[deliverable/linux.git] / include / linux / usb / usb338x.h

/*
 * USB 338x super/high/full speed USB device controller.
 * Unlike many such controllers, this one talks PCI.
 *
 * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
 * Copyright (C) 2003 David Brownell
 * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef __LINUX_USB_USB338X_H
#define __LINUX_USB_USB338X_H

#include <linux/usb/net2280.h>

/*
 * Extra defined bits for net2280 registers
 */
#define     SCRATCH			      0x0b

#define     DEFECT7374_FSM_FIELD                28
#define     SUPER_SPEED				 8
#define     DMA_REQUEST_OUTSTANDING              5
#define     DMA_PAUSE_DONE_INTERRUPT            26
#define     SET_ISOCHRONOUS_DELAY               24
#define     SET_SEL                             22
#define     SUPER_SPEED_MODE                     8

/*ep_cfg*/
#define     MAX_BURST_SIZE                      24
#define     EP_FIFO_BYTE_COUNT                  16
#define     IN_ENDPOINT_ENABLE                  14
#define     IN_ENDPOINT_TYPE                    12
#define     OUT_ENDPOINT_ENABLE                 10
#define     OUT_ENDPOINT_TYPE                    8

struct usb338x_usb_ext_regs {
	u32     usbclass;
#define     DEVICE_PROTOCOL                     16
#define     DEVICE_SUB_CLASS                     8
#define     DEVICE_CLASS                         0
	u32     ss_sel;
#define     U2_SYSTEM_EXIT_LATENCY               8
#define     U1_SYSTEM_EXIT_LATENCY               0
	u32     ss_del;
#define     U2_DEVICE_EXIT_LATENCY               8
#define     U1_DEVICE_EXIT_LATENCY               0
	u32     usb2lpm;
#define     USB_L1_LPM_HIRD                      2
#define     USB_L1_LPM_REMOTE_WAKE               1
#define     USB_L1_LPM_SUPPORT                   0
	u32     usb3belt;
#define     BELT_MULTIPLIER                     10
#define     BEST_EFFORT_LATENCY_TOLERANCE        0
	u32     usbctl2;
#define     LTM_ENABLE                           7
#define     U2_ENABLE                            6
#define     U1_ENABLE                            5
#define     FUNCTION_SUSPEND                     4
#define     USB3_CORE_ENABLE                     3
#define     USB2_CORE_ENABLE                     2
#define     SERIAL_NUMBER_STRING_ENABLE          0
	u32     in_timeout;
#define     GPEP3_TIMEOUT                       19
#define     GPEP2_TIMEOUT                       18
#define     GPEP1_TIMEOUT                       17
#define     GPEP0_TIMEOUT                       16
#define     GPEP3_TIMEOUT_VALUE                 13
#define     GPEP3_TIMEOUT_ENABLE                12
#define     GPEP2_TIMEOUT_VALUE                  9
#define     GPEP2_TIMEOUT_ENABLE                 8
#define     GPEP1_TIMEOUT_VALUE                  5
#define     GPEP1_TIMEOUT_ENABLE                 4
#define     GPEP0_TIMEOUT_VALUE                  1
#define     GPEP0_TIMEOUT_ENABLE                 0
	u32     isodelay;
#define     ISOCHRONOUS_DELAY                    0
} __packed;

struct usb338x_fifo_regs {
	/* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
	u32     ep_fifo_size_base;
#define     IN_FIFO_BASE_ADDRESS                                22
#define     IN_FIFO_SIZE                                        16
#define     OUT_FIFO_BASE_ADDRESS                               6
#define     OUT_FIFO_SIZE                                       0
	u32     ep_fifo_out_wrptr;
	u32     ep_fifo_out_rdptr;
	u32     ep_fifo_in_wrptr;
	u32     ep_fifo_in_rdptr;
	u32     unused[3];
} __packed;


