Commit | Line | Data |
---|---|---|
deaf39ef SG |
1 | /* |
2 | * Host communication command constants for ChromeOS EC | |
3 | * | |
4 | * Copyright (C) 2012 Google, Inc | |
5 | * | |
6 | * This software is licensed under the terms of the GNU General Public | |
7 | * License version 2, as published by the Free Software Foundation, and | |
8 | * may be copied, distributed, and modified under those terms. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * The ChromeOS EC multi function device is used to mux all the requests | |
16 | * to the EC device for its multiple features: keyboard controller, | |
17 | * battery charging and regulator control, firmware update. | |
18 | * | |
19 | * NOTE: This file is copied verbatim from the ChromeOS EC Open Source | |
20 | * project in an attempt to make future updates easy to make. | |
21 | */ | |
22 | ||
23 | #ifndef __CROS_EC_COMMANDS_H | |
24 | #define __CROS_EC_COMMANDS_H | |
25 | ||
26 | /* | |
5271db29 | 27 | * Current version of this protocol |
deaf39ef | 28 | * |
5271db29 BR |
29 | * TODO(crosbug.com/p/11223): This is effectively useless; protocol is |
30 | * determined in other ways. Remove this once the kernel code no longer | |
31 | * depends on it. | |
deaf39ef | 32 | */ |
deaf39ef SG |
33 | #define EC_PROTO_VERSION 0x00000002 |
34 | ||
35 | /* Command version mask */ | |
36 | #define EC_VER_MASK(version) (1UL << (version)) | |
37 | ||
38 | /* I/O addresses for ACPI commands */ | |
39 | #define EC_LPC_ADDR_ACPI_DATA 0x62 | |
40 | #define EC_LPC_ADDR_ACPI_CMD 0x66 | |
41 | ||
42 | /* I/O addresses for host command */ | |
43 | #define EC_LPC_ADDR_HOST_DATA 0x200 | |
44 | #define EC_LPC_ADDR_HOST_CMD 0x204 | |
45 | ||
46 | /* I/O addresses for host command args and params */ | |
5271db29 BR |
47 | /* Protocol version 2 */ |
48 | #define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ | |
49 | #define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is | |
50 | * EC_PROTO2_MAX_PARAM_SIZE */ | |
51 | /* Protocol version 3 */ | |
52 | #define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ | |
53 | #define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ | |
54 | ||
55 | /* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff | |
56 | * and they tell the kernel that so we have to think of it as two parts. */ | |
57 | #define EC_HOST_CMD_REGION0 0x800 | |
58 | #define EC_HOST_CMD_REGION1 0x880 | |
59 | #define EC_HOST_CMD_REGION_SIZE 0x80 | |
deaf39ef SG |
60 | |
61 | /* EC command register bit functions */ | |
62 | #define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */ | |
63 | #define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */ | |
64 | #define EC_LPC_CMDR_BUSY (1 << 2) /* EC is busy processing a command */ | |
65 | #define EC_LPC_CMDR_CMD (1 << 3) /* Last host write was a command */ | |
66 | #define EC_LPC_CMDR_ACPI_BRST (1 << 4) /* Burst mode (not used) */ | |
67 | #define EC_LPC_CMDR_SCI (1 << 5) /* SCI event is pending */ | |
68 | #define EC_LPC_CMDR_SMI (1 << 6) /* SMI event is pending */ | |
69 | ||
70 | #define EC_LPC_ADDR_MEMMAP 0x900 | |
71 | #define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ | |
72 | #define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ | |
73 | ||
74 | /* The offset address of each type of data in mapped memory. */ | |
5271db29 BR |
75 | #define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ |
76 | #define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ | |
77 | #define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ | |
78 | #define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ | |
deaf39ef SG |
79 | #define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ |
80 | #define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ | |
81 | #define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ | |
82 | #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ | |
83 | #define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ | |
5271db29 BR |
84 | #define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ |
85 | /* Unused 0x28 - 0x2f */ | |
86 | #define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ | |
87 | /* Unused 0x31 - 0x33 */ | |
88 | #define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ | |
89 | /* Reserve 0x38 - 0x3f for additional host event-related stuff */ | |
90 | /* Battery values are all 32 bits */ | |
deaf39ef SG |
91 | #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ |
92 | #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ | |
93 | #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ | |
94 | #define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, defined below */ | |
95 | #define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ | |
96 | #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ | |
97 | #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ | |
98 | #define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ | |
5271db29 | 99 | /* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ |
deaf39ef SG |
100 | #define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ |
101 | #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ | |
102 | #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ | |
103 | #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ | |
5271db29 BR |
104 | #define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ |
105 | /* Unused 0x84 - 0x8f */ | |
106 | #define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ | |
107 | /* Unused 0x91 */ | |
108 | #define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */ | |
109 | #define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ | |
110 | /* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */ | |
111 | ||
112 | ||
113 | /* Define the format of the accelerometer mapped memory status byte. */ | |
114 | #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f | |
115 | #define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) | |
116 | #define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) | |
deaf39ef SG |
117 | |
118 | /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ | |
119 | #define EC_TEMP_SENSOR_ENTRIES 16 | |
120 | /* | |
121 | * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B. | |
122 | * | |
123 | * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. | |
124 | */ | |
125 | #define EC_TEMP_SENSOR_B_ENTRIES 8 | |
5271db29 BR |
126 | |
127 | /* Special values for mapped temperature sensors */ | |
deaf39ef SG |
128 | #define EC_TEMP_SENSOR_NOT_PRESENT 0xff |
129 | #define EC_TEMP_SENSOR_ERROR 0xfe | |
130 | #define EC_TEMP_SENSOR_NOT_POWERED 0xfd | |
131 | #define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc | |
132 | /* | |
133 | * The offset of temperature value stored in mapped memory. This allows | |
134 | * reporting a temperature range of 200K to 454K = -73C to 181C. | |
135 | */ | |
136 | #define EC_TEMP_SENSOR_OFFSET 200 | |
137 | ||
5271db29 BR |
138 | /* |
139 | * Number of ALS readings at EC_MEMMAP_ALS | |
140 | */ | |
141 | #define EC_ALS_ENTRIES 2 | |
142 | ||
143 | /* | |
144 | * The default value a temperature sensor will return when it is present but | |
145 | * has not been read this boot. This is a reasonable number to avoid | |
146 | * triggering alarms on the host. | |
147 | */ | |
148 | #define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) | |
149 | ||
deaf39ef SG |
150 | #define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ |
151 | #define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ | |
152 | #define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ | |
153 | ||
154 | /* Battery bit flags at EC_MEMMAP_BATT_FLAG. */ | |
155 | #define EC_BATT_FLAG_AC_PRESENT 0x01 | |
156 | #define EC_BATT_FLAG_BATT_PRESENT 0x02 | |
157 | #define EC_BATT_FLAG_DISCHARGING 0x04 | |
158 | #define EC_BATT_FLAG_CHARGING 0x08 | |
159 | #define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 | |
160 | ||
161 | /* Switch flags at EC_MEMMAP_SWITCHES */ | |
162 | #define EC_SWITCH_LID_OPEN 0x01 | |
163 | #define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 | |
164 | #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 | |
5271db29 BR |
165 | /* Was recovery requested via keyboard; now unused. */ |
166 | #define EC_SWITCH_IGNORE1 0x08 | |
deaf39ef SG |
167 | /* Recovery requested via dedicated signal (from servo board) */ |
168 | #define EC_SWITCH_DEDICATED_RECOVERY 0x10 | |
169 | /* Was fake developer mode switch; now unused. Remove in next refactor. */ | |
170 | #define EC_SWITCH_IGNORE0 0x20 | |
171 | ||
172 | /* Host command interface flags */ | |
173 | /* Host command interface supports LPC args (LPC interface only) */ | |
174 | #define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 | |
5271db29 BR |
175 | /* Host command interface supports version 3 protocol */ |
176 | #define EC_HOST_CMD_FLAG_VERSION_3 0x02 | |
deaf39ef SG |
177 | |
178 | /* Wireless switch flags */ | |
5271db29 BR |
179 | #define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ |
180 | #define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ | |
181 | #define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ | |
182 | #define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ | |
183 | #define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ | |
deaf39ef SG |
184 | |
185 | /* | |
186 | * This header file is used in coreboot both in C and ACPI code. The ACPI code | |
187 | * is pre-processed to handle constants but the ASL compiler is unable to | |
188 | * handle actual C code so keep it separate. | |
189 | */ | |
190 | #ifndef __ACPI__ | |
191 | ||
5271db29 BR |
192 | /* |
193 | * Define __packed if someone hasn't beat us to it. Linux kernel style | |
194 | * checking prefers __packed over __attribute__((packed)). | |
195 | */ | |
196 | #ifndef __packed | |
197 | #define __packed __attribute__((packed)) | |
198 | #endif | |
199 | ||
deaf39ef SG |
200 | /* LPC command status byte masks */ |
201 | /* EC has written a byte in the data register and host hasn't read it yet */ | |
202 | #define EC_LPC_STATUS_TO_HOST 0x01 | |
203 | /* Host has written a command/data byte and the EC hasn't read it yet */ | |
204 | #define EC_LPC_STATUS_FROM_HOST 0x02 | |
205 | /* EC is processing a command */ | |
206 | #define EC_LPC_STATUS_PROCESSING 0x04 | |
207 | /* Last write to EC was a command, not data */ | |
208 | #define EC_LPC_STATUS_LAST_CMD 0x08 | |
209 | /* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */ | |
210 | #define EC_LPC_STATUS_BURST_MODE 0x10 | |
211 | /* SCI event is pending (requesting SCI query) */ | |
212 | #define EC_LPC_STATUS_SCI_PENDING 0x20 | |
213 | /* SMI event is pending (requesting SMI query) */ | |
214 | #define EC_LPC_STATUS_SMI_PENDING 0x40 | |
215 | /* (reserved) */ | |
216 | #define EC_LPC_STATUS_RESERVED 0x80 | |
217 | ||
218 | /* | |
219 | * EC is busy. This covers both the EC processing a command, and the host has | |
220 | * written a new command but the EC hasn't picked it up yet. | |
221 | */ | |
222 | #define EC_LPC_STATUS_BUSY_MASK \ | |
223 | (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) | |
224 | ||
225 | /* Host command response codes */ | |
226 | enum ec_status { | |
227 | EC_RES_SUCCESS = 0, | |
228 | EC_RES_INVALID_COMMAND = 1, | |
229 | EC_RES_ERROR = 2, | |
230 | EC_RES_INVALID_PARAM = 3, | |
231 | EC_RES_ACCESS_DENIED = 4, | |
232 | EC_RES_INVALID_RESPONSE = 5, | |
233 | EC_RES_INVALID_VERSION = 6, | |
234 | EC_RES_INVALID_CHECKSUM = 7, | |
235 | EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */ | |
236 | EC_RES_UNAVAILABLE = 9, /* No response available */ | |
237 | EC_RES_TIMEOUT = 10, /* We got a timeout */ | |
238 | EC_RES_OVERFLOW = 11, /* Table / data overflow */ | |
5271db29 BR |
239 | EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ |
240 | EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ | |
241 | EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ | |
deaf39ef SG |
242 | }; |
243 | ||
244 | /* | |
245 | * Host event codes. Note these are 1-based, not 0-based, because ACPI query | |
246 | * EC command uses code 0 to mean "no event pending". We explicitly specify | |
247 | * each value in the enum listing so they won't change if we delete/insert an | |
248 | * item or rearrange the list (it needs to be stable across platforms, not | |
249 | * just within a single compiled instance). | |
250 | */ | |
251 | enum host_event_code { | |
252 | EC_HOST_EVENT_LID_CLOSED = 1, | |
253 | EC_HOST_EVENT_LID_OPEN = 2, | |
254 | EC_HOST_EVENT_POWER_BUTTON = 3, | |
