Commit | Line | Data |
---|---|---|
c906108c | 1 | If you find inaccuracies in this list, please send mail to |
2a00c9ce AC |
2 | gdb-patches@sourceware.cygnus.com. If you would like to work on any |
3 | of these, you should consider sending mail to the same address, to | |
4 | find out whether anyone else is working on it. | |
c906108c | 5 | |
138f88c0 | 6 | |
552054a8 AC |
7 | GDB 5.1 - Fixes |
8 | =============== | |
138f88c0 | 9 | |
bc9e5bbf | 10 | Below is a list of problems identified during the GDB 5.0 release |
552054a8 | 11 | cycle. People hope to have these problems fixed in 5.1. |
4fd99b5a AC |
12 | |
13 | -- | |
14 | ||
967110cb L |
15 | Hardware watchpint problems on x86 OSes, including Linux: |
16 | ||
17 | 1. Delete/disable hardware watchpoints should free hardware debug | |
18 | registers. | |
19 | 2. Watch for different values on a viariable with one hardware debug | |
20 | register. | |
21 | ||
22 | According to Eli Zaretskii <eliz@delorie.com>: | |
23 | ||
24 | These are not GDB/ia32 issues per se: the above features are all | |
25 | implemented in the DJGPP port of GDB and work in v5.0. Every | |
26 | x86-based target should be able to lift the relevant parts of | |
27 | go32-nat.c and use them almost verbatim. You get debug register | |
28 | sharing through reference counts, and the ability to watch large | |
29 | regions (up to 16 bytes) using multiple registers. (The required | |
30 | infrastructure in high-level GDB application code, mostly in | |
31 | breakpoint.c, is also working since v5.0.) | |
32 | ||
33 | -- | |
34 | ||
bc9e5bbf | 35 | RFD: infrun.c: No bpstat_stop_status call after proceed over break? |
138f88c0 AC |
36 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00665.html |
37 | ||
bc9e5bbf AC |
38 | GDB misses watchpoint triggers after proceeding over a breakpoint on |
39 | x86 targets. | |
40 | ||
138f88c0 AC |
41 | -- |
42 | ||
67edb2c6 AC |
43 | x86 linux GDB and SIGALRM (???) |
44 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00803.html | |
45 | ||
37d4dc74 MK |
46 | This problem has been fixed, but a regression test still needs to be |
47 | added to the testsuite: | |
48 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00309.html | |
67edb2c6 | 49 | |
bc9e5bbf | 50 | Mark |
67edb2c6 AC |
51 | |
52 | -- | |
53 | ||
b2f4b24d AC |
54 | Can't build IRIX -> arm GDB. |
55 | http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00356.html | |
56 | ||
57 | David Whedon writes: | |
58 | > Now I'm building for an embedded arm target. If there is a way of turning | |
59 | > remote-rdi off, I couldn't find it. It looks like it gets built by default | |
60 | > in gdb/configure.tgt(line 58) Anyway, the build dies in | |
61 | > gdb/rdi-share/unixcomm.c. SERPORT1 et. al. never get defined because we | |
62 | > aren't one of the architectures supported. | |
63 | ||
6bc37a96 AC |
64 | -- |
65 | ||
66 | Problem with weak functions | |
67 | http://sourceware.cygnus.com/ml/gdb/2000-05/msg00060.html | |
68 | ||
69 | Dan Nicolaescu writes: | |
70 | > It seems that gdb-4.95.1 does not display correctly the function when | |
71 | > stoping in weak functions. | |
72 | > | |
73 | > It stops in a function that is defined as weak, not in the function | |
e26cc349 | 74 | > that is actually run... |
b2f4b24d | 75 | |
26099b4a AC |
76 | -- |
77 | ||
78 | GDB 5.0 doesn't work on Linux/SPARC | |
79 | ||
3fffcb5e AC |
80 | -- |
81 | ||
552054a8 AC |
82 | Thread support. Right now, as soon as a thread finishes and exits, |
83 | you're hosed. This problem is reported once a week or so. | |
3fffcb5e | 84 | |
138f88c0 AC |
85 | -- |
86 | ||
552054a8 AC |
87 | Wow, three bug reports for the same problem in one day! We should |
88 | probably make fixing this a real priority :-). | |
bc9e5bbf | 89 | |
552054a8 AC |
90 | Anyway, thanks for reporting. |
91 | ||
92 | The following patch will fix the problems with setting breakpoints in | |
93 | dynamically loaded objects: | |
94 | ||
95 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00230.html | |
96 | ||
97 | This patch isn't checked in yet (ping Michael/JimB), but I hope this | |
98 | will be in the next GDB release. | |
99 | ||
100 | There should really be a test in the testsuite for this problem, since | |
101 | it keeps coming up :-(. Any volunteers? | |
102 | ||
103 | Mark | |
4afc966c AC |
104 | |
105 | -- | |
106 | ||
552054a8 AC |
107 | Re: GDB 5.0.1? |
108 | http://sources.redhat.com/ml/gdb/2000-07/msg00038.html | |
4afc966c | 109 | |
552054a8 AC |
110 | Is the Solaris 8 x86 problem fixed? When you configure it, configure |
111 | incorrectly determines that I have no curses.h. This causes mucho | |
112 | compilation errors later on. | |
113 | ||
114 | Simply editing the config.h to define CURSES_H fixes the problem, and | |
115 | then the build works fine. | |
116 | ||
117 | The status for this problem: | |
118 | ||
119 | Solaris 8 x86 (PIII-560) | |
120 | gcc 2.95.2 | |
121 | ||
122 | I had the same problem with several of the snapshots shortly before | |
123 | 5.0 became official, and 5.0 has the same problem. | |
124 | ||
125 | I sent some mail in about it long ago, and never saw a reply. | |
126 | ||
127 | I haven't had time to figure it out myself, especially since I get all | |
128 | confused trying to figure out what configure does, I was happy to find | |
129 | the workaround. | |
130 | ||
131 | Mike | |
132 | ||
133 | -- | |
134 | ||
135 | GDB 5.1 - New features | |
136 | ====================== | |
137 | ||
138 | The following new features should be included in 5.1. | |
139 | ||
140 | -- | |
141 | ||
142 | Enable MI by default. Old code can be deleted after 5.1 is out. | |
143 | ||
144 | -- | |
145 | ||
146 | Pascal (Pierre Muller, David Taylor) | |
147 | ||
148 | Pierre Muller has contributed patches for adding Pascal Language | |
149 | support to GDB. | |
150 | ||
151 | 2 pascal language patches inserted in database | |
152 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00521.html | |
153 | ||
154 | Indent -gnu ? | |
155 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00496.html | |
156 | ||
157 | -- | |
158 | ||
159 | Java (Anthony Green, David Taylor) | |
160 | ||
161 | Anthony Green has a number of Java patches that did not make it into | |
162 | the 5.0 release. The first two are in cvs now, but the third needs | |
163 | some fixing up before it can go in. | |
164 | ||
165 | Patch: java tests | |
166 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00512.html | |
167 | ||
168 | Patch: java booleans | |
169 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00515.html | |
170 | ||
171 | Patch: handle N_MAIN stab | |
172 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00527.html | |
173 | ||
174 | -- | |
175 | ||
176 | [Comming...] | |
177 | ||
178 | Modify gdb to work correctly with Pascal. | |
179 | ||
180 | -- | |
181 | ||
182 | Revised UDP support (was: Re: [Fwd: [patch] UDP transport support]) | |
183 | http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00000.html | |
184 | ||
185 | (Broken) support for GDB's remote protocol across UDP is to be | |
186 | included in the follow-on release. | |
187 | ||
188 | It should be noted that UDP can only work when the [Gg] packet fits in | |
189 | a single UDP packet. | |
190 | ||
191 | There is also much debate over the merit of this. | |
192 | ||
193 | -- | |
194 | ||
195 | GDB 5.1 - Cleanups | |
196 | ================== | |
197 | ||
198 | The following code cleanups will hopefully be applied to GDB 5.1. | |
199 | ||
200 | -- | |
201 | ||
dc10500f AC |
202 | Change documentation to GFDL license. |
203 | ||
204 | ``It is time to make an effort to start using the GFDL more | |
205 | thoroughly. Would all GNU maintainers please change the license to | |
206 | the GFDL, for all manuals and other major documentation files? | |
207 | ||
208 | The GFDL and some instructions for using it can be found in | |
209 | http://www.gnu.org/copyleft/'' | |
210 | ||
211 | RMS | |
212 | ||
213 | -- | |
214 | ||
552054a8 AC |
215 | Delete macro TARGET_BYTE_ORDER_SELECTABLE. |
216 | ||
217 | Patches in the database. | |
4afc966c AC |
218 | |
219 | -- | |
220 | ||
78566ebe AC |
221 | Fix copyright notices. |
222 | ||
223 | Turns out that ``1998-2000'' isn't considered valid :-( | |
224 | ||
225 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00467.html | |
226 | ||
1ba607ad AC |
227 | -- |
228 | ||
552054a8 | 229 | Purge PARAMS. |
1ba607ad | 230 | |
552054a8 | 231 | Eliminate all uses of PARAMS in GDB's source code. |
1ba607ad | 232 | |
e2ad119d AC |
233 | -- |
234 | ||
235 | printcmd.c (print_address_numeric): | |
236 | ||
237 | NOTE: This assumes that the significant address information is kept in | |
238 | the least significant bits of ADDR - the upper bits were either zero | |
239 | or sign extended. Should ADDRESS_TO_POINTER() or some | |
240 | ADDRESS_TO_PRINTABLE() be used to do the conversion? | |
241 | ||
552054a8 AC |
242 | -- |
243 | ||
244 | Compiler warnings. | |
245 | ||
246 | Eliminate all warnings for at least one host/target for the flags: | |
247 | -Wimplicit -Wreturn-type -Wcomment -Wtrigraphs -Wformat -Wparentheses | |
248 | -Wpointer-arith -Wuninitialized | |
249 | ||
250 | -- | |
251 | ||
252 | Follow through `make check' with --enable-shared. | |
253 | ||
254 | When the srcware tree is configured with --enable-shared, the `expect' | |
255 | program won't run properly. Jim Wilson found out gdb has a local hack | |
256 | to set LD_LIBRARY_PATH, but, AFAIK, no other project has been hacked | |
257 | similarly. | |
258 | ||
259 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00845.html | |
260 | ||
261 | -- | |
262 | ||
263 | GDB 5.2 - Fixes | |
264 | =============== | |
265 | ||
266 | -- | |
267 | ||
268 | Fix at least one thread bug. | |
269 | ||
270 | -- | |
271 | ||
272 | GDB 5.2 - New features | |
273 | ====================== | |
274 | ||
275 | -- | |
276 | ||
277 | Objective C/C++ Support. Bu hopefully sooner... | |
278 | ||
279 | -- | |
280 | ||
281 | GDB 5.2 - Cleanups | |
282 | ================== | |
283 | ||
284 | The following cleanups have been identified as part of GDB 5.2. | |
285 | ||
286 | -- | |
287 | ||
dafc8383 FN |
288 | Remove old code that does not use ui_out functions and all the related |
289 | "ifdef"s. | |
290 | ||
291 | -- | |
292 | ||
552054a8 AC |
293 | Eliminate more compiler warnings. |
294 | ||
295 | -- | |
296 | ||
297 | Restructure gdb directory tree so that it avoids any 8.3 and 14 | |
298 | filename problems. | |
299 | ||
300 | -- | |
301 | ||
302 | Convert GDB build process to AUTOMAKE. | |
303 | ||
304 | See also sub-directory configure below. | |
305 | ||
306 | The current convention is (kind of) to use $(<header>_h) in all | |
307 | dependency lists. It isn't done in a consistent way. | |
308 | ||
4afc966c AC |
309 | -- |
310 | ||
311 | Code Cleanups: General | |
312 | ====================== | |
313 | ||
314 | The following are more general cleanups and fixes. They are not tied | |
315 | to any specific release. | |
bc9e5bbf AC |
316 | |
317 | -- | |
318 | ||
552054a8 AC |
319 | The BFD directory requires bug-fixed AUTOMAKE et.al. |
320 | ||
321 | AUTOMAKE 1.4 incorrectly set the TEXINPUTS environment variable. It | |
322 | contained the full path to texinfo.tex when it should have only | |
323 | contained the directory. The bug has been fixed in the current | |
324 | AUTOMAKE sources. Automake snapshots can be found in: | |
325 | ftp://sourceware.cygnus.com/pub/gdb/snapshots | |
326 | and ftp://sourceware.cygnus.com/pub/binutils | |
327 | ||
328 | -- | |
329 | ||
330 | Find something better than DEFAULT_BFD_ARCH, DEFAULT_BFD_VEC to | |
331 | determine the default isa/byte-order. | |
332 | ||
333 | -- | |
334 | ||
e26cc349 | 335 | Rely on BFD_BIG_ENDIAN and BFD_LITTLE_ENDIAN instead of host dependent |
552054a8 AC |
336 | BIG_ENDIAN and LITTLE_ENDIAN. |
337 | ||
338 | -- | |
339 | ||
d8038014 AC |
340 | Eliminate more compiler warnings. |
341 | ||
342 | Of course there also needs to be the usual debate over which warnings | |
343 | are valid and how to best go about this. | |
344 | ||
345 | One method: choose a single option; get agreement that it is | |
346 | reasonable; try it out to see if there isn't anything silly about it | |
347 | (-Wunused-parameters is an example of that) then incrementally hack | |
348 | away. | |
349 | ||
350 | The other method is to enable all warnings and eliminate them from one | |
351 | file at a time. | |
352 | ||
353 | -- | |
354 | ||
4afc966c | 355 | Elimination of ``(catch_errors_ftype *) func''. |
bc9e5bbf | 356 | |
4afc966c | 357 | Like make_cleanup_func it isn't portable. |
6ecce94d AC |
358 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00791.html |
359 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00814.html | |
360 | ||
4afc966c AC |
361 | -- |
362 | ||
e255d535 AC |
363 | Nuke #define CONST_PTR. |
364 | ||
365 | -- | |
366 | ||
4afc966c AC |
367 | Nuke USG define. |
368 | ||
369 | -- | |
370 | ||
371 | [PATCH/5] src/intl/Makefile.in:distclean additions | |
372 | http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00363.html | |
373 | ||
374 | Do not forget to merge the patch back into the trunk. | |
375 | ||
376 | -- | |
377 | ||
378 | Rationalize the host-endian code (grep for HOST_BYTE_ORDER). | |
379 | ||
380 | At present defs.h includes <endian.h> (which is linux specific) yet | |
381 | almost nothing depends on it. Suggest "gdb_endian.h" which can also | |
382 | handle <machine/endian.h> and only include that where it is really | |
383 | needed. | |
384 | ||
385 | -- | |
386 | ||
4afc966c AC |
387 | Replace savestring() with something from libiberty. |
388 | ||
389 | An xstrldup()? but that would have different semantics. | |
390 | ||
391 | -- | |
392 | ||
393 | Rationalize use of floatformat_unknown in GDB sources. | |
394 | ||
395 | Instead of defaulting to floatformat_unknown, should hosts/targets | |
396 | specify the value explicitly? | |
397 | ||
398 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00447.html | |
399 | ||
400 | -- | |
401 | ||
402 | Add a ``name'' member to include/floatformat.h:struct floatformat. | |
403 | Print that name in gdbarch.c. | |
404 | ||
405 | -- | |
406 | ||
407 | Sort out the harris mess in include/floatformat.h (it hardwires two | |
408 | different floating point formats). | |
409 | ||
410 | -- | |
411 | ||
412 | See of the GDB local floatformat_do_doublest() and libiberty's | |
413 | floatformat_to_double (which was once GDB's ...) can be merged some | |
414 | how. | |
415 | ||
416 | -- | |
417 | ||
4fcf66da | 418 | Eliminate mmalloc(), mstrsave() et.al. from GDB. |
4afc966c AC |
419 | |
420 | Also eliminate it from defs.h. | |
421 | ||
422 | -- | |
423 | ||
424 | Eliminate PTR. ISO-C allows ``void *''. | |
425 | ||
426 | -- | |
427 | ||
428 | Eliminate abort (). | |
429 | ||
430 | GDB should never abort. GDB should either throw ``error ()'' or | |
431 | ``internal_error ()''. Better still GDB should naturally unwind with | |
432 | an error status. | |
433 | ||
434 | -- | |
435 | ||
552054a8 AC |
436 | Add __LINE__ and __FILE__ to internal_error(). |
437 | ||
438 | -- | |
439 | ||
4afc966c AC |
440 | GDB probably doesn't build on FreeBSD pre 2.2.x |
441 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00378.html | |
442 | ||
443 | Fixes to get FreeBSD working on 2.2.x, 3.x and 4.x caused the code to | |
444 | suffer bit rot. | |
bc9e5bbf AC |
445 | |
446 | -- | |
447 | ||
78566ebe AC |
448 | Deprecate "fg". Apparently ``fg'' is actually continue. |
449 | ||
450 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00417.html | |
451 | ||
452 | -- | |
453 | ||
454 | Deprecate current use of ``floatformat_unknown''. | |
455 | ||
456 | Require all targets to explicitly provide their float format instead | |
457 | of defaulting to floatformat unknown. Doing the latter leads to nasty | |
458 | bugs. | |
459 | ||
460 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00447.html | |
bc9e5bbf AC |
461 | |
462 | -- | |
463 | ||
78566ebe AC |
464 | Rationalize floatformat_to_double() vs floatformat_to_doublest(). |
465 | ||
466 | Looks like GDB migrated floatformat_to_double() to libiberty but then | |
467 | turned around and created a ..._to_doublest() the latter containing | |
468 | several bug fixes. | |
469 | ||
470 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00472.html | |
471 | ||
472 | -- | |
473 | ||
474 | Move floatformat_ia64_ext to libiberty/include floatformat.[ch]. | |
475 | ||
476 | http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00466.html | |
477 | ||
478 | -- | |
479 | ||
b4a20239 AC |
480 | The ``maintenance deprecate set endian big'' command doesn't notice |
481 | that it is deprecating ``set endian'' and not ``set endian big'' (big | |
482 | is implemented using an enum). Is anyone going to notice this? | |
483 | ||
484 | -- | |
485 | ||
486 | When tab expanding something like ``set arch<tab>'' ignore the | |
487 | deprecated ``set archdebug'' and expand to ``set architecture''. | |
488 | ||
78566ebe AC |
489 | -- |
490 | ||
53904c9e AC |
491 | Eliminate ``arm_register_names[j] = (char *) regnames[j]'' and the |
492 | like from arm-tdep.c. | |
493 | ||
494 | -- | |
495 | ||
496 | Fix uses of ->function.cfunc = set_function(). | |
497 | ||
498 | The command.c code calls sfunc() when a set command. Rather than | |
499 | change it suggest fixing the callback function so that it is more | |
500 | useful. See: | |
501 | ||
502 | http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00062.html | |
503 | ||
504 | See also ``Fix implementation of ``target xxx''.'' below. | |
505 | ||
bf64bfd6 AC |
506 | -- |
507 | ||
508 | IRIX 3.x support is probably broken. | |
509 | ||
5d35f0ac AC |
510 | -- |
511 | ||
512 | Delete sim/SIM_HAVE_BREAKPOINTS and gdb/SIM_HAS_BREAKPOINTS. | |
513 | http://sourceware.cygnus.com/ml/gdb-patches/2000-07/msg00042.html | |
514 | ||
515 | Apart from the d30v, are there any sim/common simulators that make use | |
516 | of this? | |
517 | ||
e26cc349 | 518 | A brief summary of what happened is that sim/common/sim-break.c was |
5d35f0ac AC |
519 | created as a good idea. It turned out a better idea was to use |
520 | SIM_SIGBREAK and have GDB pass back sim_resume (..., SIGBREAK). | |
521 | ||
d471ea57 AC |
522 | -- |
523 | ||
524 | Move remote_remove_hw_breakpoint, remote_insert_hw_breakpoint, | |
525 | remote_remove_watchpoint, remote_insert_watchpoint into target vector. | |
526 | ||
896f1867 AC |
527 | -- |
528 | ||
529 | Eliminate ``extern'' from C files. | |
530 | ||
531 | -- | |
532 | ||
533 | Replace ``STREQ()'' et.al. with ``strcmp() == 0'' et.al. | |
534 | ||
535 | Extreme care is recommeded - perhaps only modify tests that are | |
536 | exercised by the testsuite (as determined using some type of code | |
537 | coverage analysis). | |
538 | ||
53904c9e | 539 | -- |
78566ebe | 540 | |
4afc966c AC |
541 | New Features and Fixes |
542 | ====================== | |
bc9e5bbf | 543 | |
4afc966c AC |
544 | These are harder than cleanups but easier than work involving |
545 | fundamental architectural change. | |
bc9e5bbf AC |
546 | |
547 | -- | |
548 | ||
4afc966c AC |
549 | Add built-by, build-date, tm, xm, nm and anything else into gdb binary |
550 | so that you can see how the GDB was created. | |
bc9e5bbf | 551 | |
bc9e5bbf AC |
552 | -- |
553 | ||
4afc966c AC |
554 | Add an "info bfd" command that displays supported object formats, |
555 | similarly to objdump -i. | |
5683e87a | 556 | |
4afc966c | 557 | Is there a command already? |
5683e87a AC |
558 | |
559 | -- | |
560 | ||
4afc966c | 561 | Fix ``I'm sorry, Dave, I can't do that.'' from symfile.c. |
bc9e5bbf | 562 | |
4afc966c | 563 | This requires internationalization. |
bc9e5bbf | 564 | |
4afc966c | 565 | -- |
bc9e5bbf | 566 | |
2e4e9e68 AC |
567 | Add support for: |
568 | ||
569 | (gdb) p fwprintf(stdout,L"%S\n", f) | |
570 | No symbol "L" in current context. | |
571 | ||
572 | -- | |
573 | ||
4afc966c | 574 | Cleanup configury support for optional sub-directories. |
7ae38352 | 575 | |
4afc966c AC |
576 | Check how GCC handles multiple front ends for an example of how things |
577 | could work. A tentative first step is to rationalize things so that | |
578 | all sub directories are handled in a fashion similar to gdb/mi. | |
579 | ||
580 | See also automake above. | |
7ae38352 AC |
581 | |
582 | -- | |
583 | ||
4afc966c AC |
584 | Add a transcript mechanism to GDB. |
585 | ||
586 | Such a mechanism might log all gdb input and output to a file in a | |
587 | form that would allow it to be replayed. It could involve ``gdb | |
588 | --transcript=FILE'' or it could involve ``(gdb) transcript file''. | |
67edb2c6 AC |
589 | |
590 | -- | |
591 | ||
4afc966c | 592 | Can the xdep files be replaced by autoconf? |
bc9e5bbf | 593 | |
4afc966c | 594 | -- |
bc9e5bbf | 595 | |
4afc966c | 596 | Document trace machinery |
bc9e5bbf | 597 | |
4afc966c AC |
598 | -- |
599 | ||
78566ebe AC |
600 | Document ui-out and ui-file. |
601 | ||
602 | http://sourceware.cygnus.com/ml/gdb/2000-04/msg00121.html | |
603 | ||
604 | -- | |
605 | ||
606 | Update texinfo.tex to latest? | |
607 | ||
78566ebe AC |
608 | -- |
609 | ||
610 | Incorporate agentexpr.texi into gdb.texinfo | |
611 | ||
612 | agentexpr.texi mostly describes the details of the byte code used for | |
613 | tracepoints, not the internals of the support for this in GDB. So it | |
614 | looks like gdb.texinfo is a better place for this information. | |
615 | ||
616 | http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00566.html | |
617 | ||
618 | -- | |
619 | ||
4afc966c | 620 | Document overlay machinery. |
bc9e5bbf | 621 | |
7ae38352 AC |
622 | -- |
623 | ||
4afc966c | 624 | ``(gdb) catch signal SIGNAL'' |
7ae38352 | 625 | |
e26cc349 | 626 | Overlaps with ``handle SIGNAL'' but the implied behavior is different. |
4afc966c AC |
627 | You can attach commands to a catch but not a handle. A handle has a |
628 | limited number of hardwired actions. | |
7ae38352 AC |
629 | |
630 | -- | |
631 | ||
4afc966c | 632 | Get the TUI working on all platforms. |
7ae38352 | 633 | |
bc9e5bbf AC |
634 | -- |
635 | ||
4afc966c AC |
636 | Add support for ``gdb --- PROGRAM ARGS ...''. |
637 | Add support for ``gdb -cmd=...'' | |
9debab2f | 638 | |
4afc966c AC |
639 | Along with many variations. Check: |
640 | ||
641 | ????? for a full discussion. | |
642 | ||
643 | for a discussion. | |
9debab2f AC |
644 | |
645 | -- | |
646 | ||
4afc966c | 647 | Implement ``(gdb) !ls''. |
e55e8cee | 648 | |
4afc966c AC |
649 | Which is very different from ``(gdb) ! ls''. Implementing the latter |
650 | is trivial. | |
651 | ||
652 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00034.html | |
e55e8cee AC |
653 | |
654 | -- | |
655 | ||
b4a20239 AC |
656 | Change the (char *list[]) to (const char (*)[]) so that dynamic lists can |
657 | be passed. | |
658 | ||
659 | -- | |
660 | ||
661 | When tab expanding something like ``set arch<tab>'' ignore the | |
662 | deprecated ``set archdebug'' and expand to ``set architecture''. | |
663 | ||
664 | -- | |
665 | ||
4afc966c AC |
666 | Replace the code that uses the host FPU with an emulator of the target |
667 | FPU. | |
7ae38352 | 668 | |
4930751a C |
669 | -- |
670 | ||
671 | The "ocd reset" command needs to flush the dcache, which requires breaking | |
672 | the abstraction layer between the target independent and target code. One | |
673 | way to address this is provide a generic "reset" command and target vector. | |
674 | ||
675 | http://sources.redhat.com/ml/gdb-patches/2000-10/msg00011.html | |
676 | ||
4afc966c AC |
677 | -- |
678 | ||
679 | Thread Support | |
680 | ============== | |
7ae38352 AC |
681 | |
682 | -- | |
683 | ||
4afc966c AC |
684 | Generic: lin-thread cannot handle thread exit (Mark Kettenis, Michael |
685 | Snyder) http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00525.html | |
7ae38352 | 686 | |
4afc966c AC |
687 | The thread_db assisted debugging code doesn't handle exiting threads |
688 | properly, at least in combination with glibc 2.1.3 (the framework is | |
689 | there, just not the actual code). There are at least two problems | |
690 | that prevent this from working. | |
691 | ||
692 | As an additional reference point, the pre thread_db code did not work | |
693 | either. | |
7ae38352 AC |
694 | |
695 | -- | |
696 | ||
4afc966c AC |
697 | GNU/Linux/x86 and random thread signals (and Solaris/SPARC but not |
698 | Solaris/x86). | |
699 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00336.html | |
7ae38352 | 700 | |
4afc966c AC |
701 | Christopher Blizzard writes: |
702 | ||
703 | So, I've done some more digging into this and it looks like Jim | |
704 | Kingdon has reported this problem in the past: | |
705 | ||
706 | http://sourceware.cygnus.com/ml/bug-gdb/1999-10/msg00058.html | |
707 | ||
708 | I can reproduce this problem both with and without Tom's patch. Has | |
709 | anyone seen this before? Maybe have a solution for it hanging around? | |
710 | :) | |
711 | ||
712 | There's a test case for this documented at: | |
713 | ||
714 | when debugging threaded applications you get extra SIGTRAPs | |
715 | http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=9565 | |
716 | ||
717 | [There should be a GDB testcase - cagney] | |
7ae38352 AC |
718 | |
719 | -- | |
720 | ||
4afc966c AC |
721 | GDB5 TOT on unixware 7 |
722 | http://sourceware.cygnus.com/ml/gdb/2000-04/msg00119.html | |
7ae38352 | 723 | |
4afc966c AC |
724 | Robert Lipe writes: |
725 | > I just spun the top of tree of the GDB5 branch on UnixWare 7. As a | |
726 | > practical matter, the current thread support is somewhat more annoying | |
727 | > than when GDB was thread-unaware. | |
7ae38352 AC |
728 | |
729 | -- | |
730 | ||
4afc966c | 731 | Migrate qfThreadInfo packet -> qThreadInfo. (Andrew Cagney) |
7ae38352 | 732 | |
4afc966c AC |
733 | Add support for packet enable/disable commands with these thread |
734 | packets. General cleanup. | |
735 | ||
736 | [PATCH] Document the ThreadInfo remote protocol queries | |
737 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00832.html | |
738 | ||
739 | [PATCH] "info threads" queries for remote.c | |
740 | http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00831.html | |
7ae38352 AC |
741 | |
742 | -- | |
743 | ||
4afc966c AC |
744 | Language Support |
745 | ================ | |
7ae38352 | 746 | |
4afc966c | 747 | New languages come onto the scene all the time. |
7ae38352 AC |
748 | |
749 | -- | |
750 | ||
4afc966c AC |
751 | Re: Various C++ things |
752 | ||
26099b4a AC |
753 | value_headof/value_from_vtable_info are worthless, and should be |
754 | removed. The one place in printcmd.c that uses it should use the RTTI | |
755 | functions. | |
4afc966c | 756 | |
26099b4a AC |
757 | RTTI for g++ should be using the typeinfo functions rather than the |
758 | vtables. The typeinfo functions are always at offset 4 from the | |
759 | beginning of the vtable, and are always right. The vtables will have | |
760 | weird names like E::VB sometimes. The typeinfo function will always | |
761 | be "E type_info function", or somesuch. | |
4afc966c | 762 | |
26099b4a AC |
763 | value_virtual_fn_field needs to be fixed so there are no failures for |
764 | virtual functions for C++ using g++. | |
4afc966c | 765 | |
26099b4a AC |
766 | Testsuite cases are the major priority right now for C++ support, |
767 | since i have to make a lot of changes that could potentially break | |
768 | each other. | |
7ae38352 AC |
769 | |
770 | -- | |
771 | ||
4afc966c | 772 | Add support for Modula3 |
7ae38352 | 773 | |
4afc966c | 774 | Get DEC/Compaq to contribute their Modula-3 support. |
7ae38352 AC |
775 | |
776 | -- | |
777 | ||
4afc966c AC |
778 | Remote Protocol Support |
779 | ======================= | |
7ae38352 AC |
780 | |
781 | -- | |
782 | ||
7ae38352 AC |
783 | Remote protocol doco feedback. |
784 | ||
785 | Too much feedback to mention needs to be merged in (901660). Search | |
786 | for the word ``remote''. | |
787 | ||
4afc966c AC |
788 | |
789 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00023.html | |
790 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00056.html | |
791 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00382.html | |
792 | ||
7ae38352 AC |
793 | -- |
794 | ||
4afc966c | 795 | GDB doesn't recover gracefully from remote protocol errors. |
7ae38352 | 796 | |
4afc966c AC |
797 | GDB wasn't checking for NAKs from the remote target. Instead a NAK is |
798 | ignored and a timeout is required before GDB retries. A pre-cursor to | |
799 | fixing this this is making GDB's remote protocol packet more robust. | |
800 | ||
801 | While downloading to a remote protocol target, gdb ignores packet | |
d471ea57 | 802 | errors in so far as it will continue to download with chunk N+1 even |
4afc966c AC |
803 | if chunk N was not correctly sent. This causes gdb.base/remote.exp to |
804 | take a painfully long time to run. As a PS that test needs to be | |
805 | fixed so that it builds on 16 bit machines. | |
7ae38352 AC |
806 | |
807 | -- | |
808 | ||
4afc966c | 809 | Add the cycle step command. |
7ae38352 | 810 | |
4afc966c | 811 | http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00237.html |
7ae38352 | 812 | |
26099b4a AC |
813 | -- |
814 | ||
815 | Resolve how to scale things to support very large packets. | |
816 | ||
817 | -- | |
818 | ||
819 | Resolve how to handle a target that changes things like its endianess | |
820 | on the fly - should it be returned in the ``T'' packet? | |
821 | ||
822 | Underlying problem is that the register file is target endian. If the | |
823 | target endianess changes gdb doesn't know. | |
824 | ||
2e4e9e68 AC |
825 | -- |
826 | ||
2e4e9e68 AC |
827 | Rename read_register{,_pid}() to read_unsigned_register{,_pid}(). |
828 | ||
7ae38352 AC |
829 | -- |
830 | ||
4afc966c AC |
831 | Symbol Support |
832 | ============== | |
7ae38352 | 833 | |
4afc966c AC |
834 | If / when GDB starts to support the debugging of multi-processor |
835 | (rather than multi-thread) applications the symtab code will need to | |
e26cc349 | 836 | be updated a little so that several independent symbol tables are |
4afc966c AC |
837 | active at a given time. |
838 | ||
839 | The other interesting change is a clarification of the exact meaning | |
840 | of CORE_ADDR and that has had consequences for a few targets (that | |
841 | were abusing that data type). | |
7ae38352 | 842 | |
d8038014 AC |
843 | -- |
844 | ||
4afc966c | 845 | Investiagate ways of reducing memory. |
d8038014 AC |
846 | |
847 | -- | |
848 | ||
4afc966c | 849 | Investigate ways of improving load time. |
d8038014 | 850 | |
4afc966c AC |
851 | -- |
852 | ||
853 | Get the d10v to use POINTER_TO_ADDRESS and ADDRESS_TO_POINTER. | |
854 | ||
855 | Consequence of recent symtab clarification. No marks for figuring out | |
856 | who maintains the d10v. | |
d8038014 | 857 | |
0aaf65d7 AC |
858 | -- |
859 | ||
4afc966c AC |
860 | Get the MIPS to correctly sign extend all address <-> pointer |
861 | conversions. | |
0aaf65d7 | 862 | |
4afc966c AC |
863 | Consequence of recent symtab clarification. No marks for figuring out |
864 | who maintains the MIPS. | |
0aaf65d7 | 865 | |
5d35f0ac AC |
866 | -- |
867 | ||
868 | GDB truncates 64 bit enums. | |
869 | ||
870 | http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00290.html | |
871 | ||
26099b4a AC |
872 | -- |
873 | ||
874 | Testsuite Support | |
875 | ================= | |
876 | ||
877 | There are never to many testcases. | |
878 | ||
879 | -- | |
880 | ||
881 | Better thread testsuite. | |
882 | ||
883 | -- | |
884 | ||
885 | Better C++ testsuite. | |
886 | ||
887 | -- | |
888 | ||
889 | Look at adding a GDB specific testsuite directory so that white box | |
890 | tests of key internals can be added (eg ui_file). | |
891 | ||
892 | -- | |
893 | ||
894 | Separate out tests that involve the floating point (FP). | |
895 | ||
896 | (Something for people brining up new targets). FP and non-fp tests | |
897 | are combined. I think there should be set of basic tests that | |
898 | exercise pure integer support and then a more expanded set that | |
899 | exercise FP and FP/integer interactions. | |
900 | ||
901 | As an example, the MIPS, for n32 as problems with passing FP's and | |
902 | structs. Since most inferior call tests include FP it is difficult to | |
903 | determine of the integer tests are ok. | |
904 | ||
7ae38352 AC |
905 | -- |
906 | ||
4afc966c AC |
907 | Architectural Changes: General |
908 | ============================== | |
7ae38352 AC |
909 | |
910 | These are harder than simple cleanups / fixes and, consequently | |
911 | involve more work. Typically an Architectural Change will be broken | |
912 | down into a more digestible set of cleanups and fixes. | |
913 | ||
914 | -- | |
915 | ||
4afc966c AC |
916 | Cleanup software single step. |
917 | ||
918 | At present many targets implement software single step by directly | |
919 | blatting memory (see rs6000-tdep.c). Those targets should register | |
920 | the applicable breakpoints using the breakpoint framework. Perhaphs a | |
921 | new internal breakpoint class ``step'' is needed. | |
922 | ||
923 | -- | |
924 | ||
7ae38352 AC |
925 | Replace READ_FP() with FRAME_HANDLE(). |
926 | ||
927 | READ_FP() is a hangover from the days of the vax when the ABI really | |
928 | did have a frame pointer register. Modern architectures typically | |
929 | construct a virtual frame-handle from the stack pointer and various | |
930 | other bits of string. | |
931 | ||
e26cc349 | 932 | Unfortunately GDB still treats this synthetic FP register as though it |
7ae38352 AC |
933 | is real. That in turn really confuses users (arm and ``print $fp'' VS |
934 | ``info registers fp''). The synthetic FP should be separated out of | |
935 | the true register set presented to the user. | |
936 | ||
937 | -- | |
938 | ||
2a00c9ce AC |
939 | Register Cache Cleanup (below from Andrew Cagney) |
940 | ||
941 | I would depict the current register architecture as something like: | |
942 | ||
943 | High GDB --> Low GDB | |
944 | | | | |
945 | \|/ \|/ | |
946 | --- REG NR ----- | |
947 | | | |
948 | register + REGISTER_BYTE(reg_nr) | |
949 | | | |
950 | \|/ | |
951 | ------------------------- | |
952 | | extern register[] | | |
953 | ------------------------- | |
954 | ||
955 | where neither the high (valops.c et.al.) or low gdb (*-tdep.c) are | |
956 | really clear on what mechanisms they should be using to manipulate that | |
957 | buffer. Further, much code assumes, dangerously, that registers are | |
958 | contigious. Having got mips-tdep.c to support multiple ABIs, believe | |
959 | me, that is a bad assumption. Finally, that register cache layout is | |
960 | determined by the current remote/local target and _not_ the less | |
961 | specific target ISA. In fact, in many cases it is determined by the | |
962 | somewhat arbitrary layout of the [gG] packets! | |
963 | ||
964 | ||
965 | How I would like the register file to work is more like: | |
966 | ||
967 | ||
968 | High GDB | |
969 | | | |
970 | \|/ | |
971 | pseudo reg-nr | |
972 | | | |
973 | map pseudo <-> | |
974 | random cache | |
975 | bytes | |
976 | | | |
977 | \|/ | |
978 | ------------ | |
979 | | register | | |
980 | | cache | | |
981 | ------------ | |
982 | /|\ | |
983 | | | |
984 | map random cache | |
985 | bytes to target | |
e26cc349 | 986 | dependent i-face |
2a00c9ce AC |
987 | /|\ |
988 | | | |
e26cc349 | 989 | target dependent |
2a00c9ce AC |
990 | such as [gG] packet |
991 | or ptrace buffer | |
992 | ||
993 | The main objectives being: | |
994 | ||
995 | o a clear separation between the low | |
996 | level target and the high level GDB | |
997 | ||
998 | o a mechanism that solves the general | |
999 | problem of register aliases, overlaps | |
1000 | etc instead of treating them as optional | |
1001 | extras that can be wedged in as an after | |
1002 | thought (that is a reasonable description | |
1003 | of the current code). | |
1004 | ||
1005 | Identify then solve the hard case and the | |
1006 | rest just falls out. GDB solved the easy | |
1007 | case and then tried to ignore the real | |
1008 | world :-) | |
1009 | ||
1010 | o a removal of the assumption that the | |
1011 | mapping between the register cache | |
1012 | and virtual registers is largely static. | |
1013 | If you flip the USR/SSR stack register | |
1014 | select bit in the status-register then | |
1015 | the corresponding stack registers should | |
1016 | reflect the change. | |
1017 | ||
1018 | o a mechanism that clearly separates the | |
1019 | gdb internal register cache from any | |
e26cc349 | 1020 | target (not architecture) dependent |
2a00c9ce AC |
1021 | specifics such as [gG] packets. |
1022 | ||
1023 | Of course, like anything, it sounds good in theory. In reality, it | |
1024 | would have to contend with many<->many relationships at both the | |
1025 | virt<->cache and cache<->target level. For instance: | |
1026 | ||
1027 | virt<->cache | |
1028 | Modifying an mmx register may involve | |
1029 | scattering values across both FP and | |
1030 | mmpx specific parts of a buffer | |
1031 | ||
1032 | cache<->target | |
1033 | When writing back a SP it may need to | |
1034 | both be written to both SP and USP. | |
1035 | ||
1036 | ||
1037 | Hmm, | |
1038 | ||
1039 | Rather than let this like the last time it was discussed, just slip, I'm | |
1040 | first going to add this e-mail (+ references) to TODO. I'd then like to | |
1041 | sketch out a broad strategy I think could get us there. | |
1042 | ||
1043 | ||
1044 | First thing I'd suggest is separating out the ``extern registers[]'' | |
1045 | code so that we can at least identify what is using it. At present | |
1046 | things are scattered across many files. That way we can at least | |
1047 | pretend that there is a cache instead of a global array :-) | |
1048 | ||
1049 | I'd then suggest someone putting up a proposal for the pseudo-reg / | |
1050 | high-level side interface so that code can be adopted to it. For old | |
1051 | code, initially a blanket rename of write_register_bytes() to | |
1052 | deprecated_write_register_bytes() would help. | |
1053 | ||
1054 | Following that would, finaly be the corresponding changes to the target. | |
bc9e5bbf AC |
1055 | |
1056 | -- | |
1057 | ||
67edb2c6 AC |
1058 | Check that GDB can handle all BFD architectures (Andrew Cagney) |
1059 | ||
1060 | There should be a test that checks that BFD/GDB are in sync with | |
1061 | regard to architecture changes. Something like a test that first | |
1062 | queries GDB for all supported architectures and then feeds each back | |
1063 | to GDB.. Anyone interested in learning how to write tests? :-) | |
1064 | ||
1065 | -- | |
1066 | ||
4afc966c AC |
1067 | Architectural Change: Multi-arch et al. |
1068 | ======================================= | |
2a00c9ce | 1069 | |
4afc966c AC |
1070 | The long term objective is to remove all assumptions that there is a |
1071 | single target with a single address space with a single instruction | |
1072 | set architecture and single application binary interface. | |
2a00c9ce | 1073 | |
4afc966c AC |
1074 | This is an ongoing effort. The first milestone is to enable |
1075 | ``multi-arch'' where by all architectural decisions are made at | |
1076 | runtime. | |
7ae38352 | 1077 | |
4afc966c AC |
1078 | It should be noted that ``gdbarch'' is really ``gdbabi'' and |
1079 | ``gdbisa''. Once things are multi-arched breaking that down correctly | |
1080 | will become much easier. | |
7ae38352 AC |
1081 | |
1082 | -- | |
1083 | ||
4afc966c | 1084 | GDBARCH cleanup (Andrew Cagney) |
7ae38352 | 1085 | |
4afc966c AC |
1086 | The non-generated parts of gdbarch.{sh,h,c} should be separated out |
1087 | into arch-utils.[hc]. | |
1088 | ||
1089 | Document that gdbarch_init_ftype could easily fail because it didn't | |
1090 | identify an architecture. | |
ed952ac5 AC |
1091 | |
1092 | -- | |
1093 | ||
4afc966c | 1094 | Fix BELIEVE_PPC_PROMOTION. Change it to BELIEVE_PPC_PROMOTION_P? |
ed952ac5 | 1095 | |
4afc966c AC |
1096 | At present there is still #ifdef BELIEVE_PPC_PROMOTION code in the |
1097 | symtab file. | |
ed952ac5 | 1098 | |
4afc966c AC |
1099 | -- |
1100 | ||
8e6a3c35 AC |
1101 | Fix target_signal_from_host() etc. |
1102 | ||
1103 | The name is wrong for starters. ``target_signal'' should probably be | |
1104 | ``gdb_signal''. ``from_host'' should be ``from_target_signal''. | |
e26cc349 | 1105 | After that it needs to be multi-arched and made independent of any |
8e6a3c35 AC |
1106 | host signal numbering. |
1107 | ||
1108 | -- | |
1109 | ||
4afc966c AC |
1110 | Update ALPHA so that it uses ``struct frame_extra_info'' instead of |
1111 | EXTRA_FRAME_INFO. | |
1112 | ||
1113 | This is a barrier to replacing mips_extra_func_info with something | |
1114 | that works with multi-arch. | |
7ae38352 AC |
1115 | |
1116 | -- | |
1117 | ||
4afc966c AC |
1118 | Multi-arch mips_extra_func_info. |
1119 | ||
1120 | This first needs the alpha to be updated so that it uses ``struct | |
1121 | frame_extra_info''. | |
7ae38352 AC |
1122 | |
1123 | -- | |
1124 | ||
4afc966c | 1125 | Rationalize TARGET_SINGLE_FORMAT and TARGET_SINGLE_BIT et al. |
7ae38352 | 1126 | |
4afc966c | 1127 | Surely one of them is redundant. |
7ae38352 AC |
1128 | |
1129 | -- | |
1130 | ||
4afc966c | 1131 | Convert ALL architectures to MULTI-ARCH. |
7ae38352 AC |
1132 | |
1133 | -- | |
1134 | ||
1135 | Select the initial multi-arch ISA / ABI based on --target or similar. | |
1136 | ||
1137 | At present the default is based on what ever is first in the BFD | |
1138 | archures table. It should be determined based on the ``--target=...'' | |
1139 | name. | |
1140 | ||
1141 | -- | |
1142 | ||
bf64bfd6 AC |
1143 | Make MIPS pure multi-arch. |
1144 | ||
1145 | It is only at the multi-arch enabled stage. | |
1146 | ||
1147 | -- | |
1148 | ||
7ae38352 AC |
1149 | Truly multi-arch. |
1150 | ||
1151 | Enable the code to recognize --enable-targets=.... like BINUTILS does. | |
1152 | ||
4afc966c AC |
1153 | Can the tm.h and nm.h files be eliminated by multi-arch. |
1154 | ||
7ae38352 AC |
1155 | -- |
1156 | ||
4afc966c AC |
1157 | Architectural Change: MI, LIBGDB and scripting languages |
1158 | ======================================================== | |
7ae38352 | 1159 | |
4afc966c AC |
1160 | See also architectural changes related to the event loop. LIBGDB |
1161 | can't be finished until there is a generic event loop being used by | |
1162 | all targets. | |
1163 | ||
1164 | The long term objective is it to be possible to integrate GDB into | |
1165 | scripting languages. | |
7ae38352 AC |
1166 | |
1167 | -- | |
1168 | ||
4afc966c | 1169 | Implement generic ``(gdb) commmand > file'' |
7ae38352 | 1170 | |
4afc966c AC |
1171 | Once everything is going through ui_file it should be come fairly |
1172 | easy. | |
1173 | ||
1174 | http://sourceware.cygnus.com/ml/gdb/2000-04/msg00104.html | |
1175 | ||
1176 | -- | |
1177 | ||
1178 | Replace gdb_stdtarg with gdb_targout (and possibly gdb_targerr). | |
1179 | ||
1180 | gdb_stdtarg is easily confused with gdb_stdarg. | |
1181 | ||
1182 | -- | |
1183 | ||
1184 | Extra ui_file methods - dump. | |
1185 | ||
26099b4a | 1186 | Very useful for whitebox testing. |
4afc966c AC |
1187 | |
1188 | -- | |
1189 | ||
1190 | Eliminate error_begin(). | |
1191 | ||
1192 | With ui_file, there is no need for the statefull error_begin () | |
1193 | function. | |
1194 | ||
1195 | -- | |
1196 | ||
1197 | Send normal output to gdb_stdout. | |
1198 | Send error messages to gdb_stderror. | |
1199 | Send debug and log output log gdb_stdlog. | |
1200 | ||
1201 | GDB still contains many cases where (f)printf or printf_filtered () is | |
1202 | used when it should be sending the messages to gdb_stderror or | |
1203 | gdb_stdlog. The thought of #defining printf to something has crossed | |
1204 | peoples minds ;-) | |
7ae38352 AC |
1205 | |
1206 | -- | |
1207 | ||
1208 | Re-do GDB's output pager. | |
1209 | ||
1210 | GDB's output pager still relies on people correctly using *_filtered | |
1211 | for gdb_stdout and *_unfiltered for gdb_stdlog / gdb_stderr. | |
1212 | Hopefully, with all normal output going to gdb_stdout, the pager can | |
1213 | just look at the ui_file that the output is on and then use that to | |
1214 | decide what to do about paging. Sounds good in theory. | |
1215 | ||
1216 | -- | |
1217 | ||
4afc966c AC |
1218 | Check/cleanup MI documentation. |
1219 | ||
1220 | The list of commands specified in the documentation needs to be | |
1221 | checked against the mi-cmds.c table in a mechanical way (so that they | |
1222 | two can be kept up-to-date). | |
1223 | ||
1224 | -- | |
1225 | ||
1226 | Convert MI into libgdb | |
1227 | ||
1228 | MI provides a text interface into what should be many of the libgdb | |
1229 | functions. The implementation of those functions should be separated | |
1230 | into the MI interface and the functions proper. Those functions being | |
1231 | moved to gdb/lib say. | |
1232 | ||
1233 | -- | |
1234 | ||
1235 | Create libgdb.h | |
1236 | ||
1237 | The first part can already be found in defs.h. | |
1238 | ||
1239 | -- | |
1240 | ||
1241 | MI's input does not use buffering. | |
1242 | ||
1243 | At present the MI interface reads raw characters of from an unbuffered | |
1244 | FD. This is to avoid several nasty buffer/race conditions. That code | |
1245 | should be changed so that it registers its self with the event loop | |
1246 | (on the input FD) and then push commands up to MI as they arrive. | |
1247 | ||
1248 | The serial code already does this. | |
1249 | ||
1250 | -- | |
1251 | ||
e26cc349 | 1252 | Make MI interface accessible from existing CLI. |
4afc966c AC |
1253 | |
1254 | -- | |
1255 | ||
1256 | Add a breakpoint-edit command to MI. | |
1257 | ||
1258 | It would be similar to MI's breakpoint create but would apply to an | |
1259 | existing breakpoint. It saves the need to delete/create breakpoints | |
1260 | when ever they are changed. | |
1261 | ||
1262 | -- | |
1263 | ||
1264 | Add directory path to MI breakpoint. | |
1265 | ||
1266 | That way the GUI's task of finding the file within which the | |
1267 | breakpoint was set is simplified. | |
1268 | ||
1269 | -- | |
1270 | ||
1271 | Add a mechanism to reject certain expression classes to MI | |
7ae38352 AC |
1272 | |
1273 | There are situtations where you don't want GDB's expression | |
1274 | parser/evaluator to perform inferior function calls or variable | |
4afc966c AC |
1275 | assignments. A way of restricting the expression parser so that such |
1276 | operations are not accepted would be very helpful. | |
7ae38352 AC |
1277 | |
1278 | -- | |
1279 | ||
1280 | Remove sideffects from libgdb breakpoint create function. | |
1281 | ||
1282 | The user can use the CLI to create a breakpoint with partial | |
1283 | information - no file (gdb would use the file from the last | |
1284 | breakpoint). | |
1285 | ||
1286 | The libgdb interface currently affects that environment which can lead | |
1287 | to confusion when a user is setting breakpoints via both the MI and | |
1288 | the CLI. | |
1289 | ||
1290 | This is also a good example of how getting the CLI ``right'' will be | |
1291 | hard. | |
1292 | ||
1293 | -- | |
1294 | ||
4afc966c | 1295 | Move gdb_lasterr to ui_out? |
7ae38352 | 1296 | |
4afc966c AC |
1297 | The way GDB throws errors and records them needs a re-think. ui_out |
1298 | handles the correct output well. It doesn't resolve what to do with | |
1299 | output / error-messages when things go wrong. | |
7ae38352 | 1300 | |
97c3646f AC |
1301 | -- |
1302 | ||
1303 | do_setshow_command contains a 1024 byte buffer. | |
1304 | ||
1305 | The function assumes that there will never be any more than 1024 bytes | |
1306 | of enum. It should use mem_file. | |
1307 | ||
1308 | -- | |
1309 | ||
1310 | Should struct cmd_list_element . completer take the command as an | |
1311 | argument? | |
1312 | ||
1313 | -- | |
1314 | ||
1315 | Should the bulk of top.c:line_completion_function() be moved to | |
1316 | command.[hc]? complete_on_cmdlist() and complete_on_enums() could | |
1317 | then be made private. | |
1318 | ||
1319 | -- | |
1320 | ||
1321 | top.c (execute_command): Should a command being valid when the target | |
1322 | is running be made an attribute (predicate) to the command rather than | |
1323 | an explicit set of tests. | |
1324 | ||
1325 | -- | |
1326 | ||
1327 | top.c (execute_command): Should the bulk of this function be moved | |
1328 | into command.[hc] so that top.c doesn't grub around in the command | |
1329 | internals? | |
1330 | ||
4afc966c AC |
1331 | -- |
1332 | ||
1333 | Architectural Change: Async | |
1334 | =========================== | |
1335 | ||
1336 | While GDB uses an event loop when prompting the user for input. That | |
1337 | event loop is not exploited by targets when they allow the target | |
1338 | program to continue. Typically targets still block in (target_wait()) | |
1339 | until the program again halts. | |
1340 | ||
1341 | The closest a target comes to supporting full asynchronous mode are | |
1342 | the remote targets ``async'' and ``extended-async''. | |
7ae38352 AC |
1343 | |
1344 | -- | |
1345 | ||
4afc966c | 1346 | Asynchronous expression evaluator |
7ae38352 | 1347 | |
4afc966c | 1348 | Inferior function calls hang GDB. |
7ae38352 AC |
1349 | |
1350 | -- | |
1351 | ||
1352 | Fix implementation of ``target xxx''. | |
1353 | ||
1354 | At present when the user specifies ``target xxxx'', the CLI maps that | |
1355 | directly onto a target open method. It is then assumed that the | |
1356 | target open method should do all sorts of complicated things as this | |
1357 | is the only chance it has. Check how the various remote targets | |
1358 | duplicate the target operations. Check also how the various targets | |
1359 | behave differently for purely arbitrary reasons. | |
1360 | ||
1361 | What should happen is that ``target xxxx'' should call a generic | |
1362 | ``target'' function and that should then co-ordinate the opening of | |
1363 | ``xxxx''. This becomes especially important when you're trying to | |
1364 | open an asynchronous target that may need to perform background tasks | |
1365 | as part of the ``attach'' phase. | |
1366 | ||
e26cc349 | 1367 | Unfortunately, due to limitations in the old/creaking command.h |
7ae38352 AC |
1368 | interface, that isn't possible. The function being called isn't told |
1369 | of the ``xxx'' or any other context information. | |
1370 | ||
1371 | Consequently a precursor to fixing ``target xxxx'' is to clean up the | |
1372 | CLI code so that it passes to the callback function (attatched to a | |
1373 | command) useful information such as the actual command and a context | |
1374 | for that command. Other changes such as making ``struct command'' | |
1375 | opaque may also help. | |
1376 | ||
53904c9e AC |
1377 | See also: |
1378 | http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00062.html | |
1379 | ||
7ae38352 AC |
1380 | -- |
1381 | ||
4afc966c AC |
1382 | Make "target xxx" command interruptible. |
1383 | ||
1384 | As things become async this becomes possible. A target would start | |
1385 | the connect and then return control to the event loop. A cntrl-c | |
1386 | would notify the target that the operation is to be abandoned and the | |
1387 | target code could respond. | |
7ae38352 AC |
1388 | |
1389 | -- | |
1390 | ||
4afc966c AC |
1391 | Add a "suspend" subcommand of the "continue" command to suspend gdb |
1392 | while continuing execution of the subprocess. Useful when you are | |
1393 | debugging servers and you want to dodge out and initiate a connection | |
1394 | to a server running under gdb. | |
1395 | ||
1396 | [hey async!!] | |
7ae38352 | 1397 | |
2a00c9ce AC |
1398 | -- |
1399 | ||
26099b4a AC |
1400 | TODO FAQ |
1401 | ======== | |
1402 | ||
1403 | Frequently requested but not approved requests. | |
1404 | ||
1405 | -- | |
1406 | ||
1407 | Eliminate unused argument warnings using ATTRIBUTE_UNUSED. | |
1408 | ||
1409 | The benefits on this one are thought to be marginal - GDBs design | |
1410 | means that unused parameters are very common. GCC 3.0 will also | |
1411 | include the option -Wno-unused-parameter which means that ``-Wall | |
1412 | -Wno-unused-parameters -Werror'' can be specified. | |
1413 | ||
1414 | -- | |
1415 | ||
1416 | ||
1417 | ||
2a00c9ce AC |
1418 | Legacy Wish List |
1419 | ================ | |
1420 | ||
1421 | This list is not up to date, and opinions vary about the importance or | |
1422 | even desirability of some of the items. If you do fix something, it | |
1423 | always pays to check the below. | |
1424 | ||
1425 | -- | |
c906108c | 1426 | |
b83266a0 SS |
1427 | @c This does not work (yet if ever). FIXME. |
1428 | @c @item --parse=@var{lang} @dots{} | |
1429 | @c Configure the @value{GDBN} expression parser to parse the listed languages. | |
1430 | @c @samp{all} configures @value{GDBN} for all supported languages. To get a | |
1431 | @c list of all supported languages, omit the argument. Without this | |
1432 | @c option, @value{GDBN} is configured to parse all supported languages. | |
1433 | ||
7ae38352 | 1434 | -- |
c906108c SS |
1435 | |
1436 | START_INFERIOR_TRAPS_EXPECTED need never be defined to 2, since that | |
1437 | is its default value. Clean this up. | |
1438 | ||
7ae38352 AC |
1439 | -- |
1440 | ||
c906108c SS |
1441 | It should be possible to use symbols from shared libraries before we know |
1442 | exactly where the libraries will be loaded. E.g. "b perror" before running | |
1443 | the program. This could maybe be done as an extension of the "breakpoint | |
1444 | re-evaluation" after new symbols are loaded. | |
1445 | ||
7ae38352 AC |
1446 | -- |
1447 | ||
c906108c SS |
1448 | Make single_step() insert and remove breakpoints in one operation. |
1449 | ||
26099b4a AC |
1450 | [If this is talking about having single_step() insert the breakpoints, |
1451 | run the target then pull the breakpoints then it is wrong. The | |
1452 | function has to return as control has to eventually be passed back to | |
1453 | the main event loop.] | |
1454 | ||
7ae38352 AC |
1455 | -- |
1456 | ||
c906108c SS |
1457 | Speed up single stepping by avoiding extraneous ptrace calls. |
1458 | ||
7ae38352 AC |
1459 | -- |
1460 | ||
c906108c SS |
1461 | Speed up single stepping by not inserting and removing breakpoints |
1462 | each time the inferior starts and stops. | |
1463 | ||
1464 | Breakpoints should not be inserted and deleted all the time. Only the | |
1465 | one(s) there should be removed when we have to step over one. Support | |
1466 | breakpoints that don't have to be removed to step over them. | |
1467 | ||
7ae38352 | 1468 | [this has resulted in numerous debates. The issue isn't clear cut] |
c906108c | 1469 | |
7ae38352 | 1470 | -- |
c906108c SS |
1471 | |
1472 | Provide "voodoo" debugging of core files. This creates a zombie | |
1473 | process as a child of the debugger, and loads it up with the data, | |
1474 | stack, and regs of the core file. This allows you to call functions | |
1475 | in the executable, to manipulate the data in the core file. | |
1476 | ||
7ae38352 | 1477 | [you wish] |
c906108c | 1478 | |
7ae38352 | 1479 | -- |
c906108c | 1480 | |
7ae38352 | 1481 | GDB reopens the source file on every line, as you "next" through it. |
c906108c | 1482 | |
7ae38352 | 1483 | [still true? I've a memory of this being fixed] |
c906108c | 1484 | |
7ae38352 | 1485 | -- |
c906108c SS |
1486 | |
1487 | Perhaps "i source" should take an argument like that of "list". | |
1488 | ||
7ae38352 | 1489 | -- |
c906108c SS |
1490 | |
1491 | Remove "at 0xnnnn" from the "b foo" response, if `print address off' and if | |
1492 | it matches the source line indicated. | |
1493 | ||
7ae38352 | 1494 | -- |
c906108c | 1495 | |
7ae38352 | 1496 | The prompt at end of screen should accept space as well as CR. |
c906108c | 1497 | |
7ae38352 | 1498 | -- |
c906108c SS |
1499 | |
1500 | Backtrace should point out what the currently selected frame is, in | |
1501 | its display, perhaps showing "@3 foo (bar, ...)" or ">3 foo (bar, | |
1502 | ...)" rather than "#3 foo (bar, ...)". | |
1503 | ||
7ae38352 AC |
1504 | -- |
1505 | ||
c906108c SS |
1506 | "i program" should work for core files, and display more info, like what |
1507 | actually caused it to die. | |
1508 | ||
7ae38352 AC |
1509 | -- |
1510 | ||
c906108c SS |
1511 | "x/10i" should shorten the long name, if any, on subsequent lines. |
1512 | ||
7ae38352 | 1513 | -- |
c906108c SS |
1514 | |
1515 | "next" over a function that longjumps, never stops until next time you happen | |
1516 | to get to that spot by accident. E.g. "n" over execute_command which has | |
1517 | an error. | |
1518 | ||
7ae38352 AC |
1519 | -- |
1520 | ||
c906108c SS |
1521 | "set zeroprint off", don't bother printing members of structs which |
1522 | are entirely zero. Useful for those big structs with few useful | |
1523 | members. | |
1524 | ||
7ae38352 AC |
1525 | -- |
1526 | ||
c906108c SS |
1527 | GDB does four ioctl's for every command, probably switching terminal modes |
1528 | to/from inferior or for readline or something. | |
1529 | ||
7ae38352 AC |
1530 | -- |
1531 | ||
c906108c SS |
1532 | terminal_ours versus terminal_inferior: cache state. Switch should be a noop |
1533 | if the state is the same, too. | |
1534 | ||
7ae38352 | 1535 | -- |
c906108c SS |
1536 | |
1537 | "i frame" shows wrong "arglist at" location, doesn't show where the args | |
1538 | should be found, only their actual values. | |
1539 | ||
7ae38352 AC |
1540 | -- |
1541 | ||
c906108c SS |
1542 | There should be a way for "set" commands to validate the new setting |
1543 | before it takes effect. | |
1544 | ||
7ae38352 | 1545 | -- |
c906108c SS |
1546 | |
1547 | "ena d" is ambiguous, why? "ena delete" seems to think it is a command! | |
1548 | ||
7ae38352 | 1549 | -- |
c906108c SS |
1550 | |
1551 | i line VAR produces "Line number not known for symbol ``var''.". I | |
1552 | thought we were stashing that info now! | |
1553 | ||
7ae38352 AC |
1554 | -- |
1555 | ||
c906108c SS |
1556 | We should be able to write to random files at hex offsets like adb. |
1557 | ||
7ae38352 AC |
1558 | -- |
1559 | ||
7ae38352 AC |
1560 | [elena - delete this] |
1561 | ||
c906108c SS |
1562 | Handle add_file with separate text, data, and bss addresses. Maybe |
1563 | handle separate addresses for each segment in the object file? | |
1564 | ||
7ae38352 AC |
1565 | -- |
1566 | ||
1567 | [Jimb/Elena delete this one] | |
1568 | ||
c906108c SS |
1569 | Handle free_named_symtab to cope with multiply-loaded object files |
1570 | in a dynamic linking environment. Should remember the last copy loaded, | |
1571 | but not get too snowed if it finds references to the older copy. | |
1572 | ||
7ae38352 AC |
1573 | -- |
1574 | ||
1575 | [elena delete this also] | |
c906108c SS |
1576 | |
1577 | Remove all references to: | |
1578 | text_offset | |
1579 | data_offset | |
1580 | text_data_start | |
1581 | text_end | |
1582 | exec_data_offset | |
1583 | ... | |
1584 | now that we have BFD. All remaining are in machine dependent files. | |
1585 | ||
7ae38352 | 1586 | -- |
c906108c SS |
1587 | |
1588 | Re-organize help categories into things that tend to fit on a screen | |
1589 | and hang together. | |
1590 | ||
7ae38352 | 1591 | -- |
c906108c SS |
1592 | |
1593 | Add in commands like ADB's for searching for patterns, etc. We should | |
1594 | be able to examine and patch raw unsymboled binaries as well in gdb as | |
1595 | we can in adb. (E.g. increase the timeout in /bin/login without source). | |
1596 | ||
7ae38352 AC |
1597 | [actually, add ADB interface :-] |
1598 | ||
1599 | -- | |
c906108c SS |
1600 | |
1601 | When doing "step" or "next", if a few lines of source are skipped between | |
1602 | the previous line and the current one, print those lines, not just the | |
1603 | last line of a multiline statement. | |
1604 | ||
7ae38352 | 1605 | -- |
c906108c SS |
1606 | |
1607 | Handling of "&" address-of operator needs some serious overhaul | |
1608 | for ANSI C and consistency on arrays and functions. | |
1609 | For "float point[15];": | |
1610 | ptype &point[4] ==> Attempt to take address of non-lvalue. | |
1611 | For "char *malloc();": | |
1612 | ptype malloc ==> "char *()"; should be same as | |
1613 | ptype &malloc ==> "char *(*)()" | |
1614 | call printf ("%x\n", malloc) ==> weird value, should be same as | |
1615 | call printf ("%x\n", &malloc) ==> correct value | |
1616 | ||
7ae38352 AC |
1617 | -- |
1618 | ||
c906108c SS |
1619 | Fix dbxread.c symbol reading in the presence of interrupts. It |
1620 | currently leaves a cleanup to blow away the entire symbol table when a | |
1621 | QUIT occurs. (What's wrong with that? -kingdon, 28 Oct 1993). | |
1622 | ||
7ae38352 AC |
1623 | [I suspect that the grype was that, on a slow system, you might want |
1624 | to cntrl-c and get just half the symbols and then load the rest later | |
1625 | - scary to be honest] | |
1626 | ||
1627 | -- | |
1628 | ||
c906108c SS |
1629 | Mipsread.c reads include files depth-first, because the dependencies |
1630 | in the psymtabs are way too inclusive (it seems to me). Figure out what | |
1631 | really depends on what, to avoid recursing 20 or 30 times while reading | |
1632 | real symtabs. | |
1633 | ||
7ae38352 AC |
1634 | -- |
1635 | ||
c906108c SS |
1636 | value_add() should be subtracting the lower bound of arrays, if known, |
1637 | and possibly checking against the upper bound for error reporting. | |
1638 | ||
7ae38352 | 1639 | -- |
c906108c SS |
1640 | |
1641 | When listing source lines, check for a preceding \n, to verify that | |
1642 | the file hasn't changed out from under us. | |
1643 | ||
7ae38352 AC |
1644 | [fixed by some other means I think. That hack wouldn't actually work |
1645 | reliably - the file might move such that another \n appears. ] | |
c906108c | 1646 | |
7ae38352 | 1647 | -- |
c906108c SS |
1648 | |
1649 | Get all the remote systems (where the protocol allows it) to be able to | |
1650 | stop the remote system when the GDB user types ^C (like remote.c | |
1651 | does). For ebmon, use ^Ak. | |
1652 | ||
7ae38352 AC |
1653 | -- |
1654 | ||
c906108c SS |
1655 | Possible feature: A version of the "disassemble" command which shows |
1656 | both source and assembly code ("set symbol-filename on" is a partial | |
1657 | solution). | |
1658 | ||
7ae38352 AC |
1659 | [has this been done? It was certainly done for MI and GDBtk] |
1660 | ||
1661 | -- | |
1662 | ||
c906108c SS |
1663 | investigate "x/s 0" (right now stops early) (I think maybe GDB is |
1664 | using a 0 address for bad purposes internally). | |
1665 | ||
7ae38352 AC |
1666 | -- |
1667 | ||
c906108c SS |
1668 | Make "info path" and path_command work again (but independent of the |
1669 | environment either of gdb or that we'll pass to the inferior). | |
1670 | ||
7ae38352 AC |
1671 | -- |
1672 | ||
c906108c SS |
1673 | Make GDB understand the GCC feature for putting octal constants in |
1674 | enums. Make it so overflow on an enum constant does not error_type | |
1675 | the whole type. Allow arbitrarily large enums with type attributes. | |
1676 | Put all this stuff in the testsuite. | |
1677 | ||
7ae38352 AC |
1678 | -- |
1679 | ||
c906108c SS |
1680 | Make TYPE_CODE_ERROR with a non-zero TYPE_LENGTH more useful (print |
1681 | the value in hex; process type attributes). Add this to the | |
1682 | testsuite. This way future compilers can add new types and old | |
1683 | versions of GDB can do something halfway reasonable. | |
1684 | ||
7ae38352 | 1685 | -- |
c906108c SS |
1686 | |
1687 | Fix mdebugread.c:parse_type to do fundamental types right (see | |
1688 | rs6000_builtin_type in stabsread.c for what "right" is--the point is | |
1689 | that the debug format fixes the sizes of these things and it shouldn't | |
1690 | depend on stuff like TARGET_PTR_BIT and so on. For mdebug, there seem | |
1691 | to be separate bt* codes for 64 bit and 32 bit things, and GDB should | |
1692 | be aware of that). Also use a switch statement for clarity and speed. | |
1693 | ||
7ae38352 AC |
1694 | -- |
1695 | ||
c906108c SS |
1696 | Investigate adding symbols in target_load--some targets do, some |
1697 | don't. | |
1698 | ||
7ae38352 AC |
1699 | -- |
1700 | ||
c906108c SS |
1701 | Put dirname in psymtabs and change lookup*symtab to use dirname (so |
1702 | /foo/bar.c works whether compiled by cc /foo/bar.c, or cd /foo; cc | |
1703 | bar.c). | |
1704 | ||
7ae38352 AC |
1705 | -- |
1706 | ||
c906108c SS |
1707 | Merge xcoffread.c and coffread.c. Use breakpoint_re_set instead of |
1708 | fixup_breakpoints. | |
1709 | ||
7ae38352 | 1710 | -- |
c906108c SS |
1711 | |
1712 | Make a watchpoint which contains a function call an error (it is | |
1713 | broken now, making it work is probably not worth the effort). | |
1714 | ||
7ae38352 | 1715 | -- |
c906108c SS |
1716 | |
1717 | New test case based on weird.exp but in which type numbers are not | |
1718 | renumbered (thus multiply defining a type). This currently causes an | |
1719 | infinite loop on "p v_comb". | |
1720 | ||
7ae38352 | 1721 | -- |
c906108c | 1722 | |
7ae38352 | 1723 | [Hey! Hint Hint Delete Delete!!!] |
c906108c SS |
1724 | |
1725 | Fix 386 floating point so that floating point registers are real | |
1726 | registers (but code can deal at run-time if they are missing, like | |
1727 | mips and 68k). This would clean up "info float" and related stuff. | |
1728 | ||
7ae38352 | 1729 | -- |
c906108c SS |
1730 | |
1731 | gcc -g -c enummask.c then gdb enummask.o, then "p v". GDB complains | |
1732 | about not being able to access memory location 0. | |
1733 | ||
1734 | -------------------- enummask.c | |
1735 | enum mask | |
1736 | { | |
1737 | ANIMAL = 0, | |
1738 | VEGETABLE = 1, | |
1739 | MINERAL = 2, | |
1740 | BASIC_CATEGORY = 3, | |
1741 | ||
1742 | WHITE = 0, | |
1743 | BLUE = 4, | |
1744 | GREEN = 8, | |
1745 | BLACK = 0xc, | |
1746 | COLOR = 0xc, | |
1747 | ||
1748 | ALIVE = 0x10, | |
1749 | ||
1750 | LARGE = 0x20 | |
1751 | } v; | |
1752 | ||
7ae38352 AC |
1753 | -- |
1754 | ||
c906108c SS |
1755 | If try to modify value in file with "set write off" should give |
1756 | appropriate error not "cannot access memory at address 0x65e0". | |
1757 | ||
7ae38352 | 1758 | -- |
c906108c | 1759 | |
c906108c SS |
1760 | Allow core file without exec file on RS/6000. |
1761 | ||
7ae38352 AC |
1762 | -- |
1763 | ||
c906108c SS |
1764 | Make sure "shell" with no arguments works right on DOS. |
1765 | ||
7ae38352 AC |
1766 | -- |
1767 | ||
c906108c SS |
1768 | Make gdb.ini (as well as .gdbinit) be checked on all platforms, so |
1769 | the same directory can be NFS-mounted on unix or DOS, and work the | |
1770 | same way. | |
1771 | ||
7ae38352 AC |
1772 | -- |
1773 | ||
1774 | [Is this another delete???] | |
c906108c SS |
1775 | |
1776 | Get SECT_OFF_TEXT stuff out of objfile_relocate (might be needed to | |
1777 | get RS/6000 to work right, might not be immediately relevant). | |
1778 | ||
7ae38352 | 1779 | -- |
c906108c SS |
1780 | |
1781 | Work out some kind of way to allow running the inferior to be done as | |
1782 | a sub-execution of, eg. breakpoint command lists. Currently running | |
1783 | the inferior interupts any command list execution. This would require | |
1784 | some rewriting of wait_for_inferior & friends, and hence should | |
1785 | probably be done in concert with the above. | |
1786 | ||
7ae38352 AC |
1787 | -- |
1788 | ||
c906108c SS |
1789 | Add function arguments to gdb user defined functions. |
1790 | ||
7ae38352 AC |
1791 | -- |
1792 | ||
c906108c SS |
1793 | Add convenience variables that refer to exec file, symbol file, |
1794 | selected frame source file, selected frame function, selected frame | |
1795 | line number, etc. | |
1796 | ||
7ae38352 AC |
1797 | -- |
1798 | ||
c906108c SS |
1799 | Modify the handling of symbols grouped through BINCL/EINCL stabs to |
1800 | allocate a partial symtab for each BINCL/EINCL grouping. This will | |
1801 | seriously decrease the size of inter-psymtab dependencies and hence | |
1802 | lessen the amount that needs to be read in when a new source file is | |
1803 | accessed. | |
1804 | ||
7ae38352 | 1805 | -- |
c906108c | 1806 | |
c906108c SS |
1807 | Add a command for searching memory, a la adb. It specifies size, |
1808 | mask, value, start address. ADB searches until it finds it or hits | |
1809 | an error (or is interrupted). | |
1810 | ||
7ae38352 AC |
1811 | -- |
1812 | ||
b83266a0 SS |
1813 | Remove the range and type checking code and documentation, if not |
1814 | going to implement. | |
1815 | ||
c906108c SS |
1816 | # Local Variables: |
1817 | # mode: text | |
1818 | # End: |