Commit | Line | Data |
---|---|---|
00db8189 | 1 | /* |
00db8189 AF |
2 | * Framework and drivers for configuring and reading different PHYs |
3 | * Based on code in sungem_phy.c and gianfar_phy.c | |
4 | * | |
5 | * Author: Andy Fleming | |
6 | * | |
7 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify it | |
10 | * under the terms of the GNU General Public License as published by the | |
11 | * Free Software Foundation; either version 2 of the License, or (at your | |
12 | * option) any later version. | |
13 | * | |
14 | */ | |
15 | ||
16 | #ifndef __PHY_H | |
17 | #define __PHY_H | |
18 | ||
2220943a | 19 | #include <linux/compiler.h> |
00db8189 | 20 | #include <linux/spinlock.h> |
13df29f6 | 21 | #include <linux/ethtool.h> |
bac83c65 | 22 | #include <linux/mdio.h> |
13df29f6 | 23 | #include <linux/mii.h> |
3e3aaf64 | 24 | #include <linux/module.h> |
13df29f6 MR |
25 | #include <linux/timer.h> |
26 | #include <linux/workqueue.h> | |
8626d3b4 | 27 | #include <linux/mod_devicetable.h> |
00db8189 | 28 | |
60063497 | 29 | #include <linux/atomic.h> |
0ac49527 | 30 | |
e9fbdf17 | 31 | #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ |
00db8189 AF |
32 | SUPPORTED_TP | \ |
33 | SUPPORTED_MII) | |
34 | ||
e9fbdf17 FF |
35 | #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ |
36 | SUPPORTED_10baseT_Full) | |
37 | ||
38 | #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ | |
39 | SUPPORTED_100baseT_Full) | |
40 | ||
41 | #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ | |
00db8189 AF |
42 | SUPPORTED_1000baseT_Full) |
43 | ||
e9fbdf17 FF |
44 | #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \ |
45 | PHY_100BT_FEATURES | \ | |
46 | PHY_DEFAULT_FEATURES) | |
47 | ||
48 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ | |
49 | PHY_1000BT_FEATURES) | |
50 | ||
51 | ||
c5e38a94 AF |
52 | /* |
53 | * Set phydev->irq to PHY_POLL if interrupts are not supported, | |
00db8189 AF |
54 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
55 | * the attached driver handles the interrupt | |
56 | */ | |
57 | #define PHY_POLL -1 | |
58 | #define PHY_IGNORE_INTERRUPT -2 | |
59 | ||
60 | #define PHY_HAS_INTERRUPT 0x00000001 | |
61 | #define PHY_HAS_MAGICANEG 0x00000002 | |
4284b6a5 | 62 | #define PHY_IS_INTERNAL 0x00000004 |
00db8189 | 63 | |
e8a2b6a4 AF |
64 | /* Interface Mode definitions */ |
65 | typedef enum { | |
4157ef1b | 66 | PHY_INTERFACE_MODE_NA, |
e8a2b6a4 AF |
67 | PHY_INTERFACE_MODE_MII, |
68 | PHY_INTERFACE_MODE_GMII, | |
69 | PHY_INTERFACE_MODE_SGMII, | |
70 | PHY_INTERFACE_MODE_TBI, | |
2cc70ba4 | 71 | PHY_INTERFACE_MODE_REVMII, |
e8a2b6a4 AF |
72 | PHY_INTERFACE_MODE_RMII, |
73 | PHY_INTERFACE_MODE_RGMII, | |
a999589c | 74 | PHY_INTERFACE_MODE_RGMII_ID, |
7d400a4c KP |
75 | PHY_INTERFACE_MODE_RGMII_RXID, |
76 | PHY_INTERFACE_MODE_RGMII_TXID, | |
4157ef1b SG |
77 | PHY_INTERFACE_MODE_RTBI, |
78 | PHY_INTERFACE_MODE_SMII, | |
898dd0bd | 79 | PHY_INTERFACE_MODE_XGMII, |
fd70f72c | 80 | PHY_INTERFACE_MODE_MOCA, |
b9d12085 | 81 | PHY_INTERFACE_MODE_QSGMII, |
8a2fe56e | 82 | PHY_INTERFACE_MODE_MAX, |
e8a2b6a4 AF |
83 | } phy_interface_t; |
84 | ||
8a2fe56e FF |
85 | /** |
86 | * It maps 'enum phy_interface_t' found in include/linux/phy.h | |
87 | * into the device tree binding of 'phy-mode', so that Ethernet | |
88 | * device driver can get phy interface from device tree. | |
89 | */ | |
90 | static inline const char *phy_modes(phy_interface_t interface) | |
91 | { | |
92 | switch (interface) { | |
93 | case PHY_INTERFACE_MODE_NA: | |
94 | return ""; | |
95 | case PHY_INTERFACE_MODE_MII: | |
96 | return "mii"; | |
97 | case PHY_INTERFACE_MODE_GMII: | |
98 | return "gmii"; | |
99 | case PHY_INTERFACE_MODE_SGMII: | |
100 | return "sgmii"; | |
101 | case PHY_INTERFACE_MODE_TBI: | |
102 | return "tbi"; | |
103 | case PHY_INTERFACE_MODE_REVMII: | |
104 | return "rev-mii"; | |
105 | case PHY_INTERFACE_MODE_RMII: | |
106 | return "rmii"; | |
107 | case PHY_INTERFACE_MODE_RGMII: | |
108 | return "rgmii"; | |
109 | case PHY_INTERFACE_MODE_RGMII_ID: | |
110 | return "rgmii-id"; | |
111 | case PHY_INTERFACE_MODE_RGMII_RXID: | |
112 | return "rgmii-rxid"; | |
113 | case PHY_INTERFACE_MODE_RGMII_TXID: | |
114 | return "rgmii-txid"; | |
115 | case PHY_INTERFACE_MODE_RTBI: | |
116 | return "rtbi"; | |
117 | case PHY_INTERFACE_MODE_SMII: | |
118 | return "smii"; | |
119 | case PHY_INTERFACE_MODE_XGMII: | |
120 | return "xgmii"; | |
fd70f72c FF |
121 | case PHY_INTERFACE_MODE_MOCA: |
122 | return "moca"; | |
b9d12085 TP |
123 | case PHY_INTERFACE_MODE_QSGMII: |
