[deliverable/binutils-gdb.git] / gdb / configure.in

configdirs="doc testsuite"
srcname="GDB"
srctrigger=main.c

# per-host:

# Map host cpu into the config cpu subdirectory name.
# The default is $host_cpu.

case "${host_cpu}" in

c[12])			gdb_host_cpu=convex ;;
hppa*)			gdb_host_cpu=pa ;;
i[34]86)		gdb_host_cpu=i386 ;;
m68*)			gdb_host_cpu=m68k ;;
np1)			gdb_host_cpu=gould ;;
pyramid)		gdb_host_cpu=pyr ;;
*)			gdb_host_cpu=$host_cpu ;;

esac

# map host info into gdb names.

case "${host}" in

a29k-*-*)		gdb_host=ultra3 ;;

arm-*-*)		gdb_host=arm ;;

c[12]-*-*)		gdb_host=convex ;;

hppa*-hp-bsd*)		gdb_host=hppabsd ;;
hppa*-hp-hpux*)		gdb_host=hppahpux ;;

i[34]86-ncr-*)		gdb_host=ncr3000 ;;
i[34]86-sequent-*)	gdb_host=symmetry ;;

i[34]86-*-bsd*)		gdb_host=i386bsd ;;
i[34]86-*-go32)		gdb_host=go32 ;;
i[34]86-*-linux)	gdb_host=linux ;;
i[34]86-*-mach)		gdb_host=i386mach ;;
i[34]86-*-sco3.2v4*)	gdb_host=i386sco4 ;;
i[34]86-*-sco*)		gdb_host=i386sco ;;
i[34]86-*-solaris*)	gdb_host=i386sol2 ;;
i[34]86-*-sunos*)	gdb_host=sun386 ;;
i[34]86-*-sysv3.2)	gdb_host=i386v32 ;;
i[34]86-*-sysv4*)	gdb_host=i386v4 ;;
i[34]86-*-sysv*)	gdb_host=i386v ;;
i[34]86-*-isc*)		gdb_host=i386v32 ;;

m680[01]0-sun-sunos3*)	gdb_host=sun2os3 ;;
m680[01]0-sun-sunos4*)	gdb_host=sun2os4 ;;
m68030-sony-*)		gdb_host=news1000 ;;

m68*-altos-*)		gdb_host=altos ;;
m68*-apollo*-sysv*)	gdb_host=apollo68v ;;
m68*-apollo*-bsd*)	gdb_host=apollo68b ;;
m68*-att-*)		gdb_host=3b1 ;;
m68*-cbm-sysv4*)	gdb_host=amix ;;
m68*-hp-bsd*)		gdb_host=hp300bsd ;;
m68*-hp-hpux*)		gdb_host=hp300hpux ;;
m68*-isi-*)		gdb_host=isi ;;
m68*-sony-*)		gdb_host=news ;;
m68*-sun-sunos3*)	gdb_host=sun3os3 ;;
m68*-sun-sunos4*)	gdb_host=sun3os4 ;;
m68*-sun-*)		gdb_host=sun3os4 ;;

m88k-motorola-*)	gdb_host=delta88 ;;
m88k-*-*)		gdb_host=m88k ;;

mips-dec-*)		gdb_host=decstation ;;
mips-little-*)		gdb_host=littlemips ;;
mips-sgi-irix3)		gdb_host=irix3 ;;
mips-sgi-irix4*)	gdb_host=irix4 ;;
mips-sony-*)		gdb_host=bigmips ;;

none-*-*)		gdb_host=none ;;

np1-*-*)		gdb_host=np1 ;;

ns32k-umax-*)		gdb_host=umax ;;
ns32k-utek-sysv)	gdb_host=merlin ;;

pn-*-*)			gdb_host=pn ;;

pyramid-*-*)		gdb_host=pyramid ;;

romp-*-*)		gdb_host=rtbsd ;;

rs6000-*-*)		gdb_host=rs6000 ;;

sparc-*-solaris2*)	gdb_host=sun4sol2 ;;
sparc-*-sunos4*)	gdb_host=sun4os4 ;;
sparc-*-*)		gdb_host=sun4os4 ;;

tahoe-*-*)		gdb_host=tahoe ;;

vax-*-bsd*)		gdb_host=vaxbsd ;;
vax-*-ultrix2*)		gdb_host=vaxult2 ;;
vax-*-ultrix*)		gdb_host=vaxult ;;

esac


if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
	echo '***' "Gdb does not support host ${host}" 1>&2
	exit 1
fi

#  We really shouldn't depend on there being a space after XM_FILE= ...
hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`

# per-target:

# Map target cpu into the config cpu subdirectory name.
# The default is $target_cpu.

case "${target_cpu}" in

c[12])			gdb_target_cpu=convex ;;
hppa*)			gdb_target_cpu=pa ;;
i[34]86)		gdb_target_cpu=i386 ;;
m68*)			gdb_target_cpu=m68k ;;
np1)			gdb_target_cpu=gould ;;
pn)			gdb_target_cpu=gould ;;
pyramid)		gdb_target_cpu=pyr ;;
sparclite)		gdb_target_cpu=sparc
			configdirs="${configdirs} sparclite"
			;;
sparc*)			gdb_target_cpu=sparc ;;
*)			gdb_target_cpu=$target_cpu ;;

esac

# map target info into gdb names.

case "${target}" in

a29k-*-aout)		gdb_target=a29k ;;
a29k-*-coff)		gdb_target=a29k ;;
a29k-*-elf)		gdb_target=a29k ;;
a29k-*-ebmon)		gdb_target=a29k ;;
a29k-*-kern)		gdb_target=a29k-kern ;;
a29k-*-none)		gdb_target=a29k ;;
a29k-*-sym1)		gdb_target=ultra3 ;;
a29k-*-udi)		gdb_target=a29k-udi ;;

arm-*-*)		gdb_target=arm ;;

c1-*-*)			gdb_target=convex ;;
c2-*-*)			gdb_target=convex ;;

h8300-*-*)		gdb_target=h8300hms ;;
h8500-*-*)		gdb_target=h8500hms ;;

sh-*-*)			gdb_target=sh ;;

hppa*-*-bsd*)		gdb_target=hppabsd ;;
hppa*-*-hpux*)		gdb_target=hppahpux ;;

i[34]86-sequent-*)	gdb_target=symmetry ;;
i[34]86-ncr-*)		gdb_target=ncr3000 ;;

i[34]86-*-aout)		gdb_target=i386aout ;;
i[34]86-*-coff)		gdb_target=i386v ;;
i[34]86-*-elf)		gdb_target=i386v ;;

i[34]86-*-bsd*)		gdb_target=i386bsd ;;
i[34]86-*-go32)		gdb_target=i386aout ;;
i[34]86-*-lynx*)	gdb_target=i386lynx
			configdirs="${configdirs} gdbserver"
			;;
i[34]86-*-solaris*)	gdb_target=i386sol2 ;;
i[34]86-*-sunos*)	gdb_target=sun386 ;;
i[34]86-*-sysv4*)	gdb_target=i386v4 ;;
i[34]86-*-sco*)		gdb_target=i386v ;;
i[34]86-*-sysv*)	gdb_target=i386v ;;
i[34]86-*-linux*)	gdb_target=linux ;;
i[34]86-*-isc*)		gdb_target=i386v ;;

i960-*-bout)		gdb_target=vxworks960 ;;
i960-*-coff)		gdb_target=nindy960 ;;
i960-*-elf)		gdb_target=nindy960 ;;

i960-*-nindy)		gdb_target=nindy960 ;;
i960-*-vxworks)		gdb_target=vxworks960 ;;

m68000-*-aout)		gdb_target=m68k-nofp ;;
m68000-*-coff)		gdb_target=m68k-nofp ;;
m68000-*-elf)		gdb_target=m68k-nofp ;;
m68000-*-sunos3*)	gdb_target=sun2os3 ;;
m68000-*-sunos4*)	gdb_target=sun2os4 ;;

m68*-cbm-sysv4*)	gdb_target=amix ;;
m68*-hp-bsd*)		gdb_target=hp300bsd ;;
m68*-hp-hpux*)		gdb_target=hp300hpux ;;

m68*-altos-*)		gdb_target=altos ;;
m68*-att-*)		gdb_target=3b1 ;;
m68*-ericsson-*)	gdb_target=es1800 ;;
m68*-isi-*)		gdb_target=isi ;;
m68*-netx-*)		gdb_target=vxworks68 ;;
m68*-sony-*)		gdb_target=news ;;
m68*-tandem-*)		gdb_target=st2000 ;;

m68*-rom68k-*)          gdb_target=monitor ;;
m68*-*bug-*)            gdb_target=monitor ;;
m68*-monitor-*)         gdb_target=monitor ;;

m68*-*-aout)		gdb_target=m68k-fp ;;
m68*-*-coff)		gdb_target=m68k-fp ;;
m68*-*-elf)		gdb_target=m68k-fp ;;
m68*-*-os68k)		gdb_target=os68k ;;
m68*-*-sunos3*)		gdb_target=sun3os3 ;;
m68*-*-sunos4*)		gdb_target=sun3os4 ;;
m68*-*-vxworks*)	gdb_target=vxworks68 ;;

m88k-motorola-*)	gdb_target=delta88 ;;
m88k-*-*)		gdb_target=m88k ;;

mips-big-*)		gdb_target=bigmips ;;
mips-dec-*)		gdb_target=decstation ;;
mips-idt-ecoff)		gdb_target=idt ;;
mips-little-*)		gdb_target=littlemips ;;
mips-sgi-*)		gdb_target=irix3 ;;
mips-sony-*)		gdb_target=bigmips ;;

none-*-*)		gdb_target=none ;;

np1-*-*)		gdb_target=np1 ;;

ns32k-utek-sysv)	gdb_target=merlin ;;
ns32k-utek-*)		gdb_target=umax ;;

pn-*-*)			gdb_target=pn ;;

pyramid-*-*)		gdb_target=pyramid ;;

rs6000-*-*)		gdb_target=rs6000 ;;

sparc-*-aout)		gdb_target=sparc-em ;;
sparc-*-coff)		gdb_target=sparc-em ;;
sparc-*-elf)		gdb_target=sparc-em ;;
sparc-*-solaris2*)	gdb_target=sun4sol2 ;;
sparc-*-sunos4*)	gdb_target=sun4os4 ;;
sparc-*-vxworks*)	gdb_target=sparc-em ;;
sparc-*-*)		gdb_target=sun4os4 ;;
sparclite*-*-*)		gdb_target=sparclite ;;

tahoe-*-*)		gdb_target=tahoe ;;
vax-*-*)		gdb_target=vax ;;

z8k-*-sim)		gdb_target=z8ksim ;;
esac

if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
	echo '***' "Gdb does not support target ${target}" 1>&2
	exit 1
fi

if [ -z "${removing}" ] ; then
	cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
		print substr($0,6)}'
fi

#  We really shouldn't depend on there being a space after TM_FILE= ...
targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`

if [ "${target}" = "${host}" ] ; then
	nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
fi

host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt

# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
# (NAT_FILE) is not set in the ?config/* file, we don't make the
# corresponding links.  But we have to remove the xm.h files and tm.h
# files anyway, e.g. when switching from "configure host" to
# "configure none".

files=
links=
rm -f xm.h
if [ "${hostfile}" != "" ]; then
	if [ -f ${srcdir}/config/${hostfile} ]; then
		files="${files} config/${hostfile}"
	else
		files="${files} config/${gdb_host_cpu}/${hostfile}"
	fi
	links="${links} xm.h"
fi
rm -f tm.h
if [ "${targetfile}" != "" ]; then
	if [ -f ${srcdir}/config/${targetfile} ]; then
		files="${files} config/${targetfile}"
	else
		files="${files} config/${gdb_target_cpu}/${targetfile}"
	fi
	links="${links} tm.h"
fi
rm -f nm.h
if [ "${nativefile}" != "" ]; then
	if [ -f ${srcdir}/config/${nativefile} ]; then
		files="${files} config/${nativefile}"
	else
		files="${files} config/${gdb_host_cpu}/${nativefile}"
	fi
	links="${links} nm.h"
# temporary scaffolding until all hosts have the host/target/native
# split in place.
else
	files="${files} config/nm-trash.h"
	links="${links} nm.h"
fi

# post-target:

case ${srcdir} in
  .)
    ;;
  *)
    grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
      echo "source ${srcdir}/.gdbinit" >> .gdbinit
esac

if [ "${nativefile}" = "" ] ; then
	sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
		< Makefile > Makefile.tem
	mv -f Makefile.tem Makefile
fi

cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile
Commit	Line	Data
6a936870	1	configdirs="doc testsuite"
912e0732 RP	2	srcname="GDB"
912e0732 RP	3	srctrigger=main.c
bc028766	4
0df06ca0 RP	5	# per-host:
0df06ca0 RP	6
1a0edbc7 FF	7	# Map host cpu into the config cpu subdirectory name.
	8	# The default is $host_cpu.
	9
	10	case "${host_cpu}" in
	11
	12	c[12]) gdb_host_cpu=convex ;;
	13	hppa*) gdb_host_cpu=pa ;;
	14	i[34]86) gdb_host_cpu=i386 ;;
	15	m68*) gdb_host_cpu=m68k ;;
	16	np1) gdb_host_cpu=gould ;;
	17	pyramid) gdb_host_cpu=pyr ;;
	18	*) gdb_host_cpu=$host_cpu ;;
	19
	20	esac
	21
6c815bbe RP	22	# map host info into gdb names.
6c815bbe RP	23
19758e9e	24	case "${host}" in
6c815bbe	25
19758e9e JG	26	a29k--) gdb_host=ultra3 ;;
	27
	28	arm--) gdb_host=arm ;;
	29
	30	c[12]--) gdb_host=convex ;;
	31
8f59e92b FF	32	hppa-hp-bsd) gdb_host=hppabsd ;;
8f59e92b FF	33	hppa-hp-hpux) gdb_host=hppahpux ;;
19758e9e	34
19758e9e	35	i[34]86-ncr-*) gdb_host=ncr3000 ;;
ef131e13	36	i[34]86-sequent-*) gdb_host=symmetry ;;
19758e9e	37
6d685882	38	i[34]86--bsd) gdb_host=i386bsd ;;
30ffb593	39	i[34]86-*-go32) gdb_host=go32 ;;
ef131e13 JG	40	i[34]86-*-linux) gdb_host=linux ;;
ef131e13 JG	41	i[34]86-*-mach) gdb_host=i386mach ;;
117f631e	42	i[34]86--sco3.2v4) gdb_host=i386sco4 ;;
cf57ff2a	43	i[34]86--sco) gdb_host=i386sco ;;
5c820c19	44	i[34]86--solaris) gdb_host=i386sol2 ;;
b1aa08e2	45	i[34]86--sunos) gdb_host=sun386 ;;
3f06498a	46	i[34]86-*-sysv3.2) gdb_host=i386v32 ;;
19758e9e JG	47	i[34]86--sysv4) gdb_host=i386v4 ;;
19758e9e JG	48	i[34]86--sysv) gdb_host=i386v ;;
e23a6896	49	i[34]86--isc) gdb_host=i386v32 ;;
19758e9e	50
358ca35e JG	51	m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
358ca35e JG	52	m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
ef131e13	53	m68030-sony-*) gdb_host=news1000 ;;
19758e9e	54
358ca35e JG	55	m68-altos-) gdb_host=altos ;;
	56	m68-apollo-sysv*) gdb_host=apollo68v ;;
	57	m68-apollo-bsd*) gdb_host=apollo68b ;;
	58	m68-att-) gdb_host=3b1 ;;
	59	m68-cbm-sysv4) gdb_host=amix ;;
8f59e92b FF	60	m68-hp-bsd) gdb_host=hp300bsd ;;
8f59e92b FF	61	m68-hp-hpux) gdb_host=hp300hpux ;;
358ca35e JG	62	m68-isi-) gdb_host=isi ;;
	63	m68-sony-) gdb_host=news ;;
	64	m68-sun-sunos3) gdb_host=sun3os3 ;;
	65	m68-sun-sunos4) gdb_host=sun3os4 ;;
	66	m68-sun-) gdb_host=sun3os4 ;;
19758e9e	67
19758e9e JG	68	m88k-motorola-*) gdb_host=delta88 ;;
	69	m88k--) gdb_host=m88k ;;
	70
19758e9e JG	71	mips-dec-*) gdb_host=decstation ;;
	72	mips-little-*) gdb_host=littlemips ;;
	73	mips-sgi-irix3) gdb_host=irix3 ;;
81029114	74	mips-sgi-irix4*) gdb_host=irix4 ;;
ef131e13	75	mips-sony-*) gdb_host=bigmips ;;
19758e9e JG	76
19758e9e JG	77	none--) gdb_host=none ;;
ef131e13	78
19758e9e JG	79	np1--) gdb_host=np1 ;;
	80
	81	ns32k-umax-*) gdb_host=umax ;;
	82	ns32k-utek-sysv) gdb_host=merlin ;;
	83
19758e9e JG	84	pn--) gdb_host=pn ;;
	85
	86	pyramid--) gdb_host=pyramid ;;
	87
	88	romp--) gdb_host=rtbsd ;;
	89
	90	rs6000--) gdb_host=rs6000 ;;
	91
ef131e13	92	sparc--solaris2) gdb_host=sun4sol2 ;;
ebb3a1e5	93	sparc--sunos4) gdb_host=sun4os4 ;;
b52373a2	94	sparc--) gdb_host=sun4os4 ;;
19758e9e JG	95
	96	tahoe--) gdb_host=tahoe ;;
	97
	98	vax--bsd) gdb_host=vaxbsd ;;
6985bc54	99	vax--ultrix2) gdb_host=vaxult2 ;;
19758e9e	100	vax--ultrix) gdb_host=vaxult ;;
7da1e27d	101
6c815bbe RP	102	esac
6c815bbe RP	103
8c7ae4a2	104
1a0edbc7	105	if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
6c815bbe	106	echo '***' "Gdb does not support host ${host}" 1>&2
912e0732 RP	107	exit 1
	108	fi
	109
bdf3621b	110	# We really shouldn't depend on there being a space after XM_FILE= ...
1a0edbc7	111	hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
912e0732	112
0df06ca0	113	# per-target:
912e0732	114
1a0edbc7 FF	115	# Map target cpu into the config cpu subdirectory name.
	116	# The default is $target_cpu.
	117
	118	case "${target_cpu}" in
	119
	120	c[12]) gdb_target_cpu=convex ;;
	121	hppa*) gdb_target_cpu=pa ;;
	122	i[34]86) gdb_target_cpu=i386 ;;
	123	m68*) gdb_target_cpu=m68k ;;
	124	np1) gdb_target_cpu=gould ;;
	125	pn) gdb_target_cpu=gould ;;
	126	pyramid) gdb_target_cpu=pyr ;;
5fa46c42 SG	127	sparclite) gdb_target_cpu=sparc
	128	configdirs="${configdirs} sparclite"
	129	;;
0c101d49	130	sparc*) gdb_target_cpu=sparc ;;
1a0edbc7 FF	131	*) gdb_target_cpu=$target_cpu ;;
	132
	133	esac
	134
	135	# map target info into gdb names.
	136
ef131e13 JG	137	case "${target}" in
	138
	139	a29k-*-aout) gdb_target=a29k ;;
	140	a29k-*-coff) gdb_target=a29k ;;
ebb3a1e5	141	a29k-*-elf) gdb_target=a29k ;;
ef131e13 JG	142	a29k-*-ebmon) gdb_target=a29k ;;
	143	a29k-*-kern) gdb_target=a29k-kern ;;
	144	a29k-*-none) gdb_target=a29k ;;
	145	a29k-*-sym1) gdb_target=ultra3 ;;
	146	a29k-*-udi) gdb_target=a29k-udi ;;
	147
	148	arm--) gdb_target=arm ;;
	149
	150	c1--) gdb_target=convex ;;
	151	c2--) gdb_target=convex ;;
	152
	153	h8300--) gdb_target=h8300hms ;;
195e46ea	154	h8500--) gdb_target=h8500hms ;;
ef131e13	155
9faacb92 SC	156	sh--) gdb_target=sh ;;
9faacb92 SC	157
8f59e92b FF	158	hppa--bsd*) gdb_target=hppabsd ;;
8f59e92b FF	159	hppa--hpux*) gdb_target=hppahpux ;;
ef131e13 JG	160
	161	i[34]86-sequent-*) gdb_target=symmetry ;;
	162	i[34]86-ncr-*) gdb_target=ncr3000 ;;
ebb3a1e5 JG	163
	164	i[34]86-*-aout) gdb_target=i386aout ;;
	165	i[34]86-*-coff) gdb_target=i386v ;;
	166	i[34]86-*-elf) gdb_target=i386v ;;
	167
6d685882	168	i[34]86--bsd) gdb_target=i386bsd ;;
e633652f	169	i[34]86-*-go32) gdb_target=i386aout ;;
5fa46c42 SG	170	i[34]86--lynx) gdb_target=i386lynx
	171	configdirs="${configdirs} gdbserver"
	172	;;
5c820c19	173	i[34]86--solaris) gdb_target=i386sol2 ;;
ef131e13 JG	174	i[34]86--sunos) gdb_target=sun386 ;;
ef131e13 JG	175	i[34]86--sysv4) gdb_target=i386v4 ;;
cf57ff2a	176	i[34]86--sco) gdb_target=i386v ;;
ef131e13	177	i[34]86--sysv) gdb_target=i386v ;;
e23a6896 JK	178	i[34]86--linux) gdb_target=linux ;;
e23a6896 JK	179	i[34]86--isc) gdb_target=i386v ;;
ef131e13	180
ef131e13 JG	181	i960-*-bout) gdb_target=vxworks960 ;;
ef131e13 JG	182	i960-*-coff) gdb_target=nindy960 ;;
ebb3a1e5 JG	183	i960-*-elf) gdb_target=nindy960 ;;
ebb3a1e5 JG	184
ef131e13 JG	185	i960-*-nindy) gdb_target=nindy960 ;;
	186	i960-*-vxworks) gdb_target=vxworks960 ;;
	187
01deac12 JG	188	m68000-*-aout) gdb_target=m68k-nofp ;;
	189	m68000-*-coff) gdb_target=m68k-nofp ;;
	190	m68000-*-elf) gdb_target=m68k-nofp ;;
ebb3a1e5 JG	191	m68000--sunos3) gdb_target=sun2os3 ;;
ebb3a1e5 JG	192	m68000--sunos4) gdb_target=sun2os4 ;;
ef131e13	193
358ca35e	194	m68-cbm-sysv4) gdb_target=amix ;;
8f59e92b FF	195	m68-hp-bsd) gdb_target=hp300bsd ;;
8f59e92b FF	196	m68-hp-hpux) gdb_target=hp300hpux ;;
358ca35e JG	197
	198	m68-altos-) gdb_target=altos ;;
	199	m68-att-) gdb_target=3b1 ;;
	200	m68-ericsson-) gdb_target=es1800 ;;
	201	m68-isi-) gdb_target=isi ;;
	202	m68-netx-) gdb_target=vxworks68 ;;
	203	m68-sony-) gdb_target=news ;;
	204	m68-tandem-) gdb_target=st2000 ;;
	205
c1128340 RS	206	m68-rom68k-) gdb_target=monitor ;;
	207	m68-bug-*) gdb_target=monitor ;;
	208	m68-monitor-) gdb_target=monitor ;;
	209
84a05e52 JG	210	m68--aout) gdb_target=m68k-fp ;;
	211	m68--coff) gdb_target=m68k-fp ;;
	212	m68--elf) gdb_target=m68k-fp ;;
358ca35e JG	213	m68--os68k) gdb_target=os68k ;;
	214	m68--sunos3*) gdb_target=sun3os3 ;;
	215	m68--sunos4*) gdb_target=sun3os4 ;;
	216	m68--vxworks*) gdb_target=vxworks68 ;;
ef131e13 JG	217
	218	m88k-motorola-*) gdb_target=delta88 ;;
	219	m88k--) gdb_target=m88k ;;
	220
	221	mips-big-*) gdb_target=bigmips ;;
	222	mips-dec-*) gdb_target=decstation ;;
c2a0f1cb	223	mips-idt-ecoff) gdb_target=idt ;;
ef131e13 JG	224	mips-little-*) gdb_target=littlemips ;;
	225	mips-sgi-*) gdb_target=irix3 ;;
	226	mips-sony-*) gdb_target=bigmips ;;
	227
	228	none--) gdb_target=none ;;
	229
	230	np1--) gdb_target=np1 ;;
	231
	232	ns32k-utek-sysv) gdb_target=merlin ;;
	233	ns32k-utek-*) gdb_target=umax ;;
	234
	235	pn--) gdb_target=pn ;;
	236
	237	pyramid--) gdb_target=pyramid ;;
	238
	239	rs6000--) gdb_target=rs6000 ;;
	240
84a05e52 JG	241	sparc-*-aout) gdb_target=sparc-em ;;
	242	sparc-*-coff) gdb_target=sparc-em ;;
	243	sparc-*-elf) gdb_target=sparc-em ;;
ef131e13	244	sparc--solaris2) gdb_target=sun4sol2 ;;
ebb3a1e5	245	sparc--sunos4) gdb_target=sun4os4 ;;
84a05e52	246	sparc--vxworks) gdb_target=sparc-em ;;
b52373a2	247	sparc--) gdb_target=sun4os4 ;;
0c101d49	248	sparclite--*) gdb_target=sparclite ;;
ef131e13 JG	249
	250	tahoe--) gdb_target=tahoe ;;
	251	vax--) gdb_target=vax ;;
6c815bbe	252
a493d9a6	253	z8k-*-sim) gdb_target=z8ksim ;;
6c815bbe RP	254	esac
6c815bbe RP	255
1a0edbc7	256	if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
6c815bbe	257	echo '***' "Gdb does not support target ${target}" 1>&2
912e0732 RP	258	exit 1
	259	fi
	260
	261	if [ -z "${removing}" ] ; then
1a0edbc7	262	cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt \| awk '$1 == "#msg" {
912e0732 RP	263	print substr($0,6)}'
	264	fi
	265
bdf3621b	266	# We really shouldn't depend on there being a space after TM_FILE= ...
1a0edbc7	267	targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`
912e0732	268
d40309c7	269	if [ "${target}" = "${host}" ] ; then
1a0edbc7	270	nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
d40309c7 JG	271	fi
d40309c7 JG	272
1a0edbc7 FF	273	host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
1a0edbc7 FF	274	target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt
912e0732	275
d40309c7 JG	276	# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
	277	# (NAT_FILE) is not set in the ?config/* file, we don't make the
	278	# corresponding links. But we have to remove the xm.h files and tm.h
	279	# files anyway, e.g. when switching from "configure host" to
	280	# "configure none".
	281
bdf3621b JG	282	files=
bdf3621b JG	283	links=
dc0c3f64	284	rm -f xm.h
bdf3621b	285	if [ "${hostfile}" != "" ]; then
1a0edbc7 FF	286	if [ -f ${srcdir}/config/${hostfile} ]; then
	287	files="${files} config/${hostfile}"
	288	else
	289	files="${files} config/${gdb_host_cpu}/${hostfile}"
	290	fi
bdf3621b JG	291	links="${links} xm.h"
bdf3621b JG	292	fi
dc0c3f64	293	rm -f tm.h
bdf3621b	294	if [ "${targetfile}" != "" ]; then
1a0edbc7 FF	295	if [ -f ${srcdir}/config/${targetfile} ]; then
	296	files="${files} config/${targetfile}"
	297	else
	298	files="${files} config/${gdb_target_cpu}/${targetfile}"
	299	fi
bdf3621b JG	300	links="${links} tm.h"
bdf3621b JG	301	fi
1a0edbc7	302	rm -f nm.h
d40309c7	303	if [ "${nativefile}" != "" ]; then
1a0edbc7 FF	304	if [ -f ${srcdir}/config/${nativefile} ]; then
	305	files="${files} config/${nativefile}"
	306	else
	307	files="${files} config/${gdb_host_cpu}/${nativefile}"
	308	fi
dfc82617	309	links="${links} nm.h"
c9c23412 RP	310	# temporary scaffolding until all hosts have the host/target/native
	311	# split in place.
	312	else
1a0edbc7	313	files="${files} config/nm-trash.h"
dfc82617	314	links="${links} nm.h"
d40309c7	315	fi
bdf3621b JG	316
bdf3621b JG	317	# post-target:
912e0732	318
bdf3621b JG	319	case ${srcdir} in
	320	.)
	321	;;
	322	*)
	323	grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null \|\| \
	324	echo "source ${srcdir}/.gdbinit" >> .gdbinit
	325	esac
	326
c1ab5dba	327	if [ "${nativefile}" = "" ] ; then
41617f8b	328	sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
d40309c7 JG	329	< Makefile > Makefile.tem
	330	mv -f Makefile.tem Makefile
	331	fi
	332
dc0c3f64	333	cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile