[deliverable/binutils-gdb.git] / include / dis-asm.h

/* Interface between the opcode library and its callers.
   Written by Cygnus Support, 1993.

   The opcode library (libopcodes.a) provides instruction decoders for
   a large variety of instruction sets, callable with an identical
   interface, for making instruction-processing programs more independent
   of the instruction set being processed.  */

#ifndef DIS_ASM_H
#define DIS_ASM_H

#include <stdio.h>
#include "bfd.h"

typedef int (*fprintf_ftype) PARAMS((PTR, const char*, ...));

enum dis_insn_type {
  dis_noninsn,			/* Not a valid instruction */
  dis_nonbranch,		/* Not a branch instruction */
  dis_branch,			/* Unconditional branch */
  dis_condbranch,		/* Conditional branch */
  dis_jsr,			/* Jump to subroutine */
  dis_condjsr,			/* Conditional jump to subroutine */
  dis_dref,			/* Data reference instruction */
  dis_dref2			/* Two data references in instruction */
};

/* This struct is passed into the instruction decoding routine, 
   and is passed back out into each callback.  The various fields are used
   for conveying information from your main routine into your callbacks,
   for passing information into the instruction decoders (such as the
   addresses of the callback functions), or for passing information
   back from the instruction decoders to their callers.

   It must be initialized before it is first passed; this can be done
   by hand, or using one of the initialization macros below.  */

typedef struct disassemble_info {
  fprintf_ftype fprintf_func;
  PTR stream;
  PTR application_data;

  /* Target description.  We could replace this with a pointer to the bfd,
     but that would require one.  There currently isn't any such requirement
     so to avoid introducing one we record these explicitly.  */
  /* The bfd_flavour.  This can be bfd_target_unknown_flavour.  */
  enum bfd_flavour flavour;
  /* The bfd_arch value.  */
  enum bfd_architecture arch;
  /* The bfd_mach value.  */
  unsigned long mach;
  /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */
  enum bfd_endian endian;

  /* An array of pointers to symbols either at the location being disassembled
     or at the start of the function being disassembled.  The array is sorted
     so that the first symbol is intended to be the one used.  The others are
     present for any misc. purposes.  This is not set reliably, but if it is
     not NULL, it is correct.  */
  asymbol **symbols;
  /* Number of symbols in array.  */
  int num_symbols;

  /* For use by the disassembler.
     The top 16 bits are reserved for public use (and are documented here).
     The bottom 16 bits are for the internal use of the disassembler.  */
  unsigned long flags;
#define INSN_HAS_RELOC	0x80000000
  PTR private_data;

  /* Function used to get bytes to disassemble.  MEMADDR is the
     address of the stuff to be disassembled, MYADDR is the address to
     put the bytes in, and LENGTH is the number of bytes to read.
     INFO is a pointer to this struct.
     Returns an errno value or 0 for success.  */
  int (*read_memory_func)
    PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
	     struct disassemble_info *info));

  /* Function which should be called if we get an error that we can't
     recover from.  STATUS is the errno value from read_memory_func and
     MEMADDR is the address that we were trying to read.  INFO is a
     pointer to this struct.  */
  void (*memory_error_func)
    PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));

  /* Function called to print ADDR.  */
  void (*print_address_func)
    PARAMS ((bfd_vma addr, struct disassemble_info *info));

  /* Function called to determine if there is a symbol at the given ADDR.
     If there is, the function returns 1, otherwise it returns 0.
     This is used by ports which support an overlay manager where
     the overlay number is held in the top part of an address.  In
     some circumstances we want to include the overlay number in the
     address, (normally because there is a symbol associated with
     that address), but sometimes we want to mask out the overlay bits.  */
  int (* symbol_at_address_func)
    PARAMS ((bfd_vma addr, struct disassemble_info * info));

  /* These are for buffer_read_memory.  */
  bfd_byte *buffer;
  bfd_vma buffer_vma;
  int buffer_length;

  /* This variable may be set by the instruction decoder.  It suggests
      the number of bytes objdump should display on a single line.  If
      the instruction decoder sets this, it should always set it to
      the same value in order to get reasonable looking output.  */
  int bytes_per_line;

  /* the next two variables control the way objdump displays the raw data */
  /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
  /* output will look like this:
     00:   00000000 00000000
     with the chunks displayed according to "display_endian". */
  int bytes_per_chunk;
  enum bfd_endian display_endian;

  /* Results from instruction decoders.  Not all decoders yet support
     this information.  This info is set each time an instruction is
     decoded, and is only valid for the last such instruction.

