Commit | Line | Data |
---|---|---|
618f726f | 1 | # Copyright 1992-2016 Free Software Foundation, Inc. |
c906108c SS |
2 | |
3 | # This program is free software; you can redistribute it and/or modify | |
4 | # it under the terms of the GNU General Public License as published by | |
e22f8b7c | 5 | # the Free Software Foundation; either version 3 of the License, or |
c906108c | 6 | # (at your option) any later version. |
e22f8b7c | 7 | # |
c906108c SS |
8 | # This program is distributed in the hope that it will be useful, |
9 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
10 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
11 | # GNU General Public License for more details. | |
e22f8b7c | 12 | # |
c906108c | 13 | # You should have received a copy of the GNU General Public License |
e22f8b7c | 14 | # along with this program. If not, see <http://www.gnu.org/licenses/>. |
c906108c | 15 | |
c906108c SS |
16 | # This file was written by Fred Fish. (fnf@cygnus.com) |
17 | ||
18 | # Generic gdb subroutines that should work for any target. If these | |
19 | # need to be modified for any target, it can be done with a variable | |
20 | # or by passing arguments. | |
21 | ||
97c3f1f3 JK |
22 | if {$tool == ""} { |
23 | # Tests would fail, logs on get_compiler_info() would be missing. | |
24 | send_error "`site.exp' not found, run `make site.exp'!\n" | |
25 | exit 2 | |
26 | } | |
27 | ||
c906108c | 28 | load_lib libgloss.exp |
17e1c970 | 29 | load_lib cache.exp |
a25eb028 | 30 | load_lib gdb-utils.exp |
c906108c SS |
31 | |
32 | global GDB | |
c906108c | 33 | |
f71c18e7 PA |
34 | # The spawn ID used for I/O interaction with the inferior. For native |
35 | # targets, or remote targets that can do I/O through GDB | |
36 | # (semi-hosting) this will be the same as the host/GDB's spawn ID. | |
37 | # Otherwise, the board may set this to some other spawn ID. E.g., | |
38 | # when debugging with GDBserver, this is set to GDBserver's spawn ID, | |
39 | # so input/output is done on gdbserver's tty. | |
40 | global inferior_spawn_id | |
41 | ||
c906108c | 42 | if [info exists TOOL_EXECUTABLE] { |
4ec70201 | 43 | set GDB $TOOL_EXECUTABLE |
c906108c SS |
44 | } |
45 | if ![info exists GDB] { | |
46 | if ![is_remote host] { | |
47 | set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]] | |
48 | } else { | |
4ec70201 | 49 | set GDB [transform gdb] |
c906108c SS |
50 | } |
51 | } | |
52 | verbose "using GDB = $GDB" 2 | |
53 | ||
6b8ce727 DE |
54 | # GDBFLAGS is available for the user to set on the command line. |
55 | # E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble | |
56 | # Testcases may use it to add additional flags, but they must: | |
57 | # - append new flags, not overwrite | |
58 | # - restore the original value when done | |
c906108c SS |
59 | global GDBFLAGS |
60 | if ![info exists GDBFLAGS] { | |
6b8ce727 | 61 | set GDBFLAGS "" |
c906108c SS |
62 | } |
63 | verbose "using GDBFLAGS = $GDBFLAGS" 2 | |
64 | ||
2f4e0a80 DE |
65 | # Make the build data directory available to tests. |
66 | set BUILD_DATA_DIRECTORY "[pwd]/../data-directory" | |
67 | ||
6b8ce727 | 68 | # INTERNAL_GDBFLAGS contains flags that the testsuite requires. |
1be00882 DE |
69 | global INTERNAL_GDBFLAGS |
70 | if ![info exists INTERNAL_GDBFLAGS] { | |
2f4e0a80 | 71 | set INTERNAL_GDBFLAGS "-nw -nx -data-directory $BUILD_DATA_DIRECTORY" |
1be00882 | 72 | } |
6b8ce727 | 73 | |
9e0b60a8 | 74 | # The variable gdb_prompt is a regexp which matches the gdb prompt. |
3714cea7 DE |
75 | # Set it if it is not already set. This is also set by default_gdb_init |
76 | # but it's not clear what removing one of them will break. | |
77 | # See with_gdb_prompt for more details on prompt handling. | |
c906108c | 78 | global gdb_prompt |
9e0b60a8 | 79 | if ![info exists gdb_prompt] then { |
3714cea7 | 80 | set gdb_prompt "\\(gdb\\)" |
c906108c SS |
81 | } |
82 | ||
94696ad3 | 83 | # A regexp that matches the pagination prompt. |
c3f814a1 | 84 | set pagination_prompt [string_to_regexp "---Type <return> to continue, or q <return> to quit---"] |
94696ad3 | 85 | |
6006a3a1 BR |
86 | # The variable fullname_syntax_POSIX is a regexp which matches a POSIX |
87 | # absolute path ie. /foo/ | |
d0b76dc6 | 88 | set fullname_syntax_POSIX {/[^\n]*/} |
6006a3a1 BR |
89 | # The variable fullname_syntax_UNC is a regexp which matches a Windows |
90 | # UNC path ie. \\D\foo\ | |
d0b76dc6 | 91 | set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\} |
6006a3a1 BR |
92 | # The variable fullname_syntax_DOS_CASE is a regexp which matches a |
93 | # particular DOS case that GDB most likely will output | |
94 | # ie. \foo\, but don't match \\.*\ | |
d0b76dc6 | 95 | set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\} |
6006a3a1 BR |
96 | # The variable fullname_syntax_DOS is a regexp which matches a DOS path |
97 | # ie. a:\foo\ && a:foo\ | |
d0b76dc6 | 98 | set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\} |
6006a3a1 BR |
99 | # The variable fullname_syntax is a regexp which matches what GDB considers |
100 | # an absolute path. It is currently debatable if the Windows style paths | |
101 | # d:foo and \abc should be considered valid as an absolute path. | |
102 | # Also, the purpse of this regexp is not to recognize a well formed | |
103 | # absolute path, but to say with certainty that a path is absolute. | |
104 | set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)" | |
105 | ||
93076499 ND |
106 | # Needed for some tests under Cygwin. |
107 | global EXEEXT | |
108 | global env | |
109 | ||
110 | if ![info exists env(EXEEXT)] { | |
111 | set EXEEXT "" | |
112 | } else { | |
113 | set EXEEXT $env(EXEEXT) | |
114 | } | |
115 | ||
bb2bed55 NR |
116 | set octal "\[0-7\]+" |
117 | ||
eceb0c5f | 118 | set inferior_exited_re "(\\\[Inferior \[0-9\]+ \\(.*\\) exited)" |
fda326dd | 119 | |
085dd6e6 JM |
120 | ### Only procedures should come after this point. |
121 | ||
c906108c SS |
122 | # |
123 | # gdb_version -- extract and print the version number of GDB | |
124 | # | |
125 | proc default_gdb_version {} { | |
126 | global GDB | |
6b8ce727 | 127 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c | 128 | global gdb_prompt |
5e92f71a TT |
129 | global inotify_pid |
130 | ||
131 | if {[info exists inotify_pid]} { | |
132 | eval exec kill $inotify_pid | |
133 | } | |
134 | ||
fa335448 | 135 | set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --version"] |
4ec70201 | 136 | set tmp [lindex $output 1] |
c906108c SS |
137 | set version "" |
138 | regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version | |
139 | if ![is_remote host] { | |
6b8ce727 | 140 | clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c | 141 | } else { |
6b8ce727 | 142 | clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c SS |
143 | } |
144 | } | |
145 | ||
146 | proc gdb_version { } { | |
ae59b1da | 147 | return [default_gdb_version] |
c906108c SS |
148 | } |
149 | ||
150 | # | |
151 | # gdb_unload -- unload a file if one is loaded | |
608e2dbb | 152 | # Return 0 on success, -1 on error. |
c906108c SS |
153 | # |
154 | ||
155 | proc gdb_unload {} { | |
156 | global verbose | |
157 | global GDB | |
158 | global gdb_prompt | |
159 | send_gdb "file\n" | |
160 | gdb_expect 60 { | |
161 | -re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
162 | -re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
959e7469 PM |
163 | -re "A program is being debugged already.*Are you sure you want to change the file.*y or n. $" { |
164 | send_gdb "y\n" | |
c906108c SS |
165 | exp_continue |
166 | } | |
167 | -re "Discard symbol table from .*y or n.*$" { | |
168 | send_gdb "y\n" | |
169 | exp_continue | |
170 | } | |
171 | -re "$gdb_prompt $" {} | |
172 | timeout { | |
975531db | 173 | perror "couldn't unload file in $GDB (timeout)." |
c906108c SS |
174 | return -1 |
175 | } | |
176 | } | |
608e2dbb | 177 | return 0 |
c906108c SS |
178 | } |
179 | ||
180 | # Many of the tests depend on setting breakpoints at various places and | |
181 | # running until that breakpoint is reached. At times, we want to start | |
182 | # with a clean-slate with respect to breakpoints, so this utility proc | |
183 | # lets us do this without duplicating this code everywhere. | |
184 | # | |
185 | ||
186 | proc delete_breakpoints {} { | |
187 | global gdb_prompt | |
188 | ||
a0b3c4fd JM |
189 | # we need a larger timeout value here or this thing just confuses |
190 | # itself. May need a better implementation if possible. - guo | |
191 | # | |
d8b901ed PA |
192 | set timeout 100 |
193 | ||
194 | set msg "delete all breakpoints in delete_breakpoints" | |
195 | set deleted 0 | |
196 | gdb_test_multiple "delete breakpoints" "$msg" { | |
197 | -re "Delete all breakpoints.*y or n.*$" { | |
4ec70201 | 198 | send_gdb "y\n" |
c906108c SS |
199 | exp_continue |
200 | } | |
d8b901ed PA |
201 | -re "$gdb_prompt $" { |
202 | set deleted 1 | |
203 | } | |
c906108c | 204 | } |
d8b901ed PA |
205 | |
206 | if {$deleted} { | |
207 | # Confirm with "info breakpoints". | |
208 | set deleted 0 | |
209 | set msg "info breakpoints" | |
210 | gdb_test_multiple $msg $msg { | |
211 | -re "No breakpoints or watchpoints..*$gdb_prompt $" { | |
212 | set deleted 1 | |
213 | } | |
214 | -re "$gdb_prompt $" { | |
215 | } | |
c906108c | 216 | } |
d8b901ed PA |
217 | } |
218 | ||
219 | if {!$deleted} { | |
220 | perror "breakpoints not deleted" | |
c906108c SS |
221 | } |
222 | } | |
223 | ||
c906108c SS |
224 | # Generic run command. |
225 | # | |
226 | # The second pattern below matches up to the first newline *only*. | |
227 | # Using ``.*$'' could swallow up output that we attempt to match | |
228 | # elsewhere. | |
229 | # | |
1d41d75c DE |
230 | # N.B. This function does not wait for gdb to return to the prompt, |
231 | # that is the caller's responsibility. | |
232 | ||
c906108c | 233 | proc gdb_run_cmd {args} { |
e11ac3a3 | 234 | global gdb_prompt use_gdb_stub |
c906108c | 235 | |
a25eb028 MR |
236 | foreach command [gdb_init_commands] { |
237 | send_gdb "$command\n" | |
c906108c SS |
238 | gdb_expect 30 { |
239 | -re "$gdb_prompt $" { } | |
240 | default { | |
4ec70201 PA |
241 | perror "gdb_init_command for target failed" |
242 | return | |
c906108c SS |
243 | } |
244 | } | |
245 | } | |
246 | ||
e11ac3a3 | 247 | if $use_gdb_stub { |
c906108c | 248 | if [target_info exists gdb,do_reload_on_run] { |
b741e217 | 249 | if { [gdb_reload] != 0 } { |
4ec70201 | 250 | return |
917317f4 | 251 | } |
4ec70201 | 252 | send_gdb "continue\n" |
c906108c SS |
253 | gdb_expect 60 { |
254 | -re "Continu\[^\r\n\]*\[\r\n\]" {} | |
255 | default {} | |
256 | } | |
4ec70201 | 257 | return |
c906108c SS |
258 | } |
259 | ||
260 | if [target_info exists gdb,start_symbol] { | |
4ec70201 | 261 | set start [target_info gdb,start_symbol] |
c906108c | 262 | } else { |
4ec70201 | 263 | set start "start" |
c906108c SS |
264 | } |
265 | send_gdb "jump *$start\n" | |
4ec70201 | 266 | set start_attempt 1 |
917317f4 JM |
267 | while { $start_attempt } { |
268 | # Cap (re)start attempts at three to ensure that this loop | |
269 | # always eventually fails. Don't worry about trying to be | |
270 | # clever and not send a command when it has failed. | |
271 | if [expr $start_attempt > 3] { | |
4ec70201 PA |
272 | perror "Jump to start() failed (retry count exceeded)" |
273 | return | |
c906108c | 274 | } |
4ec70201 | 275 | set start_attempt [expr $start_attempt + 1] |
917317f4 JM |
276 | gdb_expect 30 { |
277 | -re "Continuing at \[^\r\n\]*\[\r\n\]" { | |
4ec70201 | 278 | set start_attempt 0 |
917317f4 JM |
279 | } |
280 | -re "No symbol \"_start\" in current.*$gdb_prompt $" { | |
4ec70201 PA |
281 | perror "Can't find start symbol to run in gdb_run" |
282 | return | |
917317f4 JM |
283 | } |
284 | -re "No symbol \"start\" in current.*$gdb_prompt $" { | |
4ec70201 | 285 | send_gdb "jump *_start\n" |
917317f4 JM |
286 | } |
287 | -re "No symbol.*context.*$gdb_prompt $" { | |
4ec70201 | 288 | set start_attempt 0 |
917317f4 JM |
289 | } |
290 | -re "Line.* Jump anyway.*y or n. $" { | |
291 | send_gdb "y\n" | |
292 | } | |
293 | -re "The program is not being run.*$gdb_prompt $" { | |
b741e217 | 294 | if { [gdb_reload] != 0 } { |
4ec70201 | 295 | return |
917317f4 | 296 | } |
4ec70201 | 297 | send_gdb "jump *$start\n" |
917317f4 JM |
298 | } |
299 | timeout { | |
4ec70201 | 300 | perror "Jump to start() failed (timeout)" |
917317f4 JM |
301 | return |
302 | } | |
c906108c | 303 | } |
c906108c | 304 | } |
c906108c SS |
305 | return |
306 | } | |
83f66e8f DJ |
307 | |
308 | if [target_info exists gdb,do_reload_on_run] { | |
b741e217 | 309 | if { [gdb_reload] != 0 } { |
4ec70201 | 310 | return |
83f66e8f DJ |
311 | } |
312 | } | |
c906108c SS |
313 | send_gdb "run $args\n" |
314 | # This doesn't work quite right yet. | |
5aa7ddc2 PM |
315 | # Use -notransfer here so that test cases (like chng-sym.exp) |
316 | # may test for additional start-up messages. | |
317 | gdb_expect 60 { | |
c906108c SS |
318 | -re "The program .* has been started already.*y or n. $" { |
319 | send_gdb "y\n" | |
320 | exp_continue | |
321 | } | |
bbb88ebf | 322 | -notransfer -re "Starting program: \[^\r\n\]*" {} |
8e46892c JK |
323 | -notransfer -re "$gdb_prompt $" { |
324 | # There is no more input expected. | |
325 | } | |
c906108c SS |
326 | } |
327 | } | |
328 | ||
b741e217 DJ |
329 | # Generic start command. Return 0 if we could start the program, -1 |
330 | # if we could not. | |
1d41d75c DE |
331 | # |
332 | # N.B. This function does not wait for gdb to return to the prompt, | |
333 | # that is the caller's responsibility. | |
b741e217 DJ |
334 | |
335 | proc gdb_start_cmd {args} { | |
e11ac3a3 | 336 | global gdb_prompt use_gdb_stub |
b741e217 | 337 | |
a25eb028 MR |
338 | foreach command [gdb_init_commands] { |
339 | send_gdb "$command\n" | |
b741e217 DJ |
340 | gdb_expect 30 { |
341 | -re "$gdb_prompt $" { } | |
342 | default { | |
4ec70201 | 343 | perror "gdb_init_command for target failed" |
ae59b1da | 344 | return -1 |
b741e217 DJ |
345 | } |
346 | } | |
347 | } | |
348 | ||
e11ac3a3 | 349 | if $use_gdb_stub { |
b741e217 DJ |
350 | return -1 |
351 | } | |
352 | ||
353 | send_gdb "start $args\n" | |
2de75e71 JB |
354 | # Use -notransfer here so that test cases (like chng-sym.exp) |
355 | # may test for additional start-up messages. | |
b741e217 DJ |
356 | gdb_expect 60 { |
357 | -re "The program .* has been started already.*y or n. $" { | |
358 | send_gdb "y\n" | |
359 | exp_continue | |
360 | } | |
b741e217 DJ |
361 | -notransfer -re "Starting program: \[^\r\n\]*" { |
362 | return 0 | |
363 | } | |
364 | } | |
365 | return -1 | |
366 | } | |
367 | ||
78a1a894 | 368 | # Set a breakpoint at FUNCTION. If there is an additional argument it is |
55cd6f92 | 369 | # a list of options; the supported options are allow-pending, temporary, |
5b7d0050 DE |
370 | # message, no-message, and passfail. |
371 | # The result is 1 for success, 0 for failure. | |
372 | # | |
373 | # Note: The handling of message vs no-message is messed up, but it's based | |
374 | # on historical usage. By default this function does not print passes, | |
375 | # only fails. | |
376 | # no-message: turns off printing of fails (and passes, but they're already off) | |
377 | # message: turns on printing of passes (and fails, but they're already on) | |
78a1a894 DJ |
378 | |
379 | proc gdb_breakpoint { function args } { | |
c906108c SS |
380 | global gdb_prompt |
381 | global decimal | |
382 | ||
78a1a894 | 383 | set pending_response n |
5b7d0050 | 384 | if {[lsearch -exact $args allow-pending] != -1} { |
78a1a894 DJ |
385 | set pending_response y |
386 | } | |
387 | ||
e48883f7 | 388 | set break_command "break" |
18ac113b | 389 | set break_message "Breakpoint" |
5b7d0050 | 390 | if {[lsearch -exact $args temporary] != -1} { |
e48883f7 | 391 | set break_command "tbreak" |
18ac113b | 392 | set break_message "Temporary breakpoint" |
e48883f7 DJ |
393 | } |
394 | ||
5b7d0050 DE |
395 | set print_pass 0 |
396 | set print_fail 1 | |
397 | set no_message_loc [lsearch -exact $args no-message] | |
398 | set message_loc [lsearch -exact $args message] | |
399 | # The last one to appear in args wins. | |
400 | if { $no_message_loc > $message_loc } { | |
401 | set print_fail 0 | |
402 | } elseif { $message_loc > $no_message_loc } { | |
403 | set print_pass 1 | |
55cd6f92 DJ |
404 | } |
405 | ||
5b7d0050 DE |
406 | set test_name "setting breakpoint at $function" |
407 | ||
e48883f7 | 408 | send_gdb "$break_command $function\n" |
c906108c SS |
409 | # The first two regexps are what we get with -g, the third is without -g. |
410 | gdb_expect 30 { | |
18ac113b AR |
411 | -re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {} |
412 | -re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {} | |
413 | -re "$break_message \[0-9\]* at .*$gdb_prompt $" {} | |
414 | -re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" { | |
78a1a894 | 415 | if {$pending_response == "n"} { |
5b7d0050 DE |
416 | if { $print_fail } { |
417 | fail $test_name | |
55cd6f92 | 418 | } |
78a1a894 DJ |
419 | return 0 |
420 | } | |
421 | } | |
9f27c604 | 422 | -re "Make breakpoint pending.*y or \\\[n\\\]. $" { |
78a1a894 | 423 | send_gdb "$pending_response\n" |
14b1a056 | 424 | exp_continue |
18fe2033 | 425 | } |
28781456 | 426 | -re "A problem internal to GDB has been detected" { |
5b7d0050 DE |
427 | if { $print_fail } { |
428 | fail "$test_name (GDB internal error)" | |
429 | } | |
28781456 JK |
430 | gdb_internal_error_resync |
431 | return 0 | |
432 | } | |
55cd6f92 | 433 | -re "$gdb_prompt $" { |
5b7d0050 DE |
434 | if { $print_fail } { |
435 | fail $test_name | |
436 | } | |
437 | return 0 | |
438 | } | |
439 | eof { | |
440 | if { $print_fail } { | |
441 | fail "$test_name (eof)" | |
55cd6f92 DJ |
442 | } |
443 | return 0 | |
444 | } | |
445 | timeout { | |
5b7d0050 DE |
446 | if { $print_fail } { |
447 | fail "$test_name (timeout)" | |
55cd6f92 DJ |
448 | } |
449 | return 0 | |
450 | } | |
c906108c | 451 | } |
5b7d0050 DE |
452 | if { $print_pass } { |
453 | pass $test_name | |
454 | } | |
ae59b1da | 455 | return 1 |
c906108c SS |
456 | } |
457 | ||
458 | # Set breakpoint at function and run gdb until it breaks there. | |
459 | # Since this is the only breakpoint that will be set, if it stops | |
460 | # at a breakpoint, we will assume it is the one we want. We can't | |
461 | # just compare to "function" because it might be a fully qualified, | |
5b7d0050 DE |
462 | # single quoted C++ function specifier. |
463 | # | |
464 | # If there are additional arguments, pass them to gdb_breakpoint. | |
465 | # We recognize no-message/message ourselves. | |
466 | # The default is no-message. | |
467 | # no-message is messed up here, like gdb_breakpoint: to preserve | |
468 | # historical usage fails are always printed by default. | |
469 | # no-message: turns off printing of fails (and passes, but they're already off) | |
470 | # message: turns on printing of passes (and fails, but they're already on) | |
c906108c | 471 | |
78a1a894 | 472 | proc runto { function args } { |
c906108c SS |
473 | global gdb_prompt |
474 | global decimal | |
475 | ||
476 | delete_breakpoints | |
477 | ||
5b7d0050 DE |
478 | # Default to "no-message". |
479 | set args "no-message $args" | |
480 | ||
481 | set print_pass 0 | |
482 | set print_fail 1 | |
483 | set no_message_loc [lsearch -exact $args no-message] | |
484 | set message_loc [lsearch -exact $args message] | |
485 | # The last one to appear in args wins. | |
486 | if { $no_message_loc > $message_loc } { | |
487 | set print_fail 0 | |
488 | } elseif { $message_loc > $no_message_loc } { | |
489 | set print_pass 1 | |
490 | } | |
491 | ||
492 | set test_name "running to $function in runto" | |
493 | ||
494 | # We need to use eval here to pass our varargs args to gdb_breakpoint | |
495 | # which is also a varargs function. | |
2c47921e DE |
496 | # But we also have to be careful because $function may have multiple |
497 | # elements, and we don't want Tcl to move the remaining elements after | |
498 | # the first to $args. That is why $function is wrapped in {}. | |
499 | if ![eval gdb_breakpoint {$function} $args] { | |
ae59b1da | 500 | return 0 |
c906108c SS |
501 | } |
502 | ||
503 | gdb_run_cmd | |
504 | ||
505 | # the "at foo.c:36" output we get with -g. | |
506 | # the "in func" output we get without -g. | |
507 | gdb_expect 30 { | |
508 | -re "Break.* at .*:$decimal.*$gdb_prompt $" { | |
5b7d0050 DE |
509 | if { $print_pass } { |
510 | pass $test_name | |
511 | } | |
c906108c SS |
512 | return 1 |
513 | } | |
514 | -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { | |
5b7d0050 DE |
515 | if { $print_pass } { |
516 | pass $test_name | |
517 | } | |
c906108c SS |
518 | return 1 |
519 | } | |
8e46892c | 520 | -re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" { |
5b7d0050 DE |
521 | if { $print_fail } { |
522 | unsupported "Non-stop mode not supported" | |
523 | } | |
8e46892c JK |
524 | return 0 |
525 | } | |
569b05a5 | 526 | -re ".*A problem internal to GDB has been detected" { |
5b7d0050 DE |
527 | if { $print_fail } { |
528 | fail "$test_name (GDB internal error)" | |
529 | } | |
569b05a5 JK |
530 | gdb_internal_error_resync |
531 | return 0 | |
532 | } | |
c906108c | 533 | -re "$gdb_prompt $" { |
5b7d0050 DE |
534 | if { $print_fail } { |
535 | fail $test_name | |
536 | } | |
c906108c SS |
537 | return 0 |
538 | } | |
72c63395 | 539 | eof { |
5b7d0050 DE |
540 | if { $print_fail } { |
541 | fail "$test_name (eof)" | |
542 | } | |
72c63395 JK |
543 | return 0 |
544 | } | |
c906108c | 545 | timeout { |
5b7d0050 DE |
546 | if { $print_fail } { |
547 | fail "$test_name (timeout)" | |
548 | } | |
c906108c SS |
549 | return 0 |
550 | } | |
551 | } | |
5b7d0050 DE |
552 | if { $print_pass } { |
553 | pass $test_name | |
554 | } | |
c906108c SS |
555 | return 1 |
556 | } | |
557 | ||
1d41d75c | 558 | # Ask gdb to run until we hit a breakpoint at main. |
c906108c | 559 | # |
1d41d75c DE |
560 | # N.B. This function deletes all existing breakpoints. |
561 | # If you don't want that, use gdb_start_cmd. | |
562 | ||
c906108c | 563 | proc runto_main { } { |
5b7d0050 | 564 | return [runto main no-message] |
c906108c SS |
565 | } |
566 | ||
4ce44c66 JM |
567 | ### Continue, and expect to hit a breakpoint. |
568 | ### Report a pass or fail, depending on whether it seems to have | |
569 | ### worked. Use NAME as part of the test name; each call to | |
570 | ### continue_to_breakpoint should use a NAME which is unique within | |
571 | ### that test file. | |
74960c60 | 572 | proc gdb_continue_to_breakpoint {name {location_pattern .*}} { |
4ce44c66 JM |
573 | global gdb_prompt |
574 | set full_name "continue to breakpoint: $name" | |
575 | ||
06d97543 | 576 | gdb_test_multiple "continue" $full_name { |
a1624241 | 577 | -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" { |
4ce44c66 JM |
578 | pass $full_name |
579 | } | |
4ce44c66 JM |
580 | } |
581 | } | |
582 | ||
583 | ||
039cf96d AC |
584 | # gdb_internal_error_resync: |
585 | # | |
586 | # Answer the questions GDB asks after it reports an internal error | |
587 | # until we get back to a GDB prompt. Decline to quit the debugging | |
588 | # session, and decline to create a core file. Return non-zero if the | |
589 | # resync succeeds. | |
590 | # | |
591 | # This procedure just answers whatever questions come up until it sees | |
592 | # a GDB prompt; it doesn't require you to have matched the input up to | |
593 | # any specific point. However, it only answers questions it sees in | |
594 | # the output itself, so if you've matched a question, you had better | |
595 | # answer it yourself before calling this. | |
596 | # | |
597 | # You can use this function thus: | |
598 | # | |
599 | # gdb_expect { | |
600 | # ... | |
601 | # -re ".*A problem internal to GDB has been detected" { | |
602 | # gdb_internal_error_resync | |
603 | # } | |
604 | # ... | |
605 | # } | |
606 | # | |
607 | proc gdb_internal_error_resync {} { | |
608 | global gdb_prompt | |
609 | ||
5b7d0050 DE |
610 | verbose -log "Resyncing due to internal error." |
611 | ||
039cf96d AC |
612 | set count 0 |
613 | while {$count < 10} { | |
614 | gdb_expect { | |
615 | -re "Quit this debugging session\\? \\(y or n\\) $" { | |
616 | send_gdb "n\n" | |
617 | incr count | |
618 | } | |
619 | -re "Create a core file of GDB\\? \\(y or n\\) $" { | |
620 | send_gdb "n\n" | |
621 | incr count | |
622 | } | |
623 | -re "$gdb_prompt $" { | |
624 | # We're resynchronized. | |
625 | return 1 | |
626 | } | |
627 | timeout { | |
628 | perror "Could not resync from internal error (timeout)" | |
629 | return 0 | |
630 | } | |
631 | } | |
632 | } | |
2b211c59 AC |
633 | perror "Could not resync from internal error (resync count exceeded)" |
634 | return 0 | |
039cf96d AC |
635 | } |
636 | ||
4ce44c66 | 637 | |
2307bd6a | 638 | # gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS |
8dbfb380 | 639 | # Send a command to gdb; test the result. |
c906108c SS |
640 | # |
641 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
642 | # this is the null string no command is sent. | |
2307bd6a DJ |
643 | # MESSAGE is a message to be printed with the built-in failure patterns |
644 | # if one of them matches. If MESSAGE is empty COMMAND will be used. | |
645 | # EXPECT_ARGUMENTS will be fed to expect in addition to the standard | |
646 | # patterns. Pattern elements will be evaluated in the caller's | |
647 | # context; action elements will be executed in the caller's context. | |
648 | # Unlike patterns for gdb_test, these patterns should generally include | |
649 | # the final newline and prompt. | |
c906108c SS |
650 | # |
651 | # Returns: | |
2307bd6a DJ |
652 | # 1 if the test failed, according to a built-in failure pattern |
653 | # 0 if only user-supplied patterns matched | |
c906108c SS |
654 | # -1 if there was an internal error. |
655 | # | |
d422fe19 AC |
656 | # You can use this function thus: |
657 | # | |
658 | # gdb_test_multiple "print foo" "test foo" { | |
659 | # -re "expected output 1" { | |
660 | # pass "print foo" | |
661 | # } | |
662 | # -re "expected output 2" { | |
663 | # fail "print foo" | |
664 | # } | |
665 | # } | |
666 | # | |
f71c18e7 PA |
667 | # Like with "expect", you can also specify the spawn id to match with |
668 | # -i "$id". Interesting spawn ids are $inferior_spawn_id and | |
669 | # $gdb_spawn_id. The former matches inferior I/O, while the latter | |
670 | # matches GDB I/O. E.g.: | |
671 | # | |
672 | # send_inferior "hello\n" | |
673 | # gdb_test_multiple "continue" "test echo" { | |
674 | # -i "$inferior_spawn_id" -re "^hello\r\nhello\r\n$" { | |
675 | # pass "got echo" | |
676 | # } | |
677 | # -i "$gdb_spawn_id" -re "Breakpoint.*$gdb_prompt $" { | |
678 | # fail "hit breakpoint" | |
679 | # } | |
680 | # } | |
681 | # | |
fda326dd | 682 | # The standard patterns, such as "Inferior exited..." and "A problem |
f71c18e7 PA |
683 | # ...", all being implicitly appended to that list. These are always |
684 | # expected from $gdb_spawn_id. IOW, callers do not need to worry | |
685 | # about resetting "-i" back to $gdb_spawn_id explicitly. | |
d422fe19 | 686 | # |
2307bd6a | 687 | proc gdb_test_multiple { command message user_code } { |
e11ac3a3 | 688 | global verbose use_gdb_stub |
c3f814a1 | 689 | global gdb_prompt pagination_prompt |
c906108c | 690 | global GDB |
f71c18e7 | 691 | global gdb_spawn_id |
fda326dd | 692 | global inferior_exited_re |
c906108c | 693 | upvar timeout timeout |
c47cebdb | 694 | upvar expect_out expect_out |
749ef8f8 | 695 | global any_spawn_id |
c906108c | 696 | |
2307bd6a DJ |
697 | if { $message == "" } { |
698 | set message $command | |
c906108c | 699 | } |
c906108c | 700 | |
824cc8dd JK |
701 | if [string match "*\[\r\n\]" $command] { |
702 | error "Invalid trailing newline in \"$message\" test" | |
703 | } | |
704 | ||
8344e389 JK |
705 | if [string match "*\[\r\n\]*" $message] { |
706 | error "Invalid newline in \"$message\" test" | |
707 | } | |
708 | ||
e11ac3a3 | 709 | if {$use_gdb_stub |
9bfee719 | 710 | && [regexp -nocase {^\s*(r|run|star|start|at|att|atta|attac|attach)\M} \ |
e11ac3a3 JK |
711 | $command]} { |
712 | error "gdbserver does not support $command without extended-remote" | |
713 | } | |
714 | ||
2307bd6a DJ |
715 | # TCL/EXPECT WART ALERT |
716 | # Expect does something very strange when it receives a single braced | |
717 | # argument. It splits it along word separators and performs substitutions. | |
718 | # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is | |
719 | # evaluated as "\[ab\]". But that's not how TCL normally works; inside a | |
720 | # double-quoted list item, "\[ab\]" is just a long way of representing | |
721 | # "[ab]", because the backslashes will be removed by lindex. | |
722 | ||
723 | # Unfortunately, there appears to be no easy way to duplicate the splitting | |
724 | # that expect will do from within TCL. And many places make use of the | |
725 | # "\[0-9\]" construct, so we need to support that; and some places make use | |
726 | # of the "[func]" construct, so we need to support that too. In order to | |
727 | # get this right we have to substitute quoted list elements differently | |
728 | # from braced list elements. | |
729 | ||
730 | # We do this roughly the same way that Expect does it. We have to use two | |
731 | # lists, because if we leave unquoted newlines in the argument to uplevel | |
732 | # they'll be treated as command separators, and if we escape newlines | |
733 | # we mangle newlines inside of command blocks. This assumes that the | |
734 | # input doesn't contain a pattern which contains actual embedded newlines | |
735 | # at this point! | |
736 | ||
737 | regsub -all {\n} ${user_code} { } subst_code | |
738 | set subst_code [uplevel list $subst_code] | |
739 | ||
740 | set processed_code "" | |
741 | set patterns "" | |
742 | set expecting_action 0 | |
21e24d21 | 743 | set expecting_arg 0 |
2307bd6a DJ |
744 | foreach item $user_code subst_item $subst_code { |
745 | if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } { | |
746 | lappend processed_code $item | |
747 | continue | |
748 | } | |
21e24d21 PA |
749 | if { $item == "-indices" || $item == "-re" || $item == "-ex" } { |
750 | lappend processed_code $item | |
751 | continue | |
752 | } | |
f71c18e7 | 753 | if { $item == "-timeout" || $item == "-i" } { |
21e24d21 PA |
754 | set expecting_arg 1 |
755 | lappend processed_code $item | |
756 | continue | |
757 | } | |
758 | if { $expecting_arg } { | |
759 | set expecting_arg 0 | |
71c0ee8c | 760 | lappend processed_code $subst_item |
2307bd6a DJ |
761 | continue |
762 | } | |
763 | if { $expecting_action } { | |
764 | lappend processed_code "uplevel [list $item]" | |
765 | set expecting_action 0 | |
766 | # Cosmetic, no effect on the list. | |
767 | append processed_code "\n" | |
768 | continue | |
769 | } | |
770 | set expecting_action 1 | |
771 | lappend processed_code $subst_item | |
772 | if {$patterns != ""} { | |
773 | append patterns "; " | |
774 | } | |
775 | append patterns "\"$subst_item\"" | |
c906108c SS |
776 | } |
777 | ||
2307bd6a DJ |
778 | # Also purely cosmetic. |
779 | regsub -all {\r} $patterns {\\r} patterns | |
780 | regsub -all {\n} $patterns {\\n} patterns | |
781 | ||
c906108c SS |
782 | if $verbose>2 then { |
783 | send_user "Sending \"$command\" to gdb\n" | |
2307bd6a | 784 | send_user "Looking to match \"$patterns\"\n" |
c906108c SS |
785 | send_user "Message is \"$message\"\n" |
786 | } | |
787 | ||
788 | set result -1 | |
4ec70201 | 789 | set string "${command}\n" |
c906108c | 790 | if { $command != "" } { |
543a9323 | 791 | set multi_line_re "\[\r\n\] *>" |
c906108c | 792 | while { "$string" != "" } { |
4ec70201 PA |
793 | set foo [string first "\n" "$string"] |
794 | set len [string length "$string"] | |
c906108c | 795 | if { $foo < [expr $len - 1] } { |
4ec70201 | 796 | set str [string range "$string" 0 $foo] |
c906108c | 797 | if { [send_gdb "$str"] != "" } { |
4ec70201 | 798 | global suppress_flag |
c906108c SS |
799 | |
800 | if { ! $suppress_flag } { | |
4ec70201 | 801 | perror "Couldn't send $command to GDB." |
c906108c | 802 | } |
4ec70201 | 803 | fail "$message" |
ae59b1da | 804 | return $result |
c906108c | 805 | } |
a0b3c4fd JM |
806 | # since we're checking if each line of the multi-line |
807 | # command are 'accepted' by GDB here, | |
808 | # we need to set -notransfer expect option so that | |
809 | # command output is not lost for pattern matching | |
810 | # - guo | |
5f279fa6 | 811 | gdb_expect 2 { |
543a9323 | 812 | -notransfer -re "$multi_line_re$" { verbose "partial: match" 3 } |
5f279fa6 | 813 | timeout { verbose "partial: timeout" 3 } |
c906108c | 814 | } |
4ec70201 | 815 | set string [string range "$string" [expr $foo + 1] end] |
543a9323 | 816 | set multi_line_re "$multi_line_re.*\[\r\n\] *>" |
c906108c | 817 | } else { |
4ec70201 | 818 | break |
c906108c SS |
819 | } |
820 | } | |
821 | if { "$string" != "" } { | |
822 | if { [send_gdb "$string"] != "" } { | |
4ec70201 | 823 | global suppress_flag |
c906108c SS |
824 | |
825 | if { ! $suppress_flag } { | |
4ec70201 | 826 | perror "Couldn't send $command to GDB." |
c906108c | 827 | } |
4ec70201 | 828 | fail "$message" |
ae59b1da | 829 | return $result |
c906108c SS |
830 | } |
831 | } | |
832 | } | |
833 | ||
2307bd6a | 834 | set code { |
9bfee719 MR |
835 | -re ".*A problem internal to GDB has been detected" { |
836 | fail "$message (GDB internal error)" | |
837 | gdb_internal_error_resync | |
28054d69 | 838 | set result -1 |
9bfee719 MR |
839 | } |
840 | -re "\\*\\*\\* DOSEXIT code.*" { | |
841 | if { $message != "" } { | |
4ec70201 | 842 | fail "$message" |
9bfee719 | 843 | } |
4ec70201 PA |
844 | gdb_suppress_entire_file "GDB died" |
845 | set result -1 | |
9bfee719 | 846 | } |
b0f4b84b DJ |
847 | } |
848 | append code $processed_code | |
849 | append code { | |
f71c18e7 PA |
850 | # Reset the spawn id, in case the processed code used -i. |
851 | -i "$gdb_spawn_id" | |
852 | ||
9bfee719 | 853 | -re "Ending remote debugging.*$gdb_prompt $" { |
c906108c SS |
854 | if ![isnative] then { |
855 | warning "Can`t communicate to remote target." | |
856 | } | |
857 | gdb_exit | |
858 | gdb_start | |
859 | set result -1 | |
860 | } | |
9bfee719 | 861 | -re "Undefined\[a-z\]* command:.*$gdb_prompt $" { |
c906108c | 862 | perror "Undefined command \"$command\"." |
9bfee719 | 863 | fail "$message" |
c906108c SS |
864 | set result 1 |
865 | } | |
9bfee719 | 866 | -re "Ambiguous command.*$gdb_prompt $" { |
c906108c | 867 | perror "\"$command\" is not a unique command name." |
9bfee719 | 868 | fail "$message" |
c906108c SS |
869 | set result 1 |
870 | } | |
9bfee719 | 871 | -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" { |
c906108c | 872 | if ![string match "" $message] then { |
ed4c619a | 873 | set errmsg "$message (the program exited)" |
c906108c | 874 | } else { |
ed4c619a | 875 | set errmsg "$command (the program exited)" |
c906108c SS |
876 | } |
877 | fail "$errmsg" | |
2307bd6a | 878 | set result -1 |
cb9a9d3e | 879 | } |
9bfee719 | 880 | -re "$inferior_exited_re normally.*$gdb_prompt $" { |
cb9a9d3e | 881 | if ![string match "" $message] then { |
ed4c619a | 882 | set errmsg "$message (the program exited)" |
cb9a9d3e | 883 | } else { |
ed4c619a | 884 | set errmsg "$command (the program exited)" |
cb9a9d3e MS |
885 | } |
886 | fail "$errmsg" | |
2307bd6a | 887 | set result -1 |
c906108c | 888 | } |
9bfee719 | 889 | -re "The program is not being run.*$gdb_prompt $" { |
c906108c | 890 | if ![string match "" $message] then { |
ed4c619a | 891 | set errmsg "$message (the program is no longer running)" |
c906108c | 892 | } else { |
ed4c619a | 893 | set errmsg "$command (the program is no longer running)" |
c906108c SS |
894 | } |
895 | fail "$errmsg" | |
2307bd6a | 896 | set result -1 |
c906108c | 897 | } |
9bfee719 | 898 | -re "\r\n$gdb_prompt $" { |
c906108c SS |
899 | if ![string match "" $message] then { |
900 | fail "$message" | |
901 | } | |
902 | set result 1 | |
903 | } | |
c3f814a1 | 904 | -re "$pagination_prompt" { |
c906108c SS |
905 | send_gdb "\n" |
906 | perror "Window too small." | |
9bfee719 | 907 | fail "$message" |
2307bd6a | 908 | set result -1 |
c906108c | 909 | } |
b598bfda | 910 | -re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " { |
c906108c | 911 | send_gdb "n\n" |
b598bfda DJ |
912 | gdb_expect -re "$gdb_prompt $" |
913 | fail "$message (got interactive prompt)" | |
914 | set result -1 | |
915 | } | |
916 | -re "\\\[0\\\] cancel\r\n\\\[1\\\] all.*\r\n> $" { | |
917 | send_gdb "0\n" | |
918 | gdb_expect -re "$gdb_prompt $" | |
919 | fail "$message (got breakpoint menu)" | |
2307bd6a | 920 | set result -1 |
c906108c | 921 | } |
749ef8f8 PA |
922 | |
923 | # Patterns below apply to any spawn id specified. | |
924 | -i $any_spawn_id | |
9bfee719 MR |
925 | eof { |
926 | perror "Process no longer exists" | |
927 | if { $message != "" } { | |
928 | fail "$message" | |
929 | } | |
930 | return -1 | |
c906108c | 931 | } |
9bfee719 | 932 | full_buffer { |
c906108c | 933 | perror "internal buffer is full." |
9bfee719 | 934 | fail "$message" |
2307bd6a | 935 | set result -1 |
c906108c SS |
936 | } |
937 | timeout { | |
938 | if ![string match "" $message] then { | |
939 | fail "$message (timeout)" | |
940 | } | |
941 | set result 1 | |
942 | } | |
943 | } | |
2307bd6a DJ |
944 | |
945 | set result 0 | |
4a40f85a | 946 | set code [catch {gdb_expect $code} string] |
04f6ecf2 | 947 | if {$code == 1} { |
4ec70201 | 948 | global errorInfo errorCode |
04f6ecf2 | 949 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string |
d6d7a51a | 950 | } elseif {$code > 1} { |
04f6ecf2 DJ |
951 | return -code $code $string |
952 | } | |
c906108c SS |
953 | return $result |
954 | } | |
2307bd6a DJ |
955 | |
956 | # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE | |
957 | # Send a command to gdb; test the result. | |
958 | # | |
959 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
960 | # this is the null string no command is sent. | |
961 | # PATTERN is the pattern to match for a PASS, and must NOT include | |
79fad5b8 SL |
962 | # the \r\n sequence immediately before the gdb prompt. This argument |
963 | # may be omitted to just match the prompt, ignoring whatever output | |
964 | # precedes it. | |
2307bd6a DJ |
965 | # MESSAGE is an optional message to be printed. If this is |
966 | # omitted, then the pass/fail messages use the command string as the | |
967 | # message. (If this is the empty string, then sometimes we don't | |
968 | # call pass or fail at all; I don't understand this at all.) | |
969 | # QUESTION is a question GDB may ask in response to COMMAND, like | |
970 | # "are you sure?" | |
971 | # RESPONSE is the response to send if QUESTION appears. | |
972 | # | |
973 | # Returns: | |
974 | # 1 if the test failed, | |
975 | # 0 if the test passes, | |
976 | # -1 if there was an internal error. | |
977 | # | |
978 | proc gdb_test { args } { | |
2307bd6a | 979 | global gdb_prompt |
2307bd6a DJ |
980 | upvar timeout timeout |
981 | ||
982 | if [llength $args]>2 then { | |
983 | set message [lindex $args 2] | |
984 | } else { | |
985 | set message [lindex $args 0] | |
986 | } | |
987 | set command [lindex $args 0] | |
988 | set pattern [lindex $args 1] | |
989 | ||
990 | if [llength $args]==5 { | |
4ec70201 PA |
991 | set question_string [lindex $args 3] |
992 | set response_string [lindex $args 4] | |
2307bd6a DJ |
993 | } else { |
994 | set question_string "^FOOBAR$" | |
995 | } | |
996 | ||
997 | return [gdb_test_multiple $command $message { | |
998 | -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" { | |
999 | if ![string match "" $message] then { | |
1000 | pass "$message" | |
1001 | } | |
1002 | } | |
1003 | -re "(${question_string})$" { | |
4ec70201 PA |
1004 | send_gdb "$response_string\n" |
1005 | exp_continue | |
2307bd6a DJ |
1006 | } |
1007 | }] | |
1008 | } | |
a7b75dfd JB |
1009 | |
1010 | # gdb_test_no_output COMMAND MESSAGE | |
1011 | # Send a command to GDB and verify that this command generated no output. | |
1012 | # | |
1013 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE | |
1014 | # parameters. If MESSAGE is ommitted, then COMMAND will be used as | |
c22decce JB |
1015 | # the message. (If MESSAGE is the empty string, then sometimes we do not |
1016 | # call pass or fail at all; I don't understand this at all.) | |
a7b75dfd JB |
1017 | |
1018 | proc gdb_test_no_output { args } { | |
1019 | global gdb_prompt | |
1020 | set command [lindex $args 0] | |
1021 | if [llength $args]>1 then { | |
1022 | set message [lindex $args 1] | |
1023 | } else { | |
1024 | set message $command | |
1025 | } | |
1026 | ||
1027 | set command_regex [string_to_regexp $command] | |
1028 | gdb_test_multiple $command $message { | |
1029 | -re "^$command_regex\r\n$gdb_prompt $" { | |
c22decce JB |
1030 | if ![string match "" $message] then { |
1031 | pass "$message" | |
1032 | } | |
a7b75dfd JB |
1033 | } |
1034 | } | |
1035 | } | |
1036 | ||
6b0ecdc2 DE |
1037 | # Send a command and then wait for a sequence of outputs. |
1038 | # This is useful when the sequence is long and contains ".*", a single | |
1039 | # regexp to match the entire output can get a timeout much easier. | |
1040 | # | |
1041 | # COMMAND is the command to send. | |
1042 | # TEST_NAME is passed to pass/fail. COMMAND is used if TEST_NAME is "". | |
1043 | # EXPECTED_OUTPUT_LIST is a list of regexps of expected output, which are | |
1044 | # processed in order, and all must be present in the output. | |
1045 | # | |
1046 | # It is unnecessary to specify ".*" at the beginning or end of any regexp, | |
1047 | # there is an implicit ".*" between each element of EXPECTED_OUTPUT_LIST. | |
1048 | # There is also an implicit ".*" between the last regexp and the gdb prompt. | |
1049 | # | |
1050 | # Like gdb_test and gdb_test_multiple, the output is expected to end with the | |
1051 | # gdb prompt, which must not be specified in EXPECTED_OUTPUT_LIST. | |
5fa290c1 DE |
1052 | # |
1053 | # Returns: | |
1054 | # 1 if the test failed, | |
1055 | # 0 if the test passes, | |
1056 | # -1 if there was an internal error. | |
6b0ecdc2 DE |
1057 | |
1058 | proc gdb_test_sequence { command test_name expected_output_list } { | |
1059 | global gdb_prompt | |
1060 | if { $test_name == "" } { | |
1061 | set test_name $command | |
1062 | } | |
1063 | lappend expected_output_list ""; # implicit ".*" before gdb prompt | |
1064 | send_gdb "$command\n" | |
5fa290c1 | 1065 | return [gdb_expect_list $test_name "$gdb_prompt $" $expected_output_list] |
6b0ecdc2 DE |
1066 | } |
1067 | ||
c906108c SS |
1068 | \f |
1069 | # Test that a command gives an error. For pass or fail, return | |
1070 | # a 1 to indicate that more tests can proceed. However a timeout | |
1071 | # is a serious error, generates a special fail message, and causes | |
1072 | # a 0 to be returned to indicate that more tests are likely to fail | |
1073 | # as well. | |
1074 | ||
1075 | proc test_print_reject { args } { | |
1076 | global gdb_prompt | |
1077 | global verbose | |
1078 | ||
1079 | if [llength $args]==2 then { | |
1080 | set expectthis [lindex $args 1] | |
1081 | } else { | |
1082 | set expectthis "should never match this bogus string" | |
1083 | } | |
1084 | set sendthis [lindex $args 0] | |
1085 | if $verbose>2 then { | |
1086 | send_user "Sending \"$sendthis\" to gdb\n" | |
1087 | send_user "Looking to match \"$expectthis\"\n" | |
1088 | } | |
1089 | send_gdb "$sendthis\n" | |
1090 | #FIXME: Should add timeout as parameter. | |
1091 | gdb_expect { | |
1092 | -re "A .* in expression.*\\.*$gdb_prompt $" { | |
1093 | pass "reject $sendthis" | |
1094 | return 1 | |
1095 | } | |
1096 | -re "Invalid syntax in expression.*$gdb_prompt $" { | |
1097 | pass "reject $sendthis" | |
1098 | return 1 | |
1099 | } | |
1100 | -re "Junk after end of expression.*$gdb_prompt $" { | |
1101 | pass "reject $sendthis" | |
1102 | return 1 | |
1103 | } | |
1104 | -re "Invalid number.*$gdb_prompt $" { | |
1105 | pass "reject $sendthis" | |
1106 | return 1 | |
1107 | } | |
1108 | -re "Invalid character constant.*$gdb_prompt $" { | |
1109 | pass "reject $sendthis" | |
1110 | return 1 | |
1111 | } | |
1112 | -re "No symbol table is loaded.*$gdb_prompt $" { | |
1113 | pass "reject $sendthis" | |
1114 | return 1 | |
1115 | } | |
1116 | -re "No symbol .* in current context.*$gdb_prompt $" { | |
1117 | pass "reject $sendthis" | |
1118 | return 1 | |
1119 | } | |
c4b7bc2b JB |
1120 | -re "Unmatched single quote.*$gdb_prompt $" { |
1121 | pass "reject $sendthis" | |
1122 | return 1 | |
1123 | } | |
1124 | -re "A character constant must contain at least one character.*$gdb_prompt $" { | |
1125 | pass "reject $sendthis" | |
1126 | return 1 | |
1127 | } | |
c906108c SS |
1128 | -re "$expectthis.*$gdb_prompt $" { |
1129 | pass "reject $sendthis" | |
1130 | return 1 | |
1131 | } | |
1132 | -re ".*$gdb_prompt $" { | |
1133 | fail "reject $sendthis" | |
1134 | return 1 | |
1135 | } | |
1136 | default { | |
1137 | fail "reject $sendthis (eof or timeout)" | |
1138 | return 0 | |
1139 | } | |
1140 | } | |
1141 | } | |
1142 | \f | |
c906108c SS |
1143 | |
1144 | # Same as gdb_test, but the second parameter is not a regexp, | |
1145 | # but a string that must match exactly. | |
1146 | ||
1147 | proc gdb_test_exact { args } { | |
1148 | upvar timeout timeout | |
1149 | ||
1150 | set command [lindex $args 0] | |
1151 | ||
1152 | # This applies a special meaning to a null string pattern. Without | |
1153 | # this, "$pattern\r\n$gdb_prompt $" will match anything, including error | |
1154 | # messages from commands that should have no output except a new | |
1155 | # prompt. With this, only results of a null string will match a null | |
1156 | # string pattern. | |
1157 | ||
1158 | set pattern [lindex $args 1] | |
1159 | if [string match $pattern ""] { | |
1160 | set pattern [string_to_regexp [lindex $args 0]] | |
1161 | } else { | |
1162 | set pattern [string_to_regexp [lindex $args 1]] | |
1163 | } | |
1164 | ||
1165 | # It is most natural to write the pattern argument with only | |
1166 | # embedded \n's, especially if you are trying to avoid Tcl quoting | |
1167 | # problems. But gdb_expect really wants to see \r\n in patterns. So | |
1168 | # transform the pattern here. First transform \r\n back to \n, in | |
1169 | # case some users of gdb_test_exact already do the right thing. | |
1170 | regsub -all "\r\n" $pattern "\n" pattern | |
1171 | regsub -all "\n" $pattern "\r\n" pattern | |
1172 | if [llength $args]==3 then { | |
1173 | set message [lindex $args 2] | |
1174 | } else { | |
1175 | set message $command | |
1176 | } | |
1177 | ||
1178 | return [gdb_test $command $pattern $message] | |
1179 | } | |
2dfb8c17 DE |
1180 | |
1181 | # Wrapper around gdb_test_multiple that looks for a list of expected | |
1182 | # output elements, but which can appear in any order. | |
1183 | # CMD is the gdb command. | |
1184 | # NAME is the name of the test. | |
1185 | # ELM_FIND_REGEXP specifies how to partition the output into elements to | |
1186 | # compare. | |
1187 | # ELM_EXTRACT_REGEXP specifies the part of ELM_FIND_REGEXP to compare. | |
1188 | # RESULT_MATCH_LIST is a list of exact matches for each expected element. | |
1189 | # All elements of RESULT_MATCH_LIST must appear for the test to pass. | |
1190 | # | |
1191 | # A typical use of ELM_FIND_REGEXP/ELM_EXTRACT_REGEXP is to extract one line | |
1192 | # of text per element and then strip trailing \r\n's. | |
1193 | # Example: | |
1194 | # gdb_test_list_exact "foo" "bar" \ | |
eec52c44 PM |
1195 | # "\[^\r\n\]+\[\r\n\]+" \ |
1196 | # "\[^\r\n\]+" \ | |
2dfb8c17 DE |
1197 | # { \ |
1198 | # {expected result 1} \ | |
1199 | # {expected result 2} \ | |
1200 | # } | |
1201 | ||
1202 | proc gdb_test_list_exact { cmd name elm_find_regexp elm_extract_regexp result_match_list } { | |
1203 | global gdb_prompt | |
1204 | ||
1205 | set matches [lsort $result_match_list] | |
1206 | set seen {} | |
1207 | gdb_test_multiple $cmd $name { | |
1208 | "$cmd\[\r\n\]" { exp_continue } | |
1209 | -re $elm_find_regexp { | |
1210 | set str $expect_out(0,string) | |
1211 | verbose -log "seen: $str" 3 | |
1212 | regexp -- $elm_extract_regexp $str elm_seen | |
1213 | verbose -log "extracted: $elm_seen" 3 | |
1214 | lappend seen $elm_seen | |
1215 | exp_continue | |
1216 | } | |
1217 | -re "$gdb_prompt $" { | |
1218 | set failed "" | |
1219 | foreach got [lsort $seen] have $matches { | |
1220 | if {![string equal $got $have]} { | |
1221 | set failed $have | |
1222 | break | |
1223 | } | |
1224 | } | |
1225 | if {[string length $failed] != 0} { | |
1226 | fail "$name ($failed not found)" | |
1227 | } else { | |
1228 | pass $name | |
1229 | } | |
1230 | } | |
1231 | } | |
1232 | } | |
188a61b4 PA |
1233 | |
1234 | # gdb_test_stdio COMMAND INFERIOR_PATTERN GDB_PATTERN MESSAGE | |
1235 | # Send a command to gdb; expect inferior and gdb output. | |
1236 | # | |
1237 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE | |
1238 | # parameters. | |
1239 | # | |
1240 | # INFERIOR_PATTERN is the pattern to match against inferior output. | |
1241 | # | |
1242 | # GDB_PATTERN is the pattern to match against gdb output, and must NOT | |
1243 | # include the \r\n sequence immediately before the gdb prompt, nor the | |
1244 | # prompt. The default is empty. | |
1245 | # | |
1246 | # Both inferior and gdb patterns must match for a PASS. | |
1247 | # | |
1248 | # If MESSAGE is ommitted, then COMMAND will be used as the message. | |
1249 | # | |
1250 | # Returns: | |
1251 | # 1 if the test failed, | |
1252 | # 0 if the test passes, | |
1253 | # -1 if there was an internal error. | |
1254 | # | |
1255 | ||
1256 | proc gdb_test_stdio {command inferior_pattern {gdb_pattern ""} {message ""}} { | |
1257 | global inferior_spawn_id gdb_spawn_id | |
1258 | global gdb_prompt | |
1259 | ||
1260 | if {$message == ""} { | |
1261 | set message $command | |
1262 | } | |
1263 | ||
1264 | set inferior_matched 0 | |
1265 | set gdb_matched 0 | |
1266 | ||
1267 | # Use an indirect spawn id list, and remove the inferior spawn id | |
1268 | # from the expected output as soon as it matches, in case | |
1269 | # $inferior_pattern happens to be a prefix of the resulting full | |
1270 | # gdb pattern below (e.g., "\r\n"). | |
1271 | global gdb_test_stdio_spawn_id_list | |
1272 | set gdb_test_stdio_spawn_id_list "$inferior_spawn_id" | |
1273 | ||
1274 | # Note that if $inferior_spawn_id and $gdb_spawn_id are different, | |
1275 | # then we may see gdb's output arriving before the inferior's | |
1276 | # output. | |
1277 | set res [gdb_test_multiple $command $message { | |
1278 | -i gdb_test_stdio_spawn_id_list -re "$inferior_pattern" { | |
1279 | set inferior_matched 1 | |
1280 | if {!$gdb_matched} { | |
1281 | set gdb_test_stdio_spawn_id_list "" | |
1282 | exp_continue | |
1283 | } | |
1284 | } | |
1285 | -i $gdb_spawn_id -re "$gdb_pattern\r\n$gdb_prompt $" { | |
1286 | set gdb_matched 1 | |
1287 | if {!$inferior_matched} { | |
1288 | exp_continue | |
1289 | } | |
1290 | } | |
1291 | }] | |
1292 | if {$res == 0} { | |
1293 | pass $message | |
1294 | } else { | |
1295 | verbose -log "inferior_matched=$inferior_matched, gdb_matched=$gdb_matched" | |
1296 | } | |
1297 | return $res | |
1298 | } | |
1299 | ||
c906108c | 1300 | \f |
bd293940 PA |
1301 | |
1302 | # Issue a PASS and return true if evaluating CONDITION in the caller's | |
1303 | # frame returns true, and issue a FAIL and return false otherwise. | |
1304 | # MESSAGE is the pass/fail message to be printed. If MESSAGE is | |
1305 | # omitted or is empty, then the pass/fail messages use the condition | |
1306 | # string as the message. | |
1307 | ||
1308 | proc gdb_assert { condition {message ""} } { | |
1309 | if { $message == ""} { | |
1310 | set message $condition | |
1311 | } | |
1312 | ||
1313 | set res [uplevel 1 expr $condition] | |
1314 | if {!$res} { | |
1315 | fail $message | |
1316 | } else { | |
1317 | pass $message | |
1318 | } | |
1319 | return $res | |
1320 | } | |
1321 | ||
c906108c SS |
1322 | proc gdb_reinitialize_dir { subdir } { |
1323 | global gdb_prompt | |
1324 | ||
1325 | if [is_remote host] { | |
ae59b1da | 1326 | return "" |
c906108c SS |
1327 | } |
1328 | send_gdb "dir\n" | |
1329 | gdb_expect 60 { | |
1330 | -re "Reinitialize source path to empty.*y or n. " { | |
1331 | send_gdb "y\n" | |
1332 | gdb_expect 60 { | |
1333 | -re "Source directories searched.*$gdb_prompt $" { | |
1334 | send_gdb "dir $subdir\n" | |
1335 | gdb_expect 60 { | |
1336 | -re "Source directories searched.*$gdb_prompt $" { | |
1337 | verbose "Dir set to $subdir" | |
1338 | } | |
1339 | -re "$gdb_prompt $" { | |
1340 | perror "Dir \"$subdir\" failed." | |
1341 | } | |
1342 | } | |
1343 | } | |
1344 | -re "$gdb_prompt $" { | |
1345 | perror "Dir \"$subdir\" failed." | |
1346 | } | |
1347 | } | |
1348 | } | |
1349 | -re "$gdb_prompt $" { | |
1350 | perror "Dir \"$subdir\" failed." | |
1351 | } | |
1352 | } | |
1353 | } | |
1354 | ||
1355 | # | |
1356 | # gdb_exit -- exit the GDB, killing the target program if necessary | |
1357 | # | |
1358 | proc default_gdb_exit {} { | |
1359 | global GDB | |
6b8ce727 | 1360 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c | 1361 | global verbose |
4ec70201 | 1362 | global gdb_spawn_id |
5e92f71a | 1363 | global inotify_log_file |
c906108c | 1364 | |
4ec70201 | 1365 | gdb_stop_suppressing_tests |
c906108c SS |
1366 | |
1367 | if ![info exists gdb_spawn_id] { | |
4ec70201 | 1368 | return |
c906108c SS |
1369 | } |
1370 | ||
6b8ce727 | 1371 | verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c | 1372 | |
5e92f71a TT |
1373 | if {[info exists inotify_log_file] && [file exists $inotify_log_file]} { |
1374 | set fd [open $inotify_log_file] | |
1375 | set data [read -nonewline $fd] | |
1376 | close $fd | |
1377 | ||
1378 | if {[string compare $data ""] != 0} { | |
1379 | warning "parallel-unsafe file creations noticed" | |
1380 | ||
1381 | # Clear the log. | |
1382 | set fd [open $inotify_log_file w] | |
1383 | close $fd | |
1384 | } | |
1385 | } | |
1386 | ||
c906108c | 1387 | if { [is_remote host] && [board_info host exists fileid] } { |
4ec70201 | 1388 | send_gdb "quit\n" |
c906108c SS |
1389 | gdb_expect 10 { |
1390 | -re "y or n" { | |
4ec70201 PA |
1391 | send_gdb "y\n" |
1392 | exp_continue | |
c906108c SS |
1393 | } |
1394 | -re "DOSEXIT code" { } | |
1395 | default { } | |
1396 | } | |
1397 | } | |
1398 | ||
1399 | if ![is_remote host] { | |
4ec70201 | 1400 | remote_close host |
c906108c SS |
1401 | } |
1402 | unset gdb_spawn_id | |
1403 | } | |
1404 | ||
3e3ffd2b | 1405 | # Load a file into the debugger. |
2db8e78e | 1406 | # The return value is 0 for success, -1 for failure. |
c906108c | 1407 | # |
2db8e78e MC |
1408 | # This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO |
1409 | # to one of these values: | |
3e3ffd2b | 1410 | # |
2db8e78e MC |
1411 | # debug file was loaded successfully and has debug information |
1412 | # nodebug file was loaded successfully and has no debug information | |
608e2dbb TT |
1413 | # lzma file was loaded, .gnu_debugdata found, but no LZMA support |
1414 | # compiled in | |
2db8e78e | 1415 | # fail file was not loaded |
c906108c | 1416 | # |
2db8e78e MC |
1417 | # I tried returning this information as part of the return value, |
1418 | # but ran into a mess because of the many re-implementations of | |
1419 | # gdb_load in config/*.exp. | |
3e3ffd2b | 1420 | # |
2db8e78e MC |
1421 | # TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use |
1422 | # this if they can get more information set. | |
3e3ffd2b | 1423 | |
c906108c | 1424 | proc gdb_file_cmd { arg } { |
3e3ffd2b | 1425 | global gdb_prompt |
c906108c | 1426 | global verbose |
c906108c | 1427 | global GDB |
b741e217 DJ |
1428 | global last_loaded_file |
1429 | ||
975531db | 1430 | # Save this for the benefit of gdbserver-support.exp. |
b741e217 | 1431 | set last_loaded_file $arg |
c906108c | 1432 | |
2db8e78e MC |
1433 | # Set whether debug info was found. |
1434 | # Default to "fail". | |
1435 | global gdb_file_cmd_debug_info | |
1436 | set gdb_file_cmd_debug_info "fail" | |
1437 | ||
c906108c | 1438 | if [is_remote host] { |
3e3ffd2b | 1439 | set arg [remote_download host $arg] |
c906108c | 1440 | if { $arg == "" } { |
2db8e78e MC |
1441 | perror "download failed" |
1442 | return -1 | |
c906108c SS |
1443 | } |
1444 | } | |
1445 | ||
4c42eaff DJ |
1446 | # The file command used to kill the remote target. For the benefit |
1447 | # of the testsuite, preserve this behavior. | |
1448 | send_gdb "kill\n" | |
1449 | gdb_expect 120 { | |
1450 | -re "Kill the program being debugged. .y or n. $" { | |
1451 | send_gdb "y\n" | |
1452 | verbose "\t\tKilling previous program being debugged" | |
1453 | exp_continue | |
1454 | } | |
1455 | -re "$gdb_prompt $" { | |
1456 | # OK. | |
1457 | } | |
1458 | } | |
1459 | ||
c906108c SS |
1460 | send_gdb "file $arg\n" |
1461 | gdb_expect 120 { | |
608e2dbb TT |
1462 | -re "Reading symbols from.*LZMA support was disabled.*done.*$gdb_prompt $" { |
1463 | verbose "\t\tLoaded $arg into $GDB; .gnu_debugdata found but no LZMA available" | |
1464 | set gdb_file_cmd_debug_info "lzma" | |
1465 | return 0 | |
1466 | } | |
3e3ffd2b | 1467 | -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" { |
975531db | 1468 | verbose "\t\tLoaded $arg into $GDB with no debugging symbols" |
2db8e78e MC |
1469 | set gdb_file_cmd_debug_info "nodebug" |
1470 | return 0 | |
3e3ffd2b | 1471 | } |
c906108c | 1472 | -re "Reading symbols from.*done.*$gdb_prompt $" { |
975531db | 1473 | verbose "\t\tLoaded $arg into $GDB" |
2db8e78e MC |
1474 | set gdb_file_cmd_debug_info "debug" |
1475 | return 0 | |
c906108c | 1476 | } |
c906108c SS |
1477 | -re "Load new symbol table from \".*\".*y or n. $" { |
1478 | send_gdb "y\n" | |
1479 | gdb_expect 120 { | |
1480 | -re "Reading symbols from.*done.*$gdb_prompt $" { | |
1481 | verbose "\t\tLoaded $arg with new symbol table into $GDB" | |
2db8e78e MC |
1482 | set gdb_file_cmd_debug_info "debug" |
1483 | return 0 | |
c906108c SS |
1484 | } |
1485 | timeout { | |
975531db | 1486 | perror "Couldn't load $arg, other program already loaded (timeout)." |
2db8e78e | 1487 | return -1 |
c906108c | 1488 | } |
975531db DE |
1489 | eof { |
1490 | perror "Couldn't load $arg, other program already loaded (eof)." | |
1491 | return -1 | |
1492 | } | |
c906108c SS |
1493 | } |
1494 | } | |
1495 | -re "No such file or directory.*$gdb_prompt $" { | |
2db8e78e MC |
1496 | perror "($arg) No such file or directory" |
1497 | return -1 | |
c906108c | 1498 | } |
04e7407c | 1499 | -re "A problem internal to GDB has been detected" { |
5b7d0050 | 1500 | fail "($arg) (GDB internal error)" |
04e7407c JK |
1501 | gdb_internal_error_resync |
1502 | return -1 | |
1503 | } | |
c906108c | 1504 | -re "$gdb_prompt $" { |
975531db | 1505 | perror "Couldn't load $arg into $GDB." |
2db8e78e | 1506 | return -1 |
c906108c SS |
1507 | } |
1508 | timeout { | |
975531db | 1509 | perror "Couldn't load $arg into $GDB (timeout)." |
2db8e78e | 1510 | return -1 |
c906108c SS |
1511 | } |
1512 | eof { | |
1513 | # This is an attempt to detect a core dump, but seems not to | |
1514 | # work. Perhaps we need to match .* followed by eof, in which | |
1515 | # gdb_expect does not seem to have a way to do that. | |
975531db | 1516 | perror "Couldn't load $arg into $GDB (eof)." |
2db8e78e | 1517 | return -1 |
c906108c SS |
1518 | } |
1519 | } | |
1520 | } | |
1521 | ||
94696ad3 PA |
1522 | # Default gdb_spawn procedure. |
1523 | ||
1524 | proc default_gdb_spawn { } { | |
1525 | global use_gdb_stub | |
c906108c | 1526 | global GDB |
6b8ce727 | 1527 | global INTERNAL_GDBFLAGS GDBFLAGS |
4ec70201 | 1528 | global gdb_spawn_id |
c906108c | 1529 | |
4ec70201 | 1530 | gdb_stop_suppressing_tests |
c906108c | 1531 | |
e11ac3a3 JK |
1532 | # Set the default value, it may be overriden later by specific testfile. |
1533 | # | |
1534 | # Use `set_board_info use_gdb_stub' for the board file to flag the inferior | |
1535 | # is already started after connecting and run/attach are not supported. | |
1536 | # This is used for the "remote" protocol. After GDB starts you should | |
1537 | # check global $use_gdb_stub instead of the board as the testfile may force | |
1538 | # a specific different target protocol itself. | |
1539 | set use_gdb_stub [target_info exists use_gdb_stub] | |
1540 | ||
6b8ce727 | 1541 | verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c SS |
1542 | |
1543 | if [info exists gdb_spawn_id] { | |
ae59b1da | 1544 | return 0 |
c906108c SS |
1545 | } |
1546 | ||
1547 | if ![is_remote host] { | |
1548 | if { [which $GDB] == 0 } then { | |
1549 | perror "$GDB does not exist." | |
1550 | exit 1 | |
1551 | } | |
1552 | } | |
4ec70201 | 1553 | set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"] |
c906108c SS |
1554 | if { $res < 0 || $res == "" } { |
1555 | perror "Spawning $GDB failed." | |
ae59b1da | 1556 | return 1 |
c906108c | 1557 | } |
717cf30c AG |
1558 | |
1559 | set gdb_spawn_id $res | |
94696ad3 PA |
1560 | return 0 |
1561 | } | |
1562 | ||
1563 | # Default gdb_start procedure. | |
1564 | ||
1565 | proc default_gdb_start { } { | |
e882ef3c | 1566 | global gdb_prompt pagination_prompt |
94696ad3 | 1567 | global gdb_spawn_id |
f71c18e7 | 1568 | global inferior_spawn_id |
94696ad3 PA |
1569 | |
1570 | if [info exists gdb_spawn_id] { | |
1571 | return 0 | |
1572 | } | |
1573 | ||
1574 | set res [gdb_spawn] | |
1575 | if { $res != 0} { | |
1576 | return $res | |
1577 | } | |
1578 | ||
f71c18e7 PA |
1579 | # Default to assuming inferior I/O is done on GDB's terminal. |
1580 | if {![info exists inferior_spawn_id]} { | |
1581 | set inferior_spawn_id $gdb_spawn_id | |
1582 | } | |
1583 | ||
94696ad3 PA |
1584 | # When running over NFS, particularly if running many simultaneous |
1585 | # tests on different hosts all using the same server, things can | |
1586 | # get really slow. Give gdb at least 3 minutes to start up. | |
e882ef3c SM |
1587 | set loop_again 1 |
1588 | while { $loop_again } { | |
1589 | set loop_again 0 | |
1590 | gdb_expect 360 { | |
1591 | -re "$pagination_prompt" { | |
1592 | verbose "Hit pagination during startup. Pressing enter to continue." | |
1593 | send_gdb "\n" | |
1594 | set loop_again 1 | |
1595 | } | |
1596 | -re "\[\r\n\]$gdb_prompt $" { | |
1597 | verbose "GDB initialized." | |
1598 | } | |
1599 | -re "$gdb_prompt $" { | |
1600 | perror "GDB never initialized." | |
1601 | unset gdb_spawn_id | |
1602 | return -1 | |
1603 | } | |
1604 | timeout { | |
1605 | perror "(timeout) GDB never initialized after 10 seconds." | |
1606 | remote_close host | |
1607 | unset gdb_spawn_id | |
1608 | return -1 | |
1609 | } | |
c906108c SS |
1610 | } |
1611 | } | |
94696ad3 | 1612 | |
c906108c SS |
1613 | # force the height to "unlimited", so no pagers get used |
1614 | ||
1615 | send_gdb "set height 0\n" | |
1616 | gdb_expect 10 { | |
1617 | -re "$gdb_prompt $" { | |
1618 | verbose "Setting height to 0." 2 | |
1619 | } | |
1620 | timeout { | |
1621 | warning "Couldn't set the height to 0" | |
1622 | } | |
1623 | } | |
1624 | # force the width to "unlimited", so no wraparound occurs | |
1625 | send_gdb "set width 0\n" | |
1626 | gdb_expect 10 { | |
1627 | -re "$gdb_prompt $" { | |
1628 | verbose "Setting width to 0." 2 | |
1629 | } | |
1630 | timeout { | |
1631 | warning "Couldn't set the width to 0." | |
1632 | } | |
1633 | } | |
ae59b1da | 1634 | return 0 |
c906108c SS |
1635 | } |
1636 | ||
717cf30c AG |
1637 | # Utility procedure to give user control of the gdb prompt in a script. It is |
1638 | # meant to be used for debugging test cases, and should not be left in the | |
1639 | # test cases code. | |
1640 | ||
1641 | proc gdb_interact { } { | |
1642 | global gdb_spawn_id | |
1643 | set spawn_id $gdb_spawn_id | |
1644 | ||
1645 | send_user "+------------------------------------------+\n" | |
1646 | send_user "| Script interrupted, you can now interact |\n" | |
1647 | send_user "| with by gdb. Type >>> to continue. |\n" | |
1648 | send_user "+------------------------------------------+\n" | |
1649 | ||
1650 | interact { | |
1651 | ">>>" return | |
1652 | } | |
1653 | } | |
1654 | ||
ec3c07fc NS |
1655 | # Examine the output of compilation to determine whether compilation |
1656 | # failed or not. If it failed determine whether it is due to missing | |
1657 | # compiler or due to compiler error. Report pass, fail or unsupported | |
1658 | # as appropriate | |
1659 | ||
1660 | proc gdb_compile_test {src output} { | |
1661 | if { $output == "" } { | |
1662 | pass "compilation [file tail $src]" | |
1663 | } elseif { [regexp {^[a-zA-Z_0-9]+: Can't find [^ ]+\.$} $output] } { | |
1664 | unsupported "compilation [file tail $src]" | |
1665 | } elseif { [regexp {.*: command not found[\r|\n]*$} $output] } { | |
1666 | unsupported "compilation [file tail $src]" | |
6bb85cd1 DE |
1667 | } elseif { [regexp {.*: [^\r\n]*compiler not installed[^\r\n]*[\r|\n]*$} $output] } { |
1668 | unsupported "compilation [file tail $src]" | |
ec3c07fc NS |
1669 | } else { |
1670 | verbose -log "compilation failed: $output" 2 | |
1671 | fail "compilation [file tail $src]" | |
1672 | } | |
1673 | } | |
1674 | ||
d4f3574e SS |
1675 | # Return a 1 for configurations for which we don't even want to try to |
1676 | # test C++. | |
1677 | ||
1678 | proc skip_cplus_tests {} { | |
d4f3574e SS |
1679 | if { [istarget "h8300-*-*"] } { |
1680 | return 1 | |
1681 | } | |
81d2cbae | 1682 | |
1146c7f1 SC |
1683 | # The C++ IO streams are too large for HC11/HC12 and are thus not |
1684 | # available. The gdb C++ tests use them and don't compile. | |
1685 | if { [istarget "m6811-*-*"] } { | |
1686 | return 1 | |
1687 | } | |
1688 | if { [istarget "m6812-*-*"] } { | |
1689 | return 1 | |
1690 | } | |
d4f3574e SS |
1691 | return 0 |
1692 | } | |
1693 | ||
759f0f0b PA |
1694 | # Return a 1 for configurations for which don't have both C++ and the STL. |
1695 | ||
1696 | proc skip_stl_tests {} { | |
1697 | # Symbian supports the C++ language, but the STL is missing | |
1698 | # (both headers and libraries). | |
1699 | if { [istarget "arm*-*-symbianelf*"] } { | |
1700 | return 1 | |
1701 | } | |
1702 | ||
1703 | return [skip_cplus_tests] | |
1704 | } | |
1705 | ||
89a237cb MC |
1706 | # Return a 1 if I don't even want to try to test FORTRAN. |
1707 | ||
1708 | proc skip_fortran_tests {} { | |
1709 | return 0 | |
1710 | } | |
1711 | ||
ec3c07fc NS |
1712 | # Return a 1 if I don't even want to try to test ada. |
1713 | ||
1714 | proc skip_ada_tests {} { | |
1715 | return 0 | |
1716 | } | |
1717 | ||
a766d390 DE |
1718 | # Return a 1 if I don't even want to try to test GO. |
1719 | ||
1720 | proc skip_go_tests {} { | |
1721 | return 0 | |
1722 | } | |
1723 | ||
ec3c07fc NS |
1724 | # Return a 1 if I don't even want to try to test java. |
1725 | ||
1726 | proc skip_java_tests {} { | |
1727 | return 0 | |
1728 | } | |
1729 | ||
7f420862 IB |
1730 | # Return a 1 if I don't even want to try to test D. |
1731 | ||
1732 | proc skip_d_tests {} { | |
1733 | return 0 | |
1734 | } | |
1735 | ||
f6bbabf0 | 1736 | # Return a 1 for configurations that do not support Python scripting. |
4d6cceb4 | 1737 | # PROMPT_REGEXP is the expected prompt. |
f6bbabf0 | 1738 | |
4d6cceb4 | 1739 | proc skip_python_tests_prompt { prompt_regexp } { |
9325cb04 PK |
1740 | global gdb_py_is_py3k |
1741 | global gdb_py_is_py24 | |
1742 | ||
1743 | gdb_test_multiple "python print ('test')" "verify python support" { | |
4d6cceb4 | 1744 | -re "not supported.*$prompt_regexp" { |
f6bbabf0 PM |
1745 | unsupported "Python support is disabled." |
1746 | return 1 | |
1747 | } | |
4d6cceb4 | 1748 | -re "$prompt_regexp" {} |
f6bbabf0 PM |
1749 | } |
1750 | ||
9325cb04 PK |
1751 | set gdb_py_is_py24 0 |
1752 | gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" { | |
4d6cceb4 | 1753 | -re "3.*$prompt_regexp" { |
9325cb04 PK |
1754 | set gdb_py_is_py3k 1 |
1755 | } | |
4d6cceb4 | 1756 | -re ".*$prompt_regexp" { |
9325cb04 PK |
1757 | set gdb_py_is_py3k 0 |
1758 | } | |
1759 | } | |
1760 | if { $gdb_py_is_py3k == 0 } { | |
1761 | gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" { | |
4d6cceb4 | 1762 | -re "\[45\].*$prompt_regexp" { |
9325cb04 PK |
1763 | set gdb_py_is_py24 1 |
1764 | } | |
4d6cceb4 | 1765 | -re ".*$prompt_regexp" { |
9325cb04 PK |
1766 | set gdb_py_is_py24 0 |
1767 | } | |
1768 | } | |
1769 | } | |
1770 | ||
f6bbabf0 PM |
1771 | return 0 |
1772 | } | |
1773 | ||
4d6cceb4 DE |
1774 | # Return a 1 for configurations that do not support Python scripting. |
1775 | # Note: This also sets various globals that specify which version of Python | |
1776 | # is in use. See skip_python_tests_prompt. | |
1777 | ||
1778 | proc skip_python_tests {} { | |
1779 | global gdb_prompt | |
1780 | return [skip_python_tests_prompt "$gdb_prompt $"] | |
1781 | } | |
1782 | ||
93f02886 DJ |
1783 | # Return a 1 if we should skip shared library tests. |
1784 | ||
1785 | proc skip_shlib_tests {} { | |
1786 | # Run the shared library tests on native systems. | |
1787 | if {[isnative]} { | |
1788 | return 0 | |
1789 | } | |
1790 | ||
1791 | # An abbreviated list of remote targets where we should be able to | |
1792 | # run shared library tests. | |
1793 | if {([istarget *-*-linux*] | |
1794 | || [istarget *-*-*bsd*] | |
1795 | || [istarget *-*-solaris2*] | |
1796 | || [istarget arm*-*-symbianelf*] | |
1797 | || [istarget *-*-mingw*] | |
1798 | || [istarget *-*-cygwin*] | |
1799 | || [istarget *-*-pe*])} { | |
1800 | return 0 | |
1801 | } | |
1802 | ||
1803 | return 1 | |
1804 | } | |
1805 | ||
ebe3b578 AB |
1806 | # Return 1 if we should skip tui related tests. |
1807 | ||
1808 | proc skip_tui_tests {} { | |
1809 | global gdb_prompt | |
1810 | ||
1811 | gdb_test_multiple "help layout" "verify tui support" { | |
1812 | -re "Undefined command: \"layout\".*$gdb_prompt $" { | |
1813 | return 1 | |
1814 | } | |
1815 | -re "$gdb_prompt $" { | |
1816 | } | |
1817 | } | |
1818 | ||
1819 | return 0 | |
1820 | } | |
1821 | ||
6a5870ce PA |
1822 | # Test files shall make sure all the test result lines in gdb.sum are |
1823 | # unique in a test run, so that comparing the gdb.sum files of two | |
1824 | # test runs gives correct results. Test files that exercise | |
1825 | # variations of the same tests more than once, shall prefix the | |
1826 | # different test invocations with different identifying strings in | |
1827 | # order to make them unique. | |
1828 | # | |
1829 | # About test prefixes: | |
1830 | # | |
1831 | # $pf_prefix is the string that dejagnu prints after the result (FAIL, | |
1832 | # PASS, etc.), and before the test message/name in gdb.sum. E.g., the | |
1833 | # underlined substring in | |
1834 | # | |
1835 | # PASS: gdb.base/mytest.exp: some test | |
1836 | # ^^^^^^^^^^^^^^^^^^^^ | |
1837 | # | |
1838 | # is $pf_prefix. | |
1839 | # | |
1840 | # The easiest way to adjust the test prefix is to append a test | |
1841 | # variation prefix to the $pf_prefix, using the with_test_prefix | |
1842 | # procedure. E.g., | |
1843 | # | |
1844 | # proc do_tests {} { | |
1845 | # gdb_test ... ... "test foo" | |
1846 | # gdb_test ... ... "test bar" | |
1847 | # | |
0f4d39d5 | 1848 | # with_test_prefix "subvariation a" { |
6a5870ce PA |
1849 | # gdb_test ... ... "test x" |
1850 | # } | |
1851 | # | |
0f4d39d5 | 1852 | # with_test_prefix "subvariation b" { |
6a5870ce PA |
1853 | # gdb_test ... ... "test x" |
1854 | # } | |
1855 | # } | |
1856 | # | |
0f4d39d5 | 1857 | # with_test_prefix "variation1" { |
6a5870ce PA |
1858 | # ...do setup for variation 1... |
1859 | # do_tests | |
1860 | # } | |
1861 | # | |
0f4d39d5 | 1862 | # with_test_prefix "variation2" { |
6a5870ce PA |
1863 | # ...do setup for variation 2... |
1864 | # do_tests | |
1865 | # } | |
1866 | # | |
1867 | # Results in: | |
1868 | # | |
1869 | # PASS: gdb.base/mytest.exp: variation1: test foo | |
1870 | # PASS: gdb.base/mytest.exp: variation1: test bar | |
1871 | # PASS: gdb.base/mytest.exp: variation1: subvariation a: test x | |
1872 | # PASS: gdb.base/mytest.exp: variation1: subvariation b: test x | |
1873 | # PASS: gdb.base/mytest.exp: variation2: test foo | |
1874 | # PASS: gdb.base/mytest.exp: variation2: test bar | |
1875 | # PASS: gdb.base/mytest.exp: variation2: subvariation a: test x | |
1876 | # PASS: gdb.base/mytest.exp: variation2: subvariation b: test x | |
1877 | # | |
1878 | # If for some reason more flexibility is necessary, one can also | |
1879 | # manipulate the pf_prefix global directly, treating it as a string. | |
1880 | # E.g., | |
1881 | # | |
1882 | # global pf_prefix | |
1883 | # set saved_pf_prefix | |
0f4d39d5 | 1884 | # append pf_prefix "${foo}: bar" |
6a5870ce PA |
1885 | # ... actual tests ... |
1886 | # set pf_prefix $saved_pf_prefix | |
1887 | # | |
1888 | ||
1889 | # Run BODY in the context of the caller, with the current test prefix | |
0f4d39d5 PA |
1890 | # (pf_prefix) appended with one space, then PREFIX, and then a colon. |
1891 | # Returns the result of BODY. | |
6a5870ce PA |
1892 | # |
1893 | proc with_test_prefix { prefix body } { | |
1894 | global pf_prefix | |
1895 | ||
1896 | set saved $pf_prefix | |
0f4d39d5 | 1897 | append pf_prefix " " $prefix ":" |
6a5870ce PA |
1898 | set code [catch {uplevel 1 $body} result] |
1899 | set pf_prefix $saved | |
1900 | ||
1901 | if {$code == 1} { | |
1902 | global errorInfo errorCode | |
1903 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
1904 | } else { | |
1905 | return -code $code $result | |
1906 | } | |
1907 | } | |
1908 | ||
f1da4b11 PA |
1909 | # Wrapper for foreach that calls with_test_prefix on each iteration, |
1910 | # including the iterator's name and current value in the prefix. | |
1911 | ||
1912 | proc foreach_with_prefix {var list body} { | |
1913 | upvar 1 $var myvar | |
1914 | foreach myvar $list { | |
1915 | with_test_prefix "$var=$myvar" { | |
1916 | uplevel 1 $body | |
1917 | } | |
1918 | } | |
1919 | } | |
1920 | ||
abe8e607 PP |
1921 | # Run BODY in the context of the caller. After BODY is run, the variables |
1922 | # listed in VARS will be reset to the values they had before BODY was run. | |
1923 | # | |
1924 | # This is useful for providing a scope in which it is safe to temporarily | |
1925 | # modify global variables, e.g. | |
1926 | # | |
1927 | # global INTERNAL_GDBFLAGS | |
1928 | # global env | |
1929 | # | |
1930 | # set foo GDBHISTSIZE | |
1931 | # | |
1932 | # save_vars { INTERNAL_GDBFLAGS env($foo) env(HOME) } { | |
1933 | # append INTERNAL_GDBFLAGS " -nx" | |
1934 | # unset -nocomplain env(GDBHISTSIZE) | |
1935 | # gdb_start | |
1936 | # gdb_test ... | |
1937 | # } | |
1938 | # | |
1939 | # Here, although INTERNAL_GDBFLAGS, env(GDBHISTSIZE) and env(HOME) may be | |
1940 | # modified inside BODY, this proc guarantees that the modifications will be | |
1941 | # undone after BODY finishes executing. | |
1942 | ||
1943 | proc save_vars { vars body } { | |
1944 | array set saved_scalars { } | |
1945 | array set saved_arrays { } | |
1946 | set unset_vars { } | |
1947 | ||
1948 | foreach var $vars { | |
1949 | # First evaluate VAR in the context of the caller in case the variable | |
1950 | # name may be a not-yet-interpolated string like env($foo) | |
1951 | set var [uplevel 1 list $var] | |
1952 | ||
1953 | if [uplevel 1 [list info exists $var]] { | |
1954 | if [uplevel 1 [list array exists $var]] { | |
1955 | set saved_arrays($var) [uplevel 1 [list array get $var]] | |
1956 | } else { | |
1957 | set saved_scalars($var) [uplevel 1 [list set $var]] | |
1958 | } | |
1959 | } else { | |
1960 | lappend unset_vars $var | |
1961 | } | |
1962 | } | |
1963 | ||
1964 | set code [catch {uplevel 1 $body} result] | |
1965 | ||
1966 | foreach {var value} [array get saved_scalars] { | |
1967 | uplevel 1 [list set $var $value] | |
1968 | } | |
1969 | ||
1970 | foreach {var value} [array get saved_arrays] { | |
1971 | uplevel 1 [list unset $var] | |
1972 | uplevel 1 [list array set $var $value] | |
1973 | } | |
1974 | ||
1975 | foreach var $unset_vars { | |
1976 | uplevel 1 [list unset -nocomplain $var] | |
1977 | } | |
1978 | ||
1979 | if {$code == 1} { | |
1980 | global errorInfo errorCode | |
1981 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
1982 | } else { | |
1983 | return -code $code $result | |
1984 | } | |
1985 | } | |
1986 | ||
1987 | ||
8b5e6dc2 YQ |
1988 | # Run tests in BODY with GDB prompt and variable $gdb_prompt set to |
1989 | # PROMPT. When BODY is finished, restore GDB prompt and variable | |
1990 | # $gdb_prompt. | |
1991 | # Returns the result of BODY. | |
3714cea7 DE |
1992 | # |
1993 | # Notes: | |
1994 | # | |
1995 | # 1) If you want to use, for example, "(foo)" as the prompt you must pass it | |
1996 | # as "(foo)", and not the regexp form "\(foo\)" (expressed as "\\(foo\\)" in | |
1997 | # TCL). PROMPT is internally converted to a suitable regexp for matching. | |
1998 | # We do the conversion from "(foo)" to "\(foo\)" here for a few reasons: | |
1999 | # a) It's more intuitive for callers to pass the plain text form. | |
2000 | # b) We need two forms of the prompt: | |
2001 | # - a regexp to use in output matching, | |
2002 | # - a value to pass to the "set prompt" command. | |
2003 | # c) It's easier to convert the plain text form to its regexp form. | |
2004 | # | |
2005 | # 2) Don't add a trailing space, we do that here. | |
8b5e6dc2 YQ |
2006 | |
2007 | proc with_gdb_prompt { prompt body } { | |
2008 | global gdb_prompt | |
2009 | ||
3714cea7 DE |
2010 | # Convert "(foo)" to "\(foo\)". |
2011 | # We don't use string_to_regexp because while it works today it's not | |
2012 | # clear it will work tomorrow: the value we need must work as both a | |
2013 | # regexp *and* as the argument to the "set prompt" command, at least until | |
2014 | # we start recording both forms separately instead of just $gdb_prompt. | |
2015 | # The testsuite is pretty-much hardwired to interpret $gdb_prompt as the | |
2016 | # regexp form. | |
2017 | regsub -all {[]*+.|()^$\[\\]} $prompt {\\&} prompt | |
2018 | ||
8b5e6dc2 YQ |
2019 | set saved $gdb_prompt |
2020 | ||
3714cea7 | 2021 | verbose -log "Setting gdb prompt to \"$prompt \"." |
8b5e6dc2 YQ |
2022 | set gdb_prompt $prompt |
2023 | gdb_test_no_output "set prompt $prompt " "" | |
2024 | ||
2025 | set code [catch {uplevel 1 $body} result] | |
2026 | ||
3714cea7 | 2027 | verbose -log "Restoring gdb prompt to \"$saved \"." |
8b5e6dc2 YQ |
2028 | set gdb_prompt $saved |
2029 | gdb_test_no_output "set prompt $saved " "" | |
2030 | ||
2031 | if {$code == 1} { | |
2032 | global errorInfo errorCode | |
2033 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2034 | } else { | |
2035 | return -code $code $result | |
2036 | } | |
2037 | } | |
2038 | ||
389b98f7 YQ |
2039 | # Run tests in BODY with target-charset setting to TARGET_CHARSET. When |
2040 | # BODY is finished, restore target-charset. | |
2041 | ||
2042 | proc with_target_charset { target_charset body } { | |
2043 | global gdb_prompt | |
2044 | ||
2045 | set saved "" | |
2046 | gdb_test_multiple "show target-charset" "" { | |
2047 | -re "The target character set is \".*; currently (.*)\"\..*$gdb_prompt " { | |
2048 | set saved $expect_out(1,string) | |
2049 | } | |
2050 | -re "The target character set is \"(.*)\".*$gdb_prompt " { | |
2051 | set saved $expect_out(1,string) | |
2052 | } | |
2053 | -re ".*$gdb_prompt " { | |
2054 | fail "get target-charset" | |
2055 | } | |
2056 | } | |
2057 | ||
2058 | gdb_test_no_output "set target-charset $target_charset" "" | |
2059 | ||
2060 | set code [catch {uplevel 1 $body} result] | |
2061 | ||
2062 | gdb_test_no_output "set target-charset $saved" "" | |
2063 | ||
2064 | if {$code == 1} { | |
2065 | global errorInfo errorCode | |
2066 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2067 | } else { | |
2068 | return -code $code $result | |
2069 | } | |
2070 | } | |
2071 | ||
45fd756c YQ |
2072 | # Select the largest timeout from all the timeouts: |
2073 | # - the local "timeout" variable of the scope two levels above, | |
2074 | # - the global "timeout" variable, | |
2075 | # - the board variable "gdb,timeout". | |
2076 | ||
2077 | proc get_largest_timeout {} { | |
2078 | upvar #0 timeout gtimeout | |
2079 | upvar 2 timeout timeout | |
2080 | ||
2081 | set tmt 0 | |
2082 | if [info exists timeout] { | |
2083 | set tmt $timeout | |
2084 | } | |
2085 | if { [info exists gtimeout] && $gtimeout > $tmt } { | |
2086 | set tmt $gtimeout | |
2087 | } | |
2088 | if { [target_info exists gdb,timeout] | |
2089 | && [target_info gdb,timeout] > $tmt } { | |
2090 | set tmt [target_info gdb,timeout] | |
2091 | } | |
2092 | if { $tmt == 0 } { | |
2093 | # Eeeeew. | |
2094 | set tmt 60 | |
2095 | } | |
2096 | ||
2097 | return $tmt | |
2098 | } | |
2099 | ||
2100 | # Run tests in BODY with timeout increased by factor of FACTOR. When | |
2101 | # BODY is finished, restore timeout. | |
2102 | ||
2103 | proc with_timeout_factor { factor body } { | |
2104 | global timeout | |
2105 | ||
2106 | set savedtimeout $timeout | |
2107 | ||
2108 | set timeout [expr [get_largest_timeout] * $factor] | |
2109 | set code [catch {uplevel 1 $body} result] | |
2110 | ||
2111 | set timeout $savedtimeout | |
2112 | if {$code == 1} { | |
2113 | global errorInfo errorCode | |
2114 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2115 | } else { | |
2116 | return -code $code $result | |
2117 | } | |
2118 | } | |
2119 | ||
e43ec454 YQ |
2120 | # Return 1 if _Complex types are supported, otherwise, return 0. |
2121 | ||
17e1c970 | 2122 | gdb_caching_proc support_complex_tests { |
e43ec454 YQ |
2123 | # Set up, compile, and execute a test program containing _Complex types. |
2124 | # Include the current process ID in the file names to prevent conflicts | |
2125 | # with invocations for multiple testsuites. | |
4e234898 TT |
2126 | set src [standard_temp_file complex[pid].c] |
2127 | set exe [standard_temp_file complex[pid].x] | |
e43ec454 | 2128 | |
11ec5965 YQ |
2129 | gdb_produce_source $src { |
2130 | int main() { | |
2131 | _Complex float cf; | |
2132 | _Complex double cd; | |
2133 | _Complex long double cld; | |
2134 | return 0; | |
2135 | } | |
2136 | } | |
e43ec454 YQ |
2137 | |
2138 | verbose "compiling testfile $src" 2 | |
2139 | set compile_flags {debug nowarnings quiet} | |
2140 | set lines [gdb_compile $src $exe executable $compile_flags] | |
2141 | file delete $src | |
2142 | file delete $exe | |
2143 | ||
2144 | if ![string match "" $lines] then { | |
2145 | verbose "testfile compilation failed, returning 0" 2 | |
17e1c970 | 2146 | set result 0 |
e43ec454 | 2147 | } else { |
17e1c970 | 2148 | set result 1 |
e43ec454 YQ |
2149 | } |
2150 | ||
17e1c970 | 2151 | return $result |
e43ec454 YQ |
2152 | } |
2153 | ||
4d7be007 YQ |
2154 | # Return 1 if GDB can get a type for siginfo from the target, otherwise |
2155 | # return 0. | |
2156 | ||
2157 | proc supports_get_siginfo_type {} { | |
5cd867b4 | 2158 | if { [istarget "*-*-linux*"] } { |
4d7be007 YQ |
2159 | return 1 |
2160 | } else { | |
2161 | return 0 | |
2162 | } | |
2163 | } | |
2164 | ||
1ed415e2 | 2165 | # Return 1 if the target supports hardware single stepping. |
ab254057 | 2166 | |
1ed415e2 | 2167 | proc can_hardware_single_step {} { |
ab254057 | 2168 | |
b0221781 | 2169 | if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"] |
b5bee914 YQ |
2170 | || [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"] |
2171 | || [istarget "nios2-*-*"] } { | |
ab254057 YQ |
2172 | return 0 |
2173 | } | |
2174 | ||
2175 | return 1 | |
2176 | } | |
2177 | ||
1ed415e2 PA |
2178 | # Return 1 if target hardware or OS supports single stepping to signal |
2179 | # handler, otherwise, return 0. | |
2180 | ||
2181 | proc can_single_step_to_signal_handler {} { | |
2182 | # Targets don't have hardware single step. On these targets, when | |
2183 | # a signal is delivered during software single step, gdb is unable | |
2184 | # to determine the next instruction addresses, because start of signal | |
2185 | # handler is one of them. | |
2186 | return [can_hardware_single_step] | |
2187 | } | |
2188 | ||
d3895d7d YQ |
2189 | # Return 1 if target supports process record, otherwise return 0. |
2190 | ||
2191 | proc supports_process_record {} { | |
2192 | ||
2193 | if [target_info exists gdb,use_precord] { | |
2194 | return [target_info gdb,use_precord] | |
2195 | } | |
2196 | ||
596662fa | 2197 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
b4cdae6f | 2198 | || [istarget "i\[34567\]86-*-linux*"] |
a81bfbd0 | 2199 | || [istarget "aarch64*-*-linux*"] |
566c56c9 MK |
2200 | || [istarget "powerpc*-*-linux*"] |
2201 | || [istarget "s390*-*-linux*"] } { | |
d3895d7d YQ |
2202 | return 1 |
2203 | } | |
2204 | ||
2205 | return 0 | |
2206 | } | |
2207 | ||
2208 | # Return 1 if target supports reverse debugging, otherwise return 0. | |
2209 | ||
2210 | proc supports_reverse {} { | |
2211 | ||
2212 | if [target_info exists gdb,can_reverse] { | |
2213 | return [target_info gdb,can_reverse] | |
2214 | } | |
2215 | ||
596662fa | 2216 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
b4cdae6f | 2217 | || [istarget "i\[34567\]86-*-linux*"] |
a81bfbd0 | 2218 | || [istarget "aarch64*-*-linux*"] |
566c56c9 MK |
2219 | || [istarget "powerpc*-*-linux*"] |
2220 | || [istarget "s390*-*-linux*"] } { | |
d3895d7d YQ |
2221 | return 1 |
2222 | } | |
2223 | ||
2224 | return 0 | |
2225 | } | |
2226 | ||
0d4d0e77 YQ |
2227 | # Return 1 if readline library is used. |
2228 | ||
2229 | proc readline_is_used { } { | |
2230 | global gdb_prompt | |
2231 | ||
2232 | gdb_test_multiple "show editing" "" { | |
2233 | -re ".*Editing of command lines as they are typed is on\..*$gdb_prompt $" { | |
2234 | return 1 | |
2235 | } | |
2236 | -re ".*$gdb_prompt $" { | |
2237 | return 0 | |
2238 | } | |
2239 | } | |
2240 | } | |
2241 | ||
e9f0e62e NB |
2242 | # Return 1 if target is ELF. |
2243 | gdb_caching_proc is_elf_target { | |
2244 | set me "is_elf_target" | |
2245 | ||
2246 | set src [standard_temp_file is_elf_target[pid].c] | |
2247 | set obj [standard_temp_file is_elf_target[pid].o] | |
2248 | ||
11ec5965 YQ |
2249 | gdb_produce_source $src { |
2250 | int foo () {return 0;} | |
2251 | } | |
e9f0e62e NB |
2252 | |
2253 | verbose "$me: compiling testfile $src" 2 | |
2254 | set lines [gdb_compile $src $obj object {quiet}] | |
2255 | ||
2256 | file delete $src | |
2257 | ||
2258 | if ![string match "" $lines] then { | |
2259 | verbose "$me: testfile compilation failed, returning 0" 2 | |
2260 | return 0 | |
2261 | } | |
2262 | ||
2263 | set fp_obj [open $obj "r"] | |
2264 | fconfigure $fp_obj -translation binary | |
2265 | set data [read $fp_obj] | |
2266 | close $fp_obj | |
2267 | ||
2268 | file delete $obj | |
2269 | ||
2270 | set ELFMAG "\u007FELF" | |
2271 | ||
2272 | if {[string compare -length 4 $data $ELFMAG] != 0} { | |
2273 | verbose "$me: returning 0" 2 | |
2274 | return 0 | |
2275 | } | |
2276 | ||
2277 | verbose "$me: returning 1" 2 | |
2278 | return 1 | |
2279 | } | |
2280 | ||
20c6f1e1 YQ |
2281 | # Return 1 if the memory at address zero is readable. |
2282 | ||
2283 | gdb_caching_proc is_address_zero_readable { | |
2284 | global gdb_prompt | |
2285 | ||
2286 | set ret 0 | |
2287 | gdb_test_multiple "x 0" "" { | |
2288 | -re "Cannot access memory at address 0x0.*$gdb_prompt $" { | |
2289 | set ret 0 | |
2290 | } | |
2291 | -re ".*$gdb_prompt $" { | |
2292 | set ret 1 | |
2293 | } | |
2294 | } | |
2295 | ||
2296 | return $ret | |
2297 | } | |
2298 | ||
6dbb6798 YQ |
2299 | # Produce source file NAME and write SOURCES into it. |
2300 | ||
2301 | proc gdb_produce_source { name sources } { | |
2302 | set index 0 | |
2303 | set f [open $name "w"] | |
2304 | ||
2305 | puts $f $sources | |
2306 | close $f | |
2307 | } | |
2308 | ||
add265ae L |
2309 | # Return 1 if target is ILP32. |
2310 | # This cannot be decided simply from looking at the target string, | |
2311 | # as it might depend on externally passed compiler options like -m64. | |
17e1c970 | 2312 | gdb_caching_proc is_ilp32_target { |
add265ae | 2313 | set me "is_ilp32_target" |
add265ae | 2314 | |
4e234898 TT |
2315 | set src [standard_temp_file ilp32[pid].c] |
2316 | set obj [standard_temp_file ilp32[pid].o] | |
add265ae | 2317 | |
11ec5965 YQ |
2318 | gdb_produce_source $src { |
2319 | int dummy[sizeof (int) == 4 | |
2320 | && sizeof (void *) == 4 | |
2321 | && sizeof (long) == 4 ? 1 : -1]; | |
2322 | } | |
add265ae L |
2323 | |
2324 | verbose "$me: compiling testfile $src" 2 | |
2325 | set lines [gdb_compile $src $obj object {quiet}] | |
2326 | file delete $src | |
2327 | file delete $obj | |
2328 | ||
2329 | if ![string match "" $lines] then { | |
2330 | verbose "$me: testfile compilation failed, returning 0" 2 | |
17e1c970 | 2331 | return 0 |
add265ae L |
2332 | } |
2333 | ||
2334 | verbose "$me: returning 1" 2 | |
17e1c970 | 2335 | return 1 |
add265ae L |
2336 | } |
2337 | ||
2338 | # Return 1 if target is LP64. | |
2339 | # This cannot be decided simply from looking at the target string, | |
2340 | # as it might depend on externally passed compiler options like -m64. | |
17e1c970 | 2341 | gdb_caching_proc is_lp64_target { |
add265ae | 2342 | set me "is_lp64_target" |
add265ae | 2343 | |
4e234898 TT |
2344 | set src [standard_temp_file lp64[pid].c] |
2345 | set obj [standard_temp_file lp64[pid].o] | |
add265ae | 2346 | |
11ec5965 YQ |
2347 | gdb_produce_source $src { |
2348 | int dummy[sizeof (int) == 4 | |
2349 | && sizeof (void *) == 8 | |
2350 | && sizeof (long) == 8 ? 1 : -1]; | |
2351 | } | |
add265ae L |
2352 | |
2353 | verbose "$me: compiling testfile $src" 2 | |
2354 | set lines [gdb_compile $src $obj object {quiet}] | |
2355 | file delete $src | |
2356 | file delete $obj | |
2357 | ||
2358 | if ![string match "" $lines] then { | |
2359 | verbose "$me: testfile compilation failed, returning 0" 2 | |
17e1c970 | 2360 | return 0 |
add265ae L |
2361 | } |
2362 | ||
2363 | verbose "$me: returning 1" 2 | |
17e1c970 | 2364 | return 1 |
add265ae L |
2365 | } |
2366 | ||
e630b974 TT |
2367 | # Return 1 if target has 64 bit addresses. |
2368 | # This cannot be decided simply from looking at the target string, | |
2369 | # as it might depend on externally passed compiler options like -m64. | |
2370 | gdb_caching_proc is_64_target { | |
2371 | set me "is_64_target" | |
2372 | ||
2373 | set src [standard_temp_file is64[pid].c] | |
2374 | set obj [standard_temp_file is64[pid].o] | |
2375 | ||
11ec5965 YQ |
2376 | gdb_produce_source $src { |
2377 | int function(void) { return 3; } | |
2378 | int dummy[sizeof (&function) == 8 ? 1 : -1]; | |
2379 | } | |
e630b974 TT |
2380 | |
2381 | verbose "$me: compiling testfile $src" 2 | |
2382 | set lines [gdb_compile $src $obj object {quiet}] | |
2383 | file delete $src | |
2384 | file delete $obj | |
2385 | ||
2386 | if ![string match "" $lines] then { | |
2387 | verbose "$me: testfile compilation failed, returning 0" 2 | |
2388 | return 0 | |
2389 | } | |
2390 | ||
2391 | verbose "$me: returning 1" 2 | |
2392 | return 1 | |
2393 | } | |
2394 | ||
7f062217 JK |
2395 | # Return 1 if target has x86_64 registers - either amd64 or x32. |
2396 | # x32 target identifies as x86_64-*-linux*, therefore it cannot be determined | |
2397 | # just from the target string. | |
17e1c970 | 2398 | gdb_caching_proc is_amd64_regs_target { |
68fb0ec0 | 2399 | if {![istarget "x86_64-*-*"] && ![istarget "i?86-*"]} { |
7f062217 JK |
2400 | return 0 |
2401 | } | |
2402 | ||
7f062217 | 2403 | set me "is_amd64_regs_target" |
7f062217 | 2404 | |
4e234898 TT |
2405 | set src [standard_temp_file reg64[pid].s] |
2406 | set obj [standard_temp_file reg64[pid].o] | |
7f062217 | 2407 | |
11ec5965 | 2408 | set list {} |
7f062217 | 2409 | foreach reg \ |
11ec5965 YQ |
2410 | {rax rbx rcx rdx rsi rdi rbp rsp r8 r9 r10 r11 r12 r13 r14 r15} { |
2411 | lappend list "\tincq %$reg" | |
2412 | } | |
2413 | gdb_produce_source $src [join $list \n] | |
7f062217 JK |
2414 | |
2415 | verbose "$me: compiling testfile $src" 2 | |
2416 | set lines [gdb_compile $src $obj object {quiet}] | |
2417 | file delete $src | |
2418 | file delete $obj | |
2419 | ||
2420 | if ![string match "" $lines] then { | |
2421 | verbose "$me: testfile compilation failed, returning 0" 2 | |
17e1c970 | 2422 | return 0 |
7f062217 JK |
2423 | } |
2424 | ||
2425 | verbose "$me: returning 1" 2 | |
17e1c970 | 2426 | return 1 |
7f062217 JK |
2427 | } |
2428 | ||
6edba76f TT |
2429 | # Return 1 if this target is an x86 or x86-64 with -m32. |
2430 | proc is_x86_like_target {} { | |
68fb0ec0 | 2431 | if {![istarget "x86_64-*-*"] && ![istarget i?86-*]} { |
6edba76f TT |
2432 | return 0 |
2433 | } | |
7f062217 | 2434 | return [expr [is_ilp32_target] && ![is_amd64_regs_target]] |
6edba76f TT |
2435 | } |
2436 | ||
9fcf688e YQ |
2437 | # Return 1 if this target is an arm or aarch32 on aarch64. |
2438 | ||
2439 | gdb_caching_proc is_aarch32_target { | |
2440 | if { [istarget "arm*-*-*"] } { | |
2441 | return 1 | |
2442 | } | |
2443 | ||
2444 | if { ![istarget "aarch64*-*-*"] } { | |
2445 | return 0 | |
2446 | } | |
2447 | ||
2448 | set me "is_aarch32_target" | |
2449 | ||
2450 | set src [standard_temp_file aarch32[pid].s] | |
2451 | set obj [standard_temp_file aarch32[pid].o] | |
2452 | ||
2453 | set list {} | |
2454 | foreach reg \ | |
2455 | {r0 r1 r2 r3} { | |
2456 | lappend list "\tmov $reg, $reg" | |
2457 | } | |
2458 | gdb_produce_source $src [join $list \n] | |
2459 | ||
2460 | verbose "$me: compiling testfile $src" 2 | |
2461 | set lines [gdb_compile $src $obj object {quiet}] | |
2462 | file delete $src | |
2463 | file delete $obj | |
2464 | ||
2465 | if ![string match "" $lines] then { | |
2466 | verbose "$me: testfile compilation failed, returning 0" 2 | |
2467 | return 0 | |
2468 | } | |
2469 | ||
2470 | verbose "$me: returning 1" 2 | |
2471 | return 1 | |
2472 | } | |
2473 | ||
4931af25 YQ |
2474 | # Return 1 if this target is an aarch64, either lp64 or ilp32. |
2475 | ||
2476 | proc is_aarch64_target {} { | |
2477 | if { ![istarget "aarch64*-*-*"] } { | |
2478 | return 0 | |
2479 | } | |
2480 | ||
2481 | return [expr ![is_aarch32_target]] | |
2482 | } | |
2483 | ||
be777e08 YQ |
2484 | # Return 1 if displaced stepping is supported on target, otherwise, return 0. |
2485 | proc support_displaced_stepping {} { | |
2486 | ||
2487 | if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] | |
2488 | || [istarget "arm*-*-linux*"] || [istarget "powerpc-*-linux*"] | |
34240514 YQ |
2489 | || [istarget "powerpc64-*-linux*"] || [istarget "s390*-*-*"] |
2490 | || [istarget "aarch64*-*-linux*"] } { | |
be777e08 YQ |
2491 | return 1 |
2492 | } | |
2493 | ||
2494 | return 0 | |
2495 | } | |
2496 | ||
3c95e6af PG |
2497 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
2498 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2499 | ||
17e1c970 | 2500 | gdb_caching_proc skip_altivec_tests { |
fda326dd | 2501 | global srcdir subdir gdb_prompt inferior_exited_re |
3c95e6af | 2502 | |
3c95e6af | 2503 | set me "skip_altivec_tests" |
3c95e6af PG |
2504 | |
2505 | # Some simulators are known to not support VMX instructions. | |
2506 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
2507 | verbose "$me: target known to not support VMX, returning 1" 2 | |
17e1c970 | 2508 | return 1 |
3c95e6af PG |
2509 | } |
2510 | ||
2511 | # Make sure we have a compiler that understands altivec. | |
fc91c6c2 | 2512 | set compile_flags {debug nowarnings} |
4c93b1db | 2513 | if [get_compiler_info] { |
3c95e6af PG |
2514 | warning "Could not get compiler info" |
2515 | return 1 | |
2516 | } | |
2517 | if [test_compiler_info gcc*] { | |
2518 | set compile_flags "$compile_flags additional_flags=-maltivec" | |
2519 | } elseif [test_compiler_info xlc*] { | |
2520 | set compile_flags "$compile_flags additional_flags=-qaltivec" | |
2521 | } else { | |
2522 | verbose "Could not compile with altivec support, returning 1" 2 | |
2523 | return 1 | |
2524 | } | |
2525 | ||
2526 | # Set up, compile, and execute a test program containing VMX instructions. | |
2527 | # Include the current process ID in the file names to prevent conflicts | |
2528 | # with invocations for multiple testsuites. | |
4e234898 TT |
2529 | set src [standard_temp_file vmx[pid].c] |
2530 | set exe [standard_temp_file vmx[pid].x] | |
3c95e6af | 2531 | |
11ec5965 YQ |
2532 | gdb_produce_source $src { |
2533 | int main() { | |
2534 | #ifdef __MACH__ | |
2535 | asm volatile ("vor v0,v0,v0"); | |
2536 | #else | |
2537 | asm volatile ("vor 0,0,0"); | |
2538 | #endif | |
2539 | return 0; | |
2540 | } | |
2541 | } | |
3c95e6af PG |
2542 | |
2543 | verbose "$me: compiling testfile $src" 2 | |
2544 | set lines [gdb_compile $src $exe executable $compile_flags] | |
2545 | file delete $src | |
2546 | ||
2547 | if ![string match "" $lines] then { | |
2548 | verbose "$me: testfile compilation failed, returning 1" 2 | |
17e1c970 | 2549 | return 1 |
3c95e6af PG |
2550 | } |
2551 | ||
2552 | # No error message, compilation succeeded so now run it via gdb. | |
2553 | ||
2554 | gdb_exit | |
2555 | gdb_start | |
2556 | gdb_reinitialize_dir $srcdir/$subdir | |
2557 | gdb_load "$exe" | |
2558 | gdb_run_cmd | |
2559 | gdb_expect { | |
2560 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2561 | verbose -log "\n$me altivec hardware not detected" | |
17e1c970 | 2562 | set skip_vmx_tests 1 |
3c95e6af | 2563 | } |
fda326dd | 2564 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
3c95e6af | 2565 | verbose -log "\n$me: altivec hardware detected" |
17e1c970 | 2566 | set skip_vmx_tests 0 |
3c95e6af PG |
2567 | } |
2568 | default { | |
2569 | warning "\n$me: default case taken" | |
17e1c970 | 2570 | set skip_vmx_tests 1 |
3c95e6af PG |
2571 | } |
2572 | } | |
2573 | gdb_exit | |
2574 | remote_file build delete $exe | |
2575 | ||
17e1c970 TT |
2576 | verbose "$me: returning $skip_vmx_tests" 2 |
2577 | return $skip_vmx_tests | |
3c95e6af PG |
2578 | } |
2579 | ||
604c2f83 LM |
2580 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
2581 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2582 | ||
17e1c970 | 2583 | gdb_caching_proc skip_vsx_tests { |
fda326dd | 2584 | global srcdir subdir gdb_prompt inferior_exited_re |
604c2f83 | 2585 | |
604c2f83 | 2586 | set me "skip_vsx_tests" |
604c2f83 LM |
2587 | |
2588 | # Some simulators are known to not support Altivec instructions, so | |
2589 | # they won't support VSX instructions as well. | |
2590 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
2591 | verbose "$me: target known to not support VSX, returning 1" 2 | |
17e1c970 | 2592 | return 1 |
604c2f83 LM |
2593 | } |
2594 | ||
2595 | # Make sure we have a compiler that understands altivec. | |
2596 | set compile_flags {debug nowarnings quiet} | |
4c93b1db | 2597 | if [get_compiler_info] { |
604c2f83 LM |
2598 | warning "Could not get compiler info" |
2599 | return 1 | |
2600 | } | |
2601 | if [test_compiler_info gcc*] { | |
2602 | set compile_flags "$compile_flags additional_flags=-mvsx" | |
2603 | } elseif [test_compiler_info xlc*] { | |
d9492458 | 2604 | set compile_flags "$compile_flags additional_flags=-qasm=gcc" |
604c2f83 LM |
2605 | } else { |
2606 | verbose "Could not compile with vsx support, returning 1" 2 | |
2607 | return 1 | |
2608 | } | |
2609 | ||
4e234898 TT |
2610 | set src [standard_temp_file vsx[pid].c] |
2611 | set exe [standard_temp_file vsx[pid].x] | |
604c2f83 | 2612 | |
11ec5965 YQ |
2613 | gdb_produce_source $src { |
2614 | int main() { | |
2615 | double a[2] = { 1.0, 2.0 }; | |
2616 | #ifdef __MACH__ | |
2617 | asm volatile ("lxvd2x v0,v0,%[addr]" : : [addr] "r" (a)); | |
2618 | #else | |
2619 | asm volatile ("lxvd2x 0,0,%[addr]" : : [addr] "r" (a)); | |
2620 | #endif | |
2621 | return 0; | |
2622 | } | |
2623 | } | |
604c2f83 LM |
2624 | |
2625 | verbose "$me: compiling testfile $src" 2 | |
2626 | set lines [gdb_compile $src $exe executable $compile_flags] | |
2627 | file delete $src | |
2628 | ||
2629 | if ![string match "" $lines] then { | |
2630 | verbose "$me: testfile compilation failed, returning 1" 2 | |
17e1c970 | 2631 | return 1 |
604c2f83 LM |
2632 | } |
2633 | ||
2634 | # No error message, compilation succeeded so now run it via gdb. | |
2635 | ||
2636 | gdb_exit | |
2637 | gdb_start | |
2638 | gdb_reinitialize_dir $srcdir/$subdir | |
2639 | gdb_load "$exe" | |
2640 | gdb_run_cmd | |
2641 | gdb_expect { | |
2642 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2643 | verbose -log "\n$me VSX hardware not detected" | |
17e1c970 | 2644 | set skip_vsx_tests 1 |
604c2f83 | 2645 | } |
fda326dd | 2646 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
604c2f83 | 2647 | verbose -log "\n$me: VSX hardware detected" |
17e1c970 | 2648 | set skip_vsx_tests 0 |
604c2f83 LM |
2649 | } |
2650 | default { | |
2651 | warning "\n$me: default case taken" | |
17e1c970 | 2652 | set skip_vsx_tests 1 |
604c2f83 LM |
2653 | } |
2654 | } | |
2655 | gdb_exit | |
2656 | remote_file build delete $exe | |
2657 | ||
17e1c970 TT |
2658 | verbose "$me: returning $skip_vsx_tests" 2 |
2659 | return $skip_vsx_tests | |
604c2f83 LM |
2660 | } |
2661 | ||
da8c46d2 MM |
2662 | # Run a test on the target to see if it supports TSX hardware. Return 0 if so, |
2663 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2664 | ||
2665 | gdb_caching_proc skip_tsx_tests { | |
2666 | global srcdir subdir gdb_prompt inferior_exited_re | |
2667 | ||
2668 | set me "skip_tsx_tests" | |
2669 | ||
2670 | set src [standard_temp_file tsx[pid].c] | |
2671 | set exe [standard_temp_file tsx[pid].x] | |
2672 | ||
2673 | gdb_produce_source $src { | |
2674 | int main() { | |
2675 | asm volatile ("xbegin .L0"); | |
2676 | asm volatile ("xend"); | |
2677 | asm volatile (".L0: nop"); | |
2678 | return 0; | |
2679 | } | |
2680 | } | |
2681 | ||
2682 | verbose "$me: compiling testfile $src" 2 | |
2683 | set lines [gdb_compile $src $exe executable {nowarnings quiet}] | |
2684 | file delete $src | |
2685 | ||
2686 | if ![string match "" $lines] then { | |
2687 | verbose "$me: testfile compilation failed." 2 | |
2688 | return 1 | |
2689 | } | |
2690 | ||
2691 | # No error message, compilation succeeded so now run it via gdb. | |
2692 | ||
2693 | gdb_exit | |
2694 | gdb_start | |
2695 | gdb_reinitialize_dir $srcdir/$subdir | |
2696 | gdb_load "$exe" | |
2697 | gdb_run_cmd | |
2698 | gdb_expect { | |
2699 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2700 | verbose -log "$me: TSX hardware not detected." | |
2701 | set skip_tsx_tests 1 | |
2702 | } | |
2703 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { | |
2704 | verbose -log "$me: TSX hardware detected." | |
2705 | set skip_tsx_tests 0 | |
2706 | } | |
2707 | default { | |
2708 | warning "\n$me: default case taken." | |
2709 | set skip_tsx_tests 1 | |
2710 | } | |
2711 | } | |
2712 | gdb_exit | |
2713 | remote_file build delete $exe | |
2714 | ||
2715 | verbose "$me: returning $skip_tsx_tests" 2 | |
2716 | return $skip_tsx_tests | |
2717 | } | |
2718 | ||
2f1d9bdd MM |
2719 | # Run a test on the target to see if it supports btrace hardware. Return 0 if so, |
2720 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2721 | ||
f3a76454 | 2722 | gdb_caching_proc skip_btrace_tests { |
2f1d9bdd MM |
2723 | global srcdir subdir gdb_prompt inferior_exited_re |
2724 | ||
2f1d9bdd | 2725 | set me "skip_btrace_tests" |
2f1d9bdd MM |
2726 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { |
2727 | verbose "$me: target does not support btrace, returning 1" 2 | |
f3a76454 | 2728 | return 1 |
2f1d9bdd MM |
2729 | } |
2730 | ||
2731 | # Set up, compile, and execute a test program. | |
2732 | # Include the current process ID in the file names to prevent conflicts | |
2733 | # with invocations for multiple testsuites. | |
f3a76454 TT |
2734 | set src [standard_temp_file btrace[pid].c] |
2735 | set exe [standard_temp_file btrace[pid].x] | |
2f1d9bdd | 2736 | |
11ec5965 YQ |
2737 | gdb_produce_source $src { |
2738 | int main(void) { return 0; } | |
2739 | } | |
2f1d9bdd MM |
2740 | |
2741 | verbose "$me: compiling testfile $src" 2 | |
2742 | set compile_flags {debug nowarnings quiet} | |
2743 | set lines [gdb_compile $src $exe executable $compile_flags] | |
2f1d9bdd MM |
2744 | |
2745 | if ![string match "" $lines] then { | |
2746 | verbose "$me: testfile compilation failed, returning 1" 2 | |
4043f22b | 2747 | file delete $src |
f3a76454 | 2748 | return 1 |
2f1d9bdd MM |
2749 | } |
2750 | ||
2751 | # No error message, compilation succeeded so now run it via gdb. | |
2752 | ||
f3a76454 TT |
2753 | gdb_exit |
2754 | gdb_start | |
2755 | gdb_reinitialize_dir $srcdir/$subdir | |
2756 | gdb_load $exe | |
2f1d9bdd | 2757 | if ![runto_main] { |
4043f22b | 2758 | file delete $src |
f3a76454 | 2759 | return 1 |
2f1d9bdd | 2760 | } |
4043f22b | 2761 | file delete $src |
2f1d9bdd | 2762 | # In case of an unexpected output, we return 2 as a fail value. |
f3a76454 | 2763 | set skip_btrace_tests 2 |
2f1d9bdd MM |
2764 | gdb_test_multiple "record btrace" "check btrace support" { |
2765 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { | |
f3a76454 | 2766 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2767 | } |
2768 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { | |
f3a76454 | 2769 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2770 | } |
2771 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { | |
f3a76454 | 2772 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2773 | } |
2774 | -re "^record btrace\r\n$gdb_prompt $" { | |
f3a76454 | 2775 | set skip_btrace_tests 0 |
2f1d9bdd MM |
2776 | } |
2777 | } | |
2778 | gdb_exit | |
2779 | remote_file build delete $exe | |
2780 | ||
f3a76454 TT |
2781 | verbose "$me: returning $skip_btrace_tests" 2 |
2782 | return $skip_btrace_tests | |
2f1d9bdd MM |
2783 | } |
2784 | ||
da8c46d2 MM |
2785 | # Run a test on the target to see if it supports btrace pt hardware. |
2786 | # Return 0 if so, 1 if it does not. Based on 'check_vmx_hw_available' | |
2787 | # from the GCC testsuite. | |
2788 | ||
2789 | gdb_caching_proc skip_btrace_pt_tests { | |
2790 | global srcdir subdir gdb_prompt inferior_exited_re | |
2791 | ||
2792 | set me "skip_btrace_tests" | |
2793 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { | |
2794 | verbose "$me: target does not support btrace, returning 1" 2 | |
2795 | return 1 | |
2796 | } | |
2797 | ||
2798 | # Set up, compile, and execute a test program. | |
2799 | # Include the current process ID in the file names to prevent conflicts | |
2800 | # with invocations for multiple testsuites. | |
2801 | set src [standard_temp_file btrace[pid].c] | |
2802 | set exe [standard_temp_file btrace[pid].x] | |
2803 | ||
2804 | gdb_produce_source $src { | |
2805 | int main(void) { return 0; } | |
2806 | } | |
2807 | ||
2808 | verbose "$me: compiling testfile $src" 2 | |
2809 | set compile_flags {debug nowarnings quiet} | |
2810 | set lines [gdb_compile $src $exe executable $compile_flags] | |
2811 | ||
2812 | if ![string match "" $lines] then { | |
2813 | verbose "$me: testfile compilation failed, returning 1" 2 | |
2814 | file delete $src | |
2815 | return 1 | |
2816 | } | |
2817 | ||
2818 | # No error message, compilation succeeded so now run it via gdb. | |
2819 | ||
2820 | gdb_exit | |
2821 | gdb_start | |
2822 | gdb_reinitialize_dir $srcdir/$subdir | |
2823 | gdb_load $exe | |
2824 | if ![runto_main] { | |
2825 | file delete $src | |
2826 | return 1 | |
2827 | } | |
2828 | file delete $src | |
2829 | # In case of an unexpected output, we return 2 as a fail value. | |
2830 | set skip_btrace_tests 2 | |
2831 | gdb_test_multiple "record btrace pt" "check btrace support" { | |
2832 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { | |
2833 | set skip_btrace_tests 1 | |
2834 | } | |
2835 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { | |
2836 | set skip_btrace_tests 1 | |
2837 | } | |
2838 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { | |
2839 | set skip_btrace_tests 1 | |
2840 | } | |
46a3515b MM |
2841 | -re "GDB does not support.*\r\n$gdb_prompt $" { |
2842 | set skip_btrace_tests 1 | |
2843 | } | |
da8c46d2 MM |
2844 | -re "^record btrace pt\r\n$gdb_prompt $" { |
2845 | set skip_btrace_tests 0 | |
2846 | } | |
2847 | } | |
2848 | gdb_exit | |
2849 | remote_file build delete $exe | |
2850 | ||
2851 | verbose "$me: returning $skip_btrace_tests" 2 | |
2852 | return $skip_btrace_tests | |
2853 | } | |
2854 | ||
edb3359d DJ |
2855 | # Return whether we should skip tests for showing inlined functions in |
2856 | # backtraces. Requires get_compiler_info and get_debug_format. | |
2857 | ||
2858 | proc skip_inline_frame_tests {} { | |
2859 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
2860 | if { ! [test_debug_format "DWARF 2"] } { | |
2861 | return 1 | |
2862 | } | |
2863 | ||
2864 | # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line. | |
2865 | if { ([test_compiler_info "gcc-2-*"] | |
2866 | || [test_compiler_info "gcc-3-*"] | |
2867 | || [test_compiler_info "gcc-4-0-*"]) } { | |
2868 | return 1 | |
2869 | } | |
2870 | ||
2871 | return 0 | |
2872 | } | |
2873 | ||
2874 | # Return whether we should skip tests for showing variables from | |
2875 | # inlined functions. Requires get_compiler_info and get_debug_format. | |
2876 | ||
2877 | proc skip_inline_var_tests {} { | |
2878 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
2879 | if { ! [test_debug_format "DWARF 2"] } { | |
2880 | return 1 | |
2881 | } | |
2882 | ||
2883 | return 0 | |
2884 | } | |
2885 | ||
b800ec70 UW |
2886 | # Return a 1 if we should skip tests that require hardware breakpoints |
2887 | ||
2888 | proc skip_hw_breakpoint_tests {} { | |
2889 | # Skip tests if requested by the board (note that no_hardware_watchpoints | |
2890 | # disables both watchpoints and breakpoints) | |
2891 | if { [target_info exists gdb,no_hardware_watchpoints]} { | |
2892 | return 1 | |
2893 | } | |
2894 | ||
2895 | # These targets support hardware breakpoints natively | |
2896 | if { [istarget "i?86-*-*"] | |
2897 | || [istarget "x86_64-*-*"] | |
e3039479 | 2898 | || [istarget "ia64-*-*"] |
52042a00 YQ |
2899 | || [istarget "arm*-*-*"] |
2900 | || [istarget "aarch64*-*-*"]} { | |
b800ec70 UW |
2901 | return 0 |
2902 | } | |
2903 | ||
2904 | return 1 | |
2905 | } | |
2906 | ||
2907 | # Return a 1 if we should skip tests that require hardware watchpoints | |
2908 | ||
2909 | proc skip_hw_watchpoint_tests {} { | |
2910 | # Skip tests if requested by the board | |
2911 | if { [target_info exists gdb,no_hardware_watchpoints]} { | |
2912 | return 1 | |
2913 | } | |
2914 | ||
2915 | # These targets support hardware watchpoints natively | |
2916 | if { [istarget "i?86-*-*"] | |
2917 | || [istarget "x86_64-*-*"] | |
2918 | || [istarget "ia64-*-*"] | |
e3039479 | 2919 | || [istarget "arm*-*-*"] |
52042a00 | 2920 | || [istarget "aarch64*-*-*"] |
b800ec70 UW |
2921 | || [istarget "powerpc*-*-linux*"] |
2922 | || [istarget "s390*-*-*"] } { | |
2923 | return 0 | |
2924 | } | |
2925 | ||
2926 | return 1 | |
2927 | } | |
2928 | ||
2929 | # Return a 1 if we should skip tests that require *multiple* hardware | |
2930 | # watchpoints to be active at the same time | |
2931 | ||
2932 | proc skip_hw_watchpoint_multi_tests {} { | |
2933 | if { [skip_hw_watchpoint_tests] } { | |
2934 | return 1 | |
2935 | } | |
2936 | ||
2937 | # These targets support just a single hardware watchpoint | |
e3039479 UW |
2938 | if { [istarget "arm*-*-*"] |
2939 | || [istarget "powerpc*-*-linux*"] } { | |
b800ec70 UW |
2940 | return 1 |
2941 | } | |
2942 | ||
2943 | return 0 | |
2944 | } | |
2945 | ||
2946 | # Return a 1 if we should skip tests that require read/access watchpoints | |
2947 | ||
2948 | proc skip_hw_watchpoint_access_tests {} { | |
2949 | if { [skip_hw_watchpoint_tests] } { | |
2950 | return 1 | |
2951 | } | |
2952 | ||
2953 | # These targets support just write watchpoints | |
2954 | if { [istarget "s390*-*-*"] } { | |
2955 | return 1 | |
2956 | } | |
2957 | ||
2958 | return 0 | |
2959 | } | |
2960 | ||
b4893d48 TT |
2961 | # Return 1 if we should skip tests that require the runtime unwinder |
2962 | # hook. This must be invoked while gdb is running, after shared | |
2963 | # libraries have been loaded. This is needed because otherwise a | |
2964 | # shared libgcc won't be visible. | |
2965 | ||
2966 | proc skip_unwinder_tests {} { | |
2967 | global gdb_prompt | |
2968 | ||
4442ada7 | 2969 | set ok 0 |
b4893d48 TT |
2970 | gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" { |
2971 | -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" { | |
b4893d48 TT |
2972 | } |
2973 | -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" { | |
4442ada7 | 2974 | set ok 1 |
b4893d48 TT |
2975 | } |
2976 | -re "No symbol .* in current context.\r\n$gdb_prompt $" { | |
b4893d48 TT |
2977 | } |
2978 | } | |
2979 | if {!$ok} { | |
2980 | gdb_test_multiple "info probe" "check for stap probe in unwinder" { | |
2981 | -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" { | |
b4893d48 TT |
2982 | set ok 1 |
2983 | } | |
2984 | -re "\r\n$gdb_prompt $" { | |
2985 | } | |
2986 | } | |
2987 | } | |
2988 | return $ok | |
2989 | } | |
2990 | ||
72f1fe8a TT |
2991 | # Return 0 if we should skip tests that require the libstdc++ stap |
2992 | # probes. This must be invoked while gdb is running, after shared | |
2993 | # libraries have been loaded. | |
2994 | ||
2995 | proc skip_libstdcxx_probe_tests {} { | |
2996 | global gdb_prompt | |
2997 | ||
2998 | set ok 0 | |
2999 | gdb_test_multiple "info probe" "check for stap probe in libstdc++" { | |
3000 | -re ".*libstdcxx.*catch.*\r\n$gdb_prompt $" { | |
3001 | set ok 1 | |
3002 | } | |
3003 | -re "\r\n$gdb_prompt $" { | |
3004 | } | |
3005 | } | |
3006 | return $ok | |
3007 | } | |
3008 | ||
bb2ec1b3 TT |
3009 | # Return 1 if we should skip tests of the "compile" feature. |
3010 | # This must be invoked after the inferior has been started. | |
3011 | ||
3012 | proc skip_compile_feature_tests {} { | |
3013 | global gdb_prompt | |
3014 | ||
3015 | set result 0 | |
3016 | gdb_test_multiple "compile code -- ;" "check for working compile command" { | |
3017 | "Could not load libcc1.*\r\n$gdb_prompt $" { | |
3018 | set result 1 | |
3019 | } | |
1bc1068a JK |
3020 | -re "Command not supported on this host\\..*\r\n$gdb_prompt $" { |
3021 | set result 1 | |
3022 | } | |
bb2ec1b3 TT |
3023 | -re "\r\n$gdb_prompt $" { |
3024 | } | |
3025 | } | |
3026 | return $result | |
3027 | } | |
3028 | ||
f015c27b PA |
3029 | # Helper for gdb_is_target_remote. PROMPT_REGEXP is the expected |
3030 | # prompt. | |
076855f9 | 3031 | |
f015c27b | 3032 | proc gdb_is_target_remote_prompt { prompt_regexp } { |
076855f9 PA |
3033 | |
3034 | set test "probe for target remote" | |
3035 | gdb_test_multiple "maint print target-stack" $test { | |
f015c27b | 3036 | -re ".*emote serial target in gdb-specific protocol.*$prompt_regexp" { |
076855f9 PA |
3037 | pass $test |
3038 | return 1 | |
3039 | } | |
f015c27b | 3040 | -re "$prompt_regexp" { |
076855f9 PA |
3041 | pass $test |
3042 | } | |
3043 | } | |
3044 | return 0 | |
3045 | } | |
3046 | ||
f015c27b PA |
3047 | # Check whether we're testing with the remote or extended-remote |
3048 | # targets. | |
3049 | ||
3050 | proc gdb_is_target_remote {} { | |
3051 | global gdb_prompt | |
3052 | ||
3053 | return [gdb_is_target_remote_prompt "$gdb_prompt $"] | |
3054 | } | |
3055 | ||
0a46d518 SM |
3056 | # Return 1 if the current remote target is an instance of our GDBserver, 0 |
3057 | # otherwise. Return -1 if there was an error and we can't tell. | |
3058 | ||
3059 | gdb_caching_proc target_is_gdbserver { | |
3060 | global gdb_prompt | |
3061 | ||
3062 | set is_gdbserver -1 | |
3063 | set test "Probing for GDBserver" | |
3064 | ||
3065 | gdb_test_multiple "monitor help" $test { | |
3066 | -re "The following monitor commands are supported.*Quit GDBserver.*$gdb_prompt $" { | |
3067 | set is_gdbserver 1 | |
3068 | } | |
3069 | -re "$gdb_prompt $" { | |
3070 | set is_gdbserver 0 | |
3071 | } | |
3072 | } | |
3073 | ||
3074 | if { $is_gdbserver == -1 } { | |
3075 | verbose -log "Unable to tell whether we are using GDBserver or not." | |
3076 | } | |
3077 | ||
3078 | return $is_gdbserver | |
3079 | } | |
3080 | ||
a97b16b8 DE |
3081 | # N.B. compiler_info is intended to be local to this file. |
3082 | # Call test_compiler_info with no arguments to fetch its value. | |
3083 | # Yes, this is counterintuitive when there's get_compiler_info, | |
3084 | # but that's the current API. | |
3085 | if [info exists compiler_info] { | |
3086 | unset compiler_info | |
3087 | } | |
3088 | ||
94b8e876 | 3089 | set gcc_compiled 0 |
94b8e876 MC |
3090 | |
3091 | # Figure out what compiler I am using. | |
a97b16b8 | 3092 | # The result is cached so only the first invocation runs the compiler. |
94b8e876 | 3093 | # |
4c93b1db | 3094 | # ARG can be empty or "C++". If empty, "C" is assumed. |
94b8e876 MC |
3095 | # |
3096 | # There are several ways to do this, with various problems. | |
3097 | # | |
3098 | # [ gdb_compile -E $ifile -o $binfile.ci ] | |
3099 | # source $binfile.ci | |
3100 | # | |
3101 | # Single Unix Spec v3 says that "-E -o ..." together are not | |
3102 | # specified. And in fact, the native compiler on hp-ux 11 (among | |
3103 | # others) does not work with "-E -o ...". Most targets used to do | |
3104 | # this, and it mostly worked, because it works with gcc. | |
3105 | # | |
3106 | # [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ] | |
3107 | # source $binfile.ci | |
3108 | # | |
3109 | # This avoids the problem with -E and -o together. This almost works | |
3110 | # if the build machine is the same as the host machine, which is | |
3111 | # usually true of the targets which are not gcc. But this code does | |
3112 | # not figure which compiler to call, and it always ends up using the C | |
3831839c PA |
3113 | # compiler. Not good for setting hp_aCC_compiler. Target |
3114 | # hppa*-*-hpux* used to do this. | |
94b8e876 MC |
3115 | # |
3116 | # [ gdb_compile -E $ifile > $binfile.ci ] | |
3117 | # source $binfile.ci | |
3118 | # | |
3119 | # dejagnu target_compile says that it supports output redirection, | |
3120 | # but the code is completely different from the normal path and I | |
3121 | # don't want to sweep the mines from that path. So I didn't even try | |
3122 | # this. | |
3123 | # | |
3124 | # set cppout [ gdb_compile $ifile "" preprocess $args quiet ] | |
3125 | # eval $cppout | |
3126 | # | |
3127 | # I actually do this for all targets now. gdb_compile runs the right | |
3128 | # compiler, and TCL captures the output, and I eval the output. | |
3129 | # | |
3130 | # Unfortunately, expect logs the output of the command as it goes by, | |
3131 | # and dejagnu helpfully prints a second copy of it right afterwards. | |
3132 | # So I turn off expect logging for a moment. | |
3133 | # | |
3134 | # [ gdb_compile $ifile $ciexe_file executable $args ] | |
3135 | # [ remote_exec $ciexe_file ] | |
3136 | # [ source $ci_file.out ] | |
3137 | # | |
3138 | # I could give up on -E and just do this. | |
3139 | # I didn't get desperate enough to try this. | |
3140 | # | |
3141 | # -- chastain 2004-01-06 | |
853d6e5b | 3142 | |
4c93b1db | 3143 | proc get_compiler_info {{arg ""}} { |
94b8e876 | 3144 | # For compiler.c and compiler.cc |
c906108c | 3145 | global srcdir |
94b8e876 MC |
3146 | |
3147 | # I am going to play with the log to keep noise out. | |
3148 | global outdir | |
3149 | global tool | |
3150 | ||
3151 | # These come from compiler.c or compiler.cc | |
853d6e5b | 3152 | global compiler_info |
4f70a4c9 MC |
3153 | |
3154 | # Legacy global data symbols. | |
94b8e876 | 3155 | global gcc_compiled |
c906108c | 3156 | |
a97b16b8 DE |
3157 | if [info exists compiler_info] { |
3158 | # Already computed. | |
3159 | return 0 | |
3160 | } | |
3161 | ||
94b8e876 MC |
3162 | # Choose which file to preprocess. |
3163 | set ifile "${srcdir}/lib/compiler.c" | |
4c93b1db | 3164 | if { $arg == "c++" } { |
94b8e876 | 3165 | set ifile "${srcdir}/lib/compiler.cc" |
c906108c | 3166 | } |
085dd6e6 | 3167 | |
94b8e876 MC |
3168 | # Run $ifile through the right preprocessor. |
3169 | # Toggle gdb.log to keep the compiler output out of the log. | |
95d7853e | 3170 | set saved_log [log_file -info] |
94b8e876 | 3171 | log_file |
e7f86de9 JM |
3172 | if [is_remote host] { |
3173 | # We have to use -E and -o together, despite the comments | |
3174 | # above, because of how DejaGnu handles remote host testing. | |
3175 | set ppout "$outdir/compiler.i" | |
4c93b1db | 3176 | gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet] |
e7f86de9 JM |
3177 | set file [open $ppout r] |
3178 | set cppout [read $file] | |
3179 | close $file | |
3180 | } else { | |
4c93b1db | 3181 | set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ] |
e7f86de9 | 3182 | } |
95d7853e | 3183 | eval log_file $saved_log |
94b8e876 | 3184 | |
4f70a4c9 MC |
3185 | # Eval the output. |
3186 | set unknown 0 | |
94b8e876 | 3187 | foreach cppline [ split "$cppout" "\n" ] { |
4f70a4c9 MC |
3188 | if { [ regexp "^#" "$cppline" ] } { |
3189 | # line marker | |
3190 | } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } { | |
3191 | # blank line | |
3192 | } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } { | |
3193 | # eval this line | |
3194 | verbose "get_compiler_info: $cppline" 2 | |
3195 | eval "$cppline" | |
3196 | } else { | |
3197 | # unknown line | |
3198 | verbose -log "get_compiler_info: $cppline" | |
3199 | set unknown 1 | |
94b8e876 | 3200 | } |
085dd6e6 | 3201 | } |
4f70a4c9 | 3202 | |
a97b16b8 DE |
3203 | # Set to unknown if for some reason compiler_info didn't get defined. |
3204 | if ![info exists compiler_info] { | |
3205 | verbose -log "get_compiler_info: compiler_info not provided" | |
3206 | set compiler_info "unknown" | |
3207 | } | |
3208 | # Also set to unknown compiler if any diagnostics happened. | |
4f70a4c9 | 3209 | if { $unknown } { |
a97b16b8 | 3210 | verbose -log "get_compiler_info: got unexpected diagnostics" |
4f70a4c9 | 3211 | set compiler_info "unknown" |
4f70a4c9 MC |
3212 | } |
3213 | ||
3214 | # Set the legacy symbols. | |
3215 | set gcc_compiled 0 | |
4f70a4c9 MC |
3216 | if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 } |
3217 | if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 } | |
3218 | if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 } | |
3219 | if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 } | |
3220 | if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 } | |
4f70a4c9 MC |
3221 | |
3222 | # Log what happened. | |
94b8e876 | 3223 | verbose -log "get_compiler_info: $compiler_info" |
085dd6e6 JM |
3224 | |
3225 | # Most compilers will evaluate comparisons and other boolean | |
3226 | # operations to 0 or 1. | |
3227 | uplevel \#0 { set true 1 } | |
3228 | uplevel \#0 { set false 0 } | |
3229 | ||
ae59b1da | 3230 | return 0 |
c906108c SS |
3231 | } |
3232 | ||
a97b16b8 DE |
3233 | # Return the compiler_info string if no arg is provided. |
3234 | # Otherwise the argument is a glob-style expression to match against | |
3235 | # compiler_info. | |
3236 | ||
9b593790 | 3237 | proc test_compiler_info { {compiler ""} } { |
853d6e5b | 3238 | global compiler_info |
a97b16b8 | 3239 | get_compiler_info |
6e87504d | 3240 | |
a97b16b8 DE |
3241 | # If no arg, return the compiler_info string. |
3242 | if [string match "" $compiler] { | |
3243 | return $compiler_info | |
3244 | } | |
6e87504d | 3245 | |
853d6e5b AC |
3246 | return [string match $compiler $compiler_info] |
3247 | } | |
3248 | ||
f6838f81 DJ |
3249 | proc current_target_name { } { |
3250 | global target_info | |
3251 | if [info exists target_info(target,name)] { | |
3252 | set answer $target_info(target,name) | |
3253 | } else { | |
3254 | set answer "" | |
3255 | } | |
3256 | return $answer | |
3257 | } | |
3258 | ||
f1c47eb2 | 3259 | set gdb_wrapper_initialized 0 |
f6838f81 | 3260 | set gdb_wrapper_target "" |
f1c47eb2 MS |
3261 | |
3262 | proc gdb_wrapper_init { args } { | |
4ec70201 PA |
3263 | global gdb_wrapper_initialized |
3264 | global gdb_wrapper_file | |
3265 | global gdb_wrapper_flags | |
f6838f81 | 3266 | global gdb_wrapper_target |
f1c47eb2 MS |
3267 | |
3268 | if { $gdb_wrapper_initialized == 1 } { return; } | |
3269 | ||
3270 | if {[target_info exists needs_status_wrapper] && \ | |
277254ba | 3271 | [target_info needs_status_wrapper] != "0"} { |
4ec70201 | 3272 | set result [build_wrapper "testglue.o"] |
f1c47eb2 | 3273 | if { $result != "" } { |
4ec70201 PA |
3274 | set gdb_wrapper_file [lindex $result 0] |
3275 | set gdb_wrapper_flags [lindex $result 1] | |
f1c47eb2 MS |
3276 | } else { |
3277 | warning "Status wrapper failed to build." | |
3278 | } | |
3279 | } | |
3280 | set gdb_wrapper_initialized 1 | |
f6838f81 | 3281 | set gdb_wrapper_target [current_target_name] |
f1c47eb2 MS |
3282 | } |
3283 | ||
f747e0ce PA |
3284 | # Some targets need to always link a special object in. Save its path here. |
3285 | global gdb_saved_set_unbuffered_mode_obj | |
3286 | set gdb_saved_set_unbuffered_mode_obj "" | |
3287 | ||
aff9c0f8 SM |
3288 | # Compile source files specified by SOURCE into a binary of type TYPE at path |
3289 | # DEST. gdb_compile is implemented using DejaGnu's target_compile, so the type | |
3290 | # parameter and most options are passed directly to it. | |
3291 | # | |
3292 | # The type can be one of the following: | |
3293 | # | |
3294 | # - object: Compile into an object file. | |
3295 | # - executable: Compile and link into an executable. | |
3296 | # - preprocess: Preprocess the source files. | |
3297 | # - assembly: Generate assembly listing. | |
3298 | # | |
3299 | # The following options are understood and processed by gdb_compile: | |
3300 | # | |
3301 | # - shlib=so_path: Add SO_PATH to the sources, and enable some target-specific | |
3302 | # quirks to be able to use shared libraries. | |
3303 | # - shlib_load: Link with appropriate libraries to allow the test to | |
3304 | # dynamically load libraries at runtime. For example, on Linux, this adds | |
3305 | # -ldl so that the test can use dlopen. | |
3306 | # - nowarnings: Inhibit all compiler warnings. | |
3307 | # | |
3308 | # And here are some of the not too obscure options understood by DejaGnu that | |
3309 | # influence the compilation: | |
3310 | # | |
3311 | # - additional_flags=flag: Add FLAG to the compiler flags. | |
3312 | # - libs=library: Add LIBRARY to the libraries passed to the linker. The | |
3313 | # argument can be a file, in which case it's added to the sources, or a | |
3314 | # linker flag. | |
3315 | # - ldflags=flag: Add FLAG to the linker flags. | |
3316 | # - incdir=path: Add PATH to the searched include directories. | |
3317 | # - libdir=path: Add PATH to the linker searched directories. | |
3318 | # - ada, c++, f77: Compile the file as Ada, C++ or Fortran. | |
3319 | # - debug: Build with debug information. | |
3320 | # - optimize: Build with optimization. | |
3321 | ||
c906108c | 3322 | proc gdb_compile {source dest type options} { |
4ec70201 PA |
3323 | global GDB_TESTCASE_OPTIONS |
3324 | global gdb_wrapper_file | |
3325 | global gdb_wrapper_flags | |
3326 | global gdb_wrapper_initialized | |
f747e0ce PA |
3327 | global srcdir |
3328 | global objdir | |
3329 | global gdb_saved_set_unbuffered_mode_obj | |
c906108c | 3330 | |
695e2681 MK |
3331 | set outdir [file dirname $dest] |
3332 | ||
3333 | # Add platform-specific options if a shared library was specified using | |
3334 | # "shlib=librarypath" in OPTIONS. | |
3335 | set new_options "" | |
3336 | set shlib_found 0 | |
bdf7534a | 3337 | set shlib_load 0 |
695e2681 | 3338 | foreach opt $options { |
57bf0e56 DJ |
3339 | if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] { |
3340 | if [test_compiler_info "xlc-*"] { | |
93f02886 DJ |
3341 | # IBM xlc compiler doesn't accept shared library named other |
3342 | # than .so: use "-Wl," to bypass this | |
3343 | lappend source "-Wl,$shlib_name" | |
3344 | } elseif { ([istarget "*-*-mingw*"] | |
3345 | || [istarget *-*-cygwin*] | |
3346 | || [istarget *-*-pe*])} { | |
3347 | lappend source "${shlib_name}.a" | |
57bf0e56 DJ |
3348 | } else { |
3349 | lappend source $shlib_name | |
3350 | } | |
0413d738 | 3351 | if { $shlib_found == 0 } { |
57bf0e56 | 3352 | set shlib_found 1 |
0413d738 PA |
3353 | if { ([istarget "*-*-mingw*"] |
3354 | || [istarget *-*-cygwin*]) } { | |
bb61102d | 3355 | lappend new_options "additional_flags=-Wl,--enable-auto-import" |
0413d738 | 3356 | } |
6ebea266 DE |
3357 | if { [test_compiler_info "gcc-*"] || [test_compiler_info "clang-*"] } { |
3358 | # Undo debian's change in the default. | |
3359 | # Put it at the front to not override any user-provided | |
3360 | # value, and to make sure it appears in front of all the | |
3361 | # shlibs! | |
3362 | lappend new_options "early_flags=-Wl,--no-as-needed" | |
3363 | } | |
57bf0e56 | 3364 | } |
b0f4b84b | 3365 | } elseif { $opt == "shlib_load" } { |
bdf7534a | 3366 | set shlib_load 1 |
57bf0e56 DJ |
3367 | } else { |
3368 | lappend new_options $opt | |
3369 | } | |
695e2681 | 3370 | } |
bdf7534a | 3371 | |
6e774b13 SM |
3372 | # Because we link with libraries using their basename, we may need |
3373 | # (depending on the platform) to set a special rpath value, to allow | |
3374 | # the executable to find the libraries it depends on. | |
3375 | if { $shlib_load || $shlib_found } { | |
bdf7534a NF |
3376 | if { ([istarget "*-*-mingw*"] |
3377 | || [istarget *-*-cygwin*] | |
3ca22649 | 3378 | || [istarget *-*-pe*]) } { |
bdf7534a | 3379 | # Do not need anything. |
b2a6bdeb | 3380 | } elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } { |
d8b34041 | 3381 | lappend new_options "ldflags=-Wl,-rpath,${outdir}" |
759f0f0b PA |
3382 | } elseif { [istarget arm*-*-symbianelf*] } { |
3383 | if { $shlib_load } { | |
3384 | lappend new_options "libs=-ldl" | |
3385 | } | |
bdf7534a NF |
3386 | } else { |
3387 | if { $shlib_load } { | |
3388 | lappend new_options "libs=-ldl" | |
3389 | } | |
d8b34041 | 3390 | lappend new_options "ldflags=-Wl,-rpath,\\\$ORIGIN" |
bdf7534a NF |
3391 | } |
3392 | } | |
695e2681 | 3393 | set options $new_options |
57bf0e56 | 3394 | |
c906108c | 3395 | if [info exists GDB_TESTCASE_OPTIONS] { |
4ec70201 | 3396 | lappend options "additional_flags=$GDB_TESTCASE_OPTIONS" |
c906108c SS |
3397 | } |
3398 | verbose "options are $options" | |
3399 | verbose "source is $source $dest $type $options" | |
3400 | ||
f1c47eb2 MS |
3401 | if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init } |
3402 | ||
3403 | if {[target_info exists needs_status_wrapper] && \ | |
3404 | [target_info needs_status_wrapper] != "0" && \ | |
3405 | [info exists gdb_wrapper_file]} { | |
3406 | lappend options "libs=${gdb_wrapper_file}" | |
3407 | lappend options "ldflags=${gdb_wrapper_flags}" | |
3408 | } | |
3409 | ||
fc91c6c2 PB |
3410 | # Replace the "nowarnings" option with the appropriate additional_flags |
3411 | # to disable compiler warnings. | |
3412 | set nowarnings [lsearch -exact $options nowarnings] | |
3413 | if {$nowarnings != -1} { | |
3414 | if [target_info exists gdb,nowarnings_flag] { | |
3415 | set flag "additional_flags=[target_info gdb,nowarnings_flag]" | |
3416 | } else { | |
3417 | set flag "additional_flags=-w" | |
3418 | } | |
3419 | set options [lreplace $options $nowarnings $nowarnings $flag] | |
3420 | } | |
3421 | ||
f747e0ce PA |
3422 | if { $type == "executable" } { |
3423 | if { ([istarget "*-*-mingw*"] | |
56643c5e | 3424 | || [istarget "*-*-*djgpp"] |
f747e0ce PA |
3425 | || [istarget "*-*-cygwin*"])} { |
3426 | # Force output to unbuffered mode, by linking in an object file | |
3427 | # with a global contructor that calls setvbuf. | |
3428 | # | |
3429 | # Compile the special object seperatelly for two reasons: | |
3430 | # 1) Insulate it from $options. | |
3431 | # 2) Avoid compiling it for every gdb_compile invocation, | |
3432 | # which is time consuming, especially if we're remote | |
3433 | # host testing. | |
3434 | # | |
3435 | if { $gdb_saved_set_unbuffered_mode_obj == "" } { | |
3436 | verbose "compiling gdb_saved_set_unbuffered_obj" | |
3437 | set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c | |
3438 | set unbuf_obj ${objdir}/set_unbuffered_mode.o | |
3439 | ||
3440 | set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}] | |
3441 | if { $result != "" } { | |
3442 | return $result | |
3443 | } | |
f6dc277e YQ |
3444 | if {[is_remote host]} { |
3445 | set gdb_saved_set_unbuffered_mode_obj set_unbuffered_mode_saved.o | |
3446 | } else { | |
3447 | set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o | |
3448 | } | |
f747e0ce PA |
3449 | # Link a copy of the output object, because the |
3450 | # original may be automatically deleted. | |
f6dc277e | 3451 | remote_download host $unbuf_obj $gdb_saved_set_unbuffered_mode_obj |
f747e0ce PA |
3452 | } else { |
3453 | verbose "gdb_saved_set_unbuffered_obj already compiled" | |
3454 | } | |
3455 | ||
3456 | # Rely on the internal knowledge that the global ctors are ran in | |
3457 | # reverse link order. In that case, we can use ldflags to | |
3458 | # avoid copying the object file to the host multiple | |
3459 | # times. | |
ace5c364 PM |
3460 | # This object can only be added if standard libraries are |
3461 | # used. Thus, we need to disable it if -nostdlib option is used | |
3462 | if {[lsearch -regexp $options "-nostdlib"] < 0 } { | |
3463 | lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj" | |
3464 | } | |
f747e0ce PA |
3465 | } |
3466 | } | |
3467 | ||
4ec70201 | 3468 | set result [target_compile $source $dest $type $options] |
93f02886 DJ |
3469 | |
3470 | # Prune uninteresting compiler (and linker) output. | |
3471 | regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result | |
3472 | ||
4ec70201 PA |
3473 | regsub "\[\r\n\]*$" "$result" "" result |
3474 | regsub "^\[\r\n\]*" "$result" "" result | |
ec3c07fc NS |
3475 | |
3476 | if {[lsearch $options quiet] < 0} { | |
3477 | # We shall update this on a per language basis, to avoid | |
3478 | # changing the entire testsuite in one go. | |
3479 | if {[lsearch $options f77] >= 0} { | |
3480 | gdb_compile_test $source $result | |
3481 | } elseif { $result != "" } { | |
3482 | clone_output "gdb compile failed, $result" | |
3483 | } | |
c906108c | 3484 | } |
ae59b1da | 3485 | return $result |
c906108c SS |
3486 | } |
3487 | ||
b6ff0e81 JB |
3488 | |
3489 | # This is just like gdb_compile, above, except that it tries compiling | |
3490 | # against several different thread libraries, to see which one this | |
3491 | # system has. | |
3492 | proc gdb_compile_pthreads {source dest type options} { | |
0ae67eb3 | 3493 | set built_binfile 0 |
b6ff0e81 | 3494 | set why_msg "unrecognized error" |
24486cb7 | 3495 | foreach lib {-lpthreads -lpthread -lthread ""} { |
b6ff0e81 JB |
3496 | # This kind of wipes out whatever libs the caller may have |
3497 | # set. Or maybe theirs will override ours. How infelicitous. | |
b5ab8ff3 | 3498 | set options_with_lib [concat $options [list libs=$lib quiet]] |
b6ff0e81 JB |
3499 | set ccout [gdb_compile $source $dest $type $options_with_lib] |
3500 | switch -regexp -- $ccout { | |
3501 | ".*no posix threads support.*" { | |
3502 | set why_msg "missing threads include file" | |
3503 | break | |
3504 | } | |
3505 | ".*cannot open -lpthread.*" { | |
3506 | set why_msg "missing runtime threads library" | |
3507 | } | |
3508 | ".*Can't find library for -lpthread.*" { | |
3509 | set why_msg "missing runtime threads library" | |
3510 | } | |
3511 | {^$} { | |
3512 | pass "successfully compiled posix threads test case" | |
3513 | set built_binfile 1 | |
3514 | break | |
3515 | } | |
3516 | } | |
3517 | } | |
0ae67eb3 | 3518 | if {!$built_binfile} { |
40d1a503 | 3519 | unsupported "Couldn't compile [file tail $source]: ${why_msg}" |
b6ff0e81 JB |
3520 | return -1 |
3521 | } | |
57bf0e56 DJ |
3522 | } |
3523 | ||
409d8f48 | 3524 | # Build a shared library from SOURCES. |
57bf0e56 DJ |
3525 | |
3526 | proc gdb_compile_shlib {sources dest options} { | |
3527 | set obj_options $options | |
3528 | ||
409d8f48 AB |
3529 | set info_options "" |
3530 | if { [lsearch -exact $options "c++"] >= 0 } { | |
3531 | set info_options "c++" | |
3532 | } | |
3533 | if [get_compiler_info ${info_options}] { | |
3534 | return -1 | |
3535 | } | |
3536 | ||
57bf0e56 DJ |
3537 | switch -glob [test_compiler_info] { |
3538 | "xlc-*" { | |
3539 | lappend obj_options "additional_flags=-qpic" | |
3540 | } | |
ee92b0dd DE |
3541 | "clang-*" { |
3542 | if { !([istarget "*-*-cygwin*"] | |
3543 | || [istarget "*-*-mingw*"]) } { | |
3544 | lappend obj_options "additional_flags=-fpic" | |
3545 | } | |
3546 | } | |
57bf0e56 DJ |
3547 | "gcc-*" { |
3548 | if { !([istarget "powerpc*-*-aix*"] | |
227c54da DJ |
3549 | || [istarget "rs6000*-*-aix*"] |
3550 | || [istarget "*-*-cygwin*"] | |
3551 | || [istarget "*-*-mingw*"] | |
3552 | || [istarget "*-*-pe*"]) } { | |
57bf0e56 DJ |
3553 | lappend obj_options "additional_flags=-fpic" |
3554 | } | |
3555 | } | |
9b9b09e9 BH |
3556 | "icc-*" { |
3557 | lappend obj_options "additional_flags=-fpic" | |
3558 | } | |
57bf0e56 | 3559 | default { |
3ca22649 | 3560 | # don't know what the compiler is... |
57bf0e56 DJ |
3561 | } |
3562 | } | |
3563 | ||
3564 | set outdir [file dirname $dest] | |
3565 | set objects "" | |
3566 | foreach source $sources { | |
3567 | set sourcebase [file tail $source] | |
3568 | if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} { | |
3569 | return -1 | |
3570 | } | |
3571 | lappend objects ${outdir}/${sourcebase}.o | |
3572 | } | |
3573 | ||
3ca22649 SM |
3574 | set link_options $options |
3575 | if [test_compiler_info "xlc-*"] { | |
3576 | lappend link_options "additional_flags=-qmkshrobj" | |
57bf0e56 | 3577 | } else { |
3ca22649 SM |
3578 | lappend link_options "additional_flags=-shared" |
3579 | ||
3580 | if { ([istarget "*-*-mingw*"] | |
3581 | || [istarget *-*-cygwin*] | |
3582 | || [istarget *-*-pe*]) } { | |
3583 | if { [is_remote host] } { | |
3584 | set name [file tail ${dest}] | |
3585 | } else { | |
3586 | set name ${dest} | |
3587 | } | |
3588 | lappend link_options "additional_flags=-Wl,--out-implib,${name}.a" | |
6e774b13 SM |
3589 | } else { |
3590 | # Set the soname of the library. This causes the linker on ELF | |
3591 | # systems to create the DT_NEEDED entry in the executable referring | |
3592 | # to the soname of the library, and not its absolute path. This | |
3593 | # (using the absolute path) would be problem when testing on a | |
3594 | # remote target. | |
3595 | # | |
3596 | # In conjunction with setting the soname, we add the special | |
3597 | # rpath=$ORIGIN value when building the executable, so that it's | |
3598 | # able to find the library in its own directory. | |
3ca22649 SM |
3599 | set destbase [file tail $dest] |
3600 | lappend link_options "additional_flags=-Wl,-soname,$destbase" | |
3601 | } | |
3602 | } | |
3603 | if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} { | |
3604 | return -1 | |
57bf0e56 | 3605 | } |
3ca22649 SM |
3606 | if { [is_remote host] |
3607 | && ([istarget "*-*-mingw*"] | |
3608 | || [istarget *-*-cygwin*] | |
3609 | || [istarget *-*-pe*]) } { | |
3610 | set dest_tail_name [file tail ${dest}] | |
3611 | remote_upload host $dest_tail_name.a ${dest}.a | |
3612 | remote_file host delete $dest_tail_name.a | |
3613 | } | |
3614 | ||
3615 | return "" | |
b6ff0e81 JB |
3616 | } |
3617 | ||
756d88a7 UW |
3618 | # This is just like gdb_compile_shlib, above, except that it tries compiling |
3619 | # against several different thread libraries, to see which one this | |
3620 | # system has. | |
3621 | proc gdb_compile_shlib_pthreads {sources dest options} { | |
3622 | set built_binfile 0 | |
3623 | set why_msg "unrecognized error" | |
3624 | foreach lib {-lpthreads -lpthread -lthread ""} { | |
3625 | # This kind of wipes out whatever libs the caller may have | |
3626 | # set. Or maybe theirs will override ours. How infelicitous. | |
3627 | set options_with_lib [concat $options [list libs=$lib quiet]] | |
3628 | set ccout [gdb_compile_shlib $sources $dest $options_with_lib] | |
3629 | switch -regexp -- $ccout { | |
3630 | ".*no posix threads support.*" { | |
3631 | set why_msg "missing threads include file" | |
3632 | break | |
3633 | } | |
3634 | ".*cannot open -lpthread.*" { | |
3635 | set why_msg "missing runtime threads library" | |
3636 | } | |
3637 | ".*Can't find library for -lpthread.*" { | |
3638 | set why_msg "missing runtime threads library" | |
3639 | } | |
3640 | {^$} { | |
3641 | pass "successfully compiled posix threads test case" | |
3642 | set built_binfile 1 | |
3643 | break | |
3644 | } | |
3645 | } | |
3646 | } | |
3647 | if {!$built_binfile} { | |
3648 | unsupported "Couldn't compile $sources: ${why_msg}" | |
3649 | return -1 | |
3650 | } | |
3651 | } | |
3652 | ||
130cacce AF |
3653 | # This is just like gdb_compile_pthreads, above, except that we always add the |
3654 | # objc library for compiling Objective-C programs | |
3655 | proc gdb_compile_objc {source dest type options} { | |
3656 | set built_binfile 0 | |
3657 | set why_msg "unrecognized error" | |
3658 | foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} { | |
3659 | # This kind of wipes out whatever libs the caller may have | |
3660 | # set. Or maybe theirs will override ours. How infelicitous. | |
3661 | if { $lib == "solaris" } { | |
3662 | set lib "-lpthread -lposix4" | |
3663 | } | |
3664 | if { $lib != "-lobjc" } { | |
3665 | set lib "-lobjc $lib" | |
3666 | } | |
3667 | set options_with_lib [concat $options [list libs=$lib quiet]] | |
3668 | set ccout [gdb_compile $source $dest $type $options_with_lib] | |
3669 | switch -regexp -- $ccout { | |
3670 | ".*no posix threads support.*" { | |
3671 | set why_msg "missing threads include file" | |
3672 | break | |
3673 | } | |
3674 | ".*cannot open -lpthread.*" { | |
3675 | set why_msg "missing runtime threads library" | |
3676 | } | |
3677 | ".*Can't find library for -lpthread.*" { | |
3678 | set why_msg "missing runtime threads library" | |
3679 | } | |
3680 | {^$} { | |
3681 | pass "successfully compiled objc with posix threads test case" | |
3682 | set built_binfile 1 | |
3683 | break | |
3684 | } | |
3685 | } | |
3686 | } | |
3687 | if {!$built_binfile} { | |
40d1a503 | 3688 | unsupported "Couldn't compile [file tail $source]: ${why_msg}" |
130cacce AF |
3689 | return -1 |
3690 | } | |
3691 | } | |
3692 | ||
c906108c | 3693 | proc send_gdb { string } { |
4ec70201 | 3694 | global suppress_flag |
c906108c | 3695 | if { $suppress_flag } { |
ae59b1da | 3696 | return "suppressed" |
c906108c | 3697 | } |
ae59b1da | 3698 | return [remote_send host "$string"] |
c906108c SS |
3699 | } |
3700 | ||
f71c18e7 PA |
3701 | # Send STRING to the inferior's terminal. |
3702 | ||
3703 | proc send_inferior { string } { | |
3704 | global inferior_spawn_id | |
3705 | ||
3706 | if {[catch "send -i $inferior_spawn_id -- \$string" errorInfo]} { | |
3707 | return "$errorInfo" | |
3708 | } else { | |
3709 | return "" | |
3710 | } | |
3711 | } | |
3712 | ||
c906108c SS |
3713 | # |
3714 | # | |
3715 | ||
3716 | proc gdb_expect { args } { | |
3717 | if { [llength $args] == 2 && [lindex $args 0] != "-re" } { | |
4ec70201 PA |
3718 | set atimeout [lindex $args 0] |
3719 | set expcode [list [lindex $args 1]] | |
c906108c | 3720 | } else { |
4ec70201 | 3721 | set expcode $args |
2f34202f MR |
3722 | } |
3723 | ||
4a40f85a MR |
3724 | # A timeout argument takes precedence, otherwise of all the timeouts |
3725 | # select the largest. | |
4a40f85a MR |
3726 | if [info exists atimeout] { |
3727 | set tmt $atimeout | |
3728 | } else { | |
45fd756c | 3729 | set tmt [get_largest_timeout] |
c906108c | 3730 | } |
2f34202f | 3731 | |
4ec70201 PA |
3732 | global suppress_flag |
3733 | global remote_suppress_flag | |
c906108c | 3734 | if [info exists remote_suppress_flag] { |
4ec70201 | 3735 | set old_val $remote_suppress_flag |
c906108c SS |
3736 | } |
3737 | if [info exists suppress_flag] { | |
3738 | if { $suppress_flag } { | |
4ec70201 | 3739 | set remote_suppress_flag 1 |
c906108c SS |
3740 | } |
3741 | } | |
a0b3c4fd | 3742 | set code [catch \ |
4a40f85a | 3743 | {uplevel remote_expect host $tmt $expcode} string] |
c906108c | 3744 | if [info exists old_val] { |
4ec70201 | 3745 | set remote_suppress_flag $old_val |
c906108c SS |
3746 | } else { |
3747 | if [info exists remote_suppress_flag] { | |
4ec70201 | 3748 | unset remote_suppress_flag |
c906108c SS |
3749 | } |
3750 | } | |
3751 | ||
3752 | if {$code == 1} { | |
4ec70201 | 3753 | global errorInfo errorCode |
c906108c SS |
3754 | |
3755 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string | |
d6d7a51a | 3756 | } else { |
c906108c SS |
3757 | return -code $code $string |
3758 | } | |
3759 | } | |
3760 | ||
5fa290c1 | 3761 | # gdb_expect_list TEST SENTINEL LIST -- expect a sequence of outputs |
085dd6e6 JM |
3762 | # |
3763 | # Check for long sequence of output by parts. | |
5fa290c1 | 3764 | # TEST: is the test message to be printed with the test success/fail. |
085dd6e6 JM |
3765 | # SENTINEL: Is the terminal pattern indicating that output has finished. |
3766 | # LIST: is the sequence of outputs to match. | |
3767 | # If the sentinel is recognized early, it is considered an error. | |
3768 | # | |
11cf8741 JM |
3769 | # Returns: |
3770 | # 1 if the test failed, | |
3771 | # 0 if the test passes, | |
3772 | # -1 if there was an internal error. | |
5fa290c1 | 3773 | |
c2d11a7d | 3774 | proc gdb_expect_list {test sentinel list} { |
085dd6e6 | 3775 | global gdb_prompt |
11cf8741 | 3776 | global suppress_flag |
085dd6e6 | 3777 | set index 0 |
43ff13b4 | 3778 | set ok 1 |
11cf8741 JM |
3779 | if { $suppress_flag } { |
3780 | set ok 0 | |
a20ce2c3 | 3781 | unresolved "${test}" |
11cf8741 | 3782 | } |
43ff13b4 | 3783 | while { ${index} < [llength ${list}] } { |
085dd6e6 JM |
3784 | set pattern [lindex ${list} ${index}] |
3785 | set index [expr ${index} + 1] | |
6b0ecdc2 | 3786 | verbose -log "gdb_expect_list pattern: /$pattern/" 2 |
085dd6e6 | 3787 | if { ${index} == [llength ${list}] } { |
43ff13b4 JM |
3788 | if { ${ok} } { |
3789 | gdb_expect { | |
c2d11a7d | 3790 | -re "${pattern}${sentinel}" { |
a20ce2c3 | 3791 | # pass "${test}, pattern ${index} + sentinel" |
c2d11a7d JM |
3792 | } |
3793 | -re "${sentinel}" { | |
a20ce2c3 | 3794 | fail "${test} (pattern ${index} + sentinel)" |
c2d11a7d | 3795 | set ok 0 |
43ff13b4 | 3796 | } |
5c5455dc AC |
3797 | -re ".*A problem internal to GDB has been detected" { |
3798 | fail "${test} (GDB internal error)" | |
3799 | set ok 0 | |
3800 | gdb_internal_error_resync | |
3801 | } | |
43ff13b4 | 3802 | timeout { |
a20ce2c3 | 3803 | fail "${test} (pattern ${index} + sentinel) (timeout)" |
43ff13b4 JM |
3804 | set ok 0 |
3805 | } | |
085dd6e6 | 3806 | } |
43ff13b4 | 3807 | } else { |
a20ce2c3 | 3808 | # unresolved "${test}, pattern ${index} + sentinel" |
085dd6e6 JM |
3809 | } |
3810 | } else { | |
43ff13b4 JM |
3811 | if { ${ok} } { |
3812 | gdb_expect { | |
3813 | -re "${pattern}" { | |
a20ce2c3 | 3814 | # pass "${test}, pattern ${index}" |
43ff13b4 | 3815 | } |
c2d11a7d | 3816 | -re "${sentinel}" { |
a20ce2c3 | 3817 | fail "${test} (pattern ${index})" |
43ff13b4 JM |
3818 | set ok 0 |
3819 | } | |
5c5455dc AC |
3820 | -re ".*A problem internal to GDB has been detected" { |
3821 | fail "${test} (GDB internal error)" | |
3822 | set ok 0 | |
3823 | gdb_internal_error_resync | |
3824 | } | |
43ff13b4 | 3825 | timeout { |
a20ce2c3 | 3826 | fail "${test} (pattern ${index}) (timeout)" |
43ff13b4 JM |
3827 | set ok 0 |
3828 | } | |
085dd6e6 | 3829 | } |
43ff13b4 | 3830 | } else { |
a20ce2c3 | 3831 | # unresolved "${test}, pattern ${index}" |
085dd6e6 JM |
3832 | } |
3833 | } | |
3834 | } | |
11cf8741 | 3835 | if { ${ok} } { |
a20ce2c3 | 3836 | pass "${test}" |
11cf8741 JM |
3837 | return 0 |
3838 | } else { | |
3839 | return 1 | |
3840 | } | |
085dd6e6 JM |
3841 | } |
3842 | ||
3843 | # | |
3844 | # | |
c906108c | 3845 | proc gdb_suppress_entire_file { reason } { |
4ec70201 | 3846 | global suppress_flag |
c906108c | 3847 | |
4ec70201 PA |
3848 | warning "$reason\n" |
3849 | set suppress_flag -1 | |
c906108c SS |
3850 | } |
3851 | ||
3852 | # | |
3853 | # Set suppress_flag, which will cause all subsequent calls to send_gdb and | |
3854 | # gdb_expect to fail immediately (until the next call to | |
3855 | # gdb_stop_suppressing_tests). | |
3856 | # | |
3857 | proc gdb_suppress_tests { args } { | |
4ec70201 | 3858 | global suppress_flag |
c906108c SS |
3859 | |
3860 | return; # fnf - disable pending review of results where | |
3861 | # testsuite ran better without this | |
4ec70201 | 3862 | incr suppress_flag |
c906108c SS |
3863 | |
3864 | if { $suppress_flag == 1 } { | |
3865 | if { [llength $args] > 0 } { | |
4ec70201 | 3866 | warning "[lindex $args 0]\n" |
c906108c | 3867 | } else { |
4ec70201 | 3868 | warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n" |
c906108c SS |
3869 | } |
3870 | } | |
3871 | } | |
3872 | ||
3873 | # | |
3874 | # Clear suppress_flag. | |
3875 | # | |
3876 | proc gdb_stop_suppressing_tests { } { | |
4ec70201 | 3877 | global suppress_flag |
c906108c SS |
3878 | |
3879 | if [info exists suppress_flag] { | |
3880 | if { $suppress_flag > 0 } { | |
4ec70201 PA |
3881 | set suppress_flag 0 |
3882 | clone_output "Tests restarted.\n" | |
c906108c SS |
3883 | } |
3884 | } else { | |
4ec70201 | 3885 | set suppress_flag 0 |
c906108c SS |
3886 | } |
3887 | } | |
3888 | ||
3889 | proc gdb_clear_suppressed { } { | |
4ec70201 | 3890 | global suppress_flag |
c906108c | 3891 | |
4ec70201 | 3892 | set suppress_flag 0 |
c906108c SS |
3893 | } |
3894 | ||
94696ad3 PA |
3895 | # Spawn the gdb process. |
3896 | # | |
3897 | # This doesn't expect any output or do any other initialization, | |
3898 | # leaving those to the caller. | |
3899 | # | |
3900 | # Overridable function -- you can override this function in your | |
3901 | # baseboard file. | |
3902 | ||
3903 | proc gdb_spawn { } { | |
3904 | default_gdb_spawn | |
3905 | } | |
3906 | ||
98880d46 PA |
3907 | # Spawn GDB with CMDLINE_FLAGS appended to the GDBFLAGS global. |
3908 | ||
3909 | proc gdb_spawn_with_cmdline_opts { cmdline_flags } { | |
3910 | global GDBFLAGS | |
3911 | ||
3912 | set saved_gdbflags $GDBFLAGS | |
3913 | ||
0bbeccb1 PA |
3914 | if {$GDBFLAGS != ""} { |
3915 | append GDBFLAGS " " | |
3916 | } | |
98880d46 PA |
3917 | append GDBFLAGS $cmdline_flags |
3918 | ||
3919 | set res [gdb_spawn] | |
3920 | ||
3921 | set GDBFLAGS $saved_gdbflags | |
3922 | ||
3923 | return $res | |
3924 | } | |
3925 | ||
94696ad3 PA |
3926 | # Start gdb running, wait for prompt, and disable the pagers. |
3927 | ||
3928 | # Overridable function -- you can override this function in your | |
3929 | # baseboard file. | |
3930 | ||
c906108c SS |
3931 | proc gdb_start { } { |
3932 | default_gdb_start | |
3933 | } | |
3934 | ||
3935 | proc gdb_exit { } { | |
3936 | catch default_gdb_exit | |
3937 | } | |
3938 | ||
60b3033e PA |
3939 | # Return true if we can spawn a program on the target and attach to |
3940 | # it. | |
3941 | ||
3942 | proc can_spawn_for_attach { } { | |
2c8c5d37 PA |
3943 | # We use exp_pid to get the inferior's pid, assuming that gives |
3944 | # back the pid of the program. On remote boards, that would give | |
3945 | # us instead the PID of e.g., the ssh client, etc. | |
60b3033e PA |
3946 | if [is_remote target] then { |
3947 | return 0 | |
3948 | } | |
3949 | ||
3950 | # The "attach" command doesn't make sense when the target is | |
3951 | # stub-like, where GDB finds the program already started on | |
3952 | # initial connection. | |
3953 | if {[target_info exists use_gdb_stub]} { | |
3954 | return 0 | |
3955 | } | |
3956 | ||
3957 | # Assume yes. | |
3958 | return 1 | |
3959 | } | |
3960 | ||
2c8c5d37 PA |
3961 | # Kill a progress previously started with spawn_wait_for_attach, and |
3962 | # reap its wait status. PROC_SPAWN_ID is the spawn id associated with | |
3963 | # the process. | |
3964 | ||
3965 | proc kill_wait_spawned_process { proc_spawn_id } { | |
3966 | set pid [exp_pid -i $proc_spawn_id] | |
3967 | ||
3968 | verbose -log "killing ${pid}" | |
3969 | remote_exec build "kill -9 ${pid}" | |
3970 | ||
3971 | verbose -log "closing ${proc_spawn_id}" | |
3972 | catch "close -i $proc_spawn_id" | |
3973 | verbose -log "waiting for ${proc_spawn_id}" | |
3974 | ||
3975 | # If somehow GDB ends up still attached to the process here, a | |
3976 | # blocking wait hangs until gdb is killed (or until gdb / the | |
3977 | # ptracer reaps the exit status too, but that won't happen because | |
3978 | # something went wrong.) Passing -nowait makes expect tell Tcl to | |
3979 | # wait for the PID in the background. That's fine because we | |
3980 | # don't care about the exit status. */ | |
3981 | wait -nowait -i $proc_spawn_id | |
3982 | } | |
3983 | ||
3984 | # Returns the process id corresponding to the given spawn id. | |
3985 | ||
3986 | proc spawn_id_get_pid { spawn_id } { | |
3987 | set testpid [exp_pid -i $spawn_id] | |
3988 | ||
3989 | if { [istarget "*-*-cygwin*"] } { | |
3990 | # testpid is the Cygwin PID, GDB uses the Windows PID, which | |
3991 | # might be different due to the way fork/exec works. | |
3992 | set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ] | |
3993 | } | |
3994 | ||
3995 | return $testpid | |
3996 | } | |
3997 | ||
4c92ff2c | 3998 | # Start a set of programs running and then wait for a bit, to be sure |
2c8c5d37 PA |
3999 | # that they can be attached to. Return a list of processes spawn IDs, |
4000 | # one element for each process spawned. It's a test error to call | |
4001 | # this when [can_spawn_for_attach] is false. | |
4c92ff2c PA |
4002 | |
4003 | proc spawn_wait_for_attach { executable_list } { | |
2c8c5d37 | 4004 | set spawn_id_list {} |
4c92ff2c | 4005 | |
60b3033e PA |
4006 | if ![can_spawn_for_attach] { |
4007 | # The caller should have checked can_spawn_for_attach itself | |
4008 | # before getting here. | |
4009 | error "can't spawn for attach with this target/board" | |
4010 | } | |
4011 | ||
4c92ff2c | 4012 | foreach {executable} $executable_list { |
2c8c5d37 PA |
4013 | # Note we use Expect's spawn, not Tcl's exec, because with |
4014 | # spawn we control when to wait for/reap the process. That | |
4015 | # allows killing the process by PID without being subject to | |
4016 | # pid-reuse races. | |
4017 | lappend spawn_id_list [remote_spawn target $executable] | |
4c92ff2c PA |
4018 | } |
4019 | ||
4020 | sleep 2 | |
4021 | ||
2c8c5d37 | 4022 | return $spawn_id_list |
4c92ff2c PA |
4023 | } |
4024 | ||
e63b55d1 NS |
4025 | # |
4026 | # gdb_load_cmd -- load a file into the debugger. | |
4027 | # ARGS - additional args to load command. | |
4028 | # return a -1 if anything goes wrong. | |
4029 | # | |
4030 | proc gdb_load_cmd { args } { | |
4031 | global gdb_prompt | |
4032 | ||
4033 | if [target_info exists gdb_load_timeout] { | |
4034 | set loadtimeout [target_info gdb_load_timeout] | |
4035 | } else { | |
4036 | set loadtimeout 1600 | |
4037 | } | |
4038 | send_gdb "load $args\n" | |
e91528f0 | 4039 | verbose "Timeout is now $loadtimeout seconds" 2 |
e63b55d1 NS |
4040 | gdb_expect $loadtimeout { |
4041 | -re "Loading section\[^\r\]*\r\n" { | |
4042 | exp_continue | |
4043 | } | |
4044 | -re "Start address\[\r\]*\r\n" { | |
4045 | exp_continue | |
4046 | } | |
4047 | -re "Transfer rate\[\r\]*\r\n" { | |
4048 | exp_continue | |
4049 | } | |
4050 | -re "Memory access error\[^\r\]*\r\n" { | |
4051 | perror "Failed to load program" | |
4052 | return -1 | |
4053 | } | |
4054 | -re "$gdb_prompt $" { | |
4055 | return 0 | |
4056 | } | |
4057 | -re "(.*)\r\n$gdb_prompt " { | |
4058 | perror "Unexpected reponse from 'load' -- $expect_out(1,string)" | |
4059 | return -1 | |
4060 | } | |
4061 | timeout { | |
c4b347c7 | 4062 | perror "Timed out trying to load $args." |
e63b55d1 NS |
4063 | return -1 |
4064 | } | |
4065 | } | |
4066 | return -1 | |
4067 | } | |
4068 | ||
2d338fa9 TT |
4069 | # Invoke "gcore". CORE is the name of the core file to write. TEST |
4070 | # is the name of the test case. This will return 1 if the core file | |
4071 | # was created, 0 otherwise. If this fails to make a core file because | |
4072 | # this configuration of gdb does not support making core files, it | |
4073 | # will call "unsupported", not "fail". However, if this fails to make | |
4074 | # a core file for some other reason, then it will call "fail". | |
4075 | ||
4076 | proc gdb_gcore_cmd {core test} { | |
4077 | global gdb_prompt | |
4078 | ||
4079 | set result 0 | |
4080 | gdb_test_multiple "gcore $core" $test { | |
4081 | -re "Saved corefile .*\[\r\n\]+$gdb_prompt $" { | |
4082 | pass $test | |
4083 | set result 1 | |
4084 | } | |
bbe769cc | 4085 | -re "(?:Can't create a corefile|Target does not support core file generation\\.)\[\r\n\]+$gdb_prompt $" { |
2d338fa9 TT |
4086 | unsupported $test |
4087 | } | |
4088 | } | |
4089 | ||
4090 | return $result | |
4091 | } | |
4092 | ||
fac51dd9 DE |
4093 | # Load core file CORE. TEST is the name of the test case. |
4094 | # This will record a pass/fail for loading the core file. | |
4095 | # Returns: | |
4096 | # 1 - core file is successfully loaded | |
4097 | # 0 - core file loaded but has a non fatal error | |
4098 | # -1 - core file failed to load | |
4099 | ||
4100 | proc gdb_core_cmd { core test } { | |
4101 | global gdb_prompt | |
4102 | ||
4f424bb1 | 4103 | gdb_test_multiple "core $core" "$test" { |
fac51dd9 DE |
4104 | -re "\\\[Thread debugging using \[^ \r\n\]* enabled\\\]\r\n" { |
4105 | exp_continue | |
4106 | } | |
4107 | -re " is not a core dump:.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4108 | fail "$test (bad file format)" |
fac51dd9 DE |
4109 | return -1 |
4110 | } | |
4111 | -re ": No such file or directory.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4112 | fail "$test (file not found)" |
fac51dd9 DE |
4113 | return -1 |
4114 | } | |
4115 | -re "Couldn't find .* registers in core file.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4116 | fail "$test (incomplete note section)" |
fac51dd9 DE |
4117 | return 0 |
4118 | } | |
4119 | -re "Core was generated by .*\r\n$gdb_prompt $" { | |
4f424bb1 | 4120 | pass "$test" |
fac51dd9 DE |
4121 | return 1 |
4122 | } | |
4123 | -re ".*$gdb_prompt $" { | |
4f424bb1 | 4124 | fail "$test" |
fac51dd9 DE |
4125 | return -1 |
4126 | } | |
4127 | timeout { | |
4f424bb1 | 4128 | fail "$test (timeout)" |
fac51dd9 DE |
4129 | return -1 |
4130 | } | |
4131 | } | |
4132 | fail "unsupported output from 'core' command" | |
4133 | return -1 | |
4134 | } | |
4135 | ||
759f0f0b PA |
4136 | # Return the filename to download to the target and load on the target |
4137 | # for this shared library. Normally just LIBNAME, unless shared libraries | |
4138 | # for this target have separate link and load images. | |
4139 | ||
4140 | proc shlib_target_file { libname } { | |
4141 | return $libname | |
4142 | } | |
4143 | ||
4144 | # Return the filename GDB will load symbols from when debugging this | |
4145 | # shared library. Normally just LIBNAME, unless shared libraries for | |
4146 | # this target have separate link and load images. | |
4147 | ||
4148 | proc shlib_symbol_file { libname } { | |
4149 | return $libname | |
4150 | } | |
4151 | ||
56744f0a JJ |
4152 | # Return the filename to download to the target and load for this |
4153 | # executable. Normally just BINFILE unless it is renamed to something | |
4154 | # else for this target. | |
4155 | ||
4156 | proc exec_target_file { binfile } { | |
4157 | return $binfile | |
4158 | } | |
4159 | ||
4160 | # Return the filename GDB will load symbols from when debugging this | |
4161 | # executable. Normally just BINFILE unless executables for this target | |
4162 | # have separate files for symbols. | |
4163 | ||
4164 | proc exec_symbol_file { binfile } { | |
4165 | return $binfile | |
4166 | } | |
4167 | ||
4168 | # Rename the executable file. Normally this is just BINFILE1 being renamed | |
4169 | # to BINFILE2, but some targets require multiple binary files. | |
4170 | proc gdb_rename_execfile { binfile1 binfile2 } { | |
faf067f1 JK |
4171 | file rename -force [exec_target_file ${binfile1}] \ |
4172 | [exec_target_file ${binfile2}] | |
56744f0a | 4173 | if { [exec_target_file ${binfile1}] != [exec_symbol_file ${binfile1}] } { |
faf067f1 JK |
4174 | file rename -force [exec_symbol_file ${binfile1}] \ |
4175 | [exec_symbol_file ${binfile2}] | |
56744f0a JJ |
4176 | } |
4177 | } | |
4178 | ||
4179 | # "Touch" the executable file to update the date. Normally this is just | |
4180 | # BINFILE, but some targets require multiple files. | |
4181 | proc gdb_touch_execfile { binfile } { | |
faf067f1 JK |
4182 | set time [clock seconds] |
4183 | file mtime [exec_target_file ${binfile}] $time | |
56744f0a | 4184 | if { [exec_target_file ${binfile}] != [exec_symbol_file ${binfile}] } { |
faf067f1 | 4185 | file mtime [exec_symbol_file ${binfile}] $time |
56744f0a JJ |
4186 | } |
4187 | } | |
4188 | ||
7817ea46 SM |
4189 | # Like remote_download but provides a gdb-specific behavior. |
4190 | # | |
4191 | # If the destination board is remote, the local file FROMFILE is transferred as | |
4192 | # usual with remote_download to TOFILE on the remote board. The destination | |
4193 | # filename is added to the CLEANFILES global, so it can be cleaned up at the | |
4194 | # end of the test. | |
4195 | # | |
4196 | # If the destination board is local, the destination path TOFILE is passed | |
4197 | # through standard_output_file, and FROMFILE is copied there. | |
4198 | # | |
4199 | # In both cases, if TOFILE is omitted, it defaults to the [file tail] of | |
4200 | # FROMFILE. | |
44ee8174 TT |
4201 | |
4202 | proc gdb_remote_download {dest fromfile {tofile {}}} { | |
7817ea46 SM |
4203 | # If TOFILE is not given, default to the same filename as FROMFILE. |
4204 | if {[string length $tofile] == 0} { | |
4205 | set tofile [file tail $fromfile] | |
44ee8174 | 4206 | } |
ce4ea2bb | 4207 | |
7817ea46 SM |
4208 | if {[is_remote $dest]} { |
4209 | # When the DEST is remote, we simply send the file to DEST. | |
4210 | global cleanfiles | |
44ee8174 | 4211 | |
7817ea46 SM |
4212 | set destname [remote_download $dest $fromfile $tofile] |
4213 | lappend cleanfiles $destname | |
93f02886 | 4214 | |
7817ea46 SM |
4215 | return $destname |
4216 | } else { | |
8392fa22 SM |
4217 | # When the DEST is local, we copy the file to the test directory (where |
4218 | # the executable is). | |
4219 | # | |
4220 | # Note that we pass TOFILE through standard_output_file, regardless of | |
4221 | # whether it is absolute or relative, because we don't want the tests | |
4222 | # to be able to write outside their standard output directory. | |
4223 | ||
7817ea46 | 4224 | set tofile [standard_output_file $tofile] |
93f02886 | 4225 | |
7817ea46 SM |
4226 | file copy -force $fromfile $tofile |
4227 | ||
4228 | return $tofile | |
4229 | } | |
93f02886 DJ |
4230 | } |
4231 | ||
4232 | # gdb_load_shlibs LIB... | |
4233 | # | |
4234 | # Copy the listed libraries to the target. | |
4235 | ||
4236 | proc gdb_load_shlibs { args } { | |
93f02886 | 4237 | foreach file $args { |
7817ea46 | 4238 | gdb_remote_download target [shlib_target_file $file] |
93f02886 DJ |
4239 | } |
4240 | ||
6e774b13 SM |
4241 | if {[is_remote target]} { |
4242 | # If the target is remote, we need to tell gdb where to find the | |
4243 | # libraries. | |
4244 | # | |
4245 | # We could set this even when not testing remotely, but a user | |
4246 | # generally won't set it unless necessary. In order to make the tests | |
4247 | # more like the real-life scenarios, we don't set it for local testing. | |
4248 | gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "" "" | |
4249 | } | |
93f02886 DJ |
4250 | } |
4251 | ||
c906108c | 4252 | # |
5b80f00d PA |
4253 | # gdb_load -- load a file into the debugger. Specifying no file |
4254 | # defaults to the executable currently being debugged. | |
7e60a48e | 4255 | # The return value is 0 for success, -1 for failure. |
2db8e78e | 4256 | # Many files in config/*.exp override this procedure. |
c906108c SS |
4257 | # |
4258 | proc gdb_load { arg } { | |
5b80f00d PA |
4259 | if { $arg != "" } { |
4260 | return [gdb_file_cmd $arg] | |
4261 | } | |
7e60a48e | 4262 | return 0 |
c906108c SS |
4263 | } |
4264 | ||
b741e217 DJ |
4265 | # gdb_reload -- load a file into the target. Called before "running", |
4266 | # either the first time or after already starting the program once, | |
4267 | # for remote targets. Most files that override gdb_load should now | |
4268 | # override this instead. | |
4269 | ||
4270 | proc gdb_reload { } { | |
4271 | # For the benefit of existing configurations, default to gdb_load. | |
4272 | # Specifying no file defaults to the executable currently being | |
4273 | # debugged. | |
4274 | return [gdb_load ""] | |
4275 | } | |
4276 | ||
c906108c SS |
4277 | proc gdb_continue { function } { |
4278 | global decimal | |
4279 | ||
ae59b1da | 4280 | return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"] |
c906108c SS |
4281 | } |
4282 | ||
73c9764f | 4283 | proc default_gdb_init { test_file_name } { |
277254ba | 4284 | global gdb_wrapper_initialized |
f6838f81 | 4285 | global gdb_wrapper_target |
0a6d0306 | 4286 | global gdb_test_file_name |
93f02886 | 4287 | global cleanfiles |
73c9764f | 4288 | global pf_prefix |
277254ba | 4289 | |
93f02886 DJ |
4290 | set cleanfiles {} |
4291 | ||
4ec70201 | 4292 | gdb_clear_suppressed |
c906108c | 4293 | |
73c9764f | 4294 | set gdb_test_file_name [file rootname [file tail $test_file_name]] |
0a6d0306 | 4295 | |
277254ba MS |
4296 | # Make sure that the wrapper is rebuilt |
4297 | # with the appropriate multilib option. | |
f6838f81 DJ |
4298 | if { $gdb_wrapper_target != [current_target_name] } { |
4299 | set gdb_wrapper_initialized 0 | |
4300 | } | |
277254ba | 4301 | |
7b433602 JB |
4302 | # Unlike most tests, we have a small number of tests that generate |
4303 | # a very large amount of output. We therefore increase the expect | |
ff604a67 MR |
4304 | # buffer size to be able to contain the entire test output. This |
4305 | # is especially needed by gdb.base/info-macros.exp. | |
4306 | match_max -d 65536 | |
8d417781 PM |
4307 | # Also set this value for the currently running GDB. |
4308 | match_max [match_max -d] | |
c906108c SS |
4309 | |
4310 | # We want to add the name of the TCL testcase to the PASS/FAIL messages. | |
73c9764f | 4311 | set pf_prefix "[file tail [file dirname $test_file_name]]/[file tail $test_file_name]:" |
c906108c | 4312 | |
4ec70201 | 4313 | global gdb_prompt |
c906108c | 4314 | if [target_info exists gdb_prompt] { |
4ec70201 | 4315 | set gdb_prompt [target_info gdb_prompt] |
c906108c SS |
4316 | } else { |
4317 | set gdb_prompt "\\(gdb\\)" | |
4318 | } | |
e11ac3a3 JK |
4319 | global use_gdb_stub |
4320 | if [info exists use_gdb_stub] { | |
4321 | unset use_gdb_stub | |
4322 | } | |
c906108c SS |
4323 | } |
4324 | ||
3d338901 DE |
4325 | # Return a path using GDB_PARALLEL. |
4326 | # ARGS is a list of path elements to append to "$objdir/$GDB_PARALLEL". | |
4327 | # GDB_PARALLEL must be defined, the caller must check. | |
4328 | # | |
4329 | # The default value for GDB_PARALLEL is, canonically, ".". | |
4330 | # The catch is that tests don't expect an additional "./" in file paths so | |
4331 | # omit any directory for the default case. | |
4332 | # GDB_PARALLEL is written as "yes" for the default case in Makefile.in to mark | |
4333 | # its special handling. | |
4334 | ||
4335 | proc make_gdb_parallel_path { args } { | |
4336 | global GDB_PARALLEL objdir | |
4337 | set joiner [list "file" "join" $objdir] | |
2151ccc5 | 4338 | if { [info exists GDB_PARALLEL] && $GDB_PARALLEL != "yes" } { |
3d338901 DE |
4339 | lappend joiner $GDB_PARALLEL |
4340 | } | |
4341 | set joiner [concat $joiner $args] | |
4342 | return [eval $joiner] | |
4343 | } | |
4344 | ||
0a6d0306 | 4345 | # Turn BASENAME into a full file name in the standard output |
8a3e1f8d TT |
4346 | # directory. It is ok if BASENAME is the empty string; in this case |
4347 | # the directory is returned. | |
0a6d0306 TT |
4348 | |
4349 | proc standard_output_file {basename} { | |
2151ccc5 | 4350 | global objdir subdir gdb_test_file_name |
0a6d0306 | 4351 | |
2151ccc5 SM |
4352 | set dir [make_gdb_parallel_path outputs $subdir $gdb_test_file_name] |
4353 | file mkdir $dir | |
4354 | return [file join $dir $basename] | |
0a6d0306 TT |
4355 | } |
4356 | ||
4e234898 TT |
4357 | # Return the name of a file in our standard temporary directory. |
4358 | ||
4359 | proc standard_temp_file {basename} { | |
c4ef31bf SM |
4360 | # Since a particular runtest invocation is only executing a single test |
4361 | # file at any given time, we can use the runtest pid to build the | |
4362 | # path of the temp directory. | |
4363 | set dir [make_gdb_parallel_path temp [pid]] | |
4364 | file mkdir $dir | |
4365 | return [file join $dir $basename] | |
4e234898 TT |
4366 | } |
4367 | ||
0a6d0306 TT |
4368 | # Set 'testfile', 'srcfile', and 'binfile'. |
4369 | # | |
4370 | # ARGS is a list of source file specifications. | |
4371 | # Without any arguments, the .exp file's base name is used to | |
4372 | # compute the source file name. The ".c" extension is added in this case. | |
4373 | # If ARGS is not empty, each entry is a source file specification. | |
4374 | # If the specification starts with a ".", it is treated as a suffix | |
4375 | # to append to the .exp file's base name. | |
4376 | # If the specification is the empty string, it is treated as if it | |
4377 | # were ".c". | |
4378 | # Otherwise it is a file name. | |
4379 | # The first file in the list is used to set the 'srcfile' global. | |
4380 | # Each subsequent name is used to set 'srcfile2', 'srcfile3', etc. | |
4381 | # | |
4382 | # Most tests should call this without arguments. | |
4383 | # | |
4384 | # If a completely different binary file name is needed, then it | |
4385 | # should be handled in the .exp file with a suitable comment. | |
4386 | ||
4387 | proc standard_testfile {args} { | |
4388 | global gdb_test_file_name | |
93c0ef37 | 4389 | global subdir |
686f09d0 | 4390 | global gdb_test_file_last_vars |
0a6d0306 TT |
4391 | |
4392 | # Outputs. | |
4393 | global testfile binfile | |
4394 | ||
4395 | set testfile $gdb_test_file_name | |
4396 | set binfile [standard_output_file ${testfile}] | |
4397 | ||
4398 | if {[llength $args] == 0} { | |
4399 | set args .c | |
4400 | } | |
4401 | ||
686f09d0 TT |
4402 | # Unset our previous output variables. |
4403 | # This can help catch hidden bugs. | |
4404 | if {[info exists gdb_test_file_last_vars]} { | |
4405 | foreach varname $gdb_test_file_last_vars { | |
4406 | global $varname | |
4407 | catch {unset $varname} | |
4408 | } | |
4409 | } | |
4410 | # 'executable' is often set by tests. | |
4411 | set gdb_test_file_last_vars {executable} | |
4412 | ||
0a6d0306 TT |
4413 | set suffix "" |
4414 | foreach arg $args { | |
4415 | set varname srcfile$suffix | |
4416 | global $varname | |
4417 | ||
4418 | # Handle an extension. | |
4419 | if {$arg == ""} { | |
4420 | set arg $testfile.c | |
4421 | } elseif {[string range $arg 0 0] == "."} { | |
4422 | set arg $testfile$arg | |
4423 | } | |
4424 | ||
4425 | set $varname $arg | |
686f09d0 | 4426 | lappend gdb_test_file_last_vars $varname |
0a6d0306 TT |
4427 | |
4428 | if {$suffix == ""} { | |
4429 | set suffix 2 | |
4430 | } else { | |
4431 | incr suffix | |
4432 | } | |
4433 | } | |
4434 | } | |
4435 | ||
7b356089 JB |
4436 | # The default timeout used when testing GDB commands. We want to use |
4437 | # the same timeout as the default dejagnu timeout, unless the user has | |
4438 | # already provided a specific value (probably through a site.exp file). | |
4439 | global gdb_test_timeout | |
4440 | if ![info exists gdb_test_timeout] { | |
4441 | set gdb_test_timeout $timeout | |
4442 | } | |
4443 | ||
47050449 JB |
4444 | # A list of global variables that GDB testcases should not use. |
4445 | # We try to prevent their use by monitoring write accesses and raising | |
4446 | # an error when that happens. | |
4447 | set banned_variables { bug_id prms_id } | |
4448 | ||
abcc4978 PA |
4449 | # A list of procedures that GDB testcases should not use. |
4450 | # We try to prevent their use by monitoring invocations and raising | |
4451 | # an error when that happens. | |
4452 | set banned_procedures { strace } | |
4453 | ||
41b2c92d PM |
4454 | # gdb_init is called by runtest at start, but also by several |
4455 | # tests directly; gdb_finish is only called from within runtest after | |
4456 | # each test source execution. | |
4457 | # Placing several traces by repetitive calls to gdb_init leads | |
4458 | # to problems, as only one trace is removed in gdb_finish. | |
4459 | # To overcome this possible problem, we add a variable that records | |
abcc4978 PA |
4460 | # if the banned variables and procedures are already traced. |
4461 | set banned_traced 0 | |
41b2c92d | 4462 | |
73c9764f | 4463 | proc gdb_init { test_file_name } { |
7b356089 JB |
4464 | # Reset the timeout value to the default. This way, any testcase |
4465 | # that changes the timeout value without resetting it cannot affect | |
4466 | # the timeout used in subsequent testcases. | |
4467 | global gdb_test_timeout | |
4468 | global timeout | |
4469 | set timeout $gdb_test_timeout | |
4470 | ||
8b696e31 YQ |
4471 | if { [regexp ".*gdb\.reverse\/.*" $test_file_name] |
4472 | && [target_info exists gdb_reverse_timeout] } { | |
4473 | set timeout [target_info gdb_reverse_timeout] | |
4474 | } | |
4475 | ||
5e92f71a TT |
4476 | # If GDB_INOTIFY is given, check for writes to '.'. This is a |
4477 | # debugging tool to help confirm that the test suite is | |
4478 | # parallel-safe. You need "inotifywait" from the | |
4479 | # inotify-tools package to use this. | |
4480 | global GDB_INOTIFY inotify_pid | |
4481 | if {[info exists GDB_INOTIFY] && ![info exists inotify_pid]} { | |
4482 | global outdir tool inotify_log_file | |
4483 | ||
4484 | set exclusions {outputs temp gdb[.](log|sum) cache} | |
4485 | set exclusion_re ([join $exclusions |]) | |
4486 | ||
4487 | set inotify_log_file [standard_temp_file inotify.out] | |
4488 | set inotify_pid [exec inotifywait -r -m -e move,create,delete . \ | |
4489 | --exclude $exclusion_re \ | |
4490 | |& tee -a $outdir/$tool.log $inotify_log_file &] | |
4491 | ||
4492 | # Wait for the watches; hopefully this is long enough. | |
4493 | sleep 2 | |
4494 | ||
4495 | # Clear the log so that we don't emit a warning the first time | |
4496 | # we check it. | |
4497 | set fd [open $inotify_log_file w] | |
4498 | close $fd | |
4499 | } | |
4500 | ||
abcc4978 PA |
4501 | # Block writes to all banned variables, and invocation of all |
4502 | # banned procedures... | |
47050449 | 4503 | global banned_variables |
abcc4978 PA |
4504 | global banned_procedures |
4505 | global banned_traced | |
4506 | if (!$banned_traced) { | |
41b2c92d PM |
4507 | foreach banned_var $banned_variables { |
4508 | global "$banned_var" | |
4509 | trace add variable "$banned_var" write error | |
4510 | } | |
abcc4978 PA |
4511 | foreach banned_proc $banned_procedures { |
4512 | global "$banned_proc" | |
4513 | trace add execution "$banned_proc" enter error | |
4514 | } | |
4515 | set banned_traced 1 | |
47050449 JB |
4516 | } |
4517 | ||
e7ab5e63 AB |
4518 | # We set LC_ALL, LC_CTYPE, and LANG to C so that we get the same |
4519 | # messages as expected. | |
c6f2ac43 | 4520 | setenv LC_ALL C |
e7ab5e63 | 4521 | setenv LC_CTYPE C |
c6f2ac43 PA |
4522 | setenv LANG C |
4523 | ||
e7ab5e63 AB |
4524 | # Don't let a .inputrc file or an existing setting of INPUTRC mess up |
4525 | # the test results. Even if /dev/null doesn't exist on the particular | |
4526 | # platform, the readline library will use the default setting just by | |
4527 | # failing to open the file. OTOH, opening /dev/null successfully will | |
4528 | # also result in the default settings being used since nothing will be | |
4529 | # read from this file. | |
4530 | setenv INPUTRC "/dev/null" | |
4531 | ||
4532 | # The gdb.base/readline.exp arrow key test relies on the standard VT100 | |
4533 | # bindings, so make sure that an appropriate terminal is selected. | |
4534 | # The same bug doesn't show up if we use ^P / ^N instead. | |
4535 | setenv TERM "vt100" | |
4536 | ||
4537 | # Some tests (for example gdb.base/maint.exp) shell out from gdb to use | |
e4b8388f | 4538 | # grep. Clear GREP_OPTIONS to make the behavior predictable, |
e7ab5e63 AB |
4539 | # especially having color output turned on can cause tests to fail. |
4540 | setenv GREP_OPTIONS "" | |
4541 | ||
03f2bd59 JK |
4542 | # Clear $gdbserver_reconnect_p. |
4543 | global gdbserver_reconnect_p | |
4544 | set gdbserver_reconnect_p 1 | |
4545 | unset gdbserver_reconnect_p | |
4546 | ||
73c9764f | 4547 | return [default_gdb_init $test_file_name] |
c906108c SS |
4548 | } |
4549 | ||
4550 | proc gdb_finish { } { | |
a35cfb40 MR |
4551 | global gdbserver_reconnect_p |
4552 | global gdb_prompt | |
93f02886 DJ |
4553 | global cleanfiles |
4554 | ||
4555 | # Exit first, so that the files are no longer in use. | |
4556 | gdb_exit | |
4557 | ||
4558 | if { [llength $cleanfiles] > 0 } { | |
4559 | eval remote_file target delete $cleanfiles | |
4560 | set cleanfiles {} | |
4561 | } | |
47050449 JB |
4562 | |
4563 | # Unblock write access to the banned variables. Dejagnu typically | |
4564 | # resets some of them between testcases. | |
4565 | global banned_variables | |
abcc4978 PA |
4566 | global banned_procedures |
4567 | global banned_traced | |
4568 | if ($banned_traced) { | |
41b2c92d PM |
4569 | foreach banned_var $banned_variables { |
4570 | global "$banned_var" | |
4571 | trace remove variable "$banned_var" write error | |
4572 | } | |
abcc4978 PA |
4573 | foreach banned_proc $banned_procedures { |
4574 | global "$banned_proc" | |
4575 | trace remove execution "$banned_proc" enter error | |
4576 | } | |
4577 | set banned_traced 0 | |
47050449 | 4578 | } |
c906108c SS |
4579 | } |
4580 | ||
4581 | global debug_format | |
7a292a7a | 4582 | set debug_format "unknown" |
c906108c SS |
4583 | |
4584 | # Run the gdb command "info source" and extract the debugging format | |
4585 | # information from the output and save it in debug_format. | |
4586 | ||
4587 | proc get_debug_format { } { | |
4588 | global gdb_prompt | |
4589 | global verbose | |
4590 | global expect_out | |
4591 | global debug_format | |
4592 | ||
4593 | set debug_format "unknown" | |
4594 | send_gdb "info source\n" | |
4595 | gdb_expect 10 { | |
919d772c | 4596 | -re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" { |
c906108c SS |
4597 | set debug_format $expect_out(1,string) |
4598 | verbose "debug format is $debug_format" | |
ae59b1da | 4599 | return 1 |
c906108c SS |
4600 | } |
4601 | -re "No current source file.\r\n$gdb_prompt $" { | |
4602 | perror "get_debug_format used when no current source file" | |
ae59b1da | 4603 | return 0 |
c906108c SS |
4604 | } |
4605 | -re "$gdb_prompt $" { | |
4606 | warning "couldn't check debug format (no valid response)." | |
ae59b1da | 4607 | return 1 |
c906108c SS |
4608 | } |
4609 | timeout { | |
975531db | 4610 | warning "couldn't check debug format (timeout)." |
ae59b1da | 4611 | return 1 |
c906108c SS |
4612 | } |
4613 | } | |
4614 | } | |
4615 | ||
838ae6c4 JB |
4616 | # Return true if FORMAT matches the debug format the current test was |
4617 | # compiled with. FORMAT is a shell-style globbing pattern; it can use | |
4618 | # `*', `[...]', and so on. | |
4619 | # | |
4620 | # This function depends on variables set by `get_debug_format', above. | |
4621 | ||
4622 | proc test_debug_format {format} { | |
4623 | global debug_format | |
4624 | ||
4625 | return [expr [string match $format $debug_format] != 0] | |
4626 | } | |
4627 | ||
c906108c SS |
4628 | # Like setup_xfail, but takes the name of a debug format (DWARF 1, |
4629 | # COFF, stabs, etc). If that format matches the format that the | |
4630 | # current test was compiled with, then the next test is expected to | |
4631 | # fail for any target. Returns 1 if the next test or set of tests is | |
4632 | # expected to fail, 0 otherwise (or if it is unknown). Must have | |
4633 | # previously called get_debug_format. | |
b55a4771 | 4634 | proc setup_xfail_format { format } { |
4ec70201 | 4635 | set ret [test_debug_format $format] |
b55a4771 | 4636 | |
838ae6c4 | 4637 | if {$ret} then { |
b55a4771 MS |
4638 | setup_xfail "*-*-*" |
4639 | } | |
ae59b1da | 4640 | return $ret |
b55a4771 | 4641 | } |
c906108c | 4642 | |
c6fee705 MC |
4643 | # gdb_get_line_number TEXT [FILE] |
4644 | # | |
4645 | # Search the source file FILE, and return the line number of the | |
0d7941a9 | 4646 | # first line containing TEXT. If no match is found, an error is thrown. |
c6fee705 MC |
4647 | # |
4648 | # TEXT is a string literal, not a regular expression. | |
4649 | # | |
4650 | # The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is | |
4651 | # specified, and does not start with "/", then it is assumed to be in | |
4652 | # "$srcdir/$subdir". This is awkward, and can be fixed in the future, | |
4653 | # by changing the callers and the interface at the same time. | |
4654 | # In particular: gdb.base/break.exp, gdb.base/condbreak.exp, | |
4655 | # gdb.base/ena-dis-br.exp. | |
4656 | # | |
4657 | # Use this function to keep your test scripts independent of the | |
4658 | # exact line numbering of the source file. Don't write: | |
4659 | # | |
4660 | # send_gdb "break 20" | |
4661 | # | |
4662 | # This means that if anyone ever edits your test's source file, | |
4663 | # your test could break. Instead, put a comment like this on the | |
4664 | # source file line you want to break at: | |
4665 | # | |
4666 | # /* breakpoint spot: frotz.exp: test name */ | |
4667 | # | |
4668 | # and then write, in your test script (which we assume is named | |
4669 | # frotz.exp): | |
4670 | # | |
4671 | # send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n" | |
4672 | # | |
4673 | # (Yes, Tcl knows how to handle the nested quotes and brackets. | |
4674 | # Try this: | |
4675 | # $ tclsh | |
4676 | # % puts "foo [lindex "bar baz" 1]" | |
4677 | # foo baz | |
4678 | # % | |
4679 | # Tcl is quite clever, for a little stringy language.) | |
4680 | # | |
4681 | # === | |
4682 | # | |
4683 | # The previous implementation of this procedure used the gdb search command. | |
4684 | # This version is different: | |
4685 | # | |
4686 | # . It works with MI, and it also works when gdb is not running. | |
4687 | # | |
4688 | # . It operates on the build machine, not the host machine. | |
4689 | # | |
4690 | # . For now, this implementation fakes a current directory of | |
4691 | # $srcdir/$subdir to be compatible with the old implementation. | |
4692 | # This will go away eventually and some callers will need to | |
4693 | # be changed. | |
4694 | # | |
4695 | # . The TEXT argument is literal text and matches literally, | |
4696 | # not a regular expression as it was before. | |
4697 | # | |
4698 | # . State changes in gdb, such as changing the current file | |
4699 | # and setting $_, no longer happen. | |
4700 | # | |
4701 | # After a bit of time we can forget about the differences from the | |
4702 | # old implementation. | |
4703 | # | |
4704 | # --chastain 2004-08-05 | |
4705 | ||
4706 | proc gdb_get_line_number { text { file "" } } { | |
4707 | global srcdir | |
4708 | global subdir | |
4709 | global srcfile | |
c906108c | 4710 | |
c6fee705 MC |
4711 | if { "$file" == "" } then { |
4712 | set file "$srcfile" | |
4713 | } | |
4714 | if { ! [regexp "^/" "$file"] } then { | |
4715 | set file "$srcdir/$subdir/$file" | |
c906108c SS |
4716 | } |
4717 | ||
c6fee705 | 4718 | if { [ catch { set fd [open "$file"] } message ] } then { |
0d7941a9 | 4719 | error "$message" |
c906108c | 4720 | } |
c6fee705 MC |
4721 | |
4722 | set found -1 | |
4723 | for { set line 1 } { 1 } { incr line } { | |
4724 | if { [ catch { set nchar [gets "$fd" body] } message ] } then { | |
0d7941a9 | 4725 | error "$message" |
c6fee705 MC |
4726 | } |
4727 | if { $nchar < 0 } then { | |
4728 | break | |
4729 | } | |
4730 | if { [string first "$text" "$body"] >= 0 } then { | |
4731 | set found $line | |
4732 | break | |
4733 | } | |
4734 | } | |
4735 | ||
4736 | if { [ catch { close "$fd" } message ] } then { | |
0d7941a9 KS |
4737 | error "$message" |
4738 | } | |
4739 | ||
4740 | if {$found == -1} { | |
4741 | error "undefined tag \"$text\"" | |
c6fee705 MC |
4742 | } |
4743 | ||
4744 | return $found | |
c906108c SS |
4745 | } |
4746 | ||
b477a5e6 PA |
4747 | # Continue the program until it ends. |
4748 | # | |
fda326dd TT |
4749 | # MSSG is the error message that gets printed. If not given, a |
4750 | # default is used. | |
4751 | # COMMAND is the command to invoke. If not given, "continue" is | |
4752 | # used. | |
eceb0c5f TT |
4753 | # ALLOW_EXTRA is a flag indicating whether the test should expect |
4754 | # extra output between the "Continuing." line and the program | |
4755 | # exiting. By default it is zero; if nonzero, any extra output | |
4756 | # is accepted. | |
fda326dd | 4757 | |
eceb0c5f | 4758 | proc gdb_continue_to_end {{mssg ""} {command continue} {allow_extra 0}} { |
e11ac3a3 | 4759 | global inferior_exited_re use_gdb_stub |
7a292a7a | 4760 | |
fda326dd TT |
4761 | if {$mssg == ""} { |
4762 | set text "continue until exit" | |
4763 | } else { | |
4764 | set text "continue until exit at $mssg" | |
4765 | } | |
eceb0c5f TT |
4766 | if {$allow_extra} { |
4767 | set extra ".*" | |
4768 | } else { | |
4769 | set extra "" | |
4770 | } | |
b477a5e6 PA |
4771 | |
4772 | # By default, we don't rely on exit() behavior of remote stubs -- | |
4773 | # it's common for exit() to be implemented as a simple infinite | |
4774 | # loop, or a forced crash/reset. For native targets, by default, we | |
4775 | # assume process exit is reported as such. If a non-reliable target | |
4776 | # is used, we set a breakpoint at exit, and continue to that. | |
4777 | if { [target_info exists exit_is_reliable] } { | |
4778 | set exit_is_reliable [target_info exit_is_reliable] | |
4779 | } else { | |
4780 | set exit_is_reliable [expr ! $use_gdb_stub] | |
4781 | } | |
4782 | ||
4783 | if { ! $exit_is_reliable } { | |
7a292a7a SS |
4784 | if {![gdb_breakpoint "exit"]} { |
4785 | return 0 | |
4786 | } | |
eceb0c5f | 4787 | gdb_test $command "Continuing..*Breakpoint .*exit.*" \ |
fda326dd | 4788 | $text |
7a292a7a SS |
4789 | } else { |
4790 | # Continue until we exit. Should not stop again. | |
4791 | # Don't bother to check the output of the program, that may be | |
4792 | # extremely tough for some remote systems. | |
eceb0c5f TT |
4793 | gdb_test $command \ |
4794 | "Continuing.\[\r\n0-9\]+${extra}(... EXIT code 0\[\r\n\]+|$inferior_exited_re normally).*"\ | |
fda326dd | 4795 | $text |
7a292a7a SS |
4796 | } |
4797 | } | |
4798 | ||
4799 | proc rerun_to_main {} { | |
e11ac3a3 | 4800 | global gdb_prompt use_gdb_stub |
7a292a7a | 4801 | |
e11ac3a3 | 4802 | if $use_gdb_stub { |
7a292a7a SS |
4803 | gdb_run_cmd |
4804 | gdb_expect { | |
4805 | -re ".*Breakpoint .*main .*$gdb_prompt $"\ | |
4806 | {pass "rerun to main" ; return 0} | |
4807 | -re "$gdb_prompt $"\ | |
4808 | {fail "rerun to main" ; return 0} | |
4809 | timeout {fail "(timeout) rerun to main" ; return 0} | |
4810 | } | |
4811 | } else { | |
4812 | send_gdb "run\n" | |
4813 | gdb_expect { | |
11350d2a CV |
4814 | -re "The program .* has been started already.*y or n. $" { |
4815 | send_gdb "y\n" | |
4816 | exp_continue | |
4817 | } | |
7a292a7a SS |
4818 | -re "Starting program.*$gdb_prompt $"\ |
4819 | {pass "rerun to main" ; return 0} | |
4820 | -re "$gdb_prompt $"\ | |
4821 | {fail "rerun to main" ; return 0} | |
4822 | timeout {fail "(timeout) rerun to main" ; return 0} | |
4823 | } | |
4824 | } | |
4825 | } | |
c906108c | 4826 | |
13a5e3b8 MS |
4827 | # Print a message and return true if a test should be skipped |
4828 | # due to lack of floating point suport. | |
4829 | ||
4830 | proc gdb_skip_float_test { msg } { | |
4831 | if [target_info exists gdb,skip_float_tests] { | |
4ec70201 | 4832 | verbose "Skipping test '$msg': no float tests." |
ae59b1da | 4833 | return 1 |
13a5e3b8 | 4834 | } |
ae59b1da | 4835 | return 0 |
13a5e3b8 MS |
4836 | } |
4837 | ||
4838 | # Print a message and return true if a test should be skipped | |
4839 | # due to lack of stdio support. | |
4840 | ||
4841 | proc gdb_skip_stdio_test { msg } { | |
4842 | if [target_info exists gdb,noinferiorio] { | |
4ec70201 | 4843 | verbose "Skipping test '$msg': no inferior i/o." |
ae59b1da | 4844 | return 1 |
13a5e3b8 | 4845 | } |
ae59b1da | 4846 | return 0 |
13a5e3b8 MS |
4847 | } |
4848 | ||
4849 | proc gdb_skip_bogus_test { msg } { | |
ae59b1da | 4850 | return 0 |
13a5e3b8 MS |
4851 | } |
4852 | ||
e515b470 DJ |
4853 | # Return true if a test should be skipped due to lack of XML support |
4854 | # in the host GDB. | |
d0ef5df8 | 4855 | # NOTE: This must be called while gdb is *not* running. |
e515b470 | 4856 | |
17e1c970 | 4857 | gdb_caching_proc gdb_skip_xml_test { |
e515b470 DJ |
4858 | global gdb_prompt |
4859 | global srcdir | |
e515b470 | 4860 | |
b22089ab YQ |
4861 | set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"] |
4862 | ||
e515b470 | 4863 | gdb_start |
17e1c970 | 4864 | set xml_missing 0 |
b22089ab | 4865 | gdb_test_multiple "set tdesc filename $xml_file" "" { |
e515b470 | 4866 | -re ".*XML support was disabled at compile time.*$gdb_prompt $" { |
17e1c970 | 4867 | set xml_missing 1 |
e515b470 DJ |
4868 | } |
4869 | -re ".*$gdb_prompt $" { } | |
4870 | } | |
4871 | gdb_exit | |
17e1c970 | 4872 | return $xml_missing |
e515b470 | 4873 | } |
1f8a6abb | 4874 | |
673dc4a0 YQ |
4875 | # Return true if argv[0] is available. |
4876 | ||
4877 | gdb_caching_proc gdb_has_argv0 { | |
4878 | set result 0 | |
4879 | ||
4880 | # Set up, compile, and execute a test program to check whether | |
4881 | # argv[0] is available. | |
4882 | set src [standard_temp_file has_argv0[pid].c] | |
4883 | set exe [standard_temp_file has_argv0[pid].x] | |
4884 | ||
4885 | gdb_produce_source $src { | |
4886 | int main (int argc, char **argv) { | |
4887 | return 0; | |
4888 | } | |
4889 | } | |
4890 | ||
4891 | gdb_compile $src $exe executable {debug} | |
4892 | ||
4893 | # Helper proc. | |
4894 | proc gdb_has_argv0_1 { exe } { | |
4895 | global srcdir subdir | |
4896 | global gdb_prompt hex | |
4897 | ||
4898 | gdb_exit | |
4899 | gdb_start | |
4900 | gdb_reinitialize_dir $srcdir/$subdir | |
4901 | gdb_load "$exe" | |
4902 | ||
4903 | # Set breakpoint on main. | |
4904 | gdb_test_multiple "break main" "break main" { | |
4905 | -re "Breakpoint.*${gdb_prompt} $" { | |
4906 | } | |
4907 | -re "${gdb_prompt} $" { | |
4908 | return 0 | |
4909 | } | |
4910 | } | |
4911 | ||
4912 | # Run to main. | |
4913 | gdb_run_cmd | |
4914 | gdb_test_multiple "" "run to main" { | |
4915 | -re "Breakpoint.*${gdb_prompt} $" { | |
4916 | } | |
4917 | -re "${gdb_prompt} $" { | |
4918 | return 0 | |
4919 | } | |
4920 | } | |
4921 | ||
c0ecb95f JK |
4922 | set old_elements "200" |
4923 | set test "show print elements" | |
4924 | gdb_test_multiple $test $test { | |
4925 | -re "Limit on string chars or array elements to print is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { | |
4926 | set old_elements $expect_out(1,string) | |
4927 | } | |
4928 | } | |
4929 | set old_repeats "200" | |
4930 | set test "show print repeats" | |
4931 | gdb_test_multiple $test $test { | |
4932 | -re "Threshold for repeated print elements is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { | |
4933 | set old_repeats $expect_out(1,string) | |
4934 | } | |
4935 | } | |
4936 | gdb_test_no_output "set print elements unlimited" "" | |
4937 | gdb_test_no_output "set print repeats unlimited" "" | |
4938 | ||
4939 | set retval 0 | |
673dc4a0 YQ |
4940 | # Check whether argc is 1. |
4941 | gdb_test_multiple "p argc" "p argc" { | |
4942 | -re " = 1\r\n${gdb_prompt} $" { | |
4943 | ||
4944 | gdb_test_multiple "p argv\[0\]" "p argv\[0\]" { | |
4945 | -re " = $hex \".*[file tail $exe]\"\r\n${gdb_prompt} $" { | |
c0ecb95f | 4946 | set retval 1 |
673dc4a0 YQ |
4947 | } |
4948 | -re "${gdb_prompt} $" { | |
673dc4a0 YQ |
4949 | } |
4950 | } | |
4951 | } | |
4952 | -re "${gdb_prompt} $" { | |
673dc4a0 YQ |
4953 | } |
4954 | } | |
c0ecb95f JK |
4955 | |
4956 | gdb_test_no_output "set print elements $old_elements" "" | |
4957 | gdb_test_no_output "set print repeats $old_repeats" "" | |
4958 | ||
4959 | return $retval | |
673dc4a0 YQ |
4960 | } |
4961 | ||
4962 | set result [gdb_has_argv0_1 $exe] | |
4963 | ||
4964 | gdb_exit | |
4965 | file delete $src | |
4966 | file delete $exe | |
4967 | ||
4968 | if { !$result | |
4969 | && ([istarget *-*-linux*] | |
4970 | || [istarget *-*-freebsd*] || [istarget *-*-kfreebsd*] | |
4971 | || [istarget *-*-netbsd*] || [istarget *-*-knetbsd*] | |
4972 | || [istarget *-*-openbsd*] | |
4973 | || [istarget *-*-darwin*] | |
4974 | || [istarget *-*-solaris*] | |
4975 | || [istarget *-*-aix*] | |
4976 | || [istarget *-*-gnu*] | |
4977 | || [istarget *-*-cygwin*] || [istarget *-*-mingw32*] | |
4978 | || [istarget *-*-*djgpp*] || [istarget *-*-go32*] | |
4979 | || [istarget *-wince-pe] || [istarget *-*-mingw32ce*] | |
4980 | || [istarget *-*-symbianelf*] | |
4981 | || [istarget *-*-osf*] | |
673dc4a0 YQ |
4982 | || [istarget *-*-dicos*] |
4983 | || [istarget *-*-nto*] | |
4984 | || [istarget *-*-*vms*] | |
4985 | || [istarget *-*-lynx*178]) } { | |
4986 | fail "argv\[0\] should be available on this target" | |
4987 | } | |
4988 | ||
4989 | return $result | |
4990 | } | |
4991 | ||
1f8a6abb EZ |
4992 | # Note: the procedure gdb_gnu_strip_debug will produce an executable called |
4993 | # ${binfile}.dbglnk, which is just like the executable ($binfile) but without | |
4994 | # the debuginfo. Instead $binfile has a .gnu_debuglink section which contains | |
8e1d0c49 JK |
4995 | # the name of a debuginfo only file. This file will be stored in the same |
4996 | # subdirectory. | |
1f8a6abb EZ |
4997 | |
4998 | # Functions for separate debug info testing | |
4999 | ||
5000 | # starting with an executable: | |
5001 | # foo --> original executable | |
5002 | ||
5003 | # at the end of the process we have: | |
5004 | # foo.stripped --> foo w/o debug info | |
8e1d0c49 | 5005 | # foo.debug --> foo's debug info |
1f8a6abb EZ |
5006 | # foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug. |
5007 | ||
7c50a931 DE |
5008 | # Fetch the build id from the file. |
5009 | # Returns "" if there is none. | |
5010 | ||
5011 | proc get_build_id { filename } { | |
c74f7d1c JT |
5012 | if { ([istarget "*-*-mingw*"] |
5013 | || [istarget *-*-cygwin*]) } { | |
5014 | set objdump_program [gdb_find_objdump] | |
5015 | set result [catch {set data [exec $objdump_program -p $filename | grep signature | cut "-d " -f4]} output] | |
5016 | verbose "result is $result" | |
5017 | verbose "output is $output" | |
5018 | if {$result == 1} { | |
5019 | return "" | |
5020 | } | |
5021 | return $data | |
92046791 | 5022 | } else { |
c74f7d1c JT |
5023 | set tmp [standard_output_file "${filename}-tmp"] |
5024 | set objcopy_program [gdb_find_objcopy] | |
5025 | set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $filename $tmp" output] | |
5026 | verbose "result is $result" | |
5027 | verbose "output is $output" | |
5028 | if {$result == 1} { | |
5029 | return "" | |
5030 | } | |
5031 | set fi [open $tmp] | |
5032 | fconfigure $fi -translation binary | |
5033 | # Skip the NOTE header. | |
5034 | read $fi 16 | |
5035 | set data [read $fi] | |
5036 | close $fi | |
5037 | file delete $tmp | |
5038 | if ![string compare $data ""] then { | |
5039 | return "" | |
5040 | } | |
5041 | # Convert it to hex. | |
5042 | binary scan $data H* data | |
5043 | return $data | |
4935890f | 5044 | } |
7c50a931 DE |
5045 | } |
5046 | ||
5047 | # Return the build-id hex string (usually 160 bits as 40 hex characters) | |
5048 | # converted to the form: .build-id/ab/cdef1234...89.debug | |
5049 | # Return "" if no build-id found. | |
5050 | proc build_id_debug_filename_get { filename } { | |
5051 | set data [get_build_id $filename] | |
5052 | if { $data == "" } { | |
5053 | return "" | |
5054 | } | |
061b5285 | 5055 | regsub {^..} $data {\0/} data |
ae59b1da | 5056 | return ".build-id/${data}.debug" |
4935890f JK |
5057 | } |
5058 | ||
94277a38 DJ |
5059 | # Create stripped files for DEST, replacing it. If ARGS is passed, it is a |
5060 | # list of optional flags. The only currently supported flag is no-main, | |
5061 | # which removes the symbol entry for main from the separate debug file. | |
c0201579 JK |
5062 | # |
5063 | # Function returns zero on success. Function will return non-zero failure code | |
5064 | # on some targets not supporting separate debug info (such as i386-msdos). | |
1f8a6abb | 5065 | |
94277a38 DJ |
5066 | proc gdb_gnu_strip_debug { dest args } { |
5067 | ||
8e1d0c49 JK |
5068 | # Use the first separate debug info file location searched by GDB so the |
5069 | # run cannot be broken by some stale file searched with higher precedence. | |
5070 | set debug_file "${dest}.debug" | |
5071 | ||
b741e217 | 5072 | set strip_to_file_program [transform strip] |
4fa7d390 | 5073 | set objcopy_program [gdb_find_objcopy] |
1f8a6abb | 5074 | |
1f8a6abb EZ |
5075 | set debug_link [file tail $debug_file] |
5076 | set stripped_file "${dest}.stripped" | |
5077 | ||
5078 | # Get rid of the debug info, and store result in stripped_file | |
5079 | # something like gdb/testsuite/gdb.base/blah.stripped. | |
5080 | set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output] | |
5081 | verbose "result is $result" | |
5082 | verbose "output is $output" | |
5083 | if {$result == 1} { | |
5084 | return 1 | |
5085 | } | |
5086 | ||
d521f563 JK |
5087 | # Workaround PR binutils/10802: |
5088 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). | |
5089 | set perm [file attributes ${dest} -permissions] | |
5090 | file attributes ${stripped_file} -permissions $perm | |
5091 | ||
1f8a6abb EZ |
5092 | # Get rid of everything but the debug info, and store result in debug_file |
5093 | # This will be in the .debug subdirectory, see above. | |
5094 | set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output] | |
5095 | verbose "result is $result" | |
5096 | verbose "output is $output" | |
5097 | if {$result == 1} { | |
5098 | return 1 | |
5099 | } | |
5100 | ||
94277a38 DJ |
5101 | # If no-main is passed, strip the symbol for main from the separate |
5102 | # file. This is to simulate the behavior of elfutils's eu-strip, which | |
5103 | # leaves the symtab in the original file only. There's no way to get | |
5104 | # objcopy or strip to remove the symbol table without also removing the | |
5105 | # debugging sections, so this is as close as we can get. | |
5106 | if { [llength $args] == 1 && [lindex $args 0] == "no-main" } { | |
5107 | set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output] | |
5108 | verbose "result is $result" | |
5109 | verbose "output is $output" | |
5110 | if {$result == 1} { | |
5111 | return 1 | |
5112 | } | |
5113 | file delete "${debug_file}" | |
5114 | file rename "${debug_file}-tmp" "${debug_file}" | |
5115 | } | |
5116 | ||
1f8a6abb EZ |
5117 | # Link the two previous output files together, adding the .gnu_debuglink |
5118 | # section to the stripped_file, containing a pointer to the debug_file, | |
5119 | # save the new file in dest. | |
5120 | # This will be the regular executable filename, in the usual location. | |
5121 | set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output] | |
5122 | verbose "result is $result" | |
5123 | verbose "output is $output" | |
5124 | if {$result == 1} { | |
5125 | return 1 | |
5126 | } | |
5127 | ||
d521f563 JK |
5128 | # Workaround PR binutils/10802: |
5129 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). | |
5130 | set perm [file attributes ${stripped_file} -permissions] | |
5131 | file attributes ${dest} -permissions $perm | |
5132 | ||
5133 | return 0 | |
1f8a6abb EZ |
5134 | } |
5135 | ||
d8295fe9 VP |
5136 | # Test the output of GDB_COMMAND matches the pattern obtained |
5137 | # by concatenating all elements of EXPECTED_LINES. This makes | |
5138 | # it possible to split otherwise very long string into pieces. | |
5139 | # If third argument is not empty, it's used as the name of the | |
5140 | # test to be printed on pass/fail. | |
5141 | proc help_test_raw { gdb_command expected_lines args } { | |
5142 | set message $gdb_command | |
5143 | if [llength $args]>0 then { | |
5144 | set message [lindex $args 0] | |
5145 | } | |
5146 | set expected_output [join $expected_lines ""] | |
5147 | gdb_test "${gdb_command}" "${expected_output}" $message | |
5148 | } | |
5149 | ||
6aee0d90 | 5150 | # Test the output of "help COMMAND_CLASS". EXPECTED_INITIAL_LINES |
d8295fe9 VP |
5151 | # are regular expressions that should match the beginning of output, |
5152 | # before the list of commands in that class. The presence of | |
5153 | # command list and standard epilogue will be tested automatically. | |
06f810bd MG |
5154 | # Notice that the '[' and ']' characters don't need to be escaped for strings |
5155 | # wrapped in {} braces. | |
d8295fe9 VP |
5156 | proc test_class_help { command_class expected_initial_lines args } { |
5157 | set l_stock_body { | |
06f810bd MG |
5158 | "List of commands\:.*[\r\n]+" |
5159 | "Type \"help\" followed by command name for full documentation\.[\r\n]+" | |
5160 | "Type \"apropos word\" to search for commands related to \"word\"\.[\r\n]+" | |
d8295fe9 VP |
5161 | "Command name abbreviations are allowed if unambiguous\." |
5162 | } | |
5163 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
5164 | ||
5165 | eval [list help_test_raw "help ${command_class}" $l_entire_body] $args | |
5166 | } | |
5167 | ||
5168 | # COMMAND_LIST should have either one element -- command to test, or | |
5169 | # two elements -- abbreviated command to test, and full command the first | |
5170 | # element is abbreviation of. | |
5171 | # The command must be a prefix command. EXPECTED_INITIAL_LINES | |
5172 | # are regular expressions that should match the beginning of output, | |
5173 | # before the list of subcommands. The presence of | |
5174 | # subcommand list and standard epilogue will be tested automatically. | |
5175 | proc test_prefix_command_help { command_list expected_initial_lines args } { | |
5176 | set command [lindex $command_list 0] | |
5177 | if {[llength $command_list]>1} { | |
5178 | set full_command [lindex $command_list 1] | |
5179 | } else { | |
5180 | set full_command $command | |
5181 | } | |
5182 | # Use 'list' and not just {} because we want variables to | |
5183 | # be expanded in this list. | |
5184 | set l_stock_body [list\ | |
5185 | "List of $full_command subcommands\:.*\[\r\n\]+"\ | |
5186 | "Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\ | |
5187 | "Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\ | |
5188 | "Command name abbreviations are allowed if unambiguous\."] | |
5189 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
5190 | if {[llength $args]>0} { | |
5191 | help_test_raw "help ${command}" $l_entire_body [lindex $args 0] | |
5192 | } else { | |
5193 | help_test_raw "help ${command}" $l_entire_body | |
5194 | } | |
5195 | } | |
dbc52822 | 5196 | |
85b4440a TT |
5197 | # Build executable named EXECUTABLE from specifications that allow |
5198 | # different options to be passed to different sub-compilations. | |
5199 | # TESTNAME is the name of the test; this is passed to 'untested' if | |
5200 | # something fails. | |
a0d3f2f5 SCR |
5201 | # OPTIONS is passed to the final link, using gdb_compile. If OPTIONS |
5202 | # contains the option "pthreads", then gdb_compile_pthreads is used. | |
85b4440a TT |
5203 | # ARGS is a flat list of source specifications, of the form: |
5204 | # { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... } | |
5205 | # Each SOURCE is compiled to an object file using its OPTIONS, | |
5206 | # using gdb_compile. | |
5207 | # Returns 0 on success, -1 on failure. | |
5208 | proc build_executable_from_specs {testname executable options args} { | |
dbc52822 VP |
5209 | global subdir |
5210 | global srcdir | |
dbc52822 | 5211 | |
0a6d0306 | 5212 | set binfile [standard_output_file $executable] |
dbc52822 | 5213 | |
fd961404 DE |
5214 | set info_options "" |
5215 | if { [lsearch -exact $options "c++"] >= 0 } { | |
5216 | set info_options "c++" | |
5217 | } | |
4c93b1db | 5218 | if [get_compiler_info ${info_options}] { |
dbc52822 VP |
5219 | return -1 |
5220 | } | |
a29a3fb7 | 5221 | |
a29a3fb7 GB |
5222 | set func gdb_compile |
5223 | set func_index [lsearch -regexp $options {^(pthreads|shlib|shlib_pthreads)$}] | |
5224 | if {$func_index != -1} { | |
5225 | set func "${func}_[lindex $options $func_index]" | |
5226 | } | |
5227 | ||
5228 | # gdb_compile_shlib and gdb_compile_shlib_pthreads do not use the 3rd | |
5229 | # parameter. They also requires $sources while gdb_compile and | |
5230 | # gdb_compile_pthreads require $objects. Moreover they ignore any options. | |
5231 | if [string match gdb_compile_shlib* $func] { | |
5232 | set sources_path {} | |
5233 | foreach {s local_options} $args { | |
0e5c4555 AA |
5234 | if { [regexp "^/" "$s"] } then { |
5235 | lappend sources_path "$s" | |
5236 | } else { | |
5237 | lappend sources_path "$srcdir/$subdir/$s" | |
5238 | } | |
a29a3fb7 GB |
5239 | } |
5240 | set ret [$func $sources_path "${binfile}" $options] | |
5241 | } else { | |
5242 | set objects {} | |
5243 | set i 0 | |
5244 | foreach {s local_options} $args { | |
0e5c4555 AA |
5245 | if { ! [regexp "^/" "$s"] } then { |
5246 | set s "$srcdir/$subdir/$s" | |
5247 | } | |
5248 | if { [gdb_compile "${s}" "${binfile}${i}.o" object $local_options] != "" } { | |
a29a3fb7 GB |
5249 | untested $testname |
5250 | return -1 | |
5251 | } | |
5252 | lappend objects "${binfile}${i}.o" | |
5253 | incr i | |
5254 | } | |
5255 | set ret [$func $objects "${binfile}" executable $options] | |
5256 | } | |
5257 | if { $ret != "" } { | |
5258 | untested $testname | |
5259 | return -1 | |
5260 | } | |
5261 | ||
dbc52822 VP |
5262 | return 0 |
5263 | } | |
5264 | ||
85b4440a TT |
5265 | # Build executable named EXECUTABLE, from SOURCES. If SOURCES are not |
5266 | # provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test | |
5267 | # to pass to untested, if something is wrong. OPTIONS are passed | |
5268 | # to gdb_compile directly. | |
5269 | proc build_executable { testname executable {sources ""} {options {debug}} } { | |
5270 | if {[llength $sources]==0} { | |
5271 | set sources ${executable}.c | |
5272 | } | |
5273 | ||
5274 | set arglist [list $testname $executable $options] | |
5275 | foreach source $sources { | |
5276 | lappend arglist $source $options | |
5277 | } | |
5278 | ||
5279 | return [eval build_executable_from_specs $arglist] | |
5280 | } | |
5281 | ||
7b606f95 DE |
5282 | # Starts fresh GDB binary and loads an optional executable into GDB. |
5283 | # Usage: clean_restart [executable] | |
5284 | # EXECUTABLE is the basename of the binary. | |
5285 | ||
5286 | proc clean_restart { args } { | |
dbc52822 | 5287 | global srcdir |
dbc52822 | 5288 | global subdir |
7b606f95 DE |
5289 | |
5290 | if { [llength $args] > 1 } { | |
5291 | error "bad number of args: [llength $args]" | |
5292 | } | |
dbc52822 VP |
5293 | |
5294 | gdb_exit | |
5295 | gdb_start | |
5296 | gdb_reinitialize_dir $srcdir/$subdir | |
7b606f95 DE |
5297 | |
5298 | if { [llength $args] >= 1 } { | |
5299 | set executable [lindex $args 0] | |
5300 | set binfile [standard_output_file ${executable}] | |
5301 | gdb_load ${binfile} | |
5302 | } | |
dbc52822 VP |
5303 | } |
5304 | ||
85b4440a TT |
5305 | # Prepares for testing by calling build_executable_full, then |
5306 | # clean_restart. | |
5307 | # TESTNAME is the name of the test. | |
5308 | # Each element in ARGS is a list of the form | |
5309 | # { EXECUTABLE OPTIONS SOURCE_SPEC... } | |
5310 | # These are passed to build_executable_from_specs, which see. | |
5311 | # The last EXECUTABLE is passed to clean_restart. | |
5312 | # Returns 0 on success, non-zero on failure. | |
5313 | proc prepare_for_testing_full {testname args} { | |
5314 | foreach spec $args { | |
5315 | if {[eval build_executable_from_specs [list $testname] $spec] == -1} { | |
5316 | return -1 | |
5317 | } | |
5318 | set executable [lindex $spec 0] | |
5319 | } | |
5320 | clean_restart $executable | |
5321 | return 0 | |
5322 | } | |
5323 | ||
dbc52822 VP |
5324 | # Prepares for testing, by calling build_executable, and then clean_restart. |
5325 | # Please refer to build_executable for parameter description. | |
5326 | proc prepare_for_testing { testname executable {sources ""} {options {debug}}} { | |
5327 | ||
734a5c36 | 5328 | if {[build_executable $testname $executable $sources $options] == -1} { |
dbc52822 VP |
5329 | return -1 |
5330 | } | |
5331 | clean_restart $executable | |
5332 | ||
5333 | return 0 | |
5334 | } | |
7065b901 TT |
5335 | |
5336 | proc get_valueof { fmt exp default } { | |
5337 | global gdb_prompt | |
5338 | ||
5339 | set test "get valueof \"${exp}\"" | |
5340 | set val ${default} | |
5341 | gdb_test_multiple "print${fmt} ${exp}" "$test" { | |
417e16e2 PM |
5342 | -re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" { |
5343 | set val $expect_out(1,string) | |
5344 | pass "$test ($val)" | |
5345 | } | |
5346 | timeout { | |
5347 | fail "$test (timeout)" | |
5348 | } | |
5349 | } | |
5350 | return ${val} | |
5351 | } | |
5352 | ||
5353 | proc get_integer_valueof { exp default } { | |
5354 | global gdb_prompt | |
5355 | ||
5356 | set test "get integer valueof \"${exp}\"" | |
5357 | set val ${default} | |
5358 | gdb_test_multiple "print /d ${exp}" "$test" { | |
7065b901 TT |
5359 | -re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" { |
5360 | set val $expect_out(1,string) | |
5361 | pass "$test ($val)" | |
5362 | } | |
5363 | timeout { | |
417e16e2 | 5364 | fail "$test (timeout)" |
7065b901 TT |
5365 | } |
5366 | } | |
5367 | return ${val} | |
5368 | } | |
5369 | ||
faafb047 PM |
5370 | proc get_hexadecimal_valueof { exp default } { |
5371 | global gdb_prompt | |
5372 | send_gdb "print /x ${exp}\n" | |
5373 | set test "get hexadecimal valueof \"${exp}\"" | |
5374 | gdb_expect { | |
5375 | -re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" { | |
5376 | set val $expect_out(1,string) | |
5377 | pass "$test" | |
5378 | } | |
5379 | timeout { | |
5380 | set val ${default} | |
5381 | fail "$test (timeout)" | |
5382 | } | |
5383 | } | |
5384 | return ${val} | |
5385 | } | |
417e16e2 | 5386 | |
7065b901 | 5387 | proc get_sizeof { type default } { |
417e16e2 | 5388 | return [get_integer_valueof "sizeof (${type})" $default] |
7065b901 TT |
5389 | } |
5390 | ||
ed3ef339 DE |
5391 | proc get_target_charset { } { |
5392 | global gdb_prompt | |
5393 | ||
5394 | gdb_test_multiple "show target-charset" "" { | |
5395 | -re "The target character set is \"auto; currently (\[^\"\]*)\".*$gdb_prompt $" { | |
5396 | return $expect_out(1,string) | |
5397 | } | |
5398 | -re "The target character set is \"(\[^\"\]*)\".*$gdb_prompt $" { | |
5399 | return $expect_out(1,string) | |
5400 | } | |
5401 | } | |
5402 | ||
5403 | # Pick a reasonable default. | |
5404 | warning "Unable to read target-charset." | |
5405 | return "UTF-8" | |
5406 | } | |
5407 | ||
db863c42 MF |
5408 | # Get the current value for remotetimeout and return it. |
5409 | proc get_remotetimeout { } { | |
5410 | global gdb_prompt | |
5411 | global decimal | |
5412 | ||
5413 | gdb_test_multiple "show remotetimeout" "" { | |
5414 | -re "Timeout limit to wait for target to respond is ($decimal).*$gdb_prompt $" { | |
ae59b1da | 5415 | return $expect_out(1,string) |
db863c42 MF |
5416 | } |
5417 | } | |
5418 | ||
5419 | # Pick the default that gdb uses | |
5420 | warning "Unable to read remotetimeout" | |
5421 | return 300 | |
5422 | } | |
5423 | ||
5424 | # Set the remotetimeout to the specified timeout. Nothing is returned. | |
5425 | proc set_remotetimeout { timeout } { | |
5426 | global gdb_prompt | |
5427 | ||
5428 | gdb_test_multiple "set remotetimeout $timeout" "" { | |
5429 | -re "$gdb_prompt $" { | |
5430 | verbose "Set remotetimeout to $timeout\n" | |
5431 | } | |
5432 | } | |
5433 | } | |
5434 | ||
1e537771 TT |
5435 | # ROOT and FULL are file names. Returns the relative path from ROOT |
5436 | # to FULL. Note that FULL must be in a subdirectory of ROOT. | |
5437 | # For example, given ROOT = /usr/bin and FULL = /usr/bin/ls, this | |
5438 | # will return "ls". | |
5439 | ||
5440 | proc relative_filename {root full} { | |
5441 | set root_split [file split $root] | |
5442 | set full_split [file split $full] | |
5443 | ||
5444 | set len [llength $root_split] | |
5445 | ||
5446 | if {[eval file join $root_split] | |
5447 | != [eval file join [lrange $full_split 0 [expr {$len - 1}]]]} { | |
5448 | error "$full not a subdir of $root" | |
5449 | } | |
5450 | ||
5451 | return [eval file join [lrange $full_split $len end]] | |
5452 | } | |
5453 | ||
812f7342 TT |
5454 | # Log gdb command line and script if requested. |
5455 | if {[info exists TRANSCRIPT]} { | |
5456 | rename send_gdb real_send_gdb | |
5457 | rename remote_spawn real_remote_spawn | |
5458 | rename remote_close real_remote_close | |
5459 | ||
5460 | global gdb_transcript | |
5461 | set gdb_transcript "" | |
5462 | ||
5463 | global gdb_trans_count | |
5464 | set gdb_trans_count 1 | |
5465 | ||
5466 | proc remote_spawn {args} { | |
5467 | global gdb_transcript gdb_trans_count outdir | |
5468 | ||
5469 | if {$gdb_transcript != ""} { | |
5470 | close $gdb_transcript | |
5471 | } | |
5472 | set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w] | |
5473 | puts $gdb_transcript [lindex $args 1] | |
5474 | incr gdb_trans_count | |
5475 | ||
5476 | return [uplevel real_remote_spawn $args] | |
5477 | } | |
5478 | ||
5479 | proc remote_close {args} { | |
5480 | global gdb_transcript | |
5481 | ||
5482 | if {$gdb_transcript != ""} { | |
5483 | close $gdb_transcript | |
5484 | set gdb_transcript "" | |
5485 | } | |
5486 | ||
5487 | return [uplevel real_remote_close $args] | |
5488 | } | |
5489 | ||
5490 | proc send_gdb {args} { | |
5491 | global gdb_transcript | |
5492 | ||
5493 | if {$gdb_transcript != ""} { | |
5494 | puts -nonewline $gdb_transcript [lindex $args 0] | |
5495 | } | |
5496 | ||
5497 | return [uplevel real_send_gdb $args] | |
5498 | } | |
5499 | } | |
37aeb5df | 5500 | |
5e92f71a TT |
5501 | # If GDB_PARALLEL exists, then set up the parallel-mode directories. |
5502 | if {[info exists GDB_PARALLEL]} { | |
5503 | if {[is_remote host]} { | |
5504 | unset GDB_PARALLEL | |
5505 | } else { | |
3d338901 DE |
5506 | file mkdir \ |
5507 | [make_gdb_parallel_path outputs] \ | |
5508 | [make_gdb_parallel_path temp] \ | |
5509 | [make_gdb_parallel_path cache] | |
5e92f71a TT |
5510 | } |
5511 | } | |
5512 | ||
bbfba9ed | 5513 | proc core_find {binfile {deletefiles {}} {arg ""}} { |
37aeb5df JK |
5514 | global objdir subdir |
5515 | ||
5516 | set destcore "$binfile.core" | |
5517 | file delete $destcore | |
5518 | ||
5519 | # Create a core file named "$destcore" rather than just "core", to | |
5520 | # avoid problems with sys admin types that like to regularly prune all | |
5521 | # files named "core" from the system. | |
5522 | # | |
5523 | # Arbitrarily try setting the core size limit to "unlimited" since | |
5524 | # this does not hurt on systems where the command does not work and | |
5525 | # allows us to generate a core on systems where it does. | |
5526 | # | |
5527 | # Some systems append "core" to the name of the program; others append | |
5528 | # the name of the program to "core"; still others (like Linux, as of | |
5529 | # May 2003) create cores named "core.PID". In the latter case, we | |
5530 | # could have many core files lying around, and it may be difficult to | |
5531 | # tell which one is ours, so let's run the program in a subdirectory. | |
5532 | set found 0 | |
93c0ef37 | 5533 | set coredir [standard_output_file coredir.[getpid]] |
37aeb5df | 5534 | file mkdir $coredir |
bbfba9ed | 5535 | catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\"" |
37aeb5df JK |
5536 | # remote_exec host "${binfile}" |
5537 | foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { | |
5538 | if [remote_file build exists $i] { | |
5539 | remote_exec build "mv $i $destcore" | |
5540 | set found 1 | |
5541 | } | |
5542 | } | |
5543 | # Check for "core.PID". | |
5544 | if { $found == 0 } { | |
5545 | set names [glob -nocomplain -directory $coredir core.*] | |
5546 | if {[llength $names] == 1} { | |
5547 | set corefile [file join $coredir [lindex $names 0]] | |
5548 | remote_exec build "mv $corefile $destcore" | |
5549 | set found 1 | |
5550 | } | |
5551 | } | |
5552 | if { $found == 0 } { | |
5553 | # The braindamaged HPUX shell quits after the ulimit -c above | |
5554 | # without executing ${binfile}. So we try again without the | |
5555 | # ulimit here if we didn't find a core file above. | |
5556 | # Oh, I should mention that any "braindamaged" non-Unix system has | |
5557 | # the same problem. I like the cd bit too, it's really neat'n stuff. | |
5558 | catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\"" | |
5559 | foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" { | |
5560 | if [remote_file build exists $i] { | |
5561 | remote_exec build "mv $i $destcore" | |
5562 | set found 1 | |
5563 | } | |
5564 | } | |
5565 | } | |
5566 | ||
5567 | # Try to clean up after ourselves. | |
5568 | foreach deletefile $deletefiles { | |
5569 | remote_file build delete [file join $coredir $deletefile] | |
5570 | } | |
5571 | remote_exec build "rmdir $coredir" | |
5572 | ||
5573 | if { $found == 0 } { | |
5574 | warning "can't generate a core file - core tests suppressed - check ulimit -c" | |
5575 | return "" | |
5576 | } | |
5577 | return $destcore | |
5578 | } | |
ee5683ab | 5579 | |
2223449a KB |
5580 | # gdb_target_symbol_prefix compiles a test program and then examines |
5581 | # the output from objdump to determine the prefix (such as underscore) | |
5582 | # for linker symbol prefixes. | |
5583 | ||
5584 | gdb_caching_proc gdb_target_symbol_prefix { | |
5585 | # Set up and compile a simple test program... | |
5586 | set src [standard_temp_file main[pid].c] | |
5587 | set exe [standard_temp_file main[pid].x] | |
5588 | ||
5589 | gdb_produce_source $src { | |
5590 | int main() { | |
5591 | return 0; | |
5592 | } | |
5593 | } | |
5594 | ||
5595 | verbose "compiling testfile $src" 2 | |
5596 | set compile_flags {debug nowarnings quiet} | |
5597 | set lines [gdb_compile $src $exe executable $compile_flags] | |
5598 | ||
5599 | set prefix "" | |
5600 | ||
5601 | if ![string match "" $lines] then { | |
5602 | verbose "gdb_target_symbol_prefix: testfile compilation failed, returning null prefix" 2 | |
5603 | } else { | |
5604 | set objdump_program [gdb_find_objdump] | |
5605 | set result [catch "exec $objdump_program --syms $exe" output] | |
5606 | ||
5607 | if { $result == 0 \ | |
5608 | && ![regexp -lineanchor \ | |
5609 | { ([^ a-zA-Z0-9]*)main$} $output dummy prefix] } { | |
5610 | verbose "gdb_target_symbol_prefix: Could not find main in objdump output; returning null prefix" 2 | |
5611 | } | |
5612 | } | |
5613 | ||
5614 | file delete $src | |
5615 | file delete $exe | |
5616 | ||
5617 | return $prefix | |
5618 | } | |
5619 | ||
5620 | # gdb_target_symbol returns the provided symbol with the correct prefix | |
5621 | # prepended. (See gdb_target_symbol_prefix, above.) | |
5622 | ||
5623 | proc gdb_target_symbol { symbol } { | |
5624 | set prefix [gdb_target_symbol_prefix] | |
5625 | return "${prefix}${symbol}" | |
5626 | } | |
5627 | ||
f01dcfd9 KB |
5628 | # gdb_target_symbol_prefix_flags_asm returns a string that can be |
5629 | # added to gdb_compile options to define the C-preprocessor macro | |
5630 | # SYMBOL_PREFIX with a value that can be prepended to symbols | |
5631 | # for targets which require a prefix, such as underscore. | |
5632 | # | |
5633 | # This version (_asm) defines the prefix without double quotes | |
5634 | # surrounding the prefix. It is used to define the macro | |
5635 | # SYMBOL_PREFIX for assembly language files. Another version, below, | |
5636 | # is used for symbols in inline assembler in C/C++ files. | |
5637 | # | |
5638 | # The lack of quotes in this version (_asm) makes it possible to | |
5639 | # define supporting macros in the .S file. (The version which | |
5640 | # uses quotes for the prefix won't work for such files since it's | |
5641 | # impossible to define a quote-stripping macro in C.) | |
5642 | # | |
5643 | # It's possible to use this version (_asm) for C/C++ source files too, | |
5644 | # but a string is usually required in such files; providing a version | |
5645 | # (no _asm) which encloses the prefix with double quotes makes it | |
5646 | # somewhat easier to define the supporting macros in the test case. | |
5647 | ||
5648 | proc gdb_target_symbol_prefix_flags_asm {} { | |
5649 | set prefix [gdb_target_symbol_prefix] | |
5650 | if {$prefix ne ""} { | |
5651 | return "additional_flags=-DSYMBOL_PREFIX=$prefix" | |
5652 | } else { | |
5653 | return ""; | |
5654 | } | |
5655 | } | |
5656 | ||
5657 | # gdb_target_symbol_prefix_flags returns the same string as | |
5658 | # gdb_target_symbol_prefix_flags_asm, above, but with the prefix | |
5659 | # enclosed in double quotes if there is a prefix. | |
5660 | # | |
5661 | # See the comment for gdb_target_symbol_prefix_flags_asm for an | |
5662 | # extended discussion. | |
ee5683ab PM |
5663 | |
5664 | proc gdb_target_symbol_prefix_flags {} { | |
f01dcfd9 KB |
5665 | set prefix [gdb_target_symbol_prefix] |
5666 | if {$prefix ne ""} { | |
5667 | return "additional_flags=-DSYMBOL_PREFIX=\"$prefix\"" | |
ee5683ab | 5668 | } else { |
f01dcfd9 | 5669 | return ""; |
ee5683ab PM |
5670 | } |
5671 | } | |
5672 | ||
6e45f158 DE |
5673 | # A wrapper for 'remote_exec host' that passes or fails a test. |
5674 | # Returns 0 if all went well, nonzero on failure. | |
5675 | # TEST is the name of the test, other arguments are as for remote_exec. | |
5676 | ||
5677 | proc run_on_host { test program args } { | |
5678 | verbose -log "run_on_host: $program $args" | |
5679 | # remote_exec doesn't work properly if the output is set but the | |
5680 | # input is the empty string -- so replace an empty input with | |
5681 | # /dev/null. | |
5682 | if {[llength $args] > 1 && [lindex $args 1] == ""} { | |
5683 | set args [lreplace $args 1 1 "/dev/null"] | |
5684 | } | |
5685 | set result [eval remote_exec host [list $program] $args] | |
5686 | verbose "result is $result" | |
5687 | set status [lindex $result 0] | |
5688 | set output [lindex $result 1] | |
5689 | if {$status == 0} { | |
5690 | pass $test | |
5691 | return 0 | |
5692 | } else { | |
50cc37c8 | 5693 | verbose -log "run_on_host failed: $output" |
6e45f158 DE |
5694 | fail $test |
5695 | return -1 | |
5696 | } | |
5697 | } | |
5698 | ||
a587b477 DE |
5699 | # Return non-zero if "board_info debug_flags" mentions Fission. |
5700 | # http://gcc.gnu.org/wiki/DebugFission | |
5701 | # Fission doesn't support everything yet. | |
5702 | # This supports working around bug 15954. | |
5703 | ||
5704 | proc using_fission { } { | |
5705 | set debug_flags [board_info [target_info name] debug_flags] | |
5706 | return [regexp -- "-gsplit-dwarf" $debug_flags] | |
5707 | } | |
5708 | ||
4b48d439 KS |
5709 | # Search the caller's ARGS list and set variables according to the list of |
5710 | # valid options described by ARGSET. | |
5711 | # | |
5712 | # The first member of each one- or two-element list in ARGSET defines the | |
5713 | # name of a variable that will be added to the caller's scope. | |
5714 | # | |
5715 | # If only one element is given to describe an option, it the value is | |
5716 | # 0 if the option is not present in (the caller's) ARGS or 1 if | |
5717 | # it is. | |
5718 | # | |
5719 | # If two elements are given, the second element is the default value of | |
5720 | # the variable. This is then overwritten if the option exists in ARGS. | |
5721 | # | |
5722 | # Any parse_args elements in (the caller's) ARGS will be removed, leaving | |
5723 | # any optional components. | |
5724 | ||
5725 | # Example: | |
5726 | # proc myproc {foo args} { | |
5727 | # parse_args {{bar} {baz "abc"} {qux}} | |
5728 | # # ... | |
5729 | # } | |
5730 | # myproc ABC -bar -baz DEF peanut butter | |
5731 | # will define the following variables in myproc: | |
5732 | # foo (=ABC), bar (=1), baz (=DEF), and qux (=0) | |
5733 | # args will be the list {peanut butter} | |
5734 | ||
5735 | proc parse_args { argset } { | |
5736 | upvar args args | |
5737 | ||
5738 | foreach argument $argset { | |
5739 | if {[llength $argument] == 1} { | |
5740 | # No default specified, so we assume that we should set | |
5741 | # the value to 1 if the arg is present and 0 if it's not. | |
5742 | # It is assumed that no value is given with the argument. | |
5743 | set result [lsearch -exact $args "-$argument"] | |
5744 | if {$result != -1} then { | |
5745 | uplevel 1 [list set $argument 1] | |
5746 | set args [lreplace $args $result $result] | |
5747 | } else { | |
5748 | uplevel 1 [list set $argument 0] | |
5749 | } | |
5750 | } elseif {[llength $argument] == 2} { | |
5751 | # There are two items in the argument. The second is a | |
5752 | # default value to use if the item is not present. | |
5753 | # Otherwise, the variable is set to whatever is provided | |
5754 | # after the item in the args. | |
5755 | set arg [lindex $argument 0] | |
5756 | set result [lsearch -exact $args "-[lindex $arg 0]"] | |
5757 | if {$result != -1} then { | |
5758 | uplevel 1 [list set $arg [lindex $args [expr $result+1]]] | |
5759 | set args [lreplace $args $result [expr $result+1]] | |
5760 | } else { | |
5761 | uplevel 1 [list set $arg [lindex $argument 1]] | |
5762 | } | |
5763 | } else { | |
5764 | error "Badly formatted argument \"$argument\" in argument set" | |
5765 | } | |
5766 | } | |
5767 | ||
5768 | # The remaining args should be checked to see that they match the | |
5769 | # number of items expected to be passed into the procedure... | |
5770 | } | |
5771 | ||
87f0e720 KS |
5772 | # Capture the output of COMMAND in a string ignoring PREFIX (a regexp); |
5773 | # return that string. | |
5774 | ||
e9089e05 MM |
5775 | proc capture_command_output { command prefix } { |
5776 | global gdb_prompt | |
5777 | global expect_out | |
5778 | ||
5779 | set output_string "" | |
5780 | gdb_test_multiple "$command" "capture_command_output for $command" { | |
87f0e720 | 5781 | -re "[string_to_regexp ${command}]\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $" { |
e9089e05 MM |
5782 | set output_string $expect_out(1,string) |
5783 | } | |
5784 | } | |
5785 | return $output_string | |
5786 | } | |
5787 | ||
3c724c8c PMR |
5788 | # A convenience function that joins all the arguments together, with a |
5789 | # regexp that matches exactly one end of line in between each argument. | |
5790 | # This function is ideal to write the expected output of a GDB command | |
5791 | # that generates more than a couple of lines, as this allows us to write | |
5792 | # each line as a separate string, which is easier to read by a human | |
5793 | # being. | |
5794 | ||
5795 | proc multi_line { args } { | |
5796 | return [join $args "\r\n"] | |
5797 | } | |
5798 | ||
42159ca5 TT |
5799 | # Always load compatibility stuff. |
5800 | load_lib future.exp |