhagen  <oswald.buddenhagen@trolltech.de>

	* windows-nat.c (windows_create_inferior): Implement --tty handling on
	non-cygwin.

2009-03-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

	Rename solib_address to solib_name_from_address.
	* breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
	(disable_breakpoints_in_unloaded_shlib): Update.
	* printcmd.c (display_uses_solib_p): Likewise.
	* stack.c (print_frame): Likewise.
	* solib.c: Rename.
	* solib.h: Rename.

2009-03-05  Paul Pluzhnikov  <ppluzhnikov@google.com>

	* printcmd.c (do_one_display): Reparse exp_string.
	(display_uses_solib_p): New function.
	(clear_dangling_display_expressions): New function.
	(_initialize_printcmd): Add observer.
	* solib.c (no_shared_libraries): Swap order of calls to
	clear_solib and objfile_purge_solibs.

2009-03-05  Joel Brobecker  <brobecker@adacore.com>

	Implement the target-specific part of Ada tasking support
	on Tru64.

	* dec-thread.c (dec_thread_get_ada_task_ptid): New function.
	(init_dec_thread_ops): Set the to_get_ada_task_ptid method.

2009-03-05  Joel Brobecker  <brobecker@adacore.com>

	Get rid of the global "base_target" and use "find_target_beneath"
	to find the underlying target.
	* dec-thread.c (base_target): Delete.
	(enable_dec_thread): Remove assignement to base_target.
	(dec_thread_detach, dec_thread_wait, dec_thread_wait)
	(dec_thread_fetch_registers, dec_thread_store_registers)
	(dec_thread_mourn_inferior, dec_thread_pid_to_str):
	Update the function profile if necessary.
	Use find_target_beneath to call the same method but from
	the underlying target, removing the need for "base_target".

	* dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
	Fix a copy/paste error in a few debug traces...

	* solib-osf.c (init_so): Use a simpler method for computing
	the size of lm_info structure. This also gets rid of warning
	emitted by the compiler.

2009-03-05  Pedro Alves  <pedro@codesourcery.com>

	* breakpoint.c (check_duplicates_for): Skip permanent breakpoints
	duplicates of permanent breakpoints.

2009-03-04  Pedro Alves  <pedro@codesourcery.com>

	* inferior.h (notice_new_inferior): Declare.
	* infcmd.c (notice_new_inferior): New.
	* remote.c (remote_add_inferior, remote_add_thread): New.
	(notice_new_inferiors): Rename to...
	(remote_notice_new_inferior): ... this.  Add RUNNING argument.
	Use remote_add_thread instead of add_thread, passing it the
	RUNNING argument.  Add an inferior with remote_add_inferior.  If
	we just learned about an inferior, call notice_new_inferior.
	(record_currthread): Adjust.
	(remote_threads_info): Adjust to use remote_notice_new_inferior.
	(remote_start_remote, extended_remote_attach_1): Use
	remote_add_inferior.
	(process_stop_reply): Adjust.  Call remote_notice_new_inferior
	after handling expedited registers and watchpoint state.
	(extended_remote_create_inferior_1): Use remote_add_inferior.

2009-03-04  Aleksandar Ristovski  <aristovski@qnx.com>

	* infcmd.c (registers_info): Remove register number case.

2009-03-03  Pedro Alves  <pedro@codesourcery.com>

	* top.c (quit_target): Check for target_has_execution before
	killing or detaching from inferiors.

2009-03-02  Joel Brobecker  <brobecker@adacore.com>

	Remove some unused routines.

	* ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
	Delete.
	* ada-lang.c (ada_task_list_iterator_ftype)
	(iterate_over_live_ada_tasks): Delete.
	* ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
	Delete.

2009-03-01  Doug Evans  <dje@google.com>

	* symtab.c: Remove trailing whitespace throughout the file.
	(expand_line_sal): Fix some typos and whitespace.

	* Makefile.in (clean): rm -f $(DEPDIR)/*.

	* Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
	(init.c): signals/ -> common/.
	(signals.o): Update.
	* target.h (target_signal_to_string,target_signal_to_string)
	(target_signal_from_name,target_signal_to_host_p)
	(target_signal_from_host,target_signal_to_host): Move to ...
	* common/gdb_signals.h: ... here.  New file.
	* common/signals.c: Moved here from signals/signals.c.
	#include gdb_signals.h, remove #include of target.h in gdb case.
	(target_signal_from_command,default_target_signal_to_host)
	(default_target_signal_from_host): Move inside #ifndef GDBSERVER.

	Include thread ID in target_wait debugging output.
	* infrun.c (print_target_wait_results): New function.
	(wait_for_inferior,fetch_inferior_event): Call it.

2009-02-27  Pedro Alves  <pedro@codesourcery.com>

	* gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
	with a ptid_t field.
	* linux-thread-db.c (thread_get_info_callback): Build the ptid
	using the pid stored in proc_handle.ptid.
	(thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
	(check_for_thread_db, thread_db_detach, check_event)
	(thread_db_mourn_inferior, find_new_threads_callback)
	(thread_db_find_new_threads_1): Adjust.
	* proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
	(ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.

2009-02-27  Phil Muldoon  <pmuldoon@redhat.com>

	* valprint.c (read_string): Rework clean-up logic. Use
	free_current_contents to clean-up buffer.

2009-02-27  Andreas Schwab  <schwab@linux-m68k.org>

	* MAINTAINERS: Update e-mail address.

2009-02-26  Phil Muldoon  <pmuldoon@redhat.com>

	* python/python-utils.c (python_string_to_unicode): Always return
	a new reference.
	(python_string_to_target_string): Decrement transient python
	instance.
	(python_string_to_host_string): Likewise.

2007-02-26  Pedro Alves  <pedro@codesourcery.com>

	* mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
	call to super_fetch_registers.
	(mips64_linux_store_registers): Pass `ops' to call to
	super_store_registers.

2009-02-25  Doug Evans  <dje@google.com>

	* breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
	error message.

	* breakpoint.c (disable_breakpoints_in_shlibs): Delete local
	disabled_shlib_breaks, unused.

	* printcmd.c (build_address_symbolic): Fix comment.

2009-02-25  Hui Zhu  <teawater@gmail.com>

	* cli/cli-script.c (define_command): Add _() to query.
	* gnu-nat.c (inf_validate_task_sc): Ditto.
	* infcmd.c (kill_if_already_running): Ditto.
	(jump_command): Ditto.
	(attach_command): Ditto.
	* inflow.c (kill_command): Ditto.
	* infrun.c (handle_command): Ditto.
	* maint.c (maintenance_dump_me): Ditto.
	* memattr.c (mem_delete_command): Ditto.
	* monitor.c (monitor_interrupt_query): Ditto.
	* nto-procfs.c (interrupt_query): Ditto.
	* printcmd.c (undisplay_command): Ditto.
	* remote-mips.c (mips_kill): Ditto.
	* remote.c (interrupt_query): Ditto.
	* solib-irix.c (irix_open_symbol_file_object): Ditto.
	* solib-osf.c (osf_open_symbol_file_object): Ditto.
	* solib-pa64.c (pa64_open_symbol_file_object): Ditto.
	* solib-som.c (som_open_symbol_file_object): Ditto.
	* solib-svr4.c (open_symbol_file_object): Ditto.
	* symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
	* target.c (kill_or_be_killed): Ditto.
	* tracepoint.c (delete_trace_command): Ditto.
	* top.c (quit_confirm): Add _() to s that will be used
	in query.

2009-02-24  Pierre Muller  <muller@ics.u-strasbg.fr>

	Fix windows-nat.c compilation failure.

	* windows-nat.c (windows_thread_alive): Fix forward declaration.
	(get_windows_debug_event): Add ops parameter to call to windows_resume.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

	* remote-sim.c (gdbsim_resume): Add target_ops* argument.

2009-02-23  Jay Krell  <jay.krell@cornell.edu>  (tiny change)

	* symtab.c (find_line_symtab): Initialize exact to avoid
	a compiler warning.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

	* i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
	`ops' to recursive call.

