Commit | Line | Data |
---|---|---|
62e859f0 | 1 | #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc. |
33cf356a SG |
2 | |
3 | # This file is part of GDB. | |
4 | ||
5 | # This program is free software; you can redistribute it and/or modify | |
3e5afc2c RP |
6 | # it under the terms of the GNU General Public License as published by |
7 | # the Free Software Foundation; either version 2 of the License, or | |
8 | # (at your option) any later version. | |
9 | # | |
10 | # This program is distributed in the hope that it will be useful, | |
11 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | # GNU General Public License for more details. | |
14 | # | |
15 | # You should have received a copy of the GNU General Public License | |
16 | # along with this program; if not, write to the Free Software | |
33cf356a | 17 | # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
3e5afc2c RP |
18 | |
19 | prefix = /usr/local | |
20 | ||
b68b44fa | 21 | program_transform_name = |
4db3902a RP |
22 | exec_prefix = $(prefix) |
23 | bindir = $(exec_prefix)/bin | |
24 | libdir = $(exec_prefix)/lib | |
6a1f93f6 | 25 | tooldir = $(libdir)/$(target_alias) |
4db3902a | 26 | |
3e5afc2c | 27 | datadir = $(prefix)/lib |
4db3902a | 28 | mandir = $(prefix)/man |
3e5afc2c RP |
29 | man1dir = $(mandir)/man1 |
30 | man2dir = $(mandir)/man2 | |
31 | man3dir = $(mandir)/man3 | |
32 | man4dir = $(mandir)/man4 | |
33 | man5dir = $(mandir)/man5 | |
34 | man6dir = $(mandir)/man6 | |
35 | man7dir = $(mandir)/man7 | |
36 | man8dir = $(mandir)/man8 | |
37 | man9dir = $(mandir)/man9 | |
4db3902a | 38 | infodir = $(prefix)/info |
3e5afc2c RP |
39 | includedir = $(prefix)/include |
40 | docdir = $(datadir)/doc | |
41 | ||
42 | SHELL = /bin/sh | |
43 | ||
44 | INSTALL = install -c | |
45 | INSTALL_PROGRAM = $(INSTALL) | |
46 | INSTALL_DATA = $(INSTALL) | |
47 | ||
48 | AR = ar | |
33cf356a | 49 | AR_FLAGS = qv |
3e5afc2c RP |
50 | RANLIB = ranlib |
51 | ||
33cf356a SG |
52 | # Flags that describe where you can find the termcap library. |
53 | # This can be overridden in the host Makefile fragment file. | |
54 | TERMCAP = -ltermcap | |
55 | ||
56 | # System V: If you compile gdb with a compiler which uses the coff | |
57 | # encapsulation feature (this is a function of the compiler used, NOT | |
58 | # of the m-?.h file selected by config.gdb), you must make sure that | |
59 | # the GNU nm is the one that is used by munch. | |
60 | ||
61 | # If you are compiling with GCC, make sure that either 1) You use the | |
62 | # -traditional flag, or 2) You have the fixed include files where GCC | |
63 | # can reach them. Otherwise the ioctl calls in inflow.c | |
64 | # will be incorrectly compiled. The "fixincludes" script in the gcc | |
65 | # distribution will fix your include files up. | |
66 | #CC=cc | |
67 | #CC=gcc -traditional | |
68 | GCC=gcc | |
69 | ||
70 | # Directory containing source files. Don't clean up the spacing, | |
71 | # this exact string is matched for by the "configure" script. | |
72 | srcdir = . | |
d941d8c3 | 73 | |
33cf356a SG |
74 | # It is also possible that you will need to add -I/usr/include/sys to the |
75 | # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which | |
76 | # is where it should be according to Posix). | |
77 | ||
19d0f3f4 FF |
78 | # If you use bison instead of yacc, it needs to include the "-y" argument. |
79 | #BISON="bison -y" | |
33cf356a SG |
80 | BISON=yacc |
81 | YACC=$(BISON) | |
33cf356a | 82 | |
33cf356a | 83 | # where to find texinfo; GDB dist should include a recent one |
967007ca | 84 | TEXIDIR=${srcdir}/../texinfo |
33cf356a SG |
85 | |
86 | # where to find makeinfo, preferably one designed for texinfo-2 | |
87 | MAKEINFO=makeinfo | |
88 | ||
89 | # Set this up with gcc if you have gnu ld and the loader will print out | |
90 | # line numbers for undefinded refs. | |
91 | #CC-LD=gcc -static | |
92 | CC-LD=${CC} | |
93 | ||
94 | # Where is the "include" directory? Traditionally ../include or ./include | |
95 | INCLUDE_DIR = ${srcdir}/../include | |
96 | INCLUDE_DEP = $$(INCLUDE_DIR) | |
97 | ||
98 | # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc | |
99 | # or ./mmalloc (When we want the binary library built from it, we use | |
100 | # ${MMALLOC_DIR}${subdir}.) | |
101 | # Note that mmalloc can still be used on systems without mmap(). | |
102 | # To use your system malloc, comment out the following defines. | |
103 | MMALLOC_DIR = ${srcdir}/../mmalloc | |
104 | MMALLOC_DEP = $$(MMALLOC_DIR) | |
105 | MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a | |
106 | # To use your system malloc, uncomment MMALLOC_DISABLE. | |
107 | #MMALLOC_DISABLE = -DNO_MMALLOC | |
108 | # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK | |
109 | #MMALLOC_CHECK = -DNO_MMALLOC_CHECK | |
110 | MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE} | |
111 | ||
112 | # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd | |
113 | # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) | |
114 | BFD_DIR = ${srcdir}/../bfd | |
115 | BFD_DEP = $$(BFD_DIR) | |
116 | BFD_LIB = ./../bfd${subdir}/libbfd.a | |
117 | ||
118 | # Where is the source dir for the READLINE library? Traditionally in .. or . | |
119 | # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) | |
120 | READLINE_DIR = ${srcdir}/../readline | |
121 | READLINE_DEP = $$(READLINE_DIR) | |