124 | return "qsgmii"; | |
8a2fe56e FF |
125 | default: |
126 | return "unknown"; | |
127 | } | |
128 | } | |
129 | ||
00db8189 | 130 | |
e8a2b6a4 | 131 | #define PHY_INIT_TIMEOUT 100000 |
00db8189 AF |
132 | #define PHY_STATE_TIME 1 |
133 | #define PHY_FORCE_TIMEOUT 10 | |
134 | #define PHY_AN_TIMEOUT 10 | |
135 | ||
e8a2b6a4 | 136 | #define PHY_MAX_ADDR 32 |
00db8189 | 137 | |
a4d00f17 | 138 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
9d9326d3 AF |
139 | #define PHY_ID_FMT "%s:%02x" |
140 | ||
141 | /* | |
142 | * Need to be a little smaller than phydev->dev.bus_id to leave room | |
143 | * for the ":%02x" | |
144 | */ | |
8e401ecc | 145 | #define MII_BUS_ID_SIZE (20 - 3) |
a4d00f17 | 146 | |
abf35df2 JG |
147 | /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit |
148 | IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ | |
149 | #define MII_ADDR_C45 (1<<30) | |
150 | ||
313162d0 PG |
151 | struct device; |
152 | struct sk_buff; | |
153 | ||
c5e38a94 AF |
154 | /* |
155 | * The Bus class for PHYs. Devices which provide access to | |
156 | * PHYs should register using this structure | |
157 | */ | |
00db8189 | 158 | struct mii_bus { |
3e3aaf64 | 159 | struct module *owner; |
00db8189 | 160 | const char *name; |
9d9326d3 | 161 | char id[MII_BUS_ID_SIZE]; |
00db8189 | 162 | void *priv; |
ccaa953e AL |
163 | int (*read)(struct mii_bus *bus, int addr, int regnum); |
164 | int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); | |
00db8189 AF |
165 | int (*reset)(struct mii_bus *bus); |
166 | ||
c5e38a94 AF |
167 | /* |
168 | * A lock to ensure that only one thing can read/write | |
169 | * the MDIO bus at a time | |
170 | */ | |
35b5f6b1 | 171 | struct mutex mdio_lock; |
00db8189 | 172 | |
18ee49dd | 173 | struct device *parent; |
46abc021 LB |
174 | enum { |
175 | MDIOBUS_ALLOCATED = 1, | |
176 | MDIOBUS_REGISTERED, | |
177 | MDIOBUS_UNREGISTERED, | |
178 | MDIOBUS_RELEASED, | |
179 | } state; | |
180 | struct device dev; | |
00db8189 AF |
181 | |
182 | /* list of all PHYs on bus */ | |
183 | struct phy_device *phy_map[PHY_MAX_ADDR]; | |
184 | ||
c6883996 | 185 | /* PHY addresses to be ignored when probing */ |
f896424c MP |
186 | u32 phy_mask; |
187 | ||
922f2dd1 FF |
188 | /* PHY addresses to ignore the TA/read failure */ |
189 | u32 phy_ignore_ta_mask; | |
190 | ||
c5e38a94 | 191 | /* |
e7f4dc35 AL |
192 | * An array of interrupts, each PHY's interrupt at the index |
193 | * matching its address | |
c5e38a94 | 194 | */ |
e7f4dc35 | 195 | int irq[PHY_MAX_ADDR]; |
00db8189 | 196 | }; |
46abc021 | 197 | #define to_mii_bus(d) container_of(d, struct mii_bus, dev) |
00db8189 | 198 | |
eb8a54a7 TT |
199 | struct mii_bus *mdiobus_alloc_size(size_t); |
200 | static inline struct mii_bus *mdiobus_alloc(void) | |
201 | { | |
202 | return mdiobus_alloc_size(0); | |
203 | } | |
204 | ||
3e3aaf64 RK |
205 | int __mdiobus_register(struct mii_bus *bus, struct module *owner); |
206 | #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) | |
2e888103 LB |
207 | void mdiobus_unregister(struct mii_bus *bus); |
208 | void mdiobus_free(struct mii_bus *bus); | |
6d48f44b GS |
209 | struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); |
210 | static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) | |
211 | { | |
212 | return devm_mdiobus_alloc_size(dev, 0); | |
213 | } | |
214 | ||
215 | void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); | |
2e888103 | 216 | struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); |
2e888103 | 217 | |
e8a2b6a4 AF |
218 | #define PHY_INTERRUPT_DISABLED 0x0 |
219 | #define PHY_INTERRUPT_ENABLED 0x80000000 | |
00db8189 AF |
220 | |
221 | /* PHY state machine states: | |
222 | * | |
223 | * DOWN: PHY device and driver are not ready for anything. probe | |
224 | * should be called if and only if the PHY is in this state, | |
225 | * given that the PHY device exists. | |
226 | * - PHY driver probe function will, depending on the PHY, set | |
227 | * the state to STARTING or READY | |
228 | * | |
229 | * STARTING: PHY device is coming up, and the ethernet driver is | |
230 | * not ready. PHY drivers may set this in the probe function. | |
231 | * If they do, they are responsible for making sure the state is | |
232 | * eventually set to indicate whether the PHY is UP or READY, | |
233 | * depending on the state when the PHY is done starting up. | |
234 | * - PHY driver will set the state to READY | |
235 | * - start will set the state to PENDING | |
236 | * | |
237 | * READY: PHY is ready to send and receive packets, but the | |