2009-02-23  Pedro Alves  <pedro@codesourcery.com>

	* corelow.c (get_core_registers): Adjust.
	(core_file_thread_alive): Rename to...
	(core_thread_alive): ... this.
	(core_pid_to_str): Try gdbarch_core_pid_to_str first.
	(init_core_ops): Adjust.
	(coreops_suppress_target): Delete.
	(_initialize_corelow): Unconditionally add core_ops.
	* procfs.c: Include "inf-child.h".
	(procfs_ops): Delete.
	(init_procfs_ops): Delete.  Reimplement as...
	(procfs_target): ... this, inheriting from inf-child.
	(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
	(procfs_prepare_to_store): Delete.
	(procfs_store_registers, procfs_resume): Adjust.
	(procfs_open): Delete.
	(procfs_suppress_run): Delete.
	(procfs_can_run): Delete.
	(procfs_mourn_inferior): Adjust.
	(procfs_init_inferior): Add target_ops parameter.  Adjust.
	(procfs_create_inferior): Don't pass procfs_init_inferior to
	fork_inferior.  Instead call it after fork_inferior returns.
	(procfs_find_new_threads): Adjust.
	(_initialize_procfs): Adjust to use procfs_target instead of
	init_procfs_ops.
	* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
	(lwp_to_thread): Use target_thread_alive.
	(sol_thread_open): Delete.
	(sol_thread_attach): Delete.
	(sol_thread_detach, sol_thread_resume, sol_thread_wait)
	(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
	to use find_target_beneath.
	(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
	(sol_thread_xfer_partial): Adjust to use find_target_beneath.
	(sol_thread_files_info, sol_thread_kill_inferior): Delete.
	(check_for_thread_db): New.
	(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
	(sol_thread_new_objfile): Call check_for_thread_db.
	(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
	(sol_thread_can_run): Delete.
	(sol_thread_alive): Adjust to use find_target_beneath.
	(sol_thread_stop): Delete.
	(rw_common): Use target_write_memory or target_read_memory.
	(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
	(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
	(solaris_pid_to_str): Remove check for libthread_db initialization
	failing.
	(sol_find_new_threads): Remove check for libthread_db
	initialization failing, or for an invalid inferior_ptid.  Adjust
	to use find_target_beneath.
	(sol_core_open, sol_core_close, sol_core_detach,
	sol_core_files_info, sol_find_memory_regions,
	sol_make_note_section, ignore): Delete.
	(init_sol_thread_ops): Make it a thread_stratum target.  Remove
	unneeded callback settings.
	(init_sol_core_ops): Delete.
	(_initialize_sol_thread): No longer call init_sol_core_ops, set
	procfs_suppress_run, or hack with core_ops.

	* target.h (struct target_ops): Add a target_ops * parameter to
	to_resume, to_fetch_registers, to_store_registers, to_thread_alive
	and to_find_new_threads.
	(target_fetch_registers, target_store_registers)
	(target_thread_alive, target_find_new_threads): Redeclare as
	function.

	* target.c (update_current_target): Do not inherit or de_fault
	to_resume, to_fetch_registers, to_store_registers,
	to_thread_alive, to_find_new_threads.
	(target_resume): Adjust.
	(target_thread_alive, target_find_new_threads): New.
	(debug_to_resume, debug_to_fetch_registers): Delete.
	(target_fetch_registers): New.
	(debug_to_store_registers): Delete.
	(target_store_registers): New.
	(debug_to_thread_alive, debug_to_find_new_threads): Delete.
	(setup_target_debug): Adjust.

	* gdbcore.h (core_ops): Delete declaration.

	* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
	inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
	i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
	hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
	nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
	alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
	bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
	hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
	ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
	m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
	mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
	ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
	shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
	vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.

	* gdbarch.sh (core_pid_to_str): New gdbarch callback.
	* gdbarch.h, gdbarch.c: Regenerate.

	* sol2-tdep.c: Include "inferior.h".
	(sol2_core_pid_to_str): New.
	* sol2-tdep.h (sol2_core_pid_to_str): Declare.

	* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
	* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
	* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
	* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.

2009-02-22  Doug Evans  <dje@google.com>

	* exec.c (exec_file_attach): Fix comment.

2009-02-22  Pedro Alves  <pedro@codesourcery.com>

	Silence a few -Wmissing-prototypes warnings.

	PR build/9877:
	* alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
	it static.
	* alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
	* amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
	* amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
	(_initialize_amd64nbsd_tdep): ... this.
	* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
	(_initialize_arm_linux_tdep): Declare.
	* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
	* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
	* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
	* avr-tdep.c (avr_return_value): Make it static.
	(avr_frame_unwind_cache): Ditto.
	* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
	(bsd_uthread_solib_loaded): Ditto.
	(bsd_uthread_solib_unloaded): Ditto.
	(bsd_uthread_target): Ditto.
	(_initialize_bsd_uthread): Declare.
	* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
	(cris_frame_unwind_cache): Ditto.
	* frv-tdep.c (frv_return_value): Ditto.
	* h8300-tdep.c (h8300_use_struct_convention): Ditto.
	(h8300h_use_struct_convention): Ditto.
	* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
	Ditto.
	* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
	declarations.
	* hppabsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_find_global_pointer): Make it static.
	* hppabsd-tdep.h: New.
	* hppanbsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Remove declaration.
	(_initialize_hppabsd_tdep): Remove declaration.
	(_initialize_hppanbsd_tdep): Declare.
	* hppaobsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Delete declaration.
	(hppaobsd_init_abi): Make it static.
	* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
	* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
	* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
	* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
	* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
	* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
	(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
	(_initialize_m32c_tdep): Declare.
	* m32r-rom.c (_initialize_m32r_rom): Declare.
	* m32r-tdep.c (m32r_skip_prologue): Make it static.
	(m32r_return_value): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
	(m68hc11_return_value): Ditto.
	* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
	* m88k-tdep.c (m88k_frame_cache): Make it static.
	* mep-tdep.c (mep_gdb_print_insn): Ditto.
	(mep_return_value): Ditto.
	(_initialize_mep_tdep): Declare.
	* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
	* mips-linux-tdep.c (supply_64bit_reg): Make it static.
	(mips_linux_syscall_next_pc): Ditto.
	(_initialize_mips_linux_tdep): Declare.
	* mips-tdep.c (mips_single_step_through_delay): Make it static.
	* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
	* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
	* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
	* mt-tdep.c (_initialize_mt_tdep): Declare.
	* nbsd-tdep.c: Include nbsd-tdep.h.
	* nto-tdep.c (find_load_phdr): Make it static.
	(_initialize_nto_tdep): Declare.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
	static.
	(_initialize_ppc_linux_tdep): Declare.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
	(m32r_insert_watchpoint, m32r_remove_watchpoint)
	(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
	static.
	* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
	* rs6000-nat.c: Include xcoffread.h.
	(find_toc_address): Don't extern declare get_toc_offset.  Adjust
	to call xcoff_get_to_offset.
	* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
	(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
	(rs6000_skip_trampoline_code): Make static.
	* s390-tdep.c (s390_regset_from_core_section): Ditto.
	* sh-tdep.c (sh_register_reggroup_p): Ditto.
	* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
	(_initialize_shnbsd_tdep): Declare.
	* solib-frv.c (displacement_from_map): Make static.
	(_initialize_frv_solib): Declare.
	* solib-irix.c (fetch_lm_info): Make static.
	(_initialize_irix_solib): Declare.
	* solib-som.c: Include solib-som.h.
	(som_solib_select): Line break.
	* sparc-tdep.c (sparc_regset_from_core_section): Make static.
	* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
	(_initialize_sparcnbsd_tdep): ... this.
	* spu-tdep.c (spu_software_single_step): Make it static.
	(_initialize_spu_tdep): Declare.
	* vax-tdep.c (vax_frame_cache): Make it static.
	* xcoffread.c: Include xcoffread.h.
	(get_toc_offset): Rename to ...
	(xcoff_get_toc_offset): ... this.
	(_initialize_xcoffread): Declare.
	* xcoffread.h: New.
	* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
	* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
	static.
	(_initialize_xtensa_tdep): Declare.

2008-02-21  Pedro Alves  <pedro@codesorcery.com>

	Silence a few -Wmissing-prototypes warnings.

	PR build/9877:
	* amd64-nat.c: Include "amd64-nat.h".
	* fork-child.c (_initialize_fork_child): Ditto.
	* gcore.c (_initialize_gcore): Ditto.
	* inf-ptrace.c: Include "inf-ptrace.h".
	(inf_ptrace_store_registers): Make it static.
	* linux-nat.c (linux_nat_terminal_ours): Make it static.
	(_initialize_linux_nat): Declare before definition.
	* linux-tdep.c: Include "linux-tdep.h".
	* linux-thread-db.c (_initialize_thread_db): Declare before
	definition.
	* proc-service.c (_initialize_proc_service): Ditto.
	* remote.c (remote_send_printf): Make it static.
	* solib.c: Include "solib.h".
	* symfile-mem.c (_initialize_symfile_mem): Declare before
	definition.
	* ada-lang.c (ada_la_decode, ada_match_name)
	(ada_suppress_symbol_printing, ada_is_array_type)
	(ada_value_ptr_subscript, ada_array_length)
	(ada_to_static_fixed_value): Make them static.
	(_initialize_ada_language): Declare before definition.
	* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
	(ada_task_list_changed, ada_new_objfile_observer): Make them
	static.
	(_initialize_tasks): Declare before definition.
	* addrmap.c (_initialize_addrmap): Declare before definition.
	* auxv.c (default_auxv_parse): Make it static.
	* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
	them static.
	* breakpoint.c (remove_sal): Add line break.
	(expand_line_sal_maybe): Make it static.
	* cp-name-parser.y: Include "cp-support.h".
	* cp-valprint.c (cp_find_class_member): Make it static.
	* eval.c (value_f90_subarray): Ditto.
	* exceptions.c (print_any_exception): Ditto.
	* findcmd.c (_initialize_mem_search): Declare before definition.
	* frame.c (frame_observer_target_changed): Make it static.
	* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
	* inf-child.c: Include "inf-child.h".
	* inferior.h (valid_inferior_id): Rename to ...
	(valid_gdb_inferior_id): ... this.
	* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
	Make them static.
	* jv-lang.c (java_language_arch_info): Make it static.
	* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
	* osdata.c (info_osdata_command): Make it static.
	* regcache.c (regcache_observer_target_changed): Make it static.
	* reverse.c (_initialize_reverse): Declare before definition.
	* stabsread.c (cleanup_undefined_types_noname)
	(cleanup_undefined_types_1): Make them static.
	* symfile.c (place_section): Make it static.
	* symtab.c (find_pc_sect_psymtab_closer): Make it static.
	* target-descriptions.c (_initialize_target_descriptions): Declare
	before definition.
	* target.c (default_get_ada_task_ptid, find_default_can_async_p)
	(find_default_is_async_p, find_default_supports_non_stop): Make
	them static.
	(target_supports_non_stop): Add prototype.
	(dummy_pid_to_str): Make it static.
	* utils.c (_initialize_utils): Declare before definition.
	* ada-exp.y (_initialize_ada_exp): Declare before definition.
	* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
	* target.h (struct target_ops): Add a prototype to the
	to_can_execute_reverse callback.
	* macroscope.c (_initialize_macroscope): Declare before definition.
	* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
	* python/python.c (_initialize_python): Declare before definition.
	* tui/tui-command.c: Include "tui/tui-command.h".
	* tui/tui-data.c (init_content_element, init_win_info): Make them
	static.
	* tui/tui-disasm.c: Include "tui/tui-disasm.h".
	* tui/tui-interp.c (_initialize_tui_interp): Declare before
	definition.
	* tui/tui-layout.c: Include "tui/tui-layout.h".
	(_initialize_tui_layout): Declare before definition.
	* tui/tui-regs.c: Include "tui/tui-regs.h".
	(tui_display_reg_element_at_line): Make it static.
	(_initialize_tui_regs): Declare before definition.
	* tui/tui-stack.c (_initialize_tui_stack): Declare before
	definition.
	* tui/tui-win.c: Include "tui/tui-win.h".
	(_initialize_tui_win): Declare before definition.
	(tui_sigwinch_handler): Make it static.  Wrap in ifdef SIGWINCH.
	* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
	(tui_get_cmd_list): Add a prototype.
	* tui/tui-windata.c: Include tui-windata.h.
	* tui/tui-wingeneral.c (box_win): Make it static.
	* cli/cli-logging.c (show_logging_command): Make it static.
	(_initialize_cli_logging): Declare before definition.
	* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
	definition.

2009-02-20  Pierre Muller  <muller@ics.u-strasbg.fr>

	Extend use of i386_use_watchpoints to all i386 native files
	using hardware watchpoints.
	* go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
	* i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
	* windows-nat.c (init_windows_ops): Ditto.
	* config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
	* config/i386/nm-cygwin64.h: Ditto.
	* config/i386/nm-fbsd.h: Ditto.
	* config/i386/nm-go32.h: Ditto.

2009-02-19  Joel Brobecker  <brobecker@adacore.com>

	* ada-typeprint.c (ada_typedef_print): Remove.  Unused.

2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>

	* mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
	(mi_interpreter_init): Register the above.
	* solib.c (clear_solib): Notify solib unload.
	* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
	disable breakpoints on a.out targets.

2009-02-17  Vladimir Prus  <vladimir@codesourcery.com>

	* observer.c (observer_test_first_notification_function)
	(observer_test_second_notification_function)
	(observer_test_third_notification_function): Adjust prototype.

2009-02-17  Pedro Alves  <pedro@codesourcery.com>

	* Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
	(ALL_TARGET_OBS): Add dicos-tdep.o.
	(ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
	* configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
	gdb_target_obs.
	(x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
	gdb_target_obs.
	* dicos-tdep.h, dicos-tdep.c: New.
	* amd64-dicos-tdep.c: New.
	* i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
	inferior.h.  Include dicos-tdep.h.
	(i386_dicos_init_abi): Call dicos_init_abi.
	(i386_dicos_bfd_has_symbol_p): Delete.
	(i386_dicos_osabi_sniffer): Use dicos_load_module_p.

	* NEWS: Mention x86-64 DICOS target support.

2009-02-16  Doug Evans  <dje@google.com>

	* amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
	All callers updated.
	(amd64_get_insn_details): Handle more 3-byte opcode insns.
	(amd64_breakpoint_p): Delete.
	(amd64_displaced_step_fixup): When fixing up after stepping an int3,
	don't back up pc to the start of the int3.
	* i386-tdep.c: #include opcode/i386.h.
	(i386_skip_prefixes): New function.
	(i386_absolute_jmp_p): Constify argument.
	(i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
	(i386_breakpoint_p): Delete.
	(i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
	When fixing up after stepping an int3, don't back up pc to the start
	of the int3.

2009-02-16  Pedro Alves  <pedro@codesourcery.com>

	* corelow.c (core_close): Don't hardcode the core's pid.
	(core_open): Find core threads before calling
	post_create_inferior.
	(add_to_thread_list, get_core_register_section): Take into account
	systems where the regset section names encode the pid of the
	inferior.

	* gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
	* gdbarch.h, gdbarch.c: Regenerate.

	* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
	* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
	* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
	* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.

2009-02-14  Vladimir Prus  <vladimir@codesourcery.com>

	Include frame information for *stopped due to CLI commands.

	* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
	* infcmd.c (finish_command_continuation): Pass '1' for
	'print_frame' parameter to the observer.
	* infrun.c (normal_stop): Don't print mi-specific information
	here. Pass 'stop_print_frame' to the 'print_frame' parameter
	of the observer.
	* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
	If we need to print frame, and current uiout is not the MI one,
	print frame again.

2009-02-13  Pierre Muller  <muller@ics.u-strasbg.fr>

	* xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
	Replace BSZ macro uses by XTENSA_ISA_BSZ macro.

2009-02-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR fortran/9806
	* dwarf2read.c (process_die <DW_TAG_module>, read_module)
	(scan_partial_symbols <DW_TAG_module>, add_partial_module): New.

2009-02-11  Pierre Muller  <muller@ics.u-strasbg.fr>

	* dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
	for DW_ATE_signed_char and DW_ATE_unsigned_char
	for pascal language.

2009-02-11  Jim Meyering  <meyering@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Avoid NULL dereference.
	* stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
	New variable func_type.

2009-02-11  Pedro Alves  <pedro@codesourcery.com>

	* gdbarch.c: Regenerate.