255 | EC_HOST_EVENT_AC_CONNECTED = 4, | |
256 | EC_HOST_EVENT_AC_DISCONNECTED = 5, | |
257 | EC_HOST_EVENT_BATTERY_LOW = 6, | |
258 | EC_HOST_EVENT_BATTERY_CRITICAL = 7, | |
259 | EC_HOST_EVENT_BATTERY = 8, | |
260 | EC_HOST_EVENT_THERMAL_THRESHOLD = 9, | |
261 | EC_HOST_EVENT_THERMAL_OVERLOAD = 10, | |
262 | EC_HOST_EVENT_THERMAL = 11, | |
263 | EC_HOST_EVENT_USB_CHARGER = 12, | |
264 | EC_HOST_EVENT_KEY_PRESSED = 13, | |
265 | /* | |
266 | * EC has finished initializing the host interface. The host can check | |
267 | * for this event following sending a EC_CMD_REBOOT_EC command to | |
268 | * determine when the EC is ready to accept subsequent commands. | |
269 | */ | |
270 | EC_HOST_EVENT_INTERFACE_READY = 14, | |
271 | /* Keyboard recovery combo has been pressed */ | |
272 | EC_HOST_EVENT_KEYBOARD_RECOVERY = 15, | |
273 | ||
274 | /* Shutdown due to thermal overload */ | |
275 | EC_HOST_EVENT_THERMAL_SHUTDOWN = 16, | |
276 | /* Shutdown due to battery level too low */ | |
277 | EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, | |
278 | ||
5271db29 BR |
279 | /* Suggest that the AP throttle itself */ |
280 | EC_HOST_EVENT_THROTTLE_START = 18, | |
281 | /* Suggest that the AP resume normal speed */ | |
282 | EC_HOST_EVENT_THROTTLE_STOP = 19, | |
283 | ||
284 | /* Hang detect logic detected a hang and host event timeout expired */ | |
285 | EC_HOST_EVENT_HANG_DETECT = 20, | |
286 | /* Hang detect logic detected a hang and warm rebooted the AP */ | |
287 | EC_HOST_EVENT_HANG_REBOOT = 21, | |
288 | ||
deaf39ef SG |
289 | /* |
290 | * The high bit of the event mask is not used as a host event code. If | |
291 | * it reads back as set, then the entire event mask should be | |
292 | * considered invalid by the host. This can happen when reading the | |
293 | * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is | |
294 | * not initialized on the EC, or improperly configured on the host. | |
295 | */ | |
296 | EC_HOST_EVENT_INVALID = 32 | |
297 | }; | |
298 | /* Host event mask */ | |
299 | #define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) | |
300 | ||
301 | /* Arguments at EC_LPC_ADDR_HOST_ARGS */ | |
302 | struct ec_lpc_host_args { | |
303 | uint8_t flags; | |
304 | uint8_t command_version; | |
305 | uint8_t data_size; | |
306 | /* | |
307 | * Checksum; sum of command + flags + command_version + data_size + | |
308 | * all params/response data bytes. | |
309 | */ | |
310 | uint8_t checksum; | |
311 | } __packed; | |
312 | ||
313 | /* Flags for ec_lpc_host_args.flags */ | |
314 | /* | |
315 | * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command | |
316 | * params. | |
317 | * | |
318 | * If EC gets a command and this flag is not set, this is an old-style command. | |
319 | * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with | |
320 | * unknown length. EC must respond with an old-style response (that is, | |
321 | * withouth setting EC_HOST_ARGS_FLAG_TO_HOST). | |
322 | */ | |
323 | #define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 | |
324 | /* | |
325 | * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response. | |
326 | * | |
327 | * If EC responds to a command and this flag is not set, this is an old-style | |
328 | * response. Command version is 0 and response data from EC is at | |
329 | * EC_LPC_ADDR_OLD_PARAM with unknown length. | |
330 | */ | |
331 | #define EC_HOST_ARGS_FLAG_TO_HOST 0x02 | |
332 | ||
5271db29 BR |
333 | /*****************************************************************************/ |
334 | /* | |
335 | * Byte codes returned by EC over SPI interface. | |
336 | * | |
337 | * These can be used by the AP to debug the EC interface, and to determine | |
338 | * when the EC is not in a state where it will ever get around to responding | |
339 | * to the AP. | |
340 | * | |
341 | * Example of sequence of bytes read from EC for a current good transfer: | |
342 | * 1. - - AP asserts chip select (CS#) | |
343 | * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request | |
344 | * 3. - - EC starts handling CS# interrupt | |
345 | * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request | |
346 | * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in | |
347 | * bytes looking for EC_SPI_FRAME_START | |
348 | * 6. - - EC finishes processing and sets up response | |
349 | * 7. EC_SPI_FRAME_START - AP reads frame byte | |
350 | * 8. (response packet) - AP reads response packet | |
351 | * 9. EC_SPI_PAST_END - Any additional bytes read by AP | |
352 | * 10 - - AP deasserts chip select | |
353 | * 11 - - EC processes CS# interrupt and sets up DMA for | |
354 | * next request | |
355 | * | |
356 | * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than | |
357 | * the following byte values: | |
358 | * EC_SPI_OLD_READY | |
359 | * EC_SPI_RX_READY | |
360 | * EC_SPI_RECEIVING | |
361 | * EC_SPI_PROCESSING | |
362 | * | |
363 | * Then the EC found an error in the request, or was not ready for the request | |
364 | * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, | |
365 | * because the EC is unable to tell when the AP is done sending its request. | |
366 | */ | |
367 | ||
368 | /* | |
369 | * Framing byte which precedes a response packet from the EC. After sending a | |
370 | * request, the AP will clock in bytes until it sees the framing byte, then | |
371 | * clock in the response packet. | |
372 | */ | |
373 | #define EC_SPI_FRAME_START 0xec | |
374 | ||
375 | /* | |
376 | * Padding bytes which are clocked out after the end of a response packet. | |
377 | */ | |
378 | #define EC_SPI_PAST_END 0xed | |
379 | ||
380 | /* | |
381 | * EC is ready to receive, and has ignored the byte sent by the AP. EC expects | |
382 | * that the AP will send a valid packet header (starting with | |
383 | * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. | |
384 | */ | |
385 | #define EC_SPI_RX_READY 0xf8 | |
386 | ||
387 | /* | |
388 | * EC has started receiving the request from the AP, but hasn't started | |
389 | * processing it yet. | |
390 | */ | |
391 | #define EC_SPI_RECEIVING 0xf9 | |
392 | ||
393 | /* EC has received the entire request from the AP and is processing it. */ | |
394 | #define EC_SPI_PROCESSING 0xfa | |
395 | ||
396 | /* | |
397 | * EC received bad data from the AP, such as a packet header with an invalid | |
398 | * length. EC will ignore all data until chip select deasserts. | |
399 | */ | |
400 | #define EC_SPI_RX_BAD_DATA 0xfb | |
401 | ||
402 | /* | |
403 | * EC received data from the AP before it was ready. That is, the AP asserted | |
404 | * chip select and started clocking data before the EC was ready to receive it. | |
405 | * EC will ignore all data until chip select deasserts. | |
406 | */ | |
407 | #define EC_SPI_NOT_READY 0xfc | |
408 | ||
409 | /* | |
410 | * EC was ready to receive a request from the AP. EC has treated the byte sent | |
411 | * by the AP as part of a request packet, or (for old-style ECs) is processing | |
412 | * a fully received packet but is not ready to respond yet. | |
413 | */ | |
414 | #define EC_SPI_OLD_READY 0xfd | |
415 | ||
416 | /*****************************************************************************/ | |
417 | ||
418 | /* | |
419 | * Protocol version 2 for I2C and SPI send a request this way: | |
420 | * | |
421 | * 0 EC_CMD_VERSION0 + (command version) | |
422 | * 1 Command number | |
423 | * 2 Length of params = N | |
424 | * 3..N+2 Params, if any | |
425 | * N+3 8-bit checksum of bytes 0..N+2 | |
426 | * | |
427 | * The corresponding response is: | |
428 | * | |
429 | * 0 Result code (EC_RES_*) | |
430 | * 1 Length of params = M | |
431 | * 2..M+1 Params, if any | |
432 | * M+2 8-bit checksum of bytes 0..M+1 | |
433 | */ | |
434 | #define EC_PROTO2_REQUEST_HEADER_BYTES 3 | |
435 | #define EC_PROTO2_REQUEST_TRAILER_BYTES 1 | |
436 | #define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ | |
437 | EC_PROTO2_REQUEST_TRAILER_BYTES) | |
438 | ||
439 | #define EC_PROTO2_RESPONSE_HEADER_BYTES 2 | |
440 | #define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 | |
441 | #define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ | |
442 | EC_PROTO2_RESPONSE_TRAILER_BYTES) | |
443 | ||
444 | /* Parameter length was limited by the LPC interface */ | |
445 | #define EC_PROTO2_MAX_PARAM_SIZE 0xfc | |
446 | ||
447 | /* Maximum request and response packet sizes for protocol version 2 */ | |
448 | #define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ | |
449 | EC_PROTO2_MAX_PARAM_SIZE) | |
450 | #define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ | |
451 | EC_PROTO2_MAX_PARAM_SIZE) | |
452 | ||
453 | /*****************************************************************************/ | |
454 | ||
455 | /* | |
456 | * Value written to legacy command port / prefix byte to indicate protocol | |
457 | * 3+ structs are being used. Usage is bus-dependent. | |
458 | */ | |
459 | #define EC_COMMAND_PROTOCOL_3 0xda | |
460 | ||
461 | #define EC_HOST_REQUEST_VERSION 3 | |
462 | ||
463 | /* Version 3 request from host */ | |
464 | struct ec_host_request { | |
465 | /* Struct version (=3) | |
466 | * | |
467 | * EC will return EC_RES_INVALID_HEADER if it receives a header with a | |
468 | * version it doesn't know how to parse. | |
469 | */ | |
470 | uint8_t struct_version; | |
471 | ||
472 | /* | |
473 | * Checksum of request and data; sum of all bytes including checksum | |
474 | * should total to 0. | |
475 | */ | |
476 | uint8_t checksum; | |
477 | ||
478 | /* Command code */ | |
479 | uint16_t command; | |
480 | ||
481 | /* Command version */ | |
482 | uint8_t command_version; | |
483 | ||
484 | /* Unused byte in current protocol version; set to 0 */ | |
485 | uint8_t reserved; | |
486 | ||
487 | /* Length of data which follows this header */ | |
488 | uint16_t data_len; | |
489 | } __packed; | |
490 | ||
491 | #define EC_HOST_RESPONSE_VERSION 3 | |
492 | ||
493 | /* Version 3 response from EC */ | |
494 | struct ec_host_response { | |
495 | /* Struct version (=3) */ | |
496 | uint8_t struct_version; | |
497 | ||
498 | /* | |
499 | * Checksum of response and data; sum of all bytes including checksum | |
500 | * should total to 0. | |
501 | */ | |
502 | uint8_t checksum; | |
503 | ||
504 | /* Result code (EC_RES_*) */ | |
505 | uint16_t result; | |
506 | ||
507 | /* Length of data which follows this header */ | |
508 | uint16_t data_len; | |
509 | ||
510 | /* Unused bytes in current protocol version; set to 0 */ | |
511 | uint16_t reserved; | |
512 | } __packed; | |
513 | ||
514 | /*****************************************************************************/ | |
deaf39ef SG |
515 | /* |
516 | * Notes on commands: | |
517 | * | |
256ab950 | 518 | * Each command is an 16-bit command value. Commands which take params or |
deaf39ef SG |
519 | * return response data specify structs for that data. If no struct is |
520 | * specified, the command does not input or output data, respectively. | |
521 | * Parameter/response length is implicit in the structs. Some underlying | |
522 | * communication protocols (I2C, SPI) may add length or checksum headers, but | |
523 | * those are implementation-dependent and not defined here. | |
524 | */ | |
525 | ||
526 | /*****************************************************************************/ | |
527 | /* General / test commands */ | |
528 | ||
529 | /* | |
530 | * Get protocol version, used to deal with non-backward compatible protocol | |
531 | * changes. | |
532 | */ | |
533 | #define EC_CMD_PROTO_VERSION 0x00 | |
534 | ||
535 | struct ec_response_proto_version { | |
536 | uint32_t version; | |
537 | } __packed; | |
538 | ||
539 | /* | |
540 | * Hello. This is a simple command to test the EC is responsive to | |
541 | * commands. | |
542 | */ | |
543 | #define EC_CMD_HELLO 0x01 | |
544 | ||
545 | struct ec_params_hello { | |
546 | uint32_t in_data; /* Pass anything here */ | |
547 | } __packed; | |
548 | ||
549 | struct ec_response_hello { | |
550 | uint32_t out_data; /* Output will be in_data + 0x01020304 */ | |
551 | } __packed; | |
552 | ||
553 | /* Get version number */ | |
554 | #define EC_CMD_GET_VERSION 0x02 | |
555 | ||
556 | enum ec_current_image { | |
557 | EC_IMAGE_UNKNOWN = 0, | |
558 | EC_IMAGE_RO, | |
559 | EC_IMAGE_RW | |
560 | }; | |
561 | ||
562 | struct ec_response_get_version { | |
563 | /* Null-terminated version strings for RO, RW */ | |
564 | char version_string_ro[32]; | |
565 | char version_string_rw[32]; | |
566 | char reserved[32]; /* Was previously RW-B string */ | |
