[deliverable/binutils-gdb.git] / gdb / testsuite / ChangeLog

Tue Jul  4 03:43:49 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.asm/asm-source.exp: Use raw AS/LD instead of CC to
 	compile/link program.  Update line numbers.
	* gdb.asm/d10v.inc: Define ``startup''.
	* gdb.asm/asmsrc1.s: Add definition of _start.
	
Fri Jun 23 17:45:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/call-ar-st.exp: More rewrites of multi-line patterns.

2000-06-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/maint.exp: Add 'maint print architecture' item to output
 	of 'help maint print' command.

Fri Jun 16 18:22:05 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/call-ar-st.exp: Rewrite all multi-line patterns so that
 	they use gdb_expect_list.

Wed Jun  7 13:02:40 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/commands.exp: Use ``set remote
 	memory-read-packet-size'' instead of ``set endian big'' to test
 	long commands.

2000-06-03  Daniel Berlin  <dan@cgsoftware.com>

	* gdb.c++/templates.exp (do_tests): Make all of these work under
	g++, and stop skipping them. 

	* gdb.c++/namespace.exp: Move from gdb.hp/gdb.aCC to here, make it
	work under g++.

	* gdb.c++/misc.cc: Fix ambiguous initialization with correct 
	initialization.

2000-06-02  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/annota1.exp (run until main breakpoint): Loosen up
	the regular expression: accept an (almost) arbitrary sequence of
	"frames-invalid" and "breakpoints-invalid" messages both before
	and after the "starting" message.

2000-06-02  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.c++/local.exp: This test has never been known to work with g++.

2000-05-18  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/annota1.exp (annotate-signal-handler-caller):
	Relax the regular expression a little, make it pass on Solaris 8.

2000-05-12  Kevin Buettner  <kevinb@redhat.com>

	* gdb.base/step-test.exp: On IA-64 targets, when stepping out of
	a call, do not require that gdb stop on the line after the call. 
	Instead, it is permissible for gdb to stop on the line of the
	call itself.

2000-05-12  Michael Snyder  <msnyder@.cygnus.com>

	* gdb.base/break.exp (bp on small function, optimized file):
	Add a second pass pattern.  The behavior differs here between stabs
	and dwarf for one-line functions.  Stabs preserves two line symbols
	(one before the prologue and one after) with the same line number,
	but dwarf regards these as duplicates and discards one of them.
	Therefore the address after the prologue (where the breakpoint is)
	has no exactly matching line symbol, and GDB reports the breakpoint
	as if it were in the middle of a line rather than at the beginning.

2000-05-08  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/interrupt.exp: Make "pass" message say "send" 
	rather than "send_gdb" (for consistancy).

Mon May  1 15:37:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	From 2000-04-28 Andreas Jaeger  <aj@suse.de>:
	* gdb.c++/templates.cc: Properly check for GCC version number.
	* lib/compiler.cc: Likewise

2000-04-28  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/break.exp: When compiled with -O2 optimization, 
	gdb may not stop at the first line of main, due to code motion.

2000-04-26  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/call-ar-st.exp: Bail out if target is sparclet.
	This test depends on parsing the printf output from the target.
	Since the sparclet stub doesn't do stdio, this will never work.
	* gdb.base/call-rt-st.exp: ditto.
	* gdb.base/call-strs: ditto.

2000-04-24  Michael Snyder  <msnyder@seadog.cygnus.com>

	* gdb.base/miscexprs.exp: make sizeof long array test portable.

	* gdb.base/ending-run.exp: After connecting to a remote target,
	but before running, the target will appear to be in a random
	location.  Specify both a file and a line for breakpoints.
	Also, the function that calls main may be called 'init'
	rather than 'start'.

2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/help.exp: Update output for add-symbol-file command.

2000-04-10  Fernando Nasser  <fnasser@cygnus.com>

	From Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
	* gdb.base/structs2.c: Support platforms defaulting to a unsigned char.

2000-04-07  J.T. Conklin  <jtc@redback.com>

	* gdb.base/call-ar-st.exp: Relax patterns matching tab characters.

	* gdb.base/funcargs.exp: Relax patterns matching pointers to char.

Thu Mar 30 13:26:19 2000  Philippe De Muyter  <phdm@macqel.be>

	* gdb.base/call-ar-st.c (init_small_structs, main): Use floating-point
 	values that can be represented exactly.
	* gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match
	above change, and to not check against the directory part of the source
	file name.
	(step into print_long_arg_list): Likewise.
	(print print_small_structs from print_long_arg_list): Likewise.
	(print print_long_arg_list): Likewise.

2000-03-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/printcmds.c: Terminate char array ctable2 with 0.

Mon Mar 27 14:46:37 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* ChangeLog, gdb.base/commands.exp: Revert whitespace changes.

2000-03-25  Daniel Berlin  <dan@cgsoftware.com>

	* gdb.base/commands.exp (deprecated_command_test): Add test for
	deprecate with no arguments.

2000-03-24  Jonathan Larmour  <jlarmour@redhat.co.uk>

	* gdb.base/break.exp: Add new test for setting breakpoints on
	optimized code so we can test breakpoints work even when function
	prologues may be optimized away

2000-03-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	From David Whedon <dwhedon@gordian.com>
        * gdb.base/commands.exp : Added command deprecator tests.

2000-03-22  Daniel Berlin   <dan@cgsoftware.com>

       * gdb.base/help.exp: Added test for new apropos command.

2000-03-21  Kevin Buettner <kevinb@redhat.com>

	* gdb.base/pointers.c (usevar): New function.
	(main): Make sure that global variables v_int_pointer2, rptr,
	and y are all referenced someplace in the program by calling
	usevar() on them.  [Some linkers delete symbols which are
	never referenced.  The space remains, but there's no way to
	get a (symbolic) handle on the variable from the debugger.]

2000-03-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/printcmds.c: Add typedeffed arrays.

	* gdb.base/printcmds.exp (test_print_typedef_arrays): New
 	procedure to test arrays that are typedef'd.

2000-03-13  James Ingham  <jingham@leda.cygnus.com>

	* lib/gdb.exp: Fix the gdbtk_start routine to correctly find all
	the library directories. 

Mon Feb 21 13:05:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* configure.in (configdirs): Add sub directory gdb.mi.
	* configure: Re-generate.

	* gdb.mi: New directory.
	
2000-02-25  Scott Bambrough <scottb@netwinder.org>

	* gdb.base/long_long.exp: Correct test suite failure when printing
 	a long long value as a double on ARM platforms.

2000-02-16  Jim Blandy  <jimb@redhat.com>

	* gdb.base/break.exp ("breakpoint line number"): Make sure the
	default source file is set properly before running this test.

2000-02-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* lib/gdb.exp: Tell the testsuite that now gdbtk is in the
 	gdbtk/library directory, not in gdbtcl2.

2000-02-04  Jim Blandy  <jimb@redhat.com>

	* gdb.c++/templates.exp: ("ptype T5<int>"): Remove extraneous
	backslash from regexp pattern.

	* gdb.c++/ovldbreak.exp (continue_to_bp_overloaded): New
	procedure.  Use it to run all the "continue to bp overloaded"
	tests.  Note that this changes the names of the tests slightly.
	If the breakpoint hit message includes a hex PC value, because
	GCC's Dwarf 2 line info doesn't help us distinguish the prologue
	from the real source code, still consider that a pass.

	* gdb.base/condbreak.exp ("run until breakpoint at marker2"):
	XFAIL here if the breakpoint message contains a hex address.  Note
	similar change on 1999-11-02.

	* gdb.base/step-test.exp: Comment Fernando's change of 2000-02-02.

	* gdb.base/ptype.exp: Establish a default source file before
	calling get_debug_format.

2000-02-03  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/watchpoint.exp: Remove duplication of test messages.

2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/step-test.exp: Fix the steps to enter a callee by means
	of successive stepi commands -- while in the prologue we should see
	the function entry bracket.

2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/ending-run.exp: Add ARM in thumb mode case, where we
	reach __change_mode() when stepping through the end of main().

2000-01-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/default.exp: Fix expected pattern.
	* gdb.base/help.exp: Same.

2000-01-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/so-indr-cl.exp: Don't execute the test if not on HPUX.
  	Don't use xfail's because that affects only the following test.
	
	* gdb.base/so-impl-ld.exp: Don't execute the tests if not on hpux,
 	solaris or linux.

	* gdb.base/selftest.exp: Update to reflect changes to main.c.

2000-01-07  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/display.exp: Some yacc parsers like to say 
	"A syntax error" rather than "A parse error".  Accept both.

2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/default.exp: Remove OS dependent string from "target
	remote" test.
	* gdb.base/help.exp: Same for "help target remote" test.

2000-01-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	From Jim Kingdon <kingdon@redhat.com>:

	* gdb.c++/annota2.exp: Fix "delete bps" test to wait for the
 	prompt (cleanup rather than necessity, but still might keep output
 	from spilling to next test).

2000-01-02  Fred Fish  <fnf@cygnus.com>

	* gdb.base/ptype.c (FALSE, TRUE): #undef these to avoid clash on
	AIX, which defines them in <sys/types.h>.

1999-12-16  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/default.exp: Match arm* etc instead of arm in "info
 	float" test.

1999-12-13 Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/watchpoint.exp: Add missing "(timeout)" to test message.

	* gdb.base/break.exp: Add missing anchor to reg exp on "finish from
	outermost frame disallowed".

1999-12-09  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/setvar.exp: New tests for setting the value of a struct
	with a constant list.

1999-12-08  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/setvar.exp: Remove pair os tests that expected gdb to
	require the user to type a cast before setting the value of a struct.

1999-12-06  Jim Blandy  <jimb@cygnus.com>

	* gdb.base/default.exp: Expect the new 'info float' command on
	all i386 platforms.

	* gdb.threads/linux-dp.exp: Expand our ability to recognize
	LinuxThreads libraries that don't support debugging.

Sat Dec  4 15:21:18 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/remote.c: Fill the buffer with truely random data.
  	Change the buffer type to ``unsigned char'' to simplify size
 	arithmetic.

	* gdb.base/remote.exp: Reduce download numbers by one.  Typical
 	stub only handles 400-1 byte packets.  Verify that the download
 	worked.

1999-11-30  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* lib/gdb.exp (gdb_expect_list): FAIL only once on multiple pattern
	tests, using UNRESOLVED for the untested cases.  Also, does not wait
	for a timeout if the prompt was received before a recognizable pattern.

1999-11-29  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* lib/gdb.exp (gdb_expect_list): Fix spelling.

1999-11-29  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/watchpoint.exp: Add tests cases for the hit count of
 	watchpoints.

1999-11-24  Jason Merrill  <jason@casey.cygnus.com>

	* gdb.base/condbreak.exp: Add missing '$gdb_prompt $'.

	* gdb.c++/local.exp: Be more flexible in recognizing local class
	name mangling.  Don't allow horribly truncated method names.
	* gdb.c++/derivation.exp: Expect protected inheritance.
	* gdb.c++/inherit.exp: Be more flexible in recognizing vbase pointers.
	* gdb.c++/virtfunc.exp: Likewise.
	* gdb.c++/classes.exp: Likewise.  Don't require the enclosing scope
	when printing a nested enum.

1999-11-22  Jim Blandy  <jimb@cygnus.com>

	* gdb.base/step-test.exp: Properly await GDB's response to setting
	a breakpoint on the call to large_struct_by_value.

	* gdb.base/ending-run.exp ("step to end of run 1"): Don't fail
	just because we have debug info for the `start' function.

1999-11-19  Jim Blandy  <jimb@zenia.red-bean.com>

	* gdb.threads/linux-dp.exp ("create philosopher"): Recognize the
	"Unknown signal" messages, which indicate (on LinuxThreads) that
	GDB doesn't know how to debug threads on this system.  This is
	better than hanging while philosopher 0 dumps chatter into gdb.log.

1999-11-18  Tom Tromey  <tromey@cygnus.com>

	* gdb.trace/deltrace.exp: Updated test to reflect new error text.

1999-11-18  Fred Fish  <fnf@cygnus.com>

	* gdb.base/coremaker2.c: Add sample program for generating
	cores that is more self contained than coremaker.c.  Eventually
	I'll add more code to this and tie it into the testsuite.

1999-11-12  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/dollar.exp: Remove, now in gdb.hp.

1999-11-10  Jimmy Guo  <guo@cup.hp.com>

	* gdb.exp (get_compiler_info): pick up compiler.c and compiler.cc
 	from $srcdir/lib/.
	* lib/compiler.c, lib/compiler.cc: New files, moved from gdb.base/
 	and gdb.c++/.

	* gdb.c++/derivation.exp: remove redundant get compiler info code.

	* gdb.base/commands.exp: add '$gdb_prompt $' anchor to 
	'continue with watch' test point.

1999-11-08  Jim Blandy  <jimb@zenia.red-bean.com>

	Merged from p2linux-990323-branch:
	
	* lib/gdb.exp (gdb_continue_to_breakpoint): New function.

Mon Nov  8 23:07:09 1999  Andrew Cagney  <cagney@amy.cygnus.com>

	* gdb.base/remote.exp: Test ``set remote memory-write-packet-sized
 	{limit,fixed}''.  Test ``set download-write-size''.

Sun Nov  7 17:37:01 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/funcargs.exp: Rewrite stack traceback checks using
 	gdb_expect_list.

Fri Nov  5 18:40:52 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* lib/gdb.exp (gdb_expect_list): Return a success/fail indication.

1999-11-03  Mark Salter  <msalter@cygnus.com>

	* gdb.base/break.exp: Fix "stub continue" pattern.

1999-11-03  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/shlib-call.exp ("next to shr1"): Fix test name.

1999-11-02  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/display.exp ("finish"): Add timeout clause.

	* gdb.base/condbreak.exp ("run until breakpoint at marker1"): Add
	plain prompt clause, so this doesn't have to time out in order to
	fail.

	* gdb.base/condbreak.exp, gdb.base/ena-dis-br.exp: XFAIL if the
 	breakpoint hit messages include an address.

	* gdb.base/display.exp: Don't forget to escape parens in regular
	expressions.  Unix regexp notatation sucks.

1999-11-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/annota1.exp: Test for annotate-signalled: change output
 	order for 'signalled' message.

1999-11-01  Stan Shebs  <shebs@andros.cygnus.com>

	From Jimmy Guo  <guo@cup.hp.com>:
	* gdb.base/annota1.exp: Add tests for annotate ignore count change.
	* gdb.base/annota1.c: Add code for tests to work with.

1999-10-26  Frank Ch. Eigler  <fche@cygnus.com>

	* gdb.base/remote.exp: New test for remote downloading settings.
	* gdb.base/remote.c: New file with large .data.

1999-10-18  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.threads/linux-dp.c, gdb.threads/linux-dp.exp: New test suite
	for LinuxThreads support, merged from the Code Fusion branch.

Mon Oct 11 13:57:21 1999  Andrew Cagney  <cagney@amy.cygnus.com>

	* lib/gdb.exp (gdb_run_cmd): Break complicated gdb_expect
 	containing exp_continue into a while within an expect.  Don't
 	attempt a start more than three times.  Check return value from
 	gdb_load.
	
Wed Oct  6 12:05:58 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/watchpoint.exp: Match fail ``finish from marker1'' with
 	a pass case.

1999-10-01  Kevin Buettner <kevinb@cygnus.com>

	* gdb.base/break.c (main): Added a statement that we can step
	off of.
	* gdb.base/break.exp: Added tests for setting a breakpoint
	at an offset and stepping onto a breakpoint.

1999-10-01  Fred Fish  <fnf@cygnus.com>

	* gdb.base/help.exp (help add-symbol-file): Update to match current 
	gdb output.

1999-09-18  Jim Blandy  <jimb@cris.red-bean.com>

	* gdb.base/break.exp: Code locations are in hex, don't forget!
	(For HP-UX.)

1999-09-17  Stan Shebs  <shebs@andros.cygnus.com>

	* condbreak.exp: Use break.c as test program.
	* condbreak.c: Remove, redundant with break.c.

1999-09-15  Stan Shebs  <shebs@andros.cygnus.com>

	* config/monitor.exp (gdb_target_monitor): Disable X- and
 	Z-packets if the target needs it.

1999-09-13  James Ingham  <jingham@leda.cygnus.com>

	* gdb.c++/overload.exp: Added tests for listing overloaded
	functions with function pointers in the arg, explicitly calling
	out the version you want.

1999-09-09  Stan Shebs  <shebs@andros.cygnus.com>

	* long_long.exp: Add variations of test cases that work for
	targets with 16-bit ints and 32-bit doubles.

1999-09-08  Stan Shebs  <shebs@andros.cygnus.com>

	* break.c (main): Compare a possibly-uninitialized argc with an
	unlikely value that fits in 16 bits.

1999-09-07  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/restore.c, gdb.base/restore.exp: Use 0x7eeb instead of
	0xfeeb, don't want negative numbers if ints are 16 bits.

	* lib/gdb.exp (skip_cplus_tests): New proc.
	* gdb.c++/ambiguous.exp, gdb.c++/annota2.exp,
 	gdb.c++/anon-union.exp, gdb.c++/classes.exp,
 	gdb.c++/cplusfuncs.exp, gdb.c++/ctti.exp, gdb.c++/demangle.exp,
 	gdb.c++/derivation.exp, gdb.c++/inherit.exp, gdb.c++/local.exp,
 	gdb.c++/member-ptr.exp, gdb.c++/method.exp, gdb.c++/misc.exp,
 	gdb.c++/overload.exp, gdb.c++/ovldbreak.exp,
 	gdb.c++/ref-types.exp, gdb.c++/templates.exp, gdb.c++/userdef.exp,
 	gdb.c++/virtfunc.exp: Use it to skip over C++ tests.

	* gdb.c++/cplusfuncs.exp: Use get_compiler_info consistently.

Fri Sep  3 15:37:12 1999  Kevin Buettner  <kevinb@cygnus.com>

	* gdb.base/corefile.exp (up): Allow a parameter to appear
	in the frame that we're going up to.

	From Jim Blandy <jimb@cygnus.com>:

	* gdb.base/default.exp (info float): Expect some output now.

	* gdb.base/callfuncs.exp (do_function_calls): We no longer expect
	returning floating-point values to fail on the x86.
	* gdb.base/callfwmall.exp (do_function_calls): Same.

	* gdb.base/list.exp (test_listsize): Correct expectations for
	listing line 1 with listsize 2.  Also, listing a single line
	works now, as does listing three lines.  [Kevin's note: There
	were a number of other cases fixed too where the expectations
	differed...]

1999-09-02  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/selftest.exp: Add case for when version prints as
	constant string instead of char pointer.

1999-08-25  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/ending-run.exp: Add Solaris case for what happens when
 	stepping out of main.

	* gdb.c++/derivation.exp: XFAIL inf fn calls for all configs, if
	G++ used.

	* gdb.c++/local.exp: Expect ptype NestedInnerLocal to succeed
 	always, expect ptype InnerLocal::NestedInnerLocal to fail always.

	* gdb.c++/ovldbreak.exp: Update match string in test that
	includes a warning of multiple breakpoints.

1999-08-24  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/display.exp: Improve precision of step-after-finish
	added yesterday.

	* gdb.base/signals.exp: Add extra wildcard to "handle all print"
 	test.

	* gdb.c++/classes.exp: XFAIL HP-compiler-only tests for all
	configs when using G++, not just hppa*.

1999-08-24  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/async.c: New file.
	* gdb.base/async.exp: New file.

Tue Aug 24 03:24:53 1999  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/break.exp: Tweak PA specific tests to properly handle
	PA64.

Mon Aug 23 10:25:20 1999  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/display.exp: "finish" can leave us mid-line on many
	targets, deal with it.  Add a small constant to main, instead of
	1000 since main+1000 may not be a valid address in the target.

	* gdb.base/dollar.exp: Do not run for PA processors in wide mode
	on hpux11.

	* gdb.base/attach.exp: Handle another hpux11 error message variant
	when attaching to a process that does not exist.

1999-08-19  J.T. Conklin  <jtc@redback.com>

	* gdb.base/call-ar-exp.exp: Fix pattern matching whitespace
 	characters in 'continue to 1241' test.

1999-08-17  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/call-ar-st.exp: Add a shorter match case for the
	stop in print_long_arg_list, define and use a whitespace
	variable in print_small_structs test, add an XFAIL for Solaris.
	* gdb.base/dbx.exp: XFAIL func commands until somebody is
	interested enough to fix.

1999-08-13  Keith Seitz  <keiths@cygnus.com>

	* gdb.base/dbx.exp (dbx_gdb_file_cmd): Rename to gdb_file_cmd.
	(dbx_gdb_load): Remove. Use gdb_load instead, since that
	proc knows about targets other than the natives.
	(test_assign): Use "gdb_run_cmd" to "run" the target.
	Check that we've actually hit the breakpoint at main.
	When we attempt to assign a value to a local variable, check
	that the variable is in the current scope, i.e., don't use
	a test with an empty result.

Tue Aug 10 15:25:16 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/maint.exp: Add test of ``maintenance internal-error''
 	command.

1999-08-09  Stan Shebs  <shebs@andros.cygnus.com>

	From Jimmy Guo <guo@cup.hp.com> and others at HP:
	gdb.hp: Move tests into subdirectories gdb.aCC, gdb.base-hp,
	gdb.compat, gdb.threads-hp.
	gdb.hp/configure, gdb.hp/configure.in: New files.
	gdb.hp/Makefile.in: Recurse into new subdirs.
	gdb.hp/gdb.defects: New directory, tests for HP bug reports.
	gdb.hp/gdb.objdbg: New directory, tests for debugging info
	in object files.
	gdb.hp/tools: New directory, aux tools for HP-specific tests.

1999-08-05  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/display.exp: Help expect by putting a newline in the
 	funky printf, remove a bogus p/a test.

1999-08-05  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/display.exp: Make sure that when we say 'run', we are
 	connected to the target. This is necessary when running not
 	natively.

1999-08-03  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/step-test.exp: Removed some extraneous messages.

	* gdb.base/long_long.exp: Don't run memory examination tests
	on little-endian targets (they will need a different set of
	results to match).

1999-08-02  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.c++/virtfunc.exp: Expect to fail the virtual call tests
	until somebody decides to fix GDB.

	* gdb.base/long_long.c: Stop compiler complaint by specifying long
 	constant as "ULL".
	* gdb.base/long_long.exp: Loosen x/c test, add partial result
	matches for a couple x/2 commands.

1999-07-30  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.c++/ref-types.cc, gdb.c++/ref-types.exp: Appease doschk
	by merging in ref-types2 tests.
	* gdb.c++/ref-types2.cc, gdb.c++/ref-types2.exp: Remove.

	From Jimmy Guo <guo@cup.hp.com> and others at HP:
	* gdb.c++/Makefile.in: Add standard actions.
	(EXECUTABLES): Rename from PROGS, update list.
	* gdb.c++/ambiguous.cc, gdb.c++/ambiguous.exp: Move to here
	from gdb.hp.
	* gdb.c++/anon-union.cc: Don't use anonymous struct, make
	foo and bar locals.
	* gdb.c++/anon-union.exp: Fix tests to match.
	* gdb.c++/classes.exp: Run if HP compiler used, add extra
	expect matches to handle output variations.
	* gdb.c++/cplusfuncs.cc: Make operator -> return foo *.
	* gdb.c++/cplusfuncs.exp: Update to match, allow word "class" in
 	output, add HP alternatives for new and delete prints.
	* gdb.c++/ctti.exp, gdb.c++/cttiadd.cc, gdb.c++/cttiadd1.cc,
 	gdb.c++/cttiadd2.cc, gdb.c++/cttiadd3.cc: Move here from gdb.hp.
	* gdb.c++/demangle.exp: Use $style when reporting failure.
	* gdb.c++/derivation.exp: Add some xfails if GCC-compiled.
	* gdb.c++/inherit.exp: Run if HP compiler used, add some
	match alternatives.
	* gdb.c++/local.exp: Add match alternatives or xfails for HP
 	compilers.
	* gdb.c++/member-ptr.exp: Add xfails for hppa*-*-*.
	* gdb.c++/method.exp: Add match alternatives.
	* gdb.c++/misc.cc: Add bool types.
	* gdb.c++/misc.exp: Add tests for bool types.
	* gdb.c++/overload.exp: Add xfails.
	* gdb.c++/templates.cc: Remove bogus arglist init, init fvpchar.
	* gdb.c++/templates.exp: Run if HP compiler used, add some xfails,
	add some more template parameter tests (only for HP currently).
	* gdb.c++/userdef.exp: Add xfails for hppa*-*-*.
	* gdb.c++/virtfunc.cc: Add return type and value for main.
	* gdb.c++/virtfunc.exp: Run if HP compiler used, add some
	match alternatives.
	
1999-07-30  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/display.exp: Fix output of 'p/a &&j' test.

1999-07-29  Jim Blandy  <jimb@savonarola.red-bean.com>

	* gdb.base/signals.exp: Don't expect getting a backtrace from
	within a signal handler to fail on Linux.

1999-07-29  Stan Shebs  <shebs@andros.cygnus.com>

	From Jimmy Guo <guo@cup.hp.com> and others at HP:
	* lib/gdb.exp: Remove some gratuitious semicolons.
	(delete_breakpoints): Increase timeout.
	(gdb_expect): Add -notransfer option.
	(gdb_test): Use -notransfer option.
	(get_compiler_info): Add f77 case.
	(get_compiler): New proc, split out from gdb_preprocess, add f77
 	case.
	(gdb_preprocess): Call get_compiler.

	* gdb.base/Makefile.in (EXECUTABLES): Update the list.
	* gdb.base/attach.exp, gdb.base/display.exp,
 	gdb.base/ending-run.exp, gdb.base/gdbvars.exp,
 	gdb.base/long_long.exp, gdb.base/printcmds.exp,
 	gdb.base/structs.exp, gdb.base/structs2.exp: Remove or fill in
 	third arg to gdb_test.
	* gdb.base/call-ar-st.exp: Add HP-UX xfail for >10-arg functions.
	* gdb.base/callfuncs.exp, gdb.base/callfwmall.exp: Remove some
 	HP-UX xfails, add others.
	* gdb.base/completion.exp: Reflect name change of self-test.
	* gdb.base/condbreak.exp, gdb.base/corefile.exp,
 	gdb.base/foll-exec.exp, gdb.base/interrupt.exp,
 	gdb.base/ptype.exp, gdb.base/scope.exp, gdb.base/setvar.exp: Note
 	HP failure number.
	* gdb.base/foll-vfork.exp: Loosen matches slightly, remove
	useless HP-UX 10.30 references.
	* gdb.base/maint.exp: Loosen matches.
	* gdb.base/pointers.c (main): Declare more_code.
	* gdb.base/pointers.exp: Match on output of a `next'.
	* gdb.base/structs.c: Add prototypes.
	* gdb.base/watchpoint.exp: Remove HP-UX 10.30 reference.
	* gdb.base/whatis.exp: Fail for both HP-UX 10.20 and 11.

1999-07-29  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/list.exp: Add tests for repeating 'list <linenum>'
 	command.

1999-07-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.c++/annota2.exp: Fix delete breakpoint query testcase.
	Fix run to main failures. Watchpoint can be hardware watchpoint.
	
	* gdb.base/annota1.exp: Clean up some more, in case printf has 
	debug info.  Deal with lack of signal hanlder info in stack.

        From Jim Kingdon  <kingdon@redhat.com>:
	* gdb.base/annota1.exp: If printf has debug info, deal with it.

1999-07-19  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/foll-exec.exp, gdb.base/foll-fork.exp,
 	gdb.base/foll-vfork.exp: Don't run for crosses.

Tue Jul 13 23:37:18 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/configure.in: Check for gdbvars.exp instead of
 	a1-selftest.exp.
	* gdb.base/configure: Re-generate.

1999-07-12  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/selftest.exp: Rename from a1-selftest.exp, no point
	in trying to run first and name is too long.

	* gdb.base/pointers.c, gdb.base/pointers.exp: Add contents of
	pointers2.c and pointers2.exp, respectively.
	* gdb.base/pointers2.c, gdb.base/pointers2.exp: Remove, makes
	doschk happier.

1999-07-08  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/callfwmall.c, gdb.base/callfwmall.exp: Renamed from
	callfuncs2.c and callfuncs2.exp.

	* gdb.base/list.exp: Remove mistaken xfails.
	* gdb.base/list0.h: Add optional prototypes.

Wed Jul  7 00:27:35 1999  Andrew Cagney  <cagney@amy.cygnus.com>

        * gdb.base/setvar.exp: Increase the time-out on tests indirectly
 	calling malloc.
        * nodebug.exp, printcmds.exp, ptype.exp, setvar.exp: Ditto.
        * ptype.exp: Move test for get_debug_format to before its first
 	use.

1999-07-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/Makefile.in (EXECUTABLES): Remove annota2 executable.
	* gdb.base/annota2.cc, annota2.exp: Move from here.
	* gdb.c++/annota2.cc, annota2.exp: To here.
	* gdb.c++/Makefile.in (PROGS): Add annota2 executable.

Tue Jun 29 11:56:06 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* lib/gdb.exp (gdb_expect_list): Output one message per pattern in
 	a consistent format.

1999-06-25  Stan Shebs  <shebs@andros.cygnus.com>

	From Jimmy Guo <guo@cup.hp.com> and others at HP:
	* lib/gdb.exp (get_compiler_info): Add detection for assorted
	HP compilers, also set the globals $true and $false.

	* gdb.base/annota1.c, bitfields.c, break.c, call-ar-st.c,
 	call-rt-st.c, call-strs.c, callfuncs.c, callfuncs2.c, condbreak.c,
 	coremaker.c, ending-run.c, exprs.c, funcargs.c, interrupt.c,
 	jump.c, langs0.c, langs1.c, langs2.c, list0.c, list1.c,
 	long_long.c, mips_pro.c, nodebug.c, opaque0.c, opaque1.c,
 	printcmds.c, ptype.c, recurse.c, restore.c, return.c, run.c,
 	scope0.c, scope1.c, setshow.c, setvar.c, shmain.c, shr1.c, shr2.c,
 	sigall.c, signals.c, so-impl-ld.c, so-indr-cl.c, solib.c,
 	solib1.c, solib2.c, step-test.c, twice.c, varargs.c, watchpoint.c,
 	whatis.c} Add C++ compatible function definitions and return
 	types, add includes for library functions.
	* gdb.base/ptype.c (my_false, my_true): Use instead of false/true.
	* gdb.base/step-test.c (myglob): Rename from glob.
	* gdb.base/attach.c, attach2.c, average.c, execd-prog.c,
 	foll-exec.c, foll-fork.c, foll-vfork.c, sum.c, vforked-prog.c: New
 	files, move here from gdb.hp.
	* gdb.base/annota1.exp, break.exp, call-ar-st.exp, call-rt-st.exp,
 	commands.exp, condbreak.exp, define.exp, ena-dis-br.exp,
 	ending-run.exp, jump.exp. list.exp, long_long.exp, so-impl-ld.exp:
 	Adjust line numbers in regexps.

	* gdb.base/all-bin.exp, eval-skip.exp, exprs.exp, logical.exp,
	miscexprs.exp, pointers.exp, relational.exp: Use $true and $false
	instead of 0/1.

	* gdb.base/attach.exp, dbx.exp, foll-exec.exp, foll-fork.exp,
	foll-vfork.exp: New files, move here from gdb.hp.
	* gdb.base/page.exp: New file, test of pagination command.

	* gdb.base/watchpoint.c (recurser): New function, for watchpoint
	recursion test.
	* gdb.base/watchpoint.exp: Add more test cases for watchpoints.

	* gdb.base/so-impl-ld.exp, gdb.base/so-indr-cl.exp,
 	gdb.base/solib.exp: Fix compiler invocation process.