122 | RL_LIB = ./../readline${subdir}/libreadline.a | |
123 | ||
124 | # All the includes used for CFLAGS and for lint. | |
125 | # -I. for config files. | |
126 | # -I${srcdir} possibly for regex.h also. | |
a679650f | 127 | INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) |
33cf356a SG |
128 | |
129 | # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS | |
130 | # from the config/ directory. | |
131 | GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} | |
132 | #PROFILE_CFLAGS = -pg | |
133 | ||
134 | # CFLAGS is specifically reserved for setting from the command line | |
135 | # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". | |
136 | CFLAGS = -g | |
137 | # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. | |
138 | INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} | |
139 | # None of the things in CFLAGS will do any harm, and on some systems | |
d40309c7 | 140 | # (e.g. SunOS4) it is important to use the MH_CFLAGS. |
33cf356a SG |
141 | LDFLAGS = $(CFLAGS) |
142 | ||
143 | # Where is the "-liberty" library, containing getopt and obstack? | |
144 | LIBIBERTY_DIR = ${srcdir}/../libiberty | |
145 | LIBIBERTY = ./../libiberty${subdir}/libiberty.a | |
146 | ||
1e4f3c20 KR |
147 | # Where is the "-lopcodes" library, with (some of) the opcode tables and |
148 | # disassemblers? | |
149 | OPCODES = ./../opcodes${subdir}/libopcodes.a | |
150 | ||
33cf356a SG |
151 | # The config/mh-* file must define REGEX and REGEX1 on USG machines. |
152 | # If your sysyem is missing alloca(), or, more likely, it's there but | |
153 | # it doesn't work, define ALLOCA & ALLOCA1 too. | |
33cf356a SG |
154 | |
155 | # Libraries and corresponding dependencies for compiling gdb. | |
156 | # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. | |
157 | # TERMCAP comes after readline, since readline depends on it. | |
d40309c7 JG |
158 | CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \ |
159 | ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} | |
160 | CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \ | |
072b552a | 161 | ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} |
33cf356a | 162 | |
d40309c7 JG |
163 | ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} |
164 | ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} | |
33cf356a | 165 | |
0b96ed06 | 166 | VERSION = 4.8.2 |
33cf356a SG |
167 | DIST=gdb |
168 | ||
169 | LINT=/usr/5bin/lint | |
170 | LINTFLAGS= -I${BFD_DIR} | |
171 | ||
e7d3b7d1 RS |
172 | RUNTEST=runtest |
173 | RUNTESTFLAGS= | |
6fcb280e | 174 | |
33cf356a SG |
175 | # Host and target-dependent makefile fragments come in here. |
176 | #### | |
177 | # End of host and target-dependent makefile fragments | |
178 | ||
ef131e13 | 179 | FLAGS_TO_PASS = \ |
2fcc38b8 FF |
180 | "prefix=$(prefix)" \ |
181 | "exec_prefix=$(exec_prefix)" \ | |
ef131e13 JG |
182 | "against=$(against)" \ |
183 | "AR=$(AR)" \ | |
184 | "AR_FLAGS=$(AR_FLAGS)" \ | |
185 | "CC=$(CC)" \ | |
186 | "CFLAGS=$(CFLAGS)" \ | |
aecc5459 ILT |
187 | $(start-sanitize-chill)\ |
188 | "CHILLFLAGS=$(CHILLFLAGS)" \ | |
189 | "CHILL=$(CHILL)" \ | |
190 | "CHILL_LIB=$(CHILL_LIB)" \ | |
191 | $(end-sanitize-chill)\ | |
192 | "CXX=$(CXX)" \ | |
193 | "CXXFLAGS=$(CXXFLAGS)" \ | |
ef131e13 JG |
194 | "RANLIB=$(RANLIB)" \ |
195 | "MAKEINFO=$(MAKEINFO)" \ | |
196 | "INSTALL=$(INSTALL)" \ | |
197 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ | |
198 | "INSTALL_DATA=$(INSTALL_DATA)" \ | |
e7d3b7d1 RS |
199 | "RUNTEST=$(RUNTEST)" \ |
200 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ | |
ef131e13 JG |
201 | "BISON=$(BISON)" |
202 | ||
aecc5459 ILT |
203 | # Flags that we pass when building the testsuite. |
204 | ||
205 | CC_FOR_TARGET = ` \ | |
206 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
207 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ | |
208 | else \ | |
209 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
210 | echo $(CC); \ | |
211 | else \ | |
212 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
213 | fi; \ | |
214 | fi` | |
215 | ||
216 | CXX = gcc | |
217 | ||
218 | CXX_FOR_TARGET = ` \ | |
219 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
220 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ | |
221 | else \ | |
222 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
223 | echo $(CXX); \ | |
224 | else \ | |
225 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
226 | fi; \ | |
227 | fi` | |
228 | ||
229 | $(start-sanitize-chill) | |
230 | CHILLFLAGS = $(CFLAGS) | |
231 | CHILL = gcc | |
232 | CHILL_FOR_TARGET = ` \ | |
233 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
234 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \ | |
235 | else \ | |
236 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
237 | echo $(CC); \ | |
238 | else \ | |
239 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
240 | fi; \ | |
241 | fi` | |
242 | CHILL_LIB = -lchill | |
1fa66e36 ILT |
243 | |
244 | ## This is ugly, but I don't want GNU make to put these variables in | |
245 | ## the environment. Older makes will see this as a set of targets | |
246 | ## with no dependencies and no actions. | |
247 | unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET : | |
248 | ||
aecc5459 ILT |
249 | $(end-sanitize-chill) |
250 | ||
0b96ed06 FF |
