Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
[deliverable/linux.git] / include / linux / interrupt.h
CommitLineData
1da177e4
LT
1/* interrupt.h */
2#ifndef _LINUX_INTERRUPT_H
3#define _LINUX_INTERRUPT_H
4
1da177e4
LT
5#include <linux/kernel.h>
6#include <linux/linkage.h>
7#include <linux/bitops.h>
8#include <linux/preempt.h>
9#include <linux/cpumask.h>
10#include <linux/hardirq.h>
f037360f 11#include <linux/sched.h>
1da177e4
LT
12#include <asm/atomic.h>
13#include <asm/ptrace.h>
14#include <asm/system.h>
15
16/*
17 * For 2.4.x compatibility, 2.4.x can use
18 *
19 * typedef void irqreturn_t;
20 * #define IRQ_NONE
21 * #define IRQ_HANDLED
22 * #define IRQ_RETVAL(x)
23 *
24 * To mix old-style and new-style irq handler returns.
25 *
26 * IRQ_NONE means we didn't handle it.
27 * IRQ_HANDLED means that we did have a valid interrupt and handled it.
28 * IRQ_RETVAL(x) selects on the two depending on x being non-zero (for handled)
29 */
30typedef int irqreturn_t;
31
32#define IRQ_NONE (0)
33#define IRQ_HANDLED (1)
34#define IRQ_RETVAL(x) ((x) != 0)
35
36struct irqaction {
37 irqreturn_t (*handler)(int, void *, struct pt_regs *);
38 unsigned long flags;
39 cpumask_t mask;
40 const char *name;
41 void *dev_id;
42 struct irqaction *next;
43 int irq;
44 struct proc_dir_entry *dir;
45};
46
47extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
48extern int request_irq(unsigned int,
49 irqreturn_t (*handler)(int, void *, struct pt_regs *),
50 unsigned long, const char *, void *);
51extern void free_irq(unsigned int, void *);
52
53
54#ifdef CONFIG_GENERIC_HARDIRQS
55extern void disable_irq_nosync(unsigned int irq);
56extern void disable_irq(unsigned int irq);
57extern void enable_irq(unsigned int irq);
58#endif
59
3f74478b
AK
60#ifndef __ARCH_SET_SOFTIRQ_PENDING
61#define set_softirq_pending(x) (local_softirq_pending() = (x))
62#define or_softirq_pending(x) (local_softirq_pending() |= (x))
63#endif
64
1da177e4
LT
65/*
66 * Temporary defines for UP kernels, until all code gets fixed.
67 */
68#ifndef CONFIG_SMP
69static inline void __deprecated cli(void)
70{
71 local_irq_disable();
72}
73static inline void __deprecated sti(void)
74{
75 local_irq_enable();
76}
77static inline void __deprecated save_flags(unsigned long *x)
78{
79 local_save_flags(*x);
80}
ef9ceab2 81#define save_flags(x) save_flags(&x)
1da177e4
LT
82static inline void __deprecated restore_flags(unsigned long x)
83{
84 local_irq_restore(x);
85}
86
87static inline void __deprecated save_and_cli(unsigned long *x)
88{
89 local_irq_save(*x);
90}
91#define save_and_cli(x) save_and_cli(&x)
92#endif /* CONFIG_SMP */
93
94/* SoftIRQ primitives. */
95#define local_bh_disable() \
96 do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0)
97#define __local_bh_enable() \
98 do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0)
99
100extern void local_bh_enable(void);
101
102/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
103 frequency threaded job scheduling. For almost all the purposes
104 tasklets are more than enough. F.e. all serial device BHs et
105 al. should be converted to tasklets, not to softirqs.
106 */
107
108enum
109{
110 HI_SOFTIRQ=0,
111 TIMER_SOFTIRQ,
112 NET_TX_SOFTIRQ,
113 NET_RX_SOFTIRQ,
ff856bad 114 BLOCK_SOFTIRQ,
1da177e4
LT
115 TASKLET_SOFTIRQ
116};
117
118/* softirq mask and active fields moved to irq_cpustat_t in
119 * asm/hardirq.h to get better cache usage. KAO
120 */
121
122struct softirq_action
123{
124 void (*action)(struct softirq_action *);
125 void *data;
126};
127
128asmlinkage void do_softirq(void);
129extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
130extern void softirq_init(void);
3f74478b 131#define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
1da177e4
LT
132extern void FASTCALL(raise_softirq_irqoff(unsigned int nr));
133extern void FASTCALL(raise_softirq(unsigned int nr));
134
135
136/* Tasklets --- multithreaded analogue of BHs.
137
138 Main feature differing them of generic softirqs: tasklet
139 is running only on one CPU simultaneously.
140
141 Main feature differing them of BHs: different tasklets
142 may be run simultaneously on different CPUs.
143
144 Properties:
145 * If tasklet_schedule() is called, then tasklet is guaranteed
146 to be executed on some cpu at least once after this.
147 * If the tasklet is already scheduled, but its excecution is still not
148 started, it will be executed only once.
149 * If this tasklet is already running on another CPU (or schedule is called
150 from tasklet itself), it is rescheduled for later.
151 * Tasklet is strictly serialized wrt itself, but not
152 wrt another tasklets. If client needs some intertask synchronization,
153 he makes it with spinlocks.
154 */
155
156struct tasklet_struct
157{
158 struct tasklet_struct *next;
159 unsigned long state;
160 atomic_t count;
161 void (*func)(unsigned long);
162 unsigned long data;
163};
164
165#define DECLARE_TASKLET(name, func, data) \
166struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
167
168#define DECLARE_TASKLET_DISABLED(name, func, data) \
169struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
170
171
172enum
173{
174 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */
175 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */
176};
177
178#ifdef CONFIG_SMP
179static inline int tasklet_trylock(struct tasklet_struct *t)
180{
181 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
182}
183
184static inline void tasklet_unlock(struct tasklet_struct *t)
185{
186 smp_mb__before_clear_bit();
187 clear_bit(TASKLET_STATE_RUN, &(t)->state);
188}
189
190static inline void tasklet_unlock_wait(struct tasklet_struct *t)
191{
192 while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
193}
194#else
195#define tasklet_trylock(t) 1
196#define tasklet_unlock_wait(t) do { } while (0)
197#define tasklet_unlock(t) do { } while (0)
198#endif
199
200extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t));
201
202static inline void tasklet_schedule(struct tasklet_struct *t)
203{
204 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
205 __tasklet_schedule(t);
206}
207
208extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t));
209
210static inline void tasklet_hi_schedule(struct tasklet_struct *t)
211{
212 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
213 __tasklet_hi_schedule(t);
214}
215
216
217static inline void tasklet_disable_nosync(struct tasklet_struct *t)
218{
219 atomic_inc(&t->count);
220 smp_mb__after_atomic_inc();
221}
222
223static inline void tasklet_disable(struct tasklet_struct *t)
224{
225 tasklet_disable_nosync(t);
226 tasklet_unlock_wait(t);
227 smp_mb();
228}
229
230static inline void tasklet_enable(struct tasklet_struct *t)
231{
232 smp_mb__before_atomic_dec();
233 atomic_dec(&t->count);
234}
235
236static inline void tasklet_hi_enable(struct tasklet_struct *t)
237{
238 smp_mb__before_atomic_dec();
239 atomic_dec(&t->count);
240}
241
242extern void tasklet_kill(struct tasklet_struct *t);
243extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
244extern void tasklet_init(struct tasklet_struct *t,
245 void (*func)(unsigned long), unsigned long data);
246
247/*
248 * Autoprobing for irqs:
249 *
250 * probe_irq_on() and probe_irq_off() provide robust primitives
251 * for accurate IRQ probing during kernel initialization. They are
252 * reasonably simple to use, are not "fooled" by spurious interrupts,
253 * and, unlike other attempts at IRQ probing, they do not get hung on
254 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
255 *
256 * For reasonably foolproof probing, use them as follows:
257 *
258 * 1. clear and/or mask the device's internal interrupt.
259 * 2. sti();
260 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
261 * 4. enable the device and cause it to trigger an interrupt.
262 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
263 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
264 * 7. service the device to clear its pending interrupt.
265 * 8. loop again if paranoia is required.
266 *
267 * probe_irq_on() returns a mask of allocated irq's.
268 *
269 * probe_irq_off() takes the mask as a parameter,
270 * and returns the irq number which occurred,
271 * or zero if none occurred, or a negative irq number
272 * if more than one irq occurred.
273 */
274
275#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
276static inline unsigned long probe_irq_on(void)
277{
278 return 0;
279}
280static inline int probe_irq_off(unsigned long val)
281{
282 return 0;
283}
284static inline unsigned int probe_irq_mask(unsigned long val)
285{
286 return 0;
287}
288#else
289extern unsigned long probe_irq_on(void); /* returns 0 on failure */
290extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
291extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */
292#endif
293
294#endif
This page took 0.401441 seconds and 5 git commands to generate.