Commit | Line | Data |
---|---|---|
c906108c SS |
1 | What has changed in GDB? |
2 | (Organized release by release) | |
3 | ||
53e5f3cf AS |
4 | *** Changes since GDB 6.4 |
5 | ||
6 | * New commands | |
7 | ||
8 | init-if-undefined Initialize a convenience variable, but | |
9 | only if it doesn't already have a value. | |
10 | ||
ac264b3b MS |
11 | The following commands are presently only implemented for native GNU/Linux: |
12 | ||
13 | checkpoint Save a snapshot of the program state. | |
14 | ||
15 | restart <n> Return the program state to a | |
16 | previously saved state. | |
17 | ||
18 | info checkpoints List currently saved checkpoints. | |
19 | ||
20 | delete-checkpoint <n> Delete a previously saved checkpoint. | |
21 | ||
22 | set|show detach-on-fork Tell gdb whether to detach from a newly | |
23 | forked process, or to keep debugging it. | |
24 | ||
25 | info forks List forks of the user program that | |
26 | are available to be debugged. | |
27 | ||
28 | fork <n> Switch to debugging one of several | |
29 | forks of the user program that are | |
30 | available to be debugged. | |
31 | ||
32 | delete-fork <n> Delete a fork from the list of forks | |
33 | that are available to be debugged (and | |
34 | kill the forked process). | |
35 | ||
36 | detach-fork <n> Delete a fork from the list of forks | |
37 | that are available to be debugged (and | |
38 | allow the process to continue). | |
39 | ||
3950dc3f NS |
40 | * New architecture |
41 | ||
42 | Morpho Technologies ms2 ms1-elf | |
43 | ||
0ea3f30e DJ |
44 | * Improved Windows host support |
45 | ||
46 | GDB now builds as a cross debugger hosted on i686-mingw32, including | |
47 | native console support, and remote communications using either | |
48 | network sockets or serial ports. | |
49 | ||
acab6ab2 MM |
50 | * REMOVED features |
51 | ||
52 | The ARM rdi-share module. | |
53 | ||
53e5f3cf | 54 | *** Changes in GDB 6.4 |
156a53ca | 55 | |
e0ecbda1 MK |
56 | * New native configurations |
57 | ||
02a677ac | 58 | OpenBSD/arm arm*-*-openbsd* |
e0ecbda1 MK |
59 | OpenBSD/mips64 mips64-*-openbsd* |
60 | ||
d64a6579 KB |
61 | * New targets |
62 | ||
63 | Morpho Technologies ms1 ms1-elf | |
64 | ||
b33a6190 AS |
65 | * New command line options |
66 | ||
67 | --batch-silent As for --batch, but totally silent. | |
68 | --return-child-result The debugger will exist with the same value | |
69 | the child (debugged) program exited with. | |
70 | --eval-command COMMAND, -ex COMMAND | |
71 | Execute a single GDB CLI command. This may be | |
72 | specified multiple times and in conjunction | |
73 | with the --command (-x) option. | |
74 | ||
11dced61 AC |
75 | * Deprecated commands removed |
76 | ||
77 | The following commands, that were deprecated in 2000, have been | |
78 | removed: | |
79 | ||
80 | Command Replacement | |
81 | set|show arm disassembly-flavor set|show arm disassembler | |
82 | othernames set arm disassembler | |
83 | set|show remotedebug set|show debug remote | |
84 | set|show archdebug set|show debug arch | |
85 | set|show eventdebug set|show debug event | |
86 | regs info registers | |
87 | ||
6fe85783 MK |
88 | * New BSD user-level threads support |
89 | ||
90 | It is now possible to debug programs using the user-level threads | |
91 | library on OpenBSD and FreeBSD. Currently supported (target) | |
92 | configurations are: | |
93 | ||
94 | FreeBSD/amd64 x86_64-*-freebsd* | |
95 | FreeBSD/i386 i386-*-freebsd* | |
96 | OpenBSD/i386 i386-*-openbsd* | |
97 | ||
98 | Note that the new kernel threads libraries introduced in FreeBSD 5.x | |
99 | are not yet supported. | |
100 | ||
5260ca71 MS |
101 | * New support for Matsushita MN10300 w/sim added |
102 | (Work in progress). mn10300-elf. | |
103 | ||
e84ecc99 AC |
104 | * REMOVED configurations and files |
105 | ||
106 | VxWorks and the XDR protocol *-*-vxworks | |
9445aa30 | 107 | Motorola MCORE mcore-*-* |
9445aa30 | 108 | National Semiconductor NS32000 ns32k-*-* |
156a53ca | 109 | |
31e35378 JB |
110 | * New "set print array-indexes" command |
111 | ||
112 | After turning this setting "on", GDB prints the index of each element | |
113 | when displaying arrays. The default is "off" to preserve the previous | |
114 | behavior. | |
115 | ||
e85e5c83 MK |
116 | * VAX floating point support |
117 | ||
118 | GDB now supports the not-quite-ieee VAX F and D floating point formats. | |
119 | ||
d91e9901 AS |
120 | * User-defined command support |
121 | ||
122 | In addition to using $arg0..$arg9 for argument passing, it is now possible | |
123 | to use $argc to determine now many arguments have been passed. See the | |
124 | section on user-defined commands in the user manual for more information. | |
125 | ||
f2cb65ca MC |
126 | *** Changes in GDB 6.3: |
127 | ||
f47b1503 AS |
128 | * New command line option |
129 | ||
130 | GDB now accepts -l followed by a number to set the timeout for remote | |
131 | debugging. | |
132 | ||
f2cb65ca MC |
133 | * GDB works with GCC -feliminate-dwarf2-dups |
134 | ||
135 | GDB now supports a more compact representation of DWARF-2 debug | |
136 | information using DW_FORM_ref_addr references. These are produced | |
137 | by GCC with the option -feliminate-dwarf2-dups and also by some | |
138 | proprietary compilers. With GCC, you must use GCC 3.3.4 or later | |
139 | to use -feliminate-dwarf2-dups. | |
860660cb | 140 | |
d08c0230 AC |
141 | * Internationalization |
142 | ||
143 | When supported by the host system, GDB will be built with | |
144 | internationalization (libintl). The task of marking up the sources is | |
145 | continued, we're looking forward to our first translation. | |
146 | ||
117ea3cf PH |
147 | * Ada |
148 | ||
149 | Initial support for debugging programs compiled with the GNAT | |
150 | implementation of the Ada programming language has been integrated | |
151 | into GDB. In this release, support is limited to expression evaluation. | |
152 | ||
d08c0230 AC |
153 | * New native configurations |
154 | ||
155 | GNU/Linux/m32r m32r-*-linux-gnu | |
156 | ||
157 | * Remote 'p' packet | |
158 | ||
159 | GDB's remote protocol now includes support for the 'p' packet. This | |
160 | packet is used to fetch individual registers from a remote inferior. | |
161 | ||
162 | * END-OF-LIFE registers[] compatibility module | |
163 | ||
164 | GDB's internal register infrastructure has been completely rewritten. | |
165 | The new infrastructure making possible the implementation of key new | |
166 | features including 32x64 (e.g., 64-bit amd64 GDB debugging a 32-bit | |
167 | i386 application). | |
168 | ||
169 | GDB 6.3 will be the last release to include the the registers[] | |
170 | compatibility module that allowed out-of-date configurations to | |
171 | continue to work. This change directly impacts the following | |
172 | configurations: | |
173 | ||
174 | hppa-*-hpux | |
175 | ia64-*-aix | |
176 | mips-*-irix* | |
177 | *-*-lynx | |
178 | mips-*-linux-gnu | |
179 | sds protocol | |
180 | xdr protocol | |
181 | powerpc bdm protocol | |
182 | ||
183 | Unless there is activity to revive these configurations, they will be | |
184 | made OBSOLETE in GDB 6.4, and REMOVED from GDB 6.5. | |
185 | ||
186 | * OBSOLETE configurations and files | |
187 | ||
188 | Configurations that have been declared obsolete in this release have | |
189 | been commented out. Unless there is activity to revive these | |
190 | configurations, the next release of GDB will have their sources | |
191 | permanently REMOVED. | |
192 | ||
193 | h8300-*-* | |
194 | mcore-*-* | |
195 | mn10300-*-* | |
196 | ns32k-*-* | |
197 | sh64-*-* | |
198 | v850-*-* | |
199 | ||
ebb7c577 AC |
200 | *** Changes in GDB 6.2.1: |
201 | ||
202 | * MIPS `break main; run' gave an heuristic-fence-post warning | |
203 | ||
204 | When attempting to run even a simple program, a warning about | |
205 | heuristic-fence-post being hit would be reported. This problem has | |
206 | been fixed. | |
207 | ||
208 | * MIPS IRIX 'long double' crashed GDB | |
209 | ||
210 | When examining a long double variable, GDB would get a segmentation | |
211 | fault. The crash has been fixed (but GDB 6.2 cannot correctly examine | |
212 | IRIX long double values). | |
213 | ||
214 | * VAX and "next" | |
215 | ||
216 | A bug in the VAX stack code was causing problems with the "next" | |
217 | command. This problem has been fixed. | |
218 | ||
860660cb | 219 | *** Changes in GDB 6.2: |
faae5abe | 220 | |
0dea2468 AC |
221 | * Fix for ``many threads'' |
222 | ||
223 | On GNU/Linux systems that use the NPTL threads library, a program | |
224 | rapidly creating and deleting threads would confuse GDB leading to the | |
225 | error message: | |
226 | ||
227 | ptrace: No such process. | |
228 | thread_db_get_info: cannot get thread info: generic error | |
229 | ||
230 | This problem has been fixed. | |
231 | ||
2c07db7a AC |
232 | * "-async" and "-noasync" options removed. |
233 | ||
234 | Support for the broken "-noasync" option has been removed (it caused | |
235 | GDB to dump core). | |
236 | ||
c23968a2 JB |
237 | * New ``start'' command. |
238 | ||
239 | This command runs the program until the begining of the main procedure. | |
240 | ||
71009278 MK |
241 | * New BSD Kernel Data Access Library (libkvm) interface |
242 | ||
243 | Using ``target kvm'' it is now possible to debug kernel core dumps and | |
244 | live kernel memory images on various FreeBSD, NetBSD and OpenBSD | |
245 | platforms. Currently supported (native-only) configurations are: | |
246 | ||
247 | FreeBSD/amd64 x86_64-*-freebsd* | |
248 | FreeBSD/i386 i?86-*-freebsd* | |
249 | NetBSD/i386 i?86-*-netbsd* | |
250 | NetBSD/m68k m68*-*-netbsd* | |
251 | NetBSD/sparc sparc-*-netbsd* | |
252 | OpenBSD/amd64 x86_64-*-openbsd* | |
253 | OpenBSD/i386 i?86-*-openbsd* | |
254 | OpenBSD/m68k m68*-openbsd* | |
255 | OpenBSD/sparc sparc-*-openbsd* | |
256 | ||
3c0b7db2 AC |
257 | * Signal trampoline code overhauled |
258 | ||
259 | Many generic problems with GDB's signal handling code have been fixed. | |
260 | These include: backtraces through non-contiguous stacks; recognition | |
261 | of sa_sigaction signal trampolines; backtrace from a NULL pointer | |
262 | call; backtrace through a signal trampoline; step into and out of | |
263 | signal handlers; and single-stepping in the signal trampoline. | |
264 | ||
73cc75f3 AC |
265 | Please note that kernel bugs are a limiting factor here. These |
266 | features have been shown to work on an s390 GNU/Linux system that | |
267 | include a 2.6.8-rc1 kernel. Ref PR breakpoints/1702. | |
3c0b7db2 | 268 | |
7243600a BF |
269 | * Cygwin support for DWARF 2 added. |
270 | ||
6f606e1c MK |
271 | * New native configurations |
272 | ||
97dc871c | 273 | GNU/Linux/hppa hppa*-*-linux* |
0e56aeaf | 274 | OpenBSD/hppa hppa*-*-openbsd* |
bf2ca189 MK |
275 | OpenBSD/m68k m68*-*-openbsd* |
276 | OpenBSD/m88k m88*-*-openbsd* | |
d195bc9f | 277 | OpenBSD/powerpc powerpc-*-openbsd* |
6f606e1c | 278 | NetBSD/vax vax-*-netbsd* |
9f076e7a | 279 | OpenBSD/vax vax-*-openbsd* |
6f606e1c | 280 | |
a1b461bf AC |
281 | * END-OF-LIFE frame compatibility module |
282 | ||
283 | GDB's internal frame infrastructure has been completely rewritten. | |
284 | The new infrastructure making it possible to support key new features | |
285 | including DWARF 2 Call Frame Information. To aid in the task of | |
286 | migrating old configurations to this new infrastructure, a | |
287 | compatibility module, that allowed old configurations to continue to | |
288 | work, was also included. | |
289 | ||
290 | GDB 6.2 will be the last release to include this frame compatibility | |
291 | module. This change directly impacts the following configurations: | |
292 | ||
293 | h8300-*-* | |
294 | mcore-*-* | |
295 | mn10300-*-* | |
296 | ns32k-*-* | |
297 | sh64-*-* | |
298 | v850-*-* | |
299 | xstormy16-*-* | |
300 | ||
301 | Unless there is activity to revive these configurations, they will be | |
302 | made OBSOLETE in GDB 6.3, and REMOVED from GDB 6.4. | |
303 | ||
3c7012f5 AC |
304 | * REMOVED configurations and files |
305 | ||
306 | Sun 3, running SunOS 3 m68*-*-sunos3* | |
307 | Sun 3, running SunOS 4 m68*-*-sunos4* | |
308 | Sun 2, running SunOS 3 m68000-*-sunos3* | |
309 | Sun 2, running SunOS 4 m68000-*-sunos4* | |
310 | Motorola 680x0 running LynxOS m68*-*-lynxos* | |
311 | AT&T 3b1/Unix pc m68*-att-* | |
312 | Bull DPX2 (68k, System V release 3) m68*-bull-sysv* | |
313 | decstation mips-dec-* mips-little-* | |
314 | riscos mips-*-riscos* mips-*-sysv* | |
315 | sonymips mips-sony-* | |
316 | sysv mips*-*-sysv4* (IRIX 5/6 not included) | |
317 | ||
e5fe55f7 AC |
318 | *** Changes in GDB 6.1.1: |
319 | ||
320 | * TUI (Text-mode User Interface) built-in (also included in GDB 6.1) | |
321 | ||
322 | The TUI (Text-mode User Interface) is now built as part of a default | |
323 | GDB configuration. It is enabled by either selecting the TUI with the | |
324 | command line option "-i=tui" or by running the separate "gdbtui" | |
325 | program. For more information on the TUI, see the manual "Debugging | |
326 | with GDB". | |
327 | ||
328 | * Pending breakpoint support (also included in GDB 6.1) | |
329 | ||
330 | Support has been added to allow you to specify breakpoints in shared | |
331 | libraries that have not yet been loaded. If a breakpoint location | |
332 | cannot be found, and the "breakpoint pending" option is set to auto, | |
333 | GDB queries you if you wish to make the breakpoint pending on a future | |
334 | shared-library load. If and when GDB resolves the breakpoint symbol, | |
335 | the pending breakpoint is removed as one or more regular breakpoints | |
336 | are created. | |
337 | ||
338 | Pending breakpoints are very useful for GCJ Java debugging. | |
339 | ||
340 | * Fixed ISO-C build problems | |
341 | ||
342 | The files bfd/elf-bfd.h, gdb/dictionary.c and gdb/types.c contained | |
343 | non ISO-C code that stopped them being built using a more strict ISO-C | |
344 | compiler (e.g., IBM's C compiler). | |
345 | ||
346 | * Fixed build problem on IRIX 5 | |
347 | ||
348 | Due to header problems with <sys/proc.h>, the file gdb/proc-api.c | |
349 | wasn't able to compile compile on an IRIX 5 system. | |
350 | ||
351 | * Added execute permission to gdb/gdbserver/configure | |
352 | ||
353 | The shell script gdb/testsuite/gdb.stabs/configure lacked execute | |
354 | permission. This bug would cause configure to fail on a number of | |
355 | systems (Solaris, IRIX). Ref: server/519. | |
356 | ||
357 | * Fixed build problem on hpux2.0w-hp-hpux11.00 using the HP ANSI C compiler | |
358 | ||
359 | Older HPUX ANSI C compilers did not accept variable array sizes. somsolib.c | |
360 | has been updated to use constant array sizes. | |
361 | ||
362 | * Fixed a panic in the DWARF Call Frame Info code on Solaris 2.7 | |
363 | ||
364 | GCC 3.3.2, on Solaris 2.7, includes the DW_EH_PE_funcrel encoding in | |
365 | its generated DWARF Call Frame Info. This encoding was causing GDB to | |
366 | panic, that panic has been fixed. Ref: gdb/1628. | |
367 | ||
368 | * Fixed a problem when examining parameters in shared library code. | |
369 | ||
370 | When examining parameters in optimized shared library code generated | |
371 | by a mainline GCC, GDB would incorrectly report ``Variable "..." is | |
372 | not available''. GDB now correctly displays the variable's value. | |
373 | ||
faae5abe | 374 | *** Changes in GDB 6.1: |
f2c06f52 | 375 | |
9175c9a3 MC |
376 | * Removed --with-mmalloc |
377 | ||
378 | Support for the mmalloc memory manager has been removed, as it | |
379 | conflicted with the internal gdb byte cache. | |
380 | ||
3cc87ec0 MK |
381 | * Changes in AMD64 configurations |
382 | ||
383 | The AMD64 target now includes the %cs and %ss registers. As a result | |
384 | the AMD64 remote protocol has changed; this affects the floating-point | |
385 | and SSE registers. If you rely on those registers for your debugging, | |
386 | you should upgrade gdbserver on the remote side. | |
387 | ||
f0424ef6 MK |
388 | * Revised SPARC target |
389 | ||
390 | The SPARC target has been completely revised, incorporating the | |
391 | FreeBSD/sparc64 support that was added for GDB 6.0. As a result | |
03cebad2 MK |
392 | support for LynxOS and SunOS 4 has been dropped. Calling functions |
393 | from within GDB on operating systems with a non-executable stack | |
394 | (Solaris, OpenBSD) now works. | |
f0424ef6 | 395 | |
59659be2 ILT |
396 | * New C++ demangler |
397 | ||
398 | GDB has a new C++ demangler which does a better job on the mangled | |
399 | names generated by current versions of g++. It also runs faster, so | |
400 | with this and other changes gdb should now start faster on large C++ | |
401 | programs. | |
402 | ||
9e08b29b DJ |
403 | * DWARF 2 Location Expressions |
404 | ||
405 | GDB support for location expressions has been extended to support function | |
406 | arguments and frame bases. Older versions of GDB could crash when they | |
407 | encountered these. | |
408 | ||
8dfe8985 DC |
409 | * C++ nested types and namespaces |
410 | ||
411 | GDB's support for nested types and namespaces in C++ has been | |
412 | improved, especially if you use the DWARF 2 debugging format. (This | |
413 | is the default for recent versions of GCC on most platforms.) | |
414 | Specifically, if you have a class "Inner" defined within a class or | |
415 | namespace "Outer", then GDB realizes that the class's name is | |
416 | "Outer::Inner", not simply "Inner". This should greatly reduce the | |
417 | frequency of complaints about not finding RTTI symbols. In addition, | |
418 | if you are stopped at inside of a function defined within a namespace, | |
419 | GDB modifies its name lookup accordingly. | |
420 | ||
cced5e27 MK |
421 | * New native configurations |
422 | ||
423 | NetBSD/amd64 x86_64-*-netbsd* | |
27d1e716 | 424 | OpenBSD/amd64 x86_64-*-openbsd* |
2031c21a | 425 | OpenBSD/alpha alpha*-*-openbsd* |
f2cab569 MK |
426 | OpenBSD/sparc sparc-*-openbsd* |
427 | OpenBSD/sparc64 sparc64-*-openbsd* | |
cced5e27 | 428 | |
b4b4b794 KI |
429 | * New debugging protocols |
430 | ||
431 | M32R with SDI protocol m32r-*-elf* | |
432 | ||
7989c619 AC |
433 | * "set prompt-escape-char" command deleted. |
434 | ||
435 | The command "set prompt-escape-char" has been deleted. This command, | |
436 | and its very obscure effet on GDB's prompt, was never documented, | |
437 | tested, nor mentioned in the NEWS file. | |
438 | ||
5994185b AC |
439 | * OBSOLETE configurations and files |
440 | ||
441 | Configurations that have been declared obsolete in this release have | |
442 | been commented out. Unless there is activity to revive these | |
443 | configurations, the next release of GDB will have their sources | |
444 | permanently REMOVED. | |
445 | ||
446 | Sun 3, running SunOS 3 m68*-*-sunos3* | |
447 | Sun 3, running SunOS 4 m68*-*-sunos4* | |
448 | Sun 2, running SunOS 3 m68000-*-sunos3* | |
449 | Sun 2, running SunOS 4 m68000-*-sunos4* | |
450 | Motorola 680x0 running LynxOS m68*-*-lynxos* | |
451 | AT&T 3b1/Unix pc m68*-att-* | |
452 | Bull DPX2 (68k, System V release 3) m68*-bull-sysv* | |
0748d941 AC |
453 | decstation mips-dec-* mips-little-* |
454 | riscos mips-*-riscos* mips-*-sysv* | |
455 | sonymips mips-sony-* | |
456 | sysv mips*-*-sysv4* (IRIX 5/6 not included) | |
5994185b | 457 | |
0ddabb4c AC |
458 | * REMOVED configurations and files |
459 | ||
460 | SGI Irix-4.x mips-sgi-irix4 or iris4 | |
461 | SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris | |
4a8269c0 AC |
462 | Z8000 simulator z8k-zilog-none or z8ksim |
463 | Matsushita MN10200 w/simulator mn10200-*-* | |
464 | H8/500 simulator h8500-hitachi-hms or h8500hms | |
465 | HP/PA running BSD hppa*-*-bsd* | |
466 | HP/PA running OSF/1 hppa*-*-osf* | |
467 | HP/PA Pro target hppa*-*-pro* | |
468 | PMAX (MIPS) running Mach 3.0 mips*-*-mach3* | |
cf7c5c23 | 469 | 386BSD i[3456]86-*-bsd* |
4a8269c0 AC |
470 | Sequent family i[3456]86-sequent-sysv4* |
471 | i[3456]86-sequent-sysv* | |
472 | i[3456]86-sequent-bsd* | |
f0424ef6 MK |
473 | SPARC running LynxOS sparc-*-lynxos* |
474 | SPARC running SunOS 4 sparc-*-sunos4* | |
4a8269c0 AC |
475 | Tsqware Sparclet sparclet-*-* |
476 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
0ddabb4c | 477 | |
c7f1390e DJ |
478 | *** Changes in GDB 6.0: |
479 | ||
1fe43d45 AC |
480 | * Objective-C |
481 | ||
482 | Support for debugging the Objective-C programming language has been | |
483 | integrated into GDB. | |
484 | ||
e6beb428 AC |
485 | * New backtrace mechanism (includes DWARF 2 Call Frame Information). |
486 | ||
487 | DWARF 2's Call Frame Information makes available compiler generated | |
488 | information that more exactly describes the program's run-time stack. | |
489 | By using this information, GDB is able to provide more robust stack | |
490 | backtraces. | |
491 | ||
492 | The i386, amd64 (nee, x86-64), Alpha, m68hc11, ia64, and m32r targets | |
493 | have been updated to use a new backtrace mechanism which includes | |
494 | DWARF 2 CFI support. | |
495 | ||
496 | * Hosted file I/O. | |
497 | ||
498 | GDB's remote protocol has been extended to include support for hosted | |
499 | file I/O (where the remote target uses GDB's file system). See GDB's | |
500 | remote protocol documentation for details. | |
501 | ||
502 | * All targets using the new architecture framework. | |
503 | ||
504 | All of GDB's targets have been updated to use the new internal | |
505 | architecture framework. The way is now open for future GDB releases | |
506 | to include cross-architecture native debugging support (i386 on amd64, | |
507 | ppc32 on ppc64). | |
508 | ||
509 | * GNU/Linux's Thread Local Storage (TLS) | |
510 | ||
511 | GDB now includes support for for the GNU/Linux implementation of | |
512 | per-thread variables. | |
513 | ||
514 | * GNU/Linux's Native POSIX Thread Library (NPTL) | |
515 | ||
516 | GDB's thread code has been updated to work with either the new | |
517 | GNU/Linux NPTL thread library or the older "LinuxThreads" library. | |
518 | ||
519 | * Separate debug info. | |
520 | ||
521 | GDB, in conjunction with BINUTILS, now supports a mechanism for | |
522 | automatically loading debug information from a separate file. Instead | |
523 | of shipping full debug and non-debug versions of system libraries, | |
524 | system integrators can now instead ship just the stripped libraries | |
525 | and optional debug files. | |
526 | ||
527 | * DWARF 2 Location Expressions | |
528 | ||
529 | DWARF 2 Location Expressions allow the compiler to more completely | |
530 | describe the location of variables (even in optimized code) to the | |
531 | debugger. | |
532 | ||
533 | GDB now includes preliminary support for location expressions (support | |
534 | for DW_OP_piece is still missing). | |
535 | ||
536 | * Java | |
537 | ||
538 | A number of long standing bugs that caused GDB to die while starting a | |
539 | Java application have been fixed. GDB's Java support is now | |
540 | considered "useable". | |
541 | ||
85f8f974 DJ |
542 | * GNU/Linux support for fork, vfork, and exec. |
543 | ||
544 | The "catch fork", "catch exec", "catch vfork", and "set follow-fork-mode" | |
545 | commands are now implemented for GNU/Linux. They require a 2.5.x or later | |
546 | kernel. | |
547 | ||
0fac0b41 DJ |
548 | * GDB supports logging output to a file |
549 | ||
550 | There are two new commands, "set logging" and "show logging", which can be | |
551 | used to capture GDB's output to a file. | |
f2c06f52 | 552 | |
6ad8ae5c DJ |
553 | * The meaning of "detach" has changed for gdbserver |
554 | ||
555 | The "detach" command will now resume the application, as documented. To | |
556 | disconnect from gdbserver and leave it stopped, use the new "disconnect" | |
557 | command. | |
558 | ||
e286caf2 | 559 | * d10v, m68hc11 `regs' command deprecated |
5f601589 AC |
560 | |
561 | The `info registers' command has been updated so that it displays the | |
562 | registers using a format identical to the old `regs' command. | |
563 | ||
d28f9cdf DJ |
564 | * Profiling support |
565 | ||
566 | A new command, "maint set profile on/off", has been added. This command can | |
567 | be used to enable or disable profiling while running GDB, to profile a | |
568 | session or a set of commands. In addition there is a new configure switch, | |
569 | "--enable-profiling", which will cause GDB to be compiled with profiling | |
570 | data, for more informative profiling results. | |
571 | ||
da0f9dcd AC |
572 | * Default MI syntax changed to "mi2". |
573 | ||
574 | The default MI (machine interface) syntax, enabled by the command line | |
575 | option "-i=mi", has been changed to "mi2". The previous MI syntax, | |
b68767c1 | 576 | "mi1", can be enabled by specifying the option "-i=mi1". |
da0f9dcd AC |
577 | |
578 | Support for the original "mi0" syntax (included in GDB 5.0) has been | |
579 | removed. | |
580 | ||
fb9b6b35 JJ |
581 | Fix for gdb/192: removed extraneous space when displaying frame level. |
582 | Fix for gdb/672: update changelist is now output in mi list format. | |
583 | Fix for gdb/702: a -var-assign that updates the value now shows up | |
584 | in a subsequent -var-update. | |
585 | ||
954a4db8 MK |
586 | * New native configurations. |
587 | ||
588 | FreeBSD/amd64 x86_64-*-freebsd* | |
589 | ||
6760f9e6 JB |
590 | * Multi-arched targets. |
591 | ||
b4263afa | 592 | HP/PA HPUX11 hppa*-*-hpux* |
85a453d5 | 593 | Renesas M32R/D w/simulator m32r-*-elf* |
6760f9e6 | 594 | |
1b831c93 AC |
595 | * OBSOLETE configurations and files |
596 | ||
597 | Configurations that have been declared obsolete in this release have | |
598 | been commented out. Unless there is activity to revive these | |
599 | configurations, the next release of GDB will have their sources | |
600 | permanently REMOVED. | |
601 | ||
8b0e5691 | 602 | Z8000 simulator z8k-zilog-none or z8ksim |
67f16606 | 603 | Matsushita MN10200 w/simulator mn10200-*-* |
fd2299bd | 604 | H8/500 simulator h8500-hitachi-hms or h8500hms |
56056df7 AC |
605 | HP/PA running BSD hppa*-*-bsd* |
606 | HP/PA running OSF/1 hppa*-*-osf* | |
607 | HP/PA Pro target hppa*-*-pro* | |
78c43945 | 608 | PMAX (MIPS) running Mach 3.0 mips*-*-mach3* |
2fbce691 AC |
609 | Sequent family i[3456]86-sequent-sysv4* |
610 | i[3456]86-sequent-sysv* | |
611 | i[3456]86-sequent-bsd* | |
f81824a9 AC |
612 | Tsqware Sparclet sparclet-*-* |
613 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
fd2299bd | 614 | |
5835abe7 NC |
615 | * REMOVED configurations and files |
616 | ||
617 | V850EA ISA | |
1b831c93 AC |
618 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
619 | IBM AIX PS/2 i[3456]86-*-aix | |
620 | i386 running Mach 3.0 i[3456]86-*-mach3* | |
621 | i386 running Mach i[3456]86-*-mach* | |
622 | i386 running OSF/1 i[3456]86-*osf1mk* | |
623 | HP/Apollo 68k Family m68*-apollo*-sysv*, | |
624 | m68*-apollo*-bsd*, | |
625 | m68*-hp-bsd*, m68*-hp-hpux* | |
626 | Argonaut Risc Chip (ARC) arc-*-* | |
627 | Mitsubishi D30V d30v-*-* | |
628 | Fujitsu FR30 fr30-*-elf* | |
629 | OS/9000 i[34]86-*-os9k | |
630 | I960 with MON960 i960-*-coff | |
5835abe7 | 631 | |
a094c6fb AC |
632 | * MIPS $fp behavior changed |
633 | ||
634 | The convenience variable $fp, for the MIPS, now consistently returns | |
635 | the address of the current frame's base. Previously, depending on the | |
636 | context, $fp could refer to either $sp or the current frame's base | |
637 | address. See ``8.10 Registers'' in the manual ``Debugging with GDB: | |
638 | The GNU Source-Level Debugger''. | |
639 | ||
299ffc64 | 640 | *** Changes in GDB 5.3: |
37057839 | 641 | |
46248966 AC |
642 | * GNU/Linux shared library multi-threaded performance improved. |
643 | ||
644 | When debugging a multi-threaded application on GNU/Linux, GDB now uses | |
645 | `/proc', in preference to `ptrace' for memory reads. This may result | |
646 | in an improvement in the start-up time of multi-threaded, shared | |
647 | library applications when run under GDB. One GDB user writes: ``loads | |
648 | shared libs like mad''. | |
649 | ||
b9d14705 | 650 | * ``gdbserver'' now supports multi-threaded applications on some targets |
6da02953 | 651 | |
b9d14705 DJ |
652 | Support for debugging multi-threaded applications which use |
653 | the GNU/Linux LinuxThreads package has been added for | |
654 | arm*-*-linux*-gnu*, i[3456]86-*-linux*-gnu*, mips*-*-linux*-gnu*, | |
655 | powerpc*-*-linux*-gnu*, and sh*-*-linux*-gnu*. | |
6da02953 | 656 | |
e0e9281e JB |
657 | * GDB now supports C/C++ preprocessor macros. |
658 | ||
659 | GDB now expands preprocessor macro invocations in C/C++ expressions, | |
660 | and provides various commands for showing macro definitions and how | |
661 | they expand. | |
662 | ||
dd73b9bb AC |
663 | The new command `macro expand EXPRESSION' expands any macro |
664 | invocations in expression, and shows the result. | |
665 | ||
666 | The new command `show macro MACRO-NAME' shows the definition of the | |
667 | macro named MACRO-NAME, and where it was defined. | |
668 | ||
e0e9281e JB |
669 | Most compilers don't include information about macros in the debugging |
670 | information by default. In GCC 3.1, for example, you need to compile | |
671 | your program with the options `-gdwarf-2 -g3'. If the macro | |
672 | information is present in the executable, GDB will read it. | |
673 | ||
2250ee0c CV |
674 | * Multi-arched targets. |
675 | ||
6e3ba3b8 JT |
676 | DEC Alpha (partial) alpha*-*-* |
677 | DEC VAX (partial) vax-*-* | |
2250ee0c | 678 | NEC V850 v850-*-* |
6e3ba3b8 | 679 | National Semiconductor NS32000 (partial) ns32k-*-* |
a1789893 GS |
680 | Motorola 68000 (partial) m68k-*-* |
681 | Motorola MCORE mcore-*-* | |
2250ee0c | 682 | |
cd9bfe15 | 683 | * New targets. |
e33ce519 | 684 | |
456f8b9d DB |
685 | Fujitsu FRV architecture added by Red Hat frv*-*-* |
686 | ||
e33ce519 | 687 | |
da8ca43d JT |
688 | * New native configurations |
689 | ||
690 | Alpha NetBSD alpha*-*-netbsd* | |
029923d4 | 691 | SH NetBSD sh*-*-netbsdelf* |
45888261 | 692 | MIPS NetBSD mips*-*-netbsd* |
9ce5c36a | 693 | UltraSPARC NetBSD sparc64-*-netbsd* |
da8ca43d | 694 | |
cd9bfe15 AC |
695 | * OBSOLETE configurations and files |
696 | ||
697 | Configurations that have been declared obsolete in this release have | |
698 | been commented out. Unless there is activity to revive these | |
699 | configurations, the next release of GDB will have their sources | |
700 | permanently REMOVED. | |
701 | ||
92eb23c5 | 702 | Mitsubishi D30V d30v-*-* |
a99a9e1b | 703 | OS/9000 i[34]86-*-os9k |
1c7cc583 | 704 | IBM AIX PS/2 i[3456]86-*-aix |
7a3085c1 | 705 | Fujitsu FR30 fr30-*-elf* |
7fb623f7 | 706 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 |
eb4c54a2 | 707 | Argonaut Risc Chip (ARC) arc-*-* |
d8ee244c MK |
708 | i386 running Mach 3.0 i[3456]86-*-mach3* |
709 | i386 running Mach i[3456]86-*-mach* | |
710 | i386 running OSF/1 i[3456]86-*osf1mk* | |
822e978b AC |
711 | HP/Apollo 68k Family m68*-apollo*-sysv*, |
712 | m68*-apollo*-bsd*, | |
713 | m68*-hp-bsd*, m68*-hp-hpux* | |
4d210288 | 714 | I960 with MON960 i960-*-coff |
92eb23c5 | 715 | |
db034ac5 AC |
716 | * OBSOLETE languages |
717 | ||
718 | CHILL, a Pascal like language used by telecommunications companies. | |
719 | ||
cd9bfe15 AC |
720 | * REMOVED configurations and files |
721 | ||
722 | AMD 29k family via UDI a29k-amd-udi, udi29k | |
723 | A29K VxWorks a29k-*-vxworks | |
724 | AMD 29000 embedded, using EBMON a29k-none-none | |
725 | AMD 29000 embedded with COFF a29k-none-coff | |
726 | AMD 29000 embedded with a.out a29k-none-aout | |
727 | ||
728 | testsuite/gdb.hp/gdb.threads-hp/ directory | |
729 | ||
20f01a46 DH |
730 | * New command "set max-user-call-depth <nnn>" |
731 | ||
732 | This command allows the user to limit the call depth of user-defined | |
733 | commands. The default is 1024. | |
734 | ||
a5941fbf MK |
735 | * Changes in FreeBSD/i386 native debugging. |
736 | ||
737 | Support for the "generate-core-file" has been added. | |
738 | ||
89743e04 MS |
739 | * New commands "dump", "append", and "restore". |
740 | ||
741 | These commands allow data to be copied from target memory | |
742 | to a bfd-format or binary file (dump and append), and back | |
743 | from a file into memory (restore). | |
37057839 | 744 | |
9fb14e79 JB |
745 | * Improved "next/step" support on multi-processor Alpha Tru64. |
746 | ||
747 | The previous single-step mechanism could cause unpredictable problems, | |
748 | including the random appearance of SIGSEGV or SIGTRAP signals. The use | |
749 | of a software single-step mechanism prevents this. | |
750 | ||
2037aebb AC |
751 | *** Changes in GDB 5.2.1: |
752 | ||
753 | * New targets. | |
754 | ||
755 | Atmel AVR avr*-*-* | |
756 | ||
757 | * Bug fixes | |
758 | ||
759 | gdb/182: gdb/323: gdb/237: On alpha, gdb was reporting: | |
760 | mdebugread.c:2443: gdb-internal-error: sect_index_data not initialized | |
761 | Fix, by Joel Brobecker imported from mainline. | |
762 | ||
763 | gdb/439: gdb/291: On some ELF object files, gdb was reporting: | |
764 | dwarf2read.c:1072: gdb-internal-error: sect_index_text not initialize | |
765 | Fix, by Fred Fish, imported from mainline. | |
766 | ||
767 | Dwarf2 .debug_frame & .eh_frame handler improved in many ways. | |
768 | Surprisingly enough, it works now. | |
769 | By Michal Ludvig, imported from mainline. | |
770 | ||
771 | i386 hardware watchpoint support: | |
772 | avoid misses on second run for some targets. | |
773 | By Pierre Muller, imported from mainline. | |
774 | ||
37057839 | 775 | *** Changes in GDB 5.2: |
eb7cedd9 | 776 | |
1a703748 MS |
777 | * New command "set trust-readonly-sections on[off]". |
778 | ||
779 | This command is a hint that tells gdb that read-only sections | |
780 | really are read-only (ie. that their contents will not change). | |
781 | In this mode, gdb will go to the object file rather than the | |
782 | target to read memory from read-only sections (such as ".text"). | |
783 | This can be a significant performance improvement on some | |
784 | (notably embedded) targets. | |
785 | ||
cefd4ef5 MS |
786 | * New command "generate-core-file" (or "gcore"). |
787 | ||
55241689 AC |
788 | This new gdb command allows the user to drop a core file of the child |
789 | process state at any time. So far it's been implemented only for | |
790 | GNU/Linux and Solaris, but should be relatively easily ported to other | |
791 | hosts. Argument is core file name (defaults to core.<pid>). | |
cefd4ef5 | 792 | |
352ed7b4 MS |
793 | * New command line option |
794 | ||
795 | GDB now accepts --pid or -p followed by a process id. | |
796 | ||
797 | * Change in command line behavior -- corefiles vs. process ids. | |
798 | ||
799 | There is a subtle behavior in the way in which GDB handles | |
800 | command line arguments. The first non-flag argument is always | |
801 | a program to debug, but the second non-flag argument may either | |
802 | be a corefile or a process id. Previously, GDB would attempt to | |
803 | open the second argument as a corefile, and if that failed, would | |
804 | issue a superfluous error message and then attempt to attach it as | |
805 | a process. Now, if the second argument begins with a non-digit, | |
806 | it will be treated as a corefile. If it begins with a digit, | |
807 | GDB will attempt to attach it as a process, and if no such process | |
808 | is found, will then attempt to open it as a corefile. | |
809 | ||
fe419ffc RE |
810 | * Changes in ARM configurations. |
811 | ||
812 | Multi-arch support is enabled for all ARM configurations. The ARM/NetBSD | |
813 | configuration is fully multi-arch. | |
814 | ||
eb7cedd9 MK |
815 | * New native configurations |
816 | ||
fe419ffc | 817 | ARM NetBSD arm*-*-netbsd* |
eb7cedd9 | 818 | x86 OpenBSD i[3456]86-*-openbsd* |
55241689 | 819 | AMD x86-64 running GNU/Linux x86_64-*-linux-* |
768f0842 | 820 | Sparc64 running FreeBSD sparc64-*-freebsd* |
eb7cedd9 | 821 | |
c9f63e6b CV |
822 | * New targets |
823 | ||
824 | Sanyo XStormy16 xstormy16-elf | |
825 | ||
9b4ff276 AC |
826 | * OBSOLETE configurations and files |
827 | ||
828 | Configurations that have been declared obsolete in this release have | |
829 | been commented out. Unless there is activity to revive these | |
830 | configurations, the next release of GDB will have their sources | |
831 | permanently REMOVED. | |
832 | ||
833 | AMD 29k family via UDI a29k-amd-udi, udi29k | |
834 | A29K VxWorks a29k-*-vxworks | |
835 | AMD 29000 embedded, using EBMON a29k-none-none | |
836 | AMD 29000 embedded with COFF a29k-none-coff | |
837 | AMD 29000 embedded with a.out a29k-none-aout | |
838 | ||
b4ceaee6 | 839 | testsuite/gdb.hp/gdb.threads-hp/ directory |
9b4ff276 | 840 | |
e2caac18 AC |
841 | * REMOVED configurations and files |
842 | ||
843 | TI TMS320C80 tic80-*-* | |
7bc65f05 | 844 | WDC 65816 w65-*-* |
7768dd6c AC |
845 | PowerPC Solaris powerpcle-*-solaris* |
846 | PowerPC Windows NT powerpcle-*-cygwin32 | |
847 | PowerPC Netware powerpc-*-netware* | |
5e734e1f | 848 | Harris/CXUX m88k m88*-harris-cxux* |
1406caf7 AC |
849 | Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
850 | ns32k-utek-sysv* ns32k-utek-* | |
7e24f0b1 | 851 | SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
9b567150 | 852 | Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
3680c638 AC |
853 | Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
854 | ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* | |
a752853e | 855 | Apple Macintosh (MPW) host and target N/A host, powerpc-*-macos* |
e2caac18 | 856 | |
c2a727fa TT |
857 | * Changes to command line processing |
858 | ||
859 | The new `--args' feature can be used to specify command-line arguments | |
860 | for the inferior from gdb's command line. | |
861 | ||
467d8519 TT |
862 | * Changes to key bindings |
863 | ||
864 | There is a new `operate-and-get-next' function bound to `C-o'. | |
865 | ||
7072a954 AC |
866 | *** Changes in GDB 5.1.1 |
867 | ||
868 | Fix compile problem on DJGPP. | |
869 | ||
870 | Fix a problem with floating-point registers on the i386 being | |
871 | corrupted. | |
872 | ||
873 | Fix to stop GDB crashing on .debug_str debug info. | |
874 | ||
875 | Numerous documentation fixes. | |
876 | ||
877 | Numerous testsuite fixes. | |
878 | ||
34f47bc4 | 879 | *** Changes in GDB 5.1: |
139760b7 MK |
880 | |
881 | * New native configurations | |
882 | ||
883 | Alpha FreeBSD alpha*-*-freebsd* | |
884 | x86 FreeBSD 3.x and 4.x i[3456]86*-freebsd[34]* | |
55241689 | 885 | MIPS GNU/Linux mips*-*-linux* |
e23194cb EZ |
886 | MIPS SGI Irix 6.x mips*-sgi-irix6* |
887 | ia64 AIX ia64-*-aix* | |
55241689 | 888 | s390 and s390x GNU/Linux {s390,s390x}-*-linux* |
139760b7 | 889 | |
bf64bfd6 AC |
890 | * New targets |
891 | ||
def90278 | 892 | Motorola 68HC11 and 68HC12 m68hc11-elf |
24be5c34 | 893 | CRIS cris-axis |
55241689 | 894 | UltraSparc running GNU/Linux sparc64-*-linux* |
def90278 | 895 | |
17e78a56 | 896 | * OBSOLETE configurations and files |
bf64bfd6 AC |
897 | |
898 | x86 FreeBSD before 2.2 i[3456]86*-freebsd{1,2.[01]}*, | |
9b9c068d | 899 | Harris/CXUX m88k m88*-harris-cxux* |
bb19ff3b AC |
900 | Most ns32k hosts and targets ns32k-*-mach3* ns32k-umax-* |
901 | ns32k-utek-sysv* ns32k-utek-* | |
76f4ea53 AC |
902 | TI TMS320C80 tic80-*-* |
903 | WDC 65816 w65-*-* | |
4a1968f4 | 904 | Ultracomputer (29K) running Sym1 a29k-nyu-sym1 a29k-*-kern* |
1b2b2c16 AC |
905 | PowerPC Solaris powerpcle-*-solaris* |
906 | PowerPC Windows NT powerpcle-*-cygwin32 | |
907 | PowerPC Netware powerpc-*-netware* | |
24f89b68 | 908 | SunOS 4.0.Xi on i386 i[3456]86-*-sunos* |
514e603d AC |
909 | Sony NEWS (68K) running NEWSOS 3.x m68*-sony-sysv news |
910 | ISI Optimum V (3.05) under 4.3bsd. m68*-isi-* | |
d036b4d9 | 911 | Apple Macintosh (MPW) host N/A |
bf64bfd6 | 912 | |
17e78a56 AC |
913 | stuff.c (Program to stuff files into a specially prepared space in kdb) |
914 | kdb-start.c (Main loop for the standalone kernel debugger) | |
915 | ||
7fcca85b AC |
916 | Configurations that have been declared obsolete in this release have |
917 | been commented out. Unless there is activity to revive these | |
918 | configurations, the next release of GDB will have their sources | |
919 | permanently REMOVED. | |
920 | ||
a196c81c | 921 | * REMOVED configurations and files |
7fcca85b AC |
922 | |
923 | Altos 3068 m68*-altos-* | |
924 | Convex c1-*-*, c2-*-* | |
925 | Pyramid pyramid-*-* | |
926 | ARM RISCix arm-*-* (as host) | |
927 | Tahoe tahoe-*-* | |
a196c81c | 928 | ser-ocd.c *-*-* |
bf64bfd6 | 929 | |
6d6b80e5 | 930 | * GDB has been converted to ISO C. |
e23194cb | 931 | |
6d6b80e5 | 932 | GDB's source code has been converted to ISO C. In particular, the |
e23194cb EZ |
933 | sources are fully protoized, and rely on standard headers being |
934 | present. | |
935 | ||
bf64bfd6 AC |
936 | * Other news: |
937 | ||
e23194cb EZ |
938 | * "info symbol" works on platforms which use COFF, ECOFF, XCOFF, and NLM. |
939 | ||
940 | * The MI enabled by default. | |
941 | ||
942 | The new machine oriented interface (MI) introduced in GDB 5.0 has been | |
943 | revised and enabled by default. Packages which use GDB as a debugging | |
944 | engine behind a UI or another front end are encouraged to switch to | |
945 | using the GDB/MI interface, instead of the old annotations interface | |
946 | which is now deprecated. | |
947 | ||
948 | * Support for debugging Pascal programs. | |
949 | ||
950 | GDB now includes support for debugging Pascal programs. The following | |
951 | main features are supported: | |
952 | ||
953 | - Pascal-specific data types such as sets; | |
954 | ||
955 | - automatic recognition of Pascal sources based on file-name | |
956 | extension; | |
957 | ||
958 | - Pascal-style display of data types, variables, and functions; | |
959 | ||
960 | - a Pascal expression parser. | |
961 | ||
962 | However, some important features are not yet supported. | |
963 | ||
964 | - Pascal string operations are not supported at all; | |
965 | ||
966 | - there are some problems with boolean types; | |
967 | ||
968 | - Pascal type hexadecimal constants are not supported | |
969 | because they conflict with the internal variables format; | |
970 | ||
971 | - support for Pascal objects and classes is not full yet; | |
972 | ||
973 | - unlike Pascal, GDB is case-sensitive for symbol names. | |
974 | ||
975 | * Changes in completion. | |
976 | ||
977 | Commands such as `shell', `run' and `set args', which pass arguments | |
978 | to inferior programs, now complete on file names, similar to what | |
979 | users expect at the shell prompt. | |
980 | ||
981 | Commands which accept locations, such as `disassemble', `print', | |
982 | `breakpoint', `until', etc. now complete on filenames as well as | |
983 | program symbols. Thus, if you type "break foob TAB", and the source | |
984 | files linked into the programs include `foobar.c', that file name will | |
985 | be one of the candidates for completion. However, file names are not | |
986 | considered for completion after you typed a colon that delimits a file | |
987 | name from a name of a function in that file, as in "break foo.c:bar". | |
988 | ||
989 | `set demangle-style' completes on available demangling styles. | |
990 | ||
991 | * New platform-independent commands: | |
992 | ||
993 | It is now possible to define a post-hook for a command as well as a | |
994 | hook that runs before the command. For more details, see the | |
995 | documentation of `hookpost' in the GDB manual. | |
996 | ||
997 | * Changes in GNU/Linux native debugging. | |
998 | ||
d7275149 MK |
999 | Support for debugging multi-threaded programs has been completely |
1000 | revised for all platforms except m68k and sparc. You can now debug as | |
1001 | many threads as your system allows you to have. | |
1002 | ||
e23194cb EZ |
1003 | Attach/detach is supported for multi-threaded programs. |
1004 | ||
d7275149 MK |
1005 | Support for SSE registers was added for x86. This doesn't work for |
1006 | multi-threaded programs though. | |
e23194cb EZ |
1007 | |
1008 | * Changes in MIPS configurations. | |
bf64bfd6 AC |
1009 | |
1010 | Multi-arch support is enabled for all MIPS configurations. | |
1011 | ||
e23194cb EZ |
1012 | GDB can now be built as native debugger on SGI Irix 6.x systems for |
1013 | debugging n32 executables. (Debugging 64-bit executables is not yet | |
1014 | supported.) | |
1015 | ||
1016 | * Unified support for hardware watchpoints in all x86 configurations. | |
1017 | ||
1018 | Most (if not all) native x86 configurations support hardware-assisted | |
1019 | breakpoints and watchpoints in a unified manner. This support | |
1020 | implements debug register sharing between watchpoints, which allows to | |
1021 | put a virtually infinite number of watchpoints on the same address, | |
1022 | and also supports watching regions up to 16 bytes with several debug | |
1023 | registers. | |
1024 | ||
1025 | The new maintenance command `maintenance show-debug-regs' toggles | |
1026 | debugging print-outs in functions that insert, remove, and test | |
1027 | watchpoints and hardware breakpoints. | |
1028 | ||
1029 | * Changes in the DJGPP native configuration. | |
1030 | ||
1031 | New command ``info dos sysinfo'' displays assorted information about | |
1032 | the CPU, OS, memory, and DPMI server. | |
1033 | ||
1034 | New commands ``info dos gdt'', ``info dos ldt'', and ``info dos idt'' | |
1035 | display information about segment descriptors stored in GDT, LDT, and | |
1036 | IDT. | |
1037 | ||
1038 | New commands ``info dos pde'' and ``info dos pte'' display entries | |
1039 | from Page Directory and Page Tables (for now works with CWSDPMI only). | |
1040 | New command ``info dos address-pte'' displays the Page Table entry for | |
1041 | a given linear address. | |
1042 | ||
1043 | GDB can now pass command lines longer than 126 characters to the | |
1044 | program being debugged (requires an update to the libdbg.a library | |
1045 | which is part of the DJGPP development kit). | |
1046 | ||
1047 | DWARF2 debug info is now supported. | |
1048 | ||
6c56c069 EZ |
1049 | It is now possible to `step' and `next' through calls to `longjmp'. |
1050 | ||
e23194cb EZ |
1051 | * Changes in documentation. |
1052 | ||
1053 | All GDB documentation was converted to GFDL, the GNU Free | |
1054 | Documentation License. | |
1055 | ||
1056 | Tracepoints-related commands are now fully documented in the GDB | |
1057 | manual. | |
1058 | ||
1059 | TUI, the Text-mode User Interface, is now documented in the manual. | |
1060 | ||
1061 | Tracepoints-related commands are now fully documented in the GDB | |
1062 | manual. | |
1063 | ||
1064 | The "GDB Internals" manual now has an index. It also includes | |
1065 | documentation of `ui_out' functions, GDB coding standards, x86 | |
1066 | hardware watchpoints, and memory region attributes. | |
1067 | ||
5d6640b1 AC |
1068 | * GDB's version number moved to ``version.in'' |
1069 | ||
1070 | The Makefile variable VERSION has been replaced by the file | |
1071 | ``version.in''. People creating GDB distributions should update the | |
1072 | contents of this file. | |
1073 | ||
1a1d8446 AC |
1074 | * gdba.el deleted |
1075 | ||
1076 | GUD support is now a standard part of the EMACS distribution. | |
139760b7 | 1077 | |
9debab2f | 1078 | *** Changes in GDB 5.0: |
7a292a7a | 1079 | |
c63ce875 EZ |
1080 | * Improved support for debugging FP programs on x86 targets |
1081 | ||
1082 | Unified and much-improved support for debugging floating-point | |
1083 | programs on all x86 targets. In particular, ``info float'' now | |
1084 | displays the FP registers in the same format on all x86 targets, with | |
1085 | greater level of detail. | |
1086 | ||
1087 | * Improvements and bugfixes in hardware-assisted watchpoints | |
1088 | ||
1089 | It is now possible to watch array elements, struct members, and | |
1090 | bitfields with hardware-assisted watchpoints. Data-read watchpoints | |
1091 | on x86 targets no longer erroneously trigger when the address is | |
1092 | written. | |
1093 | ||
1094 | * Improvements in the native DJGPP version of GDB | |
1095 | ||
1096 | The distribution now includes all the scripts and auxiliary files | |
1097 | necessary to build the native DJGPP version on MS-DOS/MS-Windows | |
1098 | machines ``out of the box''. | |
1099 | ||
1100 | The DJGPP version can now debug programs that use signals. It is | |
1101 | possible to catch signals that happened in the debuggee, deliver | |
1102 | signals to it, interrupt it with Ctrl-C, etc. (Previously, a signal | |
1103 | would kill the program being debugged.) Programs that hook hardware | |
1104 | interrupts (keyboard, timer, etc.) can also be debugged. | |
1105 | ||
1106 | It is now possible to debug DJGPP programs that redirect their | |
1107 | standard handles or switch them to raw (as opposed to cooked) mode, or | |
1108 | even close them. The command ``run < foo > bar'' works as expected, | |
1109 | and ``info terminal'' reports useful information about the debuggee's | |
1110 | terminal, including raw/cooked mode, redirection, etc. | |
1111 | ||
1112 | The DJGPP version now uses termios functions for console I/O, which | |
1113 | enables debugging graphics programs. Interrupting GDB with Ctrl-C | |
1114 | also works. | |
1115 | ||
1116 | DOS-style file names with drive letters are now fully supported by | |
1117 | GDB. | |
1118 | ||
1119 | It is now possible to debug DJGPP programs that switch their working | |
1120 | directory. It is also possible to rerun the debuggee any number of | |
1121 | times without restarting GDB; thus, you can use the same setup, | |
1122 | breakpoints, etc. for many debugging sessions. | |
1123 | ||
ed9a39eb JM |
1124 | * New native configurations |
1125 | ||
1126 | ARM GNU/Linux arm*-*-linux* | |
afc05dd4 | 1127 | PowerPC GNU/Linux powerpc-*-linux* |
ed9a39eb | 1128 | |
7a292a7a SS |
1129 | * New targets |
1130 | ||
96baa820 | 1131 | Motorola MCore mcore-*-* |
adf40b2e JM |
1132 | x86 VxWorks i[3456]86-*-vxworks* |
1133 | PowerPC VxWorks powerpc-*-vxworks* | |
7a292a7a SS |
1134 | TI TMS320C80 tic80-*-* |
1135 | ||
085dd6e6 JM |
1136 | * OBSOLETE configurations |
1137 | ||
1138 | Altos 3068 m68*-altos-* | |
1139 | Convex c1-*-*, c2-*-* | |
9846de1b | 1140 | Pyramid pyramid-*-* |
ed9a39eb | 1141 | ARM RISCix arm-*-* (as host) |
104c1213 | 1142 | Tahoe tahoe-*-* |
7a292a7a | 1143 | |
9debab2f AC |
1144 | Configurations that have been declared obsolete will be commented out, |
1145 | but the code will be left in place. If there is no activity to revive | |
1146 | these configurations before the next release of GDB, the sources will | |
1147 | be permanently REMOVED. | |
1148 | ||
5330533d SS |
1149 | * Gould support removed |
1150 | ||
1151 | Support for the Gould PowerNode and NP1 has been removed. | |
1152 | ||
bc9e5bbf AC |
1153 | * New features for SVR4 |
1154 | ||
1155 | On SVR4 native platforms (such as Solaris), if you attach to a process | |
1156 | without first loading a symbol file, GDB will now attempt to locate and | |
1157 | load symbols from the running process's executable file. | |
1158 | ||
1159 | * Many C++ enhancements | |
1160 | ||
1161 | C++ support has been greatly improved. Overload resolution now works properly | |
1162 | in almost all cases. RTTI support is on the way. | |
1163 | ||
adf40b2e JM |
1164 | * Remote targets can connect to a sub-program |
1165 | ||
1166 | A popen(3) style serial-device has been added. This device starts a | |
1167 | sub-process (such as a stand-alone simulator) and then communicates | |
1168 | with that. The sub-program to run is specified using the syntax | |
1169 | ``|<program> <args>'' vis: | |
1170 | ||
1171 | (gdb) set remotedebug 1 | |
1172 | (gdb) target extended-remote |mn10300-elf-sim program-args | |
1173 | ||
43e526b9 JM |
1174 | * MIPS 64 remote protocol |
1175 | ||
1176 | A long standing bug in the mips64 remote protocol where by GDB | |
1177 | expected certain 32 bit registers (ex SR) to be transfered as 32 | |
1178 | instead of 64 bits has been fixed. | |
1179 | ||
1180 | The command ``set remote-mips64-transfers-32bit-regs on'' has been | |
1181 | added to provide backward compatibility with older versions of GDB. | |
1182 | ||
96baa820 JM |
1183 | * ``set remotebinarydownload'' replaced by ``set remote X-packet'' |
1184 | ||
1185 | The command ``set remotebinarydownload'' command has been replaced by | |
1186 | ``set remote X-packet''. Other commands in ``set remote'' family | |
1187 | include ``set remote P-packet''. | |
1188 | ||
11cf8741 JM |
1189 | * Breakpoint commands accept ranges. |
1190 | ||
1191 | The breakpoint commands ``enable'', ``disable'', and ``delete'' now | |
1192 | accept a range of breakpoints, e.g. ``5-7''. The tracepoint command | |
1193 | ``tracepoint passcount'' also accepts a range of tracepoints. | |
1194 | ||
7876dd43 DB |
1195 | * ``apropos'' command added. |
1196 | ||
1197 | The ``apropos'' command searches through command names and | |
1198 | documentation strings, printing out matches, making it much easier to | |
1199 | try to find a command that does what you are looking for. | |
1200 | ||
bc9e5bbf AC |
1201 | * New MI interface |
1202 | ||
1203 | A new machine oriented interface (MI) has been added to GDB. This | |
1204 | interface is designed for debug environments running GDB as a separate | |
7162c0ca EZ |
1205 | process. This is part of the long term libGDB project. See the |
1206 | "GDB/MI" chapter of the GDB manual for further information. It can be | |
1207 | enabled by configuring with: | |
bc9e5bbf AC |
1208 | |
1209 | .../configure --enable-gdbmi | |
1210 | ||
c906108c SS |
1211 | *** Changes in GDB-4.18: |
1212 | ||
1213 | * New native configurations | |
1214 | ||
1215 | HP-UX 10.20 hppa*-*-hpux10.20 | |
1216 | HP-UX 11.x hppa*-*-hpux11.0* | |
55241689 | 1217 | M68K GNU/Linux m68*-*-linux* |
c906108c SS |
1218 | |
1219 | * New targets | |
1220 | ||
1221 | Fujitsu FR30 fr30-*-elf* | |
1222 | Intel StrongARM strongarm-*-* | |
1223 | Mitsubishi D30V d30v-*-* | |
1224 | ||
1225 | * OBSOLETE configurations | |
1226 | ||
1227 | Gould PowerNode, NP1 np1-*-*, pn-*-* | |
1228 | ||
1229 | Configurations that have been declared obsolete will be commented out, | |
1230 | but the code will be left in place. If there is no activity to revive | |
1231 | these configurations before the next release of GDB, the sources will | |
1232 | be permanently REMOVED. | |
1233 | ||
1234 | * ANSI/ISO C | |
1235 | ||
1236 | As a compatibility experiment, GDB's source files buildsym.h and | |
1237 | buildsym.c have been converted to pure standard C, no longer | |
1238 | containing any K&R compatibility code. We believe that all systems in | |
1239 | use today either come with a standard C compiler, or have a GCC port | |
1240 | available. If this is not true, please report the affected | |
1241 | configuration to bug-gdb@gnu.org immediately. See the README file for | |
1242 | information about getting a standard C compiler if you don't have one | |
1243 | already. | |
1244 | ||
1245 | * Readline 2.2 | |
1246 | ||
1247 | GDB now uses readline 2.2. | |
1248 | ||
1249 | * set extension-language | |
1250 | ||
1251 | You can now control the mapping between filename extensions and source | |
1252 | languages by using the `set extension-language' command. For instance, | |
1253 | you can ask GDB to treat .c files as C++ by saying | |
1254 | set extension-language .c c++ | |
1255 | The command `info extensions' lists all of the recognized extensions | |
1256 | and their associated languages. | |
1257 | ||
1258 | * Setting processor type for PowerPC and RS/6000 | |
1259 | ||
1260 | When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target, | |
1261 | you can use the `set processor' command to specify what variant of the | |
1262 | PowerPC family you are debugging. The command | |
1263 | ||
1264 | set processor NAME | |
1265 | ||
1266 | sets the PowerPC/RS6000 variant to NAME. GDB knows about the | |
1267 | following PowerPC and RS6000 variants: | |
1268 | ||
1269 | ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code | |
1270 | rs6000 IBM RS6000 ("POWER") architecture, user-level view | |
1271 | 403 IBM PowerPC 403 | |
1272 | 403GC IBM PowerPC 403GC | |
1273 | 505 Motorola PowerPC 505 | |
1274 | 860 Motorola PowerPC 860 or 850 | |
1275 | 601 Motorola PowerPC 601 | |
1276 | 602 Motorola PowerPC 602 | |
1277 | 603 Motorola/IBM PowerPC 603 or 603e | |
1278 | 604 Motorola PowerPC 604 or 604e | |
1279 | 750 Motorola/IBM PowerPC 750 or 750 | |
1280 | ||
1281 | At the moment, this command just tells GDB what to name the | |
1282 | special-purpose processor registers. Since almost all the affected | |
1283 | registers are inaccessible to user-level programs, this command is | |
1284 | only useful for remote debugging in its present form. | |
1285 | ||
1286 | * HP-UX support | |
1287 | ||
1288 | Thanks to a major code donation from Hewlett-Packard, GDB now has much | |
1289 | more extensive support for HP-UX. Added features include shared | |
1290 | library support, kernel threads and hardware watchpoints for 11.00, | |
1291 | support for HP's ANSI C and C++ compilers, and a compatibility mode | |
1292 | for xdb and dbx commands. | |
1293 | ||
1294 | * Catchpoints | |
1295 | ||
1296 | HP's donation includes the new concept of catchpoints, which is a | |
1297 | generalization of the old catch command. On HP-UX, it is now possible | |
1298 | to catch exec, fork, and vfork, as well as library loading. | |
1299 | ||
1300 | This means that the existing catch command has changed; its first | |
1301 | argument now specifies the type of catch to be set up. See the | |
1302 | output of "help catch" for a list of catchpoint types. | |
1303 | ||
1304 | * Debugging across forks | |
1305 | ||
1306 | On HP-UX, you can choose which process to debug when a fork() happens | |
1307 | in the inferior. | |
1308 | ||
1309 | * TUI | |
1310 | ||
1311 | HP has donated a curses-based terminal user interface (TUI). To get | |
1312 | it, build with --enable-tui. Although this can be enabled for any | |
1313 | configuration, at present it only works for native HP debugging. | |
1314 | ||
1315 | * GDB remote protocol additions | |
1316 | ||
1317 | A new protocol packet 'X' that writes binary data is now available. | |
1318 | Default behavior is to try 'X', then drop back to 'M' if the stub | |
1319 | fails to respond. The settable variable `remotebinarydownload' | |
1320 | allows explicit control over the use of 'X'. | |
1321 | ||
1322 | For 64-bit targets, the memory packets ('M' and 'm') can now contain a | |
1323 | full 64-bit address. The command | |
1324 | ||
1325 | set remoteaddresssize 32 | |
1326 | ||
1327 | can be used to revert to the old behaviour. For existing remote stubs | |
1328 | the change should not be noticed, as the additional address information | |
1329 | will be discarded. | |
1330 | ||
1331 | In order to assist in debugging stubs, you may use the maintenance | |
1332 | command `packet' to send any text string to the stub. For instance, | |
1333 | ||
1334 | maint packet heythere | |
1335 | ||
1336 | sends the packet "$heythere#<checksum>". Note that it is very easy to | |
1337 | disrupt a debugging session by sending the wrong packet at the wrong | |
1338 | time. | |
1339 | ||
1340 | The compare-sections command allows you to compare section data on the | |
1341 | target to what is in the executable file without uploading or | |
1342 | downloading, by comparing CRC checksums. | |
1343 | ||
1344 | * Tracing can collect general expressions | |
1345 | ||
1346 | You may now collect general expressions at tracepoints. This requires | |
1347 | further additions to the target-side stub; see tracepoint.c and | |
1348 | doc/agentexpr.texi for further details. | |
1349 | ||
1350 | * mask-address variable for Mips | |
1351 | ||
1352 | For Mips targets, you may control the zeroing of the upper 32 bits of | |
1353 | a 64-bit address by entering `set mask-address on'. This is mainly | |
1354 | of interest to users of embedded R4xxx and R5xxx processors. | |
1355 | ||
1356 | * Higher serial baud rates | |
1357 | ||
1358 | GDB's serial code now allows you to specify baud rates 57600, 115200, | |
1359 | 230400, and 460800 baud. (Note that your host system may not be able | |
1360 | to achieve all of these rates.) | |
1361 | ||
1362 | * i960 simulator | |
1363 | ||
1364 | The i960 configuration now includes an initial implementation of a | |
1365 | builtin simulator, contributed by Jim Wilson. | |
1366 | ||
1367 | ||
1368 | *** Changes in GDB-4.17: | |
1369 | ||
1370 | * New native configurations | |
1371 | ||
1372 | Alpha GNU/Linux alpha*-*-linux* | |
1373 | Unixware 2.x i[3456]86-unixware2* | |
1374 | Irix 6.x mips*-sgi-irix6* | |
1375 | PowerPC GNU/Linux powerpc-*-linux* | |
1376 | PowerPC Solaris powerpcle-*-solaris* | |
1377 | Sparc GNU/Linux sparc-*-linux* | |
1378 | Motorola sysV68 R3V7.1 m68k-motorola-sysv | |
1379 | ||
1380 | * New targets | |
1381 | ||
1382 | Argonaut Risc Chip (ARC) arc-*-* | |
1383 | Hitachi H8/300S h8300*-*-* | |
1384 | Matsushita MN10200 w/simulator mn10200-*-* | |
1385 | Matsushita MN10300 w/simulator mn10300-*-* | |
1386 | MIPS NEC VR4100 mips64*vr4100*{,el}-*-elf* | |
1387 | MIPS NEC VR5000 mips64*vr5000*{,el}-*-elf* | |
1388 | MIPS Toshiba TX39 mips64*tx39*{,el}-*-elf* | |
1389 | Mitsubishi D10V w/simulator d10v-*-* | |
1390 | Mitsubishi M32R/D w/simulator m32r-*-elf* | |
1391 | Tsqware Sparclet sparclet-*-* | |
1392 | NEC V850 w/simulator v850-*-* | |
1393 | ||
1394 | * New debugging protocols | |
1395 | ||
1396 | ARM with RDI protocol arm*-*-* | |
1397 | M68K with dBUG monitor m68*-*-{aout,coff,elf} | |
1398 | DDB and LSI variants of PMON protocol mips*-*-* | |
1399 | PowerPC with DINK32 monitor powerpc{,le}-*-eabi | |
1400 | PowerPC with SDS protocol powerpc{,le}-*-eabi | |
1401 | Macraigor OCD (Wiggler) devices powerpc{,le}-*-eabi | |
1402 | ||
1403 | * DWARF 2 | |
1404 | ||
1405 | All configurations can now understand and use the DWARF 2 debugging | |
1406 | format. The choice is automatic, if the symbol file contains DWARF 2 | |
1407 | information. | |
1408 | ||
1409 | * Java frontend | |
1410 | ||
1411 | GDB now includes basic Java language support. This support is | |
1412 | only useful with Java compilers that produce native machine code. | |
1413 | ||
1414 | * solib-absolute-prefix and solib-search-path | |
1415 | ||
1416 | For SunOS and SVR4 shared libraries, you may now set the prefix for | |
1417 | loading absolute shared library symbol files, and the search path for | |
1418 | locating non-absolute shared library symbol files. | |
1419 | ||
1420 | * Live range splitting | |
1421 | ||
1422 | GDB can now effectively debug code for which GCC has performed live | |
1423 | range splitting as part of its optimization. See gdb/doc/LRS for | |
1424 | more details on the expected format of the stabs information. | |
1425 | ||
1426 | * Hurd support | |
1427 | ||
1428 | GDB's support for the GNU Hurd, including thread debugging, has been | |
1429 | updated to work with current versions of the Hurd. | |
1430 | ||
1431 | * ARM Thumb support | |
1432 | ||
1433 | GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit | |
1434 | instruction set. ARM GDB automatically detects when Thumb | |
1435 | instructions are in use, and adjusts disassembly and backtracing | |
1436 | accordingly. | |
1437 | ||
1438 | * MIPS16 support | |
1439 | ||
1440 | GDB's MIPS target configurations now handle the MIP16 16-bit | |
1441 | instruction set. | |
1442 | ||
1443 | * Overlay support | |
1444 | ||
1445 | GDB now includes support for overlays; if an executable has been | |
1446 | linked such that multiple sections are based at the same address, GDB | |
1447 | will decide which section to use for symbolic info. You can choose to | |
1448 | control the decision manually, using overlay commands, or implement | |
1449 | additional target-side support and use "overlay load-target" to bring | |
1450 | in the overlay mapping. Do "help overlay" for more detail. | |
1451 | ||
1452 | * info symbol | |
1453 | ||
1454 | The command "info symbol <address>" displays information about | |
1455 | the symbol at the specified address. | |
1456 | ||
1457 | * Trace support | |
1458 | ||
1459 | The standard remote protocol now includes an extension that allows | |
1460 | asynchronous collection and display of trace data. This requires | |
1461 | extensive support in the target-side debugging stub. Tracing mode | |
1462 | includes a new interaction mode in GDB and new commands: see the | |
1463 | file tracepoint.c for more details. | |
1464 | ||
1465 | * MIPS simulator | |
1466 | ||
1467 | Configurations for embedded MIPS now include a simulator contributed | |
1468 | by Cygnus Solutions. The simulator supports the instruction sets | |
1469 | of most MIPS variants. | |
1470 | ||
1471 | * Sparc simulator | |
1472 | ||
1473 | Sparc configurations may now include the ERC32 simulator contributed | |
1474 | by the European Space Agency. The simulator is not built into | |
1475 | Sparc targets by default; configure with --enable-sim to include it. | |
1476 | ||
1477 | * set architecture | |
1478 | ||
1479 | For target configurations that may include multiple variants of a | |
1480 | basic architecture (such as MIPS and SH), you may now set the | |
1481 | architecture explicitly. "set arch" sets, "info arch" lists | |
1482 | the possible architectures. | |
1483 | ||
1484 | *** Changes in GDB-4.16: | |
1485 | ||
1486 | * New native configurations | |
1487 | ||
1488 | Windows 95, x86 Windows NT i[345]86-*-cygwin32 | |
1489 | M68K NetBSD m68k-*-netbsd* | |
1490 | PowerPC AIX 4.x powerpc-*-aix* | |
1491 | PowerPC MacOS powerpc-*-macos* | |
1492 | PowerPC Windows NT powerpcle-*-cygwin32 | |
1493 | RS/6000 AIX 4.x rs6000-*-aix4* | |
1494 | ||
1495 | * New targets | |
1496 | ||
1497 | ARM with RDP protocol arm-*-* | |
1498 | I960 with MON960 i960-*-coff | |
1499 | MIPS VxWorks mips*-*-vxworks* | |
1500 | MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf* | |
1501 | PowerPC with PPCBUG monitor powerpc{,le}-*-eabi* | |
1502 | Hitachi SH3 sh-*-* | |
1503 | Matra Sparclet sparclet-*-* | |
1504 | ||
1505 | * PowerPC simulator | |
1506 | ||
1507 | The powerpc-eabi configuration now includes the PSIM simulator, | |
1508 | contributed by Andrew Cagney, with assistance from Mike Meissner. | |
1509 | PSIM is a very elaborate model of the PowerPC, including not only | |
1510 | basic instruction set execution, but also details of execution unit | |
1511 | performance and I/O hardware. See sim/ppc/README for more details. | |
1512 | ||
1513 | * Solaris 2.5 | |
1514 | ||
1515 | GDB now works with Solaris 2.5. | |
1516 | ||
1517 | * Windows 95/NT native | |
1518 | ||
1519 | GDB will now work as a native debugger on Windows 95 and Windows NT. | |
1520 | To build it from source, you must use the "gnu-win32" environment, | |
1521 | which uses a DLL to emulate enough of Unix to run the GNU tools. | |
1522 | Further information, binaries, and sources are available at | |
1523 | ftp.cygnus.com, under pub/gnu-win32. | |
1524 | ||
1525 | * dont-repeat command | |
1526 | ||
1527 | If a user-defined command includes the command `dont-repeat', then the | |
1528 | command will not be repeated if the user just types return. This is | |
1529 | useful if the command is time-consuming to run, so that accidental | |
1530 | extra keystrokes don't run the same command many times. | |
1531 | ||
1532 | * Send break instead of ^C | |
1533 | ||
1534 | The standard remote protocol now includes an option to send a break | |
1535 | rather than a ^C to the target in order to interrupt it. By default, | |
1536 | GDB will send ^C; to send a break, set the variable `remotebreak' to 1. | |
1537 | ||
1538 | * Remote protocol timeout | |
1539 | ||
1540 | The standard remote protocol includes a new variable `remotetimeout' | |
1541 | that allows you to set the number of seconds before GDB gives up trying | |
1542 | to read from the target. The default value is 2. | |
1543 | ||
1544 | * Automatic tracking of dynamic object loading (HPUX and Solaris only) | |
1545 | ||
1546 | By default GDB will automatically keep track of objects as they are | |
1547 | loaded and unloaded by the dynamic linker. By using the command `set | |
1548 | stop-on-solib-events 1' you can arrange for GDB to stop the inferior | |
1549 | when shared library events occur, thus allowing you to set breakpoints | |
1550 | in shared libraries which are explicitly loaded by the inferior. | |
1551 | ||
1552 | Note this feature does not work on hpux8. On hpux9 you must link | |
1553 | /usr/lib/end.o into your program. This feature should work | |
1554 | automatically on hpux10. | |
1555 | ||
1556 | * Irix 5.x hardware watchpoint support | |
1557 | ||
1558 | Irix 5 configurations now support the use of hardware watchpoints. | |
1559 | ||
1560 | * Mips protocol "SYN garbage limit" | |
1561 | ||
1562 | When debugging a Mips target using the `target mips' protocol, you | |
1563 | may set the number of characters that GDB will ignore by setting | |
1564 | the `syn-garbage-limit'. A value of -1 means that GDB will ignore | |
1565 | every character. The default value is 1050. | |
1566 | ||
1567 | * Recording and replaying remote debug sessions | |
1568 | ||
1569 | If you set `remotelogfile' to the name of a file, gdb will write to it | |
1570 | a recording of a remote debug session. This recording may then be | |
1571 | replayed back to gdb using "gdbreplay". See gdbserver/README for | |
1572 | details. This is useful when you have a problem with GDB while doing | |
1573 | remote debugging; you can make a recording of the session and send it | |
1574 | to someone else, who can then recreate the problem. | |
1575 | ||
1576 | * Speedups for remote debugging | |
1577 | ||
1578 | GDB includes speedups for downloading and stepping MIPS systems using | |
1579 | the IDT monitor, fast downloads to the Hitachi SH E7000 emulator, | |
1580 | and more efficient S-record downloading. | |
1581 | ||
1582 | * Memory use reductions and statistics collection | |
1583 | ||
1584 | GDB now uses less memory and reports statistics about memory usage. | |
1585 | Try the `maint print statistics' command, for example. | |
1586 | ||
1587 | *** Changes in GDB-4.15: | |
1588 | ||
1589 | * Psymtabs for XCOFF | |
1590 | ||
1591 | The symbol reader for AIX GDB now uses partial symbol tables. This | |
1592 | can greatly improve startup time, especially for large executables. | |
1593 | ||
1594 | * Remote targets use caching | |
1595 | ||
1596 | Remote targets now use a data cache to speed up communication with the | |
1597 | remote side. The data cache could lead to incorrect results because | |
1598 | it doesn't know about volatile variables, thus making it impossible to | |
1599 | debug targets which use memory mapped I/O devices. `set remotecache | |
1600 | off' turns the the data cache off. | |
1601 | ||
1602 | * Remote targets may have threads | |
1603 | ||
1604 | The standard remote protocol now includes support for multiple threads | |
1605 | in the target system, using new protocol commands 'H' and 'T'. See | |
1606 | gdb/remote.c for details. | |
1607 | ||
1608 | * NetROM support | |
1609 | ||
1610 | If GDB is configured with `--enable-netrom', then it will include | |
1611 | support for the NetROM ROM emulator from XLNT Designs. The NetROM | |
1612 | acts as though it is a bank of ROM on the target board, but you can | |
1613 | write into it over the network. GDB's support consists only of | |
1614 | support for fast loading into the emulated ROM; to debug, you must use | |
1615 | another protocol, such as standard remote protocol. The usual | |
1616 | sequence is something like | |
1617 | ||
1618 | target nrom <netrom-hostname> | |
1619 | load <prog> | |
1620 | target remote <netrom-hostname>:1235 | |
1621 | ||
1622 | * Macintosh host | |
1623 | ||
1624 | GDB now includes support for the Apple Macintosh, as a host only. It | |
1625 | may be run as either an MPW tool or as a standalone application, and | |
1626 | it can debug through the serial port. All the usual GDB commands are | |
1627 | available, but to the target command, you must supply "serial" as the | |
1628 | device type instead of "/dev/ttyXX". See mpw-README in the main | |
1629 | directory for more information on how to build. The MPW configuration | |
1630 | scripts */mpw-config.in support only a few targets, and only the | |
1631 | mips-idt-ecoff target has been tested. | |
1632 | ||
1633 | * Autoconf | |
1634 | ||
1635 | GDB configuration now uses autoconf. This is not user-visible, | |
1636 | but does simplify configuration and building. | |
1637 | ||
1638 | * hpux10 | |
1639 | ||
1640 | GDB now supports hpux10. | |
1641 | ||
1642 | *** Changes in GDB-4.14: | |
1643 | ||
1644 | * New native configurations | |
1645 | ||
1646 | x86 FreeBSD i[345]86-*-freebsd | |
1647 | x86 NetBSD i[345]86-*-netbsd | |
1648 | NS32k NetBSD ns32k-*-netbsd | |
1649 | Sparc NetBSD sparc-*-netbsd | |
1650 | ||
1651 | * New targets | |
1652 | ||
1653 | A29K VxWorks a29k-*-vxworks | |
1654 | HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro* | |
1655 | CPU32 EST-300 emulator m68*-*-est* | |
1656 | PowerPC ELF powerpc-*-elf | |
1657 | WDC 65816 w65-*-* | |
1658 | ||
1659 | * Alpha OSF/1 support for procfs | |
1660 | ||
1661 | GDB now supports procfs under OSF/1-2.x and higher, which makes it | |
1662 | possible to attach to running processes. As the mounting of the /proc | |
1663 | filesystem is optional on the Alpha, GDB automatically determines | |
1664 | the availability of /proc during startup. This can lead to problems | |
1665 | if /proc is unmounted after GDB has been started. | |
1666 | ||
1667 | * Arguments to user-defined commands | |
1668 | ||
1669 | User commands may accept up to 10 arguments separated by whitespace. | |
1670 | Arguments are accessed within the user command via $arg0..$arg9. A | |
1671 | trivial example: | |
1672 | define adder | |
1673 | print $arg0 + $arg1 + $arg2 | |
1674 | ||
1675 | To execute the command use: | |
1676 | adder 1 2 3 | |
1677 | ||
1678 | Defines the command "adder" which prints the sum of its three arguments. | |
1679 | Note the arguments are text substitutions, so they may reference variables, | |
1680 | use complex expressions, or even perform inferior function calls. | |
1681 | ||
1682 | * New `if' and `while' commands | |
1683 | ||
1684 | This makes it possible to write more sophisticated user-defined | |
1685 | commands. Both commands take a single argument, which is the | |
1686 | expression to evaluate, and must be followed by the commands to | |
1687 | execute, one per line, if the expression is nonzero, the list being | |
1688 | terminated by the word `end'. The `if' command list may include an | |
1689 | `else' word, which causes the following commands to be executed only | |
1690 | if the expression is zero. | |
1691 | ||
1692 | * Fortran source language mode | |
1693 | ||
1694 | GDB now includes partial support for Fortran 77. It will recognize | |
1695 | Fortran programs and can evaluate a subset of Fortran expressions, but | |
1696 | variables and functions may not be handled correctly. GDB will work | |
1697 | with G77, but does not yet know much about symbols emitted by other | |
1698 | Fortran compilers. | |
1699 | ||
1700 | * Better HPUX support | |
1701 | ||
1702 | Most debugging facilities now work on dynamic executables for HPPAs | |
1703 | running hpux9 or later. You can attach to running dynamically linked | |
1704 | processes, but by default the dynamic libraries will be read-only, so | |
1705 | for instance you won't be able to put breakpoints in them. To change | |
1706 | that behavior do the following before running the program: | |
1707 | ||
1708 | adb -w a.out | |
1709 | __dld_flags?W 0x5 | |
1710 | control-d | |
1711 | ||
1712 | This will cause the libraries to be mapped private and read-write. | |
1713 | To revert to the normal behavior, do this: | |
1714 | ||
1715 | adb -w a.out | |
1716 | __dld_flags?W 0x4 | |
1717 | control-d | |
1718 | ||
1719 | You cannot set breakpoints or examine data in the library until after | |
1720 | the library is loaded if the function/data symbols do not have | |
1721 | external linkage. | |
1722 | ||
1723 | GDB can now also read debug symbols produced by the HP C compiler on | |
1724 | HPPAs (sorry, no C++, Fortran or 68k support). | |
1725 | ||
1726 | * Target byte order now dynamically selectable | |
1727 | ||
1728 | You can choose which byte order to use with a target system, via the | |
1729 | commands "set endian big" and "set endian little", and you can see the | |
1730 | current setting by using "show endian". You can also give the command | |
1731 | "set endian auto", in which case GDB will use the byte order | |
1732 | associated with the executable. Currently, only embedded MIPS | |
1733 | configurations support dynamic selection of target byte order. | |
1734 | ||
1735 | * New DOS host serial code | |
1736 | ||
1737 | This version uses DPMI interrupts to handle buffered I/O, so you | |
1738 | no longer need to run asynctsr when debugging boards connected to | |
1739 | a PC's serial port. | |
1740 | ||
1741 | *** Changes in GDB-4.13: | |
1742 | ||
1743 | * New "complete" command | |
1744 | ||
1745 | This lists all the possible completions for the rest of the line, if it | |
1746 | were to be given as a command itself. This is intended for use by emacs. | |
1747 | ||
1748 | * Trailing space optional in prompt | |
1749 | ||
1750 | "set prompt" no longer adds a space for you after the prompt you set. This | |
1751 | allows you to set a prompt which ends in a space or one that does not. | |
1752 | ||
1753 | * Breakpoint hit counts | |
1754 | ||
1755 | "info break" now displays a count of the number of times the breakpoint | |
1756 | has been hit. This is especially useful in conjunction with "ignore"; you | |
1757 | can ignore a large number of breakpoint hits, look at the breakpoint info | |
1758 | to see how many times the breakpoint was hit, then run again, ignoring one | |
1759 | less than that number, and this will get you quickly to the last hit of | |
1760 | that breakpoint. | |
1761 | ||
1762 | * Ability to stop printing at NULL character | |
1763 | ||
1764 | "set print null-stop" will cause GDB to stop printing the characters of | |
1765 | an array when the first NULL is encountered. This is useful when large | |
1766 | arrays actually contain only short strings. | |
1767 | ||
1768 | * Shared library breakpoints | |
1769 | ||
1770 | In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set | |
1771 | breakpoints in shared libraries before the executable is run. | |
1772 | ||
1773 | * Hardware watchpoints | |
1774 | ||
1775 | There is a new hardware breakpoint for the watch command for sparclite | |
1776 | targets. See gdb/sparclite/hw_breakpoint.note. | |
1777 | ||
55241689 | 1778 | Hardware watchpoints are also now supported under GNU/Linux. |
c906108c SS |
1779 | |
1780 | * Annotations | |
1781 | ||
1782 | Annotations have been added. These are for use with graphical interfaces, | |
1783 | and are still experimental. Currently only gdba.el uses these. | |
1784 | ||
1785 | * Improved Irix 5 support | |
1786 | ||
1787 | GDB now works properly with Irix 5.2. | |
1788 | ||
1789 | * Improved HPPA support | |
1790 | ||
1791 | GDB now works properly with the latest GCC and GAS. | |
1792 | ||
1793 | * New native configurations | |
1794 | ||
1795 | Sequent PTX4 i[34]86-sequent-ptx4 | |
1796 | HPPA running OSF/1 hppa*-*-osf* | |
1797 | Atari TT running SVR4 m68*-*-sysv4* | |
1798 | RS/6000 LynxOS rs6000-*-lynxos* | |
1799 | ||
1800 | * New targets | |
1801 | ||
1802 | OS/9000 i[34]86-*-os9k | |
1803 | MIPS R4000 mips64*{,el}-*-{ecoff,elf} | |
1804 | Sparc64 sparc64-*-* | |
1805 | ||
1806 | * Hitachi SH7000 and E7000-PC ICE support | |
1807 | ||
1808 | There is now support for communicating with the Hitachi E7000-PC ICE. | |
1809 | This is available automatically when GDB is configured for the SH. | |
1810 | ||
1811 | * Fixes | |
1812 | ||
1813 | As usual, a variety of small fixes and improvements, both generic | |
1814 | and configuration-specific. See the ChangeLog for more detail. | |
1815 | ||
1816 | *** Changes in GDB-4.12: | |
1817 | ||
1818 | * Irix 5 is now supported | |
1819 | ||
1820 | * HPPA support | |
1821 | ||
1822 | GDB-4.12 on the HPPA has a number of changes which make it unable | |
1823 | to debug the output from the currently released versions of GCC and | |
1824 | GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release | |
1825 | of GCC and GAS, versions of these tools designed to work with GDB-4.12 | |
1826 | can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist. | |
1827 | ||
1828 | ||
1829 | *** Changes in GDB-4.11: | |
1830 | ||
1831 | * User visible changes: | |
1832 | ||
1833 | * Remote Debugging | |
1834 | ||
1835 | The "set remotedebug" option is now consistent between the mips remote | |
1836 | target, remote targets using the gdb-specific protocol, UDI (AMD's | |
1837 | debug protocol for the 29k) and the 88k bug monitor. It is now an | |
1838 | integer specifying a debug level (normally 0 or 1, but 2 means more | |
1839 | debugging info for the mips target). | |
1840 | ||
1841 | * DEC Alpha native support | |
1842 | ||
1843 | GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable | |
1844 | debug info, but GDB works fairly well with the DEC compiler and should | |
1845 | work with a future GCC release. See the README file for a few | |
1846 | Alpha-specific notes. | |
1847 | ||
1848 | * Preliminary thread implementation | |
1849 | ||
1850 | GDB now has preliminary thread support for both SGI/Irix and LynxOS. | |
1851 | ||
1852 | * LynxOS native and target support for 386 | |
1853 | ||
1854 | This release has been hosted on LynxOS 2.2, and also can be configured | |
1855 | to remotely debug programs running under LynxOS (see gdb/gdbserver/README | |
1856 | for details). | |
1857 | ||
1858 | * Improvements in C++ mangling/demangling. | |
1859 | ||
1860 | This release has much better g++ debugging, specifically in name | |
1861 | mangling/demangling, virtual function calls, print virtual table, | |
1862 | call methods, ...etc. | |
1863 | ||
1864 | *** Changes in GDB-4.10: | |
1865 | ||
1866 | * User visible changes: | |
1867 | ||
1868 | Remote debugging using the GDB-specific (`target remote') protocol now | |
1869 | supports the `load' command. This is only useful if you have some | |
1870 | other way of getting the stub to the target system, and you can put it | |
1871 | somewhere in memory where it won't get clobbered by the download. | |
1872 | ||
1873 | Filename completion now works. | |
1874 | ||
1875 | When run under emacs mode, the "info line" command now causes the | |
1876 | arrow to point to the line specified. Also, "info line" prints | |
1877 | addresses in symbolic form (as well as hex). | |
1878 | ||
1879 | All vxworks based targets now support a user settable option, called | |
1880 | vxworks-timeout. This option represents the number of seconds gdb | |
1881 | should wait for responses to rpc's. You might want to use this if | |
1882 | your vxworks target is, perhaps, a slow software simulator or happens | |
1883 | to be on the far side of a thin network line. | |
1884 | ||
1885 | * DEC alpha support | |
1886 | ||
1887 | This release contains support for using a DEC alpha as a GDB host for | |
1888 | cross debugging. Native alpha debugging is not supported yet. | |
1889 | ||
1890 | ||
1891 | *** Changes in GDB-4.9: | |
1892 | ||
1893 | * Testsuite | |
1894 | ||
1895 | This is the first GDB release which is accompanied by a matching testsuite. | |
1896 | The testsuite requires installation of dejagnu, which should be available | |
1897 | via ftp from most sites that carry GNU software. | |
1898 | ||
1899 | * C++ demangling | |
1900 | ||
1901 | 'Cfront' style demangling has had its name changed to 'ARM' style, to | |
1902 | emphasize that it was written from the specifications in the C++ Annotated | |
1903 | Reference Manual, not necessarily to be compatible with AT&T cfront. Despite | |
1904 | disclaimers, it still generated too much confusion with users attempting to | |
1905 | use gdb with AT&T cfront. | |
1906 | ||
1907 | * Simulators | |
1908 | ||
1909 | GDB now uses a standard remote interface to a simulator library. | |
1910 | So far, the library contains simulators for the Zilog Z8001/2, the | |
1911 | Hitachi H8/300, H8/500 and Super-H. | |
1912 | ||
1913 | * New targets supported | |
1914 | ||
1915 | H8/300 simulator h8300-hitachi-hms or h8300hms | |
1916 | H8/500 simulator h8500-hitachi-hms or h8500hms | |
1917 | SH simulator sh-hitachi-hms or sh | |
1918 | Z8000 simulator z8k-zilog-none or z8ksim | |
1919 | IDT MIPS board over serial line mips-idt-ecoff | |
1920 | ||
1921 | Cross-debugging to GO32 targets is supported. It requires a custom | |
1922 | version of the i386-stub.c module which is integrated with the | |
1923 | GO32 memory extender. | |
1924 | ||
1925 | * New remote protocols | |
1926 | ||
1927 | MIPS remote debugging protocol. | |
1928 | ||
1929 | * New source languages supported | |
1930 | ||
1931 | This version includes preliminary support for Chill, a Pascal like language | |
1932 | used by telecommunications companies. Chill support is also being integrated | |
1933 | into the GNU compiler, but we don't know when it will be publically available. | |
1934 | ||
1935 | ||
1936 | *** Changes in GDB-4.8: | |
1937 | ||
1938 | * HP Precision Architecture supported | |
1939 | ||
1940 | GDB now supports HP PA-RISC machines running HPUX. A preliminary | |
1941 | version of this support was available as a set of patches from the | |
1942 | University of Utah. GDB does not support debugging of programs | |
1943 | compiled with the HP compiler, because HP will not document their file | |
1944 | format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS | |
1945 | (as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z). | |
1946 | ||
1947 | Many problems in the preliminary version have been fixed. | |
1948 | ||
1949 | * Faster and better demangling | |
1950 | ||
1951 | We have improved template demangling and fixed numerous bugs in the GNU style | |
1952 | demangler. It can now handle type modifiers such as `static' or `const'. Wide | |
1953 | character types (wchar_t) are now supported. Demangling of each symbol is now | |
1954 | only done once, and is cached when the symbol table for a file is read in. | |
1955 | This results in a small increase in memory usage for C programs, a moderate | |
1956 | increase in memory usage for C++ programs, and a fantastic speedup in | |
1957 | symbol lookups. | |
1958 | ||
1959 | `Cfront' style demangling still doesn't work with AT&T cfront. It was written | |
1960 | from the specifications in the Annotated Reference Manual, which AT&T's | |
1961 | compiler does not actually implement. | |
1962 | ||
1963 | * G++ multiple inheritance compiler problem | |
1964 | ||
1965 | In the 2.3.2 release of gcc/g++, how the compiler resolves multiple | |
1966 | inheritance lattices was reworked to properly discover ambiguities. We | |
1967 | recently found an example which causes this new algorithm to fail in a | |
1968 | very subtle way, producing bad debug information for those classes. | |
1969 | The file 'gcc.patch' (in this directory) can be applied to gcc to | |
1970 | circumvent the problem. A future GCC release will contain a complete | |
1971 | fix. | |
1972 | ||
1973 | The previous G++ debug info problem (mentioned below for the gdb-4.7 | |
1974 | release) is fixed in gcc version 2.3.2. | |
1975 | ||
1976 | * Improved configure script | |
1977 | ||
1978 | The `configure' script will now attempt to guess your system type if | |
1979 | you don't supply a host system type. The old scheme of supplying a | |
1980 | host system triplet is preferable over using this. All the magic is | |
1981 | done in the new `config.guess' script. Examine it for details. | |
1982 | ||
1983 | We have also brought our configure script much more in line with the FSF's | |
1984 | version. It now supports the --with-xxx options. In particular, | |
1985 | `--with-minimal-bfd' can be used to make the GDB binary image smaller. | |
1986 | The resulting GDB will not be able to read arbitrary object file formats -- | |
1987 | only the format ``expected'' to be used on the configured target system. | |
1988 | We hope to make this the default in a future release. | |
1989 | ||
1990 | * Documentation improvements | |
1991 | ||
1992 | There's new internal documentation on how to modify GDB, and how to | |
1993 | produce clean changes to the code. We implore people to read it | |
1994 | before submitting changes. | |
1995 | ||
1996 | The GDB manual uses new, sexy Texinfo conditionals, rather than arcane | |
1997 | M4 macros. The new texinfo.tex is provided in this release. Pre-built | |
1998 | `info' files are also provided. To build `info' files from scratch, | |
1999 | you will need the latest `makeinfo' release, which will be available in | |
2000 | a future texinfo-X.Y release. | |
2001 | ||
2002 | *NOTE* The new texinfo.tex can cause old versions of TeX to hang. | |
2003 | We're not sure exactly which versions have this problem, but it has | |
2004 | been seen in 3.0. We highly recommend upgrading to TeX version 3.141 | |
2005 | or better. If that isn't possible, there is a patch in | |
2006 | `texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work | |
2007 | around this problem. | |
2008 | ||
2009 | * New features | |
2010 | ||
2011 | GDB now supports array constants that can be used in expressions typed in by | |
2012 | the user. The syntax is `{element, element, ...}'. Ie: you can now type | |
2013 | `print {1, 2, 3}', and it will build up an array in memory malloc'd in | |
2014 | the target program. | |
2015 | ||
2016 | The new directory `gdb/sparclite' contains a program that demonstrates | |
2017 | how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor. | |
2018 | ||
2019 | * New native hosts supported | |
2020 | ||
2021 | HP/PA-RISC under HPUX using GNU tools hppa1.1-hp-hpux | |
2022 | 386 CPUs running SCO Unix 3.2v4 i386-unknown-sco3.2v4 | |
2023 | ||
2024 | * New targets supported | |
2025 | ||
2026 | AMD 29k family via UDI a29k-amd-udi or udi29k | |
2027 | ||
2028 | * New file formats supported | |
2029 | ||
2030 | BFD now supports reading HP/PA-RISC executables (SOM file format?), | |
2031 | HPUX core files, and SCO 3.2v2 core files. | |
2032 | ||
2033 | * Major bug fixes | |
2034 | ||
2035 | Attaching to processes now works again; thanks for the many bug reports. | |
2036 | ||
2037 | We have also stomped on a bunch of core dumps caused by | |
2038 | printf_filtered("%s") problems. | |
2039 | ||
2040 | We eliminated a copyright problem on the rpc and ptrace header files | |
2041 | for VxWorks, which was discovered at the last minute during the 4.7 | |
2042 | release. You should now be able to build a VxWorks GDB. | |
2043 | ||
2044 | You can now interrupt gdb while an attached process is running. This | |
2045 | will cause the attached process to stop, and give control back to GDB. | |
2046 | ||
2047 | We fixed problems caused by using too many file descriptors | |
2048 | for reading symbols from object files and libraries. This was | |
2049 | especially a problem for programs that used many (~100) shared | |
2050 | libraries. | |
2051 | ||
2052 | The `step' command now only enters a subroutine if there is line number | |
2053 | information for the subroutine. Otherwise it acts like the `next' | |
2054 | command. Previously, `step' would enter subroutines if there was | |
2055 | any debugging information about the routine. This avoids problems | |
2056 | when using `cc -g1' on MIPS machines. | |
2057 | ||
2058 | * Internal improvements | |
2059 | ||
2060 | GDB's internal interfaces have been improved to make it easier to support | |
2061 | debugging of multiple languages in the future. | |
2062 | ||
2063 | GDB now uses a common structure for symbol information internally. | |
2064 | Minimal symbols (derived from linkage symbols in object files), partial | |
2065 | symbols (from a quick scan of debug information), and full symbols | |
2066 | contain a common subset of information, making it easier to write | |
2067 | shared code that handles any of them. | |
2068 | ||
2069 | * New command line options | |
2070 | ||
2071 | We now accept --silent as an alias for --quiet. | |
2072 | ||
2073 | * Mmalloc licensing | |
2074 | ||
2075 | The memory-mapped-malloc library is now licensed under the GNU Library | |
2076 | General Public License. | |
2077 | ||
2078 | *** Changes in GDB-4.7: | |
2079 | ||
2080 | * Host/native/target split | |
2081 | ||
2082 | GDB has had some major internal surgery to untangle the support for | |
2083 | hosts and remote targets. Now, when you configure GDB for a remote | |
2084 | target, it will no longer load in all of the support for debugging | |
2085 | local programs on the host. When fully completed and tested, this will | |
2086 | ensure that arbitrary host/target combinations are possible. | |
2087 | ||
2088 | The primary conceptual shift is to separate the non-portable code in | |
2089 | GDB into three categories. Host specific code is required any time GDB | |
2090 | is compiled on that host, regardless of the target. Target specific | |
2091 | code relates to the peculiarities of the target, but can be compiled on | |
2092 | any host. Native specific code is everything else: it can only be | |
2093 | built when the host and target are the same system. Child process | |
2094 | handling and core file support are two common `native' examples. | |
2095 | ||
2096 | GDB's use of /proc for controlling Unix child processes is now cleaner. | |
2097 | It has been split out into a single module under the `target_ops' vector, | |
2098 | plus two native-dependent functions for each system that uses /proc. | |
2099 | ||
2100 | * New hosts supported | |
2101 | ||
2102 | HP/Apollo 68k (under the BSD domain) m68k-apollo-bsd or apollo68bsd | |
2103 | 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd | |
2104 | 386 CPUs running SCO Unix i386-unknown-scosysv322 or i386sco | |
2105 | ||
2106 | * New targets supported | |
2107 | ||
2108 | Fujitsu SPARClite sparclite-fujitsu-none or sparclite | |
2109 | 68030 and CPU32 m68030-*-*, m68332-*-* | |
2110 | ||
2111 | * New native hosts supported | |
2112 | ||
2113 | 386 CPUs running various BSD ports i386-unknown-bsd or 386bsd | |
2114 | (386bsd is not well tested yet) | |
2115 | 386 CPUs running SCO Unix i386-unknown-scosysv322 or sco | |
2116 | ||
2117 | * New file formats supported | |
2118 | ||
2119 | BFD now supports COFF files for the Zilog Z8000 microprocessor. It | |
2120 | supports reading of `a.out.adobe' object files, which are an a.out | |
2121 | format extended with minimal information about multiple sections. | |
2122 | ||
2123 | * New commands | |
2124 | ||
2125 | `show copying' is the same as the old `info copying'. | |
2126 | `show warranty' is the same as `info warrantee'. | |
2127 | These were renamed for consistency. The old commands continue to work. | |
2128 | ||
2129 | `info handle' is a new alias for `info signals'. | |
2130 | ||
2131 | You can now define pre-command hooks, which attach arbitrary command | |
2132 | scripts to any command. The commands in the hook will be executed | |
2133 | prior to the user's command. You can also create a hook which will be | |
2134 | executed whenever the program stops. See gdb.texinfo. | |
2135 | ||
2136 | * C++ improvements | |
2137 | ||
2138 | We now deal with Cfront style name mangling, and can even extract type | |
2139 | info from mangled symbols. GDB can automatically figure out which | |
2140 | symbol mangling style your C++ compiler uses. | |
2141 | ||
2142 | Calling of methods and virtual functions has been improved as well. | |
2143 | ||
2144 | * Major bug fixes | |
2145 | ||
2146 | The crash that occured when debugging Sun Ansi-C compiled binaries is | |
2147 | fixed. This was due to mishandling of the extra N_SO stabs output | |
2148 | by the compiler. | |
2149 | ||
2150 | We also finally got Ultrix 4.2 running in house, and fixed core file | |
2151 | support, with help from a dozen people on the net. | |
2152 | ||
2153 | John M. Farrell discovered that the reason that single-stepping was so | |
2154 | slow on all of the Mips based platforms (primarily SGI and DEC) was | |
2155 | that we were trying to demangle and lookup a symbol used for internal | |
2156 | purposes on every instruction that was being stepped through. Changing | |
2157 | the name of that symbol so that it couldn't be mistaken for a C++ | |
2158 | mangled symbol sped things up a great deal. | |
2159 | ||
2160 | Rich Pixley sped up symbol lookups in general by getting much smarter | |
2161 | about when C++ symbol mangling is necessary. This should make symbol | |
2162 | completion (TAB on the command line) much faster. It's not as fast as | |
2163 | we'd like, but it's significantly faster than gdb-4.6. | |
2164 | ||
2165 | * AMD 29k support | |
2166 | ||
2167 | A new user controllable variable 'call_scratch_address' can | |
2168 | specify the location of a scratch area to be used when GDB | |
2169 | calls a function in the target. This is necessary because the | |
2170 | usual method of putting the scratch area on the stack does not work | |
2171 | in systems that have separate instruction and data spaces. | |
2172 | ||
2173 | We integrated changes to support the 29k UDI (Universal Debugger | |
2174 | Interface), but discovered at the last minute that we didn't have all | |
2175 | of the appropriate copyright paperwork. We are working with AMD to | |
2176 | resolve this, and hope to have it available soon. | |
2177 | ||
2178 | * Remote interfaces | |
2179 | ||
2180 | We have sped up the remote serial line protocol, especially for targets | |
2181 | with lots of registers. It now supports a new `expedited status' ('T') | |
2182 | message which can be used in place of the existing 'S' status message. | |
2183 | This allows the remote stub to send only the registers that GDB | |
2184 | needs to make a quick decision about single-stepping or conditional | |
2185 | breakpoints, eliminating the need to fetch the entire register set for | |
2186 | each instruction being stepped through. | |
2187 | ||
2188 | The GDB remote serial protocol now implements a write-through cache for | |
2189 | registers, only re-reading the registers if the target has run. | |
2190 | ||
2191 | There is also a new remote serial stub for SPARC processors. You can | |
2192 | find it in gdb-4.7/gdb/sparc-stub.c. This was written to support the | |
2193 | Fujitsu SPARClite processor, but will run on any stand-alone SPARC | |
2194 | processor with a serial port. | |
2195 | ||
2196 | * Configuration | |
2197 | ||
2198 | Configure.in files have become much easier to read and modify. A new | |
2199 | `table driven' format makes it more obvious what configurations are | |
2200 | supported, and what files each one uses. | |
2201 | ||
2202 | * Library changes | |
2203 | ||
2204 | There is a new opcodes library which will eventually contain all of the | |
2205 | disassembly routines and opcode tables. At present, it only contains | |
2206 | Sparc and Z8000 routines. This will allow the assembler, debugger, and | |
2207 | disassembler (binutils/objdump) to share these routines. | |
2208 | ||
2209 | The libiberty library is now copylefted under the GNU Library General | |
2210 | Public License. This allows more liberal use, and was done so libg++ | |
2211 | can use it. This makes no difference to GDB, since the Library License | |
2212 | grants all the rights from the General Public License. | |
2213 | ||
2214 | * Documentation | |
2215 | ||
2216 | The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete | |
2217 | reference to the stabs symbol info used by the debugger. It is (as far | |
2218 | as we know) the only published document on this fascinating topic. We | |
2219 | encourage you to read it, compare it to the stabs information on your | |
2220 | system, and send improvements on the document in general (to | |
2221 | bug-gdb@prep.ai.mit.edu). | |
2222 | ||
2223 | And, of course, many bugs have been fixed. | |
2224 | ||
2225 | ||
2226 | *** Changes in GDB-4.6: | |
2227 | ||
2228 | * Better support for C++ function names | |
2229 | ||
2230 | GDB now accepts as input the "demangled form" of C++ overloaded function | |
2231 | names and member function names, and can do command completion on such names | |
2232 | (using TAB, TAB-TAB, and ESC-?). The names have to be quoted with a pair of | |
2233 | single quotes. Examples are 'func (int, long)' and 'obj::operator==(obj&)'. | |
2234 | Make use of command completion, it is your friend. | |
2235 | ||
2236 | GDB also now accepts a variety of C++ mangled symbol formats. They are | |
2237 | the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style. | |
2238 | You can tell GDB which format to use by doing a 'set demangle-style {gnu, | |
2239 | lucid, cfront, auto}'. 'gnu' is the default. Do a 'set demangle-style foo' | |
2240 | for the list of formats. | |
2241 | ||
2242 | * G++ symbol mangling problem | |
2243 | ||
2244 | Recent versions of gcc have a bug in how they emit debugging information for | |
2245 | C++ methods (when using dbx-style stabs). The file 'gcc.patch' (in this | |
2246 | directory) can be applied to gcc to fix the problem. Alternatively, if you | |
2247 | can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The | |
2248 | usual symptom is difficulty with setting breakpoints on methods. GDB complains | |
2249 | about the method being non-existent. (We believe that version 2.2.2 of GCC has | |
2250 | this problem.) | |
2251 | ||
2252 | * New 'maintenance' command | |
2253 | ||
2254 | All of the commands related to hacking GDB internals have been moved out of | |
2255 | the main command set, and now live behind the 'maintenance' command. This | |
2256 | can also be abbreviated as 'mt'. The following changes were made: | |
2257 | ||
2258 | dump-me -> maintenance dump-me | |
2259 | info all-breakpoints -> maintenance info breakpoints | |
2260 | printmsyms -> maintenance print msyms | |
2261 | printobjfiles -> maintenance print objfiles | |
2262 | printpsyms -> maintenance print psymbols | |
2263 | printsyms -> maintenance print symbols | |
2264 | ||
2265 | The following commands are new: | |
2266 | ||
2267 | maintenance demangle Call internal GDB demangler routine to | |
2268 | demangle a C++ link name and prints the result. | |
2269 | maintenance print type Print a type chain for a given symbol | |
2270 | ||
2271 | * Change to .gdbinit file processing | |
2272 | ||
2273 | We now read the $HOME/.gdbinit file before processing the argv arguments | |
2274 | (e.g. reading symbol files or core files). This allows global parameters to | |
2275 | be set, which will apply during the symbol reading. The ./.gdbinit is still | |
2276 | read after argv processing. | |
2277 | ||
2278 | * New hosts supported | |
2279 | ||
2280 | Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2 | |
2281 | ||
55241689 | 2282 | GNU/Linux support i386-unknown-linux or linux |
c906108c SS |
2283 | |
2284 | We are also including code to support the HP/PA running BSD and HPUX. This | |
2285 | is almost guaranteed not to work, as we didn't have time to test or build it | |
2286 | for this release. We are including it so that the more adventurous (or | |
2287 | masochistic) of you can play with it. We also had major problems with the | |
2288 | fact that the compiler that we got from HP doesn't support the -g option. | |
2289 | It costs extra. | |
2290 | ||
2291 | * New targets supported | |
2292 | ||
2293 | Hitachi H8/300 h8300-hitachi-hms or h8300hms | |
2294 | ||
2295 | * More smarts about finding #include files | |
2296 | ||
2297 | GDB now remembers the compilation directory for all include files, and for | |
2298 | all files from which C is generated (like yacc and lex sources). This | |
2299 | greatly improves GDB's ability to find yacc/lex sources, and include files, | |
2300 | especially if you are debugging your program from a directory different from | |
2301 | the one that contains your sources. | |
2302 | ||
2303 | We also fixed a bug which caused difficulty with listing and setting | |
2304 | breakpoints in include files which contain C code. (In the past, you had to | |
2305 | try twice in order to list an include file that you hadn't looked at before.) | |
2306 | ||
2307 | * Interesting infernals change | |
2308 | ||
2309 | GDB now deals with arbitrary numbers of sections, where the symbols for each | |
2310 | section must be relocated relative to that section's landing place in the | |
2311 | target's address space. This work was needed to support ELF with embedded | |
2312 | stabs used by Solaris-2.0. | |
2313 | ||
2314 | * Bug fixes (of course!) | |
2315 | ||
2316 | There have been loads of fixes for the following things: | |
2317 | mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k, | |
2318 | i960, stabs, DOS(GO32), procfs, etc... | |
2319 | ||
2320 | See the ChangeLog for details. | |
2321 | ||
2322 | *** Changes in GDB-4.5: | |
2323 | ||
2324 | * New machines supported (host and target) | |
2325 | ||
2326 | IBM RS6000 running AIX rs6000-ibm-aix or rs6000 | |
2327 | ||
2328 | SGI Irix-4.x mips-sgi-irix4 or iris4 | |
2329 | ||
2330 | * New malloc package | |
2331 | ||
2332 | GDB now uses a new memory manager called mmalloc, based on gmalloc. | |
2333 | Mmalloc is capable of handling mutiple heaps of memory. It is also | |
2334 | capable of saving a heap to a file, and then mapping it back in later. | |
2335 | This can be used to greatly speedup the startup of GDB by using a | |
2336 | pre-parsed symbol table which lives in a mmalloc managed heap. For | |
2337 | more details, please read mmalloc/mmalloc.texi. | |
2338 | ||
2339 | * info proc | |
2340 | ||
2341 | The 'info proc' command (SVR4 only) has been enhanced quite a bit. See | |
2342 | 'help info proc' for details. | |
2343 | ||
2344 | * MIPS ecoff symbol table format | |
2345 | ||
2346 | The code that reads MIPS symbol table format is now supported on all hosts. | |
2347 | Thanks to MIPS for releasing the sym.h and symconst.h files to make this | |
2348 | possible. | |
2349 | ||
2350 | * File name changes for MS-DOS | |
2351 | ||
2352 | Many files in the config directories have been renamed to make it easier to | |
2353 | support GDB on MS-DOSe systems (which have very restrictive file name | |
2354 | conventions :-( ). MS-DOSe host support (under DJ Delorie's GO32 | |
2355 | environment) is close to working but has some remaining problems. Note | |
2356 | that debugging of DOS programs is not supported, due to limitations | |
2357 | in the ``operating system'', but it can be used to host cross-debugging. | |
2358 | ||
2359 | * Cross byte order fixes | |
2360 | ||
2361 | Many fixes have been made to support cross debugging of Sparc and MIPS | |
2362 | targets from hosts whose byte order differs. | |
2363 | ||
2364 | * New -mapped and -readnow options | |
2365 | ||
2366 | If memory-mapped files are available on your system through the 'mmap' | |
2367 | system call, you can use the -mapped option on the `file' or | |
2368 | `symbol-file' commands to cause GDB to write the symbols from your | |
2369 | program into a reusable file. If the program you are debugging is | |
2370 | called `/path/fred', the mapped symbol file will be `./fred.syms'. | |
2371 | Future GDB debugging sessions will notice the presence of this file, | |
2372 | and will quickly map in symbol information from it, rather than reading | |
2373 | the symbol table from the executable program. Using the '-mapped' | |
2374 | option in a GDB `file' or `symbol-file' command has the same effect as | |
2375 | starting GDB with the '-mapped' command-line option. | |
2376 | ||
2377 | You can cause GDB to read the entire symbol table immediately by using | |
2378 | the '-readnow' option with any of the commands that load symbol table | |
2379 | information (or on the GDB command line). This makes the command | |
2380 | slower, but makes future operations faster. | |
2381 | ||
2382 | The -mapped and -readnow options are typically combined in order to | |
2383 | build a `fred.syms' file that contains complete symbol information. | |
2384 | A simple GDB invocation to do nothing but build a `.syms' file for future | |
2385 | use is: | |
2386 | ||
2387 | gdb -batch -nx -mapped -readnow programname | |
2388 | ||
2389 | The `.syms' file is specific to the host machine on which GDB is run. | |
2390 | It holds an exact image of GDB's internal symbol table. It cannot be | |
2391 | shared across multiple host platforms. | |
2392 | ||
2393 | * longjmp() handling | |
2394 | ||
2395 | GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and | |
2396 | siglongjmp() without losing control. This feature has not yet been ported to | |
2397 | all systems. It currently works on many 386 platforms, all MIPS-based | |
2398 | platforms (SGI, DECstation, etc), and Sun3/4. | |
2399 | ||
2400 | * Solaris 2.0 | |
2401 | ||
2402 | Preliminary work has been put in to support the new Solaris OS from Sun. At | |
2403 | this time, it can control and debug processes, but it is not capable of | |
2404 | reading symbols. | |
2405 | ||
2406 | * Bug fixes | |
2407 | ||
2408 | As always, many many bug fixes. The major areas were with g++, and mipsread. | |
2409 | People using the MIPS-based platforms should experience fewer mysterious | |
2410 | crashes and trashed symbol tables. | |
2411 | ||
2412 | *** Changes in GDB-4.4: | |
2413 | ||
2414 | * New machines supported (host and target) | |
2415 | ||
2416 | SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco | |
2417 | (except core files) | |
2418 | BSD Reno on Vax vax-dec-bsd | |
2419 | Ultrix on Vax vax-dec-ultrix | |
2420 | ||
2421 | * New machines supported (target) | |
2422 | ||
2423 | AMD 29000 embedded, using EBMON a29k-none-none | |
2424 | ||
2425 | * C++ support | |
2426 | ||
2427 | GDB continues to improve its handling of C++. `References' work better. | |
2428 | The demangler has also been improved, and now deals with symbols mangled as | |
2429 | per the Annotated C++ Reference Guide. | |
2430 | ||
2431 | GDB also now handles `stabs' symbol information embedded in MIPS | |
2432 | `ecoff' symbol tables. Since the ecoff format was not easily | |
2433 | extensible to handle new languages such as C++, this appeared to be a | |
2434 | good way to put C++ debugging info into MIPS binaries. This option | |
2435 | will be supported in the GNU C compiler, version 2, when it is | |
2436 | released. | |
2437 | ||
2438 | * New features for SVR4 | |
2439 | ||
2440 | GDB now handles SVR4 shared libraries, in the same fashion as SunOS | |
2441 | shared libraries. Debugging dynamically linked programs should present | |
2442 | only minor differences from debugging statically linked programs. | |
2443 | ||
2444 | The `info proc' command will print out information about any process | |
2445 | on an SVR4 system (including the one you are debugging). At the moment, | |
2446 | it prints the address mappings of the process. | |
2447 | ||
2448 | If you bring up GDB on another SVR4 system, please send mail to | |
2449 | bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any). | |
2450 | ||
2451 | * Better dynamic linking support in SunOS | |
2452 | ||
2453 | Reading symbols from shared libraries which contain debugging symbols | |
2454 | now works properly. However, there remain issues such as automatic | |
2455 | skipping of `transfer vector' code during function calls, which | |
2456 | make it harder to debug code in a shared library, than to debug the | |
2457 | same code linked statically. | |
2458 | ||
2459 | * New Getopt | |
2460 | ||
2461 | GDB is now using the latest `getopt' routines from the FSF. This | |
2462 | version accepts the -- prefix for options with long names. GDB will | |
2463 | continue to accept the old forms (-option and +option) as well. | |
2464 | Various single letter abbreviations for options have been explicity | |
2465 | added to the option table so that they won't get overshadowed in the | |
2466 | future by other options that begin with the same letter. | |
2467 | ||
2468 | * Bugs fixed | |
2469 | ||
2470 | The `cleanup_undefined_types' bug that many of you noticed has been squashed. | |
2471 | Many assorted bugs have been handled. Many more remain to be handled. | |
2472 | See the various ChangeLog files (primarily in gdb and bfd) for details. | |