251 | # The use of $$(x_FOR_TARGET) reduces the command line length by not |
252 | # duplicating the lengthy definition. | |
aecc5459 ILT |
253 | TARGET_FLAGS_TO_PASS = \ |
254 | "prefix=$(prefix)" \ | |
255 | "exec_prefix=$(exec_prefix)" \ | |
256 | "against=$(against)" \ | |
0b96ed06 FF |
257 | 'CC=$$(CC_FOR_TARGET)' \ |
258 | "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ | |
aecc5459 ILT |
259 | "CFLAGS=$(CFLAGS)" \ |
260 | $(start-sanitize-chill)\ | |
261 | "CHILLFLAGS=$(CHILLFLAGS)" \ | |
0b96ed06 FF |
262 | 'CHILL=$$(CHILL_FOR_TARGET)' \ |
263 | "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ | |
aecc5459 ILT |
264 | "CHILL_LIB=$(CHILL_LIB)" \ |
265 | $(end-sanitize-chill)\ | |
0b96ed06 FF |
266 | 'CXX=$$(CXX_FOR_TARGET)' \ |
267 | "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ | |
aecc5459 ILT |
268 | "CXXFLAGS=$(CXXFLAGS)" \ |
269 | "MAKEINFO=$(MAKEINFO)" \ | |
270 | "INSTALL=$(INSTALL)" \ | |
271 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ | |
272 | "INSTALL_DATA=$(INSTALL_DATA)" \ | |
e7d3b7d1 RS |
273 | "RUNTEST=$(RUNTEST)" \ |
274 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ | |
aecc5459 ILT |
275 | "BISON=$(BISON)" |
276 | ||
33cf356a SG |
277 | # Source files in the main directory. |
278 | # Files which are included via a config/* Makefile fragment | |
279 | # should *not* be specified here; they're in "ALLDEPFILES". | |
280 | SFILES_MAINDIR = \ | |
2dbde378 | 281 | blockframe.c breakpoint.c command.c core.c demangle.c \ |
33cf356a | 282 | environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ |
7c173357 | 283 | main.c printcmd.c gdbtypes.c \ |
33cf356a SG |
284 | remote.c source.c stack.c symmisc.c symtab.c symfile.c \ |
285 | utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \ | |
b3d4dd73 | 286 | mem-break.c target.c \ |
f4ed8840 | 287 | dbxread.c coffread.c elfread.c dwarfread.c stabsread.c \ |
00cea52f | 288 | language.c parse.c buildsym.c objfiles.c \ |
51b80b00 | 289 | minsyms.c mipsread.c maint.c ch-exp.y c-lang.c ch-lang.c m2-lang.c \ |
a8a69e63 FF |
290 | complaints.c typeprint.c c-typeprint.c ch-typeprint.c m2-typeprint.c \ |
291 | c-valprint.c cp-valprint.c ch-valprint.c m2-valprint.c | |
33cf356a SG |
292 | |
293 | # Source files in subdirectories (which will be handled separately by | |
294 | # 'make gdb.tar.Z'). | |
295 | # Files which are included via a config/* Makefile fragment | |
296 | # should *not* be specified here; they're in "ALLDEPFILES". | |
297 | SFILES_SUBDIR = \ | |
298 | ${srcdir}/vx-share/dbgRpcLib.h \ | |
299 | ${srcdir}/vx-share/ptrace.h \ | |
33cf356a SG |
300 | ${srcdir}/vx-share/vxTypes.h \ |
301 | ${srcdir}/vx-share/vxWorks.h \ | |
302 | ${srcdir}/vx-share/wait.h \ | |
303 | ${srcdir}/vx-share/xdr_ld.h \ | |
304 | ${srcdir}/vx-share/xdr_ptrace.h \ | |
305 | ${srcdir}/vx-share/xdr_rdb.h \ | |
33cf356a SG |
306 | ${srcdir}/nindy-share/b.out.h \ |
307 | ${srcdir}/nindy-share/block_io.h \ | |
308 | ${srcdir}/nindy-share/coff.h \ | |
309 | ${srcdir}/nindy-share/demux.h \ | |
310 | ${srcdir}/nindy-share/env.h \ | |
311 | ${srcdir}/nindy-share/stop.h \ | |
6881fb6d | 312 | ${srcdir}/nindy-share/ttycntl.h \ |
f4ed8840 JG |
313 | ${srcdir}/29k-share/udi_soc |
314 | ||
315 | # Source files in sub-subdirectories. We need to know this because we | |
316 | # make relative symlinks with them. | |
317 | SFILES_SUBSUBDIR = \ | |
6881fb6d SG |
318 | ${srcdir}/29k-share/udi/udiphcfg.h \ |
319 | ${srcdir}/29k-share/udi/udiphsun.h \ | |
320 | ${srcdir}/29k-share/udi/udiproc.h \ | |
321 | ${srcdir}/29k-share/udi/udipt29k.h \ | |
322 | ${srcdir}/29k-share/udi/udiptcfg.h \ | |
323 | ${srcdir}/29k-share/udi/udisoc.h | |
33cf356a SG |
324 | |
325 | # Non-source files in subdirs, that should go into gdb.tar.Z. | |
326 | NONSRC_SUBDIR = \ | |
327 | ${srcdir}/nindy-share/Makefile \ | |
22473f72 JG |
328 | ${srcdir}/nindy-share/VERSION \ |
329 | ${srcdir}/nindy-share/README \ | |
330 | ${srcdir}/vx-share/README | |
33cf356a SG |
331 | |
332 | # All source files that go into linking GDB, except config-specified files. | |
f4ed8840 | 333 | SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) $(SFILES_SUBSUBDIR) |
33cf356a SG |
334 | |
335 | # All source files that lint should look at | |
336 | LINTFILES = $(SFILES) $(YYFILES) init.c | |
337 | ||
338 | # Any additional files specified on these lines should also be added to | |
339 | # the OTHERS = definition below, so they go in the tar files. | |
340 | SFILES_STAND = $(SFILES) standalone.c | |
341 | SFILES_KGDB = $(SFILES) stuff.c kdb-start.c | |
342 | ||
343 | # Header files that are not named in config/* Makefile fragments go here. | |
3402b1cf | 344 | HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h \ |
b50a958c | 345 | environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \ |
00cea52f | 346 | ieee-float.h inferior.h language.h \ |
22473f72 JG |
347 | minimon.h objfiles.h parser-defs.h partial-stab.h \ |
348 | serial.h signals.h solib.h symfile.h symtab.h stabsread.h \ | |
3d9b9577 | 349 | target.h terminal.h typeprint.h xcoffsolib.h value.h \ |
22473f72 | 350 | tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \ |
e6c61372 | 351 | xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \ |
f4ed8840 JG |
352 | nm-trash.h \ |
353 | c-lang.h ch-lang.h m2-lang.h complaints.h \ | |
354 | ns32k-opcode.h \ | |
a8a69e63 | 355 | valprint.h |
