[deliverable/binutils-gdb.git] / gdb / doc / Makefile.in

##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
##2007, 2008 Free Software Foundation, Inc.

# Makefile for GDB documentation.
# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

srcdir = @srcdir@
VPATH = @srcdir@

prefix = @prefix@

infodir = @infodir@
pdfdir = $(prefix)/share/doc/gdb
htmldir = $(prefix)/html

SHELL = @SHELL@

LN_S = @LN_S@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs

# main GDB source directory
gdbdir = $(srcdir)/..

# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo

# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo

# Note that texinfo 4.0's makeinfo --html can only generate a
# single file, which would be too large, so continue to use
# texi2html. -sts 2000-03-28
# Contrary to documentation, the current directory is not
# searched by texi2html, so specify it explicitly.
# -macro 2007-07-26
MAKEHTML = texi2html
MAKEHTMLFLAGS = -menu -split_chapter -I .

# where to find texi2roff, ditto
TEXI2ROFF=texi2roff

# where to find texi2dvi, ditto
TEXI2DVI=texi2dvi

# Where is the source dir for the READLINE library doc?  
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc

# The GDB/MI docs come from a sibling directory ../mi
GDBMI_DIR = ${gdbdir}/mi

SET_TEXINPUTS = \
   TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS

# Files which should be generated via 'info' and installed by 'install-info'
INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info

# Files which should be generated via 'pdf' and installed by 'install-pdf'
PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf

# There may be alternate predefined collections of switches to configure
# the GDB manual.  Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all

# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
#    - Computer Modern (CM) fonts
#    - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
#  a4rc.sed     use A4 paper (297 x 210 mm)
#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
#      for A4, CM fonts:    REFEDITS = a4rc.sed
#      for US, PS fonts:    REFEDITS = psrc.sed
#      for default:
REFEDITS =

# Don Knuth's TeX formatter
TEX = tex
PDFTEX = pdftex

# Program to generate Postscript files from DVI files.
DVIPS = dvips

# Main GDB manual
GDB_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi \
	$(srcdir)/gpl.texi \
	$(srcdir)/agentexpr.texi \
	$(READLINE_DIR)/rluser.texi \
	$(READLINE_DIR)/inc-hist.texinfo
GDB_DOC_BUILD_INCLUDES = \
	gdb-cfg.texi \
	GDBvn.texi
GDB_DOC_FILES = \
	$(srcdir)/gdb.texinfo \
	$(GDB_DOC_SOURCE_INCLUDES) \
	$(GDB_DOC_BUILD_INCLUDES)

# Internals Manual
GDBINT_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi \
	$(srcdir)/observer.texi
GDBINT_DOC_BUILD_INCLUDES = \
	gdb-cfg.texi \
	GDBvn.texi
GDBINT_DOC_FILES = \
	$(srcdir)/gdbint.texinfo \
	$(GDBINT_DOC_SOURCE_INCLUDES) \
	$(GDBINT_DOC_BUILD_INCLUDES)

# Stabs manual: All files
STABS_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi
STABS_DOC_BUILD_INCLUDES =
STABS_DOC_FILES = \
	$(srcdir)/stabs.texinfo \
	$(STABS_DOC_SOURCE_INCLUDES) \
	$(STABS_DOC_BUILD_INCLUDES)

# Annotate migration document
ANNOTATE_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi
ANNOTATE_DOC_BUILD_INCLUDES = \
	gdb-cfg.texi
ANNOTATE_DOC_FILES = \
	$(srcdir)/annotate.texinfo \
	$(ANNOTATE_DOC_SOURCE_INCLUDES) \
	$(ANNOTATE_DOC_BUILD_INCLUDES)

#### Host, target, and site specific Makefile fragments come in here.
###

all:

info: $(INFO_DEPS)
dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
pdf: $(PDFFILES)
all-doc: info dvi ps # pdf
diststuff: info

install-info: $(INFO_DEPS)
	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

install-html: html
	for i in *.html ; do \
		$(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
	done

pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;

install-pdf: $(PDFFILES)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFFILES)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(pdf__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	done

STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf

# Copy the object files from a particular stage into a subdirectory.
stage1: force
	-mkdir stage1
	-mv $(STAGESTUFF) stage1

stage2: force
	-mkdir stage2
	-mv $(STAGESTUFF) stage2

stage3: force
	-mkdir stage3
	-mv $(STAGESTUFF) stage3

against=stage2

comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

de-stage1: force
	-(cd stage1 ; mv -f * ..)
	-rmdir stage1

de-stage2: force
	-(cd stage2 ; mv -f * ..)
	-rmdir stage2

de-stage3: force
	-(cd stage3 ; mv -f * ..)
	-rmdir stage3

# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
	echo > tmp.sed
	for f in x $(REFEDITS) ; do \
		test x$$f = xx && continue ; \
		cat $(srcdir)/$$f >>tmp.sed ; \
	done
	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
	$(SET_TEXINPUTS) $(TEX) sedref.tex
	mv sedref.dvi refcard.dvi
	rm -f sedref.log sedref.tex tmp.sed

refcard.ps : refcard.dvi
	$(DVIPS) -t landscape -o $@ $?

refcard.pdf : refcard.tex $(REFEDITS)
	echo > tmp.sed
	for f in x $(REFEDITS) ; do \
		test x$$f = xx && continue ; \
		cat $(srcdir)/$$f >>tmp.sed ; \
	done
	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
	$(SET_TEXINPUTS) $(PDFTEX) sedref.tex
	mv sedref.pdf refcard.pdf
	rm -f sedref.log sedref.tex tmp.sed

# File to record current GDB version number (copied from main dir version.in)
GDBvn.texi : ${gdbdir}/version.in
	echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
	mv GDBvn.new GDBvn.texi

# Updated atomically
.PRECIOUS: GDBvn.texi

# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	(test "$(LN_S)" = "ln -s" && \
	  ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
#   source directory for the benefit of people who *don't* use this makefile,
#   VPATH will often tell make not to bother building it, because the one
#   in the srcdir is up to date.  (if not, then make should build one here).

# Clean these up before each run.  Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
	gdb.tp* gdb.vr*

# GDB MANUAL: TeX dvi file
gdb.dvi: ${GDB_DOC_FILES}
	if [ ! -f ./GDBvn.texi ]; then \
		(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	rm -f $(GDB_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo

gdb.ps: gdb.dvi
	$(DVIPS) -o $@ $?

gdb.pdf: ${GDB_DOC_FILES}
	if [ ! -f ./GDBvn.texi ]; then \
		(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	rm -f $(GDB_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo

# GDB MANUAL: info file
gdb.info: ${GDB_DOC_FILES}
	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
		-o gdb.info $(srcdir)/gdb.texinfo

# GDB MANUAL: roff translations
# Try to use a recent texi2roff.  v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing 
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
#    corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate

# texi2roff doesn't have a notion of include dirs, so we have to fake 
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(GDB_DOC_SOURCE_INCLUDES)
	if [ ! -f gdb.texinfo ]; then \
		(test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
		ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
		cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
	fi
	touch links2roff

# gdb manual suitable for [gtn]roff -me
gdb.me: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -me | \
	sed -e 's/---/\\(em/g' \
	>gdb.me 

# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -ms | \
	sed -e 's/---/\\(em/g' \
	>gdb.ms 

# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
#   try leaving them in
gdb.mm: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e '/@noindent/d' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -mm | \
	sed -e 's/---/\\(em/g' \
	>gdb.mm 

# GDB MANUAL: HTML file

gdb_toc.html: ${GDB_DOC_FILES}
	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo

# Clean these up before each run.  Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*

# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi: $(GDBINT_DOC_FILES)
	rm -f $(GDBINT_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo

gdbint.ps : gdbint.dvi
	$(DVIPS) -o $@ $?

gdbint.pdf: $(GDBINT_DOC_FILES)
	rm -f $(GDBINT_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo

# GDB INTERNALS MANUAL: info file

gdbint.info: $(GDBINT_DOC_FILES)
	$(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo

# GDB INTERNALS MANUAL: HTML file

gdbint_toc.html: $(GDBINT_DOC_FILES)
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo

stabs.info: $(STABS_DOC_FILES)
	$(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo

# STABS DOCUMENTATION: HTML file

stabs_toc.html: $(STABS_DOC_FILES)
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo

# Clean these up before each run.  Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*

# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : $(STABS_DOC_FILES)
	rm -f $(STABS_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo

stabs.ps: stabs.dvi
	$(DVIPS) -o $@ $?

stabs.pdf: $(STABS_DOC_FILES)
	rm -f $(STABS_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo

# Clean these up before each run.  Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
	annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*

# ANNOTATE DOCUMENTATION: TeX dvi file
annotate.dvi : $(ANNOTATE_DOC_FILES)
	rm -f $(ANNOTATE_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo

annotate.ps: annotate.dvi
	$(DVIPS) -o $@ $?

annotate.pdf: $(ANNOTATE_DOC_FILES)
	rm -f $(ANNOTATE_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo

annotate.info: $(ANNOTATE_DOC_FILES)
	$(MAKEINFO)  -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo

annotate_toc.html: $(ANNOTATE_DOC_FILES)
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo

force:

Makefile: Makefile.in $(host_makefile_frag) config.status
	$(SHELL) ./config.status


# The "least clean" level of cleaning.  Get rid of files which are
# automatically generated files that are just intermediate files,

mostlyclean:
	rm -f gdb.mm gdb.ms gdb.me links2roff
	rm -f $(GDB_TEX_TMPS)
	rm -f $(GDBINT_TEX_TMPS)
	rm -f $(STABS_TEX_TMPS)
	rm -f $(ANNOTATE_TEX_TMPS)
	rm -f sedref.dvi sedref.tex tmp.sed

clean: mostlyclean
	rm -f gdb-cfg.texi

distclean: clean
	rm -f Makefile config.status config.log

# GDBvn.texi, the dvi files, the info files, and the postscript files, 
# are all part of the distribution, so it should not be removed by
# "clean" or "distclean".  Use maintainer-clean to remove them.

maintainer-clean realclean: distclean
	rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf

install: install-info

uninstall: uninstall-info
Commit	Line	Data
6aba47ca	1	##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
9b254dd1	2	##2007, 2008 Free Software Foundation, Inc.
c906108c SS	3
	4	# Makefile for GDB documentation.
	5	# This file is part of GDB.
	6
	7	# This program is free software; you can redistribute it and/or modify
	8	# it under the terms of the GNU General Public License as published by
	9	# the Free Software Foundation; either version 2 of the License, or
	10	# (at your option) any later version.
	11	#
	12	# This program is distributed in the hope that it will be useful,
	13	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	# GNU General Public License for more details.
	16	#
	17	# You should have received a copy of the GNU General Public License
	18	# along with this program; if not, write to the Free Software
c02a867d	19	# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
c906108c SS	20
	21	srcdir = @srcdir@
	22	VPATH = @srcdir@
	23
	24	prefix = @prefix@
	25
	26	infodir = @infodir@
9453113a	27	pdfdir = $(prefix)/share/doc/gdb
085dd6e6	28	htmldir = $(prefix)/html
c906108c SS	29
	30	SHELL = @SHELL@
	31
39ec5655 EZ	32	LN_S = @LN_S@
39ec5655 EZ	33
c906108c SS	34	INSTALL = @INSTALL@
	35	INSTALL_PROGRAM = @INSTALL_PROGRAM@
	36	INSTALL_DATA = @INSTALL_DATA@
	37
9453113a DJ	38	mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
9453113a DJ	39
c906108c SS	40	# main GDB source directory
	41	gdbdir = $(srcdir)/..
	42
	43	# where to find texinfo; GDB dist should include a recent one
	44	TEXIDIR=${gdbdir}/../texinfo
	45
	46	# where to find makeinfo, preferably one designed for texinfo-2
	47	MAKEINFO=makeinfo
	48
6d2ebf8b SS	49	# Note that texinfo 4.0's makeinfo --html can only generate a
	50	# single file, which would be too large, so continue to use
	51	# texi2html. -sts 2000-03-28
c80a96a8 MR	52	# Contrary to documentation, the current directory is not
	53	# searched by texi2html, so specify it explicitly.
	54	# -macro 2007-07-26
085dd6e6	55	MAKEHTML = texi2html
c80a96a8	56	MAKEHTMLFLAGS = -menu -split_chapter -I .
085dd6e6	57
c906108c SS	58	# where to find texi2roff, ditto
	59	TEXI2ROFF=texi2roff
	60
be298bcc AC	61	# where to find texi2dvi, ditto
	62	TEXI2DVI=texi2dvi
	63
c906108c SS	64	# Where is the source dir for the READLINE library doc?
	65	# Traditionally readline is in .. or .
	66	READLINE_DIR = ${gdbdir}/../readline/doc
	67
7162c0ca EZ	68	# The GDB/MI docs come from a sibling directory ../mi
	69	GDBMI_DIR = ${gdbdir}/mi
	70
	71	SET_TEXINPUTS = \
	72	TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
c906108c	73
63ac3005	74	# Files which should be generated via 'info' and installed by 'install-info'
e6f672d2	75	INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
63ac3005	76
9453113a DJ	77	# Files which should be generated via 'pdf' and installed by 'install-pdf'
	78	PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
	79
c906108c SS	80	# There may be alternate predefined collections of switches to configure
	81	# the GDB manual. Normally this is not done in synch with the software
	82	# config system, since this choice tends to be independent; most people
	83	# want a doc config of `all' for a generic manual, regardless of sw config.
	84	DOC_CONFIG = all
	85
	86	# This list of sed edits will edit the GDB reference card
	87	# for what fonts and what papersize to use.
	88	# By default (NO edits applied), the refcard uses:
	89	# - Computer Modern (CM) fonts
	90	# - US letter paper (8.5x11in)
	91	# List some of the following files for alternative fonts and paper:
	92	# a4rc.sed use A4 paper (297 x 210 mm)
	93	# psrc.sed use PostScript fonts (Karl Berry short TeX names)
	94	# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
	95	# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
	96	# for A4, CM fonts: REFEDITS = a4rc.sed
	97	# for US, PS fonts: REFEDITS = psrc.sed
	98	# for default:
	99	REFEDITS =
	100
	101	# Don Knuth's TeX formatter