2473 | ||
2474 | ||
2475 | *** Changes in GDB-4.3: | |
2476 | ||
2477 | * New machines supported (host and target) | |
2478 | ||
2479 | Amiga 3000 running Amix m68k-cbm-svr4 or amix | |
2480 | NCR 3000 386 running SVR4 i386-ncr-svr4 or ncr3000 | |
2481 | Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88 | |
2482 | ||
2483 | * Almost SCO Unix support | |
2484 | ||
2485 | We had hoped to support: | |
2486 | SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco | |
2487 | (except for core file support), but we discovered very late in the release | |
2488 | that it has problems with process groups that render gdb unusable. Sorry | |
2489 | about that. I encourage people to fix it and post the fixes. | |
2490 | ||
2491 | * Preliminary ELF and DWARF support | |
2492 | ||
2493 | GDB can read ELF object files on System V Release 4, and can handle | |
2494 | debugging records for C, in DWARF format, in ELF files. This support | |
2495 | is preliminary. If you bring up GDB on another SVR4 system, please | |
2496 | send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were | |
2497 | reqired (if any). | |
2498 | ||
2499 | * New Readline | |
2500 | ||
2501 | GDB now uses the latest `readline' library. One user-visible change | |
2502 | is that two tabs will list possible command completions, which previously | |
2503 | required typing M-? (meta-question mark, or ESC ?). | |
2504 | ||
2505 | * Bugs fixed | |
2506 | ||
2507 | The `stepi' bug that many of you noticed has been squashed. | |
2508 | Many bugs in C++ have been handled. Many more remain to be handled. | |
2509 | See the various ChangeLog files (primarily in gdb and bfd) for details. | |
2510 | ||
2511 | * State of the MIPS world (in case you wondered): | |
2512 | ||
2513 | GDB can understand the symbol tables emitted by the compilers | |
2514 | supplied by most vendors of MIPS-based machines, including DEC. These | |
2515 | symbol tables are in a format that essentially nobody else uses. | |
2516 | ||
2517 | Some versions of gcc come with an assembler post-processor called | |
2518 | mips-tfile. This program is required if you want to do source-level | |
2519 | debugging of gcc-compiled programs. I believe FSF does not ship | |
2520 | mips-tfile with gcc version 1, but it will eventually come with gcc | |
2521 | version 2. | |
2522 | ||
2523 | Debugging of g++ output remains a problem. g++ version 1.xx does not | |
2524 | really support it at all. (If you're lucky, you should be able to get | |
2525 | line numbers and stack traces to work, but no parameters or local | |
2526 | variables.) With some work it should be possible to improve the | |
2527 | situation somewhat. | |
2528 | ||
2529 | When gcc version 2 is released, you will have somewhat better luck. | |
2530 | However, even then you will get confusing results for inheritance and | |
2531 | methods. | |
2532 | ||
2533 | We will eventually provide full debugging of g++ output on | |
2534 | DECstations. This will probably involve some kind of stabs-in-ecoff | |
2535 | encapulation, but the details have not been worked out yet. | |
2536 | ||
2537 | ||
2538 | *** Changes in GDB-4.2: | |
2539 | ||
2540 | * Improved configuration | |
2541 | ||
2542 | Only one copy of `configure' exists now, and it is not self-modifying. | |
2543 | Porting BFD is simpler. | |
2544 | ||
2545 | * Stepping improved | |
2546 | ||
2547 | The `step' and `next' commands now only stop at the first instruction | |
2548 | of a source line. This prevents the multiple stops that used to occur | |
2549 | in switch statements, for-loops, etc. `Step' continues to stop if a | |
2550 | function that has debugging information is called within the line. | |
2551 | ||
2552 | * Bug fixing | |
2553 | ||
2554 | Lots of small bugs fixed. More remain. | |
2555 | ||
2556 | * New host supported (not target) | |
2557 | ||
2558 | Intel 386 PC clone running Mach i386-none-mach | |
2559 | ||
2560 | ||
2561 | *** Changes in GDB-4.1: | |
2562 | ||
2563 | * Multiple source language support | |
2564 | ||
2565 | GDB now has internal scaffolding to handle several source languages. | |
2566 | It determines the type of each source file from its filename extension, | |
2567 | and will switch expression parsing and number formatting to match the | |
2568 | language of the function in the currently selected stack frame. | |
2569 | You can also specifically set the language to be used, with | |
2570 | `set language c' or `set language modula-2'. | |
2571 | ||
2572 | * GDB and Modula-2 | |
2573 | ||
2574 | GDB now has preliminary support for the GNU Modula-2 compiler, | |
2575 | currently under development at the State University of New York at | |
2576 | Buffalo. Development of both GDB and the GNU Modula-2 compiler will | |
2577 | continue through the fall of 1991 and into 1992. | |
2578 | ||
2579 | Other Modula-2 compilers are currently not supported, and attempting to | |
2580 | debug programs compiled with them will likely result in an error as the | |
2581 | symbol table is read. Feel free to work on it, though! | |
2582 | ||
2583 | There are hooks in GDB for strict type checking and range checking, | |
2584 | in the `Modula-2 philosophy', but they do not currently work. | |
2585 | ||
2586 | * set write on/off | |
2587 | ||
2588 | GDB can now write to executable and core files (e.g. patch | |
2589 | a variable's value). You must turn this switch on, specify | |
2590 | the file ("exec foo" or "core foo"), *then* modify it, e.g. | |
2591 | by assigning a new value to a variable. Modifications take | |
2592 | effect immediately. | |
2593 | ||
2594 | * Automatic SunOS shared library reading | |
2595 | ||
2596 | When you run your program, GDB automatically determines where its | |
2597 | shared libraries (if any) have been loaded, and reads their symbols. | |
2598 | The `share' command is no longer needed. This also works when | |
2599 | examining core files. | |
2600 | ||
2601 | * set listsize | |
2602 | ||
2603 | You can specify the number of lines that the `list' command shows. | |
2604 | The default is 10. | |
2605 | ||
2606 | * New machines supported (host and target) | |
2607 | ||
2608 | SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris | |
2609 | Sony NEWS (68K) running NEWSOS 3.x: m68k-sony-sysv or news | |
2610 | Ultracomputer (29K) running Sym1: a29k-nyu-sym1 or ultra3 | |
2611 | ||
2612 | * New hosts supported (not targets) | |
2613 | ||
2614 | IBM RT/PC: romp-ibm-aix or rtpc | |
2615 | ||
2616 | * New targets supported (not hosts) | |
2617 | ||
2618 | AMD 29000 embedded with COFF a29k-none-coff | |
2619 | AMD 29000 embedded with a.out a29k-none-aout | |
2620 | Ultracomputer remote kernel debug a29k-nyu-kern | |
2621 | ||
2622 | * New remote interfaces | |
2623 | ||
2624 | AMD 29000 Adapt | |
2625 | AMD 29000 Minimon | |
2626 | ||
2627 | ||
2628 | *** Changes in GDB-4.0: | |
2629 | ||
2630 | * New Facilities | |
2631 | ||
2632 | Wide output is wrapped at good places to make the output more readable. | |
2633 | ||
2634 | Gdb now supports cross-debugging from a host machine of one type to a | |
2635 | target machine of another type. Communication with the target system | |
2636 | is over serial lines. The ``target'' command handles connecting to the | |
2637 | remote system; the ``load'' command will download a program into the | |
2638 | remote system. Serial stubs for the m68k and i386 are provided. Gdb | |
2639 | also supports debugging of realtime processes running under VxWorks, | |
2640 | using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger | |
2641 | stub on the target system. | |
2642 | ||
2643 | New CPUs supported include the AMD 29000 and Intel 960. | |
2644 | ||
2645 | GDB now reads object files and symbol tables via a ``binary file'' | |
2646 | library, which allows a single copy of GDB to debug programs of multiple | |
2647 | object file types such as a.out and coff. | |
2648 | ||
2649 | There is now a GDB reference card in "doc/refcard.tex". (Make targets | |
2650 | refcard.dvi and refcard.ps are available to format it). | |
2651 | ||
2652 | ||
2653 | * Control-Variable user interface simplified | |
2654 | ||
2655 | All variables that control the operation of the debugger can be set | |
2656 | by the ``set'' command, and displayed by the ``show'' command. | |
2657 | ||
2658 | For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>. | |
2659 | ``Show prompt'' produces the response: | |
2660 | Gdb's prompt is new-gdb=>. | |
2661 | ||
2662 | What follows are the NEW set commands. The command ``help set'' will | |
2663 | print a complete list of old and new set commands. ``help set FOO'' | |
2664 | will give a longer description of the variable FOO. ``show'' will show | |
2665 | all of the variable descriptions and their current settings. | |
2666 | ||
2667 | confirm on/off: Enables warning questions for operations that are | |
2668 | hard to recover from, e.g. rerunning the program while | |
2669 | it is already running. Default is ON. | |
2670 | ||
2671 | editing on/off: Enables EMACS style command line editing | |
2672 | of input. Previous lines can be recalled with | |
2673 | control-P, the current line can be edited with control-B, | |
2674 | you can search for commands with control-R, etc. | |
2675 | Default is ON. | |
2676 | ||
2677 | history filename NAME: NAME is where the gdb command history | |
2678 | will be stored. The default is .gdb_history, | |
2679 | or the value of the environment variable | |
2680 | GDBHISTFILE. | |
2681 | ||
2682 | history size N: The size, in commands, of the command history. The | |
2683 | default is 256, or the value of the environment variable | |
2684 | HISTSIZE. | |
2685 | ||
2686 | history save on/off: If this value is set to ON, the history file will | |
2687 | be saved after exiting gdb. If set to OFF, the | |
2688 | file will not be saved. The default is OFF. | |
2689 | ||
2690 | history expansion on/off: If this value is set to ON, then csh-like | |
2691 | history expansion will be performed on | |
2692 | command line input. The default is OFF. | |
2693 | ||
2694 | radix N: Sets the default radix for input and output. It can be set | |
2695 | to 8, 10, or 16. Note that the argument to "radix" is interpreted | |
2696 | in the current radix, so "set radix 10" is always a no-op. | |
2697 | ||
2698 | height N: This integer value is the number of lines on a page. Default | |
2699 | is 24, the current `stty rows'' setting, or the ``li#'' | |
2700 | setting from the termcap entry matching the environment | |
2701 | variable TERM. | |
2702 | ||
2703 | width N: This integer value is the number of characters on a line. | |
2704 | Default is 80, the current `stty cols'' setting, or the ``co#'' | |
2705 | setting from the termcap entry matching the environment | |
2706 | variable TERM. | |
2707 | ||
2708 | Note: ``set screensize'' is obsolete. Use ``set height'' and | |
2709 | ``set width'' instead. | |
2710 | ||
2711 | print address on/off: Print memory addresses in various command displays, | |
2712 | such as stack traces and structure values. Gdb looks | |
2713 | more ``symbolic'' if you turn this off; it looks more | |
2714 | ``machine level'' with it on. Default is ON. | |
2715 | ||
2716 | print array on/off: Prettyprint arrays. New convenient format! Default | |
2717 | is OFF. | |
2718 | ||
2719 | print demangle on/off: Print C++ symbols in "source" form if on, | |
2720 | "raw" form if off. | |
2721 | ||
2722 | print asm-demangle on/off: Same, for assembler level printouts | |
2723 | like instructions. | |
2724 | ||
2725 | print vtbl on/off: Prettyprint C++ virtual function tables. Default is OFF. | |
2726 | ||
2727 | ||
2728 | * Support for Epoch Environment. | |
2729 | ||
2730 | The epoch environment is a version of Emacs v18 with windowing. One | |
2731 | new command, ``inspect'', is identical to ``print'', except that if you | |
2732 | are running in the epoch environment, the value is printed in its own | |
2733 | window. | |
2734 | ||
2735 | ||
2736 | * Support for Shared Libraries | |
2737 | ||
2738 | GDB can now debug programs and core files that use SunOS shared libraries. | |
2739 | Symbols from a shared library cannot be referenced | |
2740 | before the shared library has been linked with the program (this | |
2741 | happens after you type ``run'' and before the function main() is entered). | |
2742 | At any time after this linking (including when examining core files | |
2743 | from dynamically linked programs), gdb reads the symbols from each | |
2744 | shared library when you type the ``sharedlibrary'' command. | |
2745 | It can be abbreviated ``share''. | |
2746 | ||
2747 | sharedlibrary REGEXP: Load shared object library symbols for files | |
2748 | matching a unix regular expression. No argument | |
2749 | indicates to load symbols for all shared libraries. | |
2750 | ||
2751 | info sharedlibrary: Status of loaded shared libraries. | |
2752 | ||
2753 | ||
2754 | * Watchpoints | |
2755 | ||
2756 | A watchpoint stops execution of a program whenever the value of an | |
2757 | expression changes. Checking for this slows down execution | |
2758 | tremendously whenever you are in the scope of the expression, but is | |
2759 | quite useful for catching tough ``bit-spreader'' or pointer misuse | |
2760 | problems. Some machines such as the 386 have hardware for doing this | |
2761 | more quickly, and future versions of gdb will use this hardware. | |
2762 | ||
2763 | watch EXP: Set a watchpoint (breakpoint) for an expression. | |
2764 | ||
2765 | info watchpoints: Information about your watchpoints. | |
2766 | ||
2767 | delete N: Deletes watchpoint number N (same as breakpoints). | |
2768 | disable N: Temporarily turns off watchpoint number N (same as breakpoints). | |
2769 | enable N: Re-enables watchpoint number N (same as breakpoints). | |
2770 | ||
2771 | ||
2772 | * C++ multiple inheritance | |
2773 | ||
2774 | When used with a GCC version 2 compiler, GDB supports multiple inheritance | |
2775 | for C++ programs. | |
2776 | ||
2777 | * C++ exception handling | |
2778 | ||
2779 | Gdb now supports limited C++ exception handling. Besides the existing | |
2780 | ability to breakpoint on an exception handler, gdb can breakpoint on | |
2781 | the raising of an exception (before the stack is peeled back to the | |
2782 | handler's context). | |
2783 | ||
2784 | catch FOO: If there is a FOO exception handler in the dynamic scope, | |
2785 | set a breakpoint to catch exceptions which may be raised there. | |
2786 | Multiple exceptions (``catch foo bar baz'') may be caught. | |
2787 | ||
2788 | info catch: Lists all exceptions which may be caught in the | |
2789 | current stack frame. | |
2790 | ||
2791 | ||
2792 | * Minor command changes | |
2793 | ||
2794 | The command ``call func (arg, arg, ...)'' now acts like the print | |
2795 | command, except it does not print or save a value if the function's result | |
2796 | is void. This is similar to dbx usage. | |
2797 | ||
2798 | The ``up'' and ``down'' commands now always print the frame they end up | |
2799 | at; ``up-silently'' and `down-silently'' can be used in scripts to change | |
2800 | frames without printing. | |
2801 | ||
2802 | * New directory command | |
2803 | ||
2804 | 'dir' now adds directories to the FRONT of the source search path. | |
2805 | The path starts off empty. Source files that contain debug information | |
2806 | about the directory in which they were compiled can be found even | |
2807 | with an empty path; Sun CC and GCC include this information. If GDB can't | |
2808 | find your source file in the current directory, type "dir .". | |
2809 | ||
2810 | * Configuring GDB for compilation | |
2811 | ||
2812 | For normal use, type ``./configure host''. See README or gdb.texinfo | |
2813 | for more details. | |
2814 | ||
2815 | GDB now handles cross debugging. If you are remotely debugging between | |
2816 | two different machines, type ``./configure host -target=targ''. | |
2817 | Host is the machine where GDB will run; targ is the machine | |
2818 | where the program that you are debugging will run. |