	* gdb.base/callfuncs.exp, gdb.base/callfuncs2.exp: Don't xfail for
 	HP-UX 11, turn off overload resolution explicitly.
	* gdb.base/commands.exp: Set argument list explicitly, add
 	watchpoint test.
	* gdb.base/completion.exp: Enable if HP-UX, tweak tests to make
	them work.
	* gdb.base/constvars.exp, gdb.base/volatile.exp: Escape the
	expressions properly.
	* gdb.base/corefile.exp: Loosen the match slightly.
	* gdb.base/default.exp: Allow "Error accessing memory" message
	also.
	* gdb.base/display.exp: Skip over x/0 j if PA64.
	* gdb.base/funcargs.exp: Add xfails for HP-UX.
	* gdb.base/interrupt.exp: Ditto.
	* gdb.base/langs.exp: Add symbolic matches governed by compiler
	in use.
	* gdb.base/list.exp: Add xfails for HP-UX.
	* gdb.base/long_long.exp: Refine some of the numeric matches.
	* gdb.base/mips_pro.exp: Xfail on HP-UX.
	* gdb.base/miscexprs.exp: Add PA2.0 case for array size test.
	* gdb.base/nodebug.exp: Succeed on more varieties of output.
	* gdb.base/opaque.exp: Remove some HP-UX xfails.
	* gdb.base/ptype.exp: Succeed on more varieties of output.
	* gdb.base/scope.exp: Add xfails for HP-UX.
	* gdb.base/sect-cmd.exp: Add more cases.
	* gdb.base/setvar.exp: Add xfails for HP-UX.
	* gdb.base/shlib-call.exp: Loosen some matches slightly.
	* gdb.base/signals.exp: Match on void symbolically.
	* gdb.base/step-test.exp: Add case for PA64.
	* gdb.base/term.exp: Add exit and restart.
	* gdb.base/twice.exp: Clean up after self.
	* gdb.base/varargs.exp: Disable overload resolution explicitly.
	* gdb.base/whatis.exp: Allow more ways to pass tests.

	* gdb.base/smoke.exp, gdb.base/smoke.c, gdb.base/smoke.cc: Remove,
 	no longer useful.

Fri Jun 25 19:27:28 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* lib/gdb.exp (proc gdb_expect_list): New procedure.  Matches a
 	list of patterns.
	* gdb.base/call-ar-st.exp: Use gdb_expect_list in "print
 	print_double_array(double_array)", "continuing to breakpoint
 	1018", "print print_double_array(array_d)" and "continuing to
 	1034" tests.
	
1999-06-24  Jason Molenda  (jsm@bugshack.cygnus.com)

        * Makefile.in: Add empty html and install-html targets.

1999-06-24  Stan Shebs  <shebs@andros.cygnus.com>

	* config/mt-*: Remove, these haven't been used since 1996.

1999-06-22  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/call-strs.c, gdb.base/ending-run.c,
 	gdb.base/step-test.c: Include stdlib.h and string.h as needed.
	* gdb.c++/member-ptr.exp: Skip over these tests if using G++.

1999-06-18  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.c++/overload.exp: XFAIL everything if using G++, add a
	simpler match case for the ptype of the big class.

1999-06-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.exp: Fix test for gdb_prompt existence.

1999-06-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.exp (gdb_test): Add fail after calls to perror.

1999-06-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.exp (gdb_test): Accept variations of Undefined command messages.

1999-06-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.exp (gdb_test): Fix anchors on gdb_expect statement.

Fri Jun 11 12:56:50 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/call-strs.c (link_malloc): New function.  Ensure that
 	malloc() is linked in.

1999-06-08  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdb.base/ending-run.exp: Make sure we fail and do not timeout at
	step at end.

	* gdb.base/annota1.exp: Increase match_max to prevent timeout.

1999-06-08  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.java/jv-print.exp: New file.  (Our first Java test!)

Fri Jun  4 10:47:46 1999  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/a1-selftest.exp: Remove bogus hppa xfail.
	* gdb.base/mips_pro.exp: Likewise.

1999-06-02  Keith Seitz  <keiths@cygnus.com>

	* gdb.c++/templates.cc: Change all "new" operators to throw
	an exception.
	* gdb.c++/cplusfuncs.cc: Likewise.

	* gdb.base/Makefile.in (EXECUTABLES): Add smoke1, annota1, and annota2.

Wed Jun  2 17:37:05 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/condbreak.exp: Use rerun_to_main to start the program.
        * gdb.base/ending-run.exp: When stepping out of main, accept a
        step into an arbitrary assembler file.

1999-05-20  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/annota1.exp: Allow any number of "frames-invalid" and 
	"breakpoint-invalid" to be printed.
	* gdb.base/annota2.exp: Revise line number for main breakpoint. Allow any 
	number of "frames-invalid" and "breakpoint-invalid" to be printed.
	* gdb.base/annota2.cc: Initialize a.x to 0.

1999-05-17  Keith Seitz  <keiths@cygnus.com>

	* gdb.base/call-ar-st.exp: Skip "print print_double_array (double_array)"
	when "skip_float_tests" set.
	Ditto for "print print_double_array(array_d)", "print print_small_structs",
	"print print_ten_doubles", and "step into print_long_arg_list".
	Don't assume we can step into "print_long_arg_list": we could step into memcpy.
	* gdb.base/call-rt-st.exp: Don't run float-related tests when "skip_float_tests"
	is set: "print print_one_double(*d1)" and "print print_two_floats(*f3)".
	* gdb.base/funcargs.exp: Don't run "float_and_integral_args" when
	"skip_float_tests" is set.
	* gdb.base/varargs.exp: Skip "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)"
	when "skip_float_tests" set.
	
1999-05-06  Keith Seitz  <keiths@cygnus.com>

	* gdb.base/annota2.cc: Include stdio.h.

Wed May  5 17:44:31 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/crossload.exp: Remove, this has been disabled ever
	since BFD stopped including all targets, and cross-GDB gets
	plenty of testing anyway.
	* gdb.base/i486-elf.u, gdb.base/m68k-aout.u, gdb.base/m68k-elf.u,
 	gdb.base/sparc-aout.u, gdb.base/i860-elf.u, gdb.base/m68k-aout2.u,
 	gdb.base/mips-ecoff.u, gdb.base/sparc-elf.u: Remove.
	* gdb.base/README: Remove, was doc for this.
	* gdb.base/Makefile.in (CROSS_EXECUTABLES): Remove, no longer
 	needed.

1999-05-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/call-ar-st.exp: Fix one regular expression in test
	output.

	* gdb.base/annota1.exp: New file. Annotation level 2 tests.
	* gdb.base/annota2.exp: New file. More annotation tests.
	* gdb.base/annota1.c: New file. Source file for annota1.exp.
	* gdb.base/annota2.cc: New file. Source file for annota2.exp.

1999-04-23  Angela Marie Thomas <angela@cygnus.com>

	* config/cfdbug.exp: New file.

1999-04-20  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.c++/demangle.exp (test_gnu_style_demangling): Add tests for
	Marcus Daniel's and Dale Hawkins's demangler crashes.

	* gdb.c++/demangle.exp (test_gnu_style_demangling,
 	test_lucid_style_demangling, test_arm_style_demangling,
 	test_hp_style_demangling): Try Tom Tromey's core-dumping
 	identifier under each demangling style.

1999-04-07  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.c++/demangle.exp: Include the current demangling style
	in all test names.
	(current_demangling_style): New global variable.
	(set_demangling_style, test_demangling_core, test_demangling,
	test_demangling_exact): New functions.
	(test_gnu_style_demangling, test_lucid_style_demangling,
	test_arm_style_demangling, test_hp_style_demangling): Use those,
	instead of calling gdb_test and gdb_test_exact directly.
	(catch_demangling_errors): New function, which reports errors
	signalled by the demangling test functions in an orderly way.
	(do_tests): Use catch_demangling_errors.

1999-04-06  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/signals.exp (test_handle_all_print): Use () for
 	grouping in expressions, not {}.

	* gdb.base/smoke.exp: Test value of x, not y.  The latter isn't
 	initialized yet.

1999-04-01  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.c++/derivation.exp: Pass ptype tests if synthesized methods
	are listed.

1999-03-26  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.stabs/weird.exp: Test for CC being defined before
	looking at its value.

1999-03-25  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/call-ar-st.exp: Remove stray '#'.
	* gdb.base/miscexprs.exp: Allow "short" and "long" as well as
	"short int" and "long int".
	* gdb.c++/overload.cc: Cast the string added in the previous
 	change, to mollify finicky HP compiler.
	* gdb.hp/reg-test.exp (testfile): Fix file name.
	* gdb.stabs/weird.exp: Don't try to run if HP compiler in use.
	
	* gdb.c++/misc.cc (main): Initialize obj_with_enum.
	* gdb.c++/classes.exp: Fix test of obj_with_enum values, allow
	alternate form of enum ptype.

1999-03-23  Stan Shebs  <shebs@andros.cygnus.com>

	* lib/gdb.exp (skip_hp_tests): Remove gcc_used argument.
	* gdb.hp/*.exp: Change all to run compiler probe only after
 	passing skip_hp_tests, so as not to waste time on guaranteed
 	failure.

	* gdb.c++/overload.cc: Pass string instead of char addr, always
	init ccpfoo.
	* gdb.c++/templates.cc: Fix syntax error.

Tue Mar 23 14:56:36 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.base/commands.exp: Add test for correct position of '>'
	when issuing the 'commands' command after a 'while' or 'if' 
	command.

1999-03-18  James Ingham  <jingham@cygnus.com>

	* gdb.c++/ovldbreak.exp: Use gdb_continue_to_end

	* gdb.c++/method.exp: It was testing an uninitialized int on the
	stack and assuming it was positive.

	* gdb.base/watchpoint.exp: Use gdb_continue_to_end.

	* gdb.base/step-test.exp: Catch a case where finish is broken and
	keep it from killing the rest of the tests. 
	Use gdb_continue_to_end.

	* gdb.base/sigall.exp: use gdb_continue_to_end.

	* gdb.base/ena-dis-br.exp: use gdb_continue_to_end.

	* gdb.base/display.exp: use runto_main, not run.

	* gdb.base/default.exp: Check for the current error message in the 
	r abbreviation test.  
	Add strongarm to the targets that know info float.

	* gdb.base/condbreak.exp: Use the gdb_run command rather than just 
	run which doesn't work with monitors.

	* gdb.base/call-ar-st.exp: fixed bogus regexp in continuing to 1034 test.

	* gdb.base/break.exp: use the gdb_continue_to_end proc.

	* lib/gdb.exp: I had added gdb_continue_to_end used to run to the end of a
	program.  Traps the case (in Cygmon) when the program never really 
	exits.  Same as Mark's continue_to_exit, but I had put it in a lot 
	more places, so I used my name.  Sorry Mark...

	* config/monitor.exp (gdb_target_monitor): added another
	target_info parameter: remotebinarydownload.  This will set the
	remotebinarydownload flag if this is causing some boards trouble.

1999-03-18  Mark Salter  <msalter@cygnus.com>

	* lib/gdb.exp (continue_to_exit): New function.

	* gdb.base/ena-dis-br.exp: Clean up for remote targets.
	* gdb.base/ending-run.exp: Ditto.
	* gdb.base/step-test.exp: Ditto.

1999-03-16  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/miscexprs.c: Clean up file, clear cbig.c[0] explicitly
	(suggested by Art Haas <ahaas@neosoft.com>).

1999-03-16  Jim Blandy  <jimb@zwingli.cygnus.com>

 	* gdb.base/signals.exp: Filter out *-*-linux* before matching *-*-gnu*.

Fri Mar 12 18:06:21 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.c++/ref-types.exp, ref-types2.exp: Allow alternate
 	descriptions of types (short unsigned int vs unsigned short, etc).

1999-03-12  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/call-strs.exp: Don't assume that `step' will step over
	a call to strlen; sometimes we do have sources.

1999-03-08  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/call-ar-st.c (main): Terminate char_array with a null
 	character, so GDB won't print garbage after its end.
	
	* gdb.base/call-ar-st.exp: Don't step into sum_array_print; set a
	breakpoint there instead.  Sometimes GCC emits memcpy to handle
	the large structures being passed by value, so we step into that
	instead of sum_array_print, which obscures what we're really testing.
	* gdb.base/step-test.exp: However, we do want a test that notices
 	the bizarre steps into memcpy, so do that here.  Add check for
 	stepping into function calls that pass large structures by value.
  	("Is that a noun clause, or are you just happy to see me?")
	Remove all references to specific line numbers.
	* gdb.base/step-test.c (struct rhomboidal, large_struct_by_value):
	New type and function.
	(main): Call large_struct_by_value, passing it a large struct by value.
	* lib/gdb.exp (gdb_get_line_number): New function.

	* gdb.base/step-test.exp: Rewrite `stepi' and `nexti' tests to be
	more portable.

1999-03-08  Jim Blandy  <jimb@zwingli.cygnus.com>

	* lib/gdb.exp: Doc fixes.

1999-03-05  Nick Clifton  <nickc@cygnus.com>

	* gdb.base/a2-run.exp: Add expected fails for strongarm-coff. 

1999-03-04  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/display.exp: Don't exercise the "detach" and "kill"
 	commands.  They're not germane to this test, and they don't work
 	that way on remote targets.

1999-03-03  James Ingham  <jingham@cygnus.com>

	* browser.test: Fixed up to match the new function browser.
	This is not done yet...

	* srcwin.test: Check for errors when the bbox is called for a text 
	item that is not on screen (so bbox is "").  Return something more 
	useful.

1999-03-01  James Ingham  <jingham@cygnus.com>

	* Changelog entries merged over from gdb development branch.

       1999-01-12  Martin Hunt  <hunt@cygnus.com>

	       * gdb.gdbtk/srcwin.test: Add a bunch of tests for the source
	       window filename and function comboboxes.  Add in stack tests.

       1999-01-11  Martin Hunt  <hunt@cygnus.com>

	       * gdb.gdbtk/srcwin.test: New file. Source Window tests.
	       * gdb.gdbtk/srcwin.exp: New file. Source Window tests.

       Wed Jan  6 09:22:52 1999  Keith Seitz  <keiths@cygnus.com>

	       * gdb.gdbtk/c_variable.test (c_variable-1.9): Add new
	       test to check for creation of a variable that is really a type.
	       (c_variable-7.81): Use "output" instead of "print" to get PC.
	       Include missing bits of test.

	       * gdb.gdbtk/cpp_variable.test (cpp_variable-1.6): Default format
	       is now "natural", not "hexadecimal"
	       (cpp_variable-2.22): Ditto.
	       (cpp_variable-2.24): Force format to hex before getting value.

	       * gdb.gdbtk/cpp_variable.exp: Supply missing arg to gdbtk_analyze_results.

       Tue Jan  5 12:40:52 1999  Keith Seitz  <keiths@cygnus.com>

	       * gdb.gdbtk/c_variable.c, c_variable.test, c_variable.exp: New C
	       language tests for variable object interface.

	       * gdb.gdbtk/cpp_variable.h, cpp_variable.cc, cpp_variable.test,
	       cpp_variable.exp: New C++ language tests for variable object
	       interface.

	       * gdb.gdbtk/Makefile.in (EXECUTABLES): Add c_variable and cpp_variable.

       Tue Jan  5 12:33:47 1999  Keith Seitz  <keiths@cygnus.com>

	       * lib/gdb.exp (gdbtk_analyze_results): Generic function
	       for outputting results of test run.

	       * gdb.gdbtk/defs (gdbtk_test): Handle xpass and xfail.
	       (gdbtk_test_error): New proc which handles error aborts.

	       * gdb.gdbtk/console.exp: Use gdbtk_analyze_results.
	       Check if we have a valid DISPLAY before running.
	       * gdb.gdbtk/browser.exp: Ditto.

       1998-12-07  Martin M. Hunt  <hunt@cygnus.com>

	       * lib/gdb.exp (gdbtk_start): Fix path for itcl library.
	       * gdb.gdbtk/browser.test: Change "manage open" to ManagedWin::open.
	       * gdb.gdbtk/console.test: Same.
	       * gdb.gdbtk/*: Update from devo.

       Fri Jul 24 14:57:19 1998  Keith Seitz  <keiths@cygnus.com>

	       * gdb.gdbtk/Makefile.in: Add new example program "stack".
	       * gdb.gdbtk/browser.test,browser.exp: Add browser window
		 tests.
	       * gdb.gdbtk/stack1.c,stack2.c: Test case for browser window.

1999-02-25  Felix Lee  <flee@cygnus.com>

	* lib/gdb.exp (debug_format): initialize

1999-02-25  Jason Molenda  (jsm@bugshack.cygnus.com)

	* gdb.base/call-ar-st.c: Include string.h, not strings.h.
	* gdb.base/call-rt-st.c: Ditto.

1999-02-13  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.threads/pthreads.exp (horiz): New variable.
	(test_startup): Fix regexps that capture thread numbers.

1999-02-10  Jason Molenda  (jsm@bugshack.cygnus.com)

	* gdb.base/smoke.exp: Disambiguate two test case names (both
	called ``print'').

Fri Feb  5 12:42:56 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/volatile.exp: Use gdb_test, add xfails for GCC
 	compilation.

1999-02-04  Jason Molenda  (jsm@bugshack.cygnus.com)

	* gdb.base/miscexprs.exp: Change patterns to match GDB's
	actual output formatting.
	* gdb.base/smoke.exp: GDB removes leading 0's.
	* gdb.base/volatile.exp: Don't check type of remuneration;
	that variable is no longer defined in constvars.c.
	* gdb.base/step-test.c (main): Exit with explicit exit code.
	* gdb.base/step-test.exp: Remove two nexti checks--they are
	not portable.

1999-02-04  Jason Molenda  (jsm@bugshack.cygnus.com)

	* gdb.base/help.exp ("help delete display"): Fix test to match
	gdb's output.

	* gdb.base/long_long.c (known_types): Initialize values to zero.
	* gdb.base/long_long.exp: Step one more line
	so 'dec' is initialized in "get to known place".  GDB removes
        leading zeros.  Explicitly ask for hex formatting.  Use 
        unique test case names.

Tue Feb  2 10:16:08 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* lib/gdb.exp (gdb_preprocess): Remove 'puts' statement. 

	* gdb.c++/method.exp: Add missing close brace.

1999-01-30  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/maint.exp: Use 'set height 0' to disable page
	prompting, not 'set height 400'.

	Fix a bunch of timeouts.
	* gdb.base/maint.exp ("maint print objfiles"): Break this up into
	four separate tests, so expect doesn't take forever to match a ton
	of text against a regexp with lots of .* forms.
	("maint print psymbols", "maint print symbols"): Make some of
	these greps more selective, so that expect doesn't try to wade
	through huge piles of output and time out.

	* gdb.base/maint.exp ("maint print msymbols"): Fix pattern.

	* gdb.base/maint.exp ("maint info breakpoints"): Split into two
 	tests: one which doesn't expect shlib events to be reported, and
 	another which does, but is XFAIL for all platforms other than
 	HP/UX.

	* gdb.base/break.exp: Teach the test suite that the `catch
	fork', `catch vfork', and `catch exec' commands produce error
	messages on platforms that don't provide these features.

Mon Jan 25 18:35:56 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.hp/gen-so-thresh.c, so-thresh.sh, so-thresh.exp,
 	so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base
 	(shortening names from solib_threshold.exp etc), won't run on
 	anything but HP-UX for the foreseeable future.
	* gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to
 	reflect move.

Thu Jan 21 15:46:49 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/Makefile.in, gdb.c++/Makefile.in,
 	gdb.trace/Makefile.in (clean): Remove all test executables.

Tue Jan 19 17:20:09 1999  David Taylor  <taylor@texas.cygnus.com>

	* gdb.base/shlib-call.exp: add test cases to verify that gdb
	successfully re-sets breakpoints in shared libraries.
	* gdb.base/shmain.c (main): return 0, don't fall off the end.

Fri Jan 15 14:04:57 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdb.hp/xdb3.exp: do not execute unless on hppa-hpux platform 
	and compiled w/o GCC. 

	* gdb.hp/watch-cmd.exp: ditto.

	* gdb.hp/watch-hp.exp: ditto.

	* gdb.hp/xdb1.exp: ditto.

	* gdb.hp/xdb2.exp: ditto.

	* gdb.hp/dbx.exp: ditto.

Thu Jan 14 18:36:48 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* constvars.c: Remove C++-isms.
	* constvars.exp: Use gdb_test everywhere, add xfails if compiled
 	with GCC.

Mon Jan 11 10:08:03 1999  David Taylor  <taylor@texas.cygnus.com>

	The following changes are part of the HP merge.

	* gdb.base/break.exp: new tests to verify that catchpoints for
	fork, vfork, and exec don't trigger inappropriately.

	* gdb.base/opaque.exp: compile one file at a time, then link.

	* gdb.base/signals.exp: be more restrictive about which hppa
	systems receive a setup_xfail.  new tests.

	* gdb.base/solib_threshold.build: new file.
	* gdb.base/solib_threshold.exp: new file.
	* gdb.base/solib_threshold.link_opts: new file.
	* gdb.base/solib_threshold.mk: new file.
	* gdb.base/gen_solib_threshold.c: new file.

	* gdb.c++/classes.exp: if on HPUX and not using gcc, skip the
	tests.  New tests for enums inside classes.

	* gdb.c++/compiler.cc: indicate support of template debugging.

	* gdb.c++/demangle.exp: run hp style demangling tests.

	* gdb.c++/inherit.exp: if on HPUX and not using gcc, skip the
	tests.

	* gdb.c++/misc.cc: changes to support new tests.

	* gdb.c++/templates.cc: changes to support HP's compiler; changes
	to support new tests.

	* gdb.c++/virtfunc.exp: if we are on HPUX and we are not using
	gcc, then skip these tests.

Sun Jan 10 23:44:11 1999  David Taylor  <taylor@texas.cygnus.com>

	The following files are part of the HP merge; some had longer
	names at HP, but have been renamed to be no more than 14
	characters in length.

	* gdb.hp/ambiguous.cc: new file.
	* gdb.hp/ambiguous.exp: new file.
	* gdb.hp/attach.exp: new file.
	* gdb.hp/attach2.exp: new file.
	* gdb.hp/classes-hp.exp: new file.
	* gdb.hp/ctti.exp: new file.
	* gdb.hp/ctti-add.cc: new file.
	* gdb.hp/ctti-add1.cc: new file.
	* gdb.hp/ctti-add2.cc: new file.
	* gdb.hp/ctti-add3.cc: new file.
	* gdb.hp/dbx.exp: new file.
	* gdb.hp/exception.cc: new file.
	* gdb.hp/exception.exp: new file.
	* gdb.hp/foll-exec.c: new file.
	* gdb.hp/foll-exec.exp: new file.
	* gdb.hp/foll-fork.c: new file.
	* gdb.hp/foll-fork.exp: new file.
	* gdb.hp/foll-vfork.c: new file.
	* gdb.hp/foll-vfork.exp: new file.
	* gdb.hp/inherit-hp.exp: new file.
	* gdb.hp/more-steps.exp: new file.
	* gdb.hp/namespace.cc: new file.
	* gdb.hp/namespace.exp: new file.
	* gdb.hp/optimize.exp: new file.
	* gdb.hp/pxdb.c: new file.
	* gdb.hp/pxdb.exp: new file.
	* gdb.hp/quicksort.exp: new file.
	* gdb.hp/reg-test.exp: new file.
	* gdb.hp/reg-test.s: new file.
	* gdb.hp/sized-enum.c: new file.
	* gdb.hp/sized-enum.exp: new file.
	* gdb.hp/start-stop.exp: new file.
	* gdb.hp/templ-hp.cc: new file.
	* gdb.hp/templ-hp.exp: new file.
	* gdb.hp/thr-lib.c: new file.
	* gdb.hp/thr-lib.exp: new file.
	* gdb.hp/thr-lib.h: new file.
	* gdb.hp/thr-liblib.c: new file.
	* gdb.hp/virtfun-hp.c: new file.
	* gdb.hp/virtfun-hp.exp: new file.
	* gdb.hp/watch-cmd.exp: new file.
	* gdb.hp/watch-hp.exp: new file.
	* gdb.hp/xdb1.exp: new file.
	* gdb.hp/xdb2.exp: new file.
	* gdb.hp/xdb3.exp: new file.

Wed Jan  6 18:41:15 1999  David Taylor  <taylor@texas.cygnus.com>

	The following files are part of the HP merge; some had longer
	names at HP, but have been renamed to be no more than 14
	characters in length.

	* gdb.base/ss.h: new file.
	* gdb.base/call-ar-st.c: new file.
	* gdb.base/call-ar-st.exp: new file.
	* gdb.base/call-rt-st.c: new file.
	* gdb.base/call-rt-st-exp: new file.
	* gdb.base/call-strs.exp: new file.
	* gdb.base/ena-dis-br.exp: new file.
	* gdb.base/environ.exp: new file.
	* gdb.base/long_long.exp: new file.
	* gdb.base/sect-cmd.exp: new file.
	* gdb.base/shlib-cl2.exp: new file.
	* gdb.base/smoke.exp: new file.
	* gdb.base/so-impl-ld.c: new file.
	* gdb.base/so-impl-ld.exp: new file.
	* gdb.base/so-indr-cl.c: new file.
	* gdb.base/so-indr-cl.exp: new file.
	* gdb.base/varargs.exp: new file.
	* gdb.base/volatile.exp: new file.
	* gdb.base/whatis-exp.exp: new file.
	* gdb.base/display.exp: new file.
	* gdb.c++/derivation.exp: new file.
	* gdb.c++/local.exp: new file.
	* gdb.c++/member-ptr.exp: new file.
	* gdb.c++/overload.exp: new file.
	* gdb.c++/ovldbreak.exp: new file.
	* gdb.c++/ref-types.exp: new file.
	* gdb.c++/ref-types2.exp: new file.
	* gdb.c++/userdef.exp: new file.
	
Wed Jan  6 13:50:57 1999  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/default.exp: Reflect wording change in remote.c.

Tue Jan  5 19:14:51 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/help.exp: Update to reflect current text.

Tue Jan  5 13:05:32 1999  David Taylor  <taylor@texas.cygnus.com>

	* gdb.c++/anon-union.cc: make foo and bar global, otherwise
	they're stack variables and contain garbage.
	* gdb.c++/anon-union.exp: new file.

	The following changes were made by David Taylor
 	<taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and
 	Edith Epstein <eepstein@cygnus.com> as part of a project to merge
 	in changes by HP.

	* gdb.base/bitops.exp: new file.
	* gdb.base/default.exp: change expected messages for catch and
	info catch tests to reflect HP merge changes.
	* gdb.base/enable-disable-break.exp
	* gdb.base/ending-run.c: new file.
	* gdb.base/long_long.c: new file.
	* gdb.base/maint.exp: new file.
	* gdb.base/pointers2.exp: new file.
	* gdb.base/shlib-call2.exp: new file.
	* gdb.base/solib.exp: new file.
	* gdb.base/step-test.c: new file.
	* gdb.c++/anon-union.cc: new file.
	* gdb.c++/local.cc: new file.
	* gdb.c++/member-pointer.cc: new file.
	* gdb.c++/method.cc: new file.
	* gdb.c++/ref-types.cc: new file.
	* gdb.c++/ref-types2.cc: new file.
	* gdb.c++/userdef.cc: new file.
	
	* gdb.base/scope.exp: compile one file at a time, then link.
	* gdb.base/langs.exp: ditto.
	* gdb.base/list.exp: ditto.
	
Mon Jan  4 10:06:43 1999  David Taylor  <taylor@texas.cygnus.com>

	The following changes were made by David Taylor
 	<taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and
 	Edith Epstein <eepstein@cygnus.com> as part of a project to merge
 	in changes by HP.
	
	* gdb.c++/inherit.exp: if on hppa*-*-hpux* and not using gcc,
	skip tests.  When compiling pass c++ flag to gdb_compile.
	* gdb.c++/
	
	* lib/gdb.exp (get_compiler_info): new, optional argument -- args;
	test for on hppa*-*-hpux*; use args to see if c++ was specified.
	(skip_hp_tests): new function.
	(gdb_preprocess): new function.

	* configure.in (hpdir): decide whether to configure gdb.hp.
	* configure: regenerated.

	* gdb.base/Makefile.in (MISCELLANEOUS): new macros -- extra things
	to delete on clean.
	(EXECUTABLES): update to reflect new additions.
	* gdb.base/commands.exp: update message expected.
	* gdb.base/default.exp: add copyright notice.
	* gdb.base/funcargs.exp (timeout): if hpux, increase timeout.
	* gdb.base/help.exp: update messages to reflect current text.
	* gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled
	targets for recurse tests.
	* gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then
	skip this file.

	* gdb.c++/Makefile.in (PROGS): update to reflect new executables.
	* gdb.c++/cplusfuncs.exp: tell gdb_compile that it's a c++
	compilation.
	* gdb.c++/misc.exp: ditto.
	* gdb.c++/templates.exp: if we're on hpux and it's not gcc, don't
	run the tests.  tell gdb_compile that it's a c++ compilation.

	* gdb.threads/pthreads.exp: fix typo in message.
	
	* gdb.base/all-bin.exp: new file.
	* gdb.base/arithmet.exp: new file.
	* gdb.base/assign.exp: new file.
	* gdb.base/completion.exp: new file.
	* gdb.base/cond-expr.exp: new file.
	* gdb.base/condbreak.exp: new file.
	* gdb.base/define.exp: new file.
	* gdb.base/dollar.exp: new file.
	* gdb.base/environment.exp: new file.
	* gdb.base/eval-skip.exp: new file.
	* gdb.base/jump.exp: new file.
	* gdb.base/logical.exp: new file.
	* gdb.base/pointers.exp: new file.
	* gdb.base/relational.exp: new file.
	* gdb.base/section_command.exp: new file.
	* gdb.base/whatis-expr.exp: new file.

	* gdb.base/all-types.c: new file.
	* gdb.base/call-array-struct.c: new file.
	* gdb.base/call-return-struct.c: new file.
	* gdb.base/call-strings.c: new file.
	* gdb.base/callfuncs2.c: new file.
	* gdb.base/condbreak.c: new file.
	* gdb.base/constvars.c: new file.
	* gdb.base/display.c: new file.
	* gdb.base/int-type.c: new file.
	* gdb.base/jump.c: new file.
	* gdb.base/miscexprs.c: new file.
	* gdb.base/pointers.c: new file.
	* gdb.base/pointers2.c: new file.
	* gdb.base/shmain.c: new file.
	* gdb.base/shr1.c: new file.
	* gdb.base/shr2.c: new file.
	* gdb.base/solib.c: new file.
	* gdb.base/solib1.c: new file.
	* gdb.base/solib2.c: new file.
	* gdb.base/varargs.c: new file.
	* gdb.c++/derivation.cc: new file.
	* gdb.c++/overload.cc: new file.
	* gdb.c++/ovldbreak.cc: new file.
	* gdb.hp/attach.c: new file.
	* gdb.hp/attach2.c: new file.
	* gdb.hp/average.c: new file.
	* gdb.hp/compiler.c: new file.
	* gdb.hp/compiler.cc: new file.
	* gdb.hp/execd-program.c: new file.
	* gdb.hp/follow-exec.c: new file.
	* gdb.hp/follow-fork.c: new file.
	* gdb.hp/follow-vfork-and-exec.c: new file.
	* gdb.hp/misc-hp.cc: new file.
	* gdb.hp/more-steps.c: new file.
	* gdb.hp/optimize.c: new file.
	* gdb.hp/quicksort.c: new file.
	* gdb.hp/run-hp.c: new file.
	* gdb.hp/start-stop.c: new file.
	* gdb.hp/sum.c: new file.
	* gdb.hp/templates-hp.cc: new file.
	* gdb.hp/thread-local-in-lib.c: new file.
	* gdb.hp/thread-local-in-lib.h: new file.
	* gdb.hp/thread-local-in-lib.lib.c: new file.
	* gdb.hp/vforked-program.c: new file.
	* gdb.hp/virtfunc-hp.cc: new file.
	* gdb.hp/watchpoint-hp.c: new file.
	* gdb.hp/xdb.c: new file.
	* gdb.hp/xdb0.c: new file.
	* gdb.hp/xdb0.h: new file.
	* gdb.hp/xdb1.c: new file.

