[deliverable/binutils-gdb.git] / gdb / doc / Makefile.in

##Copyright (C) 1991, 1992 Free Software Foundation, Inc.

# Makefile for GDB documentation.
# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

srcdir = .

prefix = /usr/local

infodir = $(prefix)/info

SHELL = /bin/sh

INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)

# main GDB source directory
gdbdir = $(srcdir)/..

# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo

# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo

# where to find texi2roff, ditto
TEXI2ROFF=texi2roff

# Where is the source dir for the READLINE library doc?  
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc

SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS

# There may be alternate predefined collections of switches to configure
# the GDB manual.  Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all

# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
#    - Computer Modern (CM) fonts
#    - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
#  a4rc.sed     use A4 paper (297 x 210 mm)
#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
#      for A4, CM fonts:    REFEDITS = a4rc.sed
#      for US, PS fonts:    REFEDITS = psrc.sed
#      for default:
REFEDITS =

# Don Knuth's TeX formatter
TEX = tex

# auxiliary program for sorting Texinfo indices
TEXINDEX = texindex

# Main GDB manual's source files
SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi

SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)

SFILES_DOC = $(SFILES_LOCAL) \
                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi

#### Host, target, and site specific Makefile fragments come in here.
###

all install:

info: gdb.info gdbint.info stabs.info
dvi: gdb.dvi refcard.dvi gdbint.dvi
all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi

install-info: info
	for i in *.info* ; do \
		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
	done

STAGESTUFF = *.info* gdb-all.texi GDBvn.texi

# Copy the object files from a particular stage into a subdirectory.
stage1: force
	-mkdir stage1
	-mv $(STAGESTUFF) stage1

stage2: force
	-mkdir stage2
	-mv $(STAGESTUFF) stage2

stage3: force
	-mkdir stage3
	-mv $(STAGESTUFF) stage3

against=stage2

comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

de-stage1: force
	-(cd stage1 ; mv -f * ..)
	-rmdir stage1

de-stage2: force
	-(cd stage2 ; mv -f * ..)
	-rmdir stage2

de-stage3: force
	-(cd stage3 ; mv -f * ..)
	-rmdir stage3

clean-info:
	rm -f gdb.info* gdbint.info* stabs.info*

clean-dvi:
	rm -f gdb.dvi gdbint.dvi stabs.dvi sedref.dvi

mostlyclean: clean-info clean-dvi
	rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
	rm -f links2roff
	rm -f refcard.ps lrefcard.ps refcard.log sedref.* *~
	rm -f gdbint.?? gdbint.??? stabs.?? stabs.???

clean: mostlyclean
	rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi

distclean: clean
	rm -f Makefile config.status

# GDBvn.texi and refcard.dvi are distributed, so they should not be
# removed by "clean" or "distclean".
realclean: distclean clean-dvi clean-info
	rm -f GDBvn.texi refcard.dvi

# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
	if [ -z "$(REFEDITS)" ]; then \
		cp $(srcdir)/refcard.tex sedref.tex ; \
	else \
		echo > tmp.sed ; \
		for f in "$(REFEDITS)" ; do \
			cat $(srcdir)/$$f >>tmp.sed ; done ; \
		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	fi
	$(SET_TEXINPUTS) $(TEX) sedref.tex
	mv sedref.dvi refcard.dvi
	rm -f sedref.log sedref.tex tmp.sed

refcard.ps : refcard.dvi
	dvips -t landscape refcard.dvi -o

# File to record current GDB version number (copied from main dir Makefile.in)
GDBvn.texi : ${gdbdir}/Makefile.in
	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new
	mv GDBvn.new GDBvn.texi

# Updated atomically
.PRECIOUS: GDBvn.texi

# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
#   source directory for the benefit of people who *don't* use this makefile,
#   VPATH will often tell make not to bother building it, because the one
#   in the srcdir is up to date.  (if not, then make should build one here).

# GDB MANUAL: TeX dvi file
gdb.dvi: ${SFILES_DOC}
	if [ ! -f ./GDBvn.texi ]; then \
		ln -s $(srcdir)/GDBvn.texi . || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(TEXINDEX) gdb.??
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s

# GDB MANUAL: info file
# We're using texinfo2, and older makeinfo's may not be able to
# cope with all the markup.  
gdb.info: ${SFILES_DOC}
	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo

# GDB MANUAL: roff translations
# Try to use a recent texi2roff.  v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing 
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
#    corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate

# texi2roff doesn't have a notion of include dirs, so we have to fake 
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(SFILES_INCLUDED)
	if [ ! -f gdb.texinfo ]; then \
		ln -s $(SFILES_INCLUDED) . || \
		ln $(SFILES_INCLUDED)    . || \
		cp $(SFILES_INCLUDED)    . ; \
	fi
	touch links2roff

#  "Readline" appendices.  Get them also due to lack of includes, 
# regardless of whether or not configuring in main sourcedir.
# @ftable removed due to bug in texi2roff-2; if your texi2roff
# is newer, try just ln or cp
rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
		sed -e 's/^@ftable/@table/g' \
		-e 's/^@end ftable/@end table/g' \
		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo

inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
	ln -s ${READLINE_DIR}/inc-hist.texi . || \
	ln ${READLINE_DIR}/inc-hist.texi . || \
	cp ${READLINE_DIR}/inc-hist.texi .

# gdb manual suitable for [gtn]roff -me
gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -me | \
	sed -e 's/---/\\(em/g' \
	>gdb.me 

# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -ms | \
	sed -e 's/---/\\(em/g' \
	>gdb.ms 

# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
#   try leaving them in
gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e '/@noindent/d' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -mm | \
	sed -e 's/---/\\(em/g' \
	>gdb.mm 

# start-sanitize-gdbtk
# GDB GUI MANUAL: TeX dvi file
gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	$(TEXINDEX) gdbgui.??
	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	rm -f gdbgui.?? gdbgui.aux gdbgui.cps gdbgui.fns gdbgui.kys \
		gdbgui.log gdbgui.pgs gdbgui.toc gdbgui.tps gdbgui.vrs

# GDB GUI MANUAL: info file
gdb-gui: gdbgui.info

gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
	$(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
# end-sanitize-gdbtk

# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	$(TEXINDEX) gdbint.??
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
		gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs

# GDB INTERNALS MANUAL: info file
gdb-internals: gdbint.info

gdbint.info: gdbint.texinfo
	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo

stabs.info: stabs.texinfo
	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo

# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : stabs.texinfo
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	$(TEXINDEX) stabs.??
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
		stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs

stabs.ps: stabs.dvi
	dvips -o stabs.ps stabs

force:

Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
	$(SHELL) ./config.status
Commit	Line	Data
787c6bfe	1	##Copyright (C) 1991, 1992 Free Software Foundation, Inc.
1eb988b9 RP	2
	3	# Makefile for GDB documentation.
	4	# This file is part of GDB.
	5
	6	# This program is free software; you can redistribute it and/or modify
	7	# it under the terms of the GNU General Public License as published by
	8	# the Free Software Foundation; either version 2 of the License, or
	9	# (at your option) any later version.
	10	#
	11	# This program is distributed in the hope that it will be useful,
	12	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	# GNU General Public License for more details.
	15	#
	16	# You should have received a copy of the GNU General Public License
	17	# along with this program; if not, write to the Free Software
	18	# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	19
dc341d8b RP	20	srcdir = .
dc341d8b RP	21
570e1733 RP	22	prefix = /usr/local
570e1733 RP	23
787c6bfe	24	infodir = $(prefix)/info
dc341d8b RP	25
	26	SHELL = /bin/sh
	27
570e1733 RP	28	INSTALL = install -c
	29	INSTALL_PROGRAM = $(INSTALL)
	30	INSTALL_DATA = $(INSTALL)
	31
1eb988b9	32	# main GDB source directory
18fae2a8	33	gdbdir = $(srcdir)/..
1eb988b9 RP	34
1eb988b9 RP	35	# where to find texinfo; GDB dist should include a recent one
18fae2a8	36	TEXIDIR=${gdbdir}/../texinfo
1eb988b9 RP	37
	38	# where to find makeinfo, preferably one designed for texinfo-2
	39	MAKEINFO=makeinfo
	40
92b73793 RP	41	# where to find texi2roff, ditto
	42	TEXI2ROFF=texi2roff
	43
18fae2a8 RP	44	# Where is the source dir for the READLINE library doc?
	45	# Traditionally readline is in .. or .
	46	READLINE_DIR = ${gdbdir}/../readline/doc
	47
	48	SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
	49
2685ead7 RP	50	# There may be alternate predefined collections of switches to configure
	51	# the GDB manual. Normally this is not done in synch with the software
	52	# config system, since this choice tends to be independent; most people
	53	# want a doc config of `all' for a generic manual, regardless of sw config.
1d7c3357 RP	54	DOC_CONFIG = all
1d7c3357 RP	55
2685ead7 RP	56	# This list of sed edits will edit the GDB reference card
	57	# for what fonts and what papersize to use.
	58	# By default (NO edits applied), the refcard uses:
	59	# - Computer Modern (CM) fonts
	60	# - US letter paper (8.5x11in)
	61	# List some of the following files for alternative fonts and paper:
	62	# a4rc.sed use A4 paper (297 x 210 mm)
	63	# psrc.sed use PostScript fonts (Karl Berry short TeX names)
	64	# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
	65	# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
	66	# for A4, CM fonts: REFEDITS = a4rc.sed
	67	# for US, PS fonts: REFEDITS = psrc.sed
	68	# for default:
	69	REFEDITS =
	70
18fae2a8 RP	71	# Don Knuth's TeX formatter
	72	TEX = tex
	73
	74	# auxiliary program for sorting Texinfo indices
	75	TEXINDEX = texindex
1eb988b9 RP	76
1eb988b9 RP	77	# Main GDB manual's source files
4af6d502	78	SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
18fae2a8 RP	79
18fae2a8 RP	80	SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
1eb988b9	81
18fae2a8 RP	82	SFILES_DOC = $(SFILES_LOCAL) \
18fae2a8 RP	83	$(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
92b73793	84
4f98572e RP	85	#### Host, target, and site specific Makefile fragments come in here.
	86	###
	87
e92ee469 RP	88	all install:
e92ee469 RP	89
612dbd4c	90	info: gdb.info gdbint.info stabs.info
6a962504	91	dvi: gdb.dvi refcard.dvi gdbint.dvi
1041a570	92	all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
dc341d8b	93
570e1733	94	install-info: info
dc341d8b	95	for i in .info ; do \
570e1733	96	$(INSTALL_DATA) $$i $(infodir)/$$i ; \
dc341d8b	97	done
1eb988b9	98
18fae2a8	99	STAGESTUFF = .info gdb-all.texi GDBvn.texi
332523bf RP	100
	101	# Copy the object files from a particular stage into a subdirectory.
	102	stage1: force
	103	-mkdir stage1
	104	-mv $(STAGESTUFF) stage1
	105
	106	stage2: force
	107	-mkdir stage2
	108	-mv $(STAGESTUFF) stage2
	109
	110	stage3: force
	111	-mkdir stage3
	112	-mv $(STAGESTUFF) stage3
	113
	114	against=stage2
	115
	116	comparison: force
	117	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
	118
	119	de-stage1: force
570e1733 RP	120	-(cd stage1 ; mv -f * ..)
570e1733 RP	121	-rmdir stage1
332523bf RP	122
332523bf RP	123	de-stage2: force
570e1733 RP	124	-(cd stage2 ; mv -f * ..)
570e1733 RP	125	-rmdir stage2
332523bf RP	126
332523bf RP	127	de-stage3: force
570e1733 RP	128	-(cd stage3 ; mv -f * ..)
570e1733 RP	129	-rmdir stage3
332523bf	130
18fae2a8 RP	131	clean-info:
	132	rm -f gdb.info* gdbint.info* stabs.info*
	133
	134	clean-dvi:
023b6394 JK	135	rm -f gdb.dvi gdbint.dvi stabs.dvi sedref.dvi
023b6394 JK	136
18fae2a8 RP	137	mostlyclean: clean-info clean-dvi
	138	rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
	139	rm -f links2roff
2685ead7	140	rm -f refcard.ps lrefcard.ps refcard.log sedref.* *~
18fae2a8 RP	141	rm -f gdbint.?? gdbint.??? stabs.?? stabs.???
	142
	143	clean: mostlyclean
5d955237	144	rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi
18fae2a8 RP	145
	146	distclean: clean
	147	rm -f Makefile config.status
	148
023b6394 JK	149	# GDBvn.texi and refcard.dvi are distributed, so they should not be
023b6394 JK	150	# removed by "clean" or "distclean".
b397d5b8	151	realclean: distclean clean-dvi clean-info
023b6394	152	rm -f GDBvn.texi refcard.dvi
18fae2a8	153
2685ead7 RP	154	# GDB QUICK REFERENCE (dvi output)
	155	refcard.dvi : refcard.tex $(REFEDITS)
	156	if [ -z "$(REFEDITS)" ]; then \
b9b9f55a	157	cp $(srcdir)/refcard.tex sedref.tex ; \
2685ead7 RP	158	else \
	159	echo > tmp.sed ; \
	160	for f in "$(REFEDITS)" ; do \
	161	cat $(srcdir)/$$f >>tmp.sed ; done ; \
	162	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	163	fi
	164	$(SET_TEXINPUTS) $(TEX) sedref.tex
	165	mv sedref.dvi refcard.dvi
	166	rm -f sedref.log sedref.tex tmp.sed
	167
	168	refcard.ps : refcard.dvi
	169	dvips -t landscape refcard.dvi -o
1eb988b9	170
1eb988b9	171	# File to record current GDB version number (copied from main dir Makefile.in)
18fae2a8	172	GDBvn.texi : ${gdbdir}/Makefile.in
af08a43a JK	173	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new
	174	mv GDBvn.new GDBvn.texi
	175
	176	# Updated atomically
	177	.PRECIOUS: GDBvn.texi
18fae2a8	178
1d7c3357 RP	179	# Choose configuration for GDB manual (normally `all'; normally not tied into
	180	# `configure' script because most users prefer generic version of manual,
	181	# not one for their binary config---which may not be specifically
	182	# defined anyways).
c15024ee JK	183	gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	184	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	185	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	186	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
1d7c3357	187
18fae2a8 RP	188	# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
	189	# If your texinfo or makeinfo don't support these, get a new texinfo release
	190	#
	191	# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
	192	# Note that we can generate GDBvn.texi, but since we distribute one in the
cacf5942 RP	193	# source directory for the benefit of people who don't use this makefile,
	194	# VPATH will often tell make not to bother building it, because the one
	195	# in the srcdir is up to date. (if not, then make should build one here).
787c6bfe	196
1eb988b9	197	# GDB MANUAL: TeX dvi file
18fae2a8 RP	198	gdb.dvi: ${SFILES_DOC}
	199	if [ ! -f ./GDBvn.texi ]; then \
	200	ln -s $(srcdir)/GDBvn.texi . \|\| \
	201	ln $(srcdir)/GDBvn.texi . \|\| \
	202	cp $(srcdir)/GDBvn.texi . ; else true; fi
	203	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	204	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	205	$(TEXINDEX) gdb.??
	206	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	207	rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s
1eb988b9 RP	208
	209	# GDB MANUAL: info file
	210	# We're using texinfo2, and older makeinfo's may not be able to
18fae2a8 RP	211	# cope with all the markup.
	212	gdb.info: ${SFILES_DOC}
	213	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
92b73793 RP	214
	215	# GDB MANUAL: roff translations
	216	# Try to use a recent texi2roff. v2 was put on prep in jan91.
	217	# If you want an index, see texi2roff doc for postprocessing
	218	# and add -i to texi2roff invocations below.
	219	# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
cacf5942	220	# corresponding -e lines when later texi2roff's are current)
92b73793 RP	221	# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
	222	# + @c's deleted explicitly because texi2roff sees texinfo commands in them
	223	# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
	224	# + @alphaenumerate is ridiculously new, turned into @enumerate
	225
18fae2a8 RP	226	# texi2roff doesn't have a notion of include dirs, so we have to fake
	227	# it out for gdb manual's include files---but only if not configured
	228	# in main sourcedir.
	229	links2roff: $(SFILES_INCLUDED)
1d7c3357	230	if [ ! -f gdb.texinfo ]; then \
18fae2a8 RP	231	ln -s $(SFILES_INCLUDED) . \|\| \
	232	ln $(SFILES_INCLUDED) . \|\| \
	233	cp $(SFILES_INCLUDED) . ; \
	234	fi
	235	touch links2roff
	236
	237	# "Readline" appendices. Get them also due to lack of includes,
	238	# regardless of whether or not configuring in main sourcedir.
	239	# @ftable removed due to bug in texi2roff-2; if your texi2roff
	240	# is newer, try just ln or cp
	241	rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
	242	sed -e 's/^@ftable/@table/g' \
5f92dab8	243	-e 's/^@end ftable/@end table/g' \
18fae2a8 RP	244	${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
	245
	246	inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
	247	ln -s ${READLINE_DIR}/inc-hist.texi . \|\| \
	248	ln ${READLINE_DIR}/inc-hist.texi . \|\| \
	249	cp ${READLINE_DIR}/inc-hist.texi .
	250
	251	# gdb manual suitable for [gtn]roff -me
	252	gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	253	sed -e '/\\input texinfo/d' \
	254	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	255	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	256	-e '/^@c /d' \
92b73793	257	-e 's/{.*,,/{/' \
92b73793 RP	258	-e 's/@ / /g' \
	259	-e 's/^@alphaenumerate/@enumerate/g' \
	260	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	261	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	262	$(TEXI2ROFF) -me \| \
92b73793	263	sed -e 's/---/\\(em/g' \
18fae2a8	264	>gdb.me
92b73793	265
18fae2a8 RP	266	# gdb manual suitable for [gtn]roff -ms
18fae2a8 RP	267	gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	268	sed -e '/\\input texinfo/d' \
	269	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	270	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	271	-e '/^@c /d' \
92b73793 RP	272	-e 's/{.*,,/{/' \
	273	-e 's/@ / /g' \
	274	-e 's/^@alphaenumerate/@enumerate/g' \
	275	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	276	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	277	$(TEXI2ROFF) -ms \| \
92b73793	278	sed -e 's/---/\\(em/g' \
18fae2a8	279	>gdb.ms
92b73793	280
18fae2a8 RP	281	# gdb manual suitable for [tn]roff -mm
	282	# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
	283	# try leaving them in
	284	gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	285	sed -e '/\\input texinfo/d' \
	286	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	287	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	288	-e '/^@c /d' \
92b73793	289	-e 's/{.*,,/{/' \
18fae2a8	290	-e '/@noindent/d' \
92b73793 RP	291	-e 's/@ / /g' \
	292	-e 's/^@alphaenumerate/@enumerate/g' \
	293	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	294	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	295	$(TEXI2ROFF) -mm \| \
92b73793	296	sed -e 's/---/\\(em/g' \
18fae2a8	297	>gdb.mm
1eb988b9	298
22cb0aa7 SS	299	# start-sanitize-gdbtk
	300	# GDB GUI MANUAL: TeX dvi file
	301	gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
	302	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	303	$(TEXINDEX) gdbgui.??
	304	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	305	rm -f gdbgui.?? gdbgui.aux gdbgui.cps gdbgui.fns gdbgui.kys \
	306	gdbgui.log gdbgui.pgs gdbgui.toc gdbgui.tps gdbgui.vrs
	307
	308	# GDB GUI MANUAL: info file
	309	gdb-gui: gdbgui.info
	310
	311	gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
	312	$(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
	313	# end-sanitize-gdbtk
	314
1eb988b9 RP	315	# GDB INTERNALS MANUAL: TeX dvi file
1eb988b9 RP	316	gdbint.dvi : gdbint.texinfo
18fae2a8 RP	317	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	318	$(TEXINDEX) gdbint.??
	319	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
1eb988b9 RP	320	rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
	321	gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs
	322
	323	# GDB INTERNALS MANUAL: info file
dc341d8b	324	gdb-internals: gdbint.info
1eb988b9	325
dc341d8b RP	326	gdbint.info: gdbint.texinfo
dc341d8b RP	327	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
1eb988b9	328
e505224d PB	329	stabs.info: stabs.texinfo
	330	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
	331
612dbd4c JG	332	# STABS DOCUMENTATION: TeX dvi file
612dbd4c JG	333	stabs.dvi : stabs.texinfo
18fae2a8 RP	334	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	335	$(TEXINDEX) stabs.??
	336	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
612dbd4c JG	337	rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
	338	stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs
	339
	340	stabs.ps: stabs.dvi
	341	dvips -o stabs.ps stabs
	342
dc341d8b	343	force:
1eb988b9	344
dc341d8b RP	345	Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
dc341d8b RP	346	$(SHELL) ./config.status