	102	TEX = tex
9453113a	103	PDFTEX = pdftex
c906108c	104
c906108c SS	105	# Program to generate Postscript files from DVI files.
	106	DVIPS = dvips
	107
b0787093 AC	108	# Main GDB manual
b0787093 AC	109	GDB_DOC_SOURCE_INCLUDES = \
aab4e0ec	110	$(srcdir)/fdl.texi \
b0787093	111	$(srcdir)/gpl.texi \
f418dd93	112	$(srcdir)/agentexpr.texi \
5bdf8622	113	$(READLINE_DIR)/rluser.texi \
b0787093 AC	114	$(READLINE_DIR)/inc-hist.texinfo
	115	GDB_DOC_BUILD_INCLUDES = \
	116	gdb-cfg.texi \
	117	GDBvn.texi
	118	GDB_DOC_FILES = \
	119	$(srcdir)/gdb.texinfo \
	120	$(GDB_DOC_SOURCE_INCLUDES) \
	121	$(GDB_DOC_BUILD_INCLUDES)
	122
	123	# Internals Manual
	124	GDBINT_DOC_SOURCE_INCLUDES = \
bcd7e15f JB	125	$(srcdir)/fdl.texi \
bcd7e15f JB	126	$(srcdir)/observer.texi
b0787093 AC	127	GDBINT_DOC_BUILD_INCLUDES = \
	128	gdb-cfg.texi \
	129	GDBvn.texi
	130	GDBINT_DOC_FILES = \
	131	$(srcdir)/gdbint.texinfo \
	132	$(GDBINT_DOC_SOURCE_INCLUDES) \
	133	$(GDBINT_DOC_BUILD_INCLUDES)
	134
	135	# Stabs manual: All files
e5249f67 AC	136	STABS_DOC_SOURCE_INCLUDES = \
e5249f67 AC	137	$(srcdir)/fdl.texi
b0787093 AC	138	STABS_DOC_BUILD_INCLUDES =
	139	STABS_DOC_FILES = \
	140	$(srcdir)/stabs.texinfo \
	141	$(STABS_DOC_SOURCE_INCLUDES) \
	142	$(STABS_DOC_BUILD_INCLUDES)
c906108c	143
e6f672d2 AC	144	# Annotate migration document
	145	ANNOTATE_DOC_SOURCE_INCLUDES = \
	146	$(srcdir)/fdl.texi
	147	ANNOTATE_DOC_BUILD_INCLUDES = \
	148	gdb-cfg.texi
	149	ANNOTATE_DOC_FILES = \
	150	$(srcdir)/annotate.texinfo \
	151	$(ANNOTATE_DOC_SOURCE_INCLUDES) \
	152	$(ANNOTATE_DOC_BUILD_INCLUDES)
	153
c906108c SS	154	#### Host, target, and site specific Makefile fragments come in here.
	155	###
	156
35db0260	157	all:
c906108c	158
63ac3005	159	info: $(INFO_DEPS)
e6f672d2 AC	160	dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
e6f672d2 AC	161	ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
e5249f67	162	html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
9453113a	163	pdf: $(PDFFILES)
449f3b6c	164	all-doc: info dvi ps # pdf
3555de01	165	diststuff: info
c906108c	166
63ac3005	167	install-info: $(INFO_DEPS)
c938e9b0	168	$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
63ac3005 EZ	169	@list='$(INFO_DEPS)'; \
	170	for file in $$list; do \
	171	if test -f $$file; then d=.; else d=$(srcdir); fi; \
	172	for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	173	if test -f $$d/$$ifile; then \
c938e9b0 L	174	echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
c938e9b0 L	175	$(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
63ac3005 EZ	176	else : ; fi; \
	177	done; \
	178	done
c166cdc7	179	$(POST_INSTALL)
d3229ae3	180	@if $(SHELL) -c 'install-info --version \| sed 1q \| fgrep -s -v -i debian' >/dev/null 2>&1; then \
63ac3005	181	list='$(INFO_DEPS)'; \
d3229ae3	182	for file in $$list; do \
5843504f EZ	183	echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
5843504f EZ	184	install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file \|\| :;\
d3229ae3 EZ	185	done; \
d3229ae3 EZ	186	else : ; fi
c906108c	187
c166cdc7 EZ	188	uninstall-info:
	189	$(PRE_UNINSTALL)
	190	@if $(SHELL) -c 'install-info --version \| sed 1q \| fgrep -s -v -i debian' >/dev/null 2>&1; then \
	191	ii=yes; \
	192	else ii=; fi; \
	193	list='$(INFO_DEPS)'; \
	194	for file in $$list; do \
	195	test -z "$$ii" \
	196	\|\| install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	197	done
	198	$(NORMAL_UNINSTALL)
	199	list='$(INFO_DEPS)'; \
	200	for file in $$list; do \
	201	(cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	202	done
	203
085dd6e6 JM	204	install-html: html
085dd6e6 JM	205	for i in *.html ; do \
c938e9b0	206	$(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
085dd6e6 JM	207	done
085dd6e6 JM	208
9453113a DJ	209	pdf__strip_dir = `echo $$p \| sed -e 's\|^.*/\|\|'`;
	210
	211	install-pdf: $(PDFFILES)
	212	@$(NORMAL_INSTALL)
	213	test -z "$(pdfdir)" \|\| $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