/* Link layer */
struct usb338x_ll_regs {
	/* offset 0x700 */
	u32   ll_ltssm_ctrl1;
	u32   ll_ltssm_ctrl2;
	u32   ll_ltssm_ctrl3;
	u32   unused[2];
	u32   ll_general_ctrl0;
	u32   ll_general_ctrl1;
#define     PM_U3_AUTO_EXIT                                     29
#define     PM_U2_AUTO_EXIT                                     28
#define     PM_U1_AUTO_EXIT                                     27
#define     PM_FORCE_U2_ENTRY                                   26
#define     PM_FORCE_U1_ENTRY                                   25
#define     PM_LGO_COLLISION_SEND_LAU                           24
#define     PM_DIR_LINK_REJECT                                  23
#define     PM_FORCE_LINK_ACCEPT                                22
#define     PM_DIR_ENTRY_U3                                     20
#define     PM_DIR_ENTRY_U2                                     19
#define     PM_DIR_ENTRY_U1                                     18
#define     PM_U2_ENABLE                                        17
#define     PM_U1_ENABLE                                        16
#define     SKP_THRESHOLD_ADJUST_FMW                            8
#define     RESEND_DPP_ON_LRTY_FMW                              7
#define     DL_BIT_VALUE_FMW                                    6
#define     FORCE_DL_BIT                                        5
	u32   ll_general_ctrl2;
#define     SELECT_INVERT_LANE_POLARITY                         7
#define     FORCE_INVERT_LANE_POLARITY                          6
	u32   ll_general_ctrl3;
	u32   ll_general_ctrl4;
	u32   ll_error_gen;
} __packed;

struct usb338x_ll_lfps_regs {
	/* offset 0x748 */
	u32   ll_lfps_5;
#define     TIMER_LFPS_6US                                      16
	u32   ll_lfps_6;
#define     TIMER_LFPS_80US                                     0
} __packed;

struct usb338x_ll_tsn_regs {
	/* offset 0x77C */
	u32   ll_tsn_counters_2;
#define     HOT_TX_NORESET_TS2                                  24
	u32   ll_tsn_counters_3;
#define     HOT_RX_RESET_TS2                                    0
} __packed;

struct usb338x_ll_chi_regs {
	/* offset 0x79C */
	u32   ll_tsn_chicken_bit;
#define     RECOVERY_IDLE_TO_RECOVER_FMW                        3
} __packed;

/* protocol layer */
struct usb338x_pl_regs {
	/* offset 0x800 */
	u32   pl_reg_1;
	u32   pl_reg_2;
	u32   pl_reg_3;
	u32   pl_reg_4;
	u32   pl_ep_ctrl;
	/* Protocol Layer Endpoint Control*/
#define     PL_EP_CTRL                                  0x810
#define     ENDPOINT_SELECT                             0
	/* [4:0] */
#define     EP_INITIALIZED                              16
#define     SEQUENCE_NUMBER_RESET                       17
#define     CLEAR_ACK_ERROR_CODE                        20
	u32   pl_reg_6;
	u32   pl_reg_7;
	u32   pl_reg_8;
	u32   pl_ep_status_1;
	/* Protocol Layer Endpoint Status 1*/
#define     PL_EP_STATUS_1                              0x820
#define     STATE                                       16
#define     ACK_GOOD_NORMAL                             0x11
#define     ACK_GOOD_MORE_ACKS_TO_COME                  0x16
	u32   pl_ep_status_2;
	u32   pl_ep_status_3;
	/* Protocol Layer Endpoint Status 3*/
#define     PL_EP_STATUS_3                              0x828
#define     SEQUENCE_NUMBER                             0
	u32   pl_ep_status_4;
	/* Protocol Layer Endpoint Status 4*/
#define     PL_EP_STATUS_4                              0x82c
	u32   pl_ep_cfg_4;
	/* Protocol Layer Endpoint Configuration 4*/
#define     PL_EP_CFG_4                                 0x830
#define     NON_CTRL_IN_TOLERATE_BAD_DIR                6
} __packed;