567 | uint32_t current_image; /* One of ec_current_image */ | |
568 | } __packed; | |
569 | ||
570 | /* Read test */ | |
571 | #define EC_CMD_READ_TEST 0x03 | |
572 | ||
573 | struct ec_params_read_test { | |
574 | uint32_t offset; /* Starting value for read buffer */ | |
575 | uint32_t size; /* Size to read in bytes */ | |
576 | } __packed; | |
577 | ||
578 | struct ec_response_read_test { | |
579 | uint32_t data[32]; | |
580 | } __packed; | |
581 | ||
582 | /* | |
583 | * Get build information | |
584 | * | |
585 | * Response is null-terminated string. | |
586 | */ | |
587 | #define EC_CMD_GET_BUILD_INFO 0x04 | |
588 | ||
589 | /* Get chip info */ | |
590 | #define EC_CMD_GET_CHIP_INFO 0x05 | |
591 | ||
592 | struct ec_response_get_chip_info { | |
593 | /* Null-terminated strings */ | |
594 | char vendor[32]; | |
595 | char name[32]; | |
596 | char revision[32]; /* Mask version */ | |
597 | } __packed; | |
598 | ||
599 | /* Get board HW version */ | |
600 | #define EC_CMD_GET_BOARD_VERSION 0x06 | |
601 | ||
602 | struct ec_response_board_version { | |
603 | uint16_t board_version; /* A monotonously incrementing number. */ | |
604 | } __packed; | |
605 | ||
606 | /* | |
607 | * Read memory-mapped data. | |
608 | * | |
609 | * This is an alternate interface to memory-mapped data for bus protocols | |
610 | * which don't support direct-mapped memory - I2C, SPI, etc. | |
611 | * | |
612 | * Response is params.size bytes of data. | |
613 | */ | |
614 | #define EC_CMD_READ_MEMMAP 0x07 | |
615 | ||
616 | struct ec_params_read_memmap { | |
617 | uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */ | |
618 | uint8_t size; /* Size to read in bytes */ | |
619 | } __packed; | |
620 | ||
621 | /* Read versions supported for a command */ | |
622 | #define EC_CMD_GET_CMD_VERSIONS 0x08 | |
623 | ||
624 | struct ec_params_get_cmd_versions { | |
625 | uint8_t cmd; /* Command to check */ | |
626 | } __packed; | |
627 | ||
628 | struct ec_response_get_cmd_versions { | |
629 | /* | |
630 | * Mask of supported versions; use EC_VER_MASK() to compare with a | |
631 | * desired version. | |
632 | */ | |
633 | uint32_t version_mask; | |
634 | } __packed; | |
635 | ||
636 | /* | |
637 | * Check EC communcations status (busy). This is needed on i2c/spi but not | |
638 | * on lpc since it has its own out-of-band busy indicator. | |
639 | * | |
640 | * lpc must read the status from the command register. Attempting this on | |
641 | * lpc will overwrite the args/parameter space and corrupt its data. | |
642 | */ | |
643 | #define EC_CMD_GET_COMMS_STATUS 0x09 | |
644 | ||
645 | /* Avoid using ec_status which is for return values */ | |
646 | enum ec_comms_status { | |
647 | EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ | |
648 | }; | |
649 | ||
650 | struct ec_response_get_comms_status { | |
651 | uint32_t flags; /* Mask of enum ec_comms_status */ | |
652 | } __packed; | |
653 | ||
5271db29 BR |
654 | /* Fake a variety of responses, purely for testing purposes. */ |
655 | #define EC_CMD_TEST_PROTOCOL 0x0a | |
656 | ||
657 | /* Tell the EC what to send back to us. */ | |
658 | struct ec_params_test_protocol { | |
659 | uint32_t ec_result; | |
660 | uint32_t ret_len; | |
661 | uint8_t buf[32]; | |
662 | } __packed; | |
663 | ||
664 | /* Here it comes... */ | |
665 | struct ec_response_test_protocol { | |
666 | uint8_t buf[32]; | |
667 | } __packed; | |
668 | ||
669 | /* Get prococol information */ | |
670 | #define EC_CMD_GET_PROTOCOL_INFO 0x0b | |
671 | ||
672 | /* Flags for ec_response_get_protocol_info.flags */ | |
673 | /* EC_RES_IN_PROGRESS may be returned if a command is slow */ | |
674 | #define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) | |
675 | ||
676 | struct ec_response_get_protocol_info { | |
677 | /* Fields which exist if at least protocol version 3 supported */ | |
678 | ||
679 | /* Bitmask of protocol versions supported (1 << n means version n)*/ | |
680 | uint32_t protocol_versions; | |
681 | ||
682 | /* Maximum request packet size, in bytes */ | |
683 | uint16_t max_request_packet_size; | |
684 | ||
685 | /* Maximum response packet size, in bytes */ | |
686 | uint16_t max_response_packet_size; | |
687 | ||
688 | /* Flags; see EC_PROTOCOL_INFO_* */ | |
689 | uint32_t flags; | |
690 | } __packed; | |
691 | ||
692 | ||
693 | /*****************************************************************************/ | |
694 | /* Get/Set miscellaneous values */ | |
695 | ||
696 | /* The upper byte of .flags tells what to do (nothing means "get") */ | |
697 | #define EC_GSV_SET 0x80000000 | |
698 | ||
699 | /* The lower three bytes of .flags identifies the parameter, if that has | |
700 | meaning for an individual command. */ | |
701 | #define EC_GSV_PARAM_MASK 0x00ffffff | |
702 | ||
703 | struct ec_params_get_set_value { | |
704 | uint32_t flags; | |
705 | uint32_t value; | |
706 | } __packed; | |
707 | ||
708 | struct ec_response_get_set_value { | |
709 | uint32_t flags; | |
710 | uint32_t value; | |
711 | } __packed; | |
712 | ||
713 | /* More than one command can use these structs to get/set paramters. */ | |
714 | #define EC_CMD_GSV_PAUSE_IN_S5 0x0c | |
715 | ||
deaf39ef SG |
716 | |
717 | /*****************************************************************************/ | |
718 | /* Flash commands */ | |
719 | ||
720 | /* Get flash info */ | |
721 | #define EC_CMD_FLASH_INFO 0x10 | |
722 | ||
5271db29 | 723 | /* Version 0 returns these fields */ |
deaf39ef SG |
724 | struct ec_response_flash_info { |
725 | /* Usable flash size, in bytes */ | |
726 | uint32_t flash_size; | |
727 | /* | |
728 | * Write block size. Write offset and size must be a multiple | |
729 | * of this. | |
730 | */ | |
731 | uint32_t write_block_size; | |
732 | /* | |
733 | * Erase block size. Erase offset and size must be a multiple | |
734 | * of this. | |
735 | */ | |
736 | uint32_t erase_block_size; | |
737 | /* | |
738 | * Protection block size. Protection offset and size must be a | |
739 | * multiple of this. | |
740 | */ | |
741 | uint32_t protect_block_size; | |
742 | } __packed; | |
743 | ||
5271db29 BR |
744 | /* Flags for version 1+ flash info command */ |
745 | /* EC flash erases bits to 0 instead of 1 */ | |
746 | #define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) | |
747 | ||
748 | /* | |
749 | * Version 1 returns the same initial fields as version 0, with additional | |
750 | * fields following. | |
751 | * | |
752 | * gcc anonymous structs don't seem to get along with the __packed directive; | |
753 | * if they did we'd define the version 0 struct as a sub-struct of this one. | |
754 | */ | |
755 | struct ec_response_flash_info_1 { | |
756 | /* Version 0 fields; see above for description */ | |
757 | uint32_t flash_size; | |
758 | uint32_t write_block_size; | |
759 | uint32_t erase_block_size; | |
760 | uint32_t protect_block_size; | |
761 | ||
762 | /* Version 1 adds these fields: */ | |
763 | /* | |
764 | * Ideal write size in bytes. Writes will be fastest if size is | |
765 | * exactly this and offset is a multiple of this. For example, an EC | |
766 | * may have a write buffer which can do half-page operations if data is | |
767 | * aligned, and a slower word-at-a-time write mode. | |
768 | */ | |
769 | uint32_t write_ideal_size; | |
770 | ||
771 | /* Flags; see EC_FLASH_INFO_* */ | |
772 | uint32_t flags; | |
773 | } __packed; | |
774 | ||
deaf39ef SG |
775 | /* |
776 | * Read flash | |
777 | * | |
778 | * Response is params.size bytes of data. | |
779 | */ | |
780 | #define EC_CMD_FLASH_READ 0x11 | |
781 | ||
782 | struct ec_params_flash_read { | |
783 | uint32_t offset; /* Byte offset to read */ | |
784 | uint32_t size; /* Size to read in bytes */ | |
785 | } __packed; | |
786 | ||
787 | /* Write flash */ | |
788 | #define EC_CMD_FLASH_WRITE 0x12 | |
5271db29 BR |
789 | #define EC_VER_FLASH_WRITE 1 |
790 | ||
791 | /* Version 0 of the flash command supported only 64 bytes of data */ | |
792 | #define EC_FLASH_WRITE_VER0_SIZE 64 | |
deaf39ef SG |
793 | |
794 | struct ec_params_flash_write { | |
795 | uint32_t offset; /* Byte offset to write */ | |
796 | uint32_t size; /* Size to write in bytes */ | |
5271db29 | 797 | /* Followed by data to write */ |
deaf39ef SG |
798 | } __packed; |
799 | ||
800 | /* Erase flash */ | |
801 | #define EC_CMD_FLASH_ERASE 0x13 | |
802 | ||
803 | struct ec_params_flash_erase { | |
804 | uint32_t offset; /* Byte offset to erase */ | |
805 | uint32_t size; /* Size to erase in bytes */ | |
806 | } __packed; | |
807 | ||
808 | /* | |
809 | * Get/set flash protection. | |
810 | * | |
811 | * If mask!=0, sets/clear the requested bits of flags. Depending on the | |
812 | * firmware write protect GPIO, not all flags will take effect immediately; | |
813 | * some flags require a subsequent hard reset to take effect. Check the | |
814 | * returned flags bits to see what actually happened. | |
815 | * | |
816 | * If mask=0, simply returns the current flags state. | |
817 | */ | |
818 | #define EC_CMD_FLASH_PROTECT 0x15 | |
819 | #define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ | |
820 | ||
821 | /* Flags for flash protection */ | |
822 | /* RO flash code protected when the EC boots */ | |
823 | #define EC_FLASH_PROTECT_RO_AT_BOOT (1 << 0) | |
824 | /* | |
825 | * RO flash code protected now. If this bit is set, at-boot status cannot | |
826 | * be changed. | |
827 | */ | |
828 | #define EC_FLASH_PROTECT_RO_NOW (1 << 1) | |
829 | /* Entire flash code protected now, until reboot. */ | |
830 | #define EC_FLASH_PROTECT_ALL_NOW (1 << 2) | |
831 | /* Flash write protect GPIO is asserted now */ | |
832 | #define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3) | |
833 | /* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ | |
834 | #define EC_FLASH_PROTECT_ERROR_STUCK (1 << 4) | |
835 | /* | |
836 | * Error - flash protection is in inconsistent state. At least one bank of | |
837 | * flash which should be protected is not protected. Usually fixed by | |
838 | * re-requesting the desired flags, or by a hard reset if that fails. | |
839 | */ | |
840 | #define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5) | |
841 | /* Entile flash code protected when the EC boots */ | |
842 | #define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) | |
843 | ||
844 | struct ec_params_flash_protect { | |
845 | uint32_t mask; /* Bits in flags to apply */ | |
846 | uint32_t flags; /* New flags to apply */ | |
847 | } __packed; | |
848 | ||
849 | struct ec_response_flash_protect { | |
850 | /* Current value of flash protect flags */ | |
851 | uint32_t flags; | |
852 | /* | |
853 | * Flags which are valid on this platform. This allows the caller | |
854 | * to distinguish between flags which aren't set vs. flags which can't | |
855 | * be set on this platform. | |
856 | */ | |
857 | uint32_t valid_flags; | |
858 | /* Flags which can be changed given the current protection state */ | |
859 | uint32_t writable_flags; | |
860 | } __packed; | |
861 | ||
862 | /* | |
863 | * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash | |
864 | * write protect. These commands may be reused with version > 0. | |
865 | */ | |
866 | ||
867 | /* Get the region offset/size */ | |
868 | #define EC_CMD_FLASH_REGION_INFO 0x16 | |
869 | #define EC_VER_FLASH_REGION_INFO 1 | |
870 | ||
871 | enum ec_flash_region { | |
872 | /* Region which holds read-only EC image */ | |
5271db29 | 873 | EC_FLASH_REGION_RO = 0, |
deaf39ef SG |
874 | /* Region which holds rewritable EC image */ |
875 | EC_FLASH_REGION_RW, | |
876 | /* | |
877 | * Region which should be write-protected in the factory (a superset of | |
878 | * EC_FLASH_REGION_RO) | |
879 | */ | |
880 | EC_FLASH_REGION_WP_RO, | |
5271db29 BR |
881 | /* Number of regions */ |
882 | EC_FLASH_REGION_COUNT, | |
deaf39ef SG |
883 | }; |
884 | ||
885 | struct ec_params_flash_region_info { | |
886 | uint32_t region; /* enum ec_flash_region */ | |
887 | } __packed; | |
888 | ||
889 | struct ec_response_flash_region_info { | |
890 | uint32_t offset; | |
891 | uint32_t size; | |
892 | } __packed; | |
893 | ||
894 | /* Read/write VbNvContext */ | |
895 | #define EC_CMD_VBNV_CONTEXT 0x17 | |
896 | #define EC_VER_VBNV_CONTEXT 1 | |
897 | #define EC_VBNV_BLOCK_SIZE 16 | |
898 | ||
899 | enum ec_vbnvcontext_op { | |
900 | EC_VBNV_CONTEXT_OP_READ, | |
901 | EC_VBNV_CONTEXT_OP_WRITE, | |
902 | }; | |
903 | ||
904 | struct ec_params_vbnvcontext { | |
905 | uint32_t op; | |
906 | uint8_t block[EC_VBNV_BLOCK_SIZE]; | |
907 | } __packed; | |
908 | ||
909 | struct ec_response_vbnvcontext { | |
