gdb: recognize new DWARF attributes: defaulted, deleted, calling conv.
[deliverable/binutils-gdb.git] / gdb / v850-tdep.c
CommitLineData
181124bc
CV
1/* Target-dependent code for the NEC V850 for GDB, the GNU debugger.
2
42a4f53d 3 Copyright (C) 1996-2019 Free Software Foundation, Inc.
181124bc
CV
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
a9762ec7 9 the Free Software Foundation; either version 3 of the License, or
181124bc
CV
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
a9762ec7 18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
181124bc
CV
19
20#include "defs.h"
21#include "frame.h"
22#include "frame-base.h"
23#include "trad-frame.h"
24#include "frame-unwind.h"
25#include "dwarf2-frame.h"
26#include "gdbtypes.h"
27#include "inferior.h"
181124bc
CV
28#include "gdbcore.h"
29#include "arch-utils.h"
30#include "regcache.h"
31#include "dis-asm.h"
32#include "osabi.h"
83b2706a
KB
33#include "elf-bfd.h"
34#include "elf/v850.h"
181124bc
CV
35
36enum
37 {
a2d13a0d 38 /* General purpose registers. */
181124bc
CV
39 E_R0_REGNUM,
40 E_R1_REGNUM,
41 E_R2_REGNUM,
42 E_R3_REGNUM, E_SP_REGNUM = E_R3_REGNUM,
43 E_R4_REGNUM,
44 E_R5_REGNUM,
45 E_R6_REGNUM, E_ARG0_REGNUM = E_R6_REGNUM,
46 E_R7_REGNUM,
47 E_R8_REGNUM,
48 E_R9_REGNUM, E_ARGLAST_REGNUM = E_R9_REGNUM,
49 E_R10_REGNUM, E_V0_REGNUM = E_R10_REGNUM,
50 E_R11_REGNUM, E_V1_REGNUM = E_R11_REGNUM,
51 E_R12_REGNUM,
52 E_R13_REGNUM,
53 E_R14_REGNUM,
54 E_R15_REGNUM,
55 E_R16_REGNUM,
56 E_R17_REGNUM,
57 E_R18_REGNUM,
58 E_R19_REGNUM,
59 E_R20_REGNUM,
60 E_R21_REGNUM,
61 E_R22_REGNUM,
62 E_R23_REGNUM,
63 E_R24_REGNUM,
64 E_R25_REGNUM,
65 E_R26_REGNUM,
66 E_R27_REGNUM,
67 E_R28_REGNUM,
68 E_R29_REGNUM, E_FP_REGNUM = E_R29_REGNUM,
69 E_R30_REGNUM, E_EP_REGNUM = E_R30_REGNUM,
70 E_R31_REGNUM, E_LP_REGNUM = E_R31_REGNUM,
a2d13a0d
KB
71
72 /* System registers - main banks. */
181124bc
CV
73 E_R32_REGNUM, E_SR0_REGNUM = E_R32_REGNUM,
74 E_R33_REGNUM,
75 E_R34_REGNUM,
76 E_R35_REGNUM,
77 E_R36_REGNUM,
78 E_R37_REGNUM, E_PS_REGNUM = E_R37_REGNUM,
79 E_R38_REGNUM,
80 E_R39_REGNUM,
81 E_R40_REGNUM,
82 E_R41_REGNUM,
83 E_R42_REGNUM,
84 E_R43_REGNUM,
85 E_R44_REGNUM,
86 E_R45_REGNUM,
87 E_R46_REGNUM,
88 E_R47_REGNUM,
89 E_R48_REGNUM,
90 E_R49_REGNUM,
91 E_R50_REGNUM,
92 E_R51_REGNUM,
93 E_R52_REGNUM, E_CTBP_REGNUM = E_R52_REGNUM,
94 E_R53_REGNUM,
95 E_R54_REGNUM,
96 E_R55_REGNUM,
97 E_R56_REGNUM,
98 E_R57_REGNUM,
99 E_R58_REGNUM,
100 E_R59_REGNUM,
101 E_R60_REGNUM,
102 E_R61_REGNUM,
103 E_R62_REGNUM,
104 E_R63_REGNUM,
a2d13a0d
KB
105
106 /* PC. */
181124bc 107 E_R64_REGNUM, E_PC_REGNUM = E_R64_REGNUM,
55fa75c3
KB
108 E_R65_REGNUM,
109 E_NUM_OF_V850_REGS,
110 E_NUM_OF_V850E_REGS = E_NUM_OF_V850_REGS,
2aaed979 111
a2d13a0d 112 /* System registers - MPV (PROT00) bank. */
55fa75c3 113 E_R66_REGNUM = E_NUM_OF_V850_REGS,
2aaed979
KB
114 E_R67_REGNUM,
115 E_R68_REGNUM,
116 E_R69_REGNUM,
117 E_R70_REGNUM,
118 E_R71_REGNUM,
119 E_R72_REGNUM,
120 E_R73_REGNUM,
121 E_R74_REGNUM,
122 E_R75_REGNUM,
123 E_R76_REGNUM,
124 E_R77_REGNUM,
125 E_R78_REGNUM,
126 E_R79_REGNUM,
127 E_R80_REGNUM,
128 E_R81_REGNUM,
129 E_R82_REGNUM,
130 E_R83_REGNUM,
131 E_R84_REGNUM,
132 E_R85_REGNUM,
133 E_R86_REGNUM,
134 E_R87_REGNUM,
135 E_R88_REGNUM,
136 E_R89_REGNUM,
137 E_R90_REGNUM,
138 E_R91_REGNUM,
139 E_R92_REGNUM,
140 E_R93_REGNUM,
141
a2d13a0d 142 /* System registers - MPU (PROT01) bank. */
2aaed979
KB
143 E_R94_REGNUM,
144 E_R95_REGNUM,
145 E_R96_REGNUM,
146 E_R97_REGNUM,
147 E_R98_REGNUM,
148 E_R99_REGNUM,
149 E_R100_REGNUM,
150 E_R101_REGNUM,
151 E_R102_REGNUM,
152 E_R103_REGNUM,
153 E_R104_REGNUM,
154 E_R105_REGNUM,
155 E_R106_REGNUM,
156 E_R107_REGNUM,
157 E_R108_REGNUM,
158 E_R109_REGNUM,
159 E_R110_REGNUM,
160 E_R111_REGNUM,
161 E_R112_REGNUM,
162 E_R113_REGNUM,
163 E_R114_REGNUM,
164 E_R115_REGNUM,
165 E_R116_REGNUM,
166 E_R117_REGNUM,
167 E_R118_REGNUM,
168 E_R119_REGNUM,
169 E_R120_REGNUM,
170 E_R121_REGNUM,
171
a2d13a0d 172 /* FPU system registers. */
2aaed979
KB
173 E_R122_REGNUM,
174 E_R123_REGNUM,
175 E_R124_REGNUM,
176 E_R125_REGNUM,
177 E_R126_REGNUM,
178 E_R127_REGNUM,
179 E_R128_REGNUM, E_FPSR_REGNUM = E_R128_REGNUM,
180 E_R129_REGNUM, E_FPEPC_REGNUM = E_R129_REGNUM,
181 E_R130_REGNUM, E_FPST_REGNUM = E_R130_REGNUM,
182 E_R131_REGNUM, E_FPCC_REGNUM = E_R131_REGNUM,
183 E_R132_REGNUM, E_FPCFG_REGNUM = E_R132_REGNUM,
184 E_R133_REGNUM,
185 E_R134_REGNUM,
186 E_R135_REGNUM,
187 E_R136_REGNUM,
188 E_R137_REGNUM,
189 E_R138_REGNUM,
190 E_R139_REGNUM,
191 E_R140_REGNUM,
192 E_R141_REGNUM,
193 E_R142_REGNUM,
194 E_R143_REGNUM,
195 E_R144_REGNUM,
196 E_R145_REGNUM,
197 E_R146_REGNUM,
198 E_R147_REGNUM,
199 E_R148_REGNUM,
83b2706a
KB
200 E_R149_REGNUM,
201 E_NUM_OF_V850E2_REGS,
202
203 /* v850e3v5 system registers, selID 1 thru 7. */
204 E_SELID_1_R0_REGNUM = E_NUM_OF_V850E2_REGS,
205 E_SELID_1_R31_REGNUM = E_SELID_1_R0_REGNUM + 31,
206
207 E_SELID_2_R0_REGNUM,
208 E_SELID_2_R31_REGNUM = E_SELID_2_R0_REGNUM + 31,
209
210 E_SELID_3_R0_REGNUM,
211 E_SELID_3_R31_REGNUM = E_SELID_3_R0_REGNUM + 31,
212
213 E_SELID_4_R0_REGNUM,
214 E_SELID_4_R31_REGNUM = E_SELID_4_R0_REGNUM + 31,
215
216 E_SELID_5_R0_REGNUM,
217 E_SELID_5_R31_REGNUM = E_SELID_5_R0_REGNUM + 31,
218
219 E_SELID_6_R0_REGNUM,
220 E_SELID_6_R31_REGNUM = E_SELID_6_R0_REGNUM + 31,
221
222 E_SELID_7_R0_REGNUM,
223 E_SELID_7_R31_REGNUM = E_SELID_7_R0_REGNUM + 31,
224
225 /* v850e3v5 vector registers. */
226 E_VR0_REGNUM,
227 E_VR31_REGNUM = E_VR0_REGNUM + 31,
228
229 E_NUM_OF_V850E3V5_REGS,
230
231 /* Total number of possible registers. */
232 E_NUM_REGS = E_NUM_OF_V850E3V5_REGS
181124bc
CV
233 };
234
235enum
236{
237 v850_reg_size = 4
238};
239
240/* Size of return datatype which fits into all return registers. */
241enum
242{
243 E_MAX_RETTYPE_SIZE_IN_REGS = 2 * v850_reg_size
244};
245
83b2706a
KB
246/* When v850 support was added to GCC in the late nineties, the intention
247 was to follow the Green Hills ABI for v850. In fact, the authors of
248 that support at the time thought that they were doing so. As far as
249 I can tell, the calling conventions are correct, but the return value
250 conventions were not quite right. Over time, the return value code
251 in this file was modified to mostly reflect what GCC was actually
252 doing instead of to actually follow the Green Hills ABI as it did
253 when the code was first written.
254
255 Renesas defined the RH850 ABI which they use in their compiler. It
256 is similar to the original Green Hills ABI with some minor
257 differences. */
258
259enum v850_abi
260{
261 V850_ABI_GCC,
262 V850_ABI_RH850
263};
264
265/* Architecture specific data. */
266
267struct gdbarch_tdep
268{
269 /* Fields from the ELF header. */
270 int e_flags;
271 int e_machine;
272
273 /* Which ABI are we using? */
274 enum v850_abi abi;
275 int eight_byte_align;
276};
277
181124bc
CV
278struct v850_frame_cache
279{
280 /* Base address. */
281 CORE_ADDR base;
282 LONGEST sp_offset;
283 CORE_ADDR pc;
284
285 /* Flag showing that a frame has been created in the prologue code. */
286 int uses_fp;
287
288 /* Saved registers. */
289 struct trad_frame_saved_reg *saved_regs;
290};
291
292/* Info gleaned from scanning a function's prologue. */
293struct pifsr /* Info about one saved register. */
294{
295 int offset; /* Offset from sp or fp. */
296 int cur_frameoffset; /* Current frameoffset. */
297 int reg; /* Saved register number. */
298};
299
300static const char *
d93859e2 301v850_register_name (struct gdbarch *gdbarch, int regnum)
181124bc
CV
302{
303 static const char *v850_reg_names[] =
304 { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
305 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
306 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
307 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
308 "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
309 "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
310 "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23",
311 "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
312 "pc", "fp"
313 };
2aaed979 314 if (regnum < 0 || regnum > E_NUM_OF_V850_REGS)
181124bc
CV
315 return NULL;
316 return v850_reg_names[regnum];
317}
318
319static const char *
d93859e2 320v850e_register_name (struct gdbarch *gdbarch, int regnum)
181124bc
CV
321{
322 static const char *v850e_reg_names[] =
323 {
324 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
325 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
326 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
327 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
328 "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
329 "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
330 "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "sr21", "sr22", "sr23",
331 "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
332 "pc", "fp"
333 };
2aaed979 334 if (regnum < 0 || regnum > E_NUM_OF_V850E_REGS)
181124bc
CV
335 return NULL;
336 return v850e_reg_names[regnum];
337}
338
2aaed979
KB
339static const char *
340v850e2_register_name (struct gdbarch *gdbarch, int regnum)
341{
342 static const char *v850e2_reg_names[] =
343 {
a2d13a0d 344 /* General purpose registers. */
2aaed979
KB
345 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
346 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
347 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
348 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
349
a2d13a0d
KB
350 /* System registers - main banks. */
351 "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "pid", "cfg",
352 "", "", "", "sccfg", "scbp", "eiic", "feic", "dbic",
353 "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "dir", "", "",
354 "", "", "", "", "eiwr", "fewr", "dbwr", "bsel",
355
356
357 /* PC. */
358 "pc", "",
2aaed979 359
a2d13a0d
KB
360 /* System registers - MPV (PROT00) bank. */
361 "vsecr", "vstid", "vsadr", "", "vmecr", "vmtid", "vmadr", "",
362 "vpecr", "vptid", "vpadr", "", "", "", "", "",
363 "", "", "", "", "", "", "", "",
364 "mca", "mcs", "mcc", "mcr",
2aaed979 365
a2d13a0d
KB
366 /* System registers - MPU (PROT01) bank. */
367 "mpm", "mpc", "tid", "", "", "", "ipa0l", "ipa0u",
368 "ipa1l", "ipa1u", "ipa2l", "ipa2u", "ipa3l", "ipa3u", "ipa4l", "ipa4u",
369 "dpa0l", "dpa0u", "dpa1l", "dpa1u", "dpa2l", "dpa2u", "dpa3l", "dpa3u",
370 "dpa4l", "dpa4u", "dpa5l", "dpa5u",
2aaed979 371
a2d13a0d
KB
372 /* FPU system registers. */
373 "", "", "", "", "", "", "fpsr", "fpepc",
374 "fpst", "fpcc", "fpcfg", "fpec", "", "", "", "",
375 "", "", "", "", "", "", "", "",
376 "", "", "", "fpspc"
2aaed979 377 };
83b2706a 378 if (regnum < 0 || regnum >= E_NUM_OF_V850E2_REGS)
2aaed979
KB
379 return NULL;
380 return v850e2_reg_names[regnum];
381}
382
83b2706a
KB
383/* Implement the "register_name" gdbarch method for v850e3v5. */
384
385static const char *
386v850e3v5_register_name (struct gdbarch *gdbarch, int regnum)
387{
388 static const char *v850e3v5_reg_names[] =
389 {
390 /* General purpose registers. */
391 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
392 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
393 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
394 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
395
396 /* selID 0, not including FPU registers. The FPU registers are
397 listed later on. */
398 "eipc", "eipsw", "fepc", "fepsw",
399 "", "psw", "" /* fpsr */, "" /* fpepc */,
400 "" /* fpst */, "" /* fpcc */, "" /* fpcfg */, "" /* fpec */,
401 "sesr", "eiic", "feic", "",
402 "ctpc", "ctpsw", "", "", "ctbp", "", "", "",
403 "", "", "", "", "eiwr", "fewr", "", "bsel",
404
405
406 /* PC. */
407 "pc", "",
408
409 /* v850e2 MPV bank. */
410 "", "", "", "", "", "", "", "",
411 "", "", "", "", "", "", "", "",
412 "", "", "", "", "", "", "", "",
413 "", "", "", "",
414
415 /* Skip v850e2 MPU bank. It's tempting to reuse these, but we need
416 32 entries for this bank. */
417 "", "", "", "", "", "", "", "",
418 "", "", "", "", "", "", "", "",
419 "", "", "", "", "", "", "", "",
420 "", "", "", "",
421
422 /* FPU system registers. These are actually in selID 0, but
423 are placed here to preserve register numbering compatibility
424 with previous architectures. */
425 "", "", "", "", "", "", "fpsr", "fpepc",
426 "fpst", "fpcc", "fpcfg", "fpec", "", "", "", "",
427 "", "", "", "", "", "", "", "",
428 "", "", "", "",
429
430 /* selID 1. */
431 "mcfg0", "mcfg1", "rbase", "ebase", "intbp", "mctl", "pid", "fpipr",
432 "", "", "tcsel", "sccfg", "scbp", "hvccfg", "hvcbp", "vsel",
433 "vmprt0", "vmprt1", "vmprt2", "", "", "", "", "vmscctl",
434 "vmsctbl0", "vmsctbl1", "vmsctbl2", "vmsctbl3", "", "", "", "",
435
436 /* selID 2. */
437 "htcfg0", "", "", "", "", "htctl", "mea", "asid",
438 "mei", "ispr", "pmr", "icsr", "intcfg", "", "", "",
439 "tlbsch", "", "", "", "", "", "", "htscctl",
440 "htsctbl0", "htsctbl1", "htsctbl2", "htsctbl3",
441 "htsctbl4", "htsctbl5", "htsctbl6", "htsctbl7",
442
443 /* selID 3. */
444 "", "", "", "", "", "", "", "",
445 "", "", "", "", "", "", "", "",
446 "", "", "", "", "", "", "", "",
447 "", "", "", "", "", "", "", "",
448
449 /* selID 4. */
450 "tlbidx", "", "", "", "telo0", "telo1", "tehi0", "tehi1",
451 "", "", "tlbcfg", "", "bwerrl", "bwerrh", "brerrl", "brerrh",
452 "ictagl", "ictagh", "icdatl", "icdath",
453 "dctagl", "dctagh", "dcdatl", "dcdath",
454 "icctrl", "dcctrl", "iccfg", "dccfg", "icerr", "dcerr", "", "",
455
456 /* selID 5. */
457 "mpm", "mprc", "", "", "mpbrgn", "mptrgn", "", "",
458 "mca", "mcs", "mcc", "mcr", "", "", "", "",
459 "", "", "", "", "mpprt0", "mpprt1", "mpprt2", "",
460 "", "", "", "", "", "", "", "",
461
462 /* selID 6. */
463 "mpla0", "mpua0", "mpat0", "", "mpla1", "mpua1", "mpat1", "",
464 "mpla2", "mpua2", "mpat2", "", "mpla3", "mpua3", "mpat3", "",
465 "mpla4", "mpua4", "mpat4", "", "mpla5", "mpua5", "mpat5", "",
466 "mpla6", "mpua6", "mpat6", "", "mpla7", "mpua7", "mpat7", "",
467
468 /* selID 7. */
469 "mpla8", "mpua8", "mpat8", "", "mpla9", "mpua9", "mpat9", "",
470 "mpla10", "mpua10", "mpat10", "", "mpla11", "mpua11", "mpat11", "",
471 "mpla12", "mpua12", "mpat12", "", "mpla13", "mpua13", "mpat13", "",
472 "mpla14", "mpua14", "mpat14", "", "mpla15", "mpua15", "mpat15", "",
473
474 /* Vector Registers */
475 "vr0", "vr1", "vr2", "vr3", "vr4", "vr5", "vr6", "vr7",
476 "vr8", "vr9", "vr10", "vr11", "vr12", "vr13", "vr14", "vr15",
477 "vr16", "vr17", "vr18", "vr19", "vr20", "vr21", "vr22", "vr23",
478 "vr24", "vr25", "vr26", "vr27", "vr28", "vr29", "vr30", "vr31",
479 };
480
481 if (regnum < 0 || regnum >= E_NUM_OF_V850E3V5_REGS)
482 return NULL;
483 return v850e3v5_reg_names[regnum];
484}
485
181124bc
CV
486/* Returns the default type for register N. */
487
488static struct type *
489v850_register_type (struct gdbarch *gdbarch, int regnum)
490{
491 if (regnum == E_PC_REGNUM)
0dfff4cb 492 return builtin_type (gdbarch)->builtin_func_ptr;
83b2706a
KB
493 else if (E_VR0_REGNUM <= regnum && regnum <= E_VR31_REGNUM)
494 return builtin_type (gdbarch)->builtin_uint64;
df4df182 495 return builtin_type (gdbarch)->builtin_int32;
181124bc
CV
496}
497
498static int
499v850_type_is_scalar (struct type *t)
500{
501 return (TYPE_CODE (t) != TYPE_CODE_STRUCT
502 && TYPE_CODE (t) != TYPE_CODE_UNION
503 && TYPE_CODE (t) != TYPE_CODE_ARRAY);
504}
505
506/* Should call_function allocate stack space for a struct return? */
83b2706a 507
181124bc 508static int
83b2706a 509v850_use_struct_convention (struct gdbarch *gdbarch, struct type *type)
181124bc
CV
510{
511 int i;
512 struct type *fld_type, *tgt_type;
513
83b2706a
KB
514 if (gdbarch_tdep (gdbarch)->abi == V850_ABI_RH850)
515 {
516 if (v850_type_is_scalar (type) && TYPE_LENGTH(type) <= 8)
517 return 0;
518
519 /* Structs are never returned in registers for this ABI. */
520 return 1;
521 }
181124bc
CV
522 /* 1. The value is greater than 8 bytes -> returned by copying. */
523 if (TYPE_LENGTH (type) > 8)
524 return 1;
525
526 /* 2. The value is a single basic type -> returned in register. */
527 if (v850_type_is_scalar (type))
528 return 0;
529
530 /* The value is a structure or union with a single element and that
531 element is either a single basic type or an array of a single basic
532 type whose size is greater than or equal to 4 -> returned in register. */
533 if ((TYPE_CODE (type) == TYPE_CODE_STRUCT
534 || TYPE_CODE (type) == TYPE_CODE_UNION)
535 && TYPE_NFIELDS (type) == 1)
536 {
537 fld_type = TYPE_FIELD_TYPE (type, 0);
538 if (v850_type_is_scalar (fld_type) && TYPE_LENGTH (fld_type) >= 4)
539 return 0;
540
541 if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
542 {
543 tgt_type = TYPE_TARGET_TYPE (fld_type);
544 if (v850_type_is_scalar (tgt_type) && TYPE_LENGTH (tgt_type) >= 4)
545 return 0;
546 }
547 }
548
549 /* The value is a structure whose first element is an integer or a float,
550 and which contains no arrays of more than two elements -> returned in
551 register. */
552 if (TYPE_CODE (type) == TYPE_CODE_STRUCT
553 && v850_type_is_scalar (TYPE_FIELD_TYPE (type, 0))
554 && TYPE_LENGTH (TYPE_FIELD_TYPE (type, 0)) == 4)
555 {
556 for (i = 1; i < TYPE_NFIELDS (type); ++i)
557 {
558 fld_type = TYPE_FIELD_TYPE (type, 0);
559 if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
560 {
561 tgt_type = TYPE_TARGET_TYPE (fld_type);
4bf5402d 562 if (TYPE_LENGTH (tgt_type) > 0
181124bc
CV
563 && TYPE_LENGTH (fld_type) / TYPE_LENGTH (tgt_type) > 2)
564 return 1;
565 }
566 }
567 return 0;
568 }
569
581e13c1
MS
570 /* The value is a union which contains at least one field which
571 would be returned in registers according to these rules ->
572 returned in register. */
181124bc
CV
573 if (TYPE_CODE (type) == TYPE_CODE_UNION)
574 {
575 for (i = 0; i < TYPE_NFIELDS (type); ++i)
576 {
577 fld_type = TYPE_FIELD_TYPE (type, 0);
83b2706a 578 if (!v850_use_struct_convention (gdbarch, fld_type))
181124bc
CV
579 return 0;
580 }
581 }
582
583 return 1;
584}
585
586/* Structure for mapping bits in register lists to register numbers. */
83b2706a 587
181124bc
CV
588struct reg_list
589{
590 long mask;
591 int regno;
592};
593
594/* Helper function for v850_scan_prologue to handle prepare instruction. */
595
596static void
597v850_handle_prepare (int insn, int insn2, CORE_ADDR * current_pc_ptr,
598 struct v850_frame_cache *pi, struct pifsr **pifsr_ptr)
599{
600 CORE_ADDR current_pc = *current_pc_ptr;
601 struct pifsr *pifsr = *pifsr_ptr;
602 long next = insn2 & 0xffff;
603 long list12 = ((insn & 1) << 16) + (next & 0xffe0);
604 long offset = (insn & 0x3e) << 1;
605 static struct reg_list reg_table[] =
606 {
607 {0x00800, 20}, /* r20 */
608 {0x00400, 21}, /* r21 */
609 {0x00200, 22}, /* r22 */
610 {0x00100, 23}, /* r23 */
611 {0x08000, 24}, /* r24 */
612 {0x04000, 25}, /* r25 */
613 {0x02000, 26}, /* r26 */
614 {0x01000, 27}, /* r27 */
615 {0x00080, 28}, /* r28 */
616 {0x00040, 29}, /* r29 */
617 {0x10000, 30}, /* ep */
618 {0x00020, 31}, /* lp */
619 {0, 0} /* end of table */
620 };
621 int i;
622
623 if ((next & 0x1f) == 0x0b) /* skip imm16 argument */
624 current_pc += 2;
625 else if ((next & 0x1f) == 0x13) /* skip imm16 argument */
626 current_pc += 2;
627 else if ((next & 0x1f) == 0x1b) /* skip imm32 argument */
628 current_pc += 4;
629
630 /* Calculate the total size of the saved registers, and add it to the
631 immediate value used to adjust SP. */
632 for (i = 0; reg_table[i].mask != 0; i++)
633 if (list12 & reg_table[i].mask)
634 offset += v850_reg_size;
635 pi->sp_offset -= offset;
636
637 /* Calculate the offsets of the registers relative to the value the SP
638 will have after the registers have been pushed and the imm5 value has
639 been subtracted from it. */
640 if (pifsr)
641 {
642 for (i = 0; reg_table[i].mask != 0; i++)
643 {
644 if (list12 & reg_table[i].mask)
645 {
646 int reg = reg_table[i].regno;
647 offset -= v850_reg_size;
648 pifsr->reg = reg;
649 pifsr->offset = offset;
650 pifsr->cur_frameoffset = pi->sp_offset;
651 pifsr++;
652 }
653 }
654 }
655
656 /* Set result parameters. */
657 *current_pc_ptr = current_pc;
658 *pifsr_ptr = pifsr;
659}
660
661
662/* Helper function for v850_scan_prologue to handle pushm/pushl instructions.
663 The SR bit of the register list is not supported. gcc does not generate
664 this bit. */
665
666static void
667v850_handle_pushm (int insn, int insn2, struct v850_frame_cache *pi,
668 struct pifsr **pifsr_ptr)
669{
670 struct pifsr *pifsr = *pifsr_ptr;
671 long list12 = ((insn & 0x0f) << 16) + (insn2 & 0xfff0);
672 long offset = 0;
673 static struct reg_list pushml_reg_table[] =
674 {
675 {0x80000, E_PS_REGNUM}, /* PSW */
676 {0x40000, 1}, /* r1 */
677 {0x20000, 2}, /* r2 */
678 {0x10000, 3}, /* r3 */
679 {0x00800, 4}, /* r4 */
680 {0x00400, 5}, /* r5 */
681 {0x00200, 6}, /* r6 */
682 {0x00100, 7}, /* r7 */
683 {0x08000, 8}, /* r8 */
684 {0x04000, 9}, /* r9 */
685 {0x02000, 10}, /* r10 */
686 {0x01000, 11}, /* r11 */
687 {0x00080, 12}, /* r12 */
688 {0x00040, 13}, /* r13 */
689 {0x00020, 14}, /* r14 */
690 {0x00010, 15}, /* r15 */
691 {0, 0} /* end of table */
692 };
693 static struct reg_list pushmh_reg_table[] =
694 {
695 {0x80000, 16}, /* r16 */
696 {0x40000, 17}, /* r17 */
697 {0x20000, 18}, /* r18 */
698 {0x10000, 19}, /* r19 */
699 {0x00800, 20}, /* r20 */
700 {0x00400, 21}, /* r21 */
701 {0x00200, 22}, /* r22 */
702 {0x00100, 23}, /* r23 */
703 {0x08000, 24}, /* r24 */
704 {0x04000, 25}, /* r25 */
705 {0x02000, 26}, /* r26 */
706 {0x01000, 27}, /* r27 */
707 {0x00080, 28}, /* r28 */
708 {0x00040, 29}, /* r29 */
709 {0x00010, 30}, /* r30 */
710 {0x00020, 31}, /* r31 */
711 {0, 0} /* end of table */
712 };
713 struct reg_list *reg_table;
714 int i;
715
716 /* Is this a pushml or a pushmh? */
717 if ((insn2 & 7) == 1)
718 reg_table = pushml_reg_table;
719 else
720 reg_table = pushmh_reg_table;
721
7a9dd1b2 722 /* Calculate the total size of the saved registers, and add it to the
181124bc
CV
723 immediate value used to adjust SP. */
724 for (i = 0; reg_table[i].mask != 0; i++)
725 if (list12 & reg_table[i].mask)
726 offset += v850_reg_size;
727 pi->sp_offset -= offset;
728
729 /* Calculate the offsets of the registers relative to the value the SP
730 will have after the registers have been pushed and the imm5 value is
731 subtracted from it. */
732 if (pifsr)
733 {
734 for (i = 0; reg_table[i].mask != 0; i++)
735 {
736 if (list12 & reg_table[i].mask)
737 {
738 int reg = reg_table[i].regno;
739 offset -= v850_reg_size;
740 pifsr->reg = reg;
741 pifsr->offset = offset;
742 pifsr->cur_frameoffset = pi->sp_offset;
743 pifsr++;
744 }
745 }
746 }
747
748 /* Set result parameters. */
749 *pifsr_ptr = pifsr;
750}
751
752/* Helper function to evaluate if register is one of the "save" registers.
753 This allows to simplify conditionals in v850_analyze_prologue a lot. */
754
755static int
756v850_is_save_register (int reg)
757{
758 /* The caller-save registers are R2, R20 - R29 and R31. All other
759 registers are either special purpose (PC, SP), argument registers,
581e13c1 760 or just considered free for use in the caller. */
181124bc
CV
761 return reg == E_R2_REGNUM
762 || (reg >= E_R20_REGNUM && reg <= E_R29_REGNUM)
763 || reg == E_R31_REGNUM;
764}
765
766/* Scan the prologue of the function that contains PC, and record what
767 we find in PI. Returns the pc after the prologue. Note that the
768 addresses saved in frame->saved_regs are just frame relative (negative
769 offsets from the frame pointer). This is because we don't know the
770 actual value of the frame pointer yet. In some circumstances, the
771 frame pointer can't be determined till after we have scanned the
772 prologue. */
773
774static CORE_ADDR
e17a4113
UW
775v850_analyze_prologue (struct gdbarch *gdbarch,
776 CORE_ADDR func_addr, CORE_ADDR pc,
d2ca4222 777 struct v850_frame_cache *pi, ULONGEST ctbp)
181124bc 778{
e17a4113 779 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
181124bc
CV
780 CORE_ADDR prologue_end, current_pc;
781 struct pifsr pifsrs[E_NUM_REGS + 1];
782 struct pifsr *pifsr, *pifsr_tmp;
181124bc
CV
783 int ep_used;
784 int reg;
785 CORE_ADDR save_pc, save_end;
786 int regsave_func_p;
787 int r12_tmp;
788
789 memset (&pifsrs, 0, sizeof pifsrs);
790 pifsr = &pifsrs[0];
791
792 prologue_end = pc;
793
794 /* Now, search the prologue looking for instructions that setup fp, save
795 rp, adjust sp and such. We also record the frame offset of any saved
796 registers. */
797
798 pi->sp_offset = 0;
799 pi->uses_fp = 0;
800 ep_used = 0;
801 regsave_func_p = 0;
802 save_pc = 0;
803 save_end = 0;
804 r12_tmp = 0;
805
806 for (current_pc = func_addr; current_pc < prologue_end;)
807 {
808 int insn;
809 int insn2 = -1; /* dummy value */
810
e17a4113 811 insn = read_memory_integer (current_pc, 2, byte_order);
181124bc 812 current_pc += 2;
581e13c1 813 if ((insn & 0x0780) >= 0x0600) /* Four byte instruction? */
181124bc 814 {
e17a4113 815 insn2 = read_memory_integer (current_pc, 2, byte_order);
181124bc
CV
816 current_pc += 2;
817 }
818
819 if ((insn & 0xffc0) == ((10 << 11) | 0x0780) && !regsave_func_p)
820 { /* jarl <func>,10 */
821 long low_disp = insn2 & ~(long) 1;
822 long disp = (((((insn & 0x3f) << 16) + low_disp)
823 & ~(long) 1) ^ 0x00200000) - 0x00200000;
824
825 save_pc = current_pc;
826 save_end = prologue_end;
827 regsave_func_p = 1;
828 current_pc += disp - 4;
829 prologue_end = (current_pc
830 + (2 * 3) /* moves to/from ep */
831 + 4 /* addi <const>,sp,sp */
832 + 2 /* jmp [r10] */
833 + (2 * 12) /* sst.w to save r2, r20-r29, r31 */
834 + 20); /* slop area */
835 }
836 else if ((insn & 0xffc0) == 0x0200 && !regsave_func_p)
837 { /* callt <imm6> */
181124bc
CV
838 long adr = ctbp + ((insn & 0x3f) << 1);
839
840 save_pc = current_pc;
841 save_end = prologue_end;
842 regsave_func_p = 1;
e17a4113
UW
843 current_pc = ctbp + (read_memory_unsigned_integer (adr, 2, byte_order)
844 & 0xffff);
181124bc
CV
845 prologue_end = (current_pc
846 + (2 * 3) /* prepare list2,imm5,sp/imm */
847 + 4 /* ctret */
848 + 20); /* slop area */
849 continue;
850 }
851 else if ((insn & 0xffc0) == 0x0780) /* prepare list2,imm5 */
852 {
853 v850_handle_prepare (insn, insn2, &current_pc, pi, &pifsr);
854 continue;
855 }
856 else if (insn == 0x07e0 && regsave_func_p && insn2 == 0x0144)
857 { /* ctret after processing register save. */
858 current_pc = save_pc;
859 prologue_end = save_end;
860 regsave_func_p = 0;
861 continue;
862 }
863 else if ((insn & 0xfff0) == 0x07e0 && (insn2 & 5) == 1)
864 { /* pushml, pushmh */
865 v850_handle_pushm (insn, insn2, pi, &pifsr);
866 continue;
867 }
868 else if ((insn & 0xffe0) == 0x0060 && regsave_func_p)
869 { /* jmp after processing register save. */
870 current_pc = save_pc;
871 prologue_end = save_end;
872 regsave_func_p = 0;
873 continue;
874 }
875 else if ((insn & 0x07c0) == 0x0780 /* jarl or jr */
876 || (insn & 0xffe0) == 0x0060 /* jmp */
877 || (insn & 0x0780) == 0x0580) /* branch */
878 {
581e13c1 879 break; /* Ran into end of prologue. */
181124bc
CV
880 }
881
882 else if ((insn & 0xffe0) == ((E_SP_REGNUM << 11) | 0x0240))
883 /* add <imm>,sp */
884 pi->sp_offset += ((insn & 0x1f) ^ 0x10) - 0x10;
885 else if (insn == ((E_SP_REGNUM << 11) | 0x0600 | E_SP_REGNUM))
886 /* addi <imm>,sp,sp */
887 pi->sp_offset += insn2;
888 else if (insn == ((E_FP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
889 /* mov sp,fp */
890 pi->uses_fp = 1;
891 else if (insn == ((E_R12_REGNUM << 11) | 0x0640 | E_R0_REGNUM))
892 /* movhi hi(const),r0,r12 */
893 r12_tmp = insn2 << 16;
894 else if (insn == ((E_R12_REGNUM << 11) | 0x0620 | E_R12_REGNUM))
895 /* movea lo(const),r12,r12 */
896 r12_tmp += insn2;
897 else if (insn == ((E_SP_REGNUM << 11) | 0x01c0 | E_R12_REGNUM) && r12_tmp)
898 /* add r12,sp */
899 pi->sp_offset += r12_tmp;
900 else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
901 /* mov sp,ep */
902 ep_used = 1;
903 else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_R1_REGNUM))
904 /* mov r1,ep */
905 ep_used = 0;
906 else if (((insn & 0x07ff) == (0x0760 | E_SP_REGNUM)
907 || (pi->uses_fp
908 && (insn & 0x07ff) == (0x0760 | E_FP_REGNUM)))
909 && pifsr
910 && v850_is_save_register (reg = (insn >> 11) & 0x1f))
911 {
912 /* st.w <reg>,<offset>[sp] or st.w <reg>,<offset>[fp] */
913 pifsr->reg = reg;
914 pifsr->offset = insn2 & ~1;
915 pifsr->cur_frameoffset = pi->sp_offset;
916 pifsr++;
917 }
918 else if (ep_used
919 && ((insn & 0x0781) == 0x0501)
920 && pifsr
921 && v850_is_save_register (reg = (insn >> 11) & 0x1f))
922 {
923 /* sst.w <reg>,<offset>[ep] */
924 pifsr->reg = reg;
925 pifsr->offset = (insn & 0x007e) << 1;
926 pifsr->cur_frameoffset = pi->sp_offset;
927 pifsr++;
928 }
929 }
930
931 /* Fix up any offsets to the final offset. If a frame pointer was created,
932 use it instead of the stack pointer. */
933 for (pifsr_tmp = pifsrs; pifsr_tmp != pifsr; pifsr_tmp++)
934 {
935 pifsr_tmp->offset -= pi->sp_offset - pifsr_tmp->cur_frameoffset;
936 pi->saved_regs[pifsr_tmp->reg].addr = pifsr_tmp->offset;
937 }
938
939 return current_pc;
940}
941
942/* Return the address of the first code past the prologue of the function. */
943
944static CORE_ADDR
6093d2eb 945v850_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
181124bc
CV
946{
947 CORE_ADDR func_addr, func_end;
948
581e13c1 949 /* See what the symbol table says. */
181124bc
CV
950
951 if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
952 {
953 struct symtab_and_line sal;
954
955 sal = find_pc_line (func_addr, 0);
956 if (sal.line != 0 && sal.end < func_end)
957 return sal.end;
958
959 /* Either there's no line info, or the line after the prologue is after
960 the end of the function. In this case, there probably isn't a
961 prologue. */
962 return pc;
963 }
964
581e13c1
MS
965 /* We can't find the start of this function, so there's nothing we
966 can do. */
181124bc
CV
967 return pc;
968}
969
83b2706a
KB
970/* Return 1 if the data structure has any 8-byte fields that'll require
971 the entire data structure to be aligned. Otherwise, return 0. */
972
973static int
974v850_eight_byte_align_p (struct type *type)
975{
976 type = check_typedef (type);
977
978 if (v850_type_is_scalar (type))
979 return (TYPE_LENGTH (type) == 8);
980 else
981 {
982 int i;
983
984 for (i = 0; i < TYPE_NFIELDS (type); i++)
985 {
986 if (v850_eight_byte_align_p (TYPE_FIELD_TYPE (type, i)))
987 return 1;
988 }
989 }
990 return 0;
991}
992
181124bc
CV
993static CORE_ADDR
994v850_frame_align (struct gdbarch *ignore, CORE_ADDR sp)
995{
996 return sp & ~3;
997}
998
999/* Setup arguments and LP for a call to the target. First four args
1000 go in R6->R9, subsequent args go into sp + 16 -> sp + ... Structs
1001 are passed by reference. 64 bit quantities (doubles and long longs)
1002 may be split between the regs and the stack. When calling a function
1003 that returns a struct, a pointer to the struct is passed in as a secret
1004 first argument (always in R6).
1005
1006 Stack space for the args has NOT been allocated: that job is up to us. */
1007
1008static CORE_ADDR
1009v850_push_dummy_call (struct gdbarch *gdbarch,
1010 struct value *function,
1011 struct regcache *regcache,
1012 CORE_ADDR bp_addr,
1013 int nargs,
1014 struct value **args,
1015 CORE_ADDR sp,
cf84fa6b 1016 function_call_return_method return_method,
181124bc
CV
1017 CORE_ADDR struct_addr)
1018{
e17a4113 1019 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
181124bc
CV
1020 int argreg;
1021 int argnum;
b926417a 1022 int arg_space = 0;
181124bc
CV
1023 int stack_offset;
1024
83b2706a
KB
1025 if (gdbarch_tdep (gdbarch)->abi == V850_ABI_RH850)
1026 stack_offset = 0;
1027 else
181124bc
CV
1028 /* The offset onto the stack at which we will start copying parameters
1029 (after the registers are used up) begins at 16 rather than at zero.
1030 That's how the ABI is defined, though there's no indication that these
1031 16 bytes are used for anything, not even for saving incoming
1032 argument registers. */
1033 stack_offset = 16;
1034
1035 /* Now make space on the stack for the args. */
1036 for (argnum = 0; argnum < nargs; argnum++)
b926417a
TT
1037 arg_space += ((TYPE_LENGTH (value_type (args[argnum])) + 3) & ~3);
1038 sp -= arg_space + stack_offset;
181124bc
CV
1039
1040 argreg = E_ARG0_REGNUM;
1041 /* The struct_return pointer occupies the first parameter register. */
cf84fa6b 1042 if (return_method == return_method_struct)
181124bc
CV
1043 regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
1044
1045 /* Now load as many as possible of the first arguments into
1046 registers, and push the rest onto the stack. There are 16 bytes
1047 in four registers available. Loop thru args from first to last. */
1048 for (argnum = 0; argnum < nargs; argnum++)
1049 {
1050 int len;
1051 gdb_byte *val;
1052 gdb_byte valbuf[v850_reg_size];
1053
1054 if (!v850_type_is_scalar (value_type (*args))
83b2706a 1055 && gdbarch_tdep (gdbarch)->abi == V850_ABI_GCC
181124bc
CV
1056 && TYPE_LENGTH (value_type (*args)) > E_MAX_RETTYPE_SIZE_IN_REGS)
1057 {
e17a4113
UW
1058 store_unsigned_integer (valbuf, 4, byte_order,
1059 value_address (*args));
181124bc
CV
1060 len = 4;
1061 val = valbuf;
1062 }
1063 else
1064 {
1065 len = TYPE_LENGTH (value_type (*args));
1066 val = (gdb_byte *) value_contents (*args);
1067 }
1068
83b2706a
KB
1069 if (gdbarch_tdep (gdbarch)->eight_byte_align
1070 && v850_eight_byte_align_p (value_type (*args)))
1071 {
1072 if (argreg <= E_ARGLAST_REGNUM && (argreg & 1))
1073 argreg++;
1074 else if (stack_offset & 0x4)
1075 stack_offset += 4;
1076 }
1077
181124bc
CV
1078 while (len > 0)
1079 if (argreg <= E_ARGLAST_REGNUM)
1080 {
1081 CORE_ADDR regval;
1082
e17a4113 1083 regval = extract_unsigned_integer (val, v850_reg_size, byte_order);
181124bc
CV
1084 regcache_cooked_write_unsigned (regcache, argreg, regval);
1085
1086 len -= v850_reg_size;
1087 val += v850_reg_size;
1088 argreg++;
1089 }
1090 else
1091 {
1092 write_memory (sp + stack_offset, val, 4);
1093
1094 len -= 4;
1095 val += 4;
1096 stack_offset += 4;
1097 }
1098 args++;
1099 }
1100
1101 /* Store return address. */
1102 regcache_cooked_write_unsigned (regcache, E_LP_REGNUM, bp_addr);
1103
1104 /* Update stack pointer. */
1105 regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
1106
1107 return sp;
1108}
1109
1110static void
1111v850_extract_return_value (struct type *type, struct regcache *regcache,
1112 gdb_byte *valbuf)
1113{
ac7936df 1114 struct gdbarch *gdbarch = regcache->arch ();
e17a4113 1115 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
181124bc
CV
1116 int len = TYPE_LENGTH (type);
1117
1118 if (len <= v850_reg_size)
1119 {
1120 ULONGEST val;
1121
1122 regcache_cooked_read_unsigned (regcache, E_V0_REGNUM, &val);
e17a4113 1123 store_unsigned_integer (valbuf, len, byte_order, val);
181124bc
CV
1124 }
1125 else if (len <= 2 * v850_reg_size)
1126 {
1127 int i, regnum = E_V0_REGNUM;
1128 gdb_byte buf[v850_reg_size];
1129 for (i = 0; len > 0; i += 4, len -= 4)
1130 {
0b883586 1131 regcache->raw_read (regnum++, buf);
181124bc
CV
1132 memcpy (valbuf + i, buf, len > 4 ? 4 : len);
1133 }
1134 }
1135}
1136
1137static void
1138v850_store_return_value (struct type *type, struct regcache *regcache,
1139 const gdb_byte *valbuf)
1140{
ac7936df 1141 struct gdbarch *gdbarch = regcache->arch ();
e17a4113 1142 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
181124bc
CV
1143 int len = TYPE_LENGTH (type);
1144
1145 if (len <= v850_reg_size)
e17a4113
UW
1146 regcache_cooked_write_unsigned
1147 (regcache, E_V0_REGNUM,
1148 extract_unsigned_integer (valbuf, len, byte_order));
181124bc
CV
1149 else if (len <= 2 * v850_reg_size)
1150 {
1151 int i, regnum = E_V0_REGNUM;
1152 for (i = 0; i < len; i += 4)
10eaee5f 1153 regcache->raw_write (regnum++, valbuf + i);
181124bc
CV
1154 }
1155}
1156
1157static enum return_value_convention
6a3a010b 1158v850_return_value (struct gdbarch *gdbarch, struct value *function,
c055b101 1159 struct type *type, struct regcache *regcache,
181124bc
CV
1160 gdb_byte *readbuf, const gdb_byte *writebuf)
1161{
83b2706a 1162 if (v850_use_struct_convention (gdbarch, type))
181124bc
CV
1163 return RETURN_VALUE_STRUCT_CONVENTION;
1164 if (writebuf)
1165 v850_store_return_value (type, regcache, writebuf);
1166 else if (readbuf)
1167 v850_extract_return_value (type, regcache, readbuf);
1168 return RETURN_VALUE_REGISTER_CONVENTION;
1169}
1170
cd6c3b4f
YQ
1171/* Implement the breakpoint_kind_from_pc gdbarch method. */
1172
d19280ad
YQ
1173static int
1174v850_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
181124bc 1175{
d19280ad
YQ
1176 return 2;
1177}
83b2706a 1178
cd6c3b4f
YQ
1179/* Implement the sw_breakpoint_from_kind gdbarch method. */
1180
d19280ad
YQ
1181static const gdb_byte *
1182v850_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
1183{
1184 *size = kind;
1185
1186 switch (gdbarch_bfd_arch_info (gdbarch)->mach)
ff12a659
YQ
1187 {
1188 case bfd_mach_v850e2:
1189 case bfd_mach_v850e2v3:
1190 case bfd_mach_v850e3v5:
1191 {
1192 /* Implement software breakpoints by using the dbtrap instruction.
1193 Older architectures had no such instruction. For those, an
1194 unconditional branch to self instruction is used. */
83b2706a 1195
ff12a659 1196 static unsigned char dbtrap_breakpoint[] = { 0x40, 0xf8 };
83b2706a 1197
ff12a659
YQ
1198 return dbtrap_breakpoint;
1199 }
1200 break;
1201 default:
1202 {
1203 static unsigned char breakpoint[] = { 0x85, 0x05 };
83b2706a 1204
ff12a659
YQ
1205 return breakpoint;
1206 }
1207 break;
1208 }
181124bc
CV
1209}
1210
1211static struct v850_frame_cache *
94afd7a6 1212v850_alloc_frame_cache (struct frame_info *this_frame)
181124bc
CV
1213{
1214 struct v850_frame_cache *cache;
181124bc
CV
1215
1216 cache = FRAME_OBSTACK_ZALLOC (struct v850_frame_cache);
94afd7a6 1217 cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
181124bc
CV
1218
1219 /* Base address. */
1220 cache->base = 0;
1221 cache->sp_offset = 0;
1222 cache->pc = 0;
1223
1224 /* Frameless until proven otherwise. */
1225 cache->uses_fp = 0;
1226
1227 return cache;
1228}
1229
1230static struct v850_frame_cache *
94afd7a6 1231v850_frame_cache (struct frame_info *this_frame, void **this_cache)
181124bc 1232{
e17a4113 1233 struct gdbarch *gdbarch = get_frame_arch (this_frame);
181124bc
CV
1234 struct v850_frame_cache *cache;
1235 CORE_ADDR current_pc;
1236 int i;
1237
1238 if (*this_cache)
19ba03f4 1239 return (struct v850_frame_cache *) *this_cache;
181124bc 1240
94afd7a6 1241 cache = v850_alloc_frame_cache (this_frame);
181124bc
CV
1242 *this_cache = cache;
1243
1244 /* In principle, for normal frames, fp holds the frame pointer,
1245 which holds the base address for the current stack frame.
1246 However, for functions that don't need it, the frame pointer is
1247 optional. For these "frameless" functions the frame pointer is
1248 actually the frame pointer of the calling frame. */
94afd7a6 1249 cache->base = get_frame_register_unsigned (this_frame, E_FP_REGNUM);
181124bc
CV
1250 if (cache->base == 0)
1251 return cache;
1252
94afd7a6
UW
1253 cache->pc = get_frame_func (this_frame);
1254 current_pc = get_frame_pc (this_frame);
181124bc 1255 if (cache->pc != 0)
d2ca4222
UW
1256 {
1257 ULONGEST ctbp;
94afd7a6 1258 ctbp = get_frame_register_unsigned (this_frame, E_CTBP_REGNUM);
e17a4113 1259 v850_analyze_prologue (gdbarch, cache->pc, current_pc, cache, ctbp);
d2ca4222 1260 }
181124bc
CV
1261
1262 if (!cache->uses_fp)
1263 {
1264 /* We didn't find a valid frame, which means that CACHE->base
1265 currently holds the frame pointer for our calling frame. If
1266 we're at the start of a function, or somewhere half-way its
1267 prologue, the function's frame probably hasn't been fully
1268 setup yet. Try to reconstruct the base address for the stack
1269 frame by looking at the stack pointer. For truly "frameless"
1270 functions this might work too. */
94afd7a6 1271 cache->base = get_frame_register_unsigned (this_frame, E_SP_REGNUM);
181124bc
CV
1272 }
1273
1274 /* Now that we have the base address for the stack frame we can
1275 calculate the value of sp in the calling frame. */
1276 trad_frame_set_value (cache->saved_regs, E_SP_REGNUM,
1277 cache->base - cache->sp_offset);
1278
1279 /* Adjust all the saved registers such that they contain addresses
1280 instead of offsets. */
55fa75c3 1281 for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
181124bc
CV
1282 if (trad_frame_addr_p (cache->saved_regs, i))
1283 cache->saved_regs[i].addr += cache->base;
1284
1285 /* The call instruction moves the caller's PC in the callee's LP.
1286 Since this is an unwind, do the reverse. Copy the location of LP
1287 into PC (the address / regnum) so that a request for PC will be
1288 converted into a request for the LP. */
1289
1290 cache->saved_regs[E_PC_REGNUM] = cache->saved_regs[E_LP_REGNUM];
1291
1292 return cache;
1293}
1294
1295
94afd7a6
UW
1296static struct value *
1297v850_frame_prev_register (struct frame_info *this_frame,
1298 void **this_cache, int regnum)
181124bc 1299{
94afd7a6 1300 struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
181124bc
CV
1301
1302 gdb_assert (regnum >= 0);
1303
94afd7a6 1304 return trad_frame_get_prev_register (this_frame, cache->saved_regs, regnum);
181124bc
CV
1305}
1306
1307static void
94afd7a6 1308v850_frame_this_id (struct frame_info *this_frame, void **this_cache,
181124bc
CV
1309 struct frame_id *this_id)
1310{
94afd7a6 1311 struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
181124bc
CV
1312
1313 /* This marks the outermost frame. */
1314 if (cache->base == 0)
1315 return;
1316
1317 *this_id = frame_id_build (cache->saved_regs[E_SP_REGNUM].addr, cache->pc);
1318}
1319
1320static const struct frame_unwind v850_frame_unwind = {
1321 NORMAL_FRAME,
8fbca658 1322 default_frame_unwind_stop_reason,
181124bc 1323 v850_frame_this_id,
94afd7a6
UW
1324 v850_frame_prev_register,
1325 NULL,
1326 default_frame_sniffer
181124bc 1327};
181124bc 1328
181124bc 1329static CORE_ADDR
94afd7a6 1330v850_frame_base_address (struct frame_info *this_frame, void **this_cache)
181124bc 1331{
94afd7a6 1332 struct v850_frame_cache *cache = v850_frame_cache (this_frame, this_cache);
181124bc
CV
1333
1334 return cache->base;
1335}
1336
1337static const struct frame_base v850_frame_base = {
1338 &v850_frame_unwind,
1339 v850_frame_base_address,
1340 v850_frame_base_address,
1341 v850_frame_base_address
1342};
1343
1344static struct gdbarch *
1345v850_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
1346{
1347 struct gdbarch *gdbarch;
83b2706a
KB
1348 struct gdbarch_tdep *tdep;
1349 int e_flags, e_machine;
1350
1351 /* Extract the elf_flags if available. */
1352 if (info.abfd != NULL
1353 && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
1354 {
1355 e_flags = elf_elfheader (info.abfd)->e_flags;
1356 e_machine = elf_elfheader (info.abfd)->e_machine;
1357 }
1358 else
1359 {
1360 e_flags = 0;
1361 e_machine = 0;
1362 }
181124bc 1363
181124bc 1364
83b2706a
KB
1365 /* Try to find the architecture in the list of already defined
1366 architectures. */
1367 for (arches = gdbarch_list_lookup_by_info (arches, &info);
1368 arches != NULL;
1369 arches = gdbarch_list_lookup_by_info (arches->next, &info))
1370 {
1371 if (gdbarch_tdep (arches->gdbarch)->e_flags != e_flags
1372 || gdbarch_tdep (arches->gdbarch)->e_machine != e_machine)
1373 continue;
1374
1375 return arches->gdbarch;
1376 }
cdd238da 1377 tdep = XCNEW (struct gdbarch_tdep);
83b2706a
KB
1378 tdep->e_flags = e_flags;
1379 tdep->e_machine = e_machine;
1380
1381 switch (tdep->e_machine)
1382 {
1383 case EM_V800:
1384 tdep->abi = V850_ABI_RH850;
1385 break;
1386 default:
1387 tdep->abi = V850_ABI_GCC;
1388 break;
1389 }
1390
1391 tdep->eight_byte_align = (tdep->e_flags & EF_RH850_DATA_ALIGN8) ? 1 : 0;
1392 gdbarch = gdbarch_alloc (&info, tdep);
181124bc
CV
1393
1394 switch (info.bfd_arch_info->mach)
1395 {
1396 case bfd_mach_v850:
1397 set_gdbarch_register_name (gdbarch, v850_register_name);
55fa75c3 1398 set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850_REGS);
181124bc
CV
1399 break;
1400 case bfd_mach_v850e:
1401 case bfd_mach_v850e1:
1402 set_gdbarch_register_name (gdbarch, v850e_register_name);
55fa75c3 1403 set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850E_REGS);
181124bc 1404 break;
2aaed979
KB
1405 case bfd_mach_v850e2:
1406 case bfd_mach_v850e2v3:
1407 set_gdbarch_register_name (gdbarch, v850e2_register_name);
55fa75c3 1408 set_gdbarch_num_regs (gdbarch, E_NUM_REGS);
2aaed979 1409 break;
83b2706a
KB
1410 case bfd_mach_v850e3v5:
1411 set_gdbarch_register_name (gdbarch, v850e3v5_register_name);
1412 set_gdbarch_num_regs (gdbarch, E_NUM_OF_V850E3V5_REGS);
1413 break;
181124bc
CV
1414 }
1415
181124bc
CV
1416 set_gdbarch_num_pseudo_regs (gdbarch, 0);
1417 set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
1418 set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
1419 set_gdbarch_fp0_regnum (gdbarch, -1);
1420
1421 set_gdbarch_register_type (gdbarch, v850_register_type);
1422
351a3e56 1423 set_gdbarch_char_signed (gdbarch, 1);
181124bc
CV
1424 set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
1425 set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1426 set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1427 set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1428
1429 set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1430 set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1431 set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
1432
1433 set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1434 set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
1435
1436 set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
181124bc 1437
04180708
YQ
1438 set_gdbarch_breakpoint_kind_from_pc (gdbarch, v850_breakpoint_kind_from_pc);
1439 set_gdbarch_sw_breakpoint_from_kind (gdbarch, v850_sw_breakpoint_from_kind);
181124bc
CV
1440 set_gdbarch_return_value (gdbarch, v850_return_value);
1441 set_gdbarch_push_dummy_call (gdbarch, v850_push_dummy_call);
1442 set_gdbarch_skip_prologue (gdbarch, v850_skip_prologue);
1443
181124bc 1444 set_gdbarch_frame_align (gdbarch, v850_frame_align);
181124bc
CV
1445 frame_base_set_default (gdbarch, &v850_frame_base);
1446
1447 /* Hook in ABI-specific overrides, if they have been registered. */
1448 gdbarch_init_osabi (info, gdbarch);
1449
94afd7a6
UW
1450 dwarf2_append_unwinders (gdbarch);
1451 frame_unwind_append_unwinder (gdbarch, &v850_frame_unwind);
181124bc
CV
1452
1453 return gdbarch;
1454}
1455
181124bc
CV
1456void
1457_initialize_v850_tdep (void)
1458{
1459 register_gdbarch_init (bfd_arch_v850, v850_gdbarch_init);
83b2706a 1460 register_gdbarch_init (bfd_arch_v850_rh850, v850_gdbarch_init);
181124bc 1461}
This page took 1.779817 seconds and 4 git commands to generate.