238 | * controller is not. By default, PHYs which do not implement | |
239 | * probe will be set to this state by phy_probe(). If the PHY | |
240 | * driver knows the PHY is ready, and the PHY state is STARTING, | |
241 | * then it sets this STATE. | |
242 | * - start will set the state to UP | |
243 | * | |
244 | * PENDING: PHY device is coming up, but the ethernet driver is | |
245 | * ready. phy_start will set this state if the PHY state is | |
246 | * STARTING. | |
247 | * - PHY driver will set the state to UP when the PHY is ready | |
248 | * | |
249 | * UP: The PHY and attached device are ready to do work. | |
250 | * Interrupts should be started here. | |
251 | * - timer moves to AN | |
252 | * | |
253 | * AN: The PHY is currently negotiating the link state. Link is | |
254 | * therefore down for now. phy_timer will set this state when it | |
255 | * detects the state is UP. config_aneg will set this state | |
256 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. | |
257 | * - If autonegotiation finishes, but there's no link, it sets | |
258 | * the state to NOLINK. | |
259 | * - If aneg finishes with link, it sets the state to RUNNING, | |
260 | * and calls adjust_link | |
261 | * - If autonegotiation did not finish after an arbitrary amount | |
262 | * of time, autonegotiation should be tried again if the PHY | |
263 | * supports "magic" autonegotiation (back to AN) | |
264 | * - If it didn't finish, and no magic_aneg, move to FORCING. | |
265 | * | |
266 | * NOLINK: PHY is up, but not currently plugged in. | |
267 | * - If the timer notes that the link comes back, we move to RUNNING | |
268 | * - config_aneg moves to AN | |
269 | * - phy_stop moves to HALTED | |
270 | * | |
271 | * FORCING: PHY is being configured with forced settings | |
272 | * - if link is up, move to RUNNING | |
273 | * - If link is down, we drop to the next highest setting, and | |
274 | * retry (FORCING) after a timeout | |
275 | * - phy_stop moves to HALTED | |
276 | * | |
277 | * RUNNING: PHY is currently up, running, and possibly sending | |
278 | * and/or receiving packets | |
279 | * - timer will set CHANGELINK if we're polling (this ensures the | |
280 | * link state is polled every other cycle of this state machine, | |
281 | * which makes it every other second) | |
282 | * - irq will set CHANGELINK | |
283 | * - config_aneg will set AN | |
284 | * - phy_stop moves to HALTED | |
285 | * | |
286 | * CHANGELINK: PHY experienced a change in link state | |
287 | * - timer moves to RUNNING if link | |
288 | * - timer moves to NOLINK if the link is down | |
289 | * - phy_stop moves to HALTED | |
290 | * | |
291 | * HALTED: PHY is up, but no polling or interrupts are done. Or | |
292 | * PHY is in an error state. | |
293 | * | |
294 | * - phy_start moves to RESUMING | |
295 | * | |
296 | * RESUMING: PHY was halted, but now wants to run again. | |
297 | * - If we are forcing, or aneg is done, timer moves to RUNNING | |
298 | * - If aneg is not done, timer moves to AN | |
299 | * - phy_stop moves to HALTED | |
300 | */ | |
301 | enum phy_state { | |
4017b4d3 | 302 | PHY_DOWN = 0, |
00db8189 AF |
303 | PHY_STARTING, |
304 | PHY_READY, | |
305 | PHY_PENDING, | |
306 | PHY_UP, | |
307 | PHY_AN, | |
308 | PHY_RUNNING, | |
309 | PHY_NOLINK, | |
310 | PHY_FORCING, | |
311 | PHY_CHANGELINK, | |
312 | PHY_HALTED, | |
313 | PHY_RESUMING | |
314 | }; | |
315 | ||
ac28b9f8 DD |
316 | /** |
317 | * struct phy_c45_device_ids - 802.3-c45 Device Identifiers | |
318 | * @devices_in_package: Bit vector of devices present. | |
319 | * @device_ids: The device identifer for each present device. | |
320 | */ | |
321 | struct phy_c45_device_ids { | |
322 | u32 devices_in_package; | |
323 | u32 device_ids[8]; | |
324 | }; | |
c1f19b51 | 325 | |
00db8189 AF |
326 | /* phy_device: An instance of a PHY |
327 | * | |
328 | * drv: Pointer to the driver for this PHY instance | |
329 | * bus: Pointer to the bus this PHY is on | |
330 | * dev: driver model device structure for this PHY | |
331 | * phy_id: UID for this device found during discovery | |
ac28b9f8 DD |
332 | * c45_ids: 802.3-c45 Device Identifers if is_c45. |
333 | * is_c45: Set to true if this phy uses clause 45 addressing. | |
4284b6a5 | 334 | * is_internal: Set to true if this phy is internal to a MAC. |
5a11dd7d | 335 | * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. |
aae88261 | 336 | * has_fixups: Set to true if this phy has fixups/quirks. |
8a477a6f | 337 | * suspended: Set to true if this phy has been suspended successfully. |
00db8189 AF |