2009-02-10  Pierre Muller  <muller@ics.u-strasbg.fr>

	* p-lang.c (is_pascal_string_type): Fix comment.
	Determine exact size of char elements for GPC
	strings.
	(pascal_printstr): Handle char width of 2 or 4.
	* p-valprint.c (pascal_val_print): Handle char
	of width 2 or 4.

2009-02-07  Daniel Jacobowitz  <dan@codesourcery.com>

	* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
	inside the loop.  Only call addrmap_set_empty if the compilation unit
	had DW_AT_high_pc and DW_AT_low_pc.  Update call to
	scan_partial_symbols.
	(scan_partial_symbols): Take NEED_PC argument and pass it along with
	LOWPC and HIGHPC.
	(add_partial_namespace): Take NEED_PC argument and pass it through.
	(add_partial_subprogram): Take NEED_PC argument.  Update the addrmap
	if necessary.

2009-02-07  Pedro Alves  <pedro@codesourcery.com>

	* NEWS: Mention inspecting extra signal information, $_siginfo,
	and the qXfer:siginfo:read and qXfer:siginfo:write packets.

2009-02-07  Pedro Alves  <pedro@codesourcery.com>

	* linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
	isn't defined.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
	(compat_timer_t, compat_clock_t, struct compat_timeval)
	(compat_sigval_t, compat_siginfo_t): New types.
	(cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
	(cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
	(cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
	(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
	(amd64_linux_siginfo_fixup): New.
	* linux-nat.c (linux_nat_siginfo_fixup): New.
	(siginfo_fixup): New.
	(linux_xfer_siginfo): Use siginfo_fixup to convert between the
	siginfo layout expected by ptrace and the siginfo layout of the
	inferior.
	(linux_nat_set_siginfo_fixup): New.
	* linux-nat.h (linux_nat_set_siginfo_fixup): Declare.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
	* infrun.c (siginfo_value_read, siginfo_value_write): New.
	(siginfo_value_funcs): New.
	(siginfo_make_value): New.
	(_initialize_infrun): Create the $_siginfo convenience variable.
	* gdbtypes.h (append_composite_type_field_aligned): Declare.
	* gdbtypes.c (append_composite_type_field): Rename to...
	(append_composite_type_field_aligned): ... this.  Add ALIGNMENT
	argument.  Handle it.
	(append_composite_type_field): Rewrite on top of
	append_composite_type_field_aligned.
	* value.h (internalvar_make_value): New typedef.
	(struct internalvar) <make_value>: New field.
	(create_internalvar_type_lazy): Declare.
	* value.c (create_internalvar): Clear make_value.
	(create_internalvar_type_lazy): New.
	(value_of_internalvar): If make_value is set use it.
	(preserve_values): Skip internal variables that don't have a
	value.
	* gdbarch.sh (get_siginfo_type): New.
	* gdbarch.h, gdbarch.c: Regenerate.

	* linux-tdep.h, linux-tdep.c: New.
	* amd64-linux-tdep.c: Include "linux-tdep.h".
	(amd64_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.
	* i386-linux-tdep.c: Include "linux-tdep.h".
	(i386_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.
	* arm-linux-tdep.c: Include "linux-tdep.h".
	(i386_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.

	* linux-nat.c (linux_xfer_siginfo): New.
	(linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
	* remote.c (PACKET_qXfer_siginfo_read)
	(PACKET_qXfer_siginfo_write): New.
	(feature remote_protocol_features): Add "qXfer:siginfo:read" and
	"qXfer:siginfo:write" features.
	(remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
	(_initialize_remote): Add "set/show remote read-siginfo-object"
	and "set/show remote write-siginfo-object" commands.

	* Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
	(HFILES_NO_SRCDIR): Add linux-tdep.h.
	(ALLDEPFILES): Add linux-tdep.c.

	* configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
	(i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
	gdb_target_obs.

2009-02-06  Jim Blandy  <jimb@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>
	    Vladimir Prus  <vladimir@codesourcery.com>
	    Pedro Alves  <pedro@codesourcery.com>

	* defs.h (enum lval_type): New value: lval_computed.
	* value.h (struct lval_funcs): New type.
	(allocate_computed_value, value_computed_funcs)
	(value_computed_closure): New declarations.
	* value.c (struct value): Add a structure to the location union
	for computed lvalues, containing 'funcs' and 'closure' members.
	(allocate_computed_value, value_computed_funcs)
	(value_computed_closure): New functions.
	(value_free): For computed lvalues, call the closure's
	'free_closure' function before freeing the value itself.
	(value_copy): If we're copying an lval_computed value, call the
	closure's 'copy_closure' function.
	(set_value_component_location): If the original value is a
	computed lvalue, then call the closure's 'copy_closure' function.
	(value_of_internalvar): If an internal variable's value is a
	computed lvalue, make retrieving its value produce an equivalent
	computed lvalue.
	* valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
	their read function.
	(value_assign): Assign to computed lvalues by calling their write
	function.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* linux-nat.c (linux_nat_wait): Adjust.
	(linux_nat_pid_to_str): Adjust.  Remove call to thread_db_init.
	* linux-nat.h (thread_db_init): Delete declaration.
	* linux-thread-db.c (target_beneath): Delete.
	(thread_db_init): Delete.
	(thread_db_detach): Use find_target_beneath.
	(thread_db_wait): Adjust interface.  Use find_target_beneath.
	(thread_db_mourn_inferior): Use find_target_beneath.
	(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
	(thread_db_async_mask): Delete.
	(thread_db_pid_to_str): Adjust interface.  Use
	find_target_beneath.
	(thread_db_get_thread_local_address): Adjust interface.  Use
	find_target_beneath.
	(init_thread_db_ops): Delete references to delete functions.
	* target.c (update_current_target): Don't inherit or default
	to_wait.  Don't inherit to_pid_to_str and
	to_get_thread_local_address.
	(target_translate_tls_address): Look for a pushed target that
	implements to_get_thread_local_address, and use it instead of
	checking for target_get_thread_local_address_p.
	(target_wait, target_pid_to_str): Reimplement as functions.
	(dummy_pid_to_str): New.
	(init_dummy_target): Register it.
	(debug_to_wait): Delete.
	* target.h (struct target_ops): Make to_wait, to_pid_to_str and
	to_get_thread_local_address accept a pointer to struct target_ops.
	(target_wait): Delete macro, and declare as function.
	(target_pid_to_str): Likewise.
	(target_get_thread_local_address)
	(target_get_thread_local_address_p): Delete.
	(noprocess): Add NORETURN and ATTR_NORETURN tags.
	* inf-ptrace.c (inf_ptrace_wait): Adjust.
	(inf_ptrace_pid_to_str): New.
	(inf_ptrace_target): Use inf_ptrace_pid_to_str.
	* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
	* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
	* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
	Adjust.
	* corelow.c (core_pid_to_str): Adjust.
	* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
	* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
	* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
	* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
	* hpux-thread.c (hpux_thread_wait): Adjust.
	* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
	* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
	* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
	* procfs.c (procfs_pid_to_str): Adjust.
	* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
	* remote-mips.c (mips_wait): Adjust.
	* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
	* remote.c (remote_wait, remote_pid_to_str)
	(remote_get_thread_local_address): Adjust.
	* rs6000-nat.c (rs6000_wait): Adjust.
	* sol-thread.c (procfs_pid_to_str): Adjust declaration.
	(sol_thread_wait, solaris_pid_to_str): Adjust.
	* spu-linux-nat.c (spu_child_wait): Adjust.
	* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.