	214	@list='$(PDFFILES)'; for p in $$list; do \
	215	if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	216	f=$(pdf__strip_dir) \
	217	echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	218	$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	219	done
	220
449f3b6c	221	STAGESTUFF = .info gdb-all.texi GDBvn.texi .ps .dvi *.pdf
c906108c SS	222
	223	# Copy the object files from a particular stage into a subdirectory.
	224	stage1: force
	225	-mkdir stage1
	226	-mv $(STAGESTUFF) stage1
	227
	228	stage2: force
	229	-mkdir stage2
	230	-mv $(STAGESTUFF) stage2
	231
	232	stage3: force
	233	-mkdir stage3
	234	-mv $(STAGESTUFF) stage3
	235
	236	against=stage2
	237
	238	comparison: force
	239	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
	240
	241	de-stage1: force
	242	-(cd stage1 ; mv -f * ..)
	243	-rmdir stage1
	244
	245	de-stage2: force
	246	-(cd stage2 ; mv -f * ..)
	247	-rmdir stage2
	248
	249	de-stage3: force
	250	-(cd stage3 ; mv -f * ..)
	251	-rmdir stage3
	252
c906108c SS	253	# GDB QUICK REFERENCE (dvi output)
c906108c SS	254	refcard.dvi : refcard.tex $(REFEDITS)
dfa249fb AC	255	echo > tmp.sed
	256	for f in x $(REFEDITS) ; do \
	257	test x$$f = xx && continue ; \
	258	cat $(srcdir)/$$f >>tmp.sed ; \
	259	done
	260	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
c906108c SS	261	$(SET_TEXINPUTS) $(TEX) sedref.tex
	262	mv sedref.dvi refcard.dvi
	263	rm -f sedref.log sedref.tex tmp.sed
	264
	265	refcard.ps : refcard.dvi
	266	$(DVIPS) -t landscape -o $@ $?
	267
9453113a DJ	268	refcard.pdf : refcard.tex $(REFEDITS)
	269	echo > tmp.sed
	270	for f in x $(REFEDITS) ; do \
	271	test x$$f = xx && continue ; \
	272	cat $(srcdir)/$$f >>tmp.sed ; \
	273	done
	274	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
	275	$(SET_TEXINPUTS) $(PDFTEX) sedref.tex
	276	mv sedref.pdf refcard.pdf
	277	rm -f sedref.log sedref.tex tmp.sed
	278
05a54c4f AC	279	# File to record current GDB version number (copied from main dir version.in)
05a54c4f AC	280	GDBvn.texi : ${gdbdir}/version.in
9ba8d803	281	echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
c906108c SS	282	mv GDBvn.new GDBvn.texi
	283
	284	# Updated atomically
	285	.PRECIOUS: GDBvn.texi
	286
	287	# Choose configuration for GDB manual (normally `all'; normally not tied into
	288	# `configure' script because most users prefer generic version of manual,
	289	# not one for their binary config---which may not be specifically
	290	# defined anyways).
	291	gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
44e2be90	292	(test "$(LN_S)" = "ln -s" && \
39ec5655	293	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) \|\| \
c906108c SS	294	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	295	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
	296
	297	# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
	298	# If your texinfo or makeinfo don't support these, get a new texinfo release
	299	#
	300	# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
	301	# Note that we can generate GDBvn.texi, but since we distribute one in the
	302	# source directory for the benefit of people who don't use this makefile,
	303	# VPATH will often tell make not to bother building it, because the one
	304	# in the srcdir is up to date. (if not, then make should build one here).
	305
46d8b1c3 AC	306	# Clean these up before each run. Avoids a catch 22 with not being
	307	# able to re-generate these files (to fix a corruption) because these
	308	# files contain a corruption.
b0787093 AC	309	GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
	310	gdb.tp* gdb.vr*
	311
c906108c	312	# GDB MANUAL: TeX dvi file
b0787093	313	gdb.dvi: ${GDB_DOC_FILES}
c906108c	314	if [ ! -f ./GDBvn.texi ]; then \
44e2be90	315	(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
c906108c SS	316	ln $(srcdir)/GDBvn.texi . \|\| \
c906108c SS	317	cp $(srcdir)/GDBvn.texi . ; else true; fi
b0787093	318	rm -f $(GDB_TEX_TMPS)
be298bcc	319	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