910 | uint8_t block[EC_VBNV_BLOCK_SIZE]; | |
911 | } __packed; | |
912 | ||
913 | /*****************************************************************************/ | |
914 | /* PWM commands */ | |
915 | ||
916 | /* Get fan target RPM */ | |
917 | #define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20 | |
918 | ||
919 | struct ec_response_pwm_get_fan_rpm { | |
920 | uint32_t rpm; | |
921 | } __packed; | |
922 | ||
923 | /* Set target fan RPM */ | |
924 | #define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21 | |
925 | ||
926 | struct ec_params_pwm_set_fan_target_rpm { | |
927 | uint32_t rpm; | |
928 | } __packed; | |
929 | ||
930 | /* Get keyboard backlight */ | |
931 | #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22 | |
932 | ||
933 | struct ec_response_pwm_get_keyboard_backlight { | |
934 | uint8_t percent; | |
935 | uint8_t enabled; | |
936 | } __packed; | |
937 | ||
938 | /* Set keyboard backlight */ | |
939 | #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23 | |
940 | ||
941 | struct ec_params_pwm_set_keyboard_backlight { | |
942 | uint8_t percent; | |
943 | } __packed; | |
944 | ||
945 | /* Set target fan PWM duty cycle */ | |
946 | #define EC_CMD_PWM_SET_FAN_DUTY 0x24 | |
947 | ||
948 | struct ec_params_pwm_set_fan_duty { | |
949 | uint32_t percent; | |
950 | } __packed; | |
951 | ||
952 | /*****************************************************************************/ | |
953 | /* | |
954 | * Lightbar commands. This looks worse than it is. Since we only use one HOST | |
955 | * command to say "talk to the lightbar", we put the "and tell it to do X" part | |
956 | * into a subcommand. We'll make separate structs for subcommands with | |
957 | * different input args, so that we know how much to expect. | |
958 | */ | |
959 | #define EC_CMD_LIGHTBAR_CMD 0x28 | |
960 | ||
961 | struct rgb_s { | |
962 | uint8_t r, g, b; | |
963 | }; | |
964 | ||
965 | #define LB_BATTERY_LEVELS 4 | |
966 | /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a | |
967 | * host command, but the alignment is the same regardless. Keep it that way. | |
968 | */ | |
256ab950 | 969 | struct lightbar_params_v0 { |
deaf39ef | 970 | /* Timing */ |
5271db29 BR |
971 | int32_t google_ramp_up; |
972 | int32_t google_ramp_down; | |
973 | int32_t s3s0_ramp_up; | |
974 | int32_t s0_tick_delay[2]; /* AC=0/1 */ | |
975 | int32_t s0a_tick_delay[2]; /* AC=0/1 */ | |
976 | int32_t s0s3_ramp_down; | |
977 | int32_t s3_sleep_for; | |
978 | int32_t s3_ramp_up; | |
979 | int32_t s3_ramp_down; | |
deaf39ef SG |
980 | |
981 | /* Oscillation */ | |
982 | uint8_t new_s0; | |
983 | uint8_t osc_min[2]; /* AC=0/1 */ | |
984 | uint8_t osc_max[2]; /* AC=0/1 */ | |
985 | uint8_t w_ofs[2]; /* AC=0/1 */ | |
986 | ||
987 | /* Brightness limits based on the backlight and AC. */ | |
988 | uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ | |
989 | uint8_t bright_bl_on_min[2]; /* AC=0/1 */ | |
990 | uint8_t bright_bl_on_max[2]; /* AC=0/1 */ | |
991 | ||
992 | /* Battery level thresholds */ | |
993 | uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; | |
994 | ||
995 | /* Map [AC][battery_level] to color index */ | |
996 | uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ | |
997 | uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ | |
998 | ||
999 | /* Color palette */ | |
1000 | struct rgb_s color[8]; /* 0-3 are Google colors */ | |
1001 | } __packed; | |
1002 | ||
256ab950 SB |
1003 | struct lightbar_params_v1 { |
1004 | /* Timing */ | |
1005 | int32_t google_ramp_up; | |
1006 | int32_t google_ramp_down; | |
1007 | int32_t s3s0_ramp_up; | |
1008 | int32_t s0_tick_delay[2]; /* AC=0/1 */ | |
1009 | int32_t s0a_tick_delay[2]; /* AC=0/1 */ | |
1010 | int32_t s0s3_ramp_down; | |
1011 | int32_t s3_sleep_for; | |
1012 | int32_t s3_ramp_up; | |
1013 | int32_t s3_ramp_down; | |
1014 | int32_t tap_tick_delay; | |
1015 | int32_t tap_display_time; | |
1016 | ||
1017 | /* Tap-for-battery params */ | |
1018 | uint8_t tap_pct_red; | |
1019 | uint8_t tap_pct_green; | |
1020 | uint8_t tap_seg_min_on; | |
1021 | uint8_t tap_seg_max_on; | |
1022 | uint8_t tap_seg_osc; | |
1023 | uint8_t tap_idx[3]; | |
1024 | ||
1025 | /* Oscillation */ | |
1026 | uint8_t osc_min[2]; /* AC=0/1 */ | |
1027 | uint8_t osc_max[2]; /* AC=0/1 */ | |
1028 | uint8_t w_ofs[2]; /* AC=0/1 */ | |
1029 | ||
1030 | /* Brightness limits based on the backlight and AC. */ | |
1031 | uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ | |
1032 | uint8_t bright_bl_on_min[2]; /* AC=0/1 */ | |
1033 | uint8_t bright_bl_on_max[2]; /* AC=0/1 */ | |
1034 | ||
1035 | /* Battery level thresholds */ | |
1036 | uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; | |
1037 | ||
1038 | /* Map [AC][battery_level] to color index */ | |
1039 | uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ | |
1040 | uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ | |
1041 | ||
1042 | /* Color palette */ | |
1043 | struct rgb_s color[8]; /* 0-3 are Google colors */ | |
1044 | } __packed; | |
1045 | ||
deaf39ef SG |
1046 | struct ec_params_lightbar { |
1047 | uint8_t cmd; /* Command (see enum lightbar_command) */ | |
1048 | union { | |
1049 | struct { | |
1050 | /* no args */ | |
256ab950 SB |
1051 | } dump, off, on, init, get_seq, get_params_v0, get_params_v1, |
1052 | version, get_brightness, get_demo; | |
deaf39ef | 1053 | |
256ab950 | 1054 | struct { |
deaf39ef | 1055 | uint8_t num; |
256ab950 | 1056 | } set_brightness, seq, demo; |
deaf39ef | 1057 | |
256ab950 | 1058 | struct { |
deaf39ef SG |
1059 | uint8_t ctrl, reg, value; |
1060 | } reg; | |
1061 | ||
256ab950 | 1062 | struct { |
deaf39ef | 1063 | uint8_t led, red, green, blue; |
256ab950 SB |
1064 | } set_rgb; |
1065 | ||
1066 | struct { | |
1067 | uint8_t led; | |
1068 | } get_rgb; | |
deaf39ef | 1069 | |
256ab950 SB |
1070 | struct lightbar_params_v0 set_params_v0; |
1071 | struct lightbar_params_v1 set_params_v1; | |
deaf39ef SG |
1072 | }; |
1073 | } __packed; | |
1074 | ||
1075 | struct ec_response_lightbar { | |
1076 | union { | |
256ab950 | 1077 | struct { |
deaf39ef SG |
1078 | struct { |
1079 | uint8_t reg; | |
1080 | uint8_t ic0; | |
1081 | uint8_t ic1; | |
1082 | } vals[23]; | |
1083 | } dump; | |
1084 | ||
256ab950 | 1085 | struct { |
deaf39ef | 1086 | uint8_t num; |
256ab950 | 1087 | } get_seq, get_brightness, get_demo; |
deaf39ef | 1088 | |
256ab950 SB |
1089 | struct lightbar_params_v0 get_params_v0; |
1090 | struct lightbar_params_v1 get_params_v1; | |
deaf39ef | 1091 | |
256ab950 | 1092 | struct { |
5271db29 BR |
1093 | uint32_t num; |
1094 | uint32_t flags; | |
1095 | } version; | |
1096 | ||
256ab950 SB |
1097 | struct { |
1098 | uint8_t red, green, blue; | |
1099 | } get_rgb; | |
1100 | ||
deaf39ef SG |
1101 | struct { |
1102 | /* no return params */ | |
256ab950 SB |
1103 | } off, on, init, set_brightness, seq, reg, set_rgb, |
1104 | demo, set_params_v0, set_params_v1; | |
deaf39ef SG |
1105 | }; |
1106 | } __packed; | |
1107 | ||
1108 | /* Lightbar commands */ | |
1109 | enum lightbar_command { | |
1110 | LIGHTBAR_CMD_DUMP = 0, | |
1111 | LIGHTBAR_CMD_OFF = 1, | |
1112 | LIGHTBAR_CMD_ON = 2, | |
1113 | LIGHTBAR_CMD_INIT = 3, | |
256ab950 | 1114 | LIGHTBAR_CMD_SET_BRIGHTNESS = 4, |
deaf39ef SG |
1115 | LIGHTBAR_CMD_SEQ = 5, |
1116 | LIGHTBAR_CMD_REG = 6, | |
256ab950 | 1117 | LIGHTBAR_CMD_SET_RGB = 7, |
deaf39ef SG |
1118 | LIGHTBAR_CMD_GET_SEQ = 8, |
1119 | LIGHTBAR_CMD_DEMO = 9, | |
256ab950 SB |
1120 | LIGHTBAR_CMD_GET_PARAMS_V0 = 10, |
1121 | LIGHTBAR_CMD_SET_PARAMS_V0 = 11, | |
5271db29 | 1122 | LIGHTBAR_CMD_VERSION = 12, |
256ab950 SB |
1123 | LIGHTBAR_CMD_GET_BRIGHTNESS = 13, |
1124 | LIGHTBAR_CMD_GET_RGB = 14, | |
1125 | LIGHTBAR_CMD_GET_DEMO = 15, | |
1126 | LIGHTBAR_CMD_GET_PARAMS_V1 = 16, | |
1127 | LIGHTBAR_CMD_SET_PARAMS_V1 = 17, | |
deaf39ef SG |
1128 | LIGHTBAR_NUM_CMDS |
1129 | }; | |
1130 | ||
5271db29 BR |
1131 | /*****************************************************************************/ |
1132 | /* LED control commands */ | |
1133 | ||
1134 | #define EC_CMD_LED_CONTROL 0x29 | |
1135 | ||
1136 | enum ec_led_id { | |
1137 | /* LED to indicate battery state of charge */ | |
1138 | EC_LED_ID_BATTERY_LED = 0, | |
1139 | /* | |
1140 | * LED to indicate system power state (on or in suspend). | |
1141 | * May be on power button or on C-panel. | |
1142 | */ | |
1143 | EC_LED_ID_POWER_LED, | |
1144 | /* LED on power adapter or its plug */ | |
1145 | EC_LED_ID_ADAPTER_LED, | |
1146 | ||
1147 | EC_LED_ID_COUNT | |
1148 | }; | |
1149 | ||
1150 | /* LED control flags */ | |
1151 | #define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */ | |
1152 | #define EC_LED_FLAGS_AUTO (1 << 1) /* Switch LED back to automatic control */ | |
1153 | ||
1154 | enum ec_led_colors { | |
1155 | EC_LED_COLOR_RED = 0, | |
1156 | EC_LED_COLOR_GREEN, | |
1157 | EC_LED_COLOR_BLUE, | |
1158 | EC_LED_COLOR_YELLOW, | |
1159 | EC_LED_COLOR_WHITE, | |
1160 | ||
1161 | EC_LED_COLOR_COUNT | |
1162 | }; | |
1163 | ||
1164 | struct ec_params_led_control { | |
1165 | uint8_t led_id; /* Which LED to control */ | |
1166 | uint8_t flags; /* Control flags */ | |
1167 | ||
1168 | uint8_t brightness[EC_LED_COLOR_COUNT]; | |
1169 | } __packed; | |
1170 | ||
1171 | struct ec_response_led_control { | |
1172 | /* | |
1173 | * Available brightness value range. | |
1174 | * | |
1175 | * Range 0 means color channel not present. | |
1176 | * Range 1 means on/off control. | |
1177 | * Other values means the LED is control by PWM. | |
1178 | */ | |
1179 | uint8_t brightness_range[EC_LED_COLOR_COUNT]; | |
1180 | } __packed; | |
1181 | ||
deaf39ef SG |
1182 | /*****************************************************************************/ |
1183 | /* Verified boot commands */ | |
1184 | ||
1185 | /* | |
1186 | * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be | |
1187 | * reused for other purposes with version > 0. | |
1188 | */ | |
1189 | ||
1190 | /* Verified boot hash command */ | |
1191 | #define EC_CMD_VBOOT_HASH 0x2A | |
1192 | ||
1193 | struct ec_params_vboot_hash { | |
1194 | uint8_t cmd; /* enum ec_vboot_hash_cmd */ | |
1195 | uint8_t hash_type; /* enum ec_vboot_hash_type */ | |
1196 | uint8_t nonce_size; /* Nonce size; may be 0 */ | |
1197 | uint8_t reserved0; /* Reserved; set 0 */ | |
1198 | uint32_t offset; /* Offset in flash to hash */ | |
1199 | uint32_t size; /* Number of bytes to hash */ | |
1200 | uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ | |
1201 | } __packed; | |
1202 | ||
1203 | struct ec_response_vboot_hash { | |
1204 | uint8_t status; /* enum ec_vboot_hash_status */ | |
1205 | uint8_t hash_type; /* enum ec_vboot_hash_type */ | |
1206 | uint8_t digest_size; /* Size of hash digest in bytes */ | |
1207 | uint8_t reserved0; /* Ignore; will be 0 */ | |
1208 | uint32_t offset; /* Offset in flash which was hashed */ | |
1209 | uint32_t size; /* Number of bytes hashed */ | |
1210 | uint8_t hash_digest[64]; /* Hash digest data */ | |
1211 | } __packed; | |
1212 | ||
1213 | enum ec_vboot_hash_cmd { | |
1214 | EC_VBOOT_HASH_GET = 0, /* Get current hash status */ | |
1215 | EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */ | |
1216 | EC_VBOOT_HASH_START = 2, /* Start computing a new hash */ | |
1217 | EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */ | |
1218 | }; | |
1219 | ||
1220 | enum ec_vboot_hash_type { | |
1221 | EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */ | |
1222 | }; | |
1223 | ||
1224 | enum ec_vboot_hash_status { | |
1225 | EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */ | |
1226 | EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */ | |
1227 | EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */ | |
1228 | }; | |
1229 | ||
1230 | /* | |
1231 | * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC. | |
1232 | * If one of these is specified, the EC will automatically update offset and | |
1233 | * size to the correct values for the specified image (RO or RW). | |
1234 | */ | |
1235 | #define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe | |
1236 | #define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd | |
1237 | ||
5271db29 BR |
1238 | /*****************************************************************************/ |
1239 | /* | |
1240 | * Motion sense commands. We'll make separate structs for sub-commands with | |
1241 | * different input args, so that we know how much to expect. | |
1242 | */ | |
1243 | #define EC_CMD_MOTION_SENSE_CMD 0x2B | |
1244 | ||
1245 | /* Motion sense commands */ | |
1246 | enum motionsense_command { | |
