Commit | Line | Data |
---|---|---|
c906108c SS |
1 | /* Remote debugging interface for MIPS remote debugging protocol. |
2 | Copyright 1993, 1994, 1995 Free Software Foundation, Inc. | |
3 | Contributed by Cygnus Support. Written by Ian Lance Taylor | |
4 | <ian@cygnus.com>. | |
5 | ||
c5aa993b | 6 | This file is part of GDB. |
c906108c | 7 | |
c5aa993b JM |
8 | This program is free software; you can redistribute it and/or modify |
9 | it under the terms of the GNU General Public License as published by | |
10 | the Free Software Foundation; either version 2 of the License, or | |
11 | (at your option) any later version. | |
c906108c | 12 | |
c5aa993b JM |
13 | This program is distributed in the hope that it will be useful, |
14 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | GNU General Public License for more details. | |
c906108c | 17 | |
c5aa993b JM |
18 | You should have received a copy of the GNU General Public License |
19 | along with this program; if not, write to the Free Software | |
20 | Foundation, Inc., 59 Temple Place - Suite 330, | |
21 | Boston, MA 02111-1307, USA. */ | |
c906108c SS |
22 | |
23 | #include "defs.h" | |
24 | #include "inferior.h" | |
25 | #include "bfd.h" | |
26 | #include "symfile.h" | |
27 | #include "wait.h" | |
28 | #include "gdbcmd.h" | |
29 | #include "gdbcore.h" | |
30 | #include "serial.h" | |
31 | #include "target.h" | |
32 | #include "remote-utils.h" | |
33 | #include "gdb_string.h" | |
34 | ||
35 | #include <signal.h> | |
36 | #include <sys/types.h> | |
37 | #include <sys/stat.h> | |
c906108c SS |
38 | |
39 | /* Microsoft C's stat.h doesn't define all the POSIX file modes. */ | |
40 | #ifndef S_IROTH | |
41 | #define S_IROTH S_IREAD | |
42 | #endif | |
43 | ||
c906108c | 44 | \f |
c5aa993b | 45 | |
c906108c SS |
46 | /* Breakpoint types. Values 0, 1, and 2 must agree with the watch |
47 | types passed by breakpoint.c to target_insert_watchpoint. | |
48 | Value 3 is our own invention, and is used for ordinary instruction | |
49 | breakpoints. Value 4 is used to mark an unused watchpoint in tables. */ | |
c5aa993b JM |
50 | enum break_type |
51 | { | |
52 | BREAK_WRITE, /* 0 */ | |
53 | BREAK_READ, /* 1 */ | |
54 | BREAK_ACCESS, /* 2 */ | |
55 | BREAK_FETCH, /* 3 */ | |
56 | BREAK_UNUSED /* 4 */ | |
57 | }; | |
c906108c SS |
58 | |
59 | /* Prototypes for local functions. */ | |
60 | ||
61 | static int mips_readchar PARAMS ((int timeout)); | |
62 | ||
63 | static int mips_receive_header PARAMS ((unsigned char *hdr, int *pgarbage, | |
64 | int ch, int timeout)); | |
65 | ||
66 | static int mips_receive_trailer PARAMS ((unsigned char *trlr, int *pgarbage, | |
67 | int *pch, int timeout)); | |
68 | ||
69 | static int mips_cksum PARAMS ((const unsigned char *hdr, | |
70 | const unsigned char *data, | |
71 | int len)); | |
72 | ||
73 | static void mips_send_packet PARAMS ((const char *s, int get_ack)); | |
74 | ||
75 | static void mips_send_command PARAMS ((const char *cmd, int prompt)); | |
76 | ||
77 | static int mips_receive_packet PARAMS ((char *buff, int throw_error, | |
78 | int timeout)); | |
79 | ||
80 | static CORE_ADDR mips_request PARAMS ((int cmd, CORE_ADDR addr, | |
c5aa993b JM |
81 | CORE_ADDR data, int *perr, int timeout, |
82 | char *buff)); | |
c906108c SS |
83 | |
84 | static void mips_initialize PARAMS ((void)); | |
85 | ||
86 | static void mips_open PARAMS ((char *name, int from_tty)); | |
87 | ||
88 | static void pmon_open PARAMS ((char *name, int from_tty)); | |
89 | ||
90 | static void ddb_open PARAMS ((char *name, int from_tty)); | |
91 | ||
92 | static void lsi_open PARAMS ((char *name, int from_tty)); | |
93 | ||
94 | static void mips_close PARAMS ((int quitting)); | |
95 | ||
96 | static void mips_detach PARAMS ((char *args, int from_tty)); | |
97 | ||
98 | static void mips_resume PARAMS ((int pid, int step, | |
99 | enum target_signal siggnal)); | |
100 | ||
c5aa993b | 101 | static int mips_wait PARAMS ((int pid, struct target_waitstatus * status)); |
c906108c SS |
102 | |
103 | static int mips_map_regno PARAMS ((int regno)); | |
104 | ||
105 | static void mips_fetch_registers PARAMS ((int regno)); | |
106 | ||
107 | static void mips_prepare_to_store PARAMS ((void)); | |
108 | ||
109 | static void mips_store_registers PARAMS ((int regno)); | |
110 | ||
111 | static unsigned int mips_fetch_word PARAMS ((CORE_ADDR addr)); | |
112 | ||
113 | static int mips_store_word PARAMS ((CORE_ADDR addr, unsigned int value, | |
114 | char *old_contents)); | |
115 | ||
116 | static int mips_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, | |
c5aa993b | 117 | int write, struct target_ops * ignore)); |
c906108c | 118 | |
c5aa993b | 119 | static void mips_files_info PARAMS ((struct target_ops * ignore)); |
c906108c SS |
120 | |
121 | static void mips_create_inferior PARAMS ((char *execfile, char *args, | |
122 | char **env)); | |
123 | ||
124 | static void mips_mourn_inferior PARAMS ((void)); | |
125 | ||
126 | static int pmon_makeb64 PARAMS ((unsigned long v, char *p, int n, int *chksum)); | |
127 | ||
128 | static int pmon_zeroset PARAMS ((int recsize, char **buff, int *amount, | |
c5aa993b | 129 | unsigned int *chksum)); |
c906108c SS |
130 | |
131 | static int pmon_checkset PARAMS ((int recsize, char **buff, int *value)); | |
132 | ||
133 | static void pmon_make_fastrec PARAMS ((char **outbuf, unsigned char *inbuf, | |
c5aa993b JM |
134 | int *inptr, int inamount, int *recsize, |
135 | unsigned int *csum, unsigned int *zerofill)); | |
c906108c SS |
136 | |
137 | static int pmon_check_ack PARAMS ((char *mesg)); | |
138 | ||
139 | static void pmon_start_download PARAMS ((void)); | |
140 | ||
141 | static void pmon_end_download PARAMS ((int final, int bintotal)); | |
142 | ||
143 | static void pmon_download PARAMS ((char *buffer, int length)); | |
144 | ||
145 | static void pmon_load_fast PARAMS ((char *file)); | |
146 | ||
147 | static void mips_load PARAMS ((char *file, int from_tty)); | |
148 | ||
149 | static int mips_make_srec PARAMS ((char *buffer, int type, CORE_ADDR memaddr, | |
150 | unsigned char *myaddr, int len)); | |
151 | ||
152 | static int set_breakpoint PARAMS ((CORE_ADDR addr, int len, | |
153 | enum break_type type)); | |
154 | ||
155 | static int clear_breakpoint PARAMS ((CORE_ADDR addr, int len, | |
156 | enum break_type type)); | |
157 | ||
158 | static int common_breakpoint PARAMS ((int set, CORE_ADDR addr, int len, | |
159 | enum break_type type)); | |
160 | ||
161 | /* Forward declarations. */ | |
162 | extern struct target_ops mips_ops; | |
163 | extern struct target_ops pmon_ops; | |
164 | extern struct target_ops ddb_ops; | |
c5aa993b | 165 | \f/* *INDENT-OFF* */ |
c906108c SS |
166 | /* The MIPS remote debugging interface is built on top of a simple |
167 | packet protocol. Each packet is organized as follows: | |
168 | ||
c5aa993b JM |
169 | SYN The first character is always a SYN (ASCII 026, or ^V). SYN |
170 | may not appear anywhere else in the packet. Any time a SYN is | |
171 | seen, a new packet should be assumed to have begun. | |
c906108c SS |
172 | |
173 | TYPE_LEN | |
c5aa993b JM |
174 | This byte contains the upper five bits of the logical length |
175 | of the data section, plus a single bit indicating whether this | |
176 | is a data packet or an acknowledgement. The documentation | |
177 | indicates that this bit is 1 for a data packet, but the actual | |
178 | board uses 1 for an acknowledgement. The value of the byte is | |
179 | 0x40 + (ack ? 0x20 : 0) + (len >> 6) | |
180 | (we always have 0 <= len < 1024). Acknowledgement packets do | |
181 | not carry data, and must have a data length of 0. | |
c906108c SS |
182 | |
183 | LEN1 This byte contains the lower six bits of the logical length of | |
c5aa993b JM |
184 | the data section. The value is |
185 | 0x40 + (len & 0x3f) | |
186 | ||
187 | SEQ This byte contains the six bit sequence number of the packet. | |
188 | The value is | |
189 | 0x40 + seq | |
190 | An acknowlegment packet contains the sequence number of the | |
191 | packet being acknowledged plus 1 modulo 64. Data packets are | |
192 | transmitted in sequence. There may only be one outstanding | |
193 | unacknowledged data packet at a time. The sequence numbers | |
194 | are independent in each direction. If an acknowledgement for | |
195 | the previous packet is received (i.e., an acknowledgement with | |
196 | the sequence number of the packet just sent) the packet just | |
197 | sent should be retransmitted. If no acknowledgement is | |
198 | received within a timeout period, the packet should be | |
199 | retransmitted. This has an unfortunate failure condition on a | |
200 | high-latency line, as a delayed acknowledgement may lead to an | |
201 | endless series of duplicate packets. | |
202 | ||
203 | DATA The actual data bytes follow. The following characters are | |
204 | escaped inline with DLE (ASCII 020, or ^P): | |
205 | SYN (026) DLE S | |
206 | DLE (020) DLE D | |
207 | ^C (003) DLE C | |
208 | ^S (023) DLE s | |
209 | ^Q (021) DLE q | |
210 | The additional DLE characters are not counted in the logical | |
211 | length stored in the TYPE_LEN and LEN1 bytes. | |
c906108c SS |
212 | |
213 | CSUM1 | |
214 | CSUM2 | |
215 | CSUM3 | |
c5aa993b JM |
216 | These bytes contain an 18 bit checksum of the complete |
217 | contents of the packet excluding the SEQ byte and the | |
218 | CSUM[123] bytes. The checksum is simply the twos complement | |
219 | addition of all the bytes treated as unsigned characters. The | |
220 | values of the checksum bytes are: | |
221 | CSUM1: 0x40 + ((cksum >> 12) & 0x3f) | |
222 | CSUM2: 0x40 + ((cksum >> 6) & 0x3f) | |
223 | CSUM3: 0x40 + (cksum & 0x3f) | |
c906108c SS |
224 | |
225 | It happens that the MIPS remote debugging protocol always | |
226 | communicates with ASCII strings. Because of this, this | |
227 | implementation doesn't bother to handle the DLE quoting mechanism, | |
228 | since it will never be required. */ | |
9846de1b | 229 | /* *INDENT-ON* */ |
c906108c | 230 | |
c5aa993b | 231 | |
c906108c SS |
232 | /* The SYN character which starts each packet. */ |
233 | #define SYN '\026' | |
234 | ||
235 | /* The 0x40 used to offset each packet (this value ensures that all of | |
236 | the header and trailer bytes, other than SYN, are printable ASCII | |
237 | characters). */ | |
238 | #define HDR_OFFSET 0x40 | |
239 | ||
240 | /* The indices of the bytes in the packet header. */ | |
241 | #define HDR_INDX_SYN 0 | |
242 | #define HDR_INDX_TYPE_LEN 1 | |
243 | #define HDR_INDX_LEN1 2 | |
244 | #define HDR_INDX_SEQ 3 | |
245 | #define HDR_LENGTH 4 | |
246 | ||
247 | /* The data/ack bit in the TYPE_LEN header byte. */ | |
248 | #define TYPE_LEN_DA_BIT 0x20 | |
249 | #define TYPE_LEN_DATA 0 | |
250 | #define TYPE_LEN_ACK TYPE_LEN_DA_BIT | |
251 | ||
252 | /* How to compute the header bytes. */ | |
253 | #define HDR_SET_SYN(data, len, seq) (SYN) | |
254 | #define HDR_SET_TYPE_LEN(data, len, seq) \ | |
255 | (HDR_OFFSET \ | |
256 | + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \ | |
257 | + (((len) >> 6) & 0x1f)) | |
258 | #define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f)) | |
259 | #define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq)) | |
260 | ||
261 | /* Check that a header byte is reasonable. */ | |
262 | #define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET) | |
263 | ||
264 | /* Get data from the header. These macros evaluate their argument | |
265 | multiple times. */ | |
266 | #define HDR_IS_DATA(hdr) \ | |
267 | (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA) | |
268 | #define HDR_GET_LEN(hdr) \ | |
269 | ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f))) | |
270 | #define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f) | |
271 | ||
272 | /* The maximum data length. */ | |
273 | #define DATA_MAXLEN 1023 | |
274 | ||
275 | /* The trailer offset. */ | |
276 | #define TRLR_OFFSET HDR_OFFSET | |
277 | ||
278 | /* The indices of the bytes in the packet trailer. */ | |
279 | #define TRLR_INDX_CSUM1 0 | |
280 | #define TRLR_INDX_CSUM2 1 | |
281 | #define TRLR_INDX_CSUM3 2 | |
282 | #define TRLR_LENGTH 3 | |
283 | ||
284 | /* How to compute the trailer bytes. */ | |
285 | #define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f)) | |
286 | #define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >> 6) & 0x3f)) | |
287 | #define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum) ) & 0x3f)) | |
288 | ||
289 | /* Check that a trailer byte is reasonable. */ | |
290 | #define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET) | |
291 | ||
292 | /* Get data from the trailer. This evaluates its argument multiple | |
293 | times. */ | |
294 | #define TRLR_GET_CKSUM(trlr) \ | |
295 | ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \ | |
296 | + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) << 6) \ | |
297 | + ((trlr)[TRLR_INDX_CSUM3] & 0x3f)) | |
298 | ||
299 | /* The sequence number modulos. */ | |
300 | #define SEQ_MODULOS (64) | |
301 | ||
302 | /* PMON commands to load from the serial port or UDP socket. */ | |
303 | #define LOAD_CMD "load -b -s tty0\r" | |
304 | #define LOAD_CMD_UDP "load -b -s udp\r" | |
305 | ||
306 | /* The target vectors for the four different remote MIPS targets. | |
307 | These are initialized with code in _initialize_remote_mips instead | |
308 | of static initializers, to make it easier to extend the target_ops | |
309 | vector later. */ | |
310 | struct target_ops mips_ops, pmon_ops, ddb_ops, lsi_ops; | |
311 | ||
c5aa993b JM |
312 | enum mips_monitor_type |
313 | { | |
314 | /* IDT/SIM monitor being used: */ | |
315 | MON_IDT, | |
316 | /* PMON monitor being used: */ | |
317 | MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */ | |
318 | MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */ | |
319 | MON_LSI, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */ | |
320 | /* Last and unused value, for sizing vectors, etc. */ | |
321 | MON_LAST | |
322 | }; | |
c906108c SS |
323 | static enum mips_monitor_type mips_monitor = MON_LAST; |
324 | ||
325 | /* The monitor prompt text. If the user sets the PMON prompt | |
326 | to some new value, the GDB `set monitor-prompt' command must also | |
327 | be used to inform GDB about the expected prompt. Otherwise, GDB | |
328 | will not be able to connect to PMON in mips_initialize(). | |
329 | If the `set monitor-prompt' command is not used, the expected | |
330 | default prompt will be set according the target: | |
c5aa993b JM |
331 | target prompt |
332 | ----- ----- | |
333 | pmon PMON> | |
334 | ddb NEC010> | |
335 | lsi PMON> | |
336 | */ | |
c906108c SS |
337 | static char *mips_monitor_prompt; |
338 | ||
339 | /* Set to 1 if the target is open. */ | |
340 | static int mips_is_open; | |
341 | ||
342 | /* Currently active target description (if mips_is_open == 1) */ | |
343 | static struct target_ops *current_ops; | |
344 | ||
345 | /* Set to 1 while the connection is being initialized. */ | |
346 | static int mips_initializing; | |
347 | ||
348 | /* Set to 1 while the connection is being brought down. */ | |
349 | static int mips_exiting; | |
350 | ||
351 | /* The next sequence number to send. */ | |
352 | static unsigned int mips_send_seq; | |
353 | ||
354 | /* The next sequence number we expect to receive. */ | |
355 | static unsigned int mips_receive_seq; | |
356 | ||
357 | /* The time to wait before retransmitting a packet, in seconds. */ | |
358 | static int mips_retransmit_wait = 3; | |
359 | ||
360 | /* The number of times to try retransmitting a packet before giving up. */ | |
361 | static int mips_send_retries = 10; | |
362 | ||
363 | /* The number of garbage characters to accept when looking for an | |
364 | SYN for the next packet. */ | |
365 | static int mips_syn_garbage = 1050; | |
366 | ||
367 | /* The time to wait for a packet, in seconds. */ | |
368 | static int mips_receive_wait = 5; | |
369 | ||
370 | /* Set if we have sent a packet to the board but have not yet received | |
371 | a reply. */ | |
372 | static int mips_need_reply = 0; | |
373 | ||
374 | /* Handle used to access serial I/O stream. */ | |
375 | static serial_t mips_desc; | |
376 | ||
377 | /* UDP handle used to download files to target. */ | |
378 | static serial_t udp_desc; | |
379 | static int udp_in_use; | |
380 | ||
381 | /* TFTP filename used to download files to DDB board, in the form | |
382 | host:filename. */ | |
383 | static char *tftp_name; /* host:filename */ | |
384 | static char *tftp_localname; /* filename portion of above */ | |
385 | static int tftp_in_use; | |
386 | static FILE *tftp_file; | |
387 | ||
388 | /* Counts the number of times the user tried to interrupt the target (usually | |
389 | via ^C. */ | |
390 | static int interrupt_count; | |
391 | ||
392 | /* If non-zero, means that the target is running. */ | |
393 | static int mips_wait_flag = 0; | |
394 | ||
395 | /* If non-zero, monitor supports breakpoint commands. */ | |
d4f3574e | 396 | static int monitor_supports_breakpoints = 0; |
c906108c SS |
397 | |
398 | /* Data cache header. */ | |
399 | ||
c5aa993b | 400 | #if 0 /* not used (yet?) */ |
c906108c SS |
401 | static DCACHE *mips_dcache; |
402 | #endif | |
403 | ||
404 | /* Non-zero means that we've just hit a read or write watchpoint */ | |
405 | static int hit_watchpoint; | |
406 | ||
407 | /* Table of breakpoints/watchpoints (used only on LSI PMON target). | |
408 | The table is indexed by a breakpoint number, which is an integer | |
409 | from 0 to 255 returned by the LSI PMON when a breakpoint is set. | |
c5aa993b | 410 | */ |
c906108c SS |
411 | #define MAX_LSI_BREAKPOINTS 256 |
412 | struct lsi_breakpoint_info | |
c5aa993b JM |
413 | { |
414 | enum break_type type; /* type of breakpoint */ | |
415 | CORE_ADDR addr; /* address of breakpoint */ | |
416 | int len; /* length of region being watched */ | |
417 | unsigned long value; /* value to watch */ | |
418 | } | |
419 | lsi_breakpoints[MAX_LSI_BREAKPOINTS]; | |
c906108c SS |
420 | |
421 | /* Error/warning codes returned by LSI PMON for breakpoint commands. | |
422 | Warning values may be ORed together; error values may not. */ | |
c5aa993b JM |
423 | #define W_WARN 0x100 /* This bit is set if the error code is a warning */ |
424 | #define W_MSK 0x101 /* warning: Range feature is supported via mask */ | |
425 | #define W_VAL 0x102 /* warning: Value check is not supported in hardware */ | |
426 | #define W_QAL 0x104 /* warning: Requested qualifiers are not supported in hardware */ | |
427 | ||
428 | #define E_ERR 0x200 /* This bit is set if the error code is an error */ | |
429 | #define E_BPT 0x200 /* error: No such breakpoint number */ | |
430 | #define E_RGE 0x201 /* error: Range is not supported */ | |
431 | #define E_QAL 0x202 /* error: The requested qualifiers can not be used */ | |
432 | #define E_OUT 0x203 /* error: Out of hardware resources */ | |
433 | #define E_NON 0x204 /* error: Hardware breakpoint not supported */ | |
c906108c SS |
434 | |
435 | struct lsi_error | |
c5aa993b JM |
436 | { |
437 | int code; /* error code */ | |
438 | char *string; /* string associated with this code */ | |
439 | }; | |
c906108c SS |
440 | |
441 | struct lsi_error lsi_warning_table[] = | |
442 | { | |
c5aa993b JM |
443 | {W_MSK, "Range feature is supported via mask"}, |
444 | {W_VAL, "Value check is not supported in hardware"}, | |
445 | {W_QAL, "Requested qualifiers are not supported in hardware"}, | |
446 | {0, NULL} | |
c906108c SS |
447 | }; |
448 | ||
449 | struct lsi_error lsi_error_table[] = | |
c5aa993b JM |
450 | { |
451 | {E_BPT, "No such breakpoint number"}, | |
452 | {E_RGE, "Range is not supported"}, | |
453 | {E_QAL, "The requested qualifiers can not be used"}, | |
454 | {E_OUT, "Out of hardware resources"}, | |
455 | {E_NON, "Hardware breakpoint not supported"}, | |
456 | {0, NULL} | |
c906108c SS |
457 | }; |
458 | ||
459 | /* Set to 1 with the 'set monitor-warnings' command to enable printing | |
460 | of warnings returned by PMON when hardware breakpoints are used. */ | |
461 | static int monitor_warnings; | |
462 | ||
463 | ||
464 | static void | |
c5aa993b | 465 | close_ports () |
c906108c SS |
466 | { |
467 | mips_is_open = 0; | |
468 | SERIAL_CLOSE (mips_desc); | |
469 | ||
470 | if (udp_in_use) | |
471 | { | |
472 | SERIAL_CLOSE (udp_desc); | |
473 | udp_in_use = 0; | |
474 | } | |
475 | tftp_in_use = 0; | |
476 | } | |
c5aa993b | 477 | |
c906108c SS |
478 | /* Handle low-level error that we can't recover from. Note that just |
479 | error()ing out from target_wait or some such low-level place will cause | |
480 | all hell to break loose--the rest of GDB will tend to get left in an | |
481 | inconsistent state. */ | |
482 | ||
483 | static NORETURN void | |
c5aa993b | 484 | mips_error (char *string,...) |
c906108c SS |
485 | { |
486 | va_list args; | |
487 | ||
c906108c | 488 | va_start (args, string); |
c5aa993b | 489 | |
c906108c | 490 | target_terminal_ours (); |
c5aa993b | 491 | wrap_here (""); /* Force out any buffered output */ |
c906108c SS |
492 | gdb_flush (gdb_stdout); |
493 | if (error_pre_print) | |
494 | fprintf_filtered (gdb_stderr, error_pre_print); | |
495 | vfprintf_filtered (gdb_stderr, string, args); | |
496 | fprintf_filtered (gdb_stderr, "\n"); | |
497 | va_end (args); | |
498 | gdb_flush (gdb_stderr); | |
499 | ||
500 | /* Clean up in such a way that mips_close won't try to talk to the | |
501 | board (it almost surely won't work since we weren't able to talk to | |
502 | it). */ | |
503 | close_ports (); | |
504 | ||
505 | printf_unfiltered ("Ending remote MIPS debugging.\n"); | |
506 | target_mourn_inferior (); | |
507 | ||
508 | return_to_top_level (RETURN_ERROR); | |
509 | } | |
510 | ||
511 | /* putc_readable - print a character, displaying non-printable chars in | |
512 | ^x notation or in hex. */ | |
513 | ||
514 | static void | |
9846de1b | 515 | fputc_readable (ch, file) |
c906108c | 516 | int ch; |
9846de1b | 517 | struct gdb_file *file; |
c906108c SS |
518 | { |
519 | if (ch == '\n') | |
9846de1b | 520 | fputc_unfiltered ('\n', file); |
c906108c | 521 | else if (ch == '\r') |
9846de1b | 522 | fprintf_unfiltered (file, "\\r"); |
c5aa993b | 523 | else if (ch < 0x20) /* ASCII control character */ |
9846de1b | 524 | fprintf_unfiltered (file, "^%c", ch + '@'); |
c5aa993b | 525 | else if (ch >= 0x7f) /* non-ASCII characters (rubout or greater) */ |
9846de1b | 526 | fprintf_unfiltered (file, "[%02x]", ch & 0xff); |
c906108c | 527 | else |
9846de1b | 528 | fputc_unfiltered (ch, file); |
c906108c SS |
529 | } |
530 | ||
531 | ||
532 | /* puts_readable - print a string, displaying non-printable chars in | |
533 | ^x notation or in hex. */ | |
534 | ||
535 | static void | |
9846de1b | 536 | fputs_readable (string, file) |
c906108c | 537 | char *string; |
9846de1b | 538 | struct gdb_file *file; |
c906108c SS |
539 | { |
540 | int c; | |
541 | ||
542 | while ((c = *string++) != '\0') | |
9846de1b | 543 | fputc_readable (c, file); |
c906108c SS |
544 | } |
545 | ||
546 | ||
547 | /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if | |
548 | timed out. TIMEOUT specifies timeout value in seconds. | |
c5aa993b | 549 | */ |
c906108c SS |
550 | |
551 | int | |
552 | mips_expect_timeout (string, timeout) | |
553 | char *string; | |
554 | int timeout; | |
555 | { | |
556 | char *p = string; | |
557 | ||
558 | if (remote_debug) | |
559 | { | |
9846de1b JM |
560 | fprintf_unfiltered (gdb_stdlog, "Expected \""); |
561 | fputs_readable (string, gdb_stdlog); | |
562 | fprintf_unfiltered (gdb_stdlog, "\", got \""); | |
c906108c SS |
563 | } |
564 | ||
565 | immediate_quit = 1; | |
566 | while (1) | |
567 | { | |
568 | int c; | |
569 | ||
570 | /* Must use SERIAL_READCHAR here cuz mips_readchar would get confused if we | |
571 | were waiting for the mips_monitor_prompt... */ | |
572 | ||
573 | c = SERIAL_READCHAR (mips_desc, timeout); | |
574 | ||
575 | if (c == SERIAL_TIMEOUT) | |
576 | { | |
577 | if (remote_debug) | |
9846de1b | 578 | fprintf_unfiltered (gdb_stdlog, "\": FAIL\n"); |
c906108c SS |
579 | return 0; |
580 | } | |
581 | ||
582 | if (remote_debug) | |
9846de1b | 583 | fputc_readable (c, gdb_stdlog); |
c906108c SS |
584 | |
585 | if (c == *p++) | |
c5aa993b | 586 | { |
c906108c SS |
587 | if (*p == '\0') |
588 | { | |
589 | immediate_quit = 0; | |
590 | if (remote_debug) | |
9846de1b | 591 | fprintf_unfiltered (gdb_stdlog, "\": OK\n"); |
c906108c SS |
592 | return 1; |
593 | } | |
594 | } | |
595 | else | |
596 | { | |
597 | p = string; | |
598 | if (c == *p) | |
599 | p++; | |
600 | } | |
601 | } | |
602 | } | |
603 | ||
604 | /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if | |
605 | timed out. The timeout value is hard-coded to 2 seconds. Use | |
606 | mips_expect_timeout if a different timeout value is needed. | |
c5aa993b | 607 | */ |
c906108c SS |
608 | |
609 | int | |
610 | mips_expect (string) | |
611 | char *string; | |
612 | { | |
c5aa993b | 613 | return mips_expect_timeout (string, 2); |
c906108c SS |
614 | } |
615 | ||
616 | /* Read the required number of characters into the given buffer (which | |
617 | is assumed to be large enough). The only failure is a timeout. */ | |
618 | int | |
619 | mips_getstring (string, n) | |
620 | char *string; | |
621 | int n; | |
622 | { | |
623 | char *p = string; | |
624 | int c; | |
625 | ||
626 | immediate_quit = 1; | |
627 | while (n > 0) | |
628 | { | |
629 | c = SERIAL_READCHAR (mips_desc, 2); | |
630 | ||
c5aa993b JM |
631 | if (c == SERIAL_TIMEOUT) |
632 | { | |
633 | fprintf_unfiltered (gdb_stderr, | |
634 | "Failed to read %d characters from target (TIMEOUT)\n", n); | |
635 | return 0; | |
636 | } | |
c906108c SS |
637 | |
638 | *p++ = c; | |
639 | n--; | |
640 | } | |
641 | ||
642 | return 1; | |
643 | } | |
644 | ||
645 | /* Read a character from the remote, aborting on error. Returns | |
646 | SERIAL_TIMEOUT on timeout (since that's what SERIAL_READCHAR | |
647 | returns). FIXME: If we see the string mips_monitor_prompt from | |
648 | the board, then we are debugging on the main console port, and we | |
649 | have somehow dropped out of remote debugging mode. In this case, | |
650 | we automatically go back in to remote debugging mode. This is a | |
651 | hack, put in because I can't find any way for a program running on | |
652 | the remote board to terminate without also ending remote debugging | |
653 | mode. I assume users won't have any trouble with this; for one | |
654 | thing, the IDT documentation generally assumes that the remote | |
655 | debugging port is not the console port. This is, however, very | |
656 | convenient for DejaGnu when you only have one connected serial | |
657 | port. */ | |
658 | ||
659 | static int | |
660 | mips_readchar (timeout) | |
661 | int timeout; | |
662 | { | |
663 | int ch; | |
664 | static int state = 0; | |
665 | int mips_monitor_prompt_len = strlen (mips_monitor_prompt); | |
666 | ||
c906108c SS |
667 | { |
668 | int i; | |
669 | ||
670 | i = timeout; | |
671 | if (i == -1 && watchdog > 0) | |
c5aa993b | 672 | i = watchdog; |
c906108c | 673 | } |
c906108c SS |
674 | |
675 | if (state == mips_monitor_prompt_len) | |
676 | timeout = 1; | |
677 | ch = SERIAL_READCHAR (mips_desc, timeout); | |
7a292a7a | 678 | |
c5aa993b | 679 | if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off */ |
c906108c SS |
680 | { |
681 | target_mourn_inferior (); | |
682 | error ("Watchdog has expired. Target detached.\n"); | |
683 | } | |
7a292a7a | 684 | |
c906108c SS |
685 | if (ch == SERIAL_EOF) |
686 | mips_error ("End of file from remote"); | |
687 | if (ch == SERIAL_ERROR) | |
688 | mips_error ("Error reading from remote: %s", safe_strerror (errno)); | |
689 | if (remote_debug > 1) | |
690 | { | |
691 | /* Don't use _filtered; we can't deal with a QUIT out of | |
c5aa993b | 692 | target_wait, and I think this might be called from there. */ |
c906108c | 693 | if (ch != SERIAL_TIMEOUT) |
9846de1b | 694 | fprintf_unfiltered (gdb_stdlog, "Read '%c' %d 0x%x\n", ch, ch, ch); |
c906108c | 695 | else |
9846de1b | 696 | fprintf_unfiltered (gdb_stdlog, "Timed out in read\n"); |
c906108c SS |
697 | } |
698 | ||
699 | /* If we have seen mips_monitor_prompt and we either time out, or | |
700 | we see a @ (which was echoed from a packet we sent), reset the | |
701 | board as described above. The first character in a packet after | |
702 | the SYN (which is not echoed) is always an @ unless the packet is | |
703 | more than 64 characters long, which ours never are. */ | |
704 | if ((ch == SERIAL_TIMEOUT || ch == '@') | |
705 | && state == mips_monitor_prompt_len | |
c5aa993b JM |
706 | && !mips_initializing |
707 | && !mips_exiting) | |
c906108c SS |
708 | { |
709 | if (remote_debug > 0) | |
710 | /* Don't use _filtered; we can't deal with a QUIT out of | |
711 | target_wait, and I think this might be called from there. */ | |
9846de1b | 712 | fprintf_unfiltered (gdb_stdlog, "Reinitializing MIPS debugging mode\n"); |
c906108c SS |
713 | |
714 | mips_need_reply = 0; | |
715 | mips_initialize (); | |
716 | ||
717 | state = 0; | |
718 | ||
719 | /* At this point, about the only thing we can do is abort the command | |
c5aa993b | 720 | in progress and get back to command level as quickly as possible. */ |
c906108c SS |
721 | |
722 | error ("Remote board reset, debug protocol re-initialized."); | |
723 | } | |
724 | ||
725 | if (ch == mips_monitor_prompt[state]) | |
726 | ++state; | |
727 | else | |
728 | state = 0; | |
729 | ||
730 | return ch; | |
731 | } | |
732 | ||
733 | /* Get a packet header, putting the data in the supplied buffer. | |
734 | PGARBAGE is a pointer to the number of garbage characters received | |
735 | so far. CH is the last character received. Returns 0 for success, | |
736 | or -1 for timeout. */ | |
737 | ||
738 | static int | |
739 | mips_receive_header (hdr, pgarbage, ch, timeout) | |
740 | unsigned char *hdr; | |
741 | int *pgarbage; | |
742 | int ch; | |
743 | int timeout; | |
744 | { | |
745 | int i; | |
746 | ||
747 | while (1) | |
748 | { | |
749 | /* Wait for a SYN. mips_syn_garbage is intended to prevent | |
c5aa993b JM |
750 | sitting here indefinitely if the board sends us one garbage |
751 | character per second. ch may already have a value from the | |
752 | last time through the loop. */ | |
c906108c SS |
753 | while (ch != SYN) |
754 | { | |
755 | ch = mips_readchar (timeout); | |
756 | if (ch == SERIAL_TIMEOUT) | |
c5aa993b | 757 | return -1; |
c906108c SS |
758 | if (ch != SYN) |
759 | { | |
760 | /* Printing the character here lets the user of gdb see | |
c5aa993b JM |
761 | what the program is outputting, if the debugging is |
762 | being done on the console port. Don't use _filtered; | |
763 | we can't deal with a QUIT out of target_wait. */ | |
764 | if (!mips_initializing || remote_debug > 0) | |
c906108c | 765 | { |
9846de1b JM |
766 | fputc_readable (ch, gdb_stdlog); |
767 | gdb_flush (gdb_stdlog); | |
c906108c SS |
768 | } |
769 | ||
770 | ++*pgarbage; | |
771 | if (mips_syn_garbage > 0 | |
772 | && *pgarbage > mips_syn_garbage) | |
c5aa993b | 773 | mips_error ("Debug protocol failure: more than %d characters before a sync.", |
c906108c SS |
774 | mips_syn_garbage); |
775 | } | |
776 | } | |
777 | ||
778 | /* Get the packet header following the SYN. */ | |
779 | for (i = 1; i < HDR_LENGTH; i++) | |
780 | { | |
781 | ch = mips_readchar (timeout); | |
782 | if (ch == SERIAL_TIMEOUT) | |
c5aa993b | 783 | return -1; |
c906108c | 784 | /* Make sure this is a header byte. */ |
c5aa993b | 785 | if (ch == SYN || !HDR_CHECK (ch)) |
c906108c SS |
786 | break; |
787 | ||
788 | hdr[i] = ch; | |
789 | } | |
790 | ||
791 | /* If we got the complete header, we can return. Otherwise we | |
c5aa993b | 792 | loop around and keep looking for SYN. */ |
c906108c | 793 | if (i >= HDR_LENGTH) |
c5aa993b | 794 | return 0; |
c906108c SS |
795 | } |
796 | } | |
797 | ||
798 | /* Get a packet header, putting the data in the supplied buffer. | |
799 | PGARBAGE is a pointer to the number of garbage characters received | |
800 | so far. The last character read is returned in *PCH. Returns 0 | |
801 | for success, -1 for timeout, -2 for error. */ | |
802 | ||
803 | static int | |
804 | mips_receive_trailer (trlr, pgarbage, pch, timeout) | |
805 | unsigned char *trlr; | |
806 | int *pgarbage; | |
807 | int *pch; | |
808 | int timeout; | |
809 | { | |
810 | int i; | |
811 | int ch; | |
812 | ||
813 | for (i = 0; i < TRLR_LENGTH; i++) | |
814 | { | |
815 | ch = mips_readchar (timeout); | |
816 | *pch = ch; | |
817 | if (ch == SERIAL_TIMEOUT) | |
818 | return -1; | |
c5aa993b | 819 | if (!TRLR_CHECK (ch)) |
c906108c SS |
820 | return -2; |
821 | trlr[i] = ch; | |
822 | } | |
823 | return 0; | |
824 | } | |
825 | ||
826 | /* Get the checksum of a packet. HDR points to the packet header. | |
827 | DATA points to the packet data. LEN is the length of DATA. */ | |
828 | ||
829 | static int | |
830 | mips_cksum (hdr, data, len) | |
831 | const unsigned char *hdr; | |
832 | const unsigned char *data; | |
833 | int len; | |
834 | { | |
835 | register const unsigned char *p; | |
836 | register int c; | |
837 | register int cksum; | |
838 | ||
839 | cksum = 0; | |
840 | ||
841 | /* The initial SYN is not included in the checksum. */ | |
842 | c = HDR_LENGTH - 1; | |
843 | p = hdr + 1; | |
844 | while (c-- != 0) | |
845 | cksum += *p++; | |
c5aa993b | 846 | |
c906108c SS |
847 | c = len; |
848 | p = data; | |
849 | while (c-- != 0) | |
850 | cksum += *p++; | |
851 | ||
852 | return cksum; | |
853 | } | |
854 | ||
855 | /* Send a packet containing the given ASCII string. */ | |
856 | ||
857 | static void | |
858 | mips_send_packet (s, get_ack) | |
859 | const char *s; | |
860 | int get_ack; | |
861 | { | |
862 | /* unsigned */ int len; | |
863 | unsigned char *packet; | |
864 | register int cksum; | |
865 | int try; | |
866 | ||
867 | len = strlen (s); | |
868 | if (len > DATA_MAXLEN) | |
869 | mips_error ("MIPS protocol data packet too long: %s", s); | |
870 | ||
871 | packet = (unsigned char *) alloca (HDR_LENGTH + len + TRLR_LENGTH + 1); | |
872 | ||
873 | packet[HDR_INDX_SYN] = HDR_SET_SYN (1, len, mips_send_seq); | |
874 | packet[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (1, len, mips_send_seq); | |
875 | packet[HDR_INDX_LEN1] = HDR_SET_LEN1 (1, len, mips_send_seq); | |
876 | packet[HDR_INDX_SEQ] = HDR_SET_SEQ (1, len, mips_send_seq); | |
877 | ||
878 | memcpy (packet + HDR_LENGTH, s, len); | |
879 | ||
880 | cksum = mips_cksum (packet, packet + HDR_LENGTH, len); | |
881 | packet[HDR_LENGTH + len + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); | |
882 | packet[HDR_LENGTH + len + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); | |
883 | packet[HDR_LENGTH + len + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); | |
884 | ||
885 | /* Increment the sequence number. This will set mips_send_seq to | |
886 | the sequence number we expect in the acknowledgement. */ | |
887 | mips_send_seq = (mips_send_seq + 1) % SEQ_MODULOS; | |
888 | ||
889 | /* We can only have one outstanding data packet, so we just wait for | |
890 | the acknowledgement here. Keep retransmitting the packet until | |
891 | we get one, or until we've tried too many times. */ | |
892 | for (try = 0; try < mips_send_retries; try++) | |
893 | { | |
894 | int garbage; | |
895 | int ch; | |
896 | ||
897 | if (remote_debug > 0) | |
898 | { | |
899 | /* Don't use _filtered; we can't deal with a QUIT out of | |
900 | target_wait, and I think this might be called from there. */ | |
901 | packet[HDR_LENGTH + len + TRLR_LENGTH] = '\0'; | |
9846de1b | 902 | fprintf_unfiltered (gdb_stdlog, "Writing \"%s\"\n", packet + 1); |
c906108c SS |
903 | } |
904 | ||
905 | if (SERIAL_WRITE (mips_desc, packet, | |
906 | HDR_LENGTH + len + TRLR_LENGTH) != 0) | |
907 | mips_error ("write to target failed: %s", safe_strerror (errno)); | |
908 | ||
c5aa993b | 909 | if (!get_ack) |
c906108c SS |
910 | return; |
911 | ||
912 | garbage = 0; | |
913 | ch = 0; | |
914 | while (1) | |
915 | { | |
916 | unsigned char hdr[HDR_LENGTH + 1]; | |
917 | unsigned char trlr[TRLR_LENGTH + 1]; | |
918 | int err; | |
919 | unsigned int seq; | |
920 | ||
921 | /* Get the packet header. If we time out, resend the data | |
922 | packet. */ | |
923 | err = mips_receive_header (hdr, &garbage, ch, mips_retransmit_wait); | |
924 | if (err != 0) | |
925 | break; | |
926 | ||
927 | ch = 0; | |
928 | ||
929 | /* If we get a data packet, assume it is a duplicate and | |
930 | ignore it. FIXME: If the acknowledgement is lost, this | |
931 | data packet may be the packet the remote sends after the | |
932 | acknowledgement. */ | |
c5aa993b JM |
933 | if (HDR_IS_DATA (hdr)) |
934 | { | |
935 | int i; | |
936 | ||
937 | /* Ignore any errors raised whilst attempting to ignore | |
938 | packet. */ | |
939 | ||
940 | len = HDR_GET_LEN (hdr); | |
941 | ||
942 | for (i = 0; i < len; i++) | |
943 | { | |
944 | int rch; | |
945 | ||
946 | rch = mips_readchar (2); | |
947 | if (rch == SYN) | |
948 | { | |
949 | ch = SYN; | |
950 | break; | |
951 | } | |
952 | if (rch == SERIAL_TIMEOUT) | |
953 | break; | |
954 | /* ignore the character */ | |
955 | } | |
956 | ||
957 | if (i == len) | |
958 | (void) mips_receive_trailer (trlr, &garbage, &ch, 2); | |
959 | ||
960 | /* We don't bother checking the checksum, or providing an | |
961 | ACK to the packet. */ | |
962 | continue; | |
963 | } | |
c906108c SS |
964 | |
965 | /* If the length is not 0, this is a garbled packet. */ | |
966 | if (HDR_GET_LEN (hdr) != 0) | |
967 | continue; | |
968 | ||
969 | /* Get the packet trailer. */ | |
970 | err = mips_receive_trailer (trlr, &garbage, &ch, | |
971 | mips_retransmit_wait); | |
972 | ||
973 | /* If we timed out, resend the data packet. */ | |
974 | if (err == -1) | |
975 | break; | |
976 | ||
977 | /* If we got a bad character, reread the header. */ | |
978 | if (err != 0) | |
979 | continue; | |
980 | ||
981 | /* If the checksum does not match the trailer checksum, this | |
982 | is a bad packet; ignore it. */ | |
983 | if (mips_cksum (hdr, (unsigned char *) NULL, 0) | |
984 | != TRLR_GET_CKSUM (trlr)) | |
985 | continue; | |
986 | ||
987 | if (remote_debug > 0) | |
988 | { | |
989 | hdr[HDR_LENGTH] = '\0'; | |
990 | trlr[TRLR_LENGTH] = '\0'; | |
991 | /* Don't use _filtered; we can't deal with a QUIT out of | |
c5aa993b | 992 | target_wait, and I think this might be called from there. */ |
9846de1b JM |
993 | fprintf_unfiltered (gdb_stdlog, "Got ack %d \"%s%s\"\n", |
994 | HDR_GET_SEQ (hdr), hdr + 1, trlr); | |
c906108c SS |
995 | } |
996 | ||
997 | /* If this ack is for the current packet, we're done. */ | |
998 | seq = HDR_GET_SEQ (hdr); | |
999 | if (seq == mips_send_seq) | |
1000 | return; | |
1001 | ||
1002 | /* If this ack is for the last packet, resend the current | |
1003 | packet. */ | |
1004 | if ((seq + 1) % SEQ_MODULOS == mips_send_seq) | |
1005 | break; | |
1006 | ||
1007 | /* Otherwise this is a bad ack; ignore it. Increment the | |
1008 | garbage count to ensure that we do not stay in this loop | |
1009 | forever. */ | |
1010 | ++garbage; | |
1011 | } | |
1012 | } | |
1013 | ||
1014 | mips_error ("Remote did not acknowledge packet"); | |
1015 | } | |
1016 | ||
1017 | /* Receive and acknowledge a packet, returning the data in BUFF (which | |
1018 | should be DATA_MAXLEN + 1 bytes). The protocol documentation | |
1019 | implies that only the sender retransmits packets, so this code just | |
1020 | waits silently for a packet. It returns the length of the received | |
1021 | packet. If THROW_ERROR is nonzero, call error() on errors. If not, | |
1022 | don't print an error message and return -1. */ | |
1023 | ||
1024 | static int | |
1025 | mips_receive_packet (buff, throw_error, timeout) | |
1026 | char *buff; | |
1027 | int throw_error; | |
1028 | int timeout; | |
1029 | { | |
1030 | int ch; | |
1031 | int garbage; | |
1032 | int len; | |
1033 | unsigned char ack[HDR_LENGTH + TRLR_LENGTH + 1]; | |
1034 | int cksum; | |
1035 | ||
1036 | ch = 0; | |
1037 | garbage = 0; | |
1038 | while (1) | |
1039 | { | |
1040 | unsigned char hdr[HDR_LENGTH]; | |
1041 | unsigned char trlr[TRLR_LENGTH]; | |
1042 | int i; | |
1043 | int err; | |
1044 | ||
1045 | if (mips_receive_header (hdr, &garbage, ch, timeout) != 0) | |
1046 | { | |
1047 | if (throw_error) | |
1048 | mips_error ("Timed out waiting for remote packet"); | |
1049 | else | |
1050 | return -1; | |
1051 | } | |
1052 | ||
1053 | ch = 0; | |
1054 | ||
1055 | /* An acknowledgement is probably a duplicate; ignore it. */ | |
c5aa993b | 1056 | if (!HDR_IS_DATA (hdr)) |
c906108c | 1057 | { |
c5aa993b JM |
1058 | len = HDR_GET_LEN (hdr); |
1059 | /* Check if the length is valid for an ACK, we may aswell | |
1060 | try and read the remainder of the packet: */ | |
1061 | if (len == 0) | |
1062 | { | |
1063 | /* Ignore the error condition, since we are going to | |
1064 | ignore the packet anyway. */ | |
1065 | (void) mips_receive_trailer (trlr, &garbage, &ch, timeout); | |
1066 | } | |
c906108c SS |
1067 | /* Don't use _filtered; we can't deal with a QUIT out of |
1068 | target_wait, and I think this might be called from there. */ | |
1069 | if (remote_debug > 0) | |
9846de1b | 1070 | fprintf_unfiltered (gdb_stdlog, "Ignoring unexpected ACK\n"); |
c906108c SS |
1071 | continue; |
1072 | } | |
1073 | ||
1074 | len = HDR_GET_LEN (hdr); | |
1075 | for (i = 0; i < len; i++) | |
1076 | { | |
1077 | int rch; | |
1078 | ||
1079 | rch = mips_readchar (timeout); | |
1080 | if (rch == SYN) | |
1081 | { | |
1082 | ch = SYN; | |
1083 | break; | |
1084 | } | |
1085 | if (rch == SERIAL_TIMEOUT) | |
1086 | { | |
1087 | if (throw_error) | |
1088 | mips_error ("Timed out waiting for remote packet"); | |
1089 | else | |
1090 | return -1; | |
1091 | } | |
1092 | buff[i] = rch; | |
1093 | } | |
1094 | ||
1095 | if (i < len) | |
1096 | { | |
1097 | /* Don't use _filtered; we can't deal with a QUIT out of | |
1098 | target_wait, and I think this might be called from there. */ | |
1099 | if (remote_debug > 0) | |
9846de1b JM |
1100 | fprintf_unfiltered (gdb_stdlog, |
1101 | "Got new SYN after %d chars (wanted %d)\n", | |
1102 | i, len); | |
c906108c SS |
1103 | continue; |
1104 | } | |
1105 | ||
1106 | err = mips_receive_trailer (trlr, &garbage, &ch, timeout); | |
1107 | if (err == -1) | |
1108 | { | |
1109 | if (throw_error) | |
1110 | mips_error ("Timed out waiting for packet"); | |
1111 | else | |
1112 | return -1; | |
1113 | } | |
1114 | if (err == -2) | |
1115 | { | |
1116 | /* Don't use _filtered; we can't deal with a QUIT out of | |
1117 | target_wait, and I think this might be called from there. */ | |
1118 | if (remote_debug > 0) | |
9846de1b | 1119 | fprintf_unfiltered (gdb_stdlog, "Got SYN when wanted trailer\n"); |
c906108c SS |
1120 | continue; |
1121 | } | |
1122 | ||
1123 | /* If this is the wrong sequence number, ignore it. */ | |
1124 | if (HDR_GET_SEQ (hdr) != mips_receive_seq) | |
1125 | { | |
1126 | /* Don't use _filtered; we can't deal with a QUIT out of | |
1127 | target_wait, and I think this might be called from there. */ | |
1128 | if (remote_debug > 0) | |
9846de1b | 1129 | fprintf_unfiltered (gdb_stdlog, |
c5aa993b JM |
1130 | "Ignoring sequence number %d (want %d)\n", |
1131 | HDR_GET_SEQ (hdr), mips_receive_seq); | |
c906108c SS |
1132 | continue; |
1133 | } | |
1134 | ||
1135 | if (mips_cksum (hdr, buff, len) == TRLR_GET_CKSUM (trlr)) | |
c5aa993b | 1136 | break; |
c906108c SS |
1137 | |
1138 | if (remote_debug > 0) | |
1139 | /* Don't use _filtered; we can't deal with a QUIT out of | |
1140 | target_wait, and I think this might be called from there. */ | |
1141 | printf_unfiltered ("Bad checksum; data %d, trailer %d\n", | |
c5aa993b JM |
1142 | mips_cksum (hdr, buff, len), |
1143 | TRLR_GET_CKSUM (trlr)); | |
c906108c SS |
1144 | |
1145 | /* The checksum failed. Send an acknowledgement for the | |
c5aa993b | 1146 | previous packet to tell the remote to resend the packet. */ |
c906108c SS |
1147 | ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq); |
1148 | ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq); | |
1149 | ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq); | |
1150 | ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq); | |
1151 | ||
1152 | cksum = mips_cksum (ack, (unsigned char *) NULL, 0); | |
1153 | ||
1154 | ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); | |
1155 | ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); | |
1156 | ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); | |
1157 | ||
1158 | if (remote_debug > 0) | |
1159 | { | |
1160 | ack[HDR_LENGTH + TRLR_LENGTH] = '\0'; | |
1161 | /* Don't use _filtered; we can't deal with a QUIT out of | |
1162 | target_wait, and I think this might be called from there. */ | |
1163 | printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq, | |
c5aa993b | 1164 | ack + 1); |
c906108c SS |
1165 | } |
1166 | ||
1167 | if (SERIAL_WRITE (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0) | |
1168 | { | |
1169 | if (throw_error) | |
1170 | mips_error ("write to target failed: %s", safe_strerror (errno)); | |
1171 | else | |
1172 | return -1; | |
1173 | } | |
1174 | } | |
1175 | ||
1176 | if (remote_debug > 0) | |
1177 | { | |
1178 | buff[len] = '\0'; | |
1179 | /* Don't use _filtered; we can't deal with a QUIT out of | |
c5aa993b | 1180 | target_wait, and I think this might be called from there. */ |
c906108c SS |
1181 | printf_unfiltered ("Got packet \"%s\"\n", buff); |
1182 | } | |
1183 | ||
1184 | /* We got the packet. Send an acknowledgement. */ | |
1185 | mips_receive_seq = (mips_receive_seq + 1) % SEQ_MODULOS; | |
1186 | ||
1187 | ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq); | |
1188 | ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq); | |
1189 | ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq); | |
1190 | ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq); | |
1191 | ||
1192 | cksum = mips_cksum (ack, (unsigned char *) NULL, 0); | |
1193 | ||
1194 | ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum); | |
1195 | ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum); | |
1196 | ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum); | |
1197 | ||
1198 | if (remote_debug > 0) | |
1199 | { | |
1200 | ack[HDR_LENGTH + TRLR_LENGTH] = '\0'; | |
1201 | /* Don't use _filtered; we can't deal with a QUIT out of | |
c5aa993b | 1202 | target_wait, and I think this might be called from there. */ |
c906108c | 1203 | printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq, |
c5aa993b | 1204 | ack + 1); |
c906108c SS |
1205 | } |
1206 | ||
1207 | if (SERIAL_WRITE (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0) | |
1208 | { | |
1209 | if (throw_error) | |
1210 | mips_error ("write to target failed: %s", safe_strerror (errno)); | |
1211 | else | |
1212 | return -1; | |
1213 | } | |
1214 | ||
1215 | return len; | |
1216 | } | |
1217 | \f | |
1218 | /* Optionally send a request to the remote system and optionally wait | |
1219 | for the reply. This implements the remote debugging protocol, | |
1220 | which is built on top of the packet protocol defined above. Each | |
1221 | request has an ADDR argument and a DATA argument. The following | |
1222 | requests are defined: | |
1223 | ||
c5aa993b JM |
1224 | \0 don't send a request; just wait for a reply |
1225 | i read word from instruction space at ADDR | |
1226 | d read word from data space at ADDR | |
1227 | I write DATA to instruction space at ADDR | |
1228 | D write DATA to data space at ADDR | |
1229 | r read register number ADDR | |
1230 | R set register number ADDR to value DATA | |
1231 | c continue execution (if ADDR != 1, set pc to ADDR) | |
1232 | s single step (if ADDR != 1, set pc to ADDR) | |
c906108c SS |
1233 | |
1234 | The read requests return the value requested. The write requests | |
1235 | return the previous value in the changed location. The execution | |
1236 | requests return a UNIX wait value (the approximate signal which | |
1237 | caused execution to stop is in the upper eight bits). | |
1238 | ||
1239 | If PERR is not NULL, this function waits for a reply. If an error | |
1240 | occurs, it sets *PERR to 1 and sets errno according to what the | |
1241 | target board reports. */ | |
1242 | ||
c5aa993b | 1243 | static CORE_ADDR |
c906108c SS |
1244 | mips_request (cmd, addr, data, perr, timeout, buff) |
1245 | int cmd; | |
1246 | CORE_ADDR addr; | |
1247 | CORE_ADDR data; | |
1248 | int *perr; | |
1249 | int timeout; | |
1250 | char *buff; | |
1251 | { | |
1252 | char myBuff[DATA_MAXLEN + 1]; | |
1253 | int len; | |
1254 | int rpid; | |
1255 | char rcmd; | |
1256 | int rerrflg; | |
1257 | unsigned long rresponse; | |
1258 | ||
1259 | if (buff == (char *) NULL) | |
1260 | buff = myBuff; | |
1261 | ||
1262 | if (cmd != '\0') | |
1263 | { | |
1264 | if (mips_need_reply) | |
96baa820 | 1265 | internal_error ("mips_request: Trying to send command before reply"); |
c906108c SS |
1266 | sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, paddr_nz (addr), paddr_nz (data)); |
1267 | mips_send_packet (buff, 1); | |
1268 | mips_need_reply = 1; | |
1269 | } | |
1270 | ||
1271 | if (perr == (int *) NULL) | |
1272 | return 0; | |
1273 | ||
c5aa993b | 1274 | if (!mips_need_reply) |
96baa820 | 1275 | internal_error ("mips_request: Trying to get reply before command"); |
c906108c SS |
1276 | |
1277 | mips_need_reply = 0; | |
1278 | ||
1279 | len = mips_receive_packet (buff, 1, timeout); | |
1280 | buff[len] = '\0'; | |
1281 | ||
1282 | if (sscanf (buff, "0x%x %c 0x%x 0x%lx", | |
1283 | &rpid, &rcmd, &rerrflg, &rresponse) != 4 | |
1284 | || (cmd != '\0' && rcmd != cmd)) | |
1285 | mips_error ("Bad response from remote board"); | |
1286 | ||
1287 | if (rerrflg != 0) | |
1288 | { | |
1289 | *perr = 1; | |
1290 | ||
1291 | /* FIXME: This will returns MIPS errno numbers, which may or may | |
c5aa993b JM |
1292 | not be the same as errno values used on other systems. If |
1293 | they stick to common errno values, they will be the same, but | |
1294 | if they don't, they must be translated. */ | |
c906108c SS |
1295 | errno = rresponse; |
1296 | ||
1297 | return 0; | |
1298 | } | |
1299 | ||
1300 | *perr = 0; | |
1301 | return rresponse; | |
1302 | } | |
1303 | ||
1304 | static void | |
1305 | mips_initialize_cleanups (arg) | |
1306 | PTR arg; | |
1307 | { | |
1308 | mips_initializing = 0; | |
1309 | } | |
1310 | ||
1311 | static void | |
1312 | mips_exit_cleanups (arg) | |
1313 | PTR arg; | |
1314 | { | |
1315 | mips_exiting = 0; | |
1316 | } | |
1317 | ||
1318 | static void | |
1319 | mips_send_command (cmd, prompt) | |
1320 | const char *cmd; | |
1321 | int prompt; | |
1322 | { | |
c5aa993b | 1323 | SERIAL_WRITE (mips_desc, cmd, strlen (cmd)); |
c906108c SS |
1324 | mips_expect (cmd); |
1325 | mips_expect ("\n"); | |
1326 | if (prompt) | |
1327 | mips_expect (mips_monitor_prompt); | |
1328 | } | |
1329 | ||
1330 | /* Enter remote (dbx) debug mode: */ | |
1331 | static void | |
1332 | mips_enter_debug () | |
1333 | { | |
1334 | /* Reset the sequence numbers, ready for the new debug sequence: */ | |
1335 | mips_send_seq = 0; | |
1336 | mips_receive_seq = 0; | |
1337 | ||
1338 | if (mips_monitor != MON_IDT) | |
1339 | mips_send_command ("debug\r", 0); | |
c5aa993b | 1340 | else /* assume IDT monitor by default */ |
c906108c SS |
1341 | mips_send_command ("db tty0\r", 0); |
1342 | ||
c5aa993b | 1343 | sleep (1); |
c906108c SS |
1344 | SERIAL_WRITE (mips_desc, "\r", sizeof "\r" - 1); |
1345 | ||
1346 | /* We don't need to absorb any spurious characters here, since the | |
1347 | mips_receive_header will eat up a reasonable number of characters | |
1348 | whilst looking for the SYN, however this avoids the "garbage" | |
1349 | being displayed to the user. */ | |
1350 | if (mips_monitor != MON_IDT) | |
1351 | mips_expect ("\r"); | |
c5aa993b | 1352 | |
c906108c SS |
1353 | { |
1354 | char buff[DATA_MAXLEN + 1]; | |
1355 | if (mips_receive_packet (buff, 1, 3) < 0) | |
1356 | mips_error ("Failed to initialize (didn't receive packet)."); | |
1357 | } | |
1358 | } | |
1359 | ||
1360 | /* Exit remote (dbx) debug mode, returning to the monitor prompt: */ | |
1361 | static int | |
1362 | mips_exit_debug () | |
1363 | { | |
1364 | int err; | |
1365 | struct cleanup *old_cleanups = make_cleanup (mips_exit_cleanups, NULL); | |
1366 | ||
1367 | mips_exiting = 1; | |
1368 | ||
1369 | if (mips_monitor != MON_IDT) | |
1370 | { | |
1371 | /* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately, | |
1372 | so we do not get a reply to this command: */ | |
1373 | mips_request ('x', (unsigned int) 0, (unsigned int) 0, NULL, | |
c5aa993b | 1374 | mips_receive_wait, NULL); |
c906108c SS |
1375 | mips_need_reply = 0; |
1376 | if (!mips_expect (" break!")) | |
c5aa993b | 1377 | return -1; |
c906108c SS |
1378 | } |
1379 | else | |
1380 | mips_request ('x', (unsigned int) 0, (unsigned int) 0, &err, | |
c5aa993b | 1381 | mips_receive_wait, NULL); |
c906108c SS |
1382 | |
1383 | if (!mips_expect (mips_monitor_prompt)) | |
1384 | return -1; | |
1385 | ||
1386 | do_cleanups (old_cleanups); | |
1387 | ||
1388 | return 0; | |
1389 | } | |
1390 | ||
1391 | /* Initialize a new connection to the MIPS board, and make sure we are | |
1392 | really connected. */ | |
1393 | ||
1394 | static void | |
1395 | mips_initialize () | |
1396 | { | |
1397 | int err; | |
1398 | struct cleanup *old_cleanups = make_cleanup (mips_initialize_cleanups, NULL); | |
1399 | int j; | |
1400 | ||
1401 | /* What is this code doing here? I don't see any way it can happen, and | |
1402 | it might mean mips_initializing didn't get cleared properly. | |
1403 | So I'll make it a warning. */ | |
1404 | ||
1405 | if (mips_initializing) | |
1406 | { | |
1407 | warning ("internal error: mips_initialize called twice"); | |
1408 | return; | |
1409 | } | |
1410 | ||
1411 | mips_wait_flag = 0; | |
1412 | mips_initializing = 1; | |
1413 | ||
1414 | /* At this point, the packit protocol isn't responding. We'll try getting | |
1415 | into the monitor, and restarting the protocol. */ | |
1416 | ||
1417 | /* Force the system into the monitor. After this we *should* be at | |
1418 | the mips_monitor_prompt. */ | |
1419 | if (mips_monitor != MON_IDT) | |
c5aa993b | 1420 | j = 0; /* start by checking if we are already at the prompt */ |
c906108c | 1421 | else |
c5aa993b | 1422 | j = 1; /* start by sending a break */ |
c906108c SS |
1423 | for (; j <= 4; j++) |
1424 | { | |
1425 | switch (j) | |
1426 | { | |
c5aa993b JM |
1427 | case 0: /* First, try sending a CR */ |
1428 | SERIAL_FLUSH_INPUT (mips_desc); | |
c906108c | 1429 | SERIAL_WRITE (mips_desc, "\r", 1); |
c5aa993b JM |
1430 | break; |
1431 | case 1: /* First, try sending a break */ | |
c906108c SS |
1432 | SERIAL_SEND_BREAK (mips_desc); |
1433 | break; | |
c5aa993b | 1434 | case 2: /* Then, try a ^C */ |
c906108c SS |
1435 | SERIAL_WRITE (mips_desc, "\003", 1); |
1436 | break; | |
c5aa993b | 1437 | case 3: /* Then, try escaping from download */ |
c906108c | 1438 | { |
c5aa993b JM |
1439 | if (mips_monitor != MON_IDT) |
1440 | { | |
1441 | char tbuff[7]; | |
1442 | ||
1443 | /* We shouldn't need to send multiple termination | |
1444 | sequences, since the target performs line (or | |
1445 | block) reads, and then processes those | |
1446 | packets. In-case we were downloading a large packet | |
1447 | we flush the output buffer before inserting a | |
1448 | termination sequence. */ | |
1449 | SERIAL_FLUSH_OUTPUT (mips_desc); | |
1450 | sprintf (tbuff, "\r/E/E\r"); | |
1451 | SERIAL_WRITE (mips_desc, tbuff, 6); | |
1452 | } | |
1453 | else | |
1454 | { | |
1455 | char srec[10]; | |
1456 | int i; | |
1457 | ||
1458 | /* We are possibly in binary download mode, having | |
1459 | aborted in the middle of an S-record. ^C won't | |
1460 | work because of binary mode. The only reliable way | |
1461 | out is to send enough termination packets (8 bytes) | |
1462 | to fill up and then overflow the largest size | |
1463 | S-record (255 bytes in this case). This amounts to | |
1464 | 256/8 + 1 packets. | |
1465 | */ | |
1466 | ||
1467 | mips_make_srec (srec, '7', 0, NULL, 0); | |
1468 | ||
1469 | for (i = 1; i <= 33; i++) | |
1470 | { | |
1471 | SERIAL_WRITE (mips_desc, srec, 8); | |
1472 | ||
1473 | if (SERIAL_READCHAR (mips_desc, 0) >= 0) | |
1474 | break; /* Break immediatly if we get something from | |
c906108c | 1475 | the board. */ |
c5aa993b JM |
1476 | } |
1477 | } | |
1478 | } | |
c906108c SS |
1479 | break; |
1480 | case 4: | |
1481 | mips_error ("Failed to initialize."); | |
1482 | } | |
1483 | ||
1484 | if (mips_expect (mips_monitor_prompt)) | |
1485 | break; | |
1486 | } | |
1487 | ||
1488 | if (mips_monitor != MON_IDT) | |
1489 | { | |
1490 | /* Sometimes PMON ignores the first few characters in the first | |
1491 | command sent after a load. Sending a blank command gets | |
c5aa993b | 1492 | around that. */ |
c906108c SS |
1493 | mips_send_command ("\r", -1); |
1494 | ||
1495 | /* Ensure the correct target state: */ | |
1496 | if (mips_monitor != MON_LSI) | |
1497 | mips_send_command ("set regsize 64\r", -1); | |
1498 | mips_send_command ("set hostport tty0\r", -1); | |
1499 | mips_send_command ("set brkcmd \"\"\r", -1); | |
1500 | /* Delete all the current breakpoints: */ | |
1501 | mips_send_command ("db *\r", -1); | |
1502 | /* NOTE: PMON does not have breakpoint support through the | |
1503 | "debug" mode, only at the monitor command-line. */ | |
1504 | } | |
1505 | ||
1506 | mips_enter_debug (); | |
1507 | ||
1508 | /* Clear all breakpoints: */ | |
1509 | if ((mips_monitor == MON_IDT | |
1510 | && clear_breakpoint (-1, 0, BREAK_UNUSED) == 0) | |
1511 | || mips_monitor == MON_LSI) | |
1512 | monitor_supports_breakpoints = 1; | |
1513 | else | |
1514 | monitor_supports_breakpoints = 0; | |
1515 | ||
1516 | do_cleanups (old_cleanups); | |
1517 | ||
1518 | /* If this doesn't call error, we have connected; we don't care if | |
1519 | the request itself succeeds or fails. */ | |
1520 | ||
1521 | mips_request ('r', (unsigned int) 0, (unsigned int) 0, &err, | |
1522 | mips_receive_wait, NULL); | |
1523 | set_current_frame (create_new_frame (read_fp (), read_pc ())); | |
1524 | select_frame (get_current_frame (), 0); | |
1525 | } | |
1526 | ||
1527 | /* Open a connection to the remote board. */ | |
1528 | static void | |
1529 | common_open (ops, name, from_tty, new_monitor, new_monitor_prompt) | |
1530 | struct target_ops *ops; | |
1531 | char *name; | |
1532 | int from_tty; | |
1533 | enum mips_monitor_type new_monitor; | |
1534 | char *new_monitor_prompt; | |
1535 | { | |
1536 | char *ptype; | |
1537 | char *serial_port_name; | |
1538 | char *remote_name = 0; | |
1539 | char *local_name = 0; | |
1540 | char **argv; | |
1541 | ||
1542 | if (name == 0) | |
1543 | error ( | |
c5aa993b | 1544 | "To open a MIPS remote debugging connection, you need to specify what serial\n\ |
c906108c | 1545 | device is attached to the target board (e.g., /dev/ttya).\n" |
c5aa993b JM |
1546 | "If you want to use TFTP to download to the board, specify the name of a\n" |
1547 | "temporary file to be used by GDB for downloads as the second argument.\n" | |
1548 | "This filename must be in the form host:filename, where host is the name\n" | |
1549 | "of the host running the TFTP server, and the file must be readable by the\n" | |
1550 | "world. If the local name of the temporary file differs from the name as\n" | |
1551 | "seen from the board via TFTP, specify that name as the third parameter.\n"); | |
c906108c SS |
1552 | |
1553 | /* Parse the serial port name, the optional TFTP name, and the | |
1554 | optional local TFTP name. */ | |
1555 | if ((argv = buildargv (name)) == NULL) | |
c5aa993b | 1556 | nomem (0); |
7a292a7a | 1557 | make_cleanup_freeargv (argv); |
c906108c SS |
1558 | |
1559 | serial_port_name = strsave (argv[0]); | |
c5aa993b | 1560 | if (argv[1]) /* remote TFTP name specified? */ |
c906108c SS |
1561 | { |
1562 | remote_name = argv[1]; | |
c5aa993b | 1563 | if (argv[2]) /* local TFTP filename specified? */ |
c906108c SS |
1564 | local_name = argv[2]; |
1565 | } | |
1566 | ||
1567 | target_preopen (from_tty); | |
1568 | ||
1569 | if (mips_is_open) | |
1570 | unpush_target (current_ops); | |
1571 | ||
1572 | /* Open and initialize the serial port. */ | |
1573 | mips_desc = SERIAL_OPEN (serial_port_name); | |
1574 | if (mips_desc == (serial_t) NULL) | |
1575 | perror_with_name (serial_port_name); | |
1576 | ||
1577 | if (baud_rate != -1) | |
1578 | { | |
1579 | if (SERIAL_SETBAUDRATE (mips_desc, baud_rate)) | |
c5aa993b JM |
1580 | { |
1581 | SERIAL_CLOSE (mips_desc); | |
1582 | perror_with_name (serial_port_name); | |
1583 | } | |
c906108c SS |
1584 | } |
1585 | ||
1586 | SERIAL_RAW (mips_desc); | |
1587 | ||
1588 | /* Open and initialize the optional download port. If it is in the form | |
1589 | hostname#portnumber, it's a UDP socket. If it is in the form | |
1590 | hostname:filename, assume it's the TFTP filename that must be | |
1591 | passed to the DDB board to tell it where to get the load file. */ | |
1592 | if (remote_name) | |
1593 | { | |
1594 | if (strchr (remote_name, '#')) | |
1595 | { | |
1596 | udp_desc = SERIAL_OPEN (remote_name); | |
1597 | if (!udp_desc) | |
1598 | perror_with_name ("Unable to open UDP port"); | |
1599 | udp_in_use = 1; | |
1600 | } | |
1601 | else | |
1602 | { | |
1603 | /* Save the remote and local names of the TFTP temp file. If | |
1604 | the user didn't specify a local name, assume it's the same | |
1605 | as the part of the remote name after the "host:". */ | |
1606 | if (tftp_name) | |
1607 | free (tftp_name); | |
1608 | if (tftp_localname) | |
1609 | free (tftp_localname); | |
1610 | if (local_name == NULL) | |
c5aa993b JM |
1611 | if ((local_name = strchr (remote_name, ':')) != NULL) |
1612 | local_name++; /* skip over the colon */ | |
c906108c SS |
1613 | if (local_name == NULL) |
1614 | local_name = remote_name; /* local name same as remote name */ | |
1615 | tftp_name = strsave (remote_name); | |
1616 | tftp_localname = strsave (local_name); | |
1617 | tftp_in_use = 1; | |
1618 | } | |
1619 | } | |
1620 | ||
1621 | current_ops = ops; | |
1622 | mips_is_open = 1; | |
1623 | ||
1624 | /* Reset the expected monitor prompt if it's never been set before. */ | |
1625 | if (mips_monitor_prompt == NULL) | |
1626 | mips_monitor_prompt = strsave (new_monitor_prompt); | |
1627 | mips_monitor = new_monitor; | |
1628 | ||
1629 | mips_initialize (); | |
1630 | ||
1631 | if (from_tty) | |
1632 | printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name); | |
1633 | ||
1634 | /* Switch to using remote target now. */ | |
1635 | push_target (ops); | |
1636 | ||
1637 | /* FIXME: Should we call start_remote here? */ | |
1638 | ||
1639 | /* Try to figure out the processor model if possible. */ | |
1640 | ptype = mips_read_processor_type (); | |
1641 | if (ptype) | |
1642 | mips_set_processor_type_command (strsave (ptype), 0); | |
1643 | ||
1644 | /* This is really the job of start_remote however, that makes an assumption | |
1645 | that the target is about to print out a status message of some sort. That | |
1646 | doesn't happen here (in fact, it may not be possible to get the monitor to | |
1647 | send the appropriate packet). */ | |
1648 | ||
1649 | flush_cached_frames (); | |
1650 | registers_changed (); | |
1651 | stop_pc = read_pc (); | |
1652 | set_current_frame (create_new_frame (read_fp (), stop_pc)); | |
1653 | select_frame (get_current_frame (), 0); | |
1654 | print_stack_frame (selected_frame, -1, 1); | |
1655 | free (serial_port_name); | |
1656 | } | |
1657 | ||
1658 | static void | |
1659 | mips_open (name, from_tty) | |
1660 | char *name; | |
1661 | int from_tty; | |
1662 | { | |
1663 | common_open (&mips_ops, name, from_tty, MON_IDT, TARGET_MONITOR_PROMPT); | |
1664 | } | |
1665 | ||
1666 | static void | |
1667 | pmon_open (name, from_tty) | |
1668 | char *name; | |
1669 | int from_tty; | |
1670 | { | |
1671 | common_open (&pmon_ops, name, from_tty, MON_PMON, "PMON> "); | |
1672 | } | |
1673 | ||
1674 | static void | |
1675 | ddb_open (name, from_tty) | |
1676 | char *name; | |
1677 | int from_tty; | |
1678 | { | |
1679 | common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>"); | |
1680 | } | |
1681 | ||
1682 | static void | |
1683 | lsi_open (name, from_tty) | |
1684 | char *name; | |
1685 | int from_tty; | |
1686 | { | |
1687 | int i; | |
1688 | ||
1689 | /* Clear the LSI breakpoint table. */ | |
1690 | for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) | |
1691 | lsi_breakpoints[i].type = BREAK_UNUSED; | |
c5aa993b | 1692 | |
c906108c SS |
1693 | common_open (&lsi_ops, name, from_tty, MON_LSI, "PMON> "); |
1694 | } | |
1695 | ||
1696 | /* Close a connection to the remote board. */ | |
1697 | ||
1698 | static void | |
1699 | mips_close (quitting) | |
1700 | int quitting; | |
1701 | { | |
1702 | if (mips_is_open) | |
1703 | { | |
1704 | /* Get the board out of remote debugging mode. */ | |
1705 | (void) mips_exit_debug (); | |
1706 | ||
1707 | close_ports (); | |
1708 | } | |
1709 | } | |
1710 | ||
1711 | /* Detach from the remote board. */ | |
1712 | ||
1713 | static void | |
1714 | mips_detach (args, from_tty) | |
1715 | char *args; | |
1716 | int from_tty; | |
1717 | { | |
1718 | if (args) | |
1719 | error ("Argument given to \"detach\" when remotely debugging."); | |
1720 | ||
1721 | pop_target (); | |
1722 | ||
1723 | mips_close (1); | |
1724 | ||
1725 | if (from_tty) | |
1726 | printf_unfiltered ("Ending remote MIPS debugging.\n"); | |
1727 | } | |
1728 | ||
1729 | /* Tell the target board to resume. This does not wait for a reply | |
1730 | from the board, except in the case of single-stepping on LSI boards, | |
1731 | where PMON does return a reply. */ | |
1732 | ||
1733 | static void | |
1734 | mips_resume (pid, step, siggnal) | |
1735 | int pid, step; | |
1736 | enum target_signal siggnal; | |
1737 | { | |
1738 | int err; | |
1739 | ||
1740 | /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after | |
1741 | a single step, so we wait for that. */ | |
1742 | mips_request (step ? 's' : 'c', | |
1743 | (unsigned int) 1, | |
1744 | (unsigned int) siggnal, | |
1745 | mips_monitor == MON_LSI && step ? &err : (int *) NULL, | |
1746 | mips_receive_wait, NULL); | |
1747 | } | |
1748 | ||
1749 | /* Return the signal corresponding to SIG, where SIG is the number which | |
1750 | the MIPS protocol uses for the signal. */ | |
1751 | enum target_signal | |
1752 | mips_signal_from_protocol (sig) | |
1753 | int sig; | |
1754 | { | |
1755 | /* We allow a few more signals than the IDT board actually returns, on | |
1756 | the theory that there is at least *some* hope that perhaps the numbering | |
1757 | for these signals is widely agreed upon. */ | |
1758 | if (sig <= 0 | |
1759 | || sig > 31) | |
1760 | return TARGET_SIGNAL_UNKNOWN; | |
1761 | ||
1762 | /* Don't want to use target_signal_from_host because we are converting | |
1763 | from MIPS signal numbers, not host ones. Our internal numbers | |
1764 | match the MIPS numbers for the signals the board can return, which | |
1765 | are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP. */ | |
1766 | return (enum target_signal) sig; | |
1767 | } | |
1768 | ||
1769 | /* Wait until the remote stops, and return a wait status. */ | |
1770 | ||
1771 | static int | |
1772 | mips_wait (pid, status) | |
1773 | int pid; | |
1774 | struct target_waitstatus *status; | |
1775 | { | |
1776 | int rstatus; | |
1777 | int err; | |
1778 | char buff[DATA_MAXLEN]; | |
1779 | int rpc, rfp, rsp; | |
1780 | char flags[20]; | |
1781 | int nfields; | |
1782 | int i; | |
1783 | ||
1784 | interrupt_count = 0; | |
1785 | hit_watchpoint = 0; | |
1786 | ||
1787 | /* If we have not sent a single step or continue command, then the | |
1788 | board is waiting for us to do something. Return a status | |
1789 | indicating that it is stopped. */ | |
c5aa993b | 1790 | if (!mips_need_reply) |
c906108c SS |
1791 | { |
1792 | status->kind = TARGET_WAITKIND_STOPPED; | |
1793 | status->value.sig = TARGET_SIGNAL_TRAP; | |
1794 | return 0; | |
1795 | } | |
1796 | ||
1797 | /* No timeout; we sit here as long as the program continues to execute. */ | |
1798 | mips_wait_flag = 1; | |
1799 | rstatus = mips_request ('\000', (unsigned int) 0, (unsigned int) 0, &err, -1, | |
1800 | buff); | |
1801 | mips_wait_flag = 0; | |
1802 | if (err) | |
1803 | mips_error ("Remote failure: %s", safe_strerror (errno)); | |
1804 | ||
1805 | /* On returning from a continue, the PMON monitor seems to start | |
1806 | echoing back the messages we send prior to sending back the | |
1807 | ACK. The code can cope with this, but to try and avoid the | |
1808 | unnecessary serial traffic, and "spurious" characters displayed | |
1809 | to the user, we cheat and reset the debug protocol. The problems | |
1810 | seems to be caused by a check on the number of arguments, and the | |
1811 | command length, within the monitor causing it to echo the command | |
1812 | as a bad packet. */ | |
1813 | if (mips_monitor == MON_PMON) | |
1814 | { | |
1815 | mips_exit_debug (); | |
1816 | mips_enter_debug (); | |
1817 | } | |
1818 | ||
1819 | /* See if we got back extended status. If so, pick out the pc, fp, sp, etc... */ | |
1820 | ||
1821 | nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%x 0x%x 0x%x 0x%*x %s", | |
1822 | &rpc, &rfp, &rsp, flags); | |
1823 | if (nfields >= 3) | |
1824 | { | |
1825 | char buf[MAX_REGISTER_RAW_SIZE]; | |
1826 | ||
1827 | store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rpc); | |
1828 | supply_register (PC_REGNUM, buf); | |
1829 | ||
1830 | store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rfp); | |
c5aa993b | 1831 | supply_register (30, buf); /* This register they are avoiding and so it is unnamed */ |
c906108c SS |
1832 | |
1833 | store_unsigned_integer (buf, REGISTER_RAW_SIZE (SP_REGNUM), rsp); | |
1834 | supply_register (SP_REGNUM, buf); | |
1835 | ||
1836 | store_unsigned_integer (buf, REGISTER_RAW_SIZE (FP_REGNUM), 0); | |
1837 | supply_register (FP_REGNUM, buf); | |
1838 | ||
1839 | if (nfields == 9) | |
1840 | { | |
1841 | int i; | |
1842 | ||
1843 | for (i = 0; i <= 2; i++) | |
1844 | if (flags[i] == 'r' || flags[i] == 'w') | |
1845 | hit_watchpoint = 1; | |
1846 | else if (flags[i] == '\000') | |
1847 | break; | |
1848 | } | |
1849 | } | |
1850 | ||
1851 | if (strcmp (target_shortname, "lsi") == 0) | |
1852 | { | |
1853 | #if 0 | |
1854 | /* If this is an LSI PMON target, see if we just hit a hardrdware watchpoint. | |
c5aa993b JM |
1855 | Right now, PMON doesn't give us enough information to determine which |
1856 | breakpoint we hit. So we have to look up the PC in our own table | |
1857 | of breakpoints, and if found, assume it's just a normal instruction | |
1858 | fetch breakpoint, not a data watchpoint. FIXME when PMON | |
1859 | provides some way to tell us what type of breakpoint it is. */ | |
c906108c | 1860 | int i; |
c5aa993b | 1861 | CORE_ADDR pc = read_pc (); |
c906108c SS |
1862 | |
1863 | hit_watchpoint = 1; | |
1864 | for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) | |
1865 | { | |
1866 | if (lsi_breakpoints[i].addr == pc | |
1867 | && lsi_breakpoints[i].type == BREAK_FETCH) | |
1868 | { | |
1869 | hit_watchpoint = 0; | |
1870 | break; | |
1871 | } | |
1872 | } | |
1873 | #else | |
1874 | /* If a data breakpoint was hit, PMON returns the following packet: | |
c5aa993b JM |
1875 | 0x1 c 0x0 0x57f 0x1 |
1876 | The return packet from an ordinary breakpoint doesn't have the | |
1877 | extra 0x01 field tacked onto the end. */ | |
c906108c SS |
1878 | if (nfields == 1 && rpc == 1) |
1879 | hit_watchpoint = 1; | |
1880 | #endif | |
1881 | } | |
1882 | ||
1883 | /* NOTE: The following (sig) numbers are defined by PMON: | |
c5aa993b JM |
1884 | SPP_SIGTRAP 5 breakpoint |
1885 | SPP_SIGINT 2 | |
1886 | SPP_SIGSEGV 11 | |
1887 | SPP_SIGBUS 10 | |
1888 | SPP_SIGILL 4 | |
1889 | SPP_SIGFPE 8 | |
1890 | SPP_SIGTERM 15 */ | |
c906108c SS |
1891 | |
1892 | /* Translate a MIPS waitstatus. We use constants here rather than WTERMSIG | |
1893 | and so on, because the constants we want here are determined by the | |
1894 | MIPS protocol and have nothing to do with what host we are running on. */ | |
1895 | if ((rstatus & 0xff) == 0) | |
1896 | { | |
1897 | status->kind = TARGET_WAITKIND_EXITED; | |
1898 | status->value.integer = (((rstatus) >> 8) & 0xff); | |
1899 | } | |
1900 | else if ((rstatus & 0xff) == 0x7f) | |
1901 | { | |
1902 | status->kind = TARGET_WAITKIND_STOPPED; | |
1903 | status->value.sig = mips_signal_from_protocol (((rstatus) >> 8) & 0xff); | |
1904 | ||
1905 | /* If the stop PC is in the _exit function, assume | |
1906 | we hit the 'break 0x3ff' instruction in _exit, so this | |
c5aa993b | 1907 | is not a normal breakpoint. */ |
c906108c SS |
1908 | if (strcmp (target_shortname, "lsi") == 0) |
1909 | { | |
1910 | char *func_name; | |
1911 | CORE_ADDR func_start; | |
c5aa993b | 1912 | CORE_ADDR pc = read_pc (); |
c906108c SS |
1913 | |
1914 | find_pc_partial_function (pc, &func_name, &func_start, NULL); | |
1915 | if (func_name != NULL && strcmp (func_name, "_exit") == 0 | |
1916 | && func_start == pc) | |
1917 | status->kind = TARGET_WAITKIND_EXITED; | |
1918 | } | |
1919 | } | |
1920 | else | |
1921 | { | |
1922 | status->kind = TARGET_WAITKIND_SIGNALLED; | |
1923 | status->value.sig = mips_signal_from_protocol (rstatus & 0x7f); | |
1924 | } | |
1925 | ||
1926 | return 0; | |
1927 | } | |
1928 | ||
1929 | /* We have to map between the register numbers used by gdb and the | |
1930 | register numbers used by the debugging protocol. This function | |
1931 | assumes that we are using tm-mips.h. */ | |
1932 | ||
1933 | #define REGNO_OFFSET 96 | |
1934 | ||
1935 | static int | |
1936 | mips_map_regno (regno) | |
1937 | int regno; | |
1938 | { | |
1939 | if (regno < 32) | |
1940 | return regno; | |
1941 | if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32) | |
1942 | return regno - FP0_REGNUM + 32; | |
1943 | switch (regno) | |
1944 | { | |
1945 | case PC_REGNUM: | |
1946 | return REGNO_OFFSET + 0; | |
1947 | case CAUSE_REGNUM: | |
1948 | return REGNO_OFFSET + 1; | |
1949 | case HI_REGNUM: | |
1950 | return REGNO_OFFSET + 2; | |
1951 | case LO_REGNUM: | |
1952 | return REGNO_OFFSET + 3; | |
1953 | case FCRCS_REGNUM: | |
1954 | return REGNO_OFFSET + 4; | |
1955 | case FCRIR_REGNUM: | |
1956 | return REGNO_OFFSET + 5; | |
1957 | default: | |
1958 | /* FIXME: Is there a way to get the status register? */ | |
1959 | return 0; | |
1960 | } | |
1961 | } | |
1962 | ||
1963 | /* Fetch the remote registers. */ | |
1964 | ||
1965 | static void | |
1966 | mips_fetch_registers (regno) | |
1967 | int regno; | |
1968 | { | |
1969 | unsigned LONGEST val; | |
1970 | int err; | |
1971 | ||
1972 | if (regno == -1) | |
1973 | { | |
1974 | for (regno = 0; regno < NUM_REGS; regno++) | |
1975 | mips_fetch_registers (regno); | |
1976 | return; | |
1977 | } | |
1978 | ||
1979 | if (regno == FP_REGNUM || regno == ZERO_REGNUM) | |
1980 | /* FP_REGNUM on the mips is a hack which is just supposed to read | |
1981 | zero (see also mips-nat.c). */ | |
1982 | val = 0; | |
1983 | else | |
1984 | { | |
1985 | /* If PMON doesn't support this register, don't waste serial | |
1986 | bandwidth trying to read it. */ | |
1987 | int pmon_reg = mips_map_regno (regno); | |
1988 | if (regno != 0 && pmon_reg == 0) | |
1989 | val = 0; | |
1990 | else | |
1991 | { | |
1992 | /* Unfortunately the PMON version in the Vr4300 board has been | |
1993 | compiled without the 64bit register access commands. This | |
1994 | means we cannot get hold of the full register width. */ | |
1995 | if (mips_monitor == MON_DDB) | |
c5aa993b JM |
1996 | val = (unsigned) mips_request ('t', (unsigned int) pmon_reg, |
1997 | (unsigned int) 0, &err, mips_receive_wait, NULL); | |
c906108c SS |
1998 | else |
1999 | val = mips_request ('r', (unsigned int) pmon_reg, | |
c5aa993b | 2000 | (unsigned int) 0, &err, mips_receive_wait, NULL); |
c906108c SS |
2001 | if (err) |
2002 | mips_error ("Can't read register %d: %s", regno, | |
2003 | safe_strerror (errno)); | |
2004 | } | |
2005 | } | |
2006 | ||
2007 | { | |
2008 | char buf[MAX_REGISTER_RAW_SIZE]; | |
2009 | ||
2010 | /* We got the number the register holds, but gdb expects to see a | |
2011 | value in the target byte ordering. */ | |
2012 | store_unsigned_integer (buf, REGISTER_RAW_SIZE (regno), val); | |
2013 | supply_register (regno, buf); | |
2014 | } | |
2015 | } | |
2016 | ||
2017 | /* Prepare to store registers. The MIPS protocol can store individual | |
2018 | registers, so this function doesn't have to do anything. */ | |
2019 | ||
2020 | static void | |
2021 | mips_prepare_to_store () | |
2022 | { | |
2023 | } | |
2024 | ||
2025 | /* Store remote register(s). */ | |
2026 | ||
2027 | static void | |
2028 | mips_store_registers (regno) | |
2029 | int regno; | |
2030 | { | |
2031 | int err; | |
2032 | ||
2033 | if (regno == -1) | |
2034 | { | |
2035 | for (regno = 0; regno < NUM_REGS; regno++) | |
2036 | mips_store_registers (regno); | |
2037 | return; | |
2038 | } | |
2039 | ||
2040 | mips_request ('R', (unsigned int) mips_map_regno (regno), | |
2041 | read_register (regno), | |
2042 | &err, mips_receive_wait, NULL); | |
2043 | if (err) | |
2044 | mips_error ("Can't write register %d: %s", regno, safe_strerror (errno)); | |
2045 | } | |
2046 | ||
2047 | /* Fetch a word from the target board. */ | |
2048 | ||
c5aa993b | 2049 | static unsigned int |
c906108c SS |
2050 | mips_fetch_word (addr) |
2051 | CORE_ADDR addr; | |
2052 | { | |
2053 | unsigned int val; | |
2054 | int err; | |
2055 | ||
2056 | /* FIXME! addr was cast to uint! */ | |
2057 | val = mips_request ('d', addr, (unsigned int) 0, &err, | |
2058 | mips_receive_wait, NULL); | |
2059 | if (err) | |
2060 | { | |
2061 | /* Data space failed; try instruction space. */ | |
2062 | /* FIXME! addr was cast to uint! */ | |
2063 | val = mips_request ('i', addr, (unsigned int) 0, &err, | |
2064 | mips_receive_wait, NULL); | |
2065 | if (err) | |
c5aa993b JM |
2066 | mips_error ("Can't read address 0x%s: %s", |
2067 | paddr_nz (addr), safe_strerror (errno)); | |
c906108c SS |
2068 | } |
2069 | return val; | |
2070 | } | |
2071 | ||
2072 | /* Store a word to the target board. Returns errno code or zero for | |
2073 | success. If OLD_CONTENTS is non-NULL, put the old contents of that | |
2074 | memory location there. */ | |
2075 | ||
2076 | /* FIXME! make sure only 32-bit quantities get stored! */ | |
2077 | static int | |
2078 | mips_store_word (addr, val, old_contents) | |
2079 | CORE_ADDR addr; | |
2080 | unsigned int val; | |
2081 | char *old_contents; | |
2082 | { | |
2083 | int err; | |
2084 | unsigned int oldcontents; | |
2085 | ||
2086 | oldcontents = mips_request ('D', addr, (unsigned int) val, | |
2087 | &err, | |
2088 | mips_receive_wait, NULL); | |
2089 | if (err) | |
2090 | { | |
2091 | /* Data space failed; try instruction space. */ | |
2092 | oldcontents = mips_request ('I', addr, | |
2093 | (unsigned int) val, &err, | |
2094 | mips_receive_wait, NULL); | |
2095 | if (err) | |
2096 | return errno; | |
2097 | } | |
2098 | if (old_contents != NULL) | |
2099 | store_unsigned_integer (old_contents, 4, oldcontents); | |
2100 | return 0; | |
2101 | } | |
2102 | ||
2103 | /* Read or write LEN bytes from inferior memory at MEMADDR, | |
2104 | transferring to or from debugger address MYADDR. Write to inferior | |
2105 | if SHOULD_WRITE is nonzero. Returns length of data written or | |
2106 | read; 0 for error. Note that protocol gives us the correct value | |
2107 | for a longword, since it transfers values in ASCII. We want the | |
2108 | byte values, so we have to swap the longword values. */ | |
2109 | ||
2110 | static int | |
2111 | mips_xfer_memory (memaddr, myaddr, len, write, ignore) | |
2112 | CORE_ADDR memaddr; | |
2113 | char *myaddr; | |
2114 | int len; | |
2115 | int write; | |
2116 | struct target_ops *ignore; | |
2117 | { | |
2118 | register int i; | |
2119 | /* Round starting address down to longword boundary. */ | |
c5aa993b | 2120 | register CORE_ADDR addr = memaddr & ~3; |
c906108c SS |
2121 | /* Round ending address up; get number of longwords that makes. */ |
2122 | register int count = (((memaddr + len) - addr) + 3) / 4; | |
2123 | /* Allocate buffer of that many longwords. */ | |
2124 | register char *buffer = alloca (count * 4); | |
2125 | ||
2126 | int status; | |
2127 | ||
2128 | if (write) | |
2129 | { | |
2130 | /* Fill start and end extra bytes of buffer with existing data. */ | |
2131 | if (addr != memaddr || len < 4) | |
2132 | { | |
2133 | /* Need part of initial word -- fetch it. */ | |
2134 | store_unsigned_integer (&buffer[0], 4, mips_fetch_word (addr)); | |
2135 | } | |
2136 | ||
2137 | if (count > 1) | |
2138 | { | |
2139 | /* Need part of last word -- fetch it. FIXME: we do this even | |
2140 | if we don't need it. */ | |
2141 | store_unsigned_integer (&buffer[(count - 1) * 4], 4, | |
2142 | mips_fetch_word (addr + (count - 1) * 4)); | |
2143 | } | |
2144 | ||
2145 | /* Copy data to be written over corresponding part of buffer */ | |
2146 | ||
2147 | memcpy ((char *) buffer + (memaddr & 3), myaddr, len); | |
2148 | ||
2149 | /* Write the entire buffer. */ | |
2150 | ||
2151 | for (i = 0; i < count; i++, addr += 4) | |
2152 | { | |
2153 | status = mips_store_word (addr, | |
c5aa993b | 2154 | extract_unsigned_integer (&buffer[i * 4], 4), |
c906108c SS |
2155 | NULL); |
2156 | /* Report each kilobyte (we download 32-bit words at a time) */ | |
c5aa993b | 2157 | if (i % 256 == 255) |
c906108c SS |
2158 | { |
2159 | printf_unfiltered ("*"); | |
2160 | gdb_flush (gdb_stdout); | |
2161 | } | |
2162 | if (status) | |
2163 | { | |
2164 | errno = status; | |
2165 | return 0; | |
2166 | } | |
2167 | /* FIXME: Do we want a QUIT here? */ | |
2168 | } | |
2169 | if (count >= 256) | |
2170 | printf_unfiltered ("\n"); | |
2171 | } | |
2172 | else | |
2173 | { | |
2174 | /* Read all the longwords */ | |
2175 | for (i = 0; i < count; i++, addr += 4) | |
2176 | { | |
c5aa993b | 2177 | store_unsigned_integer (&buffer[i * 4], 4, mips_fetch_word (addr)); |
c906108c SS |
2178 | QUIT; |
2179 | } | |
2180 | ||
2181 | /* Copy appropriate bytes out of the buffer. */ | |
2182 | memcpy (myaddr, buffer + (memaddr & 3), len); | |
2183 | } | |
2184 | return len; | |
2185 | } | |
2186 | ||
2187 | /* Print info on this target. */ | |
2188 | ||
2189 | static void | |
2190 | mips_files_info (ignore) | |
2191 | struct target_ops *ignore; | |
2192 | { | |
2193 | printf_unfiltered ("Debugging a MIPS board over a serial line.\n"); | |
2194 | } | |
2195 | ||
2196 | /* Kill the process running on the board. This will actually only | |
2197 | work if we are doing remote debugging over the console input. I | |
2198 | think that if IDT/sim had the remote debug interrupt enabled on the | |
2199 | right port, we could interrupt the process with a break signal. */ | |
2200 | ||
2201 | static void | |
2202 | mips_kill () | |
2203 | { | |
2204 | if (!mips_wait_flag) | |
2205 | return; | |
2206 | ||
2207 | interrupt_count++; | |
2208 | ||
2209 | if (interrupt_count >= 2) | |
2210 | { | |
2211 | interrupt_count = 0; | |
2212 | ||
2213 | target_terminal_ours (); | |
2214 | ||
2215 | if (query ("Interrupted while waiting for the program.\n\ | |
2216 | Give up (and stop debugging it)? ")) | |
2217 | { | |
2218 | /* Clean up in such a way that mips_close won't try to talk to the | |
2219 | board (it almost surely won't work since we weren't able to talk to | |
2220 | it). */ | |
2221 | mips_wait_flag = 0; | |
c5aa993b | 2222 | close_ports (); |
c906108c SS |
2223 | |
2224 | printf_unfiltered ("Ending remote MIPS debugging.\n"); | |
2225 | target_mourn_inferior (); | |
2226 | ||
2227 | return_to_top_level (RETURN_QUIT); | |
2228 | } | |
2229 | ||
2230 | target_terminal_inferior (); | |
2231 | } | |
2232 | ||
2233 | if (remote_debug > 0) | |
2234 | printf_unfiltered ("Sending break\n"); | |
2235 | ||
2236 | SERIAL_SEND_BREAK (mips_desc); | |
2237 | ||
2238 | #if 0 | |
2239 | if (mips_is_open) | |
2240 | { | |
2241 | char cc; | |
2242 | ||
2243 | /* Send a ^C. */ | |
2244 | cc = '\003'; | |
2245 | SERIAL_WRITE (mips_desc, &cc, 1); | |
2246 | sleep (1); | |
2247 | target_mourn_inferior (); | |
2248 | } | |
2249 | #endif | |
2250 | } | |
2251 | ||
2252 | /* Start running on the target board. */ | |
2253 | ||
2254 | static void | |
2255 | mips_create_inferior (execfile, args, env) | |
2256 | char *execfile; | |
2257 | char *args; | |
2258 | char **env; | |
2259 | { | |
2260 | CORE_ADDR entry_pt; | |
2261 | ||
2262 | if (args && *args) | |
2263 | { | |
2264 | warning ("\ | |
2265 | Can't pass arguments to remote MIPS board; arguments ignored."); | |
2266 | /* And don't try to use them on the next "run" command. */ | |
2267 | execute_command ("set args", 0); | |
2268 | } | |
2269 | ||
2270 | if (execfile == 0 || exec_bfd == 0) | |
2271 | error ("No executable file specified"); | |
2272 | ||
2273 | entry_pt = (CORE_ADDR) bfd_get_start_address (exec_bfd); | |
2274 | ||
2275 | init_wait_for_inferior (); | |
2276 | ||
2277 | /* FIXME: Should we set inferior_pid here? */ | |
2278 | ||
2279 | proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0); | |
2280 | } | |
2281 | ||
2282 | /* Clean up after a process. Actually nothing to do. */ | |
2283 | ||
2284 | static void | |
2285 | mips_mourn_inferior () | |
2286 | { | |
2287 | if (current_ops != NULL) | |
2288 | unpush_target (current_ops); | |
2289 | generic_mourn_inferior (); | |
2290 | } | |
2291 | \f | |
2292 | /* We can write a breakpoint and read the shadow contents in one | |
2293 | operation. */ | |
2294 | ||
2295 | /* Insert a breakpoint. On targets that don't have built-in breakpoint | |
2296 | support, we read the contents of the target location and stash it, | |
2297 | then overwrite it with a breakpoint instruction. ADDR is the target | |
2298 | location in the target machine. CONTENTS_CACHE is a pointer to | |
2299 | memory allocated for saving the target contents. It is guaranteed | |
2300 | by the caller to be long enough to save sizeof BREAKPOINT bytes (this | |
2301 | is accomplished via BREAKPOINT_MAX). */ | |
2302 | ||
2303 | static int | |
2304 | mips_insert_breakpoint (addr, contents_cache) | |
2305 | CORE_ADDR addr; | |
2306 | char *contents_cache; | |
2307 | { | |
2308 | if (monitor_supports_breakpoints) | |
2309 | return set_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH); | |
2310 | else | |
2311 | return memory_insert_breakpoint (addr, contents_cache); | |
2312 | } | |
2313 | ||
2314 | static int | |
2315 | mips_remove_breakpoint (addr, contents_cache) | |
2316 | CORE_ADDR addr; | |
2317 | char *contents_cache; | |
2318 | { | |
2319 | if (monitor_supports_breakpoints) | |
2320 | return clear_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH); | |
2321 | else | |
2322 | return memory_remove_breakpoint (addr, contents_cache); | |
2323 | } | |
2324 | ||
c5aa993b | 2325 | #if 0 /* currently not used */ |
c906108c SS |
2326 | /* PMON does not currently provide support for the debug mode 'b' |
2327 | commands to manipulate breakpoints. However, if we wanted to use | |
2328 | the monitor breakpoints (rather than the GDB BREAK_INSN version) | |
2329 | then this code performs the work needed to leave debug mode, | |
2330 | set/clear the breakpoint, and then return to debug mode. */ | |
2331 | ||
c5aa993b | 2332 | #define PMON_MAX_BP (33) /* 32 SW, 1 HW */ |
c906108c SS |
2333 | static CORE_ADDR mips_pmon_bp_info[PMON_MAX_BP]; |
2334 | /* NOTE: The code relies on this vector being zero-initialised by the system */ | |
2335 | ||
2336 | static int | |
2337 | pmon_insert_breakpoint (addr, contents_cache) | |
2338 | CORE_ADDR addr; | |
2339 | char *contents_cache; | |
2340 | { | |
2341 | int status; | |
2342 | ||
2343 | if (monitor_supports_breakpoints) | |
2344 | { | |
c5aa993b | 2345 | char tbuff[12]; /* space for breakpoint command */ |
c906108c SS |
2346 | int bpnum; |
2347 | CORE_ADDR bpaddr; | |
2348 | ||
2349 | /* PMON does not support debug level breakpoint set/remove: */ | |
2350 | if (mips_exit_debug ()) | |
c5aa993b | 2351 | mips_error ("Failed to exit debug mode"); |
c906108c SS |
2352 | |
2353 | sprintf (tbuff, "b %08x\r", addr); | |
2354 | mips_send_command (tbuff, 0); | |
2355 | ||
2356 | mips_expect ("Bpt "); | |
2357 | ||
2358 | if (!mips_getstring (tbuff, 2)) | |
c5aa993b JM |
2359 | return 1; |
2360 | tbuff[2] = '\0'; /* terminate the string */ | |
c906108c | 2361 | if (sscanf (tbuff, "%d", &bpnum) != 1) |
c5aa993b JM |
2362 | { |
2363 | fprintf_unfiltered (gdb_stderr, | |
2364 | "Invalid decimal breakpoint number from target: %s\n", tbuff); | |
2365 | return 1; | |
2366 | } | |
c906108c SS |
2367 | |
2368 | mips_expect (" = "); | |
2369 | ||
2370 | /* Lead in the hex number we are expecting: */ | |
2371 | tbuff[0] = '0'; | |
2372 | tbuff[1] = 'x'; | |
2373 | ||
2374 | /* FIXME!! only 8 bytes! need to expand for Bfd64; | |
2375 | which targets return 64-bit addresses? PMON returns only 32! */ | |
2376 | if (!mips_getstring (&tbuff[2], 8)) | |
c5aa993b JM |
2377 | return 1; |
2378 | tbuff[10] = '\0'; /* terminate the string */ | |
c906108c SS |
2379 | |
2380 | if (sscanf (tbuff, "0x%08x", &bpaddr) != 1) | |
c5aa993b JM |
2381 | { |
2382 | fprintf_unfiltered (gdb_stderr, | |
2383 | "Invalid hex address from target: %s\n", tbuff); | |
2384 | return 1; | |
2385 | } | |
c906108c SS |
2386 | |
2387 | if (bpnum >= PMON_MAX_BP) | |
c5aa993b JM |
2388 | { |
2389 | fprintf_unfiltered (gdb_stderr, | |
c906108c | 2390 | "Error: Returned breakpoint number %d outside acceptable range (0..%d)\n", |
c5aa993b JM |
2391 | bpnum, PMON_MAX_BP - 1); |
2392 | return 1; | |
2393 | } | |
c906108c SS |
2394 | |
2395 | if (bpaddr != addr) | |
c5aa993b | 2396 | fprintf_unfiltered (gdb_stderr, "Warning: Breakpoint addresses do not match: 0x%x != 0x%x\n", addr, bpaddr); |
c906108c SS |
2397 | |
2398 | mips_pmon_bp_info[bpnum] = bpaddr; | |
2399 | ||
2400 | mips_expect ("\r\n"); | |
2401 | mips_expect (mips_monitor_prompt); | |
2402 | ||
2403 | mips_enter_debug (); | |
2404 | ||
2405 | return 0; | |
2406 | } | |
2407 | ||
2408 | return mips_store_word (addr, BREAK_INSN, contents_cache); | |
2409 | } | |
2410 | ||
2411 | static int | |
2412 | pmon_remove_breakpoint (addr, contents_cache) | |
2413 | CORE_ADDR addr; | |
2414 | char *contents_cache; | |
2415 | { | |
2416 | if (monitor_supports_breakpoints) | |
2417 | { | |
2418 | int bpnum; | |
c5aa993b | 2419 | char tbuff[7]; /* enough for delete breakpoint command */ |
c906108c SS |
2420 | |
2421 | for (bpnum = 0; bpnum < PMON_MAX_BP; bpnum++) | |
c5aa993b JM |
2422 | if (mips_pmon_bp_info[bpnum] == addr) |
2423 | break; | |
c906108c SS |
2424 | |
2425 | if (bpnum >= PMON_MAX_BP) | |
c5aa993b JM |
2426 | { |
2427 | fprintf_unfiltered (gdb_stderr, | |
2428 | "pmon_remove_breakpoint: Failed to find breakpoint at address 0x%s\n", | |
2429 | paddr_nz (addr)); | |
2430 | return 1; | |
2431 | } | |
c906108c SS |
2432 | |
2433 | if (mips_exit_debug ()) | |
c5aa993b | 2434 | mips_error ("Failed to exit debug mode"); |
c906108c SS |
2435 | |
2436 | sprintf (tbuff, "db %02d\r", bpnum); | |
2437 | ||
2438 | mips_send_command (tbuff, -1); | |
2439 | /* NOTE: If the breakpoint does not exist then a "Bpt <dd> not | |
2440 | set" message will be returned. */ | |
2441 | ||
2442 | mips_enter_debug (); | |
2443 | ||
2444 | return 0; | |
2445 | } | |
2446 | ||
2447 | return target_write_memory (addr, contents_cache, BREAK_INSN_SIZE); | |
2448 | } | |
2449 | #endif | |
2450 | ||
2451 | ||
2452 | /* Tell whether this target can support a hardware breakpoint. CNT | |
2453 | is the number of hardware breakpoints already installed. This | |
2454 | implements the TARGET_CAN_USE_HARDWARE_WATCHPOINT macro. */ | |
2455 | ||
2456 | int | |
2457 | remote_mips_can_use_hardware_watchpoint (cnt) | |
2458 | int cnt; | |
2459 | { | |
c5aa993b | 2460 | return cnt < MAX_LSI_BREAKPOINTS && strcmp (target_shortname, "lsi") == 0; |
c906108c SS |
2461 | } |
2462 | ||
2463 | ||
2464 | /* Compute a don't care mask for the region bounding ADDR and ADDR + LEN - 1. | |
2465 | This is used for memory ref breakpoints. */ | |
2466 | ||
2467 | static unsigned long | |
2468 | calculate_mask (addr, len) | |
2469 | CORE_ADDR addr; | |
2470 | int len; | |
2471 | { | |
2472 | unsigned long mask; | |
2473 | int i; | |
2474 | ||
2475 | mask = addr ^ (addr + len - 1); | |
2476 | ||
2477 | for (i = 32; i >= 0; i--) | |
2478 | if (mask == 0) | |
2479 | break; | |
2480 | else | |
2481 | mask >>= 1; | |
2482 | ||
2483 | mask = (unsigned long) 0xffffffff >> i; | |
2484 | ||
2485 | return mask; | |
2486 | } | |
2487 | ||
2488 | ||
2489 | /* Insert a hardware breakpoint. This works only on LSI targets, which | |
2490 | implement ordinary breakpoints using hardware facilities. */ | |
2491 | ||
2492 | int | |
2493 | remote_mips_insert_hw_breakpoint (addr, contents_cache) | |
2494 | CORE_ADDR addr; | |
2495 | char *contents_cache; | |
2496 | { | |
2497 | if (strcmp (target_shortname, "lsi") == 0) | |
2498 | return mips_insert_breakpoint (addr, contents_cache); | |
2499 | else | |
2500 | return -1; | |
2501 | } | |
2502 | ||
2503 | ||
2504 | /* Remove a hardware breakpoint. This works only on LSI targets, which | |
2505 | implement ordinary breakpoints using hardware facilities. */ | |
2506 | ||
2507 | int | |
2508 | remote_mips_remove_hw_breakpoint (addr, contents_cache) | |
2509 | CORE_ADDR addr; | |
2510 | char *contents_cache; | |
2511 | { | |
2512 | if (strcmp (target_shortname, "lsi") == 0) | |
2513 | return mips_remove_breakpoint (addr, contents_cache); | |
2514 | else | |
2515 | return -1; | |
2516 | } | |
2517 | ||
2518 | /* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0 | |
2519 | for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write | |
2520 | watchpoint. */ | |
2521 | ||
2522 | int | |
2523 | remote_mips_set_watchpoint (addr, len, type) | |
2524 | CORE_ADDR addr; | |
2525 | int len; | |
2526 | int type; | |
2527 | { | |
2528 | if (set_breakpoint (addr, len, type)) | |
2529 | return -1; | |
2530 | ||
2531 | return 0; | |
2532 | } | |
2533 | ||
2534 | int | |
2535 | remote_mips_remove_watchpoint (addr, len, type) | |
2536 | CORE_ADDR addr; | |
2537 | int len; | |
2538 | int type; | |
2539 | { | |
2540 | if (clear_breakpoint (addr, len, type)) | |
2541 | return -1; | |
2542 | ||
2543 | return 0; | |
2544 | } | |
2545 | ||
2546 | int | |
d4f3574e | 2547 | remote_mips_stopped_by_watchpoint (void) |
c906108c SS |
2548 | { |
2549 | return hit_watchpoint; | |
2550 | } | |
2551 | ||
2552 | ||
2553 | /* Insert a breakpoint. */ | |
2554 | ||
2555 | static int | |
2556 | set_breakpoint (addr, len, type) | |
2557 | CORE_ADDR addr; | |
2558 | int len; | |
2559 | enum break_type type; | |
2560 | { | |
2561 | return common_breakpoint (1, addr, len, type); | |
2562 | } | |
2563 | ||
2564 | ||
2565 | /* Clear a breakpoint. */ | |
2566 | ||
2567 | static int | |
2568 | clear_breakpoint (addr, len, type) | |
2569 | CORE_ADDR addr; | |
2570 | int len; | |
2571 | enum break_type type; | |
2572 | { | |
2573 | return common_breakpoint (0, addr, len, type); | |
2574 | } | |
2575 | ||
2576 | ||
2577 | /* Check the error code from the return packet for an LSI breakpoint | |
2578 | command. If there's no error, just return 0. If it's a warning, | |
2579 | print the warning text and return 0. If it's an error, print | |
2580 | the error text and return 1. <ADDR> is the address of the breakpoint | |
2581 | that was being set. <RERRFLG> is the error code returned by PMON. | |
2582 | This is a helper function for common_breakpoint. */ | |
2583 | ||
2584 | static int | |
2585 | check_lsi_error (addr, rerrflg) | |
2586 | CORE_ADDR addr; | |
2587 | int rerrflg; | |
2588 | { | |
2589 | struct lsi_error *err; | |
2590 | char *saddr = paddr_nz (addr); /* printable address string */ | |
2591 | ||
2592 | if (rerrflg == 0) /* no error */ | |
2593 | return 0; | |
2594 | ||
2595 | /* Warnings can be ORed together, so check them all. */ | |
2596 | if (rerrflg & W_WARN) | |
2597 | { | |
2598 | if (monitor_warnings) | |
2599 | { | |
2600 | int found = 0; | |
2601 | for (err = lsi_warning_table; err->code != 0; err++) | |
2602 | { | |
2603 | if ((err->code & rerrflg) == err->code) | |
2604 | { | |
2605 | found = 1; | |
2606 | fprintf_unfiltered (gdb_stderr, | |
c5aa993b | 2607 | "common_breakpoint (0x%s): Warning: %s\n", |
c906108c SS |
2608 | saddr, |
2609 | err->string); | |
2610 | } | |
2611 | } | |
2612 | if (!found) | |
2613 | fprintf_unfiltered (gdb_stderr, | |
c5aa993b | 2614 | "common_breakpoint (0x%s): Unknown warning: 0x%x\n", |
c906108c SS |
2615 | saddr, |
2616 | rerrflg); | |
2617 | } | |
2618 | return 0; | |
2619 | } | |
2620 | ||
2621 | /* Errors are unique, i.e. can't be ORed together. */ | |
2622 | for (err = lsi_error_table; err->code != 0; err++) | |
2623 | { | |
2624 | if ((err->code & rerrflg) == err->code) | |
2625 | { | |
2626 | fprintf_unfiltered (gdb_stderr, | |
2627 | "common_breakpoint (0x%s): Error: %s\n", | |
2628 | saddr, | |
2629 | err->string); | |
2630 | return 1; | |
2631 | } | |
2632 | } | |
2633 | fprintf_unfiltered (gdb_stderr, | |
2634 | "common_breakpoint (0x%s): Unknown error: 0x%x\n", | |
2635 | saddr, | |
2636 | rerrflg); | |
2637 | return 1; | |
2638 | } | |
2639 | ||
2640 | ||
2641 | /* This routine sends a breakpoint command to the remote target. | |
2642 | ||
2643 | <SET> is 1 if setting a breakpoint, or 0 if clearing a breakpoint. | |
2644 | <ADDR> is the address of the breakpoint. | |
2645 | <LEN> the length of the region to break on. | |
2646 | <TYPE> is the type of breakpoint: | |
c5aa993b JM |
2647 | 0 = write (BREAK_WRITE) |
2648 | 1 = read (BREAK_READ) | |
2649 | 2 = read/write (BREAK_ACCESS) | |
2650 | 3 = instruction fetch (BREAK_FETCH) | |
c906108c SS |
2651 | |
2652 | Return 0 if successful; otherwise 1. */ | |
2653 | ||
2654 | static int | |
2655 | common_breakpoint (set, addr, len, type) | |
2656 | int set; | |
2657 | CORE_ADDR addr; | |
2658 | int len; | |
2659 | enum break_type type; | |
2660 | { | |
2661 | char buf[DATA_MAXLEN + 1]; | |
2662 | char cmd, rcmd; | |
2663 | int rpid, rerrflg, rresponse, rlen; | |
2664 | int nfields; | |
2665 | ||
2666 | addr = ADDR_BITS_REMOVE (addr); | |
2667 | ||
2668 | if (mips_monitor == MON_LSI) | |
2669 | { | |
c5aa993b | 2670 | if (set == 0) /* clear breakpoint */ |
c906108c SS |
2671 | { |
2672 | /* The LSI PMON "clear breakpoint" has this form: | |
c5aa993b JM |
2673 | <pid> 'b' <bptn> 0x0 |
2674 | reply: | |
2675 | <pid> 'b' 0x0 <code> | |
c906108c SS |
2676 | |
2677 | <bptn> is a breakpoint number returned by an earlier 'B' command. | |
2678 | Possible return codes: OK, E_BPT. */ | |
2679 | ||
2680 | int i; | |
2681 | ||
2682 | /* Search for the breakpoint in the table. */ | |
2683 | for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) | |
2684 | if (lsi_breakpoints[i].type == type | |
2685 | && lsi_breakpoints[i].addr == addr | |
2686 | && lsi_breakpoints[i].len == len) | |
2687 | break; | |
2688 | ||
2689 | /* Clear the table entry and tell PMON to clear the breakpoint. */ | |
2690 | if (i == MAX_LSI_BREAKPOINTS) | |
2691 | { | |
2692 | warning ("common_breakpoint: Attempt to clear bogus breakpoint at %s\n", | |
2693 | paddr_nz (addr)); | |
2694 | return 1; | |
2695 | } | |
2696 | ||
2697 | lsi_breakpoints[i].type = BREAK_UNUSED; | |
2698 | sprintf (buf, "0x0 b 0x%x 0x0", i); | |
2699 | mips_send_packet (buf, 1); | |
2700 | ||
2701 | rlen = mips_receive_packet (buf, 1, mips_receive_wait); | |
2702 | buf[rlen] = '\0'; | |
2703 | ||
2704 | nfields = sscanf (buf, "0x%x b 0x0 0x%x", &rpid, &rerrflg); | |
2705 | if (nfields != 2) | |
2706 | mips_error ("common_breakpoint: Bad response from remote board: %s", buf); | |
2707 | ||
2708 | return (check_lsi_error (addr, rerrflg)); | |
2709 | } | |
c5aa993b JM |
2710 | else |
2711 | /* set a breakpoint */ | |
c906108c SS |
2712 | { |
2713 | /* The LSI PMON "set breakpoint" command has this form: | |
c5aa993b JM |
2714 | <pid> 'B' <addr> 0x0 |
2715 | reply: | |
2716 | <pid> 'B' <bptn> <code> | |
c906108c SS |
2717 | |
2718 | The "set data breakpoint" command has this form: | |
2719 | ||
c5aa993b | 2720 | <pid> 'A' <addr1> <type> [<addr2> [<value>]] |
c906108c | 2721 | |
c5aa993b JM |
2722 | where: type= "0x1" = read |
2723 | "0x2" = write | |
2724 | "0x3" = access (read or write) | |
c906108c SS |
2725 | |
2726 | The reply returns two values: | |
c5aa993b JM |
2727 | bptn - a breakpoint number, which is a small integer with |
2728 | possible values of zero through 255. | |
2729 | code - an error return code, a value of zero indicates a | |
2730 | succesful completion, other values indicate various | |
2731 | errors and warnings. | |
2732 | ||
c906108c SS |
2733 | Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON. |
2734 | ||
c5aa993b | 2735 | */ |
c906108c SS |
2736 | |
2737 | if (type == BREAK_FETCH) /* instruction breakpoint */ | |
2738 | { | |
2739 | cmd = 'B'; | |
2740 | sprintf (buf, "0x0 B 0x%s 0x0", paddr_nz (addr)); | |
2741 | } | |
c5aa993b JM |
2742 | else |
2743 | /* watchpoint */ | |
c906108c SS |
2744 | { |
2745 | cmd = 'A'; | |
2746 | sprintf (buf, "0x0 A 0x%s 0x%x 0x%s", paddr_nz (addr), | |
c5aa993b | 2747 | type == BREAK_READ ? 1 : (type == BREAK_WRITE ? 2 : 3), |
c906108c SS |
2748 | paddr_nz (addr + len - 1)); |
2749 | } | |
2750 | mips_send_packet (buf, 1); | |
2751 | ||
2752 | rlen = mips_receive_packet (buf, 1, mips_receive_wait); | |
2753 | buf[rlen] = '\0'; | |
2754 | ||
2755 | nfields = sscanf (buf, "0x%x %c 0x%x 0x%x", | |
2756 | &rpid, &rcmd, &rresponse, &rerrflg); | |
2757 | if (nfields != 4 || rcmd != cmd || rresponse > 255) | |
2758 | mips_error ("common_breakpoint: Bad response from remote board: %s", buf); | |
2759 | ||
2760 | if (rerrflg != 0) | |
2761 | if (check_lsi_error (addr, rerrflg)) | |
2762 | return 1; | |
2763 | ||
2764 | /* rresponse contains PMON's breakpoint number. Record the | |
2765 | information for this breakpoint so we can clear it later. */ | |
2766 | lsi_breakpoints[rresponse].type = type; | |
2767 | lsi_breakpoints[rresponse].addr = addr; | |
c5aa993b | 2768 | lsi_breakpoints[rresponse].len = len; |
c906108c SS |
2769 | |
2770 | return 0; | |
2771 | } | |
2772 | } | |
2773 | else | |
2774 | { | |
2775 | /* On non-LSI targets, the breakpoint command has this form: | |
c5aa993b JM |
2776 | 0x0 <CMD> <ADDR> <MASK> <FLAGS> |
2777 | <MASK> is a don't care mask for addresses. | |
2778 | <FLAGS> is any combination of `r', `w', or `f' for read/write/fetch. | |
c906108c SS |
2779 | */ |
2780 | unsigned long mask; | |
2781 | ||
2782 | mask = calculate_mask (addr, len); | |
2783 | addr &= ~mask; | |
2784 | ||
c5aa993b JM |
2785 | if (set) /* set a breakpoint */ |
2786 | { | |
c906108c SS |
2787 | char *flags; |
2788 | switch (type) | |
2789 | { | |
c5aa993b | 2790 | case BREAK_WRITE: /* write */ |
c906108c SS |
2791 | flags = "w"; |
2792 | break; | |
c5aa993b | 2793 | case BREAK_READ: /* read */ |
c906108c SS |
2794 | flags = "r"; |
2795 | break; | |
c5aa993b | 2796 | case BREAK_ACCESS: /* read/write */ |
c906108c SS |
2797 | flags = "rw"; |
2798 | break; | |
c5aa993b | 2799 | case BREAK_FETCH: /* fetch */ |
c906108c SS |
2800 | flags = "f"; |
2801 | break; | |
2802 | default: | |
2803 | abort (); | |
2804 | } | |
2805 | ||
2806 | cmd = 'B'; | |
2807 | sprintf (buf, "0x0 B 0x%s 0x%s %s", paddr_nz (addr), | |
2808 | paddr_nz (mask), flags); | |
2809 | } | |
2810 | else | |
2811 | { | |
2812 | cmd = 'b'; | |
2813 | sprintf (buf, "0x0 b 0x%s", paddr_nz (addr)); | |
2814 | } | |
2815 | ||
2816 | mips_send_packet (buf, 1); | |
2817 | ||
2818 | rlen = mips_receive_packet (buf, 1, mips_receive_wait); | |
2819 | buf[rlen] = '\0'; | |
2820 | ||
2821 | nfields = sscanf (buf, "0x%x %c 0x%x 0x%x", | |
2822 | &rpid, &rcmd, &rerrflg, &rresponse); | |
2823 | ||
2824 | if (nfields != 4 || rcmd != cmd) | |
2825 | mips_error ("common_breakpoint: Bad response from remote board: %s", | |
2826 | buf); | |
2827 | ||
2828 | if (rerrflg != 0) | |
2829 | { | |
2830 | /* Ddb returns "0x0 b 0x16 0x0\000", whereas | |
2831 | Cogent returns "0x0 b 0xffffffff 0x16\000": */ | |
2832 | if (mips_monitor == MON_DDB) | |
2833 | rresponse = rerrflg; | |
c5aa993b | 2834 | if (rresponse != 22) /* invalid argument */ |
c906108c | 2835 | fprintf_unfiltered (gdb_stderr, |
c5aa993b | 2836 | "common_breakpoint (0x%s): Got error: 0x%x\n", |
c906108c SS |
2837 | paddr_nz (addr), rresponse); |
2838 | return 1; | |
2839 | } | |
2840 | } | |
2841 | return 0; | |
2842 | } | |
2843 | \f | |
2844 | static void | |
2845 | send_srec (srec, len, addr) | |
2846 | char *srec; | |
2847 | int len; | |
2848 | CORE_ADDR addr; | |
2849 | { | |
2850 | while (1) | |
2851 | { | |
2852 | int ch; | |
2853 | ||
2854 | SERIAL_WRITE (mips_desc, srec, len); | |
2855 | ||
2856 | ch = mips_readchar (2); | |
2857 | ||
2858 | switch (ch) | |
2859 | { | |
2860 | case SERIAL_TIMEOUT: | |
2861 | error ("Timeout during download."); | |
2862 | break; | |
2863 | case 0x6: /* ACK */ | |
2864 | return; | |
2865 | case 0x15: /* NACK */ | |
d4f3574e | 2866 | fprintf_unfiltered (gdb_stderr, "Download got a NACK at byte %s! Retrying.\n", paddr_u (addr)); |
c906108c SS |
2867 | continue; |
2868 | default: | |
2869 | error ("Download got unexpected ack char: 0x%x, retrying.\n", ch); | |
2870 | } | |
2871 | } | |
2872 | } | |
2873 | ||
2874 | /* Download a binary file by converting it to S records. */ | |
2875 | ||
2876 | static void | |
2877 | mips_load_srec (args) | |
2878 | char *args; | |
2879 | { | |
2880 | bfd *abfd; | |
2881 | asection *s; | |
2882 | char *buffer, srec[1024]; | |
2883 | unsigned int i; | |
2884 | unsigned int srec_frame = 200; | |
2885 | int reclen; | |
2886 | static int hashmark = 1; | |
2887 | ||
2888 | buffer = alloca (srec_frame * 2 + 256); | |
2889 | ||
2890 | abfd = bfd_openr (args, 0); | |
2891 | if (!abfd) | |
2892 | { | |
2893 | printf_filtered ("Unable to open file %s\n", args); | |
2894 | return; | |
2895 | } | |
2896 | ||
2897 | if (bfd_check_format (abfd, bfd_object) == 0) | |
2898 | { | |
2899 | printf_filtered ("File is not an object file\n"); | |
2900 | return; | |
2901 | } | |
2902 | ||
2903 | /* This actually causes a download in the IDT binary format: */ | |
2904 | mips_send_command (LOAD_CMD, 0); | |
2905 | ||
2906 | for (s = abfd->sections; s; s = s->next) | |
2907 | { | |
2908 | if (s->flags & SEC_LOAD) | |
2909 | { | |
2910 | unsigned int numbytes; | |
2911 | ||
d4f3574e SS |
2912 | /* FIXME! vma too small????? */ |
2913 | printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s->name, | |
2914 | (long) s->vma, | |
2915 | (long) (s->vma + s->_raw_size)); | |
c906108c SS |
2916 | gdb_flush (gdb_stdout); |
2917 | ||
2918 | for (i = 0; i < s->_raw_size; i += numbytes) | |
2919 | { | |
2920 | numbytes = min (srec_frame, s->_raw_size - i); | |
2921 | ||
2922 | bfd_get_section_contents (abfd, s, buffer, i, numbytes); | |
2923 | ||
2924 | reclen = mips_make_srec (srec, '3', s->vma + i, buffer, numbytes); | |
2925 | send_srec (srec, reclen, s->vma + i); | |
2926 | ||
2927 | if (hashmark) | |
2928 | { | |
2929 | putchar_unfiltered ('#'); | |
2930 | gdb_flush (gdb_stdout); | |
2931 | } | |
2932 | ||
c5aa993b JM |
2933 | } /* Per-packet (or S-record) loop */ |
2934 | ||
c906108c | 2935 | putchar_unfiltered ('\n'); |
c5aa993b | 2936 | } /* Loadable sections */ |
c906108c | 2937 | } |
c5aa993b | 2938 | if (hashmark) |
c906108c | 2939 | putchar_unfiltered ('\n'); |
c5aa993b | 2940 | |
c906108c SS |
2941 | /* Write a type 7 terminator record. no data for a type 7, and there |
2942 | is no data, so len is 0. */ | |
2943 | ||
2944 | reclen = mips_make_srec (srec, '7', abfd->start_address, NULL, 0); | |
2945 | ||
2946 | send_srec (srec, reclen, abfd->start_address); | |
2947 | ||
2948 | SERIAL_FLUSH_INPUT (mips_desc); | |
2949 | } | |
2950 | ||
2951 | /* | |
2952 | * mips_make_srec -- make an srecord. This writes each line, one at a | |
c5aa993b JM |
2953 | * time, each with it's own header and trailer line. |
2954 | * An srecord looks like this: | |
c906108c SS |
2955 | * |
2956 | * byte count-+ address | |
2957 | * start ---+ | | data +- checksum | |
c5aa993b JM |
2958 | * | | | | |
2959 | * S01000006F6B692D746573742E73726563E4 | |
2960 | * S315000448600000000000000000FC00005900000000E9 | |
2961 | * S31A0004000023C1400037DE00F023604000377B009020825000348D | |
2962 | * S30B0004485A0000000000004E | |
2963 | * S70500040000F6 | |
c906108c | 2964 | * |
c5aa993b | 2965 | * S<type><length><address><data><checksum> |
c906108c SS |
2966 | * |
2967 | * Where | |
2968 | * - length | |
2969 | * is the number of bytes following upto the checksum. Note that | |
2970 | * this is not the number of chars following, since it takes two | |
2971 | * chars to represent a byte. | |
2972 | * - type | |
2973 | * is one of: | |
2974 | * 0) header record | |
2975 | * 1) two byte address data record | |
2976 | * 2) three byte address data record | |
2977 | * 3) four byte address data record | |
2978 | * 7) four byte address termination record | |
2979 | * 8) three byte address termination record | |
2980 | * 9) two byte address termination record | |
2981 | * | |
2982 | * - address | |
2983 | * is the start address of the data following, or in the case of | |
2984 | * a termination record, the start address of the image | |
2985 | * - data | |
2986 | * is the data. | |
2987 | * - checksum | |
c5aa993b | 2988 | * is the sum of all the raw byte data in the record, from the length |
c906108c SS |
2989 | * upwards, modulo 256 and subtracted from 255. |
2990 | * | |
2991 | * This routine returns the length of the S-record. | |
2992 | * | |
2993 | */ | |
2994 | ||
2995 | static int | |
2996 | mips_make_srec (buf, type, memaddr, myaddr, len) | |
2997 | char *buf; | |
2998 | int type; | |
2999 | CORE_ADDR memaddr; | |
3000 | unsigned char *myaddr; | |
3001 | int len; | |
3002 | { | |
3003 | unsigned char checksum; | |
3004 | int i; | |
3005 | ||
3006 | /* Create the header for the srec. addr_size is the number of bytes in the address, | |
3007 | and 1 is the number of bytes in the count. */ | |
3008 | ||
3009 | /* FIXME!! bigger buf required for 64-bit! */ | |
3010 | buf[0] = 'S'; | |
3011 | buf[1] = type; | |
3012 | buf[2] = len + 4 + 1; /* len + 4 byte address + 1 byte checksum */ | |
3013 | /* This assumes S3 style downloads (4byte addresses). There should | |
3014 | probably be a check, or the code changed to make it more | |
3015 | explicit. */ | |
3016 | buf[3] = memaddr >> 24; | |
3017 | buf[4] = memaddr >> 16; | |
3018 | buf[5] = memaddr >> 8; | |
3019 | buf[6] = memaddr; | |
3020 | memcpy (&buf[7], myaddr, len); | |
3021 | ||
3022 | /* Note that the checksum is calculated on the raw data, not the | |
3023 | hexified data. It includes the length, address and the data | |
3024 | portions of the packet. */ | |
3025 | checksum = 0; | |
3026 | buf += 2; /* Point at length byte */ | |
3027 | for (i = 0; i < len + 4 + 1; i++) | |
3028 | checksum += *buf++; | |
3029 | ||
3030 | *buf = ~checksum; | |
3031 | ||
3032 | return len + 8; | |
3033 | } | |
3034 | ||
3035 | /* The following manifest controls whether we enable the simple flow | |
3036 | control support provided by the monitor. If enabled the code will | |
3037 | wait for an affirmative ACK between transmitting packets. */ | |
3038 | #define DOETXACK (1) | |
3039 | ||
3040 | /* The PMON fast-download uses an encoded packet format constructed of | |
3041 | 3byte data packets (encoded as 4 printable ASCII characters), and | |
3042 | escape sequences (preceded by a '/'): | |
3043 | ||
c5aa993b JM |
3044 | 'K' clear checksum |
3045 | 'C' compare checksum (12bit value, not included in checksum calculation) | |
3046 | 'S' define symbol name (for addr) terminated with "," and padded to 4char boundary | |
3047 | 'Z' zero fill multiple of 3bytes | |
3048 | 'B' byte (12bit encoded value, of 8bit data) | |
3049 | 'A' address (36bit encoded value) | |
3050 | 'E' define entry as original address, and exit load | |
c906108c SS |
3051 | |
3052 | The packets are processed in 4 character chunks, so the escape | |
3053 | sequences that do not have any data (or variable length data) | |
3054 | should be padded to a 4 character boundary. The decoder will give | |
3055 | an error if the complete message block size is not a multiple of | |
3056 | 4bytes (size of record). | |
3057 | ||
3058 | The encoding of numbers is done in 6bit fields. The 6bit value is | |
3059 | used to index into this string to get the specific character | |
3060 | encoding for the value: */ | |
3061 | static char encoding[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,."; | |
3062 | ||
3063 | /* Convert the number of bits required into an encoded number, 6bits | |
3064 | at a time (range 0..63). Keep a checksum if required (passed | |
3065 | pointer non-NULL). The function returns the number of encoded | |
3066 | characters written into the buffer. */ | |
3067 | static int | |
3068 | pmon_makeb64 (v, p, n, chksum) | |
3069 | unsigned long v; | |
3070 | char *p; | |
3071 | int n; | |
3072 | int *chksum; | |
3073 | { | |
3074 | int count = (n / 6); | |
3075 | ||
c5aa993b JM |
3076 | if ((n % 12) != 0) |
3077 | { | |
3078 | fprintf_unfiltered (gdb_stderr, | |
3079 | "Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n", n, (n == 1) ? "" : "s"); | |
3080 | return (0); | |
3081 | } | |
3082 | if (n > 36) | |
3083 | { | |
3084 | fprintf_unfiltered (gdb_stderr, | |
3085 | "Fast encoding cannot process more than 36bits at the moment: %dbits\n", n); | |
3086 | return (0); | |
3087 | } | |
c906108c SS |
3088 | |
3089 | /* Deal with the checksum: */ | |
c5aa993b JM |
3090 | if (chksum != NULL) |
3091 | { | |
3092 | switch (n) | |
3093 | { | |
3094 | case 36: | |
3095 | *chksum += ((v >> 24) & 0xFFF); | |
3096 | case 24: | |
3097 | *chksum += ((v >> 12) & 0xFFF); | |
3098 | case 12: | |
3099 | *chksum += ((v >> 0) & 0xFFF); | |
3100 | } | |
c906108c | 3101 | } |
c906108c | 3102 | |
c5aa993b JM |
3103 | do |
3104 | { | |
3105 | n -= 6; | |
3106 | *p++ = encoding[(v >> n) & 0x3F]; | |
3107 | } | |
3108 | while (n > 0); | |
c906108c | 3109 | |
c5aa993b | 3110 | return (count); |
c906108c SS |
3111 | } |
3112 | ||
3113 | /* Shorthand function (that could be in-lined) to output the zero-fill | |
3114 | escape sequence into the data stream. */ | |
3115 | static int | |
3116 | pmon_zeroset (recsize, buff, amount, chksum) | |
3117 | int recsize; | |
3118 | char **buff; | |
3119 | int *amount; | |
3120 | unsigned int *chksum; | |
3121 | { | |
3122 | int count; | |
3123 | ||
c5aa993b | 3124 | sprintf (*buff, "/Z"); |
c906108c SS |
3125 | count = pmon_makeb64 (*amount, (*buff + 2), 12, chksum); |
3126 | *buff += (count + 2); | |
3127 | *amount = 0; | |
c5aa993b | 3128 | return (recsize + count + 2); |
c906108c SS |
3129 | } |
3130 | ||
3131 | static int | |
3132 | pmon_checkset (recsize, buff, value) | |
3133 | int recsize; | |
3134 | char **buff; | |
3135 | int *value; | |
3136 | { | |
3137 | int count; | |
3138 | ||
3139 | /* Add the checksum (without updating the value): */ | |
3140 | sprintf (*buff, "/C"); | |
3141 | count = pmon_makeb64 (*value, (*buff + 2), 12, NULL); | |
3142 | *buff += (count + 2); | |
3143 | sprintf (*buff, "\n"); | |
c5aa993b | 3144 | *buff += 2; /* include zero terminator */ |
c906108c SS |
3145 | /* Forcing a checksum validation clears the sum: */ |
3146 | *value = 0; | |
c5aa993b | 3147 | return (recsize + count + 3); |
c906108c SS |
3148 | } |
3149 | ||
3150 | /* Amount of padding we leave after at the end of the output buffer, | |
3151 | for the checksum and line termination characters: */ | |
3152 | #define CHECKSIZE (4 + 4 + 4 + 2) | |
3153 | /* zero-fill, checksum, transfer end and line termination space. */ | |
3154 | ||
3155 | /* The amount of binary data loaded from the object file in a single | |
3156 | operation: */ | |
3157 | #define BINCHUNK (1024) | |
3158 | ||
3159 | /* Maximum line of data accepted by the monitor: */ | |
3160 | #define MAXRECSIZE (550) | |
3161 | /* NOTE: This constant depends on the monitor being used. This value | |
3162 | is for PMON 5.x on the Cogent Vr4300 board. */ | |
3163 | ||
3164 | static void | |
3165 | pmon_make_fastrec (outbuf, inbuf, inptr, inamount, recsize, csum, zerofill) | |
3166 | char **outbuf; | |
3167 | unsigned char *inbuf; | |
3168 | int *inptr; | |
3169 | int inamount; | |
3170 | int *recsize; | |
3171 | unsigned int *csum; | |
3172 | unsigned int *zerofill; | |
3173 | { | |
3174 | int count = 0; | |
3175 | char *p = *outbuf; | |
3176 | ||
3177 | /* This is a simple check to ensure that our data will fit within | |
3178 | the maximum allowable record size. Each record output is 4bytes | |
3179 | in length. We must allow space for a pending zero fill command, | |
3180 | the record, and a checksum record. */ | |
c5aa993b JM |
3181 | while ((*recsize < (MAXRECSIZE - CHECKSIZE)) && ((inamount - *inptr) > 0)) |
3182 | { | |
3183 | /* Process the binary data: */ | |
3184 | if ((inamount - *inptr) < 3) | |
3185 | { | |
3186 | if (*zerofill != 0) | |
3187 | *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); | |
3188 | sprintf (p, "/B"); | |
3189 | count = pmon_makeb64 (inbuf[*inptr], &p[2], 12, csum); | |
3190 | p += (2 + count); | |
3191 | *recsize += (2 + count); | |
3192 | (*inptr)++; | |
3193 | } | |
3194 | else | |
3195 | { | |
3196 | unsigned int value = ((inbuf[*inptr + 0] << 16) | (inbuf[*inptr + 1] << 8) | inbuf[*inptr + 2]); | |
3197 | /* Simple check for zero data. TODO: A better check would be | |
3198 | to check the last, and then the middle byte for being zero | |
3199 | (if the first byte is not). We could then check for | |
3200 | following runs of zeros, and if above a certain size it is | |
3201 | worth the 4 or 8 character hit of the byte insertions used | |
3202 | to pad to the start of the zeroes. NOTE: This also depends | |
3203 | on the alignment at the end of the zero run. */ | |
3204 | if (value == 0x00000000) | |
3205 | { | |
3206 | (*zerofill)++; | |
3207 | if (*zerofill == 0xFFF) /* 12bit counter */ | |
3208 | *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); | |
3209 | } | |
3210 | else | |
3211 | { | |
3212 | if (*zerofill != 0) | |
3213 | *recsize = pmon_zeroset (*recsize, &p, zerofill, csum); | |
3214 | count = pmon_makeb64 (value, p, 24, csum); | |
3215 | p += count; | |
3216 | *recsize += count; | |
3217 | } | |
3218 | *inptr += 3; | |
3219 | } | |
c906108c | 3220 | } |
c906108c SS |
3221 | |
3222 | *outbuf = p; | |
3223 | return; | |
3224 | } | |
3225 | ||
3226 | static int | |
c5aa993b | 3227 | pmon_check_ack (mesg) |
c906108c SS |
3228 | char *mesg; |
3229 | { | |
3230 | #if defined(DOETXACK) | |
3231 | int c; | |
3232 | ||
3233 | if (!tftp_in_use) | |
3234 | { | |
3235 | c = SERIAL_READCHAR (udp_in_use ? udp_desc : mips_desc, 2); | |
3236 | if ((c == SERIAL_TIMEOUT) || (c != 0x06)) | |
3237 | { | |
3238 | fprintf_unfiltered (gdb_stderr, | |
3239 | "Failed to receive valid ACK for %s\n", mesg); | |
c5aa993b | 3240 | return (-1); /* terminate the download */ |
c906108c SS |
3241 | } |
3242 | } | |
3243 | #endif /* DOETXACK */ | |
c5aa993b | 3244 | return (0); |
c906108c SS |
3245 | } |
3246 | ||
3247 | /* pmon_download - Send a sequence of characters to the PMON download port, | |
3248 | which is either a serial port or a UDP socket. */ | |
3249 | ||
3250 | static void | |
3251 | pmon_start_download () | |
3252 | { | |
3253 | if (tftp_in_use) | |
3254 | { | |
3255 | /* Create the temporary download file. */ | |
3256 | if ((tftp_file = fopen (tftp_localname, "w")) == NULL) | |
3257 | perror_with_name (tftp_localname); | |
3258 | } | |
3259 | else | |
3260 | { | |
3261 | mips_send_command (udp_in_use ? LOAD_CMD_UDP : LOAD_CMD, 0); | |
3262 | mips_expect ("Downloading from "); | |
3263 | mips_expect (udp_in_use ? "udp" : "tty0"); | |
3264 | mips_expect (", ^C to abort\r\n"); | |
3265 | } | |
3266 | } | |
3267 | ||
3268 | static int | |
3269 | mips_expect_download (char *string) | |
3270 | { | |
3271 | if (!mips_expect (string)) | |
3272 | { | |
3273 | fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n"); | |
3274 | if (tftp_in_use) | |
3275 | remove (tftp_localname); /* Remove temporary file */ | |
3276 | return 0; | |
3277 | } | |
3278 | else | |
3279 | return 1; | |
3280 | } | |
3281 | ||
3282 | static void | |
3283 | pmon_end_download (final, bintotal) | |
3284 | int final; | |
3285 | int bintotal; | |
3286 | { | |
c5aa993b | 3287 | char hexnumber[9]; /* includes '\0' space */ |
c906108c SS |
3288 | |
3289 | if (tftp_in_use) | |
3290 | { | |
3291 | static char *load_cmd_prefix = "load -b -s "; | |
3292 | char *cmd; | |
3293 | struct stat stbuf; | |
3294 | ||
3295 | /* Close off the temporary file containing the load data. */ | |
3296 | fclose (tftp_file); | |
3297 | tftp_file = NULL; | |
3298 | ||
3299 | /* Make the temporary file readable by the world. */ | |
3300 | if (stat (tftp_localname, &stbuf) == 0) | |
3301 | chmod (tftp_localname, stbuf.st_mode | S_IROTH); | |
3302 | ||
3303 | /* Must reinitialize the board to prevent PMON from crashing. */ | |
3304 | mips_send_command ("initEther\r", -1); | |
3305 | ||
3306 | /* Send the load command. */ | |
3307 | cmd = xmalloc (strlen (load_cmd_prefix) + strlen (tftp_name) + 2); | |
3308 | strcpy (cmd, load_cmd_prefix); | |
3309 | strcat (cmd, tftp_name); | |
3310 | strcat (cmd, "\r"); | |
3311 | mips_send_command (cmd, 0); | |
3312 | free (cmd); | |
3313 | if (!mips_expect_download ("Downloading from ")) | |
3314 | return; | |
3315 | if (!mips_expect_download (tftp_name)) | |
3316 | return; | |
3317 | if (!mips_expect_download (", ^C to abort\r\n")) | |
3318 | return; | |
3319 | } | |
3320 | ||
3321 | /* Wait for the stuff that PMON prints after the load has completed. | |
3322 | The timeout value for use in the tftp case (15 seconds) was picked | |
3323 | arbitrarily but might be too small for really large downloads. FIXME. */ | |
3324 | if (mips_monitor == MON_LSI) | |
3325 | { | |
3326 | pmon_check_ack ("termination"); | |
3327 | mips_expect_timeout ("Entry address is ", tftp_in_use ? 15 : 2); | |
3328 | } | |
3329 | else | |
3330 | mips_expect_timeout ("Entry Address = ", tftp_in_use ? 15 : 2); | |
3331 | ||
c5aa993b | 3332 | sprintf (hexnumber, "%x", final); |
c906108c SS |
3333 | mips_expect (hexnumber); |
3334 | mips_expect ("\r\n"); | |
3335 | if (mips_monitor != MON_LSI) | |
3336 | pmon_check_ack ("termination"); | |
3337 | mips_expect ("\r\ntotal = 0x"); | |
c5aa993b | 3338 | sprintf (hexnumber, "%x", bintotal); |
c906108c SS |
3339 | mips_expect (hexnumber); |
3340 | if (!mips_expect_download (" bytes\r\n")) | |
3341 | return; | |
3342 | ||
3343 | if (tftp_in_use) | |
3344 | remove (tftp_localname); /* Remove temporary file */ | |
3345 | } | |
3346 | ||
3347 | static void | |
3348 | pmon_download (buffer, length) | |
3349 | char *buffer; | |
3350 | int length; | |
3351 | { | |
3352 | if (tftp_in_use) | |
3353 | fwrite (buffer, 1, length, tftp_file); | |
3354 | else | |
3355 | SERIAL_WRITE (udp_in_use ? udp_desc : mips_desc, buffer, length); | |
3356 | } | |
3357 | ||
3358 | static void | |
3359 | pmon_load_fast (file) | |
3360 | char *file; | |
3361 | { | |
3362 | bfd *abfd; | |
3363 | asection *s; | |
3364 | unsigned char *binbuf; | |
3365 | char *buffer; | |
3366 | int reclen; | |
3367 | unsigned int csum = 0; | |
3368 | int hashmark = !tftp_in_use; | |
3369 | int bintotal = 0; | |
3370 | int final = 0; | |
3371 | int finished = 0; | |
3372 | ||
c5aa993b JM |
3373 | buffer = (char *) xmalloc (MAXRECSIZE + 1); |
3374 | binbuf = (unsigned char *) xmalloc (BINCHUNK); | |
c906108c | 3375 | |
c5aa993b | 3376 | abfd = bfd_openr (file, 0); |
c906108c | 3377 | if (!abfd) |
c5aa993b JM |
3378 | { |
3379 | printf_filtered ("Unable to open file %s\n", file); | |
3380 | return; | |
3381 | } | |
c906108c | 3382 | |
c5aa993b JM |
3383 | if (bfd_check_format (abfd, bfd_object) == 0) |
3384 | { | |
3385 | printf_filtered ("File is not an object file\n"); | |
3386 | return; | |
3387 | } | |
c906108c SS |
3388 | |
3389 | /* Setup the required download state: */ | |
3390 | mips_send_command ("set dlproto etxack\r", -1); | |
3391 | mips_send_command ("set dlecho off\r", -1); | |
3392 | /* NOTE: We get a "cannot set variable" message if the variable is | |
3393 | already defined to have the argument we give. The code doesn't | |
3394 | care, since it just scans to the next prompt anyway. */ | |
3395 | /* Start the download: */ | |
c5aa993b JM |
3396 | pmon_start_download (); |
3397 | ||
c906108c | 3398 | /* Zero the checksum */ |
c5aa993b JM |
3399 | sprintf (buffer, "/Kxx\n"); |
3400 | reclen = strlen (buffer); | |
c906108c | 3401 | pmon_download (buffer, reclen); |
c5aa993b | 3402 | finished = pmon_check_ack ("/Kxx"); |
c906108c SS |
3403 | |
3404 | for (s = abfd->sections; s && !finished; s = s->next) | |
c5aa993b JM |
3405 | if (s->flags & SEC_LOAD) /* only deal with loadable sections */ |
3406 | { | |
3407 | bintotal += s->_raw_size; | |
3408 | final = (s->vma + s->_raw_size); | |
3409 | ||
3410 | printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, (unsigned int) s->vma, | |
3411 | (unsigned int) (s->vma + s->_raw_size)); | |
3412 | gdb_flush (gdb_stdout); | |
3413 | ||
3414 | /* Output the starting address */ | |
3415 | sprintf (buffer, "/A"); | |
3416 | reclen = pmon_makeb64 (s->vma, &buffer[2], 36, &csum); | |
3417 | buffer[2 + reclen] = '\n'; | |
3418 | buffer[3 + reclen] = '\0'; | |
3419 | reclen += 3; /* for the initial escape code and carriage return */ | |
3420 | pmon_download (buffer, reclen); | |
3421 | finished = pmon_check_ack ("/A"); | |
3422 | ||
3423 | if (!finished) | |
3424 | { | |
3425 | unsigned int binamount; | |
3426 | unsigned int zerofill = 0; | |
3427 | char *bp = buffer; | |
3428 | unsigned int i; | |
3429 | ||
3430 | reclen = 0; | |
3431 | ||
3432 | for (i = 0; ((i < s->_raw_size) && !finished); i += binamount) | |
3433 | { | |
3434 | int binptr = 0; | |
3435 | ||
3436 | binamount = min (BINCHUNK, s->_raw_size - i); | |
3437 | ||
3438 | bfd_get_section_contents (abfd, s, binbuf, i, binamount); | |
3439 | ||
3440 | /* This keeps a rolling checksum, until we decide to output | |
3441 | the line: */ | |
3442 | for (; ((binamount - binptr) > 0);) | |
3443 | { | |
3444 | pmon_make_fastrec (&bp, binbuf, &binptr, binamount, &reclen, &csum, &zerofill); | |
3445 | if (reclen >= (MAXRECSIZE - CHECKSIZE)) | |
3446 | { | |
3447 | reclen = pmon_checkset (reclen, &bp, &csum); | |
3448 | pmon_download (buffer, reclen); | |
3449 | finished = pmon_check_ack ("data record"); | |
3450 | if (finished) | |
3451 | { | |
3452 | zerofill = 0; /* do not transmit pending zerofills */ | |
3453 | break; | |
3454 | } | |
3455 | ||
3456 | if (hashmark) | |
3457 | { | |
3458 | putchar_unfiltered ('#'); | |
3459 | gdb_flush (gdb_stdout); | |
3460 | } | |
3461 | ||
3462 | bp = buffer; | |
3463 | reclen = 0; /* buffer processed */ | |
3464 | } | |
3465 | } | |
3466 | } | |
3467 | ||
3468 | /* Ensure no out-standing zerofill requests: */ | |
3469 | if (zerofill != 0) | |
3470 | reclen = pmon_zeroset (reclen, &bp, &zerofill, &csum); | |
3471 | ||
3472 | /* and then flush the line: */ | |
3473 | if (reclen > 0) | |
3474 | { | |
3475 | reclen = pmon_checkset (reclen, &bp, &csum); | |
3476 | /* Currently pmon_checkset outputs the line terminator by | |
3477 | default, so we write out the buffer so far: */ | |
3478 | pmon_download (buffer, reclen); | |
3479 | finished = pmon_check_ack ("record remnant"); | |
3480 | } | |
3481 | } | |
3482 | ||
3483 | putchar_unfiltered ('\n'); | |
3484 | } | |
c906108c SS |
3485 | |
3486 | /* Terminate the transfer. We know that we have an empty output | |
3487 | buffer at this point. */ | |
c5aa993b | 3488 | sprintf (buffer, "/E/E\n"); /* include dummy padding characters */ |
c906108c SS |
3489 | reclen = strlen (buffer); |
3490 | pmon_download (buffer, reclen); | |
3491 | ||
c5aa993b JM |
3492 | if (finished) |
3493 | { /* Ignore the termination message: */ | |
3494 | SERIAL_FLUSH_INPUT (udp_in_use ? udp_desc : mips_desc); | |
3495 | } | |
3496 | else | |
3497 | { /* Deal with termination message: */ | |
3498 | pmon_end_download (final, bintotal); | |
3499 | } | |
c906108c SS |
3500 | |
3501 | return; | |
3502 | } | |
3503 | ||
3504 | /* mips_load -- download a file. */ | |
3505 | ||
3506 | static void | |
3507 | mips_load (file, from_tty) | |
c5aa993b JM |
3508 | char *file; |
3509 | int from_tty; | |
c906108c SS |
3510 | { |
3511 | /* Get the board out of remote debugging mode. */ | |
3512 | if (mips_exit_debug ()) | |
3513 | error ("mips_load: Couldn't get into monitor mode."); | |
3514 | ||
3515 | if (mips_monitor != MON_IDT) | |
c5aa993b | 3516 | pmon_load_fast (file); |
c906108c | 3517 | else |
c5aa993b | 3518 | mips_load_srec (file); |
c906108c SS |
3519 | |
3520 | mips_initialize (); | |
3521 | ||
3522 | /* Finally, make the PC point at the start address */ | |
3523 | if (mips_monitor != MON_IDT) | |
3524 | { | |
3525 | /* Work around problem where PMON monitor updates the PC after a load | |
c5aa993b JM |
3526 | to a different value than GDB thinks it has. The following ensures |
3527 | that the write_pc() WILL update the PC value: */ | |
c906108c SS |
3528 | register_valid[PC_REGNUM] = 0; |
3529 | } | |
3530 | if (exec_bfd) | |
3531 | write_pc (bfd_get_start_address (exec_bfd)); | |
3532 | ||
3533 | inferior_pid = 0; /* No process now */ | |
3534 | ||
3535 | /* This is necessary because many things were based on the PC at the time that | |
3536 | we attached to the monitor, which is no longer valid now that we have loaded | |
3537 | new code (and just changed the PC). Another way to do this might be to call | |
3538 | normal_stop, except that the stack may not be valid, and things would get | |
3539 | horribly confused... */ | |
3540 | ||
3541 | clear_symtab_users (); | |
3542 | } | |
3543 | ||
3544 | ||
3545 | /* Pass the command argument as a packet to PMON verbatim. */ | |
3546 | ||
3547 | static void | |
3548 | pmon_command (args, from_tty) | |
3549 | char *args; | |
3550 | int from_tty; | |
3551 | { | |
3552 | char buf[DATA_MAXLEN + 1]; | |
3553 | int rlen; | |
3554 | ||
3555 | sprintf (buf, "0x0 %s", args); | |
3556 | mips_send_packet (buf, 1); | |
3557 | printf_filtered ("Send packet: %s\n", buf); | |
3558 | ||
3559 | rlen = mips_receive_packet (buf, 1, mips_receive_wait); | |
3560 | buf[rlen] = '\0'; | |
3561 | printf_filtered ("Received packet: %s\n", buf); | |
3562 | } | |
3563 | \f | |
3564 | void | |
3565 | _initialize_remote_mips () | |
3566 | { | |
3567 | /* Initialize the fields in mips_ops that are common to all four targets. */ | |
3568 | mips_ops.to_longname = "Remote MIPS debugging over serial line"; | |
3569 | mips_ops.to_close = mips_close; | |
3570 | mips_ops.to_detach = mips_detach; | |
3571 | mips_ops.to_resume = mips_resume; | |
3572 | mips_ops.to_fetch_registers = mips_fetch_registers; | |
3573 | mips_ops.to_store_registers = mips_store_registers; | |
3574 | mips_ops.to_prepare_to_store = mips_prepare_to_store; | |
3575 | mips_ops.to_xfer_memory = mips_xfer_memory; | |
3576 | mips_ops.to_files_info = mips_files_info; | |
3577 | mips_ops.to_insert_breakpoint = mips_insert_breakpoint; | |
3578 | mips_ops.to_remove_breakpoint = mips_remove_breakpoint; | |
3579 | mips_ops.to_kill = mips_kill; | |
3580 | mips_ops.to_load = mips_load; | |
3581 | mips_ops.to_create_inferior = mips_create_inferior; | |
3582 | mips_ops.to_mourn_inferior = mips_mourn_inferior; | |
3583 | mips_ops.to_stratum = process_stratum; | |
3584 | mips_ops.to_has_all_memory = 1; | |
3585 | mips_ops.to_has_memory = 1; | |
3586 | mips_ops.to_has_stack = 1; | |
3587 | mips_ops.to_has_registers = 1; | |
3588 | mips_ops.to_has_execution = 1; | |
3589 | mips_ops.to_magic = OPS_MAGIC; | |
3590 | ||
3591 | /* Copy the common fields to all four target vectors. */ | |
3592 | pmon_ops = ddb_ops = lsi_ops = mips_ops; | |
3593 | ||
3594 | /* Initialize target-specific fields in the target vectors. */ | |
3595 | mips_ops.to_shortname = "mips"; | |
3596 | mips_ops.to_doc = "\ | |
3597 | Debug a board using the MIPS remote debugging protocol over a serial line.\n\ | |
3598 | The argument is the device it is connected to or, if it contains a colon,\n\ | |
3599 | HOST:PORT to access a board over a network"; | |
3600 | mips_ops.to_open = mips_open; | |
3601 | mips_ops.to_wait = mips_wait; | |
3602 | ||
3603 | pmon_ops.to_shortname = "pmon"; | |
c5aa993b | 3604 | pmon_ops.to_doc = "\ |
c906108c SS |
3605 | Debug a board using the PMON MIPS remote debugging protocol over a serial\n\ |
3606 | line. The argument is the device it is connected to or, if it contains a\n\ | |
3607 | colon, HOST:PORT to access a board over a network"; | |
3608 | pmon_ops.to_open = pmon_open; | |
3609 | pmon_ops.to_wait = mips_wait; | |
3610 | ||
3611 | ddb_ops.to_shortname = "ddb"; | |
3612 | ddb_ops.to_doc = "\ | |
3613 | Debug a board using the PMON MIPS remote debugging protocol over a serial\n\ | |
3614 | line. The first argument is the device it is connected to or, if it contains\n\ | |
3615 | a colon, HOST:PORT to access a board over a network. The optional second\n\ | |
3616 | parameter is the temporary file in the form HOST:FILENAME to be used for\n\ | |
3617 | TFTP downloads to the board. The optional third parameter is the local name\n\ | |
3618 | of the TFTP temporary file, if it differs from the filename seen by the board."; | |
3619 | ddb_ops.to_open = ddb_open; | |
3620 | ddb_ops.to_wait = mips_wait; | |
3621 | ||
3622 | lsi_ops.to_shortname = "lsi"; | |
3623 | lsi_ops.to_doc = pmon_ops.to_doc; | |
3624 | lsi_ops.to_open = lsi_open; | |
3625 | lsi_ops.to_wait = mips_wait; | |
3626 | ||
3627 | /* Add the targets. */ | |
3628 | add_target (&mips_ops); | |
3629 | add_target (&pmon_ops); | |
3630 | add_target (&ddb_ops); | |
3631 | add_target (&lsi_ops); | |
3632 | ||
3633 | add_show_from_set ( | |
c5aa993b JM |
3634 | add_set_cmd ("timeout", no_class, var_zinteger, |
3635 | (char *) &mips_receive_wait, | |
3636 | "Set timeout in seconds for remote MIPS serial I/O.", | |
3637 | &setlist), | |
3638 | &showlist); | |
c906108c SS |
3639 | |
3640 | add_show_from_set ( | |
c5aa993b JM |
3641 | add_set_cmd ("retransmit-timeout", no_class, var_zinteger, |
3642 | (char *) &mips_retransmit_wait, | |
3643 | "Set retransmit timeout in seconds for remote MIPS serial I/O.\n\ | |
c906108c SS |
3644 | This is the number of seconds to wait for an acknowledgement to a packet\n\ |
3645 | before resending the packet.", &setlist), | |
c5aa993b | 3646 | &showlist); |
c906108c SS |
3647 | |
3648 | add_show_from_set ( | |
c5aa993b JM |
3649 | add_set_cmd ("syn-garbage-limit", no_class, var_zinteger, |
3650 | (char *) &mips_syn_garbage, | |
3651 | "Set the maximum number of characters to ignore when scanning for a SYN.\n\ | |
c906108c SS |
3652 | This is the maximum number of characters GDB will ignore when trying to\n\ |
3653 | synchronize with the remote system. A value of -1 means that there is no limit\n\ | |
3654 | (Note that these characters are printed out even though they are ignored.)", | |
c5aa993b JM |
3655 | &setlist), |
3656 | &showlist); | |
c906108c SS |
3657 | |
3658 | add_show_from_set | |
3659 | (add_set_cmd ("monitor-prompt", class_obscure, var_string, | |
3660 | (char *) &mips_monitor_prompt, | |
3661 | "Set the prompt that GDB expects from the monitor.", | |
3662 | &setlist), | |
3663 | &showlist); | |
3664 | ||
3665 | add_show_from_set ( | |
c5aa993b JM |
3666 | add_set_cmd ("monitor-warnings", class_obscure, var_zinteger, |
3667 | (char *) &monitor_warnings, | |
3668 | "Set printing of monitor warnings.\n" | |
3669 | "When enabled, monitor warnings about hardware breakpoints " | |
3670 | "will be displayed.", | |
3671 | &setlist), | |
3672 | &showlist); | |
c906108c SS |
3673 | |
3674 | add_com ("pmon <command>", class_obscure, pmon_command, | |
c5aa993b | 3675 | "Send a packet to PMON (must be in debug mode)."); |
c906108c | 3676 | } |