Mon Dec 21 14:08:38 1998  David Taylor  <taylor@texas.cygnus.com>

	The following change was made by Edith Epstein
 	<eepstein@cygnus.com> as part of a project to merge in changes
 	originally made by HP; HP did not create ChangeLog entries.

	* gdb.c++/demangle.exp: changed the expected output for some
	ARM-style mangling -- removed second reference to datatype.
 	For example, maint demangle __dt__11T1__pt__2_cFv
                     T1<char>::~T1<char>(void)
	becomes,
	             maint demangle __dt__11T1__pt__2_cFv
                     T1<char>::~T1(void)

 	(test_hp_style_demangling): new hp specific demangling test cases.
	
Mon Dec 14 15:07:03 1998  Jeffrey A Law  (law@cygnus.com)

	* gdb.trace/actions.exp: Ignore compiler warnings compiling actions.c
	* gdb.trace/backtrace.exp: Likewise.
	* gdb.trace/circ.exp: Likewise.
	* gdb.trace/collection.exp: Likewise.
	* gdb.trace/deltrace.exp: Likewise.
	* gdb.trace/infotrace.exp: Likewise.
	* gdb.trace/limits.exp: Likewise.
	* gdb.trace/packetlen.exp: Likewise.
	* gdb.trace/passc-dyn.exp: Likewise.
	* gdb.trace/passcount.exp: Likewise.
	* gdb.trace/report.exp: Likewise.
	* gdb.trace/save-trace.exp: Likewise.
	* gdb.trace/tfind.exp: Likewise.
	* gdb.trace/tracecmd.exp: Likewise.
	* gdb.trace/while-dyn.exp: Likewise.
	* gdb.trace/while-stepping.exp: Likewise.

1998-12-07  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdb.base/restore.exp, gdb.base/restore.c: New tests.

Wed Dec  2 20:03:53 1998  Stan Shebs  <shebs@andros.cygnus.com>

	From Brendan Kehoe:
	* gdb.c++/cplusfuncs.cc, misc.cc, virtfunc.cc: Add now-required
	int return types.

Sat Oct 24 18:04:22 1998  Felix Lee  <flee@cygnus.com>

	* config/slite.exp (gdb_load): use gdb_file_cmd, so we can do
 	remote dos host testing right.

Mon Oct 19 01:31:59 1998  Felix Lee  <flee@cygnus.com>

	* gdb.base/corefile.exp: remove some xfails.

Thu Oct 15 10:04:38 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/reread.exp: Sleep 1 - ensures that the two executables
 	have different timestamps.

Thu Oct  1 20:56:14 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* lib/gdb.exp, gdb.base/default.exp, config/monitor.exp,
 	gdb.base/default.exp: Replace "exec" with "executable".

Tue Sep 29 15:06:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/default.exp: Change else if to elseif from previous
 	delta.

Mon Sep 28 13:21:43 1998  Nick Clifton  <nickc@cygnus.com>

	* gdb.base/default.exp: Add brace missing from previous delta.

Mon Sep 21 14:39:27 1998  Nick Clifton  <nickc@cygnus.com>

	* gdb.base/default.exp: Support test for info float for all
	varieties of arm toolchain.

Fri Sep 18 14:07:44 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.trace/*.exp: remove "remote_download" command.

Wed Sep 16 11:38:21 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.trace/*.exp: remove -gdwarf from compile.

Wed Sep 16 01:23:11 1998  Felix Lee  <flee@cygnus.com>

	* gdb.trace/configure.in(AC_INIT): typo
	* gdb.trace/configure: regenerated

Mon Sep 14 20:00:04 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* config/m68k-emc.exp: New file.
	* lib/<emc-support.exp trace-support.exp}: New files.
	* configure.in: add new test directory gdb.trace.
	* gdb.trace/{configure configure.in Makefile.in}: New files.
	* gdb.trace/{actions.c actions.exp gdb_c_test.c}: New files.
	* gdb.trace/{circ.c circ.exp limits.c limits.exp}: New files.
	* gdb.trace/{collection.c collection.exp tfind.exp }: New files.
	* gdb.trace/{backtrace.exp deltrace.exp infotrace.exp}: New files.
	* gdb.trace/{packetlen.exp passc-dyn.exp passcount.exp}: New files.
	* gdb.trace/{report.exp save-trace.exp tracecmd.exp}: New files.
	* gdb.trace/{while-dyn.exp while-stepping.exp}: New files.
	
Fri Sep 11 13:58:02 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.c++/classes.exp: Change all regular expressions to match
	arbitrary combinations of newline/carriage-return, so that they
	will work equally well on Unix and Windows.
	* gdb.c++/inherit.exp: ditto.
	* gdb.c++/virtfunc.exp: ditto.

1998-08-11 Dawn Perchik  <dawn@cygnus.com>

	* gdb.base/setshow.exp: Fix error introduced by call to runto_main.

Fri Jul 24 15:51:34 1998  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/am33.s: Add tests for autoincrement instructions.
	* gdb.disasm/am33.exp: Run time.  Update tests which use r8-r15
	to use a0-a3/d0-d3 as needed.

Thu Jul 16 18:20:46 1998  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/am33.s: Add 4 operand mul and mulu tests.
	* gdb.disasm/am33.exp: Corresponding changes.

1998-07-11  Felix Lee  <flee@cygnus.com>

	* gdb.base/callfuncs.exp: add cmp10 test.
	* gdb.base/callfuncs.c (cmp10): new function.

Thurs Jul 9 11:08:31 1998  Dawn Perchik  <dawn@cygnus.com>

	* gdb.base/commands.exp: Break up infrun_breakpoint_command_test 
	into two parts to get around a synchronization problem in expect.

Sun Jun 28 22:34:34 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdb.gdbtk/simple.c (main): Make main return an
	int so compiler will stop complaining.

Fri Jun 26 14:27:13 1998  Keith Seitz  <keiths@cygnus.com>

	* lib/gdb.exp (gdbtk_start): Add startup for gdbtk.

	* configure.in: Add options for gdbtk testsuite.

	* configure: Regenerate.

	* gdb.gdbtk: New directory to hold gdbtk tests.

	* gdb.gdbtk/console.{exp, test}: New console window tests.


Fri Jun 26 14:52:47 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

	* gdb.fortran/types.exp:  Escape brackets in expect patterns
	for test_float_literal_types_accepted tests.
	* gdb.base/scope.exp:  Remove extraneous newline in filelocal_bss
	before run test.

Fri Jun 26 11:12:17 1998  Jeffrey A Law  (law@cygnus.com)

	* am33.exp: Just compile, do not link the testcase.
	* am33.s: Add ".am33" pseudoop to force am33 mode.

1998-06-25  Felix Lee  <flee@cygnus.com>

	* gdb.base/setshow.exp: make sure $pc is sane.

	* gdb.stabs/weird.exp: split expect patterns properly.

Wed Jun 24 13:03:15 1998  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/am33.s: New disassembler testfile for the am33.
	* gdb.disasm/am33.exp: Run it.

Tue Jun 23 11:45:01 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/funcargs.exp: simplify expect strings to ease pattern
	match processing (and eliminate spurious timeouts when running).

Fri Jun 12 17:28:22 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/signals.exp (test_handle_all_print): put back Mach
	exception test, but conditionalize it on target [mach | gnu].

Wed Jun 10 10:40:03 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/overlays.exp: fixup compile line for linker script.

Thu Jun  4 21:54:15 1998  Felix Lee  <flee@zog.cygnus.com>

	* gdb.fortran/types.exp: don't guess at float size.

Thu May 21 02:28:37 1998  Felix Lee  <flee@zog.cygnus.com>

	* gdb.base/exprs.exp: delete test that depends on int size.

Sun May 17 17:10:22 1998  Bob Manson  <manson@charmed.cygnus.com>

	* config/sim.exp: Removed checks for target triplets.
	(gdb_target_sim): Use gdb,target_sim_options.

Sat May 16 23:43:35 1998  Mark Alexander  <marka@cygnus.com>

	* gdb.base/reread.exp: New file.
	* gdb.base/reread1.c: New file.
	* gdb.base/reread2.c: New file.

Sat May 16 23:22:09 1998  Mark Alexander  <marka@cygnus.com>

	* config/sim.exp: Use 'target sim -sparclite' when running
	SPARClite programs.

Sat May 16 18:48:08 1998  Doug Evans  <devans@canuck.cygnus.com>

	* gdb.base/structs2.exp: New file.
	* gdb.base/structs2.c: New file.

Wed May 13 13:36:14 1998  Doug Evans  <devans@canuck.cygnus.com>

	* gdb.asm/common.inc: New file.
	* gdb.asm/d10v.inc: New file.
	* asm-source.exp: Pass -I's to gas to find .inc files.
	Update line numbers in expected output.
	* asmsrc1.s: Rewrite.
	* asmsrc2.s: Rewrite.
	* configure.in: Create arch.inc symlink.
	* configure: Regenerate.
	* Makefile.in (distclean): Delete arch.inc.

Wed May  6 10:30:54 1998  John Metzler  <jmetzler@cygnus.com>

	*  callfuncs.c (t_enum_value1) : Cleanup return value warnings
 	(t_enum_value2): ditto
 	(t_enum_value3): ditto
 	(main): ditto
Fri May  1 09:33:37 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>

	* gdb.base/break.exp:  Remove xfail for `deleting all breakpoints
	when none' unexpected prompt case, fixed by breakpoint.c:delete_command
	change.
	Use gdb_test instead of send_gdb/gdb_expect sequences.

Thu Apr 23 12:56:19 1998  Jason Molenda  (crash@bugshack.cygnus.com)

	* gdb.c++/virtfunc.cc: Declare extern "C" printf to return int,
	not void.

Thu Apr 16 10:52:34 1998  John Metzler  <jmetzler@cygnus.com>

	* gdb.base/branches.c: Code with lots of loops and
 	subroutines. Used to test gdbs ability to single step through PC
 	changes, especially to test mips-tdep.c:mips_next_pc

Mon Apr 13 22:32:51 1998 Frank Ch. Eigler <fche@cygnus.com>

	* gdb.c++/virtfunc.cc: Make extern "C" printf declaration pass
	more rigorous EGCS C++ error checking.

Fri Apr 10 22:38:12 1998 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/help.exp:  Clean up `help set args' and `help show args'
        tests.                                                             
        * gdb.base/interrupt.exp:  Add "i*86-*-solaris2*" xfail for calling
        function when asleep.                                              
        * gdb.base/signals.exp:  Add "i*86-*-solaris2*" xfails. Add comment
        for i*86 Linux and SVR4 signal handling problems.                  
        Remove linux xfail for `next to handler in signals_tests_1', fixed 
        by recent infrun.c change.                                         
        Limit backtrace to 10 frames to avoid timeout problems with infinite
        stack backtraces.                                                   
        Adjust expect pattern in `handle all print' test to match Apr 28 1997
        target.[ch] change.

Tue Mar 31 00:40:32 1998  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_test): Send multiline commands one at a time; wait
	for a newline from gdb before continuing.
	(default_gdb_exit): Just look for y or n.
	(gdb_test): Detect abnormal exit from GDB running on DOS; if
	it does, fail the rests of the tests in the file.

Tue Mar 24 22:44:52 1998  Bob Manson  <manson@charmed.cygnus.com>

	* config/cygmon.exp: New file.

Mon Mar 16 21:39:11 1998  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/list.exp: Fix problem with "list default lines around
 	main" test on remote targets.

	* gdb.base/scope.exp: Fix problem with filelocal_bss before
	run test on remote targets.

Thu Mar 12 16:23:00 1998  Doug Evans  <devans@canuck.cygnus.com>

	* gdb.asm: New directory.
	* configure.in: Configure it.
	* configure: Regenerate.
	* gdb.asm/{Makefile.in,configure.in,configure}: New files.
	* gdb.asm/{asm-source.exp,asmsrc1.s,asmsrc2.s}: New files.

Mon Feb 23 08:22:44 1998  Mark Alexander  <marka@cygnus.com>

	* config/mn10300-eval.exp: New file to support MN10300 eval board.

Wed Feb 18 16:43:46 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
 
        * gdb.base/overlays (several files): Merge the two overlay
        managers into one.  Change variables (foox, barx, bazx, grbxx)
        back into ints but force them to load in their proper sections.

Thu Feb 12 13:49:30 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/d10vovly.c (D10VTranslate): Map IMAP0 to low 128k of
 	on-chip insn memory and IMAP1 to upper 128k.
	(D10VCopy): Handle memory regions crossing 16k boundaries.
	(D10VCopy): Transfer data in 32 bit chunks.

Tue Feb 10 17:23:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/overlays.c (main): Exit normally when result is
 	correct.

	* gdb.base/d10v.ld: Update LMAs to reflect current d10v address
 	map.  Include space for printf in .text segment.

	* gdb.base/d10vovly.c (D10VTranslate): New function, handle
 	updated d10v memory VMA/LMA map.
	(D10VCopy): Call D10VTranslate.
	
Fri Feb  6 14:13:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/m32rovly.c: Force variable _novlys into .data section.

	* gdb.base/bar.c (barx, bar): Change variable to small array so
 	that it won't be put into the .sdata - small data -
 	section. Update reference.
	* gdb.base/baz.c (bazx, baz): Ditto.
	* gdb.base/foo.c (foox, foo): Ditto.
	* gdb.base/grbx.c (grbxx, grbx): Ditto.

	* gdb.base/overlays.exp: Expect variables barx, bazx, foox, grbxx
 	to be arrays.
	
Thu Jan 29 14:48:19 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
 
        * gdb.base/overlays.exp: fix up and get working again.
        Add tests for backtraces from an overlay function.
 
Fri Jan 23 07:52:45 1998  Fred Fish  <fnf@cygnus.com>

	* gdb.base/watchpoint.exp: Set "d10v*-*-*" clear_xfail for
	"calling function with watchpoint enabled".

Thu Jan 22 14:23:29 1998  Fred Fish  <fnf@cygnus.com>

	* gdb.base/break.exp (test_next_with_recursion): Remove
 	gdb_suppress_tests for d10v-*-*.
	* lib/gdb.exp (gdb_suppress_tests): Disable this function
	pending review of whether it is useful or not.

Tue Jan 20 13:02:09 1998  Mark Alexander  <marka@cygnus.com>

	* gdb.base/funcargs.exp: Increase timeout for slow TX39 boards.

Mon Jan 19 08:53:04 1998  Mark Alexander  <marka@cygnus.com>

	* gdb.base/break.exp: Increase timeout for slow TX39 boards.
	* config/dve.exp: New file to support Densan boards.

Mon Dec 15 22:38:05 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/interrupt.exp: Document problem of simulators, signals,
 	reads and BSD.

Wed Nov 26 22:29:18 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/monitor.exp: Be a bit less picky about the "Remote debugging"
	response.

	* gdb.c++/misc.exp: Call runto_main instead of doint it manually.

Tue Nov 25 12:46:36 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/mips_pro.exp: Add "mips64*-*-elf" xfail for backtrace
 	test.

	* gdb.base/funcargs.exp: Query GDB for target_sizeof_int,
 	target_sizeof_long and target_bigendian_p.
	(structs_by_value, structs_by_reference): Check values according
 	to targets word size and endianess.
	
Mon Nov 24 16:37:06 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdb.base/langs.exp: For "continue to exit" ignore any trailing
 	output.

Fri Oct 17 13:24:43 1997  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/default.exp, gdb.base/help.exp, gdb.base/setshow.exp:
 	Update test of set args help to match source change.

Fri Sep 26 17:36:20 1997  Jason Molenda  (crash@pern.cygnus.com)

	* gdb.base/default.exp: Expect help system output to be in
	alphabetical order.
	* gdb.base/help.exp: Ditto.

Wed Sep 24 13:08:14 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/signals.exp: Change "i*86-pc-linux-gnu" to
	"i*86-pc-linux-gnu*".
	* gdb.base/interrupt.exp: Ditto.
	* gdb.base/corefile.exp: Ditto.

	* lib/gdb.exp(gdb_compile): If is_vxworks target feature is set,
 	define vxworks when building the testcase.

	* gdb.base/ptype.exp: Fix testnames to be unique.
	* gdb.base/radix.exp: Ditto.
	* gdb.base/term.exp: Ditto.
	* gdb.base/whatis.exp: Ditto.
	* gdb.c++/classes.exp: Ditto.

Tue Sep 16 22:21:48 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/callfuncs.exp: Fix indentation.

	* lib/gdb.exp(gdb_expect): Set remote_suppress_flag if
	suppress_flag has been set.
	(gdb_step_for_stub): Check for gdb,use_breakpoint_for_stub
	target feature.

Mon Sep 15 15:43:17 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.stabs/weird.exp: Don't start gdb 'til after we've compiled
	the testcase.

	* gdb.c++/cplusfuncs.cc(main): Add extern "C" declaration for
 	set_debug_traps() and breakpoint().
	* gdb.c++/misc.cc (main): Ditto.
	* gdb.c++/templates.cc (main): Ditto.
	* gdb.c++/virtfunc.cc (main): Ditto.

Fri Sep 12 16:56:38 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_step_for_stub): New function.
	(gdb_run_cmd): Look for gdb,do_reload_on_run target feature--if it
	exists, reload the executable and do a "continue" instead of
	doing a jump.
	(runto_main): Use gdb_step_for_stub.
	
	* gdb.base/break.exp: Use gdb_step_for_stub. Also, rename certain
 	tests to have unique names.
	* gdb.base/callfuncs.exp: Ditto.
	* gdb.base/commands.exp: Ditto.
	* gdb.base/default.exp: Ditto.
	* gdb.base/help.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/opaque.exp: Ditto.
	* gdb.base/printcmds.exp: Ditto. Use a loop to emit multiple
	similar tests.
	
	* gdb.base/setshow.c: Add set_debug_traps/breakpoint calls.
	* gdb.c++/cplusfuncs.cc: Ditto.
	* gdb.c++/virtfunc.cc: Ditto.

	* config/monitor.exp: Keep track of the last file we saw, rather
	than trying to get the info from gdb.

	* gdb.fortran/types.exp: Move comment to previous line.

Tue Sep  2 19:55:34 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/sparclet.exp: Detect gratuitous change to sparclet gdb
 	target mode.

Mon Jul 28 12:14:47 1997  Stan Shebs  <shebs@andros.cygnus.com>

	From Bob Manson:
	* config/monitor.exp (gdb_target_monitor): Look for "Connected to"
 	string from GDB when it connects.

	* lib/gdb.exp: Look for $TOOL_EXECUTABLE.

Thu Jul  3 15:35:12 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(get_debug_format): Don't cause the testsuite to fail
 	if we can't get a debug format from GDB (we may be testing an
 	older GDB). Use a 10 second timeout when checking for the format.

	* gdb.stabs/weird.exp: Fix quoting.

	* config/sparclet.exp: Renamed sparclet-loader.c to stub-loader.c.

Mon Jun 30 18:31:43 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/arm-ice.exp: New file.

Sun Jun 29 16:43:30 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/overlays.exp: Preliminary fixes; temporarily disabled
 	until it has been modified to work with the new testsuite.

	* gdb.*/*.exp: Instead of causing 1 unresolved test when the
 	testcase won't compile, cause all of the testcases in the file to
 	fail instead.

	* lib/gdb.exp(gdb_suppress_entire_file): New procedure.
	(gdb_clear_suppressed): New procedure.
	(gdb_stop_suppressing_tests): Only clear suppress_flag if
	it contains a positive value.

Sat Jun 28 13:31:11 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(default_gdb_start): Use gdb_opts host feature.

	* gdb.c++/virtfunc.exp: Remove setting of libs variable.

Fri Jun 27 07:44:25 1997  Fred Fish  <fnf@cygnus.com>

	* lib/gdb.exp (setup_xfail_format): New function.
	(get_debug_format): New function to get debug format.
	(debug_format): New global variable to hold last value set
	by get_debug_format.
	* gdb.base/list.exp: Call get_debug_format and expect some
 	tests to fail for DWARF 1 and COFF formats.
	* gdb.c++/ptype.exp: Ditto.
	* gdb.c++/classes.exp: Ditto.
	* gdb.c++/cplusfuncs.exp: Ditto.
	* gdb.c++/inherit.exp: Ditto.
	* gdb.c++/templates.exp: Ditto.
	* gdb.c++/virtfunc.exp: Ditto.
	
Wed Jun 25 09:08:51 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(default_gdb_exit): Don't give an error if the remote
	host doesn't have a currently-open connection.

	* config/sparclet.exp: Cleanups and fixes to make it generic for
 	any gdb stub target. Handle cases where gdb doesn't respond when
 	interrupted in a sane fashion.

	* config/m32r-stub.exp: Load sparclet.exp instead of trying to do the
 	same thing in a totally different way.

	* config/monitor.exp: Pass in timeouts to gdb_expect instead of
 	setting "timeout".
	(gdb_start): We set the global gdb_prompt variable in
 	default_gdb_init now.

Sun Jun 22 09:11:02 1997  Fred Fish  <fnf@cygnus.com>

	* gdb.base/printcmds.exp: Fix "check for floating addition"
	regexp to accept results within approx +/- .01 of exact value.
	* lib/gdb.exp (gdb_test): Remove unused expect_out global decl.

Wed Jun 18 11:11:39 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_init): Pass our arguments to default_gdb_init
 	properly.
	(gdb_expect): Add optional timeout parameter, and add timeout
	value to various calls.
	(gdb_suppress_tests): Only give one warning message per group.

Tue Jun 17 13:10:10 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_expect): Declare errorInfo and errorCode as
 	global variables. Handle getting a value for $timeout more
 	gracefully.

Sat Jun 14 09:23:26 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp: Close connection to remote host if gdb doesn't
 	initialize.
	(default_gdb_init): New procedure; allow gdb_init to be overridden
 	by a target configuration file.
	(gdb_expect): Pass the timeout to remote_expect.

	* config/monitor.exp(gdb_load): Fix typo in regexp.

Thu Jun 12 20:57:12 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/funcargs.exp: Remove spurious suppress tests call.

Tue Jun  3 15:20:20 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd
 	here. Call gdb_target_exec before rebooting the target, to make
 	sure the connection to the target is closed.
	(gdb_load): Pass the name of the executable to gdb_target_monitor.
	Don't call gdb_file_cmd here; let gdb_target_monitor do it.
	Also detect "Timeout reading from remote" error.

	* config/gdbserver.exp: Pass the executable being loaded to
 	gdb_target_monitor. Don't call gdb_file_cmd here; let
 	gdb_target_monitor do it.

	* gdb.disasm/hppa.exp: Don't use exec_output.

Fri May 23 13:28:29 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/list.exp: If we're debugging a non-native target,
	try to set the pc register to point to the start of the
	program before doing the first list command.

	* gdb.c++/virtfunc.exp(gdb_virtfunc_restart): Make sure we run
 	test_calls after restarting.

	* lib/gdb.exp(gdb_run_cmd): Send jump command again after
 	reloading.

	* gdb.base/watchpoint.exp: Fix typo.

	* gdb.base/setshow.exp: Check for use_gdb_stub.

	* gdb.base/break.exp: Fix continue until exit test for the gdb
 	stub case.
	* gdb.base/langs.exp: Ditto.

	* config/monitor.exp(gdb_load): Handle gdb_sect_offset and
 	gdb_load_offset. If we weren't given a file to load, figure out
 	what the current file is and use it.

	* config/i386-bozo.exp: New file.

Thu May 22 18:51:32 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_expect): Look for gdb,timeout target
	feature.

	* config/proelf.exp: New entry.

Wed May 21 21:23:16 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp: Remove spurious .* patterns at the beginning
	of regexps.

	* gdb.base/watchpoint.exp: Don't run the test_stepping
	tests if gdb can't call functions on the target.

	* gdb.base/setshow.exp: Don't run the set prompt tests if
	the board has gdb_prompt set.

Tue May 20 08:58:49 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/a2-run.exp: Change "gdb,noargs" to just "noargs".
	* gdb.base/commands.exp: Likewise.
	* gdb.base/setshow.exp: Likewise.

Mon May 19 15:37:50 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/monitor.exp(gdb_start): Look for gdb_prompt target
	feature.

	* config/i960.exp: New file.

Thu May  1 18:01:50 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/funcargs.exp: Check for gdb,short_int target
	feature instead of looking for explicit target triplets.

Mon Apr 28 17:27:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/printcmds.exp: add a couple more tests a la 
	"p 123DEADBEEF", to check parse_number.
	* top.c: change "to enable to enable" to "to enable" in a couple
	of help strings.

Thu Apr 24 14:38:18 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/callfuncs.exp: Mark some tests as expected to fail
	on the mn10300.
 
Mon Apr 21 15:05:42 1997  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a2-run.exp: Add arm-*-coff setup_xfails for cases
	where the test executable is run with explicit args.
	* gdb.base/default.exp: Handle arm-*-coff case for "info float".

Mon Apr 21 13:38:58 1997  Fred Fish  <fnf@cygnus.com>

	* gdb.base/run.c: Use FAKEARGV to build test executable that
	does not require a command line arg, since most simulators
	don't currently support passing such an arg into the simulated
	program.
	* gdb.base/commands.exp: Change tests to insert the proper
	value as the arg to the first recursive factorial call.  Change
	compilation line to define FAKEARGV at compile time.

Wed Apr  9 11:12:36 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/recurse.exp: Enable these tests for the mn10300.
	* gdb.base/watchpoint.exp: Don't expect a failure for an "calling
	function with watchpoint enabled" test.

Tue Apr  8 19:33:20 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/watchpoint.exp(test_watchpoint_triggered_in_syscall):
 	Don't call gdb_test when the command doesn't return to a gdb prompt.

	* lib/gdb.exp(gdb_stop_suppressing_tests): Don't print gratuitous
 	"Tests restarted" messages.

Tue Apr  8 16:38:46 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/mn10300.exp: Fix buglets in "other" tests.

Thu Apr  3 15:21:26 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/help.exp: update help msg for INFO ADDR; add help test
	for INFO SYMBOL; add help tests for OVERLAY commands.
	* gdb.base/default.exp: add tests for INFO SYMBOL command;
	add tests for OVERLAY commands
	* gdb.base/overlays.c overlays.exp foo.c bar.c baz.c grbx.c ovlymgr.h
	d10v.ld m32r.ld d10vovly.c m32rovly.c: add test case for overlays.
	* gdb.base/sigall.c: add usestubs code frag
	* gdb.base/watchpoint.exp: turn on complex watchpoint test for M32R.
	
Thu Apr  3 09:38:53 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_suppress_tests): Add explanation for subsequent
	failures.
	(gdb_stop_suppressing_tests): Note that tests have restarted.

Wed Apr  2 19:04:20 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/h8300.exp: New file.

Sun Mar 30 13:38:25 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/setshow.exp: Check for the existence of a
	feature, not its value.

Sat Mar 29 11:19:46 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.c++/virtfunc.exp: Restart gdb in a sane fashion.

	* gdb.base/scope.exp: It's now init0(), not init().

	* gdb.base/scope0.c: For now, change init() to be init0().

	* config/monitor.exp: Use gdb_serial in preference to serial
	or netport.

	* lib/gdb.exp: Set GDB to [transform gdb] if we're using a remote host
 	and it's not already set.

Fri Mar 28 19:54:18 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/setshow.exp: Only test the run command if the target
 	isn't using a stub and if it supports argument passing.

Sat Mar 22 19:50:25 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/udi.exp(gdb_start): Make sure UDICONF is set
	properly before starting gdb.

Mon Mar 24 14:40:33 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/mn10300.s: New test file for mn10300 disassembler.
	* gdb.disasm/mn10300.exp: Run mn10300 disassembler tests.
	* gdb.disasm/Makefile.in: Remove "mn10300" when cleaning.

Tue Mar 11 11:42:58 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/vx.exp: Use remote_ld, not vxworks_ld. Don't use
 	specialized code to reboot the board, use remote_reboot instead.

	* config/vxworks29k.exp: Use vx.exp, not vx-gdb.exp.

	* lib/gdb.exp: Add GDB_TESTCASE_OPTIONS.

	* config/monitor.exp: Make sure we disconnect from the target.
	Also, try a reboot/reload cycle instead of failing if the
	load fails.

Fri Mar  7 13:48:30 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/default.exp: Don't set match_max.
	* gdb.base/help.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/signals.exp: Ditto.

	* config/monitor.exp(gdb_load): If gdb,use_standard_load is
	set, use remote_ld to download the testcase instead of
	the GDB loader.

Wed Mar  5 00:00:43 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/vr5000.exp: New file.

	* config/monitor.exp(gdb_target_monitor): Add pattern for
	"Ending remote" to detect errors in connecting.

	* gdb.base/setshow.exp: Add .* within auto language test.

	* lib/gdb.exp(gdb_run_cmd): Add check for gdb_init_command
	target feature.

	* config/monitor.exp(gdb_load): Check for a failure when loading,
 	and reboot the board if necessary.

	* gdb.base/setvar.exp(test_set): Handle multiple prints within
	a set of tests. Remove print.* from the patterns being checked.

Mon Mar  3 11:57:43 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/a1-selftest.exp: Use send_gdb consistently. Don't
	refer to gdb_spawn_id.

	* config/m32r-stub.exp: Remove references to gdb_spawn_id, no
	longer used.
	* config/sparclet.exp: Ditto.
	* config/sparclet-old.exp: Ditto.
	* config/slite.exp: Ditto.
	* config/sim.exp: Ditto.
	* gdb.base/funcargs.exp: Ditto.

	* lib/gdb.exp:Remove references to gdb_spawn_id.
	(gdb_expect): Move to remote.exp.

Fri Feb 28 20:47:39 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/monitor.exp: Detect the "Couldn't establish connection"
	message from GDB.

Tue Feb 25 14:08:55 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/bitfields.exp: Use runto instead of explicit
	gdb_run_cmd/gdb_expect sequences.

	* gdb.base/break.exp(text_next_with_recursion): Add match for
	gdb_expect call.

	* config/monitor.exp(gdb_target_monitor): Calling exit loses big.
	We also need to handle the "A program is being debugged already"
	prompt from gdb. Use gdb_test to set the baud rate.

	* lib/gdb.exp(gdb_init): Increase the default expect buffer size
	to 20000. Really. I mean it.

Mon Feb 24 13:23:26 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_test): Generate a FAIL message when send_gdb
 	fails. If suppress_flag is set, skip perror message about not
 	being able to send to GDB.
	(send_gdb): If suppress_flag is set, don't try to send commands to
 	GDB.
	(gdb_expect): If suppress_flag is set, always fail immediately.
	(gdb_suppress_tests, gdb_stop_suppressing_tests): New functions.
	(gdb_init): Call gdb_stop_suppressing_tests.
	(default_gdb_exit): Ditto.
	(default_gdb_start): Ditto.

	* gdb.base/bitfields.exp: Call gdb_suppress_tests and
 	gdb_stop_suppressing_tests as appropriate.
	* gdb.base/break.exp: Ditto.
 	* gdb.base/callfuncs.exp: Ditto.
	* gdb.base/commands.exp: Ditto.
	* gdb.base/exprs.exp: Ditto.
 	* gdb.base/funcargs.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/recurse.exp: Ditto.
 	* gdb.base/scope.exp:  Ditto.
	* gdb.base/structs.exp: Ditto.
	* gdb.c++/inherit.exp: Ditto.

Sun Feb 23 19:56:02 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/vr4300.exp: New file.

	* gdb.*/*.exp: Call gdb_expect instead of expect.
	
	* lib/gdb.exp(gdb_expect): New function.

Thu Feb 20 13:57:01 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_init): New function.

	* gdb.base/setvar.exp(test_set): Don't bother printing a PASS/FAIL
 	for each individual variable set.

	* gdb.base/exprs.exp(test_expr): Make sure each test gets a unique
	name.

	* gdb.base/help.exp: Fix the syntax of a few gdb_test calls.

	* gdb.base/scope.exp: Use gdb_test.

	* gdb.base/ptype.exp: Don't call "gdb_exit; gdb_start" if we're
	aborting; the testsuite driver will do that for us (see
	gdb_finish). Also, use gdb_test in a few more places.

Thu Feb 20 13:32:24 1997  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/help.exp: Fix syntax of "help info all-registers" test.

Thu Feb 20 10:34:21 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/mn10200.s: Add "nop" after "main" so that "main"
	and "add_tests" are not at the same address.

Fri Feb 14 18:47:23 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/ptype.exp: Use gdb_test.

Thu Feb 13 16:09:36 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/mn10200.s (misc_tests): Fix targets for "jsr" insns.
	* gdb.disasm/mn10200.exp (misc_tests): Remove bogus line accidentally
	left in.  No longer expect them to fail.

	* gdb.stabs/*.mt; Deleted, no longer used.
	* gdb.stabs/configure.in: Remove references to target makefile
	frags.
	* gdb.stabs/configure: Rebuilt.

	* gdb.disasm/*.mt: Deleted, no longer used.
	* gdb.disasm/configure.in: Remove references to target makefile
	frags.  Use "sh3.s" as the unique filename for this directory.
	* gdb.disasm/configure: Rebuilt.

	* gdb.disasm/mn10200.s: New test file for mn10200 disassembler.
	* gdb.disasm/mn10200.exp: Run mn10200 disassembler tests.
	* gdb.disasm/Makefile.in: Remove "mn10200" when cleaning.

Tue Feb 11 16:57:58 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/udi.exp: Use mondfe,name instead of remote_host.

Tue Feb 11 11:22:36 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/watchpoint.exp: Don't expect a failure when calling
	a function with a watchpoint enabled on the mn10200.

	* gdb.stabs/weird.exp: Don't quit if "weird.s" doesn't exist
	before trying to create it!

Mon Feb 10 16:40:47 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/vx.exp: Use hostname instead of netport.

	* config/vxworks.exp: New file.

	* gdb.base/a2-run.exp: Change vxworks cases to use gdb_spawn_id.

	* config/monitor.exp(gdb_target_monitor): Look for a prompt from
 	gdb before assuming everything worked. Send a ^C if a timeout
	occurs.

	* lib/gdb.exp(gdb_test): Check the result of send_gdb. Use
	$gdb_spawn_id directly.
	(gdb_run_cmd): Try _start as well as start. Use the target feature
	gdb,start_symbol as the symbol to start from when jumping.

Mon Feb 10 11:26:59 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/exprs.exp: Delete bogus/incorrect (and probably
	redundant) test.

	* gdb.base/recurse.exp: Relax final value test for 'b' so that
	it doesn't lose for 16bit integer systems.

Fri Feb  7 09:31:21 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.fortran/types.exp: If the target doesn't support "double"
	data types, then expect "real" types to only be 4 bytes.

	* gdb.c++/virtfunc.exp: Expect failure for virtual function
	call tests if the target doesn't support inferior function calls.

	* gdb.base/printcmds.exp: Allow minor deviation in FP values
	in printf tests.

Thu Feb  6 12:46:14 1997  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/help.exp: Disable "help set", "help show", and
	"help support".  Simplify regexp for "help stack".

	* gdb.base/default.exp: Set match_max to 5000 and the timeout
	to 60 seconds.  Temporarily set match_max to 15000 around the
	"info copying" test.

	* gdb.base/nodebug.exp: Don't try to do an inferior function
	call if the target doesn't support them.
	* gdb.base/printcmds.exp: Likewise.
	* gdb.base/setvar.exp: Likewise.
	* gdb.base/structs.exp: Likewise.
	* gdb.c++/templates.exp: Likewise.
	* gdb.base/ptype.exp: Likewise.  Remove UDI specific stuff.

	* gdb.base/recurse.exp: Enable for the mn10200.

	* configure.in: Do configure gdb.stabs directory for *-*-elf
	targets.
	* configure: Rebuilt.

	* gdb.base/break.exp: Check for gdb,noresults before testing
	exit status and/or results from the target.
	* gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise.
	* lib/gdb.exp: Remove old (now bogus) initialization of
	noinferior, noargs, noresults and nosignals.

Tue Feb  4 21:52:17 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/sh.exp: New file.

	* config/slite.exp: Try to connect multiple times to the board
	before rebooting. Only send a "monitor run" if need_monitor_run
	is set.

	* gdb.base/break.exp: Don't do the "stub continue" test if
	the target has gdb_stub set.

	* gdb.base/callfuncs.exp: Increase the timeout.

	* gdb.base/interrupt.exp: Don't even try to compile the testcase
	if the target has gdb,noinferiorio set.

	* gdb.base/list.exp: Increase match_max to 10000 characters.

	* gdb.base/sigall.exp: Check for gdb,nosignals on the target.

	* gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the
	target.

	* lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs.

Mon Feb  3 12:09:37 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/a1-selftest.exp: Make sure we call gdb_exit before
 	trying to delete the copy of gdb. Catch the file delete so we
 	don't die if the delete fails; also, the file should be copied to
 	the host, not to the build.

Sun Feb  2 00:55:14 1997  Bob Manson  <manson@charmed.cygnus.com>

	* lib/gdb.exp(gdb_test): Surround the result pattern with
 	parenthesis in case it contains multiple regexps separated
	with |.

	* gdb.base/watchpoint.exp: Use gdb_test.
	* gdb.base/default.exp: Ditto.

Sat Feb  1 23:51:01 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.*/*.exp: Replace $prompt with $gdb_prompt.
	
	* gdb.base/scope.exp: Use gdb_test.
	* gdb.c++/classes.exp: Ditto.
	* gdb.c++/inherit.exp: Ditto.

Fri Jan 31 13:09:12 1997  Bob Manson  <manson@charmed.cygnus.com>

	* gdb.base/crossload.exp: Don't use execute_anywhere, use
	remote_exec instead.
	* gdb.base/corefile.exp: Don't be ridiculous.
	* gdb.base/*.c: Add missing stub invocations.

Thu Jan 30 16:49:25 1997  Bob Manson  <manson@charmed.cygnus.com>

	* config/slite.exp: Miscellaneous fixes.

	* lib/gdb.exp: Fix runto.

	* gdb.base/signals.exp: Check for a gdb,nosignals feature of
	the target.

	* gdb.base/watchpoint.exp: Fix regexp.

	* lib/gdb.exp(default_gdb_exit): Add a catch to the
	close and wait commands, as the descriptor may now be
	invalid. Always call "remote_close host".

Tue Jan 28 14:42:31 1997  Bob Manson  <manson@charmed.cygnus.com>

	   Major rewrite for testsuite revision.
	
	* lib/gdb.exp: Remove references to global CC, CXX, B_OPTIONS,
	TARGET_INCLUDES, LDFLAGS and target_alias. Use gdb_spawn_id
	instead of relying on spawn_id to always contain a valid
	spawn id.
	(get_compiler_info): New procedure to build the ${binfile}.ci
	file, instead of replicating this in N different places.
	(gdb_compile): New procedure.
	
	gdb.*/*.exp: Use gdb_compile and get_compiler_info (with
 	appropriate arguments) instead of compile. Use gdb_test in a lot
 	more places.  Use send_gdb instead of send. Always run gdb_start
	at the start of a testcase, as this is no longer done magically.

	config/*-gdb.exp: Rename without the -gdb suffix.

	config/mips.exp: Use remote_close instead of exit_remote_shell.
	config/monitor.exp: Use target_info instead of looking at
	baud, timeout, etc.
	config/sim.exp: Use gdb_spawn_id instead of relying on spawn_id.

Sat Dec 14 00:43:57 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.c++/templates.exp (test_ptype_of_templates),
	gdb.c++/inherit.exp (test_ptype_si, test_print_anon_union):
	Update expect patterns for destructors and assignment operators
	to match corresponding c-typeprint.c changes.
	* gdb.c++/templates.exp (test_template_breakpoints):  Revert change
	to destructor breakpoint test, GDB should be able to set the
	destructor breakpoint without specifying arguments.

Tue Dec  3 20:17:52 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.threads/pthreads.exp: Change result for failure to compile due
	to lack of pthreads runtime support from an error to simply an
	unsupported test, per dejagnu standards.

Sun Dec  1 00:18:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* lib/gdb.exp (gdb_test):  Simplify expect pattern for the case
	where GDB exits to reduce pattern match time.
	(skip_chill_tests):  Skip chill tests for mips*-sgi-irix6*.

	* gdb.base/nodebug.exp:  Add mips*-sgi-irix6* xfails.

Tue Nov 26 18:29:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/callfuncs.exp: Turn on function call tests for h8300.
	* gdb.base/default.exp:   ditto.
	* gdb.base/nodebug.exp:   ditto.
	* gdb.base/printcmds.exp: ditto.
	* gdb.base/ptype.exp:     ditto.
	* gdb.base/setvar.exp:    ditto.
	* gdb.base/structs.exp:   ditto.
	* gdb.base/setshow.c:     Guard against uninitialized values of argc.

Tue Nov 26 17:23:28 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure, */configure: Rebuild with autoconf 2.12.

Sat Nov 23 13:32:15 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a1-selftest.exp: Change x86 linux setup_xfails to
	use new i*86-pc-linux*-gnu quads.
	* gdb.base/corefile.exp: Ditto.
	* gdb.base/signals.exp: Ditto.
	* gdb.base/sigall.exp: Ditto.
	* gdb.base/interrupt.exp: Ditto.

	* gdb.base/signals.exp (signal_tests_1): Remove setup_xfail
	"i*86-*-linux" for "signal SIGUSR1".  Now works, at least with
	RedHat 4.0.
	
	* gdb.threads/pthreads.c (_MIT_POSIX_THREADS): Define if target is
 	linux.  This allows the test case to at least compile on latest
 	linux, but still not run due to missing the threads runtime library.

Fri Nov 22 10:13:29 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/a1-selftest.exp (do_steps_and_nexts):  Reinitialize source
	directory to search gdb directory. Accept and step over conditional
	stack alignment code. Consume $prompt in failure cases.
	Reset timeout to $oldtimeout instead of some arbitrary value.
	* gdb.base/nodebug.exp:  Limit backtrace to 10 frames to avoid
	timeout problems with infinite stack backtraces.
	* gdb.base/ptype.exp (ptype struct link, union tu_link):
	Accept function parameters for linkfunc member.

Thu Nov 21 09:17:19 1996  Fred Fish  <fnf@cygnus.com>

	* lib/gdb.exp (CFLAGS): Remove, unreferenced.
	(CXXFLAGS): Remove, unreferenced.
	(B_OPTIONS): Add for -B options and add code to initialize with
 	previous -B options and also add -B option to pick up cross compiled
 	runtime.
	(TARGET_INCLUDES): Add for -I options and add code to initialize when
	doing cross compiles.
	(target_alias): Declare global.
	(xgcc): Set variable to full path of gcc in build tree.  Use findfile
	to verify that gcc exists in build tree, and if so set CC to that
	gcc and to use B_OPTIONS and TARGET_INCLUDES.
	
Tue Nov 12 16:20:13 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/inherit.exp (test_print_anon_union): Reenable
	ptype test for anonymous union.  Fixup testcase to match
	current gcc debug output.

Mon Nov 11 14:12:06 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/funcargs.c: Use cast rather than "UL" suffix to
	force argument to an unsigned long type.

Mon Nov 11 10:27:55 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/inherit.exp (test_ptype_si): Fix tagless struct ptype
 	tests and anonymous union print/ptype tests.
	* gdb.base/list.exp (test_forward-search): Increase timeout by
	5 minutes for the "search extremely long line" case.
	* lib/gdb.exp (gdb_test): Document that the third arg to gdb_test is
	completely optional and that the pass/fail messages use the command as
	the message if that third arg is a null string.
	(gdb_test_exact):  Arrange that a null string pattern means match a
	null string output rather than any output, which might include random
 	errors.
	* gdb.base/mips_pro.exp: Add "mips*-sgi-irix4*" xfail for
	backtrace test.
	* gdb.c++/demangle.exp: Add a "*-*-*" xfail for test that was
	always failing and failure is now exposed by gdb.exp changes.

Sat Nov  9 11:13:24 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/inherit.exp (test_ptype_vi): Log some passes that
	weren't being noted.

Sat Nov  9 01:05:10 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/corefile.exp:  Consume $prompt in mmap fail cases.
	* gdb.stabs/weird.exp:  Remove v_comb xfails.

Tue Nov  5 10:44:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/[bitfields.exp crossload.exp funcargs.exp interrupt.exp
	            list.exp scope.exp watchpoint.exp]
	  Make all timeout error msgs explicitly say "(timeout)".
	
Mon Nov  4 12:03:06 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* config/monitor.exp: Increase download timeout to 1000 seconds.

Mon Nov  4 12:02:26 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* config/m32r.exp: Increase timeout to 120 seconds.

Sun Nov  3 14:37:05 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/classes.exp: Modify to handle current gcc C++ member ordering
	and accept older ordering as obsolescent gcc or gdb.
	* gdb.c++/templates.exp: Ditto.
	* gdb.c++/virtfunc.exp: Ditto.

Fri Nov  1 11:56:09 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/coremaker.c: Add code to mmap some data so we
	can check that it ends up in the core file.
	* gdb.base/corefile.exp: Add test to read mmapped data
	from core file.

Wed Oct 30 18:19:16 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* config/m32r.exp: New file.

Mon Oct 21 14:40:50 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* testsuite/gdb.base/nodebug.exp:  Whack out -g options by hand so
	that cflags can contains -gstabs, and work correctly for other tests.

Mon Oct 21 14:00:37 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

	* gdb.base/setshow.exp: New file, tests show and set.
	* gdb.base/setshow.c:   New file, tests show and set.
	* gdb.base/help.exp: Add test for help set|show annotate.
	* gdb.base/default.exp: Add test for set|show annotate.

Wed Oct 16 19:03:54 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* testsuite/gdb.base/break.exp:  Make backtrace from factorial
	errors unique.
	* testsuite/gdb.base/nodebug.exp:  Whack out all -g options
	explicitly.

Tue Oct 15 16:45:02 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* config/sim-gdb.exp (gdb_target_sim):  Remove setting of height
	and width commands.  This is done elsewhere.
	* (gdb_start):  Don't call gdb_start_sim here.  That's already
	done in gdb_load.  This fixes lots of failures in default.exp.

Sun Oct 13 10:40:23 1996  Fred Fish  <fnf@cygnus.com>

	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>:
	* gdb.base/mips_pro.exp: Fix misplaced gdb_exit/gdb_start/gdb_load.
	* lib/gdb.exp (gdb_test): Treat failures due to program exiting
	in the same we we treat other failures (since it may be an expected
 	condition), rather than as an error.
	* gdb.base/signals.exp (test_handle_all_print): Revert back to
	old test format.

Fri Oct 11 17:05:22 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (clean mostlyclean): Also remove chill *.grt files.
	(distclean maintainer-clean realclean): No need to remove files
 	twice.  Nuke the duplicates.
	* gdb.base/Makefile.in (EXECUTABLES): Add "structs".
	* gdb.threads/Makefile.in (distclean maintainer-clean realclean): 
	Remove config.h along with other config files.

Mon Sep 30 20:16:22 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for
	"p func1 ()" and note that rests of tests are skipped.
	* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
 	setup_xfails for "print func2::coremaker_local".
	Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
	* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
	affected by the previous run test.
	* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
	"print array () ubyte (foo)" and "print/x array () byte (\$i)"
	* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
	"pass int powerset tuple" and "pass modeless int powerset tuple".
	* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
	"real write 4" and "real write 8".
	* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
 	setup_xfails for "print vs1 after tuple assign 2",
	"print \$i after tuple assign 2", and
	"print vs2 after tuple assign 2".
	* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
	meaningful error message and return -1 so the caller can
	suppress further tests and avoid a cascade of errors.
	
Fri Sep 27 10:34:51 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a1-selftest.exp: Tweak tests to account for new
	format for printing version.
	* gdb.base/default.exp: Ditto.
	* gdb.base/interrupt.exp: Fix problem with cascade of
	errors if child process dies while calling a function.
	
Fri Sep 13 21:43:48 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (VPATH): Add
	* Makefile.in (Makefile, config.status): Fix rules so things get
	remade when necessary.

Fri Sep 13 18:16:10 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (just-check): Add path to sibling expect dir
	to environment variable specified by RPATH_ENVVAR.

Fri Sep 13 12:05:34 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (RPATH_ENVVAR): New var, set to @RPATH_ENVVAR@.
	(just-check): Add shared library paths for libstdc++, tk,
	tcl, bfd, and opcodes to the environment variable specified
	in RPATH_ENVVAR.
	* configure.in: Add support to recognize --enable-shared flag
	and generate correct value for RPATH_ENVVAR.
	* configure: Regenerated with autoconf.

Mon Sep  2 06:36:02 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/break.exp: Expand "Delete all breakpoints" xfail to
 	include all osf versions.
	* gdb.threads/pthreads.exp: Expand "run to main" xfail to include
	all osf versions.  Add -D_MIT_POSIX_THREADS to compilation command
	when target is linux.  When failing to build pthreads test
	executable, give more meaningful message.
	* gdb.threads/pthreads.c: Hpux also uses old definition of second
	arg for pthread_create.
	
Mon Aug 19 09:58:59 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.threads/pthreads.c (PTHREAD_CREATE_ARG2,
 	PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations.
	* gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris)
 	and -lpthreads (everybody else).
	(test_startup): Fail gracefully if threads are not supported.
	* gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for
	"p/c array_index("abcdef",2)" when not gcc compiled.
	* gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for
	"print func2::coremaker_local" when not gcc compiled.
	* gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for
	"ptype on opaque struct tagname (statically)",
	"ptype on opaque struct tagname (dynamically) 1", and
	"ptype on opaque struct tagname (dynamically) 2"
	for not compiled with gcc.
	* gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for
	backtrace when compiled with gcc.
	* lib/gdb.exp (runto_main): Return result of "runto main" rather 
	than always return success.

Sat Aug 17 13:28:00 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/virtfunc.exp: Remove setup_xfail for "mips-*-irix5*".

Tue Aug 13 10:26:10 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/structs.exp: Undo last change.

Mon Aug 12 15:29:08 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a1-selftest.exp (do_steps_and_nexts): New routine to
	encapsulate all the steps/nexts done during self test, starting
	at main, and makes them less sensitive to optimization issues.
	Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
	signal handler" test.
	* gdb.threads/pthreads.exp: Only run this for native configs.
	* gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
	setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
	tests.
	gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
	for "runto test_calls(void)" test.
	
Sun Aug 11 13:11:24 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/term.exp: Set 7-bit strings, address off, width to 0,
	and don't expect address info in breakpoint confirmations.

Wed Aug  7 20:47:43 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/list.exp (test_forward_search): Increase timeout
	temporarily by 60 seconds for searching extremely long line,
 	and then reset to old value when done.  Increase expect input
	buffer to 10000.

Wed Aug  7 15:34:22 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/list.exp (test_forward_search): Fix to handle very
	long source line without overflowing expect's input buffer.

Wed Aug  7 12:03:25 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* config/slite-gdb.exp (gdb_start): Use "full_buffer", not
	"buffer_full".

	* config/nind-gdb.exp (gdb_start): Use "full_buffer", not
	"buffer_full".

	* config/mips-gdb.exp (gdb_start): Use "full_buffer", not
	"buffer_full".

	* lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
	"buffer_full".

Wed Aug  7 11:05:47 1996  Fred Fish  <fnf@cygnus.com>

	* configure.in (configdirs): Add gdb.threads.
	* configure: Regenerated with autoconf.
	* gdb.threads/{config.in, pthreads.c, pthreads.exp}: New.
	* gdb.threads/{Makefile.in, configure.in}: Complete rewrites.
	* gdb.threads/configure: New, generated with autoconf.
	
Tue Aug  6 10:23:04 1996  Tom Tromey  <tromey@rtl.cygnus.com>

	* lib/gdb.exp (gdb_test_exact): Turn \n in pattern into \r\n.

Mon Aug  5 18:11:53 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/signals.exp (test_handle_all_print): Test separately for
	each signal's status in the output of "handle all print".
	* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
	the \r\n sequence that immediately precedes the gdb prompt.
	* gdb.base/a1-selftest.exp: Save original timeout and restore
	after test.

Sun Aug  4 10:20:50 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/hppa.s: Export fmemLRbug_tests_4 as a ST_CODE
	symbol.

Fri Aug  2 17:37:26 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>

	* config/vx-gdb.exp (gdb_start): Fix syntax of `$shell_id < 0'.

Thu Jun 27 20:41:40 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/signals.exp (test_handle_all_print): Temporarily increase
	timeout by 60 seconds.

Thu Jun 27 18:13:57 1996  Fred Fish  <fnf@cygnus.com>

	* config/unix-gdb.exp: Increase default timeout from 30 to 60 sec.
	* config/netware.exp (gdb_run_cmd): Restore old timeout before doing
	error return.

Thu Jun 27 10:54:58 1996  Fred Fish  <fnf@cygnus.com>

	* lib/gdb.exp (default_gdb_start): When reporting a timeout during
	gdb initialization, also report how long dejagnu waited.  Restore
	old timeout before doing error return.  Temporarily increase timeout
 	by 3 minutes to allow for slow startups over heavy NFS use.

Tue Jun 25 19:59:17 1996  Fred Fish  <fnf@cygnus.com>

	* lib/gdb.exp: Report timeout value for verbosity level 2.
	* config/gdbserver.exp: Ditto.
	* config/hppro.exp: Ditto.
	* config/mips-gdb.exp: Ditto.
	* config/monitor.exp: Ditto.
	* config/netware.exp: Ditto.
	* config/sim-gdb.exp: Ditto.
	* config/slite-gdb.exp: Ditto.
	* config/udi-gdb.exp: Ditto.
	* config/unix-gdb.exp: Ditto.
	* config/vx-gdb.exp: Ditto.
	* gdb.base/a1-selftest.exp: Ditto.
	* gdb.base/a2-run.exp: Ditto.
	* gdb.base/break.exp: Ditto.
	* gdb.base/corefile.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/recurse.exp: Ditto.
	* gdb.base/scope.exp: Ditto.
	* gdb.base/signals.exp: Ditto.

Tue Jun 25 23:16:58 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* gdb.threads/Makefile.in (docdir): Removed.

Tue Jun 25 17:02:39 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* configure.in (AC_PREREQ): autoconf 2.5 or higher.
	* gdb.{base,c++,chill,disasm,stabs}/Makefile.in (VPATH): set to 
	@srcdir@.
	* gdb.{base,c++,chill,disasm,stabs}/configure.in (AC_PREREQ): 
	autoconf 2.5 or higher.
	* gdb.{base,c++,chill,disasm,stabs}/configure: Rebuilt.

Thu Jun 13 11:16:10 1996  Tom Tromey  <tromey@thepub.cygnus.com>

	* configure: Regenerated.
	* aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
	avoid name clashes with SunOS headers.

Wed Jun  5 16:43:27 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.c++/virtfunc.exp: Search $objdir/../../libstdc++ for libstdc++.

Thu May 30 11:35:11 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/callfuncs.exp: Finish last change -- make sure the
	prototype information ends up in the compiler info file.

Thu May 23 12:48:41 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp: Remove the compiler info file prior to
	attempting to regenerate it.  Eliminate use of a temporary file
	and just generate the info file directly.  Source it immediately,
	for consistency of use.
	* gdb.base/corefile.exp: Ditto
	* gdb.base/exprs.exp: Ditto.
	* gdb.base/funcargs.exp: Ditto.
	* gdb.base/langs.exp: Ditto.
	* gdb.base/list.exp: Ditto.
	* gdb.base/mips_pro.exp: Ditto.
	* gdb.base/nodebug.exp: Ditto.
	* gdb.base/opaque.exp: Ditto.
	* gdb.base/ptype.exp: Ditto.
	* gdb.base/scope.exp: Ditto.
	* gdb.base/setvar.exp: Ditto.
	* gdb.base/signals.exp: Ditto.
	* gdb.base/whatis.exp: Ditto.
	* gdb.c++/templates.exp: Ditto.
	* gdb.c++/virtfunc.exp: Ditto.
	* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
 	whether or not to add -lstdc++ to the compile command line args.

Sat May 18 02:43:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/recurse.exp:  Remove setup_xfail for "sparc*-*-sunos4*",
	it got fixed by the recent lookup_minimal_symbol_by_pc change.
	Increase timeout, a lot of single stepping might be needed if the
	target has no hardware watchpoints.

Wed May 15 08:47:42 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/break.exp: Ignore compiler warnings when compiling
	break.c.
	* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
	* gdb.base/default.exp: Add h8300 xfails.  Handle messages
	from remote-sim.
	* gdb.base/exprs.exp: Add h8300 xfails.
	* gdb.base/funcargs.exp: Likewise.
	* gdb.base/nodebug.exp: Likewise.
	* gdb.base/printcmds.exp: Likewise.
	* gdb.base/ptype.exp: Likewise.
	* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300.  Add
	h8300 xfails.
	* gdb.base/return.exp: Handle float/double precision problems 
	on the h8300.
	* gdb.base/funcargs.c: Explicitly make last constant argument to
	call_after_alloca_subr an unsigned long type.
	* gdb.base/return.c: Include stdio.h.

Tue May  7 22:01:12 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

	* config/abug.exp: New file for the older Motorola Bug monitor
	that runs on the mvme13x series VME boards.
	* config/monitor.exp: Use the new config array for target settings
	if they exist.

Fri May  3 16:02:55 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* sim-gdb.exp: Make the SH simulator allocate less space when
	it is targeted.

Thu May  2 12:31:56 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/mips_pro.exp: Expect failure for hppa*-*-* in backtrace
	test.

Wed Mar 20 08:48:03 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/list.exp (test_list_function): Remove setup_xfail for
	"rs6000-*-*" for "list function in include file" when gcc compiled.
	* gdb.base/printcmds.exp: Remove setup_xfail for "rs6000-*-aix*"
	for "p ctable1[120]".
	* gdb.base/scope.exp: Remove setup_xfail for "rs6000-*-*" for
	"print 'scope0.c'::filelocal_bss before run" when gcc compiled.
	Remove setup_xfail for "rs6000-*-*" for
	"print 'scope0.c'::filelocal before run".
	* gdb.base/{langs.exp, lists.exp, opaque.exp, scope.exp},
	gdb.stabs/weird.exp: Remove use of compiler options "-c -o ..."
	since some compilers don't allow both options to be given
	on the same command line.  Create object file and move it.
	
Tue Mar 19 23:49:31 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/corefile.exp: Always regenerate the core file, since
	we always regenerate the coremaker program.  Detect special case
	where registers cannot be read from core file.
	
Tue Mar 19 16:52:49 1996  Fred Fish  <fnf@cygnus.com>

	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
	* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
	* gdb.c++/templates.exp: Only match on basename of file since
	some formats like xcoff don't encode directory information.
	* gdb.stabs/weird.exp: Use the right sed script for powerpc
	and rs6000 AIX xcoff targets.
	* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
	* configure: Regenerate.
	* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
	here, rather than in distclean.
	
Sun Mar 17 13:35:31 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/mips_pro.exp: Create mips_pro.ci to get gcc_compiled
	defined, and use it to compile the test case with -O2.  The
	native compilation still uses no optimization.
	* gdb.base/mips_pro.c: Remove inline assembly code since
	it is compiled PIC by default, which results in assembler
	warnings that make the testsuite think the compilation
	was unsuccessful.

Sat Mar 16 15:02:24 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/misc.exp: Add note to message for
	"print s.a for foo struct" that this is a known gcc 2.7.2
	and earlier bug.

Fri Mar 15 17:49:57 1996  Fred Fish  (fnf@cygnus.com)

	* gdb.base/break.exp: Fix pattern for matching "Delete all
	breakpoints (y or n) ".  Add "mips-dec-ultrix*" to
	setup_xfail for deleting all breakpoints test.  Fix various
	timeout messages to include "(timeout)".
	* gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
	for "p t_float_values2(3.14159,float_val2)".
	* gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
	for "continue to call2g" when gcc compiled.
	* gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
	"up to foo in langs.exp", "show language at foo in langs.exp",
	"show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
	and "show language at fsub in langs.exp".
	* gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
	"list line 1 in include file", "list message for lines past EOF",
	"list function in include file", "list list0.h:foo", and
	"list filename:function; nonexistant function".
	* gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
	"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
	and "ptype t_char_array" to be for native cc only.
	
Fri Mar 15 16:17:22 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/corefile.exp: Remove "alpha-dec-osf2*" native compiled 
	setup_xfail for "print coremaker_bss", "print coremaker_ro",
 	"print func2::coremaker_local", and "backtrace in corefile.exp".

Wed Mar 13 14:54:11 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/signals.exp: Remove "alpha-*-osf2*" setup_xfail for
	"bt in signals.exp".  This problem only appears when running
	the testsuite, and then only intermittently.

Tue Mar 12 15:00:16 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/return.exp (return_tests): Differentiate between
	two tests of continuing.

Tue Mar  5 14:33:33 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* */Makefile.in (maintainer-clean): Remove config.log.
	* gdb.base/Makefile.in (EXECUTABLES): Replace twice with twice-tmp.
	* gdb.c++/Makefile.in (PROGS): Add inherit.
	(clean): Remove *.ci.

Tue Feb 20 16:36:10 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/misc.cc: Add test code from Mike Stump.
	* gdb.c++/misc.exp: Add test to print s.a, for Mike Stump.

Sun Feb 18 11:39:12 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/signals.exp: Change setup_xfail for "alpha-*-osf2"
	to "alpha-*-osf2*" and add comment.
	* gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*"
 	setup_xfail for "step over execarg initialization" and
 	"step over corearg initialization".
	* gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail
	for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*".
	* gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not
 	gcc compiled for "print coremaker_bss", "print coremaker_ro",
	"print func2::coremaker_local", and "backtrace in corefile.exp".
	* gdb.base/signals.exp: Build and source signals.ci.
	Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp"
	to be for gcc only.
	* lib/gdb.exp: Move verbose statements outside conditionals.
	
Sat Feb 17 02:22:14 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/sigall.exp:  Remove setup_xfail for irix4.  Fixed by
	Feb 3 procfs.c change.

Fri Feb 16 13:25:31 1996  Fred Fish  <fnf@cygnus.com>

	* config/unix-gdb.exp: Remove extraneous newlines from end of file.

Thu Feb 15 08:12:55 1996  Fred Fish  <fnf@cygnus.com>

	* config/unix-gdb.exp: Default timeout in UNIX case to 30 seconds, up
	from dejagnu's apparent default of 10 seconds, which gives random
	results when running the tests over NFS on moderately loaded systems.
	* lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case.

Mon Feb 12 16:50:28 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp: Remove setup_xfail for PR 5318.  Now fixed.
	* gdb.base/a2-run.exp: Replace $binfile with $testfile in test
 	result reports.

Fri Feb  9 15:56:51 1996  Fred Fish  <fnf@cygnus.com>

	* configure.in (CY_AC_PATH_TCLH): Remove.
	* configure: Regenerate.

Fri Feb  9 08:21:31 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/Makefile.in (clean): Add missing '{'.

Fri Feb  2 10:19:40 1996  Jeffrey A Law  (law@cygnus.com)

	* lib/gdb.exp: Provide a default value for noinferior.

	* lib/gdb.exp: Fix typos (LDLAGS -> LDFLAGS).
	Load libgloss.exp.

Thu Feb  1 20:20:14 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/hppa.exp: Compile directly into an executable, use
	the executable, not the .o to run the tests from.

Wed Jan 31 14:21:09 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/break.exp: Don't test for program exit or exit status
	if $noresults if nonzero.
	* gdb.base/langs.exp: Likewise.
	* gdb.base/watchpoint.exp: Likewise.

	* gdb.base/default.exp: Remove extraneous call to load gdb.exp.
	* gdb.chill/pr-8405.exp: Move skip_chill_tests check to just before
	trying to compile the testcase.

Wed Jan 24 23:42:39 1996  Doug Evans  <dje@charmed.cygnus.com>

	* gdb.base/interrupt.exp (p func1): xfail sparc64-*-solaris2.
	* gdb.base/signals.exp (continue to handler): Likewise.

Tue Jan 23 16:28:22 1996  Per Bothner  <bothner@kalessin.cygnus.com>

	* gdb.c++/classes.exp:  Now = returns false/true, not 1/0.

	* gdb.fortran/exprs.exp:  .LT. and .GT. now return .TRUE. or .FALSE..

Tue Jan 23 15:41:57 1996  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/corefile.exp: Recognize "not found" as failure
	when trying to determine if a core file was generated.
	If no core file was generate the first time, try again without
	the ulimit -c to work around braindamaged shells.

Mon Jan 15 09:33:00 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.stabs/configure.in (alpha-*-*,mips-*-*): Replace
	[] tests with "test" and enclose string in quotes.
	* gdb.stabs/configure: Rebuild
	
Thu Jan 11 09:43:14 1996  Tom Tromey  <tromey@creche.cygnus.com>

	Changes in sync with expect:
	* aclocal.m4 (CY_AC_PATH_TCLH): Handle Tcl 7.5 and greater.
	(CY_AC_PATH_TCLLIB): Handle Tcl 7.5 and greater.
	(CY_AC_PATH_TKH): Handle Tk 4.1 and greater.
	(CY_AC_PATH_TKLIB): Handle Tk 4.1 and greater.  Properly quote
	argument to AC_REQUIRE.
	* configure: Regenerated.

Thu Jan  4 08:17:22 1996  Fred Fish  <fnf@cygnus.com>

	* gdb.base/corefile.exp: When generating a core, discard any
	error messages about ulimit not found and the "core dumped"
	message from the shell that runs the coredumper.

Wed Jan  3 01:30:41 1996  Jeffrey A Law  (law@cygnus.com)

	* lib/gdb.exp (skip_chill_tests): Skip them on the PA too.

	* gdb.stabs/weird.exp: Use ${target_triplet} to determine
	which sed script to run.  Expect failure for v_comb test
	on PA targets too.
	
Sat Dec 30 16:09:04 1995  Fred Fish  <fnf@rtl.cygnus.com>

	* gdb.base/corefile.exp: Remove "i*86-*-linux" xfail for
 	"print func2::coremaker_local" and for "backtrace in corefile.exp"

Sat Dec 30 12:59:12 1995  Fred Fish  <fnf@cygnus.com>

	* lib/gdb.exp: Fix typo and rewrite skip_chill_tests.
	* gdb.stabs/weird.exp: Setup "sparc-sun-sunos4*" and
 	"sparc-sun-solaris*" xfails for "p v_comb".
	* lib/gdb.exp (default_gdb_start): Fix typo.
	* gdb.base/corefile.exp: Allow "Core was generated by ..."
	messages to not include the full program name that caused
	the core dump since some systems (such as solaris) apparently
	truncate this path to about 80 characters.
	When generating a core file first try increasing the core file
	size limit to unlimited since some systems may default it to
	zero, and it is harmless to try it.  Move the test for failing
	to generate a core file to where it will actually get executed.
	* gdb.c++/templates.exp (test_ptype_of_templates): Accept
	new gdb result from g++ debug info improvements and make old
	pattern obsolescent.  Also account for size_t differences
	(may be int or long).
	* gdb.base/a1-selftest.exp (test_with_self): Check for case where
	initialization before function call is placed in the delay slot
	and thus appears to be skipped over by commands such as "next".

Fri Dec 29 16:09:20 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/a1-selftest.exp (test_with_self): Run without windows.

Wed Dec  6 10:45:42 1995  Jeffrey A. Law  <law@sethra.cygnus.com>

	* gdb.base/*.exp: Make ${srcfile} only be the basename of the
	input source file; fix code to compile test to deal with this
	convention.
	* gdb.c++/*.exp: Likewise.

Mon Nov 27 11:40:16 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/signals.exp: Setup "alpha-*-osf2*" xfail for
	"bt in signals.exp".

Sat Nov 25 20:52:15 1995  Fred Fish  <fnf@phydeaux.cygnus.com>

	* gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for
	"step over execarg initialization" and
 	"step over corearg initialization".

Sat Nov 25 18:20:14 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/ptype.c (main): Declare malloc as a "char *" for systems
	with sizeof(pointer) > sizeof(int).  Avoid "void *" or include files.

Sat Nov 25 11:03:42 1995  Fred Fish  <fnf@cygnus.com>

	From Rob Savoye  (rob@poseidon.cygnus.com)
	* Makefile.in, configure.in, gdb.base/{Makefile.in, configure.in},
	gdb.c++/{Makefile.in, configure.in}, gdb.chill/{Makefile.in,
 	configure.in}, gdb.disasm/{Makefile.in, configure.in},
 	gdb.stabs/{Makefile.in, configure.in}, gdb.threads/{Makefile.in,
 	configure.in}: Major reworking for autoconfig.
	* aclocal.m4, configure, gdb.base/configure, gdb.c++/configure,
	gdb.disasm/configure, gdb.stabs/configure, gdb.stabs/default.mt :
 	New files.
	* config/unix-gdb.exp:  Make GDB global.
	* gdb.base/{a1-selftest.exp, a2-run.exp,bitfields.exp, break.exp,
 	callfuncs.exp, commands.exp, corefile.exp, crossload.exp, exprs.exp,
 	funcargs.exp, interrupt.exp, langs.exp, list.exp, mips_pro.exp,
 	nodebug.exp, opaque.exp, printcmds.exp, ptype.exp, recurse.exp,
 	regs.exp, return.exp, scope.exp, setvar.exp, sigall.exp, signals.exp,
 	term.exp, twice.exp, watchpoint.exp, whatis.exp},
	gdb.c++/{classes.exp, callfuncs.exp, inherit.exp, misc.exp,
 	templates.exp, virtfunc.exp}, gdb.chill/{callch.exp, chillvars.exp,
 	misc.exp, pr-4975.exp, pr-5016.exp, pr-5020.exp, pr-5022.exp,
 	pr-5646.exp, pr-5984.exp, pr-6292.exp, pr-6632.exp, pr-8134.exp,
 	pr-8136.exp, result.exp, string.exp, tuples.exp},
	gdb.disasm/{hppa.exp, sh3.exp}, gdb.stabs/weird.exp: Change continues
 	to returns as necessary, arrange for test to compile own testcase
 	executable.
	* lib/gdb.exp: Changes for testsuite to compile own test cases.
	
Tue Nov 21 16:15:45 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.c++/classes.exp (test_pointers_to_class_members): Add
 	clear_xfail at end of test which might not call either pass or fail.
	* gdb.base/a1-selftest.exp: Add i*86-*-linuxaout xfail for
	"backtrace through signal handler".

Sat Nov 18 04:09:31 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/sigall.exp:  Work around OSF/1-3.x kernel bug when
	continuing from a job control stop signal.
	* gdb.stabs/alpha.mt:  Use $(CFLAGS) when building weird.o.

Wed Nov 15 00:28:03 1995  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/callfuncs.exp: Remove bogus hppa xfails.
	* gdb.base/corefile.exp: Likewise.
	* gdb.base/funcargs.exp: Likewise.

Tue Nov 14 15:18:10 1995  Stu Grossman  (grossman@cygnus.com)

	* config/hmsirom.exp:  Setup for talking to hmsi ROM monitor.
	* config/monitor.exp:  Add support for setting baud rate.

Sat Nov  4 15:35:52 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and
	i*86-*-linux* xfails for "backtrace through signal handler".
	* gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for
	"print func2::coremaker_local".
	* gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4,
 	alpha-dec-osf2* xfail for
	"delete all breakpoints when none".

Wed Nov  1 15:57:16 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/break.exp: Change test that deletes all breakpoints
	when no user breakpoints are installed.  A post 4.15 change
	causes gdb to no longer prompt in this case.

Tue Oct 31 15:13:43 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/return.exp (return_tests):  Change xfail for test
	"correct value returned double test" to stop xfailing at
	Solaris 2.5.  Apparently the bug has been fixed.

Sun Oct 29 12:18:16 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.stabs/ecoff.sed: Remove comment lines except for first one.
	IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere.

Tue Oct 24 11:12:12 1995  Jeffrey A Law  (law@cygnus.com)

	* gdb.disasm/hppa.exp: Test lci and syncdma instructions.
	* gdb.disasm/hppa.s: Corresponding changes.

Wed Oct 18 11:27:47 1995  Jeffrey A Law  (law@cygnus.com)

	* gdb.base/configure.in (hppa*-*-hpux*): No longer needs target
	makefile fragment.
	* config/mt-hpux: Deleted.

Tue Oct 17 23:02:12 1995  Jeffrey A Law  (law@cygnus.com)

	* Many files: When warning about suppressed tests due to a 
	nonexistant test binary, avoid incrementing the warning count.

Tue Oct 10 11:00:41 1995  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (TARGET_FLAGS_TO_PASS):  Remove BISON.
	
Sun Oct  8 04:23:14 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/return.exp:  Change xfail from "sparc-*-solaris2.*" to
	"sparc-*-solaris2*".

Sat Sep 23 01:22:23 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/coremaker.c:  Produce a full core dump for AIX targets.
	Add global and local variables and initialize them.
	* gdb.base/corefile.exp:  Test correct mapping of corefile sections
	by printing variables. Remove rs6000 and powerpc xfails, BFD now
	extracts the file name and terminating signal from the core file.
	* TODO:  Remove note about tests for correct mapping of corefile.
	* gdb.base/ptype.c (main):  Use boolean2 to inhibit AIX 4.1 xlc
	from optimizing it away.
	* gdb.stabs/weird.exp:  Remove rs6000 xfail, xcoffread.c now
	handles common blocks.

Thu Sep 21 01:28:10 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/sh3.s (fmac): Update for new assembler syntax
	* gdb.disasm/sh3.exp (fmac): Corresponding changes.

Wed Sep 20 13:15:05 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (maintainer-clean): New target, synonym for
	realclean.
	* gdb.base/Makefile.in (maintainer-clean): Likewise.
	* gdb.c++/Makefile.in (maintainer-clean): Likewise.
	* gdb.chill/Makefile.in (maintainer-clean): Likewise.
	* gdb.disasm/Makefile.in (maintainer-clean): Likewise.
	* gdb.stabs/Makefile.in (maintainer-clean): Likewise.
	* gdb.threads/Makefile.in (maintainer-clean): Likewise.

Sun Sep 10 13:14:01 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/scope.exp (text_at_main):  Add "hppa*-*-hpux*"
	xfails when not gcc compiled for "print foo::funclocal".
	(test_at_foo):  Add "hppa*-*-hpux*" xfails when not gcc compiled for:
	"print foo::funclocal at foo",
	"print 'scope1.c'::foo::funclocal at foo",
	"print foo::funclocal_bss at foo",
	"print 'scope1.c'::foo::funclocal_bss at foo",
	"print foo::funclocal_ro at foo",
	"print 'scope1.c'::foo::funclocal_ro at foo",
	"print bar::funclocal at foo" and
	"print 'scope1.c'::bar::funclocal at foo".
	(test_at_bar):  Add "hppa*-*-hpux*" xfails when not
	gcc compiled for "print foo::funclocal at bar".
	Expand all messages to ensure that they identify that
	the test is at bar().
	* gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not
	gcc compiled for:
	"ptype on opaque struct pointer (statically)",
	"ptype on opaque struct tagname (statically)",
	"ptype on opaque struct pointer (dynamically) 1",
	"ptype on opaque struct tagname (dynamically) 1",
	"ptype on opaque struct pointer (dynamically) 2" and
	"ptype on opaque struct tagname (dynamically) 2
	* gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not
	gcc compiled for:
	"p datalocal"
	"whatis datalocal",
	"ptype datalocal",
	"p bsslocal",
	"whatis bsslocal", and
	"ptype bsslocal".
	* gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for
	"backtrace in langs.exp" and "up to langs0__2do in langs.exp"
	when not gcc compiled.
	* gdb.base/funcargs.exp (float_and_integral_args):  Add
	"hppa*-*-hpux*" xfail for "run to call2a" when not gcc
	compiled.
	(discard_and_shuffle):  Add "hppa*-*-hpux*" xfail for
	"backtrace from call6a" when not gcc compiled.
	(shuffle_round_robin): Add "hppa*-*-hpux*" xfail for
	"backtrace from call7a" when not gcc compiled.
	* gdb.base/callfuncs.exp (do_function_calls):
	Add "hppa*-*-hpux*" xfail when not gcc compiled for
	"p t_char_array_values(char_array_val2,char_array_val1)",
	"p t_char_array_values(char_array_val1,char_array_val2)",
	"p t_char_array_values("carray 1","carray 2")",
	"p t_char_array_values("carray 1",char_array_val2)",
	"p t_char_array_values(char_array_val1,"carray 2")",
	"p sum_args(1,{2})",
	"p sum_args(2,{2,3})",
	"p sum_args(3,{2,3,4})",
	"p sum_args(4,{2,3,4,5})"
	* gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for
	"backtrace in corefile.exp" when not gcc compiled.

Sat Sep  9 01:35:39 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/signals.exp:  Rewrite `handle all print' test as
	a procedure. Accept blanks or TABs as whitespace, increase
	timeout and expect input buffer size for the large output
	from the command. Remove "i*86-*-bsdi2.0" xfail.

Sat Sep  2 06:41:26 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/setvar.exp:  Add new testcases for truncation when
	assigning invalid values to bitfields.

Sat Sep  2 00:17:31 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp (do_function_calls):  Remove 
	mips-sgi-irix* xfail for
	"call inferior func with struct - returns char *"
	and fix test so that an optional (unsigned char *) cast is
 	accepted in the result.

Fri Sep  1 13:42:01 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/funcargs.exp (float_and_integral_args):  Remove
	sparc-sun-solaris2* xfail for "print f1 after run to call2a".
	* gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix.
	* gdb.base/signals.exp: Remove duplicate "handle all print" test
	that accidentally got checked in.

Sun Aug 27 23:35:35 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp (do_function_calls):  Add alpha-dec-osf2* 
	clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc
	compiled test.
	* gdb.base/opaque.exp (setup_xfail_on_opaque_pointer):
	Add mips-sgi-irix5* xfail for not gcc compiled.
	* gdb.base/Makefile.in (nodebug.o):  Also create nodebug.ci.
	* gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for
	"p top", "whatis top", "p middle", and "whatis middle".
	* gdb.base/whatis.exp: Add mips-sgi-irix* xfail for
	"whatis signed char" for not gcc compiled.
	* gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for
	"set variable signed char=-1 (-1)" and
	"set variable signed char=0xFF (0xFF)" for not gcc compiled.
	* gdb.base/funcargs.exp (float_and_integral_args):
	Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled.
	Add mips-sgi-irix* xfail when not gcc compiled for
	"continue to call2b".
	Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for
	"continue to call2g".
	(discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for
	"backtrace from call6a"
	(shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for
	"backtrace from call7k".
	Add mips-sgi-irix5* xfail when not gcc compiled for
	"backtrace from call7a".
	(localvars_after_alloca):  Fix gdb_test cmds for
	"print * after runto ...".
	Remove rs6000-*-* xfails for
	"print i after runto localvars_after_alloca" and
	"print l after runto localvars_after_alloca"
	for all compilers.
	* gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5),
 	when not compiled with gcc, for:
	"print signed char == (minus)",
	"print signed char != (minus)",
	"print signed char < (minus)",
	"print signed char > (minus)".
	* gdb.base/callfuncs.exp (do_function_calls):
	Add mips-sgi-irix* xfail, when compiled with native compiler, for
	"call inferior func with struct - returns char *".
	* gdb.base/return.exp (return_tests): Change xfail for 
	"correct value returned double test" to include Solaris 2.4.
	* gdb.base/funcargs.exp (float_and_integral_args):
	Add sparc-sun-solaris2* xfail for "print f1 after run to call2a".
	
Sat Aug 26 00:26:11 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/setvar.c, gdb.base/setvar.exp:  Add new tests for
	enumeration bitfields if compiling with GNU C.
	* lib/gdb.exp:  Consume `(y or n) ' in `Reinitialize source path
	to empty' prompt.

Tue Aug 22 00:30:37 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run
	test for PRO targets.

	* gdb.base/funcargs.exp: Avoid ever setting more than 8
	breakpoints in the inferior at any given time by making
	two groups of breakpoints for call2*, call6* and call7*
	tests.

Sun Aug 20 06:58:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/funcargs.exp:  Fix typos introduced by Aug 15 change.
	* gdb.base/callfuncs.c (main):  Use struct_val1 to inhibit xlc
	from optimizing it away.
	* gdb.base/callfuncs.exp:  Remove rs6000-*-* xfails for
	"call inferior func with struct".

Wed Aug 16 11:57:15 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* configure.in: Only configure gdb.chill for particular targets.

Tue Aug 15 09:42:44 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/Makefile.in:  Add action to .c.o transformation
	rule that generates a .ci file for each .o file and remove
	explicit .c.o rules except for callfuncs.o.
	* gdb.c++/Makefile.in:  Add .cc.o transformation rule that
	generates a .ci file for each .o file and remove explicit
	.cc.o rules.
	(clean): Remove *.tmp *.ci files.
	(EXECUTABLES): Remove templ-info.exp.
	* gdb.base/compiler.c: New file.
	* gdb.c++/compiler.cc: New file
	* gdb.base/scope.exp: Source gdb.base/scope.ci.
	Change rs6000-*-* xfail for
	"print 'scope0.c'::filelocal_ro" and
	"print 'scope1.c'::filelocal" and
	"print 'scope1.c'::filelocal_bss" and
	"print 'scope1.c'::filelocal_ro" and
	"print 'scope1.c'::foo::funclocal" and
	"print 'scope1.c'::foo::funclocal_ro" and
	"print 'scope1.c'::bar::funclocal" and
	"print 'scope0.c'::filelocal_ro" and
	"print 'scope1.c'::filelocal at foo" and
	"print 'scope1.c'::filelocal_bss at foo" and
	"print 'scope1.c'::filelocal_ro at foo" and
	"print 'scope1.c'::foo::funclocal at foo" and
	"print 'scope1.c'::foo::funclocal_bss at foo" and
	"print 'scope1.c'::foo::funclocal_ro at foo" and
	"print 'scope1.c'::bar::funclocal at foo" and
	"print 'scope0.c'::filelocal_ro" and
	"print 'scope1.c'::filelocal" and
	"print 'scope1.c'::filelocal_bss" and
	"print 'scope1.c'::filelocal_ro" and
	"print 'scope1.c'::foo::funclocal" and
	"print 'scope1.c'::foo::funclocal_bss" and
	"print 'scope1.c'::foo::funclocal_ro" and
	"print 'scope1.c'::bar::funclocal" and
	"print 'scope1.c'::bar::funclocal_bss"
	to only be xfail'd when not compiled with gcc.
	Add rs6000-*-* xfail for 
	"print 'scope0.c'::filelocal_bss before run"
	when compiled with gcc.
	(test_at_main): Add rs6000-*-* xfail for
	"print filelocal_ro in test_at_main"
	when compiled with gcc.
	* gdb.base/ptype.exp: Source gdb.base/ptype.ci.
 	Add rs6000-*-aix* xfail for 
	"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and
	"ptype t_char_array",  not compiled with gcc.
	* gdb.base/list.exp (test_list_function):  Add rs6000-*-*
	xfail for "list foo (in include file)" when gcc	compiled.
	* gdb.base/funcargs.exp: Source gdb.base/funcargs.ci
 	(integral_args): Add rs6000-*-* xfail for
	"run to call0a" if not compiled with gcc.
	(unsigned_integral_args): Add rs6000-*-* xfail for
	"run to call1a" if not compiled with gcc.
	(float_and_integral_args):  Add rs6000-*-* xfail for
	"run to call2a" if not compiled with gcc and for
	"continue to call2b" for any compiler.
	Add rs6000-*-* xfail to
	"print f1 after run to call2a" for gcc compiled.
	(discard_and_shuffle): Add rs6000-*-* xfail for
	"run to call6a".
	(shuffle_round_robin): Add rs6000-*-* xfail for
	"backtrace from call7a" if not compiled with gcc.
	Add rs6000-*-* xfail for
	"backtrace from call7b" if compiled with gcc.
	(call_after_alloca): Add rs6000-*-* xfail for
	"print c in call_after_alloca" and
	"print s in call_after_alloca" and
	"backtrace from call_after_alloca_subr"
	if not compiled with gcc.
	(localvars_in_indirect_call): Add rs6000-*-* xfail for
	"print c in localvars_in_indirect_call" and
	"print c in localvars_in_indirect_call" and
	"backtrace in indirectly called function" and
	"stepping into indirectly called function"
	if not compiled with gcc.
	(localvars_after_alloca): Add rs6000-*-* xfail for
	"print c after runto localvars_after_alloca" and
	"print s after runto localvars_after_alloca" and
	"print i after runto localvars_after_alloca" and
	"print l after runto localvars_after_alloca"
	for all compilers.
	* gdb.base/whatis.exp: Source gdb.base/whatis.ci rather
	than whatis-info.exp.
	* gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather
	than opaque-info.exp.
	Setup rs6000-*-* xfail for
	"ptype on opaque struct pointer (statically)" and 
	"ptype on opaque struct pointer (dynamically)" when
	not compiled with gcc.
	* gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci
	rather than callf-info.exp.
	(do_function_calls):  Add clear_xfail for rs6000-*-* for
	"p t_float_values2(3.14159,float_val2)".  Seems to work
	fine there, both with xlc and gcc.  Need to find out what
	it is doing right and fix other platforms.
	* gdb.base/callfuncs.exp: Add rs6000-*-* xfail for
	"call inferior func with struct - returns int",
	"call inferior func with struct - returns long",
	"call inferior func with struct - returns float",
	"call inferior func with struct - returns double",
	"call inferior func with struct - returns char *",
	but only if not gcc compiled (presumes xlc compiled).
	Change rs6000-*-* xfails for
	"call inferior func with struct - returns char" and
	" call inferior func with struct -  returns short" to only
	xfail if not using gcc.
	(clean mostlyclean):  Remove *.ci and *.tmp files.
	* gdb.c++/templates.exp: Source gdb.c++/templates.ci rather
	than templ-info.exp.
	* gdb.base/langs.exp:  Source gdb.base/langs.ci.
	Add rs6000-*-* xfail for "up to foo in langs.exp"
	"up to cppsub_ in langs.exp" and "up to fsub in langs.exp"
 	when not gcc compiled.
	
Sat Aug 12 15:05:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* gdb.base/callfuncs.exp: Add xfails for the powerpc.
	* gdb.base/corefile.exp: Likewise.
	* gdb.base/list.exp: Likewise.
	* gdb.base/scope.exp: Likewise.
	* gdb.base/siganls.exp: Likewise.

	* gdb.base/nodebug.exp: Add xfails for the powerpc.  Handle aix4
	compiler output.
	* gdb.base/whatis.exp: Likewise.

Fri Aug 11 13:36:20 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a
	failure (opcode table has been fixed to match reality).

Mon Aug 14 09:01:59 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp: Add rs6000-*-* xfails for
	"call inferior func with struct - returns char",
	"call inferior func with struct - returns short"

	* gdb.base/scope.exp: Remove rs6000-*-* xfails for
	"print 'scope0.c'::filelocal at main",
	"print 'scope0.c'::filelocal_bss in test_at_main",
	"print 'scope0.c'::filelocal at foo",
	"print 'scope0.c'::filelocal_bss in test_at_foo",
	"print 'scope0.c'::filelocal at bar",
	"print 'scope0.c'::filelocal_bss in test_at_bar"
	
	* gdb.base/list.exp: Remove rs6000-*-* xfail for "list function
	in source file 1".  This bug seems to have been fixed with both
	gcc and native cc (was native assembler bug?).

Wed Aug  9 08:04:12 1995  Fred Fish  (fnf@cygnus.com)

	* gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for
	"backtrace through signal handler" to "i*86-*-sysv4*".
	* gdb.base/signals.exp: Add xfail for "'next' behaved as
	continue" case.  Add "known SVR4 bug" to fail message.
	Add "i*86-*-bsdi2.0" xfail for "handle all print".
	Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
	* gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
	"whatis unnamed typedef'd enum..." and "ptype t_char_array".
	* gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
	"up to foo in langs.exp", "show language at foo in
	langs.exp", "up to cppsub_ in langs.exp", "show
	language at cppsub_ in langs.exp", "up to fsub in
	langs.exp", and "show language at fsub in langs.exp".
	* gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
	"bactrace in corefile.exp".
	* gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
	"call inferior function with struct - returns float" and
	"call inferior function with struct - returns double".
	
Mon Aug  7 02:43:28 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/sh3.s: Source for sh3 disassembler tests.
	* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
	* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
	* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.

Mon Aug  7 08:09:37 1995  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (CHILL_FOR_TARGET): Use previously defined
	(or overriden) "CHILL" macro rather then bare "gcc".
	Also look for ../../gcc/xgcc since that is what we will
	actually need, not "Makefile".  Remove following assignment
	of CHILL to CHILL_FOR_TARGET because that results in
	recursive definition.

Sun Aug  6 16:52:29 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/corefile.exp:  Change xfail for backtrace in
	corefile.exp from linuxaout to all linux.
	* gdb.base/sigall.exp (test_one_sig):  Specifically deal with
	cases where we miss the breakpoint at the signal handler
	for some reason.  Setup xfail for linuxoldld/linuxaout and
	getting SIGIO.  Setup xfail for linuxoldld/linuxaout for
	hitting SIGURG breakpoint.
	* gdb.base/signals.exp:  Setup xfail for "next" acting like
	continue to add linuxoldld.  Setup xfail for all linux for
	"next to handler in signals_tests_1", "backtrace in
	signals_tests_1", "continue to func1", "pass SIGUSR1",
	and continue to handler".

Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>

	* Update all FSF addresses except those in COPYING* files.

Sun Jul 30 17:50:35 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/a2-run.exp: Change messages to be more explicit about
	the status of args, and quote binfile in results.

Sun Jul 30 10:24:20 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/callfuncs.exp: Add tests for passing structs to
	inferior functions and return various types.
	* gdb.base/callfuncs.c: Add functions to receive a struct
	and return a member of the struct, in various types.

Sat Jul 29 14:22:33 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/Makefile.in (clean):  Remove callf-info.exp.

Fri Jul 28 13:36:11 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>

	* config/vxworks29k.exp: New file, sources vxworks.exp.

Fri Jul 28 00:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* config/gdbremote.exp: New file.  Testing framework using
	gdbserver.

Thu Jul 27 12:17:14 1995  Fred Fish  (fnf@cygnus.com)

	* gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for
	"call function when asleep" and "send end of file".
	* gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
	for "backtrace in corefile.exp".
	* gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
	for "backtrace through signal handler".
	* gdb.base/corefile.exp: Make sure we actually generate a core file
	before trying the core tests.  Some systems allow the user to suppress
	generation of core files and default to that (linux for example).
	* gdb.base/signals.exp: Change xfail for "next" acting like "continue"
	from "i*86-*-linux" to "i*86-*-linuxaout".  Works with ELF beta.

Tue Jul 25 17:30:10 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* gdb.threads: New directory with some crude multi-threaded
	gdb tests (step.exp and step2.exp).
	* config/mt-lynx (STEP_EXECUTABLE): Define.
	(THREADFLAGS): Define.

Tue Jul 25 01:03:52 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx.

	* gdb.base/signals.exp: Disable whole file for lynx until
	further notice.

	* gdb.base/signals.exp: xfail test where "next" acts like
	"continue" for lynx.

	* gdb.base/interrupt.exp: xfail test for calling function while
	inferior is asleep for lynx.

	* gdb.base/watchpoint.exp: Handle more cases of gdb echoing more
	than one cr-lf	after each command.

Sun Jul 23 23:33:18 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* configure.in:  Reinstate setting of stabsdirs variable, fix
	typo in setting up configdirs for native builds.

	* gdb.base/return.exp:  Fix typo in return double test.
	* gdb.base/return.c (tmp2, tmp3):  Made global to inhibit the
	compiler from optimizing them away.

Fri Jul 21 11:39:34 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/gdbvars.exp: Expect zero or more additional cr-lf
	sequences to be echo'd by gdb when using gdb_test.
	* gdb.chill/chexp.exp: Likewise.
	* gdb.fortran/exprs.exp: Likewise

Thu Jul 20 13:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

	* gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds
	after the inferior gdb has started.

	* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
	after each command.
	* gdb.base/funcargs.exp: Likewise.
	* gdb.base/gdbvars.exp: Likewise.
	* gdb.base/interrupt.exp: Likewise.
	* gdb.base/list.exp: Likewise.
	* gdb.base/watchpoint.exp: Likewise.
	* gdb.c++/demangle.exp: Likewise.
	* gdb.c++/inherit.exp: Likewise.
	* gdb.chill/chexp.exp: Likewise.
	* gdb.fortran/exprs.exp: Likewise.

	* gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall
	test if we can't handle IO to/from the inferior.

	* gdb.c++/misc.exp: Always check for a program already being
	started after sending a "run" command to gdb.

	* gdb.base/twice.exp: Start with a fresh gdb.

	* gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests
	only depend on gdb's expression code, not the chill runtime.

	* gdb.base/return.c: Put return values into variables so we
	can have gdb print them rather than depending on the program
	to print them.
	* gdb.base/return.exp: Corresponding changes.

	* lib/gdb.exp: Provide default value for noinferiorio.
	* gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from
	the inferior.

	* gdb.base/break.exp: Always check for a program already being
	started after sending a "run" command to gdb.
	(text_next_with_recursion): Don't check the output from the
	program's printf statement.  Instead just make sure the program
	exited.

	* gdb.base/commands.exp: Protect tests which need arguments with
	$noargs conditionals.

Wed Jul 19 22:42:43 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/printcmds.exp:  Adjust expect patterns for addresses
	of structure member arrays to match gdb/valops.c:value_addr change.

Mon Jul 17 10:12:27 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout
	cases.

Wed Jul 12 10:20:08 1995  Fred Fish  (fnf@cygnus.com)

	* configure.in (configdirs):  Remove gdb.chill from default list
	of subdirs and then add it back in only if doing a native build.
	The current chill compiler does not yet work in any cross build.
	* Revert all signal changes from Jul 6.
	* gdb.base/{sigall.c signals.c}:  Define away signal() and alarm()
	for sh-hms targets, allowing these tests to link, with no other
	changes.  Testing is suppressed by setting "nosignals" in site.exp.

Thu Jul  6 20:58:30 1995  Fred Fish  (fnf@cygnus.com)

	* configure.in (signaldirs): Define and add to configdirs for all
	targets except some specific ones that are known to not support signals.
	Also clean up formatting.
	* gdb.base/Makefile.in (EXECUTABLES):  Remove sigall and signals.
	(signals, sigall):  Remove rules to build.
	* gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}:
	Moved to new gdb.signals directory.
	* gdb.signals: New test directory.
	* gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp,
	signals.c signals.exp}:  New or moved files.

Sun Jun 25 12:55:18 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist.

Wed Jun 21 16:35:55 1995  Fred Fish  <fnf@cygnus.com>

	* gdb.base/return.exp:  Xfail `return double' test failure
	on at least Solaris 2.3 and handle future/past versions on
	a case by case basis as appropriate.  Also update message
	to include i*86 failures.

Wed May 24 07:10:10 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS.

	* lib/gdb.exp: Fix comment which erroneously identified
	gdb_file_cmd as gdb_load (the 19 May change was in fact to
	gdb_file_cmd not gdb_load).
	* config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout".

	* gdb.base/setvar.exp: Make test names consistent between pass and
	fail cases.  Use gdb_test more.

Fri May 19 07:22:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp (gdb_load): Add "upvar timeout timeout".

Mon May 15 23:50:51 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/help.exp:  Fix expected help string for `show commands'.

Thu May 11 07:55:11 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>

	* gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM.

	* gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack
	of a text section.

Thu May 11 15:02:24 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* config/monitor.exp (gdb_target_monitor):  Fix loop interator so
	that loop eventually terminates.  Fix Connection refused logic so
	that testsuite will expire nicely.

Wed May 10 17:57:35 1995  Stu Grossman  (grossman@andros.cygnus.com)

	* config/cpu32bug.exp, config/est.exp, config/hppro.exp,
	config/rom68k.exp:  New tcl glue for the appropriate monitors.
	These all just end up calling monitor.exp.
	* config/monitor.exp (gdb_target_monitor):  Handle `Connection
	refused' by retrying.  Cleanup some timeout issues.
	* (gdb_load):  Reduce timeout.  Cleanup some timeout issues.
	* lib/gdb.exp (gdb_test gdb_test_exact):  Upvar timeout so that
	callers don't have to set/restore global timeout variable.

	* The following set of changes centralizes management of the global
	timeout	variable.  This way, it can be set in one target dependent
	place instead of dozens of places scattered throughout the test suite.
	If you need to lengthen a timeout, then you should either set timeout
	in one of the config/{target}.exp files, or multiply it by a factor.
	Setting it to an absolute value is always going to lose for some
	targets.
	* gdb.base/a1-selftest.exp (test_with_self):  Only use local timeout.
	* gdb.base/callfuncs.exp (do_function_calls):  Don't set timeout.
	* gdb.base/funcargs.exp:  Don't set timeout.
	* gdb.base/list.exp (test_forward_search):  Only use local timeout.
	* gdb.base/printcmds.exp (test_print_string_constants
	test_print_array_constants):  Don't set timeout.
	* gdb.base/ptype.exp:  Don't set timeout.
	* gdb.base/recurse.exp:  Don't set timeout.
	* gdb.base/return.exp:  Don't set timeout.
	* gdb.base/watchpoint.exp:  Don't set timeout.
	* gdb.c++/classes.exp (do_tests):  Don't set timeout.
	* gdb.c++/virtfunc.exp (test_virtual_calls):  Don't set timeout.

Wed May 10 16:03:23 1995  Torbjorn Granlund  <tege@adder.cygnus.com>

	* Makefile.in: Make clean targets work also when SUBDIRS is empty.

Mon May  1 07:32:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp: Disable chill tests for irix5.

Wed Apr 26 07:36:03 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/scope.exp: Make test names unique.  Use gdb_test.  Make
	each test pass or fail.

Sun Apr 23 21:32:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/opaque.exp: Remove xfails for aix; print a warning if
	xlc not gcc.

Fri Apr 21 15:44:02 1995  Stu Grossman  (grossman@rtl.cygnus.com)

	* cpu32bug.exp est.exp rom68k.exp:  Delete.  Unify into monitor.exp.

Wed Apr 19 17:41:21 1995  Stu Grossman  (grossman@cygnus.com)

	* config/est.exp:  Fix copyright and comments.  Remove dead code.
	Use targetname, serialport and baud variables instead of fixed
	constants.
	* config/rom68k.exp:  Fix copyright and comments.  Remove dead code.
	* config/cpu32bug.exp:  New file to support cpu32bug monitors.

Wed Apr 19 13:47:16 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/watchpoint.exp: Don't run
	test_watchpoint_triggered_in_syscall for sunos.

Mon Apr 17 12:48:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h;
	they don't seem to exist.  Do include stdio.h.

Fri Apr 14 09:40:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/a1-selftest.exp: Add alpha xfail.

Mon Apr 10 13:07:50 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/watchpoint.c (main): Prompt before calling read().
	* gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall):
	Revise accordingly.  Remove cruft about sending "123" several
	times, until it gets noticed.  Clean up the "print buf[0]" stuff
	so that it passes or fails, and waits for prompts in the usual way.

Sun Apr  9 09:02:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/recurse.exp: Fix comment.

	* TODO: Remove item about printing variables in nodebug.exp.  Add
	item about enabling tests which are only run on some targets.

	* gdb.base/watchpoint.exp: Various cleanups (make each test pass or
	fail, make test names unique, use new gdb_test convention
	regarding pattern, use gdb_test more, etc.).

	* gdb.base/bitfields.exp: Various cleanups (make each test pass or
	fail, make test names unique, etc.).

Sat Apr  8 02:47:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/nodebug.c:  Change return type of top and middle to
	short.
	* gdb.base/nodebug.exp:  Remove xfails for ecoff systems, they
	are fixed by the recent mdebugread.c changes. Allow `short ()'
	as type for top and middle.

Thu Apr  6 08:54:18 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/break.exp: Remove commented out if $usestubs {}.  As
	nearly as I can tell, the whole thing was an accident in Stu's
	change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant
	to replace a send/expect pair with gdb_test, but ended up only
	adding the gdb_test.  My change of 24 Mar 1995 and Kung's change
	of 30 Mar 1995 took care of it, but left this vestigial comment
	which I am now nuking.

Mon Apr  3 09:00:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/break.exp: Look for different line number for
	breakpoint at main depending on usestubs.

Sun Apr  2 08:15:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/list.exp:  Adjust some alternate expect patterns to
	match recent list0.c change. Add alternate expect pattern for
	output from `list default lines around main' for optimizing
	compilers.

Sat Apr  1 07:23:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp: If nosignals is not set, set it to 0.

Fri Mar 31 16:13:48 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* config/slite-gdb.exp: Responds to load symbol table prompt.
	* gdb.base/break.exp: Adjust line number, fix rerun.
	* gdb.base/langs0.c: Add #ifdef usestubs.

Thu Mar 30 15:36:55 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* gdb.base/list.exp: Adjust line contents after adding new lines in
	list0.c. Also fix a syntax error.

	* lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs.
	* gdb.base/break.exp: ditto.
	* gdb.base/list.exp: ditto.
	* gdb.base/bitfields.c: Add #ifdef usestubs in main().
	* gdb.base/run.c: ditto.
	* gdb.base/list0.c: ditto.
	* gdb.base/funcargs.c: ditto.

Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)

	* testsuite/config/rom68k.exp (gdb_target_rom68k):  Use
	$targetname, $serialport and $baud instead of hardwired variables.
	* testsuite/gdb.base/{sigall.exp signals.exp}:  Skip these if the
	target doesn't support signals.

Wed Mar 29 12:29:34 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* lib/gdb.exp (runto_main): Fix regular expression bug, add return 1.

Tue Mar 28 08:46:45 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/recurse.exp: Make test names unique.  Change \\(+ to \\(.
	Don't rely on the value of an auto variable before it has been
	initialized.  Use gdb_test more.

Mon Mar 27 08:00:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp (default_gdb_version): A version number must start
	with a digit, but other than that contains all characters up to
	the first whitespace character.

Sun Mar 26 13:19:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/commands.exp (breakpoint_command_test): New tests.

Sat Mar 25 15:38:06 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.c++/*.exp: Warn if executable does not exist.  The original
	reason for skipping the warning was that configure.in sometimes
	intentionally skipped building the executables but the tcl code
	had no way of knowing.  That (a) was always bogus with respect to
	error handling, (b) is no longer true (right now there is no way
	to skip C++ tests).

	* gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.

Sat Mar 25 01:16:10 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/list.exp:  Add expect patterns for output from
	SunPRO compiled executables.
	* gdb.base/whatis.exp:  Allow leading `signed' for all v_signed_*
	types.

Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/break.exp (test_next_with_recursion): Accept any line
	number (we are already testing that the correct source line text
	gets printed).

	* gdb.base/break.exp: Make one test if $usestubs.  I'm not sure
	that is what is intended, but something needed to be done to get
	sunos4 native working again.

	* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).

	* gdb.base/a1-selftest.exp (test_with_self): Remove comment which
	apparently went with a (very) old xfail.

Fri Mar 24 13:41:09 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* gdb.base/callfuncs.exp: call runto_main instead of runto main.
	runto_main is a proc in gdb.exp that will do 'step' for target use
	stubs.
	* gdb.base/exprs.exp: ditto.
	* gdb.base/interrupt.exp: ditto.
	* gdb.base/opaque.exp: ditto.
	* gdb.base/printcmds.exp: ditto.
	* gdb.base/ptype.exp: ditto.
	* gdb.base/scope.exp: ditto.
	* gdb.base/setvar.exp: ditto.
	* gdb.base/signals.exp: ditto.
	* gdb.base/twice.exp: ditto.
	* gdb.c++/classes.exp: ditto.
	* gdb.c++/inherit.exp: ditto.
	* gdb.c++/templates.exp: ditto.
	* gdb.base/break.exp: no run and hit main for stubs. Change line
	numbers for breakpoints and info breakpoint.
	* gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
	breakpoint().
	* gdb.base/callfuncs.c: ditto.
	* gdb.base/exprs: ditto.
	* gdb.base/interrupt.c: ditto.
	* gdb.base/opaque0.c: ditto.
	* gdb.base/printcmds.c: ditto.
	* gdb.base/ptype.c: ditto.
	* gdb.base/scope0.c: ditto.
	* gdb.base/setvar.c: ditto.
	* gdb.base/signals.c: ditto.
	* gdb.base/twice.c: ditto.
	* gdb.c++/misc.cc: ditto.
	* gdb.c++/templates.cc: ditto.

Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.).

	* gdb.base/a1-selftest.exp: Don't check for # followed by a digit
	somewhere between `read' and `main.c'.  I'm pretty sure the
	pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
	and it isn't particularly useful.

	* gdb.base/scope.exp: Make test names unique.  \[(\] -> \\(.

Thu Mar 23 14:58:35 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/commands.exp (infrun_breakpoint_command_test): New test.

Wed Mar 22 18:36:05 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* config/mt-slite: add LIBS and -nostdlib.
	* config/slite-gdb.exp: add this new file to support sparclite target.

Tue Mar 21 21:41:04 1995  Doug Evans  <dje@canuck.cygnus.com>

	* config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code.

	* gdb.base/a2-run.exp: Change argument to istarget from
	"*-*-vxworks" to "*-*-vxworks*".
	* gdb.base/{break.exp,default.exp,scope.exp}: Likewise.

Tue Mar 21 17:08:47 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* lib/gdb.exp: add proc runto_main, for targets that use stubs, this
	will not runto main but do a 'step' to step out of breakpoint().
	* config/mt-slite: add -Dusestubs.

Tue Mar 21 12:14:12 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@
	instead of just @.

	* gdb.base/signals.exp: Add test for "handle all print".
	* TODO: Remove "handle all print".  Also remove item about
	checking copyright date (I don't like the idea of a spurious FAIL
	based on when we run the tests).

	* gdb.base/recurse.exp: Enable test for SunOS4.  xfail one test
	for SunOS4 (reason for failure not investigated).  Remove
	redundant test for $binfile.

	* gdb.base/nodebug.c (array_index): Call malloc.

	* gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique.

Mon Mar 20 10:08:17 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/recurse.exp: Update gdb_test invocation to use new
	conventions and slightly simplify the matching regexp.

Fri Mar 17 05:43:28 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/break.exp: Update gdb_test invocation to use new
	convention.

	* lib/gdb.exp: If noargs is not set, set it to 0.

	* gdb.base/nodebug.exp: Comment out redundant test.  Make name of
	tests unique.

	* lib/gdb.exp: Skip CHILL for AIX and Solaris.

Thu Mar 16 16:27:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have
	one argument of type "<non-float parameter>".

Wed Mar 15 15:54:56 1995  Stu Grossman  (grossman@cygnus.com)

	* config/rom68k.exp:  New file to support Motorola IDP board.
	* gdb.base/a2-run.exp:  Skip this file if noargs is set.
	* gdb.base/break.c:  Change things around so that this program
	doesn't depend upon args.  This is necessary to make remote
	targets work (in general, they can't take args).
	* gdb.base/break.exp:  Don't try to send args to program.  Don't
	expect output.  Also, replace lots of code with gdb_test.

Wed Mar 15 04:11:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/printcmds.exp (test_character_literals_accepted): Test
	printing of '\'' (which is what the comment says we are testing,
	even though we were not), not '''.
	(test_integer_literals_rejected): Test that printing ''' is an error.

	* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
	gdb.chill/chexp.exp, gdb.base/printcmds.exp,
	gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
	gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
	Use gdb_test not test_print_accept.
	* lib/gdb.exp: Remove test_print_accept.

	* gdb.base/signals.exp (signal_tests_1): Make pass message
	consistent with fail message.

	* gdb.base/whatis.exp: Remove xfails for printing char vs.
	unsigned char; the bug (PR 1821) is fixed.

	* gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868.

	* gdb.base/scope.exp (test_at_localscopes): Call pass for
	successful tests--makes xfailing them work right.

Tue Mar 14 07:39:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect
	only \r\n, not .*.  The test can pass .* as the last thing in
	$pattern if that is what it wants.  In addition to providing this
	flexibility, this change should speed up pattern matching in cases
	where the pattern already ended with .* (there were a number of
	them).  This change also helps catch bad patterns--in the old
	scheme the typo "char \*" instead of "char \\*" would pass.  Now
	it is caught.
	* Many .exp files: Update callers.

	* gdb.base/funcargs.exp: Replace \[(\]+ with \\(.  The latter is
	clearer and does not spuriously match multiple ('s.  Likewise for
	) and *.

	* gdb.base/nodebug.exp: Test ability to call a function and pass
	it a string (even with no debugging info).

	* gdb.base/printcmds.exp (test_integer_literals_rejected): Change
	"p '\'", which is the same as "p ''" once tcl gets done with
	quoting, to "p '\\'", which I suspect is what is intended (one
	backslash gets sent to GDB).

	* gdb.base/printcmds.exp (test_artificial_arrays): New tests.

Fri Mar 10 13:31:46 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/a1-selftest.exp: Remove xfail for solaris.  The bug (PR
	1817) was fixed literally years ago.

Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/funcargs.exp (call_after_alloca):  Remove `next'
	test, it causes stepping out of call_after_alloca_subr with
	optimizing compilers.
	(localvars_in_indirect_call):  Consume GDB prompt if `finish'
	fails.

	* gdb.c++/templates.exp:  Source templ-info.exp only if
	the templates executable exists.

	* gdb.c++/misc.cc (class Contains_static_instance,
	class Contains_nested_static_instance),
	gdb.c++/classes.exp (test_static_members):  Test printing of
	a class that contains a static instance of the class.

Thu Mar  9 11:43:55 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/langs2.c (cppsub_): Don't prototype.
	* gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value
	only, I believe).

Wed Mar  8 10:29:33 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp (skip_chill_tests): New procedure.

	* gdb.base/signals.exp (signal_tests_1): xfail for irix.

Mon Mar  6 10:44:06 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of
	each expect pattern.  Cuts runtime from 12 to about 4 seconds.

Thu Mar  2 05:31:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/langs.exp: Don't insist that foo__Fi be demangled.

	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only
	disassemble 8, not 16, instructions for part 4.

	* config/vx-gdb.exp (gdb_start): Use \030, not \CX.  tcl doesn't
	support the latter anymore.

	* gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try
	-DNO_PROTOTYPES.
	* gdb.base/callfuncs.c: Control use of prototypes based on
	NO_PROTOTYPES, not __STDC__.
	* gdb.base/callfuncs.exp (do_function_calls): xfail one of the
	t_float_values2 tests if prototypes in use.

	* gdb.base/callfuncs.c (t_float_values, t_float_values2,
	t_double_values):  When checking differences against DELTA, check
	that difference is within the range (-DELTA,DELTA), not just
	(-infinity,DELTA).

Tue Feb 28 16:28:54 1995  Kung Hsu  <kung@mexican.cygnus.com>

	* config/mips-gdb.exp (gdb_load): In every test case, we need to do
	'file' command firts, then 'target', then 'load', this is due to gdb
	target set up.
	* config/mips-gdb.exp: Fix a couple regular exp bugs.

Thu Feb 23 17:44:55 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing
	FP load/store variants.
	* gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants.

Wed Feb 22 18:29:08 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>

	* gdb.base/term.exp: Do not give a warning if not native, it is
	not an abnormal condition.

Tue Feb 21 13:08:47 1995  Jim Kingdon  <kingdon@cygnus.com>

	* gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype
	t_char_array".

Sun Feb 19 13:10:06 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>

	* lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we
	are getting the version number.

	* gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning
	if not native, it is not an abnormal condition.

Thu Feb 16 15:56:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp: Just use "file exists", rather than undocumented
	dejagnu procedure "findfile".

Thu Feb 16 10:30:24 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* config/mt-vxworks (CFLAGS): Set to -g -Dvxworks.
	  (LDFLAGS): Set to -Xlinker -Ur.

	* Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS):
	  Removed, these values are set by lib/gdb.exp.

	* lib/gdb.exp: If GDBFLAGS is unset, set it to -nx.

Wed Feb 15 14:23:28 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead
	  of replicating gdb startup code.

	* config/mt-vxworks (LDFLAGS): Set to -r.
	  (CFLAGS_FOR_TARGET): Removed.

	* config/vx-gdb.exp: always set prompt; gdb.exp sets it to
	  (gdb) and gdb for vxworks uses (vxgdb).

	* Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb
	  executable is not in the tree and host != target, use sed and
	  program_transform_name to determine the gdb name used by the
	  target.

	* configure.in, gdb.{base,c++,chill}/configure.in: changed so
	  *-*-vxworks* matches vxworks and *-*-netware* matches NetWare.

Sun Feb 12 08:11:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing
	floats, chars, and shorts where there are ANSI-style function
	definitions.

	* gdb.base/langs.exp, gdb.base/langs*: New test.
	* gdb.base/Makefile.in: Build it.
	* TODO: Remove item about checking that C names don't get C++
	demangling applied; this test tests it.

Thu Feb  9 12:43:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/weird.exp: Remove "Haven't examined" comment which
	went with the const70 xfail.  The xfail went away a year ago.

	* gdb.base/signals.exp: Rename a bunch of tests to give unique names.

	* gdb.base/corefile.exp: Give backtrace test unique name.  xfail
	for hp300.

	* gdb.base/interrupt.exp: Also xfail hpux (for hp300).

	* gdb.base/a1-selftest.exp: Don't run on hp300.

Sat Feb  4 15:04:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Makefile.in (site.exp): Set host_alias and target_alias as well
	as host_triplet and target_triplet.

Wed Feb  1 08:03:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/a1-selftest.exp: Invoke stty before starting inferior.

	* gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same
	places as other ecoff systems).

	* gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on
	ultrix.

Mon Jan 30 11:44:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't
	remove them.
	* gdb.base/nodebug.exp: Accept "function" in addition to "text
	variable and "variable" in addition to "data variable".
	* gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX.

	* gdb.base/list.exp (test_forward_search): Set listsize to 4 not
	2.
	* gdb.base/list1.c (long_line): Add additional statement at start
	of function.
	* gdb.base/list.exp (test_forward_search): Update line number to
	reflect new statement.

Sun Jan 29 13:34:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/signals.exp:  Reinitialize searched source directories
	after gdb_start call.

Sat Jan 28 01:34:44 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/Makefile.in (clean): Delete "errs" file.
	* gdb.stabs/Makefile.in: Likewise.

	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last
	change.  Instead split the tests into smaller pieces.
	* gdb.disasm/hppa.s: Corresponding changes.

Fri Jan 27 09:24:51 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
	Quote ^C when passing it to stty.  For some shells ^ is a pipe.

	* gdb.base/funcargs.exp: Modify many tests so that every test
	either passes or fails.  Make some test names unique.

Thu Jan 26 19:20:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
	Call stty to set interrupt character.

	* gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check
	for HP assembler versus GNU assembler based on actual behavior of
	$(CC), rather than assuming that $(AS) is always the GNU assembler.

	* TODO: Suggest a few more stepping tests.

Wed Jan 25 14:52:41 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/default.exp: xfail no-stack backtraces for h8300,
	restart GDB for h8300 after a continue.
	(return): Add pattern to match a29k-udi behavior.
	* gdb.base/nodebug.exp: Remove obsolete comment.
	* gdb.base/regs.exp: New file, testing of register displays.
	* gdb.base/return.exp: Fix typo in reference to $objdir.
	* gdb.base/whatis.exp: Always start with a fresh GDB.

Wed Jan 25 11:12:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout
	higher, these tests generate a lot of output.

Tue Jan 24 07:58:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp (gdb_test): Remove catch from around the send.  The
	code following the catch silently ignored some errors; without the
	catch they should be thrown like any other tcl error.  Also, the
	catch used "" instead of {} which meant all the callers who wanted
	to include one of the characters "[]$ had to quote it an extra time.
	* gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp,
	ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp,
	demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp:
	Remove extra quoting.

Mon Jan 23 21:57:54 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/commands.exp: Make test names unique; every test either
	passes or fails.  Update some comments.

	* gdb.disasm/hppa.exp (do_system_control_tests): Update.

Sat Jan 21 15:34:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	The following fixes a FAIL caused by the fact that the alpha stabs
	configuration didn't use the ".if alpha" code in weird.def.
	* gdb.stabs/weird.def (v_comb): Use type attribute to specify 32
	bit pointer, so the 32 bit version works even on the alpha.
	* gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}:
	Remove the stuff which allowed us to have separate versions for
	alpha and everything else.

	* gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix
	regexp which "info func operator\[\](" is supposed to match.  Fix
	string to send to GDB.  Note that GDB still doesn't work right.  Add a
	new test for "info func .perator\[\](" which GDB does handle correctly.

	* gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems.

Fri Jan 20 12:14:23 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp,
	gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp,
	gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp,
	gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff;
	it makes the tests harder to understand and confuses test-o-matic.
	The preferred style is that each test provides a PASS or a FAIL,
	and has a unique message (e.g. "continue #54" not just "continue")
	which is the same for the pass and the fail.
	* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
	gdb.chill/chexp.exp: Move test_print_accept and test_print_reject
	to lib/gdb.exp.
	* gdb.base/printcmds.exp: Use test_print_accept.  Remove
	prt_accept which was basically the same thing.  Likewise for
	test_print_reject and prt_reject.
	* lib/gdb.exp (test_print_reject): Add some more error message
	patterns to match from the former printcmds.exp (prt_reject).
	* gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails.
	One defect of the passcount stuff is that some of it failed to
	report XPASS where appropriate.
	* gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra
	stuff before and after arg in expected pattern.
	(test_paddr_operator_functions): Re-do test without print_addr_of;
	this is the only test which seems to want extra stuff there.

Tue Jan 17 10:47:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/nodebug.exp: Update new tests to reflect improved
	wording of gdb output.

	* gdb.base/nodebug.exp: Add tests to check that "print", "whatis"
	and "ptype" work on variables in files compiled without -g.
	Replaces commented out "maint print msymbol" tests.

Mon Jan 16 12:13:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/setvar.c (dummy): Call malloc.

	* gdb.stabs/aout.sed: Enclose comments within a sed command to avoid
	losing with the irix4 sed.

	* gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal
	ALRM" on irix4.

Sun Jan 15 21:58:26 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* TODO: Remove items about corefile.exp testing new exec-file and
	backtrace; both are now done.  Add items about printing enums.

Sat Jan 14 11:25:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/sigall.exp (test_one_sig): Attempt to recover if
	"get signal $thissig" test fails.

	* gdb.base/setvar.exp: Check for and reject crazy expected type hacks.

Thu Jan 12 01:14:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid
	compiler warning with dec alpha compiler.

	* gdb.base/commands.exp (if_while_breakpoint_command_test): Remove
	extra \n from gdb_test call (this explains why the prompt test
	that I removed yesterday was there).
	(user_defined_command_test): Remove extra \n and prompt test.

	* gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST
	doesn't exist.  Likewise if SIGIO == SIGPOLL, pretend SIGPOLL
	doesn't exist.
	* gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL.
	Also remove alpha workaround, which turns out to be because
	SIGABRT == SIGLOST.

	* gdb.base/sigall.exp: Add workaround for alpha weirdness.

	* gdb.base/help.exp: Don't test "help show".

Wed Jan 11 14:37:04 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/commands.exp: Call gdb_exit and gdb_start so that
	"set print address" is on.
	* gdb.base/commands.exp (if_while_breakpoint_command_test): Don't
	pass prompt to gdb_test; gdb_test already looks for the prompt.

	* gdb.base/help.exp: Replace most of docstring for "define" with ".*".

	* gdb.base/a1-selftest.exp: Don't test "maint dump-me".  That test
	was a vestige of the manual TESTSTRATEGY, and the purpose of it
	was to make sure that gdb can read a core file.  But (a) the "read
	the corefile" part didn't make it to a1-selftest.exp, we just
	delete the corefile after creating it, and (b) we test reading
	corefiles in corefile.exp anyway.  Also, this test left around a
	xgdb process on Solaris.

	* gdb.base/corefile.exp: Also test backtrace.

Wed Jan 11 00:14:40 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/commands.exp: Test a simple user defined command with
	arguments and if/while statements; verify the full user command is
	printed by "show user".

	* gdb.base/commands.exp: Test if/while commands as part of a
	breakpoint command list; verify they appear in breakpoint
	information.

Wed Jan 11 00:47:58 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather
	than by dividing by zero.

Tue Jan 10 21:38:05 1995  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems
	performing an inferior call with watchpoints enabled.
	* gdb.base/watchpoint.c (main): Delete second unnecessary read
	call.

Tue Jan 10 18:42:07 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo
	of "file" command.

	* gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo):
	Add additional pattern for when "int operator int(void);" appears
	in a different order.

Mon Jan  9 16:22:46 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

	* gdb.base/signals.exp: Call gdb_exit and gdb_start.

	* gdb.base/help.exp: Replace most of docstrings for "info signals"
	and "signal" with ".*".

Wed Jan  4 11:35:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add note about "handle all nostop".

	* gdb.base/{sigall.c, sigall.exp}: New test.
	* gdb.base/Makefile.in: Add it.

Thu Jan  5 17:34:03 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument
	when invoking GDB, suppresses any windowing interface.

Mon Jan  2 17:40:21 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* config/sim-gdb: New file, simulator testing support.

Wed Dec 28 12:21:50 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/interrupt.exp: Test calling func1 twice.

Wed Dec 21 12:51:37 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>

	* gdb.base/list.exp (test_forward_search): Set timeout higher
	when we'll be getting lots of output from gdb.

	* gdb.base/a1-selftest.exp: Move code that was inside expect -re
	"init_malloc" to after the expect statement.  Run it if that
	regexp is taken, but also for two others which happen if source
	cannot be found.

Tue Dec 20 12:35:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/printcmds.exp: New test, for printing register before
	program is running.

Mon Dec 19 00:32:55 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/list.exp:  Correct some alternate expect patterns
	to reflect changes in list1.c.

Sat Dec 17 14:20:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add item regarding large frames.

	* gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test.

	* TODO: Remove item about enabling return.exp; it
	is enabled.  Suggest a few more "return" tests.

Sat Dec 17 02:33:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.c++/misc.cc, gdb.c++/inherit.exp:  Add testcases for
	anonymous unions.

Tue Dec 13 11:26:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o
	and pr-5646.o, so "make" is the same as "make all", not "make
	pr-4975.o".

Wed Dec  7 19:02:02 1994  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/list.exp: Adjust expectations to reflect changes in
	list1.c.
	(test_forward_search): New test proc.
	* gdb.base/list1.c (long_line): New function, has long source line.

Thu Dec  1 23:14:49 1994  Stan Shebs  <shebs@andros.cygnus.com>

	* gdb.base/a1-selftest.exp: Change initial stepping to know about
	additional line of code that was added.

Wed Nov 30 19:43:14 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.s: Break the large branching tests into smaller
	tests so as not to overflow expect's input buffers.
	* gdb.disasm/hppa.exp: Corresponding changes.

Fri Nov 25 13:37:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	Beginnings of template debugging tests.
	* gdb.c++/templ-info.cc:  New file to test for template
	debugging capability of the compiler.
	* gdb.c++/Makefile.in:  Add rule to build templ-info.exp from
	templ-info.cc.
	* gdb.c++/templates.cc:  Add explicit template instantiations
	to enable compiling with -fno-implicit-templates. Add destructor
	and 'value' method to T5 class for template tests.
	* gdb.c++/templates.exp:  Add testcases for printing of template
	types, setting breakpoints on template methods and calling a
	template method. 

Sat Nov  5 00:20:17 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the
	branch target since some assemblers (gas-2.5)  may emit a
	relocation for the branch instead of resolving it in the
	assembler.

Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/a1-selftest.exp:  Remove RS/6000 xfail for backtrace
	through signal handler.

Fri Oct 21 11:10:16 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* configure.in (*-*-netware): Use config/mt-netware.

	* config/mt-netware: New file.
	* config/mt-i386-netware: Removed, separate configs for different
	  netware architectures are no longer needed now that we have
	  --with-headers.

Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/exprs.exp:  Remove xfail for alpha, it is fixed
	by the recent changes to use ANSI C arithmetic conversions.

Sun Oct  9 07:44:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache
	bug involving using inferior_pid to figure out whether to select a
	frame.

Wed Sep 28 23:12:02 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to
	match the current disassembler output.

Fri Sep 16 11:42:41 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* gdb.fortran/exprs.exp: Expect VOID instead of void.
	* gdb.fortran/types.exp: Escape the expected '*'s in Fortran
	types, expect "int" as type of integer values (for now).

Wed Sep  7 23:33:51 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/commands.exp: New tests for if/while commands.

Tue Sep  6 13:16:11 1994  Per Bothner  (bothner@kalessin.cygnus.com)

	* lib/gdb.exp (runto):  Replace sub-pattern for hex value
	by .*, since hex values have different syntax in Chill mode.

Tue Sep  6 02:15:51 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.c++/demangle.exp (test_arm_style_demangling):  Remove
	linefeed from expect pattern for repeated types with indices > 9.

Mon Aug 29 14:20:44 1994  Stan Shebs  (shebs@andros.cygnus.com)

	First part of Fortran test suite.
	* gdb.fortran: New directory.
	* gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files.

Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/default.exp:  Update expect pattern for load command
	without arguments.

Wed Aug 24 13:15:02 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* configure.in: Change i386 to i[345]86.
	* gdb.base/configure.in: Likewise.
	* gdb.c++/configure.in: Likewise.
	* gdb.chill/configure.in: Likewise.

Tue Aug 23 19:14:06 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* lib/gdb.exp (gdb_run_cmd): Move comment out from between expect
	patterns, since that is not a valid context for comments.

Fri Aug 19 15:07:30 1994  Kung Hsu  (kung@mexican.cygnus.com)

	* gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for
	repeated types and repeated types with indices > 9.

Tue Aug 16 15:57:52 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with
	2417; old bug has been fixed.

Fri Aug 12 19:35:41 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/interrupt.exp: When trying to wake up the inferior,
	send the newline ourselves instead of assuming gdb_test will do
	so when passed an empty input string.

	* gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the
	stabs testcode.

Fri Aug  5 17:01:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* lib/gdb.exp (gdb_test): Don't send anything if the first
	  argument is an empty string.  This makes cases where we want to
	  match output that is already in expect's buffers (for example,
	  matching a breakpoint after gdb_run_cmd has been called) work
	  reliably.

Tue Aug  2 10:24:08 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* config/netware.exp: New file.

Thu Jul 28 12:54:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* config/mt-slite (LDFLAGS): If using the newlib in the tree, set
	  the -B and -L prefixes so we can find the debugging stub.

	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
	  there and we are using the gcc from the tree.

	* gdb.base/types.c: Removed.

	* gdb.base/configure.in: Look for makefile fragments in ../config.
	  Recognize i386-*-netware.
	* gdb.c++/configure.in: Likewise.

Mon Jul 25 23:48:50 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/corefile.exp:  Change `else if' to `elseif', which is
	the correct TCL syntax.

Mon Jul 25 15:35:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* gdb.base/opaque.exp: use runto instead of messing around with
	  breakpoints.  Simplify by using gdb_test.

	* gdb.base/bitfields.exp: restart between tests on netware targets
	  because breakpoints aren't relocated after target death.  Run
	  processes to completion.

	* gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd.

Sun Jul 24 09:55:51 1994  Fred Fish  (fnf@cygnus.com)

	* Makefile.in:  Remove extra tabs that confuse some versions
	of "make".  Use the newly built gdb to test with by default,
	rather than the first one in the tester's search path.

Sat Jul 23 15:05:47 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* gdb.base/whatis.exp (v_signed_short_array): Fix a typo.

	* gdb.base/help.exp: Update expected add-symbol-file, ignore, and
	condition help.

Tue Jul 19 10:26:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd.

	* lib/gdb.exp (gdb_run_cmd): New function, used to start program
	  running.
	* gdb.base/bitfields.exp: Use gdb_run_cmd to start program.
	* gdb.base/funcargs.exp: Likewise.

	* gdb.base/bitfields.exp: Simplify by using gdb_test.
	* gdb.base/funcargs.exp: Likewise.

	* lib/gdb.exp (gdb_test): if match times out, don't call fail if
	  message is "".

Mon Jul 18 12:18:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug,
	  return,signals,twice}.exp: Handle non-existant binaries
	  consistantly.

	* gdb.base/corefile.exp: Execute coremaker to generate core dump.
	* gdb.base/Makefile.in: Don't try to generate a core dump, we
	  might testing a cross development system.

Thu Jul 14 18:13:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the
	  runtest script is relative to ${srcdir}, not ${rootdir}.

Thu Jul 14 14:56:59 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* gdb.base/signals.exp: Allow for optionality of breakpoint
	address.

Thu Jul 14 11:21:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.base/{ptype.exp,ptype.c}: Add t_char_array test.

Tue Jul 12 12:22:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

	* gdb.c++/cplusfuncs.cc: Include <stddef.h>, not <sys/types.h>,
	  for size_t definition.
	* gdb.c++/templates.cc: Likewise

	* config/mt-i386-netware: New file.

	* gdb.base/interrupt.c: Do not test if errno == EINTR if it's not
	  defined.

	* gdb.base/Makefile.in: Added support for systems that name core
	  files by appending "core" to the program name.
	* gdb.base/a1-selftest.exp: Likewise.

Mon Jul 11 23:59:18 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/return.exp:  Add comment and message for `return double'
	test failure on Sparc Solaris.

Mon Jul  4 12:10:48 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* lib/gdb.exp (runto): Allow for optionality of breakpoint address.

Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.c++/misc.cc:  Instantiate classes to inhibit the compiler
	from optimizing them away.
	* gdb.c++/classes.exp, gdb.c++/inherit.exp:  Update ptype expect
	patterns to include default constructors and assignment operators,
	to match gcc versions beyond 2.5.8. Accept any cplus demangling
	character in the output of the virtual base pointer.

Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.c++/cplusfuncs.exp:  Use string_to_regexp and a regular
	expression match in print_addr_of to avoid unintented matches.
	* gdb.c++/virtfunc.exp:  Accept alternate ptype output of g++
	versions up to 2.5.8.

Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.base/list.exp:  Tweak alternate pattern for listing of an
	included file to run under newer versions of expect.
	* gdb.c++/demangle.exp:  Add spaces to the expect patterns between
	consecutive >'s in templates to accomodate recent cplus-dem.c change.
	Remove xfail for the virtual table of BDDHookV.

Sat Jun 18 12:51:34 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* lib/gdb.exp (string_to_regexp): Set a default result.
	(default_gdb_start): Fix misleading message.

Wed Jun 15 12:10:10 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout:
	Remove all CC, etc definitions.
	* config/mt-hpux: New file.
	* config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove:
	(CFLAGS, LDFLAGS): Define.
	* config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS.

	* Makefile.in (site.exp): Don't insert host_os, etc.
	(just-check): Just use RUNTEST with RUNTESTFLAGS only.
	(distclean): Check existence of subdir.
	* gdb.base/configure.in (hppa*-*-hpux*): Recognize.
	* gdb.base/Makefile.in: General cleanup and simplification.
	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
	to build executables.	Use default rule to build .o files.
	(EXPECT, RUNTEST, CC): Fix relative pathname.
	(site.exp): Don't insert host_os, etc.
	* gdb.base/signals.c (main): Don't call signal unless SIGALRM
	and/or SIGUSR1 defined.
	* gdb.base/watchpoint.c: Don't include stdio.h a second time.
	* gdb.c++/Makefile.in: General cleanup and simplification.
	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
	(CFLAGS): Remove.
	(EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname.

Fri Jun 10 10:55:09 1994  Jeff Law  (law@snake.cs.utah.edu)

	* gdb.base/recurse.exp: Misc changes to get tests running again
	after Kung's changes to the watchpoint code.
	* gdb.base/watchpoint.exp: Likewise.

Thu Jun  9 15:16:55 1994  Per Bothner  (bothner@kalessin.cygnus.com)

	* lib/gdb.exp (string_to_regexp):  Convert {\} also.

Wed Jun  8 12:12:17 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start.
	* lib/gdb.exp (default_gdb_start): Define.
	* gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp,
	gdb.base/funcargs.exp, gdb.base/opaque.exp,
	gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp,
	gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp,
	gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp:
	Don't call gdb_target_udi in between tests.

Tue Jun  7 08:30:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle
	(which was basically just a local version of the same thing).  In
	addition to avoiding duplication, gdb_test_exact is faster.
	* lib/gdb.exp (gdb_test_exact): Fix typo.

	* lib/gdb.exp (delete_breakpoints): If there were no breakpoints,
	don't give an error.

	* gdb.base/term.exp: Call delete_breakpoints before starting.

	* gdb.base/Makefile.in (EXECUTABLES): Remove t10.
	(t10): Add comment.

Mon Jun  6 18:26:50 1994  Stan Shebs  (shebs@andros.cygnus.com)

	Reorganization of the GDB Test Suite.

	* gdb.base: New directory, contains all the basic tests.
	* gdb.c++: New directory, tests specific to C++.
	* gdb.chill: New directory, tests specific to Chill.
	* gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06,
	gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13,
	gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23,
	gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved
	into appropriate new directories (t00-t17 to base, t20-t23 to c++,
	t30-31 to chill).
	* */gdbme.*: Rename to match appropriate expect scripts.
	* gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c,
	gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c,
	gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h,
	gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c,
	gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c,
	gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c,
	gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c,
	gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c,
	gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c,
	gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files.
	* gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc,
	gdb.c++/virtfunc.cc: New names of C++ files.
	* gdb.chill/chillvars.ch: New name of Chill file.
	* gdb.base/configure.in, gdb.c++/configure.in,
	gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in.
	* gdb.base/Makefile.in, gdb.c++/Makefile.in,
	gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in.
	* configure.in (configdirs): Update to reflect directory changes.
	(target_abbrev): No longer define for any configuration.
	* Makefile.in: Cosmetic improvements to header comments.

Fri Jun  3 18:56:06 1994  Per Bothner  (bothner@kalessin.cygnus.com)

	Various changes to gdb.t31:

	* Makefile.in (gdbme.o):  Compile with -fspecial_UC.
	* gdbme.ch:  Make all key-words and predefineds be upper-case.
	* chillvars.exp:  Expect key-words and predefinds in upper-case.

	* chillvars.exp:  Use gdb_test_exact many places.
	Change expected output for arrays (which now includes index labels).

	* pr-5020.exp, gdme.ch (module PR_5020):
	New test, for PR-5020.

Thu Jun  2 16:02:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)

	* lib/gdb.exp (string_to_regexp, gdb_test_exact):  New procedures.
	* Makefile.in (CHILL_LIB):  Remove bogus redundant definitions.

Sun May 29 22:31:42 1994  Per Bothner  (bothner@kalessin.cygnus.com)

	* Makefile.in:  Fix bit-rot in definitions of CHILL,
	CHILL_FOR_TARGET and Chill_LIB.
	* gdb.t31/gdbme.ch:  Fix syntax of nested array tuples.
	* gdb.t31/Makefile.in:  Add definitions for CHILLFLAGS,
	CHILL, and CHILL_LIB.

Sat May 21 10:05:08 1994  Bill Cox  (bill@rtl.cygnus.com)

	* Revert the previous changes.  Please see Rob's directory
	  /lisa/test/rob/progressive/gdb/testsuite for these fixes.

Thu May 19 12:51:00 1994  Bill Cox  (bill@rtl.cygnus.com)

	* Makefile.in, configure.in, config/mips-gdb.exp,
          config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
          config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
          config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
	  gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
	  gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
	  gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
	  gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
	  gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
	  gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
	  gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
	  gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
	  gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
	  gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
	  gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
	  gdb.t24/demangle.exp, lib/gdb.exp:  Check in Rob's testing
	  changes from 94Q1.

Wed May 18 17:04:03 1994  Bill Cox  (bill@rtl.cygnus.com),

	* config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
	  config/mt-slite, config/mt-unix, config/mt-vxworks: Add
	  Rob's new testing fragments.

Tue May 17 15:04:14 1994  Bill Cox  (bill@rtl.cygnus.com)

	* config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp,
          lib/gdb.exp: Replace error proc calls with perror.

Mon May 16 19:00:50 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the
	version also, match on casted version strings, and match on
	gdb startup case where the line numbers might be messed up.

Fri May 13 18:00:27 1994  Bill Cox  (bill@rtl.cygnus.com)

	* config/mt-i960-vx (LDFLAGS): Add '-r' option for test links.
          (CFLAGS): Delete it from here.

Tue May  3 16:08:09 1994  Kung Hsu  (kung@mexican.cygnus.com)

	* gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs.

Fri Apr 29 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* Makefile.in (RUNTEST): Default to just "runtest".

Tue Apr 26 22:21:40 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t17/callfuncs.exp: More comments about t_func_values tests.
	* gdb.t17/gdbme.c (t_func_values): Add comments about how and why
	the code has been restructured.

Thu Apr 21 12:48:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/default.exp (set write): Allow any number of \r and/or
	\n, not just one of each.

	* gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4
	/bin/cc gives a warning if you do.

Thu Apr 21 11:54:04 1994  Kung Hsu  (kung@mexican.cygnus.com)

	* gdb.t24/demangle.exp: change expect pattern of 
	__t10ListS_link1ZUiRCUiPT0

Wed Apr 13 15:05:00 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints
	on local variables in recursive functions.

	* gdb.t07/Makefile.in: Build the new test.

Tue Apr 12 20:45:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t17/gdbme.c (t_func_values): Do not compare function pointers
	directly.  Instead compare the return values from actual calls.

Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)

	* Makefile.in (check): Set TCL_LIBRARY for runtest.

Mon Apr 11 09:15:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* From Peter Schauer with minor modifications.
        * gdb.t15/return.exp (return_tests): Handle targets where "return"
        stops in mid-line in the caller.  Add xfail for returning a float
        value on X86 targets.

Tue Apr  5 15:16:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves
	to avoid expect lossage.
	(fmem_LRbug_tests): Likewise.
	* gdb.disasm/hppa.s: Corresponding changes.

	* gdb.disasm/hppa.exp: Rework escape sequences and end-of-line
	conditions to work with latest dejagnu/expect.

	* gdb.t15/funcargs.exp (finish from indirect call): No longer
	expected to fail on the PA.
	(backtrace in call with trampolines): Explicitly require main
	to be frame #1 (no trampolines should show up in backtrace).

	* gdb.t00/default.exp: Use "exp_continue" rather than obsolete
	"continue -expect".
	* gdb.t06/break.exp: Likewise.
	* gdb.t07/watchpoint.exp: Likewise.
	* gdb.t13/bitfields.exp: Likewise.
	* gdb.t15/{funcargs,return}.exp: Likewise.
	* gdb.stabs/weird.exp: Likewise.
	* config/{mips,udi}-gdb.exp: Likewise.

	* hppa.sed: Enclose comments within a sed command to avoid
	losing with the old OSF1 sed.

Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t02/whatis.exp, gdb.t08/opaque.exp:  Add XFAILs for
	sequent dynix.
	* gdb.t06/signals.exp:  Add clear_xfail for sequent dynix.
	* gdb.t15/funcargs.exp:  Conditionally step again to really
	finish from marker_call_with_trampolines. Handle the case where
	the first step from within call_with_trampolines already steps
	us back to main.
	* gdb.t15/gdbme.c:  Add comment to closing brace of
	call_with_trampolines for funcargs.exp.

Tue Mar 29 23:55:27 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): 
	Fix typo(s).

Sun Mar 27 16:53:14 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t07/gdbme.c: More code for watchpoint testing.

	* gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
	"Hardware watchpoint" throughout file.
	(test_watchpoint_triggered_in_syscall): New test.
	(test_complex_watchpoint): New test.

Fri Mar 25 17:05:31 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdbme.c (call_with_trampolines): New function to try and step
	into.  Tests trampoline problems on the PA.

	* funcargs.exp (localvars_in_indirect_call): No longer expect
	stepping into indirect call to fail on PAs.
	(test_stepping_over_trampolines): New test.

Wed Mar 23 07:43:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestions for static member function tests, and
	completion tests.

Wed Mar 16 08:28:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestions for "p/a" tests.

	* lib/gdb.exp: Set prompt to (gdb) if it isn't already set.
	(default_gdb_exit): Replace all the hair with sending "quit" to
	the process with a simple close.

Tue Mar 15 08:45:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestions for shared library tests.

Sun Mar 13 10:45:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestions for x/s tests.

Fri Mar 11 08:22:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/help.exp: Replace most of docstrings for "tbreak",
	"enable once", and "enable breakpoints once" with ".*".

Thu Mar 10 08:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestions about structure passing tests.

Mon Mar  7 13:45:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t03/gdbme.c:  gcc version 1 puts out the wrong stabs for
	the primary1 test, use work around if __GNUC__ < 2.
	* gdb.t06/signals.c:  Add comments for signals.exp pattern matching.
	* gdb.t06/signals.exp:  Add XFAILs for i386 bsd and vax ultrix.
	Test for bad output rather than waiting for timeout.  Issue
	second continue only if first continue failed.

Wed Mar  2 10:08:01 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do
	operator[] test with gdb_test because the old code didn't seem to
	be getting the quoting right with the new dejagnu.

Thu Feb 24 19:49:25 1994  Rob Savoye  (rob@poseidon.cygnus.com)

	* lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
	one from the path.
	* Makefile.in: Use a fresh expect if there is one, use runtest
	from the src tree if there is one.
  
Thu Feb 24 18:49:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
	next over recursive call.  Revise the tests from that point on
	(which had been skipped) to match GDB's actual (correct) output.

	* gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug
	with next over a breakpoint whose condition is false.

	* gdb.t00/help.exp: Comment out "help set print" tests just like
	(and for same reason as) "help set" test.

Mon Feb 14 09:58:23 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.s (fmemLRbug_tests): New tests.
	* gdb.disasm/hppa.exp (fmemLRbug_tests): Run them.

Sun Feb  6 15:36:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/break.exp (test_next_with_recursion): Remove no longer
	necessary gdb_target_udi.

	* gdb.t03/ptype.exp: For UDI, skip tests which call malloc.

	* gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs
	1838 and 2417; they are fixed.

	* gdb.t02/whatis.exp (v_char_array, v_signed_char_array),
	gdb.t03/ptype.exp (ptype structure, ptype union):
	Remove xfails; the test is looser than when the xfails were added.

	* gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI.
	* gdb.t00/help.exp: Don't expect remote to be in "help target" output.

	* gdb.t01/run.exp: Only run shell test if isnative.

	* config/udi-gdb.exp (gdb_load): Use "file", not "load" command,
	since "run" automatically loads if necessary.  Call gdb_target_udi
	after the "file" since "file" kills any execution target.

	* config/udi-gdb.exp (gdb_start): Don't send "set args main" to
	GDB.  GDB doesn't work that way (not anymore at least) on UDI.
	* gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first
	argument for UDI.

Fri Feb  4 12:19:32 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* gdb.t17/interrupt.c: If we get EINTR, don't print an error message.

	* gdb.t17/callfuncs.exp: Add xfails for rs6000.

Sat Feb  5 09:11:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Re-write demangle to just call gdb_test,
	properly quoting regexps.  This makes the second argument to
	demangle a fixed string, which matches the callers, instead of a
	shell-style pattern which is what the previous implementation
	used.  Update some of the callers.

Sat Feb  5 10:19:09 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.s (comib_tests): Add missing instruction.
	(comib_nullified_tests): Fix typo.
	* gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect
	strings.  No longer expected to fail.

	* gdb.disasm/hppa.s (addib_tests): Fix typo.
	* gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect
	strings.  No longer expected to fail.

	* gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect
	string.  No longer expected to fail.

Fri Feb  4 23:45:11 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string.
	No longer expected to fail.

	* gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect
	string.  No longer expected to fail.

Fri Feb  4 10:35:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Remove a bunch more tests which differ
	only in the names (I probably got most of them).  I was even
	generous with some which differed in underscores in names, and
	probably missed a few, and I *still* was able to remove almost a
	third of the file with almost no impact on testsuite coverage.

Thu Feb  3 12:04:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/default.exp: Match udi_attach error message as well as
	the one from child_attach.

	* gdb.t00/default.exp: Use "." instead of "?" to match a question mark.

	* gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB.

	* gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8.
	* gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it.

	* Move test with enums and partial symbols back to
	gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}.
	Reverts the change of 26 May 93.  Per today's change to
	stabs.texinfo, the behavior that weird.exp was expecting was
	unreasonable; what is important is that the compiler+gdb get
	things right, which happens with a recent gcc.  Also fix the test
	to deal with native compilers which put out the stab gdb can't
	deal with.

Mon Jan 31 15:40:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Remove a bunch of tests which differ only
	in the names.  The main thing these accomplish is to slow things down.
	Many more such duplicates surely remain.

	* gdb.t00/help.exp: Comment out "help support" test just like
	(and for same reason as) "help set" test.

Mon Jan 31 06:43:45 1994  Fred Fish  (fnf@cygnus.com)

	* gdb.t06/break.exp:  Remove setup_xfails for
	sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb.
	* gdb.t20/inherit.exp (test_ptype_si):  Update warning message
	about known bug in gcc to include up through 2.5.8.
	* gdb.t20/inherit.exp (test_ptype_vi):  Accept "_vb." as well as
	well as "_vb$".
	* gdb.t21/cplusfuncs.exp (test_lookup_operator_functions):
	Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass
	with latest gcc and gdb.
	* gdb.t22/virtfunc.exp (test_ptype_of_classes):  Accept "_vb." as
	well as "_vb$".

Sat Jan 29 23:31:26 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* configure.in (hppa*-*-*): Also configure and build stabs-only
	tests.

Thu Jan 27 08:21:16 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.t10/hppa.mt: A makefile fragment for the PA.
	* gdb.t10/configure.in (hppa*-*-*): Use it.

Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t09/corefile:  Increase timeout when spawning gdb explicitly.

Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t06/signals.exp:  Handle blocked SIGTRAP on sun3 for bash
	versions prior to 1.13.5.

Tue Jan 18 20:10:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/default.exp (show prompt): In FAIL case, only match if
	the prompt is at the start of a line.

Mon Jan 17 20:07:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.disasm/hppa.s: Add new tests for sfu and copr instructions.
	Enable "diag" instruction.  Delete copr from fpu_misc_tests, it's
	in the copr tests now.
	* gdb.disasm/hppa.exp: Run new sfu and copr tests.  Do not expect
	copr in the fpu_misc tests anymore.  fpu_misc tests are no longer
	expected to fail.

Fri Jan 14 14:24:21 1994  Rob Savoye  (rob@darkstar.cygnus.com)

	* gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp,
	gdb.t31/chillvars.exp, lib/gdb.exp:
	Tweak to run under either version of expect.
	* lib/gdb.exp (default_gdb_exit): Remove "catch" statement.
	* gdb.t00/teststrategy.exp: Use isnative and verbose procedures.
	* gdb.t11/list.exp: Remove extraneous whitespace.

Sat Jan 15 09:57:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t16/printcmds.exp (test_print_strings): Accept
	"(unsigned char *) " before the string.

	* TODO: Add notes about printing of fancy types and GDB expressions.

Thu Jan 13 17:16:09 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* Makefile.in: Pass LDFLAGS and LIBS to sub-makes.
	* gdb.t06/configure.in: Don't try to compile signals test program
	if doing mips-idt-ecoff.	

Thu Jan 13 08:25:55 1994  Rob Savoye  (rob@darkstar.cygnus.com)

	* Most .exp files: Tweak to run under either version of expect.

Tue Jan 11 15:21:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t12/scope.exp: Add xfails for rs6000.  Remove 1806 from existing
	xfails; I'm not sure why they are failing, but not because of PR 1806.

Mon Jan 10 22:14:20 1994  Rob Savoye  (rob@darkstar.cygnus.com)

	* config/unix-gdb.exp: Remove gdb_unload cause it's already
	defined in lib/gdb.exp.

Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t07/watchpoint.exp:  Clear xfail for calling function with
	watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined.
	* gdb.t20/gdbme.cc, gdb.t21/gdbme.cc:  Conversion operator functions
	have to be typeless.

Tue Jan  4 09:32:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: Add suggestion for copyright year test.

Mon Jan  3 11:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* configure.in (*-*-lynxos*): Add stabs tests.

Wed Dec  1 21:54:05 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.stabs/hppa.sed: Only lables should ever start in column zero,
	so insert a tab before any assembler directive in column zero.

	* gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword
	stores.
	* gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword
	stores.
	(fpu_short_memory_tests): Likewise.

Mon Nov 22 13:23:22 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.stabs/ecoff.mt:  Delete alpha specific if block, fix typo.
	* gdb.stabs/ecoff.sed:  Escape inserted blanks with backslashes, embed
	.stabs directives in comments.

Fri Nov 19 14:09:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* TODO: New file, describing tests we could write.
	* gdb.t09/corefile.exp: Move description of tests to write to TODO.

Tue Nov 16 21:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.exp: Add kludge to force re-sync.

	* gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me"
	to xgdb instead of gdb, get out of gdb.

Tue Nov 16 10:21:57 1993  Rob Savoye  (rob@cygnus.com)

	* lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work
	for info.

Sat Nov 13 23:17:48 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* gdb.stabs/hppa.mt: A makefile fragment for the PA.
	* gdb.stabs/configure.in (hppa*-*-*): Use it.
	* gdb.stabs/hppa.sed: New sed script for the PA.

Sat Nov 13 22:50:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs: Re-write weird.def and configuration to use sed
	instead of cpp.  sed is portable and POSIX; cpp is neither.

Fri Nov 12 15:26:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed.

Mon Nov  8 16:55:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t20/gdbme.cc: Add comment about pmi being optimized out.

Thu Nov  4 23:07:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as
	"_vb$".
	* gdb.t00/teststrategy.exp: Add xfail for RS/6000.
	* gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc.

Wed Nov  3 13:53:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* lib/gdb.exp: Comment out code which depends on non-existent
	`transform' procedure.

Wed Nov  3 11:23:11 1993  Rob Savoye  (rob@darkstar.cygnus.com)

	* lib/gdb.exp (default_gdb_exit): Remove `catch "close"'.
	* lib/gdb.exp: Transform tool name.
	* gdb.t*/*.exp: Change error to perror so it works with DejaGnu
	1.1's new error handling system.

Mon Nov  1 10:36:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS.

Fri Oct 29 17:58:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/default.exp: Avoid tests with a lot of .* in them.
	They made pattern matching so slow that timeouts happened on
	heavily loaded systems.  Now any output from "show print" which
	gets us back to the GDB prompt is a PASS.

Mon Oct 25 14:36:50 1993  Stu Grossman  (grossman at cygnus.com)

	* gdb.disasm/hppa.mt:  Use $(srcdir) in hppa.o make rule.

Mon Oct 25 13:35:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.exp: Skip whole file with xfail for HPPA.

	* gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail.
	It is not from PR 3220.

Sun Oct 24 18:49:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which
	just started failing because they depended on the order the
	subcommands are presented, or exact docstring text.  This kind of
	test is a pain and has minimal benefit.

Thu Oct 21 08:26:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t09/corefile.exp: At end of test, use "core" command with
	no arguments.

Wed Oct 20 08:56:02 1993  Stu Grossman  (grossman at cygnus.com)

	* gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16
	17}/Makefile.in:  Make it possible to run the testsuite with Sun
	make and CC = cross gcc by adding explicit build rules for .o
	files.

Tue Oct 19 14:57:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t15/funcargs.exp: Don't put comments on same line as
	setup_xfail (@#$*%& tcl braindamage!).
  
Mon Oct 18 21:50:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile.

Fri Oct 15 15:39:54 1993  Kung Hsu  (kung@cirdan.cygnus.com)

	* gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'.
	* gdb.t20/inherit.exp: remove three dumplicate entries.

Fri Oct 15 13:45:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t06/break.exp: For "next over recursive call", fail on any
	incorrect output, not just on "factorial (value=2)".

Fri Oct 15 11:52:56 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t12/scope.exp:  Remove xfails, filename::var syntax should be
	working now. Add an xfail if accesing a bss variable causes
	a memory error if the target is not yet run.

Thu Oct 14 19:16:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of
	constructor name (2 string), name of _GLOBAL_ demangling (2 strings),
	name of __st* demangling (2 strings).  Did Kung really get the
	more than 95 others right without testing them?

Thu Oct 14 16:27:08 1993  Kung Hsu  (kung@cirdan.cygnus.com)

	* gdb.t24/demangle.exp: clean up XFAILS, more than 100

Thu Oct 14 11:40:30 1993  Jeffrey Law  (law@cs.uah.edu)

	* configure.in (configdirs): Add gdb.disasm
	* gdb.disasm: New directory for GDB disassembler tests.
	* gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA.

Thu Oct 14 11:40:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/help.exp: Don't test "help set".

	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails
	from within expect statements.  None of these happen anymore and
	they cause regressions to be silently unnoticed.

	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure
	messages) about known failures with gcc cygnus-2.4.5-930417.

	* gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on
	comp-info.exp so it gets built if it doesn't exist.

	* gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff;
	it is no longer used.
	* gdb.t13/comp-info.c: Removed.

Wed Oct 13 22:54:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* gdb.t06/signals.exp: Add xfail for sun3.

Thu Oct  7 12:01:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t17/interrupt.exp: Add xfail for Irix (currently not really
	relevant because ^C doesn't get sent but failure can be reproduced
	interactively).

Tue Oct  5 10:43:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.stabs/alpha.mt:  New configuration file for alpha.
	* gdb.stabs/configure.in:  Use it.
	* gdb.stabs/ecoff.mt, weird-ecoff.sed:  Change sed script to enable
	sharing with alpha.mt, redefine long to word via preprocessor.
	* gdb.stabs/weird.def:  Conditionally adapt storage layout of v_comb
	for alpha.
	* gdb.stabs/weird.exp:  Handle compilation of weird.s by alpha
	native cc.
	* gdb.t00/teststrategy.exp:  Change expect string so that we
	consume the `(xgdb)' from the command echo and from the gdb prompt.
	* gdb.t05/expr.exp:  xfail "print unsigned int == (~0)" on the alpha.
	gdb currently compares all values as long, so this failure probably
	applies to any configuration where LONGEST is bigger than a target int.
	* gdb.t08/comp-info.c:  New file to determine if gdbme is compiled
	with gcc.
	* gdb.t08/Makefile.in, opaque.exp:  Use it. Alpha native cc is unable
	to handle opaque pointers, gcc is.
	* gdb.t21/gdbme.cc, gdb.t23/gdbme.cc:  operator new takes a size_t
	as first argument. Include <sys/types.h> and change all operator
	new definitions to use size_t.
	* gdb.t21/cplusfuncs.exp:  Handle changes in output for operator new
	now that we use size_t.

Wed Sep 29 00:55:49 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t03/ptype.exp, gdb.t15/printcmds.exp:  When constructing
	a long or float array cast all array members to the same type.
        * gdb.t04/setvar.exp:  Handle the decimal output of an unsigned long
	with 64 bit longs.
        * gdb.t07/watchpoint.exp:  Add finish and until variations encountered
	on alpha.
        * gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Add xfails for alpha.

Tue Sep 28 17:26:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24 (demangle.exp): Constructors of templates have names like
	vector<int>::vector(int) not vector<int>::vector<int>(int).  See
	section 14.6 of the ARM.

	* gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form
	"_vt$MoveCmd"; these differ only in name from "_vt$foo", so they
	accomplish little and slow down the testsuite.

	* gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
	Accept spaces various places.

Tue Sep 21 17:28:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function
	with watchpoint enabled.

	* Makefile.in: Remove definition of CC and remove the second
	definition of CXX (the "CXX = gcc" one remains).  These definitions
	were causing backquotes to be expanded within backquotes, which
	doesn't work.

Sat Sep 18 09:43:21 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)

	* gdb.t17/callfuncs.exp: Add "return 0" to end.

Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/ecoff.mt:  Remove STABSCC hack.
        * gdb.stabs/weird.exp:  Handle the case where weird.o is compiled
	by mips cc and contains no stabs entries.

Thu Sep 16 17:22:12 1993  Rob Savoye  (rob@darkstar.cygnus.com)

	* config/vx-gdb.exp: Use fake device to load files rather than
	NFS.
	* lib/gdb.exp: New proc to do "file" command.
	* config/unix-gdb.exp: Use new "file" proc.

Thu Sep 16 13:45:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* config/mips-gdb.exp (gdb_load): Increase timeout to 2400.
	Rework board rebooting slightly.
	(gdb_exit): Don't exit from the remote shell; there isn't one.
	* gdb.stabs/weird.exp: If a program is being debugged already,
	kill it.
	* gdb.t04/setvar.exp: Stop and restart gdb.
	* gdb.t05/expr.exp: Likewise.
	* gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and
	restart gdb and reload the program.
	* gdb.t08/opaque.exp: Likewise.
	* gdb.t12/scope.exp: Likewise.
	* gdb.t13/bitfields.exp: Likewise.
	* gdb.t15/funcargs.exp: Likewise.
	* gdb.t20/classes.exp: Likewise.
	* gdb.t03/ptype.exp: Increase timeout.
	* gdb.t16/printcmds.exp (test_print_string_constants,
	test_print_array_constants): Likewise.
	* gdb.t17/callfuncs.exp (do_function_calls): Likewise.
	* gdb.t20/classes.exp (do_tests): Likewise.
	* gdb.t22/virtfunc.exp (test_virtual_calls): Likewise.

Wed Sep 15 14:24:36 1993  Ian Lance Taylor  (ian@cygnus.com)

	* gdb.stabs: Renamed *wierd* to *weird*.

Wed Sep 15 10:36:50 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)

	* gdb.t13/bitfields.exp: Test for bad output rather than waiting
	for timeout.  Add "known gcc 2.4.5 bug" to failure message.

Tue Sep 14 17:16:44 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)

	* gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name.
	(do_tests): Remove xfail for whatis on one_var and two_var.

Wed Sep  8 23:14:23 1993  Rob Savoye  (rob@darkstar.cygnus.com)

	* Makefile.in: Made cross building work better by adding
	{RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS.

Tue Sep  7 14:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t15/{return.c,return.exp,Makefile.in}:
	New test, currently commented out.

Tue Aug 31 16:51:29 1993  Rob Savoye  (rob@darkstar.cygnus.com)

	* config/udi-gdb.exp: gdb_exit now kills any isstip processes
	still running and removes the leftover named socket so GDb can do
	clean restarts.

Mon Aug 30 17:55:16 1993  Rob Savoye  (rob@darkstar.cygnus.com)

	* gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the
	console, not GDB.
	* config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so
	cross testing works better with "make check"
	* config/unix-gdb: Use default procedures for exit and version.
	* config/vx-gdb.exp: Cleaned up and massaged back to working order
	with the newest VxWorks.

Thu Aug 26 17:50:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t20/classes.exp: For "ptype class Base1", continue to accept
	old form.

	* gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a
	name (e.g. devo gdb with gcc 2.4.5), it is still a pass.

	* gdb.t10/crossload.exp: Skip whole file (for now, until we fix it).

	* config/unix-gdb.exp: Remove this version of gdb_exit
	* lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp.
	Rob says he'll look at it when he gets back to testing boards.

Thu Aug 26 07:20:00 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* gdb.t22/virtfunc.exp:  Accept missing struct/class names as
	an expected fail for certain ptype commands.

	* gdb.t20/classes.exp:  Update expected results of "ptype class
	Base1" to account for the constructor that now appears in the type.

Wed Aug 25 16:48:05 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* configure.in (configdirs):  Restore gdb.t04, which mysteriously
	disappeared from list.
	* config/{udi-gdb.exp, gdb-unix.exp}:  Replace calls to obsolete
	"alldone" proc with call to cleanup and exit.
	* {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp,
	gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp,
	gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp,
	gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp,
	gdb.t12/scope.exp, gdb.t13/bitfields.exp}:  Replace calls to
	"alldone" proc with simple returns that suppress remaining
	tests.  The alldone proc went away many months ago.

Tue Aug 24 11:04:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests.

	* gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O.

Thu Aug 19 22:08:41 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t15/funcargs.exp:  Allow arguments for main in backtraces
	as vax gdb will display them.

Thu Aug 19 18:18:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t20/gdbme.cc: Do some calculation with v.x, to confound
	optimizers.

	* scope.exp: Change "bad value for localval" messages so each one
	is unique.

	* config/unix-gdb.exp (gdb_exit): Move info on this vs.
	lib/gdb.exp (gdb_exit) from ChangeLog to comments.

	* gdb.t06/signals.exp: Skip the whole file with xfail for delta68.

Tue Aug 17 00:05:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line
	doesn't exist (due to optimization).

Mon Aug 16 21:05:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/wierd.exp: Deal with it if echo of "file" command
	contains \r because the filename is long.

	* gdb.t06/signals.exp: Revise comments regarding "'next' behaved as
	'continue'" bug, and change xfail back to i*86-univel-sysv4*.

Mon Aug 16 03:05:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Update for vax running
	Ultrix.
	* gdb.t02/whatis.exp:  Use procedure to setup xfails on long versus
	int tests.
	* gdb.t08/opaque.exp:  Use procedure to setup xfails for opaque tests.

Thu Aug 12 15:24:28 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* Makefile.in (distclean):  Remove *.log *.plog *.sum *.psum site.*.

	* gdb.t17/interrupt.exp:  Fix 'missing Continuing' case so pattern
	to match does not match the passing case but still matches the 
	failing case.

Thu Aug 12 16:58:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Makefile.in (distclean): Remove *.plog *.sum *.psum site.*.

Wed Aug 11 19:47:27 1993  John Gilmore  (gnu@rtl.cygnus.com)

	* lib/gdb.exp (gdb_exit):  Move the best version of gdb_exit
	to here.  Fix 'Quit anyway.*?' bug (? is a regexp metacharacter).
	* config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}:
	Remove various versions of gdb_exit.
	* config/vx-gdb.exp:  Remove quit_vxgdb, change a caller to call
	gdb_exit.
	* config/unix-gdb.exp:  gdb_exit remains here, and should override
	the generic version, since it's doing a lot of wierd stuff that
	the other versions aren't.  FIXME, fold it in, or abandon this
	version.

Wed Aug 11 12:09:32 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Add tests for PR 3220.

Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_.

Tue Aug 10 15:45:25 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* gdb.t07/watchpoint.exp:  Clear xfail with "i*86-*-*", not just
	"i386-*-*".  Works for i486 as well.

	* gdb.t06/signals.exp:  Rework code that recognizes known SVR4
	bug, and expand domain of xfail to all SVR4 systems, since the
	actual problem is likely to be in generic SVR4 /proc support.

Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* config/unix-gdb.exp (gdb_load): Add eof to expect statement.

Tue Aug 10 09:56:56 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* gdb.t17/interrupt.exp:  Set up xfail for *-*-sysv4*, in chain of
	xfails for other systems.  Match a missing 'Continuing.' as an
	explicit fail for i*86-*-sysv4*, so it doesn't hose other tests.

	* gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp,
	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp:
	Only issue warning for missing executables if -all option is used.

	* gdb.stabs/wierd.exp:  Only issue warning for missing wierd.o
	file if -all option is used.  It's like an unpredictable XFAIL.

Mon Aug  9 10:13:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t15/funcargs.exp: Add comments that hppa xfails are only
	for dynamically linked binaries.

	* gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests.

Sun Aug  8 14:21:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t20/inherit.exp: Change message for "print tagless struct"
	to state that this is a known bug in old versions of g++.

Fri Aug  6 21:40:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t17/interrupt.exp:  Add xfail for 386 bsd. Accept echoed newline
	while waiting for `Continuing'.

Fri Aug  6 13:38:08 1993  Fred Fish  (fnf@deneb.cygnus.com)

	* gdb.t10/nodebug.exp:  Expect to find local/global minimal symbols
	in text, data, and bss.
	* gdb.t10/nodebug.c:  Add local and global test variables for
	initialized and uninitialized data.

Thu Aug  5 12:18:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* config/unix-gdb.exp (gdb_exit): Add "wait".

Thu Aug  5 18:14:06 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t06/signals.exp:  xfail the continue from the handler for all
	targets.

	* gdb.t07/watchpoint.exp:  clear_xfail for i386 when calling a
	function with watchpoints enabled, the i386 call dummy starts with
	a call.

	* gdb.t00/teststrategy.exp, gdb.t09/Makefile.in:  Handle the way
	386 bsd names its corefiles.

Wed Aug  4 08:53:41 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t10/Makefile.in (nodebug.o):  Don't use "-c -o", many
	compilers don't grok it.
	* gdb.t16/gdbme.c (ctable1):  Initialize unsigned char array
	with small octal ints rather than character constants, which
	are signed and might not fit if first promoted to int.

Tue Aug  3 18:28:25 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t09/Makefile.in (clean):  Remove corefile.

Mon Aug  2 12:47:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t07/watchpoint.exp: Add missing `$prompt $'.

Mon Aug  2 12:30:14 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
			  and Jim Kingdon (kingdon@cygnus.com)

	* gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for
	NO_SINGLE_STEP machines.  Fix comment about its cause.  Uncomment
	the `continue' test right after it (also xfailed if NO_SINGLE_STEP).

Fri Jul 30 19:46:55 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t17/interrupt.exp: Add xfail for hppa.

Fri Jul 30 12:54:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp,
	gdb.t09/corefile.exp:  Cleanup xfails for fixed mips bugs.
	* gdb.t13/bitfields.exp, gdbme.c:  Examine a variable in the inferior
	to determine signed-ness of bitfields and use the result to setup
	the xfail.
	* gdb.t15/gdbme.c:  Add comments to the two indirect call0a lines.
	* gdb.t15/funcargs.exp:  Use them to step until the second indirect
	call line is reached if necessary.

Thu Jul 29 20:33:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/wierd.exp: New test, for nameless baseclasses.

Mon Jul 26 00:15:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/break.exp: Also test `clear' command.

Wed Jul 21 18:03:38 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* gdb.t00/teststrategy.exp: Remove extra quote.

	* gdb.t07/watchpoint.exp: Change xfail for calling function with
	watchpoint enabled to be for all non-68k machines.

	* gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test.

Mon Jul 19 23:59:26 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-*
	targets use aout.mt instead of ecoff.mt as gas understands
	standard aout format.

Mon Jul 19 18:14:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* lib/gdb.exp (runto): Don't insist that function we are running to
	was compiled with -g.

	* gdb.t10/{nodebug.{c,exp},Makefile.in}: New test.

	* gdb.t17/interrupt.exp: Before sending ^C, give the inferior time
	to get back into the read system call.
	Accept leading newline in case where we woke it up.

Sun Jul 18 08:40:45 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}:  New files
	to make the stabs test work on ecoff systems using gcc and -with-stabs.
	* gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}:  Modify to
	enable ecoff configuration.

Thu Jul 15 11:54:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t15/funcargs.exp (localvars_in_indirect_call): New test.

Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t16/printcmds.exp: Add another printf test.

Wed Jul 14 15:37:13 1993  Ian Lance Taylor  (ian@cygnus.com)

	* configure.in: If configured -with-stabs on any target, add
	stabsdirs to configdirs.

Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is
	fun" so pattern does not match the command itself.

Mon Jul 12 11:22:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames.

Sun Jul 11 12:03:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t17/interrupt.exp: Test for more things.

Fri Jul  9 14:11:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t07/watchpoint.exp: In until test, deal with the way the DEC
	compiler arranges the code and line numbers.

	* gdb.t17/interrupt.exp: Don't send \n after ^C.

Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t00/help.exp:  Increase expect input buffer size.

Thu Jul  8 14:26:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.exp: Remove sparc xfail; bug fixed.

	* gdb.t07/watchpoint.exp: Add xfail for hppa.

	* gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug.

	* gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint
	[0-9]*, not just [0-9].

Wed Jul  7 17:52:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972.

	* gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use.

Tue Jul  6 13:54:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/help.exp: Replace most of docstring for "continue" with .*.

Mon Jul  5 22:03:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.c: Add xfails for sun3.

	* gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836.

	* gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597.  Also add
	test_stepping tests.

Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t{06,17}/Makefile.in (clean): Remove all executables.

	* gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug.

	* gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c
	rather than actually putting it through cpp twice.

	* gdb.t06/signals.exp: Add xfails for unixware and rs6000.

Fri Jul  2 10:48:03 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/mips-gdb.exp (gdb_exit): Removed close statement which is
	no longer needed.

Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t06/signals.exp: Add test for sparc bug with do_save_insn.

	* gdb.t20/{classes,inherit}.exp: If a class which doesn't use any
	C++ features prints as "struct", make it a pass, not an xfail.

Thu Jul  1 22:03:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t22/virtfunc.exp: Remove a bunch of xfails.
	Don't require VA to print as "class" rather than "struct".

Thu Jul  1 18:27:40 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.t06/twice.exp: Don't care about the file name GDB prints.

Wed Jun 30 18:01:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end.

Tue Jun 29 13:15:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t12/scope.exp:  Remove xfail for parameter printing in wrong
	order.

Tue Jun 29 09:22:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t16/printcmds.exp: Add printf tests.

	* gdb.t06/{twice.{c,exp},Makefile.in}: New test.

	* gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too.

Mon Jun 28 11:25:59 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t20/classes.exp:  Add clear_xfail's before printing summary
	pass counts, to counteract any existing or future setup_xfails.

Mon Jun 28 09:15:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros
	{BEGIN,END}_COMMON for common block instead of STAB.
	* gdb.stabs/wierd.exp: Add xfail for rs6000.

	* gdb.stabs/wierd.def: Make value of N_GSYM's 0.
	intp_var should be N_GSYM not N_LSYM.
	wierd-aout.S: Use a label for the value of the N_SO.
	wierd.def: Remove all backslashes.
	wierd-{aout,xcoff}.S: Put a few tests with backslashes here.

Mon Jun 28 07:21:51 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t20/gdbme.cc (main): Move variable initialization for AIX to
	get the expected next to inheritance3.

Sun Jun 27 12:29:53 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t00/teststrategy.exp: Remove expected failure for mips-*-*
	now that gcc-2.4 gets it right.

Fri Jun 25 12:00:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test.

	* gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of
	generating comp-info.exp which works for cross-compilation.

Thu Jun 24 16:55:05 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t11/list.exp:  For SVR4 xfails, match "*-*-sysv4*", not
	"*-*-sysv4.*".

Tue Jun 22 21:17:26 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t01/run.exp:  Start with a fresh gdb.
	* gdb.t11/list.exp:  For SVR4 xfails, match on all versions of
	SVR4.x.

Mon Jun 21 15:23:22 1993  Fred Fish  (fnf@cygnus.com)

	* {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07,
	gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15,
	gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/
	Makefile.in (distclean, realclean):  Remove gdbme.c from list of
	things to remove.

Sat Jun 19 07:49:10 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t24/demangle.exp (test_gnu_style_demangling):  Add some new
	test cases from bug reports.

Fri Jun 18 10:38:49 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t06/break.exp:  Add xfails for sparc-sun-solaris2.*.
	* gdb.t12/scope.exp:  Add clear_xfails at appropriate places to
	  avoid spurious xfails.
	* gdb.t20/classes.exp:  Add xfails for longstanding C++ problems.
	* gdb.t21/cplusfuncs.exp:  Add xfails for sparc-sun-solaris2.*.
	* gdb.t22/virtfunc.exp:  Add xfails for longstanding C++ problems.

Wed Jun 16 10:11:57 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/teststrategy.exp:  Rework to provide more useful
	description of each test, fix problem with systems that define
	ALIGN_STACK_ON_STARTUP code, other misc cleanups.
	* gdb.t06/break.exp (test_next_with_recursion):  Fix expected
	results for "next over recursive call" so timeouts aren't taken
	by error.

Mon Jun 14 09:09:04 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.t12/scope.exp: Test printing of variables before run.

	* gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are
	printed in wrong order due to sorting.

Sat Jun 12 15:03:58 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/teststrategy.exp:  Fix expected results for printing
	user entered string constant.  Is array of char, prints with no
	address.

	* gdb.t00/{default.exp, help.exp}:  Account for changes to radix
	commands.
	* gdb.t16/gdbme.c:  Add and use struct containing arrays of char.
	* gdb.t16/printcmds.exp:  Fix all lines that match "unsigned char *".
	* gdb.t16/printcmds.exp (test_print_char_arrays):  Test printing
	of struct of char arrays.
	* gdb.t00/radix.exp:  New tests for radix commands.

Fri Jun 11 13:12:27 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.t16/printcmd.exp: Print a variable before running program
	(with xfail for AIX).

Thu Jun 10 11:04:04 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.t06/{signals.exp,signals.c,Makefile.in}: New test.

	* gdb.t16/printcmd.exp: Don't print variables before running program.

	* gdb.t06/break.exp: Don't require envp argument to main.

	* gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword.

	* gdb.t02/whatis.exp, gdb.t11/list.exp:
	Add xfails for rs6000.

	* gdb.t02/whatis.exp: Change other tests not to re-test something
	we already tested.

	* gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure
	each type used has a variable of that type.

Tue Jun  8 16:45:20 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)

	* gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure.

Fri Jun  4 11:07:19 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: change srctrigger to be a file, not a directory

Fri Jun  4 08:23:57 1993  Ian Lance Taylor  (ian@cygnus.com)

	* configure.in (mips-idt-ecoff*): Added trailing '*'.

	* gdb.t11/list.exp: Fixed a couple of typos.

Tue Jun  1 21:28:06 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00 (teststrategy.exp):  Remove notice about PR 1823.  Bug
	is fixed and PR is closed.
	* gdb.t16 (gdbme.c):  Add simple test string variable.
	* gdb.t16 (printcmds.exp):  Add tests with simple test string
	variable, primarily for boundaries on "set print elements".

Mon May 31 11:36:08 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.stabs/wierd.exp: Remove xfail for printing big integer.
	Make leading 0's optional and don't expect a tab in the middle
	of the number.

	* gdb.t00/teststrategy.exp: Remove xgdb before trying the copy.

	* gdb.stabs/wierd.def: Type attributes must be preceded by number=.
	* gdb.stabs/wierd.exp: Remove xfails for type attributes.  Also
	don't end command passed to gdb_test with newline.

	* gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the
	signed keyword away, don't expect signed bitfields to be signed.

	* gdb.t13/bitfields.exp (bitfield containment): Accept the fields
	printing with only as many 1's as are in the field as well as printing
	with 32 1's (see comment).

Sat May 29 17:57:01 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/default.exp:  Start with a fresh gdb.
	* configure.in (configdirs):  Remove gdb.t31 until the chill
	compiler works again.  It no longer is able to find chillrt0
	since it isn't in libchill.a anymore.
	* gdb.stabs/wierd.exp:  Rewrite to properly handling a missing
	wierd.o, make more modular.
	* gdb.stabs/wierd.def (bad_neg0type, bad_neg0const):  Remove
	spurious newlines that caused problems.

Wed May 26 09:57:19 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Move test with enums and partial symbols from gdb.t03/ptype.exp
	to gdb.stabs/wierd.exp since GCC has worked around the bug.
	gdb.stabs/wierd.{exp,def}: Many new tests.

	* gdb.t00/default.exp: update info line for new message.

	* gdb.t02/{whatis.exp,gdbme.c}:
	Test that "char *" doesn't print as "caddr_t".

Tue May 25 13:28:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t00/help.exp: Use .* in place of some help messages which
	just changed.
	gdb.t00/default.exp: Update "info frame" test for new message.
	* gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test.
	Remove some xfails

Mon May 24 00:24:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdb.t03/{gdbme.c,ptype.exp}:
	Add tests for typedef'd struct and union without tags.
	Also check "whatis" on a variable of a typedef'd enum without a tag.

	* gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see
	PRMS 1823; the bug still exists but isn't reproduced by this test
	anymore), and remove rs6000 XFAIL (the bug is fixed).

	* gdb.t03/ptype.exp: Comment out a lot of tests which are basically
	duplicated from whatis.exp.  For those that are left, accept
	"long", "long int", or "int" for long variables (whatis.exp already
	has an XFAIL for "int", so no need to fail it here).

	* gdb.t02/whatis.exp, gdb.t10/crossload.exp:
	Deal with GCC's names for types now that GDB uses the compiler's names.

	* gdb.t02/{Makefile.in,gdbme.c,whatis.exp}:  If not GCC, do some
	setup_xfail's for sunos4.  If we #defined the signed keyword away,
	don't expect GDB to know that char it is signed.

	* gdb.t00/teststrategy.exp: Update for symbolic signal names.

Sun May 23 08:44:55 1993  Fred Fish  (fnf@cygnus.com)

	* configure.in (configdirs):  Add gdb.t24 for C++ tests that
	should work on any system, regardless of debugging format.
	* gdb.t21/demangle.exp:  Move to gdb.t24.
	* gdb.t24/demangle.exp:  Move from gdb.t21.
	* gdb.t24/{Makefile.in, configure.in}:  New files.

Thu May 20 19:39:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* configure.in: Do gdb.stabs and C++ tests only for stabs.
	* gdb.stabs: New directory.

Tue May 18 21:12:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?"
	not just "Quit anyway?".

Tue May 18 17:13:20 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t21/demangle.exp:  Add a couple of new patterns.  Ensure
	that all setup_xfails are immediately followed by clear_xfails.

Tue May 11 09:10:47 1993  Fred Fish  (fnf@cygnus.com)

	* config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp,
	gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp,
	gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp,
	gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp,
	gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp,
	gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
	gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
	gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp,
	gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp,
	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp,
	gdb.t31/chillvars.exp, lib/gdb.exp:
	Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to
	bug-gdb@prep.ai.mit.edu.

Fri May  7 09:15:35 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t17/callfuncs.exp (do_function_calls):  Call t_double_values
	with 0.0, not integer 0.

Fri Apr 30 13:17:24 1993  Jim Kingdon  (kingdon@cygnus.com)

	* gdb.t06/break.exp: Update for "Kill the program" message change.

Fri Apr 30 09:42:57 1993  Fred Fish  (fnf@cygnus.com)

	* Makefile.in (GDBFLAGS):  Set to -nx.
	* Makefile.in (site.exp):  Use GDBFLAGS.

Wed Apr 28 13:19:07 1993  K. Richard Pixley  (rich@rtl.cygnus.com)

	* */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory
	  Makefiles.
	  (check): depend on just-check.
	  (just-check): added so that tests can be run without a noop
	  build pass.

Fri Apr 23 18:13:28 1993  K. Richard Pixley  (rich@rtl.cygnus.com)

	Switch to using configure's configdirs.
	* Makefile.in (Makefile): add configure.in dependency.
	  (SUBDIRS): removed redundant assignment.
	* configure.in: switch subdirs assignment to configdirs.
	* gdb.t*/configure.in: new files.

Thu Apr 22 08:27:53 1993  Ian Lance Taylor  (ian@cygnus.com)

	* gdb.t07/watchpoint.exp: Removed a29k expected failure which now
	works.

Tue Apr 20 13:38:40 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.{t20,t21,t22,t23}/Makefile.in:  Use $(srcdir) to avoid $<
	in explicit rules.  Apparently this is not supported by some makes.

Mon Apr 19 01:54:53 1993  John Gilmore  (gnu@cygnus.com)

	* gdb.t31/Makefile.in:  Use $(srcdir) when avoiding $<, sigh.

Fri Apr 16 09:33:46 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* config/unix-gdb.exp:  Add back missing return 0 which mysteriously
	disappeared.

Thu Apr 15 02:28:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)

	* gdb.t31/Makefile.in:  Avoid $< in explicit rule.

Wed Apr 14 16:38:47 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t07/watchpoint.exp:  Remove setup_xfail for i486
	watchpoint problem that is now fixed.
	* gdb.t30/chexp.exp:  Remove setup_xfail for printing
	uninitialized convenience variables.
	* gdb.t31/chillvars.exp:  Fix expected patterns for printing
	structures.

Wed Apr 14 12:55:58 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS
	which causes expect to get out of sync with gdb on long output
	from help set.
	* gdb.t09/corefile.exp: Make expected pattern for core file
	failing signal and frame output format less sun specific.

Tue Apr 13 23:18:07 1993  Per Bothner  (bothner@cygnus.com)

	* gdb.t31/chillvars.exp:  Add and remove initial dummy
	breakpoint, so that symbol table is forced in.
	(Needed at least on Sunos4, though it seems not SVR4.)
	* gdb.t31/chillvars.exp:  Update for changed output format.

Sun Apr 11 17:21:45 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path.

Wed Apr  7 21:28:21 1993  Rob Savoye  (rob@cygnus.com)

	* Makefile.in: Added --srcdir when invoking runtest, removed the
	need for a local config file. (optional now)

Wed Apr  7 14:13:41 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t21/demangle.exp:  Only count real fails (not xfails) for
	failure count used to force early termination.  Add some more
	expected failures for gnu style demangling.

Thu Apr  1 09:50:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the
	pmi variable from gdb.t20/gdbme to get optimized away.
	* gdb.t00/teststrategy.exp: Added expected failure for mips-*-*.
	Check for written corefile upon timeout _and_ eof.

Tue Mar 30 09:58:16 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* config/unix-gdb.exp:  Add missing return 0.

Tue Mar 30 08:34:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdb.t16/printcmds.exp:  Remove misplaced xfail that caused an early
	test termination.

Mon Mar 29 17:37:25 1993  Fred Fish  (fnf@cygnus.com)

	* configure.in (subdirs):  Put back gdb.t17 which mysteriously
	disappeared.

Thu Mar 25 21:05:16 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t10/crossload.exp:  Disable the i860-elf test until such
	time as i860 support works.

	* gdb.t15/funcargs.exp:  Fix expected outputs to include 
	"backtrace 100\r" rather than just "backtrace\r", to match last
	change.

Thu Mar 25 12:14:28 1993  Ian Lance Taylor  (ian@cygnus.com)

	* config/udi-gdb.exp (gdb_exit): Remove close command.
	(gdb_target_udi): New procedure to set the UDI target.
	(gdb_start): Don't remove *_soc files.  Use gdb_target_udi.
	* gdb.t00/default.exp: Added expected failures for a29k-*-udi.
	Added waits for prompts after several question responses.  Added
	some more responses used by a29k-amd-udi-gdb.
	* gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
	pass different arguments, restart UDI connection after program
	completion.
	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
	gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
	* gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
	gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
	gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
	after program completion.
	* gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
	compiled with a SELECT_VECS setting.
	* gdb.t15/funcargs.exp: Use argument to backtrace to prevent
	infinite recursion.

	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
	Added checks for COFF results, and made them expected failures for
	all targets.  It would be better to make them expected failures
	for COFF targets only.

Wed Mar 24 14:43:38 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add null dvi target, don't bother to recurse
	through test directories for info and install-info; rename
	$(datadir) to be dejagnu instead of deja-gnu

Wed Mar 24 09:48:03 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t31/gdbme.ch:  Re-enable code that previously caused
	compiler to coredump.
	* gdb.t31/chillvars.exp:  Re-enable tests that depend on that
	code.

Tue Mar 23 08:53:42 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t31/gdbme.ch:  Comment out code that causes chill compiler
	coredump.
	* gdb.t31/chillvars.exp:  Comment out tests that depend on that
	code.

Sun Mar 21 17:56:47 1993  Rob Savoye  (rob at darkstar.cygnus.com)

	* gdb.t03/ptype.exp: tests for return code from gdb_test.
	* gdb.t00/teststrategy.exp: Uses which proc rather than spawning
	which in a shell. Deletes xgdb when done.
	* config/unix-gdb.exp: Won't try to spawn $GDB unless it exists.
	Tests the return from the "set height" or "set width" commands.
	Added a few return codes where needed.

Wed Mar 17 11:31:01 1993  Fred Fish  (fnf@cygnus.com)

	* Makefile.in (SUBDIRS):  Add gdb.t17.
	* configure.in (subdirs):  Add gdb.t17.
	* gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}:  New test
	files to test gdb's calling of functions in the inferior with
	the correct arguments and gdb's ability to retrieve any
	result returned.

Tue Mar 16 15:37:11 1993  Fred Fish  (fnf@cygnus.com)

	* config/unix-gdb.exp (gdb_exit):  Remove close commands that
	may be called after gdb goes away.  Previous versions of expect
	needed these to avoid file descriptor leaks, but they cause
	errors with the current revision of expect.
	* gdb.t00/gdbvars.exp:  Use -re on expected output after
	setting sevenbit-strings.
	* gdb.t04/setvar.exp, gdb.t13/bitfields.exp:  Make commands
	to set sevenbit-strings consistent across tests.
	gdb.t30/chexp.exp, gdb.t31/chillvars.exp:  Make commands to
	set sevenbit-strings consistent across tests.

Fri Mar 12 08:47:20 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t21/demangle.exp (proc demangle):  Adjust quotes in an
	expected output to match current "expect" expectations.

Wed Mar 10 18:01:49 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/default.exp:  Change expected output for default "source"
	command, to match new gdb behavior which requires a filename to
	source.

Tue Mar  9 11:00:56 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t07/watchpoint.exp (test_simple_watchpoint):  Set up
	expected fail for i486-*-* that misses the marker2 function.
	* gdb.t10/crossload.exp (bfddefault):  Allow successful
	recognition of a format to pass even if no symbols are found.
	Explicitly catch failures where the format is not recognized
	or is ambiguous, and add the reason to the fail message.
	* gdb.t10/crossload.exp (bfdexplicit):  Catch failure where
	the cause is and invalid target and add reason to failure message.
	* gdb.t10/crossload.exp:  Fix bfd target names for elf32-m68k,
	elf32-i386, elf32-sparc, and elf32-i860.
	* gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
	Set up expected failure for 'filename'::variable scope resolution,
	which is now apparently broken on all targets.
	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
	gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
	gdb.t23/templates.exp:   Change failure for missing binfile into
	just a warning.
	gdb.t21/demangle.exp:  Change all cfront references to 'arm'
	references.

Mon Mar  8 19:20:28 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/default.exp:  Add expected output for default "source"
	command, to match new gdb behavior.
	* gdb.t09/corefile.exp:  Use GDBFLAGS when spawning GDB.

Sun Mar  7 15:14:09 1993  Rob Savoye  (rob@cygnus.com)

	* config/*-gdb.exp: returns an error, rather than exiting on
	internal errors.

Tue Mar  2 18:09:32 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t03/gdbme.c:  Add pointer to struct variable.
	* gdb.t03/ptype.exp:  Test equivalence of '.' and '->' for
	referencing struct members.

Thu Feb 25 10:39:06 1993  Ian Lance Taylor  (ian@cygnus.com)

	* configure.in (mips-idt-ecoff): New target.
	* config/mips-gdb.exp: New file for remote board using MIPS remote
	debugging protocol.

	* Redid configuration scheme.  Removed gdb.t*/configure.in.
	Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*.  Changed to use CC, CXX
	instead of CC_FOR_TARGET, CXX_FOR_TARGET.  Added mostlyclean and
	distclean targets.  Built executables via .o files.  Adjusted
	tests to account for source files in $(srcdir) rather than
	$(objdir).
	* lib/gdb.exp (runto): Don't expect () after the function name,
	because it may have arguments.

Wed Feb 24 08:05:38 1993  Ian Lance Taylor  (ian@cygnus.com)

	* gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp,
	gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
	expected failures for mips-idt-* and mips-sgi-*.
	* gdb.t00/default.exp (attach): Kill process if requested.
	* gdb.t00/help.exp (help target core, help target): Accept a gdb
	that does not read core files.
	* gdb.t01/run.exp: Removed checks for exit status code.
	* gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
	it is linked in.
	* gdb.t03/ptype.exp: Increase timeout when calling malloc.
	* gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
	appropriate, rather than doing it by hand.
	* gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
	execution.
	* gdb.t10/crossload.exp: Kill existing program if needed.
	* gdb.t15/funcargs.exp: Use delete_breakpoints function where
	appropriate, rather than doing it by hand.  Always increase
	timeout for this test, not just for VxWorks.

Wed Feb 24 08:03:38 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t31/chillvars.exp (test_structs):  New proc to test printing
	of Chill STRUCT types and STRUCT values.
	* gdb.t31/chillvars.exp (test_strings):  Expect "CHAR" now, rather
	than "char".
	* gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
	struct2):  New struct definitions and initializations to test 
	simple Chill STRUCT types.

Tue Feb 23 11:55:06 1993  Fred Fish  (fnf@cygnus.com)

	* gdb.t00/teststrategy.exp:  Track reversion in gdb to not print
	the null byte at the end of strings.
	* gdb.t00/default.exp:  Make show version insensitive to copyright
	date.
	* gdb.t16/in-gdbme.c (ctable1, ctable2):  Make explicitly unsigned
	to avoid dependencies on target char signedness.
	* gdb.t16/printcmds.exp:  Update expected results for explicitly
	unsigned char.
	* gdb.t16/printcmds.exp:  Remove setup_xfails for i960 that should
	now work.
	* gdb.t21/demangle.exp:  Add many more patterns for template
	demangling, most of them being expected failures.
	* gdb.t21/demangle.exp (proc demangle):  Quote the demangled
	string we are matching for, to match on the whole string.
	* gdb.t21/demangle.exp:  Add many new test strings to demangle,
	and fix a whole bunch that had incorrect expected output but were
	passing anyway because of the bug in "proc demangle".
	* gdb.t31/chillvars.exp:  Remove setup_xfail for printing string
	type.
	* gdb.t31/in-gdbme.ch:  Uncomment string4, now compiles.

Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * gdb/testsuite: made modifications to testcases, etc., to allow
        them to work properly  given the reorganization of deja-gnu and the
        relocation of the testcases from deja-gnu to a "tool" subdirectory.

Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)

	* gdb/testsuite: Initial creation of gdb/testsuite.
	Migrated dejagnu testcases and support files for testing nm to
	gdb/testsuite from deja-gnu.  These files were moved "as is"
	with no modifications.  This migration is part of a major overhaul
	of dejagnu.  The modifications to these testcases, etc., which
	will allow them to work with the new version of dejagnu will be
	made in a future update.
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: