Commit | Line | Data |
---|---|---|
c906108c SS |
1 | What has changed in GDB? |
2 | (Organized release by release) | |
3 | ||
faae5abe AC |
4 | *** Changes since GDB 6.1: |
5 | ||
6f606e1c MK |
6 | * New native configurations |
7 | ||
8 | NetBSD/vax vax-*-netbsd* | |
9f076e7a | 9 | OpenBSD/vax vax-*-openbsd* |
6f606e1c | 10 | |
3c7012f5 AC |
11 | * REMOVED configurations and files |
12 | ||
13 | Sun 3, running SunOS 3 m68*-*-sunos3* | |
14 | Sun 3, running SunOS 4 m68*-*-sunos4* | |
15 | Sun 2, running SunOS 3 m68000-*-sunos3* | |
16 | Sun 2, running SunOS 4 m68000-*-sunos4* | |
17 | Motorola 680x0 running LynxOS m68*-*-lynxos* | |
18 | AT&T 3b1/Unix pc m68*-att-* | |
19 | Bull DPX2 (68k, System V release 3) m68*-bull-sysv* | |
20 | decstation mips-dec-* mips-little-* | |
21 | riscos mips-*-riscos* mips-*-sysv* | |
22 | sonymips mips-sony-* | |
23 | sysv mips*-*-sysv4* (IRIX 5/6 not included) | |
24 | ||
faae5abe | 25 | *** Changes in GDB 6.1: |
f2c06f52 | 26 | |
9175c9a3 MC |
27 | * Removed --with-mmalloc |
28 | ||
29 | Support for the mmalloc memory manager has been removed, as it | |
30 | conflicted with the internal gdb byte cache. | |
31 | ||
3cc87ec0 MK |
32 | * Changes in AMD64 configurations |
33 | ||
34 | The AMD64 target now includes the %cs and %ss registers. As a result | |
35 | the AMD64 remote protocol has changed; this affects the floating-point | |
36 | and SSE registers. If you rely on those registers for your debugging, | |
37 | you should upgrade gdbserver on the remote side. | |
38 | ||
f0424ef6 MK |
39 | * Revised SPARC target |
40 | ||
41 | The SPARC target has been completely revised, incorporating the | |
42 | FreeBSD/sparc64 support that was added for GDB 6.0. As a result | |
03cebad2 MK |
43 | support for LynxOS and SunOS 4 has been dropped. Calling functions |
44 | from within GDB on operating systems with a non-executable stack | |
45 | (Solaris, OpenBSD) now works. | |
f0424ef6 | 46 | |
59659be2 ILT |
47 | * New C++ demangler |
48 | ||
49 | GDB has a new C++ demangler which does a better job on the mangled | |
50 | names generated by current versions of g++. It also runs faster, so | |
51 | with this and other changes gdb should now start faster on large C++ | |
52 | programs. | |
53 | ||
9e08b29b DJ |
54 | * DWARF 2 Location Expressions |
55 | ||
56 | GDB support for location expressions has been extended to support function | |
57 | arguments and frame bases. Older versions of GDB could crash when they | |
58 | encountered these. | |
59 | ||
8dfe8985 DC |
60 | * C++ nested types and namespaces |
61 | ||
62 | GDB's support for nested types and namespaces in C++ has been | |
63 | improved, especially if you use the DWARF 2 debugging format. (This | |
64 | is the default for recent versions of GCC on most platforms.) | |
65 | Specifically, if you have a class "Inner" defined within a class or | |
66 | namespace "Outer", then GDB realizes that the class's name is | |
67 | "Outer::Inner", not simply "Inner". This should greatly reduce the | |
68 | frequency of complaints about not finding RTTI symbols. In addition, | |
69 | if you are stopped at inside of a function defined within a namespace, | |
70 | GDB modifies its name lookup accordingly. | |
71 | ||
cced5e27 MK |
72 | * New native configurations |
73 | ||
74 | NetBSD/amd64 x86_64-*-netbsd* | |
27d1e716 | 75 | OpenBSD/amd64 x86_64-*-openbsd* |
2031c21a | 76 | OpenBSD/alpha alpha*-*-openbsd* |
f2cab569 MK |
77 | OpenBSD/sparc sparc-*-openbsd* |
78 | OpenBSD/sparc64 sparc64-*-openbsd* | |
cced5e27 | 79 | |
b4b4b794 KI |
80 | * New debugging protocols |
81 | ||
82 | M32R with SDI protocol m32r-*-elf* | |
83 | ||
7989c619 AC |
84 | * "set prompt-escape-char" command deleted. |
85 | ||
86 | The command "set prompt-escape-char" has been deleted. This command, | |
87 | and its very obscure effet on GDB's prompt, was never documented, | |
88 | tested, nor mentioned in the NEWS file. | |
89 | ||
5994185b AC |
90 | * OBSOLETE configurations and files |
91 | ||
92 | Configurations that have been declared obsolete in this release have | |
93 | been commented out. Unless there is activity to revive these | |
94 | configurations, the next release of GDB will have their sources | |
95 | permanently REMOVED. | |
96 | ||
97 | Sun 3, running SunOS 3 m68*-*-sunos3* | |
98 | Sun 3, running SunOS 4 m68*-*-sunos4* | |
99 | Sun 2, running SunOS 3 m68000-*-sunos3* | |
100 | Sun 2, running SunOS 4 m68000-*-sunos4* | |
101 | Motorola 680x0 running LynxOS m68*-*-lynxos* | |
102 | AT&T 3b1/Unix pc m68*-att-* | |
103 | Bull DPX2 (68k, System V release 3) m68*-bull-sysv* | |
0748d941 AC |
104 | decstation mips-dec-* mips-little-* |
105 | riscos mips-*-riscos* mips-*-sysv* | |
106 | sonymips mips-sony-* | |
107 | sysv mips*-*-sysv4* (IRIX 5/6 not included) | |
5994185b | 108 | |
0ddabb4c AC |
109 | * REMOVED configurations and files |
110 | ||
111 | SGI Irix-4.x mips-sgi-irix4 or iris4 | |
112 | SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris | |
4a8269c0 AC |
113 | Z8000 simulator z8k-zilog-none or z8ksim |
114 | Matsushita MN10200 w/simulator mn10200-*-* | |
115 | H8/500 simulator h8500-hitachi-hms or h8500hms | |
116 | HP/PA running BSD hppa*-*-bsd* | |
117 | HP/PA running OSF/1 hppa*-*-osf* | |
118 | HP/PA Pro target hppa*-*-pro* | |
119 | PMAX (MIPS) running Mach 3.0 mips*-*-mach3* | |
cf7c5c23 | 120 | 386BSD i[3456]86-*-bsd* |
4a8269c0 AC |
121 | Sequent family i[3456]86-sequent-sysv4* |
122 | i[3456]86-sequent-sysv* | |
123 | i[3456]86-sequent-bsd* | |
f0424ef6 MK |
124 | SPARC running LynxOS sparc-*-lynxos* |
125 | SPARC running SunOS 4 sparc-*-sunos4* | |
4a8269c0 AC |
126 | Tsqware Sparclet sparclet-*-* |
127 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
0ddabb4c | 128 | |
c7f1390e DJ |
129 | *** Changes in GDB 6.0: |
130 | ||
1fe43d45 AC |
131 | * Objective-C |
132 | ||
133 | Support for debugging the Objective-C programming language has been | |
134 | integrated into GDB. | |
135 | ||
e6beb428 AC |
136 | * New backtrace mechanism (includes DWARF 2 Call Frame Information). |
137 | ||
138 | DWARF 2's Call Frame Information makes available compiler generated | |
139 | information that more exactly describes the program's run-time stack. | |
140 | By using this information, GDB is able to provide more robust stack | |
141 | backtraces. | |
142 | ||
143 | The i386, amd64 (nee, x86-64), Alpha, m68hc11, ia64, and m32r targets | |
144 | have been updated to use a new backtrace mechanism which includes | |
145 | DWARF 2 CFI support. | |
146 | ||
147 | * Hosted file I/O. | |
148 | ||
149 | GDB's remote protocol has been extended to include support for hosted | |
150 | file I/O (where the remote target uses GDB's file system). See GDB's | |
151 | remote protocol documentation for details. | |
152 | ||
153 | * All targets using the new architecture framework. | |
154 | ||
155 | All of GDB's targets have been updated to use the new internal | |
156 | architecture framework. The way is now open for future GDB releases | |
157 | to include cross-architecture native debugging support (i386 on amd64, | |
158 | ppc32 on ppc64). | |
159 | ||
160 | * GNU/Linux's Thread Local Storage (TLS) | |
161 | ||
162 | GDB now includes support for for the GNU/Linux implementation of | |
163 | per-thread variables. | |
164 | ||
165 | * GNU/Linux's Native POSIX Thread Library (NPTL) | |
166 | ||
167 | GDB's thread code has been updated to work with either the new | |
168 | GNU/Linux NPTL thread library or the older "LinuxThreads" library. | |
169 | ||
170 | * Separate debug info. | |
171 | ||
172 | GDB, in conjunction with BINUTILS, now supports a mechanism for | |
173 | automatically loading debug information from a separate file. Instead | |
174 | of shipping full debug and non-debug versions of system libraries, | |
175 | system integrators can now instead ship just the stripped libraries | |
176 | and optional debug files. | |
177 | ||
178 | * DWARF 2 Location Expressions | |
179 | ||
180 | DWARF 2 Location Expressions allow the compiler to more completely | |
181 | describe the location of variables (even in optimized code) to the | |
182 | debugger. | |
183 | ||
184 | GDB now includes preliminary support for location expressions (support | |
185 | for DW_OP_piece is still missing). | |
186 | ||
187 | * Java | |
188 | ||
189 | A number of long standing bugs that caused GDB to die while starting a | |
190 | Java application have been fixed. GDB's Java support is now | |
191 | considered "useable". | |
192 | ||
85f8f974 DJ |
193 | * GNU/Linux support for fork, vfork, and exec. |
194 | ||
195 | The "catch fork", "catch exec", "catch vfork", and "set follow-fork-mode" | |
196 | commands are now implemented for GNU/Linux. They require a 2.5.x or later | |
197 | kernel. | |
198 | ||
0fac0b41 DJ |
199 | * GDB supports logging output to a file |
200 | ||
201 | There are two new commands, "set logging" and "show logging", which can be | |
202 | used to capture GDB's output to a file. | |
f2c06f52 | 203 | |
6ad8ae5c DJ |
204 | * The meaning of "detach" has changed for gdbserver |
205 | ||
206 | The "detach" command will now resume the application, as documented. To | |
207 | disconnect from gdbserver and leave it stopped, use the new "disconnect" | |
208 | command. | |
209 | ||
e286caf2 | 210 | * d10v, m68hc11 `regs' command deprecated |
5f601589 AC |
211 | |
212 | The `info registers' command has been updated so that it displays the | |
213 | registers using a format identical to the old `regs' command. | |
214 | ||
d28f9cdf DJ |
215 | * Profiling support |
216 | ||
217 | A new command, "maint set profile on/off", has been added. This command can | |
218 | be used to enable or disable profiling while running GDB, to profile a | |
219 | session or a set of commands. In addition there is a new configure switch, | |
220 | "--enable-profiling", which will cause GDB to be compiled with profiling | |
221 | data, for more informative profiling results. | |
222 | ||
da0f9dcd AC |
223 | * Default MI syntax changed to "mi2". |
224 | ||
225 | The default MI (machine interface) syntax, enabled by the command line | |
226 | option "-i=mi", has been changed to "mi2". The previous MI syntax, | |
b68767c1 | 227 | "mi1", can be enabled by specifying the option "-i=mi1". |
da0f9dcd AC |
228 | |
229 | Support for the original "mi0" syntax (included in GDB 5.0) has been | |
230 | removed. | |
231 | ||
fb9b6b35 JJ |
232 | Fix for gdb/192: removed extraneous space when displaying frame level. |
233 | Fix for gdb/672: update changelist is now output in mi list format. | |
234 | Fix for gdb/702: a -var-assign that updates the value now shows up | |
235 | in a subsequent -var-update. | |
236 | ||
954a4db8 MK |
237 | * New native configurations. |
238 | ||
239 | FreeBSD/amd64 x86_64-*-freebsd* | |
240 | ||
6760f9e6 JB |
241 | * Multi-arched targets. |
242 | ||
b4263afa | 243 | HP/PA HPUX11 hppa*-*-hpux* |
85a453d5 | 244 | Renesas M32R/D w/simulator m32r-*-elf* |
6760f9e6 | 245 | |
1b831c93 AC |
246 | * OBSOLETE configurations and files |
247 | ||
248 | Configurations that have been declared obsolete in this release have | |
249 | been commented out. Unless there is activity to revive these | |
250 | configurations, the next release of GDB will have their sources | |
251 | permanently REMOVED. | |
252 | ||
8b0e5691 | 253 | Z8000 simulator z8k-zilog-none or z8ksim |
67f16606 | 254 | Matsushita MN10200 w/simulator mn10200-*-* |
fd2299bd | 255 | H8/500 simulator h8500-hitachi-hms or h8500hms |
56056df7 AC |
256 | HP/PA running BSD hppa*-*-bsd* |
257 | HP/PA running OSF/1 hppa*-*-osf* | |
258 | HP/PA Pro target hppa*-*-pro* | |
78c43945 | 259 | PMAX (MIPS) running Mach 3.0 mips*-*-mach3* |
2fbce691 AC |
260 | Sequent family i[3456]86-sequent-sysv4* |
261 | i[3456]86-sequent-sysv* | |
262 | i[3456]86-sequent-bsd* | |
f81824a9 AC |
263 | Tsqware Sparclet sparclet-*-* |
264 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
fd2299bd | 265 | |
5835abe7 NC |
266 | * REMOVED configurations and files |
267 | ||
268 | V850EA ISA | |
1b831c93 AC |
269 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
270 | IBM AIX PS/2 i[3456]86-*-aix | |
271 | i386 running Mach 3.0 i[3456]86-*-mach3* | |
272 | i386 running Mach i[3456]86-*-mach* | |
273 | i386 running OSF/1 i[3456]86-*osf1mk* | |
274 | HP/Apollo 68k Family m68*-apollo*-sysv*, | |
275 | m68*-apollo*-bsd*, | |
276 | m68*-hp-bsd*, m68*-hp-hpux* | |
277 | Argonaut Risc Chip (ARC) arc-*-* | |
278 | Mitsubishi D30V d30v-*-* | |
279 | Fujitsu FR30 fr30-*-elf* | |
280 | OS/9000 i[34]86-*-os9k | |
281 | I960 with MON960 i960-*-coff | |
5835abe7 | 282 | |
a094c6fb AC |
283 | * MIPS $fp behavior changed |
284 | ||
285 | The convenience variable $fp, for the MIPS, now consistently returns | |
286 | the address of the current frame's base. Previously, depending on the | |
287 | context, $fp could refer to either $sp or the current frame's base | |
288 | address. See ``8.10 Registers'' in the manual ``Debugging with GDB: | |
289 | The GNU Source-Level Debugger''. | |
290 | ||
299ffc64 | 291 | *** Changes in GDB 5.3: |
37057839 | 292 | |
46248966 AC |
293 | * GNU/Linux shared library multi-threaded performance improved. |
294 | ||
295 | When debugging a multi-threaded application on GNU/Linux, GDB now uses | |
296 | `/proc', in preference to `ptrace' for memory reads. This may result | |
297 | in an improvement in the start-up time of multi-threaded, shared | |
298 | library applications when run under GDB. One GDB user writes: ``loads | |
299 | shared libs like mad''. | |
300 | ||
b9d14705 | 301 | * ``gdbserver'' now supports multi-threaded applications on some targets |
6da02953 | 302 | |
b9d14705 DJ |
303 | Support for debugging multi-threaded applications which use |
304 | the GNU/Linux LinuxThreads package has been added for | |
305 | arm*-*-linux*-gnu*, i[3456]86-*-linux*-gnu*, mips*-*-linux*-gnu*, | |
306 | powerpc*-*-linux*-gnu*, and sh*-*-linux*-gnu*. | |
6da02953 | 307 | |
e0e9281e JB |
308 | * GDB now supports C/C++ preprocessor macros. |
309 | ||
310 | GDB now expands preprocessor macro invocations in C/C++ expressions, | |
311 | and provides various commands for showing macro definitions and how | |
312 | they expand. | |
313 | ||
dd73b9bb AC |
