Commit | Line | Data |
---|---|---|
62e859f0 | 1 | #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc. |
33cf356a SG |
2 | |
3 | # This file is part of GDB. | |
4 | ||
5 | # This program is free software; you can redistribute it and/or modify | |
3e5afc2c RP |
6 | # it under the terms of the GNU General Public License as published by |
7 | # the Free Software Foundation; either version 2 of the License, or | |
8 | # (at your option) any later version. | |
9 | # | |
10 | # This program is distributed in the hope that it will be useful, | |
11 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | # GNU General Public License for more details. | |
14 | # | |
15 | # You should have received a copy of the GNU General Public License | |
16 | # along with this program; if not, write to the Free Software | |
33cf356a | 17 | # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
3e5afc2c RP |
18 | |
19 | prefix = /usr/local | |
20 | ||
b68b44fa | 21 | program_transform_name = |
4db3902a RP |
22 | exec_prefix = $(prefix) |
23 | bindir = $(exec_prefix)/bin | |
24 | libdir = $(exec_prefix)/lib | |
6a1f93f6 | 25 | tooldir = $(libdir)/$(target_alias) |
4db3902a | 26 | |
3e5afc2c | 27 | datadir = $(prefix)/lib |
4db3902a | 28 | mandir = $(prefix)/man |
3e5afc2c RP |
29 | man1dir = $(mandir)/man1 |
30 | man2dir = $(mandir)/man2 | |
31 | man3dir = $(mandir)/man3 | |
32 | man4dir = $(mandir)/man4 | |
33 | man5dir = $(mandir)/man5 | |
34 | man6dir = $(mandir)/man6 | |
35 | man7dir = $(mandir)/man7 | |
36 | man8dir = $(mandir)/man8 | |
37 | man9dir = $(mandir)/man9 | |
4db3902a | 38 | infodir = $(prefix)/info |
3e5afc2c RP |
39 | includedir = $(prefix)/include |
40 | docdir = $(datadir)/doc | |
41 | ||
42 | SHELL = /bin/sh | |
43 | ||
44 | INSTALL = install -c | |
45 | INSTALL_PROGRAM = $(INSTALL) | |
46 | INSTALL_DATA = $(INSTALL) | |
47 | ||
48 | AR = ar | |
33cf356a | 49 | AR_FLAGS = qv |
3e5afc2c RP |
50 | RANLIB = ranlib |
51 | ||
33cf356a SG |
52 | # Flags that describe where you can find the termcap library. |
53 | # This can be overridden in the host Makefile fragment file. | |
54 | TERMCAP = -ltermcap | |
55 | ||
56 | # System V: If you compile gdb with a compiler which uses the coff | |
57 | # encapsulation feature (this is a function of the compiler used, NOT | |
58 | # of the m-?.h file selected by config.gdb), you must make sure that | |
59 | # the GNU nm is the one that is used by munch. | |
60 | ||
61 | # If you are compiling with GCC, make sure that either 1) You use the | |
62 | # -traditional flag, or 2) You have the fixed include files where GCC | |
63 | # can reach them. Otherwise the ioctl calls in inflow.c | |
64 | # will be incorrectly compiled. The "fixincludes" script in the gcc | |
65 | # distribution will fix your include files up. | |
66 | #CC=cc | |
67 | #CC=gcc -traditional | |
68 | GCC=gcc | |
69 | ||
70 | # Directory containing source files. Don't clean up the spacing, | |
71 | # this exact string is matched for by the "configure" script. | |
72 | srcdir = . | |
d941d8c3 | 73 | |
33cf356a SG |
74 | # It is also possible that you will need to add -I/usr/include/sys to the |
75 | # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which | |
76 | # is where it should be according to Posix). | |
77 | ||
19d0f3f4 FF |
78 | # If you use bison instead of yacc, it needs to include the "-y" argument. |
79 | #BISON="bison -y" | |
33cf356a SG |
80 | BISON=yacc |
81 | YACC=$(BISON) | |
33cf356a | 82 | |
33cf356a | 83 | # where to find texinfo; GDB dist should include a recent one |
967007ca | 84 | TEXIDIR=${srcdir}/../texinfo |
33cf356a SG |
85 | |
86 | # where to find makeinfo, preferably one designed for texinfo-2 | |
87 | MAKEINFO=makeinfo | |
88 | ||
89 | # Set this up with gcc if you have gnu ld and the loader will print out | |
90 | # line numbers for undefinded refs. | |
91 | #CC-LD=gcc -static | |
92 | CC-LD=${CC} | |
93 | ||
94 | # Where is the "include" directory? Traditionally ../include or ./include | |
95 | INCLUDE_DIR = ${srcdir}/../include | |
96 | INCLUDE_DEP = $$(INCLUDE_DIR) | |
97 | ||
98 | # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc | |
99 | # or ./mmalloc (When we want the binary library built from it, we use | |
100 | # ${MMALLOC_DIR}${subdir}.) | |
101 | # Note that mmalloc can still be used on systems without mmap(). | |
102 | # To use your system malloc, comment out the following defines. | |
103 | MMALLOC_DIR = ${srcdir}/../mmalloc | |
104 | MMALLOC_DEP = $$(MMALLOC_DIR) | |
105 | MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a | |
106 | # To use your system malloc, uncomment MMALLOC_DISABLE. | |
107 | #MMALLOC_DISABLE = -DNO_MMALLOC | |
108 | # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK | |
109 | #MMALLOC_CHECK = -DNO_MMALLOC_CHECK | |
110 | MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE} | |
111 | ||
112 | # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd | |
113 | # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) | |
114 | BFD_DIR = ${srcdir}/../bfd | |
115 | BFD_DEP = $$(BFD_DIR) | |
116 | BFD_LIB = ./../bfd${subdir}/libbfd.a | |
117 | ||
118 | # Where is the source dir for the READLINE library? Traditionally in .. or . | |
119 | # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) | |
120 | READLINE_DIR = ${srcdir}/../readline | |
121 | READLINE_DEP = $$(READLINE_DIR) | |
122 | RL_LIB = ./../readline${subdir}/libreadline.a | |
123 | ||
124 | # All the includes used for CFLAGS and for lint. | |
