[deliverable/linux.git] / include / asm-powerpc / hvcall.h

#ifndef _ASM_POWERPC_HVCALL_H
#define _ASM_POWERPC_HVCALL_H
#ifdef __KERNEL__

#define HVSC			.long 0x44000022

#define H_SUCCESS	0
#define H_BUSY		1	/* Hardware busy -- retry later */
#define H_CLOSED	2	/* Resource closed */
#define H_NOT_AVAILABLE 3
#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
#define H_PARTIAL       5
#define H_IN_PROGRESS	14	/* Kind of like busy */
#define H_PAGE_REGISTERED 15
#define H_PARTIAL_STORE   16
#define H_PENDING	17	/* returned from H_POLL_PENDING */
#define H_CONTINUE	18	/* Returned from H_Join on success */
#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
						 is a good time to retry */
#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
						 is a good time to retry */
#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
#define H_HARDWARE	-1	/* Hardware error */
#define H_FUNCTION	-2	/* Function not supported */
#define H_PRIVILEGE	-3	/* Caller not privileged */
#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
#define H_BAD_MODE	-5	/* Illegal msr value */
#define H_PTEG_FULL	-6	/* PTEG is full */
#define H_NOT_FOUND	-7	/* PTE was not found" */
#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
#define H_NO_MEM	-9
#define H_AUTHORITY	-10
#define H_PERMISSION	-11
#define H_DROPPED	-12
#define H_SOURCE_PARM	-13
#define H_DEST_PARM	-14
#define H_REMOTE_PARM	-15
#define H_RESOURCE	-16
#define H_ADAPTER_PARM  -17
#define H_RH_PARM       -18
#define H_RCQ_PARM      -19
#define H_SCQ_PARM      -20
#define H_EQ_PARM       -21
#define H_RT_PARM       -22
#define H_ST_PARM       -23
#define H_SIGT_PARM     -24
#define H_TOKEN_PARM    -25
#define H_MLENGTH_PARM  -27
#define H_MEM_PARM      -28
#define H_MEM_ACCESS_PARM -29
#define H_ATTR_PARM     -30
#define H_PORT_PARM     -31
#define H_MCG_PARM      -32
#define H_VL_PARM       -33
#define H_TSIZE_PARM    -34
#define H_TRACE_PARM    -35

#define H_MASK_PARM     -37
#define H_MCG_FULL      -38
#define H_ALIAS_EXIST   -39
#define H_P_COUNTER     -40
#define H_TABLE_FULL    -41
#define H_ALT_TABLE     -42
#define H_MR_CONDITION  -43
#define H_NOT_ENOUGH_RESOURCES -44
#define H_R_STATE       -45
#define H_RESCINDEND    -46


/* Long Busy is a condition that can be returned by the firmware
 * when a call cannot be completed now, but the identical call
 * should be retried later.  This prevents calls blocking in the
 * firmware for long periods of time.  Annoyingly the firmware can return
 * a range of return codes, hinting at how long we should wait before
 * retrying.  If you don't care for the hint, the macro below is a good
 * way to check for the long_busy return codes
 */
#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
			     && (x <= H_LONG_BUSY_END_RANGE))

/* Flags */
#define H_LARGE_PAGE		(1UL<<(63-16))
#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
#define H_ANDCOND		(1UL<<(63-33))
#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
#define H_COPY_PAGE		(1UL<<(63-49))
#define H_N			(1UL<<(63-61))
#define H_PP1			(1UL<<(63-62))
#define H_PP2			(1UL<<(63-63))

/* DABRX flags */
#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
#define H_DABRX_KERNEL		(1UL<<(63-62))
#define H_DABRX_USER		(1UL<<(63-63))

/* Each control block has to be on a 4K bondary */
#define H_CB_ALIGNMENT          4096

/* pSeries hypervisor opcodes */
#define H_REMOVE		0x04
#define H_ENTER			0x08
#define H_READ			0x0c
#define H_CLEAR_MOD		0x10
#define H_CLEAR_REF		0x14
#define H_PROTECT		0x18
#define H_GET_TCE		0x1c
#define H_PUT_TCE		0x20
#define H_SET_SPRG0		0x24
#define H_SET_DABR		0x28
#define H_PAGE_INIT		0x2c
#define H_SET_ASR		0x30
#define H_ASR_ON		0x34
#define H_ASR_OFF		0x38
#define H_LOGICAL_CI_LOAD	0x3c
#define H_LOGICAL_CI_STORE	0x40
#define H_LOGICAL_CACHE_LOAD	0x44
#define H_LOGICAL_CACHE_STORE	0x48
#define H_LOGICAL_ICBI		0x4c
#define H_LOGICAL_DCBF		0x50
#define H_GET_TERM_CHAR		0x54
#define H_PUT_TERM_CHAR		0x58
#define H_REAL_TO_LOGICAL	0x5c
#define H_HYPERVISOR_DATA	0x60
#define H_EOI			0x64
#define H_CPPR			0x68
#define H_IPI			0x6c
#define H_IPOLL			0x70
#define H_XIRR			0x74
#define H_PERFMON		0x7c
#define H_MIGRATE_DMA		0x78
#define H_REGISTER_VPA		0xDC
#define H_CEDE			0xE0
#define H_CONFER		0xE4
#define H_PROD			0xE8
#define H_GET_PPP		0xEC
#define H_SET_PPP		0xF0
#define H_PURR			0xF4
#define H_PIC			0xF8
#define H_REG_CRQ		0xFC
#define H_FREE_CRQ		0x100
#define H_VIO_SIGNAL		0x104
#define H_SEND_CRQ		0x108
#define H_COPY_RDMA		0x110
#define H_SET_XDABR		0x134
#define H_STUFF_TCE		0x138
#define H_PUT_TCE_INDIRECT	0x13C
#define H_VTERM_PARTNER_INFO	0x150
#define H_REGISTER_VTERM	0x154
#define H_FREE_VTERM		0x158
#define H_RESET_EVENTS          0x15C
#define H_ALLOC_RESOURCE        0x160
#define H_FREE_RESOURCE         0x164
#define H_MODIFY_QP             0x168
#define H_QUERY_QP              0x16C
#define H_REREGISTER_PMR        0x170
#define H_REGISTER_SMR          0x174
#define H_QUERY_MR              0x178
#define H_QUERY_MW              0x17C
#define H_QUERY_HCA             0x180
#define H_QUERY_PORT            0x184
#define H_MODIFY_PORT           0x188
#define H_DEFINE_AQP1           0x18C
#define H_GET_TRACE_BUFFER      0x190
#define H_DEFINE_AQP0           0x194
#define H_RESIZE_MR             0x198
#define H_ATTACH_MCQP           0x19C
#define H_DETACH_MCQP           0x1A0
#define H_CREATE_RPT            0x1A4
#define H_REMOVE_RPT            0x1A8
#define H_REGISTER_RPAGES       0x1AC
#define H_DISABLE_AND_GETC      0x1B0
#define H_ERROR_DATA            0x1B4
#define H_GET_HCA_INFO          0x1B8
#define H_GET_PERF_COUNT        0x1BC
#define H_MANAGE_TRACE          0x1C0
#define H_QUERY_INT_STATE       0x1E4
#define H_POLL_PENDING		0x1D8
#define H_JOIN			0x298
#define H_ENABLE_CRQ		0x2B0

#ifndef __ASSEMBLY__

/* plpar_hcall() -- Generic call interface using above opcodes
 *
 * The actual call interface is a hypervisor call instruction with
 * the opcode in R3 and input args in R4-R7.
 * Status is returned in R3 with variable output values in R4-R11.
 * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
 * and return only two out args which MUST ALWAYS BE PROVIDED.
 */
long plpar_hcall(unsigned long opcode,
		 unsigned long arg1,
		 unsigned long arg2,
		 unsigned long arg3,
		 unsigned long arg4,
		 unsigned long *out1,
		 unsigned long *out2,
		 unsigned long *out3);

/* Same as plpar_hcall but for those opcodes that return no values
 * other than status.  Slightly more efficient.
 */
long plpar_hcall_norets(unsigned long opcode, ...);

/*
 * Special hcall interface for ibmveth support.
 * Takes 8 input parms. Returns a rc and stores the
 * R4 return value in *out1.
 */
long plpar_hcall_8arg_2ret(unsigned long opcode,
			   unsigned long arg1,
			   unsigned long arg2,
			   unsigned long arg3,
			   unsigned long arg4,
			   unsigned long arg5,
			   unsigned long arg6,
			   unsigned long arg7,
			   unsigned long arg8,
			   unsigned long *out1);

/* plpar_hcall_4out()
 *
 * same as plpar_hcall except with 4 output arguments.
 *
 */
long plpar_hcall_4out(unsigned long opcode,
		      unsigned long arg1,
		      unsigned long arg2,
		      unsigned long arg3,
		      unsigned long arg4,
		      unsigned long *out1,
		      unsigned long *out2,
		      unsigned long *out3,
		      unsigned long *out4);

long plpar_hcall_7arg_7ret(unsigned long opcode,
			   unsigned long arg1,
			   unsigned long arg2,
			   unsigned long arg3,
			   unsigned long arg4,
			   unsigned long arg5,
			   unsigned long arg6,
			   unsigned long arg7,
			   unsigned long *out1,
			   unsigned long *out2,
			   unsigned long *out3,
			   unsigned long *out4,
			   unsigned long *out5,
			   unsigned long *out6,
			   unsigned long *out7);

long plpar_hcall_9arg_9ret(unsigned long opcode,
			   unsigned long arg1,
			   unsigned long arg2,
			   unsigned long arg3,
			   unsigned long arg4,
			   unsigned long arg5,
			   unsigned long arg6,
			   unsigned long arg7,
			   unsigned long arg8,
			   unsigned long arg9,
			   unsigned long *out1,
			   unsigned long *out2,
			   unsigned long *out3,
			   unsigned long *out4,
			   unsigned long *out5,
			   unsigned long *out6,
			   unsigned long *out7,
			   unsigned long *out8,
			   unsigned long *out9);

#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
Commit	Line	Data
d3d2176a DG	1	#ifndef _ASM_POWERPC_HVCALL_H
d3d2176a DG	2	#define _ASM_POWERPC_HVCALL_H
88ced031	3	#ifdef __KERNEL__
1da177e4 LT	4
	5	#define HVSC .long 0x44000022
	6
706c8c93 SB	7	#define H_SUCCESS 0
	8	#define H_BUSY 1 /* Hardware busy -- retry later */
	9	#define H_CLOSED 2 /* Resource closed */
b13a96cf	10	#define H_NOT_AVAILABLE 3
706c8c93	11	#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
b13a96cf	12	#define H_PARTIAL 5
706c8c93	13	#define H_IN_PROGRESS 14 /* Kind of like busy */
b13a96cf HS	14	#define H_PAGE_REGISTERED 15
b13a96cf HS	15	#define H_PARTIAL_STORE 16
706c8c93 SB	16	#define H_PENDING 17 /* returned from H_POLL_PENDING */
	17	#define H_CONTINUE 18 /* Returned from H_Join on success */
	18	#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
	19	#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
	20	is a good time to retry */
	21	#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
	22	is a good time to retry */
	23	#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
	24	is a good time to retry */
	25	#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
	26	is a good time to retry */
	27	#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
	28	is a good time to retry */
	29	#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
	30	is a good time to retry */
	31	#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
	32	#define H_HARDWARE -1 /* Hardware error */
	33	#define H_FUNCTION -2 /* Function not supported */
	34	#define H_PRIVILEGE -3 /* Caller not privileged */
	35	#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
	36	#define H_BAD_MODE -5 /* Illegal msr value */
	37	#define H_PTEG_FULL -6 /* PTEG is full */
	38	#define H_NOT_FOUND -7 /* PTE was not found" */
	39	#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
	40	#define H_NO_MEM -9
	41	#define H_AUTHORITY -10
	42	#define H_PERMISSION -11
	43	#define H_DROPPED -12
	44	#define H_SOURCE_PARM -13
	45	#define H_DEST_PARM -14
	46	#define H_REMOTE_PARM -15
	47	#define H_RESOURCE -16
b13a96cf HS	48	#define H_ADAPTER_PARM -17
	49	#define H_RH_PARM -18
	50	#define H_RCQ_PARM -19
	51	#define H_SCQ_PARM -20
	52	#define H_EQ_PARM -21
	53	#define H_RT_PARM -22
	54	#define H_ST_PARM -23
	55	#define H_SIGT_PARM -24
	56	#define H_TOKEN_PARM -25
	57	#define H_MLENGTH_PARM -27
	58	#define H_MEM_PARM -28
	59	#define H_MEM_ACCESS_PARM -29
	60	#define H_ATTR_PARM -30
	61	#define H_PORT_PARM -31
	62	#define H_MCG_PARM -32
	63	#define H_VL_PARM -33
	64	#define H_TSIZE_PARM -34
	65	#define H_TRACE_PARM -35
	66
	67	#define H_MASK_PARM -37
	68	#define H_MCG_FULL -38
	69	#define H_ALIAS_EXIST -39
	70	#define H_P_COUNTER -40
	71	#define H_TABLE_FULL -41
	72	#define H_ALT_TABLE -42
	73	#define H_MR_CONDITION -43
	74	#define H_NOT_ENOUGH_RESOURCES -44
	75	#define H_R_STATE -45
	76	#define H_RESCINDEND -46
	77
1da177e4 LT	78
	79	/* Long Busy is a condition that can be returned by the firmware
	80	* when a call cannot be completed now, but the identical call
	81	* should be retried later. This prevents calls blocking in the
706c8c93	82	* firmware for long periods of time. Annoyingly the firmware can return
1da177e4 LT	83	* a range of return codes, hinting at how long we should wait before
	84	* retrying. If you don't care for the hint, the macro below is a good
	85	* way to check for the long_busy return codes
	86	*/
706c8c93 SB	87	#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
706c8c93 SB	88	&& (x <= H_LONG_BUSY_END_RANGE))
1da177e4 LT	89
	90	/* Flags */
	91	#define H_LARGE_PAGE (1UL<<(63-16))
	92	#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
	93	#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
	94	#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */
	95	#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */
	96	#define H_ANDCOND (1UL<<(63-33))
	97	#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
	98	#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
	99	#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
	100	#define H_COPY_PAGE (1UL<<(63-49))
	101	#define H_N (1UL<<(63-61))
	102	#define H_PP1 (1UL<<(63-62))
	103	#define H_PP2 (1UL<<(63-63))
	104
fd9648df AB	105	/* DABRX flags */
	106	#define H_DABRX_HYPERVISOR (1UL<<(63-61))
	107	#define H_DABRX_KERNEL (1UL<<(63-62))
	108	#define H_DABRX_USER (1UL<<(63-63))
	109
b13a96cf HS	110	/* Each control block has to be on a 4K bondary */
	111	#define H_CB_ALIGNMENT 4096
	112
1da177e4 LT	113	/* pSeries hypervisor opcodes */
	114	#define H_REMOVE 0x04
	115	#define H_ENTER 0x08
	116	#define H_READ 0x0c
	117	#define H_CLEAR_MOD 0x10
	118	#define H_CLEAR_REF 0x14
	119	#define H_PROTECT 0x18
	120	#define H_GET_TCE 0x1c
	121	#define H_PUT_TCE 0x20
	122	#define H_SET_SPRG0 0x24
	123	#define H_SET_DABR 0x28
	124	#define H_PAGE_INIT 0x2c
	125	#define H_SET_ASR 0x30
	126	#define H_ASR_ON 0x34
	127	#define H_ASR_OFF 0x38
	128	#define H_LOGICAL_CI_LOAD 0x3c
	129	#define H_LOGICAL_CI_STORE 0x40
	130	#define H_LOGICAL_CACHE_LOAD 0x44
	131	#define H_LOGICAL_CACHE_STORE 0x48
	132	#define H_LOGICAL_ICBI 0x4c
	133	#define H_LOGICAL_DCBF 0x50
	134	#define H_GET_TERM_CHAR 0x54
	135	#define H_PUT_TERM_CHAR 0x58
	136	#define H_REAL_TO_LOGICAL 0x5c
	137	#define H_HYPERVISOR_DATA 0x60
	138	#define H_EOI 0x64
	139	#define H_CPPR 0x68
	140	#define H_IPI 0x6c
	141	#define H_IPOLL 0x70
	142	#define H_XIRR 0x74
	143	#define H_PERFMON 0x7c
	144	#define H_MIGRATE_DMA 0x78
	145	#define H_REGISTER_VPA 0xDC
706c8c93	146	#define H_CEDE 0xE0
1da177e4	147	#define H_CONFER 0xE4
706c8c93	148	#define H_PROD 0xE8
1da177e4 LT	149	#define H_GET_PPP 0xEC
	150	#define H_SET_PPP 0xF0
	151	#define H_PURR 0xF4
706c8c93	152	#define H_PIC 0xF8
1da177e4 LT	153	#define H_REG_CRQ 0xFC
	154	#define H_FREE_CRQ 0x100
	155	#define H_VIO_SIGNAL 0x104
	156	#define H_SEND_CRQ 0x108
706c8c93	157	#define H_COPY_RDMA 0x110
fd9648df	158	#define H_SET_XDABR 0x134
1da177e4 LT	159	#define H_STUFF_TCE 0x138
	160	#define H_PUT_TCE_INDIRECT 0x13C
	161	#define H_VTERM_PARTNER_INFO 0x150
	162	#define H_REGISTER_VTERM 0x154
	163	#define H_FREE_VTERM 0x158
b13a96cf HS	164	#define H_RESET_EVENTS 0x15C
	165	#define H_ALLOC_RESOURCE 0x160
	166	#define H_FREE_RESOURCE 0x164
	167	#define H_MODIFY_QP 0x168
	168	#define H_QUERY_QP 0x16C
	169	#define H_REREGISTER_PMR 0x170
	170	#define H_REGISTER_SMR 0x174
	171	#define H_QUERY_MR 0x178
	172	#define H_QUERY_MW 0x17C
	173	#define H_QUERY_HCA 0x180
	174	#define H_QUERY_PORT 0x184
	175	#define H_MODIFY_PORT 0x188
	176	#define H_DEFINE_AQP1 0x18C
	177	#define H_GET_TRACE_BUFFER 0x190
	178	#define H_DEFINE_AQP0 0x194
	179	#define H_RESIZE_MR 0x198
	180	#define H_ATTACH_MCQP 0x19C
	181	#define H_DETACH_MCQP 0x1A0
	182	#define H_CREATE_RPT 0x1A4
	183	#define H_REMOVE_RPT 0x1A8
	184	#define H_REGISTER_RPAGES 0x1AC
	185	#define H_DISABLE_AND_GETC 0x1B0
	186	#define H_ERROR_DATA 0x1B4
	187	#define H_GET_HCA_INFO 0x1B8
	188	#define H_GET_PERF_COUNT 0x1BC
	189	#define H_MANAGE_TRACE 0x1C0
	190	#define H_QUERY_INT_STATE 0x1E4
706c8c93	191	#define H_POLL_PENDING 0x1D8
43ccf202 DB	192	#define H_JOIN 0x298
43ccf202 DB	193	#define H_ENABLE_CRQ 0x2B0
1da177e4 LT	194
	195	#ifndef __ASSEMBLY__
	196
	197	/* plpar_hcall() -- Generic call interface using above opcodes
	198	*
	199	* The actual call interface is a hypervisor call instruction with
	200	* the opcode in R3 and input args in R4-R7.
	201	* Status is returned in R3 with variable output values in R4-R11.
	202	* Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
	203	* and return only two out args which MUST ALWAYS BE PROVIDED.
	204	*/
	205	long plpar_hcall(unsigned long opcode,
	206	unsigned long arg1,
	207	unsigned long arg2,
	208	unsigned long arg3,
	209	unsigned long arg4,
	210	unsigned long *out1,
	211	unsigned long *out2,
	212	unsigned long *out3);
	213
	214	/* Same as plpar_hcall but for those opcodes that return no values
	215	* other than status. Slightly more efficient.
	216	*/
	217	long plpar_hcall_norets(unsigned long opcode, ...);
	218
d3d2176a	219	/*
1da177e4 LT	220	* Special hcall interface for ibmveth support.
	221	* Takes 8 input parms. Returns a rc and stores the
	222	* R4 return value in *out1.
	223	*/
	224	long plpar_hcall_8arg_2ret(unsigned long opcode,
	225	unsigned long arg1,
706c8c93	226	unsigned long arg2,
1da177e4 LT	227	unsigned long arg3,
	228	unsigned long arg4,
	229	unsigned long arg5,
	230	unsigned long arg6,
	231	unsigned long arg7,
	232	unsigned long arg8,
	233	unsigned long *out1);
d3d2176a	234
1da177e4 LT	235	/* plpar_hcall_4out()
1da177e4 LT	236	*
d3d2176a DG	237	* same as plpar_hcall except with 4 output arguments.
d3d2176a DG	238	*
1da177e4 LT	239	*/
	240	long plpar_hcall_4out(unsigned long opcode,
	241	unsigned long arg1,
	242	unsigned long arg2,
	243	unsigned long arg3,
	244	unsigned long arg4,
	245	unsigned long *out1,
	246	unsigned long *out2,
	247	unsigned long *out3,
	248	unsigned long *out4);
	249
b13a96cf HS	250	long plpar_hcall_7arg_7ret(unsigned long opcode,
	251	unsigned long arg1,
	252	unsigned long arg2,
	253	unsigned long arg3,
	254	unsigned long arg4,
	255	unsigned long arg5,
	256	unsigned long arg6,
	257	unsigned long arg7,
	258	unsigned long *out1,
	259	unsigned long *out2,
	260	unsigned long *out3,
	261	unsigned long *out4,
	262	unsigned long *out5,
	263	unsigned long *out6,
	264	unsigned long *out7);
	265
	266	long plpar_hcall_9arg_9ret(unsigned long opcode,
	267	unsigned long arg1,
	268	unsigned long arg2,
	269	unsigned long arg3,
	270	unsigned long arg4,
	271	unsigned long arg5,
	272	unsigned long arg6,
	273	unsigned long arg7,
	274	unsigned long arg8,
	275	unsigned long arg9,
	276	unsigned long *out1,
	277	unsigned long *out2,
	278	unsigned long *out3,
	279	unsigned long *out4,
	280	unsigned long *out5,
	281	unsigned long *out6,
	282	unsigned long *out7,
	283	unsigned long *out8,
	284	unsigned long *out9);
	285
1da177e4	286	#endif /* __ASSEMBLY__ */
88ced031	287	#endif /* __KERNEL__ */
d3d2176a	288	#endif /* _ASM_POWERPC_HVCALL_H */