1247 | /* | |
1248 | * Dump command returns all motion sensor data including motion sense | |
1249 | * module flags and individual sensor flags. | |
1250 | */ | |
1251 | MOTIONSENSE_CMD_DUMP = 0, | |
1252 | ||
1253 | /* | |
1254 | * Info command returns data describing the details of a given sensor, | |
1255 | * including enum motionsensor_type, enum motionsensor_location, and | |
1256 | * enum motionsensor_chip. | |
1257 | */ | |
1258 | MOTIONSENSE_CMD_INFO = 1, | |
1259 | ||
1260 | /* | |
1261 | * EC Rate command is a setter/getter command for the EC sampling rate | |
1262 | * of all motion sensors in milliseconds. | |
1263 | */ | |
1264 | MOTIONSENSE_CMD_EC_RATE = 2, | |
1265 | ||
1266 | /* | |
1267 | * Sensor ODR command is a setter/getter command for the output data | |
1268 | * rate of a specific motion sensor in millihertz. | |
1269 | */ | |
1270 | MOTIONSENSE_CMD_SENSOR_ODR = 3, | |
1271 | ||
1272 | /* | |
1273 | * Sensor range command is a setter/getter command for the range of | |
1274 | * a specified motion sensor in +/-G's or +/- deg/s. | |
1275 | */ | |
1276 | MOTIONSENSE_CMD_SENSOR_RANGE = 4, | |
1277 | ||
1278 | /* | |
1279 | * Setter/getter command for the keyboard wake angle. When the lid | |
1280 | * angle is greater than this value, keyboard wake is disabled in S3, | |
1281 | * and when the lid angle goes less than this value, keyboard wake is | |
1282 | * enabled. Note, the lid angle measurement is an approximate, | |
1283 | * un-calibrated value, hence the wake angle isn't exact. | |
1284 | */ | |
1285 | MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, | |
1286 | ||
1287 | /* Number of motionsense sub-commands. */ | |
1288 | MOTIONSENSE_NUM_CMDS | |
1289 | }; | |
1290 | ||
1291 | enum motionsensor_id { | |
1292 | EC_MOTION_SENSOR_ACCEL_BASE = 0, | |
1293 | EC_MOTION_SENSOR_ACCEL_LID = 1, | |
1294 | EC_MOTION_SENSOR_GYRO = 2, | |
1295 | ||
1296 | /* | |
1297 | * Note, if more sensors are added and this count changes, the padding | |
1298 | * in ec_response_motion_sense dump command must be modified. | |
1299 | */ | |
1300 | EC_MOTION_SENSOR_COUNT = 3 | |
1301 | }; | |
1302 | ||
1303 | /* List of motion sensor types. */ | |
1304 | enum motionsensor_type { | |
1305 | MOTIONSENSE_TYPE_ACCEL = 0, | |
1306 | MOTIONSENSE_TYPE_GYRO = 1, | |
1307 | }; | |
1308 | ||
1309 | /* List of motion sensor locations. */ | |
1310 | enum motionsensor_location { | |
1311 | MOTIONSENSE_LOC_BASE = 0, | |
1312 | MOTIONSENSE_LOC_LID = 1, | |
1313 | }; | |
1314 | ||
1315 | /* List of motion sensor chips. */ | |
1316 | enum motionsensor_chip { | |
1317 | MOTIONSENSE_CHIP_KXCJ9 = 0, | |
1318 | }; | |
1319 | ||
1320 | /* Module flag masks used for the dump sub-command. */ | |
1321 | #define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) | |
1322 | ||
1323 | /* Sensor flag masks used for the dump sub-command. */ | |
1324 | #define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) | |
1325 | ||
1326 | /* | |
1327 | * Send this value for the data element to only perform a read. If you | |
1328 | * send any other value, the EC will interpret it as data to set and will | |
1329 | * return the actual value set. | |
1330 | */ | |
1331 | #define EC_MOTION_SENSE_NO_VALUE -1 | |
1332 | ||
1333 | struct ec_params_motion_sense { | |
1334 | uint8_t cmd; | |
1335 | union { | |
1336 | /* Used for MOTIONSENSE_CMD_DUMP. */ | |
1337 | struct { | |
1338 | /* no args */ | |
1339 | } dump; | |
1340 | ||
1341 | /* | |
1342 | * Used for MOTIONSENSE_CMD_EC_RATE and | |
1343 | * MOTIONSENSE_CMD_KB_WAKE_ANGLE. | |
1344 | */ | |
1345 | struct { | |
1346 | /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ | |
1347 | int16_t data; | |
1348 | } ec_rate, kb_wake_angle; | |
1349 | ||
1350 | /* Used for MOTIONSENSE_CMD_INFO. */ | |
1351 | struct { | |
1352 | /* Should be element of enum motionsensor_id. */ | |
1353 | uint8_t sensor_num; | |
1354 | } info; | |
1355 | ||
1356 | /* | |
1357 | * Used for MOTIONSENSE_CMD_SENSOR_ODR and | |
1358 | * MOTIONSENSE_CMD_SENSOR_RANGE. | |
1359 | */ | |
1360 | struct { | |
1361 | /* Should be element of enum motionsensor_id. */ | |
1362 | uint8_t sensor_num; | |
1363 | ||
1364 | /* Rounding flag, true for round-up, false for down. */ | |
1365 | uint8_t roundup; | |
1366 | ||
1367 | uint16_t reserved; | |
1368 | ||
1369 | /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ | |
1370 | int32_t data; | |
1371 | } sensor_odr, sensor_range; | |
1372 | }; | |
1373 | } __packed; | |
1374 | ||
1375 | struct ec_response_motion_sense { | |
1376 | union { | |
1377 | /* Used for MOTIONSENSE_CMD_DUMP. */ | |
1378 | struct { | |
1379 | /* Flags representing the motion sensor module. */ | |
1380 | uint8_t module_flags; | |
1381 | ||
1382 | /* Flags for each sensor in enum motionsensor_id. */ | |
1383 | uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT]; | |
1384 | ||
1385 | /* Array of all sensor data. Each sensor is 3-axis. */ | |
1386 | int16_t data[3*EC_MOTION_SENSOR_COUNT]; | |
1387 | } dump; | |
1388 | ||
1389 | /* Used for MOTIONSENSE_CMD_INFO. */ | |
1390 | struct { | |
1391 | /* Should be element of enum motionsensor_type. */ | |
1392 | uint8_t type; | |
1393 | ||
1394 | /* Should be element of enum motionsensor_location. */ | |
1395 | uint8_t location; | |
1396 | ||
1397 | /* Should be element of enum motionsensor_chip. */ | |
1398 | uint8_t chip; | |
1399 | } info; | |
1400 | ||
1401 | /* | |
1402 | * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, | |
1403 | * MOTIONSENSE_CMD_SENSOR_RANGE, and | |
1404 | * MOTIONSENSE_CMD_KB_WAKE_ANGLE. | |
1405 | */ | |
1406 | struct { | |
1407 | /* Current value of the parameter queried. */ | |
1408 | int32_t ret; | |
1409 | } ec_rate, sensor_odr, sensor_range, kb_wake_angle; | |
1410 | }; | |
1411 | } __packed; | |
1412 | ||
deaf39ef SG |
1413 | /*****************************************************************************/ |
1414 | /* USB charging control commands */ | |
1415 | ||
1416 | /* Set USB port charging mode */ | |
1417 | #define EC_CMD_USB_CHARGE_SET_MODE 0x30 | |
1418 | ||
1419 | struct ec_params_usb_charge_set_mode { | |
1420 | uint8_t usb_port_id; | |
1421 | uint8_t mode; | |
1422 | } __packed; | |
1423 | ||
1424 | /*****************************************************************************/ | |
1425 | /* Persistent storage for host */ | |
1426 | ||
1427 | /* Maximum bytes that can be read/written in a single command */ | |
1428 | #define EC_PSTORE_SIZE_MAX 64 | |
1429 | ||
1430 | /* Get persistent storage info */ | |
1431 | #define EC_CMD_PSTORE_INFO 0x40 | |
1432 | ||
1433 | struct ec_response_pstore_info { | |
1434 | /* Persistent storage size, in bytes */ | |
1435 | uint32_t pstore_size; | |
1436 | /* Access size; read/write offset and size must be a multiple of this */ | |
1437 | uint32_t access_size; | |
1438 | } __packed; | |
1439 | ||
1440 | /* | |
1441 | * Read persistent storage | |
1442 | * | |
1443 | * Response is params.size bytes of data. | |
1444 | */ | |
1445 | #define EC_CMD_PSTORE_READ 0x41 | |
1446 | ||
1447 | struct ec_params_pstore_read { | |
1448 | uint32_t offset; /* Byte offset to read */ | |
1449 | uint32_t size; /* Size to read in bytes */ | |
1450 | } __packed; | |
1451 | ||
1452 | /* Write persistent storage */ | |
1453 | #define EC_CMD_PSTORE_WRITE 0x42 | |
1454 | ||
1455 | struct ec_params_pstore_write { | |
1456 | uint32_t offset; /* Byte offset to write */ | |
1457 | uint32_t size; /* Size to write in bytes */ | |
1458 | uint8_t data[EC_PSTORE_SIZE_MAX]; | |
1459 | } __packed; | |
1460 | ||
1461 | /*****************************************************************************/ | |
1462 | /* Real-time clock */ | |
1463 | ||
1464 | /* RTC params and response structures */ | |
1465 | struct ec_params_rtc { | |
1466 | uint32_t time; | |
1467 | } __packed; | |
1468 | ||
1469 | struct ec_response_rtc { | |
1470 | uint32_t time; | |
1471 | } __packed; | |
1472 | ||
1473 | /* These use ec_response_rtc */ | |
1474 | #define EC_CMD_RTC_GET_VALUE 0x44 | |
1475 | #define EC_CMD_RTC_GET_ALARM 0x45 | |
1476 | ||
1477 | /* These all use ec_params_rtc */ | |
1478 | #define EC_CMD_RTC_SET_VALUE 0x46 | |
1479 | #define EC_CMD_RTC_SET_ALARM 0x47 | |
1480 | ||
1481 | /*****************************************************************************/ | |
1482 | /* Port80 log access */ | |
1483 | ||
256ab950 SB |
1484 | /* Maximum entries that can be read/written in a single command */ |
1485 | #define EC_PORT80_SIZE_MAX 32 | |
1486 | ||
deaf39ef SG |
1487 | /* Get last port80 code from previous boot */ |
1488 | #define EC_CMD_PORT80_LAST_BOOT 0x48 | |
256ab950 SB |
1489 | #define EC_CMD_PORT80_READ 0x48 |
1490 | ||
1491 | enum ec_port80_subcmd { | |
1492 | EC_PORT80_GET_INFO = 0, | |
1493 | EC_PORT80_READ_BUFFER, | |
1494 | }; | |
1495 | ||
1496 | struct ec_params_port80_read { | |
1497 | uint16_t subcmd; | |
1498 | union { | |
1499 | struct { | |
1500 | uint32_t offset; | |
1501 | uint32_t num_entries; | |
1502 | } read_buffer; | |
1503 | }; | |
1504 | } __packed; | |
1505 | ||
1506 | struct ec_response_port80_read { | |
1507 | union { | |
1508 | struct { | |
1509 | uint32_t writes; | |
1510 | uint32_t history_size; | |
1511 | uint32_t last_boot; | |
1512 | } get_info; | |
1513 | struct { | |
1514 | uint16_t codes[EC_PORT80_SIZE_MAX]; | |
1515 | } data; | |
1516 | }; | |
1517 | } __packed; | |
deaf39ef SG |
1518 | |
1519 | struct ec_response_port80_last_boot { | |
1520 | uint16_t code; | |
1521 | } __packed; | |
1522 | ||
1523 | /*****************************************************************************/ | |
5271db29 BR |
1524 | /* Thermal engine commands. Note that there are two implementations. We'll |
1525 | * reuse the command number, but the data and behavior is incompatible. | |
1526 | * Version 0 is what originally shipped on Link. | |
1527 | * Version 1 separates the CPU thermal limits from the fan control. | |
1528 | */ | |
deaf39ef | 1529 | |
deaf39ef | 1530 | #define EC_CMD_THERMAL_SET_THRESHOLD 0x50 |
5271db29 BR |
1531 | #define EC_CMD_THERMAL_GET_THRESHOLD 0x51 |
1532 | ||
1533 | /* The version 0 structs are opaque. You have to know what they are for | |
1534 | * the get/set commands to make any sense. | |
1535 | */ | |
deaf39ef | 1536 | |
5271db29 | 1537 | /* Version 0 - set */ |
deaf39ef SG |
1538 | struct ec_params_thermal_set_threshold { |
1539 | uint8_t sensor_type; | |
1540 | uint8_t threshold_id; | |
1541 | uint16_t value; | |
1542 | } __packed; | |
1543 | ||
5271db29 | 1544 | /* Version 0 - get */ |
deaf39ef SG |
1545 | struct ec_params_thermal_get_threshold { |
1546 | uint8_t sensor_type; | |
1547 | uint8_t threshold_id; | |
1548 | } __packed; | |
1549 | ||
1550 | struct ec_response_thermal_get_threshold { | |
1551 | uint16_t value; | |
1552 | } __packed; | |
1553 | ||
5271db29 BR |
1554 | |
1555 | /* The version 1 structs are visible. */ | |
1556 | enum ec_temp_thresholds { | |
1557 | EC_TEMP_THRESH_WARN = 0, | |
1558 | EC_TEMP_THRESH_HIGH, | |
1559 | EC_TEMP_THRESH_HALT, | |
1560 | ||
1561 | EC_TEMP_THRESH_COUNT | |
1562 | }; | |
1563 | ||
1564 | /* Thermal configuration for one temperature sensor. Temps are in degrees K. | |
1565 | * Zero values will be silently ignored by the thermal task. | |
1566 | */ | |
1567 | struct ec_thermal_config { | |
1568 | uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ | |
1569 | uint32_t temp_fan_off; /* no active cooling needed */ | |
1570 | uint32_t temp_fan_max; /* max active cooling needed */ | |
1571 | } __packed; | |
1572 | ||
1573 | /* Version 1 - get config for one sensor. */ | |
1574 | struct ec_params_thermal_get_threshold_v1 { | |
1575 | uint32_t sensor_num; | |
1576 | } __packed; | |
1577 | /* This returns a struct ec_thermal_config */ | |
1578 | ||
1579 | /* Version 1 - set config for one sensor. | |
1580 | * Use read-modify-write for best results! */ | |
1581 | struct ec_params_thermal_set_threshold_v1 { | |
1582 | uint32_t sensor_num; | |
1583 | struct ec_thermal_config cfg; | |
1584 | } __packed; | |
1585 | /* This returns no data */ | |
1586 | ||
1587 | /****************************************************************************/ | |
1588 | ||
deaf39ef SG |
1589 | /* Toggle automatic fan control */ |
1590 | #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52 | |
1591 | ||
1592 | /* Get TMP006 calibration data */ | |
1593 | #define EC_CMD_TMP006_GET_CALIBRATION 0x53 | |
1594 | ||
1595 | struct ec_params_tmp006_get_calibration { | |
1596 | uint8_t index; | |
1597 | } __packed; | |
1598 | ||
1599 | struct ec_response_tmp006_get_calibration { | |
1600 | float s0; | |
1601 | float b0; | |
1602 | float b1; | |
1603 | float b2; | |
1604 | } __packed; | |
1605 | ||
1606 | /* Set TMP006 calibration data */ | |
1607 | #define EC_CMD_TMP006_SET_CALIBRATION 0x54 | |
1608 | ||
1609 | struct ec_params_tmp006_set_calibration { | |
1610 | uint8_t index; | |
1611 | uint8_t reserved[3]; /* Reserved; set 0 */ | |
1612 | float s0; | |
1613 | float b0; | |
1614 | float b1; | |
1615 | float b2; | |
1616 | } __packed; | |
1617 | ||
5271db29 BR |
1618 | /* Read raw TMP006 data */ |
1619 | #define EC_CMD_TMP006_GET_RAW 0x55 | |
1620 | ||
1621 | struct ec_params_tmp006_get_raw { | |
1622 | uint8_t index; | |
1623 | } __packed; | |
1624 | ||
1625 | struct ec_response_tmp006_get_raw { | |
1626 | int32_t t; /* In 1/100 K */ | |
1627 | int32_t v; /* In nV */ | |
1628 | }; | |
1629 | ||
deaf39ef SG |
1630 | /*****************************************************************************/ |
1631 | /* MKBP - Matrix KeyBoard Protocol */ | |
1632 | ||
1633 | /* | |
1634 | * Read key state | |
1635 | * | |
1636 | * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for | |
1637 | * expected response size. | |
1638 | */ | |
1639 | #define EC_CMD_MKBP_STATE 0x60 | |
1640 | ||
1641 | /* Provide information about the matrix : number of rows and columns */ | |
1642 | #define EC_CMD_MKBP_INFO 0x61 | |
1643 | ||
1644 | struct ec_response_mkbp_info { | |
1645 | uint32_t rows; | |
1646 | uint32_t cols; | |
1647 | uint8_t switches; | |
1648 | } __packed; | |
1649 | ||
1650 | /* Simulate key press */ | |
1651 | #define EC_CMD_MKBP_SIMULATE_KEY 0x62 | |
1652 | ||
1653 | struct ec_params_mkbp_simulate_key { | |
1654 | uint8_t col; | |
1655 | uint8_t row; | |
1656 | uint8_t pressed; | |
1657 | } __packed; | |
1658 | ||
1659 | /* Configure keyboard scanning */ | |
1660 | #define EC_CMD_MKBP_SET_CONFIG 0x64 | |
1661 | #define EC_CMD_MKBP_GET_CONFIG 0x65 | |
1662 | ||
1663 | /* flags */ | |
1664 | enum mkbp_config_flags { | |
1665 | EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ | |
1666 | }; | |
1667 | ||
1668 | enum mkbp_config_valid { | |
1669 | EC_MKBP_VALID_SCAN_PERIOD = 1 << 0, | |
1670 | EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1, | |
1671 | EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3, | |
1672 | EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4, | |
1673 | EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5, | |
1674 | EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6, | |
1675 | EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7, | |
1676 | }; | |
1677 | ||
1678 | /* Configuration for our key scanning algorithm */ | |
1679 | struct ec_mkbp_config { | |
1680 | uint32_t valid_mask; /* valid fields */ | |
1681 | uint8_t flags; /* some flags (enum mkbp_config_flags) */ | |
1682 | uint8_t valid_flags; /* which flags are valid */ | |
1683 | uint16_t scan_period_us; /* period between start of scans */ | |
1684 | /* revert to interrupt mode after no activity for this long */ | |
1685 | uint32_t poll_timeout_us; | |
1686 | /* | |
1687 | * minimum post-scan relax time. Once we finish a scan we check | |
1688 | * the time until we are due to start the next one. If this time is | |
1689 | * shorter this field, we use this instead. | |
1690 | */ | |
1691 | uint16_t min_post_scan_delay_us; | |
1692 | /* delay between setting up output and waiting for it to settle */ | |
1693 | uint16_t output_settle_us; | |
1694 | uint16_t debounce_down_us; /* time for debounce on key down */ | |
1695 | uint16_t debounce_up_us; /* time for debounce on key up */ | |
1696 | /* maximum depth to allow for fifo (0 = no keyscan output) */ | |
1697 | uint8_t fifo_max_depth; | |
1698 | } __packed; | |
1699 | ||
1700 | struct ec_params_mkbp_set_config { | |
1701 | struct ec_mkbp_config config; | |
1702 | } __packed; | |
1703 | ||
1704 | struct ec_response_mkbp_get_config { | |
1705 | struct ec_mkbp_config config; | |
1706 | } __packed; | |
1707 | ||
1708 | /* Run the key scan emulation */ | |
1709 | #define EC_CMD_KEYSCAN_SEQ_CTRL 0x66 | |
1710 | ||
1711 | enum ec_keyscan_seq_cmd { | |
1712 | EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ | |
1713 | EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ | |
1714 | EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ | |
1715 | EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ | |
1716 | EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ | |
1717 | }; | |
1718 | ||
1719 | enum ec_collect_flags { | |
1720 | /* | |
1721 | * Indicates this scan was processed by the EC. Due to timing, some | |
1722 | * scans may be skipped. | |
1723 | */ | |
1724 | EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0, | |
1725 | }; | |
1726 | ||
1727 | struct ec_collect_item { | |
1728 | uint8_t flags; /* some flags (enum ec_collect_flags) */ | |
1729 | }; | |
1730 | ||
1731 | struct ec_params_keyscan_seq_ctrl { | |
1732 | uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ | |
1733 | union { | |
1734 | struct { | |
1735 | uint8_t active; /* still active */ | |
1736 | uint8_t num_items; /* number of items */ | |
1737 | /* Current item being presented */ | |
1738 | uint8_t cur_item; | |
1739 | } status; | |
1740 | struct { | |
1741 | /* | |
1742 | * Absolute time for this scan, measured from the | |
1743 | * start of the sequence. | |
1744 | */ | |
1745 | uint32_t time_us; | |
1746 | uint8_t scan[0]; /* keyscan data */ | |
1747 | } add; | |
1748 | struct { | |
1749 | uint8_t start_item; /* First item to return */ | |
1750 | uint8_t num_items; /* Number of items to return */ | |
1751 | } collect; | |
1752 | }; | |
1753 | } __packed; | |
1754 | ||
1755 | struct ec_result_keyscan_seq_ctrl { | |
1756 | union { | |
1757 | struct { | |
1758 | uint8_t num_items; /* Number of items */ | |
1759 | /* Data for each item */ | |
1760 | struct ec_collect_item item[0]; | |
1761 | } collect; | |
1762 | }; | |
1763 | } __packed; | |
1764 | ||
1765 | /*****************************************************************************/ | |
1766 | /* Temperature sensor commands */ | |
1767 | ||
1768 | /* Read temperature sensor info */ | |
1769 | #define EC_CMD_TEMP_SENSOR_GET_INFO 0x70 | |
1770 | ||
1771 | struct ec_params_temp_sensor_get_info { | |
1772 | uint8_t id; | |
1773 | } __packed; | |
1774 | ||
1775 | struct ec_response_temp_sensor_get_info { | |
1776 | char sensor_name[32]; | |
1777 | uint8_t sensor_type; | |
1778 | } __packed; | |
1779 | ||
1780 | /*****************************************************************************/ | |
1781 | ||
1782 | /* | |
1783 | * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI | |
1784 | * commands accidentally sent to the wrong interface. See the ACPI section | |
1785 | * below. | |
1786 | */ | |
1787 | ||
1788 | /*****************************************************************************/ | |
1789 | /* Host event commands */ | |
1790 | ||
1791 | /* | |
1792 | * Host event mask params and response structures, shared by all of the host | |
1793 | * event commands below. | |
1794 | */ | |
1795 | struct ec_params_host_event_mask { | |
1796 | uint32_t mask; | |
1797 | } __packed; | |
1798 | ||
1799 | struct ec_response_host_event_mask { | |
1800 | uint32_t mask; | |
1801 | } __packed; | |
1802 | ||
1803 | /* These all use ec_response_host_event_mask */ | |
1804 | #define EC_CMD_HOST_EVENT_GET_B 0x87 | |
1805 | #define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88 | |
1806 | #define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89 | |
1807 | #define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d | |
1808 | ||
1809 | /* These all use ec_params_host_event_mask */ | |
1810 | #define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a | |
1811 | #define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b | |
1812 | #define EC_CMD_HOST_EVENT_CLEAR 0x8c | |
1813 | #define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e | |
1814 | #define EC_CMD_HOST_EVENT_CLEAR_B 0x8f | |
1815 | ||
1816 | /*****************************************************************************/ | |
1817 | /* Switch commands */ | |
1818 | ||
1819 | /* Enable/disable LCD backlight */ | |
1820 | #define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90 | |
1821 | ||
1822 | struct ec_params_switch_enable_backlight { | |
1823 | uint8_t enabled; | |
1824 | } __packed; | |
1825 | ||
1826 | /* Enable/disable WLAN/Bluetooth */ | |
1827 | #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 | |
5271db29 | 1828 | #define EC_VER_SWITCH_ENABLE_WIRELESS 1 |
deaf39ef | 1829 | |
5271db29 BR |
1830 | /* Version 0 params; no response */ |
1831 | struct ec_params_switch_enable_wireless_v0 { | |
deaf39ef SG |
1832 | uint8_t enabled; |
1833 | } __packed; | |
1834 | ||
5271db29 BR |
1835 | /* Version 1 params */ |
1836 | struct ec_params_switch_enable_wireless_v1 { | |
1837 | /* Flags to enable now */ | |
1838 | uint8_t now_flags; | |
1839 | ||
1840 | /* Which flags to copy from now_flags */ | |
1841 | uint8_t now_mask; | |
1842 | ||
1843 | /* | |
1844 | * Flags to leave enabled in S3, if they're on at the S0->S3 | |
1845 | * transition. (Other flags will be disabled by the S0->S3 | |
1846 | * transition.) | |
1847 | */ | |
1848 | uint8_t suspend_flags; | |
1849 | ||
1850 | /* Which flags to copy from suspend_flags */ | |
1851 | uint8_t suspend_mask; | |
1852 | } __packed; | |
1853 | ||
1854 | /* Version 1 response */ | |
1855 | struct ec_response_switch_enable_wireless_v1 { | |
1856 | /* Flags to enable now */ | |
1857 | uint8_t now_flags; | |
1858 | ||
1859 | /* Flags to leave enabled in S3 */ | |
1860 | uint8_t suspend_flags; | |
1861 | } __packed; | |
1862 | ||
deaf39ef SG |
1863 | /*****************************************************************************/ |
1864 | /* GPIO commands. Only available on EC if write protect has been disabled. */ | |
1865 | ||
1866 | /* Set GPIO output value */ | |
1867 | #define EC_CMD_GPIO_SET 0x92 | |
1868 | ||
1869 | struct ec_params_gpio_set { | |
1870 | char name[32]; | |
1871 | uint8_t val; | |
1872 | } __packed; | |
1873 | ||
1874 | /* Get GPIO value */ | |
1875 | #define EC_CMD_GPIO_GET 0x93 | |
1876 | ||
256ab950 | 1877 | /* Version 0 of input params and response */ |
deaf39ef SG |
1878 | struct ec_params_gpio_get { |
1879 | char name[32]; | |
1880 | } __packed; | |
1881 | struct ec_response_gpio_get { | |
1882 | uint8_t val; | |
1883 | } __packed; | |
1884 | ||
256ab950 SB |
1885 | /* Version 1 of input params and response */ |
1886 | struct ec_params_gpio_get_v1 { | |
1887 | uint8_t subcmd; | |
1888 | union { | |
1889 | struct { | |
1890 | char name[32]; | |
1891 | } get_value_by_name; | |
1892 | struct { | |
1893 | uint8_t index; | |
1894 | } get_info; | |
1895 | }; | |
1896 | } __packed; | |
1897 | ||
1898 | struct ec_response_gpio_get_v1 { | |
1899 | union { | |
1900 | struct { | |
1901 | uint8_t val; | |
1902 | } get_value_by_name, get_count; | |
1903 | struct { | |
1904 | uint8_t val; | |
1905 | char name[32]; | |
1906 | uint32_t flags; | |
1907 | } get_info; | |
1908 | }; | |
1909 | } __packed; | |
1910 | ||
1911 | enum gpio_get_subcmd { | |
1912 | EC_GPIO_GET_BY_NAME = 0, | |
1913 | EC_GPIO_GET_COUNT = 1, | |
1914 | EC_GPIO_GET_INFO = 2, | |
1915 | }; | |
1916 | ||
deaf39ef SG |
1917 | /*****************************************************************************/ |
1918 | /* I2C commands. Only available when flash write protect is unlocked. */ | |
1919 | ||
5271db29 BR |
1920 | /* |
1921 | * TODO(crosbug.com/p/23570): These commands are deprecated, and will be | |
1922 | * removed soon. Use EC_CMD_I2C_XFER instead. | |
1923 | */ | |
1924 | ||
deaf39ef SG |
1925 | /* Read I2C bus */ |
1926 | #define EC_CMD_I2C_READ 0x94 | |
1927 | ||
1928 | struct ec_params_i2c_read { | |
5271db29 | 1929 | uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ |
deaf39ef SG |
1930 | uint8_t read_size; /* Either 8 or 16. */ |
1931 | uint8_t port; | |
1932 | uint8_t offset; | |
1933 | } __packed; | |
1934 | struct ec_response_i2c_read { | |
1935 | uint16_t data; | |
1936 | } __packed; | |
1937 | ||
1938 | /* Write I2C bus */ | |
1939 | #define EC_CMD_I2C_WRITE 0x95 | |
1940 | ||
1941 | struct ec_params_i2c_write { | |
1942 | uint16_t data; | |
5271db29 | 1943 | uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ |
deaf39ef SG |
1944 | uint8_t write_size; /* Either 8 or 16. */ |
1945 | uint8_t port; | |
1946 | uint8_t offset; | |
1947 | } __packed; | |
1948 | ||
1949 | /*****************************************************************************/ | |
1950 | /* Charge state commands. Only available when flash write protect unlocked. */ | |
1951 | ||
5271db29 BR |
1952 | /* Force charge state machine to stop charging the battery or force it to |
1953 | * discharge the battery. | |
1954 | */ | |
1955 | #define EC_CMD_CHARGE_CONTROL 0x96 | |
1956 | #define EC_VER_CHARGE_CONTROL 1 | |
deaf39ef | 1957 | |
5271db29 BR |
1958 | enum ec_charge_control_mode { |
1959 | CHARGE_CONTROL_NORMAL = 0, | |
1960 | CHARGE_CONTROL_IDLE, | |
1961 | CHARGE_CONTROL_DISCHARGE, | |
1962 | }; | |
1963 | ||
1964 | struct ec_params_charge_control { | |
1965 | uint32_t mode; /* enum charge_control_mode */ | |
deaf39ef SG |
1966 | } __packed; |
1967 | ||
1968 | /*****************************************************************************/ | |
1969 | /* Console commands. Only available when flash write protect is unlocked. */ | |
1970 | ||
1971 | /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ | |
1972 | #define EC_CMD_CONSOLE_SNAPSHOT 0x97 | |
1973 | ||
1974 | /* | |
1975 | * Read next chunk of data from saved snapshot. | |
1976 | * | |
1977 | * Response is null-terminated string. Empty string, if there is no more | |
1978 | * remaining output. | |
1979 | */ | |
1980 | #define EC_CMD_CONSOLE_READ 0x98 | |
1981 | ||
1982 | /*****************************************************************************/ | |
1983 | ||
1984 | /* | |
256ab950 | 1985 | * Cut off battery power immediately or after the host has shut down. |
deaf39ef | 1986 | * |
256ab950 SB |
1987 | * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. |
1988 | * EC_RES_SUCCESS if the command was successful. | |
1989 | * EC_RES_ERROR if the cut off command failed. | |
deaf39ef | 1990 | */ |
256ab950 | 1991 | |
deaf39ef SG |
1992 | #define EC_CMD_BATTERY_CUT_OFF 0x99 |
1993 | ||
256ab950 SB |
1994 | #define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) |
1995 | ||
1996 | struct ec_params_battery_cutoff { | |
1997 | uint8_t flags; | |
1998 | } __packed; | |
1999 | ||
deaf39ef | 2000 | /*****************************************************************************/ |
5271db29 | 2001 | /* USB port mux control. */ |
deaf39ef SG |
2002 | |
2003 | /* | |
5271db29 BR |
2004 | * Switch USB mux or return to automatic switching. |
2005 | */ | |
2006 | #define EC_CMD_USB_MUX 0x9a | |
2007 | ||
2008 | struct ec_params_usb_mux { | |
2009 | uint8_t mux; | |
2010 | } __packed; | |
2011 | ||
2012 | /*****************************************************************************/ | |
2013 | /* LDOs / FETs control. */ | |
2014 | ||
2015 | enum ec_ldo_state { | |
2016 | EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ | |
2017 | EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ | |
2018 | }; | |
2019 | ||
2020 | /* | |
2021 | * Switch on/off a LDO. | |
2022 | */ | |
2023 | #define EC_CMD_LDO_SET 0x9b | |
2024 | ||
2025 | struct ec_params_ldo_set { | |
2026 | uint8_t index; | |
2027 | uint8_t state; | |
2028 | } __packed; | |
2029 | ||
2030 | /* | |
2031 | * Get LDO state. | |
2032 | */ | |
2033 | #define EC_CMD_LDO_GET 0x9c | |
2034 | ||
2035 | struct ec_params_ldo_get { | |
2036 | uint8_t index; | |
2037 | } __packed; | |
2038 | ||
2039 | struct ec_response_ldo_get { | |
2040 | uint8_t state; | |
2041 | } __packed; | |
2042 | ||
2043 | /*****************************************************************************/ | |
2044 | /* Power info. */ | |
2045 | ||
2046 | /* | |
2047 | * Get power info. | |
2048 | */ | |
2049 | #define EC_CMD_POWER_INFO 0x9d | |
2050 | ||
2051 | struct ec_response_power_info { | |
2052 | uint32_t usb_dev_type; | |
2053 | uint16_t voltage_ac; | |
2054 | uint16_t voltage_system; | |
2055 | uint16_t current_system; | |
2056 | uint16_t usb_current_limit; | |
2057 | } __packed; | |
2058 | ||
2059 | /*****************************************************************************/ | |
2060 | /* I2C passthru command */ | |
2061 | ||
2062 | #define EC_CMD_I2C_PASSTHRU 0x9e | |
2063 | ||
5271db29 BR |
2064 | /* Read data; if not present, message is a write */ |
2065 | #define EC_I2C_FLAG_READ (1 << 15) | |
2066 | ||
2067 | /* Mask for address */ | |
2068 | #define EC_I2C_ADDR_MASK 0x3ff | |
2069 | ||
2070 | #define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */ | |
2071 | #define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */ | |
2072 | ||
2073 | /* Any error */ | |
2074 | #define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) | |
2075 | ||
2076 | struct ec_params_i2c_passthru_msg { | |
2077 | uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ | |
2078 | uint16_t len; /* Number of bytes to read or write */ | |
2079 | } __packed; | |
2080 | ||
2081 | struct ec_params_i2c_passthru { | |
2082 | uint8_t port; /* I2C port number */ | |
2083 | uint8_t num_msgs; /* Number of messages */ | |
2084 | struct ec_params_i2c_passthru_msg msg[]; | |
2085 | /* Data to write for all messages is concatenated here */ | |
2086 | } __packed; | |
2087 | ||
2088 | struct ec_response_i2c_passthru { | |
2089 | uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ | |
2090 | uint8_t num_msgs; /* Number of messages processed */ | |
2091 | uint8_t data[]; /* Data read by messages concatenated here */ | |
2092 | } __packed; | |
2093 | ||
2094 | /*****************************************************************************/ | |
2095 | /* Power button hang detect */ | |
2096 | ||
2097 | #define EC_CMD_HANG_DETECT 0x9f | |
2098 | ||
2099 | /* Reasons to start hang detection timer */ | |
2100 | /* Power button pressed */ | |
2101 | #define EC_HANG_START_ON_POWER_PRESS (1 << 0) | |
2102 | ||
2103 | /* Lid closed */ | |
2104 | #define EC_HANG_START_ON_LID_CLOSE (1 << 1) | |
2105 | ||
2106 | /* Lid opened */ | |
2107 | #define EC_HANG_START_ON_LID_OPEN (1 << 2) | |
2108 | ||
2109 | /* Start of AP S3->S0 transition (booting or resuming from suspend) */ | |
2110 | #define EC_HANG_START_ON_RESUME (1 << 3) | |
2111 | ||
2112 | /* Reasons to cancel hang detection */ | |
2113 | ||
2114 | /* Power button released */ | |
2115 | #define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) | |
2116 | ||
2117 | /* Any host command from AP received */ | |
2118 | #define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) | |
2119 | ||
2120 | /* Stop on end of AP S0->S3 transition (suspending or shutting down) */ | |
2121 | #define EC_HANG_STOP_ON_SUSPEND (1 << 10) | |
2122 | ||
2123 | /* | |
2124 | * If this flag is set, all the other fields are ignored, and the hang detect | |
2125 | * timer is started. This provides the AP a way to start the hang timer | |
2126 | * without reconfiguring any of the other hang detect settings. Note that | |
2127 | * you must previously have configured the timeouts. | |
2128 | */ | |
2129 | #define EC_HANG_START_NOW (1 << 30) | |
2130 | ||
2131 | /* | |
2132 | * If this flag is set, all the other fields are ignored (including | |
2133 | * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer | |
2134 | * without reconfiguring any of the other hang detect settings. | |
deaf39ef | 2135 | */ |
5271db29 BR |
2136 | #define EC_HANG_STOP_NOW (1 << 31) |
2137 | ||
2138 | struct ec_params_hang_detect { | |
2139 | /* Flags; see EC_HANG_* */ | |
2140 | uint32_t flags; | |
2141 | ||
2142 | /* Timeout in msec before generating host event, if enabled */ | |
2143 | uint16_t host_event_timeout_msec; | |
2144 | ||
2145 | /* Timeout in msec before generating warm reboot, if enabled */ | |
2146 | uint16_t warm_reboot_timeout_msec; | |
2147 | } __packed; | |
2148 | ||
2149 | /*****************************************************************************/ | |
2150 | /* Commands for battery charging */ | |
2151 | ||
2152 | /* | |
2153 | * This is the single catch-all host command to exchange data regarding the | |
2154 | * charge state machine (v2 and up). | |
2155 | */ | |
2156 | #define EC_CMD_CHARGE_STATE 0xa0 | |
2157 | ||
2158 | /* Subcommands for this host command */ | |
2159 | enum charge_state_command { | |
2160 | CHARGE_STATE_CMD_GET_STATE, | |
2161 | CHARGE_STATE_CMD_GET_PARAM, | |
2162 | CHARGE_STATE_CMD_SET_PARAM, | |
2163 | CHARGE_STATE_NUM_CMDS | |
2164 | }; | |
2165 | ||
2166 | /* | |
2167 | * Known param numbers are defined here. Ranges are reserved for board-specific | |
2168 | * params, which are handled by the particular implementations. | |
2169 | */ | |
2170 | enum charge_state_params { | |
2171 | CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ | |
2172 | CS_PARAM_CHG_CURRENT, /* charger current limit */ | |
2173 | CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ | |
2174 | CS_PARAM_CHG_STATUS, /* charger-specific status */ | |
2175 | CS_PARAM_CHG_OPTION, /* charger-specific options */ | |
2176 | /* How many so far? */ | |
2177 | CS_NUM_BASE_PARAMS, | |
2178 | ||
2179 | /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ | |
2180 | CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, | |
2181 | CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, | |
2182 | ||
2183 | /* Other custom param ranges go here... */ | |
2184 | }; | |
2185 | ||
2186 | struct ec_params_charge_state { | |
2187 | uint8_t cmd; /* enum charge_state_command */ | |
2188 | union { | |
2189 | struct { | |
2190 | /* no args */ | |
2191 | } get_state; | |
2192 | ||
2193 | struct { | |
2194 | uint32_t param; /* enum charge_state_param */ | |
2195 | } get_param; | |
2196 | ||
2197 | struct { | |
2198 | uint32_t param; /* param to set */ | |
2199 | uint32_t value; /* value to set */ | |
2200 | } set_param; | |
2201 | }; | |
2202 | } __packed; | |
2203 | ||
2204 | struct ec_response_charge_state { | |
2205 | union { | |
2206 | struct { | |
2207 | int ac; | |
2208 | int chg_voltage; | |
2209 | int chg_current; | |
2210 | int chg_input_current; | |
2211 | int batt_state_of_charge; | |
2212 | } get_state; | |
2213 | ||
2214 | struct { | |
2215 | uint32_t value; | |
2216 | } get_param; | |
2217 | struct { | |
2218 | /* no return values */ | |
2219 | } set_param; | |
2220 | }; | |
2221 | } __packed; | |
2222 | ||
deaf39ef SG |
2223 | |
2224 | /* | |
2225 | * Set maximum battery charging current. | |
2226 | */ | |
2227 | #define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1 | |
2228 | ||
2229 | struct ec_params_current_limit { | |
5271db29 BR |
2230 | uint32_t limit; /* in mA */ |
2231 | } __packed; | |
2232 | ||
2233 | /* | |
2234 | * Set maximum external power current. | |
2235 | */ | |
2236 | #define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 | |
2237 | ||
2238 | struct ec_params_ext_power_current_limit { | |
2239 | uint32_t limit; /* in mA */ | |
2240 | } __packed; | |
2241 | ||
2242 | /*****************************************************************************/ | |
2243 | /* Smart battery pass-through */ | |
2244 | ||
2245 | /* Get / Set 16-bit smart battery registers */ | |
2246 | #define EC_CMD_SB_READ_WORD 0xb0 | |
2247 | #define EC_CMD_SB_WRITE_WORD 0xb1 | |
2248 | ||
2249 | /* Get / Set string smart battery parameters | |
2250 | * formatted as SMBUS "block". | |
2251 | */ | |
2252 | #define EC_CMD_SB_READ_BLOCK 0xb2 | |
2253 | #define EC_CMD_SB_WRITE_BLOCK 0xb3 | |
2254 | ||
2255 | struct ec_params_sb_rd { | |
2256 | uint8_t reg; | |
2257 | } __packed; | |
2258 | ||
2259 | struct ec_response_sb_rd_word { | |
2260 | uint16_t value; | |
2261 | } __packed; | |
2262 | ||
2263 | struct ec_params_sb_wr_word { | |
2264 | uint8_t reg; | |
2265 | uint16_t value; | |
2266 | } __packed; | |
2267 | ||
2268 | struct ec_response_sb_rd_block { | |
2269 | uint8_t data[32]; | |
2270 | } __packed; | |
2271 | ||
2272 | struct ec_params_sb_wr_block { | |
2273 | uint8_t reg; | |
2274 | uint16_t data[32]; | |
deaf39ef SG |
2275 | } __packed; |
2276 | ||
256ab950 SB |
2277 | /*****************************************************************************/ |
2278 | /* Battery vendor parameters | |
2279 | * | |
2280 | * Get or set vendor-specific parameters in the battery. Implementations may | |
2281 | * differ between boards or batteries. On a set operation, the response | |
2282 | * contains the actual value set, which may be rounded or clipped from the | |
2283 | * requested value. | |
2284 | */ | |
2285 | ||
2286 | #define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 | |
2287 | ||
2288 | enum ec_battery_vendor_param_mode { | |
2289 | BATTERY_VENDOR_PARAM_MODE_GET = 0, | |
2290 | BATTERY_VENDOR_PARAM_MODE_SET, | |
2291 | }; | |
2292 | ||
2293 | struct ec_params_battery_vendor_param { | |
2294 | uint32_t param; | |
2295 | uint32_t value; | |
2296 | uint8_t mode; | |
2297 | } __packed; | |
2298 | ||
2299 | struct ec_response_battery_vendor_param { | |
2300 | uint32_t value; | |
2301 | } __packed; | |
2302 | ||
deaf39ef SG |
2303 | /*****************************************************************************/ |
2304 | /* System commands */ | |
2305 | ||
2306 | /* | |
5271db29 BR |
2307 | * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't |
2308 | * necessarily reboot the EC. Rename to "image" or something similar? | |
deaf39ef SG |
2309 | */ |
2310 | #define EC_CMD_REBOOT_EC 0xd2 | |
2311 | ||
2312 | /* Command */ | |
2313 | enum ec_reboot_cmd { | |
2314 | EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ | |
2315 | EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ | |
2316 | EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */ | |
2317 | /* (command 3 was jump to RW-B) */ | |
2318 | EC_REBOOT_COLD = 4, /* Cold-reboot */ | |
2319 | EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ | |
2320 | EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */ | |
2321 | }; | |
2322 | ||
2323 | /* Flags for ec_params_reboot_ec.reboot_flags */ | |
2324 | #define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */ | |
2325 | #define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */ | |
2326 | ||
2327 | struct ec_params_reboot_ec { | |
2328 | uint8_t cmd; /* enum ec_reboot_cmd */ | |
2329 | uint8_t flags; /* See EC_REBOOT_FLAG_* */ | |
2330 | } __packed; | |
2331 | ||
2332 | /* | |
2333 | * Get information on last EC panic. | |
2334 | * | |
2335 | * Returns variable-length platform-dependent panic information. See panic.h | |
2336 | * for details. | |
2337 | */ | |
2338 | #define EC_CMD_GET_PANIC_INFO 0xd3 | |
2339 | ||
2340 | /*****************************************************************************/ | |
2341 | /* | |
2342 | * ACPI commands | |
2343 | * | |
2344 | * These are valid ONLY on the ACPI command/data port. | |
2345 | */ | |
2346 | ||
2347 | /* | |
2348 | * ACPI Read Embedded Controller | |
2349 | * | |
2350 | * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). | |
2351 | * | |
2352 | * Use the following sequence: | |
2353 | * | |
2354 | * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD | |
2355 | * - Wait for EC_LPC_CMDR_PENDING bit to clear | |
2356 | * - Write address to EC_LPC_ADDR_ACPI_DATA | |
2357 | * - Wait for EC_LPC_CMDR_DATA bit to set | |
2358 | * - Read value from EC_LPC_ADDR_ACPI_DATA | |
2359 | */ | |
2360 | #define EC_CMD_ACPI_READ 0x80 | |
2361 | ||
2362 | /* | |
2363 | * ACPI Write Embedded Controller | |
2364 | * | |
2365 | * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). | |
2366 | * | |
2367 | * Use the following sequence: | |
2368 | * | |
2369 | * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD | |
2370 | * - Wait for EC_LPC_CMDR_PENDING bit to clear | |
2371 | * - Write address to EC_LPC_ADDR_ACPI_DATA | |
2372 | * - Wait for EC_LPC_CMDR_PENDING bit to clear | |
2373 | * - Write value to EC_LPC_ADDR_ACPI_DATA | |
2374 | */ | |
2375 | #define EC_CMD_ACPI_WRITE 0x81 | |
2376 | ||
2377 | /* | |
2378 | * ACPI Query Embedded Controller | |
2379 | * | |
2380 | * This clears the lowest-order bit in the currently pending host events, and | |
2381 | * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, | |
2382 | * event 0x80000000 = 32), or 0 if no event was pending. | |
2383 | */ | |
2384 | #define EC_CMD_ACPI_QUERY_EVENT 0x84 | |
2385 | ||
2386 | /* Valid addresses in ACPI memory space, for read/write commands */ | |
5271db29 | 2387 | |
deaf39ef SG |
2388 | /* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ |
2389 | #define EC_ACPI_MEM_VERSION 0x00 | |
2390 | /* | |
2391 | * Test location; writing value here updates test compliment byte to (0xff - | |
2392 | * value). | |
2393 | */ | |
2394 | #define EC_ACPI_MEM_TEST 0x01 | |
2395 | /* Test compliment; writes here are ignored. */ | |
2396 | #define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 | |
5271db29 | 2397 | |
deaf39ef SG |
2398 | /* Keyboard backlight brightness percent (0 - 100) */ |
2399 | #define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 | |
5271db29 BR |
2400 | /* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ |
2401 | #define EC_ACPI_MEM_FAN_DUTY 0x04 | |
2402 | ||
2403 | /* | |
2404 | * DPTF temp thresholds. Any of the EC's temp sensors can have up to two | |
2405 | * independent thresholds attached to them. The current value of the ID | |
2406 | * register determines which sensor is affected by the THRESHOLD and COMMIT | |
2407 | * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme | |
2408 | * as the memory-mapped sensors. The COMMIT register applies those settings. | |
2409 | * | |
2410 | * The spec does not mandate any way to read back the threshold settings | |
2411 | * themselves, but when a threshold is crossed the AP needs a way to determine | |
2412 | * which sensor(s) are responsible. Each reading of the ID register clears and | |
2413 | * returns one sensor ID that has crossed one of its threshold (in either | |
2414 | * direction) since the last read. A value of 0xFF means "no new thresholds | |
2415 | * have tripped". Setting or enabling the thresholds for a sensor will clear | |
2416 | * the unread event count for that sensor. | |
2417 | */ | |
2418 | #define EC_ACPI_MEM_TEMP_ID 0x05 | |
2419 | #define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 | |
2420 | #define EC_ACPI_MEM_TEMP_COMMIT 0x07 | |
2421 | /* | |
2422 | * Here are the bits for the COMMIT register: | |
2423 | * bit 0 selects the threshold index for the chosen sensor (0/1) | |
2424 | * bit 1 enables/disables the selected threshold (0 = off, 1 = on) | |
2425 | * Each write to the commit register affects one threshold. | |
2426 | */ | |
2427 | #define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0) | |
2428 | #define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1) | |
2429 | /* | |
2430 | * Example: | |
2431 | * | |
2432 | * Set the thresholds for sensor 2 to 50 C and 60 C: | |
2433 | * write 2 to [0x05] -- select temp sensor 2 | |
2434 | * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET | |
2435 | * write 0x2 to [0x07] -- enable threshold 0 with this value | |
2436 | * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET | |
2437 | * write 0x3 to [0x07] -- enable threshold 1 with this value | |
2438 | * | |
2439 | * Disable the 60 C threshold, leaving the 50 C threshold unchanged: | |
2440 | * write 2 to [0x05] -- select temp sensor 2 | |
2441 | * write 0x1 to [0x07] -- disable threshold 1 | |
2442 | */ | |
2443 | ||
2444 | /* DPTF battery charging current limit */ | |
2445 | #define EC_ACPI_MEM_CHARGING_LIMIT 0x08 | |
2446 | ||
2447 | /* Charging limit is specified in 64 mA steps */ | |
2448 | #define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 | |
2449 | /* Value to disable DPTF battery charging limit */ | |
2450 | #define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff | |
deaf39ef SG |
2451 | |
2452 | /* Current version of ACPI memory address space */ | |
2453 | #define EC_ACPI_MEM_VERSION_CURRENT 1 | |
2454 | ||
2455 | ||
2456 | /*****************************************************************************/ | |
2457 | /* | |
2458 | * Special commands | |
2459 | * | |
2460 | * These do not follow the normal rules for commands. See each command for | |
2461 | * details. | |
2462 | */ | |
2463 | ||
2464 | /* | |
2465 | * Reboot NOW | |
2466 | * | |
2467 | * This command will work even when the EC LPC interface is busy, because the | |
2468 | * reboot command is processed at interrupt level. Note that when the EC | |
2469 | * reboots, the host will reboot too, so there is no response to this command. | |
2470 | * | |
2471 | * Use EC_CMD_REBOOT_EC to reboot the EC more politely. | |
2472 | */ | |
2473 | #define EC_CMD_REBOOT 0xd1 /* Think "die" */ | |
2474 | ||
2475 | /* | |
2476 | * Resend last response (not supported on LPC). | |
2477 | * | |
2478 | * Returns EC_RES_UNAVAILABLE if there is no response available - for example, | |
2479 | * there was no previous command, or the previous command's response was too | |
2480 | * big to save. | |
2481 | */ | |
2482 | #define EC_CMD_RESEND_RESPONSE 0xdb | |
2483 | ||
2484 | /* | |
2485 | * This header byte on a command indicate version 0. Any header byte less | |
2486 | * than this means that we are talking to an old EC which doesn't support | |
2487 | * versioning. In that case, we assume version 0. | |
2488 | * | |
2489 | * Header bytes greater than this indicate a later version. For example, | |
2490 | * EC_CMD_VERSION0 + 1 means we are using version 1. | |
2491 | * | |
5271db29 | 2492 | * The old EC interface must not use commands 0xdc or higher. |
deaf39ef SG |
2493 | */ |
2494 | #define EC_CMD_VERSION0 0xdc | |
2495 | ||
2496 | #endif /* !__ACPI__ */ | |
2497 | ||
256ab950 SB |
2498 | /*****************************************************************************/ |
2499 | /* | |
2500 | * PD commands | |
2501 | * | |
2502 | * These commands are for PD MCU communication. | |
2503 | */ | |
2504 | ||
2505 | /* EC to PD MCU exchange status command */ | |
2506 | #define EC_CMD_PD_EXCHANGE_STATUS 0x100 | |
2507 | ||
2508 | /* Status of EC being sent to PD */ | |
2509 | struct ec_params_pd_status { | |
2510 | int8_t batt_soc; /* battery state of charge */ | |
2511 | } __packed; | |
2512 | ||
2513 | /* Status of PD being sent back to EC */ | |
2514 | struct ec_response_pd_status { | |
2515 | int8_t status; /* PD MCU status */ | |
2516 | uint32_t curr_lim_ma; /* input current limit */ | |
2517 | } __packed; | |
2518 | ||
2519 | /* Set USB type-C port role and muxes */ | |
2520 | #define EC_CMD_USB_PD_CONTROL 0x101 | |
2521 | ||
2522 | enum usb_pd_control_role { | |
2523 | USB_PD_CTRL_ROLE_NO_CHANGE = 0, | |
2524 | USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ | |
2525 | USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, | |
2526 | USB_PD_CTRL_ROLE_FORCE_SINK = 3, | |
2527 | USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, | |
2528 | }; | |
2529 | ||
2530 | enum usb_pd_control_mux { | |
2531 | USB_PD_CTRL_MUX_NO_CHANGE = 0, | |
2532 | USB_PD_CTRL_MUX_NONE = 1, | |
2533 | USB_PD_CTRL_MUX_USB = 2, | |
2534 | USB_PD_CTRL_MUX_DP = 3, | |
2535 | USB_PD_CTRL_MUX_DOCK = 4, | |
2536 | USB_PD_CTRL_MUX_AUTO = 5, | |
2537 | }; | |
2538 | ||
2539 | struct ec_params_usb_pd_control { | |
2540 | uint8_t port; | |
2541 | uint8_t role; | |
2542 | uint8_t mux; | |
2543 | } __packed; | |
2544 | ||
2545 | /*****************************************************************************/ | |
2546 | /* | |
2547 | * Passthru commands | |
2548 | * | |
2549 | * Some platforms have sub-processors chained to each other. For example. | |
2550 | * | |
2551 | * AP <--> EC <--> PD MCU | |
2552 | * | |
2553 | * The top 2 bits of the command number are used to indicate which device the | |
2554 | * command is intended for. Device 0 is always the device receiving the | |
2555 | * command; other device mapping is board-specific. | |
2556 | * | |
2557 | * When a device receives a command to be passed to a sub-processor, it passes | |
2558 | * it on with the device number set back to 0. This allows the sub-processor | |
2559 | * to remain blissfully unaware of whether the command originated on the next | |
2560 | * device up the chain, or was passed through from the AP. | |
2561 | * | |
2562 | * In the above example, if the AP wants to send command 0x0002 to the PD MCU, | |
2563 | * AP sends command 0x4002 to the EC | |
2564 | * EC sends command 0x0002 to the PD MCU | |
2565 | * EC forwards PD MCU response back to the AP | |
2566 | */ | |
2567 | ||
2568 | /* Offset and max command number for sub-device n */ | |
2569 | #define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) | |
2570 | #define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) | |
2571 | ||
5271db29 BR |
2572 | /*****************************************************************************/ |
2573 | /* | |
2574 | * Deprecated constants. These constants have been renamed for clarity. The | |
2575 | * meaning and size has not changed. Programs that use the old names should | |
2576 | * switch to the new names soon, as the old names may not be carried forward | |
2577 | * forever. | |
2578 | */ | |
2579 | #define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE | |
2580 | #define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 | |
2581 | #define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE | |
2582 | ||
deaf39ef | 2583 | #endif /* __CROS_EC_COMMANDS_H */ |