125 | # -I. for config files. | |
126 | # -I${srcdir} possibly for regex.h also. | |
1a0edbc7 FF |
127 | # -I${srcdir}/config for more generic config files. |
128 | INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/config -I$(INCLUDE_DIR) | |
33cf356a SG |
129 | |
130 | # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS | |
131 | # from the config/ directory. | |
132 | GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} | |
133 | #PROFILE_CFLAGS = -pg | |
134 | ||
135 | # CFLAGS is specifically reserved for setting from the command line | |
136 | # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". | |
137 | CFLAGS = -g | |
138 | # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. | |
139 | INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} | |
140 | # None of the things in CFLAGS will do any harm, and on some systems | |
d40309c7 | 141 | # (e.g. SunOS4) it is important to use the MH_CFLAGS. |
33cf356a SG |
142 | LDFLAGS = $(CFLAGS) |
143 | ||
144 | # Where is the "-liberty" library, containing getopt and obstack? | |
145 | LIBIBERTY_DIR = ${srcdir}/../libiberty | |
146 | LIBIBERTY = ./../libiberty${subdir}/libiberty.a | |
147 | ||
1e4f3c20 KR |
148 | # Where is the "-lopcodes" library, with (some of) the opcode tables and |
149 | # disassemblers? | |
150 | OPCODES = ./../opcodes${subdir}/libopcodes.a | |
151 | ||
33cf356a SG |
152 | # The config/mh-* file must define REGEX and REGEX1 on USG machines. |
153 | # If your sysyem is missing alloca(), or, more likely, it's there but | |
154 | # it doesn't work, define ALLOCA & ALLOCA1 too. | |
33cf356a SG |
155 | |
156 | # Libraries and corresponding dependencies for compiling gdb. | |
157 | # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. | |
158 | # TERMCAP comes after readline, since readline depends on it. | |
d40309c7 JG |
159 | CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \ |
160 | ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} | |
161 | CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \ | |
072b552a | 162 | ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} |
33cf356a | 163 | |
d40309c7 JG |
164 | ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} |
165 | ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} | |
33cf356a | 166 | |
3717e95b | 167 | VERSION = 4.8.4 |
33cf356a SG |
168 | DIST=gdb |
169 | ||
170 | LINT=/usr/5bin/lint | |
171 | LINTFLAGS= -I${BFD_DIR} | |
172 | ||
e7d3b7d1 RS |
173 | RUNTEST=runtest |
174 | RUNTESTFLAGS= | |
6fcb280e | 175 | |
33cf356a SG |
176 | # Host and target-dependent makefile fragments come in here. |
177 | #### | |
178 | # End of host and target-dependent makefile fragments | |
179 | ||
ef131e13 | 180 | FLAGS_TO_PASS = \ |
2fcc38b8 FF |
181 | "prefix=$(prefix)" \ |
182 | "exec_prefix=$(exec_prefix)" \ | |
ef131e13 JG |
183 | "against=$(against)" \ |
184 | "AR=$(AR)" \ | |
185 | "AR_FLAGS=$(AR_FLAGS)" \ | |
186 | "CC=$(CC)" \ | |
187 | "CFLAGS=$(CFLAGS)" \ | |
aecc5459 ILT |
188 | "CHILLFLAGS=$(CHILLFLAGS)" \ |
189 | "CHILL=$(CHILL)" \ | |
190 | "CHILL_LIB=$(CHILL_LIB)" \ | |
aecc5459 ILT |
191 | "CXX=$(CXX)" \ |
192 | "CXXFLAGS=$(CXXFLAGS)" \ | |
ef131e13 JG |
193 | "RANLIB=$(RANLIB)" \ |
194 | "MAKEINFO=$(MAKEINFO)" \ | |
195 | "INSTALL=$(INSTALL)" \ | |
196 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ | |
197 | "INSTALL_DATA=$(INSTALL_DATA)" \ | |
e7d3b7d1 RS |
198 | "RUNTEST=$(RUNTEST)" \ |
199 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ | |
ef131e13 JG |
200 | "BISON=$(BISON)" |
201 | ||
aecc5459 ILT |
202 | # Flags that we pass when building the testsuite. |
203 | ||
204 | CC_FOR_TARGET = ` \ | |
205 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
206 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ | |
207 | else \ | |
208 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
209 | echo $(CC); \ | |
210 | else \ | |
211 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
212 | fi; \ | |
213 | fi` | |
214 | ||
215 | CXX = gcc | |
216 | ||
217 | CXX_FOR_TARGET = ` \ | |
218 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
219 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ | |
220 | else \ | |
221 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
222 | echo $(CXX); \ | |
223 | else \ | |
224 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
225 | fi; \ | |
226 | fi` | |
227 | ||
aecc5459 ILT |
228 | CHILLFLAGS = $(CFLAGS) |
229 | CHILL = gcc | |
230 | CHILL_FOR_TARGET = ` \ | |
231 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ | |
232 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \ | |
233 | else \ | |
234 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ | |
235 | echo $(CC); \ | |
236 | else \ | |
237 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ | |
238 | fi; \ | |
239 | fi` | |
240 | CHILL_LIB = -lchill | |
1fa66e36 | 241 | |
0b96ed06 FF |
242 | # The use of $$(x_FOR_TARGET) reduces the command line length by not |
243 | # duplicating the lengthy definition. | |
aecc5459 ILT |
244 | TARGET_FLAGS_TO_PASS = \ |
245 | "prefix=$(prefix)" \ | |
246 | "exec_prefix=$(exec_prefix)" \ | |
247 | "against=$(against)" \ | |
0b96ed06 FF |
248 | 'CC=$$(CC_FOR_TARGET)' \ |
249 | "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ | |
aecc5459 | 250 | "CFLAGS=$(CFLAGS)" \ |
aecc5459 | 251 | "CHILLFLAGS=$(CHILLFLAGS)" \ |
0b96ed06 FF |
252 | 'CHILL=$$(CHILL_FOR_TARGET)' \ |
253 | "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ | |
aecc5459 | 254 | "CHILL_LIB=$(CHILL_LIB)" \ |
0b96ed06 FF |
255 | 'CXX=$$(CXX_FOR_TARGET)' \ |
256 | "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ | |
aecc5459 ILT |
257 | "CXXFLAGS=$(CXXFLAGS)" \ |
258 | "MAKEINFO=$(MAKEINFO)" \ | |
259 | "INSTALL=$(INSTALL)" \ | |
260 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ | |
261 | "INSTALL_DATA=$(INSTALL_DATA)" \ | |
e7d3b7d1 RS |
262 | "RUNTEST=$(RUNTEST)" \ |
263 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ | |
aecc5459 ILT |
264 | "BISON=$(BISON)" |
265 | ||
33cf356a | 266 | # All source files that go into linking GDB, except config-specified files. |
2531303c FF |
267 | # Source files which are included via a config/*/* Makefile fragment should |
268 | # *not* be specified here; they're in "ALLDEPFILES". | |
24c2857c JK |
269 | SFILES = ${srcdir}/blockframe.c ${srcdir}/breakpoint.c ${srcdir}/buildsym.c \ |
270 | ${srcdir}/c-exp.y ${srcdir}/c-lang.c ${srcdir}/c-typeprint.c \ | |
271 | ${srcdir}/c-valprint.c ${srcdir}/ch-exp.y ${srcdir}/ch-lang.c \ | |
272 | ${srcdir}/ch-typeprint.c ${srcdir}/ch-valprint.c ${srcdir}/coffread.c \ | |
273 | ${srcdir}/command.c ${srcdir}/complaints.c ${srcdir}/core.c \ | |
274 | ${srcdir}/cp-valprint.c ${srcdir}/dbxread.c ${srcdir}/demangle.c \ | |
275 | ${srcdir}/dwarfread.c ${srcdir}/elfread.c ${srcdir}/environ.c \ | |
276 | ${srcdir}/eval.c ${srcdir}/expprint.c ${srcdir}/findvar.c \ | |
277 | ${srcdir}/gdbtypes.c \ | |
278 | ${srcdir}/infcmd.c ${srcdir}/inflow.c ${srcdir}/infrun.c \ | |
279 | ${srcdir}/language.c ${srcdir}/m2-exp.y ${srcdir}/m2-lang.c \ | |
280 | ${srcdir}/m2-typeprint.c \ | |
281 | ${srcdir}/m2-valprint.c ${srcdir}/main.c ${srcdir}/maint.c \ | |
282 | ${srcdir}/mem-break.c ${srcdir}/minsyms.c ${srcdir}/mipsread.c \ | |
283 | ${srcdir}/objfiles.c ${srcdir}/parse.c ${srcdir}/printcmd.c \ | |
284 | ${srcdir}/remote.c ${srcdir}/source.c ${srcdir}/stabsread.c \ | |
285 | ${srcdir}/stack.c \ | |
286 | ${srcdir}/symfile.c ${srcdir}/symmisc.c ${srcdir}/symtab.c \ | |
287 | ${srcdir}/target.c ${srcdir}/typeprint.c ${srcdir}/utils.c \ | |
288 | ${srcdir}/valarith.c \ | |
289 | ${srcdir}/valops.c ${srcdir}/valprint.c ${srcdir}/values.c \ | |
d5f608a4 | 290 | ${srcdir}/serial.c ser-hardwire.c ${srcdir}/ser-go32.c ${srcdir}/ser-unix.c |
2531303c FF |
291 | |
292 | # Files that are not source code, but need to go into gdb-$(VERSION).tar.Z. | |
24c2857c JK |
293 | NONSRC = ${srcdir}/Makefile.in ${srcdir}/depend ${srcdir}/alldeps.mak \ |
294 | ${srcdir}/munch ${srcdir}/configure.in \ | |
295 | ${srcdir}/ChangeLog ${srcdir}/ChangeLog-9091 ${srcdir}/ChangeLog-3.x \ | |
296 | ${srcdir}/gdb.1 ${srcdir}/refcard.ps ${srcdir}/README ${srcdir}/TODO \ | |
297 | TAGS ${srcdir}/NEWS ${srcdir}/Projects ${srcdir}/.gdbinit \ | |
298 | ${srcdir}/COPYING $(YYFILES) ${srcdir}/copying.c \ | |
299 | ${srcdir}/copying.awk \ | |
300 | ${srcdir}/saber.suppress ${srcdir}/standalone.c ${srcdir}/stuff.c \ | |
301 | ${srcdir}/kdb-start.c ${srcdir}/putenv.c ${srcdir}/gcc.patch \ | |
2531303c FF |
302 | ${srcdir}/nindy-share/Makefile ${srcdir}/nindy-share/VERSION \ |
303 | ${srcdir}/nindy-share/README ${srcdir}/vx-share/README \ | |
304 | ${srcdir}/config/convex/Convex.notes | |
305 | ||
33cf356a SG |
306 | # All source files that lint should look at |
307 | LINTFILES = $(SFILES) $(YYFILES) init.c | |
308 | ||
309 | # Any additional files specified on these lines should also be added to | |
2531303c | 310 | # the NONSRC definition, so they go in the tar files. |
33cf356a SG |
311 | SFILES_STAND = $(SFILES) standalone.c |
312 | SFILES_KGDB = $(SFILES) stuff.c kdb-start.c | |
313 | ||
1a0edbc7 | 314 | # Header files that are not named in config/*/* Makefile fragments go here. |
24c2857c JK |
315 | HFILES = ${srcdir}/breakpoint.h ${srcdir}/buildsym.h ${srcdir}/call-cmds.h \ |
316 | ${srcdir}/command.h ${srcdir}/defs.h ${srcdir}/environ.h \ | |
317 | ${srcdir}/expression.h ${srcdir}/frame.h ${srcdir}/gdbcmd.h \ | |
318 | ${srcdir}/gdbcore.h ${srcdir}/gdbtypes.h ${srcdir}/gdb-stabs.h \ | |
319 | ${srcdir}/inferior.h ${srcdir}/language.h ${srcdir}/minimon.h \ | |
320 | ${srcdir}/objfiles.h ${srcdir}/parser-defs.h \ | |
321 | ${srcdir}/partial-stab.h ${srcdir}/serial.h ${srcdir}/signals.h \ | |
322 | ${srcdir}/solib.h ${srcdir}/symfile.h ${srcdir}/symtab.h \ | |
323 | ${srcdir}/stabsread.h ${srcdir}/target.h ${srcdir}/terminal.h \ | |
324 | ${srcdir}/typeprint.h ${srcdir}/xcoffsolib.h ${srcdir}/value.h \ | |
325 | ${srcdir}/c-lang.h ${srcdir}/ch-lang.h ${srcdir}/m2-lang.h \ | |
326 | ${srcdir}/complaints.h ${srcdir}/ns32k-opcode.h ${srcdir}/valprint.h \ | |
327 | ${srcdir}/config/m68k/tm-m68k.h ${srcdir}/config/pa/tm-hppa.h \ | |
328 | ${srcdir}/config/i960/tm-i960.h ${srcdir}/config/sparc/tm-sparc.h \ | |
329 | ${srcdir}/config/tm-sunos.h \ | |
330 | ${srcdir}/config/tm-sysv4.h ${srcdir}/config/m68k/xm-m68k.h \ | |
331 | ${srcdir}/config/sparc/xm-sparc.h \ | |
332 | ${srcdir}/config/xm-sysv4.h ${srcdir}/config/vax/xm-vax.h \ | |
333 | ${srcdir}/config/nm-trash.h \ | |
2531303c FF |
334 | ${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphsun.h \ |
335 | ${srcdir}/29k-share/udi/udiproc.h ${srcdir}/29k-share/udi/udipt29k.h \ | |
336 | ${srcdir}/29k-share/udi/udiptcfg.h ${srcdir}/29k-share/udi/udisoc.h \ | |
337 | ${srcdir}/29k-share/udi_soc ${srcdir}/nindy-share/b.out.h \ | |
338 | ${srcdir}/nindy-share/block_io.h ${srcdir}/nindy-share/coff.h \ | |
339 | ${srcdir}/nindy-share/demux.h ${srcdir}/nindy-share/env.h \ | |
340 | ${srcdir}/nindy-share/stop.h ${srcdir}/nindy-share/ttycntl.h \ | |
341 | ${srcdir}/vx-share/dbgRpcLib.h ${srcdir}/vx-share/ptrace.h \ | |
342 | ${srcdir}/vx-share/vxTypes.h ${srcdir}/vx-share/vxWorks.h \ | |
343 | ${srcdir}/vx-share/wait.h ${srcdir}/vx-share/xdr_ld.h \ | |
344 | ${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_rdb.h | |
345 | ||
346 | # GDB "info" files, which should be included in their entirety | |
347 | INFOFILES = gdb.info* | |
33cf356a | 348 | |
22473f72 | 349 | REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar |
33cf356a | 350 | |
24c2857c | 351 | POSSLIBS = ${srcdir}/regex.c ${srcdir}/regex.h ${srcdir}/alloca.c |
33cf356a SG |
352 | |
353 | TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c | |
354 | ||
33cf356a SG |
355 | # Subdirectories of gdb, which should be included in their entirety in |
356 | # gdb-xxx.tar.Z: | |
f4ed8840 | 357 | TARDIRS = doc sparclite # tests |
33cf356a | 358 | |
2531303c | 359 | DEPFILES = ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES} |
33cf356a | 360 | |
2531303c | 361 | SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) |
33cf356a | 362 | TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} |
2531303c FF |
363 | |
364 | TARFILES = ${SFILES} ${HFILES} ${NONSRC} ${ALLDEPFILES} $(ALLCONFIG) \ | |
0f0834c5 | 365 | $(ALLPARAM) $(INFOFILES) ${POSSLIBS} ${REMOTE_EXAMPLES} |
33cf356a | 366 | |
327f7197 | 367 | OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ |
33cf356a | 368 | values.o eval.o valops.o valarith.o valprint.o printcmd.o \ |
17cb669f | 369 | symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ |
327f7197 | 370 | command.o utils.o expprint.o environ.o gdbtypes.o \ |
3402b1cf | 371 | copying.o $(DEPFILES) mem-break.o target.o \ |
00cea52f | 372 | putenv.o parse.o language.o $(YYOBJ) \ |
781fa085 | 373 | buildsym.o objfiles.o minsyms.o maint.o demangle.o \ |
f4ed8840 | 374 | dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \ |
a8a69e63 FF |
375 | stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \ |
376 | typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \ | |
4e772f44 SG |
377 | c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \ |
378 | serial.o ser-hardwire.o | |
33cf356a SG |
379 | |
380 | RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) | |
381 | ||
c9c23412 | 382 | TSOBS = inflow.o |
33cf356a SG |
383 | |
384 | NTSOBS = standalone.o | |
385 | ||
386 | TSSTART = /lib/crt0.o | |
387 | ||
388 | NTSSTART = kdb-start.o | |
389 | ||
aecc5459 | 390 | SUBDIRS = doc testsuite |
33cf356a SG |
391 | |
392 | # For now, shortcut the "configure GDB for fewer languages" stuff. | |
e58de8a2 FF |
393 | YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
394 | YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o | |
33cf356a SG |
395 | |
396 | # Prevent Sun make from putting in the machine type. Setting | |
397 | # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. | |
398 | .c.o: | |
399 | ${CC} -c ${INTERNAL_CFLAGS} $< | |
400 | ||
401 | all: gdb | |
0139c441 | 402 | @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do |
6fcb280e | 403 | |
80c8fd72 | 404 | installcheck: |
e7d3b7d1 | 405 | check: force |
0139c441 | 406 | @rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do |
b396a969 | 407 | info dvi: force |
0139c441 | 408 | @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a | 409 | install-info: force |
0139c441 | 410 | @$(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a | 411 | clean-info: force |
0139c441 | 412 | @$(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
413 | |
414 | gdb.z:gdb.1 | |
415 | nroff -man $(srcdir)/gdb.1 | col -b > gdb.t | |
416 | pack gdb.t ; rm -f gdb.t | |
417 | mv gdb.t.z gdb.z | |
418 | ||
419 | install: gdb | |
ef131e13 JG |
420 | -parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \ |
421 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi | |
422 | -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi | |
423 | -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \ | |
424 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi | |
425 | -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi | |
b68b44fa ILT |
426 | -n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \ |
427 | $(INSTALL_PROGRAM) gdb $(bindir)/$$n; \ | |
428 | $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1 | |
33cf356a | 429 | $(M_INSTALL) |
0139c441 | 430 | @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do |
33cf356a SG |
431 | |
432 | init.c: $(srcdir)/munch $(OBS) $(TSOBS) | |
433 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c | |
434 | ||
435 | gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o | |
436 | ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \ | |
437 | init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) | |
438 | ||
439 | saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c | |
440 | #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS | |
441 | #load ./init.c $(SFILES) | |
b076b3f8 FF |
442 | #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y |
443 | #unload ${srcdir}/vx-share/*.h | |
33cf356a | 444 | #unload ${srcdir}/nindy-share/[A-Z]* |
e58de8a2 | 445 | #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
33cf356a | 446 | #load copying.c version.c |
1e4f3c20 | 447 | #load ../opcodes/libopcodes.a |
33cf356a SG |
448 | #load ../libiberty/libiberty.a |
449 | #load ../bfd/libbfd.a | |
450 | #load ../readline/libreadline.a | |
451 | #load ../mmalloc/libmmalloc.a | |
452 | #load -ltermcap | |
453 | #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` | |
454 | echo "Load .c corresponding to:" $(DEPFILES) | |
455 | ||
456 | ||
457 | # This is useful when debugging GDB, because some Unix's don't let you run GDB | |
458 | # on itself without copying the executable. So "make gdb1" will make | |
459 | # gdb and put a copy in gdb1, and you can run it with "gdb gdb1". | |
460 | # Removing gdb1 before the copy is the right thing if gdb1 is open | |
461 | # in another process. | |
462 | gdb1: gdb | |
463 | rm -f gdb1 | |
464 | cp gdb gdb1 | |
465 | ||
466 | # This is a remote stub which runs under unix and starts up an | |
467 | # inferior process. This is at least useful for debugging GDB's | |
468 | # remote support. | |
469 | rapp: $(RAPP_OBS) | |
470 | rm -f rapp_init.c | |
471 | ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c | |
472 | ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) | |
473 | ||
474 | # Support for building Makefile out of configured pieces, automatically | |
475 | # generated dependencies, etc. alldeps.mak is a file that contains | |
2531303c FF |
476 | # "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG, |
477 | # all cadged from the current contents of the config subtree. | |
33cf356a | 478 | |
2531303c FF |
479 | alldeps.mak: force |
480 | rm -f alldeps.mak alldeps*.tmp allparam*.tmp allconfig*.tmp | |
24c2857c | 481 | for i in `(cd ${srcdir}; find config -name '*.m[ht]' -print)` ; do \ |
33cf356a | 482 | echo $$i >>allconfig.tmp; \ |
24c2857c | 483 | awk <${srcdir}/$$i ' \ |
d40309c7 | 484 | $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \ |
2531303c | 485 | || $$1 == "NATDEPFILES=" { \ |
33cf356a SG |
486 | for (i = 2; i <= NF; i++) \ |
487 | print $$i >> "alldeps.tmp" ; \ | |
488 | } \ | |
f4ed8840 | 489 | $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \ |
33cf356a SG |
490 | print $$2 >> "allparam.tmp" }' ; \ |
491 | done | |
492 | sort <alldeps.tmp | uniq | \ | |
493 | sed -e 's/arm-convert.o/arm-convert.s/' \ | |
494 | -e 's!^Onindy.o!nindy-share/Onindy.c!' \ | |
495 | -e 's!^nindy.o!nindy-share/nindy.c!' \ | |
496 | -e 's!ttybreak.o!nindy-share/ttybreak.c!' \ | |
497 | -e 's!ttyflush.o!nindy-share/ttyflush.c!' \ | |
498 | -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \ | |
499 | -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \ | |
500 | -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \ | |
6881fb6d | 501 | -e 's!udr.o!29k-share/udi/udr.c!' \ |
6881fb6d | 502 | -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \ |
2531303c FF |
503 | -e '/..\/sim\//d' \ |
504 | -e '/..\/opcodes\//d' \ | |
33cf356a SG |
505 | -e 's/\.o/.c/' \ |
506 | >alldeps2.tmp | |
1a0edbc7 | 507 | for i in `cat allparam.tmp` ; do \ |
24c2857c JK |
508 | (cd ${srcdir} ; \ |
509 | find config -name $$i -print ) >>allparam2.tmp ; \ | |
1a0edbc7 | 510 | done |
2531303c FF |
511 | echo '# Start of "alldeps.mak" definitions' >>alldeps.mak; |
512 | sort <alldeps2.tmp | uniq | awk 'BEGIN {printf "ALLDEPFILES="} \ | |
24c2857c JK |
513 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
514 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ | |
2531303c | 515 | END {printf "\n\n"}' >>alldeps.mak; |
1a0edbc7 | 516 | sort <allparam2.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \ |
24c2857c JK |
517 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
518 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ | |
2531303c | 519 | END {printf "\n\n"}' >>alldeps.mak; |
33cf356a | 520 | sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \ |
24c2857c JK |
521 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
522 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ | |
2531303c FF |
523 | END {printf "\n\n"}' >>alldeps.mak; |
524 | echo '# End of "alldeps.mak" definitions' >>alldeps.mak; | |
525 | rm -f alldeps*.tmp allparam*.tmp allconfig*.tmp | |
33cf356a SG |
526 | |
527 | # The sed script makes everything which depends on {x,t}m.h depend on | |
528 | # config.status as well, in case someone reconfigures gdb out from | |
529 | # under an already compiled gdb. | |
530 | depend: $(SOURCES) Makefile.in | |
531 | @echo Ignore errors about non-existent system-supplied include files | |
532 | @echo for systems other than the one you are using. | |
ee7e82fe | 533 | @echo Also ignore any errors in arm-convert.s. |
33cf356a | 534 | -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \ |
3402b1cf PB |
535 | -I${READLINE_DIR} $(INCLUDE_CFLAGS) \ |
536 | `ls $(SOURCES) | grep -v '\.[hy]$$' | \ | |
33cf356a SG |
537 | sort -u` >depend.tmp |
538 | # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except | |
b6113cc4 | 539 | # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used |
33cf356a SG |
540 | # by the various subdirectories. |
541 | if [ "${srcdir}" = "." ] ; then \ | |
542 | <depend.tmp sed \ | |
543 | -e 's; ./xm.h; xm.h;g' \ | |
544 | -e 's; ./tm.h; tm.h;g' \ | |
b6113cc4 | 545 | -e 's; ./nm.h; nm.h;g' \ |
33cf356a SG |
546 | -e 's; \./; $${srcdir}/;g' \ |
547 | -e 's; vx-share/; $${srcdir}/vx-share/;g' \ | |
548 | -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \ | |
6881fb6d | 549 | -e 's; 29k-share/; $${srcdir}/29k-share/;g' \ |
33cf356a SG |
550 | >depend.tm2; \ |
551 | rm depend.tmp; \ | |
552 | mv depend.tm2 depend.tmp; \ | |
553 | fi | |
554 | <depend.tmp sed \ | |
555 | -e 's; [xt]m.h;& config.status;g' \ | |
556 | -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \ | |
557 | -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \ | |
558 | -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \ | |
559 | -e 's; ./xm.h; xm.h config.status;g' \ | |
560 | -e 's; ./tm.h; tm.h config.status;g' \ | |
b6113cc4 | 561 | -e 's; ./nm.h; nm.h config.status;g' \ |
33cf356a SG |
562 | >depend |
563 | rm depend.tmp | |
564 | ||
565 | config.status: | |
566 | @echo "You must configure gdb. Look at the README file for details." | |
567 | @false | |
568 | ||
ef131e13 JG |
569 | # This checks the configure.in file versus the config/ directory. |
570 | config-check: config-check-hosts config-check-targets | |
571 | config-check-hosts: | |
572 | grep gdb_host= ${srcdir}/configure.in | \ | |
573 | sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o | |
574 | (cd ${srcdir}/config; ls *.mh) >HOSTdir.o | |
575 | diff -u HOSTconf.o HOSTdir.o | |
576 | ||
577 | config-check-targets: | |
578 | grep gdb_target= ${srcdir}/configure.in | \ | |
579 | sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o | |
580 | (cd ${srcdir}/config; ls *.mt) >TARGdir.o | |
581 | diff -u HOSTconf.o HOSTdir.o | |
582 | ||
33cf356a SG |
583 | # These are not generated by "make depend" because they only are there |
584 | # for some machines. | |
585 | # But these rules don't do what we want; we want to hack the foo.o: tm.h | |
586 | # dependency to do the right thing. | |
2225eb85 FF |
587 | tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h |
588 | tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h | |
33cf356a SG |
589 | xm-news1000.h: xm-news.h |
590 | xm-i386-sv32.h: xm-i386.h | |
591 | tm-i386gas.h: tm-i386.h | |
592 | xm-sun4os4.h: xm-sparc.h | |
593 | tm-sun4os4.h: tm-sparc.h | |
594 | xm-vaxult.h: xm-vax.h | |
595 | xm-vaxbsd.h: xm-vax.h | |
596 | ||
2531303c | 597 | kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} |
33cf356a SG |
598 | rm -f init.c |
599 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c | |
600 | $(CC) $(LDFLAGS) -c init.c $(CLIBS) | |
601 | ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ | |
602 | -lc $(CLIBS) | |
603 | ||
8d57a263 JK |
604 | # Put the proper machine-specific files first, so M-. on a machine |
605 | # specific routine gets the one for the correct machine. | |
db7c818b | 606 | # The xyzzy stuff below deals with empty DEPFILES |
2531303c | 607 | TAGS: ${TAGFILES} |
24c2857c JK |
608 | etags `find ${srcdir}/config -name $(TM_FILE) -print` \ |
609 | `find ${srcdir}/config -name ${XM_FILE} -print` \ | |
610 | `find ${srcdir}/config -name ${NAT_FILE} -print` \ | |
db7c818b JK |
611 | `for i in yzzy ${DEPFILES}; do \ |
612 | if [ x$$i != xyzzy ]; then \ | |
613 | echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \ | |
614 | fi; \ | |
615 | done` \ | |
24c2857c | 616 | ${TAGFILES} |
33cf356a SG |
617 | tags: TAGS |
618 | ||
619 | # Making distributions of GDB and friends. | |
620 | ||
33cf356a SG |
621 | # Make a tar file containing the GDB directory of the distribution. |
622 | gdb.tar.Z: force_update | |
623 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist | |
624 | $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z | |
625 | ||
2531303c FF |
626 | # Make a directory `proto-gdb.dir' that contains an image of the GDB |
627 | # directory of the distribution, built up with symlinks. Note that this | |
628 | # make target is not directly referenced by any other rules in this makefile, | |
629 | # it is referenced by the makefile in the parent directory. | |
630 | make-proto-gdb.dir: force_update | |
631 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist | |
632 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 | |
633 | ||
634 | # Set up the GDB source directory for distribution, by building all files that | |
635 | # are products of other files. | |
636 | setup-to-dist: update-depend force_update | |
637 | ../configure none | |
638 | (cd doc; $(MAKE) $(MFLAGS) GDBvn.texi) | |
639 | $(MAKE) $(MFLAGS) gdb.info | |
640 | $(MAKE) $(MFLAGS) refcard.ps | |
22473f72 JG |
641 | |
642 | # Update the "depend" and "alldeps.mak" files in a source directory. | |
643 | # We update alldeps.mak first, since it is used to generate the list | |
644 | # of files to be checked for dependencies. | |
645 | update-depend: update-alldeps force_update | |
b3d4dd73 | 646 | ../configure none -norecursion |
33cf356a SG |
647 | rm -f depend |
648 | $(MAKE) $(MFLAGS) depend | |
22473f72 | 649 | |
2531303c FF |
650 | # Update the "alldeps.mak" file in a source directory. |
651 | update-alldeps: force_update | |
652 | ../configure none -norecursion | |
653 | rm -f alldeps.mak | |
654 | $(MAKE) $(MFLAGS) alldeps.mak | |
33cf356a SG |
655 | |
656 | # Build a tar file from a proto-gdb.dir. | |
657 | gdb-$(VERSION).tar.Z: force_update | |
658 | rm -f gdb.tar gdb-$(VERSION).tar.Z | |
2531303c | 659 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 |
33cf356a SG |
660 | ln -s proto-gdb.dir $(DIST) |
661 | tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z | |
662 | rm -rf $(DIST) proto-gdb.dir | |
663 | ||
664 | # Build a proto-gdb.dir after GDB has been set up for distribution. | |
665 | # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile | |
666 | # built in the setup-to-dist process, since it defines things like ALLCONFIG | |
667 | # and ALLDEPFILES, that we need. | |
668 | make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info | |
669 | rm -rf proto-gdb.dir | |
670 | mkdir proto-gdb.dir | |
2531303c FF |
671 | rootme=`pwd`/ ; export rootme ; \ |
672 | for i in `echo ${TARDIRS}`; do \ | |
673 | (cd proto-gdb.dir ; \ | |
674 | mkdir -p $$i; \ | |
675 | cd $$i; \ | |
676 | ln -s $${rootme}/$$i/* .; \ | |
677 | rm -rf SCCS CVS CVS.adm RCS config.status; \ | |
678 | if test -f Makefile.in; then rm Makefile; else true; fi;); \ | |
679 | done ; \ | |
680 | for i in `echo ${TARFILES}`; do \ | |
681 | (cd proto-gdb.dir ; \ | |
682 | dir=`dirname $$i`; \ | |
683 | if test -d $$dir; then true; else mkdir -p $$dir; fi; \ | |
684 | ln -s $${rootme}/$$i $$i;); \ | |
685 | done | |
33cf356a SG |
686 | chmod og=u `find . -print` |
687 | ||
97e72c06 FF |
688 | # Build a proto-testsuite.dir. |
689 | make-proto-testsuite.dir: force_update | |
690 | rm -rf proto-testsuite.dir | |
691 | mkdir proto-testsuite.dir | |
692 | rootme=`pwd`/ ; export rootme ; \ | |
693 | for i in `find testsuite -type f -print`; do \ | |
694 | (cd proto-testsuite.dir ; \ | |
695 | dir=`dirname $$i`; \ | |
696 | if test -d $$dir; then true; else mkdir -p $$dir; fi; \ | |
697 | ln -s $${rootme}/$$i $$i;); \ | |
698 | done | |
699 | find proto-testsuite.dir -name Makefile -exec rm {} \; | |
700 | find proto-testsuite.dir -name config.status -exec rm {} \; | |
701 | ||
33cf356a | 702 | clean: |
4e772f44 | 703 | @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
704 | rm -f *.o ${ADD_FILES} *~ |
705 | rm -f init.c version.c | |
2531303c | 706 | rm -f gdb core make.log |
33cf356a | 707 | rm -f gdb[0-9] |
33cf356a | 708 | |
e58de8a2 | 709 | distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
4e772f44 | 710 | @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do |
33cf356a SG |
711 | rm -f tm.h xm.h config.status |
712 | rm -f y.output yacc.acts yacc.tmp | |
713 | rm -f ${TESTS} Makefile depend | |
33cf356a SG |
714 | |
715 | realclean: clean | |
4e772f44 | 716 | @$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do |
e58de8a2 | 717 | rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
33cf356a SG |
718 | rm -f tm.h xm.h config.status |
719 | rm -f Makefile depend | |
33cf356a SG |
720 | |
721 | STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb | |
722 | ||
723 | subdir_do: force | |
724 | @for i in $(DODIRS); do \ | |
725 | if [ -d ./$$i ] ; then \ | |
726 | if (cd ./$$i; \ | |
ef131e13 | 727 | $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ |
33cf356a SG |
728 | else exit 1 ; fi ; \ |
729 | else true ; fi ; \ | |
730 | done | |
d941d8c3 | 731 | |
33cf356a SG |
732 | Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) |
733 | $(SHELL) ./config.status | |
d941d8c3 | 734 | |
33cf356a | 735 | force: |
d941d8c3 | 736 | |
33cf356a SG |
737 | # Documentation! |
738 | # GDB QUICK REFERENCE (TeX dvi file, CM fonts) | |
2b21d8aa | 739 | refcard.dvi: |
ef131e13 | 740 | ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) ) |
33cf356a | 741 | mv ./doc/refcard.dvi . |
d941d8c3 | 742 | |
33cf356a | 743 | # GDB QUICK REFERENCE (PostScript output, common PS fonts) |
2b21d8aa | 744 | refcard.ps: |
ef131e13 | 745 | ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) ) |
33cf356a | 746 | mv ./doc/refcard.ps . |
d941d8c3 | 747 | |
33cf356a | 748 | # GDB MANUAL: TeX dvi file |
259d1dea | 749 | gdb.dvi: |
2b21d8aa | 750 | ( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) ) |
33cf356a | 751 | mv ./doc/gdb.dvi . |
d941d8c3 | 752 | |
33cf356a | 753 | # GDB MANUAL: info file |
259d1dea | 754 | gdb.info: |
24b88ae8 | 755 | ( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) ) |
33cf356a | 756 | mv ./doc/gdb.info* . |
d941d8c3 | 757 | |
33cf356a SG |
758 | # Make copying.c from COPYING |
759 | copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk | |
760 | awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c | |
d941d8c3 | 761 | |
33cf356a SG |
762 | version.c: Makefile |
763 | echo 'char *version = "$(VERSION)";' >version.c | |
d941d8c3 | 764 | |
33cf356a SG |
765 | # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist |
766 | # in srcdir, then compiled in target dir to c-exp.tab.o. | |
f4ed8840 JG |
767 | # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y |
768 | # (some "makes" rewrite the VPATH into command arguments if they match deps). | |
9aa44833 SG |
769 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
770 | # else. | |
33cf356a | 771 | c-exp.tab.o: c-exp.tab.c |
f4ed8840 | 772 | c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in |
33cf356a | 773 | @echo 'Expect 4 shift/reduce conflicts.' |
3717e95b | 774 | ${YACC} ${YFLAGS} $(srcdir)/c-exp.y |
9aa44833 SG |
775 | -sed -e '/extern.*malloc/d' \ |
776 | -e '/extern.*realloc/d' \ | |
777 | -e '/extern.*free/d' \ | |
e58de8a2 | 778 | -e '/include.*malloc.h/d' \ |
e35843d4 FF |
779 | -e 's/malloc/xmalloc/g' \ |
780 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 781 | < y.tab.c > ././c-exp.tab.c |
9aa44833 | 782 | -rm y.tab.c |
d941d8c3 | 783 | |
e58de8a2 FF |
784 | # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist |
785 | # in srcdir, then compiled in target dir to ch-exp.tab.o. | |
786 | # Remove bogus decls for malloc/realloc/free which conflict with everything | |
787 | # else. | |
788 | ch-exp.tab.o: ch-exp.tab.c | |
f4ed8840 | 789 | ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in |
3717e95b | 790 | ${YACC} ${YFLAGS} $(srcdir)/ch-exp.y |
e58de8a2 FF |
791 | -sed -e '/extern.*malloc/d' \ |
792 | -e '/extern.*realloc/d' \ | |
793 | -e '/extern.*free/d' \ | |
794 | -e '/include.*malloc.h/d' \ | |
795 | -e 's/malloc/xmalloc/g' \ | |
796 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 797 | < y.tab.c > ././ch-exp.tab.c |
e58de8a2 FF |
798 | -rm y.tab.c |
799 | ||
33cf356a SG |
800 | # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist |
801 | # in srcdir, then compiled in target dir to m2-exp.tab.o. | |
e58de8a2 FF |
802 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
803 | # else. | |
33cf356a | 804 | m2-exp.tab.o: m2-exp.tab.c |
f4ed8840 | 805 | m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in |
3717e95b | 806 | ${YACC} ${YFLAGS} $(srcdir)/m2-exp.y |
9aa44833 SG |
807 | -sed -e '/extern.*malloc/d' \ |
808 | -e '/extern.*realloc/d' \ | |
809 | -e '/extern.*free/d' \ | |
e58de8a2 | 810 | -e '/include.*malloc.h/d' \ |
e35843d4 FF |
811 | -e 's/malloc/xmalloc/g' \ |
812 | -e 's/realloc/xrealloc/g' \ | |
f4ed8840 | 813 | < y.tab.c > ././m2-exp.tab.c |
9aa44833 | 814 | -rm y.tab.c |
d941d8c3 | 815 | |
a679650f FF |
816 | |
817 | main.o: ${srcdir}/main.c | |
818 | ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $< | |
819 | ||
33cf356a SG |
820 | # The symbol-file readers have dependencies on BFD header files. |
821 | dbxread.o: ${srcdir}/dbxread.c | |
822 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c | |
d941d8c3 | 823 | |
33cf356a SG |
824 | coffread.o: ${srcdir}/coffread.c |
825 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c | |
d941d8c3 | 826 | |
33cf356a SG |
827 | mipsread.o: ${srcdir}/mipsread.c |
828 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c | |
d941d8c3 | 829 | |
33cf356a SG |
830 | elfread.o: ${srcdir}/elfread.c |
831 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c | |
d941d8c3 | 832 | |
33cf356a SG |
833 | dwarfread.o: ${srcdir}/dwarfread.c |
834 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c | |
d941d8c3 | 835 | |
a679650f FF |
836 | stabsread.o: ${srcdir}/stabsread.c |
837 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c | |
838 | ||
f4ed8840 | 839 | # Used on RS/6000 native |
33cf356a SG |
840 | xcoffread.o: ${srcdir}/xcoffread.c |
841 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c | |
d941d8c3 | 842 | |
33cf356a SG |
843 | xcoffexec.o: ${srcdir}/xcoffexec.c |
844 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c | |
d941d8c3 | 845 | |
f4ed8840 | 846 | # Used on HP-PA native |
2fcc38b8 FF |
847 | paread.o: ${srcdir}/paread.c |
848 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c | |
849 | ||
33cf356a | 850 | # Drag in the files that are in another directory. |
d941d8c3 | 851 | |
33cf356a SG |
852 | xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c |
853 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c | |
d941d8c3 | 854 | |
33cf356a SG |
855 | xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c |
856 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c | |
d941d8c3 | 857 | |
33cf356a SG |
858 | xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c |
859 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c | |
d941d8c3 | 860 | |
33cf356a | 861 | nindy.o: ${srcdir}/nindy-share/nindy.c |
6a1f93f6 KR |
862 | ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \ |
863 | ${srcdir}/nindy-share/nindy.c | |
d941d8c3 | 864 | |
33cf356a SG |
865 | Onindy.o: ${srcdir}/nindy-share/Onindy.c |
866 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c | |
d941d8c3 | 867 | |
33cf356a SG |
868 | ttybreak.o: ${srcdir}/nindy-share/ttybreak.c |
869 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c | |
d941d8c3 | 870 | |
33cf356a SG |
871 | ttyflush.o: ${srcdir}/nindy-share/ttyflush.c |
872 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c | |
d941d8c3 | 873 | |
6881fb6d SG |
874 | udr.o: ${srcdir}/29k-share/udi/udr.c |
875 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c | |
876 | ||
877 | udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c | |
878 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c | |
879 | ||
33cf356a SG |
880 | lint: $(LINTFILES) |
881 | $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ | |
882 | `echo ${DEPFILES} | sed 's/\.o /\.c /g' | |
d941d8c3 | 883 | |
33cf356a SG |
884 | gdb.cxref: $(SFILES) |
885 | cxref -I. $(SFILES) >gdb.cxref | |
d941d8c3 | 886 | |
33cf356a | 887 | force_update: |
d941d8c3 | 888 | |
33cf356a SG |
889 | # GNU Make has an annoying habit of putting *all* the Makefile variables |
890 | # into the environment, unless you include this target as a circumvention. | |
891 | # Rumor is that this will be fixed (and this target can be removed) | |
892 | # in GNU Make 4.0. | |
893 | .NOEXPORT: | |
d941d8c3 | 894 | |
aecc5459 ILT |
895 | # GNU Make 3.63 has a different problem: it keeps tacking command line |
896 | # overrides onto the definition of $(MAKE). This variable setting | |
897 | # will remove them. | |
898 | MAKEOVERRIDES= | |
899 | ||
58bb1e76 ILT |
900 | ## This is ugly, but I don't want GNU make to put these variables in |
901 | ## the environment. Older makes will see this as a set of targets | |
902 | ## with no dependencies and no actions. | |
903 | unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET : | |
58bb1e76 | 904 | |
33cf356a SG |
905 | # This is the end of "Makefile.in". When built into "Makefile" |
906 | # by the configure script, two things are added below this point: | |
97e72c06 | 907 | # alldeps.mak -- definitions of all files that are used in |
33cf356a SG |
908 | # host- or target-dependent configurations |
909 | # depend -- what .o files depend on what .c and .h files, | |
910 | # for all configurations. |