#endif /* __LINUX_USB_USB338X_H */
Commit	Line	Data
adc82f77 RRD	1	/*
	2	* USB 338x super/high/full speed USB device controller.
	3	* Unlike many such controllers, this one talks PCI.
	4	*
	5	* Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
	6	* Copyright (C) 2003 David Brownell
	7	* Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2 of the License, or
	12	* (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	*/
	20
	21	#ifndef __LINUX_USB_USB338X_H
	22	#define __LINUX_USB_USB338X_H
	23
	24	#include <linux/usb/net2280.h>
	25
	26	/*
	27	* Extra defined bits for net2280 registers
	28	*/
	29	#define SCRATCH 0x0b
	30
	31	#define DEFECT7374_FSM_FIELD 28
	32	#define SUPER_SPEED 8
	33	#define DMA_REQUEST_OUTSTANDING 5
	34	#define DMA_PAUSE_DONE_INTERRUPT 26
	35	#define SET_ISOCHRONOUS_DELAY 24
	36	#define SET_SEL 22
	37	#define SUPER_SPEED_MODE 8
	38
	39	/ep_cfg/
	40	#define MAX_BURST_SIZE 24
	41	#define EP_FIFO_BYTE_COUNT 16
	42	#define IN_ENDPOINT_ENABLE 14
	43	#define IN_ENDPOINT_TYPE 12
	44	#define OUT_ENDPOINT_ENABLE 10
	45	#define OUT_ENDPOINT_TYPE 8
	46
	47	struct usb338x_usb_ext_regs {
	48	u32 usbclass;
	49	#define DEVICE_PROTOCOL 16
	50	#define DEVICE_SUB_CLASS 8
	51	#define DEVICE_CLASS 0
	52	u32 ss_sel;
	53	#define U2_SYSTEM_EXIT_LATENCY 8
	54	#define U1_SYSTEM_EXIT_LATENCY 0
	55	u32 ss_del;
	56	#define U2_DEVICE_EXIT_LATENCY 8
	57	#define U1_DEVICE_EXIT_LATENCY 0
	58	u32 usb2lpm;
	59	#define USB_L1_LPM_HIRD 2
	60	#define USB_L1_LPM_REMOTE_WAKE 1
	61	#define USB_L1_LPM_SUPPORT 0
	62	u32 usb3belt;
	63	#define BELT_MULTIPLIER 10
	64	#define BEST_EFFORT_LATENCY_TOLERANCE 0
65	u32 usbctl2;
66	#define LTM_ENABLE 7
67	#define U2_ENABLE 6
68	#define U1_ENABLE 5
69	#define FUNCTION_SUSPEND 4
70	#define USB3_CORE_ENABLE 3
71	#define USB2_CORE_ENABLE 2
72	#define SERIAL_NUMBER_STRING_ENABLE 0
73	u32 in_timeout;
74	#define GPEP3_TIMEOUT 19
75	#define GPEP2_TIMEOUT 18
76	#define GPEP1_TIMEOUT 17
77	#define GPEP0_TIMEOUT 16
78	#define GPEP3_TIMEOUT_VALUE 13
79	#define GPEP3_TIMEOUT_ENABLE 12
80	#define GPEP2_TIMEOUT_VALUE 9
81	#define GPEP2_TIMEOUT_ENABLE 8
82	#define GPEP1_TIMEOUT_VALUE 5
83	#define GPEP1_TIMEOUT_ENABLE 4
84	#define GPEP0_TIMEOUT_VALUE 1
85	#define GPEP0_TIMEOUT_ENABLE 0
86	u32 isodelay;
87	#define ISOCHRONOUS_DELAY 0
88	} __packed;
89
90	struct usb338x_fifo_regs {
91	/* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
92	u32 ep_fifo_size_base;
93	#define IN_FIFO_BASE_ADDRESS 22
94	#define IN_FIFO_SIZE 16
95	#define OUT_FIFO_BASE_ADDRESS 6
96	#define OUT_FIFO_SIZE 0
97	u32 ep_fifo_out_wrptr;
98	u32 ep_fifo_out_rdptr;
99	u32 ep_fifo_in_wrptr;
100	u32 ep_fifo_in_rdptr;