2009-02-06  Tom Tromey  <tromey@redhat.com>

	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
	(SUBDIR_PYTHON_SRCS): Add python-cmd.c.
	(python-cmd.o): New target.
	* cli/cli-decode.c (set_cmd_completer): Add self parameter to
	completer prototype.
	(add_cmd): Initialize destroyer member of cmd_list_element. Use
	make_symbol_completion_list_fn as completer.
	(delete_cmd): Call destroyer if one is set.
	* cli/cli-decode.h (cmd_list_element): Add cmd parameter to
	completer member.  Add destroyer member.
	(set_cmd_completer): Add self parameter to
	completer prototype.
	* command.h (set_cmd_completer): Add cmd parameter to
	completer prototype.
	* completer.c (noop_completer, filename_completer,
	location_completer, expression_completer, command_completer): Adapt
	to new completer prototype.
	(complete_line_internal): Pass new parameter to completer function.
	* completer.h (noop_completer, filename_completer,
	location_completer, expression_completer, command_completer): Adapt
	prototypes to new completer prototype.
	* interps.c (interpreter_completer): Adapt to new completer
	prototype.
	* python/python-cmd.c: New file.
	* python/python-internal.h (gdbpy_initialize_commands): Add
	prototype.
	(gdbpy_doc_cst): Add forward declaration.
	* python/python.c (gdbpy_doc_cst): Declare.
	(_initialize_python): Call gdbpy_initialize_commands.  Initialize
	gdbpy_doc_cst.
	* symtab.c (make_symbol_completion_list_fn): New function.
	* symtab.h (make_symbol_completion_list_fn): Add prototype.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* target.c (target_get_osdata): Check for equal or higher than
	process_stratum, not dummy_stratum.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (extended_remote_can_run): Delete.
	(init_remote_ops): Don't register it.
	* target.c (target_get_osdata): Don't check for target_can_run.
	Instead any target that has already been pushed, otherwise
	fallback to the default run target.

2009-02-06  Pedro Alves  <pedro@codesourcery.com>

	* target.c (target_create_inferior, target_detach)
	(target_mourn_inferior, target_attach, target_close): Do target
	debug output.
	(debug_to_attach, debug_to_detach, debug_to_create_inferior)
	(debug_to_mourn_inferior, debug_to_close): Delete.
	(setup_target_debug): Adjust.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

	* target.h (target_stopped_data_address_p): Delete declaration,
	and don't define as macro.
	* target.c (target_stopped_data_address_p): Delete.

2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>
	    Tom Tromey  <tromey@redhat.com>

	* python/python-utils.c (target_string_to_unicode): New function.
	* python/python-internal.h (target_string_to_unicode): New prototype.
	* python/python-value.c (valpy_string): New function.
	(value_object_methods): Add `string' entry.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

	* target.h (target_tid_to_str): Delete.
	* thread.c (print_thread_info, thread_apply_all_command)
	(thread_apply_command, thread_command, do_captured_thread_select):
	Use target_pid_to_str instead of target_tid_to_str.
	* linux-fork.c (delete_fork_command): Likewise.

2009-02-05  Pedro Alves  <pedro@codesourcery.com>

	* frame.c (has_stack_frames): Make public.
	(get_prev_frame): Don't allow a NULL this_frame anymore.
	* frame.h (has_stack_frames): Declare.
	* varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
	to get_prev_frame, instead start at get_current_frame.
	(varobj_create): Check has_stack_frames before getting any frame;
	eliminate one usage of deprecated_safe_get_selected_frame.

2009-02-05  Tom Tromey  <tromey@redhat.com>
	    Thiago Jung Bauermann  <bauerman@br.ibm.com>

	* python/python.c (GdbMethods): Move to bottom of file.
	(get_parameter, execute_gdb_command, gdbpy_write,
	gdbpy_flush): Remove forward declarations.
	(eval_python_from_control_command): Fix error checking of function
	PyRun_SimpleString.  Fix error string.
	(python_command): Likewise.
	(execute_gdb_command): Added from_tty argument.

2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>

	* language.h (language_dfn): Add la_get_string member.
	(LA_GET_STRING): New macro.
	(default_get_string): New prototype.
	* language.c (default_get_string): New function.
	(unknown_language_defn, auto_language_defn, local_language_defn): Use
	default_get_string for la_get_string.
	* c-lang.c (c_get_string): New function.
	(c_language_defn, cplus_language_defn, asm_language_defn): Use
	c_get_string for la_get_string.
	(minimal_language_defn): Likewise
	* ada-lang.c (ada_language_defn): Likewise.
	* f-lang.c (f_language_defn): Use default_get_string for
	la_get_string.
	* jv-lang.c (java_language_defn): Likewise.
	* m2-lang.c (m2_language_defn): Likewise.
	* objc-lang.c (objc_language_defn): Likewise.
	* p-lang.c (p_language_defn): Likewise.
	* scm-lang.c (scm_language_defn): Likewise.
	* typeprint.c (type_to_string): New function.
	* value.h (type_to_string): New prototype.
	* valprint.c (val_print_string): Factor out code for reading string
	from the inferior into its own function.  Put 2 spaces after period
	in comments.
	(read_string): New function.
	* valprint.h (read_string): New prototype.

2009-01-07  Pierre Muller  <muller@ics.u-strasbg.fr>
	    Tom Tromey  <tromey@redhat.com>

	PR breakpoints/8079:
	* breakpoint.c (print_one_breakpoint): Use exp_string field
	to display expression of watchpoints.
	(mention): Likewise.
	(watch_command_1): Remove trailing whitespace from expression.
	* printcmd.c (struct display) <exp_string>: New field.
	(display_command): Set exp_string.
	(free_display): Free exp_string.
	(clear_displays): Use free_display.
	(do_one_display): Print exp_string.
	(display_info): Likewise.

2009-02-04  Tom Tromey  <tromey@redhat.com>
	    Thiago Jung Bauermann  <bauerman@br.ibm.com>
	    Phil Muldoon  <pmuldoon@redhat.com>

	* python/python-internal.h (gdbpy_get_value_from_history): Rename
	prototype to gdbpy_history.
	(gdbpy_is_string): Declare.
	(python_string_to_host_string): Declare.
	* python/python-utils.c (gdbpy_is_string): New function.
	(unicode_to_encoded_string): New function.
	(unicode_to_target_string): Use it.
	(python_string_to_host_string): New function.
	* python/python-value.c (valpy_address): New function.
	(convert_value_from_python): Use gdbpy_is_string.  Change to throw
	Python exception instead of a GDB exception on error.  Properly check
	Python booleans.
	(valpy_getitem): Convert field name to host string.  Handle array
	accesses.  Adapt to new behaviour of convert_value_from_python.
	(valpy_new): Adapt to new behaviour of convert_value_from_python.
	(enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
	VALPY_BITXOR, VALPY_BITOR>: New constants.
	(valpy_binop): Update.  Adapt to new behaviour of
	convert_value_from_python.
	(valpy_invert): New function.
	(valpy_lsh): Likewise.
	(valpy_rsh): Likewise.
	(valpy_and): Likewise.
	(valpy_or): Likewise.
	(valpy_xor): Likewise.
	(valpy_richcompare): Call convert_value_from_python instead of doing
	conversions itself.
	(is_intlike, valpy_int, valpy_long, valpy_float): New functions.
	(gdbpy_get_value_from_history): Rename
	function to gdbpy_history.
	(gdbpy_initialize_values): Don't set tp_new.
	(value_object_type): Add valpy_new.
	(value_object_methods): Add `address' entry.
	(value_object_as_number): Update for new methods.
	* python/python.c (GdbMethods): Rename entry from
	`get_value_from_history' to `history'.

2009-02-04  Jerome Guitton  <guitton@adacore.com>

	* ada-lang.c (ada_template_to_fixed_record_type_1): Check size
	of type to guard against a crash.

2009-02-04  Jerome Guitton  <guitton@adacore.com>

	* value.c (value_from_contents_and_address): Always return
	a lval_memory value, even if address is null.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

	* i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
	(amd64_darwin_sigcontext_addr): Ditto.
	(darwin_dwarf_signal_frame_p): Ditto.
	(i386_darwin_init_abi): Handle signal frames, use the const for
	sc_num_regs.
	(x86_darwin_init_abi_64): Ditto.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

	* i386-tdep.c (i386_sigtramp_p): Make it public.
	* i386-tdep.h (i386_sigtramp_p): Declare.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

	* machoread.c (macho_symfile_read): Read minsymtab also from
	shared libraries.
	(macho_symfile_read): Try to read dwarf2 frame info from main
	object file, but not from OSO files.
	(macho_symfile_offsets): Update section names for latest BFD
	changes.
	* i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
	(x86_darwin_init_abi_64): Ditto.
	* solib-darwin.c: New file.
	* solib-darwin.h: New file.
	* configure.tgt: Add solib.o solib-darwin.o for Darwin.

2009-02-04  Tristan Gingold  <gingold@adacore.com>

	* solist.h (struct target_so_ops): Comment fallback behavior for
	operation same.

2009-02-03  Tom Tromey  <tromey@redhat.com>

	* completer.c (add_struct_fields): Check type_name against NULL
	before use.

2009-02-03  Joel Brobecker  <brobecker@adacore.com>

	* MAINTAINERS: Update Elena's email address.

2009-02-02  Joel Brobecker  <brobecker@adacore.com>

	* breakpoint (update_watchpoint): Minor comment adjustment.

2009-02-02  Tom Tromey  <tromey@redhat.com>

	PR gdb/9594:
	* completer.c (count_struct_fields): Count method names.
	(add_struct_fields): Add matching method names.

2009-02-02  Doug Evans  <dje@google.com>

	* configure.ac (gdbkt): Check both no_tcl/no_tk first, before
	doing any further tcl/tk configury.  Don't configure gdbtk if
	tcl or tk check fails.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2009-02-02  Tom Tromey  <tromey@redhat.com>

	PR exp/9059:
	* valops.c (find_overload_match): Follow typedefs before taking
	address of object argument.

2009-02-01  Doug Evans  <dje@google.com>

	* target.h (target_waitstatus_to_string): Declare.
	* target.c (target_waitstatus_to_string): New function.  Copied from
	debug_to_wait.  Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
	TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
	TARGET_WAITKIND_NO_HISTORY.
	(debug_to_wait): Call it.
	* infrun.c (wait_for_inferior): If debug_infrun, print result of
	target_wait.
	(fetch_inferior_event): Ditto.

2009-01-30  Tom Tromey  <tromey@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.

2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>

	PR 8145.
	* thread.c (do_captured_list_thread_ids): Report the current
	thread id.

2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>

	* breakpoint.c (create_breakpoint, create_breakpoints)
	(break_command_really, set_breakpoint): New parameter enabled.
	(create_breakpoint, break_command_really): Make breakpoint
	disabled if so requested.
	* breakpoint.h (set_breakpoint): New parameter enabled.
	* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.

2009-01-28  Doug Evans  <dje@google.com>

	* amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
	(amd64_displaced_step_fixup): Declare.
	* amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
	(amd64_arch_regmap): Move out of amd64_analyze_stack_align
	and make static global.
	(amd64_arch_regmap_len): New static global.
	(amd64_arch_reg_to_regnum): New function.
	(struct amd64_insn): New struct.
	(struct displaced_step_closure): New struct.
	(onebyte_has_modrm,twobyte_has_modrm): New static globals.
	(rex_prefix_p,skip_prefixes)
	(amd64_insn_length_fprintf,amd64_insn_length_init_dis)
	(amd64_insn_length,amd64_get_unused_input_int_reg)
	(amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
	(amd64_displaced_step_copy_insn)
	(amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
	(amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
	(amd64_displaced_step_fixup): New functions.
	* amd64-linux-tdep.c: #include arch-utils.h.
	(amd64_linux_init_abi): Install displaced stepping support.

2009-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
	    Jerome Guitton  <guitton@adacore.com>

	* configure, config.in: Regenerated.
	* configure.ac: Add --with-system-gdbinit.
	* main.c (get_init_files): New.
	(captured_main): Use get_init_files.  Load system gdbinit before
	$HOME/.gdbinit.
	(print_gdb_help): Print location of init files.

2009-01-28  Pedro Alves  <pedro@codesourcery.com>

	* corefile.c (generic_search): Delete disabled code.
	* gdbcore.h (generic_search): Delete declaration.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

	* linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
	parent to the child.
	* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
	* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.  Use
	remove_breakpoints to remove breakpoints from the parent.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

	PR backtrace/9458, PR backtrace/8864:
	* frame.c (create_new_frame): Update the frame's cached PC before
	finding its unwinder.  Use frame_id_build to build the new frame's
	id.
	* stack.c (parse_frame_specification_1): Correct setting ``addrs''
	array values from the ``args'' array values.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

	* gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
	(create_array_type, create_set_type, init_flags_type)
	(copy_type_recursive): Replace pairs of calls to XALLOC and memset
	with a call to XZALLOC or XCALLOC, and pairs of calls to
	obstack_alloc and memset with a call to OBSTACK_ZALLOC.

2009-01-26  Pedro Alves  <pedro@codesourcery.com>

	Add "maint set|show internal-error|internal-warning quit|corefile
	ask|yes|no" commands.

	PR gdb/7580:
	* utils.c (internal_problem_ask, internal_problem_yes)
	(internal_problem_no, internal_problem_modes): New.
	(struct internal_problem): Remove FIXME.  Make should_quit and
	should_dump_core types to char *.
	(internal_vproblem, internal_error_problem)
	(internal_warning_problem): Adjust.
	(set_internal_problem_cmd, show_internal_problem_cmd): New dummy
	functions.
	(add_internal_problem_command): New.
	(_initialize_utils): New.

2009-01-25  Pedro Alves  <pedro@codesourcery.com>

	* infcmd.c (program_info): Use paddress instead of casting stop_pc
	to unsigned long.

2009-01-24  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (normal_stop): Don't call
	deprecated_update_frame_pc_hack.
	* frame.c (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete, and ...
	(create_new_frame): ... inline here.
	* frame.h (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete declarations.

2009-01-23  Pedro Alves  <pedro@codesourcery.com>

	* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
	* cli/cli-setshow.c (do_setshow_command): Handle it.
	* command.h (enum var_types): Add var_zuinteger.
	(add_setshow_zuinteger_cmd): Declare.

	* valprint.c (_initialize_valprint): Change the set input-radix
	and set output-radix commands to zuinteger type.

2009-01-23  Pedro Alves  <pedro@codesourcery.com>

	PR gdb/9664:
	* infrun.c (normal_stop): Tag threads as stopped, and run the
	hook-stop before printing the stack frame.

2009-01-22  Pedro Alves  <pedro@codesourcery.com>

	PR c++/9631:
	* gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
	vbasetype.

2009-01-20  Kazu Hirata  <kazu@codesourcery.com>

	* gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
	unsigned long.

2009-01-20  Daniel Jacobowitz  <dan@codesourcery.com>

	PR gdb/9346
	* infcmd.c (signal_command): Do not specify a resume PC.

2009-01-19  Doug Evans  <dje@google.com>

	* dummy-frame.c (dummy_frame): Replace regcache member with
	caller_state.
	(dummy_frame_push): Replace caller_regcache arg with caller_state.
	All callers updated.
	(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
	(dummy_frame_pop): Rewrite.  Verify requested frame is in the
	dummy frame stack.  Restore program state.
	(cleanup_dummy_frames): Rewrite.
	(dummy_frame_sniffer): Update.  Make static.
	* dummy-frame.h (regcache,frame_info): Delete forward decls.
	(inferior_thread_state): New forward decl.
	(dummy_frame_push): Update prototype.
	* frame.c (frame_pop): dummy_frame_pop now does all the work for
	DUMMY_FRAMEs.
	* infcall.c (breakpoint_auto_delete_contents): Delete.
	(get_function_name,run_inferior_call): New fns.
	(call_function_by_hand): Simplify by moving some code to
	get_function_name, run_inferior_call.  Inferior function call wrapped
	in TRY_CATCH so there's less need for cleanups and all exits from
	proceed are handled similarily.  Detect program exit.
	Detect program stopping in a different thread.
	Make error messages more consistent.
	* inferior.h (inferior_thread_state): Declare (opaque type).
	(save_inferior_thread_state,restore_inferior_thread_state,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state, get_inferior_thread_state_regcache):
	Declare.
	(save_inferior_status): Update prototype.
	* infrun.c: (normal_stop): When stopped for the completion of an
	inferior function call, verify the expected stack frame kind.
	(inferior_thread_state): New struct.
	(save_inferior_thread_state,restore_inferior_thread_state,
	do_restore_inferior_thread_state_cleanup,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state,
	get_inferior_thread_state_regcache): New functions.
	(inferior_status): Move stop_signal, stop_pc, registers to
	inferior_thread_state.  Remove restore_stack_info.
	(save_inferior_status): Remove arg restore_stack_info.
	All callers updated.  Remove saving of state now saved by
	save_inferior_thread_state.
	(restore_inferior_status): Remove restoration of state now done by
	restore_inferior_thread_state.
	(discard_inferior_status): Remove freeing of registers, now done by
	discard_inferior_thread_state.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

	* tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
	at a time, times NUM_TO_SCROLL.
	* tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
	fetch the selected frame if there is no stack.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

	PR gdb/9747:
	* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
	Declare.
	* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
	* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
	is thrown while handling an event, finish the thread state.
	(normal_stop): Use finish_thread_state cleanup.
	* infcmd.c (run_command_1): If an error is thrown while starting
	the inferior, finish the thread state.