c906108c SS	320
	321	gdb.ps: gdb.dvi
	322	$(DVIPS) -o $@ $?
	323
b0787093	324	gdb.pdf: ${GDB_DOC_FILES}
449f3b6c	325	if [ ! -f ./GDBvn.texi ]; then \
44e2be90	326	(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
449f3b6c AC	327	ln $(srcdir)/GDBvn.texi . \|\| \
449f3b6c AC	328	cp $(srcdir)/GDBvn.texi . ; else true; fi
b0787093	329	rm -f $(GDB_TEX_TMPS)
be298bcc	330	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
449f3b6c	331
c906108c	332	# GDB MANUAL: info file
b0787093	333	gdb.info: ${GDB_DOC_FILES}
a7b40f07 AC	334	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
a7b40f07 AC	335	-o gdb.info $(srcdir)/gdb.texinfo
c906108c SS	336
	337	# GDB MANUAL: roff translations
	338	# Try to use a recent texi2roff. v2 was put on prep in jan91.
	339	# If you want an index, see texi2roff doc for postprocessing
	340	# and add -i to texi2roff invocations below.
	341	# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
	342	# corresponding -e lines when later texi2roff's are current)
	343	# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
	344	# + @c's deleted explicitly because texi2roff sees texinfo commands in them
	345	# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
	346	# + @alphaenumerate is ridiculously new, turned into @enumerate
	347
	348	# texi2roff doesn't have a notion of include dirs, so we have to fake
	349	# it out for gdb manual's include files---but only if not configured
	350	# in main sourcedir.
b0787093	351	links2roff: $(GDB_DOC_SOURCE_INCLUDES)
c906108c	352	if [ ! -f gdb.texinfo ]; then \
44e2be90	353	(test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) \|\| \
b0787093 AC	354	ln $(GDB_DOC_SOURCE_INCLUDES) . \|\| \
b0787093 AC	355	cp $(GDB_DOC_SOURCE_INCLUDES) . ; \
c906108c SS	356	fi
	357	touch links2roff
	358
c906108c	359	# gdb manual suitable for [gtn]roff -me
b0787093	360	gdb.me: $(GDB_DOC_FILES) links2roff
c906108c SS	361	sed -e '/\\input texinfo/d' \
	362	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	363	-e '/^@ifinfo/,/^@end ifinfo/d' \
	364	-e '/^@c /d' \
	365	-e 's/{.*,,/{/' \
	366	-e 's/@ / /g' \
	367	-e 's/^@alphaenumerate/@enumerate/g' \
	368	-e 's/^@end alphaenumerate/@end enumerate/g' \
	369	$(srcdir)/gdb.texinfo \| \
	370	$(TEXI2ROFF) -me \| \
	371	sed -e 's/---/\\(em/g' \
	372	>gdb.me
	373
	374	# gdb manual suitable for [gtn]roff -ms
b0787093	375	gdb.ms: $(GDB_DOC_FILES) links2roff
c906108c SS	376	sed -e '/\\input texinfo/d' \
	377	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	378	-e '/^@ifinfo/,/^@end ifinfo/d' \
	379	-e '/^@c /d' \
	380	-e 's/{.*,,/{/' \
	381	-e 's/@ / /g' \
	382	-e 's/^@alphaenumerate/@enumerate/g' \
	383	-e 's/^@end alphaenumerate/@end enumerate/g' \
	384	$(srcdir)/gdb.texinfo \| \
	385	$(TEXI2ROFF) -ms \| \
	386	sed -e 's/---/\\(em/g' \
	387	>gdb.ms
	388
	389	# gdb manual suitable for [tn]roff -mm
	390	# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
	391	# try leaving them in
b0787093	392	gdb.mm: $(GDB_DOC_FILES) links2roff
c906108c SS	393	sed -e '/\\input texinfo/d' \
	394	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	395	-e '/^@ifinfo/,/^@end ifinfo/d' \
	396	-e '/^@c /d' \
	397	-e 's/{.*,,/{/' \
	398	-e '/@noindent/d' \
	399	-e 's/@ / /g' \
	400	-e 's/^@alphaenumerate/@enumerate/g' \
	401	-e 's/^@end alphaenumerate/@end enumerate/g' \
	402	$(srcdir)/gdb.texinfo \| \
	403	$(TEXI2ROFF) -mm \| \
	404	sed -e 's/---/\\(em/g' \
	405	>gdb.mm
	406
085dd6e6 JM	407	# GDB MANUAL: HTML file
085dd6e6 JM	408
b0787093	409	gdb_toc.html: ${GDB_DOC_FILES}
7162c0ca	410	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
085dd6e6	411
46d8b1c3 AC	412	# Clean these up before each run. Avoids a catch 22 with not being
	413	# able to re-generate these files (to fix a corruption) because these
	414	# files contain a corruption.
b0787093 AC	415	GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
	416	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
	417