101	u32 unused[3];
102	} __packed;
103
104
105	/* Link layer */
106	struct usb338x_ll_regs {
107	/* offset 0x700 */
108	u32 ll_ltssm_ctrl1;
109	u32 ll_ltssm_ctrl2;
110	u32 ll_ltssm_ctrl3;
111	u32 unused[2];
112	u32 ll_general_ctrl0;
113	u32 ll_general_ctrl1;
114	#define PM_U3_AUTO_EXIT 29
115	#define PM_U2_AUTO_EXIT 28
116	#define PM_U1_AUTO_EXIT 27
117	#define PM_FORCE_U2_ENTRY 26
118	#define PM_FORCE_U1_ENTRY 25
119	#define PM_LGO_COLLISION_SEND_LAU 24
120	#define PM_DIR_LINK_REJECT 23
121	#define PM_FORCE_LINK_ACCEPT 22
122	#define PM_DIR_ENTRY_U3 20
123	#define PM_DIR_ENTRY_U2 19
124	#define PM_DIR_ENTRY_U1 18
125	#define PM_U2_ENABLE 17
126	#define PM_U1_ENABLE 16
127	#define SKP_THRESHOLD_ADJUST_FMW 8
128	#define RESEND_DPP_ON_LRTY_FMW 7
129	#define DL_BIT_VALUE_FMW 6
130	#define FORCE_DL_BIT 5
131	u32 ll_general_ctrl2;
132	#define SELECT_INVERT_LANE_POLARITY 7
133	#define FORCE_INVERT_LANE_POLARITY 6
134	u32 ll_general_ctrl3;
135	u32 ll_general_ctrl4;
136	u32 ll_error_gen;
137	} __packed;
138
139	struct usb338x_ll_lfps_regs {
140	/* offset 0x748 */
141	u32 ll_lfps_5;
142	#define TIMER_LFPS_6US 16
143	u32 ll_lfps_6;
144	#define TIMER_LFPS_80US 0
145	} __packed;
146
147	struct usb338x_ll_tsn_regs {
148	/* offset 0x77C */
149	u32 ll_tsn_counters_2;
150	#define HOT_TX_NORESET_TS2 24
151	u32 ll_tsn_counters_3;
152	#define HOT_RX_RESET_TS2 0
153	} __packed;
154
155	struct usb338x_ll_chi_regs {
156	/* offset 0x79C */
157	u32 ll_tsn_chicken_bit;
158	#define RECOVERY_IDLE_TO_RECOVER_FMW 3
159	} __packed;
160
161	/* protocol layer */
162	struct usb338x_pl_regs {
163	/* offset 0x800 */
164	u32 pl_reg_1;
165	u32 pl_reg_2;
166	u32 pl_reg_3;
167	u32 pl_reg_4;
168	u32 pl_ep_ctrl;
169	/* Protocol Layer Endpoint Control*/
170	#define PL_EP_CTRL 0x810
171	#define ENDPOINT_SELECT 0
172	/* [4:0] */
173	#define EP_INITIALIZED 16
174	#define SEQUENCE_NUMBER_RESET 17
175	#define CLEAR_ACK_ERROR_CODE 20
176	u32 pl_reg_6;
177	u32 pl_reg_7;
178	u32 pl_reg_8;
179	u32 pl_ep_status_1;
180	/* Protocol Layer Endpoint Status 1*/
181	#define PL_EP_STATUS_1 0x820
182	#define STATE 16
183	#define ACK_GOOD_NORMAL 0x11
184	#define ACK_GOOD_MORE_ACKS_TO_COME 0x16
185	u32 pl_ep_status_2;
186	u32 pl_ep_status_3;
187	/* Protocol Layer Endpoint Status 3*/
188	#define PL_EP_STATUS_3 0x828
189	#define SEQUENCE_NUMBER 0
190	u32 pl_ep_status_4;
191	/* Protocol Layer Endpoint Status 4*/
192	#define PL_EP_STATUS_4 0x82c
193	u32 pl_ep_cfg_4;
194	/* Protocol Layer Endpoint Configuration 4*/
195	#define PL_EP_CFG_4 0x830
196	#define NON_CTRL_IN_TOLERATE_BAD_DIR 6
197	} __packed;
198
199	#endif /* __LINUX_USB_USB338X_H */