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

	* tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
	skip breakpoints without a location (pending breakpoints).

2009-01-18  Pedro Alves  <pedro@codesourcery.com>

	PR build/9186:
	* hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.

2009-01-18  Nick Roberts  <nickrob@snap.net.nz>

	* thread.c (thread_command): Move call to annotate_thread_changed
	to...
	(do_captured_thread_select): ... here, to avoid printing an
	annotation if the thread change generates an exception.

2009-01-16  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Document x86_64/MinGW as a new native configuration.

2009-01-16  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Move the documentation of "info os processes" to
	the appropriate section (documenting the new commands).

2009-01-15  Doug Evans  <dje@google.com>

	* target.h (target_signal_to_string): Make return type const char *.
	(target_signal_to_name): Ditto.
	(target_signal_from_name): Make arg const char *.
	* infrun.c (sig_print_info): Update.
	* signals/signals.c (signals): Make array and struct members const.
	(target_signal_to_string): Make return type const char *.
	(target_signal_to_name): Ditto.
	(target_signal_from_name): Make arg const char *.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>
	    Tristan Gingold  <gingold@adacore.com>

	* solist.h (struct target_so_ops): New member bfd_open.
	(solib_find): Add prototype.
	(solib_bfd_fopen): Add prototype.
	* solib.c (solib_find, solib_bfd_fopen): New functions, extracted
	from solib_bfd_open.
	(solib_bfd_open): Use ops->bfd_open override if present.  Call
	solib_find and solib_bfd_open otherwise.

	* objfiles.h (OBJF_KEEPBFD): New define.
	* objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
	objfile flag is set.
	* solib.c (symbol_add_stub): Do not allocate second BFD for
	shared library; use OBJF_KEEPBFD flag on solib objfile.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>

	* frame.c (get_frame_arch): Abort if called with NULL this_frame.

2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>

	* value.h (address_of_variable): Add prototype.
	(locate_var_value): Remove prototype.

	* findvar.c (read_var_value): Do not attempt to default frame
	to selected frame.
	(locate_var_value): Remove function.
	* valops.c (value_of_variable): Retrieve selected frame for
	symbols that require a frame when called with NULL block.
	* valops.c (address_of_variable): New function.

	* eval.c (evaluate_subexp_for_address): Call address_of_variable
	instead of calling locate_var_value.
	(evaluate_subexp_with_coercion): Likewise.

2009-01-14  Daniel Jacobowitz  <dan@codesourcery.com>

	* NEWS: Document "define" for prefixed commands.
	* cli/cli-cmds.c (show_user): Update calls to show_user_1.  Call
	show_user_1 for prefix commands.
	* cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
	* cli/cli-script.c (validate_comname): Rewrite to handle prefix
	commands.  Return the containing command list.
	(define_command, document_command): Update to handle prefix commands.
	(show_user_1): Add prefix and name arguments.  Handle prefix
	commands.
	* cli/cli-script.h (show_user_1): Update prototype.

2009-01-14  Kai Tietz  <kai.tietz@onevision.com>

	* mingw-ser.c (console_select_thread): Add return to make
	compiler happy.
	(pipe_select_thread): Likewise.
	(file_select_thread): Likewise.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

	* mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
	previous change.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

	* remote.c (extended_remote_mourn_1): Invalidate our notion of
	current general thread.

2009-01-14  Pedro Alves  <pedro@codesourcery.com>

	* mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
	without a live selected thread.

2009-01-14  Joel Brobecker  <brobecker@adacore.com>

	Update the copyright notice of some of the files I missed
	in the previous copyright update.

2009-01-14  Joel Brobecker  <brobecker@adacore.com>

	* windows-nat.c (handle_unload_dll): Use %p to print the DLL
	base address instead of casting it to DWORD.

2009-01-13  Ulrich Weigand  <uweigand@de.ibm.com>

	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
	for NULL frame pointers.

2009-01-13  Mark Kettenis  <kettenis@gnu.org>

	* utils.c (host_address_to_string): Reimplement in a way that
	avoids the cast of the address to long.

2009-01-13  Joel Brobecker  <brobecker@adacore.com>

	* mdebugread.c (parse_symbol): Save the symbol private data
	using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
	(psymtab_to_symtab_1): Likewise.
	(parse_procedure): Declare variable "e" only in the scope
	where it is used. Extract the symbol private data using
	SYMBOL_VALUE_BYTES.

2009-01-13  Jim Blandy  <jimb@codesourcery.com>

	Abstract out common code for copying value locations.

	* value.h (set_value_component_location): New declaration.
	* value.c (set_value_component_location): New function.
	(value_primitive_field): Use it.
	* valarith.c (value_subscript, value_subscripted_rvalue): Same.
	* valops.c (search_struct_field, value_slice): Same.
	* ada-lang.c (coerce_unspec_val_to_type)
	(ada_value_primitive_packed_val): Same.

2009-01-13  Joel Brobecker  <brobecker@adacore.com>

	* MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.

2009-01-12  Christopher Faylor  <me+cygwin@cgf.cx>

	* amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
	throughout.
	* i386-cygwin-tdep.c: Ditto.
	* i386-windows-nat.c: Ditto.
	* windows-nat.h: Ditto.
	* windows-tdep.c: Ditto.
	* windows-tdep.h: Ditto.
	* windows-nat.c: Ditto.
	(cygwin_load_start): Redefine as CORE_ADDR.
	(cygwin_load_end): Ditto.
	(windows_make_so): Coerce result of address arithmetic to uintptr_t
	before coercing to CORE_ADDR to avoid a compiler warning.
	(handle_exception): Define addr as CORE_ADDR and coerce
	ExceptionAddress to uintptr_t before assigining to avoid a compiler
	warning.
	* config/djgpp/fnchange.lst: Add mappings for recently renamed windows
	files.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix linking with --enable-targets=all:
	* Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
	(HFILES_NO_SRCDIR): Add windows-tdep.h.
	(ALLDEPFILES): Add windows-tdep.c.

2009-01-11  Chris Faylor  <me.gdb@cgf.cx>

	* win32-nat.h: Delete.
	* windows-nat.h: Rename from win32-nat.h.
	* win32-nat.c: Delete.
	* windows-nat.c: Rename from win32-nat.c.
	* win32-termcap.c: Delete.
	* windows-termcap.c: Rename from win32-termcap.c.
	* amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
	* configure.ac: Handle rename from win32-termcap.c ->
	windows-termcap.c.
	* configure: Regenerate.
	* gdb_curses.h: Change comment to reflect rename from win32-termcap.c
	-> windows-termcap.c.
	* i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
	windows-tdep.h.
	* i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
	* windows-nat.c: Ditto.  Also reflect rename from from win32-tdep.h ->
	windows-tdep.h.
	(win32_make_so): Handle cygwin compiler warning due to change of
	load_addr from DWORD to LPVOID.
	(handle_load_dll): Use %p in format string to properly print address
	and avoid a compiler warning.
	(DEBUG_EXCEPTION_SIMPLE): Ditto.
	(handle_exception): Ditto.
	* windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
	* config/i386/cygwin.mh: Handle rename from win32-nat.o ->
	windows-nat.o.
	* config/i386/mingw.mh: Ditto.
	* config/i386/mingw64.mh: Ditto.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
	arrayprint_recurse_level to a parameter.  Update all the callers.  New
	comment at autovariables.

2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
	coding style.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

	* target.c (target_xfer_partial): Use host_address_to_string to
	print the address of readbuf and writebuf. Cast the address of
	elements inside the myaddr buffer into intptr_t.
	(deprecated_debug_xfer_memory): Use paddress to print memaddr.
	Cast the address of elements inside the myaddr buffer into
	intptr_t.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

	* amd64-windows-nat.c, amd64-windows-tdep.c: New files.
	* config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
	* configure.host, configure.tgt: Add handling for x86_64/windows.
	* config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
	and amd64-windows-tdep.c.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

	* win32-tdep.h, win32-tdep.c: New files.
	* i386-cygwin-tdep.h: Delete.
	* i386-cygwin-tdep.c: Include win32-tdep.h instead of
	i386-cygwin-tdep.h.
	(win32_xfer_shared_library): Delete.  Moved to win32-tdep.c.
	* win32-nat.c: Likewise.
	* configure.tgt: Add win32-tdep.o to the list of target object
	files for i386-cygwin and i386-mingw targets.

2009-01-11  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.h: New file.
	* win32-nat.c (mappings): Initialize to NULL.
	(win32_set_context_register_offsets): New function.
	* i386-windows-nat.c: New file.
	(mappings): Moved here from win32-nat.c.
	(_initialize_i386_windows_nat): New function.
	* config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
	* config/i386/cygwin.mh (NATDEPFILES): Likewise.

2009-01-09  Andreas Schwab  <schwab@suse.de>

	* Makefile.in (init.c): Set LANG/LC_ALL to C, not c.

2009-01-09  Daniel Jacobowitz  <dan@codesourcery.com>

	* gdbtypes.c (append_composite_type_field): Correct the location of
	appended fields.

2009-01-09  Pedro Alves  <pedro@codesourcery.com>

	* defs.h (deprecated_error_hook): Delete declaration.
	* interps.c (clear_interpreter_hooks): Adjust.
	* remote-sim.c (gdb_os_error): Don't try to call
	deprecated_error_hook.  No need to call exit anymore.
	* top.c (deprecated_error_hook): Delete.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* arch-utils.c (gdbarch_update_p): Use host_address_to_string
	to print the address of the gdbarch pointer.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* gdbarch.sh: Fix all the compilation errors on amd64-windows
	due to casting a pointer to a long when printing a function
	address. Instead, use host_address_to_string to convert our
	address to a string.
	* gdbarch.c: Regenerate.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* event-top.c (async_disconnect, async_stop_sig): use "raise"
	instead of "kill" to raise a signal.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (get_module_name): Change the type of parameter
	"base_address" to LPVOID.  Remove unnecessary cast.
	(struct lm_info): Change type of load_addr to LPVOID.
	(win32_make_so): Change the type of parameter "load_addr"
	to LPVOID.  Remove some unnecessary casts.
	(handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
	(win32_xfer_shared_libraries): Add missing cast.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (has_detach_ability, set_process_privilege):
	Cast the result of GetProcAddress to (void *) to avoid
	a compilation warning.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
	already defined.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (get_image_name, win32_xfer_memory): Fix type
	definition of local variable "done".
	(info_w32_command, handle_exception): Remove unnecessary cast.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
	DebugSetProcessKillOnExit.  Update all uses in this file.
	(kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
	Update all uses in this file.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
	and use it when pushing the target.
	(win32_attach, win32_create_inferior): Update call to
	do_initial_win32_stuff.
	(win32_detach, win32_mourn_inferior): Use our ops parameter
	instead of the global win32_ops to unpush the target.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* ser-mingw.c (ser_windows_open): Use proper type when casting
	in call to _open_osfhandle.

2009-01-09  Kai Tietz  <kai.tietz@onevision.com>

	* coff-pe-read.c (read_pe_exported_syms): Fix typo.

2009-01-09  Joel Brobecker  <brobecker@adacore.com>

	* CONTRIBUTE: Minor reformatting.

2009-01-08  Kai Tietz  <kai.tietz@onevision.com>

	* MAINTAINERS: Add myself to Write After Approval.
	* coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
	export directory.

2009-01-08  Nathan Froyd  <froydnj@codesourcery.com>

	* remote-sim.c (gdb_os_error): Mark as a noreturn function.
	Call exit to make it obvious to GCC.

2009-01-08  Tom Tromey  <tromey@redhat.com>

	PR breakpoints/9350:
	* varobj.c (varobj_invalidate): Unconditionally free
	all_rootvarobj.
	* symfile.c (syms_from_objfile): Free local_addr when returning
	normally.
	* exec.c (exec_file_attach): Do cleanups before returning.
	(exec_file_command): Likewise.
	* corefile.c (reopen_exec_file): Do cleanups before returning.
	* breakpoint.c (insert_breakpoint_locations): Do cleanups before
	returning.
	(do_vec_free): New function.
	(update_global_location_list): Make a cleanup for old_locations.
	Do cleanups before returning.  Remove unused variable 'e'.
	(find_condition_and_thread): Free result of parsing the
	expression.
	(print_it_typical): Do cleanups before returning.
	(breakpoint_re_set_one): Always free sals.sals.

2009-01-08  Joel Brobecker  <brobecker@adacore.com>
	    Emi Suzuki  <emi-suzuki@tjsys.co.jp>

	* breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
	watchpoints.

2009-01-07  Doug Evans  <dje@google.com>

	* top.c (gdb_prompt_string): Delete, unused.

2009-01-07  Pedro Alves  <pedro@codesourcery.com>

	Delete ONE_PROCESS_WRITETEXT leftovers.

	* breakpoint.c (insert_bp_location): Delete process_warning
	argument.  Adjust.
	(insert_breakpoint_locations): Adjust.
	(reattach_breakpoints): Adjust.
	* infrun.c (normal_stop): Drop "It might be running in another
	process" notice.

2009-01-07  Stan Shebs  <stan@codesourcery.com>

	* config/pa/linux.mh (XDEPFILES): Remove.

2009-01-07  Doug Evans  <dje@google.com>

	* cli/cli-cmds.c (set_debug): Fix cut-n-paste error.

2009-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
	spacing, a regression from 2008-04-22.

2009-01-07  Joel Brobecker  <brobecker@adacore.com>

	* utils.c (gdb_print_host_address): Adjust implementation to
	reuse host_address_to_string. Move comment explaining the conversion
	from host address to string from here...
	(host_address_to_string): ... to there.

2009-01-07  Emi Suzuki  <emi-suzuki@tjsys.co.jp>

	* MAINTAINERS: Add myself for write after approval privileges.

2009-01-06  Tom Tromey  <tromey@redhat.com>

	* value.c (set_internalvar): Use value_free, not xfree.

2009-01-06  Jim Blandy  <jimb@red-bean.com>

	Check return values of functions declared with warn_unused_result
	attribute in GLIBC 2.8.
	* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
	* inflow.c (check_syscall): New function.
	(new_tty): Use check_syscall to check return values from open and dup.
	* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
	* main.c (captured_main): Call cwd after setting up gdb_stderr;
	check for errors from getcwd.
	* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
	* ui-file.c (stdio_file_write): Ignore return value from fwrite.
	(stdio_file_fputs): Same.
	* utils.c (internal_vproblem): abort if last-ditch error message
	write fails.

	* top.c (gdb_init): Don't set the current directory here; that's
	already been done in captured_main.

2009-01-06  Sandra Loosemore  <sandra@codesourcery.com>

	* ser-tcp.c: Adjust includes.
	(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
	(tcp_auto_retry, tcp_retry_limit): Declare.
	(TIMEOUT): Remove, in favor of tcp_retry_limit.
	(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
	(wait_for_connect): New function.
	(net_open): Use it.  Add auto-retry logic.
	(set_tcp_cmd, show_tcp_cmd): New functions.
	(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
	and "set/show tcp connect-timeout" commands.
	* NEWS: Document new commands.

2009-01-05  Tom Tromey  <tromey@redhat.com>

	* python/python-internal.h (Py_ssize_t): Define as int.

2009-01-05  Jim Blandy  <jimb@red-bean.com>

	* MAINTAINERS: Fix my e-mail address as steering committee member.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

	Updated copyright notices for most files.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Update copyright year.

2009-01-03  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.

2009-01-01  Pedro Alves  <pedro@codesourcery.com>

	PR breakpoints/9681:
	* exceptions.h (enum errors): New error type, MEMORY_ERROR.
	* corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
	* breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
	retrow all other exceptions.

For older changes see ChangeLog-2008.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: