Commit | Line | Data |
---|---|---|
13887249 SG |
1 | /* Copyright (C) 1990 Free Software Foundation, Inc. |
2 | ||
3 | This file is part of GDB. | |
4 | ||
5 | This program is free software; you can redistribute it and/or modify | |
6 | it under the terms of the GNU General Public License as published by | |
7 | the Free Software Foundation; either version 2 of the License, or | |
8 | (at your option) any later version. | |
9 | ||
10 | This program is distributed in the hope that it will be useful, | |
11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | GNU General Public License for more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License | |
16 | along with this program; if not, write to the Free Software | |
17 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
18 | ||
19 | #define TARGET_BYTE_ORDER BIG_ENDIAN | |
20 | ||
21 | /* Floating point is IEEE compliant */ | |
22 | #define IEEE_FLOAT | |
23 | ||
24 | /* Define this if the C compiler puts an underscore at the front | |
25 | of external names before giving them to the linker. */ | |
26 | ||
27 | /*#define NAMES_HAVE_UNDERSCORE*/ | |
28 | ||
29 | /* Debugger information will be in mips' format */ | |
30 | ||
31 | #define READ_MIPS_FORMAT | |
32 | ||
33 | /* File format is coff, but with additions */ | |
34 | ||
35 | #define COFF_FORMAT | |
36 | ||
37 | /* Offset from address of function to start of its code. | |
38 | Zero on most machines. */ | |
39 | ||
40 | #define FUNCTION_START_OFFSET 0 | |
41 | ||
42 | /* Advance PC across any function entry prologue instructions | |
43 | to reach some "real" code. */ | |
44 | ||
45 | #define SKIP_PROLOGUE(pc) pc = mips_skip_prologue(pc) | |
46 | ||
47 | /* Immediately after a function call, return the saved pc. | |
48 | Can't always go through the frames for this because on some machines | |
49 | the new frame is not set up until the new function executes | |
50 | some instructions. */ | |
51 | ||
52 | #define SAVED_PC_AFTER_CALL(frame) read_register(RA_REGNUM) | |
53 | ||
54 | /* Are we currently handling a signal */ | |
55 | ||
56 | #define IN_SIGTRAMP(pc, name) in_sigtramp(pc, name) | |
57 | ||
58 | /* Address of end of stack space. */ | |
59 | ||
60 | #define STACK_END_ADDR (0x7ffff000) | |
61 | ||
62 | /* Stack grows downward. */ | |
63 | ||
64 | #define INNER_THAN < | |
65 | ||
66 | #define BREAKPOINT {0, 0x5, 0, 0xd} | |
67 | ||
68 | /* Amount PC must be decremented by after a breakpoint. | |
69 | This is often the number of bytes in BREAKPOINT | |
70 | but not always. */ | |
71 | ||
72 | #define DECR_PC_AFTER_BREAK 0 | |
73 | ||
74 | /* Nonzero if instruction at PC is a return instruction. "j ra" on mips. */ | |
75 | ||
76 | #define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 4) == 0x3e00008) | |
77 | ||
78 | /* Return 1 if P points to an invalid floating point value. */ | |
79 | ||
80 | #define INVALID_FLOAT(p,l) isa_NAN(p,l) | |
81 | ||
82 | /* Say how long (all) registers are. */ | |
83 | ||
84 | #define REGISTER_TYPE long | |
85 | ||
86 | /* Number of machine registers */ | |
87 | ||
88 | #define NUM_REGS 71 | |
89 | ||
90 | /* Initializer for an array of names of registers. | |
91 | There should be NUM_REGS strings in this initializer. */ | |
92 | ||
93 | #define REGISTER_NAMES \ | |
94 | { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \ | |
95 | "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \ | |
96 | "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \ | |
97 | "t8", "t9", "k0", "k1", "gp", "sp", "fp", "ra", \ | |
98 | "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ | |
99 | "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ | |
100 | "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\ | |
101 | "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\ | |
102 | "pc", "cause", "bad", "hi", "lo", "fsr", "fir" \ | |
103 | } | |
104 | ||
105 | /* Register numbers of various important registers. | |
106 | Note that some of these values are "real" register numbers, | |
107 | and correspond to the general registers of the machine, | |
108 | and some are "phony" register numbers which are too large | |
109 | to be actual register numbers as far as the user is concerned | |
110 | but do serve to get the desired values when passed to read_register. */ | |
111 | ||
112 | #define SP_REGNUM 29 /* Contains address of top of stack */ | |
113 | #define FP_REGNUM 30 /* Pseudo register that contains true address of executing stack frame */ | |
114 | #define RA_REGNUM 31 /* Contains return address value */ | |
115 | #define FP0_REGNUM 32 /* Floating point register 0 (single float) */ | |
116 | #define PC_REGNUM 64 /* Contains program counter */ | |
117 | #define PS_REGNUM 65 /* Contains processor status */ | |
118 | #define HI_REGNUM 67 /* Multiple/divide temp */ | |
119 | #define LO_REGNUM 68 /* ... */ | |
120 | #define FCRCS_REGNUM 69 /* FP control/status */ | |
121 | #define FCRIR_REGNUM 70 /* FP implementation/revision */ | |
122 | ||
123 | /* Define DO_REGISTERS_INFO() to do machine-specific formatting | |
124 | of register dumps. */ | |
125 | ||
126 | #define DO_REGISTERS_INFO(_regnum, fp) mips_do_registers_info(_regnum, fp) | |
127 | ||
13887249 SG |
128 | /* Total amount of space needed to store our copies of the machine's |
129 | register state, the array `registers'. */ | |
130 | #define REGISTER_BYTES (NUM_REGS*4) | |
131 | ||
132 | /* Index within `registers' of the first byte of the space for | |
133 | register N. */ | |
134 | ||
135 | #define REGISTER_BYTE(N) ((N) * 4) | |
136 | ||
137 | /* Number of bytes of storage in the actual machine representation | |
138 | for register N. On mips, all regs are 4 bytes. */ | |
139 | ||
140 | #define REGISTER_RAW_SIZE(N) 4 | |
141 | ||
142 | /* Number of bytes of storage in the program's representation | |
143 | for register N. On mips, all regs are 4 bytes. */ | |
144 | ||
145 | #define REGISTER_VIRTUAL_SIZE(N) 4 | |
146 | ||
147 | /* Largest value REGISTER_RAW_SIZE can have. */ | |
148 | ||
149 | #define MAX_REGISTER_RAW_SIZE 4 | |
150 | ||
151 | /* Largest value REGISTER_VIRTUAL_SIZE can have. */ | |
152 | ||
153 | #define MAX_REGISTER_VIRTUAL_SIZE 4 | |
154 | ||
155 | /* Nonzero if register N requires conversion | |
156 | from raw format to virtual format. */ | |
157 | ||
158 | #define REGISTER_CONVERTIBLE(N) 0 | |
159 | ||
160 | /* Convert data from raw format for register REGNUM | |
161 | to virtual format for register REGNUM. */ | |
162 | ||
163 | #define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \ | |
164 | bcopy ((FROM), (TO), 4); | |
165 | ||
166 | /* Convert data from virtual format for register REGNUM | |
167 | to raw format for register REGNUM. */ | |
168 | ||
169 | #define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \ | |
170 | bcopy ((FROM), (TO), 4); | |
171 | ||
172 | /* Return the GDB type object for the "standard" data type | |
173 | of data in register N. */ | |
174 | ||
175 | #define REGISTER_VIRTUAL_TYPE(N) builtin_type_int | |
176 | /* Store the address of the place in which to copy the structure the | |
177 | subroutine will return. This is called from call_function. */ | |
178 | ||
179 | #define STORE_STRUCT_RETURN(addr, sp) \ | |
180 | { sp = push_word(sp, addr);} | |
181 | ||
182 | /* Extract from an array REGBUF containing the (raw) register state | |
183 | a function return value of type TYPE, and copy that, in virtual format, | |
184 | into VALBUF. XXX floats */ | |
185 | ||
186 | #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ | |
187 | bcopy (REGBUF+REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 2), VALBUF, TYPE_LENGTH (TYPE)) | |
188 | ||
189 | /* Write into appropriate registers a function return value | |
190 | of type TYPE, given in virtual format. */ | |
191 | ||
192 | #define STORE_RETURN_VALUE(TYPE,VALBUF) \ | |
193 | write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 2), VALBUF, TYPE_LENGTH (TYPE)) | |
194 | ||
195 | /* Extract from an array REGBUF containing the (raw) register state | |
196 | the address in which a function should return its structure value, | |
197 | as a CORE_ADDR (or an expression that can be used as one). */ | |
198 | ||
199 | #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF+16)) | |
200 | ||
201 | /* Structures are returned by ref in extra arg0 */ | |
202 | #define USE_STRUCT_CONVENTION(gcc_p, type) 1 | |
203 | ||
204 | \f | |
205 | /* Describe the pointer in each stack frame to the previous stack frame | |
206 | (its caller). */ | |
207 | ||
208 | /* FRAME_CHAIN takes a frame's nominal address | |
209 | and produces the frame's chain-pointer. | |
210 | ||
211 | FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address | |
212 | and produces the nominal address of the caller frame. | |
213 | ||
214 | However, if FRAME_CHAIN_VALID returns zero, | |
215 | it means the given frame is the outermost one and has no caller. | |
216 | In that case, FRAME_CHAIN_COMBINE is not used. */ | |
217 | ||
218 | #define FRAME_CHAIN(thisframe) (FRAME_ADDR)mips_frame_chain(thisframe) | |
219 | ||
220 | #define FRAME_CHAIN_VALID(chain, thisframe) \ | |
221 | (chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe)))) | |
222 | ||
223 | #define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) | |
224 | ||
225 | /* Define other aspects of the stack frame. */ | |
226 | ||
227 | ||
228 | /* A macro that tells us whether the function invocation represented | |
229 | by FI does not have a frame on the stack associated with it. If it | |
230 | does not, FRAMELESS is set to 1, else 0. */ | |
231 | /* We handle this differently for mips, and maybe we should not */ | |
232 | ||
233 | #define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) {(FRAMELESS) = 0;} | |
234 | ||
235 | /* Saved Pc. */ | |
236 | ||
237 | #define FRAME_SAVED_PC(FRAME) (mips_frame_saved_pc(FRAME)) | |
238 | ||
239 | #define FRAME_ARGS_ADDRESS(fi) (fi)->frame | |
240 | ||
241 | #define FRAME_LOCALS_ADDRESS(fi) (fi)->frame | |
242 | ||
243 | /* Return number of args passed to a frame. | |
244 | Can return -1, meaning no way to tell. */ | |
245 | ||
246 | #define FRAME_NUM_ARGS(num, fi) (num = mips_frame_num_args(fi)) | |
247 | ||
248 | /* Return number of bytes at start of arglist that are not really args. */ | |
249 | ||
250 | #define FRAME_ARGS_SKIP 0 | |
251 | ||
252 | /* Put here the code to store, into a struct frame_saved_regs, | |
253 | the addresses of the saved registers of frame described by FRAME_INFO. | |
254 | This includes special registers such as pc and fp saved in special | |
255 | ways in the stack frame. sp is even more special: | |
256 | the address we return for it IS the sp for the next frame. */ | |
257 | ||
258 | #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) ( \ | |
259 | (frame_saved_regs) = *(frame_info)->saved_regs, \ | |
260 | (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame) | |
261 | ||
262 | \f | |
263 | /* Things needed for making the inferior call functions. */ | |
264 | ||
265 | /* Stack has strict alignment. However, use PUSH_ARGUMENTS | |
266 | to take care of it. */ | |
267 | /*#define STACK_ALIGN(addr) (((addr)+3)&~3)*/ | |
268 | ||
269 | #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ | |
270 | sp = mips_push_arguments(nargs, args, sp, struct_return, struct_addr) | |
271 | ||
272 | /* Push an empty stack frame, to record the current PC, etc. */ | |
273 | ||
274 | #define PUSH_DUMMY_FRAME mips_push_dummy_frame() | |
275 | ||
276 | /* Discard from the stack the innermost frame, restoring all registers. */ | |
277 | ||
278 | #define POP_FRAME mips_pop_frame() | |
279 | ||
280 | #define MK_OP(op,rs,rt,offset) (((op)<<26)|((rs)<<21)|((rt)<<16)|(offset)) | |
281 | #define CALL_DUMMY_SIZE (16*4) | |
282 | #define Dest_Reg 2 | |
283 | #define CALL_DUMMY {\ | |
284 | MK_OP(0,RA_REGNUM,0,8), /* jr $ra # Fake ABOUT_TO_RETURN ...*/\ | |
285 | 0, /* nop # ... to stop raw backtrace*/\ | |
286 | 0x27bd0000, /* addu sp,?0 # Pseudo prologue */\ | |
287 | /* Start here: */\ | |
288 | MK_OP(061,SP_REGNUM,12,0), /* lwc1 $f12,0(sp) # Reload first 4 args*/\ | |
289 | MK_OP(061,SP_REGNUM,13,4), /* lwc1 $f13,4(sp) */\ | |
290 | MK_OP(061,SP_REGNUM,14,8), /* lwc1 $f14,8(sp) */\ | |
291 | MK_OP(061,SP_REGNUM,15,12), /* lwc1 $f15,12(sp) */\ | |
292 | MK_OP(043,SP_REGNUM,4,0), /* lw $r4,0(sp) # Re-load FP regs*/\ | |
293 | MK_OP(043,SP_REGNUM,5,4), /* lw $r5,4(sp) */\ | |
294 | MK_OP(043,SP_REGNUM,6,8), /* lw $r6,8(sp) */\ | |
295 | MK_OP(043,SP_REGNUM,7,12), /* lw $r7,12(sp) */\ | |
296 | (017<<26)| (Dest_Reg << 16), /* lui $r31,<target upper 16 bits>*/\ | |
297 | MK_OP(13,Dest_Reg,Dest_Reg,0), /* ori $r31,$r31,<lower 16 bits>*/ \ | |
298 | (Dest_Reg<<21) | (31<<11) | 9, /* jalr $r31 */\ | |
299 | MK_OP(043,SP_REGNUM,7,12), /* lw $r7,12(sp) */\ | |
300 | 0x5000d, /* bpt */\ | |
301 | } | |
302 | ||
303 | #define CALL_DUMMY_START_OFFSET 12 | |
304 | ||
305 | /* Insert the specified number of args and function address | |
306 | into a call sequence of the above form stored at DUMMYNAME. */ | |
307 | ||
308 | #define FIX_CALL_DUMMY(dummyname, start_sp, fun, nargs, args, rettype, gcc_p)\ | |
309 | (((int*)dummyname)[11] |= (((unsigned long)(fun)) >> 16), \ | |
310 | ((int*)dummyname)[12] |= (unsigned short)(fun)) | |
311 | ||
312 | /* Specific information about a procedure. | |
313 | This overlays the MIPS's PDR records, | |
314 | mipsread.c (ab)uses this to save memory */ | |
315 | ||
316 | typedef struct mips_extra_func_info { | |
317 | unsigned long adr; /* memory address of start of procedure */ | |
318 | long isym; /* pointer to procedure symbol */ | |
319 | long pad2; /* iline: start of line number entries*/ | |
320 | long regmask; /* save register mask */ | |
321 | long regoffset; /* save register offset */ | |
322 | long numargs; /* number of args to procedure (was iopt) */ | |
323 | long fregmask; /* save floating point register mask */ | |
324 | long fregoffset; /* save floating point register offset */ | |
325 | long framesize; /* frameoffset: frame size */ | |
326 | short framereg; /* frame pointer register */ | |
327 | short pcreg; /* offset or reg of return pc */ | |
328 | long lnLow; /* lowest line in the procedure */ | |
329 | long lnHigh; /* highest line in the procedure */ | |
330 | long pad3; /* cbLineOffset: byte offset for this procedure from the fd base */ | |
331 | } *mips_extra_func_info_t; | |
332 | ||
333 | #define EXTRA_FRAME_INFO \ | |
334 | char *proc_desc; /* actually, a mips_extra_func_info_t */\ | |
335 | int num_args;\ | |
336 | struct frame_saved_regs *saved_regs; | |
337 | ||
338 | #define INIT_EXTRA_FRAME_INFO(fci) init_extra_frame_info(fci) |