c906108c	418	# GDB INTERNALS MANUAL: TeX dvi file
b0787093 AC	419	gdbint.dvi: $(GDBINT_DOC_FILES)
b0787093 AC	420	rm -f $(GDBINT_TEX_TMPS)
be298bcc	421	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
c906108c SS	422
	423	gdbint.ps : gdbint.dvi
	424	$(DVIPS) -o $@ $?
	425
b0787093 AC	426	gdbint.pdf: $(GDBINT_DOC_FILES)
b0787093 AC	427	rm -f $(GDBINT_TEX_TMPS)
be298bcc	428	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
449f3b6c	429
c906108c SS	430	# GDB INTERNALS MANUAL: info file
c906108c SS	431
b0787093	432	gdbint.info: $(GDBINT_DOC_FILES)
aab4e0ec	433	$(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
c906108c	434
085dd6e6 JM	435	# GDB INTERNALS MANUAL: HTML file
085dd6e6 JM	436
b0787093	437	gdbint_toc.html: $(GDBINT_DOC_FILES)
085dd6e6 JM	438	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
085dd6e6 JM	439
b0787093	440	stabs.info: $(STABS_DOC_FILES)
e5249f67	441	$(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
c906108c	442
085dd6e6 JM	443	# STABS DOCUMENTATION: HTML file
085dd6e6 JM	444
b0787093	445	stabs_toc.html: $(STABS_DOC_FILES)
085dd6e6 JM	446	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
085dd6e6 JM	447
46d8b1c3 AC	448	# Clean these up before each run. Avoids a catch 22 with not being
	449	# able to re-generate these files (to fix a corruption) because these
	450	# files contain a corruption.
b0787093 AC	451	STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
	452	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
	453
c906108c	454	# STABS DOCUMENTATION: TeX dvi file
b0787093 AC	455	stabs.dvi : $(STABS_DOC_FILES)
b0787093 AC	456	rm -f $(STABS_TEX_TMPS)
be298bcc	457	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
c906108c SS	458
	459	stabs.ps: stabs.dvi
	460	$(DVIPS) -o $@ $?
	461
b0787093 AC	462	stabs.pdf: $(STABS_DOC_FILES)
b0787093 AC	463	rm -f $(STABS_TEX_TMPS)
be298bcc	464	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
449f3b6c	465
e6f672d2 AC	466	# Clean these up before each run. Avoids a catch 22 with not being
	467	# able to re-generate these files (to fix a corruption) because these
	468	# files contain a corruption.
	469	ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
	470	annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
	471
	472	# ANNOTATE DOCUMENTATION: TeX dvi file
	473	annotate.dvi : $(ANNOTATE_DOC_FILES)
	474	rm -f $(ANNOTATE_TEX_TMPS)
	475	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
	476
	477	annotate.ps: annotate.dvi
	478	$(DVIPS) -o $@ $?
	479
	480	annotate.pdf: $(ANNOTATE_DOC_FILES)
	481	rm -f $(ANNOTATE_TEX_TMPS)
	482	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
	483
	484	annotate.info: $(ANNOTATE_DOC_FILES)
	485	$(MAKEINFO) -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
	486
	487	annotate_toc.html: $(ANNOTATE_DOC_FILES)
	488	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
	489
c906108c SS	490	force:
c906108c SS	491
a4ce5b0d	492	Makefile: Makefile.in $(host_makefile_frag) config.status
c906108c	493	$(SHELL) ./config.status
46d8b1c3 AC	494
	495
	496	# The "least clean" level of cleaning. Get rid of files which are
	497	# automatically generated files that are just intermediate files,
	498
	499	mostlyclean:
	500	rm -f gdb.mm gdb.ms gdb.me links2roff
	501	rm -f $(GDB_TEX_TMPS)
	502	rm -f $(GDBINT_TEX_TMPS)
	503	rm -f $(STABS_TEX_TMPS)
e6f672d2	504	rm -f $(ANNOTATE_TEX_TMPS)
46d8b1c3 AC	505	rm -f sedref.dvi sedref.tex tmp.sed
	506
	507	clean: mostlyclean
	508	rm -f gdb-cfg.texi
	509
	510	distclean: clean
d7f4a264	511	rm -f Makefile config.status config.log
46d8b1c3 AC	512
	513	# GDBvn.texi, the dvi files, the info files, and the postscript files,
	514	# are all part of the distribution, so it should not be removed by
	515	# "clean" or "distclean". Use maintainer-clean to remove them.
	516
	517	maintainer-clean realclean: distclean
	518	rm -f GDBvn.texi .info .dvi .ps .html .pdf
	519
35db0260	520	install: install-info
c166cdc7 EZ	521
c166cdc7 EZ	522	uninstall: uninstall-info