33cf356a | 356 | |
22473f72 | 357 | REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar |
33cf356a SG |
358 | |
359 | POSSLIBS_MAINDIR = regex.c regex.h alloca.c | |
360 | POSSLIBS = $(POSSLIBS_MAINDIR) | |
361 | ||
362 | TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c | |
363 | ||
364 | OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \ | |
365 | ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \ | |
22473f72 | 366 | README TODO TAGS NEWS Projects \ |
33cf356a SG |
367 | .gdbinit COPYING $(YYFILES) \ |
368 | copying.c Convex.notes copying.awk \ | |
369 | saber.suppress standalone.c stuff.c kdb-start.c \ | |
cdaa27e9 | 370 | putenv.c gcc.patch |
33cf356a SG |
371 | |
372 | # Subdirectories of gdb, which should be included in their entirety in | |
373 | # gdb-xxx.tar.Z: | |
f4ed8840 | 374 | TARDIRS = doc sparclite # tests |
33cf356a SG |
375 | |
376 | # GDB "info" files, which should be included in their entirety | |
377 | INFOFILES = gdb.info* | |
378 | ||
d40309c7 | 379 | DEPFILES= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES} |
33cf356a SG |
380 | |
381 | SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES) | |
382 | TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} | |
383 | TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ | |
384 | ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR} | |
385 | TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} | |
386 | ||
327f7197 | 387 | OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ |
33cf356a | 388 | values.o eval.o valops.o valarith.o valprint.o printcmd.o \ |
17cb669f | 389 | symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ |
327f7197 | 390 | command.o utils.o expprint.o environ.o gdbtypes.o \ |
3402b1cf | 391 | copying.o $(DEPFILES) mem-break.o target.o \ |
00cea52f | 392 | putenv.o parse.o language.o $(YYOBJ) \ |
781fa085 | 393 | buildsym.o objfiles.o minsyms.o maint.o demangle.o \ |
f4ed8840 | 394 | dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \ |
a8a69e63 FF |
395 | stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \ |
396 | typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \ | |
397 | c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o | |
33cf356a SG |
398 | |
399 | RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) | |
400 | ||
c9c23412 | 401 | TSOBS = inflow.o |
33cf356a SG |
402 | |
403 | NTSOBS = standalone.o | |
404 | ||
405 | TSSTART = /lib/crt0.o | |
406 | ||
407 | NTSSTART = kdb-start.o | |
408 | ||
aecc5459 | 409 | SUBDIRS = doc testsuite |
33cf356a SG |
410 | |
411 | # For now, shortcut the "configure GDB for fewer languages" stuff. | |
e58de8a2 FF |
412 | YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
413 | YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o | |
33cf356a SG |
414 | |
415 | # Prevent Sun make from putting in the machine type. Setting | |
416 | # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. | |
417 | .c.o: | |
418 | ${CC} -c ${INTERNAL_CFLAGS} $< | |
419 | ||
420 | all: gdb | |
aecc5459 | 421 | $(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do |
6fcb280e | 422 | |
e7d3b7d1 RS |
423 | check: force |
424 | rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do | |
33cf356a | 425 | info: force |
2fcc38b8 | 426 | $(MAKE) $(FLAGS_TO_PASS) DO=info "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a | 427 | install-info: force |
2fcc38b8 | 428 | $(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a | 429 | clean-info: force |
2fcc38b8 | 430 | $(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
431 | |
432 | gdb.z:gdb.1 | |
433 | nroff -man $(srcdir)/gdb.1 | col -b > gdb.t | |
434 | pack gdb.t ; rm -f gdb.t | |
435 | mv gdb.t.z gdb.z | |
436 | ||
437 | install: gdb | |
ef131e13 JG |
438 | -parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \ |
439 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi | |
440 | -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi | |
441 | -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \ | |
442 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi | |
443 | -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi | |
b68b44fa ILT |
444 | -n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \ |
445 | $(INSTALL_PROGRAM) gdb $(bindir)/$$n; \ | |
446 | $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1 | |
33cf356a | 447 | $(M_INSTALL) |
2fcc38b8 | 448 | $(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do |
33cf356a SG |
449 | |
450 | init.c: $(srcdir)/munch $(OBS) $(TSOBS) | |
451 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c | |
452 | ||
453 | gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o | |
454 | ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \ | |
455 | init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) | |
456 | ||
457 | saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c | |
458 | #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS | |
459 | #load ./init.c $(SFILES) | |
b076b3f8 FF |
460 | #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y |
461 | #unload ${srcdir}/vx-share/*.h | |
33cf356a | 462 | #unload ${srcdir}/nindy-share/[A-Z]* |
e58de8a2 | 463 | #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
33cf356a | 464 | #load copying.c version.c |
1e4f3c20 | 465 | #load ../opcodes/libopcodes.a |
33cf356a SG |
466 | #load ../libiberty/libiberty.a |
467 | #load ../bfd/libbfd.a | |
468 | #load ../readline/libreadline.a | |
469 | #load ../mmalloc/libmmalloc.a | |
470 | #load -ltermcap | |
471 | #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` | |
472 | echo "Load .c corresponding to:" $(DEPFILES) | |
473 | ||
474 | ||
475 | # This is useful when debugging GDB, because some Unix's don't let you run GDB | |
476 | # on itself without copying the executable. So "make gdb1" will make | |
477 | # gdb and put a copy in gdb1, and you can run it with "gdb gdb1". | |
478 | # Removing gdb1 before the copy is the right thing if gdb1 is open | |
479 | # in another process. | |
480 | gdb1: gdb | |
481 | rm -f gdb1 | |
482 | cp gdb gdb1 | |
483 | ||
484 | # This is a remote stub which runs under unix and starts up an | |
485 | # inferior process. This is at least useful for debugging GDB's | |
486 | # remote support. | |
487 | rapp: $(RAPP_OBS) | |
488 | rm -f rapp_init.c | |
489 | ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c | |
490 | ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) | |
491 | ||
492 | # Support for building Makefile out of configured pieces, automatically | |
493 | # generated dependencies, etc. alldeps.mak is a file that contains | |
494 | # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR, | |
62e859f0 JG |
495 | # ALLDEPFILES_SUBDIR, ALLDEPFILES_SUBSUBDIR, ALLPARAM, and ALLCONFIG, |
496 | # all cadged from the current contents of the config subdirectory. | |
33cf356a SG |
497 | |
498 | alldeps.mak: ${srcdir}/config | |
499 | rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp | |
500 | for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \ | |
501 | echo $$i >>allconfig.tmp; \ | |
502 | awk <$$i ' \ | |
d40309c7 | 503 | $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \ |
a1096574 | 504 | || $$1 == "NATDEPFILES=" { \ |
33cf356a SG |
505 | for (i = 2; i <= NF; i++) \ |
506 | print $$i >> "alldeps.tmp" ; \ | |
507 | } \ | |
f4ed8840 | 508 | $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \ |
33cf356a SG |
509 | print $$2 >> "allparam.tmp" }' ; \ |
510 | done | |
511 | sort <alldeps.tmp | uniq | \ | |
512 | sed -e 's/arm-convert.o/arm-convert.s/' \ | |
513 | -e 's!^Onindy.o!nindy-share/Onindy.c!' \ | |
514 | -e 's!^nindy.o!nindy-share/nindy.c!' \ | |
515 | -e 's!ttybreak.o!nindy-share/ttybreak.c!' \ | |
516 | -e 's!ttyflush.o!nindy-share/ttyflush.c!' \ | |
517 | -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \ | |
518 | -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \ | |
519 | -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \ | |
6881fb6d | 520 | -e 's!udr.o!29k-share/udi/udr.c!' \ |
6881fb6d | 521 | -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \ |
33cf356a SG |
522 | -e 's/\.o/.c/' \ |
523 | >alldeps2.tmp | |
524 | echo '# Start of "alldeps.mak" definitions' \ | |
525 | >>alldeps.mak; | |
62e859f0 | 526 | echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR) $$(ALLDEP_FILES_SUBSUBDIR)' \ |
33cf356a SG |
527 | >>alldeps.mak; |
528 | grep -v / alldeps2.tmp | \ | |
529 | awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ | |
530 | NR == 0 {printf $$0;} \ | |
531 | NR != 0 {printf "\\\n" $$0} \ | |
532 | END {printf "\n\n"}' >>alldeps.mak; | |
62e859f0 | 533 | grep / alldeps2.tmp | grep -v '/.*/' | \ |
33cf356a SG |
534 | awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ |
535 | NR == 0 {printf $$0;} \ | |
536 | NR != 0 {printf "\\\n" $$0} \ | |
537 | END {printf "\n\n"}' >>alldeps.mak; | |
62e859f0 JG |
538 | grep '/.*/' alldeps2.tmp | \ |
539 | awk 'BEGIN {printf "ALLDEPFILES_SUBSUBDIR="} \ | |
540 | NR == 0 {printf $$0;} \ | |
541 | NR != 0 {printf "\\\n" $$0} \ | |
542 | END {printf "\n\n"}' >>alldeps.mak; | |
33cf356a SG |
543 | sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \ |
544 | NR == 0 {printf $$0;} \ | |
545 | NR != 0 {printf "\\\n" $$0} \ | |
546 | END {printf "\n\n"}' >>alldeps.mak; | |
547 | sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \ | |
548 | NR == 0 {printf $$0;} \ | |
549 | NR != 0 {printf "\\\n" $$0} \ | |
550 | END {printf "\n\n"}' >>alldeps.mak; | |
551 | echo '# End of "alldeps.mak" definitions' \ | |
552 | >>alldeps.mak; | |
553 | rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp | |
554 | ||
555 | # The sed script makes everything which depends on {x,t}m.h depend on | |
556 | # config.status as well, in case someone reconfigures gdb out from | |
557 | # under an already compiled gdb. | |
558 | depend: $(SOURCES) Makefile.in | |
559 | @echo Ignore errors about non-existent system-supplied include files | |
560 | @echo for systems other than the one you are using. | |
561 | @echo Also ignore parse errors in valops.c, and any errors in | |
562 | @echo arm-convert.s. | |
b6113cc4 | 563 | touch xm.h tm.h nm.h |
33cf356a | 564 | -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \ |
3402b1cf PB |
565 | -I${READLINE_DIR} $(INCLUDE_CFLAGS) \ |
566 | `ls $(SOURCES) | grep -v '\.[hy]$$' | \ | |
33cf356a SG |
567 | sort -u` >depend.tmp |
568 | # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except | |
b6113cc4 | 569 | # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used |
33cf356a SG |
570 | # by the various subdirectories. |
571 | if [ "${srcdir}" = "." ] ; then \ | |
572 | <depend.tmp sed \ | |
573 | -e 's; ./xm.h; xm.h;g' \ | |
574 | -e 's; ./tm.h; tm.h;g' \ | |
b6113cc4 | 575 | -e 's; ./nm.h; nm.h;g' \ |
33cf356a SG |
576 | -e 's; \./; $${srcdir}/;g' \ |
577 | -e 's; vx-share/; $${srcdir}/vx-share/;g' \ | |
578 | -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \ | |
6881fb6d | 579 | -e 's; 29k-share/; $${srcdir}/29k-share/;g' \ |
33cf356a SG |
580 | >depend.tm2; \ |
581 | rm depend.tmp; \ | |
582 | mv depend.tm2 depend.tmp; \ | |
583 | fi | |
584 | <depend.tmp sed \ | |
585 | -e 's; [xt]m.h;& config.status;g' \ | |
586 | -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \ | |
587 | -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \ | |
588 | -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \ | |
589 | -e 's; ./xm.h; xm.h config.status;g' \ | |
590 | -e 's; ./tm.h; tm.h config.status;g' \ | |
b6113cc4 | 591 | -e 's; ./nm.h; nm.h config.status;g' \ |
33cf356a SG |
592 | >depend |
593 | rm depend.tmp | |
594 | ||
595 | config.status: | |
596 | @echo "You must configure gdb. Look at the README file for details." | |
597 | @false | |
598 | ||
ef131e13 JG |
599 | # This checks the configure.in file versus the config/ directory. |
600 | config-check: config-check-hosts config-check-targets | |
601 | config-check-hosts: | |
602 | grep gdb_host= ${srcdir}/configure.in | \ | |
603 | sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o | |
604 | (cd ${srcdir}/config; ls *.mh) >HOSTdir.o | |
605 | diff -u HOSTconf.o HOSTdir.o | |
606 | ||
607 | config-check-targets: | |
608 | grep gdb_target= ${srcdir}/configure.in | \ | |
609 | sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o | |
610 | (cd ${srcdir}/config; ls *.mt) >TARGdir.o | |
611 | diff -u HOSTconf.o HOSTdir.o | |
612 | ||
33cf356a SG |
613 | # These are not generated by "make depend" because they only are there |
614 | # for some machines. | |
615 | # But these rules don't do what we want; we want to hack the foo.o: tm.h | |
616 | # dependency to do the right thing. | |
617 | tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h | |
618 | tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h | |
619 | xm-news1000.h: xm-news.h | |
620 | xm-i386-sv32.h: xm-i386.h | |
621 | tm-i386gas.h: tm-i386.h | |
622 | xm-sun4os4.h: xm-sparc.h | |
623 | tm-sun4os4.h: tm-sparc.h | |
624 | xm-vaxult.h: xm-vax.h | |
625 | xm-vaxbsd.h: xm-vax.h | |
626 | ||
627 | kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} | |
628 | rm -f init.c | |
629 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c | |
630 | $(CC) $(LDFLAGS) -c init.c $(CLIBS) | |
631 | ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ | |
632 | -lc $(CLIBS) | |
633 | ||
634 | # Put the proper machine-specific files first. | |
635 | # createtags will edit the .o in DEPFILES into .c | |
636 | TAGS: ${TAGFILES} | |
d40309c7 JG |
637 | $(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \ |
638 | $(DEPFILES) ${TAGFILES} | |
33cf356a SG |
639 | tags: TAGS |
640 | ||
641 | # Making distributions of GDB and friends. | |
642 | ||
643 | # Make a directory `proto-gdb.dir' that contains an image of the GDB | |
644 | # directory of the distribution, built up with symlinks. | |
645 | make-proto-gdb.dir: force_update | |
646 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist | |
647 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 | |
648 | ||
649 | # Make a tar file containing the GDB directory of the distribution. | |
650 | gdb.tar.Z: force_update | |
651 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist | |
652 | $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z | |
653 | ||
22473f72 JG |
654 | # Update the "alldeps.mak" file in a source directory. |
655 | update-alldeps: force_update | |
b3d4dd73 | 656 | ../configure none -norecursion |
33cf356a SG |
657 | rm -f alldeps.mak |
658 | $(MAKE) $(MFLAGS) alldeps.mak | |
22473f72 JG |
659 | |
660 | # Update the "depend" and "alldeps.mak" files in a source directory. | |
661 | # We update alldeps.mak first, since it is used to generate the list | |
662 | # of files to be checked for dependencies. | |
663 | update-depend: update-alldeps force_update | |
b3d4dd73 | 664 | ../configure none -norecursion |
33cf356a SG |
665 | rm -f depend |
666 | $(MAKE) $(MFLAGS) depend | |
22473f72 JG |
667 | |
668 | # Set up the GDB source directory for distribution, by building all files that | |
669 | # are products of other files. | |
670 | setup-to-dist: update-depend force_update | |
0da70124 | 671 | ../configure none |
bdec39b3 | 672 | (cd doc; $(MAKE) $(MFLAGS) GDBvn.texi) |
33cf356a SG |
673 | $(MAKE) $(MFLAGS) gdb.info |
674 | $(MAKE) $(MFLAGS) refcard.ps | |
675 | ||
676 | # Build a tar file from a proto-gdb.dir. | |
677 | gdb-$(VERSION).tar.Z: force_update | |
678 | rm -f gdb.tar gdb-$(VERSION).tar.Z | |
679 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 | |
680 | ln -s proto-gdb.dir $(DIST) | |
681 | tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z | |
682 | rm -rf $(DIST) proto-gdb.dir | |
683 | ||
684 | # Build a proto-gdb.dir after GDB has been set up for distribution. | |
685 | # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile | |
686 | # built in the setup-to-dist process, since it defines things like ALLCONFIG | |
687 | # and ALLDEPFILES, that we need. | |
688 | make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info | |
689 | rm -rf proto-gdb.dir | |
690 | mkdir proto-gdb.dir | |
691 | cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done | |
692 | cd proto-gdb.dir ; ln -s ../${INFOFILES} . | |
693 | cd proto-gdb.dir ; for i in ${TARDIRS}; do \ | |
f4ed8840 | 694 | (mkdir $$i; cd $$i; \ |
33cf356a SG |
695 | ln -s ../../$$i/* .; \ |
696 | rm -rf SCCS CVS.adm RCS config.status; \ | |
f4ed8840 | 697 | if test -f Makefile.in; then rm Makefile; else true; fi;); done |
33cf356a SG |
698 | mkdir proto-gdb.dir/config |
699 | cd proto-gdb.dir/config ; \ | |
700 | for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done | |
f4ed8840 JG |
701 | mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share |
702 | mkdir proto-gdb.dir/29k-share proto-gdb.dir/29k-share/udi | |
33cf356a SG |
703 | cd proto-gdb.dir/config ; \ |
704 | for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \ | |
705 | do ln -s ../../$$i ../$$i ; done | |
f4ed8840 | 706 | cd proto-gdb.dir/config ; \ |
62e859f0 | 707 | for i in $(SFILES_SUBSUBDIR) $(ALLDEPFILES_SUBSUBDIR); \ |
f4ed8840 | 708 | do ln -s ../../../$$i ../$$i ; done |
33cf356a SG |
709 | chmod og=u `find . -print` |
710 | ||
711 | clean: | |
712 | rm -f *.o ${ADD_FILES} *~ | |
713 | rm -f init.c version.c | |
714 | rm -f gdb core gdb.tar gdb.tar.Z make.log | |
715 | rm -f gdb[0-9] | |
2fcc38b8 | 716 | @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a | 717 | |
e58de8a2 | 718 | distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
33cf356a SG |
719 | rm -f tm.h xm.h config.status |
720 | rm -f y.output yacc.acts yacc.tmp | |
721 | rm -f ${TESTS} Makefile depend | |
2fcc38b8 | 722 | @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
723 | |
724 | realclean: clean | |
e58de8a2 | 725 | rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
33cf356a SG |
726 | rm -f tm.h xm.h config.status |
727 | rm -f Makefile depend | |
2fcc38b8 | 728 | @$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
729 | |
730 | STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb | |
731 | ||
732 | subdir_do: force | |
733 | @for i in $(DODIRS); do \ | |
734 | if [ -d ./$$i ] ; then \ | |
735 | if (cd ./$$i; \ | |
ef131e13 | 736 | $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ |
33cf356a SG |
737 | else exit 1 ; fi ; \ |
738 | else true ; fi ; \ | |
739 | done | |
d941d8c3 | 740 | |
33cf356a SG |
741 | Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) |
742 | $(SHELL) ./config.status | |
d941d8c3 | 743 | |
33cf356a | 744 | force: |
d941d8c3 | 745 | |
33cf356a SG |
746 | # Documentation! |
747 | # GDB QUICK REFERENCE (TeX dvi file, CM fonts) | |
2b21d8aa | 748 | refcard.dvi: |
ef131e13 | 749 | ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) ) |
33cf356a | 750 | mv ./doc/refcard.dvi . |
d941d8c3 | 751 | |
33cf356a | 752 | # GDB QUICK REFERENCE (PostScript output, common PS fonts) |
2b21d8aa | 753 | refcard.ps: |
ef131e13 | 754 | ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) ) |
33cf356a | 755 | mv ./doc/refcard.ps . |
d941d8c3 | 756 | |
33cf356a | 757 | # GDB MANUAL: TeX dvi file |
259d1dea | 758 | gdb.dvi: |
2b21d8aa | 759 | ( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) ) |
33cf356a | 760 | mv ./doc/gdb.dvi . |
d941d8c3 | 761 | |
33cf356a | 762 | # GDB MANUAL: info file |
259d1dea | 763 | gdb.info: |
24b88ae8 | 764 | ( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) ) |
33cf356a | 765 | mv ./doc/gdb.info* . |
d941d8c3 | 766 | |
33cf356a SG |
767 | # Make copying.c from COPYING |
768 | copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk | |
769 | awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c | |
d941d8c3 | 770 | |
33cf356a SG |
771 | version.c: Makefile |
772 | echo 'char *version = "$(VERSION)";' >version.c | |
d941d8c3 | 773 | |
33cf356a SG |
774 | # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist |
775 | # in srcdir, then compiled in target dir to c-exp.tab.o. | |
f4ed8840 JG |
776 | # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y |
777 | # (some "makes" rewrite the VPATH into command arguments if they match deps). | |
9aa44833 SG |
778 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
779 | # else. | |
33cf356a | 780 | c-exp.tab.o: c-exp.tab.c |
f4ed8840 | 781 | c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in |
33cf356a SG |
782 | @echo 'Expect 4 shift/reduce conflicts.' |
783 | ${YACC} $(srcdir)/c-exp.y | |
9aa44833 SG |
784 | -sed -e '/extern.*malloc/d' \ |
785 | -e '/extern.*realloc/d' \ | |
786 | -e '/extern.*free/d' \ | |
e58de8a2 | 787 | -e '/include.*malloc.h/d' \ |
e35843d4 FF |
788 | -e 's/malloc/xmalloc/g' \ |
789 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 790 | < y.tab.c > ././c-exp.tab.c |
9aa44833 | 791 | -rm y.tab.c |
d941d8c3 | 792 | |
19cfe25d | 793 | # start-sanitize-chill |
e58de8a2 FF |
794 | # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist |
795 | # in srcdir, then compiled in target dir to ch-exp.tab.o. | |
796 | # Remove bogus decls for malloc/realloc/free which conflict with everything | |
797 | # else. | |
798 | ch-exp.tab.o: ch-exp.tab.c | |
f4ed8840 | 799 | ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in |
2fcc38b8 | 800 | @echo 'Expect rules never reduced and {shift,reduce}/reduce conflicts.' |
e58de8a2 FF |
801 | ${YACC} $(srcdir)/ch-exp.y |
802 | -sed -e '/extern.*malloc/d' \ | |
803 | -e '/extern.*realloc/d' \ | |
804 | -e '/extern.*free/d' \ | |
805 | -e '/include.*malloc.h/d' \ | |
806 | -e 's/malloc/xmalloc/g' \ | |
807 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 808 | < y.tab.c > ././ch-exp.tab.c |
e58de8a2 | 809 | -rm y.tab.c |
19cfe25d | 810 | # end-sanitize-chill |
e58de8a2 | 811 | |
33cf356a SG |
812 | # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist |
813 | # in srcdir, then compiled in target dir to m2-exp.tab.o. | |
e58de8a2 FF |
814 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
815 | # else. | |
33cf356a | 816 | m2-exp.tab.o: m2-exp.tab.c |
f4ed8840 | 817 | m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in |
33cf356a | 818 | ${YACC} $(srcdir)/m2-exp.y |
9aa44833 SG |
819 | -sed -e '/extern.*malloc/d' \ |
820 | -e '/extern.*realloc/d' \ | |
821 | -e '/extern.*free/d' \ | |
e58de8a2 | 822 | -e '/include.*malloc.h/d' \ |
e35843d4 FF |
823 | -e 's/malloc/xmalloc/g' \ |
824 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 825 | < y.tab.c > ././m2-exp.tab.c |
9aa44833 | 826 | -rm y.tab.c |
d941d8c3 | 827 | |
a679650f FF |
828 | |
829 | main.o: ${srcdir}/main.c | |
830 | ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $< | |
831 | ||
33cf356a SG |
832 | # The symbol-file readers have dependencies on BFD header files. |
833 | dbxread.o: ${srcdir}/dbxread.c | |
834 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c | |
d941d8c3 | 835 | |
33cf356a SG |
836 | coffread.o: ${srcdir}/coffread.c |
837 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c | |
d941d8c3 | 838 | |
33cf356a SG |
839 | mipsread.o: ${srcdir}/mipsread.c |
840 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c | |
d941d8c3 | 841 | |
33cf356a SG |
842 | elfread.o: ${srcdir}/elfread.c |
843 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c | |
d941d8c3 | 844 | |
33cf356a SG |
845 | dwarfread.o: ${srcdir}/dwarfread.c |
846 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c | |
d941d8c3 | 847 | |
a679650f FF |
848 | stabsread.o: ${srcdir}/stabsread.c |
849 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c | |
850 | ||
f4ed8840 | 851 | # Used on RS/6000 native |
33cf356a SG |
852 | xcoffread.o: ${srcdir}/xcoffread.c |
853 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c | |
d941d8c3 | 854 | |
33cf356a SG |
855 | xcoffexec.o: ${srcdir}/xcoffexec.c |
856 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c | |
d941d8c3 | 857 | |
f4ed8840 | 858 | # Used on HP-PA native |
2fcc38b8 FF |
859 | paread.o: ${srcdir}/paread.c |
860 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c | |
861 | ||
33cf356a | 862 | # Drag in the files that are in another directory. |
d941d8c3 | 863 | |
33cf356a SG |
864 | xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c |
865 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c | |
d941d8c3 | 866 | |
33cf356a SG |
867 | xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c |
868 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c | |
d941d8c3 | 869 | |
33cf356a SG |
870 | xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c |
871 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c | |
d941d8c3 | 872 | |
33cf356a | 873 | nindy.o: ${srcdir}/nindy-share/nindy.c |
6a1f93f6 KR |
874 | ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \ |
875 | ${srcdir}/nindy-share/nindy.c | |
d941d8c3 | 876 | |
33cf356a SG |
877 | Onindy.o: ${srcdir}/nindy-share/Onindy.c |
878 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c | |
d941d8c3 | 879 | |
33cf356a SG |
880 | ttybreak.o: ${srcdir}/nindy-share/ttybreak.c |
881 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c | |
d941d8c3 | 882 | |
33cf356a SG |
883 | ttyflush.o: ${srcdir}/nindy-share/ttyflush.c |
884 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c | |
d941d8c3 | 885 | |
6881fb6d SG |
886 | udr.o: ${srcdir}/29k-share/udi/udr.c |
887 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c | |
888 | ||
889 | udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c | |
890 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c | |
891 | ||
33cf356a SG |
892 | lint: $(LINTFILES) |
893 | $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ | |
894 | `echo ${DEPFILES} | sed 's/\.o /\.c /g' | |
d941d8c3 | 895 | |
33cf356a SG |
896 | gdb.cxref: $(SFILES) |
897 | cxref -I. $(SFILES) >gdb.cxref | |
d941d8c3 | 898 | |
33cf356a | 899 | force_update: |
d941d8c3 | 900 | |
33cf356a SG |
901 | # GNU Make has an annoying habit of putting *all* the Makefile variables |
902 | # into the environment, unless you include this target as a circumvention. | |
903 | # Rumor is that this will be fixed (and this target can be removed) | |
904 | # in GNU Make 4.0. | |
905 | .NOEXPORT: | |
d941d8c3 | 906 | |
aecc5459 ILT |
907 | # GNU Make 3.63 has a different problem: it keeps tacking command line |
908 | # overrides onto the definition of $(MAKE). This variable setting | |
909 | # will remove them. | |
910 | MAKEOVERRIDES= | |
911 | ||
33cf356a SG |
912 | # This is the end of "Makefile.in". When built into "Makefile" |
913 | # by the configure script, two things are added below this point: | |
914 | # alldeps.mak -- defintions of all files that are used in | |
915 | # host- or target-dependent configurations | |
916 | # depend -- what .o files depend on what .c and .h files, | |
917 | # for all configurations. | |
3e5afc2c RP |
918 | |
919 |