     To determine whether this decoder supports this information, set
     insn_info_valid to 0, decode an instruction, then check it.  */

  char insn_info_valid;		/* Branch info has been set. */
  char branch_delay_insns;	/* How many sequential insn's will run before
				   a branch takes effect.  (0 = normal) */
  char data_size;		/* Size of data reference in insn, in bytes */
  enum dis_insn_type insn_type;	/* Type of instruction */
  bfd_vma target;		/* Target address of branch or dref, if known;
				   zero if unknown.  */
  bfd_vma target2;		/* Second target address for dref2 */

} disassemble_info;

\f
/* Standard disassemblers.  Disassemble one instruction at the given
   target address.  Return number of bytes processed.  */
typedef int (*disassembler_ftype)
     PARAMS((bfd_vma, disassemble_info *));

extern int print_insn_big_mips		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_mips	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_i386		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_m68k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_z8001		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_z8002		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300h		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8300s		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_h8500		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_alpha		PARAMS ((bfd_vma, disassemble_info*));
extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
extern int print_insn_big_arm		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_arm	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sparc		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_a29k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_a29k	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_i960		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));
/* start-sanitize-fr30 */
extern int print_insn_fr30		PARAMS ((bfd_vma, disassemble_info*));
/* end-sanitize-fr30 */
extern int print_insn_m32r		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_m88k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_mn10200		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_mn10300		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_ns32k		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_big_powerpc	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_little_powerpc	PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_rs6000		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_d30v		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_tic30		PARAMS ((bfd_vma, disassemble_info*));
extern int print_insn_vax		PARAMS ((bfd_vma, disassemble_info*));
/* start-sanitize-tic80 */
extern int print_insn_tic80		PARAMS ((bfd_vma, disassemble_info*));
/* end-sanitize-tic80 */
/* start-sanitize-sky */
extern int print_insn_dvp		PARAMS ((bfd_vma, disassemble_info*));
extern int dvp_insn_p			PARAMS ((disassemble_info*));
/* end-sanitize-sky */

/* Fetch the disassembler for a given BFD, if that support is available.  */
extern disassembler_ftype disassembler	PARAMS ((bfd *));

\f
/* This block of definitions is for particular callers who read instructions
   into a buffer before calling the instruction decoder.  */

/* Here is a function which callers may wish to use for read_memory_func.
   It gets bytes from a buffer.  */
extern int buffer_read_memory
  PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *));

/* This function goes with buffer_read_memory.
   It prints a message using info->fprintf_func and info->stream.  */
extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));


/* Just print the address in hex.  This is included for completeness even
   though both GDB and objdump provide their own (to print symbolic
   addresses).  */
extern void generic_print_address
  PARAMS ((bfd_vma, struct disassemble_info *));

/* Always true.  */
extern int generic_symbol_at_address
  PARAMS ((bfd_vma, struct disassemble_info *));

/* Macro to initialize a disassemble_info struct.  This should be called
   by all applications creating such a struct.  */
#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
  (INFO).flavour = bfd_target_unknown_flavour, \
  (INFO).arch = bfd_arch_unknown, \
  (INFO).mach = 0, \
  (INFO).endian = BFD_ENDIAN_UNKNOWN, \
  INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)

/* Call this macro to initialize only the internal variables for the
   disassembler.  Architecture dependent things such as byte order, or machine
   variant are not touched by this macro.  This makes things much easier for
   GDB which must initialize these things seperatly.  */

#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
  (INFO).fprintf_func = (FPRINTF_FUNC), \
  (INFO).stream = (STREAM), \
  (INFO).symbols = NULL, \
  (INFO).num_symbols = 0, \
  (INFO).buffer = NULL, \
  (INFO).buffer_vma = 0, \
  (INFO).buffer_length = 0, \
  (INFO).read_memory_func = buffer_read_memory, \
  (INFO).memory_error_func = perror_memory, \
  (INFO).print_address_func = generic_print_address, \
  (INFO).symbol_at_address_func = generic_symbol_at_address, \
  (INFO).flags = 0, \
  (INFO).bytes_per_line = 0, \
  (INFO).bytes_per_chunk = 0, \
  (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
  (INFO).insn_info_valid = 0

#endif /* ! defined (DIS_ASM_H) */
Commit	Line	Data
308a5981 JG	1	/* Interface between the opcode library and its callers.
	2	Written by Cygnus Support, 1993.
	3
	4	The opcode library (libopcodes.a) provides instruction decoders for
	5	a large variety of instruction sets, callable with an identical
	6	interface, for making instruction-processing programs more independent
	7	of the instruction set being processed. */
	8
dc7d3f0c ILT	9	#ifndef DIS_ASM_H
	10	#define DIS_ASM_H
	11
d7e1be46	12	#include <stdio.h>
d7e1be46 PB	13	#include "bfd.h"
d7e1be46 PB	14
8bb2eec8	15	typedef int (fprintf_ftype) PARAMS((PTR, const char, ...));
d7e1be46	16
811b15ef SC	17	enum dis_insn_type {
	18	dis_noninsn, /* Not a valid instruction */
	19	dis_nonbranch, /* Not a branch instruction */
	20	dis_branch, /* Unconditional branch */
	21	dis_condbranch, /* Conditional branch */
	22	dis_jsr, /* Jump to subroutine */
	23	dis_condjsr, /* Conditional jump to subroutine */
	24	dis_dref, /* Data reference instruction */
	25	dis_dref2 /* Two data references in instruction */
	26	};
308a5981 JG	27
	28	/* This struct is passed into the instruction decoding routine,
	29	and is passed back out into each callback. The various fields are used
	30	for conveying information from your main routine into your callbacks,
	31	for passing information into the instruction decoders (such as the
	32	addresses of the callback functions), or for passing information
	33	back from the instruction decoders to their callers.
	34
	35	It must be initialized before it is first passed; this can be done
	36	by hand, or using one of the initialization macros below. */
	37
d7e1be46 PB	38	typedef struct disassemble_info {
d7e1be46 PB	39	fprintf_ftype fprintf_func;
8bb2eec8	40	PTR stream;
308a5981	41	PTR application_data;
5d0734a7	42
3e496fff DE	43	/* Target description. We could replace this with a pointer to the bfd,
	44	but that would require one. There currently isn't any such requirement
	45	so to avoid introducing one we record these explicitly. */
cad8350f JL	46	/* The bfd_flavour. This can be bfd_target_unknown_flavour. */
cad8350f JL	47	enum bfd_flavour flavour;
3e496fff DE	48	/* The bfd_arch value. */
	49	enum bfd_architecture arch;
	50	/* The bfd_mach value. */
	51	unsigned long mach;
	52	/* Endianness (for bi-endian cpus). Mono-endian cpus can ignore this. */
	53	enum bfd_endian endian;
4e331d42 ILT	54
	55	/* An array of pointers to symbols either at the location being disassembled
	56	or at the start of the function being disassembled. The array is sorted
	57	so that the first symbol is intended to be the one used. The others are
	58	present for any misc. purposes. This is not set reliably, but if it is
	59	not NULL, it is correct. */
	60	asymbol **symbols;
	61	/* Number of symbols in array. */
	62	int num_symbols;
3e496fff DE	63
	64	/* For use by the disassembler.
	65	The top 16 bits are reserved for public use (and are documented here).
	66	The bottom 16 bits are for the internal use of the disassembler. */
	67	unsigned long flags;
962ac804	68	#define INSN_HAS_RELOC 0x80000000
5d0734a7 JK	69	PTR private_data;
	70
	71	/* Function used to get bytes to disassemble. MEMADDR is the
	72	address of the stuff to be disassembled, MYADDR is the address to
	73	put the bytes in, and LENGTH is the number of bytes to read.
	74	INFO is a pointer to this struct.
	75	Returns an errno value or 0 for success. */
	76	int (*read_memory_func)
	77	PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
	78	struct disassemble_info *info));
	79
	80	/* Function which should be called if we get an error that we can't
	81	recover from. STATUS is the errno value from read_memory_func and
	82	MEMADDR is the address that we were trying to read. INFO is a
	83	pointer to this struct. */
	84	void (*memory_error_func)
	85	PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));
	86
482d6747 ILT	87	/* Function called to print ADDR. */
	88	void (*print_address_func)
	89	PARAMS ((bfd_vma addr, struct disassemble_info *info));
	90
ea16981a NC	91	/* Function called to determine if there is a symbol at the given ADDR.
	92	If there is, the function returns 1, otherwise it returns 0.
	93	This is used by ports which support an overlay manager where
	94	the overlay number is held in the top part of an address. In
	95	some circumstances we want to include the overlay number in the
	96	address, (normally because there is a symbol associated with
	97	that address), but sometimes we want to mask out the overlay bits. */
	98	int (* symbol_at_address_func)
	99	PARAMS ((bfd_vma addr, struct disassemble_info * info));
	100
5d0734a7 JK	101	/* These are for buffer_read_memory. */
	102	bfd_byte *buffer;
	103	bfd_vma buffer_vma;
	104	int buffer_length;
308a5981	105
ea16981a NC	106	/* This variable may be set by the instruction decoder. It suggests
	107	the number of bytes objdump should display on a single line. If
	108	the instruction decoder sets this, it should always set it to
	109	the same value in order to get reasonable looking output. */
	110	int bytes_per_line;
	111
	112	/* the next two variables control the way objdump displays the raw data */
	113	/* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
	114	/* output will look like this:
	115	00: 00000000 00000000
	116	with the chunks displayed according to "display_endian". */
	117	int bytes_per_chunk;
	118	enum bfd_endian display_endian;
	119
308a5981 JG	120	/* Results from instruction decoders. Not all decoders yet support
	121	this information. This info is set each time an instruction is
	122	decoded, and is only valid for the last such instruction.
	123
	124	To determine whether this decoder supports this information, set
	125	insn_info_valid to 0, decode an instruction, then check it. */
	126
308a5981 JG	127	char insn_info_valid; /* Branch info has been set. */
	128	char branch_delay_insns; /* How many sequential insn's will run before
	129	a branch takes effect. (0 = normal) */
	130	char data_size; /* Size of data reference in insn, in bytes */
	131	enum dis_insn_type insn_type; /* Type of instruction */
	132	bfd_vma target; /* Target address of branch or dref, if known;
	133	zero if unknown. */
	134	bfd_vma target2; /* Second target address for dref2 */
	135
d7e1be46 PB	136	} disassemble_info;
d7e1be46 PB	137
308a5981 JG	138	\f
	139	/* Standard disassemblers. Disassemble one instruction at the given
	140	target address. Return number of bytes processed. */
	141	typedef int (*disassembler_ftype)
	142	PARAMS((bfd_vma, disassemble_info *));
	143
	144	extern int print_insn_big_mips PARAMS ((bfd_vma, disassemble_info*));
	145	extern int print_insn_little_mips PARAMS ((bfd_vma, disassemble_info*));
	146	extern int print_insn_i386 PARAMS ((bfd_vma, disassemble_info*));
	147	extern int print_insn_m68k PARAMS ((bfd_vma, disassemble_info*));
	148	extern int print_insn_z8001 PARAMS ((bfd_vma, disassemble_info*));
	149	extern int print_insn_z8002 PARAMS ((bfd_vma, disassemble_info*));
	150	extern int print_insn_h8300 PARAMS ((bfd_vma, disassemble_info*));
	151	extern int print_insn_h8300h PARAMS ((bfd_vma, disassemble_info*));
16cf520e	152	extern int print_insn_h8300s PARAMS ((bfd_vma, disassemble_info*));
308a5981	153	extern int print_insn_h8500 PARAMS ((bfd_vma, disassemble_info*));
cad8350f	154	extern int print_insn_alpha PARAMS ((bfd_vma, disassemble_info*));
3e496fff	155	extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
3e496fff DE	156	extern int print_insn_big_arm PARAMS ((bfd_vma, disassemble_info*));
3e496fff DE	157	extern int print_insn_little_arm PARAMS ((bfd_vma, disassemble_info*));
308a5981 JG	158	extern int print_insn_sparc PARAMS ((bfd_vma, disassemble_info*));
	159	extern int print_insn_big_a29k PARAMS ((bfd_vma, disassemble_info*));
	160	extern int print_insn_little_a29k PARAMS ((bfd_vma, disassemble_info*));
	161	extern int print_insn_i960 PARAMS ((bfd_vma, disassemble_info*));
	162	extern int print_insn_sh PARAMS ((bfd_vma, disassemble_info*));
811b15ef	163	extern int print_insn_shl PARAMS ((bfd_vma, disassemble_info*));
308a5981	164	extern int print_insn_hppa PARAMS ((bfd_vma, disassemble_info*));
5d6c7d68 NC	165	/* start-sanitize-fr30 */
	166	extern int print_insn_fr30 PARAMS ((bfd_vma, disassemble_info*));
	167	/* end-sanitize-fr30 */
db2d85c6	168	extern int print_insn_m32r PARAMS ((bfd_vma, disassemble_info*));
308a5981	169	extern int print_insn_m88k PARAMS ((bfd_vma, disassemble_info*));
ae1b99e4 JL	170	extern int print_insn_mn10200 PARAMS ((bfd_vma, disassemble_info*));
ae1b99e4 JL	171	extern int print_insn_mn10300 PARAMS ((bfd_vma, disassemble_info*));
811b15ef SC	172	extern int print_insn_ns32k PARAMS ((bfd_vma, disassemble_info*));
	173	extern int print_insn_big_powerpc PARAMS ((bfd_vma, disassemble_info*));
	174	extern int print_insn_little_powerpc PARAMS ((bfd_vma, disassemble_info*));
	175	extern int print_insn_rs6000 PARAMS ((bfd_vma, disassemble_info*));
66032a39	176	extern int print_insn_w65 PARAMS ((bfd_vma, disassemble_info*));
770e0827	177	extern int print_insn_d10v PARAMS ((bfd_vma, disassemble_info*));
ea16981a	178	extern int print_insn_d30v PARAMS ((bfd_vma, disassemble_info*));
cad8350f	179	extern int print_insn_v850 PARAMS ((bfd_vma, disassemble_info*));
4e331d42 ILT	180	extern int print_insn_tic30 PARAMS ((bfd_vma, disassemble_info*));
4e331d42 ILT	181	extern int print_insn_vax PARAMS ((bfd_vma, disassemble_info*));
ea16981a NC	182	/* start-sanitize-tic80 */
	183	extern int print_insn_tic80 PARAMS ((bfd_vma, disassemble_info*));
	184	/* end-sanitize-tic80 */
1eb4e377	185	/* start-sanitize-sky */
7d3eb0dd DE	186	extern int print_insn_dvp PARAMS ((bfd_vma, disassemble_info*));
7d3eb0dd DE	187	extern int dvp_insn_p PARAMS ((disassemble_info*));
1eb4e377	188	/* end-sanitize-sky */
308a5981	189
811b15ef SC	190	/* Fetch the disassembler for a given BFD, if that support is available. */
811b15ef SC	191	extern disassembler_ftype disassembler PARAMS ((bfd *));
308a5981 JG	192
	193	\f
	194	/* This block of definitions is for particular callers who read instructions
	195	into a buffer before calling the instruction decoder. */
	196
5d0734a7 JK	197	/* Here is a function which callers may wish to use for read_memory_func.
	198	It gets bytes from a buffer. */
	199	extern int buffer_read_memory
	200	PARAMS ((bfd_vma, bfd_byte , int, struct disassemble_info ));
	201
	202	/* This function goes with buffer_read_memory.
	203	It prints a message using info->fprintf_func and info->stream. */
	204	extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
d7e1be46	205
308a5981	206
3e496fff	207	/* Just print the address in hex. This is included for completeness even
482d6747 ILT	208	though both GDB and objdump provide their own (to print symbolic
	209	addresses). */
	210	extern void generic_print_address
	211	PARAMS ((bfd_vma, struct disassemble_info *));
	212
ea16981a NC	213	/* Always true. */
	214	extern int generic_symbol_at_address
	215	PARAMS ((bfd_vma, struct disassemble_info *));
	216
16cf520e JL	217	/* Macro to initialize a disassemble_info struct. This should be called
16cf520e JL	218	by all applications creating such a struct. */
f29a36c0	219	#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
cad8350f	220	(INFO).flavour = bfd_target_unknown_flavour, \
a29322f7 SG	221	(INFO).arch = bfd_arch_unknown, \
	222	(INFO).mach = 0, \
	223	(INFO).endian = BFD_ENDIAN_UNKNOWN, \
	224	INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
	225
	226	/* Call this macro to initialize only the internal variables for the
	227	disassembler. Architecture dependent things such as byte order, or machine
	228	variant are not touched by this macro. This makes things much easier for
	229	GDB which must initialize these things seperatly. */
	230
	231	#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
f29a36c0	232	(INFO).fprintf_func = (FPRINTF_FUNC), \
5d0734a7	233	(INFO).stream = (STREAM), \
4e331d42 ILT	234	(INFO).symbols = NULL, \
4e331d42 ILT	235	(INFO).num_symbols = 0, \
5d0734a7 JK	236	(INFO).buffer = NULL, \
	237	(INFO).buffer_vma = 0, \
	238	(INFO).buffer_length = 0, \
	239	(INFO).read_memory_func = buffer_read_memory, \
482d6747	240	(INFO).memory_error_func = perror_memory, \
308a5981	241	(INFO).print_address_func = generic_print_address, \
ea16981a	242	(INFO).symbol_at_address_func = generic_symbol_at_address, \
3e496fff	243	(INFO).flags = 0, \
ea16981a NC	244	(INFO).bytes_per_line = 0, \
	245	(INFO).bytes_per_chunk = 0, \
	246	(INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
308a5981	247	(INFO).insn_info_valid = 0
dc7d3f0c ILT	248
dc7d3f0c ILT	249	#endif /* ! defined (DIS_ASM_H) */