314 | The new command `macro expand EXPRESSION' expands any macro |
315 | invocations in expression, and shows the result. | |
316 | ||
317 | The new command `show macro MACRO-NAME' shows the definition of the | |
318 | macro named MACRO-NAME, and where it was defined. | |
319 | ||
e0e9281e JB |
320 | Most compilers don't include information about macros in the debugging |
321 | information by default. In GCC 3.1, for example, you need to compile | |
322 | your program with the options `-gdwarf-2 -g3'. If the macro | |
323 | information is present in the executable, GDB will read it. | |
324 | ||
2250ee0c CV |
325 | * Multi-arched targets. |
326 | ||
6e3ba3b8 JT |
327 | DEC Alpha (partial) alpha*-*-* |
328 | DEC VAX (partial) vax-*-* | |
2250ee0c | 329 | NEC V850 v850-*-* |
6e3ba3b8 | 330 | National Semiconductor NS32000 (partial) ns32k-*-* |
a1789893 GS |
331 | Motorola 68000 (partial) m68k-*-* |
332 | Motorola MCORE mcore-*-* | |
2250ee0c | 333 | |
cd9bfe15 | 334 | * New targets. |
e33ce519 | 335 | |
456f8b9d DB |
336 | Fujitsu FRV architecture added by Red Hat frv*-*-* |
337 | ||
e33ce519 | 338 | |
da8ca43d JT |
339 | * New native configurations |
340 | ||
341 | Alpha NetBSD alpha*-*-netbsd* | |
029923d4 | 342 | SH NetBSD sh*-*-netbsdelf* |
45888261 | 343 | MIPS NetBSD mips*-*-netbsd* |
9ce5c36a | 344 | UltraSPARC NetBSD sparc64-*-netbsd* |
da8ca43d | 345 | |
cd9bfe15 AC |
346 | * OBSOLETE configurations and files |
347 | ||
348 | Configurations that have been declared obsolete in this release have | |
349 | been commented out. Unless there is activity to revive these | |
350 | configurations, the next release of GDB will have their sources | |
351 | permanently REMOVED. | |
352 | ||
92eb23c5 | 353 | Mitsubishi D30V d30v-*-* |
a99a9e1b | 354 | OS/9000 i[34]86-*-os9k |
1c7cc583 | 355 | IBM AIX PS/2 i[3456]86-*-aix |
7a3085c1 | 356 | Fujitsu FR30 fr30-*-elf* |
7fb623f7 | 357 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
eb4c54a2 | 358 | Argonaut Risc Chip (ARC) arc-*-* |
d8ee244c MK |
359 | i386 running Mach 3.0 i[3456]86-*-mach3* |
360 | i386 running Mach i[3456]86-*-mach* | |
361 | i386 running OSF/1 i[3456]86-*osf1mk* | |
822e978b AC |
362 | HP/Apollo 68k Family m68*-apollo*-sysv*, |
363 | m68*-apollo*-bsd*, | |
364 | m68*-hp-bsd*, m68*-hp-hpux* | |
4d210288 | 365 | I960 with MON960 i960-*-coff |
92eb23c5 | 366 | |
db034ac5 AC |
367 | * OBSOLETE languages |
368 | ||
369 | CHILL, a Pascal like language used by telecommunications companies. | |
370 | ||
cd9bfe15 AC |
371 | * REMOVED configurations and files |
372 | ||
373 | AMD 29k family via UDI a29k-amd-udi, udi29k | |
374 | A29K VxWorks a29k-*-vxworks | |
375 | AMD 29000 embedded, using EBMON a29k-none-none | |
376 | AMD 29000 embedded with COFF a29k-none-coff | |
377 | AMD 29000 embedded with a.out a29k-none-aout | |
378 | ||
379 | testsuite/gdb.hp/gdb.threads-hp/ directory | |
380 | ||
20f01a46 DH |
381 | * New command "set max-user-call-depth <nnn>" |
382 | ||
383 | This command allows the user to limit the call depth of user-defined | |
384 | commands. The default is 1024. | |
385 | ||
a5941fbf MK |
386 | * Changes in FreeBSD/i386 native debugging. |
387 | ||
388 | Support for the "generate-core-file" has been added. | |
389 | ||
89743e04 MS |
390 | * New commands "dump", "append", and "restore". |
391 | ||
392 | These commands allow data to be copied from target memory | |
393 | to a bfd-format or binary file (dump and append), and back | |
394 | from a file into memory (restore). | |
37057839 | 395 | |
9fb14e79 JB |
396 | * Improved "next/step" support on multi-processor Alpha Tru64. |
397 | ||
398 | The previous single-step mechanism could cause unpredictable problems, | |
399 | including the random appearance of SIGSEGV or SIGTRAP signals. The use | |
400 | of a software single-step mechanism prevents this. | |
401 | ||
2037aebb AC |
402 | *** Changes in GDB 5.2.1: |
403 | ||
404 | * New targets. | |
405 | ||
406 | Atmel AVR avr*-*-* | |
407 | ||
408 | * Bug fixes | |
409 | ||
410 | gdb/182: gdb/323: gdb/237: On alpha, gdb was reporting: | |
411 | mdebugread.c:2443: gdb-internal-error: sect_index_data not initialized | |
412 | Fix, by Joel Brobecker imported from mainline. | |
413 | ||
414 | gdb/439: gdb/291: On some ELF object files, gdb was reporting: | |
415 | dwarf2read.c:1072: gdb-internal-error: sect_index_text not initialize | |
416 | Fix, by Fred Fish, imported from mainline. | |
417 | ||
418 | Dwarf2 .debug_frame & .eh_frame handler improved in many ways. | |
419 | Surprisingly enough, it works now. | |
420 | By Michal Ludvig, imported from mainline. | |
421 | ||
422 | i386 hardware watchpoint support: | |
423 | avoid misses on second run for some targets. | |
424 | By Pierre Muller, imported from mainline. | |
425 | ||
37057839 | 426 | *** Changes in GDB 5.2: |
eb7cedd9 | 427 | |
1a703748 MS |
428 | * New command "set trust-readonly-sections on[off]". |
429 | ||
430 | This command is a hint that tells gdb that read-only sections | |
431 | really are read-only (ie. that their contents will not change). | |
432 | In this mode, gdb will go to the object file rather than the | |
433 | target to read memory from read-only sections (such as ".text"). | |
434 | This can be a significant performance improvement on some | |
435 | (notably embedded) targets. | |
436 | ||
cefd4ef5 MS |
437 | * New command "generate-core-file" (or "gcore"). |
438 | ||
55241689 AC |
439 | This new gdb command allows the user to drop a core file of the child |
440 | process state at any time. So far it's been implemented only for | |
441 | GNU/Linux and Solaris, but should be relatively easily ported to other | |
442 | hosts. Argument is core file name (defaults to core.<pid>). | |
cefd4ef5 | 443 | |
352ed7b4 MS |
444 | * New command line option |
445 | ||
446 | GDB now accepts --pid or -p followed by a process id. | |
447 | ||
448 | * Change in command line behavior -- corefiles vs. process ids. | |
449 | ||
450 | There is a subtle behavior in the way in which GDB handles | |
451 | command line arguments. The first non-flag argument is always | |
452 | a program to debug, but the second non-flag argument may either | |
453 | be a corefile or a process id. Previously, GDB would attempt to | |
454 | open the second argument as a corefile, and if that failed, would | |
455 | issue a superfluous error message and then attempt to attach it as | |
456 | a process. Now, if the second argument begins with a non-digit, | |
457 | it will be treated as a corefile. If it begins with a digit, | |
458 | GDB will attempt to attach it as a process, and if no such process | |
459 | is found, will then attempt to open it as a corefile. | |
460 | ||
fe419ffc RE |
461 | * Changes in ARM configurations. |
462 | ||
463 | Multi-arch support is enabled for all ARM configurations. The ARM/NetBSD | |
464 | configuration is fully multi-arch. | |
465 | ||
eb7cedd9 MK |
466 | * New native configurations |
467 | ||
fe419ffc | 468 | ARM NetBSD arm*-*-netbsd* |
eb7cedd9 | 469 | x86 OpenBSD i[3456]86-*-openbsd* |
55241689 | 470 | AMD x86-64 running GNU/Linux x86_64-*-linux-* |
768f0842 | 471 | Sparc64 running FreeBSD sparc64-*-freebsd* |
eb7cedd9 | 472 | |
c9f63e6b CV |
473 | * New targets |
474 | ||
475 | Sanyo XStormy16 xstormy16-elf | |
476 | ||
9b4ff276 AC |
477 | * OBSOLETE configurations and files |
478 | ||
479 | Configurations that have been declared obsolete in this release have | |
480 | been commented out. Unless there is activity to revive these | |
481 | configurations, the next release of GDB will have their sources | |
482 | permanently REMOVED. | |
483 | ||
484 | AMD 29k family via UDI a29k-amd-udi, udi29k | |
485 | A29K VxWorks a29k-*-vxworks | |
486 | AMD 29000 embedded, using EBMON a29k-none-none | |
487 | AMD 29000 embedded with COFF a29k-none-coff | |
488 | AMD 29000 embedded with a.out a29k-none-aout | |
489 | ||
b4ceaee6 | 490 | testsuite/gdb.hp/gdb.threads-hp/ directory |
9b4ff276 | 491 | |
e2caac18 AC |
492 | * REMOVED configurations and files |
493 | ||
494 | TI TMS320C80 tic80-*-* | |
7bc65f05 | 495 | WDC 65816 w65-*-* |
7768dd6c AC |
496 | PowerPC Solaris powerpcle-*-solaris* |
497 | PowerPC Windows NT powerpcle-*-cygwin32 | |
498 | PowerPC Netware powerpc-*-netware* | |
5e734e1f | 499 | Harris/CXUX m88k m88*-harris-cxux* |
1406caf7 AC |
500 | Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
501 | ns32k-utek-sysv* ns32k-utek-* | |
7e24f0b1 | 502 | SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
9b567150 | 503 | Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
3680c638 AC |
504 | Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
505 | ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* | |
a752853e | 506 | Apple Macintosh (MPW) host and target N/A host, powerpc-*-macos* |
e2caac18 | 507 | |
c2a727fa TT |
508 | * Changes to command line processing |
509 | ||
510 | The new `--args' feature can be used to specify command-line arguments | |
511 | for the inferior from gdb's command line. | |
512 | ||
467d8519 TT |
513 | * Changes to key bindings |
514 | ||
515 | There is a new `operate-and-get-next' function bound to `C-o'. | |
516 | ||
7072a954 AC |
517 | *** Changes in GDB 5.1.1 |
518 | ||
519 | Fix compile problem on DJGPP. | |
520 | ||
521 | Fix a problem with floating-point registers on the i386 being | |
522 | corrupted. | |
523 | ||
524 | Fix to stop GDB crashing on .debug_str debug info. | |
525 | ||
526 | Numerous documentation fixes. | |
527 | ||
528 | Numerous testsuite fixes. | |
529 | ||
34f47bc4 | 530 | *** Changes in GDB 5.1: |
139760b7 MK |
531 | |
532 | * New native configurations | |
533 | ||
534 | Alpha FreeBSD alpha*-*-freebsd* | |
535 | x86 FreeBSD 3.x and 4.x i[3456]86*-freebsd[34]* | |
55241689 | 536 | MIPS GNU/Linux mips*-*-linux* |
e23194cb EZ |
537 | MIPS SGI Irix 6.x mips*-sgi-irix6* |
538 | ia64 AIX ia64-*-aix* | |
55241689 | 539 | s390 and s390x GNU/Linux {s390,s390x}-*-linux* |
139760b7 | 540 | |
bf64bfd6 AC |
541 | * New targets |
542 | ||
def90278 | 543 | Motorola 68HC11 and 68HC12 m68hc11-elf |
24be5c34 | 544 | CRIS cris-axis |
55241689 | 545 | UltraSparc running GNU/Linux sparc64-*-linux* |
def90278 | 546 | |
17e78a56 | 547 | * OBSOLETE configurations and files |
bf64bfd6 AC |
548 | |
549 | x86 FreeBSD before 2.2 i[3456]86*-freebsd{1,2.[01]}*, | |
9b9c068d | 550 | Harris/CXUX m88k m88*-harris-cxux* |
bb19ff3b AC |
551 | Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
552 | ns32k-utek-sysv* ns32k-utek-* | |
76f4ea53 AC |
553 | TI TMS320C80 tic80-*-* |
554 | WDC 65816 w65-*-* | |
4a1968f4 | 555 | Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
1b2b2c16 AC |
556 | PowerPC Solaris powerpcle-*-solaris* |
557 | PowerPC Windows NT powerpcle-*-cygwin32 | |
558 | PowerPC Netware powerpc-*-netware* | |
24f89b68 | 559 | SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
514e603d AC |
560 | Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
561 | ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* | |
d036b4d9 | 562 | Apple Macintosh (MPW) host N/A |
bf64bfd6 | 563 | |
17e78a56 AC |
564 | stuff.c (Program to stuff files into a specially prepared space in kdb) |
565 | kdb-start.c (Main loop for the standalone kernel debugger) | |
566 | ||
7fcca85b AC |
567 | Configurations that have been declared obsolete in this release have |
568 | been commented out. Unless there is activity to revive these | |
569 | configurations, the next release of GDB will have their sources | |
570 | permanently REMOVED. | |
571 | ||
a196c81c | 572 | * REMOVED configurations and files |
7fcca85b AC |
573 | |
574 | Altos 3068 m68*-altos-* | |
575 | Convex c1-*-*, c2-*-* | |
576 | Pyramid pyramid-*-* | |
577 | ARM RISCix arm-*-* (as host) | |
578 | Tahoe tahoe-*-* | |
a196c81c | 579 | ser-ocd.c *-*-* |
bf64bfd6 | 580 | |
6d6b80e5 | 581 | * GDB has been converted to ISO C. |
e23194cb | 582 | |
6d6b80e5 | 583 | GDB's source code has been converted to ISO C. In particular, the |
e23194cb EZ |
584 | sources are fully protoized, and rely on standard headers being |
585 | present. | |
586 | ||
bf64bfd6 AC |
587 | * Other news: |
588 | ||
e23194cb EZ |
589 | * "info symbol" works on platforms which use COFF, ECOFF, XCOFF, and NLM. |
590 | ||
591 | * The MI enabled by default. | |
592 | ||
593 | The new machine oriented interface (MI) introduced in GDB 5.0 has been | |
594 | revised and enabled by default. Packages which use GDB as a debugging | |
595 | engine behind a UI or another front end are encouraged to switch to | |
596 | using the GDB/MI interface, instead of the old annotations interface | |
597 | which is now deprecated. | |
598 | ||
599 | * Support for debugging Pascal programs. | |
600 | ||
601 | GDB now includes support for debugging Pascal programs. The following | |
602 | main features are supported: | |
603 | ||
604 | - Pascal-specific data types such as sets; | |
605 | ||
606 | - automatic recognition of Pascal sources based on file-name | |
607 | extension; | |
608 | ||
609 | - Pascal-style display of data types, variables, and functions; | |
610 | ||
611 | - a Pascal expression parser. | |
612 | ||
613 | However, some important features are not yet supported. | |
614 | ||
615 | - Pascal string operations are not supported at all; | |
616 | ||
617 | - there are some problems with boolean types; | |
618 | ||
619 | - Pascal type hexadecimal constants are not supported | |
620 | because they conflict with the internal variables format; | |
621 | ||
622 | - support for Pascal objects and classes is not full yet; | |
623 | ||
624 | - unlike Pascal, GDB is case-sensitive for symbol names. | |
625 | ||
626 | * Changes in completion. | |
627 | ||
628 | Commands such as `shell', `run' and `set args', which pass arguments | |
629 | to inferior programs, now complete on file names, similar to what | |
630 | users expect at the shell prompt. | |
631 | ||
632 | Commands which accept locations, such as `disassemble', `print', | |
633 | `breakpoint', `until', etc. now complete on filenames as well as | |
634 | program symbols. Thus, if you type "break foob TAB", and the source | |
635 | files linked into the programs include `foobar.c', that file name will | |
636 | be one of the candidates for completion. However, file names are not | |
637 | considered for completion after you typed a colon that delimits a file | |
638 | name from a name of a function in that file, as in "break foo.c:bar". | |
639 | ||
640 | `set demangle-style' completes on available demangling styles. | |
641 | ||
642 | * New platform-independent commands: | |
643 | ||
644 | It is now possible to define a post-hook for a command as well as a | |
645 | hook that runs before the command. For more details, see the | |
646 | documentation of `hookpost' in the GDB manual. | |
647 | ||
648 | * Changes in GNU/Linux native debugging. | |
649 | ||
d7275149 MK |
650 | Support for debugging multi-threaded programs has been completely |
651 | revised for all platforms except m68k and sparc. You can now debug as | |
652 | many threads as your system allows you to have. | |
653 | ||
e23194cb EZ |
654 | Attach/detach is supported for multi-threaded programs. |
655 | ||
d7275149 MK |
656 | Support for SSE registers was added for x86. This doesn't work for |
657 | multi-threaded programs though. | |
e23194cb EZ |
658 | |
659 | * Changes in MIPS configurations. | |
bf64bfd6 AC |
660 | |
661 | Multi-arch support is enabled for all MIPS configurations. | |
662 | ||
e23194cb EZ |
663 | GDB can now be built as native debugger on SGI Irix 6.x systems for |
664 | debugging n32 executables. (Debugging 64-bit executables is not yet | |
665 | supported.) | |
666 | ||
667 | * Unified support for hardware watchpoints in all x86 configurations. | |
668 | ||
669 | Most (if not all) native x86 configurations support hardware-assisted | |
670 | breakpoints and watchpoints in a unified manner. This support | |
671 | implements debug register sharing between watchpoints, which allows to | |
672 | put a virtually infinite number of watchpoints on the same address, | |
673 | and also supports watching regions up to 16 bytes with several debug | |
674 | registers. | |
675 | ||
676 | The new maintenance command `maintenance show-debug-regs' toggles | |
677 | debugging print-outs in functions that insert, remove, and test | |
678 | watchpoints and hardware breakpoints. | |
679 | ||
680 | * Changes in the DJGPP native configuration. | |
681 | ||
682 | New command ``info dos sysinfo'' displays assorted information about | |
683 | the CPU, OS, memory, and DPMI server. | |
684 | ||
685 | New commands ``info dos gdt'', ``info dos ldt'', and ``info dos idt'' | |
686 | display information about segment descriptors stored in GDT, LDT, and | |
687 | IDT. | |
688 | ||
689 | New commands ``info dos pde'' and ``info dos pte'' display entries | |
690 | from Page Directory and Page Tables (for now works with CWSDPMI only). | |
691 | New command ``info dos address-pte'' displays the Page Table entry for | |
692 | a given linear address. | |
693 | ||
694 | GDB can now pass command lines longer than 126 characters to the | |
695 | program being debugged (requires an update to the libdbg.a library | |
696 | which is part of the DJGPP development kit). | |
697 | ||
698 | DWARF2 debug info is now supported. | |
699 | ||
6c56c069 EZ |
700 | It is now possible to `step' and `next' through calls to `longjmp'. |
701 | ||
e23194cb EZ |
702 | * Changes in documentation. |
703 | ||
704 | All GDB documentation was converted to GFDL, the GNU Free | |
705 | Documentation License. | |
706 | ||
707 | Tracepoints-related commands are now fully documented in the GDB | |
708 | manual. | |
709 | ||
710 | TUI, the Text-mode User Interface, is now documented in the manual. | |
711 | ||
712 | Tracepoints-related commands are now fully documented in the GDB | |
713 | manual. | |
714 | ||
715 | The "GDB Internals" manual now has an index. It also includes | |
716 | documentation of `ui_out' functions, GDB coding standards, x86 | |
717 | hardware watchpoints, and memory region attributes. | |
718 | ||
5d6640b1 AC |
719 | * GDB's version number moved to ``version.in'' |
720 | ||
721 | The Makefile variable VERSION has been replaced by the file | |
722 | ``version.in''. People creating GDB distributions should update the | |
723 | contents of this file. | |
724 | ||
1a1d8446 AC |
725 | * gdba.el deleted |
726 | ||
727 | GUD support is now a standard part of the EMACS distribution. | |
139760b7 | 728 | |
9debab2f | 729 | *** Changes in GDB 5.0: |
7a292a7a | 730 | |
c63ce875 EZ |
731 | * Improved support for debugging FP programs on x86 targets |
732 | ||
733 | Unified and much-improved support for debugging floating-point | |
734 | programs on all x86 targets. In particular, ``info float'' now | |
735 | displays the FP registers in the same format on all x86 targets, with | |
736 | greater level of detail. | |
737 | ||
738 | * Improvements and bugfixes in hardware-assisted watchpoints | |
739 | ||
740 | It is now possible to watch array elements, struct members, and | |
741 | bitfields with hardware-assisted watchpoints. Data-read watchpoints | |
742 | on x86 targets no longer erroneously trigger when the address is | |
743 | written. | |
744 | ||
745 | * Improvements in the native DJGPP version of GDB | |
746 | ||
747 | The distribution now includes all the scripts and auxiliary files | |
748 | necessary to build the native DJGPP version on MS-DOS/MS-Windows | |
749 | machines ``out of the box''. | |
750 | ||
751 | The DJGPP version can now debug programs that use signals. It is | |
752 | possible to catch signals that happened in the debuggee, deliver | |
753 | signals to it, interrupt it with Ctrl-C, etc. (Previously, a signal | |
754 | would kill the program being debugged.) Programs that hook hardware | |
755 | interrupts (keyboard, timer, etc.) can also be debugged. | |
756 | ||
757 | It is now possible to debug DJGPP programs that redirect their | |
758 | standard handles or switch them to raw (as opposed to cooked) mode, or | |
759 | even close them. The command ``run < foo > bar'' works as expected, | |
760 | and ``info terminal'' reports useful information about the debuggee's | |
761 | terminal, including raw/cooked mode, redirection, etc. | |
762 | ||
763 | The DJGPP version now uses termios functions for console I/O, which | |
764 | enables debugging graphics programs. Interrupting GDB with Ctrl-C | |
765 | also works. | |
766 | ||
767 | DOS-style file names with drive letters are now fully supported by | |
768 | GDB. | |
769 | ||
770 | It is now possible to debug DJGPP programs that switch their working | |
771 | directory. It is also possible to rerun the debuggee any number of | |
772 | times without restarting GDB; thus, you can use the same setup, | |
773 | breakpoints, etc. for many debugging sessions. | |
774 | ||
ed9a39eb JM |
775 | * New native configurations |
776 | ||
777 | ARM GNU/Linux arm*-*-linux* | |
afc05dd4 | 778 | PowerPC GNU/Linux powerpc-*-linux* |
ed9a39eb | 779 | |
7a292a7a SS |
780 | * New targets |
781 | ||
96baa820 | 782 | Motorola MCore mcore-*-* |
adf40b2e JM |
783 | x86 VxWorks i[3456]86-*-vxworks* |
784 | PowerPC VxWorks powerpc-*-vxworks* | |
7a292a7a SS |
785 | TI TMS320C80 tic80-*-* |
786 | ||
085dd6e6 JM |
787 | * OBSOLETE configurations |
788 | ||
789 | Altos 3068 m68*-altos-* | |
790 | Convex c1-*-*, c2-*-* | |
9846de1b | 791 | Pyramid pyramid-*-* |
ed9a39eb | 792 | ARM RISCix arm-*-* (as host) |
104c1213 | 793 | Tahoe tahoe-*-* |
7a292a7a | 794 | |
9debab2f AC |
795 | Configurations that have been declared obsolete will be commented out, |
796 | but the code will be left in place. If there is no activity to revive | |
797 | these configurations before the next release of GDB, the sources will | |
798 | be permanently REMOVED. | |
799 | ||
5330533d SS |
800 | * Gould support removed |
801 | ||
802 | Support for the Gould PowerNode and NP1 has been removed. | |
803 | ||
bc9e5bbf AC |
804 | * New features for SVR4 |
805 | ||
806 | On SVR4 native platforms (such as Solaris), if you attach to a process | |
807 | without first loading a symbol file, GDB will now attempt to locate and | |
808 | load symbols from the running process's executable file. | |
809 | ||
810 | * Many C++ enhancements | |
811 | ||
812 | C++ support has been greatly improved. Overload resolution now works properly | |
813 | in almost all cases. RTTI support is on the way. | |
814 | ||
adf40b2e JM |
815 | * Remote targets can connect to a sub-program |
816 | ||
817 | A popen(3) style serial-device has been added. This device starts a | |
818 | sub-process (such as a stand-alone simulator) and then communicates | |
819 | with that. The sub-program to run is specified using the syntax | |
820 | ``|<program> <args>'' vis: | |
821 | ||
822 | (gdb) set remotedebug 1 | |
823 | (gdb) target extended-remote |mn10300-elf-sim program-args | |
824 | ||
43e526b9 JM |
825 | * MIPS 64 remote protocol |
826 | ||
827 | A long standing bug in the mips64 remote protocol where by GDB | |
828 | expected certain 32 bit registers (ex SR) to be transfered as 32 | |
829 | instead of 64 bits has been fixed. | |
830 | ||
831 | The command ``set remote-mips64-transfers-32bit-regs on'' has been | |
832 | added to provide backward compatibility with older versions of GDB. | |
833 | ||
96baa820 JM |
834 | * ``set remotebinarydownload'' replaced by ``set remote X-packet'' |
835 | ||
836 | The command ``set remotebinarydownload'' command has been replaced by | |
837 | ``set remote X-packet''. Other commands in ``set remote'' family | |
838 | include ``set remote P-packet''. | |
839 | ||
11cf8741 JM |
840 | * Breakpoint commands accept ranges. |
841 | ||
842 | The breakpoint commands ``enable'', ``disable'', and ``delete'' now | |
843 | accept a range of breakpoints, e.g. ``5-7''. The tracepoint command | |
844 | ``tracepoint passcount'' also accepts a range of tracepoints. | |
845 | ||
7876dd43 DB |
846 | * ``apropos'' command added. |
847 | ||
848 | The ``apropos'' command searches through command names and | |
849 | documentation strings, printing out matches, making it much easier to | |
850 | try to find a command that does what you are looking for. | |
851 | ||
bc9e5bbf AC |
852 | * New MI interface |
853 | ||
854 | A new machine oriented interface (MI) has been added to GDB. This | |
855 | interface is designed for debug environments running GDB as a separate | |
7162c0ca EZ |
856 | process. This is part of the long term libGDB project. See the |
857 | "GDB/MI" chapter of the GDB manual for further information. It can be | |
858 | enabled by configuring with: | |
bc9e5bbf AC |
859 | |
860 | .../configure --enable-gdbmi | |
861 | ||
c906108c SS |
862 | *** Changes in GDB-4.18: |
863 | ||
864 | * New native configurations | |
865 | ||
866 | HP-UX 10.20 hppa*-*-hpux10.20 | |
867 | HP-UX 11.x hppa*-*-hpux11.0* | |
55241689 | 868 | M68K GNU/Linux m68*-*-linux* |
c906108c SS |
869 | |
870 | * New targets | |
871 | ||
872 | Fujitsu FR30 fr30-*-elf* | |
873 | Intel StrongARM strongarm-*-* | |
874 | Mitsubishi D30V d30v-*-* | |
875 | ||
876 | * OBSOLETE configurations | |
877 | ||
878 | Gould PowerNode, NP1 np1-*-*, pn-*-* | |
879 | ||
880 | Configurations that have been declared obsolete will be commented out, | |
881 | but the code will be left in place. If there is no activity to revive | |
882 | these configurations before the next release of GDB, the sources will | |
883 | be permanently REMOVED. | |
884 | ||
885 | * ANSI/ISO C | |
886 | ||
887 | As a compatibility experiment, GDB's source files buildsym.h and | |
888 | buildsym.c have been converted to pure standard C, no longer | |
889 | containing any K&R compatibility code. We believe that all systems in | |
890 | use today either come with a standard C compiler, or have a GCC port | |
891 | available. If this is not true, please report the affected | |
892 | configuration to bug-gdb@gnu.org immediately. See the README file for | |
893 | information about getting a standard C compiler if you don't have one | |
894 | already. | |
895 | ||
896 | * Readline 2.2 | |
897 | ||
898 | GDB now uses readline 2.2. | |
899 | ||
900 | * set extension-language | |
901 | ||
902 | You can now control the mapping between filename extensions and source | |
903 | languages by using the `set extension-language' command. For instance, | |
904 | you can ask GDB to treat .c files as C++ by saying | |
905 | set extension-language .c c++ | |
906 | The command `info extensions' lists all of the recognized extensions | |
907 | and their associated languages. | |
908 | ||
909 | * Setting processor type for PowerPC and RS/6000 | |
910 | ||
911 | When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target, | |
912 | you can use the `set processor' command to specify what variant of the | |
913 | PowerPC family you are debugging. The command | |
914 | ||
915 | set processor NAME | |
916 | ||
917 | sets the PowerPC/RS6000 variant to NAME. GDB knows about the | |
918 | following PowerPC and RS6000 variants: | |
919 | ||
920 | ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code | |
921 | rs6000 IBM RS6000 ("POWER") architecture, user-level view | |
922 | 403 IBM PowerPC 403 | |
923 | 403GC IBM PowerPC 403GC | |
924 | 505 Motorola PowerPC 505 | |
925 | 860 Motorola PowerPC 860 or 850 | |
926 | 601 Motorola PowerPC 601 | |
927 | 602 Motorola PowerPC 602 | |
928 | 603 Motorola/IBM PowerPC 603 or 603e | |
929 | 604 Motorola PowerPC 604 or 604e | |
930 | 750 Motorola/IBM PowerPC 750 or 750 | |
931 | ||
932 | At the moment, this command just tells GDB what to name the | |
933 | special-purpose processor registers. Since almost all the affected | |
934 | registers are inaccessible to user-level programs, this command is | |
935 | only useful for remote debugging in its present form. | |
936 | ||
937 | * HP-UX support | |
938 | ||
939 | Thanks to a major code donation from Hewlett-Packard, GDB now has much | |
940 | more extensive support for HP-UX. Added features include shared | |
941 | library support, kernel threads and hardware watchpoints for 11.00, | |
942 | support for HP's ANSI C and C++ compilers, and a compatibility mode | |
943 | for xdb and dbx commands. | |
944 | ||
945 | * Catchpoints | |
946 | ||
947 | HP's donation includes the new concept of catchpoints, which is a | |
948 | generalization of the old catch command. On HP-UX, it is now possible | |
949 | to catch exec, fork, and vfork, as well as library loading. | |
950 | ||
951 | This means that the existing catch command has changed; its first | |
952 | argument now specifies the type of catch to be set up. See the | |
953 | output of "help catch" for a list of catchpoint types. | |
954 | ||
955 | * Debugging across forks | |
956 | ||
957 | On HP-UX, you can choose which process to debug when a fork() happens | |
958 | in the inferior. | |
959 | ||
960 | * TUI | |
961 | ||
962 | HP has donated a curses-based terminal user interface (TUI). To get | |
963 | it, build with --enable-tui. Although this can be enabled for any | |
964 | configuration, at present it only works for native HP debugging. | |
965 | ||
966 | * GDB remote protocol additions | |
967 | ||
968 | A new protocol packet 'X' that writes binary data is now available. | |
969 | Default behavior is to try 'X', then drop back to 'M' if the stub | |
970 | fails to respond. The settable variable `remotebinarydownload' | |
971 | allows explicit control over the use of 'X'. | |
972 | ||
973 | For 64-bit targets, the memory packets ('M' and 'm') can now contain a | |
974 | full 64-bit address. The command | |
975 | ||
976 | set remoteaddresssize 32 | |
977 | ||
978 | can be used to revert to the old behaviour. For existing remote stubs | |
979 | the change should not be noticed, as the additional address information | |
980 | will be discarded. | |
981 | ||
982 | In order to assist in debugging stubs, you may use the maintenance | |
983 | command `packet' to send any text string to the stub. For instance, | |
984 | ||
985 | maint packet heythere | |
986 | ||
987 | sends the packet "$heythere#<checksum>". Note that it is very easy to | |
988 | disrupt a debugging session by sending the wrong packet at the wrong | |
989 | time. | |
990 | ||
991 | The compare-sections command allows you to compare section data on the | |
992 | target to what is in the executable file without uploading or | |
993 | downloading, by comparing CRC checksums. | |
994 | ||
995 | * Tracing can collect general expressions | |
996 | ||
997 | You may now collect general expressions at tracepoints. This requires | |
998 | further additions to the target-side stub; see tracepoint.c and | |
999 | doc/agentexpr.texi for further details. | |
1000 | ||
1001 | * mask-address variable for Mips | |
1002 | ||
1003 | For Mips targets, you may control the zeroing of the upper 32 bits of | |
1004 | a 64-bit address by entering `set mask-address on'. This is mainly | |
1005 | of interest to users of embedded R4xxx and R5xxx processors. | |
1006 | ||
1007 | * Higher serial baud rates | |
1008 | ||
1009 | GDB's serial code now allows you to specify baud rates 57600, 115200, | |
1010 | 230400, and 460800 baud. (Note that your host system may not be able | |
1011 | to achieve all of these rates.) | |
1012 | ||
1013 | * i960 simulator | |
1014 | ||
1015 | The i960 configuration now includes an initial implementation of a | |
1016 | builtin simulator, contributed by Jim Wilson. | |
1017 | ||
1018 | ||
1019 | *** Changes in GDB-4.17: | |
1020 | ||
1021 | * New native configurations | |
1022 | ||
1023 | Alpha GNU/Linux alpha*-*-linux* | |
1024 | Unixware 2.x i[3456]86-unixware2* | |
1025 | Irix 6.x mips*-sgi-irix6* | |
1026 | PowerPC GNU/Linux powerpc-*-linux* | |
1027 | PowerPC Solaris powerpcle-*-solaris* | |
1028 | Sparc GNU/Linux sparc-*-linux* | |
1029 | Motorola sysV68 R3V7.1 m68k-motorola-sysv | |
1030 | ||
1031 | * New targets | |
1032 | ||
1033 | Argonaut Risc Chip (ARC) arc-*-* | |
1034 | Hitachi H8/300S h8300*-*-* | |
1035 | Matsushita MN10200 w/simulator mn10200-*-* | |
1036 | Matsushita MN10300 w/simulator mn10300-*-* | |
1037 | MIPS NEC VR4100 mips64*vr4100*{,el}-*-elf* | |
1038 | MIPS NEC VR5000 mips64*vr5000*{,el}-*-elf* | |
1039 | MIPS Toshiba TX39 mips64*tx39*{,el}-*-elf* | |
1040 | Mitsubishi D10V w/simulator d10v-*-* | |
1041 | Mitsubishi M32R/D w/simulator m32r-*-elf* | |
1042 | Tsqware Sparclet sparclet-*-* | |
1043 | NEC V850 w/simulator v850-*-* | |
1044 | ||
1045 | * New debugging protocols | |
1046 | ||
1047 | ARM with RDI protocol arm*-*-* | |
1048 | M68K with dBUG monitor m68*-*-{aout,coff,elf} | |
1049 | DDB and LSI variants of PMON protocol mips*-*-* | |
1050 | PowerPC with DINK32 monitor powerpc{,le}-*-eabi | |
1051 | PowerPC with SDS protocol powerpc{,le}-*-eabi | |
1052 | Macraigor OCD (Wiggler) devices powerpc{,le}-*-eabi | |
1053 | ||
1054 | * DWARF 2 | |
1055 | ||
1056 | All configurations can now understand and use the DWARF 2 debugging | |
1057 | format. The choice is automatic, if the symbol file contains DWARF 2 | |
1058 | information. | |
1059 | ||
1060 | * Java frontend | |
1061 | ||
1062 | GDB now includes basic Java language support. This support is | |
1063 | only useful with Java compilers that produce native machine code. | |
1064 | ||
1065 | * solib-absolute-prefix and solib-search-path | |
1066 | ||
1067 | For SunOS and SVR4 shared libraries, you may now set the prefix for | |
1068 | loading absolute shared library symbol files, and the search path for | |
1069 | locating non-absolute shared library symbol files. | |
1070 | ||
1071 | * Live range splitting | |
1072 | ||
1073 | GDB can now effectively debug code for which GCC has performed live | |
1074 | range splitting as part of its optimization. See gdb/doc/LRS for | |
1075 | more details on the expected format of the stabs information. | |
1076 | ||
1077 | * Hurd support | |
1078 | ||
1079 | GDB's support for the GNU Hurd, including thread debugging, has been | |
1080 | updated to work with current versions of the Hurd. | |
1081 | ||
1082 | * ARM Thumb support | |
1083 | ||
1084 | GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit | |
1085 | instruction set. ARM GDB automatically detects when Thumb | |
1086 | instructions are in use, and adjusts disassembly and backtracing | |
1087 | accordingly. | |
1088 | ||
1089 | * MIPS16 support | |
1090 | ||
1091 | GDB's MIPS target configurations now handle the MIP16 16-bit | |
1092 | instruction set. | |
1093 | ||
1094 | * Overlay support | |
1095 | ||
1096 | GDB now includes support for overlays; if an executable has been | |
1097 | linked such that multiple sections are based at the same address, GDB | |
1098 | will decide which section to use for symbolic info. You can choose to | |
1099 | control the decision manually, using overlay commands, or implement | |
1100 | additional target-side support and use "overlay load-target" to bring | |
1101 | in the overlay mapping. Do "help overlay" for more detail. | |
1102 | ||
1103 | * info symbol | |
1104 | ||
1105 | The command "info symbol <address>" displays information about | |
1106 | the symbol at the specified address. | |
1107 | ||
1108 | * Trace support | |
1109 | ||
1110 | The standard remote protocol now includes an extension that allows | |
1111 | asynchronous collection and display of trace data. This requires | |
1112 | extensive support in the target-side debugging stub. Tracing mode | |
1113 | includes a new interaction mode in GDB and new commands: see the | |
1114 | file tracepoint.c for more details. | |
1115 | ||
1116 | * MIPS simulator | |
1117 | ||
1118 | Configurations for embedded MIPS now include a simulator contributed | |
1119 | by Cygnus Solutions. The simulator supports the instruction sets | |
1120 | of most MIPS variants. | |
1121 | ||
1122 | * Sparc simulator | |
1123 | ||
1124 | Sparc configurations may now include the ERC32 simulator contributed | |
1125 | by the European Space Agency. The simulator is not built into | |
1126 | Sparc targets by default; configure with --enable-sim to include it. | |
1127 | ||
1128 | * set architecture | |
1129 | ||
1130 | For target configurations that may include multiple variants of a | |
1131 | basic architecture (such as MIPS and SH), you may now set the | |
1132 | architecture explicitly. "set arch" sets, "info arch" lists | |
1133 | the possible architectures. | |
1134 | ||
1135 | *** Changes in GDB-4.16: | |
1136 | ||
1137 | * New native configurations | |
1138 | ||
1139 | Windows 95, x86 Windows NT i[345]86-*-cygwin32 | |
1140 | M68K NetBSD m68k-*-netbsd* | |
1141 | PowerPC AIX 4.x powerpc-*-aix* | |
1142 | PowerPC MacOS powerpc-*-macos* | |
1143 | PowerPC Windows NT powerpcle-*-cygwin32 | |
1144 | RS/6000 AIX 4.x rs6000-*-aix4* | |
1145 | ||
1146 | * New targets | |
1147 | ||
1148 | ARM with RDP protocol arm-*-* | |
1149 | I960 with MON960 i960-*-coff | |
1150 | MIPS VxWorks mips*-*-vxworks* | |
1151 | MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf* | |
1152 | PowerPC with PPCBUG monitor powerpc{,le}-*-eabi* | |
1153 | Hitachi SH3 sh-*-* | |
1154 | Matra Sparclet sparclet-*-* | |
1155 | ||
1156 | * PowerPC simulator | |
1157 | ||
1158 | The powerpc-eabi configuration now includes the PSIM simulator, | |
1159 | contributed by Andrew Cagney, with assistance from Mike Meissner. | |
1160 | PSIM is a very elaborate model of the PowerPC, including not only | |
1161 | basic instruction set execution, but also details of execution unit | |
1162 | performance and I/O hardware. See sim/ppc/README for more details. | |
1163 | ||
1164 | * Solaris 2.5 | |
1165 | ||
1166 | GDB now works with Solaris 2.5. | |
1167 | ||
1168 | * Windows 95/NT native | |
1169 | ||
1170 | GDB will now work as a native debugger on Windows 95 and Windows NT. | |
1171 | To build it from source, you must use the "gnu-win32" environment, | |
1172 | which uses a DLL to emulate enough of Unix to run the GNU tools. | |
1173 | Further information, binaries, and sources are available at | |
1174 | ftp.cygnus.com, under pub/gnu-win32. | |
1175 | ||
1176 | * dont-repeat command | |
1177 | ||
1178 | If a user-defined command includes the command `dont-repeat', then the | |
1179 | command will not be repeated if the user just types return. This is | |
1180 | useful if the command is time-consuming to run, so that accidental | |
1181 | extra keystrokes don't run the same command many times. | |
1182 | ||
1183 | * Send break instead of ^C | |
1184 | ||
1185 | The standard remote protocol now includes an option to send a break | |
1186 | rather than a ^C to the target in order to interrupt it. By default, | |
1187 | GDB will send ^C; to send a break, set the variable `remotebreak' to 1. | |
1188 | ||
1189 | * Remote protocol timeout | |
1190 | ||
1191 | The standard remote protocol includes a new variable `remotetimeout' | |
1192 | that allows you to set the number of seconds before GDB gives up trying | |
1193 | to read from the target. The default value is 2. | |
1194 | ||
1195 | * Automatic tracking of dynamic object loading (HPUX and Solaris only) | |
1196 | ||
1197 | By default GDB will automatically keep track of objects as they are | |
1198 | loaded and unloaded by the dynamic linker. By using the command `set | |
1199 | stop-on-solib-events 1' you can arrange for GDB to stop the inferior | |
1200 | when shared library events occur, thus allowing you to set breakpoints | |
1201 | in shared libraries which are explicitly loaded by the inferior. | |
1202 | ||
1203 | Note this feature does not work on hpux8. On hpux9 you must link | |
1204 | /usr/lib/end.o into your program. This feature should work | |
1205 | automatically on hpux10. | |
1206 | ||
1207 | * Irix 5.x hardware watchpoint support | |
1208 | ||
1209 | Irix 5 configurations now support the use of hardware watchpoints. | |
1210 | ||
1211 | * Mips protocol "SYN garbage limit" | |
1212 | ||
1213 | When debugging a Mips target using the `target mips' protocol, you | |
1214 | may set the number of characters that GDB will ignore by setting | |
1215 | the `syn-garbage-limit'. A value of -1 means that GDB will ignore | |
1216 | every character. The default value is 1050. | |
1217 | ||
1218 | * Recording and replaying remote debug sessions | |
1219 | ||
1220 | If you set `remotelogfile' to the name of a file, gdb will write to it | |
1221 | a recording of a remote debug session. This recording may then be | |
1222 | replayed back to gdb using "gdbreplay". See gdbserver/README for | |
1223 | details. This is useful when you have a problem with GDB while doing | |
1224 | remote debugging; you can make a recording of the session and send it | |
1225 | to someone else, who can then recreate the problem. | |
1226 | ||
1227 | * Speedups for remote debugging | |
1228 | ||
1229 | GDB includes speedups for downloading and stepping MIPS systems using | |
1230 | the IDT monitor, fast downloads to the Hitachi SH E7000 emulator, | |
1231 | and more efficient S-record downloading. | |
1232 | ||
1233 | * Memory use reductions and statistics collection | |
1234 | ||
1235 | GDB now uses less memory and reports statistics about memory usage. | |
1236 | Try the `maint print statistics' command, for example. | |
1237 | ||
1238 | *** Changes in GDB-4.15: | |
1239 | ||
1240 | * Psymtabs for XCOFF | |
1241 | ||
1242 | The symbol reader for AIX GDB now uses partial symbol tables. This | |
1243 | can greatly improve startup time, especially for large executables. | |
1244 | ||
1245 | * Remote targets use caching | |
1246 | ||
1247 | Remote targets now use a data cache to speed up communication with the | |
1248 | remote side. The data cache could lead to incorrect results because | |
1249 | it doesn't know about volatile variables, thus making it impossible to | |
1250 | debug targets which use memory mapped I/O devices. `set remotecache | |
1251 | off' turns the the data cache off. | |
1252 | ||
1253 | * Remote targets may have threads | |
1254 | ||
1255 | The standard remote protocol now includes support for multiple threads | |
1256 | in the target system, using new protocol commands 'H' and 'T'. See | |
1257 | gdb/remote.c for details. | |
1258 | ||
1259 | * NetROM support | |
1260 | ||
1261 | If GDB is configured with `--enable-netrom', then it will include | |
1262 | support for the NetROM ROM emulator from XLNT Designs. The NetROM | |
1263 | acts as though it is a bank of ROM on the target board, but you can | |
1264 | write into it over the network. GDB's support consists only of | |
1265 | support for fast loading into the emulated ROM; to debug, you must use | |
1266 | another protocol, such as standard remote protocol. The usual | |
1267 | sequence is something like | |
1268 | ||
1269 | target nrom <netrom-hostname> | |
1270 | load <prog> | |
1271 | target remote <netrom-hostname>:1235 | |
1272 | ||
1273 | * Macintosh host | |
1274 | ||
1275 | GDB now includes support for the Apple Macintosh, as a host only. It | |
1276 | may be run as either an MPW tool or as a standalone application, and | |
1277 | it can debug through the serial port. All the usual GDB commands are | |
1278 | available, but to the target command, you must supply "serial" as the | |
1279 | device type instead of "/dev/ttyXX". See mpw-README in the main | |
1280 | directory for more information on how to build. The MPW configuration | |
1281 | scripts */mpw-config.in support only a few targets, and only the | |
1282 | mips-idt-ecoff target has been tested. | |
1283 | ||
1284 | * Autoconf | |
1285 | ||
1286 | GDB configuration now uses autoconf. This is not user-visible, | |
1287 | but does simplify configuration and building. | |
1288 | ||
1289 | * hpux10 | |
1290 | ||
1291 | GDB now supports hpux10. | |
1292 | ||
1293 | *** Changes in GDB-4.14: | |
1294 | ||
1295 | * New native configurations | |
1296 | ||
1297 | x86 FreeBSD i[345]86-*-freebsd | |
1298 | x86 NetBSD i[345]86-*-netbsd | |
1299 | NS32k NetBSD ns32k-*-netbsd | |
1300 | Sparc NetBSD sparc-*-netbsd | |
1301 | ||
1302 | * New targets | |
1303 | ||
1304 | A29K VxWorks a29k-*-vxworks | |
1305 | HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro* | |
1306 | CPU32 EST-300 emulator m68*-*-est* | |
1307 | PowerPC ELF powerpc-*-elf | |
1308 | WDC 65816 w65-*-* | |
1309 | ||
1310 | * Alpha OSF/1 support for procfs | |
1311 | ||
1312 | GDB now supports procfs under OSF/1-2.x and higher, which makes it | |
1313 | possible to attach to running processes. As the mounting of the /proc | |
1314 | filesystem is optional on the Alpha, GDB automatically determines | |
1315 | the availability of /proc during startup. This can lead to problems | |
1316 | if /proc is unmounted after GDB has been started. | |
1317 | ||
1318 | * Arguments to user-defined commands | |
1319 | ||
1320 | User commands may accept up to 10 arguments separated by whitespace. | |
1321 | Arguments are accessed within the user command via $arg0..$arg9. A | |
1322 | trivial example: | |
1323 | define adder | |
1324 | print $arg0 + $arg1 + $arg2 | |
1325 | ||
1326 | To execute the command use: | |
1327 | adder 1 2 3 | |
1328 | ||
1329 | Defines the command "adder" which prints the sum of its three arguments. | |
1330 | Note the arguments are text substitutions, so they may reference variables, | |
1331 | use complex expressions, or even perform inferior function calls. | |
1332 | ||
1333 | * New `if' and `while' commands | |
1334 | ||
1335 | This makes it possible to write more sophisticated user-defined | |
1336 | commands. Both commands take a single argument, which is the | |
1337 | expression to evaluate, and must be followed by the commands to | |
1338 | execute, one per line, if the expression is nonzero, the list being | |
1339 | terminated by the word `end'. The `if' command list may include an | |
1340 | `else' word, which causes the following commands to be executed only | |
1341 | if the expression is zero. | |
1342 | ||
1343 | * Fortran source language mode | |
1344 | ||
1345 | GDB now includes partial support for Fortran 77. It will recognize | |
1346 | Fortran programs and can evaluate a subset of Fortran expressions, but | |
1347 | variables and functions may not be handled correctly. GDB will work | |
1348 | with G77, but does not yet know much about symbols emitted by other | |
1349 | Fortran compilers. | |
1350 | ||
1351 | * Better HPUX support | |
1352 | ||
1353 | Most debugging facilities now work on dynamic executables for HPPAs | |
1354 | running hpux9 or later. You can attach to running dynamically linked | |
1355 | processes, but by default the dynamic libraries will be read-only, so | |
1356 | for instance you won't be able to put breakpoints in them. To change | |
1357 | that behavior do the following before running the program: | |
1358 | ||
1359 | adb -w a.out | |
1360 | __dld_flags?W 0x5 | |
1361 | control-d | |
1362 | ||
1363 | This will cause the libraries to be mapped private and read-write. | |
1364 | To revert to the normal behavior, do this: | |
1365 | ||
1366 | adb -w a.out | |
1367 | __dld_flags?W 0x4 | |
1368 | control-d | |
1369 | ||
1370 | You cannot set breakpoints or examine data in the library until after | |
1371 | the library is loaded if the function/data symbols do not have | |
1372 | external linkage. | |
1373 | ||
1374 | GDB can now also read debug symbols produced by the HP C compiler on | |
1375 | HPPAs (sorry, no C++, Fortran or 68k support). | |
1376 | ||
1377 | * Target byte order now dynamically selectable | |
1378 | ||
1379 | You can choose which byte order to use with a target system, via the | |
1380 | commands "set endian big" and "set endian little", and you can see the | |
1381 | current setting by using "show endian". You can also give the command | |
1382 | "set endian auto", in which case GDB will use the byte order | |
1383 | associated with the executable. Currently, only embedded MIPS | |
1384 | configurations support dynamic selection of target byte order. | |
1385 | ||
1386 | * New DOS host serial code | |
1387 | ||
1388 | This version uses DPMI interrupts to handle buffered I/O, so you | |
1389 | no longer need to run asynctsr when debugging boards connected to | |
1390 | a PC's serial port. | |
1391 | ||
1392 | *** Changes in GDB-4.13: | |
1393 | ||
1394 | * New "complete" command | |
1395 | ||
1396 | This lists all the possible completions for the rest of the line, if it | |
1397 | were to be given as a command itself. This is intended for use by emacs. | |
1398 | ||
1399 | * Trailing space optional in prompt | |
1400 | ||
1401 | "set prompt" no longer adds a space for you after the prompt you set. This | |
1402 | allows you to set a prompt which ends in a space or one that does not. | |
1403 | ||
1404 | * Breakpoint hit counts | |
1405 | ||
1406 | "info break" now displays a count of the number of times the breakpoint | |
1407 | has been hit. This is especially useful in conjunction with "ignore"; you | |
1408 | can ignore a large number of breakpoint hits, look at the breakpoint info | |
1409 | to see how many times the breakpoint was hit, then run again, ignoring one | |
1410 | less than that number, and this will get you quickly to the last hit of | |
1411 | that breakpoint. | |
1412 | ||
1413 | * Ability to stop printing at NULL character | |
1414 | ||
1415 | "set print null-stop" will cause GDB to stop printing the characters of | |
1416 | an array when the first NULL is encountered. This is useful when large | |
1417 | arrays actually contain only short strings. | |
1418 | ||
1419 | * Shared library breakpoints | |
1420 | ||
1421 | In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set | |
1422 | breakpoints in shared libraries before the executable is run. | |
1423 | ||
1424 | * Hardware watchpoints | |
1425 | ||
1426 | There is a new hardware breakpoint for the watch command for sparclite | |
1427 | targets. See gdb/sparclite/hw_breakpoint.note. | |
1428 | ||
55241689 | 1429 | Hardware watchpoints are also now supported under GNU/Linux. |
c906108c SS |
1430 | |
1431 | * Annotations | |
1432 | ||
1433 | Annotations have been added. These are for use with graphical interfaces, | |
1434 | and are still experimental. Currently only gdba.el uses these. | |
1435 | ||
1436 | * Improved Irix 5 support | |
1437 | ||
1438 | GDB now works properly with Irix 5.2. | |
1439 | ||
1440 | * Improved HPPA support | |
1441 | ||
1442 | GDB now works properly with the latest GCC and GAS. | |
1443 | ||
1444 | * New native configurations | |
1445 | ||
1446 | Sequent PTX4 i[34]86-sequent-ptx4 | |
1447 | HPPA running OSF/1 hppa*-*-osf* | |
1448 | Atari TT running SVR4 m68*-*-sysv4* | |
1449 | RS/6000 LynxOS rs6000-*-lynxos* | |
1450 | ||
1451 | * New targets | |
1452 | ||
1453 | OS/9000 i[34]86-*-os9k | |
1454 | MIPS R4000 mips64*{,el}-*-{ecoff,elf} | |
1455 | Sparc64 sparc64-*-* | |
1456 | ||
1457 | * Hitachi SH7000 and E7000-PC ICE support | |
1458 | ||
1459 | There is now support for communicating with the Hitachi E7000-PC ICE. | |
1460 | This is available automatically when GDB is configured for the SH. | |
1461 | ||
1462 | * Fixes | |
1463 | ||
1464 | As usual, a variety of small fixes and improvements, both generic | |
1465 | and configuration-specific. See the ChangeLog for more detail. | |
1466 | ||
1467 | *** Changes in GDB-4.12: | |
1468 | ||
1469 | * Irix 5 is now supported | |
1470 | ||
1471 | * HPPA support | |
1472 | ||
1473 | GDB-4.12 on the HPPA has a number of changes which make it unable | |
1474 | to debug the output from the currently released versions of GCC and | |
1475 | GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release | |
1476 | of GCC and GAS, versions of these tools designed to work with GDB-4.12 | |
1477 | can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist. | |
1478 | ||
1479 | ||
1480 | *** Changes in GDB-4.11: | |
1481 | ||
1482 | * User visible changes: | |
1483 | ||
1484 | * Remote Debugging | |
1485 | ||
1486 | The "set remotedebug" option is now consistent between the mips remote | |
1487 | target, remote targets using the gdb-specific protocol, UDI (AMD's | |
1488 | debug protocol for the 29k) and the 88k bug monitor. It is now an | |
1489 | integer specifying a debug level (normally 0 or 1, but 2 means more | |
1490 | debugging info for the mips target). | |
1491 | ||
1492 | * DEC Alpha native support | |
1493 | ||
1494 | GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable | |
1495 | debug info, but GDB works fairly well with the DEC compiler and should | |
1496 | work with a future GCC release. See the README file for a few | |
1497 | Alpha-specific notes. | |
1498 | ||
1499 | * Preliminary thread implementation | |
1500 | ||
1501 | GDB now has preliminary thread support for both SGI/Irix and LynxOS. | |
1502 | ||
1503 | * LynxOS native and target support for 386 | |
1504 | ||
1505 | This release has been hosted on LynxOS 2.2, and also can be configured | |
1506 | to remotely debug programs running under LynxOS (see gdb/gdbserver/README | |
1507 | for details). | |
1508 | ||
1509 | * Improvements in C++ mangling/demangling. | |
1510 | ||
1511 | This release has much better g++ debugging, specifically in name | |
1512 | mangling/demangling, virtual function calls, print virtual table, | |
1513 | call methods, ...etc. | |
1514 | ||
1515 | *** Changes in GDB-4.10: | |
1516 | ||
1517 | * User visible changes: | |
1518 | ||
1519 | Remote debugging using the GDB-specific (`target remote') protocol now | |
1520 | supports the `load' command. This is only useful if you have some | |
1521 | other way of getting the stub to the target system, and you can put it | |
1522 | somewhere in memory where it won't get clobbered by the download. | |
1523 | ||
1524 | Filename completion now works. | |
1525 | ||
1526 | When run under emacs mode, the "info line" command now causes the | |
1527 | arrow to point to the line specified. Also, "info line" prints | |
1528 | addresses in symbolic form (as well as hex). | |
1529 | ||
1530 | All vxworks based targets now support a user settable option, called | |
1531 | vxworks-timeout. This option represents the number of seconds gdb | |
1532 | should wait for responses to rpc's. You might want to use this if | |
1533 | your vxworks target is, perhaps, a slow software simulator or happens | |
1534 | to be on the far side of a thin network line. | |
1535 | ||
1536 | * DEC alpha support | |
1537 | ||
1538 | This release contains support for using a DEC alpha as a GDB host for | |
1539 | cross debugging. Native alpha debugging is not supported yet. | |
1540 | ||
1541 | ||
1542 | *** Changes in GDB-4.9: | |
1543 | ||
1544 | * Testsuite | |
1545 | ||
1546 | This is the first GDB release which is accompanied by a matching testsuite. | |
1547 | The testsuite requires installation of dejagnu, which should be available | |
1548 | via ftp from most sites that carry GNU software. | |
1549 | ||
1550 | * C++ demangling | |
1551 | ||
1552 | 'Cfront' style demangling has had its name changed to 'ARM' style, to | |
1553 | emphasize that it was written from the specifications in the C++ Annotated | |
1554 | Reference Manual, not necessarily to be compatible with AT&T cfront. Despite | |
1555 | disclaimers, it still generated too much confusion with users attempting to | |
1556 | use gdb with AT&T cfront. | |
1557 | ||
1558 | * Simulators | |
1559 | ||
1560 | GDB now uses a standard remote interface to a simulator library. | |
1561 | So far, the library contains simulators for the Zilog Z8001/2, the | |
1562 | Hitachi H8/300, H8/500 and Super-H. | |
1563 | ||
1564 | * New targets supported | |
1565 | ||
1566 | H8/300 simulator h8300-hitachi-hms or h8300hms | |
1567 | H8/500 simulator h8500-hitachi-hms or h8500hms | |
1568 | SH simulator sh-hitachi-hms or sh | |
1569 | Z8000 simulator z8k-zilog-none or z8ksim | |
1570 | IDT MIPS board over serial line mips-idt-ecoff | |
1571 | ||
1572 | Cross-debugging to GO32 targets is supported. It requires a custom | |
1573 | version of the i386-stub.c module which is integrated with the | |
1574 | GO32 memory extender. | |
1575 | ||
1576 | * New remote protocols | |
1577 | ||
1578 | MIPS remote debugging protocol. | |
1579 | ||
1580 | * New source languages supported | |
1581 | ||
1582 | This version includes preliminary support for Chill, a Pascal like language | |
1583 | used by telecommunications companies. Chill support is also being integrated | |
1584 | into the GNU compiler, but we don't know when it will be publically available. | |
1585 | ||
1586 | ||
1587 | *** Changes in GDB-4.8: | |
1588 | ||
1589 | * HP Precision Architecture supported | |
1590 | ||
1591 | GDB now supports HP PA-RISC machines running HPUX. A preliminary | |
1592 | version of this support was available as a set of patches from the | |
1593 | University of Utah. GDB does not support debugging of programs | |
1594 | compiled with the HP compiler, because HP will not document their file | |
1595 | format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS | |
1596 | (as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z). | |
1597 | ||
1598 | Many problems in the preliminary version have been fixed. | |
1599 | ||
1600 | * Faster and better demangling | |
1601 | ||
1602 | We have improved template demangling and fixed numerous bugs in the GNU style | |
1603 | demangler. It can now handle type modifiers such as `static' or `const'. Wide | |
1604 | character types (wchar_t) are now supported. Demangling of each symbol is now | |
1605 | only done once, and is cached when the symbol table for a file is read in. | |
1606 | This results in a small increase in memory usage for C programs, a moderate | |
1607 | increase in memory usage for C++ programs, and a fantastic speedup in | |
1608 | symbol lookups. | |
1609 | ||
1610 | `Cfront' style demangling still doesn't work with AT&T cfront. It was written | |
1611 | from the specifications in the Annotated Reference Manual, which AT&T's | |
1612 | compiler does not actually implement. | |
1613 | ||
1614 | * G++ multiple inheritance compiler problem | |
1615 | ||
1616 | In the 2.3.2 release of gcc/g++, how the compiler resolves multiple | |
1617 | inheritance lattices was reworked to properly discover ambiguities. We | |
1618 | recently found an example which causes this new algorithm to fail in a | |
1619 | very subtle way, producing bad debug information for those classes. | |
1620 | The file 'gcc.patch' (in this directory) can be applied to gcc to | |
1621 | circumvent the problem. A future GCC release will contain a complete | |
1622 | fix. | |
1623 | ||
1624 | The previous G++ debug info problem (mentioned below for the gdb-4.7 | |
1625 | release) is fixed in gcc version 2.3.2. | |
1626 | ||
1627 | * Improved configure script | |
1628 | ||
1629 | The `configure' script will now attempt to guess your system type if | |
1630 | you don't supply a host system type. The old scheme of supplying a | |
1631 | host system triplet is preferable over using this. All the magic is | |
1632 | done in the new `config.guess' script. Examine it for details. | |
1633 | ||
1634 | We have also brought our configure script much more in line with the FSF's | |
1635 | version. It now supports the --with-xxx options. In particular, | |
1636 | `--with-minimal-bfd' can be used to make the GDB binary image smaller. | |
1637 | The resulting GDB will not be able to read arbitrary object file formats -- | |
1638 | only the format ``expected'' to be used on the configured target system. | |
1639 | We hope to make this the default in a future release. | |
1640 | ||
1641 | * Documentation improvements | |
1642 | ||
1643 | There's new internal documentation on how to modify GDB, and how to | |
1644 | produce clean changes to the code. We implore people to read it | |
1645 | before submitting changes. | |
1646 | ||
1647 | The GDB manual uses new, sexy Texinfo conditionals, rather than arcane | |
1648 | M4 macros. The new texinfo.tex is provided in this release. Pre-built | |
1649 | `info' files are also provided. To build `info' files from scratch, | |
1650 | you will need the latest `makeinfo' release, which will be available in | |
1651 | a future texinfo-X.Y release. | |
1652 | ||
1653 | *NOTE* The new texinfo.tex can cause old versions of TeX to hang. | |
1654 | We're not sure exactly which versions have this problem, but it has | |
1655 | been seen in 3.0. We highly recommend upgrading to TeX version 3.141 | |
1656 | or better. If that isn't possible, there is a patch in | |
1657 | `texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work | |
1658 | around this problem. | |
1659 | ||
1660 | * New features | |
1661 | ||
1662 | GDB now supports array constants that can be used in expressions typed in by | |
1663 | the user. The syntax is `{element, element, ...}'. Ie: you can now type | |
1664 | `print {1, 2, 3}', and it will build up an array in memory malloc'd in | |
1665 | the target program. | |
1666 | ||
1667 | The new directory `gdb/sparclite' contains a program that demonstrates | |
1668 | how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor. | |
1669 | ||
1670 | * New native hosts supported | |
1671 | ||
1672 | HP/PA-RISC under HPUX using GNU tools hppa1.1-hp-hpux | |
1673 | 386 CPUs running SCO Unix 3.2v4 i386-unknown-sco3.2v4 | |
1674 | ||
1675 | * New targets supported | |
1676 | ||
1677 | AMD 29k family via UDI a29k-amd-udi or udi29k | |
1678 | ||
1679 | * New file formats supported | |
1680 | ||
1681 | BFD now supports reading HP/PA-RISC executables (SOM file format?), | |
1682 | HPUX core files, and SCO 3.2v2 core files. | |
1683 | ||
1684 | * Major bug fixes | |
1685 | ||
1686 | Attaching to processes now works again; thanks for the many bug reports. | |
1687 | ||
1688 | We have also stomped on a bunch of core dumps caused by | |
1689 | printf_filtered("%s") problems. | |
1690 | ||
1691 | We eliminated a copyright problem on the rpc and ptrace header files | |
1692 | for VxWorks, which was discovered at the last minute during the 4.7 | |
1693 | release. You should now be able to build a VxWorks GDB. | |
1694 | ||
1695 | You can now interrupt gdb while an attached process is running. This | |
1696 | will cause the attached process to stop, and give control back to GDB. | |
1697 | ||
1698 | We fixed problems caused by using too many file descriptors | |
1699 | for reading symbols from object files and libraries. This was | |
1700 | especially a problem for programs that used many (~100) shared | |
1701 | libraries. | |
1702 | ||
1703 | The `step' command now only enters a subroutine if there is line number | |
1704 | information for the subroutine. Otherwise it acts like the `next' | |
1705 | command. Previously, `step' would enter subroutines if there was | |
1706 | any debugging information about the routine. This avoids problems | |
1707 | when using `cc -g1' on MIPS machines. | |
1708 | ||
1709 | * Internal improvements | |
1710 | ||
1711 | GDB's internal interfaces have been improved to make it easier to support | |
1712 | debugging of multiple languages in the future. | |
1713 | ||
1714 | GDB now uses a common structure for symbol information internally. | |
1715 | Minimal symbols (derived from linkage symbols in object files), partial | |
1716 | symbols (from a quick scan of debug information), and full symbols | |
1717 | contain a common subset of information, making it easier to write | |
1718 | shared code that handles any of them. | |
1719 | ||
1720 | * New command line options | |
1721 | ||
1722 | We now accept --silent as an alias for --quiet. | |
1723 | ||
1724 | * Mmalloc licensing | |
1725 | ||
1726 | The memory-mapped-malloc library is now licensed under the GNU Library | |
1727 | General Public License. | |
1728 | ||
1729 | *** Changes in GDB-4.7: | |
1730 | ||
1731 | * Host/native/target split | |
1732 | ||
1733 | GDB has had some major internal surgery to untangle the support for | |
1734 | hosts and remote targets. Now, when you configure GDB for a remote | |
1735 | target, it will no longer load in all of the support for debugging | |
1736 | local programs on the host. When fully completed and tested, this will | |
1737 | ensure that arbitrary host/target combinations are possible. | |
1738 | ||
1739 | The primary conceptual shift is to separate the non-portable code in | |
1740 | GDB into three categories. Host specific code is required any time GDB | |
1741 | is compiled on that host, regardless of the target. Target specific | |
1742 | code relates to the peculiarities of the target, but can be compiled on | |
1743 | any host. Native specific code is everything else: it can only be | |
1744 | built when the host and target are the same system. Child process | |
1745 | handling and core file support are two common `native' examples. | |
1746 | ||
1747 | GDB's use of /proc for controlling Unix child processes is now cleaner. | |
1748 | It has been split out into a single module under the `target_ops' vector, | |
1749 | plus two native-dependent functions for each system that uses /proc. | |
1750 | ||
1751 | * New hosts supported | |
1752 | ||
1753 | HP/Apollo 68k (under the BSD domain) m68k-apollo-bsd or apollo68bsd | |
1754 | 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd | |
1755 | 386 CPUs running SCO Unix i386-unknown-scosysv322 or i386sco | |
1756 | ||
1757 | * New targets supported | |
1758 | ||
1759 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
1760 | 68030 and CPU32 m68030-*-*, m68332-*-* | |
1761 | ||
1762 | * New native hosts supported | |
1763 | ||
1764 | 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd | |
1765 | (386bsd is not well tested yet) | |
1766 | 386 CPUs running SCO Unix i386-unknown-scosysv322 or sco | |
1767 | ||
1768 | * New file formats supported | |
1769 | ||
1770 | BFD now supports COFF files for the Zilog Z8000 microprocessor. It | |
1771 | supports reading of `a.out.adobe' object files, which are an a.out | |
1772 | format extended with minimal information about multiple sections. | |
1773 | ||
1774 | * New commands | |
1775 | ||
1776 | `show copying' is the same as the old `info copying'. | |
1777 | `show warranty' is the same as `info warrantee'. | |
1778 | These were renamed for consistency. The old commands continue to work. | |
1779 | ||
1780 | `info handle' is a new alias for `info signals'. | |
1781 | ||
1782 | You can now define pre-command hooks, which attach arbitrary command | |
1783 | scripts to any command. The commands in the hook will be executed | |
1784 | prior to the user's command. You can also create a hook which will be | |
1785 | executed whenever the program stops. See gdb.texinfo. | |
1786 | ||
1787 | * C++ improvements | |
1788 | ||
1789 | We now deal with Cfront style name mangling, and can even extract type | |
1790 | info from mangled symbols. GDB can automatically figure out which | |
1791 | symbol mangling style your C++ compiler uses. | |
1792 | ||
1793 | Calling of methods and virtual functions has been improved as well. | |
1794 | ||
1795 | * Major bug fixes | |
1796 | ||
1797 | The crash that occured when debugging Sun Ansi-C compiled binaries is | |
1798 | fixed. This was due to mishandling of the extra N_SO stabs output | |
1799 | by the compiler. | |
1800 | ||
1801 | We also finally got Ultrix 4.2 running in house, and fixed core file | |
1802 | support, with help from a dozen people on the net. | |
1803 | ||
1804 | John M. Farrell discovered that the reason that single-stepping was so | |
1805 | slow on all of the Mips based platforms (primarily SGI and DEC) was | |
1806 | that we were trying to demangle and lookup a symbol used for internal | |
1807 | purposes on every instruction that was being stepped through. Changing | |
1808 | the name of that symbol so that it couldn't be mistaken for a C++ | |
1809 | mangled symbol sped things up a great deal. | |
1810 | ||
1811 | Rich Pixley sped up symbol lookups in general by getting much smarter | |
1812 | about when C++ symbol mangling is necessary. This should make symbol | |
1813 | completion (TAB on the command line) much faster. It's not as fast as | |
1814 | we'd like, but it's significantly faster than gdb-4.6. | |
1815 | ||
1816 | * AMD 29k support | |
1817 | ||
1818 | A new user controllable variable 'call_scratch_address' can | |
1819 | specify the location of a scratch area to be used when GDB | |
1820 | calls a function in the target. This is necessary because the | |
1821 | usual method of putting the scratch area on the stack does not work | |
1822 | in systems that have separate instruction and data spaces. | |
1823 | ||
1824 | We integrated changes to support the 29k UDI (Universal Debugger | |
1825 | Interface), but discovered at the last minute that we didn't have all | |
1826 | of the appropriate copyright paperwork. We are working with AMD to | |
1827 | resolve this, and hope to have it available soon. | |
1828 | ||
1829 | * Remote interfaces | |
1830 | ||
1831 | We have sped up the remote serial line protocol, especially for targets | |
1832 | with lots of registers. It now supports a new `expedited status' ('T') | |
1833 | message which can be used in place of the existing 'S' status message. | |
1834 | This allows the remote stub to send only the registers that GDB | |
1835 | needs to make a quick decision about single-stepping or conditional | |
1836 | breakpoints, eliminating the need to fetch the entire register set for | |
1837 | each instruction being stepped through. | |
1838 | ||
1839 | The GDB remote serial protocol now implements a write-through cache for | |
1840 | registers, only re-reading the registers if the target has run. | |
1841 | ||
1842 | There is also a new remote serial stub for SPARC processors. You can | |
1843 | find it in gdb-4.7/gdb/sparc-stub.c. This was written to support the | |
1844 | Fujitsu SPARClite processor, but will run on any stand-alone SPARC | |
1845 | processor with a serial port. | |
1846 | ||
1847 | * Configuration | |
1848 | ||
1849 | Configure.in files have become much easier to read and modify. A new | |
1850 | `table driven' format makes it more obvious what configurations are | |
1851 | supported, and what files each one uses. | |
1852 | ||
1853 | * Library changes | |
1854 | ||
1855 | There is a new opcodes library which will eventually contain all of the | |
1856 | disassembly routines and opcode tables. At present, it only contains | |
1857 | Sparc and Z8000 routines. This will allow the assembler, debugger, and | |
1858 | disassembler (binutils/objdump) to share these routines. | |
1859 | ||
1860 | The libiberty library is now copylefted under the GNU Library General | |
1861 | Public License. This allows more liberal use, and was done so libg++ | |
1862 | can use it. This makes no difference to GDB, since the Library License | |
1863 | grants all the rights from the General Public License. | |
1864 | ||
1865 | * Documentation | |
1866 | ||
1867 | The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete | |
1868 | reference to the stabs symbol info used by the debugger. It is (as far | |
1869 | as we know) the only published document on this fascinating topic. We | |
1870 | encourage you to read it, compare it to the stabs information on your | |
1871 | system, and send improvements on the document in general (to | |
1872 | bug-gdb@prep.ai.mit.edu). | |
1873 | ||
1874 | And, of course, many bugs have been fixed. | |
1875 | ||
1876 | ||
1877 | *** Changes in GDB-4.6: | |
1878 | ||
1879 | * Better support for C++ function names | |
1880 | ||
1881 | GDB now accepts as input the "demangled form" of C++ overloaded function | |
1882 | names and member function names, and can do command completion on such names | |
1883 | (using TAB, TAB-TAB, and ESC-?). The names have to be quoted with a pair of | |
1884 | single quotes. Examples are 'func (int, long)' and 'obj::operator==(obj&)'. | |
1885 | Make use of command completion, it is your friend. | |
1886 | ||
1887 | GDB also now accepts a variety of C++ mangled symbol formats. They are | |
1888 | the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style. | |
1889 | You can tell GDB which format to use by doing a 'set demangle-style {gnu, | |
1890 | lucid, cfront, auto}'. 'gnu' is the default. Do a 'set demangle-style foo' | |
1891 | for the list of formats. | |
1892 | ||
1893 | * G++ symbol mangling problem | |
1894 | ||
1895 | Recent versions of gcc have a bug in how they emit debugging information for | |
1896 | C++ methods (when using dbx-style stabs). The file 'gcc.patch' (in this | |
1897 | directory) can be applied to gcc to fix the problem. Alternatively, if you | |
1898 | can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The | |
1899 | usual symptom is difficulty with setting breakpoints on methods. GDB complains | |
1900 | about the method being non-existent. (We believe that version 2.2.2 of GCC has | |
1901 | this problem.) | |
1902 | ||
1903 | * New 'maintenance' command | |
1904 | ||
1905 | All of the commands related to hacking GDB internals have been moved out of | |
1906 | the main command set, and now live behind the 'maintenance' command. This | |
1907 | can also be abbreviated as 'mt'. The following changes were made: | |
1908 | ||
1909 | dump-me -> maintenance dump-me | |
1910 | info all-breakpoints -> maintenance info breakpoints | |
1911 | printmsyms -> maintenance print msyms | |
1912 | printobjfiles -> maintenance print objfiles | |
1913 | printpsyms -> maintenance print psymbols | |
1914 | printsyms -> maintenance print symbols | |
1915 | ||
1916 | The following commands are new: | |
1917 | ||
1918 | maintenance demangle Call internal GDB demangler routine to | |
1919 | demangle a C++ link name and prints the result. | |
1920 | maintenance print type Print a type chain for a given symbol | |
1921 | ||
1922 | * Change to .gdbinit file processing | |
1923 | ||
1924 | We now read the $HOME/.gdbinit file before processing the argv arguments | |
1925 | (e.g. reading symbol files or core files). This allows global parameters to | |
1926 | be set, which will apply during the symbol reading. The ./.gdbinit is still | |
1927 | read after argv processing. | |
1928 | ||
1929 | * New hosts supported | |
1930 | ||
1931 | Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2 | |
1932 | ||
55241689 | 1933 | GNU/Linux support i386-unknown-linux or linux |
c906108c SS |
1934 | |
1935 | We are also including code to support the HP/PA running BSD and HPUX. This | |
1936 | is almost guaranteed not to work, as we didn't have time to test or build it | |
1937 | for this release. We are including it so that the more adventurous (or | |
1938 | masochistic) of you can play with it. We also had major problems with the | |
1939 | fact that the compiler that we got from HP doesn't support the -g option. | |
1940 | It costs extra. | |
1941 | ||
1942 | * New targets supported | |
1943 | ||
1944 | Hitachi H8/300 h8300-hitachi-hms or h8300hms | |
1945 | ||
1946 | * More smarts about finding #include files | |
1947 | ||
1948 | GDB now remembers the compilation directory for all include files, and for | |
1949 | all files from which C is generated (like yacc and lex sources). This | |
1950 | greatly improves GDB's ability to find yacc/lex sources, and include files, | |
1951 | especially if you are debugging your program from a directory different from | |
1952 | the one that contains your sources. | |
1953 | ||
1954 | We also fixed a bug which caused difficulty with listing and setting | |
1955 | breakpoints in include files which contain C code. (In the past, you had to | |
1956 | try twice in order to list an include file that you hadn't looked at before.) | |
1957 | ||
1958 | * Interesting infernals change | |
1959 | ||
1960 | GDB now deals with arbitrary numbers of sections, where the symbols for each | |
1961 | section must be relocated relative to that section's landing place in the | |
1962 | target's address space. This work was needed to support ELF with embedded | |
1963 | stabs used by Solaris-2.0. | |
1964 | ||
1965 | * Bug fixes (of course!) | |
1966 | ||
1967 | There have been loads of fixes for the following things: | |
1968 | mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k, | |
1969 | i960, stabs, DOS(GO32), procfs, etc... | |
1970 | ||
1971 | See the ChangeLog for details. | |
1972 | ||
1973 | *** Changes in GDB-4.5: | |
1974 | ||
1975 | * New machines supported (host and target) | |
1976 | ||
1977 | IBM RS6000 running AIX rs6000-ibm-aix or rs6000 | |
1978 | ||
1979 | SGI Irix-4.x mips-sgi-irix4 or iris4 | |
1980 | ||
1981 | * New malloc package | |
1982 | ||
1983 | GDB now uses a new memory manager called mmalloc, based on gmalloc. | |
1984 | Mmalloc is capable of handling mutiple heaps of memory. It is also | |
1985 | capable of saving a heap to a file, and then mapping it back in later. | |
1986 | This can be used to greatly speedup the startup of GDB by using a | |
1987 | pre-parsed symbol table which lives in a mmalloc managed heap. For | |
1988 | more details, please read mmalloc/mmalloc.texi. | |
1989 | ||
1990 | * info proc | |
1991 | ||
1992 | The 'info proc' command (SVR4 only) has been enhanced quite a bit. See | |
1993 | 'help info proc' for details. | |
1994 | ||
1995 | * MIPS ecoff symbol table format | |
1996 | ||
1997 | The code that reads MIPS symbol table format is now supported on all hosts. | |
1998 | Thanks to MIPS for releasing the sym.h and symconst.h files to make this | |
1999 | possible. | |
2000 | ||
2001 | * File name changes for MS-DOS | |
2002 | ||
2003 | Many files in the config directories have been renamed to make it easier to | |
2004 | support GDB on MS-DOSe systems (which have very restrictive file name | |
2005 | conventions :-( ). MS-DOSe host support (under DJ Delorie's GO32 | |
2006 | environment) is close to working but has some remaining problems. Note | |
2007 | that debugging of DOS programs is not supported, due to limitations | |
2008 | in the ``operating system'', but it can be used to host cross-debugging. | |
2009 | ||
2010 | * Cross byte order fixes | |
2011 | ||
2012 | Many fixes have been made to support cross debugging of Sparc and MIPS | |
2013 | targets from hosts whose byte order differs. | |
2014 | ||
2015 | * New -mapped and -readnow options | |
2016 | ||
2017 | If memory-mapped files are available on your system through the 'mmap' | |
2018 | system call, you can use the -mapped option on the `file' or | |
2019 | `symbol-file' commands to cause GDB to write the symbols from your | |
2020 | program into a reusable file. If the program you are debugging is | |
2021 | called `/path/fred', the mapped symbol file will be `./fred.syms'. | |
2022 | Future GDB debugging sessions will notice the presence of this file, | |
2023 | and will quickly map in symbol information from it, rather than reading | |
2024 | the symbol table from the executable program. Using the '-mapped' | |
2025 | option in a GDB `file' or `symbol-file' command has the same effect as | |
2026 | starting GDB with the '-mapped' command-line option. | |
2027 | ||
2028 | You can cause GDB to read the entire symbol table immediately by using | |
2029 | the '-readnow' option with any of the commands that load symbol table | |
2030 | information (or on the GDB command line). This makes the command | |
2031 | slower, but makes future operations faster. | |
2032 | ||
2033 | The -mapped and -readnow options are typically combined in order to | |
2034 | build a `fred.syms' file that contains complete symbol information. | |
2035 | A simple GDB invocation to do nothing but build a `.syms' file for future | |
2036 | use is: | |
2037 | ||
2038 | gdb -batch -nx -mapped -readnow programname | |
2039 | ||
2040 | The `.syms' file is specific to the host machine on which GDB is run. | |
2041 | It holds an exact image of GDB's internal symbol table. It cannot be | |
2042 | shared across multiple host platforms. | |
2043 | ||
2044 | * longjmp() handling | |
2045 | ||
2046 | GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and | |
2047 | siglongjmp() without losing control. This feature has not yet been ported to | |
2048 | all systems. It currently works on many 386 platforms, all MIPS-based | |
2049 | platforms (SGI, DECstation, etc), and Sun3/4. | |
2050 | ||
2051 | * Solaris 2.0 | |
2052 | ||
2053 | Preliminary work has been put in to support the new Solaris OS from Sun. At | |
2054 | this time, it can control and debug processes, but it is not capable of | |
2055 | reading symbols. | |
2056 | ||
2057 | * Bug fixes | |
2058 | ||
2059 | As always, many many bug fixes. The major areas were with g++, and mipsread. | |
2060 | People using the MIPS-based platforms should experience fewer mysterious | |
2061 | crashes and trashed symbol tables. | |
2062 | ||
2063 | *** Changes in GDB-4.4: | |
2064 | ||
2065 | * New machines supported (host and target) | |
2066 | ||
2067 | SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco | |
2068 | (except core files) | |
2069 | BSD Reno on Vax vax-dec-bsd | |
2070 | Ultrix on Vax vax-dec-ultrix | |
2071 | ||
2072 | * New machines supported (target) | |
2073 | ||
2074 | AMD 29000 embedded, using EBMON a29k-none-none | |
2075 | ||
2076 | * C++ support | |
2077 | ||
2078 | GDB continues to improve its handling of C++. `References' work better. | |
2079 | The demangler has also been improved, and now deals with symbols mangled as | |
2080 | per the Annotated C++ Reference Guide. | |
2081 | ||
2082 | GDB also now handles `stabs' symbol information embedded in MIPS | |
2083 | `ecoff' symbol tables. Since the ecoff format was not easily | |
2084 | extensible to handle new languages such as C++, this appeared to be a | |
2085 | good way to put C++ debugging info into MIPS binaries. This option | |
2086 | will be supported in the GNU C compiler, version 2, when it is | |
2087 | released. | |
2088 | ||
2089 | * New features for SVR4 | |
2090 | ||
2091 | GDB now handles SVR4 shared libraries, in the same fashion as SunOS | |
2092 | shared libraries. Debugging dynamically linked programs should present | |
2093 | only minor differences from debugging statically linked programs. | |
2094 | ||
2095 | The `info proc' command will print out information about any process | |
2096 | on an SVR4 system (including the one you are debugging). At the moment, | |
2097 | it prints the address mappings of the process. | |
2098 | ||
2099 | If you bring up GDB on another SVR4 system, please send mail to | |
2100 | bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any). | |
2101 | ||
2102 | * Better dynamic linking support in SunOS | |
2103 | ||
2104 | Reading symbols from shared libraries which contain debugging symbols | |
2105 | now works properly. However, there remain issues such as automatic | |
2106 | skipping of `transfer vector' code during function calls, which | |
2107 | make it harder to debug code in a shared library, than to debug the | |
2108 | same code linked statically. | |
2109 | ||
2110 | * New Getopt | |
2111 | ||
2112 | GDB is now using the latest `getopt' routines from the FSF. This | |
2113 | version accepts the -- prefix for options with long names. GDB will | |
2114 | continue to accept the old forms (-option and +option) as well. | |
2115 | Various single letter abbreviations for options have been explicity | |
2116 | added to the option table so that they won't get overshadowed in the | |
2117 | future by other options that begin with the same letter. | |
2118 | ||
2119 | * Bugs fixed | |
2120 | ||
2121 | The `cleanup_undefined_types' bug that many of you noticed has been squashed. | |
2122 | Many assorted bugs have been handled. Many more remain to be handled. | |
2123 | See the various ChangeLog files (primarily in gdb and bfd) for details. | |
2124 | ||
2125 | ||
2126 | *** Changes in GDB-4.3: | |
2127 | ||
2128 | * New machines supported (host and target) | |
2129 | ||
2130 | Amiga 3000 running Amix m68k-cbm-svr4 or amix | |
2131 | NCR 3000 386 running SVR4 i386-ncr-svr4 or ncr3000 | |
2132 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 | |
2133 | ||
2134 | * Almost SCO Unix support | |
2135 | ||
2136 | We had hoped to support: | |
2137 | SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco | |
2138 | (except for core file support), but we discovered very late in the release | |
2139 | that it has problems with process groups that render gdb unusable. Sorry | |
2140 | about that. I encourage people to fix it and post the fixes. | |
2141 | ||
2142 | * Preliminary ELF and DWARF support | |
2143 | ||
2144 | GDB can read ELF object files on System V Release 4, and can handle | |
2145 | debugging records for C, in DWARF format, in ELF files. This support | |
2146 | is preliminary. If you bring up GDB on another SVR4 system, please | |
2147 | send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were | |
2148 | reqired (if any). | |
2149 | ||
2150 | * New Readline | |
2151 | ||
2152 | GDB now uses the latest `readline' library. One user-visible change | |
2153 | is that two tabs will list possible command completions, which previously | |
2154 | required typing M-? (meta-question mark, or ESC ?). | |
2155 | ||
2156 | * Bugs fixed | |
2157 | ||
2158 | The `stepi' bug that many of you noticed has been squashed. | |
2159 | Many bugs in C++ have been handled. Many more remain to be handled. | |
2160 | See the various ChangeLog files (primarily in gdb and bfd) for details. | |
2161 | ||
2162 | * State of the MIPS world (in case you wondered): | |
2163 | ||
2164 | GDB can understand the symbol tables emitted by the compilers | |
2165 | supplied by most vendors of MIPS-based machines, including DEC. These | |
2166 | symbol tables are in a format that essentially nobody else uses. | |
2167 | ||
2168 | Some versions of gcc come with an assembler post-processor called | |
2169 | mips-tfile. This program is required if you want to do source-level | |
2170 | debugging of gcc-compiled programs. I believe FSF does not ship | |
2171 | mips-tfile with gcc version 1, but it will eventually come with gcc | |
2172 | version 2. | |
2173 | ||
2174 | Debugging of g++ output remains a problem. g++ version 1.xx does not | |
2175 | really support it at all. (If you're lucky, you should be able to get | |
2176 | line numbers and stack traces to work, but no parameters or local | |
2177 | variables.) With some work it should be possible to improve the | |
2178 | situation somewhat. | |
2179 | ||
2180 | When gcc version 2 is released, you will have somewhat better luck. | |
2181 | However, even then you will get confusing results for inheritance and | |
2182 | methods. | |
2183 | ||
2184 | We will eventually provide full debugging of g++ output on | |
2185 | DECstations. This will probably involve some kind of stabs-in-ecoff | |
2186 | encapulation, but the details have not been worked out yet. | |
2187 | ||
2188 | ||
2189 | *** Changes in GDB-4.2: | |
2190 | ||
2191 | * Improved configuration | |
2192 | ||
2193 | Only one copy of `configure' exists now, and it is not self-modifying. | |
2194 | Porting BFD is simpler. | |
2195 | ||
2196 | * Stepping improved | |
2197 | ||
2198 | The `step' and `next' commands now only stop at the first instruction | |
2199 | of a source line. This prevents the multiple stops that used to occur | |
2200 | in switch statements, for-loops, etc. `Step' continues to stop if a | |
2201 | function that has debugging information is called within the line. | |
2202 | ||
2203 | * Bug fixing | |
2204 | ||
2205 | Lots of small bugs fixed. More remain. | |
2206 | ||
2207 | * New host supported (not target) | |
2208 | ||
2209 | Intel 386 PC clone running Mach i386-none-mach | |
2210 | ||
2211 | ||
2212 | *** Changes in GDB-4.1: | |
2213 | ||
2214 | * Multiple source language support | |
2215 | ||
2216 | GDB now has internal scaffolding to handle several source languages. | |
2217 | It determines the type of each source file from its filename extension, | |
2218 | and will switch expression parsing and number formatting to match the | |
2219 | language of the function in the currently selected stack frame. | |
2220 | You can also specifically set the language to be used, with | |
2221 | `set language c' or `set language modula-2'. | |
2222 | ||
2223 | * GDB and Modula-2 | |
2224 | ||
2225 | GDB now has preliminary support for the GNU Modula-2 compiler, | |
2226 | currently under development at the State University of New York at | |
2227 | Buffalo. Development of both GDB and the GNU Modula-2 compiler will | |
2228 | continue through the fall of 1991 and into 1992. | |
2229 | ||
2230 | Other Modula-2 compilers are currently not supported, and attempting to | |
2231 | debug programs compiled with them will likely result in an error as the | |
2232 | symbol table is read. Feel free to work on it, though! | |
2233 | ||
2234 | There are hooks in GDB for strict type checking and range checking, | |
2235 | in the `Modula-2 philosophy', but they do not currently work. | |
2236 | ||
2237 | * set write on/off | |
2238 | ||
2239 | GDB can now write to executable and core files (e.g. patch | |
2240 | a variable's value). You must turn this switch on, specify | |
2241 | the file ("exec foo" or "core foo"), *then* modify it, e.g. | |
2242 | by assigning a new value to a variable. Modifications take | |
2243 | effect immediately. | |
2244 | ||
2245 | * Automatic SunOS shared library reading | |
2246 | ||
2247 | When you run your program, GDB automatically determines where its | |
2248 | shared libraries (if any) have been loaded, and reads their symbols. | |
2249 | The `share' command is no longer needed. This also works when | |
2250 | examining core files. | |
2251 | ||
2252 | * set listsize | |
2253 | ||
2254 | You can specify the number of lines that the `list' command shows. | |
2255 | The default is 10. | |
2256 | ||
2257 | * New machines supported (host and target) | |
2258 | ||
2259 | SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris | |
2260 | Sony NEWS (68K) running NEWSOS 3.x: m68k-sony-sysv or news | |
2261 | Ultracomputer (29K) running Sym1: a29k-nyu-sym1 or ultra3 | |
2262 | ||
2263 | * New hosts supported (not targets) | |
2264 | ||
2265 | IBM RT/PC: romp-ibm-aix or rtpc | |
2266 | ||
2267 | * New targets supported (not hosts) | |
2268 | ||
2269 | AMD 29000 embedded with COFF a29k-none-coff | |
2270 | AMD 29000 embedded with a.out a29k-none-aout | |
2271 | Ultracomputer remote kernel debug a29k-nyu-kern | |
2272 | ||
2273 | * New remote interfaces | |
2274 | ||
2275 | AMD 29000 Adapt | |
2276 | AMD 29000 Minimon | |
2277 | ||
2278 | ||
2279 | *** Changes in GDB-4.0: | |
2280 | ||
2281 | * New Facilities | |
2282 | ||
2283 | Wide output is wrapped at good places to make the output more readable. | |
2284 | ||
2285 | Gdb now supports cross-debugging from a host machine of one type to a | |
2286 | target machine of another type. Communication with the target system | |
2287 | is over serial lines. The ``target'' command handles connecting to the | |
2288 | remote system; the ``load'' command will download a program into the | |
2289 | remote system. Serial stubs for the m68k and i386 are provided. Gdb | |
2290 | also supports debugging of realtime processes running under VxWorks, | |
2291 | using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger | |
2292 | stub on the target system. | |
2293 | ||
2294 | New CPUs supported include the AMD 29000 and Intel 960. | |
2295 | ||
2296 | GDB now reads object files and symbol tables via a ``binary file'' | |
2297 | library, which allows a single copy of GDB to debug programs of multiple | |
2298 | object file types such as a.out and coff. | |
2299 | ||
2300 | There is now a GDB reference card in "doc/refcard.tex". (Make targets | |
2301 | refcard.dvi and refcard.ps are available to format it). | |
2302 | ||
2303 | ||
2304 | * Control-Variable user interface simplified | |
2305 | ||
2306 | All variables that control the operation of the debugger can be set | |
2307 | by the ``set'' command, and displayed by the ``show'' command. | |
2308 | ||
2309 | For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>. | |
2310 | ``Show prompt'' produces the response: | |
2311 | Gdb's prompt is new-gdb=>. | |
2312 | ||
2313 | What follows are the NEW set commands. The command ``help set'' will | |
2314 | print a complete list of old and new set commands. ``help set FOO'' | |
2315 | will give a longer description of the variable FOO. ``show'' will show | |
2316 | all of the variable descriptions and their current settings. | |
2317 | ||
2318 | confirm on/off: Enables warning questions for operations that are | |
2319 | hard to recover from, e.g. rerunning the program while | |
2320 | it is already running. Default is ON. | |
2321 | ||
2322 | editing on/off: Enables EMACS style command line editing | |
2323 | of input. Previous lines can be recalled with | |
2324 | control-P, the current line can be edited with control-B, | |
2325 | you can search for commands with control-R, etc. | |
2326 | Default is ON. | |
2327 | ||
2328 | history filename NAME: NAME is where the gdb command history | |
2329 | will be stored. The default is .gdb_history, | |
2330 | or the value of the environment variable | |
2331 | GDBHISTFILE. | |
2332 | ||
2333 | history size N: The size, in commands, of the command history. The | |
2334 | default is 256, or the value of the environment variable | |
2335 | HISTSIZE. | |
2336 | ||
2337 | history save on/off: If this value is set to ON, the history file will | |
2338 | be saved after exiting gdb. If set to OFF, the | |
2339 | file will not be saved. The default is OFF. | |
2340 | ||
2341 | history expansion on/off: If this value is set to ON, then csh-like | |
2342 | history expansion will be performed on | |
2343 | command line input. The default is OFF. | |
2344 | ||
2345 | radix N: Sets the default radix for input and output. It can be set | |
2346 | to 8, 10, or 16. Note that the argument to "radix" is interpreted | |
2347 | in the current radix, so "set radix 10" is always a no-op. | |
2348 | ||
2349 | height N: This integer value is the number of lines on a page. Default | |
2350 | is 24, the current `stty rows'' setting, or the ``li#'' | |
2351 | setting from the termcap entry matching the environment | |
2352 | variable TERM. | |
2353 | ||
2354 | width N: This integer value is the number of characters on a line. | |
2355 | Default is 80, the current `stty cols'' setting, or the ``co#'' | |
2356 | setting from the termcap entry matching the environment | |
2357 | variable TERM. | |
2358 | ||
2359 | Note: ``set screensize'' is obsolete. Use ``set height'' and | |
2360 | ``set width'' instead. | |
2361 | ||
2362 | print address on/off: Print memory addresses in various command displays, | |
2363 | such as stack traces and structure values. Gdb looks | |
2364 | more ``symbolic'' if you turn this off; it looks more | |
2365 | ``machine level'' with it on. Default is ON. | |
2366 | ||
2367 | print array on/off: Prettyprint arrays. New convenient format! Default | |
2368 | is OFF. | |
2369 | ||
2370 | print demangle on/off: Print C++ symbols in "source" form if on, | |
2371 | "raw" form if off. | |
2372 | ||
2373 | print asm-demangle on/off: Same, for assembler level printouts | |
2374 | like instructions. | |
2375 | ||
2376 | print vtbl on/off: Prettyprint C++ virtual function tables. Default is OFF. | |
2377 | ||
2378 | ||
2379 | * Support for Epoch Environment. | |
2380 | ||
2381 | The epoch environment is a version of Emacs v18 with windowing. One | |
2382 | new command, ``inspect'', is identical to ``print'', except that if you | |
2383 | are running in the epoch environment, the value is printed in its own | |
2384 | window. | |
2385 | ||
2386 | ||
2387 | * Support for Shared Libraries | |
2388 | ||
2389 | GDB can now debug programs and core files that use SunOS shared libraries. | |
2390 | Symbols from a shared library cannot be referenced | |
2391 | before the shared library has been linked with the program (this | |
2392 | happens after you type ``run'' and before the function main() is entered). | |
2393 | At any time after this linking (including when examining core files | |
2394 | from dynamically linked programs), gdb reads the symbols from each | |
2395 | shared library when you type the ``sharedlibrary'' command. | |
2396 | It can be abbreviated ``share''. | |
2397 | ||
2398 | sharedlibrary REGEXP: Load shared object library symbols for files | |
2399 | matching a unix regular expression. No argument | |
2400 | indicates to load symbols for all shared libraries. | |
2401 | ||
2402 | info sharedlibrary: Status of loaded shared libraries. | |
2403 | ||
2404 | ||
2405 | * Watchpoints | |
2406 | ||
2407 | A watchpoint stops execution of a program whenever the value of an | |
2408 | expression changes. Checking for this slows down execution | |
2409 | tremendously whenever you are in the scope of the expression, but is | |
2410 | quite useful for catching tough ``bit-spreader'' or pointer misuse | |
2411 | problems. Some machines such as the 386 have hardware for doing this | |
2412 | more quickly, and future versions of gdb will use this hardware. | |
2413 | ||
2414 | watch EXP: Set a watchpoint (breakpoint) for an expression. | |
2415 | ||
2416 | info watchpoints: Information about your watchpoints. | |
2417 | ||
2418 | delete N: Deletes watchpoint number N (same as breakpoints). | |
2419 | disable N: Temporarily turns off watchpoint number N (same as breakpoints). | |
2420 | enable N: Re-enables watchpoint number N (same as breakpoints). | |
2421 | ||
2422 | ||
2423 | * C++ multiple inheritance | |
2424 | ||
2425 | When used with a GCC version 2 compiler, GDB supports multiple inheritance | |
2426 | for C++ programs. | |
2427 | ||
2428 | * C++ exception handling | |
2429 | ||
2430 | Gdb now supports limited C++ exception handling. Besides the existing | |
2431 | ability to breakpoint on an exception handler, gdb can breakpoint on | |
2432 | the raising of an exception (before the stack is peeled back to the | |
2433 | handler's context). | |
2434 | ||
2435 | catch FOO: If there is a FOO exception handler in the dynamic scope, | |
2436 | set a breakpoint to catch exceptions which may be raised there. | |
2437 | Multiple exceptions (``catch foo bar baz'') may be caught. | |
2438 | ||
2439 | info catch: Lists all exceptions which may be caught in the | |
2440 | current stack frame. | |
2441 | ||
2442 | ||
2443 | * Minor command changes | |
2444 | ||
2445 | The command ``call func (arg, arg, ...)'' now acts like the print | |
2446 | command, except it does not print or save a value if the function's result | |
2447 | is void. This is similar to dbx usage. | |
2448 | ||
2449 | The ``up'' and ``down'' commands now always print the frame they end up | |
2450 | at; ``up-silently'' and `down-silently'' can be used in scripts to change | |
2451 | frames without printing. | |
2452 | ||
2453 | * New directory command | |
2454 | ||
2455 | 'dir' now adds directories to the FRONT of the source search path. | |
2456 | The path starts off empty. Source files that contain debug information | |
2457 | about the directory in which they were compiled can be found even | |
2458 | with an empty path; Sun CC and GCC include this information. If GDB can't | |
2459 | find your source file in the current directory, type "dir .". | |
2460 | ||
2461 | * Configuring GDB for compilation | |
2462 | ||
2463 | For normal use, type ``./configure host''. See README or gdb.texinfo | |
2464 | for more details. | |
2465 | ||
2466 | GDB now handles cross debugging. If you are remotely debugging between | |
2467 | two different machines, type ``./configure host -target=targ''. | |
2468 | Host is the machine where GDB will run; targ is the machine | |
2469 | where the program that you are debugging will run. |