338 | * state: state of the PHY for management purposes |
339 | * dev_flags: Device-specific flags used by the PHY driver. | |
340 | * addr: Bus address of PHY | |
341 | * link_timeout: The number of timer firings to wait before the | |
342 | * giving up on the current attempt at acquiring a link | |
343 | * irq: IRQ number of the PHY's interrupt (-1 if none) | |
344 | * phy_timer: The timer for handling the state machine | |
345 | * phy_queue: A work_queue for the interrupt | |
346 | * attached_dev: The attached enet driver's device instance ptr | |
347 | * adjust_link: Callback for the enet controller to respond to | |
348 | * changes in the link state. | |
00db8189 | 349 | * |
114002bc FF |
350 | * speed, duplex, pause, supported, advertising, lp_advertising, |
351 | * and autoneg are used like in mii_if_info | |
00db8189 AF |
352 | * |
353 | * interrupts currently only supports enabled or disabled, | |
354 | * but could be changed in the future to support enabling | |
355 | * and disabling specific interrupts | |
356 | * | |
357 | * Contains some infrastructure for polling and interrupt | |
358 | * handling, as well as handling shifts in PHY hardware state | |
359 | */ | |
360 | struct phy_device { | |
e5a03bfd AL |
361 | struct mdio_device mdio; |
362 | ||
00db8189 AF |
363 | /* Information about the PHY type */ |
364 | /* And management functions */ | |
365 | struct phy_driver *drv; | |
366 | ||
00db8189 AF |
367 | u32 phy_id; |
368 | ||
ac28b9f8 DD |
369 | struct phy_c45_device_ids c45_ids; |
370 | bool is_c45; | |
4284b6a5 | 371 | bool is_internal; |
5a11dd7d | 372 | bool is_pseudo_fixed_link; |
b0ae009f | 373 | bool has_fixups; |
8a477a6f | 374 | bool suspended; |
ac28b9f8 | 375 | |
00db8189 AF |
376 | enum phy_state state; |
377 | ||
378 | u32 dev_flags; | |
379 | ||
e8a2b6a4 AF |
380 | phy_interface_t interface; |
381 | ||
c5e38a94 AF |
382 | /* |
383 | * forced speed & duplex (no autoneg) | |
00db8189 AF |
384 | * partner speed & duplex & pause (autoneg) |
385 | */ | |
386 | int speed; | |
387 | int duplex; | |
388 | int pause; | |
389 | int asym_pause; | |
390 | ||
391 | /* The most recently read link state */ | |
392 | int link; | |
393 | ||
394 | /* Enabled Interrupts */ | |
395 | u32 interrupts; | |
396 | ||
397 | /* Union of PHY and Attached devices' supported modes */ | |
398 | /* See mii.h for more info */ | |
399 | u32 supported; | |
400 | u32 advertising; | |
114002bc | 401 | u32 lp_advertising; |
00db8189 AF |
402 | |
403 | int autoneg; | |
404 | ||
405 | int link_timeout; | |
406 | ||
c5e38a94 AF |
407 | /* |
408 | * Interrupt number for this PHY | |
409 | * -1 means no interrupt | |
410 | */ | |
00db8189 AF |
411 | int irq; |
412 | ||
413 | /* private data pointer */ | |
414 | /* For use by PHYs to maintain extra state */ | |
415 | void *priv; | |
416 | ||
417 | /* Interrupt and Polling infrastructure */ | |
418 | struct work_struct phy_queue; | |
a390d1f3 | 419 | struct delayed_work state_queue; |
0ac49527 | 420 | atomic_t irq_disable; |
00db8189 | 421 | |
35b5f6b1 | 422 | struct mutex lock; |
00db8189 AF |
423 | |
424 | struct net_device *attached_dev; | |
425 | ||
634ec36c DT |
426 | u8 mdix; |
427 | ||
00db8189 | 428 | void (*adjust_link)(struct net_device *dev); |
00db8189 | 429 | }; |
e5a03bfd AL |
430 | #define to_phy_device(d) container_of(to_mdio_device(d), \ |
431 | struct phy_device, mdio) | |
00db8189 AF |
432 | |
433 | /* struct phy_driver: Driver structure for a particular PHY type | |
434 | * | |
435 | * phy_id: The result of reading the UID registers of this PHY | |
436 | * type, and ANDing them with the phy_id_mask. This driver | |
437 | * only works for PHYs with IDs which match this field | |
438 | * name: The friendly name of this PHY type | |
439 | * phy_id_mask: Defines the important bits of the phy_id | |
440 | * features: A list of features (speed, duplex, etc) supported | |
441 | * by this PHY | |
442 | * flags: A bitfield defining certain other features this PHY | |
443 | * supports (like interrupts) | |
860f6e9e | 444 | * driver_data: static driver data |
00db8189 AF |
445 | * |
446 | * The drivers must implement config_aneg and read_status. All | |
447 | * other functions are optional. Note that none of these | |
448 | * functions should be called from interrupt time. The goal is | |
449 | * for the bus read/write functions to be able to block when the | |
450 | * bus transaction is happening, and be freed up by an interrupt | |
451 | * (The MPC85xx has this ability, though it is not currently | |
452 | * supported in the driver). | |
453 | */ | |
454 | struct phy_driver { | |
455 | u32 phy_id; | |
456 | char *name; | |
457 | unsigned int phy_id_mask; | |
458 | u32 features; | |
459 | u32 flags; | |
860f6e9e | 460 | const void *driver_data; |
00db8189 | 461 | |
c5e38a94 | 462 | /* |
9df81dd7 FF |
463 | * Called to issue a PHY software reset |
464 | */ | |
465 | int (*soft_reset)(struct phy_device *phydev); | |
466 | ||
467 | /* | |
c5e38a94 AF |
468 | * Called to initialize the PHY, |
469 | * including after a reset | |
470 | */ | |
00db8189 AF |
471 | int (*config_init)(struct phy_device *phydev); |
472 | ||
c5e38a94 AF |
473 | /* |
474 | * Called during discovery. Used to set | |
475 | * up device-specific structures, if any | |
476 | */ | |
00db8189 AF |
477 | int (*probe)(struct phy_device *phydev); |
478 | ||
479 | /* PHY Power Management */ | |
480 | int (*suspend)(struct phy_device *phydev); | |
481 | int (*resume)(struct phy_device *phydev); | |
482 | ||
c5e38a94 AF |
483 | /* |
484 | * Configures the advertisement and resets | |
00db8189 AF |
485 | * autonegotiation if phydev->autoneg is on, |
486 | * forces the speed to the current settings in phydev | |
c5e38a94 AF |
487 | * if phydev->autoneg is off |
488 | */ | |
00db8189 AF |
489 | int (*config_aneg)(struct phy_device *phydev); |
490 | ||
76a423a3 FF |
491 | /* Determines the auto negotiation result */ |
492 | int (*aneg_done)(struct phy_device *phydev); | |
493 | ||
00db8189 AF |
494 | /* Determines the negotiated speed and duplex */ |
495 | int (*read_status)(struct phy_device *phydev); | |
496 | ||
497 | /* Clears any pending interrupts */ | |
498 | int (*ack_interrupt)(struct phy_device *phydev); | |
499 | ||
500 | /* Enables or disables interrupts */ | |
501 | int (*config_intr)(struct phy_device *phydev); | |
502 | ||
a8729eb3 AG |
503 | /* |
504 | * Checks if the PHY generated an interrupt. | |
505 | * For multi-PHY devices with shared PHY interrupt pin | |
506 | */ | |
507 | int (*did_interrupt)(struct phy_device *phydev); | |
508 | ||
00db8189 AF |
509 | /* Clears up any memory if needed */ |
510 | void (*remove)(struct phy_device *phydev); | |
511 | ||
a30e2c18 DD |
512 | /* Returns true if this is a suitable driver for the given |
513 | * phydev. If NULL, matching is based on phy_id and | |
514 | * phy_id_mask. | |
515 | */ | |
516 | int (*match_phy_device)(struct phy_device *phydev); | |
517 | ||
c8f3a8c3 RC |
518 | /* Handles ethtool queries for hardware time stamping. */ |
519 | int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti); | |
520 | ||
c1f19b51 RC |
521 | /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */ |
522 | int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr); | |
523 | ||
524 | /* | |
525 | * Requests a Rx timestamp for 'skb'. If the skb is accepted, | |
526 | * the phy driver promises to deliver it using netif_rx() as | |
527 | * soon as a timestamp becomes available. One of the | |
528 | * PTP_CLASS_ values is passed in 'type'. The function must | |
529 | * return true if the skb is accepted for delivery. | |
530 | */ | |
531 | bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
532 | ||
533 | /* | |
534 | * Requests a Tx timestamp for 'skb'. The phy driver promises | |
da92b194 | 535 | * to deliver it using skb_complete_tx_timestamp() as soon as a |
c1f19b51 RC |
536 | * timestamp becomes available. One of the PTP_CLASS_ values |
537 | * is passed in 'type'. | |
538 | */ | |
539 | void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type); | |
540 | ||
42e836eb MS |
541 | /* Some devices (e.g. qnap TS-119P II) require PHY register changes to |
542 | * enable Wake on LAN, so set_wol is provided to be called in the | |
543 | * ethernet driver's set_wol function. */ | |
544 | int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
545 | ||
546 | /* See set_wol, but for checking whether Wake on LAN is enabled. */ | |
547 | void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); | |
548 | ||
2b8f2a28 DM |
549 | /* |
550 | * Called to inform a PHY device driver when the core is about to | |
551 | * change the link state. This callback is supposed to be used as | |
552 | * fixup hook for drivers that need to take action when the link | |
553 | * state changes. Drivers are by no means allowed to mess with the | |
554 | * PHY device structure in their implementations. | |
555 | */ | |
556 | void (*link_change_notify)(struct phy_device *dev); | |
557 | ||
0c1d77df VB |
558 | /* A function provided by a phy specific driver to override the |
559 | * the PHY driver framework support for reading a MMD register | |
560 | * from the PHY. If not supported, return -1. This function is | |
561 | * optional for PHY specific drivers, if not provided then the | |
562 | * default MMD read function is used by the PHY framework. | |
563 | */ | |
564 | int (*read_mmd_indirect)(struct phy_device *dev, int ptrad, | |
565 | int devnum, int regnum); | |
566 | ||
567 | /* A function provided by a phy specific driver to override the | |
568 | * the PHY driver framework support for writing a MMD register | |
569 | * from the PHY. This function is optional for PHY specific drivers, | |
570 | * if not provided then the default MMD read function is used by | |
571 | * the PHY framework. | |
572 | */ | |
573 | void (*write_mmd_indirect)(struct phy_device *dev, int ptrad, | |
574 | int devnum, int regnum, u32 val); | |
575 | ||
2f438366 ES |
576 | /* Get the size and type of the eeprom contained within a plug-in |
577 | * module */ | |
578 | int (*module_info)(struct phy_device *dev, | |
579 | struct ethtool_modinfo *modinfo); | |
580 | ||
581 | /* Get the eeprom information from the plug-in module */ | |
582 | int (*module_eeprom)(struct phy_device *dev, | |
583 | struct ethtool_eeprom *ee, u8 *data); | |
584 | ||
f3a40945 AL |
585 | /* Get statistics from the phy using ethtool */ |
586 | int (*get_sset_count)(struct phy_device *dev); | |
587 | void (*get_strings)(struct phy_device *dev, u8 *data); | |
588 | void (*get_stats)(struct phy_device *dev, | |
589 | struct ethtool_stats *stats, u64 *data); | |
590 | ||
00db8189 AF |
591 | struct device_driver driver; |
592 | }; | |
593 | #define to_phy_driver(d) container_of(d, struct phy_driver, driver) | |
594 | ||
f62220d3 AF |
595 | #define PHY_ANY_ID "MATCH ANY PHY" |
596 | #define PHY_ANY_UID 0xffffffff | |
597 | ||
598 | /* A Structure for boards to register fixups with the PHY Lib */ | |
599 | struct phy_fixup { | |
600 | struct list_head list; | |
8e401ecc | 601 | char bus_id[20]; |
f62220d3 AF |
602 | u32 phy_uid; |
603 | u32 phy_uid_mask; | |
604 | int (*run)(struct phy_device *phydev); | |
605 | }; | |
606 | ||
efabdfb9 AF |
607 | /** |
608 | * phy_read_mmd - Convenience function for reading a register | |
609 | * from an MMD on a given PHY. | |
610 | * @phydev: The phy_device struct | |
611 | * @devad: The MMD to read from | |
612 | * @regnum: The register on the MMD to read | |
613 | * | |
614 | * Same rules as for phy_read(); | |
615 | */ | |
616 | static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) | |
617 | { | |
618 | if (!phydev->is_c45) | |
619 | return -EOPNOTSUPP; | |
620 | ||
e5a03bfd | 621 | return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, |
efabdfb9 AF |
622 | MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff)); |
623 | } | |
624 | ||
66ce7fb9 FF |
625 | /** |
626 | * phy_read_mmd_indirect - reads data from the MMD registers | |
627 | * @phydev: The PHY device bus | |
628 | * @prtad: MMD Address | |
66ce7fb9 FF |
629 | * @addr: PHY address on the MII bus |
630 | * | |
631 | * Description: it reads data from the MMD registers (clause 22 to access to | |
632 | * clause 45) of the specified phy address. | |
633 | */ | |
053e7e16 | 634 | int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad); |
66ce7fb9 | 635 | |
2e888103 LB |
636 | /** |
637 | * phy_read - Convenience function for reading a given PHY register | |
638 | * @phydev: the phy_device struct | |
639 | * @regnum: register number to read | |
640 | * | |
641 | * NOTE: MUST NOT be called from interrupt context, | |
642 | * because the bus read/write functions may wait for an interrupt | |
643 | * to conclude the operation. | |
644 | */ | |
abf35df2 | 645 | static inline int phy_read(struct phy_device *phydev, u32 regnum) |
2e888103 | 646 | { |
e5a03bfd | 647 | return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); |
2e888103 LB |
648 | } |
649 | ||
650 | /** | |
651 | * phy_write - Convenience function for writing a given PHY register | |
652 | * @phydev: the phy_device struct | |
653 | * @regnum: register number to write | |
654 | * @val: value to write to @regnum | |
655 | * | |
656 | * NOTE: MUST NOT be called from interrupt context, | |
657 | * because the bus read/write functions may wait for an interrupt | |
658 | * to conclude the operation. | |
659 | */ | |
abf35df2 | 660 | static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) |
2e888103 | 661 | { |
e5a03bfd | 662 | return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); |
2e888103 LB |
663 | } |
664 | ||
2c7b4921 FF |
665 | /** |
666 | * phy_interrupt_is_valid - Convenience function for testing a given PHY irq | |
667 | * @phydev: the phy_device struct | |
668 | * | |
669 | * NOTE: must be kept in sync with addition/removal of PHY_POLL and | |
670 | * PHY_IGNORE_INTERRUPT | |
671 | */ | |
672 | static inline bool phy_interrupt_is_valid(struct phy_device *phydev) | |
673 | { | |
674 | return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; | |
675 | } | |
676 | ||
4284b6a5 FF |
677 | /** |
678 | * phy_is_internal - Convenience function for testing if a PHY is internal | |
679 | * @phydev: the phy_device struct | |
680 | */ | |
681 | static inline bool phy_is_internal(struct phy_device *phydev) | |
682 | { | |
683 | return phydev->is_internal; | |
684 | } | |
685 | ||
e463d88c FF |
686 | /** |
687 | * phy_interface_is_rgmii - Convenience function for testing if a PHY interface | |
688 | * is RGMII (all variants) | |
689 | * @phydev: the phy_device struct | |
690 | */ | |
691 | static inline bool phy_interface_is_rgmii(struct phy_device *phydev) | |
692 | { | |
693 | return phydev->interface >= PHY_INTERFACE_MODE_RGMII && | |
694 | phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID; | |
5a11dd7d FF |
695 | }; |
696 | ||
697 | /* | |
698 | * phy_is_pseudo_fixed_link - Convenience function for testing if this | |
699 | * PHY is the CPU port facing side of an Ethernet switch, or similar. | |
700 | * @phydev: the phy_device struct | |
701 | */ | |
702 | static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) | |
703 | { | |
704 | return phydev->is_pseudo_fixed_link; | |
e463d88c FF |
705 | } |
706 | ||
efabdfb9 AF |
707 | /** |
708 | * phy_write_mmd - Convenience function for writing a register | |
709 | * on an MMD on a given PHY. | |
710 | * @phydev: The phy_device struct | |
711 | * @devad: The MMD to read from | |
712 | * @regnum: The register on the MMD to read | |
713 | * @val: value to write to @regnum | |
714 | * | |
715 | * Same rules as for phy_write(); | |
716 | */ | |
717 | static inline int phy_write_mmd(struct phy_device *phydev, int devad, | |
718 | u32 regnum, u16 val) | |
719 | { | |
720 | if (!phydev->is_c45) | |
721 | return -EOPNOTSUPP; | |
722 | ||
723 | regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff); | |
724 | ||
e5a03bfd | 725 | return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); |
efabdfb9 AF |
726 | } |
727 | ||
66ce7fb9 FF |
728 | /** |
729 | * phy_write_mmd_indirect - writes data to the MMD registers | |
730 | * @phydev: The PHY device | |
731 | * @prtad: MMD Address | |
732 | * @devad: MMD DEVAD | |
66ce7fb9 FF |
733 | * @data: data to write in the MMD register |
734 | * | |
735 | * Description: Write data from the MMD registers of the specified | |
736 | * phy address. | |
737 | */ | |
738 | void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, | |
053e7e16 | 739 | int devad, u32 data); |
66ce7fb9 | 740 | |
ac28b9f8 | 741 | struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, |
4017b4d3 SS |
742 | bool is_c45, |
743 | struct phy_c45_device_ids *c45_ids); | |
ac28b9f8 | 744 | struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); |
4dea547f | 745 | int phy_device_register(struct phy_device *phy); |
38737e49 | 746 | void phy_device_remove(struct phy_device *phydev); |
2f5cb434 | 747 | int phy_init_hw(struct phy_device *phydev); |
481b5d93 SH |
748 | int phy_suspend(struct phy_device *phydev); |
749 | int phy_resume(struct phy_device *phydev); | |
4017b4d3 SS |
750 | struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, |
751 | phy_interface_t interface); | |
f8f76db1 | 752 | struct phy_device *phy_find_first(struct mii_bus *bus); |
257184d7 AF |
753 | int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, |
754 | u32 flags, phy_interface_t interface); | |
fa94f6d9 | 755 | int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
4017b4d3 SS |
756 | void (*handler)(struct net_device *), |
757 | phy_interface_t interface); | |
758 | struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, | |
759 | void (*handler)(struct net_device *), | |
760 | phy_interface_t interface); | |
e1393456 AF |
761 | void phy_disconnect(struct phy_device *phydev); |
762 | void phy_detach(struct phy_device *phydev); | |
763 | void phy_start(struct phy_device *phydev); | |
764 | void phy_stop(struct phy_device *phydev); | |
765 | int phy_start_aneg(struct phy_device *phydev); | |
766 | ||
e1393456 | 767 | int phy_stop_interrupts(struct phy_device *phydev); |
00db8189 | 768 | |
4017b4d3 SS |
769 | static inline int phy_read_status(struct phy_device *phydev) |
770 | { | |
00db8189 AF |
771 | return phydev->drv->read_status(phydev); |
772 | } | |
773 | ||
72ba48be | 774 | #define phydev_err(_phydev, format, args...) \ |
e5a03bfd | 775 | dev_err(&_phydev->mdio.dev, format, ##args) |
72ba48be AL |
776 | |
777 | #define phydev_dbg(_phydev, format, args...) \ | |
e5a03bfd | 778 | dev_dbg(&_phydev->mdio.dev, format, ##args); |
72ba48be | 779 | |
84eff6d1 AL |
780 | static inline const char *phydev_name(const struct phy_device *phydev) |
781 | { | |
e5a03bfd | 782 | return dev_name(&phydev->mdio.dev); |
84eff6d1 AL |
783 | } |
784 | ||
2220943a AL |
785 | void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) |
786 | __printf(2, 3); | |
787 | void phy_attached_info(struct phy_device *phydev); | |
af6b6967 | 788 | int genphy_config_init(struct phy_device *phydev); |
3fb69bca | 789 | int genphy_setup_forced(struct phy_device *phydev); |
00db8189 AF |
790 | int genphy_restart_aneg(struct phy_device *phydev); |
791 | int genphy_config_aneg(struct phy_device *phydev); | |
a9fa6e6a | 792 | int genphy_aneg_done(struct phy_device *phydev); |
00db8189 AF |
793 | int genphy_update_link(struct phy_device *phydev); |
794 | int genphy_read_status(struct phy_device *phydev); | |
0f0ca340 GC |
795 | int genphy_suspend(struct phy_device *phydev); |
796 | int genphy_resume(struct phy_device *phydev); | |
797ac071 | 797 | int genphy_soft_reset(struct phy_device *phydev); |
00db8189 | 798 | void phy_driver_unregister(struct phy_driver *drv); |
d5bf9071 | 799 | void phy_drivers_unregister(struct phy_driver *drv, int n); |
00db8189 | 800 | int phy_driver_register(struct phy_driver *new_driver); |
d5bf9071 | 801 | int phy_drivers_register(struct phy_driver *new_driver, int n); |
4f9c85a1 | 802 | void phy_state_machine(struct work_struct *work); |
5ea94e76 FF |
803 | void phy_change(struct work_struct *work); |
804 | void phy_mac_interrupt(struct phy_device *phydev, int new_link); | |
29935aeb | 805 | void phy_start_machine(struct phy_device *phydev); |
00db8189 AF |
806 | void phy_stop_machine(struct phy_device *phydev); |
807 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
808 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
4017b4d3 | 809 | int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); |
e1393456 AF |
810 | int phy_start_interrupts(struct phy_device *phydev); |
811 | void phy_print_status(struct phy_device *phydev); | |
6f4a7f41 | 812 | void phy_device_free(struct phy_device *phydev); |
f3a6bd39 | 813 | int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); |
00db8189 | 814 | |
f62220d3 | 815 | int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 816 | int (*run)(struct phy_device *)); |
f62220d3 | 817 | int phy_register_fixup_for_id(const char *bus_id, |
4017b4d3 | 818 | int (*run)(struct phy_device *)); |
f62220d3 | 819 | int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, |
4017b4d3 | 820 | int (*run)(struct phy_device *)); |
f62220d3 | 821 | |
a59a4d19 GC |
822 | int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); |
823 | int phy_get_eee_err(struct phy_device *phydev); | |
824 | int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
825 | int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); | |
42e836eb | 826 | int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); |
4017b4d3 SS |
827 | void phy_ethtool_get_wol(struct phy_device *phydev, |
828 | struct ethtool_wolinfo *wol); | |
a59a4d19 | 829 | |
9b9a8bfc AF |
830 | int __init mdio_bus_init(void); |
831 | void mdio_bus_exit(void); | |
832 | ||
00db8189 | 833 | extern struct bus_type mdio_bus_type; |
c31accd1 JH |
834 | |
835 | /** | |
836 | * module_phy_driver() - Helper macro for registering PHY drivers | |
837 | * @__phy_drivers: array of PHY drivers to register | |
838 | * | |
839 | * Helper macro for PHY drivers which do not do anything special in module | |
840 | * init/exit. Each module may only use this macro once, and calling it | |
841 | * replaces module_init() and module_exit(). | |
842 | */ | |
843 | #define phy_module_driver(__phy_drivers, __count) \ | |
844 | static int __init phy_module_init(void) \ | |
845 | { \ | |
846 | return phy_drivers_register(__phy_drivers, __count); \ | |
847 | } \ | |
848 | module_init(phy_module_init); \ | |
849 | static void __exit phy_module_exit(void) \ | |
850 | { \ | |
851 | phy_drivers_unregister(__phy_drivers, __count); \ | |
852 | } \ | |
853 | module_exit(phy_module_exit) | |
854 | ||
855 | #define module_phy_driver(__phy_drivers) \ | |
856 | phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) | |
857 | ||
00db8189 | 858 | #endif /* __PHY_H */ |