[deliverable/binutils-gdb.git] / gdb / doc / .Sanitize

# .Sanitize for gdb/doc.

# Each directory to survive its way into a release will need a file
# like this one called "./.Sanitize".  All keyword lines must exist,
# and must exist in the order specified by this file.  Each directory
# in the tree will be processed, top down, in the following order.

# Hash started lines like this one are comments and will be deleted
# before anything else is done.  Blank lines will also be squashed
# out.

# The lines between the "Do-first:" line and the "Things-to-keep:"
# line are executed as a /bin/sh shell script before anything else is
# done in this directory.

Do-first:

# Note that gdbgui.texinfo is actually a generic document, but right
# now it only describes gdbtk, so we keep/lose as a gdbtk file.

gdbtk_files="gdbgui.texinfo"

if ( echo $* | grep keep\-gdbtk > /dev/null ) ; then
	keep_these_too="${gdbtk_files} ${keep_these_too}"
	if [ -n "${verbose}" ] ; then
		echo Keeping ${gdbtk_files}
	fi
else
	lose_these_too="${gdbtk_files} ${lose_these_too}"
	if [ -n "${verbose}" ] ; then
		echo Deleting ${gdbtk_files}
	fi
fi

# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept.  All other files will be removed.
# Directories listed in this section will have their own Sanitize
# called.  Directories not listed will be removed in their entirety
# with rm -rf.

# Note that we don't even keep the "config" directory, since it is
# not currently used (since we abolished use of M4 in the docs).

Things-to-keep:

ChangeLog
Makefile.in
a4rc.sed
all-cfg.texi
annotate.texi
configure.in
libgdb.texinfo
gdb.texinfo
gdbint.texinfo
h8-cfg.texi
lpsrc.sed
psrc.sed
refcard.tex
remote.texi
stabs.texinfo

Things-to-lose:

# Cygnus logo bitmap, huge file, no point in bundling all over the place.
cyglogo.eps
# Includes cyglogo.eps.
cygref.tex

# The README file for gdb testers using snapshots.
snapshots.readme

Do-last:

echo Catering to RMS by removing traces of \"gdbtk\"...

# Don't try to clean directories here, as the 'mv' command will fail.
# Also, grep fails on NFS mounted directories.
if ( echo $* | grep keep\-gdbtk > /dev/null ) ; then
	for i in * ; do
		if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
			echo Keeping gdbtk stuff in $i
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
			echo Removing traces of \"gdbtk\" out of $i...
			cp $i new
			sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				echo Caching $i in .Recover...
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi

# End of file.
Commit	Line	Data
08df3284	1	# .Sanitize for gdb/doc.
a3e65382	2
08df3284	3	# Each directory to survive its way into a release will need a file
a3e65382 RP	4	# like this one called "./.Sanitize". All keyword lines must exist,
	5	# and must exist in the order specified by this file. Each directory
	6	# in the tree will be processed, top down, in the following order.
	7
	8	# Hash started lines like this one are comments and will be deleted
	9	# before anything else is done. Blank lines will also be squashed
	10	# out.
	11
	12	# The lines between the "Do-first:" line and the "Things-to-keep:"
	13	# line are executed as a /bin/sh shell script before anything else is
08df3284	14	# done in this directory.
a3e65382 RP	15
	16	Do-first:
	17
237eaf37 SS	18	# Note that gdbgui.texinfo is actually a generic document, but right
	19	# now it only describes gdbtk, so we keep/lose as a gdbtk file.
	20
	21	gdbtk_files="gdbgui.texinfo"
	22
	23	if ( echo $* \| grep keep\-gdbtk > /dev/null ) ; then
	24	keep_these_too="${gdbtk_files} ${keep_these_too}"
	25	if [ -n "${verbose}" ] ; then
	26	echo Keeping ${gdbtk_files}
	27	fi
	28	else
	29	lose_these_too="${gdbtk_files} ${lose_these_too}"
	30	if [ -n "${verbose}" ] ; then
	31	echo Deleting ${gdbtk_files}
	32	fi
	33	fi
	34
a3e65382 RP	35	# All files listed between the "Things-to-keep:" line and the
	36	# "Files-to-sed:" line will be kept. All other files will be removed.
	37	# Directories listed in this section will have their own Sanitize
	38	# called. Directories not listed will be removed in their entirety
	39	# with rm -rf.
	40
145887f0 JG	41	# Note that we don't even keep the "config" directory, since it is
	42	# not currently used (since we abolished use of M4 in the docs).
	43
a3e65382 RP	44	Things-to-keep:
a3e65382 RP	45
ace52033	46	ChangeLog
3d29576b	47	Makefile.in
34a6ce55	48	a4rc.sed
a1330c48	49	all-cfg.texi
a9363218	50	annotate.texi
3d29576b	51	configure.in
429ad34d	52	libgdb.texinfo
a3e65382	53	gdb.texinfo
a3e65382	54	gdbint.texinfo
a1330c48	55	h8-cfg.texi
17cd0f82	56	lpsrc.sed
dcfc4f45	57	psrc.sed
73dfae8d	58	refcard.tex
e6616862	59	remote.texi
e505224d	60	stabs.texinfo
a3e65382	61
87756e15 RP	62	Things-to-lose:
87756e15 RP	63
274eb90a	64	# Cygnus logo bitmap, huge file, no point in bundling all over the place.
40055e58	65	cyglogo.eps
fd6d7556	66	# Includes cyglogo.eps.
40055e58 FF	67	cygref.tex
40055e58 FF	68
a09acbda FF	69	# The README file for gdb testers using snapshots.
a09acbda FF	70	snapshots.readme
87756e15	71
a3e65382 RP	72	Do-last:
a3e65382 RP	73
237eaf37 SS	74	echo Catering to RMS by removing traces of \"gdbtk\"...
	75
	76	# Don't try to clean directories here, as the 'mv' command will fail.
	77	# Also, grep fails on NFS mounted directories.
	78	if ( echo $* \| grep keep\-gdbtk > /dev/null ) ; then
	79	for i in * ; do
	80	if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
	81	echo Keeping gdbtk stuff in $i
	82	fi
	83	done
	84	else
	85	for i in * ; do
	86	if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
	87	echo Removing traces of \"gdbtk\" out of $i...
	88	cp $i new
	89	sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new
	90	if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
	91	echo Caching $i in .Recover...
	92	mv $i .Recover
	93	fi
	94	mv new $i
	95	fi
	96	done
	97	fi
	98
a3e65382	99	# End of file.